Price Check- What's it Worth?

[Pwner]

Stock non-rgb K70 w/ reds.. what's the going rate for one of these?

[LiquidEvilGaming]

KUL 87 ES With
Original Box
Blue Top case replacement
Ducky Dyesub Bi Color Grey/Blue Keycaps
Cherry MX Browns

http://imgur.com/JKlmm7B

Debating what to ask for this one should nobody bite in my local area Via Want Ads/Craigslist etc.

[tullyvivi]

KUL 87 ES With
Original Box
Blue Top case replacement
Ducky Dyesub Bi Color Grey/Blue Keycaps
Cherry MX Browns

http://imgur.com/JKlmm7B

Debating what to ask for this one should nobody bite in my local area Via Want Ads/Craigslist etc.

this one reminds me of the topre 87 anniversary edition, looks sleek.

[tjweir]

Price check on a V1 Duck Octagon - Silver Case - vintage blacks.

Thanks!

[jerue]

1800 HAU caps? best/worst case scenario

[Photekq]

1800 HAU caps? best/worst case scenario

What condition are they in?

Please.. guys.. give conditions when you're asking for price checks. It helps a lot!

[jerue]

1800 HAU caps? best/worst case scenario

What condition are they in?

Please.. guys.. give conditions when you're asking for price checks. It helps a lot!

best condition possible (NIB) or worst condition possible. Just was curious about the price range for that. Not sure about ones I am getting since they need to be cleaned.

[Photekq]

best condition possible (NIB) or worst condition possible. Just was curious about the price range for that. Not sure about ones I am getting since they need to be cleaned.

Absolute NIB condition around $75-100 depending on who's buying/selling. Shined to hell and back (including the 1.75 shift and everything) maybe $25, although honestly shined over doubleshots are worth nothing in my opinion.

[Venatorious]

Hey could you guys price some of the boards in here?  I will be doing a large sale soon.

http://imgur.com/a/eudsa

One of the M122's is bolt modded, the square label is superbolt modded, and the omron board is USB converted.

Thanks!   

[effectiveduck]

What's a GMK Cyrillic (Base + Winkeyless + HHKB) set worth? No wear or shine.

Also how much would I be expected to pay for an OG Cherry Dyesub set?

[zennasyndroxx]

What's a GMK Cyrillic (Base + Winkeyless + HHKB) set worth? No wear or shine.

Also how much would I be expected to pay for an OG Cherry Dyesub set?

OG dyesub around 140.

what's the condition like?

[effectiveduck]

What's a GMK Cyrillic (Base + Winkeyless + HHKB) set worth? No wear or shine.

Also how much would I be expected to pay for an OG Cherry Dyesub set?

OG dyesub around 140.

what's the condition like?

Of my GMK Cyrillic? Used but no wear or shine.

I saw an OG Dyesubs set on sale for $350 from a few months ago, thought it was ridiculous, thanks for the clarification.

[effectiveduck]

Also vintage mx blacks?

[bocahgundul]

Also vintage mx blacks?

0.35 per switches

[fanpeople]

How much for one standard bocahgundul, slightly used but still pretty mint?

[bocahgundul]

How much for one standard bocahgundul, slightly used but still pretty mint?

I don't know about the modern 1 I think 0.30 per switches?

[Photekq]

OG dyesub around 140.

what's the condition like?

I think $140 is very low. I have personally never seen a dyesub set for that price, except heavily used ones on taobao.

I have always said around $250-350 for used depending on condition, with $350 being very good.

[quochung1989]

Agree with photekq. It's more 250$ at good conditions.

[effectiveduck]

Agree with photekq. It's more 250$ at good conditions.

OG dyesub around 140.

what's the condition like?

I think $140 is very low. I have personally never seen a dyesub set for that price, except heavily used ones on taobao.

I have always said around $250-350 for used depending on condition, with $350 being very good.

Bummer, looks like I'll be waiting a while.

[zennasyndroxx]

OG dyesub around 140.

what's the condition like?

I think $140 is very low. I have personally never seen a dyesub set for that price, except heavily used ones on taobao.

I have always said around $250-350 for used depending on condition, with $350 being very good.

Agree with photekq. It's more 250$ at good conditions.

Agree with photekq. It's more 250$ at good conditions.

OG dyesub around 140.

what's the condition like?

I think $140 is very low. I have personally never seen a dyesub set for that price, except heavily used ones on taobao.

I have always said around $250-350 for used depending on condition, with $350 being very good.

Bummer, looks like I'll be waiting a while.

Yeah, the ones which is around $140 isn't actually new or like new. They're like 70% good I guess? I've recently helped alienman82 proxied a set of OG Dyesubs from taobao and maybe you can ask him? I would say getting these OG caps from taobao is based on your luck.

[Photekq]

Bummer, looks like I'll be waiting a while.

I should have asked.. You do mean ANSI, right? ISO DE sets are around 50-100EUR.

[effectiveduck]

Bummer, looks like I'll be waiting a while.

I should have asked.. You do mean ANSI, right? ISO DE sets are around 50-100EUR.

Yea ANSI, I found some on Taobao ranging from $105 - $180 but it's really hard to determine the condition and I've never had any experiences with it so I'm really hesitant.

edit: It seems like the sellers have no transaction record either, or only 1.

[the big aristotle]

If I'm looking to trade up a full size Filco w/ blacks and some of the thin lasered PBT cherry beige caps to a HHKB. How much am I going to have to cough up to pay the difference? Preferably looking for someone who wants to go back to cherry from topre. I can take pics when I get back from class.

[dragonxx21]

Any ideas on the price of an IBM Model M model # 82G3295 but in an industrial gray shell?

[Bromono]

Any ideas on the price of an IBM Model M model # 82G3295 but in an industrial gray shell?

Condition?
Is that its original case or was it swapped?
Bolt Modded?

[dragonxx21]

Any ideas on the price of an IBM Model M model # 82G3295 but in an industrial gray shell?

Condition?
Is that its original case or was it swapped?
Bolt Modded?

Case is mint except for a small dent in the top right corner, slightly longer than a 1/4''.
AFAIK it's a swapped case.
I have no idea if it's bolt modded, but I don't believe it is.
Comes with blank 102 key with RGB modifiers. Extra accessories, original blank modifiers blah blah blah.

[-musubi]

Trade value of a bro stump vs a bbv2 (on average)? Are they equivalent, or one greater than the other?

[Hexterdude]

Trade value of a bro stump vs a bbv2 (on average)? Are they equivalent, or one greater than the other?

bbv2 is worth more for sure

[-musubi]

Trade value of a bro stump vs a bbv2 (on average)? Are they equivalent, or one greater than the other?

bbv2 is worth more for sure

How much more? I'm trying to gauge on what kind of caps I need to get in order to trade up to a bbv2, because we all know how hard they are to get outright

[riotonthebay]

It depends on the BBv2 and the Stump. These questions are always asked as if every BBv2 has the exact same trade value. Some of them are more rare than others, and same goes from Stumps. It also depends on who you trade with and what they're really looking for. Maybe the average BBv2 is more highly valued than the average Stump to the average person, but there are exceptions in all directions.

[FLFisherman]

Trade value of a bro stump vs a bbv2 (on average)? Are they equivalent, or one greater than the other?

bbv2 is worth more for sure

How much more? I'm trying to gauge on what kind of caps I need to get in order to trade up to a bbv2, because we all know how hard they are to get outright

I'd say two Stumps to one BBv2. However, as riot mentioned, it really depends on the colorway, and what either party in the trade is after.

[HoffmanMyster]

Trade value of a bro stump vs a bbv2 (on average)? Are they equivalent, or one greater than the other?

bbv2 is worth more for sure

How much more? I'm trying to gauge on what kind of caps I need to get in order to trade up to a bbv2, because we all know how hard they are to get outright

I'd say two Stumps to one BBv2. However, as riot mentioned, it really depends on the colorway, and what either party in the trade is after.

This puzzles me.  Stumps are far and away more rare, and equally interesting/appealing (IMO).  If someone asked me to give them 2 stumps in exchange for 1 BBV2 I would probably stop entertaining offers from them.  Unless it's a super rare V2, I suppose.

[FLFisherman]

Trade value of a bro stump vs a bbv2 (on average)? Are they equivalent, or one greater than the other?

bbv2 is worth more for sure

How much more? I'm trying to gauge on what kind of caps I need to get in order to trade up to a bbv2, because we all know how hard they are to get outright

I'd say two Stumps to one BBv2. However, as riot mentioned, it really depends on the colorway, and what either party in the trade is after.

This puzzles me.  Stumps are far and away more rare, and equally interesting/appealing (IMO).  If someone asked me to give them 2 stumps in exchange for 1 BBV2 I would probably stop entertaining offers from them.  Unless it's a super rare V2, I suppose.

And I personally wouldn't accept three Stumps for one V2, but that's why it's hard to give a price check on trade value.

My estimate was based off of aftermarket values that I've gleaned from eBay, GH Classifieds, and reddit's mechmarket.

[alienman82]

removed.

[Bromono]

Trade value of a bro stump vs a bbv2 (on average)? Are they equivalent, or one greater than the other?

bbv2 is worth more for sure

How much more? I'm trying to gauge on what kind of caps I need to get in order to trade up to a bbv2, because we all know how hard they are to get outright

I'd say two Stumps to one BBv2. However, as riot mentioned, it really depends on the colorway, and what either party in the trade is after.

This puzzles me.  Stumps are far and away more rare, and equally interesting/appealing (IMO).  If someone asked me to give them 2 stumps in exchange for 1 BBV2 I would probably stop entertaining offers from them.  Unless it's a super rare V2, I suppose.

I think its the same as 420s vs skulls.

People don't value 420s as much as f2 skulls.

Even though the 420s are rarer and probably not mass made like the f2s.

I aint complaining though. I just wish there where more 420s on the market.

[SpAmRaY]

Price for desoldered mx clears?

I'd say it depends on age and condition and if they've got diodes that have to be removed but ballpark if in good condition between $0.30-$0.40/switch the only time I could see being higher is if someone just really wanted older clears for some reason as brand new ones are ~$0.50/switch

[-musubi]

Trade value of a bro stump vs a bbv2 (on average)? Are they equivalent, or one greater than the other?

How about Bro SLS caps?

bbv2 is worth more for sure

How much more? I'm trying to gauge on what kind of caps I need to get in order to trade up to a bbv2, because we all know how hard they are to get outright

I'd say two Stumps to one BBv2. However, as riot mentioned, it really depends on the colorway, and what either party in the trade is after.

This puzzles me.  Stumps are far and away more rare, and equally interesting/appealing (IMO).  If someone asked me to give them 2 stumps in exchange for 1 BBV2 I would probably stop entertaining offers from them.  Unless it's a super rare V2, I suppose.

I think its the same as 420s vs skulls.

People don't value 420s as much as f2 skulls.

Even though the 420s are rarer and probably not mass made like the f2s.

I aint complaining though. I just wish there where more 420s on the market.

[dragonxx21]

So does anyone up a price for the model M I mentioned earlier?

[alienman82]

removed.

[azhdar]

cherry G80-5000HAMPO/02 ANSI f keys on the side, used price little shine on caps (no box)

G80-1191HBU Similar condition

Thanks

I'm confused about this post, can you clarify?

5000HAMPO is the portuguese ISO version with the windows key, this version with little shine and no box would be 200-300 € range

[alienman82]

removed.

[azhdar]

cherry G80-5000HAMPO/02 ANSI f keys on the side, used price little shine on caps (no box)

G80-1191HBU Similar condition

Thanks

I'm confused about this post, can you clarify?

5000HAMPO is the portuguese ISO version with the windows key, this version with little shine and no box would be 200-300 € range

Oh then the listing I've seen must be incorrect.  Pictures appear to be the ansi one but the title says hampo. 

Then ANSI F-Key would be in the upper 300$ range (for that condition)

[alienman82]

removed.

[mason]

Beige 1800 set? Some shine and a couple scratches.
NIB ANSI dyesubs?

[appleonama]

How much does an 'industrial model m' and 'NCR G81-3077' usually go far?

[appleonama]

Beige 1800 set? Some shine and a couple scratches.
NIB ANSI dyesubs?

1800 set used about 30-45

nib ansi 70?

[azhdar]

Beige 1800 set? Some shine and a couple scratches.
NIB ANSI dyesubs?

1800 set used about 30-45

nib ansi 70?

I don't know the prices but that seems very low.

[appleonama]

Beige 1800 set? Some shine and a couple scratches.
NIB ANSI dyesubs?

1800 set used about 30-45

nib ansi 70?

I don't know the prices but that seems very low.

I was thinking taobao prices but you are right I'd say add 25-30 extra to each of those

[Photekq]

Beige 1800 set? Some shine and a couple scratches.
NIB ANSI dyesubs?

1800 set probably about $40 if the right shift is still in fairly decent condition. Less if that key is also very shiny.

For the past year or so I've always said that a NIB ANSI dyesub board is worth $500. I still believe this is correct.

[jerue]

Truly Ergonomic 227 with "firm" switches? I think this is MX Clears.