Dem, so still no pics of the side design?
Full Design will be released just before delivery.
Do not like the design? I will refund
Will the LZ SE MP be compatible with H87a PCB?
https://shop.hineybush.com/product/h87a-gb
Will the LZ SE MP be compatible with H87a PCB?
https://shop.hineybush.com/product/h87a-gb
If it's compatible with a Leeku TKL PCB, it's probably compatible.
Will the LZ SE MP be compatible with H87a PCB?
https://shop.hineybush.com/product/h87a-gb
If it's compatible with a Leeku TKL PCB, it's probably compatible.
Right on. Was wondering about the option as an extra PCB.
FCFS spots also only for previous participants, or free for all?
Will the LZ SE MP be compatible with H87a PCB?
https://shop.hineybush.com/product/h87a-gb
Let's all get into the bubble.
Let's all get into the bubble.
What is this bubble you speak of?
Also, thanks for the reply about the PCB!
Let's all get into the bubble.
What is this bubble you speak of?
Also, thanks for the reply about the PCB!
The inside of the bubble is invisible. hahaha
Any possibility of an alps plate/pcb?
Any possibility of an alps plate/pcb?
alps plate is possible. but can not find alps tkl pcb.
Who can make alps pcb? haha
I’m sorry but if I’m understanding this correctly, at 8:00am korean time on the 25th I can choose to either do FCFS if I’m confident or just do the raffle?
Or is it only a raffle?
Any possibility of an alps plate/pcb?
alps plate is possible. but can not find alps tkl pcb.
Who can make alps pcb? haha
yuktsi is doing/getting some for jane v2
How will number of raffle entries be calculated? I saw on your site before (I can’t find the link now) that it was 1 entry for being in 1 GB and 2 additional entries for every GB thereafter. Is this still the case?
So if I was in CLS sxh and 2x GH v2, would I get 5 entries?
Really hyped for this though, good luck everyone!
How will number of raffle entries be calculated? I saw on your site before (I can’t find the link now) that it was 1 entry for being in 1 GB and 2 additional entries for every GB thereafter. Is this still the case?
So if I was in CLS sxh and 2x GH v2, would I get 5 entries?
Really hyped for this though, good luck everyone!
Will switch plates be compatible with previous TKL cases (CLS and GH-V2)?I’m sorry but if I’m understanding this correctly, at 8:00am korean time on the 25th I can choose to either do FCFS if I’m confident or just do the raffle?
Or is it only a raffle?
"Only participate in one of two ways."
Are those mutually exclusive?
How will number of raffle entries be calculated? I saw on your site before (I can’t find the link now) that it was 1 entry for being in 1 GB and 2 additional entries for every GB thereafter. Is this still the case?
So if I was in CLS sxh and 2x GH v2, would I get 5 entries?
Really hyped for this though, good luck everyone!
You can check the list and quantity of participating gb
I add a raffle ticket based on the participant's score.
I check the list of previous gb and invoices.
https://i.imgur.com/1sxJqCx.png
Will switch plates be compatible with previous TKL cases (CLS and GH-V2)?I’m sorry but if I’m understanding this correctly, at 8:00am korean time on the 25th I can choose to either do FCFS if I’m confident or just do the raffle?
Or is it only a raffle?
"Only participate in one of two ways."
Are those mutually exclusive?
gb If you are a participant, you can choose to participate. Both are available. If you win one, one will be canceled.
Just to confirm, LZ Iron does not qualify for this - Only CLS (X)?
Does B-Stock count? I was in for B stock CLS s x h and A stock CLS ms and Aftermarket CLS TKL.
2 days to go, good luck gentlemen, may Kagebunshinojutsu and RNGsus be with you.
How will number of raffle entries be calculated? I saw on your site before (I can’t find the link now) that it was 1 entry for being in 1 GB and 2 additional entries for every GB thereafter. Is this still the case?
So if I was in CLS sxh and 2x GH v2, would I get 5 entries?
Really hyped for this though, good luck everyone!
You can check the list and quantity of participating gb
I add a raffle ticket based on the participant's score.
I check the list of previous gb and invoices.
https://i.imgur.com/1sxJqCx.png
Thanks LZ.
I got a GH V2 in the GB and another in the extra's sale. Do I enter 1 or 2 on the form?
LZ, would the plate for this board be compatible with all your past projects?
welp. the instructions for this gb/fcfs/fifo/lifo/wth/omg/bbq couldn't get any more confusing.
welp. the instructions for this gb/fcfs/fifo/lifo/wth/omg/bbq couldn't get any more confusing.
From my understanding:
Opens at 8am KST:
If you've participated in a previous LZ buy, you can join the Raffle and have a shot that way, otherwise you're locked to FCFS 10 slots.
welp. the instructions for this gb/fcfs/fifo/lifo/wth/omg/bbq couldn't get any more confusing.
From my understanding:
Opens at 8am KST:
If you've participated in a previous LZ buy, you can join the Raffle and have a shot that way, otherwise you're locked to FCFS 10 slots.
what about normal people who haven’t ?
welp. the instructions for this gb/fcfs/fifo/lifo/wth/omg/bbq couldn't get any more confusing.
From my understanding:
Opens at 8am KST:
If you've participated in a previous LZ buy, you can join the Raffle and have a shot that way, otherwise you're locked to FCFS 10 slots.
what about normal people who haven’t ?
fcfs 10 slots
welp. the instructions for this gb/fcfs/fifo/lifo/wth/omg/bbq couldn't get any more confusing.
From my understanding:
Opens at 8am KST:
If you've participated in a previous LZ buy, you can join the Raffle and have a shot that way, otherwise you're locked to FCFS 10 slots.
what about normal people who haven’t ?
fcfs 10 slots
we can’t do the raffle?? tf
welp. the instructions for this gb/fcfs/fifo/lifo/wth/omg/bbq couldn't get any more confusing.
From my understanding:
Opens at 8am KST:
If you've participated in a previous LZ buy, you can join the Raffle and have a shot that way, otherwise you're locked to FCFS 10 slots.
welp. the instructions for this gb/fcfs/fifo/lifo/wth/omg/bbq couldn't get any more confusing.
From my understanding:
Opens at 8am KST:
If you've participated in a previous LZ buy, you can join the Raffle and have a shot that way, otherwise you're locked to FCFS 10 slots.
what about normal people who haven’t ?
fcfs 10 slots
we can’t do the raffle?? tf
idfk dude i wasn't even gonna try to get into this cause i've been spending all my money on my own design
! if it’s a public buy
! if it’s a public buy
should probably stop waiting then
I joined the raffle but the system forces me to select everything so I put i joined all the CLS GB. :'(
I joined the raffle but the system forces me to select everything so I put i joined all the CLS GB. :'(
LZ, TURN OFF RESPONSE VIEW on FORM
Hello LZ, I can't continue on the raffle form. Please add responses for 0 :-XShow Image(https://i.imgur.com/IwDZyZr.png)
Sorry about the error in the form. (Raffe Join)괜찮습니다, 감사해요. form을 다시 작성할까요 아니면 제가 이메일을 다시 드릴까요? :)
Please correct the order by e-mail.
sorry again.
o_O
If you fill out the application form again, we will delete the existing application.
Sorry for the inconvenience.
If you fill out the application form again, we will delete the existing application.
Sorry for the inconvenience.
Not fast enough for FCFS, praying to the raffle gods now
You can disregard my raffle post- got in FCFS ;D
I'm annoyed that I didn't get into FCFS when others did only by entering junk information.
At least my form was real.
This. Seriously.If you fill out the application form again, we will delete the existing application.
Sorry for the inconvenience.
LZ
could you please disable "See Previous Responses"?
It is unacceptable for a group buy runner to reveal private identifiable information.
If you fill out the application form again, we will delete the existing application.
Sorry for the inconvenience.
I'm annoyed that I didn't get into FCFS when others did only by entering junk information.
At least my form was real.
If you fill out the application form again, we will delete the existing application.
Sorry for the inconvenience.
If you fill out the application form again, we will delete the existing application.
Sorry for the inconvenience.
And now our personal information displays twice. Lol.
LZ, you gotta disable the previous responses, man.
I am very late in business for a few days on business trip.
There were some configuration problems. Sorry for the inconvenience.
Someone in FCFS used a method that is not honest. Canceled. q
Lesson learned - fill out any FCFS form with bull**** answers to automatically win.
I am very late in business for a few days on business trip.
There were some configuration problems. Sorry for the inconvenience.
Someone in FCFS used a method that is not honest. Canceled. q
May I request his slot?
Lesson learned - fill out any FCFS form with bull**** answers to automatically win.
It seems LZ canceled the entry that had bogus answers. Faith in humanity restored?
foking omegaLUL. u arent even the eleventh entry
Lesson learned - fill out any FCFS form with bull**** answers to automatically win.
It seems LZ canceled the entry that had bogus answers. Faith in humanity restored?
Yeah it was the funny combination of being able to see everyone's answers that showed us that at least 4-5 people left fields with junk answers. That's half the FCFS group. lol.
Fields with junk answers is all cancel.
I will open the empty slot again tomorrow.
What is the best time for you?
Fields with junk answers is all cancel.
I will open the empty slot again tomorrow.
What is the best time for you?
If you fill out the application form again, we will delete the existing application.
Sorry for the inconvenience.
this is why he allocated a bunch for the raffle.
you didn't need to write scripts or know how to code to enter for this. i didn't.
you should've bought one of his recent boards then. :) they're pretty nice.
you should've bought one of his recent boards then. :) they're pretty nice.
I've tried many times. :)
Fields with junk answers is all cancel.
I will open the empty slot again tomorrow.
What is the best time for you?
This.
Just move them to raffle slots, FCFS just doesnt work, now they have 24h to prepare scripts to fill out the stuff as they already know how ur order form works.
LZ CLS MS was still for sale last time i checked yesterday... his stuff is not hard to buy here.
Fields with junk answers is all cancel.
I will open the empty slot again tomorrow.
What is the best time for you?
If you fill out the application form again, we will delete the existing application.
Sorry for the inconvenience.
Thank you for your participation.
Winner, I send the final order form.
Your order can be edited.
good luck.
LZ, what happens with those of us who filled in the first raffle form and had to fill it in erroneously in order to be allowed to submit? For me and many of my fellow europeans, this took place at 1AM, thus I filled in the form, submitted and went back to sleep, thus I just this morning saw that the form has supposedly been updated and we should resubmit, but now the form is closed.
LZ, what happens with those of us who filled in the first raffle form and had to fill it in erroneously in order to be allowed to submit? For me and many of my fellow europeans, this took place at 1AM, thus I filled in the form, submitted and went back to sleep, thus I just this morning saw that the form has supposedly been updated and we should resubmit, but now the form is closed.
I have an invoice result because I have a list. I will summarize it.
Do not worry.
wait a min..... I got "This form is no longer accepting responses, and has been set to automatically close by.." does that mean I failed or wut?
wait a min..... I got "This form is no longer accepting responses, and has been set to automatically close by.." does that mean I failed or wut?
yes
Apart from the winners of the FCFS, does anyone else from the raffle know or have received an invoice?
Apart from the winners of the FCFS, does anyone else from the raffle know or have received an invoice?
I haven't heard anything yet, was wondering the same.
Have FCFS invoices gone out?
I just assumed I lost, I have horrible luck with raffles.
Just got an email.
I was chosen :O
I got an invitation to edit form via email but maybe it went out to all spot winners regardless of fcfs or raffle?
Is the google form linked on the email? I tried following the reorder link provided on the email and it takes me to a page saying closed. Thanks in advance!I got an invitation to edit form via email but maybe it went out to all spot winners regardless of fcfs or raffle?
The form is for both raffle and FCFS entrants. The link to view the Google sheet only shows FCFS so just complete the Google form and then LZ will edit the Google Doc with the raffle entrants.
Is the google form linked on the email? I tried following the reorder link provided on the email and it takes me to a page saying closed. Thanks in advance!I got an invitation to edit form via email but maybe it went out to all spot winners regardless of fcfs or raffle?
The form is for both raffle and FCFS entrants. The link to view the Google sheet only shows FCFS so just complete the Google form and then LZ will edit the Google Doc with the raffle entrants.
Incoming "got an invoice" posts.
The part where it's asking for a 5 digit number, is this supposed to be filled in the same box as our phone number or in the box that asks for a 5 digit number?
Re-order form seems back up again for winners who haven't gotten their entries in yet.
@LZ
What is the difference between universal and ANSI plates? Also is the silver the same silver on CLS TKL?
god bless
Re-order form seems back up again for winners who haven't gotten their entries in yet.
Where are we supposed to find that re-order form link? I only got a link to a Google spreadsheet.
Re-order form seems back up again for winners who haven't gotten their entries in yet.
Where are we supposed to find that re-order form link? I only got a link to a Google spreadsheet.
LZ sent two emails to winners earlier this morning. I found the link to both the order check doc and the re-order form on the first email and just a link to the doc on the second email.
I'm confused about "5 digits after phone number". Can someone explain this?
Edit: Nvm, figured it out
Sent from my ASUS_Z01QD using Tapatalk
wtb a spot :(
Just fyi for those unpaid, payment deadline is Nov 7, 2018 per google spreadsheet
I asked the same question. It's today.Just fyi for those unpaid, payment deadline is Nov 7, 2018 per google spreadsheet
Hey LZ, my actual invoice specifies a due date of Nov 13th. Could you clarify which of these dates is the actual deadline please?
Let me get your invoice if you cant pay pls :-*Just fyi for those unpaid, payment deadline is Nov 7, 2018 per google spreadsheet
Hey LZ, my actual invoice specifies a due date of Nov 13th. Could you clarify which of these dates is the actual deadline please?
...
Let me get your invoice if you cant pay pls :-*
...
...
1 person 1 unit
spot sales are not allowed.
...
Please request for extension if needed.
If the due date is over, it will be canceled and the order will be forwarded to the waiting person.
...
A ray of hope emerges that I may still get a spot....
Let me get your invoice if you cant pay pls :-*
......
1 person 1 unit
spot sales are not allowed.
...
Please request for extension if needed.
If the due date is over, it will be canceled and the order will be forwarded to the waiting person.
...
As long as you entered they may still be hope, but I doubt you'll be able to just buy a slot.
(Attachment Link)
LZ MP Switch plate Order for Participants
Change Order or Add Order
Half Switch plate
Order
https://goo.gl/forms/6uhZfVfjdC2VYTn92
and
I still under review.
Alps Switch plate with Alps PCB
(I seem to recall stories of PC switch plates cracking)
LZ, will the half plate fit in GHv2? If so, can non MP participants join for a half plate?Plates are compatible with CLS and GH v2.
(I seem to recall stories of PC switch plates cracking)
Nah they're quite durable, I wouldn't worry. Just don't ragequit and slam your fist on the keys, but if you do you'll probably ruin the PCB before the polycarb.
If you haven't used one, I highly recommend trying a half plate at least once.
Hey LZ
I noticed that PC and STS are listed under the ALU options, is this a formatting error? If so, I'm in for a PC half plate. TY <3
(Attachment Link)
Can you get only half plate or you need to get non half plate also?
Since on the spreadsheet, it's Alu(Red) + (H) - I'm assuming both due to the plus sign
Can you get only half plate or you need to get non half plate also?
Since on the spreadsheet, it's Alu(Red) + (H) - I'm assuming both due to the plus sign
It probably means red and half? If you selected "order change" in the form you're getting half plate only.
Hi LZ,
I resubmitted the plate order form. Please use my most recent submission.
Thanks,
hayt
https://lzlife.tistory.com/409
https://lzlife.tistory.com/409oh **** that's looking sharp (literally). getting really geeked for this
https://lzlife.tistory.com/409
https://lzlife.tistory.com/409 (https://lzlife.tistory.com/409)
looks like a jane corner
https://lzlife.tistory.com/409 (https://lzlife.tistory.com/409)
looks like a jane corner
not really, more like a Whale
https://lzlife.tistory.com/409
HYPEE
https://lzlife.tistory.com/409 (https://lzlife.tistory.com/409)
looks like a jane corner
not really, more like a Whale
on second look makes me think corsa as well
i guess we'll know once it ships, eh
https://lzlife.tistory.com/409remind me of lz-re or lz-sq
Considering this was named LZ *SE* MP in IC stage. I think we might see this
https://imgur.com/a/zocK1TY
Similar to our MP
Photo credit: https://www.flickr.com/photos/jkomusin/32339115107/Show Image(https://farm8.staticflickr.com/7891/47302097012_929e00895b_k.jpg)
Similar to our MP
Photo credit: https://www.flickr.com/photos/jkomusin/32339115107/Show Image(https://farm8.staticflickr.com/7891/47302097012_929e00895b_k.jpg)
thats a whale and i don't think MP will look like this at all
Similar to our MP
Photo credit: https://www.flickr.com/photos/jkomusin/32339115107/Show Image(https://farm8.staticflickr.com/7891/47302097012_929e00895b_k.jpg)
thats a whale and i don't think MP will look like this at all
MP >> whale
Similar to our MP
Photo credit: https://www.flickr.com/photos/jkomusin/32339115107/Show Image(https://farm8.staticflickr.com/7891/47302097012_929e00895b_k.jpg)
thats a whale and i don't think MP will look like this at all
MP >> whale
fact
Similar to our MP
Photo credit: https://www.flickr.com/photos/jkomusin/32339115107/Show Image(https://farm8.staticflickr.com/7891/47302097012_929e00895b_k.jpg)
thats a whale and i don't think MP will look like this at all
MP >> whale
fact
Mystery boards >> boards that exist, totally agree :p
If it looks **** I'll eat my humble pie but I'll keep talking about it.FTFY
Similar to our MP
Photo credit: https://www.flickr.com/photos/jkomusin/32339115107/Show Image(https://farm8.staticflickr.com/7891/47302097012_929e00895b_k.jpg)
thats a whale and i don't think MP will look like this at all
MP >> whale
fact
Similar to our MP
Photo credit: https://www.flickr.com/photos/jkomusin/32339115107/Show Image(https://farm8.staticflickr.com/7891/47302097012_929e00895b_k.jpg)
thats a whale and i don't think MP will look like this at all
MP >> whale
fact
What is FACT?
Similar to our MP
Photo credit: https://www.flickr.com/photos/jkomusin/32339115107/Show Image(https://farm8.staticflickr.com/7891/47302097012_929e00895b_k.jpg)
thats a whale and i don't think MP will look like this at all
MP >> whale
fact
What is FACT?
fact = true statement
in other words, we believe in you and know that MP will be awesome haha.
so when do we get to see it? :)
Similar to our MP
Photo credit: https://www.flickr.com/photos/jkomusin/32339115107/Show Image(https://farm8.staticflickr.com/7891/47302097012_929e00895b_k.jpg)
thats a whale and i don't think MP will look like this at all
MP >> whale
fact
What is FACT?
fact = true statement
in other words, we believe in you and know that MP will be awesome haha.
so when do we get to see it? :)
this is true
im not in this buy but i am excited to see what the final product looks like
Similar to our MP
Photo credit: https://www.flickr.com/photos/jkomusin/32339115107/Show Image(https://farm8.staticflickr.com/7891/47302097012_929e00895b_k.jpg)
thats a whale and i don't think MP will look like this at all
MP >> whale
fact
What is FACT?
fact = true statement
in other words, we believe in you and know that MP will be awesome haha.
so when do we get to see it? :)
this is true
im not in this buy but i am excited to see what the final product looks like
Are you referring to the whale's side design?
MP side design copied the whale?
Similar to our MP
Photo credit: https://www.flickr.com/photos/jkomusin/32339115107/Show Image(https://farm8.staticflickr.com/7891/47302097012_929e00895b_k.jpg)
thats a whale and i don't think MP will look like this at all
MP >> whale
fact
What is FACT?
fact = true statement
in other words, we believe in you and know that MP will be awesome haha.
so when do we get to see it? :)
this is true
im not in this buy but i am excited to see what the final product looks like
Are you referring to the whale's side design?
MP side design copied the whale?
No, > means greater (like 2 > 1). They are just saying that MP is better than Whale
https://lzlife.tistory.com/414
HYPE
https://lzlife.tistory.com/414
HYPE
ne password avail
*******
I have the password :p
Proof for later: There are 3 loose screws in the picture.
For those of you who joined, LZ posted password in order list.
For those of you who joined, LZ posted password in order list.
Similar to our MP
Photo credit: https://www.flickr.com/photos/jkomusin/32339115107/Show Image(https://farm8.staticflickr.com/7891/47302097012_929e00895b_k.jpg)
thats a whale and i don't think MP will look like this at all
Similar to our MP
Photo credit: https://www.flickr.com/photos/jkomusin/32339115107/Show Image(https://farm8.staticflickr.com/7891/47302097012_929e00895b_k.jpg)
thats a whale and i don't think MP will look like this at all
from the teaser they look p darn similar (just side profile only). the weight detail on the MP looks very dank
Similar to our MP
Photo credit: https://www.flickr.com/photos/jkomusin/32339115107/Show Image(https://farm8.staticflickr.com/7891/47302097012_929e00895b_k.jpg)
thats a whale and i don't think MP will look like this at all
from the teaser they look p darn similar (just side profile only). the weight detail on the MP looks very dank
Funnily enough it's closer to Mech27-v2 than Whale :))
Similar to our MP
Photo credit: https://www.flickr.com/photos/jkomusin/32339115107/Show Image(https://farm8.staticflickr.com/7891/47302097012_929e00895b_k.jpg)
thats a whale and i don't think MP will look like this at all
from the teaser they look p darn similar (just side profile only). the weight detail on the MP looks very dank
Funnily enough it's closer to Mech27-v2 than Whale :))
its almost as if after all these years there are only so many ways to do a rectangle
Similar to our MP
Photo credit: https://www.flickr.com/photos/jkomusin/32339115107/Show Image(https://farm8.staticflickr.com/7891/47302097012_929e00895b_k.jpg)
thats a whale and i don't think MP will look like this at all
from the teaser they look p darn similar (just side profile only). the weight detail on the MP looks very dank
Funnily enough it's closer to Mech27-v2 than Whale :))
its almost as if after all these years there are only so many ways to do a rectangleShow Image(https://media.giphy.com/media/xT0xeJpnrWC4XWblEk/giphy.gif)
Similar to our MP
Photo credit: https://www.flickr.com/photos/jkomusin/32339115107/Show Image(https://farm8.staticflickr.com/7891/47302097012_929e00895b_k.jpg)
thats a whale and i don't think MP will look like this at all
from the teaser they look p darn similar (just side profile only). the weight detail on the MP looks very dank
Funnily enough it's closer to Mech27-v2 than Whale :))
its almost as if after all these years there are only so many ways to do a rectangle
The spec sheet said 3*Brass weight, and the teaser had 1 only.
Would be interesting to see how LZ did the weight design especially with the name plate being quite large
99% teaser indeedThe spec sheet said 3*Brass weight, and the teaser had 1 only.
Would be interesting to see how LZ did the weight design especially with the name plate being quite large
I was also curious about this, I guess we’ll see when they deliver or he teases us again. It would seem that the remaining 2 have to be on the bottom but I could be completely wrong.
I'm pretty sure I want the Dell 87 layout but I'm trying to figure out what Dell 84 is.
Order : Alps Switch plate n PCB
Switch plate = STS 1.2t only
PCB = https://hineybush.com/collections/pcbs/products/h87alps
2 Type order.
Order for LZ MP (Shipping with MP)
Order for CLS, GHv2 compatible (Individual delivery) Korea airmail (EMS fast shipping adds $ 16)
Order Here (~4/12.2019)
https://forms.gle/NQDeoRQpZ7puAdKs6
Order : Alps Switch plate n PCB
Switch plate = STS 1.2t only
PCB = https://hineybush.com/collections/pcbs/products/h87alps
2 Type order.
Order for LZ MP (Shipping with MP)
Order for CLS, GHv2 compatible (Individual delivery) Korea airmail (EMS fast shipping adds $ 16)
Order Here (~4/12.2019)
https://forms.gle/NQDeoRQpZ7puAdKs6
I've been wanting to build an alps CLS, thanks LZ!
Now to source some good alps switches and caps... Any suggestions?
Order : Alps Switch plate n PCB
Switch plate = STS 1.2t only
PCB = https://hineybush.com/collections/pcbs/products/h87alps
2 Type order.
Order for LZ MP (Shipping with MP)
Order for CLS, GHv2 compatible (Individual delivery) Korea airmail (EMS fast shipping adds $ 16)
Order Here (~4/12.2019)
https://forms.gle/NQDeoRQpZ7puAdKs6
I've been wanting to build an alps CLS, thanks LZ!
Now to source some good alps switches and caps... Any suggestions?
Alps throwback is a nice keycap set but it needs MX style stabilizers: https://www.deskcandy.xyz/shop/alps-throwback-keycap-set-k748c?category=Alps-compatible
Is it just me, or is $179 really damn expensive for a 60% set of pbt keycaps, and I still need the tkl and arrows sets to go with it..
Now to source some good alps switches and caps... Any suggestions?
Full case design will be released before the end of April.
Full case design will be released before the end of April.Where was this info posted?
Emailed him bc I was getting impatient like you
Emailed him bc I was getting impatient like you
The schedule was delayed due to various personal problems.I have faith in you, LZ.
The final sample will be released this week.
And next week i will get the products from the anodizing factory.
I also have 24k gold plated to solve the brass discoloration problem.
The additional cost is significant, but I'm going to finish with a little more care as I'm late. :thumb:
Please have a moment and wait.
The delivery plan will be completed in May.
Mr LZ, whats the password? :(
Mr LZ, whats the password? :(
someone said above it's somewhere on the sheet
Design fully released. Check the spreadsheet for those who bought the board and load in the password in http://lzlife.tistory.com !!!!!!!!!!!!!!!!!!!!!!
I also have 24k gold plated to solve the brass discoloration problem.Thanks for this, LZ. Really nice. The gold solution is fantastic. :thumb: :thumb:
The additional cost is significant, but I'm going to finish with a little more care as I'm late. :thumb:
How can I see the design?
Sent from my iPhone using Tapatalk
How can I see the design?
Sent from my iPhone using Tapatalk
Password is in the Google sheet.
i have the pictures but i don't know if LZ would be OK with me posting themWeird flex, but ok
Wow. Dat red & gold is crazy. :cool: I'm going to be typing on a Ferrari. :cool:Got red and gold too, no regrets looks wonderful
Don't post. LZ wouldn't have had a password that was only obtained through a spreadsheet that you get access after purchasing the board. Atleast imo
The red and gold is so ironman ish
Hey Mr LZ, any chance of damascus weight replacement instead of the brass?
I would have loved if the parts hadn't been plated and instead were sand blasted and clear-coated - the shiny look of the brass seems like a bit much at first glance.
I would have loved if the parts hadn't been plated and instead were sand blasted and clear-coated - the shiny look of the brass seems like a bit much at first glance.
Sure it's bold but it's called MP for a reason, i don't get why so many people want the same ol boring colors over and over again.
Sent from my LYA-L29 using Tapatalk
Sure it's bold but it's called MP for a reason, i don't get why so many people want the same ol boring colors over and over again.
Sent from my LYA-L29 using Tapatalk
Sandblasted brass = the most standard and boring keyboard weight "color"Sure it's bold but it's called MP for a reason, i don't get why so many people want the same ol boring colors over and over again.
Sent from my LYA-L29 using Tapatalk
Who wants boring colors again?
(Attachment Link)
I got it today. The best ever!
You will realize that this keeb can become your end game when you get this MP.
(Attachment Link)Hu? Is it shipped already? Did u get a tracking id?
I got it today. The best ever!
You will realize that this keeb can become your end game when you get this MP.
(Attachment Link)
I got it today. The best ever!
You will realize that this keeb can become your end game when you get this MP.
(Attachment Link)
I got it today. The best ever!
You will realize that this keeb can become your end game when you get this MP.
(Attachment Link)
I got it today. The best ever!
You will realize that this keeb can become your end game when you get this MP.
Can you please take more photos? I've been excited to see the full board for a while now as it's LZ and him(her?/they?) being super secretive about the design has definitely hyped me up :D
(Attachment Link)
I got it today. The best ever!
You will realize that this keeb can become your end game when you get this MP.
Can you please take more photos? I've been excited to see the full board for a while now as it's LZ and him(her?/they?) being super secretive about the design has definitely hyped me up :D
http://www.coolenjoy.net/bbs/34/2237712
I'm soliciting opinions on which switches to use with the PC half-plates.
Would it work with Healios or should I get some Zilents?
I'm soliciting opinions on which switches to use with the PC half-plates.
Would it work with Healios or should I get some Zilents?
I enjoy both linears or tactiles on PC half. Personally, I'd try the Healios.
I got mine today. I'm super happy with the finished product.
Some potatoes to fill the void till someone with a decent camera gets hold of one...
Some potatoes to fill the void till someone with a decent camera gets hold of one...
Built with a h87a, a PC half plate and 62g Sakurios.
It's here!
It was supposed to arrive yesterday, but I wasn't home, so I had to go pick up the mail from the post office today.
Go through the photos below so you can experience my unboxing experience vicariously.
What's this? The LZ/TX bag fits inside of the box perfectly.Show Image(https://i.imgur.com/tzWPiQr.jpg)MoreAs I open the bag..., I find the PCB and a brass plate...Show Image(https://i.imgur.com/2KpIijT.jpg)MoreBOOM! The grey top and bottom match perfectly -- the anodizing is smooth and there are no blemishes as far as I can tell from my cursory inspection.Show Image(https://i.imgur.com/mtUIpdo.jpg)MoreGold-plated side brass weights :eek:Show Image(https://i.imgur.com/czjfBov.jpg)MoreRear view :cool:Show Image(https://i.imgur.com/1HwMNpM.jpg)MoreThe port has a taper that seems to fit the USB port piece snugly.Show Image(https://i.imgur.com/sCBEniU.jpg)MoreThe bottom ;)Show Image(https://i.imgur.com/gKMnCSg.jpg)MoreAll the pieces laid out...Show Image(https://i.imgur.com/VTxuHxe.jpg)MoreAnd now, I remove the brass sides...Show Image(https://i.imgur.com/E2ZS9tf.jpg)
MoreSurprise at the bottom of the top piece! Note that there are no marks whatsoever around the screw holes. It's impeccable.Show Image(https://i.imgur.com/li8VPe5.jpg)MoreThe top and bottom piece do not have alignment tabs; the edges of each piece are sharp, and the seams are very nice.
I actually like the sides without the weights...Show Image(https://i.imgur.com/TlJc0Ak.jpg)MoreClassy sides... The screw holes for the side pieces are countersunk flush on the top surface of the bottom piece, so the holes are completely unnoticeable! Awesome.Show Image(https://i.imgur.com/Ogsd7ok.jpg)
I hope you enjoyed the photos!
With the exception of a missing half-plate (I PM'd you, LifeZone), everything looks good.
I will post more (probably on the Post Your Korean Keyboard! thread) when the build is ready and complete.
It's here!
It was supposed to arrive yesterday, but I wasn't home, so I had to go pick up the mail from the post office today.
Go through the photos below so you can experience my unboxing experience vicariously.
What's this? The LZ/TX bag fits inside of the box perfectly.Show Image(https://i.imgur.com/tzWPiQr.jpg)MoreAs I open the bag..., I find the PCB and a brass plate...Show Image(https://i.imgur.com/2KpIijT.jpg)MoreBOOM! The grey top and bottom match perfectly -- the anodizing is smooth and there are no blemishes as far as I can tell from my cursory inspection.Show Image(https://i.imgur.com/mtUIpdo.jpg)MoreGold-plated side brass weights :eek:Show Image(https://i.imgur.com/czjfBov.jpg)MoreRear view :cool:Show Image(https://i.imgur.com/1HwMNpM.jpg)MoreThe port has a taper that seems to fit the USB port piece snugly.Show Image(https://i.imgur.com/sCBEniU.jpg)MoreThe bottom ;)Show Image(https://i.imgur.com/gKMnCSg.jpg)MoreAll the pieces laid out...Show Image(https://i.imgur.com/VTxuHxe.jpg)MoreAnd now, I remove the brass sides...Show Image(https://i.imgur.com/E2ZS9tf.jpg)
MoreSurprise at the bottom of the top piece! Note that there are no marks whatsoever around the screw holes. It's impeccable.Show Image(https://i.imgur.com/li8VPe5.jpg)MoreThe top and bottom piece do not have alignment tabs; the edges of each piece are sharp, and the seams are very nice.
I actually like the sides without the weights...Show Image(https://i.imgur.com/TlJc0Ak.jpg)MoreClassy sides... The screw holes for the side pieces are countersunk flush on the top surface of the bottom piece, so the holes are completely unnoticeable! Awesome.Show Image(https://i.imgur.com/Ogsd7ok.jpg)
I hope you enjoyed the photos!
With the exception of a missing half-plate (I PM'd you, LifeZone), everything looks good.
I will post more (probably on the Post Your Korean Keyboard! thread) when the build is ready and complete.
I do enjoy your photos! The silver looks great. But I also love my black one too. :thumb:
It's here!
It was supposed to arrive yesterday, but I wasn't home, so I had to go pick up the mail from the post office today.
Go through the photos below so you can experience my unboxing experience vicariously.
What's this? The LZ/TX bag fits inside of the box perfectly.Show Image(https://i.imgur.com/tzWPiQr.jpg)MoreAs I open the bag..., I find the PCB and a brass plate...Show Image(https://i.imgur.com/2KpIijT.jpg)MoreBOOM! The grey top and bottom match perfectly -- the anodizing is smooth and there are no blemishes as far as I can tell from my cursory inspection.Show Image(https://i.imgur.com/mtUIpdo.jpg)MoreGold-plated side brass weights :eek:Show Image(https://i.imgur.com/czjfBov.jpg)MoreRear view :cool:Show Image(https://i.imgur.com/1HwMNpM.jpg)MoreThe port has a taper that seems to fit the USB port piece snugly.Show Image(https://i.imgur.com/sCBEniU.jpg)MoreThe bottom ;)Show Image(https://i.imgur.com/gKMnCSg.jpg)MoreAll the pieces laid out...Show Image(https://i.imgur.com/VTxuHxe.jpg)MoreAnd now, I remove the brass sides...Show Image(https://i.imgur.com/E2ZS9tf.jpg)
MoreSurprise at the bottom of the top piece! Note that there are no marks whatsoever around the screw holes. It's impeccable.Show Image(https://i.imgur.com/li8VPe5.jpg)MoreThe top and bottom piece do not have alignment tabs; the edges of each piece are sharp, and the seams are very nice.
I actually like the sides without the weights...Show Image(https://i.imgur.com/TlJc0Ak.jpg)MoreClassy sides... The screw holes for the side pieces are countersunk flush on the top surface of the bottom piece, so the holes are completely unnoticeable! Awesome.Show Image(https://i.imgur.com/Ogsd7ok.jpg)
I hope you enjoyed the photos!
With the exception of a missing half-plate (I PM'd you, LifeZone), everything looks good.
I will post more (probably on the Post Your Korean Keyboard! thread) when the build is ready and complete.
It's here!
It was supposed to arrive yesterday, but I wasn't home, so I had to go pick up the mail from the post office today.
Go through the photos below so you can experience my unboxing experience vicariously.
What's this? The LZ/TX bag fits inside of the box perfectly.Show Image(https://i.imgur.com/tzWPiQr.jpg)MoreAs I open the bag..., I find the PCB and a brass plate...Show Image(https://i.imgur.com/2KpIijT.jpg)MoreBOOM! The grey top and bottom match perfectly -- the anodizing is smooth and there are no blemishes as far as I can tell from my cursory inspection.Show Image(https://i.imgur.com/mtUIpdo.jpg)MoreGold-plated side brass weights :eek:Show Image(https://i.imgur.com/czjfBov.jpg)MoreRear view :cool:Show Image(https://i.imgur.com/1HwMNpM.jpg)MoreThe port has a taper that seems to fit the USB port piece snugly.Show Image(https://i.imgur.com/sCBEniU.jpg)MoreThe bottom ;)Show Image(https://i.imgur.com/gKMnCSg.jpg)MoreAll the pieces laid out...Show Image(https://i.imgur.com/VTxuHxe.jpg)MoreAnd now, I remove the brass sides...Show Image(https://i.imgur.com/E2ZS9tf.jpg)
MoreSurprise at the bottom of the top piece! Note that there are no marks whatsoever around the screw holes. It's impeccable.Show Image(https://i.imgur.com/li8VPe5.jpg)MoreThe top and bottom piece do not have alignment tabs; the edges of each piece are sharp, and the seams are very nice.
I actually like the sides without the weights...Show Image(https://i.imgur.com/TlJc0Ak.jpg)MoreClassy sides... The screw holes for the side pieces are countersunk flush on the top surface of the bottom piece, so the holes are completely unnoticeable! Awesome.Show Image(https://i.imgur.com/Ogsd7ok.jpg)
I hope you enjoyed the photos!
With the exception of a missing half-plate (I PM'd you, LifeZone), everything looks good.
I will post more (probably on the Post Your Korean Keyboard! thread) when the build is ready and complete.
(Attachment Link)
(Attachment Link)
My LZ MP has been built, and am satisfied with MP 200%.
For those who got shipping notifications, how did you receive them? Via email from PayPal? I haven't gotten anything yet...
For those who got shipping notifications, how did you receive them? Via email from PayPal? I haven't gotten anything yet...
Paypal.
Did you order an ALPS PCB/Plate?
Mine i got via PayPal too. Did u check ur PayPal account if it's added?
Sent from my LYA-L29 using Tapatalk
(Attachment Link)
(Attachment Link)
My LZ MP has been built, and am satisfied with MP 200%.
Mine i got via PayPal too. Did u check ur PayPal account if it's added?
Sent from my LYA-L29 using Tapatalk
Yes I checked. No paypal updates since I paid the invoice last year.
Mine i got via PayPal too. Did u check ur PayPal account if it's added?
Sent from my LYA-L29 using Tapatalk
Yes I checked. No paypal updates since I paid the invoice last year.
Email LZ on the email in the PP invoice (the @naver one).
For me, I didn’t get any notifications either on PayPal or email. But the document from my local postal office just showed up on my door to pay for the tax. And that’s how I knew my MP arrived.
For me, I didn’t get any notifications either on PayPal or email. But the document from my local postal office just showed up on my door to pay for the tax. And that’s how I knew my MP arrived.
Hmmm, that would be quite bad in my case, since I've changed addresses and planned to connect with the shipping service when I received a tracking number = )
For me, I didn’t get any notifications either on PayPal or email. But the document from my local postal office just showed up on my door to pay for the tax. And that’s how I knew my MP arrived.
Hmmm, that would be quite bad in my case, since I've changed addresses and planned to connect with the shipping service when I received a tracking number = )
Brave...
USPS does the local bit. Did you sign up for informed delivery and submit an address change via usps.com when you moved? I moved last month and also stay in the bay area. In my case I just got USPS to put a hold on the package and collected it from the post office.
For me, I didn’t get any notifications either on PayPal or email. But the document from my local postal office just showed up on my door to pay for the tax. And that’s how I knew my MP arrived.
Hmmm, that would be quite bad in my case, since I've changed addresses and planned to connect with the shipping service when I received a tracking number = )
Sent you a PM with an alternative contact email.
Brave...
USPS does the local bit. Did you sign up for informed delivery and submit an address change via usps.com when you moved? I moved last month and also stay in the bay area. In my case I just got USPS to put a hold on the package and collected it from the post office.
Eh, it's slightly more complicated than that. It's my old man's winter home. So yeah IDK. I feel like I need a tracking number or something so I can call USPS. LZ, if you're reading this, I sent you two emails--please reply.
Silver LZ MP received! Planning to built it soon
some pic comparing LZ CLS vs LZ MP
After having spent the last seven weeks in the incompetent hands of my local postal service, my MP was delivered today.
Very relieved to find it in perfect shape after all this time - the LZ bags are wonderful.
While you've seen enough pics of it already and have probably formed your own opinion on it, I can tell you that it is stunning. Truly a masterpiece.
Hello everyone.
In the meantime, one of my family was sick and spent a lot of time in the hospital.
So the remaining delivery is delayed.
I received the Alps PCB last week.
I am going to finish the delivery with Alps order and several orders.
I booked the last shipment this week.
Shipping information will be updated to your PAYPAL account.
I apologize for the delay. There were a few issues
I will complete the LZ MP GB without any problems.
After all shipment is completed, the remaining quantity will be sold.
And a little extra cost is added.
The MP is made in limited quantities and there is no additional production.
I have produced 50, including extra quantities.
45 of them have numbers.
The remaining five are not numbered. (Eng s, Class A or B)
The schedule for the sale has not yet been set, but it is expected in early August.
Please, Do not contact us personally regarding sales inquiries.
Hello everyone.
In the meantime, one of my family was sick and spent a lot of time in the hospital.
So the remaining delivery is delayed.
I received the Alps PCB last week.
I am going to finish the delivery with Alps order and several orders.
I booked the last shipment this week.
Shipping information will be updated to your PAYPAL account.
I apologize for the delay. There were a few issues
I will complete the LZ MP GB without any problems.
After all shipment is completed, the remaining quantity will be sold.
And a little extra cost is added.
The MP is made in limited quantities and there is no additional production.
I have produced 50, including extra quantities.
45 of them have numbers.
The remaining five are not numbered. (Eng s, Class A or B)
The schedule for the sale has not yet been set, but it is expected in early August.
Please, Do not contact us personally regarding sales inquiries.
I built mine last night, both PCBs that came with it where broken.. :P The board itself is by far the nicest board I have though! ;)
One had a massive short, beyond my capability to fix, the other I am not able to program, space on pcb does not do anything, lspace and rspace shows up as space in switch hitter, but again, beyond my capability to fix when the pcb wont let me flash it, and the insert/home/del cluster is also not working.
I had a extra pcb from my lz gh v2 that I use for my lz mp now..
One had a massive short, beyond my capability to fix, the other I am not able to program, space on pcb does not do anything, lspace and rspace shows up as space in switch hitter, but again, beyond my capability to fix when the pcb wont let me flash it, and the insert/home/del cluster is also not working.
I had a extra pcb from my lz gh v2 that I use for my lz mp now..
The default mapping on spacebar is fn key. That's why it doesn't do anything when you hit spacebar. This got me headache too at the beginning. Just need to remap it using Jigon firmware.
One had a massive short, beyond my capability to fix, the other I am not able to program, space on pcb does not do anything, lspace and rspace shows up as space in switch hitter, but again, beyond my capability to fix when the pcb wont let me flash it, and the insert/home/del cluster is also not working.
I had a extra pcb from my lz gh v2 that I use for my lz mp now..
The default mapping on spacebar is fn key. That's why it doesn't do anything when you hit spacebar. This got me headache too at the beginning. Just need to remap it using Jigon firmware.
Hey,
Yes this is what google thought me to, but I am not able to flash the PCB using Jigon, Jigon works for the other PCB I had from my lz gh v2 though, so, yeah.. both the pcbs that came with the lz mp is useless to me, atleast. I am planning on shipping them to a friend in the US so he can have a look/play around with them.
One had a massive short, beyond my capability to fix, the other I am not able to program, space on pcb does not do anything, lspace and rspace shows up as space in switch hitter, but again, beyond my capability to fix when the pcb wont let me flash it, and the insert/home/del cluster is also not working.
I had a extra pcb from my lz gh v2 that I use for my lz mp now..
The default mapping on spacebar is fn key. That's why it doesn't do anything when you hit spacebar. This got me headache too at the beginning. Just need to remap it using Jigon firmware.
Hey,
Yes this is what google thought me to, but I am not able to flash the PCB using Jigon, Jigon works for the other PCB I had from my lz gh v2 though, so, yeah.. both the pcbs that came with the lz mp is useless to me, atleast. I am planning on shipping them to a friend in the US so he can have a look/play around with them.
Hello everyone.
In the meantime, one of my family was sick and spent a lot of time in the hospital.
So the remaining delivery is delayed.
I received the Alps PCB last week.
I am going to finish the delivery with Alps order and several orders.
I booked the last shipment this week.
Shipping information will be updated to your PAYPAL account.
I apologize for the delay. There were a few issues
I will complete the LZ MP GB without any problems.
After all shipment is completed, the remaining quantity will be sold.
And a little extra cost is added.
The MP is made in limited quantities and there is no additional production.
I have produced 50, including extra quantities.
45 of them have numbers.
The remaining five are not numbered. (Eng s, Class A or B)
The schedule for the sale has not yet been set, but it is expected in early August.
Please, Do not contact us personally regarding sales inquiries.
I got my new camera, playing around with my LZ MP
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
I just got mine today (from the extras sale). Has anyone experienced the same issue? I can't insert my plate since the tolerances are off. I think the thick coating on that part of the plate messed up the clearance.
What there are extras for the MP? :((Already sold, ripepperoni
I had this issue too. Just email LZ. He'll send you a new plate, and you also have to send this one back. Mine works now :thumb:
Sorry just wanted to revive because this is my dream board - Is there any any chance of a round 2? ;D
Ah really a bummer :/ thanks for the clarification! Just really love this board and is impossible to find in the wildSorry just wanted to revive because this is my dream board - Is there any any chance of a round 2? ;D
I'm pretty sure LZ has never re-run a board, unless you count the LZ-GH v2 as a re-run. I wouldn't even count that, though, since he asked the geekhack community what they wanted and people said they wanted the same thing as before. So sadly, I wouldn't count on it.
Ah really a bummer :/ thanks for the clarification! Just really love this board and is impossible to find in the wildSorry just wanted to revive because this is my dream board - Is there any any chance of a round 2? ;D
I'm pretty sure LZ has never re-run a board, unless you count the LZ-GH v2 as a re-run. I wouldn't even count that, though, since he asked the geekhack community what they wanted and people said they wanted the same thing as before. So sadly, I wouldn't count on it.
Sent from my iPhone using Tapatalk