Author Topic: [IC] TGR 910 PCBs and Plates  (Read 45028 times)

0 Members and 1 Guest are viewing this topic.

Offline reconsiderit

  • Thread Starter
  • Posts: 546
  • Location: Sunnyvale, CA
  • I'm actually not left handed www.switchplate.co
[IC] TGR 910 PCBs and Plates
« on: Tue, 06 August 2019, 02:43:17 »
Replacement PCBs and Plates for the TGR 910

Interest Check form here:  https://forms.gle/6Z3CcviLrx89w52h7

I’m planning to run a small GB for TGR 910 PCBs and plates in a few weeks time. They should be compatible with all models of the 910 (OG, SE, CE, RE, etc…).

PCB designed by kacklappen23. QMK Firmware with support for the layouts in the diagram below. It supports all layouts found on the original 910 plate and PCB save for ISO and split shift. PCB also features horizontal and vertical relief cuts taken from the PCB design of OTD keyboards.

Plate is designed by me with the outline taken from the original 910 plate. Will edit for compatibility based on IC response before the GB.

PCBs will have an MOQ of 20 with a price break at 50. Production time will be around 1-2 months.











« Last Edit: Thu, 22 August 2019, 03:33:40 by reconsiderit »
Southpaw 65 || Southpaw Full Size || Trinity XT TKL || TGR Jane V2 || TGR 910 RE || Duck Jetfire || Matrix Lab 1.2 OG || Jubi || Lunar || Lunar II || g80-1800 HEU

switchplate.co

Offline itsundone

  • Posts: 65
  • Location: ID
Re: [IC] TGR 910 PCBs and Plates
« Reply #1 on: Tue, 06 August 2019, 02:49:45 »
Neat

can I add the case for an add-on? ;D

Offline PikaJoyce

  • Posts: 131
Re: [IC] TGR 910 PCBs and Plates
« Reply #2 on: Tue, 06 August 2019, 02:50:42 »
Neat

can I add the case for an add-on? ;D
LOL this.

Offline kevinplus

  • Posts: 12
Re: [IC] TGR 910 PCBs and Plates
« Reply #3 on: Tue, 06 August 2019, 02:59:33 »
nice

Offline vonswoopington

  • Posts: 187
Re: [IC] TGR 910 PCBs and Plates
« Reply #4 on: Tue, 06 August 2019, 03:07:18 »
I'm in!
TGR 910 Polycarb | TGR Alice | TGR Unikorn | Lyn EM-7 | VE.A | Kyuu | E7-V1

Offline lamenthe

  • Posts: 34
Re: [IC] TGR 910 PCBs and Plates
« Reply #5 on: Tue, 06 August 2019, 04:26:27 »
This could not have come at a better time. I just purchased a 910 in the aftermarket. Hoping to have some options in the future if the PCB craps out.

What are the chances for a brass plate? Also, as a PCB noob - are there certain benefits to having a 1.6 vs 1.2mm PCB thickness?
« Last Edit: Tue, 06 August 2019, 04:31:27 by lamenthe »

Offline TheArcticFox_27

  • Posts: 50
Re: [IC] TGR 910 PCBs and Plates
« Reply #6 on: Tue, 06 August 2019, 04:47:07 »
Def in for a pcb!
| | |

Offline LightningXI

  • * Elevated Elder
  • Posts: 4280
  • Location: New York
  • PPD
    • ArtisanMacro
Re: [IC] TGR 910 PCBs and Plates
« Reply #7 on: Tue, 06 August 2019, 07:02:19 »
Would be in for a couple of each. Would also like to suggest both 6.25u and 7u support. And good ol' aluminum plates. A single fixed color is fine. Like red, or grey, or black.

Offline Slash Emperor

  • Posts: 461
  • Location: Boston, MA
  • Lust for life lost, keyboards acquired.
Re: [IC] TGR 910 PCBs and Plates
« Reply #8 on: Tue, 06 August 2019, 08:35:33 »
I'd definitely love to pick up a couple PCBs. Got some plates coming in from Project Keyboard, but no PCBs to use with them, this would be perfect.

Offline Mcnos

  • Posts: 1279
    • GMK Fuyu
Re: [IC] TGR 910 PCBs and Plates
« Reply #9 on: Tue, 06 August 2019, 08:48:10 »
I'm in.

Is there support for blocker led as I prefer a frosted insert than the brass. Call me a Razer fanboi

Offline romevi

  • Formerly romevi
  • * Exalted Elder
  • Posts: 8941
  • Location: The Windy City
Re: [IC] TGR 910 PCBs and Plates
« Reply #10 on: Tue, 06 August 2019, 09:07:12 »
In.

Offline mdlt97

  • Posts: 104
  • Location: Toronto
  • This **** is still better than Keebtalk
Re: [IC] TGR 910 PCBs and Plates
« Reply #11 on: Tue, 06 August 2019, 10:23:21 »
damn no brass  :-[
TX60 | Duck TC-V3 | Duck Eagle V2 1/1 Bottom | Zephyr r2 | Duck Sidewinder | Mech27v2 | TX75 | LZ CLS | Duck Viper v2 | Orion v3 | HHKB pro 1 | TGR 910 | Omega60

Offline whitty

  • Formerly dsw_408
  • Posts: 105
[IC] TGR 910 PCBs and Plates
« Reply #12 on: Tue, 06 August 2019, 11:01:41 »
I’m in

+1 for aluminum plate option


Sent from my iPhone using Tapatalk
« Last Edit: Tue, 06 August 2019, 11:27:32 by dsw_408 »

Offline dallman5

  • Posts: 428
  • Location: DC, USA
Re: [IC] TGR 910 PCBs and Plates
« Reply #13 on: Tue, 06 August 2019, 11:21:05 »
Filled out the form, though I’d like an option for aluminum if that’s possible.
LF: OG Cherry APL (lasered), Artisans

Current collection:
More
Norbatouch (Galaxy Blue) | Mira SE (Lunar Grey, WKL) | HHKB Pro 1 (KB300BN) | Noxary X60 (Grey, HHKB) | KBDFans 5 Degree (Silver) | AEK64 (Grey) | Norbaforce (Tactical Black, WKL)) | Realforce 86U (White) | TGR 910 RE (Polycarbonate) | LZ-SQ (Black) | LZ-CLS (Grey, WKL) | Duck Orion v1 (Silver, WK)) | Nissho KB106DE | HHKB Pro 1 (KB300B) | LZ CLS-S (Blue, Poker) | Realforce 87U 10th Anniversary) | Realforce 104UK | TGR Alice (Grey on Pink) | Singa (Blue, WKL)  | Quantrik QXP (Blue Grey, WKL) | LZ-GH v2 (Black, WK) | KMAC Happy (Red, Poker)) | IBM Model M SSK (APL) | TGR 910 SE (Pink on Blue) | GSKT-00 (Silver, Poker) | OTD Koala (Silver, WKL) | Realforce R2 PFU Edition (Ivory) | IBM 3279 Beamspring (APL) | TGR Tris (Blue) | LZ-GH v2 (Blue, WKL)) | TGR Jane v2 (Blue-grey, WKL) | LZ-MP (Shine Grey, WKL)  | TGR x Singa Unikorn (Purple) | Justsystems x Realforce 108UG) | IBM Model F Unsaver (APL) | TGR Jane V2 CE (Multicolor, WKL) | Realforce 87U (Blank Black) | Lin Montage (Light Blue, WKL) | GSKT-00 AEK R2 (Grey, HHKB) | Leopold FC660C (Blank Black) | Duck Viper v3 (Grey on Black) | Rama Works M6-C RWxRW | LZ-GH v1 (Black, WKL) | Gok 7v (Grey) | biso x beaming Kei (SS, HHKB) | zacheadams x bisoromi little z | Matrix Noah (Silver/Grey, WKL) | Lin Whale (Pink, WKL) | TGR Alice (Polycarbonate) | Rama Kara (Noct) | Lin Whale75 (Burgundy, F13) | Realforce 89 (Ivory) | Hand Engineering Haus (Bluegrey) | Haytco CAKE60_R1 (Pantone 4167C) | LZ-XE (Grey, WKL) | Noxary X60 V2 (Grey, WK) | Daji Ochocuatro (Grey, WKL) | HHKB Hybird Type-S 25th Anniversary (Snow) | LZ-REs (Grey, WKL) | Matrix 8xv 3.0 (Blue-Black/Deep Grey, WKL) | Realforce 23UB | Biso RS60 (Black, WK) | TGR x MXF Koala (Grey/Black, WKL)

Italics = Incoming, Black = Gone

Offline evorus5

  • Posts: 57
  • Location: San Fernando, California
Re: [IC] TGR 910 PCBs and Plates
« Reply #14 on: Tue, 06 August 2019, 21:50:55 »
Actually, would you ever consider doing another run of the 910?
Just got into this hobby and would love to pick up a 910 PC version.
Thank you!


Offline LightningXI

  • * Elevated Elder
  • Posts: 4280
  • Location: New York
  • PPD
    • ArtisanMacro
Re: [IC] TGR 910 PCBs and Plates
« Reply #15 on: Tue, 06 August 2019, 21:54:17 »
Actually, would you ever consider doing another run of the 910?
Just got into this hobby and would love to pick up a 910 PC version.
Thank you!

The OP does not produce the cases. Only TGR Keyboards does.


Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 12275
  • Location: RSTLN E
  • "Do you shovel to survive, or survive to shovel?"
Re: [IC] TGR 910 PCBs and Plates
« Reply #16 on: Tue, 06 August 2019, 22:44:22 »
Actually, would you ever consider doing another run of the 910?
Just got into this hobby and would love to pick up a 910 PC version.
Thank you!

The OP does not produce the cases. Only TGR Keyboards does.

TGR = yuktsi

bother him

but he said he won't, so you'll be doing a lot of bothering
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | ctrl.alt x GON 60% | TGR Alice | Mira SE #29 | Mira SE #34 | Revo One | z | Keycult No. 1 | AIS65 | First CW87 prototype | Mech27v1 | Camp C225 | Duck Orion V1 | LZ CLS sxh | Geon Frog TKL | Hiney TKL One | Geon Glare TKL



"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos, after I came back from a break | "Is Linkshine our Nixon?" -NAV | "Puddsy is the Puddsy of keebs" -ns90

Offline lamenthe

  • Posts: 34
Re: [IC] TGR 910 PCBs and Plates
« Reply #17 on: Tue, 06 August 2019, 23:40:09 »
Just received my glorious TGR 910 in the mail... and it has a bum PCB. This now HAS to happen. If we're on the button for MOQ, just PM me.

Also another +1 for aluminum or brass options for plate.

Offline reconsiderit

  • Thread Starter
  • Posts: 546
  • Location: Sunnyvale, CA
  • I'm actually not left handed www.switchplate.co
Re: [IC] TGR 910 PCBs and Plates
« Reply #18 on: Tue, 06 August 2019, 23:52:43 »
Just put this up yesterday (I think) and interest looks good enough to start on the PCB side of things.

Though the PCB is a variant of one that has been produced and tested, I'll be ordering a sample before doing a production run to make sure that it works.

Also seems like there's some interest in Alu/Brass plates. I'm trying to keep the number of options down to get to a somewhat decent qty so that pricing is reasonable.

As a point of reference, PC plates will be $30-40 each at 10qty. Alu will most likely be a little more.

Edit: Right now, looking at the responses, I'm thinking of doing alu and poly plates with support for both 6.25 and 7u space with combo BS. PCB with in 1.2mm with a matte black soldermask.
« Last Edit: Tue, 06 August 2019, 23:55:05 by reconsiderit »
Southpaw 65 || Southpaw Full Size || Trinity XT TKL || TGR Jane V2 || TGR 910 RE || Duck Jetfire || Matrix Lab 1.2 OG || Jubi || Lunar || Lunar II || g80-1800 HEU

switchplate.co

Offline reconsiderit

  • Thread Starter
  • Posts: 546
  • Location: Sunnyvale, CA
  • I'm actually not left handed www.switchplate.co
Re: [IC] TGR 910 PCBs and Plates
« Reply #19 on: Wed, 07 August 2019, 00:00:00 »
I'm in.

Is there support for blocker led as I prefer a frosted insert than the brass. Call me a Razer fanboi

PCB will not have support for blocker LED unfortunately
Southpaw 65 || Southpaw Full Size || Trinity XT TKL || TGR Jane V2 || TGR 910 RE || Duck Jetfire || Matrix Lab 1.2 OG || Jubi || Lunar || Lunar II || g80-1800 HEU

switchplate.co

Offline lamenthe

  • Posts: 34
Re: [IC] TGR 910 PCBs and Plates
« Reply #20 on: Wed, 07 August 2019, 01:57:02 »
Re: Alu plate - thanks reconsiderit, that would be amazing.

Brass plate people keep speaking up!

Offline Sissy

  • Posts: 494
  • Location: Australia
Re: [IC] TGR 910 PCBs and Plates
« Reply #21 on: Wed, 07 August 2019, 01:58:38 »
I'm in.

Is there support for blocker led as I prefer a frosted insert than the brass. Call me a Razer fanboi

PCB will not have support for blocker LED unfortunately
damn.

Offline kawasaki161

  • Posts: 1059
  • Location: Germany
Re: [IC] TGR 910 PCBs and Plates
« Reply #22 on: Wed, 07 August 2019, 05:30:08 »
Haven't even thought about a blocker LED, since the plan was to keep the PCB as clean as possible.

Would you guys be more interested in a RGB LED or in a solid color one?

Offline Sissy

  • Posts: 494
  • Location: Australia
Re: [IC] TGR 910 PCBs and Plates
« Reply #23 on: Wed, 07 August 2019, 05:52:23 »
Haven't even thought about a blocker LED, since the plan was to keep the PCB as clean as possible.

Would you guys be more interested in a RGB LED or in a solid color one?
I like to change my LED with the keysets I use so RGB preferred.
Other than that underglow might also be worth considering for people who have the difuser/acrylic case.

Offline vtachkov

  • Posts: 205
Re: [IC] TGR 910 PCBs and Plates
« Reply #24 on: Wed, 07 August 2019, 09:22:05 »
Haven't even thought about a blocker LED, since the plan was to keep the PCB as clean as possible.

Would you guys be more interested in a RGB LED or in a solid color one?
I like to change my LED with the keysets I use so RGB preferred.
Other than that underglow might also be worth considering for people who have the difuser/acrylic case.

+1 for the RGB LEDs.

Offline romevi

  • Formerly romevi
  • * Exalted Elder
  • Posts: 8941
  • Location: The Windy City
Re: [IC] TGR 910 PCBs and Plates
« Reply #25 on: Wed, 07 August 2019, 09:40:56 »
RGB LEDs under the PCB for sure. I thought the original PCBs had those too, no?

I'm fine with no LED in the blocker. I don't think people use that one anyway, or if they do not as many as the under LEDs.

Offline dantambok

  • Posts: 963
  • Location: Goutland
Re: [IC] TGR 910 PCBs and Plates
« Reply #26 on: Wed, 07 August 2019, 09:52:18 »
those relief cuts look very interesting!
Stuff  I have
More
2x TGR Alice / TGR 910 RE / TGR 910 CE / TGR 910 VKC / 2x TGR Jane V2 / 2x Matrix 2.0 / Matrix 2.2 / Matrix 1.2OG / Lyn Whale v2 / Lyn EM7 v3 / DK Saver / Keycult No. 1/60 /  Quantrik Hachi /  Quantrik  Kyuu / Duck Orion V2 / TGRxSinga Unikorn R1 / 2x Unikorn 2.2 / Quantrik QXP /  JER80 / TMO50 / 2x 86u / ION i69 / LZ MP / 2x FMJ80 / TGR Jane V2 CE / Matrix Project F / IDB60 / is0  / MXSS / Atom TKL / Duck Viper v3 / HBCP / Noxary 280 / LZ Physix / FLX Virgo / Modern M0110 / Matrix 2.0 ADD / TGR Police / Noxary XRF / Noxary Vulcan Pro / 350 Mimi / Matrix 2.0CP / Kira80 / Exent 65% / FMJ60 / Haus 65 / Kikuichimonji / Cake 60 / 2x AU Unikorn  Commission/ LZ XE / Paraluman 60 / AI03 Andromeda / Dalco 959 Mini GT / LZ Erghost /  Finder Works Hyphen / 2x Singa Kohaku / Linworks EM8 / GAFxTGR 910 / TGRxKLC Dolice / TGR 910v2 ME / Noxary Valhalla / Hiney Ibis / LZ REs / PerryWorks MC65 / Hiney Poly TKL One / RS60 / Zekk RBB / QK80 / Keycult No 2 TKL / FLX Virgo r2 / Matrix Navi

Coming --   Lynx50 (wixx scammed us) / Ladybird60 / JJW Derivative / TGR Shi

100+ GMK sets


Offline Traveler

  • Posts: 280
Re: [IC] TGR 910 PCBs and Plates
« Reply #27 on: Wed, 07 August 2019, 15:09:47 »
If the PCB has underglow LEDs I'm defintiely in. Without it I'm a bit on the fence; it'll probably come down to the price.

Offline dead_pixel_design

  • Posts: 623
  • Location: Portland, OR
  • IIIV is not a Roman Numeral. Positive Vibes.
Re: [IC] TGR 910 PCBs and Plates
« Reply #28 on: Wed, 07 August 2019, 15:25:06 »
Here for Exent, my understanding is these PCB's might fit...? Hoping someone might be able to confirm

Offline romevi

  • Formerly romevi
  • * Exalted Elder
  • Posts: 8941
  • Location: The Windy City
Re: [IC] TGR 910 PCBs and Plates
« Reply #29 on: Wed, 07 August 2019, 15:27:29 »
Here for Exent, my understanding is these PCB's might fit...? Hoping someone might be able to confirm

From what I understand, the original Exent and 910 PCBs are interchangeable. (My 910 currently has a black Exent PCB.)

Not sure whether these will be.

Offline reconsiderit

  • Thread Starter
  • Posts: 546
  • Location: Sunnyvale, CA
  • I'm actually not left handed www.switchplate.co
Re: [IC] TGR 910 PCBs and Plates
« Reply #30 on: Thu, 08 August 2019, 03:44:44 »
Here for Exent, my understanding is these PCB's might fit...? Hoping someone might be able to confirm

From what I understand, the original Exent and 910 PCBs are interchangeable. (My 910 currently has a black Exent PCB.)

Not sure whether these will be.

These are made to the exact same dimensions to the original quadcube PS2AVR PCB that was shipped with the 910. Should work, but I would double check with someone who has gone the other way and thrown a 910 PCB into an extent.
Southpaw 65 || Southpaw Full Size || Trinity XT TKL || TGR Jane V2 || TGR 910 RE || Duck Jetfire || Matrix Lab 1.2 OG || Jubi || Lunar || Lunar II || g80-1800 HEU

switchplate.co

Offline reconsiderit

  • Thread Starter
  • Posts: 546
  • Location: Sunnyvale, CA
  • I'm actually not left handed www.switchplate.co
Re: [IC] TGR 910 PCBs and Plates
« Reply #31 on: Thu, 08 August 2019, 03:53:05 »
If the PCB has underglow LEDs I'm defintiely in. Without it I'm a bit on the fence; it'll probably come down to the price.

Aiming at 35ish USD at 50qty. A little more at 30qty.

Going to get a quote with matte black silkscreen and some nice Hirose USB connectors and will report back with an estimated cost once I've crunched some numbers.
Southpaw 65 || Southpaw Full Size || Trinity XT TKL || TGR Jane V2 || TGR 910 RE || Duck Jetfire || Matrix Lab 1.2 OG || Jubi || Lunar || Lunar II || g80-1800 HEU

switchplate.co

Offline lamenthe

  • Posts: 34
Re: [IC] TGR 910 PCBs and Plates
« Reply #32 on: Thu, 08 August 2019, 14:20:10 »
Thanks reconsiderit, can't wait!

Offline Mcnos

  • Posts: 1279
    • GMK Fuyu
Re: [IC] TGR 910 PCBs and Plates
« Reply #33 on: Thu, 08 August 2019, 16:41:45 »
I'm in.

Is there support for blocker led as I prefer a frosted insert than the brass. Call me a Razer fanboi

PCB will not have support for blocker LED unfortunately

Please reconsider it

Offline romevi

  • Formerly romevi
  • * Exalted Elder
  • Posts: 8941
  • Location: The Windy City
Re: [IC] TGR 910 PCBs and Plates
« Reply #34 on: Thu, 08 August 2019, 16:48:39 »
I'm in.

Is there support for blocker led as I prefer a frosted insert than the brass. Call me a Razer fanboi

PCB will not have support for blocker LED unfortunately

Please reconsider it

UGH. I was going to write that but got sucked into a conversation irl and forgot.

Offline Mcnos

  • Posts: 1279
    • GMK Fuyu
Re: [IC] TGR 910 PCBs and Plates
« Reply #35 on: Thu, 08 August 2019, 18:50:38 »
I'm in.

Is there support for blocker led as I prefer a frosted insert than the brass. Call me a Razer fanboi

PCB will not have support for blocker LED unfortunately

Please reconsider it

UGH. I was going to write that but got sucked into a conversation irl and forgot.

Just don't have a life,

ez.

Offline zekkin

  • Posts: 508
  • my entire life was unlimited zekk works
Re: [IC] TGR 910 PCBs and Plates
« Reply #36 on: Thu, 08 August 2019, 19:05:51 »
I'll pick up 2 plates and PCBs! Filled the form.

Offline brianjking

  • Posts: 225
  • Location: Seattle, WA
  • always carry a towel.
    • @brianjking
Re: [IC] TGR 910 PCBs and Plates
« Reply #37 on: Thu, 08 August 2019, 20:39:28 »
I'd rather an RGB LED for the blocker and could care less if there are any LEDs for the bottom for side glow. One downside to the normal 910 & exent PCBs is I can't turn off the underglow/side glow LEDs while having the blocker LED lit up.
TGR 910 (Healios) | HHKB BT KBDFans Silence-X | Roadkit (Cherry MX Silent Blacks) |Leopold FC750r (Cherry MX Silent Reds |TADA68 (Zealios) | HHKB Pro 2 Type-S w/ Hasu BT | HHKB Pro 2 JP w/ Hasu BT & KBDFans Silence-X | RAMA M10-A w/ Zealios TINA-C w/ Cherry MX Silent Blacks HHKB BT Type-S

Offline lamenthe

  • Posts: 34
Re: [IC] TGR 910 PCBs and Plates
« Reply #38 on: Thu, 08 August 2019, 22:28:15 »
Edit: Learning and catching up to the whole custom keyboard thing. BMC is just super buggy on mac computers, so I can't get my current 910 board to properly map.

Looking forward to being able to use QMK firmware on these new PCB boards. That stuff is lightyears ahead.
« Last Edit: Fri, 09 August 2019, 03:50:45 by lamenthe »

Offline reconsiderit

  • Thread Starter
  • Posts: 546
  • Location: Sunnyvale, CA
  • I'm actually not left handed www.switchplate.co
Re: [IC] TGR 910 PCBs and Plates
« Reply #39 on: Fri, 09 August 2019, 17:42:12 »
So was talking to ai03 yesterday and he mentioned USB height for 1.2mm PCBs. Since the USB cutout on the 910 is designed for 1.6mm PCB, using a 1.2mm PCB will not work as the USB connector will sit .4mm higher than needed.

In short, these will be done in 1.6mm.
Southpaw 65 || Southpaw Full Size || Trinity XT TKL || TGR Jane V2 || TGR 910 RE || Duck Jetfire || Matrix Lab 1.2 OG || Jubi || Lunar || Lunar II || g80-1800 HEU

switchplate.co

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 12275
  • Location: RSTLN E
  • "Do you shovel to survive, or survive to shovel?"
Re: [IC] TGR 910 PCBs and Plates
« Reply #40 on: Fri, 09 August 2019, 18:27:22 »
So was talking to ai03 yesterday and he mentioned USB height for 1.2mm PCBs. Since the USB cutout on the 910 is designed for 1.6mm PCB, using a 1.2mm PCB will not work as the USB connector will sit .4mm higher than needed.

In short, these will be done in 1.6mm.

but how will i get my meme flex
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | ctrl.alt x GON 60% | TGR Alice | Mira SE #29 | Mira SE #34 | Revo One | z | Keycult No. 1 | AIS65 | First CW87 prototype | Mech27v1 | Camp C225 | Duck Orion V1 | LZ CLS sxh | Geon Frog TKL | Hiney TKL One | Geon Glare TKL



"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos, after I came back from a break | "Is Linkshine our Nixon?" -NAV | "Puddsy is the Puddsy of keebs" -ns90

Offline pikku-allu

  • Posts: 133
  • Location: Finland
  • IG: @kinnalek
Re: [IC] TGR 910 PCBs and Plates
« Reply #41 on: Fri, 09 August 2019, 18:38:40 »
So was talking to ai03 yesterday and he mentioned USB height for 1.2mm PCBs. Since the USB cutout on the 910 is designed for 1.6mm PCB, using a 1.2mm PCB will not work as the USB connector will sit .4mm higher than needed.

In short, these will be done in 1.6mm.

but how will i get my meme flex

From another standpoint, a DYI burger mount could lower the connector to the correct level.

Offline romevi

  • Formerly romevi
  • * Exalted Elder
  • Posts: 8941
  • Location: The Windy City
Re: [IC] TGR 910 PCBs and Plates
« Reply #42 on: Fri, 09 August 2019, 18:46:20 »
So was talking to ai03 yesterday and he mentioned USB height for 1.2mm PCBs. Since the USB cutout on the 910 is designed for 1.6mm PCB, using a 1.2mm PCB will not work as the USB connector will sit .4mm higher than needed.

In short, these will be done in 1.6mm.

but how will i get my meme flex

From another standpoint, a DYI burger mount could lower the connector to the correct level.

You shut your mouth, Evil Morty.

Offline noahf

  • Posts: 113
Re: [IC] TGR 910 PCBs and Plates
« Reply #43 on: Fri, 09 August 2019, 19:19:01 »
Im in for plate and pcb

Offline bisoromi

  • Formerly Duwang
  • Posts: 219
  • Location: D[M]V
  • owo
Re: [IC] TGR 910 PCBs and Plates
« Reply #44 on: Tue, 13 August 2019, 23:42:21 »
interested! Maybe I’ll design a case around this c:
(credits to Kokaloo)

Offline EMC Labs

  • Posts: 447
Re: [IC] TGR 910 PCBs and Plates
« Reply #45 on: Wed, 14 August 2019, 02:18:49 »
interested! Maybe I’ll design a case around this c:

Yes, please!

Offline otanishock

  • One of the cool kids :>
  • Posts: 712
  • Location: Boston
  • ファーストラブ
Re: [IC] TGR 910 PCBs and Plates
« Reply #46 on: Thu, 15 August 2019, 02:31:58 »
+ 1 for brass plate. All my 910s have brass plate. Good ole brass as plate material is always the OG classic.

In for a few pcbs as well. Thanks. Was more than excited when he sent me the link to your IC. Will watch this very closely.

Offline futurecrime

  • Posts: 1001
  • Location: London, England
  • Get Zooted
Re: [IC] TGR 910 PCBs and Plates
« Reply #47 on: Thu, 15 August 2019, 07:56:52 »
Filled in. Would love a real flexy thin pcb and pc plate with those cuts. Flexxx.

Offline EMC Labs

  • Posts: 447
Re: [IC] TGR 910 PCBs and Plates
« Reply #48 on: Thu, 15 August 2019, 08:05:54 »
We need a 910 case for this GB to be worthwhile.  :p

Offline Mcnos

  • Posts: 1279
    • GMK Fuyu
Re: [IC] TGR 910 PCBs and Plates
« Reply #49 on: Thu, 15 August 2019, 09:00:35 »
+ 1 for brass plate. All my 910s have brass plate. Good ole brass as plate material is always the OG classic.

In for a few pcbs as well. Thanks. Was more than excited when he sent me the link to your IC. Will watch this very closely.

Sure sure, you will watch it