As a reminder to all, CAVEAT EMPTOR (https://geekhack.org/index.php?topic=36773.0)
Which one is compatible with the TX87 PCB?
:-*As a reminder to all, CAVEAT EMPTOR (https://geekhack.org/index.php?topic=36773.0)
yea :)
Mod Edit: turn that frown upside down! GLWGB :thumb:
Which one is compatible with the TX87 PCB?
The GON one, I think.
Which one is compatible with the TX87 PCB?
The GON one, I think.
Hwood can you confirm this?
Which one is compatible with the TX87 PCB?
The GON one, I think.
Hwood can you confirm this?
I'll have to check with foggy. Although if the usb ports are in the same place, then it should be
Which one is compatible with the TX87 PCB?
The GON one, I think.
Hwood can you confirm this?
I'll have to check with foggy. Although if the usb ports are in the same place, then it should be
I don't have a GON pcb to check.
Which one is compatible with the TX87 PCB?
The GON one, I think.
Hwood can you confirm this?
I'll have to check with foggy. Although if the usb ports are in the same place, then it should be
I don't have a GON pcb to check.
I do. GON PCBs are A87, so it'll work with a TX87.
Just keep in mind the TX87 was meant for aluminum custom which have the usb port on the top of the PCB. The B.87 and Phantom have the usb port on the bottoms. Gon offers both USB placement (his Nerd cases have the usb on bottom, but if you wanted to build a Kustom, USB on top).Which one is compatible with the TX87 PCB?
The GON one, I think.
Hwood can you confirm this?
I'll have to check with foggy. Although if the usb ports are in the same place, then it should be
I don't have a GON pcb to check.
I do. GON PCBs are A87, so it'll work with a TX87.
Cool thanks
Just keep in mind the TX87 was meant for aluminum custom which have the usb port on the top of the PCB. The B.87 and Phantom have the usb port on the bottoms. Gon offers both USB placement (his Nerd cases have the usb on bottom, but if you wanted to build a Kustom, USB on top).
Tl;Dr still A.87 but USB is not always on the same side of the PCB.
Sent from my Pixel using Tapatalk
Just keep in mind the TX87 was meant for aluminum custom which have the usb port on the top of the PCB. The B.87 and Phantom have the usb port on the bottoms. Gon offers both USB placement (his Nerd cases have the usb on bottom, but if you wanted to build a Kustom, USB on top).
Tl;Dr still A.87 but USB is not always on the same side of the PCB.
Sent from my Pixel using Tapatalk
What USB placement should we focus on if we're planning on doing an A.87 build? TX87 is my first choice for PCB, but would I be better off with a Nerd PCB with bottom USB instead?
Some questions here.
1. Can we use TX87 if we re solder the USB connector upside down?
2. Will this work for plate mounted switches?
3. What would be an approximate shipping cost to Thailand?
Thanks
Sent from my ONEPLUS A5000 using Tapatalk
Just submitted an order. Hope it's not too late.
Sent from my ONEPLUS A5000 using Tapatalk
Have you considered making a 65% version of this, perhaps using a Winkeyless 22mini for an off-the-shelf PCB?
Show Image(https://gm1.ggpht.com/WyzTcJ0chKNQl_FoIWrPr7lIY0w6PV3pfEVbouEC9moBwF0_5QsxkWfZsdQQfhKbuz0UiunPWEnOHuhAGAM5WRw112ZZHan9m85wUxMsrfDUpg62WqnqWvNu01K5XzzUOdG5a2SXUYpsXNDlh3TZQjpV30EBEocZmtyEY75jP0ig9hLbO2N1b2kXmlzitbQl21rHJaDWafRZvPSJq5oye1kxCV4qC4VONxNXcJ6typQN5_3n78YpG3kW-CMjv_7FNwNkQfHWl7aVQ04onDPBH4AA88LlKJCZGAcp2Xd05w8t6AST8lFYjWUN43oW6uBrEQ-CAVZzQlZ8B8PaJiuNvMKOd8h2ODpk0L_EiS6Y8ZkfNhDTw2k9b_qYz7UaTo4ikFXQZUJNduUi-LzClgC9RzF-v59bazN-A27Q7c8IQvdbwatE3yyoJSCpchFzZppAOBLJWGwKCzGnrePJY_mqPa7OeYtcfUEXIrQHw2KLsPG1dY4zG5VpH0k1rRq0XtRf7V5heVNRW2dzAzaHAA-Eyx_DSTbPuTq86BoWohRhWAJiXAtSTqEsqMeNMtq7AjuQprGspv6NsQaHhKvrjut_aOkY50d55fCuy6653-kcoNgEzZ34cMaENz05cJECw_mAo1kMyH2b6BJ1vIincafiZcWdrf1ti7CNuNkHhs--t1YSa1eFvkJ3_hJCsU8QaY6n=w1006-h628-l75-ft)Show Image(https://gm1.ggpht.com/3KSntPGCZ51cMdTQB_OqpRHyM3JBp4arEMpL-cscMV27a-RDpX4TUfQ-liR5R5LEc6iaiHNoG22nHyqtAMZmL0GGE_WgU-z7hiJYTVyRdZU4LywfYne2B54YmGx1C7VNbGjSRX4GnIVbNN5v7tfEdlALzKqUxojaJA9lJeROY3hNCOq6pTYQVbUO7ZSJWDJTliqGPAw0tGs_hYbPXPJXr_1ts2HXFb4X6QpF7fMi8l_noo5cLVugyFi7bMCkInjtQB6GPObNYqf2o7HiBaHNPg2Qpo1ftaBSYDogtZzZ3f-bfhYXELtYcktp8xgGwLUkMJlMlLqPx7CV67aloGvBGQNfpbuhGdx-Hya-63omNLWBFVM2sLgHHQpuuTsfefd8kJQE0GzshsP1EB-YBiS5Z9zo565GeqklrJTad_fNBj_vIDvPngy4Z60AwXqSrCbQwxIUsMa-dfKIgmu1Skf2UHI0IVxTk50DGeAox1zLxMa2SD9SLV1ViQzR5_0ZxyrSKGHvyVFJvgqpHO3znwLk3Nmw2xqWTaN9TADgRMGdlFV24Re_bbm22Pyq_dEtNmnj_Kree8GrUdLDrXVByg2jTQX6XdFcyKHVdbvXjDmaMlK90KVTOu4BacFa8-lzfxj6iw8ZTRT1zwjyo4DYBH3I1xt6jt3m6IC718u87NJxweC1TcrLOJtdBzuFYUZCDPFh=w1006-h628-l75-ft)Show Image(https://gm1.ggpht.com/Y-126PkvyHAv3SXkDVTMR995_ZQMSOwDbTqSFqbgvwjoaEGUK6A0mX6Q0op6qnvzqf8zyL31CRGSFo7LK20toEfkuEMwB8r5bmEmQsOTfAyTwbLRQ57NvH3EaIPGXHiqmxUkAAQ87D7xaZN8P4Chl_m-cqCRIas3OG5pwrWHMRRRRBz9g9roK2_OR2hbvsFYDdPwUPhkZ4GVYCGuXcmAw-FtN1XPnG61woxASdKJ7seorW0SdFg7kNQcSJ04Sjn31ScIJlB5pFosNkOTbbfYHCv94pGaH5GD1h4upvrRbMQlZeC9hEhgXSO_x0RI3PAUfL_RKRrsVgRcNeISRUnDQryP6gf4Z7nRFMS8SwrfffrJwKYz9Zk2ZzrUwuVzQhDxcc8Uw_R0S4H7eGzZ3U5_5tkhzx7DcpqFmeVh9RWOOE-vda89roEy-Qr-pJw8sRc-nL3XeJQA0BAu9UJSJ5hQgry3SqgEKoA5s-HmpBfyfnqB85XOiDZflYlIffKARq48Od20R_P13tydymZIVkBiRkBI7gfwfuDml2DQRuLxhI48OkLOIrWqoSB0WGxcXdmU4JDKdH53RQOOQ7j5t22TM8sh_jdRf1iPn1VK3tR1afYwQ8r9IpSw84QDUGdnvOZxrnjbIL6uezBgkbnpQ-PcdireDWxDubexjCZglHhFcyfjA5VmvbQL3h3-gXh-XRom=w1006-h628-l75-ft)
Show Image(https://gm1.ggpht.com/WyzTcJ0chKNQl_FoIWrPr7lIY0w6PV3pfEVbouEC9moBwF0_5QsxkWfZsdQQfhKbuz0UiunPWEnOHuhAGAM5WRw112ZZHan9m85wUxMsrfDUpg62WqnqWvNu01K5XzzUOdG5a2SXUYpsXNDlh3TZQjpV30EBEocZmtyEY75jP0ig9hLbO2N1b2kXmlzitbQl21rHJaDWafRZvPSJq5oye1kxCV4qC4VONxNXcJ6typQN5_3n78YpG3kW-CMjv_7FNwNkQfHWl7aVQ04onDPBH4AA88LlKJCZGAcp2Xd05w8t6AST8lFYjWUN43oW6uBrEQ-CAVZzQlZ8B8PaJiuNvMKOd8h2ODpk0L_EiS6Y8ZkfNhDTw2k9b_qYz7UaTo4ikFXQZUJNduUi-LzClgC9RzF-v59bazN-A27Q7c8IQvdbwatE3yyoJSCpchFzZppAOBLJWGwKCzGnrePJY_mqPa7OeYtcfUEXIrQHw2KLsPG1dY4zG5VpH0k1rRq0XtRf7V5heVNRW2dzAzaHAA-Eyx_DSTbPuTq86BoWohRhWAJiXAtSTqEsqMeNMtq7AjuQprGspv6NsQaHhKvrjut_aOkY50d55fCuy6653-kcoNgEzZ34cMaENz05cJECw_mAo1kMyH2b6BJ1vIincafiZcWdrf1ti7CNuNkHhs--t1YSa1eFvkJ3_hJCsU8QaY6n=w1006-h628-l75-ft)Show Image(https://gm1.ggpht.com/3KSntPGCZ51cMdTQB_OqpRHyM3JBp4arEMpL-cscMV27a-RDpX4TUfQ-liR5R5LEc6iaiHNoG22nHyqtAMZmL0GGE_WgU-z7hiJYTVyRdZU4LywfYne2B54YmGx1C7VNbGjSRX4GnIVbNN5v7tfEdlALzKqUxojaJA9lJeROY3hNCOq6pTYQVbUO7ZSJWDJTliqGPAw0tGs_hYbPXPJXr_1ts2HXFb4X6QpF7fMi8l_noo5cLVugyFi7bMCkInjtQB6GPObNYqf2o7HiBaHNPg2Qpo1ftaBSYDogtZzZ3f-bfhYXELtYcktp8xgGwLUkMJlMlLqPx7CV67aloGvBGQNfpbuhGdx-Hya-63omNLWBFVM2sLgHHQpuuTsfefd8kJQE0GzshsP1EB-YBiS5Z9zo565GeqklrJTad_fNBj_vIDvPngy4Z60AwXqSrCbQwxIUsMa-dfKIgmu1Skf2UHI0IVxTk50DGeAox1zLxMa2SD9SLV1ViQzR5_0ZxyrSKGHvyVFJvgqpHO3znwLk3Nmw2xqWTaN9TADgRMGdlFV24Re_bbm22Pyq_dEtNmnj_Kree8GrUdLDrXVByg2jTQX6XdFcyKHVdbvXjDmaMlK90KVTOu4BacFa8-lzfxj6iw8ZTRT1zwjyo4DYBH3I1xt6jt3m6IC718u87NJxweC1TcrLOJtdBzuFYUZCDPFh=w1006-h628-l75-ft)Show Image(https://gm1.ggpht.com/Y-126PkvyHAv3SXkDVTMR995_ZQMSOwDbTqSFqbgvwjoaEGUK6A0mX6Q0op6qnvzqf8zyL31CRGSFo7LK20toEfkuEMwB8r5bmEmQsOTfAyTwbLRQ57NvH3EaIPGXHiqmxUkAAQ87D7xaZN8P4Chl_m-cqCRIas3OG5pwrWHMRRRRBz9g9roK2_OR2hbvsFYDdPwUPhkZ4GVYCGuXcmAw-FtN1XPnG61woxASdKJ7seorW0SdFg7kNQcSJ04Sjn31ScIJlB5pFosNkOTbbfYHCv94pGaH5GD1h4upvrRbMQlZeC9hEhgXSO_x0RI3PAUfL_RKRrsVgRcNeISRUnDQryP6gf4Z7nRFMS8SwrfffrJwKYz9Zk2ZzrUwuVzQhDxcc8Uw_R0S4H7eGzZ3U5_5tkhzx7DcpqFmeVh9RWOOE-vda89roEy-Qr-pJw8sRc-nL3XeJQA0BAu9UJSJ5hQgry3SqgEKoA5s-HmpBfyfnqB85XOiDZflYlIffKARq48Od20R_P13tydymZIVkBiRkBI7gfwfuDml2DQRuLxhI48OkLOIrWqoSB0WGxcXdmU4JDKdH53RQOOQ7j5t22TM8sh_jdRf1iPn1VK3tR1afYwQ8r9IpSw84QDUGdnvOZxrnjbIL6uezBgkbnpQ-PcdireDWxDubexjCZglHhFcyfjA5VmvbQL3h3-gXh-XRom=w1006-h628-l75-ft)
Images aren't showing unless I quote and get the links. Is that just me or anyone else?
It's working nowShow Image(https://gm1.ggpht.com/WyzTcJ0chKNQl_FoIWrPr7lIY0w6PV3pfEVbouEC9moBwF0_5QsxkWfZsdQQfhKbuz0UiunPWEnOHuhAGAM5WRw112ZZHan9m85wUxMsrfDUpg62WqnqWvNu01K5XzzUOdG5a2SXUYpsXNDlh3TZQjpV30EBEocZmtyEY75jP0ig9hLbO2N1b2kXmlzitbQl21rHJaDWafRZvPSJq5oye1kxCV4qC4VONxNXcJ6typQN5_3n78YpG3kW-CMjv_7FNwNkQfHWl7aVQ04onDPBH4AA88LlKJCZGAcp2Xd05w8t6AST8lFYjWUN43oW6uBrEQ-CAVZzQlZ8B8PaJiuNvMKOd8h2ODpk0L_EiS6Y8ZkfNhDTw2k9b_qYz7UaTo4ikFXQZUJNduUi-LzClgC9RzF-v59bazN-A27Q7c8IQvdbwatE3yyoJSCpchFzZppAOBLJWGwKCzGnrePJY_mqPa7OeYtcfUEXIrQHw2KLsPG1dY4zG5VpH0k1rRq0XtRf7V5heVNRW2dzAzaHAA-Eyx_DSTbPuTq86BoWohRhWAJiXAtSTqEsqMeNMtq7AjuQprGspv6NsQaHhKvrjut_aOkY50d55fCuy6653-kcoNgEzZ34cMaENz05cJECw_mAo1kMyH2b6BJ1vIincafiZcWdrf1ti7CNuNkHhs--t1YSa1eFvkJ3_hJCsU8QaY6n=w1006-h628-l75-ft)Show Image(https://gm1.ggpht.com/3KSntPGCZ51cMdTQB_OqpRHyM3JBp4arEMpL-cscMV27a-RDpX4TUfQ-liR5R5LEc6iaiHNoG22nHyqtAMZmL0GGE_WgU-z7hiJYTVyRdZU4LywfYne2B54YmGx1C7VNbGjSRX4GnIVbNN5v7tfEdlALzKqUxojaJA9lJeROY3hNCOq6pTYQVbUO7ZSJWDJTliqGPAw0tGs_hYbPXPJXr_1ts2HXFb4X6QpF7fMi8l_noo5cLVugyFi7bMCkInjtQB6GPObNYqf2o7HiBaHNPg2Qpo1ftaBSYDogtZzZ3f-bfhYXELtYcktp8xgGwLUkMJlMlLqPx7CV67aloGvBGQNfpbuhGdx-Hya-63omNLWBFVM2sLgHHQpuuTsfefd8kJQE0GzshsP1EB-YBiS5Z9zo565GeqklrJTad_fNBj_vIDvPngy4Z60AwXqSrCbQwxIUsMa-dfKIgmu1Skf2UHI0IVxTk50DGeAox1zLxMa2SD9SLV1ViQzR5_0ZxyrSKGHvyVFJvgqpHO3znwLk3Nmw2xqWTaN9TADgRMGdlFV24Re_bbm22Pyq_dEtNmnj_Kree8GrUdLDrXVByg2jTQX6XdFcyKHVdbvXjDmaMlK90KVTOu4BacFa8-lzfxj6iw8ZTRT1zwjyo4DYBH3I1xt6jt3m6IC718u87NJxweC1TcrLOJtdBzuFYUZCDPFh=w1006-h628-l75-ft)Show Image(https://gm1.ggpht.com/Y-126PkvyHAv3SXkDVTMR995_ZQMSOwDbTqSFqbgvwjoaEGUK6A0mX6Q0op6qnvzqf8zyL31CRGSFo7LK20toEfkuEMwB8r5bmEmQsOTfAyTwbLRQ57NvH3EaIPGXHiqmxUkAAQ87D7xaZN8P4Chl_m-cqCRIas3OG5pwrWHMRRRRBz9g9roK2_OR2hbvsFYDdPwUPhkZ4GVYCGuXcmAw-FtN1XPnG61woxASdKJ7seorW0SdFg7kNQcSJ04Sjn31ScIJlB5pFosNkOTbbfYHCv94pGaH5GD1h4upvrRbMQlZeC9hEhgXSO_x0RI3PAUfL_RKRrsVgRcNeISRUnDQryP6gf4Z7nRFMS8SwrfffrJwKYz9Zk2ZzrUwuVzQhDxcc8Uw_R0S4H7eGzZ3U5_5tkhzx7DcpqFmeVh9RWOOE-vda89roEy-Qr-pJw8sRc-nL3XeJQA0BAu9UJSJ5hQgry3SqgEKoA5s-HmpBfyfnqB85XOiDZflYlIffKARq48Od20R_P13tydymZIVkBiRkBI7gfwfuDml2DQRuLxhI48OkLOIrWqoSB0WGxcXdmU4JDKdH53RQOOQ7j5t22TM8sh_jdRf1iPn1VK3tR1afYwQ8r9IpSw84QDUGdnvOZxrnjbIL6uezBgkbnpQ-PcdireDWxDubexjCZglHhFcyfjA5VmvbQL3h3-gXh-XRom=w1006-h628-l75-ft)
Images aren't showing unless I quote and get the links. Is that just me or anyone else?
Not working for me either.
These turned out great! Maybe I should have gotten one.
Show Image(https://dl2.pushbulletusercontent.com/lvYC9N34Vsu5HrheF61qJaIHfRMzPQ4o/2277)
Got any extras? PM-in' you, hwood :)
hwood, would you mind sharing the size/name of the screws?
hwood, would you mind sharing the size/name of the screws?
M3 5mm button head for the case, feet are either 10mm M3 flatheads or 8mm (if you need the specs on the feet screws, I can look into it for you)