Author Topic: [GB] Phantom Parts and Assembly Services (Update Posted 2018/07/23) (Read 303162 times)

metalliqaz · « **Reply #550 on:** Sun, 10 March 2013, 22:56:38 »

Quote from: TheProfosist on Sun, 10 March 2013, 22:55:41

Quote from: metalliqaz on Fri, 01 March 2013, 17:31:53
I sent 200 bucks and I'm starting to worry about it...
dont worry all the money from everyone is still sitting in my account aside from the little that has been sent to 7bit already

Thanks for the update I appreciate it.

TheProfosist · « **Reply #551 on:** Sun, 10 March 2013, 22:57:24 »

Quote from: 7bit on Sun, 03 March 2013, 04:54:50

He sent me message yesterday, so it seems he is still alive. Hope did not get into winter hibernation again, but woke up for real and tell me how many switches to send and also pay for them ...

sent you a pm about the rest of the switches

TheProfosist · « **Reply #552 on:** Sun, 10 March 2013, 22:58:53 »

Quote from: metalliqaz on Wed, 06 March 2013, 10:15:12

Is it possible at all to change my order of red switches to brown or clear?

sure clears would be easiest to switch to i think?

metalliqaz · « **Reply #553 on:** Sun, 10 March 2013, 23:07:11 »

Quote from: TheProfosist on Sun, 10 March 2013, 22:58:53

Quote from: metalliqaz on Wed, 06 March 2013, 10:15:12
Is it possible at all to change my order of red switches to brown or clear?
sure clears would be easiest to switch to i think?

Don't worry about it Order is sent, no sense in rocking the boat. Thanks, though.

Rendom · « **Reply #554 on:** Tue, 12 March 2013, 15:50:33 »

hi prof, have you checked it? you said i havent pay yet which i did.

Kabuks · « **Reply #555 on:** Tue, 12 March 2013, 17:36:15 »

If we ordered Mx clears is there an update as to when they will be ready?

Jupiter · « **Reply #556 on:** Tue, 12 March 2013, 17:40:37 »

Any word on when the parts will be ready/shipped?

metalliqaz · « **Reply #557 on:** Tue, 12 March 2013, 19:26:46 »

They haven't even been ordered yet. I'm not sure why, but it's going to be a while before they are shipped.

Jupiter · « **Reply #558 on:** Tue, 12 March 2013, 20:27:28 »

Urgh, okay. I have to get used to the slowness of Geekhack

SmallFry · « **Reply #559 on:** Tue, 12 March 2013, 21:48:24 »

Quote from: Jupiter on Tue, 12 March 2013, 20:27:28

Urgh, okay. I have to get used to the slowness of Geekhack

This buy is overly slow. Most buys go quicker, sadly.

TheProfosist · « **Reply #560 on:** Tue, 12 March 2013, 21:49:48 »

sorry should have pressed people to pay and cut them off sooner

bavman · « **Reply #561 on:** Tue, 12 March 2013, 21:51:21 »

Do you have a time estimate prof for when you'll put the order in and approximate lead time?

isman · « **Reply #562 on:** Wed, 13 March 2013, 10:30:28 »

Quote from: TheProfosist on Tue, 12 March 2013, 21:49:48

sorry should have pressed people to pay and cut them off sooner

I wish I paid already, but I still didn't get any invoice

Rendom · « **Reply #563 on:** Wed, 13 March 2013, 10:45:20 »

Quote from: Rendom on Tue, 12 March 2013, 15:50:33

hi prof, have you checked it? you said i havent pay yet which i did.

Why do I feel like everytime I asked about my payment I get ignored? Do you mind to reply? You told me I haven't paid in pm and you stopped replied after I provide you the paypal transaction number.i just need a answer that's all.

TheQsanity · « **Reply #564 on:** Thu, 14 March 2013, 03:02:47 »

Have pbc been made and shipped to you yet?

metafour · « **Reply #565 on:** Sun, 17 March 2013, 17:50:26 »

I only ordered 2 sets of 7x stabilizer kits. How is shipping for these going to be handled? Is WFD making the wires so that these can actually be included with the PCB and Plate shipment or are these going to go out separately? I'm trying to sell my Phantom sets since I need to move on from mechanical keyboards and this is a little detail that I would like to get resolved as quickly as possible. The invoice I paid didn't include a shipping charge so I just need to get some clarification.

Thanks

WhiteFireDragon · « **Reply #566 on:** Sun, 17 March 2013, 18:50:24 »

I'll try to pick up his slack on the cherry stabilizers since he gets those from me anyways. But if you ordered switches or a keyboard from him, that's out of my control. PCBs are out of my control as well, I'm sure bavman will update you guys once he receives them.

Not sure why Prof left this GB dormant for so long.

metafour · « **Reply #567 on:** Sun, 17 March 2013, 19:31:15 »

Quote from: WhiteFireDragon on Sun, 17 March 2013, 18:50:24

I'll try to pick up his slack on the cherry stabilizers since he gets those from me anyways. But if you ordered switches or a keyboard from him, that's out of my control. PCBs are out of my control as well, I'm sure bavman will update you guys once he receives them.

Not sure why Prof left this GB dormant for so long.

I only ordered the stabs from him but I thought you were going to be making them from some of the information that had come out earlier in the GB. Ideally the stabs I ordered can be shipped with the plates to bavman so the PCBs, Plates and Stabs can all go out as one package.

Denonic · « **Reply #568 on:** Thu, 21 March 2013, 18:43:53 »

Prof I'm still waiting on an invoice for a plu. Not sure if my pm got lost in your most likely overflowing inbox =P

BimboBB · « **Reply #569 on:** Tue, 26 March 2013, 10:53:19 »

Any news here? Become a little bit worried about these long silence breaks.

SmallFry · « **Reply #570 on:** Tue, 26 March 2013, 10:54:35 »

I keep trying to get him to be a bit more active on GH, but he's not budging. I have a copy of the spread sheet, so when parts do come in to him (if worse comes to worse) I can take over, though this buy looks a lot like R4, currently.

mashby · « **Reply #571 on:** Tue, 26 March 2013, 11:09:36 »

But aren't we waiting on the PCBs to be shipped anyway?

deSheol · « **Reply #572 on:** Tue, 26 March 2013, 11:11:42 »

Good luck guys, has it been 45 days yet?

SmallFry · « **Reply #573 on:** Tue, 26 March 2013, 11:20:54 »

There are about a dozen assembly orders,the rest is parts. So, there shouldn't have been such a hold up, though I'm not Prof's keeper nor speaker.

Rendom · « **Reply #574 on:** Tue, 26 March 2013, 12:38:07 »

He did replied me after I sent him a dispute in Paypal, he told me he's been really busy in real life and all the orders are confirmed and etc.

SmallFry · « **Reply #575 on:** Tue, 26 March 2013, 19:44:36 »

Just FYI to everyone, I'm not Prof's contact. I know you are annoyed with this GB, as am I, but I have only so much time.

(To everyone who has PM'd me prior, I will honor what you've asked me.

)

metalliqaz · « **Reply #576 on:** Tue, 26 March 2013, 22:10:53 »

I'd really like to know why the parts aren't ordered yet.

Kabuks · « **Reply #577 on:** Tue, 26 March 2013, 22:14:49 »

I ordered clears for my LZ-GH but at this rate I would have probably been better off looking for them in the classifieds.

metafour · « **Reply #578 on:** Tue, 26 March 2013, 23:11:30 »

I was concerned with how aggressive he was trying to make himself part of the Phantom GB from the start. The current situation is exactly why I had concerns. This isn't the first time this has happened with him either. He previously had a subforum and offered some services and got too busy to deal with them. He had caps lock keys that needed to be modded for quite a few months and other members got quite upset. Sorry Prof but you need to recognize what your limitations are and not exceed them. Communicate with the members here in this thread that have paid you money, myself included.

okooko · « **Reply #579 on:** Tue, 26 March 2013, 23:18:36 »

Anytime I've ever PM'd TheProf for anything, he has replied pretty much right away. From my experiences dealing with him, its been very positive.
This GB requires a good amount of coordination and work and props to all the people behind it.

As far as I'm concerned, updates would be nice although as Mashby mentionned that the PCBs are yet to be done so there is a bit of time left to get all the part orders done.
I, along with many others I'm sure, would like to have a discussion with TheProf regarding various things but I guess I'll do it when the time comes closer.

metafour · « **Reply #580 on:** Tue, 26 March 2013, 23:33:05 »

The original interest check mentioned that this service would close 7 days after the PCB GB closed. I believe he extended it and then it took a bit to get everyone paid up. At that point everything should have been ordered to minimize delays.

Last update I saw said the PCB shipping notification was received.

metalliqaz · « **Reply #581 on:** Wed, 27 March 2013, 00:01:56 »

Well, it's too late to file a dispute... I'll just ask nicely for a refund and source the switches from 7bit directly.

FabsSpeed · « **Reply #582 on:** Wed, 27 March 2013, 00:40:06 »

I also just sent him a pm.

Jupiter · « **Reply #583 on:** Wed, 27 March 2013, 03:05:46 »

All I'd like is some information as to what's happening.

Rendom · « **Reply #584 on:** Wed, 27 March 2013, 13:18:29 »

Quote from: metalliqaz on Wed, 27 March 2013, 00:01:56

Well, it's too late to file a dispute... I'll just ask nicely for a refund and source the switches from 7bit directly.

Hmm..might do the same thing as you..

SmallFry · « **Reply #585 on:** Wed, 27 March 2013, 13:34:08 »

Prof has told me that refunds will not happen. I have no idea what is going on either guys.

iArson · « **Reply #586 on:** Wed, 27 March 2013, 14:04:18 »

Is there any reason he's not the one telling us this?

SmallFry · « **Reply #587 on:** Wed, 27 March 2013, 14:06:22 »

No clue. I'm trying to get him to update things. First it was school, then no desktop, now it's just that everyone shouldn't worry and he doesn't care that people are annoyed. :/

iArson · « **Reply #588 on:** Wed, 27 March 2013, 14:10:54 »

Interesting.

SmallFry · « **Reply #589 on:** Wed, 27 March 2013, 14:11:26 »

Join the club. Interesting...

Michael · « **Reply #590 on:** Wed, 27 March 2013, 14:27:25 »

I have a SS of him lurking this thread last night. Kind of lame to not respond. Sound exactly like the crap sherry pulls. When the heat gets hot, HIDE!!!

SmallFry · « **Reply #591 on:** Wed, 27 March 2013, 14:29:17 »

I agree Bro Caps. I agree.

metalliqaz · « **Reply #592 on:** Wed, 27 March 2013, 14:46:54 »

1) WFD and Smallfry seem to be on the ball. If they are willing and able, I think they should take over.
2) Assuming that doesn't happen, I want either proof that the parts have been ordered, a refund, or a plan that details an exact timeline for completion that is measured in single-digit days.
3) Assuming that doesn't happen, sanctions should be applied to the account and I will attempt to extract a refund in RL.

blighty · « **Reply #593 on:** Wed, 27 March 2013, 14:52:49 »

[GB] Phantom Parts and Assembly Services (Update Posted 2018/07/23)

Glad I only ordered Cherry stabs. LOL
How long until a "kind" soul posts prof's personal info, so the lynch mob knows where to show up

WhiteFireDragon · « **Reply #594 on:** Wed, 27 March 2013, 14:55:38 »

I'm already getting PMs for me to ship plates directly instead of shipping it to Prof, so it's probably best I'll manage the plate and cherry stabilizers/wires. He's getting those directly from me anyways.

But you guys are on your own for orders of switches, PLU keyboards, and refunds. That's not something I can control.

SmallFry · « **Reply #595 on:** Wed, 27 March 2013, 14:56:33 »

Quote from: metalliqaz on Wed, 27 March 2013, 14:46:54

1) WFD and Smallfry seem to be on the ball. If they are willing and able, I think they should take over.
2) Assuming that doesn't happen, I want either proof that the parts have been ordered, a refund, or a plan that details an exact timeline for completion that is measured in single-digit days.
3) Assuming that doesn't happen, sanctions should be applied to the account and I will attempt to extract a refund in RL.

I'm trying to stay out of running this thing, if at all possible and I will not release personal info on him. I will, however, keep pestering him.

metafour · « **Reply #596 on:** Wed, 27 March 2013, 16:10:53 »

Quote from: SmallFry on Wed, 27 March 2013, 14:06:22

now it's just that everyone shouldn't worry and he doesn't care that people are annoyed. :/

Total lack of integrity right there.

TheProfosist · « **Reply #597 on:** Wed, 27 March 2013, 19:39:52 »

I have gone through all of the invoices and updated the spreadsheet the below people are the people who I have complete orders for and have paid and will be receiving their items. I am not taking any more orders adding or removing people as parts have been ready to be sent to me for some time.

Code: [Select]

Acetrak
affect656
agor
AKIMbO
Amarok
Amr0d
AriesX
bavman
Binge
bisl
blighty
cgbuen
csimi
Elrick
FabsSpeed
FabsSpeed
Gameaholic
Germiphene
gizzard
Glod
Gupgup
isman
Jupiter
Kabuks
Keebo27
kmiller8
KuhnTang
Leewei
mashby
metafour
metalliqaz
nebo
Okooko
olaph
Oproer
Paranoid
pasph
r3dx
reality404
Rendom
rosh
Slavfot
sleepy916
Soulpyre
TheProfosist
TheQsanity
theultrazord
zyth3x

7bit has had the switches ready, some even packed for some time. I completed payment last week and now since the spreadsheet has been finalized he now has the final numbers of switches that everyone ordered.

The total number of cherry spacebar wires has also been sent to WFD in my latest pm to him, the last 3 I sent to him I never got a response to over the past few weeks but hes probably busy as well.

As soon as i get confirmation from WFD that he can produce that number of spacebar wires i will order the stabilizers from their respective sources along with the leds and resistors.

metalliqaz · « **Reply #598 on:** Wed, 27 March 2013, 19:54:13 »

Thanks that was a great update. Much appreciated. Definitely could have saves some consternation if those orders were announced.

Kabuks · « **Reply #599 on:** Wed, 27 March 2013, 19:58:56 »

Thanks for the update Prof.

News:

Author Topic: [GB] Phantom Parts and Assembly Services (Update Posted 2018/07/23) (Read 303162 times)