Author Topic: [IC] GSKT-00 (Read 78937 times)

noorejji · « **Reply #200 on:** Thu, 09 January 2020, 10:11:58 »

Quote from: CoolMike on Thu, 09 January 2020, 07:16:13

I wonder what color I can get this Cerakoted to match my Nautilus Nightmares coming

Not a bad idea! H400 looks like it would do the job. I was thinking a blue-grey for classic beige or firefly GMK Nord - possibly Blue Titanium (H-185Q) or Northern Lights (H-315Q).

Uleet · « **Reply #201 on:** Thu, 09 January 2020, 10:20:13 »

This is the keyboard that got me into mechanical keyboards. After Nathan spoke so highly about it I am excited LETS GOOOOO! Good luck on the GB!

FredBananaz · « **Reply #202 on:** Thu, 09 January 2020, 12:34:12 »

Hopefully I can get myself one of these. Definetly interested

jrs · « **Reply #203 on:** Fri, 10 January 2020, 02:22:42 »

Is it considered a "true isolation mount"?

vegs · « **Reply #204 on:** Fri, 10 January 2020, 03:24:06 »

Quote from: jrs on Fri, 10 January 2020, 02:22:42

Is it considered a "true isolation mount"?

Here we go

nguyenhimself · « **Reply #205 on:** Fri, 10 January 2020, 03:56:25 »

Quote from: jrs on Fri, 10 January 2020, 02:22:42

Is it considered a "true isolation mount"?

Go ahead and define "true isolation mount" yourself.
What are you asking for here?

adxlk · « **Reply #206 on:** Fri, 10 January 2020, 04:00:53 »

Quote from: jrs on Fri, 10 January 2020, 02:22:42

Is it considered a "true isolation mount"?

lolafineday · « **Reply #207 on:** Fri, 10 January 2020, 04:13:35 »

Quote from: adxlk on Fri, 10 January 2020, 04:00:53

Quote from: jrs on Fri, 10 January 2020, 02:22:42
Is it considered a "true isolation mount"?

Show Image

OH NONONO NOT AGAIN.

Sent from my SM-G975F using Tapatalk

adxlk · « **Reply #208 on:** Fri, 10 January 2020, 04:19:31 »

Quote from: lolafineday on Fri, 10 January 2020, 04:13:35

Quote from: adxlk on Fri, 10 January 2020, 04:00:53
Quote from: jrs on Fri, 10 January 2020, 02:22:42
Is it considered a "true isolation mount"?

Show Image

OH NONONO NOT AGAIN.

Sent from my SM-G975F using Tapatalk

futurecrime · « **Reply #209 on:** Fri, 10 January 2020, 04:43:54 »

lmao.

jrs · « **Reply #210 on:** Fri, 10 January 2020, 06:23:12 »

Will the PCB be red? I like the look of a red PCB with red aluminum half plate.

weaston · « **Reply #211 on:** Fri, 10 January 2020, 06:54:20 »

Quote from: jrs on Fri, 10 January 2020, 02:22:42

Is it considered a "true isolation mount"?

Nope, the plate rests in wing cuts in the top case. This is just considered gasket mount and uses a single gasket wrapped around the assembly.

Datastream · « **Reply #212 on:** Fri, 10 January 2020, 09:28:13 »

Im interested in this board at HHKB config

adxlk · « **Reply #213 on:** Fri, 10 January 2020, 09:47:16 »

Quote from: jrs on Fri, 10 January 2020, 06:23:12

Will the PCB be red? I like the look of a red PCB with red aluminum half plate.

Quote

They'll be either green or red, I might even be able to offer choice of color.

Tyler · « **Reply #214 on:** Fri, 10 January 2020, 11:28:30 »

Super stoked for this.

macclack · « **Reply #215 on:** Fri, 10 January 2020, 18:49:43 »

Yay!

fluidin · « **Reply #216 on:** Fri, 10 January 2020, 19:20:06 »

would this support an aftermarket HS pcb like the instant60? assuming no but i guess it wouldn't hurt to ask.

adxlk · « **Reply #217 on:** Fri, 10 January 2020, 19:43:21 »

Quote from: fluidin on Fri, 10 January 2020, 19:20:06

would this support an aftermarket HS pcb like the instant60? assuming no but i guess it wouldn't hurt to ask.

Indeed No. The PCB is proprietary.

Fnzzy · « **Reply #218 on:** Fri, 10 January 2020, 20:01:50 »

Probably 0 chance but can we get a white PCB option?

H3NT4I · « **Reply #219 on:** Fri, 10 January 2020, 21:12:44 »

pls i need dis

weaston · « **Reply #220 on:** Fri, 10 January 2020, 21:15:15 »

Quote from: Fnzzy on Fri, 10 January 2020, 20:01:50

Probably 0 chance but can we get a white PCB option?

Actually it is possible yeah. We had red, green and white in the original GB. I would like to keep it to red and green, but if the prices don't change for us then we can probably offer white as well. No promises though. Here's what the originals looked like.

jrs · « **Reply #221 on:** Fri, 10 January 2020, 21:21:28 »

Will the diodes need to be soldered?

lolafineday · « **Reply #222 on:** Fri, 10 January 2020, 21:33:05 »

Quote from: weaston on Fri, 10 January 2020, 21:15:15

Quote from: Fnzzy on Fri, 10 January 2020, 20:01:50
Probably 0 chance but can we get a white PCB option?

Actually it is possible yeah. We had red, green and white in the original GB. I would like to keep it to red and green, but if the prices don't change for us then we can probably offer white as well. No promises though. Here's what the originals looked like.

Show Image

Haha nice italian flag me like

Sent from my SM-G975F using Tapatalk

weaston · « **Reply #223 on:** Fri, 10 January 2020, 21:42:14 »

Quote from: jrs on Fri, 10 January 2020, 21:21:28

Will the diodes need to be soldered?

Nope, they'll be soldered from the factory. You'll just need to solder switches.

dantambok · « **Reply #224 on:** Fri, 10 January 2020, 21:45:12 »

how does halfplate + pcb flex cutouts feel? i would imagine it being bouncy? cant wait!

jrs · « **Reply #225 on:** Fri, 10 January 2020, 21:57:13 »

Quote from: dantambok on Fri, 10 January 2020, 21:45:12

how does halfplate + pcb flex cutouts feel? i would imagine it being bouncy? cant wait!

G I G A F L E X

EnthusiastDude · « **Reply #226 on:** Sat, 11 January 2020, 04:53:25 »

I really like the concept of this board, especially the alps support and well the gasket mount. Sadly I cannot use anything smaller than 65% layouts

Is there a possibility that you will do bigger boards in the future?

Fnzzy · « **Reply #227 on:** Sat, 11 January 2020, 05:30:19 »

Quote from: weaston on Fri, 10 January 2020, 21:15:15

Quote from: Fnzzy on Fri, 10 January 2020, 20:01:50
Probably 0 chance but can we get a white PCB option?

Actually it is possible yeah. We had red, green and white in the original GB. I would like to keep it to red and green, but if the prices don't change for us then we can probably offer white as well. No promises though. Here's what the originals looked like.

Show Image

Hapi boi

sleek · « **Reply #228 on:** Sat, 11 January 2020, 12:05:55 »

In for this, always wanted a classic gasket keeb. GLWS!

Etherealsound · « **Reply #229 on:** Sat, 11 January 2020, 15:20:03 »

Insanely good price. I might just have to join in on this...

PhiloopLOL · « **Reply #230 on:** Sat, 11 January 2020, 15:48:37 »

I really interested but am also interested as too why there is no brass plate?

noorejji · « **Reply #231 on:** Sat, 11 January 2020, 16:33:31 »

Quote from: PhiloopLOL on Sat, 11 January 2020, 15:48:37

I really interested but am also interested as too why there is no brass plate?

I think stainless steel is a good alternative. You get that muted sound signature and a solid buttom down. The best sounding keyboard I know is a TGR Jane with SS plate.

weaston · « **Reply #232 on:** Sat, 11 January 2020, 16:35:32 »

Quote from: PhiloopLOL on Sat, 11 January 2020, 15:48:37

I really interested but am also interested as too why there is no brass plate?

I just don't like brass plates much.

_PixelNinja · « **Reply #233 on:** Sat, 11 January 2020, 16:40:53 »

Quote from: weaston on Fri, 10 January 2020, 21:15:15

Quote from: Fnzzy on Fri, 10 January 2020, 20:01:50
Probably 0 chance but can we get a white PCB option?

Actually it is possible yeah. We had red, green and white in the original GB. I would like to keep it to red and green, but if the prices don't change for us then we can probably offer white as well. No promises though. Here's what the originals looked like.

Show Image

Crossed fingers. White would be so cool!

LightningXI · « **Reply #234 on:** Sat, 11 January 2020, 17:03:22 »

Quote from: dantambok on Fri, 10 January 2020, 21:45:12

how does halfplate + pcb flex cutouts feel? i would imagine it being bouncy? cant wait!

My initial build with the 00 was half plate with the proprietary PCB that has the cross-board cutouts. It's easily the bounciest board I own.

Zeelobby · « **Reply #235 on:** Sat, 11 January 2020, 17:16:33 »

Quote from: LightningXI on Sat, 11 January 2020, 17:03:22

Quote from: dantambok on Fri, 10 January 2020, 21:45:12
how does halfplate + pcb flex cutouts feel? i would imagine it being bouncy? cant wait!

My initial build with the 00 was half plate with the proprietary PCB that has the cross-board cutouts. It's easily the bounciest board I own.

Have you tried any other combos with the 00? If so which did you enjoy the most?

Sent from my Pixel 3 XL using Tapatalk

sarabee · « **Reply #236 on:** Sat, 11 January 2020, 17:36:25 »

Hoping to get in for hhkb, fingers crossed!

LightningXI · « **Reply #237 on:** Sat, 11 January 2020, 17:55:17 »

Quote from: Zeelobby on Sat, 11 January 2020, 17:16:33

Quote from: LightningXI on Sat, 11 January 2020, 17:03:22
Quote from: dantambok on Fri, 10 January 2020, 21:45:12
how does halfplate + pcb flex cutouts feel? i would imagine it being bouncy? cant wait!

My initial build with the 00 was half plate with the proprietary PCB that has the cross-board cutouts. It's easily the bounciest board I own.
Have you tried any other combos with the 00? If so which did you enjoy the most?

Sent from my Pixel 3 XL using Tapatalk

I've also tried full aluminum plate and it was nice. I honestly would recommend either with confidence.

You can't really go wrong with the available choices. Cheers.

amnesia0287 · « **Reply #238 on:** Sat, 11 January 2020, 18:28:26 »

Hmmm... I said no more 60s... but there was a lot of praise of this board. Maybe I’ll have to try and get one just to test.

If this buy goes well do you have any plans to make anything else? Like a 65/75

?

ArchDill · « **Reply #239 on:** Sat, 11 January 2020, 19:40:06 »

Quote from: weaston on Sat, 11 January 2020, 16:35:32

Quote from: PhiloopLOL on Sat, 11 January 2020, 15:48:37
I really interested but am also interested as too why there is no brass plate?

I just don't like brass plates much.

Honestly, having a Stainless Steel plate option over brass is so refreshing. I was a bit bummed when the brass craze started because I prefer the SS bottom out.

weaston · « **Reply #240 on:** Sat, 11 January 2020, 20:23:35 »

Quote from: ArchDill on Sat, 11 January 2020, 19:40:06

Honestly, having a Stainless Steel plate option over brass is so refreshing. I was a bit bummed when the brass craze started because I prefer the SS bottom out.

Right there with you. If I want a stiff plate I go to SS every time.

haingo1094 · « **Reply #241 on:** Sat, 11 January 2020, 20:49:29 »

do we have the exactly time for openning gb ?

is it still 20th ?

cdhoffmann · « **Reply #242 on:** Sat, 11 January 2020, 21:00:14 »

Quote from: ArchDill on Sat, 11 January 2020, 19:40:06

Quote from: weaston on Sat, 11 January 2020, 16:35:32
Quote from: PhiloopLOL on Sat, 11 January 2020, 15:48:37
I really interested but am also interested as too why there is no brass plate?

I just don't like brass plates much.

Honestly, having a Stainless Steel plate option over brass is so refreshing. I was a bit bummed when the brass craze started because I prefer the SS bottom out.

If you don’t mind me asking, what do you prefer about ss over brass? I know ss is supposed to be slightly more stiff but I’m curious as I haven’t tried ss.

Sent from my iPhone using Tapatalk

jrs · « **Reply #243 on:** Sat, 11 January 2020, 21:35:53 »

I am going to get the GSKT-00 to cure my soul sickness.

chive_ · « **Reply #244 on:** Sun, 12 January 2020, 10:53:40 »

So in. This one is gonna go fast!

ArchDill · « **Reply #245 on:** Sun, 12 January 2020, 12:09:24 »

Quote from: cdhoffmann on Sat, 11 January 2020, 21:00:14

Quote from: ArchDill on Sat, 11 January 2020, 19:40:06
Quote from: weaston on Sat, 11 January 2020, 16:35:32
Quote from: PhiloopLOL on Sat, 11 January 2020, 15:48:37
I really interested but am also interested as too why there is no brass plate?

I just don't like brass plates much.

Honestly, having a Stainless Steel plate option over brass is so refreshing. I was a bit bummed when the brass craze started because I prefer the SS bottom out.

If you don’t mind me asking, what do you prefer about ss over brass? I know ss is supposed to be slightly more stiff but I’m curious as I haven’t tried ss.

Sent from my iPhone using Tapatalk

Brass has a bit off a softer bottom out in my opinion. SS is a bit more harsh, which I like. I love a really solid bottom out on a board.

mr.bean · « **Reply #246 on:** Sun, 12 January 2020, 14:32:04 »

Which colors are available for cerakoting?

Vigrith · « **Reply #247 on:** Sun, 12 January 2020, 16:12:34 »

Quote from: mr.bean on Sun, 12 January 2020, 14:32:04

Which colors are available for cerakoting?

https://geekhack.org/index.php?topic=104130.msg2850697#msg2850697

zF4TE · « **Reply #248 on:** Sun, 12 January 2020, 16:16:42 »

Sup Weaston, what's the lead time ?

adxlk · « **Reply #249 on:** Sun, 12 January 2020, 19:14:37 »

Quote from: zF4TE on Sun, 12 January 2020, 16:16:42

Sup Weaston, what's the lead time ?

Quote

Can't really give one now, but I know that board manu time would be at least a month if not closer to 2, packing and shipping would be another 3 weeks at least. That is all assuming the buy reaches the max unit cap. If I open orders on the 20th then I would need to give at least 2 weeks to pay invoices so it would be probably mid february when the manu order got officially submitted. I try to keep things as quick as I possibly can and the original GB went quick so let's cross our fingers and hope things stay smooth.

News:

Author Topic: [IC] GSKT-00 (Read 78937 times)