Loved the CP ... gimme gimme gimmemoney money money
Loved the CP ... gimme gimme gimme
money money money
God that's hot. I'll probably have to pass, but DAMN that's sexy.Custom boards are easy man. You guys made the best keycaps and switches.
I just realized how the asian community is pushing out ridiculously high quality custom boards left and right while the western community seems almost asleep compared to what is going on there.
Maybe I'll have to learn how to design a keyboard and do something against that someday
God that's hot. I'll probably have to pass, but DAMN that's sexy.Custom boards are easy man. You guys made the best keycaps and switches.
I just realized how the asian community is pushing out ridiculously high quality custom boards left and right while the western community seems almost asleep compared to what is going on there.
Maybe I'll have to learn how to design a keyboard and do something against that someday
nice!Looking at the last picture I'm certain it is.
Please make the pcb split-spacebar compatible..
nice!Yeah, it is already split-spacebar compatible use standard 2u stabilisers
Please make the pcb split-spacebar compatible..
I started by getting some boards made through my Chinese friend. The quality wasn't up to my expectations and I had to re-anodize it in Malaysia. That's when I get to know some machining factories through the introduction of the anodising guy.God that's hot. I'll probably have to pass, but DAMN that's sexy.Custom boards are easy man. You guys made the best keycaps and switches.
I just realized how the asian community is pushing out ridiculously high quality custom boards left and right while the western community seems almost asleep compared to what is going on there.
Maybe I'll have to learn how to design a keyboard and do something against that someday
Well, generally just creating the design files for yet-another-alu-TKL might be something that could be considered "easy". But going through finding and comparing factorys (without financially ruining yourself), setting up everything that has something to do with logistics, getting semi-accurate timeframes, etc. THAT is where the yet-another-alu-TKL gets really complicated really quick (I wouldn't even know how to find even one factory that would manufacture this stuff in a foreign country for a lot less than here in germany), especially when it is run by an individual (maybe with help of others) and not by a company.
If we get into the real-deal high end market case design isn't as simple anymore, and you know it yourself, sound plays a HUGE role in how the end package of the board feels, I wouldn't even know how a good sounding board should sound like, learning how to design that must be a huuge pita. And lastly, if you don't even want to make a "real-deal-high-end-TKL", but want to come up with a different layout that does not have PCB's readily available there is another thing you'd have to learn.
I did my research on this, and I know how friggin' much work goes into this, and I know that you know that as well. Don't just play it off like that, it's not easy, especially not for a first timer. Take pride in your work, please.
Every maker has my respect in that manner, kudos to everyone that made custom boards and ran GB's you guys rock :thumb:nice!Looking at the last picture I'm certain it is.
Please make the pcb split-spacebar compatible..
I always feel that TX is not getting enough attention outside Korea, or is it because of the TX-1800 incident? I understand the feeling looking at a pile keyboards and thinking that these boards are not good enough to be delivered, yet there's nothing you can do about it. Kin-25 has definitely learnt the lesson from the TX1800.
It's a shame that kin's design is under appreciated here, simply because of TX1800 problems.
The case has a very Chinese designer style if that makes sense. Reminds me of thisWatShow Image(https://ae01.alicdn.com/kf/HTB1afGYKFXXXXbBaXXXq6xXFXXXQ/Women-Sleeveless-Heavy-Dew-Back-Waist-Dovetail-font-b-Dress-b-font-font-b-Dresses-b.jpg)
The case has a very Chinese designer style if that makes sense. Reminds me of thiswho is she :-* :-* :-*Show Image(https://ae01.alicdn.com/kf/HTB1afGYKFXXXXbBaXXXq6xXFXXXQ/Women-Sleeveless-Heavy-Dew-Back-Waist-Dovetail-font-b-Dress-b-font-font-b-Dresses-b.jpg)
The case has a very Chinese designer style if that makes sense. Reminds me of thiswho is she :-* :-* :-*Show Image(https://ae01.alicdn.com/kf/HTB1afGYKFXXXXbBaXXXq6xXFXXXQ/Women-Sleeveless-Heavy-Dew-Back-Waist-Dovetail-font-b-Dress-b-font-font-b-Dresses-b.jpg)
Oh nvm.I googled it . :-* :-*The case has a very Chinese designer style if that makes sense. Reminds me of thiswho is she :-* :-* :-*Show Image(https://ae01.alicdn.com/kf/HTB1afGYKFXXXXbBaXXXq6xXFXXXQ/Women-Sleeveless-Heavy-Dew-Back-Waist-Dovetail-font-b-Dress-b-font-font-b-Dresses-b.jpg)
ಠ_ಠ
Oh nvm.I googled it . :-* :-*The case has a very Chinese designer style if that makes sense. Reminds me of thiswho is she :-* :-* :-*Show Image(https://ae01.alicdn.com/kf/HTB1afGYKFXXXXbBaXXXq6xXFXXXQ/Women-Sleeveless-Heavy-Dew-Back-Waist-Dovetail-font-b-Dress-b-font-font-b-Dresses-b.jpg)
ಠ_ಠ
:)) can we trust you? But serious question, who is behind TX? Who designed this? I actually don't know.It says in the first post :P
Must resist.......
Can confirm, tx boards are best boards.Idk if I can resist this one either :( How can 75% be life when I'm not gonna own a 75% board.
I will make the form for TX 84, CP and 75 in awhile. :p
I will make the form for TX 84, CP and 75 in awhile.(http://i.imgur.com/kaZlhW3.png)
I will make the form for TX 84, CP and 75 in awhile. :p
I will make the form for TX 84, CP and 75 in awhile. :p
I will make the form for TX 84, CP and 75 in awhile.oh no my wallet :(
It ain't going to happen, yuktsi was joking. He ruled out a Second CP round in the TX-CP thread ...
It ain't going to happen, yuktsi was joking. He ruled out a Second CP round in the TX-CP thread ...
It ain't going to happen, yuktsi was joking. He ruled out a Second CP round in the TX-CP thread ...
I think he's just talking about the Extras units they have in stock right? The Extras form for TXCP is already open :)
It ain't going to happen, yuktsi was joking. He ruled out a Second CP round in the TX-CP thread ...
I think he's just talking about the Extras units they have in stock right? The Extras form for TXCP is already open :)
Is that on GeekHack? Can't seem to find that thread.
How do brass plates feel? i don't really know the properties of the metal.
kin25 are you going to be handling the orders?
kin25 are you going to be handling the orders?
No, Yuktsi helps me.
I can't... He can do more easily. ^^
kin25 are you going to be handling the orders?
No, Yuktsi helps me.
I can't... He can do more easily. ^^
thanks for the eye candies! did i read that right? 400pc? :eek: :thumb: :thumb: :thumb: :thumb:
Maybe i actually have a chance on this one! thank you kin25 & Yuktsi!kin25 are you going to be handling the orders?
No, Yuktsi helps me.
I can't... He can do more easily. ^^
thanks for the eye candies! did i read that right? 400pc? :eek: :thumb: :thumb: :thumb: :thumb:
when I sent tx1800 (which is my first GB)
3pc of boards were damaged on delivery.
my wife designed for me not to break the boards.
after using this box... No more damage.
No boards have been damaged.
the packagings are all same. (tx87, txpad, txcp, lz.iron, tx75)
I don't know exact number of boards.
maybe more than 400pc.
kin25 are you going to be handling the orders?
No, Yuktsi helps me.
I can't... He can do more easily. ^^
thanks for the eye candies! did i read that right? 400pc? :eek: :thumb: :thumb: :thumb: :thumb:
kin25 are you going to be handling the orders?
No, Yuktsi helps me.
I can't... He can do more easily. ^^
thanks for the eye candies! did i read that right? 400pc? :eek: :thumb: :thumb: :thumb: :thumb:
No he means that his packaging is real good, and out of 400 orders sent not one damaged.
CAN CONFIRM, his packaging is best
Thank god no limited edition ... can't wait for this to happen. TX-CP has rocked my world.
Thank god no limited edition ... can't wait for this to happen. TX-CP has rocked my world.
Since the cases were made for a small, specific amount of pcbs, I'm guessing that there wont be an option to buy an extra plate/pcb for this buy?
Since the cases were made for a small, specific amount of pcbs, I'm guessing that there wont be an option to buy an extra plate/pcb for this buy?
Extra pcb and plate are available.
My man :thumb: Hoping I can get a spot for this.Since the cases were made for a small, specific amount of pcbs, I'm guessing that there wont be an option to buy an extra plate/pcb for this buy?
Extra pcb and plate are available.
Since the cases were made for a small, specific amount of pcbs, I'm guessing that there wont be an option to buy an extra plate/pcb for this buy?
Extra pcb and plate are available.
:eek: Even brass?
Will there be a polycarbonate base option?
I always feel that TX is not getting enough attention outside Korea, or is it because of the TX-1800 incident? I understand the feeling looking at a pile keyboards and thinking that these boards are not good enough to be delivered, yet there's nothing you can do about it. Kin-25 has definitely learnt the lesson from the TX1800. Much like the TX-CP, most of the boards are partially/already made prior to the GB. As in maybe only waiting for the PCB and plate to be made, or waiting to be anodised. He told me that he already has many TX75 in his warehouse, not sure if he is going to sell them though. I am just here to spread some love.
TX-1800 in a nutshell?
TX-1800 in a nutshell?
https://geekhack.org/index.php?topic=68443.0 - page 18 things start going off the rails.
Some people got stuff, others didn't, hardly any communication.
Some people got refunds, some did not.
If that's all there is to it ... can i buy a scratched tx-1800?
TX-1800 in a nutshell?
https://geekhack.org/index.php?topic=68443.0 - page 18 things start going off the rails.
Some people got stuff, others didn't, hardly any communication.
Some people got refunds, some did not.
If that's all there is to it ... can i buy a scratched tx-1800?
kin25, the fact is, you didn't post on GH about the TX1800 since August 2015.
I think posting an apology in that thread would be nice :thumb:
You're basically giving all these reasons as to why people should trust you, but as you know lots of people are upset/worried about the previous disappearance.
As a TX1800 owner and TX-CP owner, I can tell you that Kin deserves all my trust. He answered all my questions, provided pictures of multiple colors, and ultimately he delivered.
Everyone makes mistakes. I don't understand why people in this forum aren't giving him a second chance to redeem himself. Everything that he's doing now, such as not running another GB prior to the keyboards being ready, as well as communicating with us here is all to rebuild that reputation.
Also, English isn't his first language. Give him some slack and an opportunity. If you don't want to join anything Kin related, that's fine. For sure, I would join again and again
Sent from my iPhone using Tapatalk
As a TX1800 owner and TX-CP owner, I can tell you that Kin deserves all my trust. He answered all my questions, provided pictures of multiple colors, and ultimately he delivered.
Everyone makes mistakes. I don't understand why people in this forum aren't giving him a second chance to redeem himself. Everything that he's doing now, such as not running another GB prior to the keyboards being ready, as well as communicating with us here is all to rebuild that reputation.
Also, English isn't his first language. Give him some slack and an opportunity. If you don't want to join anything Kin related, that's fine. For sure, I would join again and again
Sent from my iPhone using Tapatalk
Thanks for many interested to me.
I just visit GH to help yutsi to run GB.
I thought that it is easy for me to upload pics than to send pics to yuktsi.
now I regret my decision.
I definitely agree, the boards look great.Thanks for many interested to me.
I just visit GH to help yutsi to run GB.
I thought that it is easy for me to upload pics than to send pics to yuktsi.
now I regret my decision.
Don't go, Kin. It's been really nice to see the pics and have these interactions with you.
Everyone makes mistakes. I don't understand why people in this forum aren't giving him a second chance to redeem himself. Everything that he's doing now, such as not running another GB prior to the keyboards being ready, as well as communicating with us here is all to rebuild that reputation.
Kin25 delivers. Thank you for even offering your kits to GH.
Thanks for many interested to me.
I just visit GH to help yutsi to run GB.
I thought that it is easy for me to upload pics than to send pics to yuktsi.
now I regret my decision.
Don't go, Kin. It's been really nice to see the pics and have these interactions with you.
I'm new enough that I had no part in the TX-1800, so all I can add there is that I've made plenty of mistakes professionally. All you can do is own them, learn and move on, which is seems Kin is doing 100%. I do have a TX-CP and it's absolutely gorgeous- packaging and board. I'm salivating at the chance to jump in for the TX-75 if I'm lucky enough to see the announcement before all you other maniacs. Zero hesitation to back Kin again. And throw Yuktsi in the mix... jeez, it would seem to me a world class team. Echoing others, but I'm grateful these are around and we have the chance to bring them westward.
Everyone makes mistakes. I don't understand why people in this forum aren't giving him a second chance to redeem himself. Everything that he's doing now, such as not running another GB prior to the keyboards being ready, as well as communicating with us here is all to rebuild that reputation.
I wonder if your opinion would be different if he took your money and did not send the product?
I imagine it would be.
Everyone makes mistakes. I don't understand why people in this forum aren't giving him a second chance to redeem himself. Everything that he's doing now, such as not running another GB prior to the keyboards being ready, as well as communicating with us here is all to rebuild that reputation.
I wonder if your opinion would be different if he took your money and did not send the product?
I imagine it would be.
Everyone makes mistakes. I don't understand why people in this forum aren't giving him a second chance to redeem himself. Everything that he's doing now, such as not running another GB prior to the keyboards being ready, as well as communicating with us here is all to rebuild that reputation.
I wonder if your opinion would be different if he took your money and did not send the product?
I imagine it would be.
There is also plenty of evidence to show that Kin has refunded those that didn't get their board. Look at both sides of the coin and ultimately it is up to individuals whether to decide to join or not. We all know the risks for any Gb.
Sent from my iPhone using Tapatalk
Here we go again with ****posting about TX1800. If you want to be salty about TX1800, go bump that thread, so kin25 may notice about it. Don't go here, it will sour the hype. Kin25 realized that he made a mistake on that GB, which is why he want to rectify it by offering refunds, or remake them at his own cost.
Man, I wanna like it. Any chance you can get pictures of other colours of anodization since most of these boards should be done already? Also, any chances of those photos of his warehouse?He posted some pics on the previous page. They're only top down but they show you the colors.
After those pics I'm even more hyped to make this my third TX board. My wallet is the only thing standing in my way.
Dayum, these boards are that good huh? Hopefully I get a spot on this one.After those pics I'm even more hyped to make this my third TX board. My wallet is the only thing standing in my way.
If I get another one, would be my 5th :)
Sent from my iPhone using Tapatalk
(Attachment Link)
Black
(Attachment Link)
Silver
(Attachment Link)
grey
(Attachment Link)
Red
(Attachment Link)
Blue
(Attachment Link)
Purple
(Attachment Link)
Pink
(Attachment Link)
Gold
all the anodize is super high quality..
Damn, now gotta decide between gray and black :-\
This is looking good. Thanks for the additional pictures :)
That grey is such a winner! Can't wait for this to go live!
All the colors look awesome... This will be hard to choose.
When will this (and the extras of TX-87) be available? Again, no rush, I'm just hyped. :thumb:
colors of txpad (same colors with tx87)
(Attachment Link)
(Attachment Link)
green is only available in bundle of TX87 and TX Pad, and not for a TX87 by itself, correct?Right. Green is one of the bundle colors.
(Attachment Link)
Black
(Attachment Link)
Silver
(Attachment Link)
grey
(Attachment Link)
Red
(Attachment Link)
Blue
(Attachment Link)
Purple
(Attachment Link)
Pink
(Attachment Link)
Gold
Will tX84 available for sale?
Not that im not enjoying all the pics but when do we move on to the stage where i give you the money in exchange for goods or services?
All aboard the hype train.Show Image(http://i.imgur.com/2f5ejCT.jpg)
colors of txpad (same colors with tx87)
(Attachment Link)
(Attachment Link)
all the anodize is super high quality..
To tell the true...
This time anodizing... (Tx.cp and Tx.75)
is the worst in tx-series.
Tx.87, Tx.pad and Tx.1800 were better in anodizing.
all the anodize is super high quality..
To tell the true...
This time anodizing... (Tx.cp and Tx.75)
is the worst in tx-series.
Tx.87, Tx.pad and Tx.1800 were better in anodizing.
Hmm. Sorry, but what does this actually mean? Is the layer much thinner or are there scratches? I assume all cases are examined before shipped out so no defected cases are sent out.
This is looking good. Thanks for the additional pictures :)
I tried uploading last time.
But it looked too many..
So I just uploaded a few pics.
But.. I realize many persons want more pics.. :)
3T weight bar : Stainless steel. Brass
This is looking good. Thanks for the additional pictures :)
I tried uploading last time.
But it looked too many..
So I just uploaded a few pics.
But.. I realize many persons want more pics.. :)
More pics are always good. :thumb:3T weight bar : Stainless steel. Brass
Please pardon my ignorance, but what does "3T" mean?
Will tX84 available for sale?
yes.
but I made a few tx84.
there is no extra 84 in some colors.
especial cyan, grey, light purple are sold well. (84, 87 and pad)
so extra board are a few.
I have to expain tx-series.As someone new to the TX series i really appreciate the brief history behind the TX projects. Getting to know the good guys behind the making of these awesome boards makes them that much more interesting! :thumb: :)
LZ and I started project of tx87 3 years ago.
I wanted to make boards for custom keyboard beginners.
low price, simple design, good feeling of typing.
I contacted many factories and made many proto boards.
because I planed to make 300pc to decrease the price.
I had to test for a long time.
I thought...making small quantity of tx1800 was better before tx87.
so.. tx1800 was the first keyboard of tx-series.
tx1800 had some problems.
some scratches, anodizing.
I don't like rough sanding.
because of soft sanding... scratches are easilly shown, anodizing error, too.
but I didn't want to change sanding.
I made more tx1800 and fixed some holes.
it took a lot of time.
two years ago.. tx87 and txpad were made..
they were made well in good quality. (20% not good)
I sold them in Korea and China.
I have sent many tx87 and txpad to chinese provider in china.
Most of extra are in my warehouse now
some extra boards are in his warehouse.
Leeku suggested to make txcp and tx75.
so.. I made txcp and tx75.
I ran txcp GB in Korea and China.
Yuktsi helped GB in GH.
There was no tx75 GB in Korea.
All tx75 and txcp are in my warehouse.
I have times to pack and communicate for next 4 months,
in March I will be busy again.
Hello peeps, sorry for the delay in sale of TX75. Was away helping with the renovation of my grandparent's house. Since this is not a GB, I won't be starting a GB thread. Kin will have boards shipped within a week after payment is made to me (he promised 24 hours, but let's not be too harsh to him), I will have the invoice sent within a 24 hours.
p/s: preparing the google form now ><
Don't hate me kin25
I can finally stop stalking Elton for Octagon V3
Oh god why now!!! A week before Christmas :(
oh god I'm late to join 55 minutes. little chance to get it :-[
oh god I'm late to join 55 minutes. little chance to get it :-[
maybe you are not late.
I see brass option but i don't see alum or ss so what is the default plate material other than the brass plate? Any info on difference between brass/ss/alum btw?
Any info on difference between brass/ss/alum btw?
I'm excited to try brass :)Any info on difference between brass/ss/alum btw?
It is hard to express the difference of plates.
For example..
When you are running..
On stone floor = ss
On soft track = brass
On wood floor = alu
It's winter i prefer carpetAny info on difference between brass/ss/alum btw?
It is hard to express the difference of plates.
For example..
When you are running..
On stone floor = ss
On soft track = brass
On wood floor = alu
I don't know about other people but I prefer steel for linear and alum for tactile (haven't tried brass).
Which is best for tactile/linear switches?
Sent from my SM-G935F using Tapatalk
I am a linear user. so I like brass plate.I'm excited to try brass :)Any info on difference between brass/ss/alum btw?
It is hard to express the difference of plates.
For example..
When you are running..
On stone floor = ss
On soft track = brass
On wood floor = alu
I don't know about other people but I prefer steel for linear and alum for tactile (haven't tried brass).
Which is best for tactile/linear switches?
Sent from my SM-G935F using Tapatalk
I don't know about other people but I prefer steel for linear and alum for tactile (haven't tried brass).
Which is best for tactile/linear switches?
Sent from my SM-G935F using Tapatalk
you are right.
If you feel fingertip pain in SS plate, brass plate would make the pain reduce.
I only saw 2 pages in the form.I don't know about other people but I prefer steel for linear and alum for tactile (haven't tried brass).
Which is best for tactile/linear switches?
Sent from my SM-G935F using Tapatalk
you are right.
If you feel fingertip pain in SS plate, brass plate would make the pain reduce.
Looking forward to trying brass!
Sorry if I missed answer elsewhere in thread... but there was no option to choose weight material. Will they all be brass?
I don't know about other people but I prefer steel for linear and alum for tactile (haven't tried brass).
Which is best for tactile/linear switches?
Sent from my SM-G935F using Tapatalk
you are right.
If you feel fingertip pain in SS plate, brass plate would make the pain reduce.
Looking forward to trying brass!
Sorry if I missed answer elsewhere in thread... but there was no option to choose weight material. Will they all be brass?
Yeah is the brass weight included? Saw the price was only 308 + 22 if you wanted the brass plate
Wait, so does each tx75 come with a brass weight, and extras are 44? Or do they not normally come with a brass weight and there's only 5 pieces, meaning there will be people that do not get a brass weight?
Wait, so does each tx75 come with a brass weight, and extras are 44? Or do they not normally come with a brass weight and there's only 5 pieces, meaning there will be people that do not get a brass weight?
I don't see options for different plates or extra when i filled mine. If we don't select brass weight we will get stainless steel weight correct?For Yuktsi's TGR-910 he kept track of the first submission time.
If i revise my form will that affect my order in line once i save the changes?
Sent from my SM-G935F using Tapatalk
Haha, it might not have merit, but spending this kind of money, you want the best, and it to look the best! If demand is high, would there be any chance to make a couple more? It would really suck not to get the complete package for me at least!
Joined. Lots of confusion here, so does the base kit come with a SS weight and is the brass plate option just an upgrade? Or does the brass plate come as an extra to the base kit's SS or alu plate, so that you get two plates total.
Also hoping to buy and extra SS plate/pcb so I left that in the notes.
Ahh gotcha, don't worry about it, the form kinda confused me heh. Thanks! Really hoping I get a gray kit.Joined. Lots of confusion here, so does the base kit come with a SS weight and is the brass plate option just an upgrade? Or does the brass plate come as an extra to the base kit's SS or alu plate, so that you get two plates total.
Also hoping to buy and extra SS plate/pcb so I left that in the notes.
Basic option is SS weight bar.
Exchanging to brass plate : $22
Exchanging to brass weight : $44
One plate is given.
Sorry for my bad english.
Joined. Lots of confusion here, so does the base kit come with a SS weight and is the brass plate option just an upgrade? Or does the brass plate come as an extra to the base kit's SS or alu plate, so that you get two plates total.
Also hoping to buy and extra SS plate/pcb so I left that in the notes.
Certainly hope I can get one. Will probably also try and get a TX87 + pad when that goes down.
I'm ready to give you my money ;)Certainly hope I can get one. Will probably also try and get a TX87 + pad when that goes down.
I am ready to pack.. Haha
I'm ready to give you my money ;)Certainly hope I can get one. Will probably also try and get a TX87 + pad when that goes down.
I am ready to pack.. Haha
I'm ready to give you my money ;)Certainly hope I can get one. Will probably also try and get a TX87 + pad when that goes down.
I am ready to pack.. Haha
kin what will the price be for tx87/tx84? Need to know how much money I will need :thumb:
kin what will the price be for tx87/tx84? Need to know how much money I will need :thumb:
Top, bottom, pcb, plate(alu or SS), SS 2T weight bar, mat.
Tx87 : $308(alu bottom set) $275(pc bottom set)
Txpad : $154(alu bottom set) $137.5(pc bottom set)
Not included paypal fee (4%) and shipping cost.
kin what will the price be for tx87/tx84? Need to know how much money I will need :thumb:
Top, bottom, pcb, plate(alu or SS), SS 2T weight bar, mat.
Tx87 : $308(alu bottom set) $275(pc bottom set)
Txpad : $154(alu bottom set) $137.5(pc bottom set)
Not included paypal fee (4%) and shipping cost.
Great price!
I hope tx87 will be my first korean custom ;D
TX84 When?!?!!
TX84 When?!?!!
Yes I want to order TX84 as well, but where is the form.....
For reducing shipping cost..
I can pack them together.
Sorry... I am still confused about the options in the Google form.
If I select "No" on the "Brass plate +$22", will I get a steel or aluminium plate? I am a tactile user and prefer alu plate not steel.
TX84 When?!?!!
Yes I want to order TX84 as well, but where is the form.....
For reducing shipping cost..
I can pack them together.
TX84 When?!?!!
Yes I want to order TX84 as well, but where is the form.....
For reducing shipping cost..
I can pack them together.
Message to me
Paid! Chose SS plate and left it in the notes. Looks like the extra plate/pcb dream is ded. rip
Priority of color and plate selection will given to those who paid first.
Thanks Yuktsi for these additional details.It's not that hard bro. Worse comes to worst, just solder some jump wire will solve the problem.Paid! Chose SS plate and left it in the notes. Looks like the extra plate/pcb dream is ded. rip
I was interested in an extra PCB just to be safe. I guess I will have to be extra careful with my kit!
No, plate color is standardisedPriority of color and plate selection will given to those who paid first.
Can we have a plate with a different color than the color we chose on the order form?
Paid! Chose SS plate and left it in the notes. Looks like the extra plate/pcb dream is ded. rip<3
No, plate color is standardisedPriority of color and plate selection will given to those who paid first.
Can we have a plate with a different color than the color we chose on the order form?
Paid! Chose SS plate and left it in the notes. Looks like the extra plate/pcb dream is ded. rip<3
you can buy it later bro.
Kin-25 will most likely probably make more later.
I think standardized means you can only choose stainless steel color. aluminium silver, or brass color, nothing else
can please someone send me the form. Link???
I cant find. Damn. I want one
Qnd is there an calculator for shipping costs to Germany?
Thanks man!
Is there an layout options-sheet somewhere? (or: is split spacebar supported?)
Qnd is there an calculator for shipping costs to Germany?
nice!Yeah, it is already split-spacebar compatible use standard 2u stabilisers
Please make the pcb split-spacebar compatible..
2.75x1.0x1.25x 2.25x
2.25x1.0x1.25x 2.75x
Basically you are use utilising the stabilisers holes for the 6.25x/7x spacebars and split the 6.25x spacebars into 3 parts.
I believe the idea came from either LZ or Leeku.
Some more silly questions from me: ;D
TX-75: Can we have two different colors for the top and bottom halves of the case? I expect a negative answer, since kin25 said there are only 60 extras for GH.
TX-87 and TX-Pad: Same question. Possible to mix colors for the top and bottom?
TX-84: Are the bottom halves of the TX-84 and TX-87 swappable?
Some more silly questions from me: ;D
TX-75: Can we have two different colors for the top and bottom halves of the case? I expect a negative answer, since kin25 said there are only 60 extras for GH.
TX-87 and TX-Pad: Same question. Possible to mix colors for the top and bottom?
TX-84: Are the bottom halves of the TX-84 and TX-87 swappable?
Sorry..
Now mixing is impossible. (Risk of stock)
Top is swappable (difference is blocks)
Thanks man!
Is there an layout options-sheet somewhere? (or: is split spacebar supported?)
Qnd is there an calculator for shipping costs to Germany?
Split spacebar compat:nice!Yeah, it is already split-spacebar compatible use standard 2u stabilisers
Please make the pcb split-spacebar compatible..
2.75x1.0x1.25x 2.25x
2.25x1.0x1.25x 2.75x
Basically you are use utilising the stabilisers holes for the 6.25x/7x spacebars and split the 6.25x spacebars into 3 parts.
I believe the idea came from either LZ or Leeku.
Which color will the PCB be? Black, as in the pictures posted in the OP?
Which color will the PCB be? Black, as in the pictures posted in the OP?
Yes. Only black pcb.
colors of txpad (same colors with tx87)
(Attachment Link)
(Attachment Link)
TX84 When?!?!!
Yes I want to order TX84 as well, but where is the form.....
For reducing shipping cost..
I can pack them together.
Message to me
I sure hope so :p since the brass plate was one of the things that got me highly interested in this board. Also saves time on having to desolder the first pcb if I ever want to do a different switch.Paid! Chose SS plate and left it in the notes. Looks like the extra plate/pcb dream is ded. rip<3
you can buy it later bro.
Kin-25 will most likely probably make more later.
colors of txpad (same colors with tx87)
(Attachment Link)
(Attachment Link)
I have question regarding case colors. In the first image and in the first row of displayed TX Pads, the two that are grey. They seem to be two different types of grey color. Which is called what?
Will the same grey for TX 75 be available for TX Pad and TX 87?
Thank you!
Wait so we cant buy tx84 on its own?
We need to buy tx pad aswell?
Wait so we cant buy tx84 on its own?
We need to buy tx pad aswell?
Could be wrong... but I read that as only light grey is bundle color- have to buy both.
As for TX84 and TXPad, I think you need to ask kin directly, about whether your color of choice is bundled color or not. If it is, then you must buy both.
As for TX84 and TXPad, I think you need to ask kin directly, about whether your color of choice is bundled color or not. If it is, then you must buy both.
colors of txpad (same colors with tx87)
(Attachment Link)
(Attachment Link)
I have question regarding case colors. In the first image and in the first row of displayed TX Pads, the two that are grey. They seem to be two different types of grey color. Which is called what?
Will the same grey for TX 75 be available for TX Pad and TX 87?
Thank you!
Tx1800, txcp, tx75 grey is light grey. ( green grey)
Two grey of tx87 and txpad are light grey and titan grey.
Light grey is bundle color.
So you can't buy single tx87 or txpad.
You must buy light grey set of tx87+txpad.
Sorry for my bad english.
colors of txpad (same colors with tx87)
(Attachment Link)
(Attachment Link)
I have question regarding case colors. In the first image and in the first row of displayed TX Pads, the two that are grey. They seem to be two different types of grey color. Which is called what?
Will the same grey for TX 75 be available for TX Pad and TX 87?
Thank you!
Tx1800, txcp, tx75 grey is light grey. ( green grey)
Two grey of tx87 and txpad are light grey and titan grey.
Light grey is bundle color.
So you can't buy single tx87 or txpad.
You must buy light grey set of tx87+txpad.
Sorry for my bad english.
On the first quoted picture with the TX-Pads from kin25, the titanium grey is on the left or right?
About the two purple colors (second picture), I assume that the light purple is displayed on the bottom and the purple on top?
colors of txpad (same colors with tx87)
(Attachment Link)
(Attachment Link)
I have question regarding case colors. In the first image and in the first row of displayed TX Pads, the two that are grey. They seem to be two different types of grey color. Which is called what?
Will the same grey for TX 75 be available for TX Pad and TX 87?
Thank you!
Tx1800, txcp, tx75 grey is light grey. ( green grey)
Two grey of tx87 and txpad are light grey and titan grey.
Light grey is bundle color.
So you can't buy single tx87 or txpad.
You must buy light grey set of tx87+txpad.
Sorry for my bad english.
On the first quoted picture with the TX-Pads from kin25, the titanium grey is on the left or right?
About the two purple colors (second picture), I assume that the light purple is displayed on the bottom and the purple on top?
From top left
Silver/red/lightgrey/titangrey/darkpurple/blue
Black/gold/yellow/orange/purple/pink
Tx87, txpad, txcp and tx75 purple are Pinky Purple.
There is only dark purple in tx87 and txpad.
Dark purple is bundle color. (Bundle of tx87 and txpad)
:)
Pinky purple = light purple
Just two kind of purple.
:)
Pinky purple = light purple
Just two kind of purple.
Thanks. The "pinky purple" from the TX-75 pictures looks different than the "light purple" from the TX-Pad pics however, but it might be the lighting.
Thanks for the hard work yuktsi and kin25 :thumb: Are we going to get tracking numbers when the keyboards ship? Also, what's the average shipping time to USA?
Thanks for the hard work yuktsi and kin25 :thumb: Are we going to get tracking numbers when the keyboards ship? Also, what's the average shipping time to USA?
I sent it today.
I let you know the tracking number by pm.
I don't know exactly when it arrive...
Pretty sure somewhere up in the thread Kim said he can only ship five a day. So it really depends on how quickly you ordered and how many orders there are.Oh okay, I missed that message. :)
Kim can you tell us how many tx75 were sold this time?
Pretty sure somewhere up in the thread Kim said he can only ship five a day. So it really depends on how quickly you ordered and how many orders there are.Oh okay, I missed that message. :)
Kim can you tell us how many tx75 were sold this time?
Amazing fulfillment performance kin25 :)Agreed, the fact that we don't have to wait months and months for our boards is just amazing. A breath of fresh air from the usual style of buys in this hobby.
I wish all keyboard GBs worked like this!
On other news, my wallet got anorexia, I blame kin ...
Amazing fulfillment performance kin25 :)
I wish all keyboard GBs worked like this!
On other news, my wallet got anorexia, I blame kin ...
Will there be any left over?
Nice! I might have to snag one once I get to the office tomorrow. Thanks! Where would I order from?Here is the order form: https://goo.gl/4omche (https://goo.gl/4omche)
Paid yesterday, PM'd yuktsi with a question regarding the brass plate upgrade I added.
Paid yesterday, PM'd yuktsi with a question regarding the brass plate upgrade I added.
Brass plate and brass weight were long gone, they were very limited
Paid yesterday, PM'd yuktsi with a question regarding the brass plate upgrade I added.
Brass plate and brass weight were long gone, they were very limited
I am aware they're limited, but I had filled out my form on Saturday and was missed in the initial invoicing, so I messaged yuktsi to confirm, just in case.
where will this be shipping from?I think from The Sun where all the keyboard gods makes them..
Great! ThanksKeyboards that are earthbound will be shipping through Korea though.
Sent from my iPhone using Tapatalk
Guys, I am getting a lot of PMs. I will reply and invoice in awhile. Give me a couple more hours.
Order form
https://goo.gl/4omche
yeee buy buy buy . who needs money in their wallet anyway.
Guys, I am getting a lot of PMs. I will reply and invoice in awhile. Give me a couple more hours.
Order form
https://goo.gl/4omche
yeee buy buy buy . who needs money in their wallet anyway.
No worries, just wanted to make sure my PM was in and known. I was actually about to PM kin to check about the brass plate.
I never got a response from filling out the TX75 google form. Maybe I should try to buy the 84/87? How do you buy the 84/87?Might've just been missed like mine initially was. Just PM yuktsi, he can help you out.
Thanks for your fast shipping process kin25! with this, my collection of your creations is complete :eek: :eek: :eek:
Any plans for future creations?
To collect all kbds are impossible. :)Sounds like my wallet is going to stay empty for a while and I'm pretty sure I'm okay with that with all the cool stuff coming out.
I have 3 plans.
2 project are doing now slowly.
1 project don't start yet.
I never got a response from filling out the TX75 google form.
Is this board the styleThe first one where the plate is mounted to the case.
"switch plate mounted to case"
or the usual poker style assembly?
Am i too late for an o rder?I doubt it... just enter, you'll see.
Am i too late for an o rder?
Good morning:D
12/22 THU
Ineffabletao (repacking)
SaySo
Saiph
Codarl
12/23 FRINo worries! Have a safe drive!
I have to go somewhere with my wife in the morning.
I don't know I can go to post office or not.
i am still thinking
If you ship them: are they valued normal or under-valued (e.g. 50$)??
Tax in Germany totals in somewhat 80$ on top
i am still thinking
If you ship them: are they valued normal or under-valued (e.g. 50$)??
Tax in Germany totals in somewhat 80$ on top
He told me he generally he declares them as $50.
Filled out a form, but no invoice yet? Did I miss it?
That was insanely fast... The TX stuff I ordered ;) is currently stuck at the airport (getting close to three days without any tracking update) :( . Usually they leave the airport within 2-12 hours and are at my door a day later, I hope that the delay is just caused by christmas stress. A lost package would ruin the year for me.Did you get a tracking number?
That was insanely fast... The TX stuff I ordered ;) is currently stuck at the airport (getting close to three days without any tracking update) :( . Usually they leave the airport within 2-12 hours and are at my door a day later, I hope that the delay is just caused by christmas stress. A lost package would ruin the year for me.Did you get a tracking number?
(I never received one)
Ahaaa. That explains it. :)That was insanely fast... The TX stuff I ordered ;) is currently stuck at the airport (getting close to three days without any tracking update) :( . Usually they leave the airport within 2-12 hours and are at my door a day later, I hope that the delay is just caused by christmas stress. A lost package would ruin the year for me.Did you get a tracking number?
(I never received one)
Yes, otherwise tracking it would be pretty hard :D . That said I didn't order through yuktsi. kin25 was nice enough to send me a pic of the label before he shipped it (that's where I got the tracking info from)
Ahaaa. That explains it. :)
Yes this is a troublesome time of the year to receive packages. Hopefully yours is just stuck and not lost.
Having said that. It would have been nice to receive a tracking number to be able to keep some sort of eye on the package. I've had some problems with the Swedish postal service lately. Adding Christmas to the mix will make their service even worse.
I recently dealt with kin25 directly and it was one of the smoothest and best experiences I've had with a purchase. Highly recommend working with him where possible!Can confirm, would throw more money at him in exchange for keyboards if I had it :thumb: :thumb:
I recently dealt with kin25 directly and it was one of the smoothest and best experiences I've had with a purchase. Highly recommend working with him where possible!
Can confirm, would throw more money at him in exchange for keyboards if I had it :thumb: :thumb:
Thank you :-[
Nice color and very heavy!
Thank you :-[
Nice color and very heavy!
How long did that shipping take? Seems like pretty quick?
Thank you :-[
Nice color and very heavy!
How long did that shipping take? Seems like pretty quick?
Korean EMS is very quick.
to USA..
I saw it arrived in 3 days. generally in a week
Thank you :-[
Nice color and very heavy!
How long did that shipping take? Seems like pretty quick?
Would love to everyone's tx-75 here :)
Sent from my SM-G935F using Tapatalk
Yep, that's why I opt for EMS shipments for my Japanese imports.Thank you :-[
Nice color and very heavy!
How long did that shipping take? Seems like pretty quick?
Korean EMS is very quick.
to USA..
I saw it arrived in 3 days. generally in a week
Same to Germany... usually at least.
EMS is generally really fast, usually stuff from Japan and Korea takes 2-4 days which is phenomenal.
Show Image(http://i.imgur.com/L3B9mX0.jpg)Show Image(http://i.imgur.com/tO5KSkH.jpg)
Waiting for gold stabs to build. Also waiting on a second TX-75 :)
Arrived in 3 days to USA, thanks kin!
Anyone have a TX84 they have received? Would love to see pics. My FOMO disease is acting up and I am really debating asking Kin to add one of those to the package before it heads to the desert southwest...Almost, though it's a TX87 I'm waiting on. Current status is that the airport people didn't have time to hand it over to DHL for the final delivery yet:
I'll post pics of it here once it arrives if I'm allowed to/if people are interested in seeing them.
No, there hasn't been a form. But I do believe Kin and Yuk Tsi are answering questions about color availability/providing invoices as asked. I could be wrong on that, but it seems that some are going out.
Merry Christmas to all my fellow degenerates. Hope Santa fills your stockings with switches and there's a heavy slab of Korean aluminum under the tree. :)
kin what will the price be for tx87/tx84? Need to know how much money I will need :thumb:
Top, bottom, pcb, plate(alu or SS), SS 2T weight bar, mat.
Tx87 : $308(alu bottom set) $275(pc bottom set)
Txpad : $154(alu bottom set) $137.5(pc bottom set)
Not included paypal fee (4%) and shipping cost.
What does "" , mat. "" mean?
The finish matte or ..?
Thank you all gher.I believe in Santa and he's from Korea! happy holidays you all.
I enjoyed packing 8 keyboards happily like santa.
(It was cold like the Arctic)
I have to sleep.
Have a nice holiday.
I corresponded with Kin25, and purchased a TX84 in green. Communication was great, and the process was very smooth. Thank you Kin!Of you can get your hands on GMK TA Royal Alpha, that'd be an awesome fit.
I'm not sure what keycaps go with green anodizing, but coming across a quality green is uncommon. If anyone has any color coordinating tips, i'm all ears. I'm jumping headfirst into a custom keyboard. I hope it goes all right.
I corresponded with Kin25, and purchased a TX84 in green. Communication was great, and the process was very smooth. Thank you Kin!Might go well with JTK PoW green and purple always look good. Also EnjoyPBT green legends with CYM mods if you can find them. GL
I'm not sure what keycaps go with green anodizing, but coming across a quality green is uncommon. If anyone has any color coordinating tips, i'm all ears. I'm jumping headfirst into a custom keyboard. I hope it goes all right.
Haha I had the same issue, loved the blue so much, got it, then had to figure out what set to go with, ended up asking kin and he was super helpful in giving some ideas on what he thought looked best with the board, amazing guy, super helpful, glad I got a two keyboards from himCould always go Hydro if you want a GMK set on there. Dasher/Dancer if you want SA and don't mind the wait.
Love this thread.Go Skelefuse, that's what I'm doing with my purple top 910.
Wanted a green 87 so bad. Couldn't pull the trigger with Pad bundled too. I do wish to stay married.
With green though, I really like the upcoming terminal GMK set. And every time I use my enjoy PBT set, it makes me want to buy more enjoy PBT. As of a couple of days ago, there were extras from the GB available and green was one of the extras options, I'm pretty sure.
For the TX-75, I've got purple coming, so hard to keep Skeletor off it. Maybe Hyperfuse. Fun problems to solve, right?
Go Skelefuse, that's what I'm doing with my purple top 910.
Yeah, I'm also currently thinking about which set to put on the green one. I've got a JTK Black & Pink on order which will hopefully look awesome, if not I've got Skeletor. If that also fails I think I have to get a Troubled Minds SA set... and JTK Toxic... and Troubled Minds GMK... yeah, that will be kinda hard on my wallet.
Haha I had the same issue, loved the blue so much, got it, then had to figure out what set to go with, ended up asking kin and he was super helpful in giving some ideas on what he thought looked best with the board, amazing guy, super helpful, glad I got a two keyboards from himCould always go Hydro if you want a GMK set on there. Dasher/Dancer if you want SA and don't mind the wait.
Sent from my LG-V20
Decisions, decisions...who to build first?
TX75 in gold with steel plate and TX-CP in silver with aluminum plate. These boards are absolutely gorgeous and weight a ton! Thanks Yuktsi and Kin!Show Image(http://uploads.tapatalk-cdn.com/20161225/8bf8d7406da87a8c92af399c6fc53cd5.jpg)Show Image(http://uploads.tapatalk-cdn.com/20161225/34c92ac85bf65c3c937e98e07538437a.jpg)Show Image(http://uploads.tapatalk-cdn.com/20161225/c101c35112ebf63b54ee56d59f9eedd2.jpg)
Good morning.This Santa works all year long haha. Go spend today with the family! 👪
Today is christmas.
I will pack some kbds.
Contact with me.
Good morning.
Today is christmas.
I will pack some kbds.
Contact with me.
Good morning.
Today is christmas.
I will pack some kbds.
Contact with me.
Merry Christmas Kin! :D
Merry Christmas to you too! Thank you for all your hard work and making these keyboards available to us. :)Good morning.
Today is christmas.
I will pack some kbds.
Contact with me.
Merry Christmas Kin! :D
This christmas is the busiest and happiest in my whole life.
I hope many ghers will be happy with tx kbds.
Tx84+TxPad:
https://imgur.com/a/71DLu (https://imgur.com/a/71DLu)
Tx84+TxPad:(http://i.imgur.com/TLRsvDN.gif)
https://imgur.com/a/71DLu (https://imgur.com/a/71DLu)
Plz come to Korea and take some pictures of tx kbds.
Tx84+TxPad:The lip is kinda growing on me..
https://imgur.com/a/71DLu (https://imgur.com/a/71DLu)
Tx84+TxPad:
https://imgur.com/a/71DLu (https://imgur.com/a/71DLu)
Nice!
Is there an overview of color options for the tx87?
Tx84+TxPad:
https://imgur.com/a/71DLu (https://imgur.com/a/71DLu)
Is there going to be a GB for the TX87 in the near future?Just message kin about it. I just talked with him over Telegram last night and picked up a TX-87+TX-Pad combo.
Need a custom TKL in my life and missed out on the Matrix Abel! :rolleyes:
Is there going to be a GB for the TX87 in the near future?Just message kin about it. I just talked with him over Telegram last night and picked up a TX-87+TX-Pad combo.
Need a custom TKL in my life and missed out on the Matrix Abel! :rolleyes:
He's very helpful throughout the process, showing photos of the boards in question and how they look with particular options and whatnot.
Sent from my LG-V20
Sure thing! Depending on color options, he also has TX-84s, if you want to look into that as well.Is there going to be a GB for the TX87 in the near future?Just message kin about it. I just talked with him over Telegram last night and picked up a TX-87+TX-Pad combo.
Need a custom TKL in my life and missed out on the Matrix Abel! :rolleyes:
He's very helpful throughout the process, showing photos of the boards in question and how they look with particular options and whatnot.
Sent from my LG-V20
Wow, thanks for the quick reply bro! :thumb:
Sure thing! Depending on color options, he also has TX-84s, if you want to look into that as well.Is there going to be a GB for the TX87 in the near future?Just message kin about it. I just talked with him over Telegram last night and picked up a TX-87+TX-Pad combo.
Need a custom TKL in my life and missed out on the Matrix Abel! :rolleyes:
He's very helpful throughout the process, showing photos of the boards in question and how they look with particular options and whatnot.
Sent from my LG-V20
Wow, thanks for the quick reply bro! :thumb:
Sent from my LG-V20
Tx84+TxPad:
https://imgur.com/a/71DLu (https://imgur.com/a/71DLu)
Sure thing! Depending on color options, he also has TX-84s, if you want to look into that as well.Is there going to be a GB for the TX87 in the near future?Just message kin about it. I just talked with him over Telegram last night and picked up a TX-87+TX-Pad combo.
Need a custom TKL in my life and missed out on the Matrix Abel! :rolleyes:
He's very helpful throughout the process, showing photos of the boards in question and how they look with particular options and whatnot.
Sent from my LG-V20
Wow, thanks for the quick reply bro! :thumb:
Sent from my LG-V20
The TX84 is the winkeyless TKL, right?
Thank you :-[Purple TX is so nice :pShow Image(http://image.noelshack.com/fichiers/2016/51/1482572091-img-2765.jpg)Show Image(http://image.noelshack.com/fichiers/2016/51/1482572094-img-2766.jpg)Show Image(http://image.noelshack.com/fichiers/2016/51/1482572161-img-2875.jpg)Show Image(http://image.noelshack.com/fichiers/2016/51/1482572489-img-2872.jpg)Show Image(http://image.noelshack.com/fichiers/2016/51/1482572132-img-2790.jpg)
Nice color and very heavy!
I suggest pming kin on telegram and asking. You probably will get a quick response and can get it sorted out before your board goes out
Please help me out: shall I get an brass plate??
I will use either linear vintage mx blacks or tactile mx clears/browns
an brass plate is
extra 20$ btw
Please help me out: shall I get an brass plate??
I will use either linear vintage mx blacks or tactile mx clears/browns
an brass plate is
extra 20$ btw
I think the question should be "Are there any brass plates/weights left to order?"
replied to all messages and invoices are all out!
Hi, I got your submission on the 22nd. It seems like I've overlooked a few of you.replied to all messages and invoices are all out!
I still haven't recieved anything :( I filled out the form on sunday 18th.
Hi, I got your submission on the 22nd. It seems like I've overlooked a few of you.No, thank YOU! ;D
Anyway, invoices are sent. Thank you.
What keycaps are on the gold TX-75 on the first post?
Please help me out: shall I get an brass plate??
I will use either linear vintage mx blacks or tactile mx clears/browns
an brass plate is
extra 20$ btw
I think the question should be "Are there any brass plates/weights left to order?"
There are a few brass plates for tx75
No brass weight bar for tx75
Just got my board ;D Thanks kin and yuksti!Show Image(http://i.imgur.com/WGqo6R1.jpg)
Just got my board ;D Thanks kin and yuksti!Show Image(http://i.imgur.com/WGqo6R1.jpg)
Call your local customs office and ask there.
This is what it looks like when one of my shipments was delivered to the customs office directly.
Customs office should be open tomorrow ... just call ahead to get the pickup-number and then get there to collect. Or wait 2-3 days for the notification ;)
There should only be one customs office for your address.
It's beautiful. Thanks kin and yuktsi! :thumb:
(Attachment Link)
It's beautiful. Thanks kin and yuktsi! :thumb:
(Attachment Link)
Welcome to BRASS PLATE WORLD.
It's beautiful. Thanks kin and yuktsi! :thumb: Packaging was fantastic too.this case is silver?
(Attachment Link)
It's a gray one, guess the room was a bit bright when I took a shot. :)
Kin, it looks like a dream to me, light grey is a fantastic color choice!It's a gray one, guess the room was a bit bright when I took a shot. :)
It is my fault.
I like light grey more than dark grey.
So I made light grey kbd.
I received mine today. Super fast shipping for being sent in the middle of holiday season and for the first time I didn't have to pay any customs fee!!(?) EMS is by far the best.
As many already have mentioned, the packaging was just awsome. You can really see a lot of thought and care has been put in to it. Simply awsome unboxing experience.
The light gray colour that I ordered has exceeded my expectations. Really beautiful! The texture from the anodised process is a bit different what I am used to and absolutely nothing negative. As a matter of fact, I love the feel of it. Oh how I wish I could get more TX boards with that grey colour.
I guess what I am trying to say is a big THANK YOU to kin25 and yuktsi for making this work of art available to me. Thank you!Show Image(http://uploads.tapatalk-cdn.com/20161228/454de84746cd90be040e74535096397c.jpg)Show Image(http://uploads.tapatalk-cdn.com/20161228/97c554f1f51b5605d54b64b8e8ea5384.jpg)Show Image(http://uploads.tapatalk-cdn.com/20161228/13beb8eec402670364e503fac79110dd.jpg)Show Image(http://uploads.tapatalk-cdn.com/20161228/03f56d4e3210fbf1284397180e70947d.jpg)Show Image(http://uploads.tapatalk-cdn.com/20161228/14d8d76ce8b6b48b3c5d4b82f2a4cff2.jpg)Show Image(http://uploads.tapatalk-cdn.com/20161228/903ced5a36deb51198e7a04d3efa014d.jpg)
I received mine today. Super fast shipping for being sent in the middle of holiday season and for the first time I didn't have to pay any customs fee!!(?) 😁 EMS is by far the best.
As many already have mentioned, the packaging was just awsome. You can really see a lot of thought and care has been put in to it. Simply awsome unboxing experience.
The light gray colour that I ordered has exceeded my expectations. Really beautiful! The texture from the anodised process is a bit different what I am used to and absolutely nothing negative. As a matter of fact, I love the feel of it. Oh how I wish I could get more TX boards with that grey colour.
I guess what I am trying to say is a big THANK YOU to kin25 and yuktsi for making this work of art available to me. Thank you!Show Image(http://uploads.tapatalk-cdn.com/20161228/454de84746cd90be040e74535096397c.jpg)Show Image(http://uploads.tapatalk-cdn.com/20161228/97c554f1f51b5605d54b64b8e8ea5384.jpg)Show Image(http://uploads.tapatalk-cdn.com/20161228/13beb8eec402670364e503fac79110dd.jpg)Show Image(http://uploads.tapatalk-cdn.com/20161228/03f56d4e3210fbf1284397180e70947d.jpg)Show Image(http://uploads.tapatalk-cdn.com/20161228/14d8d76ce8b6b48b3c5d4b82f2a4cff2.jpg)Show Image(http://uploads.tapatalk-cdn.com/20161228/903ced5a36deb51198e7a04d3efa014d.jpg)
It is hard not to agree.I received mine today. Super fast shipping for being sent in the middle of holiday season and for the first time I didn't have to pay any customs fee!!(?) EMS is by far the best.
As many already have mentioned, the packaging was just awsome. You can really see a lot of thought and care has been put in to it. Simply awsome unboxing experience.
The light gray colour that I ordered has exceeded my expectations. Really beautiful! The texture from the anodised process is a bit different what I am used to and absolutely nothing negative. As a matter of fact, I love the feel of it. Oh how I wish I could get more TX boards with that grey colour.
I guess what I am trying to say is a big THANK YOU to kin25 and yuktsi for making this work of art available to me. Thank you!Show Image(http://uploads.tapatalk-cdn.com/20161228/454de84746cd90be040e74535096397c.jpg)Show Image(http://uploads.tapatalk-cdn.com/20161228/97c554f1f51b5605d54b64b8e8ea5384.jpg)Show Image(http://uploads.tapatalk-cdn.com/20161228/13beb8eec402670364e503fac79110dd.jpg)Show Image(http://uploads.tapatalk-cdn.com/20161228/03f56d4e3210fbf1284397180e70947d.jpg)Show Image(http://uploads.tapatalk-cdn.com/20161228/14d8d76ce8b6b48b3c5d4b82f2a4cff2.jpg)Show Image(http://uploads.tapatalk-cdn.com/20161228/903ced5a36deb51198e7a04d3efa014d.jpg)
I love that gray!
I saw updated list of yuksi.
jal (GH)
[...]
Some colors lack extra.
Plz contact with me by telegram.
Id : kin25
I saw updated list of yuksi.
jal (GH)
[...]
Some colors lack extra.
Plz contact with me by telegram.
Id : kin25
1) Whoo-hoo! Can't wait!
2) Moron alert: I'm confused about Telegram. I downloaded the iPhone app called 'Telegram Messenger' - is that the right one? It seems to use telephone numbers to contact people, not user IDs. I tried creating a contact with just 'kin25', but it wants a number. If it is the right app, what am I doing wrong? Sorry - I don't normally use instant messaging apps and don't keep up with how they all work. Please use little words.
Kind of new to the world of Kustoms and I'm wondering... How many of you guys had troubles with customs and the shipment? I'm seeing some situations here and I was hoping to get a general idea
Kind of new to the world of Kustoms and I'm wondering... How many of you guys had troubles with customs and the shipment? I'm seeing some situations here and I was hoping to get a general idea
It mostly depends on your country. It may depend on the specific two countries involved; international trade is complicated. In specific cases, if someone declares an obviously bogus value, it may cause a problem. Personally, for me in the U.S., I've had zero problems with expensive things coming from Korea, China, Australia, Germany, Norway and probably others I'm forgetting. This may change in the US after January 20th, but who knows. Depending on where you are, I'd suggest asking someone local for their experiences.
Hope this helps, at least a little.
Pretty sure you can just add kin25 as a contact. That's what I did at least (Android S7). Easiest method to contact any GB/Vendor sale provider I've encountered. Part of it probably goes to kin just being responsive.
His support is amazing. Very upfront and helpful with details, and sends you plenty of pictures of what you're buying and shows you the package before sending it out.Pretty sure you can just add kin25 as a contact. That's what I did at least (Android S7). Easiest method to contact any GB/Vendor sale provider I've encountered. Part of it probably goes to kin just being responsive.
Thanks. I think I figured it out. Using the add contact screen wouldn't work - really wanted a phone number, but starting a conversation, and searching for kin seems to work.
...and kin is typing at me now. Thanks again!
His support is amazing. Very upfront and helpful with details, and sends you plenty of pictures of what you're buying and shows you the package before sending it out.
Just to clarify, is the bottom row, 1.25x, 1.25x, 1.25x, 6.25x, 1.5x, 1.5x, 1u, 1u, 1u?You can do a few different bottom rows. That one does work though.
Just to clarify, is the bottom row, 1.25x, 1.25x, 1.25x, 6.25x, 1.5x, 1.5x, 1u, 1u, 1u?You can do a few different bottom rows. That one does work though.
Well all these will work http://i.imgur.com/cPs89cB.png.
Oh... Is there a definitive list of the layouts or will I just have to play it by ear and just try them out?
Sent from my iPhone using Tapatalk
Well all these will work http://i.imgur.com/cPs89cB.png.
Oh... Is there a definitive list of the layouts or will I just have to play it by ear and just try them out?
Sent from my iPhone using Tapatalk
The tx75 has support for split spacebar in addition to those.
You may refer to the LZ-SQ interest check thread. The bottom row is the same.Just to clarify, is the bottom row, 1.25x, 1.25x, 1.25x, 6.25x, 1.5x, 1.5x, 1u, 1u, 1u?You can do a few different bottom rows. That one does work though.
Oh... Is there a definitive list of the layouts or will I just have to play it by ear and just try them out?
Sent from my iPhone using Tapatalk
I picked my TX87 and TXPad up from the customs office today. The packaging is AMAZING... can't wait to build it :D . Man I can't get over the packaging it was sooo professional.Glad you got it :thumb:
I'll post pics later :thumb:
I picked my TX87 and TXPad up from the customs office today. The packaging is AMAZING... can't wait to build it :D . Man I can't get over the packaging it was sooo professional.
I'll post pics later :thumb:
everyone received theirs accept for me. I is sad.
Ki please ship my tx75, I have no keyboard to use now.
:'(
I got mine as well! The blue is am amazing colour! Thanks kin for getting me pictures with the brass to show how good it looked! He definitely wasn't kidding when he said you should use two hands, remember to bend at the knees too cause that's how solid this thing is. it definitely surprised my post office guy when he tried to bring my package out!Looks normal to me since it's not surface treated.
Unfortunately it looks like there were scratch marks or imperfections on the ss plate. How does one go about fixing it? Should I sand it down then polish or what should I do
Got bored of all my boards. I NEED the TX75.everyone received theirs accept for me. I is sad.
Ki please ship my tx75, I have no keyboard to use now.
:'(
No proto 910s, Janes, or even your VE.As?
everyone received theirs accept for me. I is sad.
Ki please ship my tx75, I have no keyboard to use now.
:'(
(http://www.reactiongifs.com/wp-content/gallery/no/754.gif)everyone received theirs accept for me. I is sad.
Ki please ship my tx75, I have no keyboard to use now.
:'(
I know you are the most patient in the world.
You can wait for tx75 in whole your life.
I can send yours ASAP in next life.
Got bored of all my boards. I NEED the TX75.everyone received theirs accept for me. I is sad.
Ki please ship my tx75, I have no keyboard to use now.
:'(
No proto 910s, Janes, or even your VE.As?
Btw, has anyone tried the keyboard of the latest MacBook Pro? The 'thock' sounds really good
I got mine as well! The blue is am amazing colour! Thanks kin for getting me pictures with the brass to show how good it looked! He definitely wasn't kidding when he said you should use two hands, remember to bend at the knees too cause that's how solid this thing is. it definitely surprised my post office guy when he tried to bring my package out!Looks normal to me since it's not surface treated.
Unfortunately it looks like there were scratch marks or imperfections on the ss plate. How does one go about fixing it? Should I sand it down then polish or what should I do
These are not mass produced board, some flaws should be expected.
Is that the steel or brass plate? :-\Got bored of all my boards. I NEED the TX75.everyone received theirs accept for me. I is sad.
Ki please ship my tx75, I have no keyboard to use now.
:'(
No proto 910s, Janes, or even your VE.As?
Btw, has anyone tried the keyboard of the latest MacBook Pro? The 'thock' sounds really good
Dumb question, what do I use to reprogram the board?
Thanks! My switches are finally arriving so I'll probably get around to building this over the weekend :)Dumb question, what do I use to reprogram the board?
Jigon
Hahaha! Now I'm curious, what color did you end up getting Yuktsi?everyone received theirs accept for me. I is sad.
Ki please ship my tx75, I have no keyboard to use now.
:'(
I know you are the most patient in the world.
You can wait for tx75 in whole your life.
I can send yours ASAP in next life.Show Image(http://www.reactiongifs.com/wp-content/gallery/no/754.gif)
Show Image(http://i.imgur.com/QNYW43u.jpg)
Here's an album of an assembled gold Tx-75 with brass plate, gateron blacks, sprit stabs, and GMK Carbon.
http://imgur.com/a/oxIAV (http://imgur.com/a/oxIAV)
This board's on sale btw, if any buyer from US wants an assembled board. Not trying to make profit off it, just received the wrong color :p
Show Image(http://i.imgur.com/QNYW43u.jpg)
Here's an album of an assembled gold Tx-75 with brass plate, gateron blacks, sprit stabs, and GMK Carbon.
http://imgur.com/a/oxIAV (http://imgur.com/a/oxIAV)
This board's on sale btw, if any buyer from US wants an assembled board. Not trying to make profit off it, just received the wrong color :p
nice man!Show Image(http://i.imgur.com/QNYW43u.jpg)
Here's an album of an assembled gold Tx-75 with brass plate, gateron blacks, sprit stabs, and GMK Carbon.
http://imgur.com/a/oxIAV (http://imgur.com/a/oxIAV)
This board's on sale btw, if any buyer from US wants an assembled board. Not trying to make profit off it, just received the wrong color
Show Image(http://i.imgur.com/QNYW43u.jpg)
Here's an album of an assembled gold Tx-75 with brass plate, gateron blacks, sprit stabs, and GMK Carbon.
http://imgur.com/a/oxIAV (http://imgur.com/a/oxIAV)
This board's on sale btw, if any buyer from US wants an assembled board. Not trying to make profit off it, just received the wrong color :p
I don't know bro. Ki will surprise me. :pHahaha! Now I'm curious, what color did you end up getting Yuktsi?everyone received theirs accept for me. I is sad.
Ki please ship my tx75, I have no keyboard to use now.
:'(
I know you are the most patient in the world.
You can wait for tx75 in whole your life.
I can send yours ASAP in next life.Show Image(http://www.reactiongifs.com/wp-content/gallery/no/754.gif)
Sent from my SM-G935F using Tapatalk
I don't know bro. Ki will surprise me. :pHahaha! Now I'm curious, what color did you end up getting Yuktsi?everyone received theirs accept for me. I is sad.
Ki please ship my tx75, I have no keyboard to use now.
:'(
I know you are the most patient in the world.
You can wait for tx75 in whole your life.
I can send yours ASAP in next life.Show Image(http://www.reactiongifs.com/wp-content/gallery/no/754.gif)
Sent from my SM-G935F using Tapatalk
I don't know bro. Ki will surprise me. :pHahaha! Now I'm curious, what color did you end up getting Yuktsi?everyone received theirs accept for me. I is sad.
Ki please ship my tx75, I have no keyboard to use now.
:'(
I know you are the most patient in the world.
You can wait for tx75 in whole your life.
I can send yours ASAP in next life.Show Image(http://www.reactiongifs.com/wp-content/gallery/no/754.gif)
Sent from my SM-G935F using Tapatalk
I don't know either. What color shall I send to Yuktsi?
I don't know bro. Ki will surprise me. :pHahaha! Now I'm curious, what color did you end up getting Yuktsi?everyone received theirs accept for me. I is sad.
Ki please ship my tx75, I have no keyboard to use now.
:'(
I know you are the most patient in the world.
You can wait for tx75 in whole your life.
I can send yours ASAP in next life.Show Image(http://www.reactiongifs.com/wp-content/gallery/no/754.gif)
Sent from my SM-G935F using Tapatalk
I don't know either. What color shall I send to Yuktsi?
I think he should get pink!
I don't know bro. Ki will surprise me. :pHahaha! Now I'm curious, what color did you end up getting Yuktsi?everyone received theirs accept for me. I is sad.
Ki please ship my tx75, I have no keyboard to use now.
:'(
I know you are the most patient in the world.
You can wait for tx75 in whole your life.
I can send yours ASAP in next life.Show Image(http://www.reactiongifs.com/wp-content/gallery/no/754.gif)
Sent from my SM-G935F using Tapatalk
I don't know either. What color shall I send to Yuktsi?
(Attachment Link)
For some reason getting mod switches to snap into the plate correctly took forever.(I also accidently put left control in the wrong spot... fixed that now though)Didn't have any issues when I tried other switches.
(Attachment Link)
It's going to take me a while to get used to using the right spacebar for backspace.
For some reason getting mod switches to snap into the plate correctly took forever.
They definitely feel different from Zealios, gonna have to use if for a while before I decide if I like it better or not, and I need to decide if I want to lube the switches or not. My first impression is that the bump feels more sudden on the mod switches.For some reason getting mod switches to snap into the plate correctly took forever.
She's a beaut! Debating split space too... thanks for posting pics and initial thoughts on that layout.
What's your take on the MODs so far?
Dumb question, what do I use to reprogram the board?
Jigon
Dumb question, what do I use to reprogram the board?
Jigon
Speaking of Jigon, does anyone have any advice on disabling the PCB underlighting? I can't seem to get it to turn off.
Dumb question, what do I use to reprogram the board?
Jigon
Speaking of Jigon, does anyone have any advice on disabling the PCB underlighting? I can't seem to get it to turn off.
I believe the only way is to turn all the lights black
Sorry if this is slightly off topic, I wasn't sure which TX thread to post in...Just message him on Telegram. He'll show you everything he has available for each kind of board and is very prompt and helpful.
kin25,
Are you accepting requests/orders for keyboards other than the tx75 right now? If so, is there any way I can get a list of keyboards and colours that are available?
Thanks.
Dumb question, what do I use to reprogram the board?
Jigon
Speaking of Jigon, does anyone have any advice on disabling the PCB underlighting? I can't seem to get it to turn off.
I believe the only way is to turn all the lights black
Dumb question, what do I use to reprogram the board?
Jigon
Speaking of Jigon, does anyone have any advice on disabling the PCB underlighting? I can't seem to get it to turn off.
I believe the only way is to turn all the lights black
Sounds like it would make sense. I'll give it a try. Thanks!
Is there a way to reprogram the keys on MacOS?
No problem! I'll just borrow my wife's PCIs there a way to reprogram the keys on MacOS?
Sorry.. In macos.. It is not possible to reprogram.
Happy New Year with TX kbds. :) :)
Happy New Year with TX kbds. :) :)
Thank you for everything, kin25! I will happily be spending part of my New Years Day building my TX boards. Really appreciate the great communication, excellent packing, quick shipping and most of all impeccable quality of these boards. Happy New Year!
Is there a way to reprogram the keys on MacOS?
Sorry.. In macos.. It is not possible to reprogram.
OK, forgive me as I am new to the forum world of keyboards.No worries, this buy is different from any other buy I've been in. Just talk with kin directly. Download the Telegram program and look for kin25, and talk to him on there.
How exactly do I get in on this buy?
OK, forgive me as I am new to the forum world of keyboards.No worries, this buy is different from any other buy I've been in. Just talk with kin directly. Download the Telegram program and look for kin25, and talk to him on there.
How exactly do I get in on this buy?
He is extremely helpful and informative throughout the process, sending plenty of pictures to show you what exactly your options are and your actual order.
Yes, that is it.OK, forgive me as I am new to the forum world of keyboards.No worries, this buy is different from any other buy I've been in. Just talk with kin directly. Download the Telegram program and look for kin25, and talk to him on there.
How exactly do I get in on this buy?
He is extremely helpful and informative throughout the process, sending plenty of pictures to show you what exactly your options are and your actual order.
Telgram IM software?
Just picked up my board today, it's great. As everyone else stated the packing is near impenetrable from any reasonable impact.
A word of advice to any future purchasers: get a brass plate if there are any left, they are amazing.
Just picked up my board today, it's great. As everyone else stated the packing is near impenetrable from any reasonable impact.
A word of advice to any future purchasers: get a brass plate if there are any left, they are amazing.
Awesome to hear!
What switch did you go with on the brass plate... linears or tactile?
Came back home from vacation Friday night, had the order shipped to my office last week, so I slipped in today to pick it up because I could not wait for tomorrow!
Full photos with comments here: http://imgur.com/a/AgHcE
Thanks, kin25, for your excellent communication, service, and packing, so I could enjoy a wonderful Kinmas today!
Given how rare it seems to be to find a green anodized case, I couldn't say no. Plus, I've got GMK TA Royal Alpha coming, so that is a perfect pairing.Came back home from vacation Friday night, had the order shipped to my office last week, so I slipped in today to pick it up because I could not wait for tomorrow!
Full photos with comments here: http://imgur.com/a/AgHcE
Thanks, kin25, for your excellent communication, service, and packing, so I could enjoy a wonderful Kinmas today!
Wow- Merry Kinmass indeed!! They are all gorgeous man, congrats. But oh, that green. Mmmm, mmmm- delicious!!!
Given how rare it seems to be to find a green anodized case, I couldn't say no. Plus, I've got GMK TA Royal Alpha coming, so that is a perfect pairing.Came back home from vacation Friday night, had the order shipped to my office last week, so I slipped in today to pick it up because I could not wait for tomorrow!
Full photos with comments here: http://imgur.com/a/AgHcE
Thanks, kin25, for your excellent communication, service, and packing, so I could enjoy a wonderful Kinmas today!
Wow- Merry Kinmass indeed!! They are all gorgeous man, congrats. But oh, that green. Mmmm, mmmm- delicious!!!
Thanks man! Yeah, it was just some family stuff stressing me out then, but things have gotten better. This has definitely been a great start to the year.Given how rare it seems to be to find a green anodized case, I couldn't say no. Plus, I've got GMK TA Royal Alpha coming, so that is a perfect pairing.Came back home from vacation Friday night, had the order shipped to my office last week, so I slipped in today to pick it up because I could not wait for tomorrow!
Full photos with comments here: http://imgur.com/a/AgHcE
Thanks, kin25, for your excellent communication, service, and packing, so I could enjoy a wonderful Kinmas today!
Wow- Merry Kinmass indeed!! They are all gorgeous man, congrats. But oh, that green. Mmmm, mmmm- delicious!!!
Royal Alpha will be lovely on there. Good call.
Just read your post on r/mk too. Sorry Christmas was a a bit of a bummer. Holidays can be tough. Know we're all strangers-ish... but reach out anytime if nerding out about keyboards or just shooting the $&it would help. :) And I hope that adding these three to your fam started 2017 out like a frigging champ.
Came back home from vacation Friday night, had the order shipped to my office last week, so I slipped in today to pick it up because I could not wait for tomorrow!
Full photos with comments here: http://imgur.com/a/AgHcE
Thanks, kin25, for your excellent communication, service, and packing, so I could enjoy a wonderful Kinmas today!
Came back home from vacation Friday night, had the order shipped to my office last week, so I slipped in today to pick it up because I could not wait for tomorrow!
Full photos with comments here: http://imgur.com/a/AgHcE
Thanks, kin25, for your excellent communication, service, and packing, so I could enjoy a wonderful Kinmas today!
I put my GMK Skeletor set on it to make it the most obnoxious board I own, AND I LOVE IT.
I just made a quick album of my unboxing experience, sadly a few pictures of the TXPad ended up being lost.
http://imgur.com/a/IcGsy
I already built the board with 67g R4 Zealios and made the TXPad hotswappable, currently it uses Cherry Blacks with 72g springs. I put my GMK Skeletor set on it to make it the most obnoxious board I own, AND I LOVE IT. I'll probably try getting my hands on a set of Troubled Minds SA, I hope I find one for an acceptable price that isn't gone in less than 2 minutes :(
Now back to the board, I know everyone already said it often enough, but IT IS A TANK, I'm not even remotely kidding. I thought my Duck Black Bird is a heavy keyboard, but this... is just insane.
The packaging was insanely professional (like you can see in the album) and I loved the small touches that made this feel so personal, like the dyesub caps and the switch films, the keyboard pads or just the extra diodes and resistors, I wished everyone did it like this, that would be awesome.
There is only one thing I didn't really like about this, and that is that the PCB has slightly higher inputlag compared to the 32u2/32u4 based ones I own. It's nowhere near as ridiculous as my VE.A, which is probably at least 30-40ms late. It's more in the range of 10ms, which really does not affect anyone that isn't playing rhythm games and used to the lower latency of 32u2/32u4 based boards. Sadly I fall into this category, so I have to switch boards before playing. It's not a big deal, because the board is awesome in every other way, maybe one day Leeku will release a fix for this and even if he doesn't this is still an awesome board.
Thank you so much Kin25 for giving me the opportunity to buy one of these. You can really see how much work went into these other than just design.
Came back home from vacation Friday night, had the order shipped to my office last week, so I slipped in today to pick it up because I could not wait for tomorrow!
Full photos with comments here: http://imgur.com/a/AgHcE
Thanks, kin25, for your excellent communication, service, and packing, so I could enjoy a wonderful Kinmas today!
Wow thanks for your pics and mentions. :)
I just made a quick album of my unboxing experience, sadly a few pictures of the TXPad ended up being lost.
http://imgur.com/a/IcGsy
Came back home from vacation Friday night, had the order shipped to my office last week, so I slipped in today to pick it up because I could not wait for tomorrow!
Full photos with comments here: http://imgur.com/a/AgHcE
Thanks, kin25, for your excellent communication, service, and packing, so I could enjoy a wonderful Kinmas today!
oooo that green looks so good :thumb:
Received my TX-CP today. As everyone else has said previously; amazing packaging, super fast delivery, great service all round. Oh and it's super heavy and the quality is staggering, thank you so much Kin =].Congrats on your new weapon. Use it well.
Received my TX-CP today. As everyone else has said previously; amazing packaging, super fast delivery, great service all round. Oh and it's super heavy and the quality is staggering, thank you so much Kin =].Congrats on your new weapon. Use it well.
Hello Kin25,
thought I just ask:
Any plans for a TX96?
Absolutly in love with the quality and look of your Keyboards,
but currently just looking for a Board with the 96-Layout (For example the ZZ96 https://i.imgur.com/o2LCH2v.jpg (https://i.imgur.com/o2LCH2v.jpg))
Kind regards,
diiiP
Hello Kin25,
thought I just ask:
Any plans for a TX96?
Absolutly in love with the quality and look of your Keyboards,
but currently just looking for a Board with the 96-Layout (For example the ZZ96 https://i.imgur.com/o2LCH2v.jpg (https://i.imgur.com/o2LCH2v.jpg))
Kind regards,
diiiP
That already exists, it's called the TX-CP
Hello Kin25,
thought I just ask:
Any plans for a TX96?
Absolutly in love with the quality and look of your Keyboards,
but currently just looking for a Board with the 96-Layout (For example the ZZ96 https://i.imgur.com/o2LCH2v.jpg (https://i.imgur.com/o2LCH2v.jpg))
Kind regards,
diiiP
That already exists, it's called the TX-CP
I know :)
The difference between the 1800 (TX-CP) and 96 layout is pretty small,
but too reach my personal "endgame" I really would love a dedicated 96.
Hello~
I want to sell tx84 and txpad GREEN SET.
I sold these set to an american.
He received them.
But he was not satisfied with them.
so he wanted to restock and refund.
He wanted to pay all cost of restock, but I think it is not fair.
I think his fault is not much as the cost.
If someone who live in America buy these set, we would not need to spend shipping cost.
The buyer can receive quickly, don't need to worry about custom problem.
The seller and I can save money as well.
It is good for all of us.
the reason of his claim is not a big problem of tx84.
it is a bolt hole scratch.
it is made by wire hook of anodizing factory.
all custom kbd have these scratches.
Look at the red arrow mark.
** The package List **
(1) TX84 green case, alu plate, ss plate, 2 pcb.
(2) TXpad green case, alu plate, ss plate, 2 pcb.
** The price **
He paid $697.58(included shipping + paypal fee)
so.. the price of this package is same..
$697.58
I will pay US domestic shipping cost.
** Deal process **
(1) Plz reply under this post. if you want to buy these set.
( at first reply, and plz contact to me by telegram @kin25 )
(2) I will talk with the first reply person. Unless... the second, the third...
(3) I will received money from the buyer.
(4) I will let the seller send these set.
(5) When the buyer receive them and agree...
(6) I will send money to the seller.
I think this is safe method.
(Attachment Link)
Look at the Red Arrow
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
Hello~
I want to sell tx84 and txpad GREEN SET.
If I can switch with my order, I'll take it.They are sold to jal.
If I can switch with my order, I'll take it.They are sold to jal.
Thank you!
If I can switch with my order, I'll take it.They are sold to jal.
Thank you!
Thank you, Kin!
Amazing how smoothly things go when people are as sensible and responsive as you.
Amazing how smoothly things go when people are as sensible and responsive as you.Agreed... and nice score on the green set! It is just freaking gorgeous!! :thumb:
Amazing how smoothly things go when people are as sensible and responsive as you.Agreed... and nice score on the green set! It is just freaking gorgeous!! :thumb:
Thanks. I'd asked Kin (way too late) about it a while back, and of course it was gone. Then I was just catching up on this thread, saw the post, and thought "wow, someone got lucky".
And then realized Kin had posted that at what must have been about the same time I loaded the thread...
now hes just gotta wait for gmk toxic
now hes just gotta wait for gmk toxicGMK TA Royal Alpha and SA Camping are also viable options.
now hes just gotta wait for gmk toxicGMK TA Royal Alpha and SA Camping are also viable options.
Sent from my LG-V20
now hes just gotta wait for gmk toxicGMK TA Royal Alpha and SA Camping are also viable options.
now hes just gotta wait for gmk toxicGMK TA Royal Alpha and SA Camping are also viable options.
Camping never even occurred to me. The earlier pics of Skeletor-on-green reallyscreamedspoke to me, and I was considering looking for Modern Selectric for that black on black subtle look that a distinguished zombie-green demands.
Solid piece of kit. Thanks kin & yuktsi!
I wish Ceresia had a R1 Delete key, but beggars can't be choosers I suppose
(Attachment Link)
Solid piece of kit. Thanks kin & yuktsi!
I wish Ceresia had a R1 Delete key, but beggars can't be choosers I supposeProbably the best tx75 I've seen so far.
(Attachment Link)
Solid piece of kit. Thanks kin & yuktsi!
I wish Ceresia had a R1 Delete key, but beggars can't be choosers I suppose
(Attachment Link)
Solid piece of kit. Thanks kin & yuktsi!
Nice keyset combo! are the alphas JTK?
I wish Ceresia had a R1 Delete key, but beggars can't be choosers I suppose
(Attachment Link)
Solid piece of kit. Thanks kin & yuktsi!
Nice keyset combo! are the alphas JTK?
Looks more like originative WoB
I wish Ceresia had a R1 Delete key, but beggars can't be choosers I suppose
(Attachment Link)
Solid piece of kit. Thanks kin & yuktsi!
The packaging - as everyone else said - is extremely well designed, thanks to his wife.
;D Thanks Kin and Yuktsi!Wow black looks great! Got an album somewhere *scratches neck*
(Attachment Link)
;D Thanks Kin and Yuktsi!wow nice bro!
(Attachment Link)
Temporary caps for now. This keyboard is a dream to type on honestly.Split spacebar :thumb:. Should have gone all out and split the backspace too ;)
Temporary caps for now. This keyboard is a dream to type on honestly.Split spacebar :thumb:. Should have gone all out and split the backspace too ;)
Temporary caps for now.If you sell i' m interested :-X
1. Does the PCB currently support Alps switches?Nope, MX only.
3. How does the typing experience of Plate-to-case mount design (e.g. in TX-75) compare to the more usual PCB-to-case mount design?
I'm not talking about the switch mounting but whether the major stable connection to the case is to the plate itself or to the PCB.
Hi Kin, Hi YukTsi and all the TX users,
I've been lurking this design for a while, as I've been thinking about a 75% end-game board, and this board ranks real high for me.
I have a few questions about the TX boards:
1. Does the PCB currently support Alps switches?
2. What is the pin hole sizes for the PCB of TX-75, are they at 1.5mm similar to Leeku TXPad? I'm looking at the hotswap-compatibility of the PCB to some holtite receptacles.
https://www.reddit.com/r/MechanicalKeyboards/comments/5amslt/guidehotswap_compatibility_table/dc45z0n/
3. How does the typing experience of Plate-to-case mount design (e.g. in TX-75) compare to the more usual PCB-to-case mount design?
I'm not talking about the switch mounting but whether the major stable connection to the case is to the plate itself or to the PCB. I am also aware of that, unlike the usual PCB-to-case mount design, there is no extra standoffs to support the PCB in the middle of the bottom half part of the case.
I asked a couple weeks ago about extras and you had them but Christmas destroyed my wallet. Now that it's healthy again I filled out the form and am praying you have some b stock or something I can buy :(
The once-spurned green-eyed monster schlumphed to my humble abode today. Currently snuffling around suspiciously, hiding in its box and avoiding humans, but I intend to give it a warm, comforting home with some nice switches to chew on very soon.
(Attachment Link)
Thanks again, Kin! Can't wait to build this.
Not sure what telegram is but I'm damn sure gonna try! Thanks for the infoI asked a couple weeks ago about extras and you had them but Christmas destroyed my wallet. Now that it's healthy again I filled out the form and am praying you have some b stock or something I can buy :(
should get at him via telegram at kin25. he's super responsive and you'll get a chance to learn exactly what he has in stock.
Not sure what telegram is but I'm damn sure gonna try! Thanks for the infoI asked a couple weeks ago about extras and you had them but Christmas destroyed my wallet. Now that it's healthy again I filled out the form and am praying you have some b stock or something I can buy :(
should get at him via telegram at kin25. he's super responsive and you'll get a chance to learn exactly what he has in stock.
Oh yea I got a hold of him. Super nice guy. Thank you guys for the info this made my night and I just got a new set of caps today that are going on it! :thumb:Not sure what telegram is but I'm damn sure gonna try! Thanks for the infoI asked a couple weeks ago about extras and you had them but Christmas destroyed my wallet. Now that it's healthy again I filled out the form and am praying you have some b stock or something I can buy :(
should get at him via telegram at kin25. he's super responsive and you'll get a chance to learn exactly what he has in stock.
Can find it at app store (Apple for sure, assume android too). Download and search for Kin25. 30 minutes later your board is waiting for loving boxing. Pics all the way. It's phenomenal.
Little typing test of the TX-75 with ergo clear and Thin PBTIs it brass plate?
http://vocaroo.com/i/s1rU9aVG0An2
Damn you guys were not lieing. After our agreement kin not only had pictures of the board for me but he also had pictures of him packing the thing up nicely in a box. Then he had the shipping label and a tracking number to me 2 hours before I paid him lol. Makes a mfer feel appreciated. Thanks Kin!
Yea it was pretty refreshing. Now just have to wait on the mail...Damn you guys were not lieing. After our agreement kin not only had pictures of the board for me but he also had pictures of him packing the thing up nicely in a box. Then he had the shipping label and a tracking number to me 2 hours before I paid him lol. Makes a mfer feel appreciated. Thanks Kin!
His customer service, quality of work, packaging, and speed is insane. He is a maker that I can get behind.
It goes real fast. I ordered while I was on vacation and it beat me home.Yea it was pretty refreshing. Now just have to wait on the mail...Damn you guys were not lieing. After our agreement kin not only had pictures of the board for me but he also had pictures of him packing the thing up nicely in a box. Then he had the shipping label and a tracking number to me 2 hours before I paid him lol. Makes a mfer feel appreciated. Thanks Kin!
His customer service, quality of work, packaging, and speed is insane. He is a maker that I can get behind.
Yea it was pretty refreshing. Now just have to wait on the mail...Damn you guys were not lieing. After our agreement kin not only had pictures of the board for me but he also had pictures of him packing the thing up nicely in a box. Then he had the shipping label and a tracking number to me 2 hours before I paid him lol. Makes a mfer feel appreciated. Thanks Kin!
His customer service, quality of work, packaging, and speed is insane. He is a maker that I can get behind.
Well that's good news. Just hope the switches beat it here and I'll be good to go.Yea it was pretty refreshing. Now just have to wait on the mail...Damn you guys were not lieing. After our agreement kin not only had pictures of the board for me but he also had pictures of him packing the thing up nicely in a box. Then he had the shipping label and a tracking number to me 2 hours before I paid him lol. Makes a mfer feel appreciated. Thanks Kin!
His customer service, quality of work, packaging, and speed is insane. He is a maker that I can get behind.
Yeah you definitely won't be waiting long. EMS is insanely efficient.
Leeku L3 pcb Jigon manualExcellent, thank you! :thumb:
https://geekhack.org/index.php?topic=83950.msg2236885#msg2236885
People been telling me that top-mounted plate is master race?
But the feeling on the tx is good. Could someone please explain to me?
The distribution of the mounting screws?
Sorry, a beginner question:They basically mean that the plate and pcb are mounted through the plate, rather than through the pcb. If you've seen tray mount 60% cases, those are all connected to the case by screws through the pcb rather than through the plate. TX on the other hand is mounted by screws through the plate.
What is plate top-mounting?
Does it mean that the case has top and bottom parts and the plate is mounted to the top like the TX?
The TX actually also sandwiched the plate between the top and botto half.
Hey guys I need some help. I finally soldered in my switches with sip sockets and when I plug it in to test it, my computer says "USB device not recognized." None of the keys registers. Any clue on how to fix this? Complete noob here when it comes to this just fyi.
Still didn't work unfortunately. Btw, is there a guide somewhere that easy to follow when it comes to firmware stuff and how to flash with them? Like I said, complete noob here when it comes to this.
With Pushing esc, connect the cable..
Update the new firmware..
If i will do.. It will be fixed..
If not.. You had better contact to me via telegram.
Hey Mr.Kin
Any chance for TX84/87 Cyan for international orders?
seem like all of them were only for korean groub buy.
that's sad u know. :'(
Buy more TX Keyboards ... get them while they last:More pics wodan!Show Image(http://i.imgur.com/RdDzqn8.jpg)
More pics wodan!
Show Image(http://i.imgur.com/ME7B1GZ.jpg)Show Image(http://i.imgur.com/cQfq0GL.jpg)Show Image(http://i.imgur.com/mLipKdG.jpg)Show Image(http://i.imgur.com/Wib6Rab.jpg)Show Image(http://i.imgur.com/Y1Xb199.jpg)Show Image(http://i.imgur.com/qPDSoDK.jpg)
Still didn't work unfortunately. Btw, is there a guide somewhere that easy to follow when it comes to firmware stuff and how to flash with them? Like I said, complete noob here when it comes to this.
With Pushing esc, connect the cable..
Update the new firmware..
If i will do.. It will be fixed..
If not.. You had better contact to me via telegram.
More pics wodan!
Gladly :)QuoteShow Image(http://i.imgur.com/ME7B1GZ.jpg)Show Image(http://i.imgur.com/cQfq0GL.jpg)Show Image(http://i.imgur.com/mLipKdG.jpg)Show Image(http://i.imgur.com/Wib6Rab.jpg)Show Image(http://i.imgur.com/Y1Xb199.jpg)Show Image(http://i.imgur.com/qPDSoDK.jpg)
LOL the best source for switch modding films is ...
kin25
I am very happy with them!
Tx84cyan were sold out.
There are a lot tx87cyan.
But most of them are b-stock(blemish)
Well, son of a gun. What can't that guy do...?? Thanks for the info.
Tx84cyan were sold out.
There are a lot tx87cyan.
But most of them are b-stock(blemish)
Glad to know that!
As you said "Most of them", Please let me know if you still have TX87Cyan with perfect condition, I would like to take it. ;D
Tx84cyan were sold out.
There are a lot tx87cyan.
But most of them are b-stock(blemish)
Glad to know that!
As you said "Most of them", Please let me know if you still have TX87Cyan with perfect condition, I would like to take it. ;D
Ok.. I will find perfect tx87cyan.
If I find.. I will let you know
Nice build!
Switch stickers/films: does it make a difference in any aspect of the switch?
Does it feel kind of springy in the middle of the alpha keys, e.g. T, Y, G, H ?
Top-mount seems to be what Korean keyboard designers go for these days. Some other members described top-mount as some nice springiness in the keystroke compared to the tray-mount supported by standoffs in the middle.
Is it an option to get these films CONUS or only really worth the shipping hassle with a TX order?
I would also like the films and a brass plate when kin gets more in (if he gets more in) for my tx-75Is it an option to get these films CONUS or only really worth the shipping hassle with a TX order?
im interested in the films too and an extra plate + pcb so might be worth for me at least.
So I built the Txpad today.I like that green so much. I like the black one I picked but if he makes more green boards one day I want one.
(Attachment Link)
Was planning on doing the 84 as well, but then hit a snag. I'm installing Holtite sockets in these, did the pad first, and then ran out on the 84. This was entirely predictable by any not entirely stupid turnip that had been paying attention, owing to the fact that I only bought 250. Somehow, I failed to think about that. So, need to order more.
(Attachment Link)
Figured this is the board set on which to use the Zeal screw-in stabs.
(Attachment Link)
(Attachment Link)
I adore this thing, and can't wait to get the main board built.
So I built the Txpad today.that wave top row is purrrrrty
(Attachment Link)
I adore this thing, and can't wait to get the main board built.
So I built the Txpad today.I like that green so much. I like the black one I picked but if he makes more green boards one day I want one.
(Attachment Link)
Was planning on doing the 84 as well, but then hit a snag. I'm installing Holtite sockets in these, did the pad first, and then ran out on the 84. This was entirely predictable by any not entirely stupid turnip that had been paying attention, owing to the fact that I only bought 250. Somehow, I failed to think about that. So, need to order more.
(Attachment Link)
Figured this is the board set on which to use the Zeal screw-in stabs.
(Attachment Link)
(Attachment Link)
I adore this thing, and can't wait to get the main board built.
Almost everything (except the key to push to get into flash mode, and some minor stuff) is explained here https://www.dropbox.com/sh/v24vygvyl4mvqrm/AABUNcm0BDioYE5QbArje0Kba?dl=0&preview=Leeku+L3+Software.pdfStill didn't work unfortunately, I've tried multiple usb cables/ports, and a couple of different PCs. Tried holding Esc or U when plugging it in but it still comes up as a unrecognizable device. The only thing it does is have the RGB lighting cycle clockwise and the switch leds turn on after half a minute from plugging it in.
To flash the new firmware you download the latest one, extract it, connect the keyboard while pressing Esc and then run the .bat file. Also try a different USB port and USB cable, I've had wonky stuff happen with half broken cables once.
can you talk about how you went about doing the holtite installation/which holtites you used? i think i want to do something similar... :)
Almost everything (except the key to push to get into flash mode, and some minor stuff) is explained here https://www.dropbox.com/sh/v24vygvyl4mvqrm/AABUNcm0BDioYE5QbArje0Kba?dl=0&preview=Leeku+L3+Software.pdfStill didn't work unfortunately, I've tried multiple usb cables/ports, and a couple of different PCs. Tried holding Esc or U when plugging it in but it still comes up as a unrecognizable device. The only thing it does is have the RGB lighting cycle clockwise and the switch leds turn on after half a minute from plugging it in.
To flash the new firmware you download the latest one, extract it, connect the keyboard while pressing Esc and then run the .bat file. Also try a different USB port and USB cable, I've had wonky stuff happen with half broken cables once.
Will try other PCs and ports to test it out some more.
More TX love for y'all ... Here's the highlights:Show Image(http://i.imgur.com/7u5ijFz.jpg)Show Image(http://i.imgur.com/CFCiekG.jpg)Show Image(http://i.imgur.com/kbvXztj.jpg)
Here's the full log with some comments on the build process:
http://imgur.com/gallery/pFXLv (http://imgur.com/gallery/pFXLv)
Almost everything (except the key to push to get into flash mode, and some minor stuff) is explained here https://www.dropbox.com/sh/v24vygvyl4mvqrm/AABUNcm0BDioYE5QbArje0Kba?dl=0&preview=Leeku+L3+Software.pdfStill didn't work unfortunately, I've tried multiple usb cables/ports, and a couple of different PCs. Tried holding Esc or U when plugging it in but it still comes up as a unrecognizable device. The only thing it does is have the RGB lighting cycle clockwise and the switch leds turn on after half a minute from plugging it in.
To flash the new firmware you download the latest one, extract it, connect the keyboard while pressing Esc and then run the .bat file. Also try a different USB port and USB cable, I've had wonky stuff happen with half broken cables once.
Will try other PCs and ports to test it out some more.
Thank you, I'm waiting here ;)
Thank you, I'm waiting here ;)
I found tx87 cyan.
as you see.. there is a line like ADIDAS in front.
Gap film
Color : black, white, transparent
Quantity : 105~110pc / set
Price : $5
Shipping In envelope by Airmail : $1 (no tracking, 15 days)
I will make google doc..
Plz give me a few days
This is TX Gap Film Order Form.
https://goo.gl/forms/UonCCCsRJCQGFWzH3
Anyone can assist me for the dimension (length x widht x height) in cm for these TX-75 and TX-CP?
Thanks
try connecting the cable with push 'U' keyStill no luck. Now I wonder if I actually messed up any of the soldering job when I did the switches, cause I've tried connecting it to multiple PCs, USB ports and cables with the end result being same "USB Device Not Recognized."
try connecting the cable with push 'U' keyStill no luck. Now I wonder if I actually messed up any of the soldering job when I did the switches, cause I've tried connecting it to multiple PCs, USB ports and cables with the end result being same "USB Device Not Recognized."
Why don't you contact me? :(Oh right, my fault! I probably shouldn't flood the thread with this. I will do that some time tomorrow. :thumb:
More TX love for y'all ... Here's the highlights:Show Image(http://i.imgur.com/7u5ijFz.jpg)Show Image(http://i.imgur.com/CFCiekG.jpg)Show Image(http://i.imgur.com/kbvXztj.jpg)
Here's the full log with some comments on the build process:
http://imgur.com/gallery/pFXLv (http://imgur.com/gallery/pFXLv)
Wodan! Why must you do this!
What kind of plate did you get for your TX84 and Numberpad? They both look fantastic!
Noob question here... What are switch gap films? :)
Because I hate switch stickers.Hi kin, can non-tx ppl buy those films :)
It took 2 hours to put them into switches.
So I made them. :)
Because I hate switch stickers.PC films make life so easy ;D
It took 2 hours to put them into switches.
So I made them. :)
Because I hate switch stickers.Hi kin, can non-tx ppl buy those films :)
It took 2 hours to put them into switches.
So I made them. :)
I submitted entry but still no response!
Ah, now I know what those are (I think). I wonder how they feel/improve Zealios.Because I hate switch stickers.PC films make life so easy ;D
It took 2 hours to put them into switches.
So I made them. :)
Ah, now I know what those are (I think). I wonder how they feel/improve Zealios.Because I hate switch stickers.PC films make life so easy ;D
It took 2 hours to put them into switches.
So I made them. :)
Show Image(http://i.imgur.com/Sf2yOog.png)
Got bored so made a TX-75 wallpaper ;D
Because I hate switch stickers.Hi kin, can non-tx ppl buy those films :)
It took 2 hours to put them into switches.
So I made them. :)
I submitted entry but still no response!
I will send an invoice tomorrow.
ok I think its time for seal to try to get his hands on one of this TX Keyboard.Just msg kin I bought one last week. He literally packed up the order before I paid . Then once paypal hit he shipped and a few days later I had the board
plz sell
Great! But not sure everyone wants their home address posted on the internet.
(Attachment Link)
Gap film envelopes before going to post office..
Could I have a link to the latest Jigon fw? Just finished my TX 84 build:Show Image(http://i.imgur.com/9XbVGNl.jpg)
Will do, thank you Rem-chan.Could I have a link to the latest Jigon fw? Just finished my TX 84 build:Show Image(http://i.imgur.com/9XbVGNl.jpg)
http://kbdlab.co.kr/index.php?document_srl=2702787&mid=board_sw
bookmark this
Could I have a link to the latest Jigon fw? Just finished my TX 84 build:Show Image(http://i.imgur.com/9XbVGNl.jpg)
Is this kit still for sale? Looking for an all black one.Install the Telegram messaging program and message kin25. He'll show you what he has and box your purchase live.
Sounds good! Messaged him on telegram last monday though, and havent heard from him yet..Is this kit still for sale? Looking for an all black one.Install the Telegram messaging program and message kin25. He'll show you what he has and box your purchase live.
Sounds good! Messaged him on telegram last monday though, and havent heard from him yet..
Sounds good! Messaged him on telegram last monday though, and havent heard from him yet..Is this kit still for sale? Looking for an all black one.Install the Telegram messaging program and message kin25. He'll show you what he has and box your purchase live.
Sounds good! Messaged him on telegram last monday though, and havent heard from him yet..
I wrote with him just today. He might have missed your message, maybe try him again? Also don't forget that it's +8 hours in Korea (from central Europe).
Sounds good! Messaged him on telegram last monday though, and havent heard from him yet..Is this kit still for sale? Looking for an all black one.Install the Telegram messaging program and message kin25. He'll show you what he has and box your purchase live.Sounds good! Messaged him on telegram last monday though, and havent heard from him yet..
I wrote with him just today. He might have missed your message, maybe try him again? Also don't forget that it's +8 hours in Korea (from central Europe).
Guys some of you may not know this but the Lunar New Year just started so let the man enjoy the New Year Festival with his family for a week or so. It the biggest holiday in Asia :thumb:
Yeah so ive heard. He got back to me today. Getting a black kit, hyped![attachimg=1]
Gap film envelopes before going to post office..
Just paid my invoice!
A little help why is this plate not fitting with zeal stabs?Out of curiosity what was your problem?
Nvm I got it. We good now
Not for a TX board but Zeal stabs have varying insert sizes for the pcb depending on the screw side vs other side, maybe the direction wasn't allowing the plate to sit right on a few of them. Would be my guess.A little help why is this plate not fitting with zeal stabs?Out of curiosity what was your problem?
Nvm I got it. We good now
Wasn't a big deal but somehow I had 2 of the stabs come out when I was screwing them in and the plate wasn't sitting right but with them being clear it was hard to see lolA little help why is this plate not fitting with zeal stabs?Out of curiosity what was your problem?
Nvm I got it. We good now
Sorry.. I have not used zeal stabs.Kin the stabs work just fine. It was my mistake so all is good. :thumb:
I don't know exactly.
If you use them in tx kbds. Before assembling, plz check stabilizers.
I think a little griding plate can solve the problem.
I will check zeal stabs asap.
Sorry.. I have not used zeal stabs.Kin the stabs work just fine. It was my mistake so all is good. :thumb:
I don't know exactly.
If you use them in tx kbds. Before assembling, plz check stabilizers.
I think a little griding plate can solve the problem.
I will check zeal stabs asap.
Sorry.. I have not used zeal stabs.Kin the stabs work just fine. It was my mistake so all is good. :thumb:
I don't know exactly.
If you use them in tx kbds. Before assembling, plz check stabilizers.
I think a little griding plate can solve the problem.
I will check zeal stabs asap.
Really curious on what happened and how you fixed it. I'm thinking of using zeal stabs on my tx-75 as well, so I would like to know that I don't make the same mistake.
Sorry.. I have not used zeal stabs.Kin the stabs work just fine. It was my mistake so all is good. :thumb:
I don't know exactly.
If you use them in tx kbds. Before assembling, plz check stabilizers.
I think a little griding plate can solve the problem.
I will check zeal stabs asap.
Really curious on what happened and how you fixed it. I'm thinking of using zeal stabs on my tx-75 as well, so I would like to know that I don't make the same mistake.
I used zeal stabs on my TX75 and had no issues. Like Tally said, it sounds like he just needed to make a small adjustment to how he had them installed.
My switch films just came in! Thanks, kin!
My switch films just came in! Thanks, kin!That's exciting. Good thing kin's boards allow for switchtop removal :)
My switch films just came in! Thanks, kin!
Post officer said..
It will take 2weeks.
But it took 10 days. :-)
Because this was my first airmail.. I could not know exactly.
Thanks for letting me know.
That's exciting. Good thing kin's boards allow for switchtop removal :)
Unrelated, but are you hyped for March 25th?Of course! :thumb:
My switch films just came in! Thanks, kin!
Post officer said..
It will take 2weeks.
But it took 10 days. :-)
Because this was my first airmail.. I could not know exactly.
Thanks for letting me know.
Thank you for selling these! I figured it would take about 2 weeks, glad to see these arrive safely and in good time.That's exciting. Good thing kin's boards allow for switchtop removal :)
Yeah, I haven't actually assembled my TX kits yet (don't worry, I will soon, just wanted to solder some other kits first for practice!), but I got enough films for a number of builds.
Unrelated, but are you hyped for March 25th?
What happens on March 25th??
My Hero Academia Season 2 starts airing. Saiph's avatar is a character from it.My switch films just came in! Thanks, kin!
Post officer said..
It will take 2weeks.
But it took 10 days. :-)
Because this was my first airmail.. I could not know exactly.
Thanks for letting me know.
Thank you for selling these! I figured it would take about 2 weeks, glad to see these arrive safely and in good time.That's exciting. Good thing kin's boards allow for switchtop removal :)
Yeah, I haven't actually assembled my TX kits yet (don't worry, I will soon, just wanted to solder some other kits first for practice!), but I got enough films for a number of builds.
Unrelated, but are you hyped for March 25th?
What happens on March 25th??
My Hero Academia Season 2 starts airing. Saiph's avatar is a character from it.My switch films just came in! Thanks, kin!
Post officer said..
It will take 2weeks.
But it took 10 days. :-)
Because this was my first airmail.. I could not know exactly.
Thanks for letting me know.
Thank you for selling these! I figured it would take about 2 weeks, glad to see these arrive safely and in good time.That's exciting. Good thing kin's boards allow for switchtop removal :)
Yeah, I haven't actually assembled my TX kits yet (don't worry, I will soon, just wanted to solder some other kits first for practice!), but I got enough films for a number of builds.
Unrelated, but are you hyped for March 25th?
What happens on March 25th??
Sent from my LG-V20
Maybe... In March..Oh yes. This is great news.
A few more... Tx75
Txcp r2
Tx1800 v2
Maybe... In March..Oh yes. This is great news.
A few more... Tx75
Txcp r2
Tx1800 v2
I feel you. I just bumped up my retirement savings contribution and it's suddenly it's raining Kustoms sales.Maybe... In March..Oh yes. This is great news.
A few more... Tx75
Txcp r2
Tx1800 v2
...for my salivary glands; the retirement plan, not so much.
Maybe... In March..Ohh any green?
A few more... Tx75
Txcp r2
Tx1800 v2
I feel you. I just bumped up my retirement savings contribution and it's suddenly it's raining Kustoms sales.Maybe... In March..Oh yes. This is great news.
A few more... Tx75
Txcp r2
Tx1800 v2
...for my salivary glands; the retirement plan, not so much.
I'm just investing in keebs for retirement. That's a thing... right?
Maybe... In March..Ohh any green?
A few more... Tx75
Txcp r2
Tx1800 v2
Maybe... In March..
A few more... Tx75
Txcp r2
Tx1800 v2
Maybe... In March..
A few more... Tx75
Txcp r2
Tx1800 v2
Maybe... In March..
A few more... Tx75
Txcp r2
Tx1800 v2
Are you changing the design in any way, or is it just a second round of the current boards?
:(Maybe... In March..Ohh any green?
A few more... Tx75
Txcp r2
Tx1800 v2
Sorry for no green.
Maybe... In March..
A few more... Tx75
Txcp r2
Tx1800 v2
Are you changing the design in any way, or is it just a second round of the current boards?
Same design round 2
Different design version 2
:(
Ohh looking good kin. Might need another tx board in my future. :thumb: that is a super nice color:(
But tx1800 v2 sample looks almost green.
(Attachment Link)
(Attachment Link)
(Attachment Link)
:(
But tx1800 v2 sample looks almost green.
(Attachment Link)
(Attachment Link)
(Attachment Link)
:(
But tx1800 v2 sample looks almost green.
(Attachment Link)
(Attachment Link)
(Attachment Link)
4300g :-X . By the way, anyone else actually take the ss/brass weights off of their boards?I like my board being in one specific spot :)
I like metal cases, but it's a pain when I occasionally shift my board around.
:(
But tx1800 v2 sample looks almost green.
(Attachment Link)
(Attachment Link)
(Attachment Link)
:(
But tx1800 v2 sample looks almost green.
(Attachment Link)
(Attachment Link)
(Attachment Link)
:(
But tx1800 v2 sample looks almost green.
(Attachment Link)
(Attachment Link)
(Attachment Link)
I never liked 75% until I received this <3ooh I would've loved to mix and match colors. Didn't want to order two of them though hahaShow Image(http://i.imgur.com/u8YBsES.jpg)
I never liked 75% until I received this <3Show Image(http://i.imgur.com/u8YBsES.jpg)
Maybe... In March..
A few more... Tx75
Txcp r2
Tx1800 v2
:(
But tx1800 v2 sample looks almost green.
(Attachment Link)
(Attachment Link)
(Attachment Link)
Tx1800 v2 basic option = brass plate + brass weight bar + case + pcb = $420
Brass weight bar is same with txcp.
Tx1800 v2 basic option = brass plate + brass weight bar + case + pcb = $420
Brass weight bar is same with txcp.
Looks HAWT, Yuktsi!!
Tx1800 v2 basic option = brass plate + brass weight bar + case + pcb = $420
Brass weight bar is same with txcp.
For the love of God let me pre-order. I can't wait until March for the comfort of having paid! TX-75 is my favorite board (brass plate) and I'm very excited at the prospects of acquiring a TX-1800. kin strikes again.
Um... why is this in Artisan Services?
Um... why is this in Artisan Services?
I take it all the TX-75s are gone?
Great pics! Forgot to post mine here :DOhh wow when I mentioned a gmk set I have skeletor and cyan mods coming in the mail lolShow Image(http://i.imgur.com/J74GJ83.jpg)
Rest:
http://imgur.com/gallery/T4E6W (http://imgur.com/gallery/T4E6W)
Any news for TX60?
I take it all the TX-75s are gone?
There are some extra tx75. :-)
Any news for TX60?
Ooooo would love to see an HHKB TX60 ;)
Any news for TX60?
Ooooo would love to see an HHKB TX60 ;)
Freaking yes please. And a 96-ish layout too, perhaps, Kin? :) 60, 75, 84/87, 96 and CP/ 1800. That about gets it covered.
.....or, blow our fragile little minds with something wild and crazy and new this year, Kin. Yep, that would be fun.
I picked up one of these boards secondhand, is there any chance of getting another plate and pcb somewhere? I love the board and thought it would be fun to have another option in switches to swap out when I feel like it.
Thought I would ask here before first before posting anywhere else.
Kin do you have any extra TX87 left? What colours if yes? Thank you!
Kin do you have any extra TX87 left? What colours if yes? Thank you!He did about a week ago when I talked to him on telegram. I'm trying to convince myself I don't need another tx...
Deal with it.Show Image(http://img11.hostingpics.net/pics/783369IMG2939.jpg)
Show Image(http://i.imgur.com/tsMFjMJr.jpg)
http://imgur.com/tsMFjMJ (http://imgur.com/tsMFjMJ)
Show Image(http://i.imgur.com/tsMFjMJr.jpg)
http://imgur.com/tsMFjMJ (http://imgur.com/tsMFjMJ)
It's goldShow Image(http://i.imgur.com/tsMFjMJr.jpg)
http://imgur.com/tsMFjMJ (http://imgur.com/tsMFjMJ)
I can't tell easily because of my monitor. Is that case orange?
Would it be possible to order this board with another anodization color? An orange case would be amazing.
I am still patiently waiting for my grey TX75...it's been a long time. My patience is testing me. :(Sorry.. :-(
Any update on that, kin?
Did I seriously miss this GB because it was in the wrong forum....It wasn't a GB. It was just selling stock.
Why have an interest check for existing stock then?Did I seriously miss this GB because it was in the wrong forum....It wasn't a GB. It was just selling stock.
If you don't want to buy it, plz let me know..
I will refund all money.
I don't like debt.
I am still patiently waiting for my grey TX75...it's been a long time. My patience is testing me. :(Sorry.. :-(
Any update on that, kin?
I am also waiting them.
Everyday I called factory and asked how they were going on..
Now.. They are in anodizing factory.
But it is not the signal of finishing.
In anodizing process All problems happen.
So.. We need more patience.
If you don't want to buy it, plz let me know..
I will refund all money.
I don't like debt.
Those that have assembled their TX-Pad and TX-87... There are a couple of small 4mm M3 screws included. I thought they were supposed to screw down the switch plate to the bottom housing. I however have huge problems with this. It is as the screw holes in the bottom housing are too small for the included screws. I have applied some force but no no avail. I could try to push them down even harder but not ready to do so in fear of slipping and scratching. I aslo think that if more force is applied, the threads will be screwed up.
How did you guys secure your switch plate?
Those that have assembled their TX-Pad and TX-87... There are a couple of small 4mm M3 screws included. I thought they were supposed to screw down the switch plate to the bottom housing. I however have huge problems with this. It is as the screw holes in the bottom housing are too small for the included screws. I have applied some force but no no avail. I could try to push them down even harder but not ready to do so in fear of slipping and scratching. I aslo think that if more force is applied, the threads will be screwed up.
How did you guys secure your switch plate?
Don't use M2.5 bolts.
They are useless.
Those that have assembled their TX-Pad and TX-87... There are a couple of small 4mm M3 screws included. I thought they were supposed to screw down the switch plate to the bottom housing. I however have huge problems with this. It is as the screw holes in the bottom housing are too small for the included screws. I have applied some force but no no avail. I could try to push them down even harder but not ready to do so in fear of slipping and scratching. I aslo think that if more force is applied, the threads will be screwed up.
How did you guys secure your switch plate?
Don't use M2.5 bolts.
They are useless.
Ah, cheers Kin. Since you are online... Just edited my previous post with another question. Mind answering that one too? :)
I am still patiently waiting for my grey TX75...it's been a long time. My patience is testing me. :(Sorry.. :-(
Any update on that, kin?
I am also waiting them.
Everyday I called factory and asked how they were going on..
Now.. They are in anodizing factory.
But it is not the signal of finishing.
In anodizing process All problems happen.
So.. We need more patience.
If you don't want to buy it, plz let me know..
I will refund all money.
I don't like debt.
kin, I would like to cancel and get a refund then. I'll wait for your other boards later. Let me know what I need to do to process the refund.
kin, I would like to cancel and get a refund then. I'll wait for your other boards later. Let me know what I need to do to process the refund.
Good luck with that, I also requested a refund via Telegram on 02/28 and asked about it in this thread on 03/06 and I haven't heard a peep. I will open a dispute in another week or so if nothing happens.
Hey bro, sorry for the delay. There were problems with PayPal. Anyway, I've just refunded you. Have a nice weekend ahead :thumb:kin, I would like to cancel and get a refund then. I'll wait for your other boards later. Let me know what I need to do to process the refund.
Good luck with that, I also requested a refund via Telegram on 02/28 and asked about it in this thread on 03/06 and I haven't heard a peep. I will open a dispute in another week or so if nothing happens.
Hey bro, sorry for the delay. There were problems with PayPal. Anyway, I've just refunded you. Have a nice weekend ahead :thumb:
I am surprised that I've been using the TX75 for awhile now. I didn't like 75%.Hey bro, sorry for the delay. There were problems with PayPal. Anyway, I've just refunded you. Have a nice weekend ahead :thumb:
Thank you. I didn't want to sound mean, but I was wondering about the status. The TX-75 still looks great but since it is taking so long, it's not a GB and there is so much keyboard stuff out there right now I decided to skip it after all. Have a great wekend as well! :thumb:
Any weight measurements? I'd like to know approximately how many KG this board weighs w/ brass weight & plate.In the first page..
In the first page..
The weight of tx75 with brass is 27.3kg
The weight of tx75 with brass is 27.3kg
The weight of tx75 with brass is 27.3kg
Kin25 meant to say the TX75 weighs 2.73 kg with the brass weight, of course if you buy 10... :p
Kin25, do please note me in for a TX1800. Will you setup a google form soon for us to fill in a interest request for the boards and so we can provide you our information?
I ordered factory to make serveral tx75 more.
Factory made them slowly.
Finally factory finished producing.
I am waiting them.
Factory will start producing Txcp and tx1800 v2.
It will take more than 2 months.
Any left in stock?
Any left in stock?
There are many tx87 and txpad.
Some are b.stock which have some scratches (not serious)
Any left in stock?
There are many tx87 and txpad.
Some are b.stock which have some scratches (not serious)
No 75 then? :'( I'll wait for 1800
Any left in stock?
There are many tx87 and txpad.
Some are b.stock which have some scratches (not serious)
Hey kin, I am just wondering if there is any Tx75 still in stock, even is b.stock. If not, would there be any in the upcoming list?He had 2 or 3 left when I spoke to him a few days ago. Hit him up on the Telegram App @Kin25, he'll usually answer quickly there. GL!
Hey kin, I am just wondering if there is any Tx75 still in stock, even is b.stock. If not, would there be any in the upcoming list?He had 2 or 3 left when I spoke to him a few days ago. Hit him up on the Telegram App @Kin25, he'll usually answer quickly there. GL!
Sent from my SM-G935V using Tapatalk
I misspoke, just looked at the messages. It's the TX-CP, not the TX-75, he mentioned. My apologies.Hey kin, I am just wondering if there is any Tx75 still in stock, even is b.stock. If not, would there be any in the upcoming list?He had 2 or 3 left when I spoke to him a few days ago. Hit him up on the Telegram App @Kin25, he'll usually answer quickly there. GL!
Sent from my SM-G935V using Tapatalk
Stock in hand? He told me something different that he was getting extras in from a pre-order either monday or tuesday.
Looking to buy one off Kin, a few questionsIt is fully reprogrammable but the program's name is slipping my name right now, I can find the download link when I get home.
Is the PCB programmable? If so how
ISO fully supported? (ISO enter, split left shift) as well as split backspace?
I'm not sure what layout I want to go with for this one, so I want to keep my options open
Looking to buy one off Kin, a few questionsIt is fully reprogrammable but the program's name is slipping my name right now, I can find the download link when I get home.
Is the PCB programmable? If so how
ISO fully supported? (ISO enter, split left shift) as well as split backspace?
I'm not sure what layout I want to go with for this one, so I want to keep my options open
Edit: Nvm, found it https://www.dropbox.com/sh/v24vygvyl4mvqrm/AABUNcm0BDioYE5QbArje0Kba?dl=0&preview=Leeku+L3+Software.pdf
...
MT(mod, kc) - is mod (modifier key - MOD_LCTL, MOD_LSFT) when held, and kc when tapped. In other words, you can have a key that sends Esc (or the letter O or whatever) when you tap it, but works as a Control key or a Shift key when you hold it down.
...
Sorry if this has been asked already, but is there a way to change the color of the PCBs backlight? Mine is still on the default color lol. Thanks!In the jigon software I believe. That's how I changed mine. Here ya go. https://geekhack.org/index.php?topic=83950.0
Sorry if this has been asked already, but is there a way to change the color of the PCBs backlight? Mine is still on the default color lol. Thanks!In the jigon software I believe. That's how I changed mine. Here ya go. https://geekhack.org/index.php?topic=83950.0
I've also used several boards since my tx-75 came in and I always go back to it as the rest collect dust.
Sent from my SM-G928V using Tapatalk
TX1800v2 Proto
Today new 1800 PCB arrived.
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
TX1800v2 ProtoOh man that's looking real nice!
Today new 1800 PCB arrived.
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
TX1800v2 Proto
Today new 1800 PCB arrived.
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
TX1800v2 Proto
Today new 1800 PCB arrived.
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
Has he said a price yet?
Sent from my SM-G928V using Tapatalk
Has he said a price yet?
Sent from my SM-G928V using Tapatalk
Negative Ghost Rider... Shouldn't be long to offer them up though since proto is looking good. :thumb: Wonder if he's doing a mfg run and then will sell or he'll do it as a standard-operation GB??
Loving the new chamfered top edge. Can't wait to order one.This is proto..
Has he said a price yet?
Sent from my SM-G928V using Tapatalk
Negative Ghost Rider... Shouldn't be long to offer them up though since proto is looking good. :thumb: Wonder if he's doing a mfg run and then will sell or he'll do it as a standard-operation GB??
Should just be a normal sale. In speaking with him awhile ago, PCB's and plates are just about wrapped up and boards will probably be available some time around end of April - mid May. Specific time varying due to me not remember exactly what he said.
I do love that edges.Loving the new chamfered top edge. Can't wait to order one.This is proto..
Chamfer will be changed to rounding.
Oh man that looks clean.
On a side note, where can I find those cyan leds?
Which color is the first sample here: http://txseries.tistory.com/52 ? Is that blue?
Does the PCB come with the 1800v2 kit is pre-soldered with SMDs? only switches and leds to be soldered by self, right?Has he said a price yet?
Sent from my SM-G928V using Tapatalk
Negative Ghost Rider... Shouldn't be long to offer them up though since proto is looking good. :thumb: Wonder if he's doing a mfg run and then will sell or he'll do it as a standard-operation GB??
Should just be a normal sale. In speaking with him awhile ago, PCB's and plates are just about wrapped up and boards will probably be available some time around end of April - mid May. Specific time varying due to me not remember exactly what he said.
Next week..at first Plate s will arrive..
I will take preorders of assembling service.
Tx1800v2 with brass is $420.
Color : black, silver, grey, red, blue.
Assembling service (included all parts) is $130.
(Parts are vintage switches, films, springs, leds, stabilizers, lub and soldering)
Shipping day is 15 May.
Does the PCB come with the 1800v2 kit is pre-soldered with SMDs? only switches and leds to be soldered by self, right?Has he said a price yet?
Sent from my SM-G928V using Tapatalk
Negative Ghost Rider... Shouldn't be long to offer them up though since proto is looking good. :thumb: Wonder if he's doing a mfg run and then will sell or he'll do it as a standard-operation GB??
Should just be a normal sale. In speaking with him awhile ago, PCB's and plates are just about wrapped up and boards will probably be available some time around end of April - mid May. Specific time varying due to me not remember exactly what he said.
Next week..at first Plate s will arrive..
I will take preorders of assembling service.
Tx1800v2 with brass is $420.
Color : black, silver, grey, red, blue.
Assembling service (included all parts) is $130.
(Parts are vintage switches, films, springs, leds, stabilizers, lub and soldering)
Shipping day is 15 May.
Loving the new chamfered top edge. Can't wait to order one.This is proto..
Chamfer will be changed to rounding.
Loving the new chamfered top edge. Can't wait to order one.This is proto..
Chamfer will be changed to rounding.
Will you have photos of the new prototype before you start your sale?
New SMT PCBOh man. That looks nice. Will you do brass plate for this?
(Attachment Link)
New SMT PCBOh man. That looks nice. Will you do brass plate for this?
(Attachment Link)
Sent from my SM-G928V using Tapatalk
Nice! Do your tx-87 brass plate fit in the dolphin too?New SMT PCBOh man. That looks nice. Will you do brass plate for this?
(Attachment Link)
Sent from my SM-G928V using Tapatalk
Of course.. I love brass plate.
Nice! Do your tx-87 brass plate fit in the dolphin too?New SMT PCBOh man. That looks nice. Will you do brass plate for this?
(Attachment Link)
Sent from my SM-G928V using Tapatalk
Of course.. I love brass plate.
Sent from my SM-G928V using Tapatalk
Sorry if this has been asked before: is the acrylic insert necessary or can the board be assembled without it? Also, where will the board be posted for sale, and how can we preorder assembly services if we intend on doing so? Thanks!
Sorry if this has been asked before: is the acrylic insert necessary or can the board be assembled without it? Also, where will the board be posted for sale, and how can we preorder assembly services if we intend on doing so? Thanks!
V2 bottom height become 2mm shorter than V1.
V2 acrylic diffuser is necessary.
If you don't like acrylic diffuser.. You can change them to brass gasket(option).
Sorry if this has been asked before: is the acrylic insert necessary or can the board be assembled without it? Also, where will the board be posted for sale, and how can we preorder assembly services if we intend on doing so? Thanks!
V2 bottom height become 2mm shorter than V1.
V2 acrylic diffuser is necessary.
If you don't like acrylic diffuser.. You can change them to brass gasket(option).
The brass gasket sounds very brilliant! Do you have sample photo? Or will be able to post some soon?
If you don't like acrylic diffuser.. You can change them to brass gasket(option).
If you don't like acrylic diffuser.. You can change them to brass gasket(option).
Why not both? :p
He answered above, light blue
I posted 'TX1800v2 Preorder' in Geekhack GBs & Preorders.
I am waiting for approval of manager.
This is Google Form of TX1800v2 Preorder.
https://goo.gl/forms/eE4YkzpjWKKamIEm2
I posted 'TX1800v2 Preorder' in Geekhack GBs & Preorders.
I am waiting for approval of manager.
This is Google Form of TX1800v2 Preorder.
https://goo.gl/forms/eE4YkzpjWKKamIEm2
Looking at your form:
1. For address, there is a spot for city but not state. Should we put it in as: City, STATE?
2. Does the case come with a SS weight and the selection "Changing Brass Weight" just means the weight will be brass instead of SS for an additional $44?
3. Any pics of the gold plated gasket?
4. Is the ETA for the boards from the manufacturer mid-May?
5. What is this bag?
6. Does the final cost added up on this form include fees?
Thanks! Excited!
What is this Metal Gasket thing?
Some explanation and picture may help... Thank you
Another kinboard! :)I'm sure kin can verify but he is know to use a gold plating on all his brass to prevent oxidation. When people talk about brass plates kin is always mentioned.
A few questions:
- Which are the possible layout options for the bottom left corner? 1.25 1.25 1.25 or 1.5 1.5? It also seems that the PCB has split spacebar support.
- How smooth can we expect the anodization of the case to be? As smooth as TX-84/87?
- Will the brass plates/weight be coated so that they do not oxidize?
- Which kind of stabilizers will be used if ordering an assembled board? Genuine clipped Cherry/GMK?
- Will you do the assembling/soldering yourself?
- Can we order the switches/springs/stickers-film/stabilizers/switch LEDs without the assembling service?
- May we get a picture of the bag?
- How many boards will be available?
Edit: may we also get a full-length picture of the backside of the V2? There aren't any in the TX-1800 tistory website or in the pictures posted a few posts earlier. I am interested in the big slanted shape in the middle, around the USB connector.
(Attachment Link)
About bag
I am making bags for keboards.
outer material is EVA like otd eva case.
inner material is EPE foam.
inner thickness is 2~3cm.
It is for safe shipping, keeping and moving.
factory is making mold of eva outer.
when I will receive prototype of bag, I will show some pics.
(Attachment Link)
(Attachment Link)
(Attachment Link)
zipper handle design. Logo will be bigger.
About Gasket
V2 bottom is 2mm thinner than V1 for diffuser.
but some people don't like diffuser.
so I split diffuser and gasket 8 piece.
you can use diffuser and gasket together.
like 4 conner diffusers and 4 sides metal gaskets
(Attachment Link)
thickness is 3mm.
they are being made... after finishing making.. I will show some pics.
About bag
I am making bags for keboards.
outer material is EVA like otd eva case.
inner material is EPE foam.
inner thickness is 2~3cm.
It is for safe shipping, keeping and moving.
factory is making mold of eva outer.
when I will receive prototype of bag, I will show some pics.
(Attachment Link)
(Attachment Link)
(Attachment Link)
zipper handle design. Logo will be bigger.
Can we add a bag to our pre-order after seeing one?
About Gasket
V2 bottom is 2mm thinner than V1 for diffuser.
but some people don't like diffuser.
so I split diffuser and gasket 8 piece.
you can use diffuser and gasket together.
like 4 conner diffusers and 4 sides metal gaskets
(Attachment Link)
thickness is 3mm.
they are being made... after finishing making.. I will show some pics.
This is way cooler than I was imagining. Interchangeable metal gaskets and diffusers. I love it.
Might be nice to be able to opt in for a full set of eight metal gaskets too to completely replace diffusers? If I'm reading correctly, you get the eight piece acrylic included with the kit, then can add four of the metal corner pieces for $20. Could see some perhaps wanting an all-metal spacer layer...?
Whatever, we'll sort it out. Kin is the man... I'm in.
About Gasket
V2 bottom is 2mm thinner than V1 for diffuser.
but some people don't like diffuser.
so I split diffuser and gasket 8 piece.
you can use diffuser and gasket together.
like 4 conner diffusers and 4 sides metal gaskets
(Attachment Link)
thickness is 3mm.
they are being made... after finishing making.. I will show some pics.
This is way cooler than I was imagining. Interchangeable metal gaskets and diffusers. I love it.
Might be nice to be able to opt in for a full set of eight metal gaskets too to completely replace diffusers? If I'm reading correctly, you get the eight piece acrylic included with the kit, then can add four of the metal corner pieces for $20. Could see some perhaps wanting an all-metal spacer layer...?
Whatever, we'll sort it out. Kin is the man... I'm in.
you can use only arcylic diffuser or only metal gasket.
some will use them together.
It is user's choice.
About Gasket
V2 bottom is 2mm thinner than V1 for diffuser.
but some people don't like diffuser.
so I split diffuser and gasket 8 piece.
you can use diffuser and gasket together.
like 4 conner diffusers and 4 sides metal gaskets
(Attachment Link)
thickness is 3mm.
they are being made... after finishing making.. I will show some pics.
This is way cooler than I was imagining. Interchangeable metal gaskets and diffusers. I love it.
Might be nice to be able to opt in for a full set of eight metal gaskets too to completely replace diffusers? If I'm reading correctly, you get the eight piece acrylic included with the kit, then can add four of the metal corner pieces for $20. Could see some perhaps wanting an all-metal spacer layer...?
Whatever, we'll sort it out. Kin is the man... I'm in.
you can use only arcylic diffuser or only metal gasket.
some will use them together.
It is user's choice.
My bad- sorry. Clearly says 8 piece metal gasket. This is awesome.
thanks kin, i submitted a pre-order. i guess as you update is there a chance for me to make changes (gasket, bag or color of case)? wasn't sure about the color of the grey and the black you were to use for the final product and chose black on the pre-order...
Thanks for these pictures.
If I wanted an extra brass weight (and the SS weight included in the base kit), how much more would that cost?
Thanks for these pictures.
If I wanted an extra brass weight (and the SS weight included in the base kit), how much more would that cost?
Brass weight is $44
Thanks for these pictures.
If I wanted an extra brass weight (and the SS weight included in the base kit), how much more would that cost?
Brass weight is $44
So, it comes as an extra for $44 and does not replace the SS weight included in the base kit?
I am confused by the form which says "Changing brass weight". I am interested in two weights, SS and brass.
Hi!
Ordered a blue one. Do you have extra tops for my tx-87? I would love a purple and red one :)
The TX1800v2 looks great, kin. A bit too big for my tastes but I'm eagerly awaiting TX-CP R2 :)
any render or sneak peak of the cpv2?The TX1800v2 looks great, kin. A bit too big for my tastes but I'm eagerly awaiting TX-CP R2 :)
Txcp R2 are being made with tx1800v2.
So.. Txcp R2 colors are different from v1.
Txcp R2 colors are same with tx1800v2
Black, titan grey, silver, red. (No blue)
Damn I really want a TX1800v2 or TXCP R2. Sucks to see there is no green ano though.There's never green Ano :/ but it is my favorite
any render or sneak peak of the cpv2?The TX1800v2 looks great, kin. A bit too big for my tastes but I'm eagerly awaiting TX-CP R2 :)
Txcp R2 are being made with tx1800v2.
So.. Txcp R2 colors are different from v1.
Txcp R2 colors are same with tx1800v2
Black, titan grey, silver, red. (No blue)
Oh, good point. Didnt notice its r2 instead of v2. Thxany render or sneak peak of the cpv2?The TX1800v2 looks great, kin. A bit too big for my tastes but I'm eagerly awaiting TX-CP R2 :)
Txcp R2 are being made with tx1800v2.
So.. Txcp R2 colors are different from v1.
Txcp R2 colors are same with tx1800v2
Black, titan grey, silver, red. (No blue)
I don't think there is any difference other than the offered colors, hence the 1800 being labeled as "v2" (with some real changes) while the CP is labeled as "R2"
I'm waiting for TX CP R2 :thumb:The TX1800v2 looks great, kin. A bit too big for my tastes but I'm eagerly awaiting TX-CP R2 :)
Txcp R2 are being made with tx1800v2.
So.. Txcp R2 colors are different from v1.
Txcp R2 colors are same with tx1800v2
Black, titan grey, silver, red. (No blue)
Damn I really want a TX1800v2 or TXCP R2. Sucks to see there is no green ano though.
Damn I really want a TX1800v2 or TXCP R2. Sucks to see there is no green ano though.
Factory made a mistake..
Factory made green tx1800v2 top for anodizing test.(Only one top, not bottom)
Damn I really want a TX1800v2 or TXCP R2. Sucks to see there is no green ano though.
Factory made a mistake..
Factory made green tx1800v2 top for anodizing test.(Only one top, not bottom)
Sounds like a factory error in your favor iamtootallforthis
Damn I really want a TX1800v2 or TXCP R2. Sucks to see there is no green ano though.
Factory made a mistake..
Factory made green tx1800v2 top for anodizing test.(Only one top, not bottom)
Sounds like a factory error in your favor iamtootallforthis
I asked factory to make txcp olive color.
But factory made tx1800 green. T..T
I don't know if factory anodize again to other color or keep this.
(Attachment Link)
Damn I really want a TX1800v2 or TXCP R2. Sucks to see there is no green ano though.
Factory made a mistake..
Factory made green tx1800v2 top for anodizing test.(Only one top, not bottom)
Sounds like a factory error in your favor iamtootallforthis
I asked factory to make txcp olive color.
But factory made tx1800 green. T..T
I don't know if factory anodize again to other color or keep this.
(Attachment Link)
Man that green looks pretty good! Get it and put GMK Coniferous on it?
Damn I really want a TX1800v2 or TXCP R2. Sucks to see there is no green ano though.
Factory made a mistake..
Factory made green tx1800v2 top for anodizing test.(Only one top, not bottom)
Sounds like a factory error in your favor iamtootallforthis
I asked factory to make txcp olive color.
But factory made tx1800 green. T..T
I don't know if factory anodize again to other color or keep this.
(Attachment Link)
Damn that is a gorgeous green. I want it.
Are the PCBs compatible with V1? If it is compatible, can I get extra PCBs?
Ordered, in any case.
Are the PCBs compatible with V1? If it is compatible, can I get extra PCBs?
Ordered, in any case.
Comparable.
RGBLed location is different
Are the PCBs compatible with V1? If it is compatible, can I get extra PCBs?
Ordered, in any case.
Comparable.
RGBLed location is different
So it is not compatible?
Another question, the assembling service costs 130 USD? Is that price firm? What are switch choices?
What is the deadline for payment?
TXCP v2 preorder form
https://goo.gl/forms/lENyB836gXwBZOln1
Don't rush... I make many txcp r2.
Deadline for Payment is before shipping. ^^
When you pay, I will start packing and shipping.
Shipping day is 15 May ~ 30 May.
Keyboards are dropping like easter eggs! :)
TXCP v2 preorder form
https://goo.gl/forms/lENyB836gXwBZOln1
Don't rush... I make many txcp r2.
Deadline for Payment is before shipping. ^^
When you pay, I will start packing and shipping.
Shipping day is 15 May ~ 30 May.
TXCP v2 preorder form
https://goo.gl/forms/lENyB836gXwBZOln1
Don't rush... I make many txcp r2.
Deadline for Payment is before shipping. ^^
When you pay, I will start packing and shipping.
Shipping day is 15 May ~ 30 May.
Any chance of getting a TX-75 in olive green? :rolleyes:
Keyboards are dropping like easter eggs! :)P.s. By the way, the title of this thread should be TX-series keyboards instead of just TX-75, which I am after.
Regarding the TXCP v2 pre-order, I just wanted to check that the prices are additive?
Example 1: Brass TXCP $418 + Case $253 + Brass Plate $55 + Brass Weight $44 + PCB $66 + Bag $30 + Shipping USA $75 = $941?
or Example 2: Brass TXCP $418 + Bag $30 + Shipping USA $75 = $523?
Probably a dumb question but I didn't exactly understand the Google form, Thanks!
Regarding the TXCP v2 pre-order, I just wanted to check that the prices are additive?Ex 1)
Example 1: Brass TXCP $418 + Case $253 + Brass Plate $55 + Brass Weight $44 + PCB $66 + Bag $30 + Shipping USA $75 = $941?
or Example 2: Brass TXCP $418 + Bag $30 + Shipping USA $75 = $523?
Probably a dumb question but I didn't exactly understand the Google form, Thanks!
When are invoices going out?
Are the tx-cp v2 parts compatible with v1? Might get an extra pcb, plate, and weight.
Sent from my Pixel XL using Tapatalk
Still no GB thread for TX1800 v2?
Diffuser and gasket.
You can use Diffuser pieces (white) and Metal gasket (yellow) together.
(Attachment Link)
Sorry.. Metal gasket is being made now.
I will receive them on 8 April.
Diffuser and gasket.
You can use Diffuser pieces (white) and Metal gasket (yellow) together.
(Attachment Link)
Sorry.. Metal gasket is being made now.
I will receive them on 8 April.
Diffuser and gasket.
You can use Diffuser pieces (white) and Metal gasket (yellow) together.
(Attachment Link)
Sorry.. Metal gasket is being made now.
I will receive them on 8 April.
Does this mean there will be under glow regardless if you use the gaskets or not? No option to remove all under glow?
8 April ??? Are you going to the past and took it :D
8 April ??? Are you going to the past and took it :D
My mistake.. :(
8 May... factory will send them.
8 April ??? Are you going to the past and took it :D
My mistake.. :(
8 May... factory will send them.
are the gold gasket close in color to the brass plate and brass weight? May have to add brass plate to my order if so...thanks!
8 April ??? Are you going to the past and took it :D
My mistake.. :(
8 May... factory will send them.
are the gold gasket close in color to the brass plate and brass weight? May have to add brass plate to my order if so...thanks!
I think they are a little different.
Can we request SIP sockets for LEDs with the TX-CP R2 assembling service?
Also, which LED colors are available?
Kin will have a new website with support ticket soon. It'll be much easier to communicate with him.
Kin will have a new website with support ticket soon. It'll be much easier to communicate with him.
are those bag and Bag ziper available for purchase separately?
Kin will have a new website with support ticket soon. It'll be much easier to communicate with him.
Are you a prophet?
Kin will have a new website with support ticket soon. It'll be much easier to communicate with him.
Are you a prophet?
Hi Kin, do you still have the TX-75 and TX-Pad in stock?
That's good to know Kin. So it's better to contact you re purchase in May then?Kin will have a new website with support ticket soon. It'll be much easier to communicate with him.
Are you a prophet?
She is helping to make my website.Hi Kin, do you still have the TX-75 and TX-Pad in stock?
Yes.. There are some extras.
But.. Now i am a little busy.
So I have no time to pack and send the order.
The busy works will be ended until April.
Are the invoices for the TX-CPs being sent out yet or just the 1800v2s?
After sitting down and thinking about colors, I couldn't say no to that gray, in for gray TX1800 V2 with brass plate and weight plus gold gaskets! Hope I just barely made it into round 1.
https://geekhack.org/index.php?topic=88916.0
TX1800v2 preorder
Approval !
After sitting down and thinking about colors, I couldn't say no to that gray, in for gray TX1800 V2 with brass plate and weight plus gold gaskets! Hope I just barely made it into round 1.
lol great minds think alike....did the same :cool:
Are the invoices for the TX-CPs being sent out yet or just the 1800v2s?
Sorry.. I sent invoices of tx1800v2 last night.
I will send tx.cp R2 invoices tonight.
https://geekhack.org/index.php?topic=88916.0 (https://geekhack.org/index.php?topic=88916.0)Can't reach, maybe my membership not high enough.
TX1800v2 preorder
Approval !
https://geekhack.org/index.php?topic=88916.0 (https://geekhack.org/index.php?topic=88916.0)Can't reach, maybe my membership not high enough.
TX1800v2 preorder
Approval !
BTW, thx for the sample pic.
Is it possible to buy multiple tops for the TX-CP or are they sold as kits as the TX-1800v2?
Nice, definitely get some bags for my boards. :thumb:are those bag and Bag ziper available for purchase separately?
Yes. Bags for all kind of keyboards will be made..
Received (and payed) my invoice for the TX.CP r2.
Now the waiting begins :thumb:
Just got my invoice for the TX-CP. Is there a set due date, kin?Before shipping..
I think you said payment is due in May?
It seems I made a mistake not choosing any single plate.
Please change my order to include stainless steel plate and update my invoice.
thank you kin :thumb:
TXCP v2 preorder form
https://goo.gl/forms/lENyB836gXwBZOln1
Don't rush... I make many txcp r2.
Deadline for Payment is before shipping. ^^
When you pay, I will start packing and shipping.
Shipping day is 15 May ~ 30 May.
Is there a sample color of Olive?
Sent from my iPhone using Tapatalk
Just ordered a red 1800. I keep ordering keyboards and keycaps at 4:20am. Not on purpose, I just stay up late looking at the screen until I'm too tired to resist anymore. But always make it to 4:20.
I want to see the blue 1800 though... I might change my order. :/
Just ordered a red 1800. I keep ordering keyboards and keycaps at 4:20am. Not on purpose, I just stay up late looking at the screen until I'm too tired to resist anymore. But always make it to 4:20.
I want to see the blue 1800 though... I might change my order. :/
Red → blue?
Ok
Just ordered a red 1800. I keep ordering keyboards and keycaps at 4:20am. Not on purpose, I just stay up late looking at the screen until I'm too tired to resist anymore. But always make it to 4:20.
I want to see the blue 1800 though... I might change my order. :/
Red → blue?
Ok
Please leave it as red for now. I just want to see picture of blue colour!
Just ordered a red 1800. I keep ordering keyboards and keycaps at 4:20am. Not on purpose, I just stay up late looking at the screen until I'm too tired to resist anymore. But always make it to 4:20.
I want to see the blue 1800 though... I might change my order. :/
Red → blue?
Ok
Please leave it as red for now. I just want to see picture of blue colour!
Ok..
Red → Blue → Red → ?
Crap, now I feel like changing colour too. Is there any sample of the titan gray colour?
I am sad there is no purple for TXCP R2 :(
@kin25 - can we switch the top colour for TXCP R2?
Just finished my TX84 last night! Thanks again Kin!Show Image(http://i.imgur.com/Ks7lWM0.jpg)
Grey TX84 with lubed MX Clear, OG Cherry dyesub (with doubleshot right shift)
I've heard it has the worst, or hardest to program PCB's
I was waiting for the Duck Lightsaver v3 but I think I like the layout of the TX-CP with the small gaps better. Does anyone here know how those two keyboards would compare? Or generally how tx keyboards compare to duck?
The main thing I really liked about the Lightsaver originally was the 96 key layout and the new 3 LED strips design. However, now that i've seen this compact 1800 layout I've started leaning towards the TX-CP. Duck seems to have a lot of hype surrounding it but the TX keyboards seem to be pretty low key in comparison. However, I get the feeling that TX is more focused towards the typing experience so might actually be better quality than Duck keyboards. So i was looking for peoples opinions on what they thought: TX vs Duck? Which one do you guys think is better or what are the pros and cons of either in direct comparison to each other. Especially things that you can't really tell just by looking at pictures.
Somebody send me a Duck so i can compare!
I'd love to hear people's thoughts on this too. If i had the cash to spare I'd be all over this, but I really can't justify it as i already have, and am happy with, two TX boards already.
I've heard it has the worst, or hardest to program PCB's
Well, I mean it's not as dumbed down as Jigon or Bootmapper Client which is basically "press a button" "press a key" "hit upload", but come on, compared to TMK/QMK this is a lot easier. Actually, after you installed the correct drivers I think this software is very easy to use with the only difference to the aformentioned alternatives being that you have to bring the board into DFU mode before hitting upload, and well, you have a keymap to work with layed out and don't have to figure out which place in the matrix is supposed to be which key on the board.
Somebody send me a Duck so i can compare!
I'd love to hear people's thoughts on this too. If i had the cash to spare I'd be all over this, but I really can't justify it as i already have, and am happy with, two TX boards already.
I hope this isn't too off-topic, I just built my TX-84 recently, and it's super awesome, the software is easy to figure out (I have used Jigon before to program my MX1800 boards), but does anybody know how to turn off all the RGB LEDs on the back of the PCB? The TX84 chassis is obviously not build for underglow, but the RGB LEDs are blinking and I can just about see the light reflecting through the gaps between the keys, quite distracting for me. In the Jigon main screen, there are options to change the RGB colours and brightness, but I don't see any toggles to turn them off altogether. Can anyone here who has a TX series keyboard chime in and help?
Oh and obligatory picture:Show Image(https://i.imgur.com/M9HVU7L.jpg)
Just ordered TXCP R2 Titan Grey, Brass Plate, Brass Weight. Looking forward to this amazing keyboard!You won't be disappointed, hope you enjoy!
I hope this isn't too off-topic, I just built my TX-84 recently, and it's super awesome, the software is easy to figure out (I have used Jigon before to program my MX1800 boards), but does anybody know how to turn off all the RGB LEDs on the back of the PCB? The TX84 chassis is obviously not build for underglow, but the RGB LEDs are blinking and I can just about see the light reflecting through the gaps between the keys, quite distracting for me. In the Jigon main screen, there are options to change the RGB colours and brightness, but I don't see any toggles to turn them off altogether. Can anyone here who has a TX series keyboard chime in and help?
Oh and obligatory picture:Show Image(https://i.imgur.com/M9HVU7L.jpg)
Here are new Jigon and firmware.
@kin25 - You probably missed this and I should ask you on Telegram but can we switch different colour tops for TXCP?
Here are new Jigon and firmware.
I updated my Jigon to the new version and now I can turn off the RGB LEDs, thanks Kin :thumb:
Paid up for black TX-CP!
I didn't post when I paid, but I paid for my TX-CP. I'm really looking forward to this board!
Thanks again, kin.
Thanks for all the help guys. Reading the comments and the messages from the community members really helped make my decision.
As sexy as the newest iteration of Duck keyboards looked I think I'm going to go with the TX. Reason being is that I prefer the compact 1800 layout of the TX, the HEAVY hefty feel and the fact that it focuses so much on just the typing experience. The main draw for me for the Duck lightsaver was just how awesome it looked whilst still being top quality, especially the 3 diffused LED cutouts on the side. However, I've realised that I usually get bored of that pretty quickly. I always end up turning off any back lit LED on my switches and on the KBD75 that I recently built I've completed stopped using the RGB underglow. The flashy lights are great for pictures and great when you first get it but I get bored of them quickly where as the awesome feeling of the switches I never get tired off. The reason I prefer the 1800 layout is because when I put keycaps of the same colour on my kbd75, it actually got annoyingly difficult to quickly find the correct F1-12 keys if it was one of them in the middle. I think visually splitting them up with colour or with small gap like the TX-CP is massively beneficial. So I think the layout is more ergonomic (less misclicks) as well as the fact that the gaps splitting up the huge chunk of keys make them look more attractive. The brass plate, the extra heft and more intuitive firmware are nice bonuses ;D
Thank god now I don't have to spam F5 out of paranoia for when the Duck Lightsaver gets released.
I didn't post when I paid, but I paid for my TX-CP. I'm really looking forward to this board!
Thanks again, kin.
Haha.. Thanks too.
Tomorrow.. I will show some pics of BAG.
I didn't post when I paid, but I paid for my TX-CP. I'm really looking forward to this board!
Thanks again, kin.
Haha.. Thanks too.
Tomorrow.. I will show some pics of BAG.
Hey kin, since you got Leeku to add the RGBLED On/Off feature, could you possibly ask him to add a toggle for the Shift-Esc ~ feature? It's kind of a pointless feature for layouts of this size, though I can see it being nice for 60-65%. I had to downgrade my firmware to get rid of that, so I could use Ctrl-Shift-Esc to open Task Manager in Windows. Took me about an hour and a half of Googling and experimenting to figure it out, was quite frustrating actually.
That said, can't wait for my Titan Grey. Thanks kin.
I didn't post when I paid, but I paid for my TX-CP. I'm really looking forward to this board!
Thanks again, kin.
Haha.. Thanks too.
Tomorrow.. I will show some pics of BAG.
Is it possible to get just the bag? :D
Hey kin, since you got Leeku to add the RGBLED On/Off feature, could you possibly ask him to add a toggle for the Shift-Esc ~ feature? It's kind of a pointless feature for layouts of this size, though I can see it being nice for 60-65%. I had to downgrade my firmware to get rid of that, so I could use Ctrl-Shift-Esc to open Task Manager in Windows. Took me about an hour and a half of Googling and experimenting to figure it out, was quite frustrating actually.
That said, can't wait for my Titan Grey. Thanks kin.
Hey kin, since you got Leeku to add the RGBLED On/Off feature, could you possibly ask him to add a toggle for the Shift-Esc ~ feature? It's kind of a pointless feature for layouts of this size, though I can see it being nice for 60-65%. I had to downgrade my firmware to get rid of that, so I could use Ctrl-Shift-Esc to open Task Manager in Windows. Took me about an hour and a half of Googling and experimenting to figure it out, was quite frustrating actually.
That said, can't wait for my Titan Grey. Thanks kin.
I just updated my TX84 to the new Leeku firmware the other day, and can 100% confirm that has been fixed. There's now a drop down toggle on the main screen of jigon that lets you choose Shift Esc behaviour (I am also a heavy user of Ctrl Shift Esc to invoke taskmgr)
Bag sample.Can you open the bag for us? :)
I will change the handle part.
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
Bag sample.Can you open the bag for us? :)
I will change the handle part.
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
Also, I think the hinge joint of the case should be at bottom side while handling the case.
[/quoteAlso, I think the hinge joint of the case should be at bottom side while handling the case.
Thanks. Haha
It will be changed..
Hi Kin,
Are you planning to offer desk mats like the one you include with the TX87? I really like those and would pay extra for a matching TX1800 one!
Hello, I believe I submitted a pre-order for a TXCP on 4/26 but I don't believe I've seen an invoice come through yet. Just wanted to make sure I didn't screw up and that I paid promptly etc. Thanks so much!
Hello, I believe I submitted a pre-order for a TXCP on 4/26 but I don't believe I've seen an invoice come through yet. Just wanted to make sure I didn't screw up and that I paid promptly etc. Thanks so much!I checked your order and paypal.
I sent an invoice.
But maybe it was not sent.
Hello, I believe I submitted a pre-order for a TXCP on 4/26 but I don't believe I've seen an invoice come through yet. Just wanted to make sure I didn't screw up and that I paid promptly etc. Thanks so much!
kin, so would we still be able to join the TXCP r2 if there is a delay? Here's hoping.
damn I wish tx1800 came in olive green
kin, so would we still be able to join the TXCP r2 if there is a delay? Here's hoping.
I made txcp enough quantity.
After finishing making, I will take orders again.
Plz wait for a month.
All keyboards I order get delayed this month :(
What is the new expected shipping date for grey TX CP ?
Bag sample.
I will change the handle part.
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
Bag sample.
I will change the handle part.
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
Wow, these look great! Will they be available to people without a TX keyboard? I'd love one for my 87-key boards, even if it's a little larger to fit the 1800.
Bag sample.
I will change the handle part.
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
Wow, these look great! Will they be available to people without a TX keyboard? I'd love one for my 87-key boards, even if it's a little larger to fit the 1800.
Now.. Already made for 1800, cp, ls, full layout → Large size
I will make other size bags for 60, 65, 75 and 87.
It will take one more month to make other size bags.
kin, so would we still be able to join the TXCP r2 if there is a delay? Here's hoping.
I made txcp enough quantity.
After finishing making, I will take orders again.
Plz wait for a month.
Any images of the TX-CP weight-plate? Thanks in advance :p
Any images of the TX-CP weight-plate? Thanks in advance :pShow Image(http://i.imgur.com/gAZKtS6.jpg)
Any images of the TX-CP weight-plate? Thanks in advance :pShow Image(http://i.imgur.com/gAZKtS6.jpg)
Any images of the TX-CP weight-plate? Thanks in advance :pShow Image(http://i.imgur.com/gAZKtS6.jpg)
That Round 2? Kin had said he'd try and ship by the 10th, but I'm not sure if he is delayed. For TX-75 he only shipped like 3 or so a day but that would be difficult to do with 200 orders of TX-CP and TX1800 boards.
When is TX-CP R2 gonna ship? Was a shipping date given? I thought I was in R1 but I still don't have my keyboard so I a guessing I'm in R2.
I'm still waiting for my TX1800 V2? I was in for the first batch. What's going on???
I'm still waiting for my TX1800 V2? I was in for the first batch. What's going on???
These are users who got tracking for their txcp. Please check your email:
footiemonkey
kekstee
piercejenkins
yokken
zekkin
kawasaki161
There is one problem: Too many grey txcps have problems so there are not going to be enough for all grey orders. Please submit a ticket on txkeyboards.com to change your order to a different color/ cancel your order/ hold on to this color (will have to wait until next month for them to be shipped).
I'm still waiting for my TX1800 V2? I was in for the first batch. What's going on???
I believe I replied to your ticket. TX1800 v2 will be shipped starting next Monday. Delays were due to factory.
There is one problem: Too many grey txcps have problems so there are not going to be enough for all grey orders. Please submit a ticket on txkeyboards.com to change your order to a different color/ cancel your order/ hold on to this color (will have to wait until next month for them to be shipped).
Hi Popkorn62 thanks so much for the update! Um, I believe I have a grey one on order - is there a list and picture of the other colors so that we can compare our options and decide if we want to switch or want to wait? Thanks!
My baby just arrived.
Thank you so much! This thing is a tank and the packaging is amazing. <3
My baby just arrived.
My baby just arrived.
Is that the Titanium Grey? Looks so sweet - thats what I have on order. Popkorn's note above said that a bunch of those were delayed 1 month or more due to manufacturing issues so you might be one of the lucky ones!
Sorry for late shipping.
18 July shipping.
diiiP
Afrokobe
kram21
Baconheart
handcraftedbits
lasermild
teacob
Sorry for late shipping.
18 July shipping.
diiiP
Afrokobe
kram21
Baconheart
handcraftedbits
lasermild
teacob
Kin is back!!! ;D
Sorry for late shipping.
18 July shipping.
diiiP
Afrokobe
kram21
Baconheart
handcraftedbits
lasermild
teacob
Kin is back!!! ;D
Woot woot!! We missed you, Kin!!
Going to be some beautiful TX builds happening soon- can't wait to see 'em.
Haven't been able to get this off my desk for a few months now... Brass plate TX FTW!Show Image(https://uploads.tapatalk-cdn.com/20170719/d7c2d3ce7df3bfc75781644e7204edc3.jpg)
19 July shipping
odd
ocnis
Azaicorp
Sorry for late shipping.Thanks,
18 July shipping.
diiiP
Afrokobe
kram21
Baconheart
handcraftedbits
lasermild
teacob
So are there any pictures of the grey yet?(https://uploads.tapatalk-cdn.com/20170719/73ec7703ed15770e758cdb713929f2bb.jpg)
19 July shipping
odd
ocnis
Azaicorp
kin I had a dream about buying one of your carrying cases last night, any more info on when they might be available for purchase seperately? :D
Sorry for late shipping.
18 July shipping.
diiiP
Afrokobe
kram21
Baconheart
handcraftedbits
lasermild
teacob
Kin is back!!! ;D
Woot woot!! We missed you, Kin!!
Going to be some beautiful TX builds happening soon- can't wait to see 'em.
Haven't been able to get this off my desk for a few months now... Brass plate TX FTW!Show Image(https://uploads.tapatalk-cdn.com/20170719/d7c2d3ce7df3bfc75781644e7204edc3.jpg)
Oh wow, the matching LEDs for the GMK Penumbra mods and alphas are soooo nice. Can't wait to share my build.
It's not available right now so if you ordered it, please submit a ticket to let kin know if you want to keep it (will have to wait for a month) / change to one of the colors above / cancel your order.
It's not available right now so if you ordered it, please submit a ticket to let kin know if you want to keep it (will have to wait for a month) / change to one of the colors above / cancel your order.
That's news to me, kin verified with me that I had a grey one and sent me shipping confirmation the other day...
19 July shipping
odd
ocnis
Azaicorp
kin I had a dream about buying one of your carrying cases last night, any more info on when they might be available for purchase seperately? :D
Buying only bag is not good.
Because shipping cost is as expensive as bag price.
(Bag:$30, shipping to US:$35 )
It is cheaper to buy keyboard with bag.
Adding one more bag with keyboard increase weight 1~1.5kg.
Its shipping cost increase $13 (USA).
I am looking for cheaper shipping methods.
Bags for 87 and 75 will be made in July.
LZ.cls bag will be the first round.
Which shipping firm? GLS/DHL/UPS mayhaps?19 July shipping
odd
ocnis
Azaicorp
kin I had a dream about buying one of your carrying cases last night, any more info on when they might be available for purchase seperately? :D
Buying only bag is not good.
Because shipping cost is as expensive as bag price.
(Bag:$30, shipping to US:$35 )
It is cheaper to buy keyboard with bag.
Adding one more bag with keyboard increase weight 1~1.5kg.
Its shipping cost increase $13 (USA).
I am looking for cheaper shipping methods.
Bags for 87 and 75 will be made in July.
LZ.cls bag will be the first round.
EMSWhich shipping firm? GLS/DHL/UPS mayhaps?19 July shipping
odd
ocnis
Azaicorp
kin I had a dream about buying one of your carrying cases last night, any more info on when they might be available for purchase seperately? :D
Buying only bag is not good.
Because shipping cost is as expensive as bag price.
(Bag:$30, shipping to US:$35 )
It is cheaper to buy keyboard with bag.
Adding one more bag with keyboard increase weight 1~1.5kg.
Its shipping cost increase $13 (USA).
I am looking for cheaper shipping methods.
Bags for 87 and 75 will be made in July.
LZ.cls bag will be the first round.
Hey Kin. How much would shipping be to me in Japan for a TX1800 case?
At the customs office... again....
Almost. I think I've been there 7 times already this year, every time (except once) there was nothing wrong, it's starting to get annoying.
At the customs office... again....
Ouch. RIP wallet. Do they know you by name there yet?
Almost. I think I've been there 7 times already this year, every time (except once) there was nothing wrong, it's starting to get annoying.
At the customs office... again....
Ouch. RIP wallet. Do they know you by name there yet?
Guess what just arrivedRIP 19% :(Show Image(http://puu.sh/wOnUL/60787dcf18.png)
At the customs office... again....
Guess what just arrivedRIP 19% :(Show Image(http://puu.sh/wOnUL/60787dcf18.png)
At the customs office... again....
Wasn't kin quite helpful...
Wasn't kin pretty helpful when declaring the value of the item though? I know mine is listed as "$85" which of course is not quite accurate ;D. Customs isn't going to ding you for $600+ are they?
Cross-posting it here from the TX1800v2 GB thread. I got my Titan Grey kit today and it just oozes quality. Thank you so much kin, I appreciate all of your hard work and I hope you take some time for yourself to relax once these buys are done.
I swapped the plate in from my existing black TX-CP case, flipped it over, and just grinned. What a gorgeous case. It's hard to capture the smooth flat dark grey, but it looks very sleek and is honestly the perfect color for my taste in dark colorways. It has a wonderful sheen to it and goes so well with Carbon. I suspect LightCycle and Orange on Dolch will look great as well! I didn't take any photos of the brushed brass but it's a looker.Show Image(http://i.imgur.com/4basqan.jpg)Show Image(http://i.imgur.com/ix00BEs.jpg)Show Image(http://i.imgur.com/XBhL4Up.jpg)Show Image(http://i.imgur.com/xfWnv3f.jpg)
Thanks again Kin, amazing quality.
What switches and which plate? Those vbs up there sit nice and tight inside the cutouts.
What switches and which plate? Those vbs up there sit nice and tight inside the cutouts.
Brass plate, I tried every switch I had, new Cherry, vintage Cherry, Panda, Gateron with black bottom and and Zealios.
Quick and dirty video, the ones that were still in afterwards would fall out when you just touched them:
Measuring the cutouts told me that they are 0.4mm larger than the ones on the TX-87 :(
@ocnis is this he grey one? Can you post a pic with better lighting? :D
TX84 When? :'(
24 July shipping
kimbles
jal
poolside
WNovizar
25 July shipping
workglove27
PoisonKing
vlauib
kawasaki161 (brass plate)
Just got mine yesterday and so nice!
I hope you make 65% layout also :thumb:
P/S: Don't forget to post your board!!!
Hey could you please share that background youre using possibly in 1440p?P/S: Don't forget to post your board!!!
Thanks for the reminder, I'd almost forgotten to post mine assembled.Show Image(https://i.imgur.com/0yo7tk7.jpg)
Apologies for the potato phone camera picture, but this is still by far the best keyboard I've ever seen and I think I'll be keeping it forever.
Hey could you please share that background youre using possibly in 1440p?P/S: Don't forget to post your board!!!
Thanks for the reminder, I'd almost forgotten to post mine assembled.Show Image(https://i.imgur.com/0yo7tk7.jpg)
Apologies for the potato phone camera picture, but this is still by far the best keyboard I've ever seen and I think I'll be keeping it forever.
Hey could you please share that background youre using possibly in 1440p?P/S: Don't forget to post your board!!!
Thanks for the reminder, I'd almost forgotten to post mine assembled.Show Image(https://i.imgur.com/0yo7tk7.jpg)
Apologies for the potato phone camera picture, but this is still by far the best keyboard I've ever seen and I think I'll be keeping it forever.
All these boards got me hyped up as well! I don't know when I'm gonna get it but I'm excited !
All these boards got me hyped up as well! I don't know when I'm gonna get it but I'm excited !
Yours will be sent in 2018. :-)
Show Image(https://i.imgur.com/k9yElOK.jpg)
Olive top, grey bottom, GMK Coniferous, Lubed (thicc) Vintage Blacks, Spectral Ojum Bombking.
Love this thing.
If you guys would like to be notified for TX-CP extras (B-stock only), please register on txkeyboards.com and I will send out email to all users when I have a confirmation of the quantity. It will be about 10 total.
If you guys would like to be notified for TX-CP extras (B-stock only), please register on txkeyboards.com and I will send out email to all users when I have a confirmation of the quantity. It will be about 10 total.
If you guys would like to be notified for TX-CP extras (B-stock only), please register on txkeyboards.com and I will send out email to all users when I have a confirmation of the quantity. It will be about 10 total.
I already registered for an account, do I need to sign up for some sort of special mailing list or no?
If you guys would like to be notified for TX-CP extras (B-stock only), please register on txkeyboards.com and I will send out email to all users when I have a confirmation of the quantity. It will be about 10 total.
Thanks for keeping us updated!
Great news! Do you have any time estimation? A week or could it be longer?
Sitting here patiently waiting for a Kin 60% boardSame :)
Sitting here patiently waiting for a Kin 60% board
Any chance of a TX TKL board GB going up in the future?
Any chance of a TX TKL board GB going up in the future?
No more GB.
After making, I will sell them.
Tx60 and Tx65 >>> TX100 and TXergo >>> TX84se
Any chance of a TX TKL board GB going up in the future?
No more GB.
After making, I will sell them.
Tx60 and Tx65 >>> TX100 and TXergo >>> TX84se
Any chance of a TX TKL board GB going up in the future?
No more GB.
After making, I will sell them.
Tx60 and Tx65 >>> TX100 and TXergo >>> TX84se
How about TX75??
Any chance of a TX TKL board GB going up in the future?
No more GB.
After making, I will sell them.
Tx60 and Tx65 >>> TX100 and TXergo >>> TX84se
Oh that's cool, any idea of time frames of when we might be seeing each of these boards?
Kin, any TX-87 extras possibly?
Kin, any TX-87 extras possibly?
After finishing tx1800v2 shipping, I will sell extra tx.series in txkeyboards.com
Kin, any TX-87 extras possibly?
After finishing tx1800v2 shipping, I will sell extra tx.series in txkeyboards.com
Hi kin! Any chance you have extra PCBs for TX87? I've had a lot of problems with mine which is described in detail here: https://geekhack.org/index.php?topic=90516.0
I don't think I will be able to repair/fix it. Would therefore be awesome to be able to buy a new one. Cheers!
Sent from my Nexus 5X using Tapatalk
Great news! :) I will wait patiently.Kin, any TX-87 extras possibly?
After finishing tx1800v2 shipping, I will sell extra tx.series in txkeyboards.com
Hi kin! Any chance you have extra PCBs for TX87? I've had a lot of problems with mine which is described in detail here: https://geekhack.org/index.php?topic=90516.0
I don't think I will be able to repair/fix it. Would therefore be awesome to be able to buy a new one. Cheers!
Sent from my Nexus 5X using Tapatalk
I plan to make more 87pcb.
Kin, any TX-87 extras possibly?
After finishing tx1800v2 shipping, I will sell extra tx.series in txkeyboards.com
Any chance of a TX TKL board GB going up in the future?
No more GB.
After making, I will sell them.
Tx60 and Tx65 >>> TX100 and TXergo >>> TX84se
How about TX75??
When I will take 75pcb, i will sell ome extras.
I am curious is there any tx board support alps switch, I got some goodie alps blue recently and want to put them in some nice endgame boardif you can have a plate made, you may get the PCB from Leeku.
I am curious is there any tx board support alps switch, I got some goodie alps blue recently and want to put them in some nice endgame boardif you can have a plate made, you may get the PCB from Leeku.
Maybe a dumb question, so here goes nothing. Does the TX75 plate support plate mounted stabilisers? Reason for me asking this is because I've realised I do not like the Zeal stabs that I installed. OG Chery is way nicer. Hence I am thinking of swapping them out, but I really can't be bothered with desoldering the entire board. I've had bad experience with that and would like to avoid it as much as possible.
Maybe a dumb question, so here goes nothing. Does the TX75 plate support plate mounted stabilisers? Reason for me asking this is because I've realised I do not like the Zeal stabs that I installed. OG Chery is way nicer. Hence I am thinking of swapping them out, but I really can't be bothered with desoldering the entire board. I've had bad experience with that and would like to avoid it as much as possible.
No, it does not. You should, however, be able to desolder just the stabilized keys and then wiggle out the stabs as the cutouts are huge. OG stabs go back in like a charm, just the spacebar is a bit more annoying as you can't put it in in one piece. If you'd rather desolder all of it something like a ZD-211 desoldering iron works well for one or two boards. I recently got myself a desoldering station which makes it even easier, but the ZD-211 is the budget king. The ZD-211 clogs rather fast, but you can just take a 2.5mm drill and drill it out if that happens.
If you guys would like to be notified for TX-CP extras (B-stock only), please register on txkeyboards.com and I will send out email to all users when I have a confirmation of the quantity. It will be about 10 total.
Thanks for keeping us updated!
Great news! Do you have any time estimation? A week or could it be longer?
I think sometimes in the next 2 weeks.
If you guys would like to be notified for TX-CP extras (B-stock only), please register on txkeyboards.com and I will send out email to all users when I have a confirmation of the quantity. It will be about 10 total.
Thanks for keeping us updated!
Great news! Do you have any time estimation? A week or could it be longer?
I think sometimes in the next 2 weeks.
Did this b-stock sale ever happen?
Quick question, as it's my first TX keyboard:I had the same problem but I fixed this by swapping Capslock to L_Ctrl on JigOn. It's normal now, the Capslock button acts as a Capslock and so does the left Ctrl.
Somehow my L_CTRL is acting as Capslock now and I really don't know how to turn it back. I think I might have hit some weird key combo for switching the function? Any help is highly appreciated, thanks
Any chance of a TX TKL board GB going up in the future?
No more GB.
After making, I will sell them.
Tx60 and Tx65 >>> TX100 and TXergo >>> TX84se
Quick question, as it's my first TX keyboard:
Somehow my L_CTRL is acting as Capslock now and I really don't know how to turn it back. I think I might have hit some weird key combo for switching the function? Any help is highly appreciated, thanks
A few more TX-65 pics (http://kbdlab.co.kr/index.php?document_srl=4832656&mid=board_Lsno50) popped up yesterday. It looks very nice :thumb:
I sent all preorder of txcp R2.
I sent all preorder of txcp R2.
Hello, thank you so much for the great work putting this together! Just wanted to double check what this meant though, does this mean that the TXCP R2 have all been shipped (including the titanium gray)?
A few more TX-65 pics (http://kbdlab.co.kr/index.php?document_srl=4832656&mid=board_Lsno50) popped up yesterday. It looks very nice :thumb:
Yes. I sent txcp to grey preorder persons.
Will there be tx87 like carrying cases for the tx60/65? Or even the desk pads that fit under the boards? I would love both <3Of course I will make bag for txkeyboards.
Will there be tx87 like carrying cases for the tx60/65? Or even the desk pads that fit under the boards? I would love both <3Of course I will make bag for txkeyboards.
It is possible to carry not only keyboard but also wrist rest.
I have made mats for tx87 and txpad.
But it is not popular to many persons.
Only a few persons like it.
It is not difficult to make mats for tx60/tx65/tx84se.
I will try to make mat for them.
Will there be tx87 like carrying cases for the tx60/65? Or even the desk pads that fit under the boards? I would love both <3Of course I will make bag for txkeyboards.
It is possible to carry not only keyboard but also wrist rest.
I have made mats for tx87 and txpad.
But it is not popular to many persons.
Only a few persons like it.
It is not difficult to make mats for tx60/tx65/tx84se.
I will try to make mat for them.
Will there be tx87 like carrying cases for the tx60/65? Or even the desk pads that fit under the boards? I would love both <3Of course I will make bag for txkeyboards.
It is possible to carry not only keyboard but also wrist rest.
I have made mats for tx87 and txpad.
But it is not popular to many persons.
Only a few persons like it.
It is not difficult to make mats for tx60/tx65/tx84se.
I will try to make mat for them.
<3!!! Would love a TX-CP bag v2 to carry my wrist rest too!!!
Will there be an option for an acrylic diffuser in the future? Looks great. :)
Any chance of a TX TKL board GB going up in the future?
No more GB.
After making, I will sell them.
Tx60 and Tx65 >>> TX100 and TXergo >>> TX84se
Quick question, as it's my first TX keyboard:
Somehow my L_CTRL is acting as Capslock now and I really don't know how to turn it back. I think I might have hit some weird key combo for switching the function? Any help is highly appreciated, thanks
Have you looked in Jigon to what the key is mapped? You can download the software at kbdlab (http://kbdlab.co.kr/index.php?document_srl=2702787&mid=board_sw).
There is also an english documentation for the software. https://www.dropbox.com/sh/v24vygvyl4mvqrm/AABUNcm0BDioYE5QbArje0Kba?dl=0
And if you need even more help, there is also some youtube tutorials on using Jigon.
I think I also read somewhere how to swap capslock and control but can't find it at the moment.
Quick question, as it's my first TX keyboard:
Somehow my L_CTRL is acting as Capslock now and I really don't know how to turn it back. I think I might have hit some weird key combo for switching the function? Any help is highly appreciated, thanks
Have you looked in Jigon to what the key is mapped? You can download the software at kbdlab (http://kbdlab.co.kr/index.php?document_srl=2702787&mid=board_sw).
There is also an english documentation for the software. https://www.dropbox.com/sh/v24vygvyl4mvqrm/AABUNcm0BDioYE5QbArje0Kba?dl=0
And if you need even more help, there is also some youtube tutorials on using Jigon.
I think I also read somewhere how to swap capslock and control but can't find it at the moment.
Did you ever find the link for this? I too have the swapped LCtrl and Caps and it's driving me crazy. I tried to remap those keys in Jigon but the keys don't remap. It seems like a hard firmware option since i must have hit the magic key sequence at some point and again trying to remap them does not work. Any help on this would be great, thanks.
Happy 2018, year of the TX-Ergo :)
Quick question, as it's my first TX keyboard:
Somehow my L_CTRL is acting as Capslock now and I really don't know how to turn it back. I think I might have hit some weird key combo for switching the function? Any help is highly appreciated, thanks
Have you looked in Jigon to what the key is mapped? You can download the software at kbdlab (http://kbdlab.co.kr/index.php?document_srl=2702787&mid=board_sw).
There is also an english documentation for the software. https://www.dropbox.com/sh/v24vygvyl4mvqrm/AABUNcm0BDioYE5QbArje0Kba?dl=0
And if you need even more help, there is also some youtube tutorials on using Jigon.
I think I also read somewhere how to swap capslock and control but can't find it at the moment.
Did you ever find the link for this? I too have the swapped LCtrl and Caps and it's driving me crazy. I tried to remap those keys in Jigon but the keys don't remap. It seems like a hard firmware option since i must have hit the magic key sequence at some point and again trying to remap them does not work. Any help on this would be great, thanks.
for switching them, push together capslock and L-ctrl for ten seconds
Just getting into building keyboards, are there any TX75 for sale? Looking to hopefully just do endgame before I dive too far!
Just getting into building keyboards, are there any TX75 for sale? Looking to hopefully just do endgame before I dive too far!
Endgame is always the next board you are getting.
The TX75 can be found on reddit.com/r/mechmarket every now and then for ~3-400 USD.
Just getting into building keyboards, are there any TX75 for sale? Looking to hopefully just do endgame before I dive too far!
Endgame is always the next board you are getting.
The TX75 can be found on reddit.com/r/mechmarket every now and then for ~3-400 USD.
No. I would like this one to be endgame. Or at least I'm hoping so... I said my first build was my last and here I am looking for a new one. And maybe spending over $500 will push me to not replace this one. I'll look out on mechmarket but looking for an unbuilt one.
Tx white keyboards
https://goo.gl/forms/2hkRnjUw7ztLuHbn1
Tx white keyboardsAny chance for white TX75?
https://goo.gl/forms/2hkRnjUw7ztLuHbn1
Any word on when the form for the antique will come out? Or if they'll be the standard colors?
Is there any pics of the white boards?
Sent from my SM-G930T using Tapatalk