Here we go guys. your lunar new year isn't going to be better without some RED, so I figured this is a good time to post this. :p
[url=https://geekhack.org/index.php?topic=94105.0][img width=480 height=120]https://i.imgur.com/6HtIDqJ.jpg[/img][/url]
neato
im in
Glad to see this game a comeback. I'm in
I need this in my life
Personally, I like icon+text mods, but if I had to choose between either text-only or icon-only, I'd pick text-only.I agree with you as well, text adds more life to this keyset.
Yes please. I'm seeing a lack of upside-down crosses. Maybe that could be a novelty / shift icon mod?
Maybe a set of teeth or horns for novelties?
More ideas for novelties:
-demonic looking sword/ceremonial knife
-drop of blood
-pentagram
-skull w/crossbones
Take all of my moneyyyyy
Suggested novelties:
* Town portal
* Potions
* Gemstones?
Sweet. The red used in your image looks rather desaturated in comparison to DCS Sanctuary, though. Can we get some idea of the actual colours the set will end up with?yeah, we're changing the red a little bit as we want the set to match the whole diablo universe, and we think our red are more representing the whole universe.
Also, a mono-legend version of the alternate numrow, with just the Roman numerals, would be neat. And moar novelties.
yay :thumb:
about the mods, I actually don't mind either, though based on the pic on OP: the Home, End, Insert, Delete, Page Up, Page Down keys don't look very good to me (the font size is too small compare to other keys)
maybe we should shorten them to Home, End, Ins, Del, PgUp, PgDn
or use icon mods ? :-\
also, could you consider adding split-spacebar support? 2.75u, 2.25u, 1.75u blank keys. :p
---
Happy Lunar New Year!
I'll see what i can do :DShow Image(https://i.imgur.com/JdoJCYx.png)
Severed Ear novelty?
I'm fully committed to buying a set. I don't have any good ideas about expansion sets because I keep to standard layouts. As for mods, I vote for text mods over symbols.
For novelties, there's a lot of possibilities. I'll personally try my hand at mocking up some vectorized symbols for the set when I get the time. And as far as as crosses go, they aren't ever really featured in the Diablo universe. The story may be about demons from the Burning Hells and angels from the High Heavens fighting for control of Sanctuary and the Nephalem holding the balance, but despite having "heaven" and "hell" the game tries to not actually associate visibly with Christianity. No crucifixes, no Jesus, no God. It's a more mystical and fantastical take on the themes of angels and devils.
I'm 100% in for this, especially in Cherry profile thick dye-subbed PBT! Don't get me wrong, I love me some thick double shot ABS but those sets need to be babied in order to stay decent looking for a long time, thick dye-subed PBT on the other hand can literally get dragged through hell & still look brand new on the other side, LOL! Not to mention the pricing difference between the two & no Exocet legends with GMK or JTK. I think it would be awesome to have a very customized set like this that i don't have to worry about how much usage I'm putting on it.
As far as compatibility goes I'd personally like to see an extra 2.25u shift for 660M, 1.75u shift, 1u R1 Fn, 1u R1 Alt, 1u R1 Ctrl, R3 Page Up, & a R2 Page Down for 68 key layouts. For style a extra red Esc, Enter, & arrow cluster would be nice. I already see a bunch of great ideals for the novelties in this thread, the only things I would have to add for that is one of the novelties really should be of this,
(Attachment Link)
drawing of Diablo. Obviously it would have to be simplified but I think a simplified version of that in black on a red key would look amazing. Also maybe work in a simplified version of this,
(Attachment Link)
drawing of Malthael just have something from D3 in the set.
With such a low MOQ, seemingly high interest, & great pricing I think this set will do great! :thumb:
i'll consider the novelties.
As far as compatibility goes I'd personally like to see an extra 2.25u shift for 660M, 1.75u shift, 1u R1 Fn, 1u R1 Alt, 1u R1 Ctrl, R3 Page Up, & a R2 Page Down for 68 key layouts. For style a extra red Esc, Enter, & arrow cluster would be nice. I already see a bunch of great ideals for the novelties in this thread, the only things I would have to add for that is one of the novelties really should be of this.
Split space? Under $100? Yes please!i'll try to keep it... i'm trying here :p
Dymloslouire, do you have a rough ETA for the GB? /dev/tty is up on MD right now and I'm really tempted... if this doesn't launch soon enough I won't be able to hold myself back :'( :'(
Dymloslouire, do you have a rough ETA for the GB? /dev/tty is up on MD right now and I'm really tempted... if this doesn't launch soon enough I won't be able to hold myself back :'( :'(
Do what I'm doing and buy both! lol
Dymloslouire, do you have a rough ETA for the GB? /dev/tty is up on MD right now and I'm really tempted... if this doesn't launch soon enough I won't be able to hold myself back :'( :'(
Dymloslouire, do you have a rough ETA for the GB? /dev/tty is up on MD right now and I'm really tempted... if this doesn't launch soon enough I won't be able to hold myself back :'( :'(
I'm still working with my friend and vendor about the set lol. my guess is around summer, so if you want to go tty, go ahead. :p
I'm still working with my friend and vendor about the set lol. my guess is around summer, so if you want to go tty, go ahead. :p
I'm still working with my friend and vendor about the set lol. my guess is around summer, so if you want to go tty, go ahead. :p
Good on you for that - bunch of cool sets for now, a Summer release will do you best in my opinion. With Space Cadet, Skidata+ R2 and Terminal R2 in the air you just gotta make sure you try and dodge those as best you can, we're golden!
I'm still working with my friend and vendor about the set lol. my guess is around summer, so if you want to go tty, go ahead. :p
Good on you for that - bunch of cool sets for now, a Summer release will do you best in my opinion. With Space Cadet, Skidata+ R2 and Terminal R2 in the air you just gotta make sure you try and dodge those as best you can, we're golden!
Skidata and Terminal are getting R2's? my poor wallet!!!
I'm still working with my friend and vendor about the set lol. my guess is around summer, so if you want to go tty, go ahead. :p
Good on you for that - bunch of cool sets for now, a Summer release will do you best in my opinion. With Space Cadet, Skidata+ R2 and Terminal R2 in the air you just gotta make sure you try and dodge those as best you can, we're golden!
I think your on the right track and slow is the way to go!!! just remember to update every once and a while keep the hype going.. I have seen some pretty amazing keysets not do so hot cause the creator refused to give updates.. are to even hype the product!! I am also jumping on Terminal and skidata... I am like you I am luke warm to cadet I am sure others will like it thought..+1
I think your on the right track and slow is the way to go!!! just remember to update every once and a while keep the hype going.. I have seen some pretty amazing keysets not do so hot cause the creator refused to give updates.. are to even hype the product!! I am also jumping on Terminal and skidata... I am like you I am luke warm to cadet I am sure others will like it thought..
so the vendor are confirmed. i hope you all are happy with this :))
now let's just hope that the price of the set are okay enough...
so the vendor are confirmed. i hope you all are happy with this :))
now let's just hope that the price of the set are okay enough...
That's great to hear! I hope things go smoothly, and I'll be waiting patiently for the summer launch :D
I showed my fiance the set and his main comment was that the red needed to be much brighter. He's more of a Diablo fanboy than I am so i'll take his word for it!
I showed my fiance the set and his main comment was that the red needed to be much brighter. He's more of a Diablo fanboy than I am so i'll take his word for it!
Hiya!
Don't worry, the red will be brighter than this. But it will be slightly different from OG red.
i would like 2 see a number pad set with it as well just like the 1 on the massdrop verwe'll see :))
Is this going to be red on black or red on dark grey more like the original? I'd prefer it to be black and red but I understand that is harder technically and probably not as true to the original DCS set.the target is charcoal-ish. it's a very-very dark grey. but not pitch black.
Will there be number row options with only exocet typeface? Possible enough novelties to cover alpha's which are symbolsas for now. there's no plan for it. but with enough vote, we can add it to the list and then it's up to MOQ.
Looking forward to this. good job
Please do so. Where does one vote?Will there be number row options with only exocet typeface? Possible enough novelties to cover alpha's which are symbolsas for now. there's no plan for it. but with enough vote, we can add it to the list and then it's up to MOQ.Looking forward to this. good job
thanks!
Please do so. Where does one vote?Will there be number row options with only exocet typeface? Possible enough novelties to cover alpha's which are symbolsas for now. there's no plan for it. but with enough vote, we can add it to the list and then it's up to MOQ.Looking forward to this. good job
thanks!
I am picking my next custom specifically to look nice with this set
I am picking my next custom specifically to look nice with this set
go with black case, orange/dark yellow switch LED and red underglow. red case can also make it :p
Alright, I've spent the morning sketching up some vectors for possible novelties in illustrator and here's what I've managed to come up with.Show Image(https://i.imgur.com/DjM2svL.png)
The Lone Wanderer, taken from the Diablo 2 box art (https://upload.wikimedia.org/wikipedia/en/thumb/d/d5/Diablo_II_Coverart.png/220px-Diablo_II_Coverart.png).Show Image(https://i.imgur.com/lsENzf5.png)
Diablo's face, taken from this Diablo 3 art (https://www.videogamesartwork.com/sites/default/files/images/image/1377178723/diablo3-cover-01.jpg).Show Image(https://i.imgur.com/MXQZIIa.png)
A town portal, taken from the Diablo 2 sprite (https://diablo2.diablowiki.net/images/7/77/Portal-blue1.gif).Show Image(https://i.imgur.com/Ihw3wuG.png)
Alternatively, the town portal spell icon, taken from the Diablo 1 icon (https://vignette.wikia.nocookie.net/diablo/images/c/cd/Town-portal-sp.gif/revision/latest?cb=20090203144248)Show Image(https://i.imgur.com/I7fXXbg.png)Show Image(https://i.imgur.com/mcTQo8A.png)
An angel holding the health orb and a demon holding the mana orb, from the Diablo 2 interface (https://vignette.wikia.nocookie.net/diablo/images/c/ce/Smite01.jpg/revision/latest?cb=20151130155954)Show Image(https://i.imgur.com/gZFAaPA.png)Show Image(https://i.imgur.com/9eRiz7h.png)
A health and mana potion based on the Diablo 3 health potion (https://www.diablowiki.net/images/thumb/a/a4/Health-potion-tooltip-ros.JPG/300px-Health-potion-tooltip-ros.JPG)
I can provide SVG format files of any of these :)
Alright, I've spent the morning sketching up some vectors for possible novelties in illustrator and here's what I've managed to come up with.Show Image(https://i.imgur.com/DjM2svL.png)
The Lone Wanderer, taken from the Diablo 2 box art (https://upload.wikimedia.org/wikipedia/en/thumb/d/d5/Diablo_II_Coverart.png/220px-Diablo_II_Coverart.png).Show Image(https://i.imgur.com/lsENzf5.png)
Diablo's face, taken from this Diablo 3 art (https://www.videogamesartwork.com/sites/default/files/images/image/1377178723/diablo3-cover-01.jpg).Show Image(https://i.imgur.com/MXQZIIa.png)
A town portal, taken from the Diablo 2 sprite (https://diablo2.diablowiki.net/images/7/77/Portal-blue1.gif).Show Image(https://i.imgur.com/Ihw3wuG.png)
Alternatively, the town portal spell icon, taken from the Diablo 1 icon (https://vignette.wikia.nocookie.net/diablo/images/c/cd/Town-portal-sp.gif/revision/latest?cb=20090203144248)Show Image(https://i.imgur.com/I7fXXbg.png)Show Image(https://i.imgur.com/mcTQo8A.png)
An angel holding the health orb and a demon holding the mana orb, from the Diablo 2 interface (https://vignette.wikia.nocookie.net/diablo/images/c/ce/Smite01.jpg/revision/latest?cb=20151130155954)Show Image(https://i.imgur.com/gZFAaPA.png)Show Image(https://i.imgur.com/9eRiz7h.png)
A health and mana potion based on the Diablo 3 health potion (https://www.diablowiki.net/images/thumb/a/a4/Health-potion-tooltip-ros.JPG/300px-Health-potion-tooltip-ros.JPG)
I can provide SVG format files of any of these :)
I really like the potions and portal, so clean :). Other than that, I think the diablo head could look better if it showed of more of his horns/upper head.
Those two were also the ones I liked from the bunch, the remainder needs heavy refinement in the outlines :p
Wow this is running way earlier than I expected, not that I am disappointed!
Are the homing keys scooped or barred? I prefer to have both if possible
These are running in cherry profile pbtWow this is running way earlier than I expected, not that I am disappointed!
Are the homing keys scooped or barred? I prefer to have both if possible
Scooped? DCS profile? Is that a thing?
These are running in cherry profile pbtWow this is running way earlier than I expected, not that I am disappointed!It's simply progressing faster than I expected lol.
Are the homing keys scooped or barred? I prefer to have both if possible
damn, I'll need to ask the vendor about that. I, myself prefer scooped.
Scooped? DCS profile? Is that a thing?
Wow this is running way earlier than I expected, not that I am disappointed!
Are the homing keys scooped or barred? I prefer to have both if possible
Wow this is running way earlier than I expected, not that I am disappointed!
Are the homing keys scooped or barred? I prefer to have both if possible
Scooped? DCS profile? Is that a thing?
These are running in cherry profile pbtWow this is running way earlier than I expected, not that I am disappointed!It's simply progressing faster than I expected lol.
Are the homing keys scooped or barred? I prefer to have both if possible
damn, I'll need to ask the vendor about that. I, myself prefer scooped.
Scooped? DCS profile? Is that a thing?Wow this is running way earlier than I expected, not that I am disappointed!
Are the homing keys scooped or barred? I prefer to have both if possibleWow this is running way earlier than I expected, not that I am disappointed!
Are the homing keys scooped or barred? I prefer to have both if possible
Scooped? DCS profile? Is that a thing?
It's Cherry Profile PBT Dyesubbed.
What quality are the keycaps? How thick are they? Is this made with Everglide?No. it's from Keyreative.
So... barred, scooped, or both? :confused:i'm trying to contact the vendor as for now. but when i see their past set, all the set that the have produced is barred.
What quality are the keycaps? How thick are they? Is this made with Everglide?No. it's from Keyreative.So... barred, scooped, or both? :confused:i'm trying to contact the vendor as for now. but when i see their past set, all the set that the have produced is barred.
I was always under the impression that you can't dyesub a lighter color onto a darker one, like a red on a black. So this "5 side dye-sub" process allows you to do that?
thanks for helping me answer that!I was always under the impression that you can't dyesub a lighter color onto a darker one, like a red on a black. So this "5 side dye-sub" process allows you to do that?
In order to do something like red-on-black dye-sub, they take a red keycap, dye the four sides of it black and dye the top black except for where they want the legend, so you're left with that non-dyed red legend on an otherwise now black keycap. Hence the name of 5 side dye-subbing.
I am highly interested if there will be some bottom row 1U and 1.5U keys available (add-on set?). I would love to put this on my Gamdias but it has a nonstandard bottom row of 1.5/1/1.5/6/1.5/1/1/1.5.
Specifically, this one:Show Image(https://www.overclockers.ua/peripheral/gamdias-hermes-gkb2010/24-big-gamdias-hermes-gkb2010.jpg)
this set is still scheduled to run after Terminal R2. please waiiit.I'm not sure, I'll do some homework and find a set of symbols that look in the spirit of the set, I guess. For now, I guess katakana or greek subs are possibilities
yeah, i'm feeling better but the yearly closing on my company is killing me again (Financial year for Japanese company is April to March, FYI).
no idea for sublegends just yet. what are you suggesting?
no updates yet. still working on a typefont and novelties. lmao
If one were to do sub-legends - especially considering custom legends are easier with dye sub - then the 33 runes from Diablo II would be ideal.I really like this idea. After the typeway/font gets finished up we should def take a poll to see if there would be interest in rune sublegends.Show Image(https://i.ytimg.com/vi/sZEfEEfvt_E/maxresdefault.jpg)
Sorry for the low quality image, but this best displays all the runes with their respective names.
There are exactly 33 keys occupying the main alpha area in the center of the keyboard which just makes the idea make that much more sense and work so much more perfectly.
The only concern is that the keys on the right hand side already have sub-legends to fit two different symbols.
runic sub legend will take the time too much. I guess i can do it but i can't promise a thing.
As for sir blaze, i think remsky's opinion already represented my opinion that katakana/greek sub legend goes against the idea of this set, so i won't add those sub legends in this run, sorry :(
i posted a little update at post #2. but for some of you who are lazy, i'll post at this as well.
xx(forgot when)/3 - Purchased fonts. (I don't want exocet creator to sue me). a selection of novelties are selected. 4 of them being diablo's [X] on esc, a Potion for Q, Town portal for T (keeping the original concept), diablo skull on Esc, and Sanctuary for enter.
there's a little surprise coming for F row. so that's 17 novelties in total. maybe i'll add 3 more for Print screen, scroll lock and pause. also Blue orb and Red orb for each 1u and 1.25u. totalling frikkin' 24 keys.
i posted a little update at post #2. but for some of you who are lazy, i'll post at this as well.
xx(forgot when)/3 - Purchased fonts. (I don't want exocet creator to sue me). a selection of novelties are selected. 4 of them being diablo's [X] on esc, a Potion for Q, Town portal for T (keeping the original concept), diablo skull on Esc, and Sanctuary for enter.
there's a little surprise coming for F row. so that's 17 novelties in total. maybe i'll add 3 more for Print screen, scroll lock and pause. also Blue orb and Red orb for each 1u and 1.25u. totalling frikkin' 24 keys.
I am a bit confused by your post and what you mean? Are you saying the alphas will be different from whats in the renders? Also will the set include non novelties for Q,T because I would prefer standard letters/numbers I do like the Red and blue orbs thought that's a must. Don't forget the buff potions if you needed any substitute novelties. So far really loving this set I can't wait. Hopefully it still shoots in at the sub 120 dollar range.
right, i have updated the image at page 1. it should be more clear now.Pro kit needs a fix. Alt on left should be Alt not Alt Gr
we are scheduled to run after terminal r2 gb. that's around 4 weeks from now. i'll update the exact date when the terminal r2 begins.
right, i have updated the image at page 1. it should be more clear now.Pro kit needs a fix. Alt on left should be Alt not Alt Gr
we are scheduled to run after terminal r2 gb. that's around 4 weeks from now. i'll update the exact date when the terminal r2 begins.
Sent from my mobile using Tapatalk
right, i have updated the image at page 1. it should be more clear now.
we are scheduled to run after terminal r2 gb. that's around 4 weeks from now. i'll update the exact date when the terminal r2 begins.
scheduled to run after terminal r2 gb. that's around 4 weeks from now.
scheduled to run after terminal r2 gb. that's around 4 weeks from now.
It might be hard to get a lot of this set sold because of the large amount of other sets that are planned to release soon, but I'm confident the low MOQ will help towards the set being successful seeing how many people are interested in it.
I take that back, I really dont think Icon mods work well with exocet text. It just looks out of place.
im in
Opened When..??!?
And.. Winkey angel and demon Not Incloud??
terminal is supposed to run this week. but it's delayed because one of the TKC founder are very busy with his personal problem right now.scheduled to run after terminal r2 gb. that's around 4 weeks from now.
It might be hard to get a lot of this set sold because of the large amount of other sets that are planned to release soon, but I'm confident the low MOQ will help towards the set being successful seeing how many people are interested in it.
any sets you had in mind actually? since Terminal is delayed and then TKC is actually also planning to run GMK Skidata R2 (name tbd), so I'm guessing this may come at the same time or maybe even after so thats actually quite a ways away. If this is the case, it kinda steer clear of sets coming till like mid to late Q3-ish tbh so won't clash with any sets coming 'soon'.
I do kinda prefer to believe this is the case as that would mean there will be time to sort out even further things for GB like more proxies etc.
right, i have updated the image at page 1. it should be more clear now.
we are scheduled to run after terminal r2 gb. that's around 4 weeks from now. i'll update the exact date when the terminal r2 begins.
Fantastic! Not long now. Also, you may wanna spell check your signature line... :-X
It looks pretty good, but seeing “Caps Lock” and “tab” spelled out in Exocet looks so wrong. Seeing something so mundane spelled out in a cool font ruins the vibe for me. I would strongly prefer the icon modifiers of the DCS set.
the MOQ is (kinda) low, and i have planned that the release of this set won't overlap the others. with the low price as well, i'm confident this set can make it through :))scheduled to run after terminal r2 gb. that's around 4 weeks from now.
It might be hard to get a lot of this set sold because of the large amount of other sets that are planned to release soon, but I'm confident the low MOQ will help towards the set being successful seeing how many people are interested in it.
Always down for some black/red. Hope pricing is in my budget. What are people's opinions of DCS?This isn't DCS, its 5 way pbt dyesub. Cherry profile.
Always down for some black/red. Hope pricing is in my budget. What are people's opinions of DCS?This isn't DCS, its 5 way pbt dyesub. Cherry profile.
A small request and I'm not sure if this is even doable, but if there could be a pack with 10-20 or so single caps (maybe novelties) to put on macro keys that would be great. My Gamdias has 5 on the side, 6 on the bottom and 2 next to the arrow keys so they look kind of out of place if the other keys don't match.
terminal is supposed to run this week. but it's delayed because one of the TKC founder are very busy with his personal problem right now.scheduled to run after terminal r2 gb. that's around 4 weeks from now.
It might be hard to get a lot of this set sold because of the large amount of other sets that are planned to release soon, but I'm confident the low MOQ will help towards the set being successful seeing how many people are interested in it.
any sets you had in mind actually? since Terminal is delayed and then TKC is actually also planning to run GMK Skidata R2 (name tbd), so I'm guessing this may come at the same time or maybe even after so thats actually quite a ways away. If this is the case, it kinda steer clear of sets coming till like mid to late Q3-ish tbh so won't clash with any sets coming 'soon'.
I do kinda prefer to believe this is the case as that would mean there will be time to sort out even further things for GB like more proxies etc.
yeah, i'm still discussing about proxies and such. more proxies will be announced soon, I hope. i'm looking somewhere around EU as we speak.
is this still slated to run with thekeycompany? I mean as of the moment seems all there project's are on hold due to real life issues. I would be cool with just ZFrontier running it they seem to have a good proven track record. Are allowing someone else other then Kono in the community to take the reigns of selling it. Still really really excited this is hands down one of my favorite sets for 2018Its still with TKC rn, set will still happen, its still slotted for after terminal R2.
Big fan of the way this set looks. Diablo was an instrumental part of my childhood. I dont have any boards to use it on as its a little sparce for dactyl/manuform.
is this still slated to run with thekeycompany? I mean as of the moment seems all there project's are on hold due to real life issues. I would be cool with just ZFrontier running it they seem to have a good proven track record. Are allowing someone else other then Kono in the community to take the reigns of selling it. Still really really excited this is hands down one of my favorite sets for 2018
terminal is supposed to run this week. but it's delayed because one of the TKC founder are very busy with his personal problem right now.scheduled to run after terminal r2 gb. that's around 4 weeks from now.
It might be hard to get a lot of this set sold because of the large amount of other sets that are planned to release soon, but I'm confident the low MOQ will help towards the set being successful seeing how many people are interested in it.
any sets you had in mind actually? since Terminal is delayed and then TKC is actually also planning to run GMK Skidata R2 (name tbd), so I'm guessing this may come at the same time or maybe even after so thats actually quite a ways away. If this is the case, it kinda steer clear of sets coming till like mid to late Q3-ish tbh so won't clash with any sets coming 'soon'.
I do kinda prefer to believe this is the case as that would mean there will be time to sort out even further things for GB like more proxies etc.
yeah, i'm still discussing about proxies and such. more proxies will be announced soon, I hope. i'm looking somewhere around EU as we speak.
mykeyboard.eu have recently been so active in being EU GB proxy for many different sets, not sure if they've got their hands full but they might be willing :)
A small request and I'm not sure if this is even doable, but if there could be a pack with 10-20 or so single caps (maybe novelties) to put on macro keys that would be great. My Gamdias has 5 on the side, 6 on the bottom and 2 next to the arrow keys so they look kind of out of place if the other keys don't match.
is this still slated to run with thekeycompany? I mean as of the moment seems all there project's are on hold due to real life issues. I would be cool with just ZFrontier running it they seem to have a good proven track record. Are allowing someone else other then Kono in the community to take the reigns of selling it. Still really really excited this is hands down one of my favorite sets for 2018Its still with TKC rn, set will still happen, its still slotted for after terminal R2.
I would get an icon-only set for this. Ideas for novelties - health globes with the demons (the health bar and mana bar for each character below) - and of course the ring gfx (blue stone, etc.)
Is the estimated date for GB still on track, or delayed? I really want this setThis set was linked to TKC, so I think you can imagine why it has been delayed so long lol.
This should run before r2 of terminal. I prefer it way more so I'm biased haha. Please don't let this set die! It's one of the best on IC imo
Any update on the timetable for when the gb will be happening?
This should run before r2 of terminal. I prefer it way more so I'm biased haha. Please don't let this set die! It's one of the best on IC imo
I think it'll run after terminal r2!
This should run before r2 of terminal. I prefer it way more so I'm biased haha. Please don't let this set die! It's one of the best on IC imo
Stay awhile and listen ;D^
Any update on the timetable for when the gb will be happening?
Any update for this group buy? :D
hiya, sorry for the long silence.Any update on the timetable for when the gb will be happening?
Pretty sure it’s still planned for after Terminal R2
alright, time to revive this again.
as the Terminal GB is ending, we have some big updates for ya.
alright, time to revive this again.
as the Terminal GB is ending, we have some big updates for ya.
How thick are the PBT caps?
yes pls
I’m happy that there’s ergodox support, but I wish they were blanks. Rest of the kits are looking good though.
Hoo boy, after gathering info from reddit, here and KBtalk, i think more novelties is in order.Yaaaaaaas
Hoo boy, after gathering info from reddit, here and KBtalk, i think more novelties is in order.
Hoo boy, after gathering info from reddit, here and KBtalk, i think more novelties is in order.
Hoo boy, after gathering info from reddit, here and KBtalk, i think more novelties is in order.yes, need something like the gamer kit in dcs sancturay :p
Hoo boy, after gathering info from reddit, here and KBtalk, i think more novelties is in order.
do you mean the Tomb of Tal Rasha?
(Attachment Link)
(¬‿¬)
(image from XDA Milestone)
Hoo boy, after gathering info from reddit, here and KBtalk, i think more novelties is in order.
Here's my weak request for Novelties:
1)"NEPHALEM" on the Enter key as a novelty with inverted colors of Red with Black text.
2)"Mana" for a stepped/normal as a novelty, blue keycap, black text.
Even if my requests are not met, i'll still be in for the full set except ISO/INT.
BECAUSE PBT. :thumb:
Hoo boy, after gathering info from reddit, here and KBtalk, i think more novelties is in order.yes, need something like the gamer kit in dcs sancturay :p
Can I suggest some weapon's for novelties? Perhaps even some inspiration for you https://diablo.gamepedia.com/Unique_Weapons_(Diablo_I)
Can I suggest some weapon's for novelties? Perhaps even some inspiration for you https://diablo.gamepedia.com/Unique_Weapons_(Diablo_I)
That link seemed broken for me, but this one works just as well.
http://classic.battle.net/diablo2exp/items/uniques.shtml
However, with the limited amount of novelties that would be available it would probably be best to go for the iconic items as opposed to just throwing random weapons on there. Personally, I feel like that would include at least the below:
Helms - Harlequin Crest Shako and Crown of Ages Corona
Shield - Stormshield Monarch
Bow - Windforce Hydra Bow
2h Sword - The Grandfather Colossus Sword
And obviously the Horadric Cube :D
As for the weapon keycaps.. can you suggest the right place to put it in?
As for the weapon keycaps.. can you suggest the right place to put it in?
I would suggest that you put them on "vertical function keys"
(Attachment Link)
but it seems there are not many boards with that features.
alternatively, people might put those keys in the right side of 65% keyboard.
have a question on the novelty cap for the Diablo Portal. Is that design final?
Because in my opinion, I think the design looks abit.... lackluster, the original Sanctuary set's Portal is nicer compared to this new design; whereas the Potion and Diablo head, is very much detailed and sharper compared to the original Sanctuary set.
As for the weapon keycaps.. can you suggest the right place to put it in?
I would suggest that you put them on "vertical function keys"
(Attachment Link)
but it seems there are not many boards with that features.
alternatively, people might put those keys in the right side of 65% keyboard.
have a question on the novelty cap for the Diablo Portal. Is that design final?
Because in my opinion, I think the design looks abit.... lackluster, the original Sanctuary set's Portal is nicer compared to this new design; whereas the Potion and Diablo head, is very much detailed and sharper compared to the original Sanctuary set.
have a question on the novelty cap for the Diablo Portal. Is that design final?
Because in my opinion, I think the design looks abit.... lackluster, the original Sanctuary set's Portal is nicer compared to this new design; whereas the Potion and Diablo head, is very much detailed and sharper compared to the original Sanctuary set.
I think just making the portal it a bit thicker would help :)
have a question on the novelty cap for the Diablo Portal. Is that design final?
Because in my opinion, I think the design looks abit.... lackluster, the original Sanctuary set's Portal is nicer compared to this new design; whereas the Potion and Diablo head, is very much detailed and sharper compared to the original Sanctuary set.
I think just making the portal it a bit thicker would help :)
but i might try this tho.
NICE!!! That thin portal has been bothering me cause it felt awkward, good to hear that it might take some revision :D
NICE!!! That thin portal has been bothering me cause it felt awkward, good to hear that it might take some revision :D
the base image won't change, but i'll see what i can do about thicc-ening it a little bit. :))
I guess it might be even earlier than that..(https://media.giphy.com/media/3o6UBgTW5niwy25kkw/giphy.gif)
Hoo boy, after gathering info from reddit, here and KBtalk, i think more novelties is in order.
do you mean the Tomb of Tal Rasha?
(Attachment Link)
(¬‿¬)
(image from XDA Milestone)
Love them tooHoo boy, after gathering info from reddit, here and KBtalk, i think more novelties is in order.
do you mean the Tomb of Tal Rasha?
(Attachment Link)
(¬‿¬)
(image from XDA Milestone)
I would kill for a set of rune alphas like this :)
Other novelty ideas:
- A scroll (Like scroll of identity/portal)
- Soulstone
- Stone of Jordan ring (Maybe difficult because it doesn't look different than other rings)
- Pentagram (Used a lot throughout the games like in the menus https://i.imgur.com/m3whsbC.png)
I’m happy that there’s ergodox support, but I wish they were blanks. Rest of the kits are looking good though.
Think I might have to get in on this. I'm very keen to see the quality of the keyreative dyesubbing. Drifter looked great but was wrong profile for me.+1
hiya. we are still waiting for the samples. novelties are alrd done but I'm not showing it to you all yet :p
and yeah, 2u shift can be replaced using 2u spacebar.
pls be patient guys! i know i am not patient as well but still..
I’m happy that there’s ergodox support, but I wish they were blanks. Rest of the kits are looking good though.
I'll second this, a blank ergodox set would be better imo.
Can we has ISO in base kit XDpls i myself want WKL at the base kit
I'd say don't put ISO in the base kit if its going to raise the price, might put people off getting keys they don't need
Anyway looks really nice, always wanted a cherry profile sanctuary set, since the first Sanctuary set was my first keyset I got, will deffo be getting this.
I'd say don't put ISO in the base kit if its going to raise the price, might put people off getting keys they don't need
Anyway looks really nice, always wanted a cherry profile sanctuary set, since the first Sanctuary set was my first keyset I got, will deffo be getting this.
Long time D2 player. D2 has some nice symbols to use, especially the runes as novelties. i would 100% buy a Jah Ith Ber rune’d keycaps!
https://diablo2.diablowiki.net/Rune_list (https://diablo2.diablowiki.net/Rune_list)
Keyreative afaik.
Praise PBT
In, spent too many hours playing every Diablo and Path of Exile.
it has been awhile, any updates on this? :'( :'(Keep asking, I think that’ll speed it up
sorry. we are still waiting for the samples. i have to heard from TKC/zF as for now :(
Heya ruru :pI'd say don't put ISO in the base kit if its going to raise the price, might put people off getting keys they don't need
Anyway looks really nice, always wanted a cherry profile sanctuary set, since the first Sanctuary set was my first keyset I got, will deffo be getting this.
Hi Fire!!!
Yes! And PBT dysesub as well. Hope the price is not too crazy :-[
Heya ruru :pI'd say don't put ISO in the base kit if its going to raise the price, might put people off getting keys they don't need
Anyway looks really nice, always wanted a cherry profile sanctuary set, since the first Sanctuary set was my first keyset I got, will deffo be getting this.
Hi Fire!!!
Yes! And PBT dysesub as well. Hope the price is not too crazy :-[
:pNorDe kit available. 100% inHeya ruru :pI'd say don't put ISO in the base kit if its going to raise the price, might put people off getting keys they don't need
Anyway looks really nice, always wanted a cherry profile sanctuary set, since the first Sanctuary set was my first keyset I got, will deffo be getting this.
Hi Fire!!!
Yes! And PBT dysesub as well. Hope the price is not too crazy :-[
Sent from my iPhone using Tapatalk
How can i help design novelties? I want to contribute !
How can i help design novelties? I want to contribute !
The novelties are already set.
How can i help design novelties? I want to contribute !
The novelties are already set.
If that’s the case, then that’s really depressing :/
there so much opportunity to expand on them .
The current set is underwhelming.
on a side note, is there a resource on how to get started on designing novelties?
I want to make an attempt as a side project, unrelated to this one.
great set, i hope there will be a EU proxy (mykeyboard?)
dying to pay for this
when does it start????
Feels like we've been waiting foreverrrrrrr
great set, i hope there will be a EU proxy (mykeyboard?)
All region will have proxy, so don't worry ;)dying to pay for thiswhen does it start????Feels like we've been waiting foreverrrrrrr
It seems the samples delayed due to Milkshake and Oblique order, I myself is in the same condition as you guys, waiting in cold feet.
In the mean time, please visit the web for a more comprehensive and easy-to-digest content >> https://jebbra.net/sanctuary-rebirth
+1+1+1+1 i've been waiting forever. still waiting for the samples. this post is just to assure you that this set is not dead.
So is 5 way all over dyesub some kind of sorcery that lets dyesub have bright legends?
So is 5 way all over dyesub some kind of sorcery that lets dyesub have bright legends?
Yes, the trick is: the black color base key is actually printed too.
Usual dyesub is using injection-colored base key then printed the legend over it thus making it impossible to do a brighter legend in darker base key or just make any colorful legend looks muted in non-white base keys.
With all-over dyesub you just straight printed both the legend and the color base key.
So is 5 way all over dyesub some kind of sorcery that lets dyesub have bright legends?
Yes, the trick is: the black color base key is actually printed too.
Usual dyesub is using injection-colored base key then printed the legend over it thus making it impossible to do a brighter legend in darker base key or just make any colorful legend looks muted in non-white base keys.
With all-over dyesub you just straight printed both the legend and the color base key.
How does the print go around corners of the keycap so consistently? Are there 5 small sheets that get transferred to each side or one intricate thing that sleeves over the keycap?!
All in on this one. Please start GB soon!+1 i need this.
Update: Samples arrives. miscommunication occurred (Read: They picked the wrong shade of red) :(
the waiting game goes on...
Update: Samples arrives. miscommunication occurred (Read: They picked the wrong shade of red) :(
the waiting game goes on...
i'm sorry x__xUpdate: Samples arrives. miscommunication occurred (Read: They picked the wrong shade of red) :(
the waiting game goes on...
When you're got up and down by just a simple sentence.
Update: Samples arrives. miscommunication occurred (Read: They picked the wrong shade of red) :(
the waiting game goes on...
Hmmm... super rare pink diablo mods for a giveaway? :p
edit: I'M JUST MAKING JOKES. Do not misread and assume such things actually exist, I'm sure the flubs are boring!
Update: Samples arrives. miscommunication occurred (Read: They picked the wrong shade of red) :(
the waiting game goes on...
Is there some way of incorporating the __________ announcement as a meme?>:)
1) it's a bit late now and
2) it's best we pretend that never happened. :rolleyes:
When is it comingWho knows at this point
When is it comingWho knows at this point
I'm still here.
keyreative is so slow .....................
Why a letter ? Do you guys not have phones ?
This is still ongoing, trust me. IDK if I can disclose info yet w/o bun's consent. I'll yell at him in discord to give you guys an update.
This is still ongoing, trust me. IDK if I can disclose info yet w/o bun's consent. I'll yell at him in discord to give you guys an update.
This is still ongoing, trust me. IDK if I can disclose info yet w/o bun's consent. I'll yell at him in discord to give you guys an update.
OMG OMG OMG OMG OMG!!!
I have limited money - should I postpone all my other purchases to fit this one in???
It def wont be during the new year.This is still ongoing, trust me. IDK if I can disclose info yet w/o bun's consent. I'll yell at him in discord to give you guys an update.
OMG OMG OMG OMG OMG!!!
I have limited money - should I postpone all my other purchases to fit this one in???
I'm hoping that any kind of GB doesn't happen until at least the start of the new year, since Godspeed ate my disposable income for the month.
It def wont be during the new year.This is still ongoing, trust me. IDK if I can disclose info yet w/o bun's consent. I'll yell at him in discord to give you guys an update.
OMG OMG OMG OMG OMG!!!
I have limited money - should I postpone all my other purchases to fit this one in???
I'm hoping that any kind of GB doesn't happen until at least the start of the new year, since Godspeed ate my disposable income for the month.
It def wont be during the new year.This is still ongoing, trust me. IDK if I can disclose info yet w/o bun's consent. I'll yell at him in discord to give you guys an update.
OMG OMG OMG OMG OMG!!!
I have limited money - should I postpone all my other purchases to fit this one in???
I'm hoping that any kind of GB doesn't happen until at least the start of the new year, since Godspeed ate my disposable income for the month.
hiya guys!
sorry for no update for so long. i don't like the radio silence but i think that's what happened when you don't have anything to update.
so first thing first.
this set is still alive.
keyreative ghosted us. fk em. we're switching factory to another factory. i'm gonna send em a super-toxic-copypasta by remsky truly to them later.
this new factory already got some reputation for making a decent reverse dyesub keyset, but i am still being skeptic here, so i am requesting another sample run to the factory.
we are stillll working close on this, so please gimme a chance. and be patienttttttt.
(i know it's gonna be another 1-year-IC, but this set is still gonna happen).
uhuhh and.
because the factory changed, the contents of the set will be changed as well. we are going to drop a few keys... but i hope not to many to hurt our compatibility.
and....
i hope moq doesn't change. tkc and zf are still going to support us on this but still.....
for a set like this I am ok with waiting and glad things are being proactively worked on. As you said if the first factory wants to ghost.. then its time to move on. Otherwise your just begging for issues. I do want to ask have you thought of contacting JTK? I think they do dysub right? I might be mistaken. or enjoypbt? I think they might also do dyesub but perhaps not reverse dyesub. Eitherway I am excited for this set glad its not dead just being worked on.
hiya guys!
sorry for no update for so long. i don't like the radio silence but i think that's what happened when you don't have anything to update.
so first thing first.
this set is still alive.
keyreative ghosted us. fk em. we're switching factory to another factory. i'm gonna send em a super-toxic-copypasta by remsky truly to them later.
this new factory already got some reputation for making a decent reverse dyesub keyset, but i am still being skeptic here, so i am requesting another sample run to the factory.
we are stillll working close on this, so please gimme a chance. and be patienttttttt.
(i know it's gonna be another 1-year-IC, but this set is still gonna happen).
uhuhh and.
because the factory changed, the contents of the set will be changed as well. we are going to drop a few keys... but i hope not to many to hurt our compatibility.
and....
i hope moq doesn't change. tkc and zf are still going to support us on this but still.....
hiya guys!
sorry for no update for so long. i don't like the radio silence but i think that's what happened when you don't have anything to update.
so first thing first.
this set is still alive.
keyreative ghosted us. fk em. we're switching factory to another factory. i'm gonna send em a super-toxic-copypasta by remsky truly to them later.
this new factory already got some reputation for making a decent reverse dyesub keyset, but i am still being skeptic here, so i am requesting another sample run to the factory.
we are stillll working close on this, so please gimme a chance. and be patienttttttt.
(i know it's gonna be another 1-year-IC, but this set is still gonna happen).
uhuhh and.
because the factory changed, the contents of the set will be changed as well. we are going to drop a few keys... but i hope not to many to hurt our compatibility.
and....
i hope moq doesn't change. tkc and zf are still going to support us on this but still.....
Actually how about GMK?
This will be an instant success.
we are stillll working close on this, so please gimme a chance. and be patienttttttt.
If we switch to GMK (a.k.a ABS) then this keyset will lose 50% of its value.
Keep it pbtPBT
Abs is a passs
Sent from my iPhone using Tapatalk
A GMK version would be insanely expensive, no thank youyes. gmk version with exocet legend will be insanely expensive.
Actually how about GMK?
This will be an instant success.
That would basically be GMK demonic. The selling point of the set isn't the color but the font, unless I'm mistaken and someone can correct me.
Or maybe V2 DCS?this.. maybe we can discuss over this once this run ends.
hiya guys!
sorry for no update for so long. i don't like the radio silence but i think that's what happened when you don't have anything to update.
so first thing first.
this set is still alive.
keyreative ghosted us. fk em. we're switching factory to another factory. i'm gonna send em a super-toxic-copypasta by remsky truly to them later.
this new factory already got some reputation for making a decent reverse dyesub keyset, but i am still being skeptic here, so i am requesting another sample run to the factory.
we are stillll working close on this, so please gimme a chance. and be patienttttttt.
(i know it's gonna be another 1-year-IC, but this set is still gonna happen).
uhuhh and.
because the factory changed, the contents of the set will be changed as well. we are going to drop a few keys... but i hope not to many to hurt our compatibility.
and....
i hope moq doesn't change. tkc and zf are still going to support us on this but still.....
Actually how about GMK?
This will be an instant success.
My only request is that you do not just settle for the new manufacturer if you don't think their job is up to par - dyesub is VERY particular and that's pretty scary, please be wary (which I'm sure you will be).
Sanctuary should be kept DCS or a form of PBT dyesub. And "happening" is much much better than "not happening" so I don't care if there's some delay :)+1
i am pretty perfectionist at everything i work.
my initial goal is to make a sample that will satisfy us all.
Can it be even via EnjoyPBT?Epbt would be amazing
Of course there are people out there who are also expert in reverse dye-sub, e.g. the Japanese custom dye-sub makers on Etsy
https://www.etsy.com/listing/190868733/
https://www.etsy.com/listing/217761281/
Can it be even via EnjoyPBT?
Of course there are people out there who are also expert in reverse dye-sub, e.g. the Japanese custom dye-sub makers on Etsy
https://www.etsy.com/listing/190868733/
https://www.etsy.com/listing/217761281/
Disappointing to hear about Keyreative. Them manufacturing would've been an insta-buy.
Hopefully this doesn't end up with the same company that did DSA Groove... (https://imgur.com/a/LJfNxhm)
KAT... i am afraid that if i were to change it to KAT profile, there will be another controversies here lol
kat is trash
cherry profile only
thanks
c:
kat is trash
cherry profile only
thanks
c:
seconded
c:
Any updates lately?
KAT... i am afraid that if i were to change it to KAT profile, there will be another controversies here lol
KAT... i am afraid that if i were to change it to KAT profile, there will be another controversies here lol
While we wait for the dysub manufacturer, maybe run another DCS GB with SP? Think lots of people will be interested.
:)
kat is trash
cherry profile only
thanks
c:
seconded
c:
thirded
:c
KAT... i am afraid that if i were to change it to KAT profile, there will be another controversies here lol
While we wait for the dysub manufacturer, maybe run another DCS GB with SP? Think lots of people will be interested.
:)
KAT is OK, but most people want Cherry/DCS.
+1 on bringing back SP DCS. Prefer thin. Pricing might not be good though.
Any word on those samples? :-\
I was watching top clack last Thursday when they had thekey.company on. I believe he said the current plan is to use the same manufacturer they are using for cherry pbt katakana that's currently running. He also stated that he hopes the set will be ready for GB after the Skiidata GB, but it could get pushed back further in his queue if it's not ready.
Sent from my ONEPLUS A6013 using Tapatalk
I was watching top clack last Thursday when they had thekey.company on. I believe he said the current plan is to use the same manufacturer they are using for cherry pbt katakana that's currently running. He also stated that he hopes the set will be ready for GB after the Skiidata GB, but it could get pushed back further in his queue if it's not ready.
Sent from my ONEPLUS A6013 using Tapatalk
Interesting. Wish this information was given officially in places like this instead.
But at least it's still coming. Thanks!
Small little update from TKC:
Waiting on new mockups from u/jebbra to send for a sample. We will not be able to make a bunch of child kits (if we want Cherry profile) so it will be one big mega-set very similar to the Katakana Cherry sets. Should see some news in the coming months! I plan to run it this year.
Will the NorDe Kit stay?I really hope it does :'(
Gesendet von meinem H8416 mit Tapatalk
Small little update from TKC:Please keep the pro kit. at least spacebars support.
Waiting on new mockups from u/jebbra to send for a sample. We will not be able to make a bunch of child kits (if we want Cherry profile) so it will be one big mega-set very similar to the Katakana Cherry sets. Should see some news in the coming months! I plan to run it this year.
Honestly I'm worried about the longevity of this allover dyesub. If it ends up fading then the true plastic color will start to show, especially around the home key bars. If that color is white, then it's going to ruin the whole vibe of this set. Hoping that since the only colors here are red and black, the actual keycap plastic can just be red.
Sent from my LG-H918 using Tapatalk
Any updates on this?
Any updates on this?
Looks like The Key Company has it listed for May... Let's see what happens!
https://thekey.company/collections/coming-soon/products/sanctuary-rebirth-pbt
Any updates on this?
Looks like The Key Company has it listed for May... Let's see what happens!
https://thekey.company/collections/coming-soon/products/sanctuary-rebirth-pbt
Is it weird that we haven't seen the sample yet but they already listed it on their website?
That's .... not red :-[Any updates on this?
Looks like The Key Company has it listed for May... Let's see what happens!
https://thekey.company/collections/coming-soon/products/sanctuary-rebirth-pbt
Is it weird that we haven't seen the sample yet but they already listed it on their website?
Yes, very. I didn't believe it when someone told me about the listing lol
Really hope we can get a sample soon, I have seen some odd ones floating around like this one (https://cdn.discordapp.com/attachments/234802192014508033/567540824036868126/QQ20190401-0.jpg) but otherwise nothing.
Looks red to meThat's .... not red :-[Any updates on this?
Looks like The Key Company has it listed for May... Let's see what happens!
https://thekey.company/collections/coming-soon/products/sanctuary-rebirth-pbt
Is it weird that we haven't seen the sample yet but they already listed it on their website?
Yes, very. I didn't believe it when someone told me about the listing lol
Really hope we can get a sample soon, I have seen some odd ones floating around like this one (https://cdn.discordapp.com/attachments/234802192014508033/567540824036868126/QQ20190401-0.jpg) but otherwise nothing.
Looks red to meThat's .... not red :-[Any updates on this?
Looks like The Key Company has it listed for May... Let's see what happens!
https://thekey.company/collections/coming-soon/products/sanctuary-rebirth-pbt
Is it weird that we haven't seen the sample yet but they already listed it on their website?
Yes, very. I didn't believe it when someone told me about the listing lol
Really hope we can get a sample soon, I have seen some odd ones floating around like this one (https://cdn.discordapp.com/attachments/234802192014508033/567540824036868126/QQ20190401-0.jpg) but otherwise nothing.
Sent from my LG-H918 using Tapatalk
Looks red to meThat's .... not red :-[Any updates on this?
Looks like The Key Company has it listed for May... Let's see what happens!
https://thekey.company/collections/coming-soon/products/sanctuary-rebirth-pbt
Is it weird that we haven't seen the sample yet but they already listed it on their website?
Yes, very. I didn't believe it when someone told me about the listing lol
Really hope we can get a sample soon, I have seen some odd ones floating around like this one (https://cdn.discordapp.com/attachments/234802192014508033/567540824036868126/QQ20190401-0.jpg) but otherwise nothing.
Sent from my LG-H918 using Tapatalk
Seems very pink-ish and far from the renders...
That's .... not red :-[Any updates on this?
Looks like The Key Company has it listed for May... Let's see what happens!
https://thekey.company/collections/coming-soon/products/sanctuary-rebirth-pbt
Is it weird that we haven't seen the sample yet but they already listed it on their website?
Yes, very. I didn't believe it when someone told me about the listing lol
Really hope we can get a sample soon, I have seen some odd ones floating around like this one (https://cdn.discordapp.com/attachments/234802192014508033/567540824036868126/QQ20190401-0.jpg) but otherwise nothing.
Well then... We are gonna need some samples or confirmation if this this is supposed to launch next month! ;DThat's .... not red :-[Any updates on this?
Looks like The Key Company has it listed for May... Let's see what happens!
https://thekey.company/collections/coming-soon/products/sanctuary-rebirth-pbt
Is it weird that we haven't seen the sample yet but they already listed it on their website?
Yes, very. I didn't believe it when someone told me about the listing lol
Really hope we can get a sample soon, I have seen some odd ones floating around like this one (https://cdn.discordapp.com/attachments/234802192014508033/567540824036868126/QQ20190401-0.jpg) but otherwise nothing.
I don't think thats real. I can't see a company producing a single full keyset as a sample. Most likely that was the original buy from like what 2013? that someone threw a logo on and posted for karma or what ever.
Just stumbled into this thread. Wow, PBT? I’m in.It does go with the theme, it's the button that closes out menus in Diablo 2.
But, looking at this render: The 0 (zero) looks so out of place. Did nobody consider using the Omega Ω sign for that?
Roman numerals don’t have zero anyway, why not go with something a bit cooler and still fits the theme?Show Image(https://cdn.shopify.com/s/files/1/1679/2319/products/Sancturay-home-page_2048x.png?v=1555101079)
Yeah i was referring to the number row. The zero looks rather jarring when put next to the other Roman numeral keys.Just stumbled into this thread. Wow, PBT? I’m in.It does go with the theme, it's the button that closes out menus in Diablo 2.
But, looking at this render: The 0 (zero) looks so out of place. Did nobody consider using the Omega Ω sign for that?
Roman numerals don’t have zero anyway, why not go with something a bit cooler and still fits the theme?Show Image(https://cdn.shopify.com/s/files/1/1679/2319/products/Sancturay-home-page_2048x.png?v=1555101079)
EDIT: Realized you might be talking about 0 and not the esc key whoops. Still, in this image you can see that's what the 0 looks like in the game.Show Image(http://majorslack.com/pics/screenshots/diablo_03.jpg)
Yeah i was referring to the number row. The zero looks rather jarring when put next to the other Roman numeral keys.Just stumbled into this thread. Wow, PBT? I’m in.It does go with the theme, it's the button that closes out menus in Diablo 2.
But, looking at this render: The 0 (zero) looks so out of place. Did nobody consider using the Omega Ω sign for that?
Roman numerals don’t have zero anyway, why not go with something a bit cooler and still fits the theme?Show Image(https://cdn.shopify.com/s/files/1/1679/2319/products/Sancturay-home-page_2048x.png?v=1555101079)
EDIT: Realized you might be talking about 0 and not the esc key whoops. Still, in this image you can see that's what the 0 looks like in the game.Show Image(http://majorslack.com/pics/screenshots/diablo_03.jpg)
ne FXIII for jane v2 ce owners avail :eyes:
Jane V2 CE has a key between F12 and printscreen. FXIII -> F13ne FXIII for jane v2 ce owners avail :eyes:
can i get a translation on this
Jane V2 CE has a key between F12 and printscreen. FXIII -> F13ne FXIII for jane v2 ce owners avail :eyes:
can i get a translation on this
ne FXIII for jane v2 ce owners avail :eyes:artisans kapap
hullo.hullo how are you, any updates? :cool:
hullo.hullo how are you, any updates? :cool:
hullo.hullo how are you, any updates? :cool:
the new factory can't cater ergodox and 40s. sigh.
Wow! Thats great. Sad though for ergo and 40s userhullo.hullo how are you, any updates? :cool:
yeah, please re-read my first and second post!
GB very soon, but they changed the base kit because the new factory can't cater ergodox and 40s. sigh.
we're very annoyed as well (as Jebbra is one of those 40s user as well) but we can't do anything about it.
fortunately it's TKC (not me) who's organizing this GB, so i hope they have a better communication than me!
(you could always see me ****posting at reddit discord, but still...)
Very sad to see all the kits gone, and instead just one big base kit. I'll still be grabbing two though!
Really hope the set doesn't cost like, $200 because of the gigantic base kit... :confused:
BUT we will see, and this is still my most anticipated set ever ;D
Regarding the color, I got into a conversation with TKC on Reddit and he said thisReally hope the set doesn't cost like, $200 because of the gigantic base kit... :confused:
BUT we will see, and this is still my most anticipated set ever ;D
It's from the same factory of the sets, such as Matcha set in the following GB:
https://geekhack.org/index.php?topic=99233.0
I hope they can have reasonable and competitive pricing like the Matcha set ($60-$90 whole set).
A few things that concerns me:
- TKC first reverse-dyesub GB is not yet completed. We have yet to see the quality of the reverse-dyesub and if how bad is the common issue of warping long PBT keys such as spacebar and long shifts. Recent ePBT GBs have shrinkage in some spacebars leading reduced distance between stab insert points - not fixible like warping, and leading to forever-rattle-ish spacebars despite correctly lubed. Really want to read a few reviews on caps of this factory first.
- There is no sample of correct red color yet, and the one in pictures was pinkish red. It's a total deal breaker if they don't get the colors right.
- To what extend the reduction in its support of other layout is going to happen...
Regarding the color, I got into a conversation with TKC on Reddit and he said thisReally hope the set doesn't cost like, $200 because of the gigantic base kit... :confused:
BUT we will see, and this is still my most anticipated set ever ;D
It's from the same factory of the sets, such as Matcha set in the following GB:
https://geekhack.org/index.php?topic=99233.0
I hope they can have reasonable and competitive pricing like the Matcha set ($60-$90 whole set).
A few things that concerns me:
- TKC first reverse-dyesub GB is not yet completed. We have yet to see the quality of the reverse-dyesub and if how bad is the common issue of warping long PBT keys such as spacebar and long shifts. Recent ePBT GBs have shrinkage in some spacebars leading reduced distance between stab insert points - not fixible like warping, and leading to forever-rattle-ish spacebars despite correctly lubed. Really want to read a few reviews on caps of this factory first.
- There is no sample of correct red color yet, and the one in pictures was pinkish red. It's a total deal breaker if they don't get the colors right.
- To what extend the reduction in its support of other layout is going to happen...Show Image(https://i.imgur.com/JAlz9zb.png)
the new factory can't cater ergodox and 40s. sigh.
:(
Deceased support for Colemak... I'm out
the new factory can't cater ergodox and 40s. sigh.
:(Deceased support for Colemak... I'm out
These are two of the most critical things for me. As someone who doesn't primarily use Qwerty, I'm basically done purchasing any keysets which don't offer support for alternate layouts. Same with Ergo/Ortho kits - not sure why in 2019 people are still investing in row-staggered designs, but I will not be one of them.
the new factory can't cater ergodox and 40s. sigh.
:(Deceased support for Colemak... I'm out
These are two of the most critical things for me. As someone who doesn't primarily use Qwerty, I'm basically done purchasing any keysets which don't offer support for alternate layouts. Same with Ergo/Ortho kits - not sure why in 2019 people are still investing in row-staggered designs, but I will not be one of them.
These are two of the most critical things for me. As someone who doesn't primarily use Qwerty, I'm basically done purchasing any keysets which don't offer support for alternate layouts. Same with Ergo/Ortho kits - not sure why in 2019 people are still investing in row-staggered designs, but I will not be one of them.
.
Or do you just want "proper legends" so you can continue to show off your colemak caps and pretend to be better than everyone else that uses an outdated, ridiculous method like staggered qwerty?
Unfortunately I'm out too, staggered layouts are outdated.
.
Or do you just want "proper legends" so you can continue to show off your colemak caps and pretend to be better than everyone else that uses an outdated, ridiculous method like staggered qwerty?
Yes, this. Unironically.
Can we move away from ****ting on one another please? Some people dislike the change for obvious reasons and voice their opinion and suddenly there's a whole crusade calling people that disagree "entitled", "elitist" and other stupid stuff. The set changed, some people are okay with it, some are not, so let's just move on and stop hating each other in our very niche hobby...And here comes the rational centrists with their attempt to TLDR everything incorrectly to give the yelling mob a nicer image.
I think people have a right to be disappointed, we've been following this IC for years, building a set of kits we really liked, then overnight everything changed. It's a bit crap, and people have the right to express their disappointment.This is precisely how I feel as a colemak user. I don't expect every keyset GB organizer to cater to my niche needs. In fact, I expect the opposite. I check most GMK sets to see if they plan on supporting it. 99% of the time they don't, and that's fine and I leave it alone. The annoying thing is that this IC has been going on for a long time with colemak support being offered day1, having me patiently follow it for so long just to drop it. I don't think people should aggressively express anger or anything, but when that happens you can expect vocal disappointment. Maybe future organizers will see all these people upset and learn from it.
If you're still going to buy the set, great. Don't **** on everyone else because they've lost all the compatibility they wanted.
And here comes the rational centrists with their attempt to TLDR everything incorrectly to give the yelling mob a nicer image.What exactly gives the people in this thread the image of a yelling mob? Most people have remained civil in this, there's no reason to label people. There are some bummed out people and it's fair for them to have been excited, it's not often a cool keycap set comes with so much esoteric layout support. Glad you're getting what you want but you don't have to attack people.
But meh, what do I care? I’m getting what I want. The salty people who can’t accept reality will move on eventually.
OP's ergo & ortho kit designs were siiiiiiiiiiick. Those would have been the coolest legends *ever* to have hit reverse-dyesub PBT, and it only would have been possible with the Sanctuary Rebirth theme. It was perfectionI totally agree. The legends are so awesome. Fingers crossed for ergo support in round 3.
I think people have a right to be disappointed, we've been following this IC for years, building a set of kits we really liked, then overnight everything changed. It's a bit crap, and people have the right to express their disappointment.This is precisely how I feel as a colemak user. I don't expect every keyset GB organizer to cater to my niche needs. In fact, I expect the opposite. I check most GMK sets to see if they plan on supporting it. 99% of the time they don't, and that's fine and I leave it alone. The annoying thing is that this IC has been going on for a long time with colemak support being offered day1, having me patiently follow it for so long just to drop it. I don't think people should aggressively express anger or anything, but when that happens you can expect vocal disappointment. Maybe future organizers will see all these people upset and learn from it.
If you're still going to buy the set, great. Don't **** on everyone else because they've lost all the compatibility they wanted.
It's not the OP wanting to drop it, it's that they had to switch factories from the inception of this IC to now. It's unfortunate for sure, but it is what it is. I totally get wanting that kit compatibility and wanting more sets to support it, but the fact is that very few people use it and many alt kits fail to hit MOQ..
Or do you just want "proper legends" so you can continue to show off your colemak caps and pretend to be better than everyone else that uses an outdated, ridiculous method like staggered qwerty?
Yes, this. Unironically. For me it's actually Dvorak, but it's all the same for most folks reading. FWIW I type fine on inexpensive blanks, because that's how I started out, but when I spend hundreds of dollars on keycaps, those keycaps had better reflect something important about me. Something that's Qwerty-only is not worth it to me. Sure, a standard ANSI-layout Qwerty board has it's uses, but about 9 out of 10 of the ICs here for Cherry-profile keycaps are *only* for that.
Somewhere along the way, somebody said those kits should be nixed and that it wouldn't be a problem because not enough people care about those kits, but it is a problem, and me being quiet about it would be too convenient for them. Now that the ergo/ortho/colevrak kits are out of the picture, I am too, and I just want the reason why to be clear.
OP's ergo & ortho kit designs were siiiiiiiiiiick. Those would have been the coolest legends *ever* to have hit reverse-dyesub PBT, and it only would have been possible with the Sanctuary Rebirth theme. It was perfection, and now it ain't happening. Have you seen the "Planck compatibility" of the standard TKC reverse dyesub keysets? They all assume you piece it together from keycaps from the main fullsize-board kit. The best you can do is the standard Planck layout, which isn't even a popular Planck layout, if you look at how it differs from the vast majority of what other users have in the main QMK planck/keymaps/ folder. Psuedo-blanks are waaaaaaaaaaay better and that's one of the great things Sanctuary Rebirth had going for it.
Sent from my LG-H918 using Tapatalk
i'm very sorry. i tried to cater us all, but as you can see, this is not a good situation for us, but i don't have much choice. it's either this or not at all.
Have you considered running this with other company than TKC then? There are more manufacturers that can do 5-sided dyesub, Keyreative springs to mind as the first choice
Have you considered running this with other company than TKC then? There are more manufacturers that can do 5-sided dyesub, Keyreative springs to mind as the first choice
This was meant to be a Keyreative set at the start but they just basically ghosted after a while so I assume they're still not interested.
any way this will go to GB stage?
in may to be exact, so hopefully they can come through
any way this will go to GB stage?
Should be, it says coming "soon" on TKC's website.
I am calling it now, bet this set gets canceled cause of all the crying over sets that wouldn't hit MOQ anyway. Cause people are not willing to put there money were there mouth is. Want proof over half the GMK sets that never hit MOQ on child kits. Yet there massive crying about how people need kit XYZ and can't live with out it.
I am calling it now, bet this set gets canceled cause of all the crying over sets that wouldn't hit MOQ anyway. Cause people are not willing to put there money were there mouth is. Want proof over half the GMK sets that never hit MOQ on child kits. Yet there massive crying about how people need kit XYZ and can't live with out it.40s/Ortho/ergo, numpad and novelty kits hit MOQ regularly. That said ergodox kits are have some success, and colevrak and norde really struggle.
I am calling it now, bet this set gets canceled cause of all the crying over sets that wouldn't hit MOQ anyway. Cause people are not willing to put there money were there mouth is. Want proof over half the GMK sets that never hit MOQ on child kits. Yet there massive crying about how people need kit XYZ and can't live with out it.And I still think that what we’ve been seeing here is just a vocal minority.
Sure, the risk of angering Blizzard is there, but imagine if the gamer crowd - with their CoolerMasters and Razers - get wind of this kit... Hell.
Show Image(https://66.media.tumblr.com/tumblr_m8tov4a5901qjvkxgo1_r1_400.jpg)
Show Image(https://66.media.tumblr.com/tumblr_m8tov4a5901qjvkxgo1_r1_400.jpg)
Having been away from the community since last year and being an initial supporter of this IC, it's definitely disappointing that most of the kits won't be available. At the risk of being called a "crybaby", I will be dropping my support. I primarily wanted this keyset for one very specific keyboard which already had a Diablo-esque look to it, but it has a non-standard layout and macro keys which would be left on ABS while the rest of the keys would be PBT. In any case, I don't have that keyboard anymore (it was vandalized) and I'm not planning on getting a replacement anytime soon so it is what it is.Wait, so even IF this set had all the kits you need, you still WOULD NOT buy it because you no longer have that one specific keyboard.
It’s an IC. Things change. Not everyone can be satisfied. Look at the IC for GMK Oblivion R2, see how much it had since changed now that the GB is live. Many still aren’t happy, but the majority are.
What you are asking for is infinitely postponing this GB until maybe a factory can probably do all-over dye-sub for all the kits. But when is that? 3 years? 5?
Look at how EnjoyPBT can’t do full 40% kits or perfect spacebars yet, but they still charged ahead with amazing sets like 9009, KuroShiro, 2048 ,... to great acclaims and amounts of buyers.
The current base kit can fit a majority of keyboards these days (100% to 60%). That’s more than enough to warrant a GB.
changed the base kit because the new factory can't cater ergodox and 40s. sigh.
we're very annoyed as well (as Jebbra is one of those 40s user as well) but we can't do anything about it.
In case people are worried there was production problems with the other PBT sets TKC is running.
Me too, I havent been on discord lately and was wondering about this. any reason? qc issues with dyesub ?
No quality issues. Logistics. Took almost 6 weeks to get payment to the factory because the transfer kept bouncing back. In the meantime they got some large orders. Been a pain in my butt! Sorry for the delays and lack of updates here. All updates are always available on our Discord server. (https://discord.gg/Vg5FSw)
Wait, so even IF this set had all the kits you need, you still WOULD NOT buy it because you no longer have that one specific keyboard.
And yet you still feel the need to proclaim how you are "dropping my support"?
That's not being a "crybaby". That's being a waste of time reading your post.
Your support for this set vanished the moment you lost that keyboard, not when you learned what kits this set has.
Wait, so even IF this set had all the kits you need, you still WOULD NOT buy it because you no longer have that one specific keyboard.
And yet you still feel the need to proclaim how you are "dropping my support"?
That's not being a "crybaby". That's being a waste of time reading your post.
Your support for this set vanished the moment you lost that keyboard, not when you learned what kits this set has.
So you are going to reject my post on the basis of not having the original keyboard anymore? This IC has been dragging for quite some time now and I told myself that I would replace that keyboard once this set went to GB phase - but it now doesn't have the kits I need and therefore I have no intention of getting that keyboard (at least for now). I could complain about how this or that happened but ultimately it doesn't suit my needs anymore - so I'm dropping my support.
GB when? I need this in my life.May.
GB when? I need this in my life.May.
GB when?
any update?
any update?
From TKC's Discord channel :Show Image(https://i.imgur.com/viA0EvV.png)
any update?
From TKC's Discord channel :Show Image(https://i.imgur.com/viA0EvV.png)
Smart indeed!
I ordered the PBT Katakana too by the way.
any update?
From TKC's Discord channel :Show Image(https://i.imgur.com/viA0EvV.png)
Smart indeed!
I ordered the PBT Katakana too by the way.
Will be relying on you to post pix and showcasing the quality :eyes:
Also, I'm pretty sure this page (https://jebbra.net) by Jebbra (OP) is also new:
The post you made just come off as rambling and whining. The entire group buy becomes mute once you sold the board you planned to use. Then this most recent post makes less since. "I planned to sell the board once the group buy started", what the heck? I guess what the poster was trying to point out was your not making since.
As far as the buy goes, I am still massively excited.
You've clearly expressed that you're not interested in this set anymore.The post you made just come off as rambling and whining. The entire group buy becomes mute once you sold the board you planned to use. Then this most recent post makes less since. "I planned to sell the board once the group buy started", what the heck? I guess what the poster was trying to point out was your not making since.
As far as the buy goes, I am still massively excited.
Please show me where I stated I sold the board and additionally where I said I planned to sell it once the GB started? The keyboard was damaged and I planned to buy a new one specifically for this buy. Since this buy no longer fits my needs, I will not be buying that board. I don't know how to make myself any more clear?
How many keys need to be produced to support ISO and Planck?Re. ISO:
ISO: ISO Enter and the 1.25u Shift
Planck: 1u Shift, 1u Enter, and Upper layer and Lower layer
If the vendor can accommodate a few more, it will be historical and less like just a re-make of previous.
How many keys need to be produced to support ISO and Planck?Re. ISO:
ISO: ISO Enter and the 1.25u Shift
Planck: 1u Shift, 1u Enter, and Upper layer and Lower layer
If the vendor can accommodate a few more, it will be historical and less like just a re-make of previous.
Look at it this way, GMK Oblivion R2 is one of the most hyped GBs this year, right?
It has 4 (!) base kits, and as of 13/6, 1.234 base kits have been sold in total.
The International kit? 48 so far. 3.89%.
Even if you don't count the Assembly base kit, that is still 48 out of 1.126, or 4.27%.
In production, we call this "Not worth turning the machine on for".
Btu hey, at least you're not having it as bad as the Colevrak crowd ¯\_(ツ)_/¯Show Image(https://massdrop-s3.imgix.net/img_comment/6gz0ma8qSZGi7vn5tBhx_GMKoblivionV2status1906131130.PNG?auto=format&fm=jpg&fit=max&w=796&h=425&dpr=1)
And even if all that would not have been the case, the comparision is still quite crappy. We are not talking about the rerun odf the 100st GB of an ordinary GMK kit (don't get me wrong here - Oblivion is fantastic, and I love all the work of the designers, but in the end it is just another GMK set), we are talking D2! We are talking reverse Dye-Sub! We are talking PBT! Just an example: I will not buy another GMK-Set via a MD-GB, too expensive, I have enough of them. But I would have bought this one without even checking the price. Heck, I even asked for the "Black" Runeword in german fashion, I would have bought like very Kit there was from this set. This is just not comparable with anything that have been done before.
1) Oblivion includes base ISO keycap compatibility in the base kits, international is only for correct legends for select countries
2) international is prohibitively expensive, 85$ for a few cherrypicked keys per buyer is a tough ask
3) you're making no sense, comparing apples with pears, the guy asked for 4 keys added to the base, not AZERTY Colemak
Now please **** off and stop ****ting on anything that's not American for no reason.
Now please **** off and stop ****ting on anything that's not American for no reason.Yeah I was wrong about GMK Oblivion's ISO support. My bad.
But come on now, you do realize the rest of the world and not just America also uses ANSI, right?No we do not. Outside of US, Thailand, and Nigeria, ISO is prevalent, with JIS for Japan (which uses a similar enter key and a weird short space bar). Even UK uses ISO...
I can’t tell if you were being /s but forgot to type /s.QuoteBut come on now, you do realize the rest of the world and not just America also uses ANSI, right?No we do not. Outside of US, Thailand, and Nigeria, ISO is prevalent, with JIS for Japan (which uses a similar enter key and a weird short space bar). Even UK uses ISO...
Now please **** off and stop ****ting on anything that's not American for no reason.Yeah I was wrong about GMK Oblivion's ISO support. My bad.
But come on now, you do realize the rest of the world and not just America also uses ANSI, right?
I'm into this set simply because I love the colorway and legends.
(I don't even care about Diablo. Not into video games)
But it seems that you guys have a lot of other axes to grind here. So I'll leave you guys to it.
I may have written that before having my morning coffee and got a bit carried away, sorry about that. But to be honest I can't think of a single country that has ANSI as a default outside of USA. And if we're being pedantic, both ANSI and ISO standards actually allow for both enter keys to be used ;)
Spokeperson from TKC just replied me. they are going to start the GB after they have received katakana.
But to be honest I can't think of a single country that has ANSI as a default outside of USA.The entirety of Asia (sans Japan)?
*cries in Colemak
ISO support. If vendor can add it at small cost why not. If not, bye bye.
ISO support. If vendor can add it at small cost why not. If not, bye bye.
Bye unless your willing to eat the cost for us Ansi users. I would say we far far out weight you ISO users most likely 30-1 if I had to guess, Perhaps more.
Bye unless your willing to eat the cost for us Ansi users. I would say we far far out weight you ISO users most likely 30-1 if I had to guess, Perhaps more.Because of the gatekeeping that occurs around here and in the custom keeb community at large. Most people i know can largely afford a custom or a few, and custom keycaps of course, but are just not interested due to their perception of it being USA-centric and with zero possibility of getting ISO layouts. It's an endless circle that is perpetuated by people like you.
>USA-centricBye unless your willing to eat the cost for us Ansi users. I would say we far far out weight you ISO users most likely 30-1 if I had to guess, Perhaps more.Because of the gatekeeping that occurs around here and in the custom keeb community at large. Most people i know can largely afford a custom or a few, and custom keycaps of course, but are just not interested due to their perception of it being USA-centric and with zero possibility of getting ISO layouts. It's an endless circle that is perpetuated by people like you.
Because of the gatekeeping that occurs around here and in the custom keeb community at large. Most people i know can largely afford a custom or a few, and custom keycaps of course, but are just not interested due to their perception of it being USA-centric and with zero possibility of getting ISO layouts. It's an endless circle that is perpetuated by people like you.
Because of the gatekeeping that occurs around here and in the custom keeb community at large. Most people i know can largely afford a custom or a few, and custom keycaps of course, but are just not interested due to their perception of it being USA-centric and with zero possibility of getting ISO layouts. It's an endless circle that is perpetuated by people like you.
To be honest if people really are serious about custom keyboards they should have no issue having their customs be built as ANSI. It's really not hard, anyone with a programmable keyboard can do it if they just give it a shot, it's not like you need to be some sort of savant; ISO should only ever be an aesthetic concern, if for no other reason than to save like 50 bucks or more every time a new set comes along. It's not really about "if you can't beat them join them", although realistically that's kinda the way it is/will be, it's more about just adapting if you really want to be a part of this whole thing.
Of course people could have no issue building an ANSI board. But since it's custom, what's the point of making something custom that doesn't fit you? It's definitely not just "an aesthetic concern", it's usability - if someone is used to hitting their tall Enter for years, why should they suddenly relearn that for no benefit?
Also, you realize ISO has one more key, right? That key is kinda important for keymaps in languages other than English, and having it on a layer is very annoying.
So please stop talking like everyone should use ANSI or get out, because it's nonsense and you're dismissing tons of people only on the basis of "what I use is widespread here so everyone else can suck it". Do you apply that logic to other board sizes than you use, to ortho, splits, different USB ports, ...?
I don't get it. People are fine with having their WKL and HHKB and 65% and whatever other layouts that aren't default, but as soon as someone mentions ISO, people go crazy?
I don't get it. People are fine with having their WKL and HHKB and 65% and whatever other layouts that aren't default, but as soon as someone mentions ISO, people go crazy?Some, including me, are annoyed because once OP said the factory doesn't have the mold for ISO keys, the ISO people flipped out and demanded this GB being postponed indefinitely until OP can find another factory who can do all--over dye-sub with ISO and non-ortho 40% kits.
Well it does seem like a *lot* of compromises are being made in this set just for the factory - at what point do you stop and say okay I'm not willing to compromise on almost-everything-except-standard-ANSI, time to find a new factory?From what I gather, and the amount of time this set has been in IC, there is literally NO other option to get this set made without sacrificing design integrity. I'd much rather some compatibility be sacrificed rather than deterring from the original vision for the set.
Well it does seem like a *lot* of compromises are being made in this set just for the factory - at what point do you stop and say okay I'm not willing to compromise on almost-everything-except-standard-ANSI, time to find a new factory?From what I gather, and the amount of time this set has been in IC, there is literally NO other option to get this set made without sacrificing design integrity. I'd much rather some compatibility be sacrificed rather than deterring from the original vision for the set.
This set can still be used in plenty of layouts, this thread is getting ridiculous.
Well it does seem like a *lot* of compromises are being made in this set just for the factory - at what point do you stop and say okay I'm not willing to compromise on almost-everything-except-standard-ANSI, time to find a new factory?
Well it does seem like a *lot* of compromises are being made in this set just for the factory - at what point do you stop and say okay I'm not willing to compromise on almost-everything-except-standard-ANSI, time to find a new factory?
There is a very small minority of companies that can do 5-side dyesub as I can recall. Not many companies out there have the proper tooling to run such a set. The original factory the GB runner wanted, Keyreative, essentially ghosted him. TKC was our 2nd choice, and thus we had to make sacrifices as TKC doesn't have 100% of the tooling available.
If you know of any manufacturers that have a good reputation and QC, then maybe suggest them to the GB runner. I am sure he is doing his best given his options, even the OG designer got shafted on kits HE was personally invested in, which is a major disappointment if I do say so myself.
Do you understand how unbelievably expensive it would be to get these legends done in doubleshot? The set literally needs to be dye-sub.Well it does seem like a *lot* of compromises are being made in this set just for the factory - at what point do you stop and say okay I'm not willing to compromise on almost-everything-except-standard-ANSI, time to find a new factory?
There is a very small minority of companies that can do 5-side dyesub as I can recall. Not many companies out there have the proper tooling to run such a set. The original factory the GB runner wanted, Keyreative, essentially ghosted him. TKC was our 2nd choice, and thus we had to make sacrifices as TKC doesn't have 100% of the tooling available.
If you know of any manufacturers that have a good reputation and QC, then maybe suggest them to the GB runner. I am sure he is doing his best given his options, even the OG designer got shafted on kits HE was personally invested in, which is a major disappointment if I do say so myself.
So maybe don't do 5-sided dyesub, maybe go back to somewhere like SP and do doubleshot. I'm sure he is doing everything he can yes, but with every change he makes, he makes more people unhappy that have been following this set for years.
I'm sure it'll be a success anyway, for some definition of success, when it finally does run.
Well it does seem like a *lot* of compromises are being made in this set just for the factory - at what point do you stop and say okay I'm not willing to compromise on almost-everything-except-standard-ANSI, time to find a new factory?
They already exist in doubleshot, from the original DCS Sanctuary run. Not all of them, but most of them.
They already exist in doubleshot, from the original DCS Sanctuary run. Not all of them, but most of them.
look at those kits they had zero support and fun fact SP who you said they should run it thought doesn't do ISO either... yep! Instead of complaining so much about this set go create your won and find someone willing to create it. Then go find 150-300 people to buy it.. Why not go ahead and include only ISO support you know. I mean seriously this is stupid at this point don't like the set move on. Unless your just a internet troll looking to cause Drama. I don't see people with Topre coming into the thread complaining about lack of Topre support. Want to have a non standard layout deal with not always getting the keys you need/want.
the problem is that the factory we are working with didn't have the capability to make the ISO kit....
they don't have the ISO mold.
no mold, no keys.Show Image(https://i.kym-cdn.com/photos/images/newsfeed/000/688/819/43b.jpg)
They don't in SA profile but do in DSA and DCS... either way it is what it is .. and yes ISO is a non standard layout when most the world and yes its MOST the world uses Ansi. ISO is a more standard layout then most but its still not what the majority of people use. Once again you completely ignored everything else I said which is still very much valid which tells me. That your only argument was pretty thin to start with.They already exist in doubleshot, from the original DCS Sanctuary run. Not all of them, but most of them.
look at those kits they had zero support and fun fact SP who you said they should run it thought doesn't do ISO either... yep! Instead of complaining so much about this set go create your won and find someone willing to create it. Then go find 150-300 people to buy it.. Why not go ahead and include only ISO support you know. I mean seriously this is stupid at this point don't like the set move on. Unless your just a internet troll looking to cause Drama. I don't see people with Topre coming into the thread complaining about lack of Topre support. Want to have a non standard layout deal with not always getting the keys you need/want.
What on earth, ISO isn't a "non-standard layout". And SP does do ISO kits.
They don't in SA profile but do in DSA and DCS... either way it is what it is .. and yes ISO is a non standard layout when most the world and yes its MOST the world uses Ansi. ISO is a more standard layout then most but its still not what the majority of people use. Once again you completely ignored everything else I said which is still very much valid which tells me. That your only argument was pretty thin to start with.They already exist in doubleshot, from the original DCS Sanctuary run. Not all of them, but most of them.
look at those kits they had zero support and fun fact SP who you said they should run it thought doesn't do ISO either... yep! Instead of complaining so much about this set go create your won and find someone willing to create it. Then go find 150-300 people to buy it.. Why not go ahead and include only ISO support you know. I mean seriously this is stupid at this point don't like the set move on. Unless your just a internet troll looking to cause Drama. I don't see people with Topre coming into the thread complaining about lack of Topre support. Want to have a non standard layout deal with not always getting the keys you need/want.
What on earth, ISO isn't a "non-standard layout". And SP does do ISO kits.
yes ISO is a non standard layout when most the world and yes its MOST the world uses Ansi.No.
Is it possible to take these arguments to PM? There is literally no value to them as the GB organizer has already stated that the manufacturer he has chosen doesn't have the molds for ISO layout.
If you guys want to suggest changing manufacturers, however, feel free to shoot the idea and hope for a response.
But please, for the love of kbs, take these arguments off the thread,
Thank you.
yes ISO is a non standard layout when most the world and yes its MOST the world uses Ansi.No.
ISO literally means it's an international standard.
Again, all of Europe uses ISO and that's a substantial part of the world.
Japan uses a further variation of it.
China and Russia use BAEK or ISO depending on where you are and how recent it is (i have worked on chinese Dell keebs that still use the BAEK)
Literally 3 countries use ANSI. There goes your "most of the world" which probably means "USA is most of the world"...
As for this kit, we'll give it a pass but if there's a 2nd run with more support for different layouts, it will certainly meet some success.
yes ISO is a non standard layout when most the world and yes its MOST the world uses Ansi.No.
ISO literally means it's an international standard.
Again, all of Europe uses ISO and that's a substantial part of the world.
Japan uses a further variation of it.
China and Russia use BAEK or ISO depending on where you are and how recent it is (i have worked on chinese Dell keebs that still use the BAEK)
Literally 3 countries use ANSI. There goes your "most of the world" which probably means "USA is most of the world"...
As for this kit, we'll give it a pass but if there's a 2nd run with more support for different layouts, it will certainly meet some success.
Even if that were true, its all completely irrelevant. This is a custom keyset designed primarily for custom keyboards. As a matter of fact iso barely exists in this hobby, and is very much a non-standard layout, whether you like it or not.
In any case, if you are going to give this set a pass, please pass by this thread in the future as well, as per the forum rules. Or stay and continue to reinforce the entitled reputation that whiny iso users are known for, and risk suspension/banning, I guess.
As far as the set is concerned, it looks great. I wish more sets were designed this way. Looking forward to it. Has anything about pricing been released yet?
yes ISO is a non standard layout when most the world and yes its MOST the world uses Ansi.No.
ISO literally means it's an international standard.
Again, all of Europe uses ISO and that's a substantial part of the world.
Japan uses a further variation of it.
China and Russia use BAEK or ISO depending on where you are and how recent it is (i have worked on chinese Dell keebs that still use the BAEK)
Literally 3 countries use ANSI. There goes your "most of the world" which probably means "USA is most of the world"...
As for this kit, we'll give it a pass but if there's a 2nd run with more support for different layouts, it will certainly meet some success.
Even if that were true, its all completely irrelevant. This is a custom keyset designed primarily for custom keyboards. As a matter of fact iso barely exists in this hobby, and is very much a non-standard layout, whether you like it or not.
In any case, if you are going to give this set a pass, please pass by this thread in the future as well, as per the forum rules. Or stay and continue to reinforce the entitled reputation that whiny iso users are known for, and risk suspension/banning, I guess.
As far as the set is concerned, it looks great. I wish more sets were designed this way. Looking forward to it. Has anything about pricing been released yet?
Along time ago someone mentioned it follow the same pricing as DSA Drifter, but honestly that was a LONG time ago and just a rumor. I wouldn't expect it to be as expensive as GMK but I wouldn't expect to to be more then GMK if that helps at all.
I’ve never been so disappointed. Diablo 2 was the best video game I ever played. And I wanted this set so bad and it was looking good. ...... how I felt after the first day of playing Diablo 3. Biggest disappointment of my life.
I’ve never been so disappointed. Diablo 2 was the best video game I ever played. And I wanted this set so bad and it was looking good. ...... how I felt after the first day of playing Diablo 3. Biggest disappointment of my life.
You like many who follow from Diablo I to II to expansion, can feel the difference in art work, style of game, music, atmosphere - everything. Blizzard North was the genius team that created everything for Diablo I and II, and Blizzard ended up making the decision of dismissing the team, and starting from sketch with a whole new totally different team, despite Blizzard North started developing Diablo III already. Ended up they created something to match the WoW and LoL kind of thing but totally lost their own signature soul.
I know how you felt...
Good job on leaving out the 1u shift key. I literally hate ortho users too.
This community sure is something lmao
Well this set has been in IC for... two years now? And we've not been able to give any meaningful input on the current one-kit proposal. I can see why they feel slighted.>slighted
Good job on leaving out the 1u shift key. I literally hate ortho users too.There are 16 1.0u R4 keys. More than enough for a grid ortho if you don’t mind incorrect legends.
An IC does not guarantee that OP has to take your inputs into consideration.
The purpose of an IC is literally in its name: Making sure there is enough interest to make it worthwhile to produce something in a bigger scale.An IC does not guarantee that OP has to take your inputs into consideration.
That's true. But that also entirely defeats the purpose of an IC.
An IC does not guarantee that OP has to take your inputs into consideration.
That's true. But that also entirely defeats the purpose of an IC.
Such a good set with potential completely ruined. This still saddens me that someone had to destroy diablo 2 for everyone. I bet he was a duping hacker back in 2003
I don't think anyone was being disrespectful. This IC has gone on forever and started with a bunch of layout support. That support has steadily declined. Criticism isn't toxic. Voicing disappointment isn't toxic. You are seeing criticism in this thread because every compatibility kit under the sun was offered at some point during this long IC. Other IC's typically don't offer kits at all, do so with MOQs, or only make minor adjustments to compatibility. If anything, I think this IC and all of the comments in it are one of the most valuable on GH. The amount of back and forth and opinion sharing and shaming shows exactly what happens when a very long IC for a hype set of keys loses a lot of compatibility.An IC does not guarantee that OP has to take your inputs into consideration.
That's true. But that also entirely defeats the purpose of an IC.
(not entirely directed at you, just as a more general statement)
The point of an IC is to determine interest in a product, it is literally impossible to please everyone who has interest. Changes to a product are at the discretion of the creator/designer, and technically an IC has no requirement to take input into consideration.
No one is slighted in the creation of a product unless that is specifically stated as a point by which the creator/designer set out to create something. Saying some minority group was slighted due to the removal or lack of a cap, is false and an unnecessary statement. Feeling like everything should bend to the will of the vocal minority is ignorant. (not arguing about what is and isn't a minority group, that argument is only toxic as shown in many threads recently)
If you feel a product doesn't support what you wish, move on with your life. Lambasting someone because they didn't support your specific need is uncalled for, and down right toxic to the community.
Sometimes there are reasons beyond your knowledge that cause decisions, such as layout support, to be made even if they will exclude a group due to said decision. If you are not privy to this knowledge or actual reasoning, first think logically and either decide to walk away or politely ask for reasoning, if they can't give you an answer to your liking (even if logical, just not want you wanted to hear), walk away rather than going after them to change their mind (one of the least effective methods to get someone to change their mind as it is more likely to make them not want to even more).
The creator/designer of this set has made decisions on the support, it may not be inclusive to all possible layouts but that is literally impossible to achieve and it may be unfortunate for those left out, but respect the creators/designers decisions even if they don't agree with you. If you still wish to not show respect, you may leave as you are only being toxic and are not being constructive to this community or this product.
SO on that note, this is an IC not a battleground where you wish to express your disdain for the lack of support for your layout (even if it is a standard...that is a subset of another standard), if you are not interested, leave and live a happier life rather than arguing. I want to see this community have fun and grow, not be up in arms over something that is honestly not worth the time spent typing or thinking. Enjoy the hobby, as hobbies are for fun, not for stress.
...
I don't think anyone was being disrespectful. This IC has gone on forever and started with a bunch of layout support. That support has steadily declined. Criticism isn't toxic. Voicing disappointment isn't toxic. You are seeing criticism in this thread because every compatibility kit under the sun was offered at some point during this long IC. Other IC's typically don't offer kits at all, do so with MOQs, or only make minor adjustments to compatibility. If anything, I think this IC and all of the comments in it are one of the most valuable on GH. The amount of back and forth and opinion sharing and shaming shows exactly what happens when a very long IC for a hype set of keys loses a lot of compatibility.
GB very soon, but they changed the base kit because the new factory can't cater ergodox and 40s. sigh.
we're very annoyed as well (as Jebbra is one of those 40s user as well) but we can't do anything about it.
fortunately it's TKC (not me) who's organizing this GB, so i hope they have a better communication than me!
...
I don't think anyone was being disrespectful. This IC has gone on forever and started with a bunch of layout support. That support has steadily declined. Criticism isn't toxic. Voicing disappointment isn't toxic. You are seeing criticism in this thread because every compatibility kit under the sun was offered at some point during this long IC. Other IC's typically don't offer kits at all, do so with MOQs, or only make minor adjustments to compatibility. If anything, I think this IC and all of the comments in it are one of the most valuable on GH. The amount of back and forth and opinion sharing and shaming shows exactly what happens when a very long IC for a hype set of keys loses a lot of compatibility.
I really am sick of calling everything on the internet toxic but i don't think it's right to voice dissapointment through passive agressive and whiney "feedback" while the reason has been communicated multiple times and is out of the control of the runner.
May I remind you again how the runner presented the update (highlights are mine):QuoteGB very soon, but they changed the base kit because the new factory can't cater ergodox and 40s. sigh.
we're very annoyed as well (as Jebbra is one of those 40s user as well) but we can't do anything about it.
fortunately it's TKC (not me) who's organizing this GB, so i hope they have a better communication than me!
...
I don't think anyone was being disrespectful. This IC has gone on forever and started with a bunch of layout support. That support has steadily declined. Criticism isn't toxic. Voicing disappointment isn't toxic. You are seeing criticism in this thread because every compatibility kit under the sun was offered at some point during this long IC. Other IC's typically don't offer kits at all, do so with MOQs, or only make minor adjustments to compatibility. If anything, I think this IC and all of the comments in it are one of the most valuable on GH. The amount of back and forth and opinion sharing and shaming shows exactly what happens when a very long IC for a hype set of keys loses a lot of compatibility.
GB very soon, but they changed the base kit because the new factory can't cater ergodox and 40s. sigh.
we're very annoyed as well (as Jebbra is one of those 40s user as well) but we can't do anything about it.
fortunately it's TKC (not me) who's organizing this GB, so i hope they have a better communication than me!
...And then Sanctuary Rebirth starting soon?! 🙏any clue what the date on this is now? seems like its been a week away foreva
Was supposed to be picked up 2 weeks ago. Factory claims they cant figure out how to call UPS and order a pick up. Got my rep to do it, factory labeled the packages wrong. Had to send them back 2x now. Been a pain in my ass. I think we finally got it all sorted now and should have them next week. Been in close contact with UPS rep to make sure we don't get stuck in customs. Hoping this is over soon and we can get these out to everyone.
If we can get the quotes together in time and the marketing materials, yes, would be starting in the next 3-4 weeks.
BoycottStop posting in this thread and go outside. Get an ice cream. Summer is almost over, enjoy it while you can.
Name calling and 'greed' reference aside (not cool mate), I think they make a valid point.
Katakana is shipping!!!! WOOOOOOO
Katakana is shipping!!!! WOOOOOOO
Katakana is shipping!!!! WOOOOOOO
NE upd8 avail
September 20th here we goooo! Already got my artisans for the set ready to roll :thumb:
Will GB start this month or later?
September 20th here we goooo! Already got my artisans for the set ready to roll :thumb:
Will GB start this month or later?
september 20th
Will GB start this month or later?
september 20th
Where was this announced? I see nothing on jebbra's site. Don't see updates in the OP either??
where was september 20 announced? either way, happy to finally see this launched!
Instagram:
(Attachment Link)
Instagram:
(Attachment Link)
I appreciate the time and effort to show me the source! Thank you very much.
Not only do I know that the set is near GB, but it's also going to run for four weeks! This really helps as the BOCC and Timber Wolf will be eating most of my wallet this September :))
Meant to reply back to the folks that were asking about price and how I knew etc. Just couldn't get around to it. The perks of being a new dad :)
I have not seen anything on price personally.
That BOCC kind of snuck up on me, but I also feel like it might be a great board for this key set too. 😁
Kind of mind boggling to me no one from TKC is putting any details, updates, or information anywhere on this gh thread to prepare for the buy.
I'm really excited for it and I know the team is extremely busy and probably stretched thin but I wish they did any kind of communication on geekhack...
2nd. post:
also this is really a bad time for me as i am supposed to be on bed (thypus sucks) and finishing material for bi-yearly shareholder meetings on my company (the cause of my thypus)
but here's the roundabout:
the set is live and is gonna go live on 20th (that's the day after tomorrow, looking at my current time now (GMT+7)
the set is final already, and i forgot if i ever posted the sample pics here? (if not i'm going to post it later or maybe at gb thread)
i guess my job is only to make a gb thread (or maybe tkc alrd made it from me? i must contact em again..)
We're live, booooooyz! :thumb:
https://thekey.company/collections/sanctuary-rebirth (https://thekey.company/collections/sanctuary-rebirth)Show Image(https://thumbs.gfycat.com/SneakyClumsyBluejay-small.gif)
We're live, booooooyz! :thumb:
https://thekey.company/collections/sanctuary-rebirth (https://thekey.company/collections/sanctuary-rebirth)Show Image(https://thumbs.gfycat.com/SneakyClumsyBluejay-small.gif)
yyeeeeeeeeeeesssssssssss!!! :thumb:
but...eh... can't they provide bigger picture for the kit :(
Show Image(https://i.imgur.com/22Sk602.png)
i ordered it!
Show Image(https://i.imgur.com/22Sk602.png)
i ordered it!
Where do you get one of those bad boys?
Show Image(https://i.imgur.com/22Sk602.png)
i ordered it!
Where do you get one of those bad boys?
Korea, Sandon's Artisan.
GB is now, but Korea KBDlab only
We're live, booooooyz! :thumb:
https://thekey.company/collections/sanctuary-rebirth (https://thekey.company/collections/sanctuary-rebirth)Show Image(https://thumbs.gfycat.com/SneakyClumsyBluejay-small.gif)
yyeeeeeeeeeeesssssssssss!!! :thumb:
but...eh... can't they provide bigger picture for the kit :(
+1 for bigger picture.
THough I will say it's a good ****ing problem to have that the main issue with this set is the base kit is so large i need a higher resolution photo to make out what keys are included.
Speaking of base kits, this base kit is absolutely ****ing bonkers. It's like a base kit, 40s kit, novelties, iso, and spacebar all in one. With new molds. With pbt. With reverse dye sub.
If the quality is any good on delivery man oh man am I pumped for the future keysets.
I want to join but wont until I see some sample kit photos. I'm hoping the colors and reverse dye subbing job is good!
sooo candykeys website says UK ISO is included, is that correct? iirc the last official info was that ISO wouldn't be possible?
I second this! Anyone know of a way to get this in the US?Show Image(https://i.imgur.com/22Sk602.png)
i ordered it!
Where do you get one of those bad boys?
Korea, Sandon's Artisan.
GB is now, but Korea KBDlab only
Wait... I need this................ Anybody offering proxy services for that GB?
I second this! Anyone know of a way to get this in the US?Show Image(https://i.imgur.com/22Sk602.png)
i ordered it!
Where do you get one of those bad boys?
Korea, Sandon's Artisan.
GB is now, but Korea KBDlab only
Wait... I need this................ Anybody offering proxy services for that GB?
Sent from my iPhone using Tapatalk
I second this! Anyone know of a way to get this in the US?Show Image(https://i.imgur.com/22Sk602.png)
i ordered it!
Where do you get one of those bad boys?
Korea, Sandon's Artisan.
GB is now, but Korea KBDlab only
Wait... I need this................ Anybody offering proxy services for that GB?
Sent from my iPhone using Tapatalk
TK.C is trying to do a sale for Sandun's keycap. As far as I know, Sandun himself is already interested in doing the sale on TK.C.
Hope it's just a matter of time.
Don't know about the pricing yet tho.
I second this! Anyone know of a way to get this in the US?Show Image(https://i.imgur.com/22Sk602.png)
i ordered it!
Where do you get one of those bad boys?
Korea, Sandon's Artisan.
GB is now, but Korea KBDlab only
Wait... I need this................ Anybody offering proxy services for that GB?
Sent from my iPhone using Tapatalk
TK.C is trying to do a sale for Sandun's keycap. As far as I know, Sandun himself is already interested in doing the sale on TK.C.
Hope it's just a matter of time.
Don't know about the pricing yet tho.
:EYES:
I second this! Anyone know of a way to get this in the US?Show Image(https://i.imgur.com/22Sk602.png)
i ordered it!
Where do you get one of those bad boys?
Korea, Sandon's Artisan.
GB is now, but Korea KBDlab only
Wait... I need this................ Anybody offering proxy services for that GB?
Sent from my iPhone using Tapatalk
TK.C is trying to do a sale for Sandun's keycap. As far as I know, Sandun himself is already interested in doing the sale on TK.C.
Hope it's just a matter of time.
Don't know about the pricing yet tho.
:EYES:
You can purchase from TheKey.company at this link. (https://thekey.company/collections/sanctuary-rebirth) They are located in the US and say they ship to anywhere in the world - see here (https://thekey.company/pages/faq) under "Shipping." There might be other vendors as well, I don't know.
It might help if they closed this [IC] thread and started a [GB] thread with some details.
(Attachment Link)
Wait, hold up. "You are not prepared"? Guys. Wrong Blizzard property. That's not a Diablo line, that's Illidan from Warcraft. :rolleyes: :))
Will there be any way to buy the red split space keys if BRED doesn't hit MOQ?
Are there any pictures of the prototypes running around? I really like the set but I am wary of this reverse dye sub thing.
I guess this GB is live? I saw an ad for it on instagram and it's already half over lol
A high res pic of at least one key would be nice. I know there's another light colored set people reference but the photos are low res. I already have the SP Sanctuary set and for $120 I'd like to know what I am getting.
I guess this GB is live? I saw an ad for it on instagram and it's already half over lolThe prob with making "at leats one key" is that you still have to turn on the machines, which costs money. That's why it makes more sense to manufacture things in big batches: The startup cost is the same.
A high res pic of at least one key would be nice. I know there's another light colored set people reference but the photos are low res. I already have the SP Sanctuary set and for $120 I'd like to know what I am getting.
That's fair - I guess if we just had a good example of what this process looks like... well I guess we will after this set runs :)I guess this GB is live? I saw an ad for it on instagram and it's already half over lolThe prob with making "at leats one key" is that you still have to turn on the machines, which costs money. That's why it makes more sense to manufacture things in big batches: The startup cost is the same.
A high res pic of at least one key would be nice. I know there's another light colored set people reference but the photos are low res. I already have the SP Sanctuary set and for $120 I'd like to know what I am getting.
It's not ideal, I know, but I think the success of the Hiragana GB gave me some confidence in their QC.
I found two repeated exact copies of the 1u 'Fn' keys on the shift row.Show Image(https://i.imgur.com/yiR7fyz.png)
I don't think any layout may use two 'Fn' keys.
Would be nice to have one of these 1u 'Fn' change to 1u 'Shift' or 1u 'Entr' or other 1u keys on different rows, e.g. 1u tab, 1u bksp on the QWERTY row, or even the 1u red ASC and DESC keys in the render.
Please observe these repeated keys.
I found two repeated exact copies of the 1u 'Fn' keys on the shift row.Show Image(https://i.imgur.com/yiR7fyz.png)
I don't think any layout may use two 'Fn' keys.
Would be nice to have one of these 1u 'Fn' change to 1u 'Shift' or 1u 'Entr' or other 1u keys on different rows, e.g. 1u tab, 1u bksp on the QWERTY row, or even the 1u red ASC and DESC keys in the render.
Please observe these repeated keys.
I found two repeated exact copies of the 1u 'Fn' keys on the shift row.Show Image(https://i.imgur.com/yiR7fyz.png)
I don't think any layout may use two 'Fn' keys.
Would be nice to have one of these 1u 'Fn' change to 1u 'Shift' or 1u 'Entr' or other 1u keys on different rows, e.g. 1u tab, 1u bksp on the QWERTY row, or even the 1u red ASC and DESC keys in the render.
Please observe these repeated keys.
GB is already running (ending this Friday actually) and that picture is out of date. Current layout is available on the GB page, or IIRC someone linked if a few posts above...
...
For those searching for a higher resolution pic of the base set:Show Image(https://freight.cargo.site/t/original/i/556c48153e7198b5095de7a298caa0f7cda1071633d5c553779e7bf5fafccb41/Sanctuary_New_Kit--40-01.jpg)
...
I found two repeated exact copies of the 1u 'Fn' keys on the shift row.Show Image(https://i.imgur.com/yiR7fyz.png)
I don't think any layout may use two 'Fn' keys.
Would be nice to have one of these 1u 'Fn' change to 1u 'Shift' or 1u 'Entr' or other 1u keys on different rows, e.g. 1u tab, 1u bksp on the QWERTY row, or even the 1u red ASC and DESC keys in the render.
Please observe these repeated keys.
GB is already running (ending this Friday actually) and that picture is out of date. Current layout is available on the GB page, or IIRC someone linked if a few posts above...
Found it - suggest OP to post that to the top of the thread to make things easier....
For those searching for a higher resolution pic of the base set:Show Image(https://freight.cargo.site/t/original/i/556c48153e7198b5095de7a298caa0f7cda1071633d5c553779e7bf5fafccb41/Sanctuary_New_Kit--40-01.jpg)
...
Still have some interesting redundant keys in this set.
I found two repeated exact copies of the 1u 'Fn' keys on the shift row.Show Image(https://i.imgur.com/yiR7fyz.png)
I don't think any layout may use two 'Fn' keys.
Would be nice to have one of these 1u 'Fn' change to 1u 'Shift' or 1u 'Entr' or other 1u keys on different rows, e.g. 1u tab, 1u bksp on the QWERTY row, or even the 1u red ASC and DESC keys in the render.
Please observe these repeated keys.
GB is already running (ending this Friday actually) and that picture is out of date. Current layout is available on the GB page, or IIRC someone linked if a few posts above...
Found it - suggest OP to post that to the top of the thread to make things easier....
For those searching for a higher resolution pic of the base set:Show Image(https://freight.cargo.site/t/original/i/556c48153e7198b5095de7a298caa0f7cda1071633d5c553779e7bf5fafccb41/Sanctuary_New_Kit--40-01.jpg)
...
Still have some interesting redundant keys in this set.
Wow now, editing the IC to update with any relevant information would imply that TKC cares about geekhack at all, which they quite clearly do not. They themselves haven't posted any updates in this thread or done any effort at all to add a gb thread.
I found two repeated exact copies of the 1u 'Fn' keys on the shift row.Show Image(https://i.imgur.com/yiR7fyz.png)
I don't think any layout may use two 'Fn' keys.
Would be nice to have one of these 1u 'Fn' change to 1u 'Shift' or 1u 'Entr' or other 1u keys on different rows, e.g. 1u tab, 1u bksp on the QWERTY row, or even the 1u red ASC and DESC keys in the render.
Please observe these repeated keys.
GB is already running (ending this Friday actually) and that picture is out of date. Current layout is available on the GB page, or IIRC someone linked if a few posts above...
Found it - suggest OP to post that to the top of the thread to make things easier....
For those searching for a higher resolution pic of the base set:Show Image(https://freight.cargo.site/t/original/i/556c48153e7198b5095de7a298caa0f7cda1071633d5c553779e7bf5fafccb41/Sanctuary_New_Kit--40-01.jpg)
...
Still have some interesting redundant keys in this set.
Wow now, editing the IC to update with any relevant information would imply that TKC cares about geekhack at all, which they quite clearly do not. They themselves haven't posted any updates in this thread or done any effort at all to add a gb thread.
Most likely because this thread turned into a toxic cess pool. Who would want to have anything to do with a abusive thread. I mean there are times in this thread it basically just came to verbal attacks with no moderation. I don't blame anyone for not posting in this. I wouldn't have posted either. I think people forget just cause someone is running a company doesn't entitle them to be a Jerk or mentally abusive.
Ego much..I found two repeated exact copies of the 1u 'Fn' keys on the shift row.Show Image(https://i.imgur.com/yiR7fyz.png)
I don't think any layout may use two 'Fn' keys.
Would be nice to have one of these 1u 'Fn' change to 1u 'Shift' or 1u 'Entr' or other 1u keys on different rows, e.g. 1u tab, 1u bksp on the QWERTY row, or even the 1u red ASC and DESC keys in the render.
Please observe these repeated keys.
GB is already running (ending this Friday actually) and that picture is out of date. Current layout is available on the GB page, or IIRC someone linked if a few posts above...
Found it - suggest OP to post that to the top of the thread to make things easier....
For those searching for a higher resolution pic of the base set:Show Image(https://freight.cargo.site/t/original/i/556c48153e7198b5095de7a298caa0f7cda1071633d5c553779e7bf5fafccb41/Sanctuary_New_Kit--40-01.jpg)
...
Still have some interesting redundant keys in this set.
Wow now, editing the IC to update with any relevant information would imply that TKC cares about geekhack at all, which they quite clearly do not. They themselves haven't posted any updates in this thread or done any effort at all to add a gb thread.
Most likely because this thread turned into a toxic cess pool. Who would want to have anything to do with a abusive thread. I mean there are times in this thread it basically just came to verbal attacks with no moderation. I don't blame anyone for not posting in this. I wouldn't have posted either. I think people forget just cause someone is running a company doesn't entitle them to be a Jerk or mentally abusive.
I love how the hate only goes to my toxicity and the fact that they lied about why the had to go from a dream set with kits for everyone to a 1 and done set is hilarious. I don’t mind as My job is essentially to troll stupidity. But when you say the manufacturer doesn’t have molds for ERGO/Ortho and then provide examples from the manufacturer of a set that supported ergo/ortho..... an explanation is needed.
I love how the hate only goes to my toxicity and the fact that they lied about why the had to go from a dream set with kits for everyone to a 1 and done set is hilarious. I don’t mind as My job is essentially to troll stupidity. But when you say the manufacturer doesn’t have molds for ERGO/Ortho and then provide examples from the manufacturer of a set that supported ergo/ortho..... an explanation is needed.
:confused:
This GB already happened? No communication from OP or the actual runners (TheKeyCompany, it seems?) in the past month? Completely ridiculous. This isn't an ad board to post teasers to and never visit again. If you can't handle updating a thread, don't post it in the first place.
Still relevant?
:confused:
This GB already happened? No communication from OP or the actual runners (TheKeyCompany, it seems?) in the past month? Completely ridiculous. This isn't an ad board to post teasers to and never visit again. If you can't handle updating a thread, don't post it in the first place.
I'm a bit confused, so this set was IC'd in 2018, then made in 2019, did TheKeyCompany pick it up and run all of it? Or did the OP run it through TheKeyCompany? I know Jason did a lot of advertising for it on insta and reddit. IDK why nobody updated the thread in here, you would think GeekHack would be one of the most important places for your keyset as this is the enthusiast community that is your main target goal. :/ Oh well.
Gameplay
Still relevant?
GameplayStill relevant?
Even Though ActiBlizzard has been F'n up royally with PR recently, having played every single one of the main Diablo games these videos still send a chill down my spine. As much as I don't want to be hyped for any ActiBlizzard game, I just can't help myself here. Also Blizzard is still the best in the biz with their pre rendered stuff, that teaser video GODDAMN!
First look at the sanctuary rebirth set (if you're not in the discord) :)Hey that's actually more readable than I thought. Looking good.
(Attachment Link)
First look at the sanctuary rebirth set (if you're not in the discord) :)
(Attachment Link)
First look at the sanctuary rebirth set (if you're not in the discord) :)
(Attachment Link)
Which discord?
They updated us not long ago on discord.. that we should expect 2 week minimal delay due to Corona virus shutting down China.What's the discord? People keep talking about it but no one links.
https://discord.gg/72JvJUThey updated us not long ago on discord.. that we should expect 2 week minimal delay due to Corona virus shutting down China.What's the discord? People keep talking about it but no one links.
Thanks!https://discord.gg/72JvJUThey updated us not long ago on discord.. that we should expect 2 week minimal delay due to Corona virus shutting down China.What's the discord? People keep talking about it but no one links.
First look at the sanctuary rebirth set (if you're not in the discord) :)
(Attachment Link)
First look at the sanctuary rebirth set (if you're not in the discord) :)
(Attachment Link)
I suddenly got a notification email of this thread after completely forgetting about it :)) May I ask if TKC is still the vendor of this set?Was the vendor. I mean GB is over. Not sure if they picked up extras.
I suddenly got a notification email of this thread after completely forgetting about it :)) May I ask if TKC is still the vendor of this set?Was the vendor. I mean GB is over. Not sure if they picked up extras.
TKC is still the vendor for this. They have confirmed on their discord that they have picked up extras.
Below is a link to their discord:
https://discord.gg/qFjxdde
Confirmation the sets have arrived in the LA Port. On their way to Chicago via train then off to us via truck. Looking at next week if all goes correctly!
SANCTUARY / BRED IS ON A TRAIN ON ITS WAY TO CHICAGO!! WERE SO CLOSE
Rainbow Rise: for transparency to you guys, we have the keys on hand, but the issue with the candybar keysets with the loose 2.25 and 2.75u spacebars was caught after production of SancR/Bred and the fix kits are currently being shipped by air to us and the second we have them on hand a fix kit will be going out with every sancR and bred set.
We did not feel it was right to send out a half-assed product to customers and the logistics of sending out spacebars after the fact is just frankly out of our reach at this point and time so we hope you understand the decision we've made to hold onto them for just a bit longer to give you guys the best possible experience and a set that fully works to your liking.
Rainbow Rise: we are already in talks of building in ergo/ortho support in our future sets.
Rainbow Rise: and then compatibility sets will come for our old ones like sancr/bred
Rainbow Rise: There are a ton more SancR extras than BRED.