FCFS. :-\Better set that timer!
Show Image(https://i.imgur.com/IV29byG.jpg)Show Image(https://i.imgur.com/dqxFrWD.jpg)
The slots for the GB will be allocated by FCFS. 30 units will be available. I will share the link here on the 10th of September, 12PM Eastern Time.
More information about 910 Project
TGR-910 GB https://geekhack.org/index.php?topic=86047.0
TGR-910 CE IC https://geekhack.org/index.php?topic=91446.0
Poisonking's 910 http://imgur.com/a/tmk9W
Final design/render:Show Image(https://i.imgur.com/JMeTYLg.jpg)MoreShow Image(https://i.imgur.com/2ds2WPm.jpg)Show Image(https://i.imgur.com/TJoTe4j.jpg)Show Image(https://i.imgur.com/epBt1O5.jpg)Show Image(https://i.imgur.com/DztwHZo.jpg)Show Image(https://i.imgur.com/jKxzNvg.jpg)
Supported layouts:Show Image(http://i.imgur.com/egLkQZa.jpg)
Specifications:
- Full Kobelco 5052 aluminum case
- 8 degrees slope
- Brass weight
- Brass blocker at 910 logo cutout
- Plate material: sand-blasted brass
- ISO and ANSI
- Custom ps2avrGB PCB
- Fully Programmable
- Full LED backlighting
- Controller parts, diodes and resistors are presoldered
Color options:
Black, Grey and PinkShow Image(https://i.imgur.com/twYZ8yp.jpg)
- Black/GreyShow Image(https://i.imgur.com/SNBE41a.jpg)
- Pink
Price: (excluding paypal fees and shipping)
$334 for case + plate + PCB (presoldered with all the components except for switches, switch LEDs and RED LEDs)
$80 for brass plate + PCB (presoldered with all the components except for switches, switch LEDs and RED LEDs)
$15 for RGB Kit (RGB LEDs, acrylic diffuser for case and 910 cutout)
Shipping: Shipping will be from Malaysia. Shipping cost will depend on your location. Each set weighs about 3.5 kg with packaging. Shipping fee will be invoiced only after the keyboards are ready. Estimated shipping cost (US 60$, Asia 45$, Europe $55)
Deadline for order/payment: The groupbuy will end as soon as the MOQ is met, would appreciate if I am able to receive the payment asap.
Lead time: 8-10 weeks from the week of 18th September
Thank you!
Assuming you win, what color will you guys go with? Debating black vs pink.
Assuming you win, what color will you guys go with? Debating black vs pink.Pink top and black bottom.
Assuming you win, what color will you guys go with? Debating black vs pink.
pink for rarity factor
too many basic nerds going for black or grey
It's true. I'm too basic to pick pinkAssuming you win, what color will you guys go with? Debating black vs pink.
pink for rarity factor
too many basic nerds going for black or grey
Pink is obviously very nice, but not sure if it's hard to match with keycaps. Do pink case go well with non-white/beige keysets?
Pink is obviously very nice, but not sure if it's hard to match with keycaps. Do pink case go well with non-white/beige keysets?
dolch
Pink is obviously very nice, but not sure if it's hard to match with keycaps. Do pink case go well with non-white/beige keysets?
dolch
Gross.
Pink is obviously very nice, but not sure if it's hard to match with keycaps. Do pink case go well with non-white/beige keysets?
dolch
Looking really nice. Too bad it's such a limited release.
I saw this thread, my mouth started watering, I got super excited, reading through the post.
I see that it's FCFS, I look at the time the GB opens, and I cry.
I am literally scheduled to hit the show open playback cue on the RLCS at that exact time... **** me lol
Not going to offer an option for diff color of top/bottom. Because it's going to make the color matching process a lot more difficult for those who ordered the same top/bottom color. Sorry.Assuming you win, what color will you guys go with? Debating black vs pink.Pink top and black bottom.
Anyone got any pictures of how the brass plates color will look.I actually have a sample with me. Will share it later when I have a better internet connection.
Does the TGR 910 CE have the same height and shape as the TGR Tris Numpad?They are basically the same except the Tris has an extra row.
Will the order form be posted in form of a new post or in the original post?I am thinking of updating it to the original post. Or new post would be a better idea?
Can I join again?I don't encourage that. I do allow you to trade your SE with my CE though. What color do you want?
Sent from my SM-G935F using Tapatalk
I am thinking of updating it to the original post. Or new post would be a better idea?
I support that idea, Im trying my luck on mobile today because Im on vacation.
I am thinking of updating it to the original post. Or new post would be a better idea?
I'd suggest posting it on top of the 1st post. Just move the pictures down a bit, and that way when people refresh the page they will see the order form when it's up. It will be much harder to look through the page(s) of this thread. Esp for those who also are on mobile or simular.
In the Case, PCB and Plate combo - is the plate included a brass plate?
Plate material: sand-blasted brassFrom OP, so I assume so
Can I join again?I don't encourage that. I do allow you to trade your SE with my CE though. What color do you want?
Sent from my SM-G935F using Tapatalk
I'm just joking. I can't even put the SE off my desk for more than a day.Can I join again?I don't encourage that. I do allow you to trade your SE with my CE though. What color do you want?
Sent from my SM-G935F using Tapatalk
i really like this colorwayI agree that it is a lovely colourware. Thx for the compliment m8 (https://uploads.tapatalk-cdn.com/20170910/c5a3b557afd8b9e483d0282ef02d1b68.jpg)
(Attachment Link)
I would do terrible, unspeakable things for a polycarb 910CELike stay up all night? Because that is the only **** you need to do calm your tits.
Alright, bro. Btw, this is what the finishing of the brass plate gonna look like
I am thinking of updating it to the original post. Or new post would be a better idea?
I really like posting it on top of the 1st post. Just move the pictures down a bit, and that way when people refresh the page they will see the order form when it's up. It will be much harder to look through the page(s) of this thread. Esp for those who also are on mobile or simular.
Alright, bro. Btw, this is what the finishing of the brass plate gonna look like
I am thinking of updating it to the original post. Or new post would be a better idea?
I really like posting it on top of the 1st post. Just move the pictures down a bit, and that way when people refresh the page they will see the order form when it's up. It will be much harder to look through the page(s) of this thread. Esp for those who also are on mobile or simular.Show Image(https://i.imgur.com/TsoFJYu.png)
Show Image(https://i.imgur.com/TsoFJYu.png)
Hope I made it
I was in such a rush I forgot to fill in my full name...
Just curious, why was the rgb kit not recommended?
Good luck everyone!
Sent from my Nexus 6P using Tapatalk
I was in such a rush I forgot to fill in my full name...
I did the exact same thing :))
I was in such a rush I forgot to fill in my full name...Don't worry you can edit it later.
Just curious, why was the rgb kit not recommended?RGB isn't really pratical imo.
Good luck everyone!
Sent from my Nexus 6P using Tapatalk
Hi, I have stopped accepting any more order submission. The cutoff time was at around 12:01:07 ET
Had a long drive back from hometown today, gonna hit the bed now and will start invoice tomorrow.
Love you, guys! Enjoy the rest of your weekend!
Hi, I have stopped accepting any more order submission. The cutoff time was at around 12:01:07 ET
Had a long drive back from hometown today, gonna hit the bed now and will start invoice tomorrow.
Love you, guys! Enjoy the rest of your weekend!
No list so we can at least see if we got in?
Oh well.
I was in such a rush I forgot to fill in my full name...
I did the exact same thing :))
+2 I totally forgot my own name for a moment because my brain was stopped working.
What's that ergo board anyway? It looks so good! :eek:
Hi, I have stopped accepting any more order submission. The cutoff time was at around 12:01:07 ET
Had a long drive back from hometown today, gonna hit the bed now and will start invoice tomorrow.
Love you, guys! Enjoy the rest of your weekend!
i really like this colorwayI agree that it is a lovely colourware. Thx for the compliment m8
(Attachment Link)Show Image(https://uploads.tapatalk-cdn.com/20170910/c5a3b557afd8b9e483d0282ef02d1b68.jpg)
Sent from my SM-G935F using Tapatalk
I'm just gonna assume I lost so I can relax lol. The email I got is dated 9:01(PT), but I expect it's still too late.Hmm mine was :02 so I guess I'm cut off for sure then. C'est la guerre
Hi, I have stopped accepting any more order submission. The cutoff time was at around 12:01:07 ET
Had a long drive back from hometown today, gonna hit the bed now and will start invoice tomorrow.
Love you, guys! Enjoy the rest of your weekend!
I'm just gonna assume I lost so I can relax lol. The email I got is dated 9:01(PT), but I expect it's still too late.Same. I wish email delivery time was displayed down to the seconds.
Thanks for sharing! Exciting times await us I guess. Looking forward to Alice!What's that ergo board anyway? It looks so good! :eek:
IIRC thats the TGR Alice that was first teased slightly in the TGR Tris GB thread. Looks like there's a physical model now.
I'm just gonna assume I lost so I can relax lol. The email I got is dated 9:01(PT), but I expect it's still too late.Same. I wish email delivery time was displayed down to the seconds.
I'm just gonna assume I lost so I can relax lol. The email I got is dated 9:01(PT), but I expect it's still too late.Same. I wish email delivery time was displayed down to the seconds.
Mine is 12:01:07 :eek: :eek: :eek: :eek: :eek: :eek:
I switched to classic view and view header since I checked via mobile. Looks like I'm 45 seconds late. Honestly not that surprised since the thread was struggling to load at 12:00 on the dot so I got a late start.I'm just gonna assume I lost so I can relax lol. The email I got is dated 9:01(PT), but I expect it's still too late.Same. I wish email delivery time was displayed down to the seconds.
If you are using gmail like me, you can click on the drop down arrow on the google form email and click "show original" and check the "received" field. I'm sure other email services have that too.
Slept through my alarm for the first time in years. Of course. :rolleyes:
Whelp, grats to those that got in.
Will there be brass inserts for the 910 logo? That would be so nice!
How do we know if we got in?
Cheers for the picture. Good color of Brass I likeAlright, bro. Btw, this is what the finishing of the brass plate gonna look like
I am thinking of updating it to the original post. Or new post would be a better idea?
I really like posting it on top of the 1st post. Just move the pictures down a bit, and that way when people refresh the page they will see the order form when it's up. It will be much harder to look through the page(s) of this thread. Esp for those who also are on mobile or simular.Show Image(https://i.imgur.com/TsoFJYu.png)
Did I winned?
Did I winned?
Ur mam winned.
Any spreadsheet with the first 30 lucky ones?
So what is the cutoff time to pay invoices? There should be one I guess :pI don't really have one normally, as soon as possible?
Are the invoices out? So everybody without one yet was too late?
So what is the cutoff time to pay invoices? There should be one I guess :pI don't really have one normally, as soon as possible?
Yeah, I just had the time to look at the spreadsheet right now.Are the invoices out? So everybody without one yet was too late?
I suspect if the invoices were going out, more people would be posting about it and Yutski would have said something.
Yeah, I just had the time to look at the spreadsheet right now.Are the invoices out? So everybody without one yet was too late?
I suspect if the invoices were going out, more people would be posting about it and Yutski would have said something.
Invoices will be sent within the next hour.
All invoices are out, ideally, I am hoping to receive all payments by Friday. But if you have difficulty paying before that, do dm me. We may be able to work something out.
Btw, I've accounted approx. 12$ for packaging, so we should be expecting more interesting than the previous rounds. Not sure about the sleeve, but I should be able to throw in a few ml of Zack's secret switch lube.
Payment will be submitted to the manufacturer on Monday. Let's hope everything will go well and we can have another round of 910CE GB in November, for those who didn't make it this round. If things go as planned, that might be the last GB from TGR. Hopefully. :blank:
Once again, thank you all for the overwhelming response <3
Yuktsi's last moment with my super smooth alice :pHaih got scammed. Give me Robin :mad:Show Image(https://i.imgur.com/dqcrVqk.jpg)
Something for everyone to look forward to after the 910
Yuktsi's last moment with my super smooth alice :pShow Image(https://i.imgur.com/dqcrVqk.jpg)
Something for everyone to look forward to after the 910
Yuktsi's last moment with my super smooth alice :pShow Image(https://i.imgur.com/dqcrVqk.jpg)
Something for everyone to look forward to after the 910
Yuktsi's last moment with my super smooth alice :pShow Image(https://i.imgur.com/dqcrVqk.jpg)
Something for everyone to look forward to after the 910Show Image(http://i.imgur.com/SGaMufd.jpg)
All invoices are out, ideally, I am hoping to receive all payments by Friday. But if you have difficulty paying before that, do dm me. We may be able to work something out.
Btw, I've accounted approx. 12$ for packaging, so we should be expecting more interesting than the previous rounds. Not sure about the sleeve, but I should be able to throw in a few ml of Zack's secret switch lube.
Payment will be submitted to the manufacturer on Monday. Let's hope everything will go well and we can have another round of 910CE GB in November, for those who didn't make it this round. If things go as planned, that might be the last GB from TGR. Hopefully. :blank:
Once again, thank you all for the overwhelming response <3
:( sad that I missed it..probably wasted 5 sec to make sure info(address, phone, etc) filled in is correct. Didn't know that we can just fill it out loosely and modify later. Oh well, congrats to people who got in.
Really curious to see the speadsheet about position!
Also yuktsi, will the next round favor people like me who is a few secs late this time?
Thanks!All invoices are out, ideally, I am hoping to receive all payments by Friday. But if you have difficulty paying before that, do dm me. We may be able to work something out.
Btw, I've accounted approx. 12$ for packaging, so we should be expecting more interesting than the previous rounds. Not sure about the sleeve, but I should be able to throw in a few ml of Zack's secret switch lube.
Payment will be submitted to the manufacturer on Monday. Let's hope everything will go well and we can have another round of 910CE GB in November, for those who didn't make it this round. If things go as planned, that might be the last GB from TGR. Hopefully. :blank:
Once again, thank you all for the overwhelming response <3
Didn't know that we can just fill it out loosely and modify later.
Didn't know that we can just fill it out loosely and modify later. Oh well, congrats to people who got in.
I hope its done FCFS again, but with those who entered and won this round disqualified. I don't think there should be any favoring. That's a topic when the next gb comes around anyway, it's still 2 months away.
To be fair, I filled it out accurately and completely and still got in.I hope its done FCFS again, but with those who entered and won this round disqualified. I don't think there should be any favoring. That's a topic when the next gb comes around anyway, it's still 2 months away.
Disqualifying people is itself favoring. Not saying I disagree with you, but your first two sentences seem at odds to me. FCFS inherently favors people who are faster, but disqualifying the last winners is systematically favoring the second fastest group over the fastest group lol.
I don't have any particular rules when comes to a situation like this or payment deadline. I am not completely unbias either, but I am prioritizing those who haven't owned one before and try to accommodate as many as possible.To be fair, I filled it out accurately and completely and still got in.I hope its done FCFS again, but with those who entered and won this round disqualified. I don't think there should be any favoring. That's a topic when the next gb comes around anyway, it's still 2 months away.
Disqualifying people is itself favoring. Not saying I disagree with you, but your first two sentences seem at odds to me. FCFS inherently favors people who are faster, but disqualifying the last winners is systematically favoring the second fastest group over the fastest group lol.
That is not what it means to favor someone. You are also assuming there are no people who just missed the start or were busy.
His point was that people who tried and lost this time should not get extra bias, people who already have one should be back of the bus.
Also if you read back a few pages I'm pretty sure Yuktsi was asked by someone with an R1 if they could participate and they were told if they trade in the current one, so I am under the assumption that system would continue.
Can the next one not be at 2am pls :blank:
The amount of times Ive got up in the middle of the night or had a "toilet break" during the day for Brocaps and other things.Can the next one not be at 2am pls :blank:
It's always 2am somewhere, unfortunately.
Will you be open for different colours for the next buy? Silver wasn't an option this time, just wondering if there is a possiblity that the colours might change next time?I will if there's a demand.
Is there anyway to get a board to have the same finish as the sandblasted brass plate from the Alice picture? I love how its a muted gold. I'd instabuy.Will you be open for different colours for the next buy? Silver wasn't an option this time, just wondering if there is a possiblity that the colours might change next time?I will if there's a demand.
Will you be open for blue and silver?
Will you be open for blue and silver?
cerakote is pretty dope. I wish I can find an applicator here in Malaysia. :'(Will you be open for blue and silver?
Or cerakote white, like the norbauer case.
Will you be open for blue and silver?This! I really like that pair
Will you be open for blue and silver?This! I really like that pair
silver in the render looks so good
Will you be open for different colours for the next buy? Silver wasn't an option this time, just wondering if there is a possiblity that the colours might change next time?I will if there's a demand.
silver in the render looks so goodAye I went for silver in the IC too
the wait for this is gonna kill me more than any other single keyboard thing.Vintage black :-*
It will give me time to buy switches but that wont burn a single bit of time and I already got many many many keysets and brocaps to dress it up with.
Actually unsure what switches I'll go for.
the wait for this is gonna kill me more than any other single keyboard thing.
It will give me time to buy switches but that wont burn a single bit of time and I already got many many many keysets and brocaps to dress it up with.
Actually unsure what switches I'll go for.
the wait for this is gonna kill me more than any other single keyboard thing.Vintage black :-*
It will give me time to buy switches but that wont burn a single bit of time and I already got many many many keysets and brocaps to dress it up with.
Actually unsure what switches I'll go for.
Vintage black :-*
the wait for this is gonna kill me more than any other single keyboard thing.Vintage black :-*
It will give me time to buy switches but that wont burn a single bit of time and I already got many many many keysets and brocaps to dress it up with.
Actually unsure what switches I'll go for.
Im going to put Tealios in mine.
the wait for this is gonna kill me more than any other single keyboard thing.Vintage black :-*
It will give me time to buy switches but that wont burn a single bit of time and I already got many many many keysets and brocaps to dress it up with.
Actually unsure what switches I'll go for.
Im going to put Tealios in mine.Show Image(https://i.imgur.com/HkymH47.jpg)
the wait for this is gonna kill me more than any other single keyboard thing.Vintage black :-*
It will give me time to buy switches but that wont burn a single bit of time and I already got many many many keysets and brocaps to dress it up with.
Actually unsure what switches I'll go for.
Im going to put Tealios in mine.Show Image(https://i.imgur.com/HkymH47.jpg)
Wow I missed this by about... 4 days :(
Pardon my ignorance but what does CE stand for?
I got bored and went through the 910 GB thread and noticed there were delays with people who choose grey/black colours. Could you say it might happen with this GB yuktsi?
Can I get an anseer yuktsi? Looks like it got burried from all these "I want this colour" posts.I got bored and went through the 910 GB thread and noticed there were delays with people who choose grey/black colours. Could you say it might happen with this GB yuktsi?
Hi lunr, I've told them to be extra careful. Hope everything will go smoothly this round.Can I get an anseer yuktsi? Looks like it got burried from all these "I want this colour" posts.I got bored and went through the 910 GB thread and noticed there were delays with people who choose grey/black colours. Could you say it might happen with this GB yuktsi?
This is most likely something he could not tell you at this moment, as it came as a surprise before. If you read the posts about the delays then you knows it was an issue with damage due to mishandling. Not really possible to foresee this kind of info.
Hi lunr, I've told them to be extra careful. Hope everything will go smoothly this round.Can I get an anseer yuktsi? Looks like it got burried from all these "I want this colour" posts.I got bored and went through the 910 GB thread and noticed there were delays with people who choose grey/black colours. Could you say it might happen with this GB yuktsi?
This is most likely something he could not tell you at this moment, as it came as a surprise before. If you read the posts about the delays then you knows it was an issue with damage due to mishandling. Not really possible to foresee this kind of info.
Is there any numbers of how many ordered black/grey/pink? Would be interesting to see :)Around 40% Grey, 30% grey and 30% pink :cool:
Is there any numbers of how many ordered black/grey/pink? Would be interesting to see :)Around 40% Grey, 30% grey and 30% pink :cool:
Sorry! I meant 40% grey, 30% black and 30% pinkIs there any numbers of how many ordered black/grey/pink? Would be interesting to see :)Around 40% Grey, 30% grey and 30% pink :cool:
I guess you meant 40% black, 30% grey and 30% pink ;D
Sorry! I meant 40% grey, 30% black and 30% pinkIs there any numbers of how many ordered black/grey/pink? Would be interesting to see :)Around 40% Grey, 30% grey and 30% pink :cool:
I guess you meant 40% black, 30% grey and 30% pink ;D
11th September 2017 - Invoices sent
18th September 2017 - Payment received
19th September 2017 - Materials ordered
4th October 2017 - PCB Ordered
Hi guys.
If you read the IC you might have seen that I wanted to make a QMK PCB for this, well, I've got them finished and tested. The MOQ for the PCB maker was 5, so I have 3 leftover PCBs.
If anyone is interested in one of them please PM me, I'm just trying to recoup my losses, so they'll be 35€ plus shipping each, this includes fees but not shipping and packaging (shipping is 6.20€ tracked, packaging is free if I can find enough boxes or whatever it costs me (probably 1-2€ per package) if I don't.
The PCBs do NOT support in switch LEDs and do NOT support RGB underglow/logo lighting. They do, however, support all the layouts this case supports.
Edit: All gone
There are two microcontrollers that are commonly used for our custom keyboards, the 32u4 (used for QMK,TMK and O2D) and the 32a (used for BootmapperClient/ps2avrGB and Jigon).
From my personal observations I came to the conclusion that the time from when you press the key to when it registers on the computer on 32a implementations is a bit longer than on 32u4 implementations.
In the grand scheme of things this does not matter for 99% of users, but if you are playing rhythm games with very tight timing windows and are used to the faster one it makes a very big difference.
Let's say your timing window is 30ms, which means there are 15ms before and after the perfect timing that it still counts, let's just assume the increased delay is 5ms higher (this is NOT the actual value as I can't accurately measure it). This effectively makes your hitwindow 5ms smaller as well as making every hitsound appear 5ms later than you'd expect it, which will make everything feel wrong.
Q: "I don't play these games, why would I care?"
A: If you don't use any of the other features QMK offers that BMC or Jigon do not offer you have no reason to, even for normal competetive gaming it does not make any significant difference.
-snip-I'm in for one or two.
Hey Yuktsi, you still thinking of doing a second round of the 910CE's? I think I remember you mentioning that you were considering doing a second round around November?Nothing concrete yet. I’m thinking of doing polycarbonate 910CE instead. Let’s see how this round goes.
Hey Yuktsi, you still thinking of doing a second round of the 910CE's? I think I remember you mentioning that you were considering doing a second round around November?Nothing concrete yet. I’m thinking of doing polycarbonate 910CE instead. Let’s see how this round goes.
Sent from my iPhone using Tapatalk
YES PLSSSSSSHey Yuktsi, you still thinking of doing a second round of the 910CE's? I think I remember you mentioning that you were considering doing a second round around November?Nothing concrete yet. I’m thinking of doing polycarbonate 910CE instead. Let’s see how this round goes.
Sent from my iPhone using Tapatalk
HOT DAMN
I’m thinking of doing polycarbonate 910CE instead
Hey Yuktsi, you still thinking of doing a second round of the 910CE's? I think I remember you mentioning that you were considering doing a second round around November?Nothing concrete yet. I’m thinking of doing polycarbonate 910CE instead. Let’s see how this round goes.
Sent from my iPhone using Tapatalk
yuktsi can you give an update to your other projects? It's been more than a month without communication. Thanks.Yuktsi posted an update yesterday and said he is going to update us soon again..
yuktsi can you give an update to your other projects? It's been more than a month without communication. Thanks.Yuktsi posted an update yesterday and said he is going to update us soon again..
yuktsi can you give an update to your other projects? It's been more than a month without communication. Thanks.Yuktsi posted an update yesterday and said he is going to update us soon again..
Probably means Tris and 910.
Posting in threads asking about updates on other projects?
Wat
For anyone who curious about 910 Poly, here's the album :p
https://flic.kr/s/aHskr7FWcf (https://flic.kr/s/aHskr7FWcf)
(https://farm5.staticflickr.com/4577/38228020332_a88158a8c0_h.jpg) (https://flic.kr/p/21f5AAQ)
For anyone who curious about 910 Poly, here's the album :p
https://flic.kr/s/aHskr7FWcf (https://flic.kr/s/aHskr7FWcf)
(https://farm5.staticflickr.com/4577/38228020332_a88158a8c0_h.jpg) (https://flic.kr/p/21f5AAQ)
For anyone who curious about 910 Poly, here's the album :p
For anyone who curious about 910 Poly, here's the album :p
Always curious how someone got something that didn't open for the GB.
Private deals made me so jealous. :'(
When will this GB start? Any links?
When will this GB start? Any links?
just wait for 910 CE Poly, maybe after alu CE shipped
910 ce was 67sec
When will this GB start? Any links?
just wait for 910 CE Poly, maybe after alu CE shipped
I can only hope to fill in the efing form in less then 90sec!!!
910 ce was 67sec
When will this GB start? Any links?
just wait for 910 CE Poly, maybe after alu CE shipped
I can only hope to fill in the efing form in less then 90sec!!!
I did it on mobile in 69sec and got in later when someone dropped out. You can do it, I believe in you!910 ce was 67sec
When will this GB start? Any links?
just wait for 910 CE Poly, maybe after alu CE shipped
I can only hope to fill in the efing form in less then 90sec!!!
I'll never own one I know it!
I did it on mobile in 69sec and got in later when someone dropped out. You can do it, I believe in you!910 ce was 67sec
When will this GB start? Any links?
just wait for 910 CE Poly, maybe after alu CE shipped
I can only hope to fill in the efing form in less then 90sec!!!
I'll never own one I know it!
For anyone who curious about 910 Poly, here's the album :p
https://flic.kr/s/aHskr7FWcf (https://flic.kr/s/aHskr7FWcf)
(https://farm5.staticflickr.com/4577/38228020332_a88158a8c0_h.jpg) (https://flic.kr/p/21f5AAQ)
DSCF7309 (https://flic.kr/p/21f5A1b) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on FlickrShow ImageDSCF7306 (https://flic.kr/p/Da9v31) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on FlickrShow ImageDSCF7305 (https://flic.kr/p/Zd5yL9) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on FlickrShow ImageDSCF7301 (https://flic.kr/p/21f5AAQ) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on FlickrShow ImageFor anyone who curious about 910 Poly, here's the album :p
https://flic.kr/s/aHskr7FWcf (https://flic.kr/s/aHskr7FWcf)
(https://farm5.staticflickr.com/4577/38228020332_a88158a8c0_h.jpg) (https://flic.kr/p/21f5AAQ)
(https://farm5.staticflickr.com/4527/37549024384_9544d7612e_h.jpg) (https://flic.kr/p/Zd5yL9)
(https://farm5.staticflickr.com/4528/24388707448_e465e5c892_h.jpg) (https://flic.kr/p/Da9v31)
(https://farm5.staticflickr.com/4571/38228018322_90ed32251e_h.jpg) (https://flic.kr/p/21f5A1b)
(https://farm5.staticflickr.com/4549/24388706768_9a2d31635a_h.jpg) (https://flic.kr/p/Da9uQh)DSCF7311 (https://flic.kr/p/Da9uQh) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on Flickr
DSCF7309 (https://flic.kr/p/21f5A1b) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on FlickrShow ImageDSCF7306 (https://flic.kr/p/Da9v31) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on FlickrShow ImageDSCF7305 (https://flic.kr/p/Zd5yL9) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on FlickrShow ImageDSCF7301 (https://flic.kr/p/21f5AAQ) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on FlickrShow ImageFor anyone who curious about 910 Poly, here's the album :p
https://flic.kr/s/aHskr7FWcf (https://flic.kr/s/aHskr7FWcf)
(https://farm5.staticflickr.com/4577/38228020332_a88158a8c0_h.jpg) (https://flic.kr/p/21f5AAQ)
(https://farm5.staticflickr.com/4527/37549024384_9544d7612e_h.jpg) (https://flic.kr/p/Zd5yL9)
(https://farm5.staticflickr.com/4528/24388707448_e465e5c892_h.jpg) (https://flic.kr/p/Da9v31)
(https://farm5.staticflickr.com/4571/38228018322_90ed32251e_h.jpg) (https://flic.kr/p/21f5A1b)
(https://farm5.staticflickr.com/4549/24388706768_9a2d31635a_h.jpg) (https://flic.kr/p/Da9uQh)DSCF7311 (https://flic.kr/p/Da9uQh) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on Flickr
Wow I've been dying for a poly board. How do you like it? Poly plate?
DSCF7309 (https://flic.kr/p/21f5A1b) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on FlickrShow ImageDSCF7306 (https://flic.kr/p/Da9v31) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on FlickrShow ImageDSCF7305 (https://flic.kr/p/Zd5yL9) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on FlickrShow ImageDSCF7301 (https://flic.kr/p/21f5AAQ) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on FlickrShow ImageFor anyone who curious about 910 Poly, here's the album :p
https://flic.kr/s/aHskr7FWcf (https://flic.kr/s/aHskr7FWcf)
(https://farm5.staticflickr.com/4577/38228020332_a88158a8c0_h.jpg) (https://flic.kr/p/21f5AAQ)
(https://farm5.staticflickr.com/4527/37549024384_9544d7612e_h.jpg) (https://flic.kr/p/Zd5yL9)
(https://farm5.staticflickr.com/4528/24388707448_e465e5c892_h.jpg) (https://flic.kr/p/Da9v31)
(https://farm5.staticflickr.com/4571/38228018322_90ed32251e_h.jpg) (https://flic.kr/p/21f5A1b)
(https://farm5.staticflickr.com/4549/24388706768_9a2d31635a_h.jpg) (https://flic.kr/p/Da9uQh)DSCF7311 (https://flic.kr/p/Da9uQh) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on Flickr
Wow I've been dying for a poly board. How do you like it? Poly plate?
Brass plate bro, haven’t assembled it yet hahaha
Just put the switch without solder
Photo purpose lol
DSCF7309 (https://flic.kr/p/21f5A1b) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on FlickrShow ImageDSCF7306 (https://flic.kr/p/Da9v31) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on FlickrShow ImageDSCF7305 (https://flic.kr/p/Zd5yL9) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on FlickrShow ImageDSCF7301 (https://flic.kr/p/21f5AAQ) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on FlickrShow ImageFor anyone who curious about 910 Poly, here's the album :p
https://flic.kr/s/aHskr7FWcf (https://flic.kr/s/aHskr7FWcf)
(https://farm5.staticflickr.com/4577/38228020332_a88158a8c0_h.jpg) (https://flic.kr/p/21f5AAQ)
(https://farm5.staticflickr.com/4527/37549024384_9544d7612e_h.jpg) (https://flic.kr/p/Zd5yL9)
(https://farm5.staticflickr.com/4528/24388707448_e465e5c892_h.jpg) (https://flic.kr/p/Da9v31)
(https://farm5.staticflickr.com/4571/38228018322_90ed32251e_h.jpg) (https://flic.kr/p/21f5A1b)
(https://farm5.staticflickr.com/4549/24388706768_9a2d31635a_h.jpg) (https://flic.kr/p/Da9uQh)DSCF7311 (https://flic.kr/p/Da9uQh) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on Flickr
Wow I've been dying for a poly board. How do you like it? Poly plate?
Brass plate bro, haven’t assembled it yet hahaha
Just put the switch without solder
Photo purpose lol
Ah, poly plate is a requirement! Looks great though, I must have one.
DSCF7309 (https://flic.kr/p/21f5A1b) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on FlickrShow ImageDSCF7306 (https://flic.kr/p/Da9v31) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on FlickrShow ImageDSCF7305 (https://flic.kr/p/Zd5yL9) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on FlickrShow ImageDSCF7301 (https://flic.kr/p/21f5AAQ) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on FlickrShow ImageFor anyone who curious about 910 Poly, here's the album :p
https://flic.kr/s/aHskr7FWcf (https://flic.kr/s/aHskr7FWcf)
(https://farm5.staticflickr.com/4577/38228020332_a88158a8c0_h.jpg) (https://flic.kr/p/21f5AAQ)
(https://farm5.staticflickr.com/4527/37549024384_9544d7612e_h.jpg) (https://flic.kr/p/Zd5yL9)
(https://farm5.staticflickr.com/4528/24388707448_e465e5c892_h.jpg) (https://flic.kr/p/Da9v31)
(https://farm5.staticflickr.com/4571/38228018322_90ed32251e_h.jpg) (https://flic.kr/p/21f5A1b)
(https://farm5.staticflickr.com/4549/24388706768_9a2d31635a_h.jpg) (https://flic.kr/p/Da9uQh)DSCF7311 (https://flic.kr/p/Da9uQh) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on Flickr
Wow I've been dying for a poly board. How do you like it? Poly plate?
Brass plate bro, haven’t assembled it yet hahaha
Just put the switch without solder
Photo purpose lol
Ah, poly plate is a requirement! Looks great though, I must have one.
I will use linear so i pick brass plate hahaha, but poly plate will great with clicky switch !
Sent from my iPhone using Tapatalk
Posting in threads asking about updates on other projects?
Wat
He hasn't posted in Tris for almost 2 months and people are still asking for updates etc...
I agree that people shouldn't have to post in other threads, but if that's what it takes then :shrug:
**Week 8 update**
It's not likely that the housings can be done by week 10, delivery will be postponed to week 12.Show Image(https://i.imgur.com/X98XLxL.jpg)
**Week 8 update**
It's not likely that the housings can be done by week 10, delivery will be postponed to week 12.Show Image(https://i.imgur.com/X98XLxL.jpg)
**Week 8 update**
It's not likely that the housings can be done by week 10, delivery will be postponed to week 12.Show Image(https://i.imgur.com/X98XLxL.jpg)
Err..... So..... Kinda posted it first at 910 thread. My bad, didn't notice that this is the actual CE. So yeah, spray painted 910 CE. Drool pls ladies and gentlemen. Your drools makes me happy.Show Image(https://uploads.tapatalk-cdn.com/20171127/3836fbce4be8e13a813c9c66cfc19aed.jpg)
Sent from my SM-G935F using Tapatalk
Very unlikely but anyone giving out their spots?
Err..... So..... Kinda posted it first at 910 thread. My bad, didn't notice that this is the actual CE. So yeah, spray painted 910 CE. Drool pls ladies and gentlemen. Your drools makes me happy.Show Image(https://uploads.tapatalk-cdn.com/20171127/3836fbce4be8e13a813c9c66cfc19aed.jpg)
Sent from my SM-G935F using Tapatalk
Very unlikely but anyone giving out their spots?
yutski generally doesn't allow slot transfers as far as i know
wait until these ship
I transferred mine a bit ago, and I know a couple others that have. It's only between friends generally :blank:
I transferred mine a bit ago, and I know a couple others that have. It's only between friends generally :blank:
:dolphin:
I transferred mine a bit ago, and I know a couple others that have. It's only between friends generally :blank:
:dolphin:
:dolphinforretail:
Yup yup. Kinda. By Sam's recommendation since he knows a guy. I think he is going to make a few extras with either this painting or powder coating. Just to be different. So like special unit you see.Err..... So..... Kinda posted it first at 910 thread. My bad, didn't notice that this is the actual CE. So yeah, spray painted 910 CE. Drool pls ladies and gentlemen. Your drools makes me happy.Show Image(https://uploads.tapatalk-cdn.com/20171127/3836fbce4be8e13a813c9c66cfc19aed.jpg)
Sent from my SM-G935F using Tapatalk
did you do it yourself?
The ano looks super nice, thanks for sharing those pictures.it really is, so smooth and clean. if youre expecting a CE, youll definitely love it :thumb:
I wish I was. I‘d love to get my hands on one though.The ano looks super nice, thanks for sharing those pictures.it really is, so smooth and clean. if youre expecting a CE, youll definitely love it :thumb:
my first custom... Yey!Show Image(https://i.imgur.com/XT7EAME.jpg)Show Image(https://i.imgur.com/RpW5mWu.jpg)Show Image(https://i.imgur.com/aYPsyIi.jpg)Show Image(https://i.imgur.com/rMIYen4.jpg)Show Image(https://i.imgur.com/ZCpQrN1.jpg)
my first custom... Yey!Amazing shots and pure perfection of a keyboard.Show Image(https://i.imgur.com/XT7EAME.jpg)Show Image(https://i.imgur.com/RpW5mWu.jpg)Show Image(https://i.imgur.com/aYPsyIi.jpg)Show Image(https://i.imgur.com/rMIYen4.jpg)Show Image(https://i.imgur.com/ZCpQrN1.jpg)
I wish I was. I‘d love to get my hands on one though.The ano looks super nice, thanks for sharing those pictures.it really is, so smooth and clean. if youre expecting a CE, youll definitely love it :thumb:
my first custom... Yey!Show Image(https://i.imgur.com/XT7EAME.jpg)Show Image(https://i.imgur.com/RpW5mWu.jpg)Show Image(https://i.imgur.com/aYPsyIi.jpg)Show Image(https://i.imgur.com/rMIYen4.jpg)Show Image(https://i.imgur.com/ZCpQrN1.jpg)
my first custom... Yey!Show Image(https://i.imgur.com/XT7EAME.jpg)Show Image(https://i.imgur.com/RpW5mWu.jpg)Show Image(https://i.imgur.com/aYPsyIi.jpg)Show Image(https://i.imgur.com/rMIYen4.jpg)Show Image(https://i.imgur.com/ZCpQrN1.jpg)
Do you have a source for that? That‘d be awesome.I wish I was. I‘d love to get my hands on one though.The ano looks super nice, thanks for sharing those pictures.it really is, so smooth and clean. if youre expecting a CE, youll definitely love it :thumb:
I'm just hoping I can get a polycarb one. i think i saw they are even gonna make the pcb translucent :O.
Here you go.Do you have a source for that? That‘d be awesome.I wish I was. I‘d love to get my hands on one though.The ano looks super nice, thanks for sharing those pictures.it really is, so smooth and clean. if youre expecting a CE, youll definitely love it :thumb:
I'm just hoping I can get a polycarb one. i think i saw they are even gonna make the pcb translucent :O.
Here you go.Do you have a source for that? That‘d be awesome.I wish I was. I‘d love to get my hands on one though.The ano looks super nice, thanks for sharing those pictures.it really is, so smooth and clean. if youre expecting a CE, youll definitely love it :thumb:
I'm just hoping I can get a polycarb one. i think i saw they are even gonna make the pcb translucent :O.
https://www.instagram.com/p/BbMfU1pFmKT/
Any updates by chance?
Weeks 14 update
Happy new year guys. The machining for the all the parts is completed. Aluminum parts are being anodized at this moment. I was informed that I may collect the anodized parts next week.
I‘d really love to see more of the translucent PCB with that polycarbonate case. Could you give us an update on that, yuktsi?I have a small GB on that in progress for some friends. Send me a PM if you are interested.
A small GB for the polycarb 910? How many spots do you expect to have?I‘d really love to see more of the translucent PCB with that polycarbonate case. Could you give us an update on that, yuktsi?I have a small GB on that in progress for some friends. Send me a PM if you are interested.
A small GB for the polycarb 910? How many spots do you expect to have?I‘d really love to see more of the translucent PCB with that polycarbonate case. Could you give us an update on that, yuktsi?I have a small GB on that in progress for some friends. Send me a PM if you are interested.
PM'd about it.
Any extras?
Any extras?
ur mam has extras.
I‘d really love to see more of the translucent PCB with that polycarbonate case. Could you give us an update on that, yuktsi?I have a small GB on that in progress for some friends. Send me a PM if you are interested.
I‘d really love to see more of the translucent PCB with that polycarbonate case. Could you give us an update on that, yuktsi?I have a small GB on that in progress for some friends. Send me a PM if you are interested.
I‘d really love to see more of the translucent PCB with that polycarbonate case. Could you give us an update on that, yuktsi?I have a small GB on that in progress for some friends. Send me a PM if you are interested.
Guess I'm not a friend. :'(
Show Image(https://i.imgur.com/93n3FJK.jpg)
Daaaaamn nice, whats the middle color?Show Image(https://i.imgur.com/93n3FJK.jpg)
So excited! :)Show Image(https://i.imgur.com/93n3FJK.jpg)
Daaaaamn nice, whats the middle color?
still wish I coulda got it in purple but happy I'm getting one at all.
Show Image(https://i.imgur.com/93n3FJK.jpg)
Show Image(https://i.imgur.com/93n3FJK.jpg)
That crimson red looks too incredible. I’m jealous of you all!
Show Image(https://i.imgur.com/93n3FJK.jpg)
That crimson red looks too incredible. I’m jealous of you all!
Dw it wasn't an option for normal orders. Probably close-ish friends only again :/
Show Image(https://i.imgur.com/93n3FJK.jpg)
That crimson red looks too incredible. I’m jealous of you all!
Dw it wasn't an option for normal orders. Probably close-ish friends only again :/
Show Image(https://i.imgur.com/93n3FJK.jpg)
That crimson red looks too incredible. I’m jealous of you all!
Dw it wasn't an option for normal orders. Probably close-ish friends only again :/
Don‘t worryShow Image(https://i.imgur.com/93n3FJK.jpg)
That crimson red looks too incredible. I’m jealous of you all!
Dw it wasn't an option for normal orders. Probably close-ish friends only again :/
What’s DW stand for ?
Sent from my iPhone using Tapatalk
Anodising is good except for the grey ones, which turn out a lot lighter than what I expected.
**Week 17 update**
Everything seems fine, no dents or any scratches. Anodising is good except for the grey ones, which turn out a lot lighter than what I expected.
**Week 17 update**Thanks for the update. I'm in Australia so I'm always expecting super high shipping anyway so whats a few more dollars.
All the parts are with me already, it's slower than what I promised, but things are going a lot faster and smoother this time. CNC finished in around 10 weeks times, and it only takes 3 weeks for the anodising.Went through about 1/3 of the parts last night. Everything seems fine, no dents or any scratches. Anodising is good except for the grey ones, which turn out a lot lighter than what I expected. And all kits will be shipped with the Unicorn 1.2 PCB that I designed instead of ver 1.1. I should be able to have everything shipped before the lunar new year.
This is difficult but it has to say, unfortunately. The exchange rate of USD against Ringgit Malaysia has dropped from 4.3 to 3.8, that was something that I neglected largely when I working on my costing. There are some increase in cost that I decided later such as I should opt for CNC milling for the brass plate instead of conventional laser cutting. Also some addtional cost per unit for the anodizing to speed up the process.
Ultimately, I am very sorry for these unseen circumstances. I would add another 45$ in shipping invoices. I understand that it's unfair to increase the price now, if you are having second thoughts, please send me a PM. Breaking even is something I'd be happy to achieve, not even considering profits at the moment.
Again, very sorry and much appreciated for your kind understanding.
Don‘t worryShow Image(https://i.imgur.com/93n3FJK.jpg)
That crimson red looks too incredible. I’m jealous of you all!
Dw it wasn't an option for normal orders. Probably close-ish friends only again :/
What’s DW stand for ?
Sent from my iPhone using Tapatalk
**Week 17 update**
All the parts are with me already, it's slower than what I promised, but things are going a lot faster and smoother this time. CNC finished in around 10 weeks times, and it only takes 3 weeks for the anodising.Went through about 1/3 of the parts last night. Everything seems fine, no dents or any scratches. Anodising is good except for the grey ones, which turn out a lot lighter than what I expected. And all kits will be shipped with the Unicorn 1.2 PCB that I designed instead of ver 1.1. I should be able to have everything shipped before the lunar new year.
This is difficult but it has to say, unfortunately. The exchange rate of USD against Ringgit Malaysia has dropped from 4.3 to 3.8, that was something that I neglected largely when I working on my costing. There are some increase in cost that I decided later such as I should opt for CNC milling for the brass plate instead of conventional laser cutting. Also some addtional cost per unit for the anodizing to speed up the process.
Ultimately, I am very sorry for these unseen circumstances. I would add another 45$ in shipping invoices. I understand that it's unfair to increase the price now, if you are having second thoughts, please send me a PM. Breaking even is something I'd be happy to achieve, not even considering profits at the moment.
Again, very sorry and much appreciated for your kind understanding.
This is difficult but it has to say, unfortunately. The exchange rate of USD against Ringgit Malaysia has dropped from 4.3 to 3.8, that was something that I neglected largely when I working on my costing. There are some increase in cost that I decided later such as I should opt for CNC milling for the brass plate instead of conventional laser cutting. Also some addtional cost per unit for the anodizing to speed up the process.
Ultimately, I am very sorry for these unseen circumstances. I would add another 45$ in shipping invoices. I understand that it's unfair to increase the price now, if you are having second thoughts, please send me a PM. Breaking even is something I'd be happy to achieve, not even considering profits at the moment.
Again, very sorry and much appreciated for your kind understanding.
**Week 17 update**
All the parts are with me already, it's slower than what I promised, but things are going a lot faster and smoother this time. CNC finished in around 10 weeks times, and it only takes 3 weeks for the anodising.Went through about 1/3 of the parts last night. Everything seems fine, no dents or any scratches. Anodising is good except for the grey ones, which turn out a lot lighter than what I expected. And all kits will be shipped with the Unicorn 1.2 PCB that I designed instead of ver 1.1. I should be able to have everything shipped before the lunar new year.
This is difficult but it has to say, unfortunately. The exchange rate of USD against Ringgit Malaysia has dropped from 4.3 to 3.8, that was something that I neglected largely when I working on my costing. There are some increase in cost that I decided later such as I should opt for CNC milling for the brass plate instead of conventional laser cutting. Also some addtional cost per unit for the anodizing to speed up the process.
Ultimately, I am very sorry for these unseen circumstances. I would add another 45$ in shipping invoices. I understand that it's unfair to increase the price now, if you are having second thoughts, please send me a PM. Breaking even is something I'd be happy to achieve, not even considering profits at the moment.
Again, very sorry and much appreciated for your kind understanding.
**Week 17 update**
All the parts are with me already, it's slower than what I promised, but things are going a lot faster and smoother this time. CNC finished in around 10 weeks times, and it only takes 3 weeks for the anodising.Went through about 1/3 of the parts last night. Everything seems fine, no dents or any scratches. Anodising is good except for the grey ones, which turn out a lot lighter than what I expected. And all kits will be shipped with the Unicorn 1.2 PCB that I designed instead of ver 1.1. I should be able to have everything shipped before the lunar new year.
This is difficult but it has to say, unfortunately. The exchange rate of USD against Ringgit Malaysia has dropped from 4.3 to 3.8, that was something that I neglected largely when I working on my costing. There are some increase in cost that I decided later such as I should opt for CNC milling for the brass plate instead of conventional laser cutting. Also some addtional cost per unit for the anodizing to speed up the process.
Ultimately, I am very sorry for these unseen circumstances. I would add another 45$ in shipping invoices. I understand that it's unfair to increase the price now, if you are having second thoughts, please send me a PM. Breaking even is something I'd be happy to achieve, not even considering profits at the moment.
Again, very sorry and much appreciated for your kind understanding.
No worries about the price increase, **** happens. Out of curiosity, what made you decide to get the brass plates milled rather than laser cut?
**Week 17 update**
All the parts are with me already, it's slower than what I promised, but things are going a lot faster and smoother this time. CNC finished in around 10 weeks times, and it only takes 3 weeks for the anodising.Went through about 1/3 of the parts last night. Everything seems fine, no dents or any scratches. Anodising is good except for the grey ones, which turn out a lot lighter than what I expected. And all kits will be shipped with the Unicorn 1.2 PCB that I designed instead of ver 1.1. I should be able to have everything shipped before the lunar new year.
This is difficult but it has to say, unfortunately. The exchange rate of USD against Ringgit Malaysia has dropped from 4.3 to 3.8, that was something that I neglected largely when I working on my costing. There are some increase in cost that I decided later such as I should opt for CNC milling for the brass plate instead of conventional laser cutting. Also some addtional cost per unit for the anodizing to speed up the process.
Ultimately, I am very sorry for these unseen circumstances. I would add another 45$ in shipping invoices. I understand that it's unfair to increase the price now, if you are having second thoughts, please send me a PM. Breaking even is something I'd be happy to achieve, not even considering profits at the moment.
Again, very sorry and much appreciated for your kind understanding.
No worries about the price increase, **** happens. Out of curiosity, what made you decide to get the brass plates milled rather than laser cut?
Milling plates give cleaner cuts and you avoid the possibility of laser burn marks. Theres quite a noticeable difference.
**Week 17 update**
Everything seems fine, no dents or any scratches.
How does this grey shade compare to the grey shade of the TRIS numpad? :xIt's actually lighter than the Tris grey, I will see what I can do with your units.
Other than that paying more is fine with me
Original plan was to use Dolch with grey case. Am going to use GMK Originative instead since grey turned out a bit lighter. It will also be my first Zilent keyboard. Let us pray it ships before Lunar New Year or face the wait.
Invoices are going are out. US orders are shipping out in the next few days. I will take more photos of each color as I pack tmr. Cheers.Great to hear! Im extremely excited. :D
Me too! I have about 1/3 more to check, hope not dents like the last round.Invoices are going are out. US orders are shipping out in the next few days. I will take more photos of each color as I pack tmr. Cheers.Great to hear! Im extremely excited. :D
Fingers crossed. 🤞🏻Me too! I have about 1/3 more to check, hope not dents like the last round.Invoices are going are out. US orders are shipping out in the next few days. I will take more photos of each color as I pack tmr. Cheers.Great to hear! Im extremely excited. :D
Invoices are going are out. US orders are shipping out in the next few days. I will take more photos of each color as I pack tmr.Ayy awesome
Thank you guys for understanding the increase in cost. Cheers.
Invoices are going are out. US orders are shipping out in the next few days. I will take more photos of each color as I pack tmr.
Thank you guys for understanding the increase in cost. Cheers.
I haven't either, hes probably just not finished yet.Invoices are going are out. US orders are shipping out in the next few days. I will take more photos of each color as I pack tmr.
Thank you guys for understanding the increase in cost. Cheers.
I havent gotten an invoice for the additional charges. Have they gone out?
I don't think any have gone out, probs gonna finish checking the boards like he said.I haven't either, hes probably just not finished yet.Invoices are going are out. US orders are shipping out in the next few days. I will take more photos of each color as I pack tmr.
Thank you guys for understanding the increase in cost. Cheers.
I havent gotten an invoice for the additional charges. Have they gone out?
I really like the lighter Grey, it looks good with the brass plate.It's actually much closer to the color of titanium, which is something that I've been wanting to do since the R1 Jane.
Titanium is a colour I like and if True I'm super excited to see in person when I get mine.I really like the lighter Grey, it looks good with the brass plate.It's actually much closer to the color of titanium, which is something that I've been wanting to do since the R1 Jane.
I really like the lighter Grey, it looks good with the brass plate.It's actually much closer to the color of titanium, which is something that I've been wanting to do since the R1 Jane.
I really like the lighter Grey, it looks good with the brass plate.
Show Image(https://i.imgur.com/Jw4fASAh.jpg)
The color is pretty close to the titanium clip on my pen.
Show Image(https://i.imgur.com/Jw4fASAh.jpg)
The color is pretty close to the titanium clip on my pen.
Thats silver tho right? Not the grey one?Show Image(https://i.imgur.com/Jw4fASAh.jpg)
The color is pretty close to the titanium clip on my pen.
Thats silver tho right? Not the grey one?Show Image(https://i.imgur.com/Jw4fASAh.jpg)
The color is pretty close to the titanium clip on my pen.
Thats silver tho right? Not the grey one?Show Image(https://i.imgur.com/Jw4fASAh.jpg)
The color is pretty close to the titanium clip on my pen.
There was no silver option. This is the grey one that was stated came out looking like titanium. Thus, comparison to titanium pen.
Thats silver tho right? Not the grey one?Show Image(https://i.imgur.com/Jw4fASAh.jpg)
The color is pretty close to the titanium clip on my pen.
There was no silver option. This is the grey one that was stated came out looking like titanium. Thus, comparison to titanium pen.
There is no silver option but i believe someone will have it
Sent from my iPhone using Tapatalk
Show Image(https://i.imgur.com/Jw4fASAh.jpg)
The color is pretty close to the titanium clip on my pen.
Show Image(https://i.imgur.com/Jw4fASAh.jpg)
The color is pretty close to the titanium clip on my pen.
Show Image(https://i.imgur.com/Jw4fASAh.jpg)
The color is pretty close to the titanium clip on my pen.
Show Image(https://i.imgur.com/Jw4fASAh.jpg)
The color is pretty close to the titanium clip on my pen.
Any news on SEA orders? Haven't gotten an invoice.
I thought SEA will be last shipment since it’s nearest and fast to deliver
Sent from my iPhone using Tapatalk
I thought SEA will be last shipment since it’s nearest and fast to deliver
Sent from my iPhone using Tapatalk
That makes sense but I'm just asking for an update with CNY coming up. He mentioned via PM that he'll try to ship everything out by CNY.
I thought SEA will be last shipment since it’s nearest and fast to deliver
Sent from my iPhone using Tapatalk
That makes sense but I'm just asking for an update with CNY coming up. He mentioned via PM that he'll try to ship everything out by CNY.
May i know which nation are you ?
Sent from my iPhone using Tapatalk
I'm Australian so I guess I am lumped in with all you guys lol.
I'm Australian so I guess I am lumped in with all you guys lol.
put another shrimp on the barbie
Pink is more than just a color lolShow Image(https://uploads.tapatalk-cdn.com/20180213/f201a124f30f4ca40bdedf71539bffaa.jpg)
Sent from my iPhone using Tapatalk
Pink is more than just a color lolShow Image(https://uploads.tapatalk-cdn.com/20180213/f201a124f30f4ca40bdedf71539bffaa.jpg)
Sent from my iPhone using Tapatalk
Pink is more than just a color lolShow Image(https://uploads.tapatalk-cdn.com/20180213/f201a124f30f4ca40bdedf71539bffaa.jpg)
Sent from my iPhone using Tapatalk
Pink is more than just a color lolShow Image(https://uploads.tapatalk-cdn.com/20180213/f201a124f30f4ca40bdedf71539bffaa.jpg)
Sent from my iPhone using Tapatalk
Pink is more than just a color lolShow Image(https://uploads.tapatalk-cdn.com/20180213/f201a124f30f4ca40bdedf71539bffaa.jpg)
Sent from my iPhone using Tapatalk
Rapha makes the best kit :thumb:
Pink is more than just a color lolShow Image(https://uploads.tapatalk-cdn.com/20180213/f201a124f30f4ca40bdedf71539bffaa.jpg)
Sent from my iPhone using Tapatalk
Hi guys, I've managed to have around 50% of the orders shipped yesterday. Tracking has been updated to PayPal. I will be away for the next few days and will continue to ship on the 19th or 20th. Should have another 25% of the orders shipped by next week. There're around 10+ boards that need to be re-anodized. There are no dents, so it won't take too long for the rework.
Happy Lunar New Year to those celebrating :p
I've actually put your unit aside. For some reason, I thought you are in the "need to ship you more than 1 board" bunch, will have yours sorted by next week.Hi guys, I've managed to have around 50% of the orders shipped yesterday. Tracking has been updated to PayPal. I will be away for the next few days and will continue to ship on the 19th or 20th. Should have another 25% of the orders shipped by next week. There're around 10+ boards that need to be re-anodized. There are no dents, so it won't take too long for the rework.
Happy Lunar New Year to those celebrating :p
Well, shoot. Hoping I'm not in the "needs re-ano" bunch, but am also very happy the issues are not dent/scratch related. A happy Lunar New Year to you sir.
Is there a list of names from this GB that their units needs to be fixed? I hope mine isn't part of that "re-ano" bunch too.
Is there a list of names from this GB that their units needs to be fixed? I hope mine isn't part of that "re-ano" bunch too.That's actually a good idea. Thank you. I will probably have a list made when I have the rest shipped out.
I don't think that is this possible. These 'defected' ones are just either the top or bottom. I am sending both top and bottom back so that they produce a closer color match.Is there a list of names from this GB that their units needs to be fixed? I hope mine isn't part of that "re-ano" bunch too.
Seconded, though knowing my luck I'm probably part of that group.
This is a long shot, but if I am, is there a chance I can ask for a color change if it's reano'd anyways?
Rapha makes the best kit :thumb:Expensive though :(
They have a small shop in SF that's always fun to visit. There's always something interesting on display and the coffee is pretty good.I wish we have a Rapha clubhouse here in Kuala Lumpur. And yes, that will be the plate for the poly.
Is that the same plate that will ship with the poly 910?
Surprised, u reply so quickly especially after the reunion dinner :)Haha a little bored with the relatives around.
Sent from my Pixel using Tapatalk
I don't think that is this possible. These 'defected' ones are just either the top or bottom. I am sending both top and bottom back so that they produce a closer color match.
hey yuktsi, how do I use the tracking number listed on paypal? didn't work with track-trace or any shippers I could think of and google was no help.Also having this issue ha
thanks
hey yuktsi, how do I use the tracking number listed on paypal? didn't work with track-trace or any shippers I could think of and google was no help.Also having this issue ha
thanks
hey yuktsi, how do I use the tracking number listed on paypal? didn't work with track-trace or any shippers I could think of and google was no help.
thanks
hey yuktsi, how do I use the tracking number listed on paypal? didn't work with track-trace or any shippers I could think of and google was no help.
thanks
try putting it into 17track
Yuktsi, I'm still waiting a reply from you on my PM.Sorry, I must have missed yours. Replied btw.
All US orders were shipped using S.F. Express. I just only got home from my parents' hometown, another round of shipping invoices will be going out tmr.
Cheers.
Oof that light grey (titanium) will be hot with a beige set. Another GB I missed it seems :o
Sent from my iPhone using Tapatalk
Oof that light grey (titanium) will be hot with a beige set. Another GB I missed it seems :o
Sent from my iPhone using Tapatalk
Thats whats going on mine ;)
Has anyone been able to track their order? My tracking number still does not work, even when I try it through SF express.
Has anyone been able to track their order? My tracking number still does not work, even when I try it through SF express.
Late night invoice paid 👌Thank you! Another round of shipping invoices was sent, btw.
$150 AUD shipping wont keep me from this keyboard.
Picked up some Zilents for this thing, am aching to get my hands on it. What was the difference in PCB versions? Unicorn 1.1 vs. 1.2 or something?
Is there a list available yet to see which boards have to undergo re-anodizing?I don't have the list yet. But I can confirm that yours will be shipped in a few more days.
Picked up some Zilents for this thing, am aching to get my hands on it. What was the difference in PCB versions? Unicorn 1.1 vs. 1.2 or something?For 1.2, I removed the ground plane and wire the grounds instead, so you can kinda see through the PCB.
Best answer ever, thank you so much, Im hella excited. :DIs there a list available yet to see which boards have to undergo re-anodizing?I don't have the list yet. But I can confirm that yours will be shipped in a few more days.
Yeah, the shipping for yours ended up way higher than the amount that I collected. Gonna need to check with another courier like Fedex.Best answer ever, thank you so much, Im hella excited. :DIs there a list available yet to see which boards have to undergo re-anodizing?I don't have the list yet. But I can confirm that yours will be shipped in a few more days.
Tracking still isn't updating for me :(
Tracking still isn't updating for me :(http://www.sf-express.com/
Tracking still isn't updating for me :(http://www.sf-express.com/
Try to trace it here. It's working for me.
Anybody get theirs yet? Want pics pls
Anybody get theirs yet? Want pics plsThis week I hope, I still gotta do all my switches yet.
Yeah I am curious what switch are other putting on theirAnybody get theirs yet? Want pics plsThis week I hope, I still gotta do all my switches yet.
So what is everyone putting in theirs?
Going with 62g vintage blacks. They're all tuned and ready to go.Yeah I am curious what switch are other putting on theirAnybody get theirs yet? Want pics plsThis week I hope, I still gotta do all my switches yet.
So what is everyone putting in theirs?
Sent from my Pixel using Tapatalk
I hope I will get my invoice soon...
Hey Yuktsi, was mine shipped as well? In the US but the invoice hasn't been updated with tracking.Sorry. Just PMed you with the tracking. It seems like your board has landed in the US and in transit to the destination.
my tracking is working (080023453773) but it says destination Raleigh and i live in Pittsburgh. Hopefully I just got someone else’s tracking? I’ll find out soon but just wanted to give a heads upSorry, just PMed you the correct one.
Hey Yuktsi, was mine shipped as well? In the US but the invoice hasn't been updated with tracking.Sorry. Just PMed you with the tracking. It seems like your board has landed in the US and in transit to the destination.
got mine just now. packaging was perfect. thanks again yuktsi! took some quick pics:Show Image(https://i.imgur.com/RP9VmJ6.jpg)Show Image(https://i.imgur.com/aXL2So1.jpg)Show Image(https://i.imgur.com/JLkS5vP.jpg)Show Image(https://i.imgur.com/BkXLXfH.jpg)Show Image(https://i.imgur.com/1LByZGP.jpg)Show Image(https://i.imgur.com/FnB2JZs.jpg)
these are all greys for comparison:Show Image(https://i.imgur.com/mGpq4by.jpg)
vs X60 (wedge brothers):Show Image(https://i.imgur.com/P5wRIOi.jpg)Show Image(https://i.imgur.com/vn1kHEv.jpg)Show Image(https://i.imgur.com/qGaZKrp.jpg)
got mine just now. packaging was perfect. thanks again yuktsi! took some quick pics:Show Image(https://i.imgur.com/RP9VmJ6.jpg)Show Image(https://i.imgur.com/aXL2So1.jpg)Show Image(https://i.imgur.com/JLkS5vP.jpg)Show Image(https://i.imgur.com/BkXLXfH.jpg)Show Image(https://i.imgur.com/1LByZGP.jpg)Show Image(https://i.imgur.com/FnB2JZs.jpg)
these are all greys for comparison:Show Image(https://i.imgur.com/mGpq4by.jpg)
vs X60 (wedge brothers):Show Image(https://i.imgur.com/P5wRIOi.jpg)Show Image(https://i.imgur.com/vn1kHEv.jpg)Show Image(https://i.imgur.com/qGaZKrp.jpg)
looks amazing
got mine just now. packaging was perfect. thanks again yuktsi! took some quick pics:Show Image(https://i.imgur.com/RP9VmJ6.jpg)Show Image(https://i.imgur.com/aXL2So1.jpg)Show Image(https://i.imgur.com/JLkS5vP.jpg)Show Image(https://i.imgur.com/BkXLXfH.jpg)Show Image(https://i.imgur.com/1LByZGP.jpg)Show Image(https://i.imgur.com/FnB2JZs.jpg)
these are all greys for comparison:Show Image(https://i.imgur.com/mGpq4by.jpg)
vs X60 (wedge brothers):Show Image(https://i.imgur.com/P5wRIOi.jpg)Show Image(https://i.imgur.com/vn1kHEv.jpg)Show Image(https://i.imgur.com/qGaZKrp.jpg)
Finally...!!!Show Image(https://i.imgur.com/eDoqn2Q.jpg)Show Image(https://i.imgur.com/nfVlMaF.jpg)Show Image(https://i.imgur.com/upbfCae.jpg)Show Image(https://i.imgur.com/DT7y3WR.jpg)Show Image(https://i.imgur.com/mgUwpab.jpg)
Got my pink in. Will post some pictures tomorrow when I have lighting. Ano and case were near perfect for me.Hope everything is good. I will log in more often during this period of time. If you guys have any issue, please don't hesitate to PM me here on GH. My email is yuktsi@gmail.com in case you don't have a GH account.
Received my grey. The bead blasting is like nothing I've ever seen before. Pictures can't possibly do it justice.Those wonderful words and no pictures?!
Thinking of putting in gateron yellow bottoms & springs, vintage blacks top & stem.
The color has a copper feel to it, perfect match for my new GMK 9009.
The PCB looks amazing, tested random keys and all good. Would be nice if someone else finds a way to flash qmk to it :)
A few issues but nothing major. The brass insert under 910 rattles a bit, gotta look into securing it. Some anodizing errors in between gap of top and bottom, can't see it from outside of course.
Overall this is probably the best keyboard out there and I'm very happy to own one. Thanks Yuktsi.
Sent from my SM-G950U using Tapatalk
Received my grey. The bead blasting is like nothing I've ever seen before. Pictures can't possibly do it justice.Those wonderful words and no pictures?!
Thinking of putting in gateron yellow bottoms & springs, vintage blacks top & stem.
The color has a copper feel to it, perfect match for my new GMK 9009.
The PCB looks amazing, tested random keys and all good. Would be nice if someone else finds a way to flash qmk to it :)
A few issues but nothing major. The brass insert under 910 rattles a bit, gotta look into securing it. Some anodizing errors in between gap of top and bottom, can't see it from outside of course.
Overall this is probably the best keyboard out there and I'm very happy to own one. Thanks Yuktsi.
Sent from my SM-G950U using Tapatalk
You’re killing me here. ;)
Soon tmReceived my grey. The bead blasting is like nothing I've ever seen before. Pictures can't possibly do it justice.Those wonderful words and no pictures?!
Thinking of putting in gateron yellow bottoms & springs, vintage blacks top & stem.
The color has a copper feel to it, perfect match for my new GMK 9009.
The PCB looks amazing, tested random keys and all good. Would be nice if someone else finds a way to flash qmk to it :)
A few issues but nothing major. The brass insert under 910 rattles a bit, gotta look into securing it. Some anodizing errors in between gap of top and bottom, can't see it from outside of course.
Overall this is probably the best keyboard out there and I'm very happy to own one. Thanks Yuktsi.
Sent from my SM-G950U using Tapatalk
You’re killing me here. ;)
same bro, for now picture > words :)
Received my grey. The bead blasting is like nothing I've ever seen before. Pictures can't possibly do it justice.You may put a tape under the brass insert. Or a thin foam. Do send me a PM if you are not happy with anything.
Thinking of putting in gateron yellow bottoms & springs, vintage blacks top & stem.
The color has a copper feel to it, perfect match for my new GMK 9009.
The PCB looks amazing, tested random keys and all good. Would be nice if someone else finds a way to flash qmk to it :)
A few issues but nothing major. The brass insert under 910 rattles a bit, gotta look into securing it. Some anodizing errors in between gap of top and bottom, can't see it from outside of course.
Overall this is probably the best keyboard out there and I'm very happy to own one. Thanks Yuktsi.
Sent from my SM-G950U using Tapatalk
Sent you a pm about missing tracking.Got my pink in. Will post some pictures tomorrow when I have lighting. Ano and case were near perfect for me.Hope everything is good. I will log in more often during this period of time. If you guys have any issue, please don't hesitate to PM me here on GH. My email is yuktsi@gmail.com in case you don't have a GH account.
The Unicorn PCB is the first PCB that I designed all by myself, would like to hear more about it from you guys.
Cheers.
Just replied to you with the tracking. Do let me know if you still haven't received the board.Sent you a pm about missing tracking.Got my pink in. Will post some pictures tomorrow when I have lighting. Ano and case were near perfect for me.Hope everything is good. I will log in more often during this period of time. If you guys have any issue, please don't hesitate to PM me here on GH. My email is yuktsi@gmail.com in case you don't have a GH account.
The Unicorn PCB is the first PCB that I designed all by myself, would like to hear more about it from you guys.
Cheers.
Picked my black case up from the post office. No dents in the case and the ano is flawless. It's so black I can see my soul's reflection in it. Crap weather today so I can't get any good shots to share, sadly.
There's a couple of scratches on the edge of some of the switch cutouts on the plate. There's also this one spot where it looks like something dripped onto the plate and dried, something like glue when it dries and you get a smooth bump. But these aren't noticeable when it's assembled, so overall it's pretty much perfect.
Well done Yuktsi.
Picked my black case up from the post office. No dents in the case and the ano is flawless. It's so black I can see my soul's reflection in it. Crap weather today so I can't get any good shots to share, sadly.Thank you. The plate was coated with a layer of something to protect it from oxidation, there goes the glue-like substance. Should be able to sand it off with a higher grade sandpaper. The weight was applied to same coating as well.
There's a couple of scratches on the edge of some of the switch cutouts on the plate. There's also this one spot where it looks like something dripped onto the plate and dried, something like glue when it dries and you get a smooth bump. But these aren't noticeable when it's assembled, so overall it's pretty much perfect.
Well done Yuktsi.
Picked my black case up from the post office. No dents in the case and the ano is flawless. It's so black I can see my soul's reflection in it. Crap weather today so I can't get any good shots to share, sadly.Thank you. The plate was coated with a layer of something to protect it from oxidation, there goes the glue-like substance. Should be able to sand it off with a higher grade sandpaper. The weight was applied to same coating as well.
There's a couple of scratches on the edge of some of the switch cutouts on the plate. There's also this one spot where it looks like something dripped onto the plate and dried, something like glue when it dries and you get a smooth bump. But these aren't noticeable when it's assembled, so overall it's pretty much perfect.
Well done Yuktsi.
I've sweaty palms and am quite bothered by the oxidised brass weight on my other boards. This seems to be a better option for me than nickel plating it.
Picked my black case up from the post office. No dents in the case and the ano is flawless. It's so black I can see my soul's reflection in it. Crap weather today so I can't get any good shots to share, sadly.Thank you. The plate was coated with a layer of something to protect it from oxidation, there goes the glue-like substance. Should be able to sand it off with a higher grade sandpaper. The weight was applied to same coating as well.
There's a couple of scratches on the edge of some of the switch cutouts on the plate. There's also this one spot where it looks like something dripped onto the plate and dried, something like glue when it dries and you get a smooth bump. But these aren't noticeable when it's assembled, so overall it's pretty much perfect.
Well done Yuktsi.
I've sweaty palms and am quite bothered by the oxidised brass weight on my other boards. This seems to be a better option for me than nickel plating it.
agree
been fun to watch my mira weight tarnish over the last month or so though
Picked my black case up from the post office. No dents in the case and the ano is flawless. It's so black I can see my soul's reflection in it. Crap weather today so I can't get any good shots to share, sadly.Thank you. The plate was coated with a layer of something to protect it from oxidation, there goes the glue-like substance. Should be able to sand it off with a higher grade sandpaper. The weight was applied to same coating as well.
There's a couple of scratches on the edge of some of the switch cutouts on the plate. There's also this one spot where it looks like something dripped onto the plate and dried, something like glue when it dries and you get a smooth bump. But these aren't noticeable when it's assembled, so overall it's pretty much perfect.
Well done Yuktsi.
I've sweaty palms and am quite bothered by the oxidised brass weight on my other boards. This seems to be a better option for me than nickel plating it.
agree
been fun to watch my mira weight tarnish over the last month or so though
Tarnishing is super nice as long as it's 100% on it's own and not by fingerprints, otherwise it looks awful :'(
heres my new bb...Show Image(https://farm5.staticflickr.com/4617/40516405582_c95f1d3ab2_k.jpg)
thanks for a smooth buy yuktsi, cant wait for the next one.
heres my new bb...Show Image(https://farm5.staticflickr.com/4617/40516405582_c95f1d3ab2_k.jpg)
thanks for a smooth buy yuktsi, cant wait for the next one.
heres my new bb...Show Image(https://farm5.staticflickr.com/4617/40516405582_c95f1d3ab2_k.jpg)
thanks for a smooth buy yuktsi, cant wait for the next one.
Plain side profiles are underrated.
Did yuktsi ever explain why the top right key is a blocker?
Waiting is over, please welcome Silver baby
(https://farm5.staticflickr.com/4786/40529044612_69d1116674_b.jpg) (https://flic.kr/p/24KpWXf)
Great shots!TGR 910 CE (https://flic.kr/p/224doaY) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on FlickrShow ImageTGR 910 CE (https://flic.kr/p/224dob9) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on FlickrShow ImageTGR 910 CE (https://flic.kr/p/24KpWXf) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on FlickrShow ImageWaiting is over, please welcome Silver baby
(https://farm5.staticflickr.com/4786/40529044612_69d1116674_b.jpg) (https://flic.kr/p/24KpWXf)
(https://farm5.staticflickr.com/4678/38761414740_c291eb837a_b.jpg) (https://flic.kr/p/224dob9)
(https://farm5.staticflickr.com/4703/38761414730_f6dcd365f4_b.jpg) (https://flic.kr/p/224doaY)
(https://farm5.staticflickr.com/4781/25701019237_01cf91fa91_b.jpg) (https://flic.kr/p/Fa7rBk)TGR 910 CE (https://flic.kr/p/Fa7rBk) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on Flickr
Now I'm actually a bit disappointed because I wanted silver to begin with, voted for it in the IC form and then had to pick black because it wasn't offered as an option :(Don't be sad, bro. I had only 3 units made and 2 were sent back for rework. :'(
Hi guys, there was an unfortunate event, the second batch of shipment which is scheduled to be sent off tomorrow will be put on hold until the first batch is all delivered.What kind of unfortunate event?
Now I'm actually a bit disappointed because I wanted silver to begin with, voted for it in the IC form and then had to pick black because it wasn't offered as an option :(
Now I'm actually a bit disappointed because I wanted silver to begin with, voted for it in the IC form and then had to pick black because it wasn't offered as an option :(Don't be sad, bro. I had only 3 units made and 2 were sent back for rework. :'(
Now I'm actually a bit disappointed because I wanted silver to begin with, voted for it in the IC form and then had to pick black because it wasn't offered as an option :(
I can have silver because i spam him in PM, maybe he got sick of my PM and made my wish.
Also i pay extra money for it (in anodize manu, if you make only little number of color, well in this case maybe only 1 piece, you need to pay extra sh** to make it happen)
And i willing to accept if the unit doesn't go well or some sh** happen.
Haih i throwed extra bet for this color bro, not easy to make this color happened.
You see his statement, made 3 and 2 sent back for rework.
Now I'm actually a bit disappointed because I wanted silver to begin with, voted for it in the IC form and then had to pick black because it wasn't offered as an option :(Don't be sad, bro. I had only 3 units made and 2 were sent back for rework. :'(Now I'm actually a bit disappointed because I wanted silver to begin with, voted for it in the IC form and then had to pick black because it wasn't offered as an option :(
I can have silver because i spam him in PM, maybe he got sick of my PM and made my wish.
Also i pay extra money for it (in anodize manu, if you make only little number of color, well in this case maybe only 1 piece, you need to pay extra sh** to make it happen)
And i willing to accept if the unit doesn't go well or some sh** happen.
Haih i throwed extra bet for this color bro, not easy to make this color happened.
You see his statement, made 3 and 2 sent back for rework.
Oh, okay, still hyped for the black one so it's all good :thumb:
Waiting is over, please welcome Silver baby
(https://farm5.staticflickr.com/4786/40529044612_69d1116674_b.jpg) (https://flic.kr/p/24KpWXf)
TGR 910 CE (https://flic.kr/p/224doaY) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on FlickrShow ImageTGR 910 CE (https://flic.kr/p/224dob9) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on FlickrShow ImageTGR 910 CE (https://flic.kr/p/24KpWXf) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on FlickrShow ImageWaiting is over, please welcome Silver baby
(https://farm5.staticflickr.com/4786/40529044612_69d1116674_b.jpg) (https://flic.kr/p/24KpWXf)
(https://farm5.staticflickr.com/4678/38761414740_c291eb837a_b.jpg) (https://flic.kr/p/224dob9)
(https://farm5.staticflickr.com/4703/38761414730_f6dcd365f4_b.jpg) (https://flic.kr/p/224doaY)
(https://farm5.staticflickr.com/4781/25701019237_01cf91fa91_b.jpg) (https://flic.kr/p/Fa7rBk)TGR 910 CE (https://flic.kr/p/Fa7rBk) by Indra Thamrin (https://www.flickr.com/photos/155233308@N08/), on Flickr
Got mine put together and programmed. Could not be happier thank you so much for making this happen. Im glad this could be my first custom.
Got mine put together and programmed. Could not be happier thank you so much for making this happen. Im glad this could be my first custom.pics pls
Here's my 910ce EnjoyGlad that it arrived at you safely. Was so worried that your parcel went missing.
SA Valentine, Box Navies, Zeal Stabs, removed brass 910 blockerShow Image(https://i.imgur.com/jyWeiKA.jpg)
Here's my 910ce :) Enjoy
SA Valentine, Box Navies, Zeal Stabs, removed brass 910 blockerShow Image(https://i.imgur.com/jyWeiKA.jpg)
(Attachment Link)
(Attachment Link)Hot diggity dawg.. :o
(Attachment Link)
Hold up... I thought we weren't able to mismatch top and bottoms...?
(Attachment Link)
Hold up... I thought we weren't able to mismatch top and bottoms...?
could be that he a) bought a second one or b) is good friends with yuktsi
(Attachment Link)
Hold up... I thought we weren't able to mismatch top and bottoms...?
could be that he a) bought a second one or b) is good friends with yuktsi
another thought, he has 910 R1 and swap top
super duper low quality unfinished build picture
its got too dark to finish soldering here so just seeing what keycaps work well and I'm really pleased with sky dolch on it.Show Image(https://i.imgur.com/XQmX0nO.jpg)
(Attachment Link)
Hold up... I thought we weren't able to mismatch top and bottoms...?
could be that he a) bought a second one or b) is good friends with yuktsi
another thought, he has 910 R1 and swap top
(Attachment Link)
Hold up... I thought we weren't able to mismatch top and bottoms...?
could be that he a) bought a second one or b) is good friends with yuktsi
(Attachment Link)
Hold up... I thought we weren't able to mismatch top and bottoms...?
could be that he a) bought a second one or b) is good friends with yuktsi
another thought, he has 910 R1 and swap top
i think the 910 diffuser is wrong, but the grey is right so i've no ideasuper duper low quality unfinished build picture
its got too dark to finish soldering here so just seeing what keycaps work well and I'm really pleased with sky dolch on it.Show Image(https://i.imgur.com/XQmX0nO.jpg)
how do you have electricity to solder, but no lightbulbs
i become more curious about where you live every time you post about it
I thought yuktsi mentioned he doesn't like about R1 people entering this GB? I guess it's understandable that he favors friends and geekhack GB second but the fact there were other colours that he showed and then this mismatch colour bottom is slightly annoying but whatever. I'm probably a bit salty from this whole group buy... the fact that my unit got delayed and silver wasn't an option which I wanted that colour originally but you have one person bugging the **** out of yuktsi till he said yes.
I'm just going stay away from this thread from now on.(Attachment Link)
Hold up... I thought we weren't able to mismatch top and bottoms...?
could be that he a) bought a second one or b) is good friends with yuktsi
another thought, he has 910 R1 and swap top
Another fantastic TGR board, can't wait for the next Yuksti speical.Show Image(https://i.imgur.com/DkMycza.jpg)
Another fantastic TGR board, can't wait for the next Yuksti speical.Show Image(https://i.imgur.com/DkMycza.jpg)
this is very good
I thought yuktsi mentioned he doesn't like about R1 people entering this GB? I guess it's understandable that he favors friends and geekhack GB second but the fact there were other colours that he showed and then this mismatch colour bottom is slightly annoying but whatever. I'm probably a bit salty from this whole group buy... the fact that my unit got delayed and silver wasn't an option which I wanted that colour originally but you have one person bugging the **** out of yuktsi till he said yes.
I'm just going stay away from this thread from now on.(Attachment Link)
Hold up... I thought we weren't able to mismatch top and bottoms...?
could be that he a) bought a second one or b) is good friends with yuktsi
another thought, he has 910 R1 and swap top
a few 910 CEs are shipped, so could be that he bought one aftermarket
Another fantastic TGR board, can't wait for the next Yuksti speical.Show Image(https://i.imgur.com/DkMycza.jpg)
got mine in today, it looks amazing and the weight is unreal.
However theres a large dent on one corner =(
https://imgur.com/BqAL6RA
got mine in today, it looks amazing and the weight is unreal.
However theres a large dent on one corner =(
https://imgur.com/BqAL6RA
OOF
that's not good
one of the worst chips i've ever seen
shipping company must have dropped it HARD
got mine in today, it looks amazing and the weight is unreal.
However theres a large dent on one corner =(
https://imgur.com/BqAL6RA
OOF
that's not good
one of the worst chips i've ever seen
shipping company must have dropped it HARD
yea, it was a pretty painful discovery
got mine in today, it looks amazing and the weight is unreal.
However theres a large dent on one corner =(
https://imgur.com/BqAL6RA
OOF
that's not good
one of the worst chips i've ever seen
shipping company must have dropped it HARD
yea, it was a pretty painful discovery
out of curiosity, what country are you located in?
got mine in today, it looks amazing and the weight is unreal.
However theres a large dent on one corner =(
https://imgur.com/BqAL6RA
got mine in today, it looks amazing and the weight is unreal.
However theres a large dent on one corner =(
https://imgur.com/BqAL6RA
OOF
that's not good
one of the worst chips i've ever seen
shipping company must have dropped it HARD
yea, it was a pretty painful discovery
out of curiosity, what country are you located in?
USA, i'm in long beach CA
got mine in today, it looks amazing and the weight is unreal.
However theres a large dent on one corner =(
https://imgur.com/BqAL6RA
Please mark gore with a spoiler tag sir
got mine in today, it looks amazing and the weight is unreal.
However theres a large dent on one corner =(
https://imgur.com/BqAL6RA
OOF
that's not good
one of the worst chips i've ever seen
shipping company must have dropped it HARD
yea, it was a pretty painful discovery
out of curiosity, what country are you located in?
USA, i'm in long beach CA
weird, less common to see issues like this with US internal shipping
and yuktsi's packaging is usually very good too, so no clue how this happened
really unfortunate
got mine in today, it looks amazing and the weight is unreal.
However theres a large dent on one corner =(
https://imgur.com/BqAL6RA
Please mark gore with a spoiler tag sir
lol NSFW
got mine in today, it looks amazing and the weight is unreal.
However theres a large dent on one corner =(
https://imgur.com/BqAL6RA
Please mark gore with a spoiler tag sir
lol NSFW
jokes aside, you have my condolences. It's a real shame to see such a nice board in that state
I thought yuktsi mentioned he doesn't like about R1 people entering this GB? I guess it's understandable that he favors friends and geekhack GB second but the fact there were other colours that he showed and then this mismatch colour bottom is slightly annoying but whatever. I'm probably a bit salty from this whole group buy... the fact that my unit got delayed and silver wasn't an option which I wanted that colour originally but you have one person bugging the **** out of yuktsi till he said yes.
I'm just going stay away from this thread from now on.(Attachment Link)
Hold up... I thought we weren't able to mismatch top and bottoms...?
could be that he a) bought a second one or b) is good friends with yuktsi
another thought, he has 910 R1 and swap top
a few 910 CEs are shipped, so could be that he bought one aftermarket
got mine in today, it looks amazing and the weight is unreal.
However theres a large dent on one corner =(
https://imgur.com/BqAL6RA
Please mark gore with a spoiler tag sir
lol NSFW
jokes aside, you have my condolences. It's a real shame to see such a nice board in that state
I have terrible luck with things. I have the skeletor key set and the skeletor bbv2...which my dog chewed up and destroyed. The ONLY cap he got and it was the one meant for the board. Sad times
Damn.. Was the box jacked up?
Damn that's really weird, based on the packaging mine had... It would need to be like tossed out of a moving truck for that to happen. There must have been some seriously poor handling from SF Express.
Damn that's really weird, based on the packaging mine had... It would need to be like tossed out of a moving truck for that to happen. There must have been some seriously poor handling from SF Express.
SF express in norcal gets passed onto UPS for delivery. Not sure about socal. They've managed to damage a lot of my things. They crushed an HDD that was sent to me in one of those triple wall mailers.
I thought yuktsi mentioned he doesn't like about R1 people entering this GB? I guess it's understandable that he favors friends and geekhack GB second but the fact there were other colours that he showed and then this mismatch colour bottom is slightly annoying but whatever. I'm probably a bit salty from this whole group buy... the fact that my unit got delayed and silver wasn't an option which I wanted that colour originally but you have one person bugging the **** out of yuktsi till he said yes.
I'm just going stay away from this thread from now on.(Attachment Link)
Hold up... I thought we weren't able to mismatch top and bottoms...?
could be that he a) bought a second one or b) is good friends with yuktsi
another thought, he has 910 R1 and swap top
Damn that's really weird, based on the packaging mine had... It would need to be like tossed out of a moving truck for that to happen. There must have been some seriously poor handling from SF Express.
SF express in norcal gets passed onto UPS for delivery. Not sure about socal. They've managed to damage a lot of my things. They crushed an HDD that was sent to me in one of those triple wall mailers.
yea, i picked up my board from a UPS center after I missed the initial attempted delivery =x
Damn that's really weird, based on the packaging mine had... It would need to be like tossed out of a moving truck for that to happen. There must have been some seriously poor handling from SF Express.
SF express in norcal gets passed onto UPS for delivery. Not sure about socal. They've managed to damage a lot of my things. They crushed an HDD that was sent to me in one of those triple wall mailers.
yea, i picked up my board from a UPS center after I missed the initial attempted delivery =x
Their attempted delivery must have been airdropping it at your house without a parachute
I thought yuktsi mentioned he doesn't like about R1 people entering this GB? I guess it's understandable that he favors friends and geekhack GB second but the fact there were other colours that he showed and then this mismatch colour bottom is slightly annoying but whatever. I'm probably a bit salty from this whole group buy... the fact that my unit got delayed and silver wasn't an option which I wanted that colour originally but you have one person bugging the **** out of yuktsi till he said yes.
I'm just going stay away from this thread from now on.(Attachment Link)
Hold up... I thought we weren't able to mismatch top and bottoms...?
could be that he a) bought a second one or b) is good friends with yuktsi
another thought, he has 910 R1 and swap top
IF you feel salty, you can buy mine though
I thought yuktsi mentioned he doesn't like about R1 people entering this GB? I guess it's understandable that he favors friends and geekhack GB second but the fact there were other colours that he showed and then this mismatch colour bottom is slightly annoying but whatever. I'm probably a bit salty from this whole group buy... the fact that my unit got delayed and silver wasn't an option which I wanted that colour originally but you have one person bugging the **** out of yuktsi till he said yes.
I'm just going stay away from this thread from now on.(Attachment Link)
Hold up... I thought we weren't able to mismatch top and bottoms...?
could be that he a) bought a second one or b) is good friends with yuktsi
another thought, he has 910 R1 and swap top
IF you feel salty, you can buy mine though
What. Color.
I thought yuktsi mentioned he doesn't like about R1 people entering this GB? I guess it's understandable that he favors friends and geekhack GB second but the fact there were other colours that he showed and then this mismatch colour bottom is slightly annoying but whatever. I'm probably a bit salty from this whole group buy... the fact that my unit got delayed and silver wasn't an option which I wanted that colour originally but you have one person bugging the **** out of yuktsi till he said yes.
I'm just going stay away from this thread from now on.(Attachment Link)
Hold up... I thought we weren't able to mismatch top and bottoms...?
could be that he a) bought a second one or b) is good friends with yuktsi
another thought, he has 910 R1 and swap top
IF you feel salty, you can buy mine though
What. Color.
The only Silver made for this round, i offer my Silver to who feel salty.
It's fair, right ?
got mine in today, it looks amazing and the weight is unreal.Yea mine has the same issue but on the bottom left, Package undamaged and not open by customs.
However theres a large dent on one corner =(
https://imgur.com/BqAL6RA
got mine in today, it looks amazing and the weight is unreal.Yea mine has the same issue but on the bottom left, Package undamaged and not open by customs.
However theres a large dent on one corner =(
https://imgur.com/BqAL6RAMoreShow Image(https://i.imgur.com/edRVyw2.jpg)
Ive spoke to yuktsi and he asked me to file a claim to the courier, not exactly sure on how to do this would it be best to phone them up? the courier I have on the label for Australia delivery is Startrack.
Sorry for the super dumb question I am just really awful with dealing with things like this.
got mine in today, it looks amazing and the weight is unreal.Yea mine has the same issue but on the bottom left, Package undamaged and not open by customs.
However theres a large dent on one corner =(
https://imgur.com/BqAL6RAMoreShow Image(https://i.imgur.com/edRVyw2.jpg)
Ive spoke to yuktsi and he asked me to file a claim to the courier, not exactly sure on how to do this would it be best to phone them up? the courier I have on the label for Australia delivery is Startrack.
Sorry for the super dumb question I am just really awful with dealing with things like this.
Everyone who hasn't got theirs yet is now quietly freakin out a little. :-X
Everyone who hasn't got theirs yet is now quietly freakin out a little. :-X
It will ship by batch, there are 8 people ordered from Indonesia, 4 have received already, the rest is later.
Sent from my iPhone using Tapatalk
got mine in today, it looks amazing and the weight is unreal.Yea mine has the same issue but on the bottom left, Package undamaged and not open by customs.
However theres a large dent on one corner =(
https://imgur.com/BqAL6RAMoreShow Image(https://i.imgur.com/edRVyw2.jpg)
Ive spoke to yuktsi and he asked me to file a claim to the courier, not exactly sure on how to do this would it be best to phone them up? the courier I have on the label for Australia delivery is Startrack.
Sorry for the super dumb question I am just really awful with dealing with things like this.
Well if the package is undamaged and unopened, I don't see any reason why it would be the courier. It was well packaged right?got mine in today, it looks amazing and the weight is unreal.Yea mine has the same issue but on the bottom left, Package undamaged and not open by customs.
However theres a large dent on one corner =(
https://imgur.com/BqAL6RAMoreShow Image(https://i.imgur.com/edRVyw2.jpg)
Ive spoke to yuktsi and he asked me to file a claim to the courier, not exactly sure on how to do this would it be best to phone them up? the courier I have on the label for Australia delivery is Startrack.
Sorry for the super dumb question I am just really awful with dealing with things like this.
got mine in today, it looks amazing and the weight is unreal.So sorry to hear that :'(
However theres a large dent on one corner =(
https://imgur.com/BqAL6RA
Man, I hope I can get in on the extras... the red on TGR boards is the best I've ever laid eyes on
Man, I hope I can get in on the extras... the red on TGR boards is the best I've ever laid eyes on
Man, I hope I can get in on the extras... the red on TGR boards is the best I've ever laid eyes on
I believe extras are reserved for special condition, not for sale
Sent from my iPhone using Tapatalk
If you are looking for extras, I would recommend losing all hope. Didn't there used to be a rule about commenting on GB's you're not in?There are no rules regarding this atm, however there is a rule regarding thread-crapping, so if you are looking for extras (idk if they even exist) talk to yuktsi to avoid excessive posting :)
If you are looking for extras, I would recommend losing all hope. Didn't there used to be a rule about commenting on GB's you're not in?There are no rules regarding this atm, however there is a rule regarding thread-crapping, so if you are looking for extras (idk if they even exist) talk to yuktsi to avoid excessive posting :)
If you are looking for extras, I would recommend losing all hope. Didn't there used to be a rule about commenting on GB's you're not in?
no need for hostility
I'm not going to solicit extras, that's pretty underhanded and sleazy
I just remember reading something about it in this thread and made a half assed post about it
My post wasn't directed at anyone, it was made to clear up the statement Mr_BeastQuake made, and give guidelines for those in the future looking for extras. No harm done!If you are looking for extras, I would recommend losing all hope. Didn't there used to be a rule about commenting on GB's you're not in?There are no rules regarding this atm, however there is a rule regarding thread-crapping, so if you are looking for extras (idk if they even exist) talk to yuktsi to avoid excessive posting :)
aight, I'm not here to threadcrap or solicit a sale on extras
I'll keep my nose out of here if that is what I'm supposed to do
If you are looking for extras, I would recommend losing all hope. Didn't there used to be a rule about commenting on GB's you're not in?
Let's get back to the GB discussion :)
Thank you Capt. The keyset looks amazing, is it GMK?
Btw, there will be no extra for sale. If you are keen for one, you may dm me. I have prototype coming from time to time, and if it's good, I may sell.
Shipping will resume tmr. Got some extra foam and bigger boxes. As for the delayed units, I should be collecting them this week. Thanks.
I looked over the box more today pushed a few places and noticed this is the only damaged part of it. Was barely visible till I pushed the cardboard a bit.
Such a tiny hole causing such damage.Show Image(https://i.imgur.com/ILAHpaH.jpg)
Thank you Capt. The keyset looks amazing, is it GMK?
I think that's this one https://www.originativeco.com/products/pbt-valentine :cool:
me waiting for my package be like.... :-\Show Image(https://i.imgur.com/dYUhNy7.jpg)
I looked over the box more today pushed a few places and noticed this is the only damaged part of it. Was barely visible till I pushed the cardboard a bit.
Such a tiny hole causing such damage.Show Image(https://i.imgur.com/ILAHpaH.jpg)
Yup, this is exactly what I've seen with the X60. No matter the packaging, it seems unavoidable, and just based on luck.
Yup, this is exactly what I've seen with the X60. No matter the packaging, it seems unavoidable, and just based on luck.
Unavoidable you say... starts lining the inside his boxes with sheet metal
I looked over the box more today pushed a few places and noticed this is the only damaged part of it. Was barely visible till I pushed the cardboard a bit.
Such a tiny hole causing such damage.Show Image(https://i.imgur.com/ILAHpaH.jpg)
I looked over the box more today pushed a few places and noticed this is the only damaged part of it. Was barely visible till I pushed the cardboard a bit.
Such a tiny hole causing such damage.Show Image(https://i.imgur.com/ILAHpaH.jpg)
You're not the only one. I had a similar incident like yours but much worse.
Delivery boy handed it to me with the parcel already opened and there is no way to close it without tape :Show Image(https://i.imgur.com/ewS0iXk.jpg)
Bought a keyboard case from a nice vendor in GH. Mine was hijacked, product originally was nicely kept in stretch wrap with thick foam around it in the box but somehow product box was gone/stolen away from the parcel box and was replaced with thick bubble wrapper then a blade slashes through that thick bubble wrapper and right into the case.Show Image(https://i.imgur.com/5AY7Pq5.jpg)Show Image(https://i.imgur.com/aHHjKoR.jpg)Show Image(https://i.imgur.com/8dNGapS.jpg)
According to the tracking, it stated the parcel only goes through 1 custom facility and successfully went through without any problems.
So just to share this incident, I believe there are even worst things could happen during transit even the case is fully protected by foams or bubble wraps. Has anyone have this type of incident during transit? Or I'm just unlucky? :( :'(
I looked over the box more today pushed a few places and noticed this is the only damaged part of it. Was barely visible till I pushed the cardboard a bit.
Such a tiny hole causing such damage.Show Image(https://i.imgur.com/ILAHpaH.jpg)
You're not the only one. I had a similar incident like yours but much worse.
Delivery boy handed it to me with the parcel already opened and there is no way to close it without tape :Show Image(https://i.imgur.com/ewS0iXk.jpg)
Bought a keyboard case from a nice vendor in GH. Mine was hijacked, product originally was nicely kept in stretch wrap with thick foam around it in a box and kept inside the postal parcel box but somehow product box was gone/stolen away from the parcel box and was replaced with thick bubble wrapper re-stash it back into the parcel box then a blade slashes through that thick bubble wrapper and right into the case.Show Image(https://i.imgur.com/5AY7Pq5.jpg)Show Image(https://i.imgur.com/aHHjKoR.jpg)Show Image(https://i.imgur.com/8dNGapS.jpg)
According to the tracking, it stated the parcel only goes through 1 custom facility and successfully went through without any problems.
So just to share this incident, I believe there are even worst things could happen during transit even the case is fully protected by foams or bubble wraps. Or maybe it went to the wrong custom agent hands to inspect them. Has anyone have this type of incident during transit? Or I'm just unlucky? :( :'(
EDIT : Made some changes in the post for better understanding.
me waiting for my package be like.... :-\Show Image(https://i.imgur.com/dYUhNy7.jpg)
That's not the way to pack a board imo.I looked over the box more today pushed a few places and noticed this is the only damaged part of it. Was barely visible till I pushed the cardboard a bit.
Such a tiny hole causing such damage.Show Image(https://i.imgur.com/ILAHpaH.jpg)
You're not the only one. I had a similar incident like yours but much worse.
Delivery boy handed it to me with the parcel already opened and there is no way to close it without tape :Show Image(https://i.imgur.com/ewS0iXk.jpg)
Bought a keyboard case with some kits(this was a bundle together with the case) from a nice vendor in GH. After confirming with the vendor how it was packed, mine was hijacked, product originally was nicely kept in stretch wrap with thick foam around it in a box and kept inside the postal parcel box but somehow product box was gone/stolen away from the parcel box and was replaced with thick bubble wrapper, re-stash it back into the parcel box then a blade slashes through that thick bubble wrapper and right into the case.Show Image(https://i.imgur.com/5AY7Pq5.jpg)Show Image(https://i.imgur.com/aHHjKoR.jpg)Show Image(https://i.imgur.com/8dNGapS.jpg)
According to the tracking, it stated the parcel only goes through 1 custom facility and successfully went through without any problems.
So just to share this incident, I believe there are even worst things could happen during transit even the case is fully protected by foams or bubble wraps. Or maybe it went to the wrong custom agent hands to inspect them. Has anyone have this type of incident during transit? Or I'm just unlucky? :( :'(
EDIT : Made some changes in the post for better understanding.
That's not the way to pack a board imo.I looked over the box more today pushed a few places and noticed this is the only damaged part of it. Was barely visible till I pushed the cardboard a bit.
Such a tiny hole causing such damage.Show Image(https://i.imgur.com/ILAHpaH.jpg)
You're not the only one. I had a similar incident like yours but much worse.
Delivery boy handed it to me with the parcel already opened and there is no way to close it without tape :Show Image(https://i.imgur.com/ewS0iXk.jpg)
Bought a keyboard case with some kits(this was a bundle together with the case) from a nice vendor in GH. After confirming with the vendor how it was packed, mine was hijacked, product originally was nicely kept in stretch wrap with thick foam around it in a box and kept inside the postal parcel box but somehow product box was gone/stolen away from the parcel box and was replaced with thick bubble wrapper, re-stash it back into the parcel box then a blade slashes through that thick bubble wrapper and right into the case.Show Image(https://i.imgur.com/5AY7Pq5.jpg)Show Image(https://i.imgur.com/aHHjKoR.jpg)Show Image(https://i.imgur.com/8dNGapS.jpg)
According to the tracking, it stated the parcel only goes through 1 custom facility and successfully went through without any problems.
So just to share this incident, I believe there are even worst things could happen during transit even the case is fully protected by foams or bubble wraps. Or maybe it went to the wrong custom agent hands to inspect them. Has anyone have this type of incident during transit? Or I'm just unlucky? :( :'(
EDIT : Made some changes in the post for better understanding.
That's not the way to pack a board imo.I looked over the box more today pushed a few places and noticed this is the only damaged part of it. Was barely visible till I pushed the cardboard a bit.
Such a tiny hole causing such damage.Show Image(https://i.imgur.com/ILAHpaH.jpg)
You're not the only one. I had a similar incident like yours but much worse.
Delivery boy handed it to me with the parcel already opened and there is no way to close it without tape :Show Image(https://i.imgur.com/ewS0iXk.jpg)
Bought a keyboard case with some kits(this was a bundle together with the case) from a nice vendor in GH. After confirming with the vendor how it was packed, mine was hijacked, product originally was nicely kept in stretch wrap with thick foam around it in a box and kept inside the postal parcel box but somehow product box was gone/stolen away from the parcel box and was replaced with thick bubble wrapper, re-stash it back into the parcel box then a blade slashes through that thick bubble wrapper and right into the case.Show Image(https://i.imgur.com/5AY7Pq5.jpg)Show Image(https://i.imgur.com/aHHjKoR.jpg)Show Image(https://i.imgur.com/8dNGapS.jpg)
According to the tracking, it stated the parcel only goes through 1 custom facility and successfully went through without any problems.
So just to share this incident, I believe there are even worst things could happen during transit even the case is fully protected by foams or bubble wraps. Or maybe it went to the wrong custom agent hands to inspect them. Has anyone have this type of incident during transit? Or I'm just unlucky? :( :'(
EDIT : Made some changes in the post for better understanding.
i've seen things like this happen with a few boards, they use a pretty big knife to open the package and sometimes **** just gets ****ed up
and i think he said somewhere that they repacked it after opening it
I've also received a damaged board with a hole on the side that went through the foam.
That makes too much sense. Stab the package, sniff to check. If it drugs, you sell it and no one will file a complaint.I've also received a damaged board with a hole on the side that went through the foam.
Are you talking about this GB or sometime in the past? If it's this GB that's mental. Is that three 910s now with holes poked through the boxes?
A bit of googling gives a bunch of darkweb chat about postal workers probing for drugs. Maybe that's it?
This is very sinister :oThat makes too much sense. Stab the package, sniff to check. If it drugs, you sell it and no one will file a complaint.I've also received a damaged board with a hole on the side that went through the foam.
Are you talking about this GB or sometime in the past? If it's this GB that's mental. Is that three 910s now with holes poked through the boxes?
A bit of googling gives a bunch of darkweb chat about postal workers probing for drugs. Maybe that's it?
This is very sinister :oThat makes too much sense. Stab the package, sniff to check. If it drugs, you sell it and no one will file a complaint.I've also received a damaged board with a hole on the side that went through the foam.
Are you talking about this GB or sometime in the past? If it's this GB that's mental. Is that three 910s now with holes poked through the boxes?
A bit of googling gives a bunch of darkweb chat about postal workers probing for drugs. Maybe that's it?
Sent from my iPhone using Tapatalk
This is very sinister :oThat makes too much sense. Stab the package, sniff to check. If it drugs, you sell it and no one will file a complaint.I've also received a damaged board with a hole on the side that went through the foam.
Are you talking about this GB or sometime in the past? If it's this GB that's mental. Is that three 910s now with holes poked through the boxes?
A bit of googling gives a bunch of darkweb chat about postal workers probing for drugs. Maybe that's it?
Sent from my iPhone using Tapatalk
Just checked my packaging it was definitely stabbed after the boards were packed. the hole went through the box and into the board.Show Image(https://i.imgur.com/2BhyOeR.jpg)
This is very sinister :oThat makes too much sense. Stab the package, sniff to check. If it drugs, you sell it and no one will file a complaint.I've also received a damaged board with a hole on the side that went through the foam.
Are you talking about this GB or sometime in the past? If it's this GB that's mental. Is that three 910s now with holes poked through the boxes?
A bit of googling gives a bunch of darkweb chat about postal workers probing for drugs. Maybe that's it?
Sent from my iPhone using Tapatalk
Just checked my packaging it was definitely stabbed after the boards were packed. the hole went through the box and into the board.Show Image(https://i.imgur.com/2BhyOeR.jpg)
that's so ****ing weird
I'm guessing they're all from the same shipment? If they've all been stabbed in the same place i wonder if it's happened right at the start of the chain, very soon after Yuktsi has dropped them off, before they've started being split up for their various destinations. Probably while they're still stacked together. I bet it's just one person testing a few of them to see if there's anything worth nicking. Maybe someone at the post office or a van driver.
Yeah, the damaged ones all went out on the same day :-[This is very sinister :oThat makes too much sense. Stab the package, sniff to check. If it drugs, you sell it and no one will file a complaint.I've also received a damaged board with a hole on the side that went through the foam.
Are you talking about this GB or sometime in the past? If it's this GB that's mental. Is that three 910s now with holes poked through the boxes?
A bit of googling gives a bunch of darkweb chat about postal workers probing for drugs. Maybe that's it?
Sent from my iPhone using Tapatalk
Just checked my packaging it was definitely stabbed after the boards were packed. the hole went through the box and into the board.Show Image(https://i.imgur.com/2BhyOeR.jpg)
that's so ****ing weird
I'm guessing they're all from the same shipment? If they've all been stabbed in the same place i wonder if it's happened right at the start of the chain, very soon after Yuktsi has dropped them off, before they've started being split up for their various destinations. Probably while they're still stacked together. I bet it's just one person testing a few of them to see if there's anything worth nicking. Maybe someone at the post office or a van driver.
The geekhack detective squad has solved the case!Yeah, the damaged ones all went out on the same day :-[This is very sinister :oThat makes too much sense. Stab the package, sniff to check. If it drugs, you sell it and no one will file a complaint.I've also received a damaged board with a hole on the side that went through the foam.
Are you talking about this GB or sometime in the past? If it's this GB that's mental. Is that three 910s now with holes poked through the boxes?
A bit of googling gives a bunch of darkweb chat about postal workers probing for drugs. Maybe that's it?
Sent from my iPhone using Tapatalk
Just checked my packaging it was definitely stabbed after the boards were packed. the hole went through the box and into the board.Show Image(https://i.imgur.com/2BhyOeR.jpg)
that's so ****ing weird
I'm guessing they're all from the same shipment? If they've all been stabbed in the same place i wonder if it's happened right at the start of the chain, very soon after Yuktsi has dropped them off, before they've started being split up for their various destinations. Probably while they're still stacked together. I bet it's just one person testing a few of them to see if there's anything worth nicking. Maybe someone at the post office or a van driver.
Wanted to post up my 910 before it sits too long. I have already corrected the crooked caps but I haven't had a chance to take new photos in this perfect New England weather.
Yeah, the damaged ones all went out on the same day :-[This is very sinister :oThat makes too much sense. Stab the package, sniff to check. If it drugs, you sell it and no one will file a complaint.I've also received a damaged board with a hole on the side that went through the foam.
Are you talking about this GB or sometime in the past? If it's this GB that's mental. Is that three 910s now with holes poked through the boxes?
A bit of googling gives a bunch of darkweb chat about postal workers probing for drugs. Maybe that's it?
Sent from my iPhone using Tapatalk
Just checked my packaging it was definitely stabbed after the boards were packed. the hole went through the box and into the board.Show Image(https://i.imgur.com/2BhyOeR.jpg)
that's so ****ing weird
I'm guessing they're all from the same shipment? If they've all been stabbed in the same place i wonder if it's happened right at the start of the chain, very soon after Yuktsi has dropped them off, before they've started being split up for their various destinations. Probably while they're still stacked together. I bet it's just one person testing a few of them to see if there's anything worth nicking. Maybe someone at the post office or a van driver.
All these "pen pushing" damage reminds me of renewing my credit card when the bank changes their terms. I had to go to the bank when my card can no longer be used and then replaced me a new one but I have to give the old one to them. They punch holes to the old one and threw them in the bin.
Back to topic. Maybe those hole punches is their clearance signal before shipping out? Changing different courier company could solve it since different people will handle it. Or the cheap way, you could make a clay around the case and wait for it to be hardened before shipping out but I'm not sure how different customs from around the world handle it. :thumb:
All these "pen pushing" damage reminds me of renewing my credit card when the bank changes their terms. I had to go to the bank when my card can no longer be used and then replaced me a new one but I have to give the old one to them. They punch holes to the old one and threw them in the bin.
Back to topic. Maybe those hole punches is their clearance signal before shipping out? Changing different courier company could solve it since different people will handle it. Or the cheap way, you could make a clay around the case and wait for it to be hardened before shipping out but I'm not sure how different customs from around the world handle it. :thumb:
If part of a courier company's official process is to jam a sharp metal object into every package they handle I can't imagine that company would survive very long.
All these "pen pushing" damage reminds me of renewing my credit card when the bank changes their terms. I had to go to the bank when my card can no longer be used and then replaced me a new one but I have to give the old one to them. They punch holes to the old one and threw them in the bin.
Back to topic. Maybe those hole punches is their clearance signal before shipping out? Changing different courier company could solve it since different people will handle it. Or the cheap way, you could make a clay around the case and wait for it to be hardened before shipping out but I'm not sure how different customs from around the world handle it. :thumb:
If part of a courier company's official process is to jam a sharp metal object into every package they handle I can't imagine that company would survive very long.
I guess hole in a package is a normal thing now since there are lots of similar complaints, it could be a sharp stamping machine they used to validate as "safe". I couldn't imagine using their own hands to stab it that hard piercing through the box and onto the valuable goods.
All these "pen pushing" damage reminds me of renewing my credit card when the bank changes their terms. I had to go to the bank when my card can no longer be used and then replaced me a new one but I have to give the old one to them. They punch holes to the old one and threw them in the bin.
Back to topic. Maybe those hole punches is their clearance signal before shipping out? Changing different courier company could solve it since different people will handle it. Or the cheap way, you could make a clay around the case and wait for it to be hardened before shipping out but I'm not sure how different customs from around the world handle it. :thumb:
If part of a courier company's official process is to jam a sharp metal object into every package they handle I can't imagine that company would survive very long.
I guess hole in a package is a normal thing now since there are lots of similar complaints, it could be a sharp stamping machine they used to validate as "safe". I couldn't imagine using their own hands to stab it that hard piercing through the box and onto the valuable goods.
Heys ive run into an issue with the PCB. I went to install LEDs today and go the "USB device not recognized" went into device manager and it shows "device has reported problems (Code 43)". Normally this would be a driver issue or hardware issues. Prior to installing leds everything was working fine, had been using the keyboard all week. What is the default key to force it to boot only the bootloader without loading the firmware, so I can reflash it? Also has anyone installed LEDs on theirs yet? If so any issues? Im using warm white leds (https://shop.evilmadscientist.com/productsmenu/partsmenu/596), with sip sockets.UPDATE: I jumped the fw_jp points on the PCB and placed an led on the caps lock. LED flashed so the pcb works fine. Would someone be willing to send me a hex to load. Like an idiot I did not make a copy of mine before all this happened.
Finally assembled, best keyboard I ever have!Hot damn 👌🏻
(Attachment Link)
I sent an additional bottom to be re-anodised to purple for you.Finally assembled, best keyboard I ever have!Hot damn 👌🏻
(Attachment Link)
Also how we looking for time on replacement parts?
Has anyone managed to get the RGB underglow working? I soldered on the chip and the one RGB LED that goes right below the logo cutout. I think I did a good enough job but tiny SMD components are a bit iffy to get on right. I'm pretty sure I soldered them with the right orientation. I enabled RGB in the bootmapper client but nothing happens.Hi, can you take a picture of the PCB?
Has anyone managed to get the RGB underglow working? I soldered on the chip and the one RGB LED that goes right below the logo cutout. I think I did a good enough job but tiny SMD components are a bit iffy to get on right. I'm pretty sure I soldered them with the right orientation. I enabled RGB in the bootmapper client but nothing happens.Hi, can you take a picture of the PCB?
Sent from my iPhone using Tapatalk
Has anyone managed to get the RGB underglow working? I soldered on the chip and the one RGB LED that goes right below the logo cutout. I think I did a good enough job but tiny SMD components are a bit iffy to get on right. I'm pretty sure I soldered them with the right orientation. I enabled RGB in the bootmapper client but nothing happens.Hi, can you take a picture of the PCB?
Sent from my iPhone using Tapatalk
Here are a few that don't suck too much, unlike my soldering skills. https://imgur.com/a/ayPKw (https://imgur.com/a/ayPKw) Looking at the photo with zoom, I guess I could try doing a better job, but the pins looks like they are all connected. In case you can't see in the photo, the chip's dot is in the upper left and the RGB LED's marked corner is in the upper right.
Thanks for taking a look Yuktsi. First time doing any SMD work and using bootmapper.
Has anyone managed to get the RGB underglow working? I soldered on the chip and the one RGB LED that goes right below the logo cutout. I think I did a good enough job but tiny SMD components are a bit iffy to get on right. I'm pretty sure I soldered them with the right orientation. I enabled RGB in the bootmapper client but nothing happens.Hi, can you take a picture of the PCB?
Sent from my iPhone using Tapatalk
Here are a few that don't suck too much, unlike my soldering skills. https://imgur.com/a/ayPKw (https://imgur.com/a/ayPKw) Looking at the photo with zoom, I guess I could try doing a better job, but the pins looks like they are all connected. In case you can't see in the photo, the chip's dot is in the upper left and the RGB LED's marked corner is in the upper right.
Thanks for taking a look Yuktsi. First time doing any SMD work and using bootmapper.
If the 8-pin is the rgb microcontroller then the judging by the fourth pic you might have messed up a trace, but what is more likely judging by the second pic is that a little bit of your solder blob is touching the blob from another pin and shorting out or something
I don't solder keebs in particular so afaik it's the second problem I listed which is very common
Has anyone managed to get the RGB underglow working? I soldered on the chip and the one RGB LED that goes right below the logo cutout. I think I did a good enough job but tiny SMD components are a bit iffy to get on right. I'm pretty sure I soldered them with the right orientation. I enabled RGB in the bootmapper client but nothing happens.Hi, can you take a picture of the PCB?
Sent from my iPhone using Tapatalk
Here are a few that don't suck too much, unlike my soldering skills. https://imgur.com/a/ayPKw (https://imgur.com/a/ayPKw) Looking at the photo with zoom, I guess I could try doing a better job, but the pins looks like they are all connected. In case you can't see in the photo, the chip's dot is in the upper left and the RGB LED's marked corner is in the upper right.
Thanks for taking a look Yuktsi. First time doing any SMD work and using bootmapper.
If the 8-pin is the rgb microcontroller then the judging by the fourth pic you might have messed up a trace, but what is more likely judging by the second pic is that a little bit of your solder blob is touching the blob from another pin and shorting out or something
I don't solder keebs in particular so afaik it's the second problem I listed which is very common
Thanks for the suggestion. I tried to clean up the RGB microcontroller as best I could, making sure none of the pins were connected with a random solder bridge. Using a 3x lens it looked alright. I added another LED to be sure it wasn't that but it didn't work either. So either the microcontroller is still messed up or I am using the software incorrectly. It shouldn't matter how many LEDs are soldered, it's not like I need to add all of them for it to work right?
I cant speak to this pcb, but in my past i have ran into issues with the leds. The TX1800 has to have the complete circuit in order to function. So it may be worth checking over the rest of the leds and making sure there arent any issues.
QuoteI cant speak to this pcb, but in my past i have ran into issues with the leds. The TX1800 has to have the complete circuit in order to function. So it may be worth checking over the rest of the leds and making sure there arent any issues.
Interesting, I didn't consider that it would require a complete circuit to work. I was hoping it would work with just one so that I wouldn't waste time if I couldn't figure it out. I can try soldering the rest of the LEDs and see if that fixes it.
Hi there, the RGB LEDs are all connected in a series circuit. The LED that you soldered won't light up until all the LEDs before it is soldered. The first LEDs is located under the "7&" key, and the rest goes in clock-wise.QuoteI cant speak to this pcb, but in my past i have ran into issues with the leds. The TX1800 has to have the complete circuit in order to function. So it may be worth checking over the rest of the leds and making sure there arent any issues.
Interesting, I didn't consider that it would require a complete circuit to work. I was hoping it would work with just one so that I wouldn't waste time if I couldn't figure it out. I can try soldering the rest of the LEDs and see if that fixes it.
Hi there, the RGB LEDs are all connected in a series circuit. The LED that you soldered won't light up until all the LEDs before it is soldered. The first LEDs is located under the "7&" key, and the rest goes in clock-wise.QuoteI cant speak to this pcb, but in my past i have ran into issues with the leds. The TX1800 has to have the complete circuit in order to function. So it may be worth checking over the rest of the leds and making sure there arent any issues.
Interesting, I didn't consider that it would require a complete circuit to work. I was hoping it would work with just one so that I wouldn't waste time if I couldn't figure it out. I can try soldering the rest of the LEDs and see if that fixes it.
Thanks.
Hi there, the RGB LEDs are all connected in a series circuit. The LED that you soldered won't light up until all the LEDs before it is soldered. The first LEDs is located under the "7&" key, and the rest goes in clock-wise.QuoteI cant speak to this pcb, but in my past i have ran into issues with the leds. The TX1800 has to have the complete circuit in order to function. So it may be worth checking over the rest of the leds and making sure there arent any issues.
Interesting, I didn't consider that it would require a complete circuit to work. I was hoping it would work with just one so that I wouldn't waste time if I couldn't figure it out. I can try soldering the rest of the LEDs and see if that fixes it.
Thanks.
That worked! I soldered the RGB LED under the 7 key and when I plugged it in it lit up using the color I set in bootmapper. Looks like I know what I'll be doing the rest of tonight :) Thanks again.
Hi there, the RGB LEDs are all connected in a series circuit. The LED that you soldered won't light up until all the LEDs before it is soldered. The first LEDs is located under the "7&" key, and the rest goes in clock-wise.QuoteI cant speak to this pcb, but in my past i have ran into issues with the leds. The TX1800 has to have the complete circuit in order to function. So it may be worth checking over the rest of the leds and making sure there arent any issues.
Interesting, I didn't consider that it would require a complete circuit to work. I was hoping it would work with just one so that I wouldn't waste time if I couldn't figure it out. I can try soldering the rest of the LEDs and see if that fixes it.
Thanks.
That worked! I soldered the RGB LED under the 7 key and when I plugged it in it lit up using the color I set in bootmapper. Looks like I know what I'll be doing the rest of tonight :) Thanks again.
Glad to hear that was the issue. When i was building my TX1800 I had an issue with one of the first led's in the series and couldnt for the life of me figure out what the problem was. Always nice when the fix is somewhat simple :)
I can't stop giggling like a little girl.Beautiful.Show Image(https://imgur.com/J7XR435.png)Show Image(https://imgur.com/lNiziDV.png)Show Image(https://imgur.com/PpD3pcn.png)Show Image(https://imgur.com/LPntnzU.png)
I can't stop giggling like a little girl.StunningShow Image(https://imgur.com/J7XR435.png)Show Image(https://imgur.com/lNiziDV.png)Show Image(https://imgur.com/PpD3pcn.png)Show Image(https://imgur.com/LPntnzU.png)
I can't stop giggling like a little girl.what switches are those? The 9009 goes surprisingly well with the black case.Show Image(https://imgur.com/J7XR435.png)Show Image(https://imgur.com/lNiziDV.png)Show Image(https://imgur.com/PpD3pcn.png)Show Image(https://imgur.com/LPntnzU.png)
I can't stop giggling like a little girl.what switches are those? The 9009 goes surprisingly well with the black case.Show Image(https://imgur.com/J7XR435.png)Show Image(https://imgur.com/lNiziDV.png)Show Image(https://imgur.com/PpD3pcn.png)Show Image(https://imgur.com/LPntnzU.png)
I can't stop giggling like a little girl.what switches are those? The 9009 goes surprisingly well with the black case.Show Image(https://imgur.com/J7XR435.png)Show Image(https://imgur.com/lNiziDV.png)Show Image(https://imgur.com/PpD3pcn.png)Show Image(https://imgur.com/LPntnzU.png)
Ergo clears in BSUN brown housings, with tribosys lube and black poly films. Still a little scratchy though, gotta get better at lubing. Unfortunately I couldn't get my hands on any pandas so I made the next best thing I could think of.
I wasn't sure I'd like the 9009 but I totally agree. I might swap it out for solarized dark when I finally get it.
Any way to get the acrylic mid layer post GB?I can send you the fie for you, and you may get someone to get it cut for you.
That would be awesome!Any way to get the acrylic mid layer post GB?I can send you the fie for you, and you may get someone to get it cut for you.
The promised pics:Amazing.Show Image(https://i.imgur.com/fr61wOh.jpg)Show Image(https://i.imgur.com/1cMNmLE.jpg)Show Image(https://i.imgur.com/QiQU3Kp.jpg)Show Image(https://i.imgur.com/eNxFjEj.jpg)Show Image(https://i.imgur.com/5iilUyY.jpg)
The promised pics:ffff that looks goodShow Image(https://i.imgur.com/fr61wOh.jpg)Show Image(https://i.imgur.com/1cMNmLE.jpg)Show Image(https://i.imgur.com/QiQU3Kp.jpg)Show Image(https://i.imgur.com/eNxFjEj.jpg)Show Image(https://i.imgur.com/5iilUyY.jpg)
The promised pics:Show Image(https://i.imgur.com/fr61wOh.jpg)Show Image(https://i.imgur.com/1cMNmLE.jpg)Show Image(https://i.imgur.com/QiQU3Kp.jpg)Show Image(https://i.imgur.com/eNxFjEj.jpg)Show Image(https://i.imgur.com/5iilUyY.jpg)
Sent you a PM Yuktsi.Ok, thanks.
Have EU orders started going out yet? :)Yeah. I am updating the tracking now.
Hi Yuktsi, sent you a pm few days ago:)Hi, I didn't receive any email nor PM from you. Do you mind to send it again?
Wait a second Weiss...
I've seen that profile picture somewhere!
is there any chance that the next round being run Yuktsi ?
is there any chance that the next round being run Yuktsi ?
he's mentioned to me that there are some details pending on that possibility
is there any chance that the next round being run Yuktsi ?
he's mentioned to me that there are some details pending on that possibility
A second round would be awesome! Please count me in!
is there any chance that the next round being run Yuktsi ?
he's mentioned to me that there are some details pending on that possibility
A second round would be awesome! Please count me in!
Would technically be a third.
is there any chance that the next round being run Yuktsi ?
he's mentioned to me that there are some details pending on that possibility
A second round would be awesome! Please count me in!
Would technically be a third.
I’m happy with whatever iteration it would be!
are there any tgr 910 ce extras ?
Anyone in Europe got theirs yet? Mine seems to be stuck in UK customs since the 31st :(Mine arrived today. Took a total of 12 days. Went through customs in 2 days though.
What carrier is used? Can't find any tracking with my tracking nr.I put it in the AfterShip tracker and it auto-recognized it. Might work for you as well.
What carrier is used? Can't find any tracking with my tracking nr.I put it in the AfterShip tracker and it auto-recognized it. Might work for you as well.
Mine says Malaysia Post EMS / Pos Laju.What carrier is used? Can't find any tracking with my tracking nr.I put it in the AfterShip tracker and it auto-recognized it. Might work for you as well.
Used that as well, got a list of 25 different carriers and not one of them tracks it.
can anyone tell me if there will be a GB for the 910 ce polycarb or will it not happen ? and is there an estimated time date for the 910 ce polycarb GB ?Yuktsi asked for PM's a while back, so that boat has already sailed unfortunately.
can anyone tell me if there will be a GB for the 910 ce polycarb or will it not happen ? and is there an estimated time date for the 910 ce polycarb GB ?Yuktsi asked for PM's a while back, so that boat has already sailed unfortunately.
Sent from my mobile using Tapatalk
can anyone tell me if there will be a GB for the 910 ce polycarb or will it not happen ? and is there an estimated time date for the 910 ce polycarb GB ?Yuktsi asked for PM's a while back, so that boat has already sailed unfortunately.
Sent from my mobile using Tapatalk
ah so i missed it ? anyone knows how many are made ?
What carrier is used? Can't find any tracking with my tracking nr.Mine was shipped via SF-Express, their tracking is trash though. It always has one of the following problems: tracking server down; can't load captcha; the whole site is down.
Mine arrived today. Took a total of 12 days. Went through customs in 2 days though.Okay thanks, guess I'll wait and pray.
Try 17track.net, that works fine for meWhat carrier is used? Can't find any tracking with my tracking nr.Mine was shipped via SF-Express, their tracking is trash though. It always has one of the following problems: tracking server down; can't load captcha; the whole site is down.Mine arrived today. Took a total of 12 days. Went through customs in 2 days though.Okay thanks, guess I'll wait and pray.
14 days since it was shipped and 11 days since it arrived at UK customs now :(Hmmmm. Will check with SF Malaysia tmr.
I wonder what's going on there, the last time I got something via sf express they called me a day after it landed in the UK.
Thanks14 days since it was shipped and 11 days since it arrived at UK customs now :(Hmmmm. Will check with SF Malaysia tmr.
I wonder what's going on there, the last time I got something via sf express they called me a day after it landed in the UK.
Sent from my iPhone using Tapatalk
Has anyone tried putting holtites into the pcb? Or does know if these will work:
LED – 6-1437514-6
Switch – 8134-HC-8P2
I wanna make sure before ordering a bunch.
Would you guys advise against holtites in the first place? And if so why?
Would you guys advise against holtites in the first place? And if so why?It's cheaper to buy a chinese desoldering station like the ZD-915 than it is to equip 2 boards with holtites and the chinese desoldering station will even work on all of your boards.
Thats a great idea actually, thanks for the recommendation.Would you guys advise against holtites in the first place? And if so why?It's cheaper to buy a chinese desoldering station like the ZD-915 than it is to equip 2 boards with holtites and the chinese desoldering station will even work on all of your boards.
14 days since it was shipped and 11 days since it arrived at UK customs now :(Hmmmm. Will check with SF Malaysia tmr.
I wonder what's going on there, the last time I got something via sf express they called me a day after it landed in the UK.
Sent from my iPhone using Tapatalk
Has anyone tried putting holtites into the pcb? Or does know if these will work:
LED – 6-1437514-6
Switch – 8134-HC-8P2
I wanna make sure before ordering a bunch.
Would you guys advise against holtites in the first place? And if so why?
i always advise against them, i've had nothing but bad experiences with them, and it's faster to just solder switches in and commit instead of being non-committal
Has anyone tried putting holtites into the pcb? Or does know if these will work:
LED – 6-1437514-6
Switch – 8134-HC-8P2
I wanna make sure before ordering a bunch.
Would you guys advise against holtites in the first place? And if so why?
i always advise against them, i've had nothing but bad experiences with them, and it's faster to just solder switches in and commit instead of being non-committal
Give that man some info. Why do you think so? Why do you post a comment without content?
I advise against reading Puddsy's posts at this point.
It's easy to say that Holtites are not the best idea once you have tried a few of them at least. With the way they stick out at the bottom of the PCB after insertion, it's more than likely that movement shock, a small push while assembling, and other possibilities would dislodge a Holtite rather easily. It works for some people, but frankly, it's one of those things that wasn't created to be optimal for the PCBs we work with. I tried some on my Zeal60, where they would arguably fit perfectly. They do fit well, but it was far too easy to take them off. With that kind of stability, I would rather commit to a switch choice and simply desolder when the time comes to make a big change.Has anyone tried putting holtites into the pcb? Or does know if these will work:
LED – 6-1437514-6
Switch – 8134-HC-8P2
I wanna make sure before ordering a bunch.
Would you guys advise against holtites in the first place? And if so why?
i always advise against them, i've had nothing but bad experiences with them, and it's faster to just solder switches in and commit instead of being non-committal
Give that man some info. Why do you think so? Why do you post a comment without content?
I advise against reading Puddsy's posts at this point.
Sent you a PM regarding shipping problems yuktsi
Sent you a PM regarding shipping problems yuktsi
Oh, is yours stuck in the UK too? Mine didn't move since the 31st feelsbadman
Customs clearance was pretty fast, but it seems like my package got rerouted to France.
Oh nice(the customs bit at least), did you get a call from DPD for customs clearance? I got one within one day after it arrived in the UK the last time I got something via SF express, nothing this time though.
tbh I'm starting to lose faith in ever seeing that board :(
Got a SMS from them a day after it landed in London where they asked me to pay the fee. Someone else from Germany has the exact same problem you do. DPD customer service basically told me tho that from their experience it's likely that it won't arrive :(
HOLY ****.
Just got an e-mail from cccollect (the DPD customs thingy) to my paypal email address. Apparently it was already sent on the 4th of april but never arrived? Either way HYPED.
She finally landed.
Will take better pics tomorrow, when there's some sun.
She finally landed.
Will take better pics tomorrow, when there's some sun.
No one cares.
She finally landed.
Will take better pics tomorrow, when there's some sun.
(Attachment Link)
(Attachment Link)
She finally landed.ffffff wow silver's the best
Will take better pics tomorrow, when there's some sun.
(Attachment Link)
(Attachment Link)
She finally landed.
Will take better pics tomorrow, when there's some sun.
(Attachment Link)
(Attachment Link)
nice
nice
that's my line
Crosspost, but fug it
(https://farm1.staticflickr.com/866/26894009177_78b6e664be_z.jpg) (https://flic.kr/p/GYwPXp)
Show ImageCrosspost, but fug it
(https://farm1.staticflickr.com/866/26894009177_78b6e664be_z.jpg) (https://flic.kr/p/GYwPXp)
(https://farm1.staticflickr.com/960/41044390354_d535fcb222_k.jpg) (https://flic.kr/p/25wXehE)
Ahhhhhh finally got it. **** whatever happened at UK customs, but whatever the board is flawless (if a bit dusty lol).great to hear, look forward to pictures
Pics later after I've calmed down.
Just received my 910 poly this morning! Will post pic later after work ^-^:/
(https://media.giphy.com/media/s3Zug4SSIPt6M/giphy.gif)Just received my 910 poly this morning! Will post pic later after work ^-^:/
Just received my 910 poly this morning! Will post pic later after work ^-^
Just received my 910 poly this morning! Will post pic later after work ^-^
god damnShow Image(https://i.imgur.com/nCEOnSt.jpg)Show Image(https://i.imgur.com/ZksecPj.jpg)Show Image(https://i.imgur.com/WiGbP7L.jpg)Show Image(https://i.imgur.com/JPmVi6d.jpg)Show Image(https://i.imgur.com/4MpAe7l.jpg)Show Image(https://i.imgur.com/hX4JnEn.jpg)
Show Image(https://i.imgur.com/nCEOnSt.jpg)Show Image(https://i.imgur.com/ZksecPj.jpg)Show Image(https://i.imgur.com/WiGbP7L.jpg)Show Image(https://i.imgur.com/JPmVi6d.jpg)Show Image(https://i.imgur.com/4MpAe7l.jpg)Show Image(https://i.imgur.com/hX4JnEn.jpg)
Show Image(https://i.imgur.com/nCEOnSt.jpg)Show Image(https://i.imgur.com/ZksecPj.jpg)Show Image(https://i.imgur.com/WiGbP7L.jpg)Show Image(https://i.imgur.com/JPmVi6d.jpg)Show Image(https://i.imgur.com/4MpAe7l.jpg)Show Image(https://i.imgur.com/hX4JnEn.jpg)
Just received my 910 poly this morning! Will post pic later after work ^-^
Just received my 910 poly this morning! Will post pic later after work ^-^
Did yours ship early/are you close? Or is the shipping just super fast?
Yeah, i picked it up myself from yuktsi. One benefit of living close by ^-^Just received my 910 poly this morning! Will post pic later after work ^-^
Did yours ship early/are you close? Or is the shipping just super fast?
They're both in Malaysia.
Very excited for the PC 910 to ship :)
Very excited for the PC 910 to ship :)
woo just got tracking for my 910 PC, however i don't recognize the number. assuming aramex?Yep it's aramex. Make sure to sign up for UPS my choice to get the UPS tracking once it hits their system. This is what I did for my polycarb Singa shipment and it worked perfectly.
Built mine up on Thursday and had some pictures that I wanted to share. The switches were super tight going into the plate but in the end everything worked out fine. Also, anyone have an additional plate that they wanna get rid of by any chance?Show Image(https://i.imgur.com/QXtAdJM.jpg)Show Image(https://i.imgur.com/fxImIyr.jpg)Show Image(https://i.imgur.com/FCWvMy2.jpg)Show Image(https://i.imgur.com/kam6ZTx.jpg)
Built mine up on Thursday and had some pictures that I wanted to share. The switches were super tight going into the plate but in the end everything worked out fine. Also, anyone have an additional plate that they wanna get rid of by any chance?Show Image(https://i.imgur.com/QXtAdJM.jpg)Show Image(https://i.imgur.com/fxImIyr.jpg)Show Image(https://i.imgur.com/FCWvMy2.jpg)Show Image(https://i.imgur.com/kam6ZTx.jpg)
Built mine up on Thursday and had some pictures that I wanted to share. The switches were super tight going into the plate but in the end everything worked out fine. Also, anyone have an additional plate that they wanna get rid of by any chance?Show Image(https://i.imgur.com/QXtAdJM.jpg)Show Image(https://i.imgur.com/fxImIyr.jpg)Show Image(https://i.imgur.com/FCWvMy2.jpg)Show Image(https://i.imgur.com/kam6ZTx.jpg)
What switches?
And your "2" key isn't all the way on.
I got mine last week. My PCB came with the RGB SMDs unsoldered? I wasn't aware that we have to solder them.I remember getting an email from yuktsi awhile ago saying they'd come separate and he'd solder them on for you if you requested it. I requested it but never got a response so fingers crossed!
****, I missed that one :)I got mine last week. My PCB came with the RGB SMDs unsoldered? I wasn't aware that we have to solder them.I remember getting an email from yuktsi awhile ago saying they'd come separate and he'd solder them on for you if you requested it. I requested it but never got a response so fingers crossed!
looks so very nice polycarbon! how can I get TGR910re??
Was there any GB???how much is it?
****, I missed that one :)I got mine last week. My PCB came with the RGB SMDs unsoldered? I wasn't aware that we have to solder them.I remember getting an email from yuktsi awhile ago saying they'd come separate and he'd solder them on for you if you requested it. I requested it but never got a response so fingers crossed!
****, I missed that one :)I got mine last week. My PCB came with the RGB SMDs unsoldered? I wasn't aware that we have to solder them.I remember getting an email from yuktsi awhile ago saying they'd come separate and he'd solder them on for you if you requested it. I requested it but never got a response so fingers crossed!
Abit late to the party. Love how the Grey turn outShow Image(https://uploads.tapatalk-cdn.com/20180605/ce7259056c5d56d4f671ff8de320713b.jpg)
Sent from my Pixel using Tapatalk
heh I'm the 0.01% :D :D
heh I'm the 0.01% :D :D
same here (if the PC version counts, that is)
Mine got a bit funky when it was closer to me, said would be delivered then 2 days later it arrived then 3 days after that the mail service who handled it in Aus phoned me to make sure it arrived.Show Image(https://i.imgur.com/U5zKhvX.png)
aramex wtf u doing m8
edit: apparently movin fast, just got UPS email that it should be here tomorrow
Where did everybody get their tracking number from?
Where did everybody get their tracking number from?
My shipping invoice was updated with the tracking number
Mine is still stuck at "record created" since June 3rd.
Not sure the carrier picked it up yet.
Show Image(https://i.imgur.com/Scaj72A.png)
Looks like I jinxed it. Scheduled delivery was for the 12th, that came and went with no keyboard, and tracking hasn't updated since the 9th.
Patience is a virtue I guess.
A bit late to the party myself, and I know it doesn't totally fit in, but I finally got my build finished. Thanks again for the measurements, Yuktsi.
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
A bit late to the party myself, and I know it doesn't totally fit in, but I finally got my build finished. Thanks again for the measurements, Yuktsi. Weights are cast bismuth, for those wondering.
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
any plan for R2 of this ?
any plan for R2 of this ?
doubt it
A bit late to the party myself, and I know it doesn't totally fit in, but I finally got my build finished. Thanks again for the measurements, Yuktsi. Weights are cast bismuth, for those wondering.
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
what cerakote color is that?
A bit late to the party myself, and I know it doesn't totally fit in, but I finally got my build finished. Thanks again for the measurements, Yuktsi. Weights are cast bismuth, for those wondering.
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
what cerakote color is that?
light grey (not cerakoted by yuktsi, done at a shop in northern virginia)
Show Image(https://i.imgur.com/Scaj72A.png)
Looks like I jinxed it. Scheduled delivery was for the 12th, that came and went with no keyboard, and tracking hasn't updated since the 9th.
Patience is a virtue I guess.
i read in the IC that there probably wont be a r2, is that true?
i read in the IC that there probably wont be a r2, is that true?
correct
65te (the next version) will run on typemachina, but will be different to 910
i read in the IC that there probably wont be a r2, is that true?
correct
65te (the next version) will run on typemachina, but will be different to 910
Gotcha..is there a thread on it or is it just in the talks right now? dont really see anything about it
i read in the IC that there probably wont be a r2, is that true?
correct
65te (the next version) will run on typemachina, but will be different to 910
Gotcha..is there a thread on it or is it just in the talks right now? dont really see anything about it
there's a thing for it on the typemachina site, but it's not really public knowledge yet
nothing is known about it really
i read in the IC that there probably wont be a r2, is that true?
correct
65te (the next version) will run on typemachina, but will be different to 910
Gotcha..is there a thread on it or is it just in the talks right now? dont really see anything about it
there's a thing for it on the typemachina site, but it's not really public knowledge yet
nothing is known about it really
i read in the IC that there probably wont be a r2, is that true?
correct
65te (the next version) will run on typemachina, but will be different to 910
Gotcha..is there a thread on it or is it just in the talks right now? dont really see anything about it
there's a thing for it on the typemachina site, but it's not really public knowledge yet
nothing is known about it really
I stumbled upon that site accidentally a few weeks ago while Googling around for the poly 910. What a mysterious site.
https://www.typemachina.comi read in the IC that there probably wont be a r2, is that true?
correct
65te (the next version) will run on typemachina, but will be different to 910
Gotcha..is there a thread on it or is it just in the talks right now? dont really see anything about it
there's a thing for it on the typemachina site, but it's not really public knowledge yet
nothing is known about it really
I stumbled upon that site accidentally a few weeks ago while Googling around for the poly 910. What a mysterious site.
i've been looking for that site..can't seem to find..?
https://www.typemachina.comi read in the IC that there probably wont be a r2, is that true?
correct
65te (the next version) will run on typemachina, but will be different to 910
Gotcha..is there a thread on it or is it just in the talks right now? dont really see anything about it
there's a thing for it on the typemachina site, but it's not really public knowledge yet
nothing is known about it really
I stumbled upon that site accidentally a few weeks ago while Googling around for the poly 910. What a mysterious site.
i've been looking for that site..can't seem to find..?
A bit late to the party myself, and I know it doesn't totally fit in, but I finally got my build finished. Thanks again for the measurements, Yuktsi. Weights are cast bismuth, for those wondering.
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
what cerakote color is that?
light grey (not cerakoted by yuktsi, done at a shop in northern virginia)
nice, I want to try it!
could you tell me the color code please?
https://www.typemachina.comi read in the IC that there probably wont be a r2, is that true?
correct
65te (the next version) will run on typemachina, but will be different to 910
Gotcha..is there a thread on it or is it just in the talks right now? dont really see anything about it
there's a thing for it on the typemachina site, but it's not really public knowledge yet
nothing is known about it really
I stumbled upon that site accidentally a few weeks ago while Googling around for the poly 910. What a mysterious site.
i've been looking for that site..can't seem to find..?
what...that never showed up for me... :'( ty
https://www.typemachina.comi read in the IC that there probably wont be a r2, is that true?
correct
65te (the next version) will run on typemachina, but will be different to 910
Gotcha..is there a thread on it or is it just in the talks right now? dont really see anything about it
there's a thing for it on the typemachina site, but it's not really public knowledge yet
nothing is known about it really
I stumbled upon that site accidentally a few weeks ago while Googling around for the poly 910. What a mysterious site.
i've been looking for that site..can't seem to find..?
what...that never showed up for me... :'( ty
it's not registered on google since it's still under construction
must have been updated thenMoreBut I found it on Google.https://www.typemachina.comi read in the IC that there probably wont be a r2, is that true?
correct
65te (the next version) will run on typemachina, but will be different to 910
Gotcha..is there a thread on it or is it just in the talks right now? dont really see anything about it
there's a thing for it on the typemachina site, but it's not really public knowledge yet
nothing is known about it really
I stumbled upon that site accidentally a few weeks ago while Googling around for the poly 910. What a mysterious site.
i've been looking for that site..can't seem to find..?
what...that never showed up for me... :'( ty
it's not registered on google since it's still under construction
must have been updated thenMoreBut I found it on Google.https://www.typemachina.comi read in the IC that there probably wont be a r2, is that true?
correct
65te (the next version) will run on typemachina, but will be different to 910
Gotcha..is there a thread on it or is it just in the talks right now? dont really see anything about it
there's a thing for it on the typemachina site, but it's not really public knowledge yet
nothing is known about it really
I stumbled upon that site accidentally a few weeks ago while Googling around for the poly 910. What a mysterious site.
i've been looking for that site..can't seem to find..?
what...that never showed up for me... :'( ty
it's not registered on google since it's still under construction
i didn't look
must have been updated thenMoreBut I found it on Google.https://www.typemachina.comi read in the IC that there probably wont be a r2, is that true?
correct
65te (the next version) will run on typemachina, but will be different to 910
Gotcha..is there a thread on it or is it just in the talks right now? dont really see anything about it
there's a thing for it on the typemachina site, but it's not really public knowledge yet
nothing is known about it really
I stumbled upon that site accidentally a few weeks ago while Googling around for the poly 910. What a mysterious site.
i've been looking for that site..can't seem to find..?
what...that never showed up for me... :'( ty
it's not registered on google since it's still under construction
i didn't look
could be. last time i saw a reference to the site was a few months ago. thought it was some super secret website lol
Mine hasn’t even shipped as of today. I sent yuktsi a PM a few days ago, but haven’t heard back from him. Maybe he’s still having finals, I don’t know. But I’d like to get mine soon or at least get a statement when he’s going to ship it.
I want to add SMD leds to my tgr 910 pcb. How do I go about doing this? Can I just salvage an ATTiny85 controller from another board and solder that in?
RGB LEDs on the bottom and also for the logoI want to add SMD leds to my tgr 910 pcb. How do I go about doing this? Can I just salvage an ATTiny85 controller from another board and solder that in?
as in RGB LEDs on the bottom or in-switch?
Attiny85 from any ps2avrGB PCB should work with the 910RGB LEDs on the bottom and also for the logoI want to add SMD leds to my tgr 910 pcb. How do I go about doing this? Can I just salvage an ATTiny85 controller from another board and solder that in?
as in RGB LEDs on the bottom or in-switch?
I'm just not sure if the attiny85 has to be flashed with a firmware that is specifically for the tgr 910
That looks very cool. Patiently wating for mine.Show Image(https://i.imgur.com/i3vqYfy.jpg)Show Image(https://i.imgur.com/dfGjeiP.jpg)
Arrived safe and sound :)
can you update some news about the PC version :) ?Attiny85 from any ps2avrGB PCB should work with the 910RGB LEDs on the bottom and also for the logoI want to add SMD leds to my tgr 910 pcb. How do I go about doing this? Can I just salvage an ATTiny85 controller from another board and solder that in?
as in RGB LEDs on the bottom or in-switch?
I'm just not sure if the attiny85 has to be flashed with a firmware that is specifically for the tgr 910
anyone know how/where i can get a polycarb plate made for this
Some one sell me one of these lol
x-post so sorry.Show Image(https://i.imgur.com/SZtVF27.jpg)Show Image(https://i.imgur.com/O5HI8KR.jpg)Show Image(https://i.imgur.com/haMCJKv.jpg)
Is there going to be another round?
Which carrier did yuktsi use for your PC 910? While I have a tracking number, AfterShip recognizes it as Canadian Post, which doesn‘t seem to be correct.
Any one have any issues with the TGR-Elaine pcb having a entire row not work?
TGR-Elaine is the Singa PCB.Any one have any issues with the TGR-Elaine pcb having a entire row not work?
What's the TGR Elaine?
Does anyone know if the TGR 910 VKC edition is supposed to be numbered on the weight?
Does anyone know if the TGR 910 VKC edition is supposed to be numbered on the weight?
yuktsi might.
Hey, I'm from R1. While desoldering and resoldering I found that 1 column didn't seem to work (tested with a multimeter), so I was wondering if there was any ways to get an additional pcb that would be compatible with the TGR910?
Hey, I'm from R1. While desoldering and resoldering I found that 1 column didn't seem to work (tested with a multimeter), so I was wondering if there was any ways to get an additional pcb that would be compatible with the TGR910?
Message Kawasaki161 . he can help you.
Hey, I'm from R1. While desoldering and resoldering I found that 1 column didn't seem to work (tested with a multimeter), so I was wondering if there was any ways to get an additional pcb that would be compatible with the TGR910?
Message Kawasaki161 . he can help you.
Thank you, just sent him a pm.
Anyone have a extra RGB kit? Or two?I didn't get the RGB kit but looking for anyone to confirm these are electronics for the RGB kit?
Sent from my Pixel 2 XL using Tapatalk
Anyone have a extra RGB kit? Or two?I didn't get the RGB kit but looking for anyone to confirm these are electronics for the RGB kit?
Sent from my Pixel 2 XL using Tapatalk
WS2812B - https://www.sparkfun.com/products/13667
WS2811 - https://www.adafruit.com/product/1378?gclid=CjwKCAjwh9_bBRA_EiwApObaOGsoHfbmq2gEJ308n8FYckjsXerAr6hrP98MvDDzQM1l1AnkQQ2UdxoC-6gQAvD_BwE
Don't really care about the spacer. Just want the 910 lit up.
Anyone mess with cerakoting as well? Looking to do it to mine sometime in the near future.
Edit: Anyone have the 910 plate file?
Just a thought, does anyone know if there's a key combination to flash the PCB for the 910? Mines having issues and won't be recognized by the PC/BootmapperPMed
Hey all, looking for some help building my board. First time I’m building and no clue what to do/how to install the rgb kit. I don’t even know where to start. Any help would be greatly appreciated.
Hey all, looking for some help building my board. First time I’m building and no clue what to do/how to install the rgb kit. I don’t even know where to start. Any help would be greatly appreciated.
Hey bud, The RGB kit is optional - just in case you were not aware. If you do want to install it you will want to start with the RGB controller, its a little black square that looks like a spider - If you are comfortable doing SMD work you can try to do that than move on to the LED's
Thank you! Yea I ordered the rgb kit so I do have that. What is the black rubber strip for? The one that looks like several blocks chained together?
Assuming I install that, then I would need to install leds individually for each cap?Hey all, looking for some help building my board. First time I’m building and no clue what to do/how to install the rgb kit. I don’t even know where to start. Any help would be greatly appreciated.
Hey bud, The RGB kit is optional - just in case you were not aware. If you do want to install it you will want to start with the RGB controller, its a little black square that looks like a spider - If you are comfortable doing SMD work you can try to do that than move on to the LED's
Thank you! Yea I ordered the rgb kit so I do have that. What is the black rubber strip for? The one that looks like several blocks chained together?
Assuming I install that, then I would need to install leds individually for each cap?Hey all, looking for some help building my board. First time I’m building and no clue what to do/how to install the rgb kit. I don’t even know where to start. Any help would be greatly appreciated.
Hey bud, The RGB kit is optional - just in case you were not aware. If you do want to install it you will want to start with the RGB controller, its a little black square that looks like a spider - If you are comfortable doing SMD work you can try to do that than move on to the LED's
Thank you! Yea I ordered the rgb kit so I do have that. What is the black rubber strip for? The one that looks like several blocks chained together?
Assuming I install that, then I would need to install leds individually for each cap?Hey all, looking for some help building my board. First time I’m building and no clue what to do/how to install the rgb kit. I don’t even know where to start. Any help would be greatly appreciated.
Hey bud, The RGB kit is optional - just in case you were not aware. If you do want to install it you will want to start with the RGB controller, its a little black square that looks like a spider - If you are comfortable doing SMD work you can try to do that than move on to the LED's
the rgb kit is for underglow not caps
Gotcha. Thank you. And that underglow light is provided by?
Thank you! Yea I ordered the rgb kit so I do have that. What is the black rubber strip for? The one that looks like several blocks chained together?
Assuming I install that, then I would need to install leds individually for each cap?Hey all, looking for some help building my board. First time I’m building and no clue what to do/how to install the rgb kit. I don’t even know where to start. Any help would be greatly appreciated.
Hey bud, The RGB kit is optional - just in case you were not aware. If you do want to install it you will want to start with the RGB controller, its a little black square that looks like a spider - If you are comfortable doing SMD work you can try to do that than move on to the LED's
the rgb kit is for underglow not caps
Gotcha. Thank you. And that underglow light is provided by?
Thank you! Yea I ordered the rgb kit so I do have that. What is the black rubber strip for? The one that looks like several blocks chained together?
Assuming I install that, then I would need to install leds individually for each cap?Hey all, looking for some help building my board. First time I’m building and no clue what to do/how to install the rgb kit. I don’t even know where to start. Any help would be greatly appreciated.
Hey bud, The RGB kit is optional - just in case you were not aware. If you do want to install it you will want to start with the RGB controller, its a little black square that looks like a spider - If you are comfortable doing SMD work you can try to do that than move on to the LED's
the rgb kit is for underglow not caps
rgb leds that you have to solder on to the bottom of the pcb and the diffuser that comes with the rgb kit
if the original buyer didn't order the rgb kit, there is no diffuser
Thanks. I am the original buyer and have the diffuser. So at this point I just need to buy some leds correct? Any recommendations? Thanks for the help!Gotcha. Thank you. And that underglow light is provided by?
Thank you! Yea I ordered the rgb kit so I do have that. What is the black rubber strip for? The one that looks like several blocks chained together?
Assuming I install that, then I would need to install leds individually for each cap?Hey all, looking for some help building my board. First time I’m building and no clue what to do/how to install the rgb kit. I don’t even know where to start. Any help would be greatly appreciated.
Hey bud, The RGB kit is optional - just in case you were not aware. If you do want to install it you will want to start with the RGB controller, its a little black square that looks like a spider - If you are comfortable doing SMD work you can try to do that than move on to the LED's
the rgb kit is for underglow not caps
rgb leds that you have to solder on to the bottom of the pcb and the diffuser that comes with the rgb kit
if the original buyer didn't order the rgb kit, there is no diffuser
Thanks. I am the original buyer and have the diffuser. So at this point I just need to buy some leds correct? Any recommendations? Thanks for the help!Gotcha. Thank you. And that underglow light is provided by?
Thank you! Yea I ordered the rgb kit so I do have that. What is the black rubber strip for? The one that looks like several blocks chained together?
Assuming I install that, then I would need to install leds individually for each cap?Hey all, looking for some help building my board. First time I’m building and no clue what to do/how to install the rgb kit. I don’t even know where to start. Any help would be greatly appreciated.
Hey bud, The RGB kit is optional - just in case you were not aware. If you do want to install it you will want to start with the RGB controller, its a little black square that looks like a spider - If you are comfortable doing SMD work you can try to do that than move on to the LED's
the rgb kit is for underglow not caps
rgb leds that you have to solder on to the bottom of the pcb and the diffuser that comes with the rgb kit
if the original buyer didn't order the rgb kit, there is no diffuser
and a rgb controller chip
im not sure of part no but i think it's in the op
Is there any way to buy an additional brass logo insert for the top right corner of the 910 polycarbonate? Does anyone have an extra one they are willing to sell?I will be sending one with dantambok's stuff for you. <3
Is there any way to buy an additional brass logo insert for the top right corner of the 910 polycarbonate? Does anyone have an extra one they are willing to sell?I will be sending one with dantambok's stuff for you. <3
tgr 910 v2
Sent from my iPhone using Tapatalk
tgr 910 v2
Sent from my iPhone using Tapatalk
wat
tgr 910 v2
Sent from my iPhone using Tapatalk
wat
Prime example of a polite way to request an R2 lol
Is this ever going to run again?Highly unlikely, but I have been proven wrong. Your best bet would be aftermarket. Good luck!
Is this ever going to run again?
910 CE has now been ported to QMK =)
https://config.qmk.fm/#/tgr/910ce/LAYOUT_65_ansi_blocker
VIA support coming shortly!
Is this for the quadcube PCB?It's this PCB:
Also, is this the same PCB as R2 RE?