Author Topic: It's in the mail... (Read 2306956 times)

rowdy · « **Reply #1600 on:** Sun, 07 July 2013, 00:07:28 »

Quote from: Smeagol_RP on Sat, 06 July 2013, 22:43:20

I'm desperately waiting...

MX clears from a GB, springs and stickers from sherryton, caps and stabilizers from WASD, "accessories" from Techkeys, cyrillic set and couple of caps from feng. QFR top panels that a GH user did me a favor forwarding it (thanks man ).

White gasmask cap, IMSTO international legends set, wkl RGB, QFR MX blue, WASD black set, DA 2013, treble case in white, Filco TKL pcb with plate and switches. Also a Schiit Magni that I'm waiting for my cousin's boyfriend's cousin (you got it? )) ship it from Orlando.

Waiting...

That's a lot to be waiting for ... hopefully soon ...

Sifo · « **Reply #1601 on:** Sun, 07 July 2013, 03:33:20 »

Long list, it'll help me remember

In the mail

Geekhack T-shirt (got lost or something)
A crapset from Halverson
Swagling keycap from my proxy
Blue F2 CC whenever the sender isn't busy
Broken cable heading over to TJ's to get fixed
Shaving razor
Pink LEDs

Stuff to pick up from Anson

Kit Kats
Blue EK WASD kit

Stuff coming later

TKL EVA Carrying Case from OTD
Miami set
Cheap doubleshots
GH60

calavera · « **Reply #1602 on:** Sun, 07 July 2013, 07:42:28 »

Quote from: Sifo on Sun, 07 July 2013, 03:33:20

Long list, it'll help me remember

In the mail

Geekhack T-shirt (got lost or something)
A crapset from Halverson
Swagling keycap from my proxy
TKL EVA Carrying Case from OTD
Blue F2 CC whenever the sender isn't busy
Broken cable heading over to TJ's to get fixed
Shaving razor
Pink LEDs

Stuff to pick up from Anson

Kit Kats
Blue EK WASD kit

Stuff coming later

Miami set
Cheap doubleshots
GH60

A lot of the stuff on your list are not even in production yet, how does it qualify as 'in the mail'?

Tym · « **Reply #1603 on:** Sun, 07 July 2013, 07:56:55 »

Quote from: calavera on Sun, 07 July 2013, 07:42:28

Quote from: Elrick on Sun, 07 July 2013, 05:42:52
Quote from: hsu on Sat, 06 July 2013, 09:17:32
Some folks got 30 - unlikely its all for him

Yep it's a business investment. Spend big now to earn huge dividends later. When these get made and shipped out just watch the 'classifieds', you'll see a few going in there for auctions and such.

A lot of the stuff on your list are not even in production yet, how does it qualify as 'in the mail'?

I think you took the wrong quote

)

calavera · « **Reply #1604 on:** Sun, 07 July 2013, 08:35:18 »

yeah how can can this happen? lol its not even from the same thread

Sifo · « **Reply #1605 on:** Sun, 07 July 2013, 09:22:56 »

Quote from: calavera on Sun, 07 July 2013, 08:35:18

yeah how can can this happen? lol its not even from the same thread

Everything except "Stuff Coming Later" is in the mail. I put little sub-headers.

calavera · « **Reply #1606 on:** Sun, 07 July 2013, 09:32:34 »

You sure about the EVA TKL case? I didn't think they were even finished producing them yet.

Sifo · « **Reply #1607 on:** Sun, 07 July 2013, 09:38:32 »

Quote from: calavera on Sun, 07 July 2013, 09:32:34

You sure about the EVA TKL case? I didn't think they were even finished producing them yet.

Not 100% sure on that, I'll have to check later.

Okay, unfortunately you're right

Fixed my post

deepthawt · « **Reply #1608 on:** Sun, 07 July 2013, 10:44:31 »

Quote from: guilleguillaume on Sat, 06 July 2013, 18:59:02

Not really keyboard related but I'll be seating on this chair when the month is over. The chair is a Wilkhahn ON made in Germany.
...
I'm excited! Can't wait to seat on a proper chair. It was a long search for the perfect one and this is it.

I like the way the controls are integrated close to the chair so that it doesn't have knob and lever protrusion everywhere.
Would be real nice in a small space with that cantilever action, would like to see locking feet on it.

Potologue · « **Reply #1609 on:** Sun, 07 July 2013, 18:14:26 »

Waiting for a poker 2 from techkeys.

Sifo · « **Reply #1610 on:** Sun, 07 July 2013, 18:21:28 »

Oh and put 2 keychains coming 1 from techkeys 1 from qwerkeys

missalaire · « **Reply #1611 on:** Mon, 08 July 2013, 22:42:45 »

MLB Boston Red Sox Navy Cap
http://www.amazon.com/gp/product/B000F5KBUE/ref=oh_details_o00_s00_i01?ie=UTF8&psc=1

MKULTRA · « **Reply #1612 on:** Mon, 08 July 2013, 22:43:34 »

GON housing and A.87 just shipped. Cannot wait for it to get here.

BliTzKiN · « **Reply #1613 on:** Mon, 08 July 2013, 23:24:25 »

Awaiting MX clears from calavera, 65g, 62g and stickers from sherryton and a couple of O-rings from WASD. Can't wait to go ergo clears

LETE · « **Reply #1614 on:** Tue, 09 July 2013, 11:05:22 »

My Realforce 104UG hi-pro arrives today.

bigx333 · « **Reply #1615 on:** Tue, 09 July 2013, 11:06:58 »

CCnG, Raindrop, Ergo clears tuned by GON in the way to Alaric, lot's of mail fun

Thimplum · « **Reply #1616 on:** Tue, 09 July 2013, 11:07:47 »

A Teensy 2.0++ from Sparkfun.

badcop · « **Reply #1617 on:** Tue, 09 July 2013, 11:10:34 »

ccng (shipping soon)
GMK RGB (shipping SOON)
3mm flat top leds
imsto poker case - not soon enough
clear switches (shipping soon)

i think thats it. i lose track so easily.

finaltheorem · « **Reply #1618 on:** Tue, 09 July 2013, 11:16:21 »

I've been kind of reckless on eBay lately

So far, I've got the following on the way to me:

Dell AT101W - will be retrobriting the keys and using black VHT Vinyl Dye on the case
Mini SIIG w/ white alps - might be dying the case black on this one too, not quite sure yet. Maybe use RIT dye on the keys as well.
IBM Keyboard M2 w/rubber domes
(2) IBM Model M terminal keyboards w/rj45 connectors (p/n 1392595) - these will be cleaned/retrobrited
(2) Teensy USB Board, V 2.0, with Header Pins
(2) Breadboards + jumper wires

I'm pretty sure my family would stage an intervention if I ordered anything more in the near future so this will have to satisfy my keyboard-collecting urges for a while. Only thing I might need is some sort of enclosure for the finished Soarer's Converter, so if anyone has suggestions as far as that goes I'd love to hear from you.

I'll make make a show-and-tell thread in the media subforum once I've got everything cleaned up/modified. I will probably do a photojournal of my VHT dying and retrobrite processes too.

Thimplum · « **Reply #1619 on:** Tue, 09 July 2013, 11:25:15 »

Quote from: finaltheorem on Tue, 09 July 2013, 11:16:21

I've been kind of reckless on eBay lately

So far, I've got the following on the way to me:
Dell AT101W - will be retrobriting the keys and using black VHT Vinyl Dye on the case
Mini SIIG w/ white alps - might be dying the case black on this one too, not quite sure yet. Maybe use RIT dye on the keys as well.
IBM Keyboard M2 w/rubber domes
(2) IBM Model M terminal keyboards w/rj45 connectors (p/n 1392595) - these will be cleaned/retrobrited
(2) Teensy USB Board, V 2.0, with Header Pins
(2) Breadboards + jumper wires

I'm pretty sure my family would stage an intervention if I ordered anything more in the near future so this will have to satisfy my keyboard-collecting urges for a while. Only thing I might need is some sort of enclosure for the finished Soarer's Converter, so if anyone has suggestions as far as that goes I'd love to hear from you.

I'll make make a show-and-tell thread in the media subforum once I've got everything cleaned up/modified. I will probably do a photojournal of my VHT dying and retrobrite processes too.

WOW. That's a lot of keyboard stuff. As for the enclosure, an Altoids tin and some electrical tape should work nicely.

LETE · « **Reply #1620 on:** Tue, 09 July 2013, 21:19:24 »

I hope you guys enjoy your deliveries. Mine has been delayed due to a faulty doorbell button. There's irony there someplace.

The_Beast · « **Reply #1621 on:** Tue, 09 July 2013, 21:51:39 »

Those

rowdy · « **Reply #1622 on:** Tue, 09 July 2013, 22:35:04 »

Quote from: The_Beast on Tue, 09 July 2013, 21:51:39

Show Image

Those

Ooooo nice :)

Especially since my recent foray into the world of Model M.

So you mind if I ask where you got them from?

The_Beast · « **Reply #1623 on:** Tue, 09 July 2013, 22:47:26 »

Quote from: rowdy on Tue, 09 July 2013, 22:35:04

Quote from: The_Beast on Tue, 09 July 2013, 21:51:39
Show Image

Those

Ooooo nice :)

Especially since my recent foray into the world of Model M.

So you mind if I ask where you got them from?

Good old ebay!

I'm more interested in the cap pullers than anything. They also seem to have black printed alts, which is odd since most seem to come with green printed ones

Melvang · « **Reply #1624 on:** Tue, 09 July 2013, 23:58:49 »

Not in the mail quite yet but have my order placed for Teensy breakout board designed by OldDataHands and a student copy of Solidworks student edition for vets for $20.

bianco · « **Reply #1625 on:** Wed, 10 July 2013, 04:31:36 »

getting more keycaps from keypop

bueller · « **Reply #1626 on:** Wed, 10 July 2013, 04:44:29 »

GMK Esc Pack
GMK purple mods
Filco white keycaps
Full ISO set of Cherry beige/white keys
70 x MX Browns, Teensy clone and alu plate for my custom!

Fun times, going to be busy in a few weeks when all this stuff arrives!

TheSoulhunter · « **Reply #1627 on:** Wed, 10 July 2013, 07:21:09 »

- Two HKKBs
- Titanium Keycaps
- Smith & Wesson MP5LS

rao2100 · « **Reply #1628 on:** Wed, 10 July 2013, 09:07:56 »

LZ-S
GMK Esc Pack
EK Cherry Keycaps

finaltheorem · « **Reply #1629 on:** Wed, 10 July 2013, 11:00:25 »

Quote from: Thimplum on Tue, 09 July 2013, 11:25:15

Quote from: finaltheorem on Tue, 09 July 2013, 11:16:21
I've been kind of reckless on eBay lately

So far, I've got the following on the way to me:
Dell AT101W - will be retrobriting the keys and using black VHT Vinyl Dye on the case
Mini SIIG w/ white alps - might be dying the case black on this one too, not quite sure yet. Maybe use RIT dye on the keys as well.
IBM Keyboard M2 w/rubber domes
(2) IBM Model M terminal keyboards w/rj45 connectors (p/n 1392595) - these will be cleaned/retrobrited
(2) Teensy USB Board, V 2.0, with Header Pins
(2) Breadboards + jumper wires

I'm pretty sure my family would stage an intervention if I ordered anything more in the near future so this will have to satisfy my keyboard-collecting urges for a while. Only thing I might need is some sort of enclosure for the finished Soarer's Converter, so if anyone has suggestions as far as that goes I'd love to hear from you.

I'll make make a show-and-tell thread in the media subforum once I've got everything cleaned up/modified. I will probably do a photojournal of my VHT dying and retrobrite processes too.

WOW. That's a lot of keyboard stuff. As for the enclosure, an Altoids tin and some electrical tape should work nicely.

Thanks, that sounds like a neat low-cost solution. For some reason I was thinking I should make a big case with ports for everything (PS/2, XT, AT, RJ-45) built in, but I think it makes more sense to just splice some cables and convert everything to PS/2 and take that into a little Altoids tin.

Tarzan · « **Reply #1630 on:** Wed, 10 July 2013, 11:33:41 »

Quote from: finaltheorem on Wed, 10 July 2013, 11:00:25

Quote from: Thimplum on Tue, 09 July 2013, 11:25:15
Quote from: finaltheorem on Tue, 09 July 2013, 11:16:21
I've been kind of reckless on eBay lately

So far, I've got the following on the way to me:
Dell AT101W - will be retrobriting the keys and using black VHT Vinyl Dye on the case
Mini SIIG w/ white alps - might be dying the case black on this one too, not quite sure yet. Maybe use RIT dye on the keys as well.
IBM Keyboard M2 w/rubber domes
(2) IBM Model M terminal keyboards w/rj45 connectors (p/n 1392595) - these will be cleaned/retrobrited
(2) Teensy USB Board, V 2.0, with Header Pins
(2) Breadboards + jumper wires

I'm pretty sure my family would stage an intervention if I ordered anything more in the near future so this will have to satisfy my keyboard-collecting urges for a while. Only thing I might need is some sort of enclosure for the finished Soarer's Converter, so if anyone has suggestions as far as that goes I'd love to hear from you.

I'll make make a show-and-tell thread in the media subforum once I've got everything cleaned up/modified. I will probably do a photojournal of my VHT dying and retrobrite processes too.

WOW. That's a lot of keyboard stuff. As for the enclosure, an Altoids tin and some electrical tape should work nicely.

Thanks, that sounds like a neat low-cost solution. For some reason I was thinking I should make a big case with ports for everything (PS/2, XT, AT, RJ-45) built in, but I think it makes more sense to just splice some cables and convert everything to PS/2 and take that into a little Altoids tin.

The Teensy people make a nice little mini-USB to female USB B panel jumper, which is just about a perfect match for the stock cable opening on a Model M case. You might want to look into one of these, it would allow you to use a standard USB A-B cable to connect the keyboard. Assuming you're planning on an internal Teensy adapter, that is...

http://www.pjrc.com/store/cable_usb_panel_micro.html

LETE · « **Reply #1631 on:** Wed, 10 July 2013, 19:00:33 »

It wasn't the doorbell's fault. The FedEx guy was here 10 minutes ago while I was right on the other side of the door and still got a door tag. He must not even knock! Darn you elitekeyboards for requiring a signature!!!!!!!!!!!!!!

oTurtlez · « **Reply #1632 on:** Thu, 11 July 2013, 10:31:26 »

RF 87U Type - S

Can't wait for her to arrive.

insilica · « **Reply #1633 on:** Thu, 11 July 2013, 11:06:15 »

Quote from: oTurtlez on Thu, 11 July 2013, 10:31:26

RF 87U Type - S Can't wait for her to arrive.

Ooooh. Great purchase. I hope you come to love yours as I do mine.

4LI4Z · « **Reply #1634 on:** Thu, 11 July 2013, 11:06:50 »

IBM Model M SSK!

TD22057 · « **Reply #1635 on:** Thu, 11 July 2013, 11:07:21 »

Stainless steel plates for my custom split hand matrix keyboard are on the way! Along w/ a micro usb female->male cable (to use as the case->teensy) and a small unpowered usb hub (going to add a hub if it's small enough to fit) from ebay.

VesperSAINT · « **Reply #1636 on:** Thu, 11 July 2013, 14:13:48 »

Also have stainless steel plate coming in for my QFR for lubed vintage blacks with 62g springs! Can't wait!

codyeatworld · « **Reply #1637 on:** Thu, 11 July 2013, 16:27:40 »

My order from GON! And assembly stuff.

Photekq · « **Reply #1638 on:** Thu, 11 July 2013, 17:26:12 »

Quote from: codyeatworld on Thu, 11 July 2013, 16:27:40

My order from GON! And assembly stuff.

Show Image

That is a very nice photo.

yearn4 · « **Reply #1639 on:** Thu, 11 July 2013, 21:31:35 »

Silver whale
wnv keycaps
aluminum frame for my htc one

Dubsgalore · « **Reply #1640 on:** Thu, 11 July 2013, 22:09:50 »

Quote from: codyeatworld on Thu, 11 July 2013, 16:27:40

My order from GON! And assembly stuff.

Show Image

looks great, matching pink kittypad and 38gt
can't wait for the assembled side by side pic

some more 60% lovin

snoopy · « **Reply #1641 on:** Fri, 12 July 2013, 17:47:17 »

IBM Model F AT

Lastpilot · « **Reply #1642 on:** Fri, 12 July 2013, 23:58:02 »

Scope Node Black Wireless Mouse and Orico AMP-T01 Black Aluminum Mousepad! Will do a review once I get them both together

codyeatworld · « **Reply #1643 on:** Sat, 13 July 2013, 00:06:36 »

Quote from: Dubsgalore on Thu, 11 July 2013, 22:09:50

Quote from: codyeatworld on Thu, 11 July 2013, 16:27:40
My order from GON! And assembly stuff.

Show Image

looks great, matching pink kittypad and 38gt
can't wait for the assembled side by side pic

some more 60% lovin

Thanks sir, I can't wait to assemble them either!!

rowdy · « **Reply #1644 on:** Sat, 13 July 2013, 01:23:38 »

5.5mm socket driver so I can open my Model Ms.

sigh So near and yet so far ...

Dubsgalore · « **Reply #1645 on:** Sat, 13 July 2013, 01:48:50 »

last thing in the mail...extra tips for my iron

SpAmRaY · « **Reply #1646 on:** Sat, 13 July 2013, 06:28:38 »

Quote from: Dubsgalore on Sat, 13 July 2013, 01:48:50

last thing in the mail...extra tips for my iron

What tips did you get? I ordered some odd ball ones just to try them out!

ApocalypseMaow · « **Reply #1647 on:** Sat, 13 July 2013, 06:55:36 »

Should have a Phantom in the mail... Payed for it on the 5th. Seller contacted me that he didn't get it shipped out on the 7th and haven't heard from him since. Sad panda

meiosis · « **Reply #1648 on:** Sat, 13 July 2013, 07:10:31 »

Got a Nvidia 770 coming

. +Waterblockkk Computer almost complete(never will be)

Photoelectric · « **Reply #1649 on:** Sat, 13 July 2013, 11:09:25 »

2 universal TKL plates for my Filcos. Waiting... waiting...

News:

Author Topic: It's in the mail... (Read 2306956 times)