geekhack

geekhack Marketplace => Classifieds => Topic started by: pr0ximity on Mon, 28 November 2016, 19:00:42

Title: [WTB] KMAC, GON, LZ-S, LZ-GH V1, cone/bar feet customs
Post by: pr0ximity on Mon, 28 November 2016, 19:00:42
Looking for any cone/bar feet Korean customs: LZ-S, LZ-GH (v1), KMAC (grey, not red/silver), GON NeRD


Also looking for:




SOLD
More
Recently replaced this with a different beamspring, so I need to clear some space!

Asking $200+shipping as-is, without an xwhatsit USB or solenoid controller. Now is a great time to get in on a beamspring as there is a GB starting over on DT for USB and solenoid controllers (https://deskthority.net/group-buys-f50/xwhatsit-beamspring-controller-production-run-t14500.html).

Shipping CONUS is around $35 with tracking to a random CA zip code I chose, let me know your zip and I can double check but I don't expect much variation in CONUS. Willing to do international, but know that it's around 11lbs without packing.

The keyboard is in frankly fantastic mechanical condition, and has IMO the best beamspring layout. I've disassembled and cleaned it including the caps, as well as removed the contamination shield. All switches are very nice and incredibly clean and the stems are straight on all of them. All caps are in great condition, no damage. There is essentially no rust; there was a very light surface spot about the size of a pencil eraser which I have sanded off, you can see the scuffs in this picture (http://i.imgur.com/KvjWdyw.jpg) below the mod to the right of the spacebar. There's a small area on the left side of the keyboard that was rubbed smooth but isn't very noticeable visually, just texturally. Some minor surface blemishes around the case but nothing major. A small crack on the lower-front-right corner which is surface-level only, in no risk of chipping, has no structural impact, and isn't visible unless you look carefully from under the keyboard. All keys move freely and the spacebar has a nice press to it (my new beamspring is a bit stiffer, this is close to the rest of the keys). Solenoid works great and there have been no issues getting it working and calibrated with an xwhatsit + solenoid driver. I will also include the original cable, controller, and contamination shield.

More pics available here: http://imgur.com/a/K9Th8

(http://i.imgur.com/9LhHXfi.jpg)

(http://i.imgur.com/Nkk4Lgj.jpg)

(http://i.imgur.com/WLGJgIK.jpg)

(http://i.imgur.com/xtVUSG8.jpg)

(http://i.imgur.com/qgKzPsX.jpg)

(http://i.imgur.com/GIYpJMt.jpg)

(http://i.imgur.com/vqw57Cg.jpg)

(http://i.imgur.com/sxiJUwl.jpg)

(http://i.imgur.com/jEa42Ms.jpg)

Title: Re: [WTS] IBM 5251 Beamspring
Post by: Firebolt1914 on Mon, 28 November 2016, 19:51:45
Holy crap, really want to buy this but I have no money to spend on keyboards. GLWS :thumb: :thumb: :thumb:
Title: Re: [WTB] QWERKeys B Series
Post by: pr0ximity on Sun, 18 December 2016, 14:56:34
Bump, figured I'd give it a shot, these things are probably in the back of someone's drawer somewhere
Title: Re: [WTB] QWERKeys B Series
Post by: reaper on Sun, 18 December 2016, 15:13:32
Quote from: pr0ximity on Sun, 18 December 2016, 14:56:34
These things are probably in the back of someone's drawer somewhere


Yes, they were.  :)
Title: Re: [WTB] QWERKeys B Series
Post by: pr0ximity on Sun, 18 December 2016, 15:27:49
Quote from: reaper on Sun, 18 December 2016, 15:13:32
Quote from: pr0ximity on Sun, 18 December 2016, 14:56:34
These things are probably in the back of someone's drawer somewhere


Yes, they were.  :)

 ;)
Title: Re: [WTB] QWERKeys B Series
Post by: pr0ximity on Tue, 02 May 2017, 22:03:36
Bump, still open to working something out if anyone has a set of these.
Title: Re: [WTB] Vintage MX Clear or Brown, QWERKeys B Series
Post by: pr0ximity on Mon, 15 January 2018, 12:02:14
Bump, looking for some vintage tactiles
Title: Re: [WTB] Vintage MX Clear or Brown, QWERKeys B Series
Post by: pr0ximity on Sat, 20 January 2018, 17:14:57
Bump
Title: Re: [WTB] Compaq G80-11800, Vintage MX Brown, QWERKeys B Series
Post by: pr0ximity on Fri, 26 January 2018, 10:36:30
Bump
Title: Re: [WTB] Compaq G80-11800, Vintage MX Brown, QWERKeys B Series
Post by: j0d1 on Sat, 17 February 2018, 21:58:03
Pmd.
Title: Re: [WTB/TF] KMAC 1 or 1.2 Titanium WKL
Post by: pr0ximity on Fri, 15 June 2018, 07:04:11
Bump, I know some of y'all have these in your closets
Title: Re: [WTB/TF] KMAC 1/1.2/LE titanium WKL (any condition)
Post by: ranker on Thu, 21 June 2018, 23:29:30
I have a black KMAC 1.2, any interest?  If so, send me a msg.
Title: Re: [WTB/TF] KMAC 1/1.2/LE titanium WKL (any condition)
Post by: pr0ximity on Fri, 22 June 2018, 06:14:36
Quote from: ranker on Thu, 21 June 2018, 23:29:30
I have a black KMAC 1.2, any interest?  If so, send me a msg.

Thanks, sorry I already found one. Updated my OP.
Title: Re: [WTB/TF] KMAC Titanium blockers, OTD Alu Esc, QWERKeys B Series
Post by: pr0ximity on Mon, 22 October 2018, 21:29:20
Bumping for the rest of my life
Title: Re: [WTB] KMAC, LZ-S, LZ-GH V1, cone/bar feet customs
Post by: pr0ximity on Sun, 08 January 2023, 15:21:36
Bump? rebuilt a KMAC recently and want more  :cool:
Title: Re: [WTB] KMAC, GON, LZ-S, LZ-GH V1, cone/bar feet customs
Post by: jonnybastard on Wed, 22 March 2023, 00:33:19
Am looking to sell my gunmetal KMAC 1.3 LE, if interested flick me a PM

Piccy here - https://geekhack.org/index.php?topic=31779.msg3130792#msg3130792
Title: Re: [WTB] KMAC, GON, LZ-S, LZ-GH V1, cone/bar feet customs
Post by: phat schlong on Wed, 22 March 2023, 07:37:22
PM'd!  :thumb: