will this fit the HHKB? :llama:
will this fit the HHKB? :llama:
oh you
if you have a viper then i can make one for you
I'd probably get one with the same layout you have (Except with a 2.75 right shift).
Would love to see a more frosted clear option.
will this fit the HHKB? :llama:
oh you
if you have a viper then i can make one for youShow Image(https://sfdcinsea.files.wordpress.com/2014/12/batman-facepalm.gif?w=300&h=210)
That plate looks amazing, the right level of frost for me. What's the thickness?
I'd probably get one with the same layout you have (Except with a 2.75 right shift).
Would love to see a more frosted clear option.
I've actually got this plate in clear. I've decided to sand them for a bit for a slightly frosted look.
will consider sandblasting the plates for a more frosted look
I'd probably get one with the same layout you have (Except with a 2.75 right shift).
Would love to see a more frosted clear option.
I've actually got this plate in clear. I've decided to sand them for a bit for a slightly frosted look.
will consider sandblasting the plates for a more frosted look
It looks good they way you have it now, but if there was a more frosted option that would be great :)
I could be interested if an ISO plate would be made (same layout but ISO enter and short left shift).
Very nice. what endmill are you using?
I could be interested if an ISO plate would be made (same layout but ISO enter and short left shift).
there will be either universal or multiple layouts for this plate during the GB. maybe i'll stick to universal.Very nice. what endmill are you using?
good question. I'll need to get back to you once I've contacted the factory that does this
I could be interested if an ISO plate would be made (same layout but ISO enter and short left shift).
there will be either universal or multiple layouts for this plate during the GB. maybe i'll stick to universal.
I could be interested if an ISO plate would be made (same layout but ISO enter and short left shift).
there will be either universal or multiple layouts for this plate during the GB. maybe i'll stick to universal.
Universal would be a no-go for me, I really dislike the large cutouts in an universal plate. (People have implied that I'm overly sensitive about universal cutouts though, so I wouldn't say this is the general opinion in any way =P).
I could be interested if an ISO plate would be made (same layout but ISO enter and short left shift).
there will be either universal or multiple layouts for this plate during the GB. maybe i'll stick to universal.
Universal would be a no-go for me, I really dislike the large cutouts in an universal plate. (People have implied that I'm overly sensitive about universal cutouts though, so I wouldn't say this is the general opinion in any way =P).
Any idea on pricing? I remember having a thick acrylic plate sorta like this it was amazing and would love to have another.
Any idea on pricing? I remember having a thick acrylic plate sorta like this it was amazing and would love to have another.
maybe around 60 to 65 shipped (tracking included) with packaging to prevent damage during shipping
is the price fair enough?
zennasyndroxx, any chance you are willing to share the CAD file for the Duck Viper plate?
I have lots of acrylic and full time access to a laser cutter.
Would like to make my own plates and would be very much appreciated!
EDIT: I did CAD my own MX Duck Viper plate based on Duck's ALPS plate DXF but would be nice to have something to compare it to.
Any idea on pricing? I remember having a thick acrylic plate sorta like this it was amazing and would love to have another.
maybe around 60 to 65 shipped (tracking included) with packaging to prevent damage during shipping
is the price fair enough?
that sounds fairly reasonable, how thick would they be?
These look really awesome, I would totally be down for one.
Lookin awesome!
Would prefer splitting layouts on at least 2 plates. Prefer simple cuts to an overly universal plate...
Hhkb layout would be sweet as well.
Color me interested! :D
Lookin awesome!
Would prefer splitting layouts on at least 2 plates. Prefer simple cuts to an overly universal plate...
Hhkb layout would be sweet as well.
Color me interested! :D
Thanks!
so, winkeyless with split shift, standard ansi, hhkb with split backspace? hmm.
zennasyndroxx, any chance you are willing to share the CAD file for the Duck Viper plate?
I have lots of acrylic and full time access to a laser cutter.
Would like to make my own plates and would be very much appreciated!
EDIT: I did CAD my own MX Duck Viper plate based on Duck's ALPS plate DXF but would be nice to have something to compare it to.
I don't have one currently :( sorry manAny idea on pricing? I remember having a thick acrylic plate sorta like this it was amazing and would love to have another.
maybe around 60 to 65 shipped (tracking included) with packaging to prevent damage during shipping
is the price fair enough?
that sounds fairly reasonable, how thick would they be?
It's 5mm thick :)These look really awesome, I would totally be down for one.Lookin awesome!
Would prefer splitting layouts on at least 2 plates. Prefer simple cuts to an overly universal plate...
Hhkb layout would be sweet as well.
Color me interested! :D
Thanks!
so, winkeyless with split shift, standard ansi, hhkb with split backspace? hmm.
Any updates?
Could really use a couple of these in my life... ;)
Any updates?
Could really use a couple of these in my life... ;)
Any updates?
Could really use a couple of these in my life... ;)
+1 same here.
Would you guys prefer to get these plates with a pcb?That needs to be optional for me, I already have a PCB to use.
Something that's not in the market right now :p
Not gon
Not winkeyless
Not gh60
Definitely gonna be optional :)Would you guys prefer to get these plates with a pcb?That needs to be optional for me, I already have a PCB to use.
Something that's not in the market right now
Not gon
Not winkeyless
Not gh60
Any chance this can support ALPS in terms of layout and thickness?If there's enough demand for that then maybe yes.
Sent from my iPad using Tapatalk
Would you guys prefer to get these plates with a pcb?Probably just the plate for me.
Something that's not in the market right now
Not gon
Not winkeyless
Not gh60
Would you guys prefer to get these plates with a pcb?
Something that's not in the market right now :p
Not gon
Not winkeyless
Not gh60
I'm afraid that there wouldn't be any PCB bundles for these plates.
However, they will be compatible with bface and sprits so you can grab them from winkeyless etc. Should be compatible with others as well (gh60 and so on)
I'm going to mill other layouts and provide samples for people to try it out.
I've only tried the layout as per OP and I prefer to have people test other layouts before starting this gb
:-\
I'm afraid that there wouldn't be any PCB bundles for these plates.
However, they will be compatible with bface and sprits so you can grab them from winkeyless etc. Should be compatible with others as well (gh60 and so on)
I'm going to mill other layouts and provide samples for people to try it out.
I've only tried the layout as per OP and I prefer to have people test other layouts before starting this gb
:-\
I'm afraid that there wouldn't be any PCB bundles for these plates.
However, they will be compatible with bface and sprits so you can grab them from winkeyless etc. Should be compatible with others as well (gh60 and so on)
I'm going to mill other layouts and provide samples for people to try it out.
I've only tried the layout as per OP and I prefer to have people test other layouts before starting this gb
:-\
This would be awesome with zeal rgb 60 pcb :thumb:
How about support for SMD LEDs? Would help with the new Zeal PCB combined with those who use GON PCBs and use SMDs... (that could just be me)
just a heads up, I won't be getting these made as soon as you guys think but if you would like to experiment with the plate, please let me know and I'll send the required files to you, might need some slight adjustment though
Is this totally dead?
Is this totally dead?
Oh absolutely. Won't be too hard to recreate with some decent knowledge.
E: I'll give it a try tomorrow.
Hope there could be a Alps version. Also, since this plate is 5mm, is gluing needed to hold the switch in place?
Sounds amazing, I was just trying to find some polycarb. That said, isn't 5mm too thick?
Arrowed 60% (as a secondary layout option) pcb and matching plate anyone? xD+1
Arrowed 60% (as a secondary layout option) pcb and matching plate anyone? xD+1
interested in arrowed layout too. I hope this IC's not dead
I've recently have someone to mill this plate for my Duck Mini build. Some pictures of the plate below:Show Image(http://i.imgur.com/m3BWpqi.jpg)Show Image(http://i.imgur.com/F3stZzp.jpg)Show Image(http://i.imgur.com/Hv04mhL.jpg)
And this is what it looks like after it's assembled:Show Image(http://i.imgur.com/cwnlf8j.jpg)Show Image(http://i.imgur.com/FOSWplh.jpg)Show Image(http://i.imgur.com/qjQFBuT.jpg)Show Image(http://i.imgur.com/AMdtqzt.jpg)
Currently my PC supplier has only clear ones, will ask if there's any other color.
Typing test here:
Note that the typing test is done on a Duck Mini V1 case, 55g gateron blacks. The end result with your setup might be different.
That was honey lemon btw. it's nice
Specifications (??) of this plate?
- 5mm in thickness
- Will have universal screw holes to fit your other cases and not only Korean customs!
- Fully CNC Milled plate
Hey man I know this post is super old, but I was wondering if you still make/sell any of these plates. They look amazing on that board you posted pictures of. In fact, I was also somewhat curious what pcb was on that board. Thanks!I second that!I've recently have someone to mill this plate for my Duck Mini build. Some pictures of the plate below:Show Image(http://i.imgur.com/m3BWpqi.jpg)Show Image(http://i.imgur.com/F3stZzp.jpg)Show Image(http://i.imgur.com/Hv04mhL.jpg)
And this is what it looks like after it's assembled:Show Image(http://i.imgur.com/cwnlf8j.jpg)Show Image(http://i.imgur.com/FOSWplh.jpg)Show Image(http://i.imgur.com/qjQFBuT.jpg)Show Image(http://i.imgur.com/AMdtqzt.jpg)
Currently my PC supplier has only clear ones, will ask if there's any other color.
Typing test here:
Note that the typing test is done on a Duck Mini V1 case, 55g gateron blacks. The end result with your setup might be different.
That was honey lemon btw. it's nice
Specifications (??) of this plate?
- 5mm in thickness
- Will have universal screw holes to fit your other cases and not only Korean customs!
- Fully CNC Milled plate
TYL made some 4mm ones
https://ilumkb.com/collections/pcb-and-plate/products/in-stock-tyl-4mm-plate?variant=31926847832146
Xondat has some leftovers on his site still. I have 2 and bought 2 more. They are amazing for hotswap boards.
https://noxary.co/collections/extras/products/5mm-polycarbonate-tray-mount-plate
TYL made some 4mm ones
https://ilumkb.com/collections/pcb-and-plate/products/in-stock-tyl-4mm-plate?variant=31926847832146
Xondat has some leftovers on his site still. I have 2 and bought 2 more. They are amazing for hotswap boards.
https://noxary.co/collections/extras/products/5mm-polycarbonate-tray-mount-plate
Thanks, I just snagged one of those TYL ones. Noxary shipping was a bit much, and I like the fixed layout of the TYL one better.