Author Topic: [IC] Artisan Case - Snaccbox *2020 UPDATE*  (Read 45291 times)

0 Members and 1 Guest are viewing this topic.

Offline DuellM

  • Posts: 321
  • Location: Brooklyn
  • Keyboard Fatty
Re: [IC] Artisan Case - ‘Snaccbox’
« Reply #100 on: Tue, 28 May 2019, 14:50:07 »
Yay!! Im so in for one   :)

Re: [IC] Artisan Case - ‘Snaccbox’
« Reply #101 on: Tue, 28 May 2019, 21:14:10 »
Hype!

Offline SeedyOne

  • Posts: 477
  • Location: Los Angeles
Re: [IC] Artisan Case - ‘Snaccbox’
« Reply #102 on: Wed, 29 May 2019, 00:47:12 »
Can't wait for the pics of the final one  :thumb:

Offline kconfire

  • Posts: 397
  • Location: NJ, USA
Re: [IC] Artisan Case - ‘Snaccbox’
« Reply #103 on: Wed, 29 May 2019, 01:18:09 »
I'm in!!
[Collection] Monokei Kei SE, Realforce R2 TKL, Leopold FC660C
[Soon TM] Monokei Tomo SE, GSKT-00

Offline BAS1C

  • Thread Starter
  • Posts: 443
  • Location: Calgary, AB
Re: [IC] Artisan Case - ‘Snaccbox’
« Reply #104 on: Tue, 04 June 2019, 14:43:50 »
Hey all! Quick update, I know you've all been dying to see it.. Here are some early pics of prototype!

*Also wanted to mention for sake of transparency, this is not being run by Exclusive. He has helped with communication overseas, but the product is not being run or manufactured by Exclusive.

Case is going for coatings later this week, and then hopefully will be shipping out. I am going on vacation next week for 2 weeks, but a good friend in the community has offered to snap some pics of it while I'm out in about in Cali drinking beer :)

As soon as I can get prices and design fixed up for mass productions (due to some flex in the bottom of my prototype design around my weight, I may opt to go without a weight) I will launch the GB! I still need to figure out shipping, I may be looking for a proxy/storefront in the USA to distribute these out there.. But I will look into that once I get a better idea of costs.

ALBUM - https://imgur.com/a/D5USx3v


« Last Edit: Tue, 04 June 2019, 14:53:11 by BAS1C »

Offline txclack

  • Posts: 224
  • Location: Texas
Re: [IC] Artisan Case - ‘Snaccbox’
« Reply #105 on: Tue, 04 June 2019, 15:15:01 »
Looks dope!

If the weight becomes a problem, not having a weight will not change my mind: def in for 1!

Offline mbsurfer

  • Posts: 114
  • Location: South Carolina, USA
Re: [IC] Artisan Case - ‘Snaccbox’
« Reply #106 on: Tue, 04 June 2019, 16:06:21 »
Looks dope!

If the weight becomes a problem, not having a weight will not change my mind: def in for 1!

I concur. Weight or not, I'm in.

Offline DillonHightower

  • Formerly DillonHighsmith
  • Posts: 309
Re: [IC] Artisan Case - ‘Snaccbox’
« Reply #107 on: Tue, 04 June 2019, 16:34:01 »
Very cool. Can't wait to actually get this thing going!
            

Offline SeedyOne

  • Posts: 477
  • Location: Los Angeles
Re: [IC] Artisan Case - ‘Snaccbox’
« Reply #108 on: Tue, 04 June 2019, 20:31:36 »
Looks dope!

If the weight becomes a problem, not having a weight will not change my mind: def in for 1!

+1 I'm in weight or not!

Offline Rejeckted

  • Posts: 101
  • Location: San Diego, California
  • Fe, Fi, Fo, Fum... I smell Kraft dinnah
Re: [IC] Artisan Case - ‘Snaccbox’
« Reply #109 on: Tue, 04 June 2019, 21:32:40 »
Awesome! The stalk continues  :):thumb:

Offline fishinaspacesuit

  • Posts: 96
  • Location: Singapore
Re: [IC] Artisan Case - ‘Snaccbox’
« Reply #110 on: Tue, 04 June 2019, 22:51:36 »
Looking really good! Weight or not, I'm in too!

Offline snelltrail

  • Posts: 197
  • Location: Not CONUS
Re: [IC] Artisan Case - ‘Snaccbox’
« Reply #111 on: Tue, 04 June 2019, 23:53:26 »
Oooooh this is looking goooooooood! Can't wait to get my bois a nicer home!

Offline DillonHightower

  • Formerly DillonHighsmith
  • Posts: 309
Re: [IC] Artisan Case - ‘Snaccbox’
« Reply #112 on: Wed, 05 June 2019, 09:38:50 »


Couple questions @Basic
1 - Do you still plan on having the stackable option?
2- how is lid looking/ working?  I don't see any fasteners , again, I get this is a proto, but still am curious.
3- Do you still plan on etching rows for ease of identification?
 
Weight or no weight, I'm in.. I am anxiously waiting for this beauty 🙏🙏
            

Offline BAS1C

  • Thread Starter
  • Posts: 443
  • Location: Calgary, AB
Re: [IC] Artisan Case - ‘Snaccbox’
« Reply #113 on: Wed, 05 June 2019, 10:21:30 »


Couple questions @Basic
1 - Do you still plan on having the stackable option?
Yes! I got two prototypes made so i can try the stacking method to make sure it all lines up :) (It will just be extra middles, with one top and one bottom).

2- how is lid looking/ working?  I don't see any fasteners , again, I get this is a proto, but still am curious.
It will have small magnets like my travel case :)

3- Do you still plan on etching rows for ease of identification?
I am undecided.. I might add it as an option, depends on spacing and how the SNACCBOX lettering came out. It was about 50/50 when asking people what they wanted in this regard. It would probably be an extra charge unfortunately (though hopefully fairly cheap)

Weight or no weight, I'm in.. I am anxiously waiting for this beauty 🙏🙏

Awesome! Thanks for the support and good questions!

Offline crowKAKAWWW

  • Posts: 75
Re: [IC] Artisan Case - ‘Snaccbox’
« Reply #114 on: Wed, 05 June 2019, 21:47:58 »
Looks fantastic, the hype grows :D
RAMA M60A
KBDFans Frosted Tofu
Cannon Keys Satisfaction 75
Desk Candy Modern M0110
---
ALF x Scott G60

Offline Clo_0lD

  • Posts: 52
  • Location: California
Re: [IC] Artisan Case - ‘Snaccbox’
« Reply #115 on: Thu, 06 June 2019, 04:26:05 »
Is the final product going to hold 96 or 80 artisans? The first post says that the case was going to be 8 x 12, but the renders/photos all show a 8 x 10 slot case so I'm confused as to which is right.

Offline BAS1C

  • Thread Starter
  • Posts: 443
  • Location: Calgary, AB
Re: [IC] Artisan Case - ‘Snaccbox’
« Reply #116 on: Wed, 26 June 2019, 13:56:21 »
Is the final product going to hold 96 or 80 artisans? The first post says that the case was going to be 8 x 12, but the renders/photos all show a 8 x 10 slot case so I'm confused as to which is right.

Hey! Sorry I forgot to correct that. 8x10 due to limitations on machine size.

Also, prototype is finished and shipping today. Will be in my hands shortly. Just putting final touches on the Founders Edition and then will need to sort out pricing, shipping and final options before we jump into a GB.

Teasers:
**Please note that the standard edition will not have a weight, and the founders edition weight will be more of a plate with engraving style!




Offline crowKAKAWWW

  • Posts: 75
Re: [IC] Artisan Case - ‘Snaccbox’
« Reply #117 on: Wed, 26 June 2019, 14:19:13 »
Good lord that Founders Edition looks nice, might have to get two units!

RAMA M60A
KBDFans Frosted Tofu
Cannon Keys Satisfaction 75
Desk Candy Modern M0110
---
ALF x Scott G60

Offline DillonHightower

  • Formerly DillonHighsmith
  • Posts: 309
Re: [IC] Artisan Case - ‘Snaccbox’
« Reply #118 on: Wed, 26 June 2019, 15:19:31 »
Bad ass.  🧡🧡🧡
            

Offline SeedyOne

  • Posts: 477
  • Location: Los Angeles
Re: [IC] Artisan Case - ‘Snaccbox’
« Reply #119 on: Wed, 26 June 2019, 17:05:48 »
Founder's Edition it is then!  :thumb:

Offline Topernicus

  • Posts: 45
Re: [IC] Artisan Case - ‘Snaccbox’
« Reply #120 on: Wed, 26 June 2019, 17:09:30 »
Looking Good!

Offline EMC Labs

  • Posts: 447
Re: [IC] Artisan Case - ‘Snaccbox’
« Reply #121 on: Wed, 26 June 2019, 18:19:00 »
Excited about this. Awaiting price now.

Offline BAS1C

  • Thread Starter
  • Posts: 443
  • Location: Calgary, AB
Re: [IC] Artisan Case - ‘Snaccbox’
« Reply #122 on: Fri, 28 June 2019, 01:06:38 »
Pricing and options formally requested tonight so that we can jump right into GB.

Offline mbsurfer

  • Posts: 114
  • Location: South Carolina, USA
Re: [IC] Artisan Case - ‘Snaccbox’
« Reply #123 on: Fri, 28 June 2019, 08:05:44 »
That founder's edition with brass weight is too nice to pass up

Offline LiQuiDs

  • Posts: 44
  • Location: US
Re: [IC] Artisan Case - ‘Snaccbox’
« Reply #124 on: Fri, 28 June 2019, 13:50:27 »
Where and when?? Love to get in!!

나의 SM-N960U1 의 Tapatalk에서 보냄

Great art is an instant arrested in eternity.

Offline BAS1C

  • Thread Starter
  • Posts: 443
  • Location: Calgary, AB
Re: [IC] Artisan Case - ‘Snaccbox’
« Reply #125 on: Tue, 02 July 2019, 15:25:52 »
Hey all, Prototype pics are up!
https://imgur.com/a/9zQmxXV





Offline crowKAKAWWW

  • Posts: 75
Re: [IC] Artisan Case - ‘Snaccbox’
« Reply #126 on: Tue, 02 July 2019, 15:34:40 »
Booyah, looks great :)
RAMA M60A
KBDFans Frosted Tofu
Cannon Keys Satisfaction 75
Desk Candy Modern M0110
---
ALF x Scott G60

Offline snelltrail

  • Posts: 197
  • Location: Not CONUS
Re: [IC] Artisan Case - ‘Snaccbox’
« Reply #127 on: Tue, 02 July 2019, 18:26:48 »
This looks so nice! So many nice artisan cases coming up! That founders edition will be pretty hard to pass up though if I can snag one...

Offline SeedyOne

  • Posts: 477
  • Location: Los Angeles
Re: [IC] Artisan Case - ‘Snaccbox’
« Reply #128 on: Tue, 02 July 2019, 20:34:00 »
Love it!


Offline Sycomore

  • Posts: 184
  • Location: The Best State, Australia
Re: [IC] Artisan Case - ‘Snaccbox’
« Reply #129 on: Wed, 03 July 2019, 03:48:12 »
That Founder's Edition looks gorgeous. In regards to the Founder's Edition, what's the go with that? Will it be a limited amount FCFS or will it be for a certain time period? Either way, Founder's Edition or not, 100% in for this!!

Offline EMC Labs

  • Posts: 447
Re: [IC] Artisan Case - ‘Snaccbox’
« Reply #130 on: Wed, 03 July 2019, 07:25:50 »
Hey all, Prototype pics are up!
https://imgur.com/a/9zQmxXV

Show Image


Prototype looks amazing!

Offline BAS1C

  • Thread Starter
  • Posts: 443
  • Location: Calgary, AB
Re: [IC] Artisan Case - ‘Snaccbox’
« Reply #131 on: Thu, 18 July 2019, 09:41:52 »
Hi all, could you please kindly fill out the new IC form? Pricing came in today!

https://docs.google.com/forms/d/e/1FAIpQLSclXSs66SFqOD2Frk2PaiaD_YJlytJpUq4iHQEANL84_Wh0eA/viewform?usp=sf_link

To add some detail on pricing, as I know it is a higher price point. This is a premium item, basically same amount of CNC and material (actually more for the most part) as a full keyboard. So unfortunately can’t do too much on that! Hope to be able to offer it to those who do want it :) just got to get to 50!
« Last Edit: Thu, 18 July 2019, 10:37:13 by BAS1C »

Offline EMC Labs

  • Posts: 447
Re: [IC] Artisan Case - ‘Snaccbox’
« Reply #132 on: Thu, 18 July 2019, 10:11:43 »
Hi all, could you please kindly fill out the new IC form? Pricing came in today!

https://docs.google.com/forms/d/e/1FAIpQLSclXSs66SFqOD2Frk2PaiaD_YJlytJpUq4iHQEANL84_Wh0eA/viewform?usp=sf_link

Oh! That is very expensive.

Great design but I'm out. Good luck!

Offline biothermal

  • Posts: 142
  • Location: Philadelphia, PA
  • Art
Re: [IC] Artisan Case - ‘Snaccbox’
« Reply #133 on: Thu, 18 July 2019, 10:22:29 »
Oh! That is very expensive.

Great design but I'm out. Good luck!

My feelings exactly  :(

Offline crowKAKAWWW

  • Posts: 75
Re: [IC] Artisan Case - ‘Snaccbox’
« Reply #134 on: Thu, 18 July 2019, 10:31:35 »
I guess you get what you pay for as this is definitely one of the nicer artisan cases... but I'm likely out at this price point :(
RAMA M60A
KBDFans Frosted Tofu
Cannon Keys Satisfaction 75
Desk Candy Modern M0110
---
ALF x Scott G60

Offline derznation

  • Posts: 128
  • Location: Montana, United States
Re: [IC] Artisan Case - ‘Snaccbox’
« Reply #135 on: Thu, 18 July 2019, 10:55:46 »
Hi all, could you please kindly fill out the new IC form? Pricing came in today!

https://docs.google.com/forms/d/e/1FAIpQLSclXSs66SFqOD2Frk2PaiaD_YJlytJpUq4iHQEANL84_Wh0eA/viewform?usp=sf_link

To add some detail on pricing, as I know it is a higher price point. This is a premium item, basically same amount of CNC and material (actually more for the most part) as a full keyboard. So unfortunately can’t do too much on that! Hope to be able to offer it to those who do want it :) just got to get to 50!

Good luck hitting MOQ! Little too high for me!

Offline fatpolomanjr

  • Posts: 459
Re: [IC] Artisan Case - ‘Snaccbox’
« Reply #136 on: Thu, 18 July 2019, 11:04:45 »
Hi all, could you please kindly fill out the new IC form? Pricing came in today!

https://docs.google.com/forms/d/e/1FAIpQLSclXSs66SFqOD2Frk2PaiaD_YJlytJpUq4iHQEANL84_Wh0eA/viewform?usp=sf_link

To add some detail on pricing, as I know it is a higher price point. This is a premium item, basically same amount of CNC and material (actually more for the most part) as a full keyboard. So unfortunately can’t do too much on that! Hope to be able to offer it to those who do want it :) just got to get to 50!

The price is high, and I have to wonder if that's just the cost of doing business or the factory charging a high price. If this arrangement was facilitated by Exclusive then I trust the cost is fair.

That said, I'm still in as long as it still holds 80 artisans and has magnets to hold the lid in place. I have 70 artisans that potentially need storage were I to take all of mine off of keyboards, so the number of slots is really important to someone like me. The other option would be Hayt Case v2 x 2, which would store 108 artisans combined and cost $148 x 2.
Some guys keep on saying they believe in Jesus, and keep doing a lot of shameful things.
Current GH Classified Post (LF Arcade Floor, Garbield and CYM Otter and Keyng)

Offline Moistgun

  • Slippery When Wet
  • * Esteemed Elder
  • Posts: 1832
Re: [IC] Artisan Case - ‘Snaccbox’
« Reply #137 on: Thu, 18 July 2019, 11:08:20 »
out of curiosity, what pricepoint did you guys expect?

Offline derznation

  • Posts: 128
  • Location: Montana, United States
Re: [IC] Artisan Case - ‘Snaccbox’
« Reply #138 on: Thu, 18 July 2019, 11:11:35 »
out of curiosity, what pricepoint did you guys expect?

I know it might not be a fair comparison, but sisi case was like $70 so I expected maybe twice that, not 3x+

Offline Moistgun

  • Slippery When Wet
  • * Esteemed Elder
  • Posts: 1832
Re: [IC] Artisan Case - ‘Snaccbox’
« Reply #139 on: Thu, 18 July 2019, 11:14:38 »
out of curiosity, what pricepoint did you guys expect?

I know it might not be a fair comparison, but sisi case was like $70 so I expected maybe twice that, not 3x+

I just think it helps these buys when people jump off the boat for the price, but never say exactly what they expected.

I wonder if shuang got a better price just being chinese?

Offline fatpolomanjr

  • Posts: 459
Re: [IC] Artisan Case - ‘Snaccbox’
« Reply #140 on: Thu, 18 July 2019, 11:25:58 »
I just think it helps these buys when people jump off the boat for the price, but never say exactly what they expected.

I wonder if shuang got a better price just being chinese?

That's a good point. I was hoping for no more than the $120-$180 range. $150-$200 as a stretch.

Some guys keep on saying they believe in Jesus, and keep doing a lot of shameful things.
Current GH Classified Post (LF Arcade Floor, Garbield and CYM Otter and Keyng)

Offline BAS1C

  • Thread Starter
  • Posts: 443
  • Location: Calgary, AB
Re: [IC] Artisan Case - ‘Snaccbox’
« Reply #141 on: Thu, 18 July 2019, 11:50:53 »
I just think it helps these buys when people jump off the boat for the price, but never say exactly what they expected.

I wonder if shuang got a better price just being chinese?

That's a good point. I was hoping for no more than the $120-$180 range. $150-$200 as a stretch.

I received this info today, however am still working on getting it lowered a bit. I do understand it is not cheap, however one has to keep in mind this has about the same manufacturing time as a keyboard, maybe more due to all the slots. Poly is also much more difficult as far as QC and yield than aluminum, so again, an added cost.

I will keep you all updated as things progress with discussions. I will also send the files to a local shop to see what they could do on a smaller basis than 50.

Offline Auxo

  • Formerly CJD_Anthony
  • Posts: 720
  • Location: US
Re: [IC] Artisan Case - ‘Snaccbox’
« Reply #142 on: Thu, 18 July 2019, 13:18:12 »
Although I feel everyone's pain regarding the new price jump. I want to remind everyone that this is a premium box that is intended to house anything from $30 artisans to unobtainable, priceless artisans. A good handful of artisan collectors have collections easily reaching into the thousands (and I never thought myself to be one of them, but here I am LOL) and I want to argue that even at the ~$250 price point, this is nothing but a drop in the bucket for high end artisan collectors. Protect your assets

In this GB, you definitely get what you pay for, and it definitely isn't your run-of-the-mill artisan case.

With that, I'm still in :)

Thank you for the early transparency BAS1C!
UNREALFORCE TKL | KMAC Happy | LSJ Ares | LZ CLS h | NIX Sofia | Noxary X60 | OTD 356 Mini | PFU Limited HHKB Pro 2 (Black) | PFU Limited HHKB Pro 2 Type-S | PFU Limited HHKB JP Type-S | SINGA x TGR Unikorn | TGR 60% | Weaston & nachie GSKT-00 |
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | MIRA SE | TGR Alice | Southpaw Fullsize (pending shipping) | Daily driver: TGR Alice
Collection: Salamander PC, Keycult No1(OG) Salamander TKL, M60A, THE60, Jane V2, LZ MP, LZ GH V2, KC 1/60, OTD 456GT. Kepler, Think 6.5 Brass, Think 6.5 PC, T60, The Raine, F77, E7-V1 SE
Topre Realforce 87U 55g | Corsair K70 w/ MX Browns | Unicomp Ultra Classic
Poker 2 | LZ CE | Leopold FC700R | KMAC 1.2 | EXE | GON NS87 | GON Nerd TKL | Duck Poker | Duck Orion | Realforce 87u 55g | OTD 456GT | LZ B7 | OTD 360C | Ducky G2 Pro | Apple Extended | Apple M0116 | Apple M0116 | Cherry G80-1220HAD | Duck Octagon | HHKB Pro 2 | Duck Unicorn | LZ B8 | LZ RE | ENVKX | OTD 456GT | LZ FE | HHKB Type S | TX1800| Duck Orion V2 | LZ FE | KPad | KMAC Happy | ENVKX | LZ RV | KMAC 2 | Whale | Dolphin | EM7 | TGR Jane | VE.A | DK Saver | Matrix 10xv1.0 | Whale | HHKB BT | Dolphin v2 | EM7 v2 | SSK | SSK (Blue Label) | LZ SQ | Duck Octagon v2 | TX84 | GON Mobik | TX-CP | LZ Ergo2 | KMAC Happy HHKB | TGR 910 | TGR Tris | Matrix 8xv1.2 | KMAC Mini | Mira | Fjell | 356mini | Dolphin GH | EM7 GH | TARO EXENT | Masterkey Pro L Crysta l OTD Koala | Duck Viper | Keycult no.1 | 356mini | 356pad | Matrix 8xv2.0 | 420cl | Matrix 8xv1.0 | Whale Special | Poly Dolphin | Keycult No.2 | FMJ80 | Singa R2 Quickfire Pro | TADA 68 | Novatouch | Whitefox | Octagon v1 | Blackbird | HHKB Pro 2 | KBD75 | VE.A | X60 | Canoe | HHKB Pro 1 | FJELL | Revo One | ALPS64 | Lightsaver v3 | IBM 5140 WKL | Realforce 87u | MIRA SE | Duck Poker | Canoe | Moon | Weaven | M65-A | EXENT | Wooden Planck | Tokyo60| Viper v1 | E6-v2 | IBM SSK | CA66 | TX-CP | SINGA | TGR Alice | FJELL R2 | Klippe | JER-A06 | GSKT-00 | M60-A | Realforce 84u | AL1 | Keycult No. 1 | SaiB-CP | G81-3077SAU | DC60 | Realforce 84ub | TMO50 | G80-1800 | Leaf 80 | LZ GH-v2 | T60 | LZ MP | KMAC Happy | TGR-910RE (Al) | TGR-910RE (PC) | SKB60 | UNIKORN | TGR Jane v2 | Xeno

Offline mbsurfer

  • Posts: 114
  • Location: South Carolina, USA
Re: [IC] Artisan Case - ‘Snaccbox’
« Reply #143 on: Thu, 18 July 2019, 14:06:54 »
I absolutely love the design, but as I said on page 1, my max is at $150 and I have to stick with my limit  :(

Offline Wongstongs

  • Posts: 222
Re: [IC] Artisan Case - ‘Snaccbox’
« Reply #144 on: Thu, 18 July 2019, 14:47:05 »
Although I feel everyone's pain regarding the new price jump. I want to remind everyone that this is a premium box that is intended to house anything from $30 artisans to unobtainable, priceless artisans. A good handful of artisan collectors have collections easily reaching into the thousands (and I never thought myself to be one of them, but here I am LOL) and I want to argue that even at the ~$250 price point, this is nothing but a drop in the bucket for high end artisan collectors. Protect your assets

In this GB, you definitely get what you pay for, and it definitely isn't your run-of-the-mill artisan case.

With that, I'm still in :)

I get what you're trying to say, but how does this offer anymore protection than an evil box with a rubber band around it?

Thank you for the early transparency BAS1C!

Offline Auxo

  • Formerly CJD_Anthony
  • Posts: 720
  • Location: US
Re: [IC] Artisan Case - ‘Snaccbox’
« Reply #145 on: Thu, 18 July 2019, 15:33:15 »
Although I feel everyone's pain regarding the new price jump. I want to remind everyone that this is a premium box that is intended to house anything from $30 artisans to unobtainable, priceless artisans. A good handful of artisan collectors have collections easily reaching into the thousands (and I never thought myself to be one of them, but here I am LOL) and I want to argue that even at the ~$250 price point, this is nothing but a drop in the bucket for high end artisan collectors. Protect your assets

In this GB, you definitely get what you pay for, and it definitely isn't your run-of-the-mill artisan case.

With that, I'm still in :)


Thank you for the early transparency BAS1C!

I get what you're trying to say, but how does this offer anymore protection than an evil box with a rubber band around it?


I wasn't so much referring to the level of protection of this case as compared to others, I was more pointing out that if we spend hundreds/thousands on artisans, then it shouldn't be unreasonable to spend a couple hundred on a nice case. This case is arguably nice than previous ones, but may not necessarily offer more protection by any means. It might though, who knows :)

If we purely wanted a balance between price/protection, any old box would do to be honest.
UNREALFORCE TKL | KMAC Happy | LSJ Ares | LZ CLS h | NIX Sofia | Noxary X60 | OTD 356 Mini | PFU Limited HHKB Pro 2 (Black) | PFU Limited HHKB Pro 2 Type-S | PFU Limited HHKB JP Type-S | SINGA x TGR Unikorn | TGR 60% | Weaston & nachie GSKT-00 |
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | MIRA SE | TGR Alice | Southpaw Fullsize (pending shipping) | Daily driver: TGR Alice
Collection: Salamander PC, Keycult No1(OG) Salamander TKL, M60A, THE60, Jane V2, LZ MP, LZ GH V2, KC 1/60, OTD 456GT. Kepler, Think 6.5 Brass, Think 6.5 PC, T60, The Raine, F77, E7-V1 SE
Topre Realforce 87U 55g | Corsair K70 w/ MX Browns | Unicomp Ultra Classic
Poker 2 | LZ CE | Leopold FC700R | KMAC 1.2 | EXE | GON NS87 | GON Nerd TKL | Duck Poker | Duck Orion | Realforce 87u 55g | OTD 456GT | LZ B7 | OTD 360C | Ducky G2 Pro | Apple Extended | Apple M0116 | Apple M0116 | Cherry G80-1220HAD | Duck Octagon | HHKB Pro 2 | Duck Unicorn | LZ B8 | LZ RE | ENVKX | OTD 456GT | LZ FE | HHKB Type S | TX1800| Duck Orion V2 | LZ FE | KPad | KMAC Happy | ENVKX | LZ RV | KMAC 2 | Whale | Dolphin | EM7 | TGR Jane | VE.A | DK Saver | Matrix 10xv1.0 | Whale | HHKB BT | Dolphin v2 | EM7 v2 | SSK | SSK (Blue Label) | LZ SQ | Duck Octagon v2 | TX84 | GON Mobik | TX-CP | LZ Ergo2 | KMAC Happy HHKB | TGR 910 | TGR Tris | Matrix 8xv1.2 | KMAC Mini | Mira | Fjell | 356mini | Dolphin GH | EM7 GH | TARO EXENT | Masterkey Pro L Crysta l OTD Koala | Duck Viper | Keycult no.1 | 356mini | 356pad | Matrix 8xv2.0 | 420cl | Matrix 8xv1.0 | Whale Special | Poly Dolphin | Keycult No.2 | FMJ80 | Singa R2 Quickfire Pro | TADA 68 | Novatouch | Whitefox | Octagon v1 | Blackbird | HHKB Pro 2 | KBD75 | VE.A | X60 | Canoe | HHKB Pro 1 | FJELL | Revo One | ALPS64 | Lightsaver v3 | IBM 5140 WKL | Realforce 87u | MIRA SE | Duck Poker | Canoe | Moon | Weaven | M65-A | EXENT | Wooden Planck | Tokyo60| Viper v1 | E6-v2 | IBM SSK | CA66 | TX-CP | SINGA | TGR Alice | FJELL R2 | Klippe | JER-A06 | GSKT-00 | M60-A | Realforce 84u | AL1 | Keycult No. 1 | SaiB-CP | G81-3077SAU | DC60 | Realforce 84ub | TMO50 | G80-1800 | Leaf 80 | LZ GH-v2 | T60 | LZ MP | KMAC Happy | TGR-910RE (Al) | TGR-910RE (PC) | SKB60 | UNIKORN | TGR Jane v2 | Xeno

Offline Wongstongs

  • Posts: 222
Re: [IC] Artisan Case - ‘Snaccbox’
« Reply #146 on: Thu, 18 July 2019, 16:12:40 »
Gotchya, makes sense!

Offline SeedyOne

  • Posts: 477
  • Location: Los Angeles
Re: [IC] Artisan Case - ‘Snaccbox’
« Reply #147 on: Thu, 18 July 2019, 18:44:26 »
Although I feel everyone's pain regarding the new price jump. I want to remind everyone that this is a premium box that is intended to house anything from $30 artisans to unobtainable, priceless artisans. A good handful of artisan collectors have collections easily reaching into the thousands (and I never thought myself to be one of them, but here I am LOL) and I want to argue that even at the ~$250 price point, this is nothing but a drop in the bucket for high end artisan collectors. Protect your assets

In this GB, you definitely get what you pay for, and it definitely isn't your run-of-the-mill artisan case.

With that, I'm still in :)

Thank you for the early transparency BAS1C!

Well said, that's more or less how I feel about it too. On the one hand, it's ~$70 more than I'd have hoped but considering what some of us have spent in time (and effort) to amass a collection of artisans that big (80+), it doesn't seem too unreasonable for a high-end, custom made case. I feel as if the "like a custom keyboard" comparison is fair and if the QC is going to be as good as it sounds (probably better than some keyboard GBs), it'll be worth it in the end.

Are there much cheaper options? Absolutely. Is this for everyone...or even average collectors? Absolutely not. Am I still in because I'm a nutjob with a ton of caps that wants a case that feels worthy of how ridiculous my collection is? You bet! All that said, if he can negotiate that price down to the $199 mark it'd probably go over a little better but I understand that it is what it is, especially for a relatively low MOQ (50 vs 150+ for others). Regardless of how it pans out, props to BAS1C for keeping us updated and being up-front with us about logistics  :thumb:

Offline BAS1C

  • Thread Starter
  • Posts: 443
  • Location: Calgary, AB
Re: [IC] Artisan Case - ‘Snaccbox’
« Reply #148 on: Fri, 19 July 2019, 09:55:13 »
Thanks for your replies all! I am working with manufacturer to bring the price down a bit, should hear back in the next day or two.

Offline EMC Labs

  • Posts: 447
Re: [IC] Artisan Case - ‘Snaccbox’
« Reply #149 on: Sun, 21 July 2019, 01:10:45 »
Thanks for your replies all! I am working with manufacturer to bring the price down a bit, should hear back in the next day or two.

Great to hear.