Post by: Crazy Designers on Wed, 18 November 2020, 20:43:27
Firstly we wanna say thank you to all the Geekhackers, CYBERBOARD is our first run and it has gained so much love and support.
(https://i.imgur.com/OwAKGhy.jpg)
Back to the topic, we are planning to make a Christmas version of CYBERBOARD right now and it will be a PC keyboard.
This CB still has the Cybertruck shape but we are doing different designs inside.
2020/12/15 update
RGB on! not satisfied with the performance tho. (these are real photos)
(https://i.imgur.com/5FDMu5Q.jpg) (https://i.imgur.com/PXQpZMw.jpg)
2020/12/08 update
We got the first prototype! it doesn't have a bottom now....but we are completing it real quick :))
(https://i.imgur.com/xBC9OHR.jpg) (https://i.imgur.com/piOOnze.jpg)
(https://i.imgur.com/HNeDDI8.jpg) (https://i.imgur.com/4mtW3lE.jpg)
【Specs】
CyberTruck Shape
LED Panel
Top mount
ANSI Layout
Hot-Swap PCB
Not based on QMK (MY BAD BRUH)
【Improvements】
More
(https://i.imgur.com/k3ifgRh.png)(https://i.imgur.com/W4EsbsG.png)
- PCB
ICE COLD BABY! To match the Christmas vibe, we add RGB LEDs to the PCB. We also plan to make red color PCBs, need to see the proto tho.
- The Structure of LED Panel
We canceled the magnetic design this time. The panel and the acrylic lens are merged together and it will be tightened with screws.
- The Bottom
We still retained the wireless charging module, but removed its cover, and now the bottom of the keyboard is a flat surface.
- Brass Weight
We added a brass weight inside the CB, which is also our battery holder. In this way, all wires are isolated from the bottom cover. When you open the CB, you don't worry about breaking that ribbon cables anymore.
- Other thoughts
In addition to the upgrades mentioned above, there is “one more thing”.
Okay, actually we got more than 1...
1.We are making custom screws for the keeb
2.A brass nameplate would be on the keeb (it's on the space upon the array zone and the pattern is being voted in our discord)
3.The plate and the silicone mute mount are also semi-transparent.]
(https://i.imgur.com/PwGdfUk.jpg)(https://i.imgur.com/apeqYIK.png)
- PCB
ICE COLD BABY! To match the Christmas vibe, we add RGB LEDs to the PCB. We also plan to make red color PCBs, need to see the proto tho.
- The Structure of LED Panel
We canceled the magnetic design this time. The panel and the acrylic lens are merged together and it will be tightened with screws.
- The Bottom
We still retained the wireless charging module, but removed its cover, and now the bottom of the keyboard is a flat surface.
- Brass Weight
We added a brass weight inside the CB, which is also our battery holder. In this way, all wires are isolated from the bottom cover. When you open the CB, you don't worry about breaking that ribbon cables anymore.
- Other thoughts
In addition to the upgrades mentioned above, there is “one more thing”.
Okay, actually we got more than 1...
1.We are making custom screws for the keeb
2.A brass nameplate would be on the keeb (it's on the space upon the array zone and the pattern is being voted in our discord)
3.The plate and the silicone mute mount are also semi-transparent.]
(https://i.imgur.com/PwGdfUk.jpg)(https://i.imgur.com/apeqYIK.png)
Estimate price: 500 USD
Quantity: 400 - 600 pcs
For the latest information and more, please join our discord server. Thanks!
Discord Link: https://discord.gg/Xre4H4c
CYBERBOARD R1: https://www.indiegogo.com/projects/cyberboard-world-s-1st-wireless-charging-keyboard/x/24369592#/
Post by: kuro0renji on Wed, 18 November 2020, 20:47:01
Post by: Crazy Designers on Wed, 18 November 2020, 20:49:22
Post by: Moisture on Wed, 18 November 2020, 20:50:16
Would you sell the RGB PCB separately as well to put into the OG Cyberboard?
Post by: hali on Wed, 18 November 2020, 20:52:00
Post by: brillwill on Wed, 18 November 2020, 20:55:26
Post by: Crazy Designers on Wed, 18 November 2020, 21:08:40
I have the purple Cyberboard, but my interest is piqued.
Would you sell the RGB PCB separately as well to put into the OG Cyberboard?
I'm sorry, as I said, this RGB pcb is not compatible with r1 Cyberboard.
Post by: darthcapn on Wed, 18 November 2020, 21:11:35
Sent from my SM-G988U using Tapatalk
Post by: hammerbrotha on Wed, 18 November 2020, 21:12:12
Sent from my SM-G965W using Tapatalk
Post by: Tyson on Wed, 18 November 2020, 22:02:04
Post by: IMZO on Wed, 18 November 2020, 22:37:27
Post by: svenge on Wed, 18 November 2020, 23:23:13
ps.. crazy designers u crazy.
Post by: malikons on Wed, 18 November 2020, 23:58:43
Sent from my SM-F916B using Tapatalk
Post by: kk73715 on Thu, 19 November 2020, 02:10:32
Reserved
nice.
not a fan of the logo next to the arrow keys.
Post by: sup3r170va on Thu, 19 November 2020, 02:28:18
Post by: FlitzDeelman on Thu, 19 November 2020, 03:49:50
Post by: Wonderfool on Thu, 19 November 2020, 11:39:09
Post by: Havattack on Thu, 19 November 2020, 11:59:24
Wow. Not that I have any money left after this year.
This. This so much, There are like 3 500$ keyboards coming out in the next month....
"Quantity: less than CB R1" ...That's a bad idea... I imagine the demand for this has grown quite a bit after the first GB... A lot of people are chomping at the bit fore this thing..
Post by: hrmmm on Thu, 19 November 2020, 16:35:38
Post by: dibstern on Thu, 19 November 2020, 17:02:53
Post by: hexa on Thu, 19 November 2020, 19:24:59
Post by: Crazy Designers on Thu, 19 November 2020, 20:00:15
Wow. Not that I have any money left after this year.
This. This so much, There are like 3 500$ keyboards coming out in the next month....
"Quantity: less than CB R1" ...That's a bad idea... I imagine the demand for this has grown quite a bit after the first GB... A lot of people are chomping at the bit fore this thing..
hi there, we don't have much experience in making keyboards, so we could only sell them in a small amount. We have tried many technical improvements in this Xmas Special CB, thank you!
Post by: Havattack on Thu, 19 November 2020, 20:29:56
No, thank YOU. This board is dope as hell, and i'm very happy to hear you have a round 2 in the works.Wow. Not that I have any money left after this year.
This. This so much, There are like 3 500$ keyboards coming out in the next month....
"Quantity: less than CB R1" ...That's a bad idea... I imagine the demand for this has grown quite a bit after the first GB... A lot of people are chomping at the bit fore this thing..
hi there, before our next official work comes out, we hope to make a special edition as a transition. We don't have much experience in making keyboards, so we have tried many technical attempts in this edition. The Xmas Special CB will help us do better on the CB R2, thank you!
So, just to be clear, if i really want this keyboard, but would prefer an aluminum case, i should just wait for round 2?
Post by: Crazy Designers on Mon, 23 November 2020, 01:35:35
for the nameplates, heres the update.
1. Elk A
2. Elk B
3. Snowflake
4. No nameplate
*nameplates will have gradual color finally, the renders are for reference only
Post by: paooolol on Mon, 23 November 2020, 02:10:10
Post by: darthcapn on Mon, 23 November 2020, 02:10:56
Sent from my SM-G988U using Tapatalk
Post by: donny_pete on Mon, 23 November 2020, 11:52:08
Post by: Crazy Designers on Tue, 24 November 2020, 01:25:13
ok ppl dont want the nameplate....then we need to think about removing this thing.
Post by: nathanchere on Tue, 24 November 2020, 05:35:42
Post by: Havattack on Tue, 24 November 2020, 13:09:06
ok ppl dont want the nameplate....then we need to think about removing this thing.You did not answer my question, and i noticed you edited "R2" out of your post... So, is there going to be a round 2 after the xmas special, and will there be aluminum cases in it? and why did you edit your post?
Post by: paperassgasket on Tue, 24 November 2020, 13:11:20
I still hold out hope for a 60% HHKB cyberboard one day. Even if Santa didn't deliver, there's still hope.
Same friend.
Maybe next year.
Post by: Crazy Designers on Tue, 24 November 2020, 22:00:26
ok ppl dont want the nameplate....then we need to think about removing this thing.You did not answer my question, and i noticed you edited "R2" out of your post... So, is there going to be a round 2 after the xmas special, and will there be aluminum cases in it? and why did you edit your post?
there IS a round 2 after the xmas special, and it could be alu or not. We are not sure about that now, so I think I should not leave my words here... :rolleyes: :rolleyes: sorry dude
Post by: FlitzDeelman on Tue, 24 November 2020, 22:03:17
Thanks for clarifying!ok ppl dont want the nameplate....then we need to think about removing this thing.You did not answer my question, and i noticed you edited "R2" out of your post... So, is there going to be a round 2 after the xmas special, and will there be aluminum cases in it? and why did you edit your post?
there IS a round 2 after the xmas special, and it could be alu or not. We are not sure about that now, so I think I should not leave my words here... :rolleyes: :rolleyes: sorry dude
Post by: Havattack on Wed, 25 November 2020, 11:16:25
Okay, that makes sense. Thanks for taking the time to answer my question, it is much appreciated.ok ppl dont want the nameplate....then we need to think about removing this thing.You did not answer my question, and i noticed you edited "R2" out of your post... So, is there going to be a round 2 after the xmas special, and will there be aluminum cases in it? and why did you edit your post?
there IS a round 2 after the xmas special, and it could be alu or not. We are not sure about that now, so I think I should not leave my words here... :rolleyes: :rolleyes: sorry dude
Post by: Crazy Designers on Sun, 29 November 2020, 22:03:35
(https://i.imgur.com/o1dBrKw.jpg) (https://i.imgur.com/rlzSfdT.jpg)
(raw version)
(https://i.imgur.com/QGemjen.jpg)
finger prints are so annoying lol :-[
Post by: h00k on Mon, 30 November 2020, 04:13:42
Post by: Crazy Designers on Tue, 08 December 2020, 01:52:27
Post by: hrmmm on Tue, 08 December 2020, 07:50:02
Post by: iinko_mk on Tue, 08 December 2020, 17:42:59
Post by: Rumblehotep on Tue, 08 December 2020, 17:59:06
Post by: Havattack on Tue, 08 December 2020, 21:11:40
Board looks great, but what is that tricolor keyset and how can i has?I think it's "JTK VOTOK-1" here's one place that still has it. Get it before i do. https://dailyclack.com/collections/keycaps/products/jtk-vostok-1
Post by: hrmmm on Tue, 08 December 2020, 21:27:25
Board looks great, but what is that tricolor keyset and how can i has?
It's a render.
Post by: Havattack on Tue, 08 December 2020, 23:37:54
Board looks great, but what is that tricolor keyset and how can i has?
It's a render.
...Yeah... and he's asking what key set is featured in said render... and it's vostok-1
Post by: Rumblehotep on Wed, 09 December 2020, 00:57:50
Ačiū!Board looks great, but what is that tricolor keyset and how can i has?I think it's "JTK VOTOK-1" here's one place that still has it. Get it before i do. https://dailyclack.com/collections/keycaps/products/jtk-vostok-1
Post by: Shiba1337 on Wed, 09 December 2020, 01:14:38
Post by: hrmmm on Wed, 09 December 2020, 06:33:42
Board looks great, but what is that tricolor keyset and how can i has?
It's a render.
...Yeah... and he's asking what key set is featured in said render... and it's vostok-1
It's close to vostok-1, but it's not vostok-1.
Post by: Havattack on Wed, 09 December 2020, 09:45:54
How do you figure? While the colors may not be entirely accurate, it being a render, it is exactly the same. (Except the red "control" and "fn" are replaced with more ornate novelties in the actual set.) I don;t see any real difference.Board looks great, but what is that tricolor keyset and how can i has?
It's a render.
...Yeah... and he's asking what key set is featured in said render... and it's vostok-1
It's close to vostok-1, but it's not vostok-1.
Post by: konstantin on Wed, 09 December 2020, 09:57:29
Post by: Nuclear Nachos on Wed, 09 December 2020, 10:30:44
Post by: Crazy Designers on Tue, 15 December 2020, 02:00:30
Post by: Nonnegaard on Tue, 15 December 2020, 05:11:34
Post by: Havattack on Tue, 15 December 2020, 11:09:02
I kind of want to see this with four rotary encoders on the side as wheels. make them slightly recessed. would look horrible, but kinda funny i think.
It would be right at home next to that awful cat head shaped keyboard. The silly, keeb club!
Post by: obull on Wed, 16 December 2020, 15:31:51
Post by: whose_stone on Thu, 17 December 2020, 21:44:32