Are your eyes bleeding? You can always change your theme.
0 Members and 1 Guest are viewing this topic.
ALSO I WILL START THE NEXT INTEREST CHECK AFTER VALENTINES DAY.
any chance for the lightsaber plates to have the notches for easier removal of switch tops?
Strange enough, I'm just interested in the case. So is there anyone who's just after the PCB willing to split a kit with me? Or is it possible at all to just buy a case?
By the way, is the Lightsaver for sale somewhere? I kinda want one.
Please read a few pages back. We will be starting an interest check for another round soon.
Forgive my ignorance. What would i need to assemble one of these, tools and processes involved.
I am totally new for this forum. What should i do if i want do but the lightsaver v2?
Quote from: JaccoW on Thu, 27 November 2014, 05:38:12I'm trying my hand at programming my Orion at the moment... but I am failing hard. And since the Lightsaver uses the same software I thought I'd ask here.Using the O2D keymapper I figured out where the flip key is but I have been unable to do any programming. Seriously no idea how.I believe TrueCustom was working on a proper translation?basic steps when i did it on my eagle / viper:1. make your layout in 02D and save a hex file (windows region needs to be set to Korean to program arrows and some led functions)2. hold down the flip or bootloader key while you plug in your keyboard (keys will not function if correctly in bootloader mode)3. go into device manager and find your keyboard (will have an exclamation mark) and update the driver. (the driver should be in your one of your flip or other avr folders. if there's no devices that need drivers you might already have it installed but make sure you look around)4. open flip, File - Load HEX File (load the one you created)5. Select Target Device (ATmega32u4), Select a Communication Medium (usb) *if it can't find the kb, you didn't do step 3 correctly*6. make sure everything is checked in the Operations Flow and click Run (if flip gets stuck after Blank Check and doesn't program, you might need to reload the hex file, this part is clumsy. play order until it works)7. after programming is successful, make sure the Reset box in the bottom right is checked and hit Start Application to reboot your kbeverything should be good to go after that.good luck!
I'm trying my hand at programming my Orion at the moment... but I am failing hard. And since the Lightsaver uses the same software I thought I'd ask here.Using the O2D keymapper I figured out where the flip key is but I have been unable to do any programming. Seriously no idea how.I believe TrueCustom was working on a proper translation?
Quote from: deci on Thu, 27 November 2014, 19:37:02Quote from: JaccoW on Thu, 27 November 2014, 05:38:12I'm trying my hand at programming my Orion at the moment... but I am failing hard. And since the Lightsaver uses the same software I thought I'd ask here.Using the O2D keymapper I figured out where the flip key is but I have been unable to do any programming. Seriously no idea how.I believe TrueCustom was working on a proper translation?basic steps when i did it on my eagle / viper:1. make your layout in 02D and save a hex file (windows region needs to be set to Korean to program arrows and some led functions)2. hold down the flip or bootloader key while you plug in your keyboard (keys will not function if correctly in bootloader mode)3. go into device manager and find your keyboard (will have an exclamation mark) and update the driver. (the driver should be in your one of your flip or other avr folders. if there's no devices that need drivers you might already have it installed but make sure you look around)4. open flip, File - Load HEX File (load the one you created)5. Select Target Device (ATmega32u4), Select a Communication Medium (usb) *if it can't find the kb, you didn't do step 3 correctly*6. make sure everything is checked in the Operations Flow and click Run (if flip gets stuck after Blank Check and doesn't program, you might need to reload the hex file, this part is clumsy. play order until it works)7. after programming is successful, make sure the Reset box in the bottom right is checked and hit Start Application to reboot your kbeverything should be good to go after that.good luck!This is great advice, I have all this working now on my Lightsaver. I am having problems with the arrow keys though. The 02D software shows the arrow cluster as "?", and I don't think it's mapping the right codes to the keys. Not sure what I am doing
Quote from: 64rky on Tue, 05 January 2016, 10:25:30Quote from: deci on Thu, 27 November 2014, 19:37:02Quote from: JaccoW on Thu, 27 November 2014, 05:38:12I'm trying my hand at programming my Orion at the moment... but I am failing hard. And since the Lightsaver uses the same software I thought I'd ask here.Using the O2D keymapper I figured out where the flip key is but I have been unable to do any programming. Seriously no idea how.I believe TrueCustom was working on a proper translation?basic steps when i did it on my eagle / viper:1. make your layout in 02D and save a hex file (windows region needs to be set to Korean to program arrows and some led functions)2. hold down the flip or bootloader key while you plug in your keyboard (keys will not function if correctly in bootloader mode)3. go into device manager and find your keyboard (will have an exclamation mark) and update the driver. (the driver should be in your one of your flip or other avr folders. if there's no devices that need drivers you might already have it installed but make sure you look around)4. open flip, File - Load HEX File (load the one you created)5. Select Target Device (ATmega32u4), Select a Communication Medium (usb) *if it can't find the kb, you didn't do step 3 correctly*6. make sure everything is checked in the Operations Flow and click Run (if flip gets stuck after Blank Check and doesn't program, you might need to reload the hex file, this part is clumsy. play order until it works)7. after programming is successful, make sure the Reset box in the bottom right is checked and hit Start Application to reboot your kbeverything should be good to go after that.good luck!This is great advice, I have all this working now on my Lightsaver. I am having problems with the arrow keys though. The 02D software shows the arrow cluster as "?", and I don't think it's mapping the right codes to the keys. Not sure what I am doing Change your region on the pc to korea then restart and it should fix that.I've had three lightsavers go through me and each time I've had to do that to reprogram the arrow keys. Edit: For clarificationShow Image
MoreQuote from: filphil on Tue, 05 January 2016, 10:50:02Quote from: 64rky on Tue, 05 January 2016, 10:25:30Quote from: deci on Thu, 27 November 2014, 19:37:02Quote from: JaccoW on Thu, 27 November 2014, 05:38:12I'm trying my hand at programming my Orion at the moment... but I am failing hard. And since the Lightsaver uses the same software I thought I'd ask here.Using the O2D keymapper I figured out where the flip key is but I have been unable to do any programming. Seriously no idea how.I believe TrueCustom was working on a proper translation?basic steps when i did it on my eagle / viper:1. make your layout in 02D and save a hex file (windows region needs to be set to Korean to program arrows and some led functions)2. hold down the flip or bootloader key while you plug in your keyboard (keys will not function if correctly in bootloader mode)3. go into device manager and find your keyboard (will have an exclamation mark) and update the driver. (the driver should be in your one of your flip or other avr folders. if there's no devices that need drivers you might already have it installed but make sure you look around)4. open flip, File - Load HEX File (load the one you created)5. Select Target Device (ATmega32u4), Select a Communication Medium (usb) *if it can't find the kb, you didn't do step 3 correctly*6. make sure everything is checked in the Operations Flow and click Run (if flip gets stuck after Blank Check and doesn't program, you might need to reload the hex file, this part is clumsy. play order until it works)7. after programming is successful, make sure the Reset box in the bottom right is checked and hit Start Application to reboot your kbeverything should be good to go after that.good luck!This is great advice, I have all this working now on my Lightsaver. I am having problems with the arrow keys though. The 02D software shows the arrow cluster as "?", and I don't think it's mapping the right codes to the keys. Not sure what I am doing Change your region on the pc to korea then restart and it should fix that.I've had three lightsavers go through me and each time I've had to do that to reprogram the arrow keys. Edit: For clarificationShow ImageThank you... the place I eventually needed to set this was in the System Locale (Control Panel -> Region and Language -> Administrative tab -> Language for non-Unicode Programs -> Change system locale). It all works now...Here's some pictures of my board so I can stay on topic: Show ImageShow ImageShow ImageShow Image
Quote from: filphil on Tue, 05 January 2016, 10:50:02Quote from: 64rky on Tue, 05 January 2016, 10:25:30Quote from: deci on Thu, 27 November 2014, 19:37:02Quote from: JaccoW on Thu, 27 November 2014, 05:38:12I'm trying my hand at programming my Orion at the moment... but I am failing hard. And since the Lightsaver uses the same software I thought I'd ask here.Using the O2D keymapper I figured out where the flip key is but I have been unable to do any programming. Seriously no idea how.I believe TrueCustom was working on a proper translation?basic steps when i did it on my eagle / viper:1. make your layout in 02D and save a hex file (windows region needs to be set to Korean to program arrows and some led functions)2. hold down the flip or bootloader key while you plug in your keyboard (keys will not function if correctly in bootloader mode)3. go into device manager and find your keyboard (will have an exclamation mark) and update the driver. (the driver should be in your one of your flip or other avr folders. if there's no devices that need drivers you might already have it installed but make sure you look around)4. open flip, File - Load HEX File (load the one you created)5. Select Target Device (ATmega32u4), Select a Communication Medium (usb) *if it can't find the kb, you didn't do step 3 correctly*6. make sure everything is checked in the Operations Flow and click Run (if flip gets stuck after Blank Check and doesn't program, you might need to reload the hex file, this part is clumsy. play order until it works)7. after programming is successful, make sure the Reset box in the bottom right is checked and hit Start Application to reboot your kbeverything should be good to go after that.good luck!This is great advice, I have all this working now on my Lightsaver. I am having problems with the arrow keys though. The 02D software shows the arrow cluster as "?", and I don't think it's mapping the right codes to the keys. Not sure what I am doing Change your region on the pc to korea then restart and it should fix that.I've had three lightsavers go through me and each time I've had to do that to reprogram the arrow keys. Edit: For clarificationShow ImageThank you... the place I eventually needed to set this was in the System Locale (Control Panel -> Region and Language -> Administrative tab -> Language for non-Unicode Programs -> Change system locale). It all works now...Here's some pictures of my board so I can stay on topic: Show ImageShow ImageShow ImageShow Image
...gross layout but grats
Quote from: Sifo on Tue, 05 January 2016, 13:25:12...gross layout but gratsHuh? you don't like the layout? OMG, I love it, it will look like this when I am finished with it: https://www.flickr.com/photos/jokrik/14952230998/Except I will have the Miami Nights GMK set on it, and then eventually SKIDATA!!!Edit: Thank you to both Sifo and Steezus. Also, thanks to sethk for the soldering.
sethk delivered??? grats...
Is there anyone in the Atlanta area that has a LSV2 with it working?For the life of me, I cannot get FLIP to work and get the mapping onto my keyboard. If we could meet somewhere in ATL, and you flash my keyboard, I will owe you a meal and sincere gratitude.
Well one issue I have, is the arrow keys when using the mapping program:http://duck0113.tistory.com/84All show up as "?" Instead of "Up", "Left", etc.http://i.imgur.com/UXfX8T1.png
Well one issue I have, is the arrow keys when using the mapping program:http://duck0113.tistory.com/84All show up as "?" Instead of "Up", "Left", etc.http://i.imgur.com/8GuNqDa.png
Great, that question is resolved. Another question on the keymapper:What do "T/L", "C/M", "MFN", Ly CH, Hot Key, and Key Lock mean?Is there documentation on this anywhere? I searched and did not find it.
I remember that I have to hold down a key on the keyboard while plugging it in, but I can't find anymore what specific key. Which one is it?
It looks like I may be getting my hands on a LSv2 kit. What is the difference between the old and new plates?
old one is more universal standard layout new plate is 1800 layout
Quote from: Steezus on Wed, 13 January 2016, 16:01:59It looks like I may be getting my hands on a LSv2 kit. What is the difference between the old and new plates?Dude, I love mine!!!
Quote from: Sifo on Wed, 13 January 2016, 16:03:18old one is more universal standard layout new plate is 1800 layout Thank you very much, I would be getting both plates but I think I'll opt for the 1800 layout since that is what I had on my RS96.Quote from: 64rky on Wed, 13 January 2016, 16:06:20Quote from: Steezus on Wed, 13 January 2016, 16:01:59It looks like I may be getting my hands on a LSv2 kit. What is the difference between the old and new plates?Dude, I love mine!!! That's very good to hear. This was my first dream board but I gave up hope on finding one but it now seems I finally get to own one.
Be prepared, if you have the alu bottom, the whole thing is heavy as he'll, which I love. Solid!!
Quote from: 64rky on Wed, 13 January 2016, 16:12:08Be prepared, if you have the alu bottom, the whole thing is heavy as he'll, which I love. Solid!!My body is ready.I have both the Orion v2 and TGR-Jane which both way a **** ton, I assumed this would be the same. The shop that Duck uses definitely has amazing quality, I'm not sure if he changed since the LSv2 but the anodizing on my Orion is superb. I expect nothing else for the LSv2.
Quote from: Steezus on Wed, 13 January 2016, 16:17:36Quote from: 64rky on Wed, 13 January 2016, 16:12:08Be prepared, if you have the alu bottom, the whole thing is heavy as he'll, which I love. Solid!!My body is ready.I have both the Orion v2 and TGR-Jane which both way a **** ton, I assumed this would be the same. The shop that Duck uses definitely has amazing quality, I'm not sure if he changed since the LSv2 but the anodizing on my Orion is superb. I expect nothing else for the LSv2.I get my Orion tonight
Quote from: 64rky on Wed, 13 January 2016, 16:21:12Quote from: Steezus on Wed, 13 January 2016, 16:17:36Quote from: 64rky on Wed, 13 January 2016, 16:12:08Be prepared, if you have the alu bottom, the whole thing is heavy as he'll, which I love. Solid!!My body is ready.I have both the Orion v2 and TGR-Jane which both way a **** ton, I assumed this would be the same. The shop that Duck uses definitely has amazing quality, I'm not sure if he changed since the LSv2 but the anodizing on my Orion is superb. I expect nothing else for the LSv2.I get my Orion tonight Very nice, that's rather fast!I'm debating on what switches shall go into my LSv2, I currently have a board with Vintage/Old Browns and another with 65g Zealios. The choices are unbearable. )
Is there any news on when v3 will arrive? Realised I´m gonna need like three so need to save some dough.
Quote from: Vaun on Thu, 14 January 2016, 13:22:15Is there any news on when v3 will arrive? Realised I´m gonna need like three so need to save some dough.LSv3 will be the next GB after the Octagon v2 is finished. However that is most likely near the end of the year the the LSv3 GB will start and won't arrive at your doorsteps until 2017.
Quote from: Steezus on Thu, 14 January 2016, 13:25:17Quote from: Vaun on Thu, 14 January 2016, 13:22:15Is there any news on when v3 will arrive? Realised I´m gonna need like three so need to save some dough.LSv3 will be the next GB after the Octagon v2 is finished. However that is most likely near the end of the year the the LSv3 GB will start and won't arrive at your doorsteps until 2017.Thanks for information.Hopefully it will start in summer.It's hard to find someone sell their lightsaver