Author Topic: CU7  (Read 86190 times)

0 Members and 1 Guest are viewing this topic.

Offline CAPS UNLOCKED

  • Thread Starter
  • Posts: 538
  • Location: United Kingdom
    • capsunlocked
CU7
« on: Mon, 16 March 2020, 08:41:17 »
We are unable to post much text on GeekHack so we will just link to the store page: https://caps-unlocked.com/cu7/


Renders:


237945-0
237947-1
237949-2
237951-3
237953-4
237956-5
237958-6
« Last Edit: Fri, 23 October 2020, 06:48:10 by iamtootallforthis »

Offline Jaltr

  • Posts: 146
Re: [IC] CU7
« Reply #1 on: Mon, 16 March 2020, 08:44:44 »
This is very clean!

The form doesnt seem to accept my email. Is this a bug?

Edit: Got the form to work from my pc!

Sent from my SM-J415G using Tapatalk
« Last Edit: Mon, 16 March 2020, 08:48:09 by Jaltr »

Offline CAPS UNLOCKED

  • Thread Starter
  • Posts: 538
  • Location: United Kingdom
    • capsunlocked
Re: [IC] CU7
« Reply #2 on: Mon, 16 March 2020, 08:50:28 »
This is very clean!

The form doesnt seem to accept my email. Is this a bug?

Edit: Got the form to work from my pc!

Sent from my SM-J415G using Tapatalk


Glad you like it! :)


What's the error message?

Offline Jaltr

  • Posts: 146
Re: [IC] CU7
« Reply #3 on: Mon, 16 March 2020, 08:52:25 »
This is very clean!

The form doesnt seem to accept my email. Is this a bug?

Edit: Got the form to work from my pc!

Sent from my SM-J415G using Tapatalk


Glad you like it! :)


What's the error message?
This is what showed up on my phone.

Sent from my SM-J415G using Tapatalk


Offline Visionaire

  • Posts: 613
Re: [IC] CU7
« Reply #4 on: Mon, 16 March 2020, 08:53:15 »
VERY clean. I love this look. Answer may be 'no'... but any chance of a poly or acrylic bottom with some underglow? Would LOVE to see that.

Offline CAPS UNLOCKED

  • Thread Starter
  • Posts: 538
  • Location: United Kingdom
    • capsunlocked
Re: [IC] CU7
« Reply #5 on: Mon, 16 March 2020, 09:04:37 »
VERY clean. I love this look. Answer may be 'no'... but any chance of a poly or acrylic bottom with some underglow? Would LOVE to see that.


Glad you like it! Sorry no underglow in this version!


This is very clean!

The form doesnt seem to accept my email. Is this a bug?

Edit: Got the form to work from my pc!

Sent from my SM-J415G using Tapatalk


Glad you like it! :)


What's the error message?
This is what showed up on my phone.
Show Image


Sent from my SM-J415G using Tapatalk


 


I will look into this, thanks for letting me know! :)

Offline Zeelobby

  • Posts: 926
Re: [IC] CU7
« Reply #6 on: Mon, 16 March 2020, 09:16:37 »
Would be a nice addition for any 60/65 setup. Def interested

Offline Jaltr

  • Posts: 146
Re: [IC] CU7
« Reply #7 on: Mon, 16 March 2020, 09:18:15 »
Quick question, how can I configure the rotary encoder for volume or something else?

Sent from my SM-J415G using Tapatalk


Offline CAPS UNLOCKED

  • Thread Starter
  • Posts: 538
  • Location: United Kingdom
    • capsunlocked
Re: [IC] CU7
« Reply #8 on: Mon, 16 March 2020, 09:38:08 »
Quick question, how can I configure the rotary encoder for volume or something else?

Sent from my SM-J415G using Tapatalk




The function of the encoder and keys can be customised using QMK.


Would be a nice addition for any 60/65 setup. Def interested


Thanks! :D 

Offline neutralstate

  • Posts: 152
Re: [IC] CU7
« Reply #9 on: Mon, 16 March 2020, 09:46:05 »
would you consider adding regular full size usb ports instead of usb c? probably more useful for things like usb drives and some such.

Offline Zeelobby

  • Posts: 926
Re: [IC] CU7
« Reply #10 on: Mon, 16 March 2020, 09:53:47 »
would you consider adding regular full size usb ports instead of usb c? probably more useful for things like usb drives and some such.
I agree with this actually. Having just usb-c means I'm attaching a dongle to this and it's getting ugly. Where alternatively this could be a pretty awesome usb-a hub. Many peripherals still end in usb-a. And most keyboard cables do as well (because besides MacBooks most PCs are still usb-c limited).

I may still consider this purely for it's macropad capabilities. But at that point I'd say cut the extra ports and save me some money. No ports or usb-a ports def makes the most sense.

Offline bobgr8

  • Posts: 139
Re: [IC] CU7
« Reply #11 on: Mon, 16 March 2020, 12:08:15 »
Would like one without the extra ports, takes away from the minimalism



Offline Starston3

  • Posts: 276
  • Location: Bay Area
Re: [IC] CU7
« Reply #12 on: Mon, 16 March 2020, 12:20:40 »
Like the extra ports as it doubles as a hub. very interested in see this come to market.

Offline bisoromi

  • Formerly Duwang
  • Posts: 219
  • Location: D[M]V
  • owo
Re: [IC] CU7
« Reply #13 on: Mon, 16 March 2020, 12:42:13 »
Quote
We are unable to post much text on GeekHack so we will just link to the store page

Is this a joke
(credits to Kokaloo)

Offline CAPS UNLOCKED

  • Thread Starter
  • Posts: 538
  • Location: United Kingdom
    • capsunlocked
Re: [IC] CU7
« Reply #14 on: Mon, 16 March 2020, 13:12:19 »
Quote
We are unable to post much text on GeekHack so we will just link to the store page

Is this a joke


No, the formatting doesn't work. We tried posting but the text either the text is really small with no paragraphs or really large with no paragraphs. This has been happening a lot recently, we don't know why.

Like the extra ports as it doubles as a hub. very interested in see this come to market.

 


Thanks.


would you consider adding regular full size usb ports instead of usb c? probably more useful for things like usb drives and some such.
I agree with this actually. Having just usb-c means I'm attaching a dongle to this and it's getting ugly. Where alternatively this could be a pretty awesome usb-a hub. Many peripherals still end in usb-a. And most keyboard cables do as well (because besides MacBooks most PCs are still usb-c limited).

I may still consider this purely for it's macropad capabilities. But at that point I'd say cut the extra ports and save me some money. No ports or usb-a ports def makes the most sense.


No, sorry this is because we want the product to be future-proof. We also have other plans etc. that this macro pad would work well with.   We are looking at offering short USB-C to A cables as an optional extra.

Offline Dissitesuxba11s

  • Posts: 137
  • Location: The Silver
Re: [IC] CU7
« Reply #15 on: Mon, 16 March 2020, 13:53:11 »
Love the idea. Definitely interested.

For the USB hub, does it matter which one will be the "master" output port to your computer and which ones will be for your devices?

Offline productkun

  • Posts: 135
Re: [IC] CU7
« Reply #16 on: Mon, 16 March 2020, 14:05:57 »
Would love to pick this up!

Offline Penguindropings

  • Posts: 15
Re: [IC] CU7
« Reply #17 on: Mon, 16 March 2020, 14:21:16 »
Definitely interested

Offline Zeelobby

  • Posts: 926
Re: [IC] CU7
« Reply #18 on: Mon, 16 March 2020, 14:25:16 »

would you consider adding regular full size usb ports instead of usb c? probably more useful for things like usb drives and some such.
I agree with this actually. Having just usb-c means I'm attaching a dongle to this and it's getting ugly. Where alternatively this could be a pretty awesome usb-a hub. Many peripherals still end in usb-a. And most keyboard cables do as well (because besides MacBooks most PCs are still usb-c limited).

I may still consider this purely for it's macropad capabilities. But at that point I'd say cut the extra ports and save me some money. No ports or usb-a ports def makes the most sense.


No, sorry this is because we want the product to be future-proof. We also have other plans etc. that this macro pad would work well with.   We are looking at offering short USB-C to A cables as an optional extra.

Yeah, I used to understand this, back when i thought USB-C was right around the corner on peripherals, but it's not, and doesn't look like it's going to be, for a while. By then you'll probably have R2/R3 of this coming out. LoL.

That said, with addon adapters I may still be interested, but it'll mess with the look for sure. Will follow along though.

Offline noodleman

  • Posts: 130
Re: [IC] CU7
« Reply #19 on: Mon, 16 March 2020, 17:46:14 »
would you consider adding regular full size usb ports instead of usb c? probably more useful for things like usb drives and some such.
I agree with this actually. Having just usb-c means I'm attaching a dongle to this and it's getting ugly. Where alternatively this could be a pretty awesome usb-a hub. Many peripherals still end in usb-a. And most keyboard cables do as well (because besides MacBooks most PCs are still usb-c limited).

I may still consider this purely for it's macropad capabilities. But at that point I'd say cut the extra ports and save me some money. No ports or usb-a ports def makes the most sense.

+1 would also prefer usb-a passthrough instead.

Offline DukeEsquire

  • Posts: 596
Re: [IC] CU7
« Reply #20 on: Mon, 16 March 2020, 18:00:45 »
Having one USB-A would be nice. Most of my stuff is not USB-C yet.

Offline rennzz

  • Posts: 2
Re: [IC] CU7
« Reply #21 on: Mon, 16 March 2020, 18:08:53 »
Super in for this!

Offline ninlawen

  • Posts: 6
Re: [IC] CU7
« Reply #22 on: Mon, 16 March 2020, 18:27:24 »
Is there room for a weight inside? I'd be a bit concerned about cables pulling the back down, lifting the front. A port in front might be nice.

Looking like a nifty little pad!

Offline thethomaszhou

  • Posts: 9
Re: [IC] CU7
« Reply #23 on: Mon, 16 March 2020, 20:01:40 »
🤤 my god that's beautiful

Quote
No, sorry this is because we want the product to be future-proof. We also have other plans etc. that this macro pad would work well with.   We are looking at offering short USB-C to A cables as an optional extra.

usb c to a adapters i think are a better idea than short cables

i was also wondering if the pass through ports are gonna be usb 3.0 or usb 3.1?

Offline CF73

  • Posts: 46
  • Location: JP
Re: [IC] CU7
« Reply #24 on: Tue, 17 March 2020, 02:57:23 »
Looks nice.
What rotary encoder does it use? Is it the EC11 or something else?

Offline harlekein

  • Posts: 464
Re: [IC] CU7
« Reply #25 on: Tue, 17 March 2020, 06:22:45 »
This looks great. USB-C hub is a great idea.

Offline Zuki

  • Posts: 0
  • Location: United Kingdom
Re: [IC] CU7
« Reply #26 on: Tue, 17 March 2020, 06:57:01 »
Looks brilliant, will be keeping a close eye.

Offline Artemie

  • Posts: 99
  • Location: Singapore
  • Don't Let Your Memes Be Dreams
Re: [IC] CU7
« Reply #27 on: Tue, 17 March 2020, 09:12:48 »
This looks clean. Looking forward to it.
| 420CL | Fanoe | Porpoise | KFE R1 Silver| MxSS |  is0 Pink & Silver | HBCP Polycarbonate | Matrix 2.0 Additional Purple | TGR Police | Singa Jaguar Green | KFE R2 Blue | RS so lit | Dolch CR Black | Jelly 60 Blue | Belle en Rose | Kei R2 Olive | Dalco 959 Mini | Aripeko
More
Boards in GB: | IU board |
Previous Boards: QXP | Singa  | UTD | Taichi | Jane v2 Red | Jane v2 CE

Offline actualglacier

  • ¯\_(ツ)_/¯
  • Posts: 93
  • 😳
Re: [IC] CU7
« Reply #28 on: Tue, 17 March 2020, 09:14:27 »
Macropads usually never catch my attention but this one might just change that. Love this!
actualglacier on youtube


Offline Jaltr

  • Posts: 146
Re: [IC] CU7
« Reply #29 on: Tue, 17 March 2020, 09:32:59 »
Usb c, usb a, and a 3.5mm headphone jack. Would that be overkill?

Sent from my SM-J415G using Tapatalk


Offline Zeelobby

  • Posts: 926
Re: [IC] CU7
« Reply #30 on: Tue, 17 March 2020, 09:40:42 »
Usb c, usb a, and a 3.5mm headphone jack. Would that be overkill?

Sent from my SM-J415G using Tapatalk
Even this I like better. Usbc for source, 2 stacked usb a, and headphone would be endgame. Lol

Offline Jaltr

  • Posts: 146
Re: [IC] CU7
« Reply #31 on: Tue, 17 March 2020, 09:42:05 »
Usb c, usb a, and a 3.5mm headphone jack. Would that be overkill?

Sent from my SM-J415G using Tapatalk
Even this I like better. Usbc for source, 2 stacked usb a, and headphone would be endgame. Lol
Not much of an audiophile, but would love to have a hub for everything + macros

Sent from my SM-J415G using Tapatalk


Offline Ryanticz

  • Posts: 31
Re: [IC] CU7
« Reply #32 on: Tue, 17 March 2020, 09:59:13 »
First macropad I've audibly said woah for. Looks awesome and definitely interested in this!

Offline chanceofthat

  • Posts: 7
Re: [IC] CU7
« Reply #33 on: Tue, 17 March 2020, 10:16:16 »
As someone who is all in on USB-C, I love the hub. It’s super frustrating when a peripheral takes up a USB-C port and doesn’t add one.


Sent from my iPhone using Tapatalk

Offline growler

  • Posts: 246
Re: [IC] CU7
« Reply #34 on: Tue, 17 March 2020, 12:01:03 »
As someone who is all in on USB-C, I love the hub. It’s super frustrating when a peripheral takes up a USB-C port and doesn’t add one.


Sent from my iPhone using Tapatalk
Well said

growler

Don't just stare at it ...

Offline Zeelobby

  • Posts: 926
Re: [IC] CU7
« Reply #35 on: Tue, 17 March 2020, 12:27:10 »
I mean sure. Add one. But where are all these usb-c mice, keyboards and thumb drives everyone is using? I mean the only common usb-c to usb-c/hardwire cables I ever see now are for phone charging.
« Last Edit: Tue, 17 March 2020, 18:40:39 by Zeelobby »

Offline gautema

  • Posts: 20
  • Location: Oslo, Norway
Re: [IC] CU7
« Reply #36 on: Tue, 17 March 2020, 14:43:27 »
I need this in my life. I’ll work hard to get one.

Offline kokugatsu

  • Posts: 148
  • Location: East of Eden
Re: [IC] CU7
« Reply #37 on: Thu, 19 March 2020, 00:58:33 »
I dig it, would just prefer to see USB-A ports, since all my cables are USB-A to micro/C

Offline OmniSzron

  • Posts: 154
  • Location: Warsaw, Poland
Re: [IC] CU7
« Reply #38 on: Thu, 19 March 2020, 10:11:03 »
This thing looks beautiful. With the proper resistance on the dial it could be glorious.

Any info on charging speeds and data bandwidth with these USB-C pass-throughs?

Is there any way to machine the USB-C port holes in the back to better fit the ports? Right now it looks like they were meant for USB-A, with a lot of space around the ports.

Quote
Usb c, usb a, and a 3.5mm headphone jack. Would that be overkill?
That would require putting a DAC into this thing, which is a whole new area of expertise.
Fox Lab Key 65 split space

Offline donutcat

  • * Vendor
  • Posts: 1185
  • Location: Shelby, NC
  • I have ideas. Sometimes they're even good ideas.
    • Donut Cables
Re: [IC] CU7
« Reply #39 on: Thu, 19 March 2020, 20:36:23 »
This thing looks beautiful. With the proper resistance on the dial it could be glorious.

Any info on charging speeds and data bandwidth with these USB-C pass-throughs?

Is there any way to machine the USB-C port holes in the back to better fit the ports? Right now it looks like they were meant for USB-A, with a lot of space around the ports.

Quote
Usb c, usb a, and a 3.5mm headphone jack. Would that be overkill?
That would require putting a DAC into this thing, which is a whole new area of expertise.

Could just do a passthrough, but then you've still got to worry about noise and you've added another host cable.

Offline brianisafk

  • Posts: 3
Re: [IC] CU7
« Reply #40 on: Thu, 19 March 2020, 21:59:56 »
🤤 my god that's beautiful

Quote
No, sorry this is because we want the product to be future-proof. We also have other plans etc. that this macro pad would work well with.   We are looking at offering short USB-C to A cables as an optional extra.

usb c to a adapters i think are a better idea than short cables

i was also wondering if the pass through ports are gonna be usb 3.0 or usb 3.1?

This is my question. If its just usb 2, then can't use it for power or file transfer...

Offline donutcat

  • * Vendor
  • Posts: 1185
  • Location: Shelby, NC
  • I have ideas. Sometimes they're even good ideas.
    • Donut Cables
Re: [IC] CU7
« Reply #41 on: Thu, 19 March 2020, 23:07:50 »
🤤 my god that's beautiful

Quote
No, sorry this is because we want the product to be future-proof. We also have other plans etc. that this macro pad would work well with.   We are looking at offering short USB-C to A cables as an optional extra.

usb c to a adapters i think are a better idea than short cables

i was also wondering if the pass through ports are gonna be usb 3.0 or usb 3.1?

This is my question. If its just usb 2, then can't use it for power or file transfer...

Yeah power is more limited with C2.0 but I've never seen issues with file transfer in my testing of C2.0 to C2.0 cables.

Offline Rew23

  • Posts: 42
Re: [IC] CU7
« Reply #42 on: Sat, 21 March 2020, 11:14:57 »
Been looking for a solid macro pad for awhile. One with a rotary encoder would be great!

Offline Shutter_Shock

  • Posts: 292
  • Location: Seattle, WA, USA
Re: [IC] CU7
« Reply #43 on: Sat, 21 March 2020, 12:03:40 »
I am pro USB-C. It's a more future-proof connector. Plus the cost of buying a few USB-A to USB-C cables pales in comparison to a lot of the boards some of us own anyway.

Offline darthg0d

  • Posts: 4
Re: [IC] CU7
« Reply #44 on: Wed, 25 March 2020, 14:24:38 »
Looks cool. I'm in for one when the time comes. I was looking for a device with 5 keys and a volume knob just for media controls. But this will work awesome too.

Offline amarotea

  • Posts: 22
Re: [IC] CU7
« Reply #45 on: Wed, 25 March 2020, 22:26:36 »
Looks really cool and would love to use it as a media switch pad. It would be amazing if you could scrub through premiere pro or after effects with it.

Offline Blvck.-

  • Posts: 27
  • Location: Bay Area, CA
Re: [IC] CU7
« Reply #46 on: Fri, 27 March 2020, 17:31:54 »
I'm in.

Offline CrazyAssMonkey

  • Posts: 340
  • Location: The Sovereign States of The Jungle
Re: [IC] CU7
« Reply #47 on: Fri, 27 March 2020, 18:52:48 »
This is quite interesting, I was looking at the Keebwerk Nano but the hub possibilities in this one interest me plus I do prefer a knob to a slider.

Offline amuri99

  • Posts: 29
Re: [IC] CU7
« Reply #48 on: Tue, 07 April 2020, 19:59:00 »
When does GB start? I'm waiting desperately.

Offline syke

  • Posts: 63
Re: [IC] CU7
« Reply #49 on: Sun, 24 May 2020, 12:55:25 »
Clean looking. Keeping it all USB C is a great start.

Offline s3vv4

  • Posts: 148
Re: [IC] CU7
« Reply #50 on: Sun, 24 May 2020, 12:57:49 »
This looks really cool. I have one question: What does the hole on the knob do?

Offline OmniSzron

  • Posts: 154
  • Location: Warsaw, Poland
Re: [IC] CU7
« Reply #51 on: Sun, 24 May 2020, 17:31:26 »
This looks really cool. I have one question: What does the hole on the knob do?
I assume it's where you screw it in, so that it doesn't fall off.
Fox Lab Key 65 split space

Offline PureLuck

  • Posts: 21
Re: [IC] CU7
« Reply #52 on: Mon, 25 May 2020, 00:59:34 »
Very clean looking, love the look!

Hope to see it on GB soon :)

Offline loddee

  • Posts: 7
Re: [IC] CU7
« Reply #53 on: Mon, 25 May 2020, 01:58:12 »
Definitely interested! Really like the fact that it's only usb-c.

Offline itsmartin

  • Posts: 95
  • Location: Australia
Re: [IC] CU7
« Reply #54 on: Mon, 25 May 2020, 02:08:43 »
Definitely interested! Really like the fact that it's only usb-c.

I hate to be the bearer of bad news, but they are changing that and only the central port is USB C, with the outside ports changing to USB A.

There is a message in their Discord for this one that says:

"Whilst it was our initial goal to use USB-C 3.1 we would also like to launch the group buy sooner rather than later and have decided to switch to USB-A 2.0. "

And:

"Will all of the ports be changing to USB-A 2.0?  The central port will remain as USB-C 2.0, only the port on the left and right are changing."

Offline elmo

  • Posts: 412
  • Location: Hamburg, Germany
  • Hello I like keyboards
    • Elmo's keyboards
Re: [IC] CU7
« Reply #55 on: Mon, 25 May 2020, 06:39:00 »
Definitely interested! Really like the fact that it's only usb-c.

I hate to be the bearer of bad news, but they are changing that and only the central port is USB C, with the outside ports changing to USB A.

There is a message in their Discord for this one that says:

"Whilst it was our initial goal to use USB-C 3.1 we would also like to launch the group buy sooner rather than later and have decided to switch to USB-A 2.0. "

And:

"Will all of the ports be changing to USB-A 2.0?  The central port will remain as USB-C 2.0, only the port on the left and right are changing."

tbh I actually like that a lot more with the outside ports being normal usb-a. with usb-c you would have to buy all new c-to-c cables.

Offline Nvr_Smile

  • Posts: 20
Re: [IC] CU7
« Reply #56 on: Mon, 25 May 2020, 12:50:55 »
Definitely interested! Really like the fact that it's only usb-c.

I hate to be the bearer of bad news, but they are changing that and only the central port is USB C, with the outside ports changing to USB A.

There is a message in their Discord for this one that says:

"Whilst it was our initial goal to use USB-C 3.1 we would also like to launch the group buy sooner rather than later and have decided to switch to USB-A 2.0. "

And:

"Will all of the ports be changing to USB-A 2.0?  The central port will remain as USB-C 2.0, only the port on the left and right are changing."

tbh I actually like that a lot more with the outside ports being normal usb-a. with usb-c you would have to buy all new c-to-c cables.

I also agree with this. Would make it pretty easy to use as a charging station. I do wonder if you could use it as a usb hub though, for plugging in usb drives and such.

Offline cptbubbles

  • Posts: 15
  • Location: UK / South Korea
Re: [IC] CU7
« Reply #57 on: Mon, 25 May 2020, 12:58:21 »
This has me interested. I'd love to know if the macropad will be sufficiently weighted so that having a couple USB cables plugged won't make it move around.

Offline frob

  • Posts: 3
Re: [IC] CU7
« Reply #58 on: Mon, 25 May 2020, 13:06:27 »
Looks good. Are you planning for different colors? This won't match my setup. Maybe some cream/gray color?

Offline hottrout

  • Posts: 1487
  • Location: Norn Iron
  • I'd Hit Dat Key
Re: [IC] CU7
« Reply #59 on: Tue, 26 May 2020, 02:44:49 »
Could be a nice addition to a desk.  Interested.
Current Daily Driver : Virgo - Ultramarine - Standard Lube  |  WTB : Topre Realforce Hi-Pro, please PM me if you have one for sale.

Systems -
More
Work |i9-7940x@4.8ghz|32GB(3600)|STRIX-RTX3090Ti|Bespoke Water, 360m Rad|X299 Prime Deluxe|EK x299 Monoblock|Optane 900p|2x1TB 960 Pro|2x10TB Helium|Dell U3415W + Dell UP2116Q
Home |i9-13900ks|32GB(7300)|Rog RTX 4090|Asus Z790 Rog Maximus Hero|Torrent Air|2TB 990 Pro|2TB 990 Pro|Dell AW3423DW QOLED|NEC MultiSync|Drobo16TB
Mining |i5-7500|16GB(2400)|H110 Pro BTC+|8x1080Ti|2x1650Watt PSU

Plus 40 years of collecting retro computers, consoles, games, peripherals, mainframes and mini's as well as their software, keyboards, games and manuals. 100's of systems including every Amiga model made
  Keyboards -
More
IBM 3101 | IBM 3276 | IBM 5150 | IBM ModelM | Dictaphone Dual Display | Vintage Cherrys (1982 onwards, just about all of them) | Commodore (all of them) | Nixdorf | Siemens | ICL | Apple (all of them) | Filco Majistouch | KBDFans 5degree - Chocolate | Rama M6-B - Moon | CA66 Silver | ClueBoard Graphite/PC | Varmilo VA69M Silver | E7-V1 SE Yellow | Rama U-80 Space Grey | VN66 Navy | BOCC Frosted Polycarbonate | Rama M10-C Midnight | FLX Virgo Teal & Black | Rama M60-A LYN Kuro | Space65 CyberVoyager WhiteGold | Space65 CyberVoyager Terminal | Hyper 7 | Clarabelle Sandblasted Polycarbonate | Elongate Mini 1800 Blue | Petrichor 1800 Red | Vulcan Maja Ergo Green | Think6.5v2 RoboCop | Jacky Bear 65% E-White | Sakabato CB87 TKL Champagne | KCK KY-01 Aquamarine | Jae J-01 F&F E-White & Copper | S7.7 E-White | The Adélie Blue | NIX OxalyS80 LE Dark Polycarbonate | Mesa TKL E-White | Smith & Rune IRON180 Graen/Brass | Skog Reboot Desert | CU7 Black | ROTR Silver & Copper | RAMA Kara Soya | Grid 650 E-White | SIX5 LE Aluminium & Gold | OwLab Voice65 Grey | BOX 75 Black Stainless Steel | Onyx E-White | Ikki68 BT Charcoal | Smith & Rune Iron 165 Graphite & Stainless Steel | Epoch 80% Black | RAMA Thermal SEQ2 Kuro | Paper Crane Gerald65 SE PC & CF | CB1800 ZANBATO | GLiTCH | Eclipse Grey & SS | TGR Tomo Silver | Mountain Ergo Black | Keebwerk NASU Black/Red | Phase One 65 Grey | Command TKL Fire | Chalice Frosted | VIENDI 8L Shadow | | Vulcan Maja PC | Glove 80 | Matrix 8XV 3.0 Starry Night | Sagittarius Grey Lilac | AKB OGR & Numpad Dolch | Type K Black

Offline loddee

  • Posts: 7
Re: [IC] CU7
« Reply #60 on: Tue, 26 May 2020, 05:10:24 »
Definitely interested! Really like the fact that it's only usb-c.

I hate to be the bearer of bad news, but they are changing that and only the central port is USB C, with the outside ports changing to USB A.

There is a message in their Discord for this one that says:

"Whilst it was our initial goal to use USB-C 3.1 we would also like to launch the group buy sooner rather than later and have decided to switch to USB-A 2.0. "

And:

"Will all of the ports be changing to USB-A 2.0?  The central port will remain as USB-C 2.0, only the port on the left and right are changing."

tbh I actually like that a lot more with the outside ports being normal usb-a. with usb-c you would have to buy all new c-to-c cables.

I also agree with this. Would make it pretty easy to use as a charging station. I do wonder if you could use it as a usb hub though, for plugging in usb drives and such.

Oh well, that sucks for me but still interested though!

Offline syke

  • Posts: 63
Re: [IC] CU7
« Reply #61 on: Mon, 01 June 2020, 06:41:24 »
Awww... that's a downer. I would much prefer USB C. USB A would be too hideous looking.

Offline CrlaoSvloadr

  • Posts: 50
  • Location: Canada
Re: [IC] CU7
« Reply #62 on: Mon, 01 June 2020, 14:58:31 »
Absolutely love everything about this! Checking off every aspect of a macro-pad that i'm after, i'm 100% hopping on board!
Looking forward to hearing more on this :)

Definitely interested! Really like the fact that it's only usb-c.
I hate to be the bearer of bad news, but they are changing that and only the central port is USB C, with the outside ports changing to USB A.

There is a message in their Discord for this one that says:

"Whilst it was our initial goal to use USB-C 3.1 we would also like to launch the group buy sooner rather than later and have decided to switch to USB-A 2.0. "

And:

"Will all of the ports be changing to USB-A 2.0?  The central port will remain as USB-C 2.0, only the port on the left and right are changing."


« Last Edit: Mon, 01 June 2020, 15:03:46 by CrlaoSvloadr »


Offline musicgecko

  • Posts: 26
Re: [IC] CU7
« Reply #63 on: Tue, 16 June 2020, 16:50:45 »
Excited for this! Any timeline for when GB will happen?

Offline izroll

  • Posts: 5
  • Location: Atlanta, GA
Re: [IC] CU7
« Reply #64 on: Tue, 16 June 2020, 18:17:39 »
Definitely on board if it means I can have my keeb. mouse, and macropad connected via 1 port!

Offline grundlemere

  • Posts: 253
  • Location: Washington, DC
Re: [IC] CU7
« Reply #65 on: Wed, 17 June 2020, 08:21:01 »
Why buy a hub when you could buy a macropad knobby hub? Serious question.

Offline syke

  • Posts: 63
Re: [IC] CU7
« Reply #66 on: Wed, 17 June 2020, 10:15:39 »
any new updates on this?

Offline Solotov

  • Posts: 366
Re: [IC] CU7
« Reply #67 on: Wed, 17 June 2020, 10:59:53 »
This has been too long...
Flex is love, flex is life.

Offline Mekanist

  • Posts: 30
    • Archetype
Re: [IC] CU7
« Reply #68 on: Wed, 17 June 2020, 22:20:11 »
Any updates on this? I really love the simplistic design.

Offline fatherfork

  • Posts: 3
Re: [IC] CU7
« Reply #69 on: Wed, 24 June 2020, 08:19:09 »
On their discord capsunlocked has said the GB will start August 1st.

Offline davydav

  • Posts: 10
Re: [IC] CU7
« Reply #70 on: Wed, 08 July 2020, 05:42:02 »
Can I have the discord link ? Can't find it anywhere... wanted to ask a question about the resistance of the knob, if there is any ?

Offline yuutsu

  • Posts: 54
  • Location: Kentucky, USA
  • Consumer of Brioche Loaf
    • Desktop Designs
Re: [IC] CU7
« Reply #71 on: Fri, 24 July 2020, 17:41:46 »
I want this, I NEED THIS.

Offline fatherfork

  • Posts: 3
Re: [IC] CU7
« Reply #72 on: Fri, 24 July 2020, 18:22:37 »
They just announced it has been delayed. No word yet to when.

Offline spyruf

  • Posts: 109
  • Location: USA
Re: [IC] CU7
« Reply #73 on: Fri, 24 July 2020, 23:06:07 »
this is awesome

Offline dwaalspoor98

  • Posts: 5
Re: [IC] CU7
« Reply #74 on: Sun, 26 July 2020, 05:42:29 »
I need this  :thumb:, subscribed will check my mailbox daily and will order it as soon as it goes live ;)

Offline desipalen

  • Posts: 30
Re: [IC] CU7
« Reply #75 on: Sun, 26 July 2020, 08:44:41 »
That's neat. Wish I could justify participating.

Sent from my Pixel 3 XL using Tapatalk


Offline EMC Labs

  • Posts: 447
Re: [IC] CU7
« Reply #76 on: Sun, 02 August 2020, 08:03:53 »
How is this mounted?

Offline JSaintS

  • Formerly eNrageDSainT
  • Posts: 840
  • Location: Here, there... mostly there.
    • JSaintS
Re: [IC] CU7
« Reply #77 on: Sun, 02 August 2020, 09:33:43 »
On their discord capsunlocked has said the GB will start August 1st.

Would you have a link to the Discord? Wouldn't want to miss any info given it's already August 2nd. I tried looking on their site but I only find their IG and Twitter page.

Offline fatherfork

  • Posts: 3
Re: [IC] CU7
« Reply #78 on: Mon, 03 August 2020, 15:15:43 »

Offline CAPS UNLOCKED

  • Thread Starter
  • Posts: 538
  • Location: United Kingdom
    • capsunlocked
Re: [IC] CU7
« Reply #79 on: Sat, 22 August 2020, 08:22:30 »

We are currently in the process of finalising the CU7 design, but we are considering making the following change and wanted to hear your feedback on the decision.


This change is not 100% confirmed. 

C


hange: 

1) Changing the interface from 2x USB-A and 1 USB-C to 2xUSB-A (removal of USB-C).


Reasoning: 

We are considering making this change because keeping all 3 ports is creating several issues.


Firstly, the ports will sit flush with the case and the difference between the USB-C and USB-A ports is causing them to not be aligned and therefore is not visually pleasing.


Secondly the base plate screws have moved to under the rubber feet but as the PCB is so busy it is proving difficult to place the standoffs going through the case without coming into contact with other components.


Other than this the CU7 is almost complete and we are looking to move forward as soon as a decision on the design has been made. We want to know how this proposed change would impact your decision to join the group buy.

Offline PaultheSloth

  • Posts: 51
  • Location: Singapore
  • JW Double Black
Re: [IC] CU7
« Reply #80 on: Sat, 22 August 2020, 08:35:48 »

We are currently in the process of finalising the CU7 design, but we are considering making the following change and wanted to hear your feedback on the decision.


This change is not 100% confirmed. 

C


hange: 

1) Changing the interface from 2x USB-A and 1 USB-C to 2xUSB-A (removal of USB-C).


Reasoning: 

We are considering making this change because keeping all 3 ports is creating several issues.


Firstly, the ports will sit flush with the case and the difference between the USB-C and USB-A ports is causing them to not be aligned and therefore is not visually pleasing.


Secondly the base plate screws have moved to under the rubber feet but as the PCB is so busy it is proving difficult to place the standoffs going through the case without coming into contact with other components.


Other than this the CU7 is almost complete and we are looking to move forward as soon as a decision on the design has been made. We want to know how this proposed change would impact your decision to join the group buy.

changes seems more like a plus to me, especially no.1  :thumb:
Polaris|Leaf60|QXP|DC60|Planck|SKB60|Tokyo60|UT-47|AnnePro

Offline Nudd

  • Posts: 30
  • Location: Sunny Wales
Re: [IC] CU7
« Reply #81 on: Sat, 22 August 2020, 08:45:08 »

We are currently in the process of finalising the CU7 design, but we are considering making the following change and wanted to hear your feedback on the decision.


This change is not 100% confirmed. 

C


hange: 

1) Changing the interface from 2x USB-A and 1 USB-C to 2xUSB-A (removal of USB-C).


Reasoning: 

We are considering making this change because keeping all 3 ports is creating several issues.


Firstly, the ports will sit flush with the case and the difference between the USB-C and USB-A ports is causing them to not be aligned and therefore is not visually pleasing.


Secondly the base plate screws have moved to under the rubber feet but as the PCB is so busy it is proving difficult to place the standoffs going through the case without coming into contact with other components.


Other than this the CU7 is almost complete and we are looking to move forward as soon as a decision on the design has been made. We want to know how this proposed change would impact your decision to join the group buy.

Fine with that and I'm still in.

Offline Convergence

  • Posts: 42
Re: [IC] CU7
« Reply #82 on: Sat, 22 August 2020, 20:44:54 »

We are currently in the process of finalising the CU7 design, but we are considering making the following change and wanted to hear your feedback on the decision.


This change is not 100% confirmed. 

C


hange: 

1) Changing the interface from 2x USB-A and 1 USB-C to 2xUSB-A (removal of USB-C).


Reasoning: 

We are considering making this change because keeping all 3 ports is creating several issues.


Firstly, the ports will sit flush with the case and the difference between the USB-C and USB-A ports is causing them to not be aligned and therefore is not visually pleasing.


Secondly the base plate screws have moved to under the rubber feet but as the PCB is so busy it is proving difficult to place the standoffs going through the case without coming into contact with other components.


Other than this the CU7 is almost complete and we are looking to move forward as soon as a decision on the design has been made. We want to know how this proposed change would impact your decision to join the group buy.

Personal opinion: I would much prefer one USB-C port over two USB-A. Having two USB-A ports on the back means that the cable going to the host device will be off-centre which may be jarring if there's nothing else plugged in to the other USB-A.

Offline Hdjekso

  • Posts: 46
Re: [IC] CU7
« Reply #83 on: Tue, 08 September 2020, 21:20:46 »

We are currently in the process of finalising the CU7 design, but we are considering making the following change and wanted to hear your feedback on the decision.


This change is not 100% confirmed. 

C


hange: 

1) Changing the interface from 2x USB-A and 1 USB-C to 2xUSB-A (removal of USB-C).


Reasoning: 

We are considering making this change because keeping all 3 ports is creating several issues.


Firstly, the ports will sit flush with the case and the difference between the USB-C and USB-A ports is causing them to not be aligned and therefore is not visually pleasing.


Secondly the base plate screws have moved to under the rubber feet but as the PCB is so busy it is proving difficult to place the standoffs going through the case without coming into contact with other components.


Other than this the CU7 is almost complete and we are looking to move forward as soon as a decision on the design has been made. We want to know how this proposed change would impact your decision to join the group buy.

Personal opinion: I would much prefer one USB-C port over two USB-A. Having two USB-A ports on the back means that the cable going to the host device will be off-centre which may be jarring if there's nothing else plugged in to the other USB-A.

Seconded

Offline JPVann

  • Posts: 22
  • Location: Dallas, Texas
Re: [IC] CU7
« Reply #84 on: Wed, 09 September 2020, 08:56:07 »
I would buy with any ports on it.  The sooner the better :)

Offline chowder101

  • Posts: 2
Re: [IC] CU7
« Reply #85 on: Wed, 09 September 2020, 11:23:24 »
This looks very neutral. I would love to see this go into production. Why are there two extra USB type A ports?

Offline Kowaishi

  • Posts: 1
Re: [IC] CU7
« Reply #86 on: Fri, 23 October 2020, 06:19:17 »
does the knob wobble at all, or strongly centrered

Offline Convergence

  • Posts: 42
Re: CU7
« Reply #87 on: Sun, 25 October 2020, 11:27:27 »
From the October 2020 update:
Quote
CU7

We have returned to the previous interface of 2xUSB-A and 1xUSB-C.
We aim to release more product and group buy information this month!

Super excited to find out more, hoping different colour options will be available!

Offline CAPS UNLOCKED

  • Thread Starter
  • Posts: 538
  • Location: United Kingdom
    • capsunlocked
Re: CU7
« Reply #88 on: Fri, 20 November 2020, 09:26:41 »



256207-0

It's official, the CU7 GB starts on 5th Dec and will be available from £59.99 (inc VAT)!

- USB-A ports were removed due to issues with power draw and so only 1xUXB-C remains.
- Case is only available in black, PCB is matte black.


Store Page: https://caps-unlocked.com/cu7/


Interest List Form: https://ae982967.sibforms.com/serve/MUIEALexej4Bd-7p-TA2O-arDEgLilqjMBJUrcvW4nub1f_qaY1r7n_ap8ie_cqQmTp-kUuN30hg3tuMT61WpxbtVWPXU5gdK6jwVvXINUYV13hZzxal337C9B0MmU_oDeDGQ06aOgoHH1_jcxyKpnRXTYjpOtsWgJEpspl0F5-ihfyMiXfbGL7VoEOvwvd8lkAxwiz9GETxPKya


Sign up to the form and you will be sent a £5 discount code at launch!

Offline Poesjuh

  • Posts: 726
  • Location: Netherlands - N-H
Re: CU7
« Reply #89 on: Fri, 20 November 2020, 14:26:59 »
Huray!!


Sent from my iPhone using Tapatalk

Offline hottrout

  • Posts: 1487
  • Location: Norn Iron
  • I'd Hit Dat Key
Re: CU7
« Reply #90 on: Sat, 05 December 2020, 04:02:38 »
Thank you for the code, I have ordered.  Waiting a long time for this little macro pad.  Good luck with the GB.
Current Daily Driver : Virgo - Ultramarine - Standard Lube  |  WTB : Topre Realforce Hi-Pro, please PM me if you have one for sale.

Systems -
More
Work |i9-7940x@4.8ghz|32GB(3600)|STRIX-RTX3090Ti|Bespoke Water, 360m Rad|X299 Prime Deluxe|EK x299 Monoblock|Optane 900p|2x1TB 960 Pro|2x10TB Helium|Dell U3415W + Dell UP2116Q
Home |i9-13900ks|32GB(7300)|Rog RTX 4090|Asus Z790 Rog Maximus Hero|Torrent Air|2TB 990 Pro|2TB 990 Pro|Dell AW3423DW QOLED|NEC MultiSync|Drobo16TB
Mining |i5-7500|16GB(2400)|H110 Pro BTC+|8x1080Ti|2x1650Watt PSU

Plus 40 years of collecting retro computers, consoles, games, peripherals, mainframes and mini's as well as their software, keyboards, games and manuals. 100's of systems including every Amiga model made
  Keyboards -
More
IBM 3101 | IBM 3276 | IBM 5150 | IBM ModelM | Dictaphone Dual Display | Vintage Cherrys (1982 onwards, just about all of them) | Commodore (all of them) | Nixdorf | Siemens | ICL | Apple (all of them) | Filco Majistouch | KBDFans 5degree - Chocolate | Rama M6-B - Moon | CA66 Silver | ClueBoard Graphite/PC | Varmilo VA69M Silver | E7-V1 SE Yellow | Rama U-80 Space Grey | VN66 Navy | BOCC Frosted Polycarbonate | Rama M10-C Midnight | FLX Virgo Teal & Black | Rama M60-A LYN Kuro | Space65 CyberVoyager WhiteGold | Space65 CyberVoyager Terminal | Hyper 7 | Clarabelle Sandblasted Polycarbonate | Elongate Mini 1800 Blue | Petrichor 1800 Red | Vulcan Maja Ergo Green | Think6.5v2 RoboCop | Jacky Bear 65% E-White | Sakabato CB87 TKL Champagne | KCK KY-01 Aquamarine | Jae J-01 F&F E-White & Copper | S7.7 E-White | The Adélie Blue | NIX OxalyS80 LE Dark Polycarbonate | Mesa TKL E-White | Smith & Rune IRON180 Graen/Brass | Skog Reboot Desert | CU7 Black | ROTR Silver & Copper | RAMA Kara Soya | Grid 650 E-White | SIX5 LE Aluminium & Gold | OwLab Voice65 Grey | BOX 75 Black Stainless Steel | Onyx E-White | Ikki68 BT Charcoal | Smith & Rune Iron 165 Graphite & Stainless Steel | Epoch 80% Black | RAMA Thermal SEQ2 Kuro | Paper Crane Gerald65 SE PC & CF | CB1800 ZANBATO | GLiTCH | Eclipse Grey & SS | TGR Tomo Silver | Mountain Ergo Black | Keebwerk NASU Black/Red | Phase One 65 Grey | Command TKL Fire | Chalice Frosted | VIENDI 8L Shadow | | Vulcan Maja PC | Glove 80 | Matrix 8XV 3.0 Starry Night | Sagittarius Grey Lilac | AKB OGR & Numpad Dolch | Type K Black

Offline Poesjuh

  • Posts: 726
  • Location: Netherlands - N-H
Re: CU7
« Reply #91 on: Sat, 05 December 2020, 04:57:26 »
Got one as well :D


Sent from my iPhone using Tapatalk

Offline bball2

  • Posts: 418
Re: CU7
« Reply #92 on: Thu, 24 December 2020, 00:38:47 »
Is the group buy closed? I had it bookmarked as ending Jan 5th based on this page:

https://caps-unlocked.com/blog/everything-you-need-to-know-about-the-cu7-and-the-upcoming-group-buy/

But the order page looks sold out with the end date changed to Dec 12 :-(

Offline Poesjuh

  • Posts: 726
  • Location: Netherlands - N-H
Re: CU7
« Reply #93 on: Thu, 24 December 2020, 03:22:17 »
It closed earlier due to the insane amount of orders.


Sent from my iPhone using Tapatalk

Offline WaS

  • Posts: 44
  • Location: Germany
    • TELEPORT
Re: [IC] CU7
« Reply #94 on: Thu, 22 April 2021, 17:43:02 »
Clean looking. Keeping it all USB C is a great start.

Same.

Offline the_onlyhope

  • Posts: 16
Re: CU7
« Reply #95 on: Sat, 03 July 2021, 06:56:25 »
Does anyone know if this shipped yet? Still haven't got mine in the US

Offline hottrout

  • Posts: 1487
  • Location: Norn Iron
  • I'd Hit Dat Key
Re: CU7
« Reply #96 on: Sat, 03 July 2021, 07:22:33 »
I don't think so.  I am in the UK and I have not received it yet either.
Current Daily Driver : Virgo - Ultramarine - Standard Lube  |  WTB : Topre Realforce Hi-Pro, please PM me if you have one for sale.

Systems -
More
Work |i9-7940x@4.8ghz|32GB(3600)|STRIX-RTX3090Ti|Bespoke Water, 360m Rad|X299 Prime Deluxe|EK x299 Monoblock|Optane 900p|2x1TB 960 Pro|2x10TB Helium|Dell U3415W + Dell UP2116Q
Home |i9-13900ks|32GB(7300)|Rog RTX 4090|Asus Z790 Rog Maximus Hero|Torrent Air|2TB 990 Pro|2TB 990 Pro|Dell AW3423DW QOLED|NEC MultiSync|Drobo16TB
Mining |i5-7500|16GB(2400)|H110 Pro BTC+|8x1080Ti|2x1650Watt PSU

Plus 40 years of collecting retro computers, consoles, games, peripherals, mainframes and mini's as well as their software, keyboards, games and manuals. 100's of systems including every Amiga model made
  Keyboards -
More
IBM 3101 | IBM 3276 | IBM 5150 | IBM ModelM | Dictaphone Dual Display | Vintage Cherrys (1982 onwards, just about all of them) | Commodore (all of them) | Nixdorf | Siemens | ICL | Apple (all of them) | Filco Majistouch | KBDFans 5degree - Chocolate | Rama M6-B - Moon | CA66 Silver | ClueBoard Graphite/PC | Varmilo VA69M Silver | E7-V1 SE Yellow | Rama U-80 Space Grey | VN66 Navy | BOCC Frosted Polycarbonate | Rama M10-C Midnight | FLX Virgo Teal & Black | Rama M60-A LYN Kuro | Space65 CyberVoyager WhiteGold | Space65 CyberVoyager Terminal | Hyper 7 | Clarabelle Sandblasted Polycarbonate | Elongate Mini 1800 Blue | Petrichor 1800 Red | Vulcan Maja Ergo Green | Think6.5v2 RoboCop | Jacky Bear 65% E-White | Sakabato CB87 TKL Champagne | KCK KY-01 Aquamarine | Jae J-01 F&F E-White & Copper | S7.7 E-White | The Adélie Blue | NIX OxalyS80 LE Dark Polycarbonate | Mesa TKL E-White | Smith & Rune IRON180 Graen/Brass | Skog Reboot Desert | CU7 Black | ROTR Silver & Copper | RAMA Kara Soya | Grid 650 E-White | SIX5 LE Aluminium & Gold | OwLab Voice65 Grey | BOX 75 Black Stainless Steel | Onyx E-White | Ikki68 BT Charcoal | Smith & Rune Iron 165 Graphite & Stainless Steel | Epoch 80% Black | RAMA Thermal SEQ2 Kuro | Paper Crane Gerald65 SE PC & CF | CB1800 ZANBATO | GLiTCH | Eclipse Grey & SS | TGR Tomo Silver | Mountain Ergo Black | Keebwerk NASU Black/Red | Phase One 65 Grey | Command TKL Fire | Chalice Frosted | VIENDI 8L Shadow | | Vulcan Maja PC | Glove 80 | Matrix 8XV 3.0 Starry Night | Sagittarius Grey Lilac | AKB OGR & Numpad Dolch | Type K Black

Offline growler

  • Posts: 246
Re: CU7
« Reply #97 on: Tue, 06 July 2021, 03:49:55 »
Me neither

Sent from my SM-G980F using Tapatalk

Don't just stare at it ...

Offline Alfodur

  • Posts: 3
  • Location: Canada
  • Keycap Artisan
    • Just
Re: CU7
« Reply #98 on: Fri, 06 August 2021, 15:04:53 »
This thing is awesome, I want one!

Offline growler

  • Posts: 246
Re: CU7
« Reply #99 on: Fri, 06 August 2021, 15:41:55 »
Mine arrived, bangin'

Sent from my SM-G980F using Tapatalk

Don't just stare at it ...

Offline ninjacore

  • Posts: 329
Re: CU7
« Reply #100 on: Fri, 06 August 2021, 16:26:26 »
Mine arrived, bangin'

Sent from my SM-G980F using Tapatalk

Nice! Out of curiosity, did you get a tracking number or any update or did it just show up?  I ordered mine in the first batch (I think? - Dec 5, 2020) and haven't really heard anything about shipping.

Offline growler

  • Posts: 246
Re: CU7
« Reply #101 on: Fri, 06 August 2021, 18:37:58 »
I got a tracking link that didn't work, then it arrived a few days after that.

Sent from my SM-G980F using Tapatalk

Don't just stare at it ...

Offline hottrout

  • Posts: 1487
  • Location: Norn Iron
  • I'd Hit Dat Key
Re: CU7
« Reply #102 on: Sat, 07 August 2021, 03:46:44 »
Mine arrived and it is really nice.  Well finished with good solid build. Nice job.
Current Daily Driver : Virgo - Ultramarine - Standard Lube  |  WTB : Topre Realforce Hi-Pro, please PM me if you have one for sale.

Systems -
More
Work |i9-7940x@4.8ghz|32GB(3600)|STRIX-RTX3090Ti|Bespoke Water, 360m Rad|X299 Prime Deluxe|EK x299 Monoblock|Optane 900p|2x1TB 960 Pro|2x10TB Helium|Dell U3415W + Dell UP2116Q
Home |i9-13900ks|32GB(7300)|Rog RTX 4090|Asus Z790 Rog Maximus Hero|Torrent Air|2TB 990 Pro|2TB 990 Pro|Dell AW3423DW QOLED|NEC MultiSync|Drobo16TB
Mining |i5-7500|16GB(2400)|H110 Pro BTC+|8x1080Ti|2x1650Watt PSU

Plus 40 years of collecting retro computers, consoles, games, peripherals, mainframes and mini's as well as their software, keyboards, games and manuals. 100's of systems including every Amiga model made
  Keyboards -
More
IBM 3101 | IBM 3276 | IBM 5150 | IBM ModelM | Dictaphone Dual Display | Vintage Cherrys (1982 onwards, just about all of them) | Commodore (all of them) | Nixdorf | Siemens | ICL | Apple (all of them) | Filco Majistouch | KBDFans 5degree - Chocolate | Rama M6-B - Moon | CA66 Silver | ClueBoard Graphite/PC | Varmilo VA69M Silver | E7-V1 SE Yellow | Rama U-80 Space Grey | VN66 Navy | BOCC Frosted Polycarbonate | Rama M10-C Midnight | FLX Virgo Teal & Black | Rama M60-A LYN Kuro | Space65 CyberVoyager WhiteGold | Space65 CyberVoyager Terminal | Hyper 7 | Clarabelle Sandblasted Polycarbonate | Elongate Mini 1800 Blue | Petrichor 1800 Red | Vulcan Maja Ergo Green | Think6.5v2 RoboCop | Jacky Bear 65% E-White | Sakabato CB87 TKL Champagne | KCK KY-01 Aquamarine | Jae J-01 F&F E-White & Copper | S7.7 E-White | The Adélie Blue | NIX OxalyS80 LE Dark Polycarbonate | Mesa TKL E-White | Smith & Rune IRON180 Graen/Brass | Skog Reboot Desert | CU7 Black | ROTR Silver & Copper | RAMA Kara Soya | Grid 650 E-White | SIX5 LE Aluminium & Gold | OwLab Voice65 Grey | BOX 75 Black Stainless Steel | Onyx E-White | Ikki68 BT Charcoal | Smith & Rune Iron 165 Graphite & Stainless Steel | Epoch 80% Black | RAMA Thermal SEQ2 Kuro | Paper Crane Gerald65 SE PC & CF | CB1800 ZANBATO | GLiTCH | Eclipse Grey & SS | TGR Tomo Silver | Mountain Ergo Black | Keebwerk NASU Black/Red | Phase One 65 Grey | Command TKL Fire | Chalice Frosted | VIENDI 8L Shadow | | Vulcan Maja PC | Glove 80 | Matrix 8XV 3.0 Starry Night | Sagittarius Grey Lilac | AKB OGR & Numpad Dolch | Type K Black