I use blu. I don't like it. 3 months so far.
Please tell me you own that tj. It'll add to the mental image I have of you.
Mine:
http://www.themedstick.com/SearchResults.asp?Cat=1823 (http://www.themedstick.com/SearchResults.asp?Cat=1823)
Show Image(http://jazzepipe.com/image/cache/data/18350%20Churchwarden%20Isis%20Shorty%20Lock%20Tank-500x500.jpg)
I really like those pipes!Don't do it, you might start again.
I quit smoking in Feb 2005, but I've been looking at this vape stuff...
If my beard was more gray, I'd shake it at people while giving my unsolicited opinions about everything.
I rock real pipes, suave is all I can say!
So lets say I want to try vaping, what would it cost for a decent kit, with a cool device and several flavors.
I really like those pipes!
I quit smoking in Feb 2005, but I've been looking at this vape stuff...
I really like those pipes!
I quit smoking in Feb 2005, but I've been looking at this vape stuff...
I think that's a great idea jd. It helped Noel a lot when ge quit smoking. You should absolutely go for it.
Need to vapor and quit smoking sigs -_-
I really like those pipes!
I quit smoking in Feb 2005, but I've been looking at this vape stuff...
I think that's a great idea jd. It helped Noel a lot when ge quit smoking. You should absolutely go for it.
He said he stopped vaping, so I assume he's back on analogs now? ;D
Oh no not at all :) he just had trouble finding a flavor he really liked, and he tried quite a few. I think the one he actually thought was alright was called "ectoplasm". I would take it up myself since they have cotton candy and apple pie :D
Need to vapor and quit smoking sigs -_-
I can't say it's a cig alternative, but it has worked for me and a few friends that smoked more than me. The one thing that I must say is that getting your sense of smell and taste back is pretty sweet. Also, not smelling like an ashtray is a plus as well.
I've heard great things about ectoplasm. It's on my "flavors to try" list. My current favorite flavors are desert flavors. Snickerdoodle cookies, strawberry shortcake, peanutbutter cup, ect. I also enjoy drink flavors every now and then. I found a pretty spot on Monster energy flavor.
Need to vapor and quit smoking sigs -_-
I can't say it's a cig alternative, but it has worked for me and a few friends that smoked more than me. The one thing that I must say is that getting your sense of smell and taste back is pretty sweet. Also, not smelling like an ashtray is a plus as well.
Can you recommend a good kit without breaking the wallet as I've seen some custom setups in the $300 mark.
I've used blu and wasn't a big fan if it
I've heard great things about ectoplasm. It's on my "flavors to try" list. My current favorite flavors are desert flavors. Snickerdoodle cookies, strawberry shortcake, peanutbutter cup, ect. I also enjoy drink flavors every now and then. I found a pretty spot on Monster energy flavor.
I loved looking through the dessert flavor list because they always had some really tasty options :D it reminded me a lot of hookah menus. You should definitely try the ectoplasm next ^^
my hookah
my hookah
You're a hookah!
I tried e-ciggs recently and was really unimpressed. Tastes weird in natural flavor, and just flat out gross in other flavors. I tried tropical, natural, menthol, and cherry. All disgusting, plus it dries out my mouth something fierce. I thought the nicotine intake would be more noticeable, but I was unsure I was getting anything at all. I quit smoking about 3 years and tried this on a lark, but was just left with a lighter wallet and a sense of regret. I occasionally smoke cigars and think I'll just stick to that for now.
Two were cigg types and one was the kind that looks like a glass baby bottle. No clue what they are called.I tried e-ciggs recently and was really unimpressed. Tastes weird in natural flavor, and just flat out gross in other flavors. I tried tropical, natural, menthol, and cherry. All disgusting, plus it dries out my mouth something fierce. I thought the nicotine intake would be more noticeable, but I was unsure I was getting anything at all. I quit smoking about 3 years and tried this on a lark, but was just left with a lighter wallet and a sense of regret. I occasionally smoke cigars and think I'll just stick to that for now.
Were they the e-cigs that look like cigs?
I really like those pipes!i quit smoking cigs in january 2007, and i think every smoker here should switch to e-cigs. ****en hate the smell of cigarettes.
I quit smoking in Feb 2005, but I've been looking at this vape stuff...
Only use it with tobacco of course ::)
http://geekhack.org/index.php?topic=42022.msg842501#msg842501
http://geekhack.org/index.php?topic=42022.msg842501#msg842501
Whoops. Sorry, didn't see that. Maybe I need to relax on the Pax. LOL.
Just googled some of the ones you guys referenced, they look pretty good and seem to be at a good price too. I think the pax is slightly overpriced, but I feel the premium is justified. Most people have no idea wtf it is, and it doesn't leave my clothes smelling like smoking, so it allows me to self medicate in complete stealth. The vapor does give off an aroma though, so I can't exactly use it in enclosed/tight indoor public spaces and feel completely ninja like... but I can use it in bigger buildings or outdoor public spaces :)
I'm actually looking to get one of these, can some of the professionals point out a good cheap one to start with? I'd also like some good fruit flavors to go along with it!
Gupgup
I'm actually looking to get one of these, can some of the professionals point out a good cheap one to start with? I'd also like some good fruit flavors to go along with it!
Gupgup
Joyetech 510 or eGo. Fruit flavours are dire.
Also, this isn't what this thread is actually about. guys. They're talking about "herb" vaporisers, not e-cigs.
Edit: Also, also, I've never used a vaporiser but I'm interested because I can barely be arsed rolling. I don't really get what the benefits are exactly over pipes, etc. - aren't you still just burning the "tobacco" anyway?
I started smoking disposable Metros about a year back now, in hindsight they were really rather crap. Moved up to a Volt battery, cartos and juices. Nothing fancy but it's inexpensive and does the job.
you can get a good deal at www.smokelessimage.com, they generally have a 3-4 day sale with at least 20% off once a month, and I think the code voltsave15 is good for 15% off any time. They have a loyalty program too which takes an amount off every purchase via a points system. for me it usually covers at least the shipping on a 20-30 dollar order.
Very sustainable as far as cost goes. I think i've invested less than 120 dollars in the whole system and it's lasted nearly a year.
For anyone in the New Jersey area. There is a vape specific store that lets you try different flavors of juice and sells starter kits for $20. They also sell varieties of different batteries, chambers, juices, etc.
You can get the $40 kit or you can buy everything separately and still get it for at most $50. My brother has one mixed with vapedojo.com components and it is amazing. Really good quality, thick vapor, nice throat hit (if you choose nicotine). I'm waiting to get more money to buy mine.
You can also buy online at http://vaporstoreonline.com
Like this vapor tank be serious:Show Image(http://images-cdn.ecwid.com/images/2184164/100914649.jpg)
That kills me. The stuff in those kits have been in the tobacco vape world for years but new these new "tobacco" vaporizer websites come in and charge double for old tech. I'm in the wrong business.
That kills me. The stuff in those kits have been in the tobacco vape world for years but new these new "tobacco" vaporizer websites come in and charge double for old tech. I'm in the wrong business.
hit for hit i'm still saving a bunch of money though and getting ridiculously high is a nice side effect
That kills me. The stuff in those kits have been in the tobacco vape world for years but new these new "tobacco" vaporizer websites come in and charge double for old tech. I'm in the wrong business.
hit for hit i'm still saving a bunch of money though and getting ridiculously high is a nice side effect
I know. But you can get the same stuff for way cheaper at places like this: http://www.caterpillarvapes.com/e-cigarette-kits/ce4-gold-kit/
It's literally the exact same stuff if you have the liquid. Even ce4 atomizers are out of date. There's stuff out there that knocks me on my ass with nicotine. I can't imagine what it'll do when you put other stuff in it.
I own an MFLB aswell and I love it. They are very handy when you can't smoke.i have one of those too... great for the casual smoker but they don't really do enough for me.
LOL nice. You gotta be careful with extracts, it's REALLY easy to take in too much, kind of like edibles.
Just got an Innokin MVP today. It's well made, inexpensive and does a great job.
Now to get more carto tanks.
Just got an Innokin MVP today. It's well made, inexpensive and does a great job.
Now to get more carto tanks.
That was my first VV. It's built like a tank and the battery lasts forever. Good choice.
Just got an Innokin MVP today. It's well made, inexpensive and does a great job.
Now to get more carto tanks.
That was my first VV. It's built like a tank and the battery lasts forever. Good choice.
I'm pumped. I had a ego twist copy that sucked kinda bad, this has got me happy with vaping again. I've got parts coming to build I nivel mod (thinking about using a cherry switch for my fire button).
Once they're in stock, I'll probably get a dna20d to build something with, too.
Just got an Innokin MVP today. It's well made, inexpensive and does a great job.
Now to get more carto tanks.
That was my first VV. It's built like a tank and the battery lasts forever. Good choice.
I'm pumped. I had a ego twist copy that sucked kinda bad, this has got me happy with vaping again. I've got parts coming to build I nivel mod (thinking about using a cherry switch for my fire button).
Once they're in stock, I'll probably get a dna20d to build something with, too.
My buddy was the same way. He stuck to egos (non twist) and relapsed. I recently let him borrow my mvp and now he loves it more than ever. I probably won't ever see my mvp again. Lol.
I got a dna20 in a Nintendo controller being built for me right now. Should have it here in a couple weeks. B button fires it, and the up/down changes the watts. I'm wicked excited.
Just got an Innokin MVP today. It's well made, inexpensive and does a great job.
Now to get more carto tanks.
That was my first VV. It's built like a tank and the battery lasts forever. Good choice.
I'm pumped. I had a ego twist copy that sucked kinda bad, this has got me happy with vaping again. I've got parts coming to build I nivel mod (thinking about using a cherry switch for my fire button).
Once they're in stock, I'll probably get a dna20d to build something with, too.
My buddy was the same way. He stuck to egos (non twist) and relapsed. I recently let him borrow my mvp and now he loves it more than ever. I probably won't ever see my mvp again. Lol.
I got a dna20 in a Nintendo controller being built for me right now. Should have it here in a couple weeks. B button fires it, and the up/down changes the watts. I'm wicked excited.
One of the Joe Litt (I think that's his name) mods?
I thought about getting a NES controller and making my own, then decided that they NES rattle would bug me too much.
Just got an Innokin MVP today. It's well made, inexpensive and does a great job.
Now to get more carto tanks.
That was my first VV. It's built like a tank and the battery lasts forever. Good choice.
I'm pumped. I had a ego twist copy that sucked kinda bad, this has got me happy with vaping again. I've got parts coming to build I nivel mod (thinking about using a cherry switch for my fire button).
Once they're in stock, I'll probably get a dna20d to build something with, too.
My buddy was the same way. He stuck to egos (non twist) and relapsed. I recently let him borrow my mvp and now he loves it more than ever. I probably won't ever see my mvp again. Lol.
I got a dna20 in a Nintendo controller being built for me right now. Should have it here in a couple weeks. B button fires it, and the up/down changes the watts. I'm wicked excited.
One of the Joe Litt (I think that's his name) mods?
I thought about getting a NES controller and making my own, then decided that they NES rattle would bug me too much.
Yup. That's him. Been on the waiting list for a couple months. I would have liked a snes controller better since that's the system I grew up with, but it's cool nonetheless. What makes the nes rattle? He sent me pics of the inside of the mod and it's completely gutted.
im going to bring this back from the grave. I tried one of those cheap-o gas station ecigs a few months back and it was a pretty awful experience. bad headaches, tight chest, chemical taste were just the start of the problems. i eventually threw it out a few days after trying it and went back to my trust reds.
I then stopped by a local shop yesterday to try out a decent setup and i walked out with an innokin MVP 2 starter kit. its pretty sweet. it's been 24 hours without an analog and i have no urge to get one back in my hand. I just joined the massdrop buy for a protank II. it's oddly satisfying...
im going to bring this back from the grave. I tried one of those cheap-o gas station ecigs a few months back and it was a pretty awful experience. bad headaches, tight chest, chemical taste were just the start of the problems. i eventually threw it out a few days after trying it and went back to my trust reds.
I then stopped by a local shop yesterday to try out a decent setup and i walked out with an innokin MVP 2 starter kit. its pretty sweet. it's been 24 hours without an analog and i have no urge to get one back in my hand. I just joined the massdrop buy for a protank II. it's oddly satisfying...
YESSSSSs
Another mvp user. I have both the v1 and v2. It's my favorite mod I've ever tried. Shape's awesome, it fires consistant, crazy battery life and it has none of the finicky irritations that DIY mods do.
im going to bring this back from the grave. I tried one of those cheap-o gas station ecigs a few months back and it was a pretty awful experience. bad headaches, tight chest, chemical taste were just the start of the problems. i eventually threw it out a few days after trying it and went back to my trust reds.
I then stopped by a local shop yesterday to try out a decent setup and i walked out with an innokin MVP 2 starter kit. its pretty sweet. it's been 24 hours without an analog and i have no urge to get one back in my hand. I just joined the massdrop buy for a protank II. it's oddly satisfying...
YESSSSSs
Another mvp user. I have both the v1 and v2. It's my favorite mod I've ever tried. Shape's awesome, it fires consistant, crazy battery life and it has none of the finicky irritations that DIY mods do.
i've been using it for 2 weeks now with a microcoil pro tank and its really solid. the ego threads are starting to get a little crunchy but i don't use ego stuff anyway. i actually just went on a vape spending spree the last week but i've been cigarette free since Oct 1. feels good man.
kayfun lite
protank 2 backup
db modz DNA 20 box mod
nemesis clone with magnet upgrade
igo-w RDA
im going to bring this back from the grave. I tried one of those cheap-o gas station ecigs a few months back and it was a pretty awful experience. bad headaches, tight chest, chemical taste were just the start of the problems. i eventually threw it out a few days after trying it and went back to my trust reds.
I then stopped by a local shop yesterday to try out a decent setup and i walked out with an innokin MVP 2 starter kit. its pretty sweet. it's been 24 hours without an analog and i have no urge to get one back in my hand. I just joined the massdrop buy for a protank II. it's oddly satisfying...
YESSSSSs
Another mvp user. I have both the v1 and v2. It's my favorite mod I've ever tried. Shape's awesome, it fires consistant, crazy battery life and it has none of the finicky irritations that DIY mods do.
i've been using it for 2 weeks now with a microcoil pro tank and its really solid. the ego threads are starting to get a little crunchy but i don't use ego stuff anyway. i actually just went on a vape spending spree the last week but i've been cigarette free since Oct 1. feels good man.
kayfun lite
protank 2 backup
db modz DNA 20 box mod
nemesis clone with magnet upgrade
igo-w RDA
I've got a dna20d that I'm going to try to finish a DIY mod for today. I bought a bunch of juice in the past week as I'm fairly set on cartos, tanks and clearomizers. I built my first coil for an igo-w this weekend, too. It's not bad, I just have a head cold so I can't taste much right now.
One thing I wanted to know and have not been able to find a suitable answer to yet is do nicotine-free, tobacco-free e-pipes have any health hazard AT ALL?
So what's the buy in to get started with this? I'm just curious.
Thanks Binge for the information.
I'd also like to get the view of other members as well on this:
Would you recommend someone to pickup e-cigs, if they are going to use nicotine-free, tobacco-free liquids?
I would like to get into this hobby, but I fear the health hazards and possible addictions. I would like to give this a go because I like menthol, coffee, and other flavors, so I would like a new method to experience these flavours.
If you don't think you'd be tempted to try the nicotine, I'd say go for it. There's some really good flavors out there that even if I didn't need the nicotine, I'd still vape it.
Smokefreesource.com has some of the best juices out there under one roof. The Standard, Space Jam, Uncle Junks, and Five Pawns are a few that are highly regarded.
Thanks for the recommendations, but it was more like, most smokers DO_NOT recommend others to smoke, is it the same with vape? Specially if someone is going completely clean, no-tobacco, no-nicotin, is it just as bad as chewing gum?
Thanks Binge for the information.Of course! Since you aren't after the nicotine effect, I'll give you some tips. If you want to vape liquid instead of dry plant material, I recommend using a vegetable glycerin extract. You decarb the herb first, then add about equal amount of VG to herb in a mason jar, and put it in a crockpot full of water for about 24-48 hours. You can look up detailed processes online. It works better if your plant material is stronger, using stress "mint" will produce an inferior vaping experience.
I'd also like to get the view of other members as well on this:
Would you recommend someone to pickup e-cigs, if they are going to use nicotine-free, tobacco-free liquids?
I would like to get into this hobby, but I fear the health hazards and possible addictions. I would like to give this a go because I like menthol, coffee, and other flavors, so I would like a new method to experience these flavours.
I have a Storz and Bickel digital volcano. I quite enjoy it for many a thing. :)
going old school today to revive the thread
bolt mod with a v1 kick and vivi nova (lol)Show Image(http://i.imgur.com/GHESgw3.jpg)
going old school today to revive the thread
bolt mod with a v1 kick and vivi nova (lol)Show Image(http://i.imgur.com/GHESgw3.jpg)
going old school today to revive the thread
bolt mod with a v1 kick and vivi nova (lol)Show Image(http://i.imgur.com/GHESgw3.jpg)
wouldn't old school be a..........cigarette?
How's this device? A lot of good reviews out there.
Might buy one from massdrop..
https://www.massdrop.com/buy/innokin-mvp-itaste
Really? I only saw you with your pipe. lol.
Do you know how long does the coil/atomizer lasts?
How's this device? A lot of good reviews out there.I hopped on that drop also. Although I'll have to wait a bit longer cuz it's shipping to Halverson and I have no clue when I'll actually get it. I'm very impatient with this. I've only tried cheap cigg looking ones from gas stations. Do the tanks come with their own coil/atomizer? Or is that something I should buy right away?
Might buy one from massdrop..
https://www.massdrop.com/buy/innokin-mvp-itaste
How's this device? A lot of good reviews out there.I hopped on that drop also. Although I'll have to wait a bit longer cuz it's shipping to Halverson and I have no clue when I'll actually get it. I'm very impatient with this. I've only tried cheap cigg looking ones from gas stations. Do the tanks come with their own coil/atomizer? Or is that something I should buy right away?
Might buy one from massdrop..
https://www.massdrop.com/buy/innokin-mvp-itaste
going old school today to revive the thread
bolt mod with a v1 kick and vivi nova (lol)Show Image(http://i.imgur.com/GHESgw3.jpg)
Looks awesome!
I just got my first vape today! Well my first e-liquid vape :PShow Image(http://i.imgur.com/Cugjt5K.jpg)
going old school today to revive the thread
bolt mod with a v1 kick and vivi nova (lol)Show Image(http://i.imgur.com/GHESgw3.jpg)
Looks awesome!
I just got my first vape today! Well my first e-liquid vape :PShow Image(http://i.imgur.com/Cugjt5K.jpg)
I have one of this and an MVP too o_o
Using Mini Pro Tank 2s but I think I'm gonna build a KFL+, RBAs look fun
How's this device? A lot of good reviews out there.I hopped on that drop also. Although I'll have to wait a bit longer cuz it's shipping to Halverson and I have no clue when I'll actually get it. I'm very impatient with this. I've only tried cheap cigg looking ones from gas stations. Do the tanks come with their own coil/atomizer? Or is that something I should buy right away?
Might buy one from massdrop..
https://www.massdrop.com/buy/innokin-mvp-itaste
going old school today to revive the thread
bolt mod with a v1 kick and vivi nova (lol)Show Image(http://i.imgur.com/GHESgw3.jpg)
Looks awesome!
I just got my first vape today! Well my first e-liquid vape :PShow Image(http://i.imgur.com/Cugjt5K.jpg)
I have one of this and an MVP too o_o
Using Mini Pro Tank 2s but I think I'm gonna build a KFL+, RBAs look fun
1. Good luck finding a kayfun lite. Seriously.
2. They aren't. At all.
going old school today to revive the thread
bolt mod with a v1 kick and vivi nova (lol)Show Image(http://i.imgur.com/GHESgw3.jpg)
Looks awesome!
I just got my first vape today! Well my first e-liquid vape :PShow Image(http://i.imgur.com/Cugjt5K.jpg)
Still three days left on the drop. I don't know much about massdrop. But we only ordered them a few days ago.How's this device? A lot of good reviews out there.I hopped on that drop also. Although I'll have to wait a bit longer cuz it's shipping to Halverson and I have no clue when I'll actually get it. I'm very impatient with this. I've only tried cheap cigg looking ones from gas stations. Do the tanks come with their own coil/atomizer? Or is that something I should buy right away?
Might buy one from massdrop..
https://www.massdrop.com/buy/innokin-mvp-itaste
I received mine on Monday. Halverson should've received it by now..
I'm just using stock Innokin iclear 16's and bought several more from fasttech.com. They are good enough. I don't plan on doing any mods or anything.
Getting new juice soon ^_^ and more pro tanks
Getting new juice soon ^_^ and more pro tanks
What juice? Share pls
Getting new juice soon ^_^ and more pro tanks
What juice? Share pls
I also made the mistake of stumbling across the Provari zombie edition.... I then quickly closed the page. But it's burned into my memory.
The only way I would get one is if I end up enjoying vaping a lot and the MVP 2 breaks or something. With a tube extension, extra battery, tank adapter and warranty plus shipping it would end up being $300 easy.
Nice green indeed! Too bad they're like $200... :eek:
Thanks to tj, beast and Hoffman I shall be getting an MVP 2.0
Thanks to tj, beast and Hoffman I shall be getting an MVP 2.0
I think I missed the sample :(
I thought it was auto. Oh well. I still need a tank or w/e it's called.
Oh no yeah I know it comes with one. But I remember what you said about it not being that great.
I stand by mini protank 2s :) But for the MVP maybe try out the Protank 3 or the full size protank 2
also EVODs on eGos are nice, friend has one.
I stand by mini protank 2s :) But for the MVP maybe try out the Protank 3 or the full size protank 2
also EVODs on eGos are nice, friend has one.
Who's this hacker on sifo's account. We all know the real sifo is dead
I stand by mini protank 2s :) But for the MVP maybe try out the Protank 3 or the full size protank 2
also EVODs on eGos are nice, friend has one.
Who's this hacker on sifo's account. We all know the real sifo is dead
Nope just back to StarCraft
This is as good a place as any to post since it falls into the realm of vaporizers. Just got these two 'lil dudes in the mail today: Magic Flight Launch Box and Power Adapter 2.0
it's my intro to the world of vaping ;)
(Attachment Link)
This is as good a place as any to post since it falls into the realm of vaporizers. Just got these two 'lil dudes in the mail today: Magic Flight Launch Box and Power Adapter 2.0
it's my intro to the world of vaping ;)
(Attachment Link)
What the hell?
Why can't you just smoke like normal people?
This is as good a place as any to post since it falls into the realm of vaporizers. Just got these two 'lil dudes in the mail today: Magic Flight Launch Box and Power Adapter 2.0Nice! How do you like it? I almost got one but went with a Pax instead. Works great for "tobacco" ;)
it's my intro to the world of vaping ;)
(Attachment Link)
This is as good a place as any to post since it falls into the realm of vaporizers. Just got these two 'lil dudes in the mail today: Magic Flight Launch Box and Power Adapter 2.0Nice! How do you like it? I almost got one but went with a Pax instead. Works great for "tobacco" ;)
it's my intro to the world of vaping ;)
(Attachment Link)
Show Image(http://i.imgur.com/J5599mK.jpg)
this thing is awesome
thanks again to tj and beast
Show Image(http://i.imgur.com/J5599mK.jpg)
this thing is awesome
thanks again to tj and beast
Glad you're enjoying yours too
EDIT: Meanwhile I'm doing some DIY e-juice atm.
Maybe we'll see some creamy demilk juice one day!!
Maybe we'll see some creamy demilk juice one day!!
Now, how do we get demik into the bottle......HmmmmMaybe we'll see some creamy demilk juice one day!!
Well we'll have mothers milk soon enough!
Just got these. Read good reviews on the ecto plasma. To me it wasn't that great though.Show Image(http://img.tapatalk.com/d/14/02/25/6uha3ady.jpg)
Show Image(http://i.imgur.com/J5599mK.jpg)
this thing is awesome
thanks again to tj and beast
To buy or not to buy a Kay funProvari mini is my next move. Most likely with a Phiniac tank, new beauty ring and anodized tank caps. Inside I'll use a Diver RBA. But I want a kayfun lite too. I'm holding out as long as I can to see if Provari makes a 3.0 version that has both Varianle Voltage AND Variable Wattage. A man can dream.
.. or maybe try out a mechanical mod. Or just ****ing buy a provari. But I have no reason to upgrade battery... :( meanwhile I got bottles to make juice so well see how that goes.
Show Image(http://i.imgur.com/6FdiC8c.jpg)
Just got my kayfun clone, highly impressed for the cost (sub $30 shipped). I also have some DNA30 chips waiting to be made into projects!
Ended up getting rid of my vape to my coworker >.>But it sounded like you were really enjoying it, no?
Ended up getting rid of my vape to my coworker >.>But it sounded like you were really enjoying it, no?
Show Image(http://i.imgur.com/6FdiC8c.jpg)
Just got my kayfun clone, highly impressed for the cost (sub $30 shipped). I also have some DNA30 chips waiting to be made into projects!
Show Image(http://i.imgur.com/6FdiC8c.jpg)
Just got my kayfun clone, highly impressed for the cost (sub $30 shipped). I also have some DNA30 chips waiting to be made into projects!
I also just ordered one of these, along with a nemesis and a kick.
edit: Did you get it from fasttech?
I wish the dna 30 boards were a bit more compact so that they could be worked into a tube mode instead of all these box mods they're always in.
this is my current device:Show Image(http://i.imgur.com/qXGUHne.jpg)
vamo v5 black chrome with a vivi nova tank. waiting on a nautilus to feed it, turtle ship v2 clone, russian 91%, igo-w, cartel stillare clone, and considering a pre-order for a zenith v2 atm.
Show Image(http://i.imgur.com/UOfnBDr.jpg)
:P NERV!
I'm enjoying a mixture of backwoods brews vanilla cupcake and blueberry at the moment. It's a combo that's grown on me and really begins to shine after it sits in a tank for 3-4 days. I was initially skeptical about the difference "steeping" actually makes but I am convinced now that it really improves the taste. At least in this flavor combination from backwoods brew.
wrong kind of vaping. we're talking about ecigs. lol
Anyone here have an informed opinion on a G-Pen? Was recommended it as a decent entry-level vape, just want to ask for more opinions.
Anyone here have an informed opinion on a G-Pen? Was recommended it as a decent entry-level vape, just want to ask for more opinions.
It looks like an overpriced ego-c or ego-t targeted to hash oil and herb vapers. If you're looking to vape substance-free liquids, an mvp, itaste svd or itaste vv would be better for less money.
Anyone here have an informed opinion on a G-Pen? Was recommended it as a decent entry-level vape, just want to ask for more opinions.
It looks like an overpriced ego-c or ego-t targeted to hash oil and herb vapers. If you're looking to vape substance-free liquids, an mvp, itaste svd or itaste vv would be better for less money.
Not looking for substance-free vaping, looking for something that performs similar to a Pax, but without the $250 price tag.
Anyone here have an informed opinion on a G-Pen? Was recommended it as a decent entry-level vape, just want to ask for more opinions.
Cream flavours typically need to sit in a dark, cool place like your closet for 1-2 weeks for their flavors to really come together and mature.Yea, they call it steeping. I'm currently trying that out. I'm told leaving the cap off helps too
you only want to air it out for a couple hours or so. leaving the cap off is also known as "streathing: or some ****.
you only want to air it out for a couple hours or so. leaving the cap off is also known as "streathing: or some ****.
steeping :D
no, I meant what I said.
as obnoxious as rip trippers is, he makes a good amount of information readily available to everyone.
Show Image(http://img.tapatalk.com/d/14/05/07/de3y5eja.jpg)
Thug Juice is starting to grow on me although I still find it tastes like couch syrup. Cinnamon Roll tastes just like it sounds. Orange Dream Bar is supposed to be like an orange creamsicle but it's not all that creamy. Still a very orange Popsicle flavor to it tho. I haven't tried Blue Moo on its own but I decided to mix some in with the Orange Dream Bar in my protank (I like to mess with flavors) Undesirable result but not terrible. All juices are from Mt. Baker and all have 2 extra flavor shots. The protank 3 minis seem to work well although the drip tips could be a little more snug. They don't fall out or anything tho.
I have it with no nic and 2 shots. I get no burning feeling or throat hit at all. And I find it tastes just like a cinnamon roll. Maybe it doesn't play nice with high nic levels.Show Image(http://img.tapatalk.com/d/14/05/07/de3y5eja.jpg)
Thug Juice is starting to grow on me although I still find it tastes like couch syrup. Cinnamon Roll tastes just like it sounds. Orange Dream Bar is supposed to be like an orange creamsicle but it's not all that creamy. Still a very orange Popsicle flavor to it tho. I haven't tried Blue Moo on its own but I decided to mix some in with the Orange Dream Bar in my protank (I like to mess with flavors) Undesirable result but not terrible. All juices are from Mt. Baker and all have 2 extra flavor shots. The protank 3 minis seem to work well although the drip tips could be a little more snug. They don't fall out or anything tho.
I recently got mtbkr cinnamon roll, (18mg 50/50 with 1shot) it gave me that tingly throat burn feeling for about a minute after. I wouldn't say it's a bad flavour just, I wouldn't give it the review most are. (Btw it's not the PG affecting me) :confused:
Show Image(http://img.tapatalk.com/d/14/05/07/de3y5eja.jpg)
Thug Juice is starting to grow on me although I still find it tastes like couch syrup. Cinnamon Roll tastes just like it sounds. Orange Dream Bar is supposed to be like an orange creamsicle but it's not all that creamy. Still a very orange Popsicle flavor to it tho. I haven't tried Blue Moo on its own but I decided to mix some in with the Orange Dream Bar in my protank (I like to mess with flavors) Undesirable result but not terrible. All juices are from Mt. Baker and all have 2 extra flavor shots. The protank 3 minis seem to work well although the drip tips could be a little more snug. They don't fall out or anything tho.
I recently got mtbkr cinnamon roll, (18mg 50/50 with 1shot) it gave me that tingly throat burn feeling for about a minute after. I wouldn't say it's a bad flavour just, I wouldn't give it the review most are. (Btw it's not the PG affecting me) :confused:
been waiting to get this Hana Modz... but the battery life sucksI know someone who would be interested in a review of this mod. What is your definition of "battery life sucks"?MoreShow Image(http://i.imgur.com/m3tAZBY.jpg)
i must recharge the battery after 30 minutes of vapetimeWow....
from where you buy that zenith ?
Guys... What would you consider the Ergodox of the Vaporizer World.Gas station disposable maybe?
Guys... What would you consider the Ergodox of the Vaporizer World.Gas station disposable maybe?
Alright.. Got my order list togetherThats a good start. You might want to think of adding another tank in there so you can switch flavors. Protank 3 mini seems to be working well for me and I think the same coils work for both the protank 3 mini and the aerotank mini. But yea, get a second tank.
joye-c-twist 1000mah,
joye-c-twist 650mah,
charger,
aerotank mini,
replacement coils
watermelon liquid
vanilla liquid
am I missing anything guys?
Show Image(http://emoticoner.com/files/emoticons/onion-head/hehe-onion-head-emoticon.gif?1292862507)
I am so tired of watching reviews with big-fat-ugly-dudez..Show Image(http://emoticoner.com/files/emoticons/onion-head/uhuhuh-onion-head-emoticon.gif?1292862523)
Where be all the h0t chix..
There's only this kinda puffy chic, and this super skinny one that looks like she's been sick for a whole year. Don't get me wrong, they do great reviews... I really appreciate their uploads.
I am so tired of watching reviews with big-fat-ugly-dudez..Show Image(http://emoticoner.com/files/emoticons/onion-head/uhuhuh-onion-head-emoticon.gif?1292862523)
Where be all the h0t chix..
There's only this kinda puffy chic, and this super skinny one that looks like she's been sick for a whole year. Don't get me wrong, they do great reviews... I really appreciate their uploads.
My favorite reviewers are Grim Green and Rip Trippers(even though he can get annoying). Both men, but I wouldn't say fat and ugly :P
I prefer igetcha69, vapingwithtwisted420 and Todd e-cig reviews. I don't have the patience to sit through Grimm's vlogs and rip is just annoying to me these days
I NEED A NEW ATTY AND JUICE
As soon as I can afford **** again.
I am so tired of watching reviews with big-fat-ugly-dudez..Show Image(http://emoticoner.com/files/emoticons/onion-head/uhuhuh-onion-head-emoticon.gif?1292862523)
Where be all the h0t chix..
There's only this kinda puffy chic, and this super skinny one that looks like she's been sick for a whole year. Don't get me wrong, they do great reviews... I really appreciate their uploads.
My favorite reviewers are Grim Green and Rip Trippers(even though he can get annoying). Both men, but I wouldn't say fat and ugly :P
You and rip....
....that beard on beard action.....
I NEED A NEW ATTY AND JUICE
As soon as I can afford **** again.
I NEED A NEW ATTY AND JUICE
As soon as I can afford **** again.
Get a tobh. It'y by far my favorite dripper
Also, dripper and mech. mods are the best
I NEED A NEW ATTY AND JUICE
As soon as I can afford **** again.
Get a tobh. It'y by far my favorite dripper
Also, dripper and mech. mods are the best
how come they don't have a thing. where it squirts a little juice onto the coil with a button press. and this is all one box..
also, why the hell even have coils.. just have a small reservoir that heats up..
the more I think about it.. the more I think this is just designed for convenience in machining... rather than trying to make the best device possible.
I NEED A NEW ATTY AND JUICE
As soon as I can afford **** again.
Get a tobh. It'y by far my favorite dripper
Also, dripper and mech. mods are the best
how come they don't have a thing. where it squirts a little juice onto the coil with a button press. and this is all one box..
also, why the hell even have coils.. just have a small reservoir that heats up..
the more I think about it.. the more I think this is just designed for convenience in machining... rather than trying to make the best device possible.
There's the 3D, which is an "auto-dripper". A dripper style atomizer with a bottom reservoir. Push the top, it wicks more juice onto the deck.
There's also make "kraken" style atomizers, that is like the 3D, except the wicks just hang into the juice reservoir. However, I've heard they're prone to leaking
There's also certain box mods that have a 10ml bottom that does basically the same thing. You squeeze the bottle, juice flows up a tube into the atomizer's deck. I think they call them "fogger boxes" but I'm not 100%
I NEED A NEW ATTY AND JUICE
As soon as I can afford **** again.
Get a tobh. It'y by far my favorite dripper
Also, dripper and mech. mods are the best
how come they don't have a thing. where it squirts a little juice onto the coil with a button press. and this is all one box..
also, why the hell even have coils.. just have a small reservoir that heats up..
the more I think about it.. the more I think this is just designed for convenience in machining... rather than trying to make the best device possible.
There's the 3D, which is an "auto-dripper". A dripper style atomizer with a bottom reservoir. Push the top, it wicks more juice onto the deck.
There's also make "kraken" style atomizers, that is like the 3D, except the wicks just hang into the juice reservoir. However, I've heard they're prone to leaking
There's also certain box mods that have a 10ml bottom that does basically the same thing. You squeeze the bottle, juice flows up a tube into the atomizer's deck. I think they call them "fogger boxes" but I'm not 100%
The kraken is a Genesis style atomizer. They have a reservoir underneath the deck and the wicks extend down through the tank to soak up the juice and wick it to the coils. Downside to this design is they do indeed leak if left on their side too long.
An alternative to this design is rebuildable silica atomizers such as the squape and kayfun. They have a juice reservoir surrounding the build deck, which is housed inside of a chimney to the drip tip. The wicks are located at the ends of juice channels that allow juice to flow in from the reservoir. They don't have as good of flavor as genesis style atomizers in my opinion, but they don't typically leak.
There are also rebuildable cartomizer-style tanks that have the juice suspended in a kind of foam above the coil deck that wick automatically. The two main pioneers of that style are both from go, the heron and the spheroid. They're good at what they do, but require you to buy more foam periodically which is really only used in those two atomizers and a sparse couple others.
The most common style of bottom-fed atomizer mod like the one your taking about is the reo grand mod. It's essentially a mechanical mod with a dripper bottle inside like the_beast was saying. You squeeze on the bottle and juice flows through the 510 connection into the center post of the atomizer and gets wicked from there. Downside to the design is you're fairly limited on what kind of atomizers can actually take advantage of the design.
I spend quite a bit of time researching vaping devices these days, so feel free to ask me if you have any questions and I'll do my best to answer.
Halverson lead me here a few night ago. It's a crowd source fund for an induction vape. No coils, no wick. It sounds very interesting. Check it out. Perhaps it's the future of e-ciggs?
https://www.indiegogo.com/projects/evoke-the-first-smart-vaporizer-powered-by-induction
I NEED A NEW ATTY AND JUICE
As soon as I can afford **** again.
Get a tobh. It'y by far my favorite dripper
Also, dripper and mech. mods are the best
how come they don't have a thing. where it squirts a little juice onto the coil with a button press. and this is all one box..
also, why the hell even have coils.. just have a small reservoir that heats up..
the more I think about it.. the more I think this is just designed for convenience in machining... rather than trying to make the best device possible.
There's the 3D, which is an "auto-dripper". A dripper style atomizer with a bottom reservoir. Push the top, it wicks more juice onto the deck.
There's also make "kraken" style atomizers, that is like the 3D, except the wicks just hang into the juice reservoir. However, I've heard they're prone to leaking
There's also certain box mods that have a 10ml bottom that does basically the same thing. You squeeze the bottle, juice flows up a tube into the atomizer's deck. I think they call them "fogger boxes" but I'm not 100%
The kraken is a Genesis style atomizer. They have a reservoir underneath the deck and the wicks extend down through the tank to soak up the juice and wick it to the coils. Downside to this design is they do indeed leak if left on their side too long.
An alternative to this design is rebuildable silica atomizers such as the squape and kayfun. They have a juice reservoir surrounding the build deck, which is housed inside of a chimney to the drip tip. The wicks are located at the ends of juice channels that allow juice to flow in from the reservoir. They don't have as good of flavor as genesis style atomizers in my opinion, but they don't typically leak.
There are also rebuildable cartomizer-style tanks that have the juice suspended in a kind of foam above the coil deck that wick automatically. The two main pioneers of that style are both from go, the heron and the spheroid. They're good at what they do, but require you to buy more foam periodically which is really only used in those two atomizers and a sparse couple others.
The most common style of bottom-fed atomizer mod like the one your taking about is the reo grand mod. It's essentially a mechanical mod with a dripper bottle inside like the_beast was saying. You squeeze on the bottle and juice flows through the 510 connection into the center post of the atomizer and gets wicked from there. Downside to the design is you're fairly limited on what kind of atomizers can actually take advantage of the design.
I spend quite a bit of time researching vaping devices these days, so feel free to ask me if you have any questions and I'll do my best to answer.
The shape reminds me of a phaserHalverson lead me here a few night ago. It's a crowd source fund for an induction vape. No coils, no wick. It sounds very interesting. Check it out. Perhaps it's the future of e-ciggs?
https://www.indiegogo.com/projects/evoke-the-first-smart-vaporizer-powered-by-induction
Pretty sure it still has a coil.. maybe the coil doesn't need to be replaced, but it still needs coils for induction..
hmmm... How is this different from what we have now... the coil heating vs the wick heating..
since it's a wick, and not a metal rod in regular inductive heaters, the wick will still need replacing after gunking up..
So.. overtime you're probably going to be replacing the same amount of material..
in the current gen stuff.. you replace the thin coil AND the wick..
in the new one.. you just replace the wick, which is probably the same size as the wick and coil in the old system.. and because it's porous.. it will still have hot spots..
The Control chip.. hmm... That could be implemented in the current coil /wick design as well, if it weren't for vapers demanding mod-ability which defeats the purpose of advanced regulation..
Overall I think if they're going to use a wick at all.. then this system isn't really improving anything
And that shape... idk... reminds me of Tv Remote.... hahaha... I don't like complex shape... but.. this is prob preference.
The shape reminds me of a phaserHalverson lead me here a few night ago. It's a crowd source fund for an induction vape. No coils, no wick. It sounds very interesting. Check it out. Perhaps it's the future of e-ciggs?
https://www.indiegogo.com/projects/evoke-the-first-smart-vaporizer-powered-by-induction
Pretty sure it still has a coil.. maybe the coil doesn't need to be replaced, but it still needs coils for induction..
hmmm... How is this different from what we have now... the coil heating vs the wick heating..
since it's a wick, and not a metal rod in regular inductive heaters, the wick will still need replacing after gunking up..
So.. overtime you're probably going to be replacing the same amount of material..
in the current gen stuff.. you replace the thin coil AND the wick..
in the new one.. you just replace the wick, which is probably the same size as the wick and coil in the old system.. and because it's porous.. it will still have hot spots..
The Control chip.. hmm... That could be implemented in the current coil /wick design as well, if it weren't for vapers demanding mod-ability which defeats the purpose of advanced regulation..
Overall I think if they're going to use a wick at all.. then this system isn't really improving anything
And that shape... idk... reminds me of Tv Remote.... hahaha... I don't like complex shape... but.. this is prob preference.Show Image(http://i.imgur.com/CaK0xFL.jpg)Show Image(http://i.imgur.com/vsRyAca.jpg)
Great looking stuff guys! Posting my Panzer clone.thats a nice looking mod and one hell of good looking tank!
Great looking stuff guys! Posting my Panzer clone.thats a nice looking mod and one hell of good looking tank!
i think it's about time we convert gh to vaporwaveShow Image(http://i.imgur.com/nReb8j5.jpg)
Alright guys I am still very new to this stuff. But tjcaustin sent me his old setup. It is a v-vid adjustable voltage battery and an iClear 30b and an iClear XI. Here is the problem. I have no issues with the XI, but the 30b doesn't want to work at all. Both coils I am guessing were brand new since both wicks on both setups were stark white. I cleaned everthing the best I could with paper towels and q-tips. I got it to work a couple times but then took the tank off without pulling the coil off the battery, filled it back up and put it back on. Now it won't hit again. The battery was fully charged this afternoon and has tons of battery life left.
I tried fiddeling with the center post and still can't get the 30b to work. After attempting the 30b the XI won't work without fiddeling with the center post on the battery as well. Ideas?
hey guys. new to the site but have been vaping for a bit. Current setup is a Vamo V5 with a patriot clone with dragon coil/wrap. here's a little bit of coil porn I made (could only run it on a friends mech though since it was sub ohm.)Nice. I never got into coil making or mechs but perhaps one day.Show Image(http://i.imgur.com/jbkqhBgl.jpg)
On another note, I lost a vape and a ProTank mini in a cab on my way home from a stag. Luckily it wasn't too expensive but it's still a *****!!dude, I know that feeling all to well. also lost a protank. was riding a friends bike and his box had a small hole in it. fit perfectly in the hole. Its now somewhere on the highway in GA.
On another note, I lost a vape and a ProTank mini in a cab on my way home from a stag. Luckily it wasn't too expensive but it's still a *****!!dude, I know that feeling all to well. also lost a protank. was riding a friends bike and his box had a small hole in it. fit perfectly in the hole. Its now somewhere on the highway in GA.
Just bought a Viggo copper mod. Love this thing. can finally build my subohms! Also vaping a mix of Mr.GoodVape moon sugar and Cuttwood Sugar Bear.
Another shot of my Vamo along with my small battery for easy carryShow Image(http://i.imgur.com/rnwHhMsl.jpg)
new mod yay!Show Image(http://i.imgur.com/tDCjc7El.jpg)
Magic Flight Launch Box in walnut with AC adapter attachment
(Attachment Link)
Hey guys! Brand new to vaping, but gained interest after browsing MassDrops vape section, and then reading this thread. I also liked the idea of being able to vape at my desk, and possibly quitting cigarettes if I like vaping enough. The rebuildables and whole hobbyist side of it sounds awesome too, I could see myself getting into that.
I ordered a beginner vape, it should be here next week. ;D
Just wondering if anyone has an opinion on the setup I picked up?
eGo-T Upgrade Battery - Titanium (1000mah, 10 hours) - Manual]
eGo-T Upgrade Battery - Titanium (650mah, 6-8 hours) - Manual]
Aspire Nautilus Mini Adjustable Airflow Tank System
And I also picked up a 5 pack of Nautilus replacement BVC coils, 1.6ohm.
Was this setup decent, or did I make a mistake? :d
Hey guys! Brand new to vaping, but gained interest after browsing MassDrops vape section, and then reading this thread. I also liked the idea of being able to vape at my desk, and possibly quitting cigarettes if I like vaping enough. The rebuildables and whole hobbyist side of it sounds awesome too, I could see myself getting into that.
I ordered a beginner vape, it should be here next week. ;D
Just wondering if anyone has an opinion on the setup I picked up?
eGo-T Upgrade Battery - Titanium (1000mah, 10 hours) - Manual]
eGo-T Upgrade Battery - Titanium (650mah, 6-8 hours) - Manual]
Aspire Nautilus Mini Adjustable Airflow Tank System
And I also picked up a 5 pack of Nautilus replacement BVC coils, 1.6ohm.
Was this setup decent, or did I make a mistake? :d
sounds like a good start to me meow. don't forget to order some juice. goodlifevapor.com. mtbakervapor.com and seducejuice.com are all good starting points for high quality and inexpensive juices.
I'm in Canada and I haven't had any problems getting nic juice to me from mount baker vapor. They also offer a little more customization with their juices for PG/VG mixes and they give you the option for extra flavor shots, which is awesome (I always get 2-3 extra shots in my 15ml bottles depending on what type of flavor I get). You can even get a bottle of up to 5 different flavors mixed into one if you want. You can select how many parts of each flavor you want in the mixture also. I did 3 parts French vanilla, 3 parts graham cracker, 1 part banana, 2 parts hazelnut and 1 part peanut butter just for fun. Very interesting flavor. You taste something different almost every time you try the flavor again. Mtbakervapor.comHey guys! Brand new to vaping, but gained interest after browsing MassDrops vape section, and then reading this thread. I also liked the idea of being able to vape at my desk, and possibly quitting cigarettes if I like vaping enough. The rebuildables and whole hobbyist side of it sounds awesome too, I could see myself getting into that.
I ordered a beginner vape, it should be here next week. ;D
Just wondering if anyone has an opinion on the setup I picked up?
eGo-T Upgrade Battery - Titanium (1000mah, 10 hours) - Manual]
eGo-T Upgrade Battery - Titanium (650mah, 6-8 hours) - Manual]
Aspire Nautilus Mini Adjustable Airflow Tank System
And I also picked up a 5 pack of Nautilus replacement BVC coils, 1.6ohm.
Was this setup decent, or did I make a mistake? :d
sounds like a good start to me meow. don't forget to order some juice. goodlifevapor.com. mtbakervapor.com and seducejuice.com are all good starting points for high quality and inexpensive juices.
Thanks for sharing your opinion! ;D My only fear is that this vape won't provide satisfying hits, but I'm really hoping it will. In the future I'd like to try a powerful vape rig that isn't very portable for at-home use, and have a smaller vape for out and about. My eGo and Nautilus will be here tomorrow!
I found a site local to my town (www.evaperated.com) that sells juices so I'm going to try them out (plus they give free samples with every order, free samples are great.. and next day shipping never hurts either :)) ). I've heard of a lot of problems shipping nic juices from the states to Canada, so I'm going to try domestic places first. I may try a small order from an American site to see if it gets through though!
I'm in Canada and I haven't had any problems getting nic juice to me from mount baker vapor. They also offer a little more customization with their juices for PG/VG mixes and they give you the option for extra flavor shots, which is awesome (I always get 2-3 extra shots in my 15ml bottles depending on what type of flavor I get). You can even get a bottle of up to 5 different flavors mixed into one if you want. You can select how many parts of each flavor you want in the mixture also. I did 3 parts French vanilla, 3 parts graham cracker, 1 part banana, 2 parts hazelnut and 1 part peanut butter just for fun. Very interesting flavor. You taste something different almost every time you try the flavor again. Mtbakervapor.comHey guys! Brand new to vaping, but gained interest after browsing MassDrops vape section, and then reading this thread. I also liked the idea of being able to vape at my desk, and possibly quitting cigarettes if I like vaping enough. The rebuildables and whole hobbyist side of it sounds awesome too, I could see myself getting into that.
I ordered a beginner vape, it should be here next week. ;D
Just wondering if anyone has an opinion on the setup I picked up?
eGo-T Upgrade Battery - Titanium (1000mah, 10 hours) - Manual]
eGo-T Upgrade Battery - Titanium (650mah, 6-8 hours) - Manual]
Aspire Nautilus Mini Adjustable Airflow Tank System
And I also picked up a 5 pack of Nautilus replacement BVC coils, 1.6ohm.
Was this setup decent, or did I make a mistake? :d
sounds like a good start to me meow. don't forget to order some juice. goodlifevapor.com. mtbakervapor.com and seducejuice.com are all good starting points for high quality and inexpensive juices.
Thanks for sharing your opinion! ;D My only fear is that this vape won't provide satisfying hits, but I'm really hoping it will. In the future I'd like to try a powerful vape rig that isn't very portable for at-home use, and have a smaller vape for out and about. My eGo and Nautilus will be here tomorrow!
I found a site local to my town (www.evaperated.com) that sells juices so I'm going to try them out (plus they give free samples with every order, free samples are great.. and next day shipping never hurts either :)) ). I've heard of a lot of problems shipping nic juices from the states to Canada, so I'm going to try domestic places first. I may try a small order from an American site to see if it gets through though!
That would be the first time I have ever heard of a battery having malware attached to it
That would be the first time I have ever heard of a battery having malware attached to it
That would be the first time I have ever heard of a battery having malware attached to it
well paicrai is one test away from being labeled retarded so yeah, take anything he says and throw it out the window.
That would be the first time I have ever heard of a battery having malware attached to it
well paicrai is one test away from being labeled retarded so yeah, take anything he says and throw it out the window.
+1
apparently e-cigs can give u malware if u plug it in with usb in ur computer to chargeimplying you can plug in mechs
Nice to see there's a small vaping community here :D
I've been vaping for a year and a half now and have used a couple of mods but mostly, local ones(I'm from the philippines).
First one: Teletorpe body with Vivi Nova tank
Second: Launcher v2 with Nimbus atty
Third: Sioux with Immortalizer
Fourth: Cambio DNA30D with Immortalizer+(actually waiting for this might come this December)
Will edit with pics. Too lazy as of now to dig for them.
Nice to see there's a small vaping community here :D
I've been vaping for a year and a half now and have used a couple of mods but mostly, local ones(I'm from the philippines).
First one: Teletorpe body with Vivi Nova tank
Second: Launcher v2 with Nimbus atty
Third: Sioux with Immortalizer
Fourth: Cambio DNA30D with Immortalizer+(actually waiting for this might come this December)
Will edit with pics. Too lazy as of now to dig for them.
I want to get another dna box, like a vaporshark (so tiny), but I kinda want that new sigelli 100w thing
Nice to see there's a small vaping community here :D
I've been vaping for a year and a half now and have used a couple of mods but mostly, local ones(I'm from the philippines).
First one: Teletorpe body with Vivi Nova tank
Second: Launcher v2 with Nimbus atty
Third: Sioux with Immortalizer
Fourth: Cambio DNA30D with Immortalizer+(actually waiting for this might come this December)
Will edit with pics. Too lazy as of now to dig for them.
I want to get another dna box, like a vaporshark (so tiny), but I kinda want that new sigelli 100w thing
I think the Sigelli 100w is one of the better/reliable box mods out there. Stellar reviews so far, I just got a cloudpor and I wish I got the sigelli.
Heres my setups:Show Image(http://i.imgur.com/YurltMX.jpg)Show Image(http://i.imgur.com/8soNkDe.jpg)
So I have an MVP 2.0 with an Iclear tank which is a bottom dual coil setup, what is the recommended position to keep it in overnight to prevent gurggling in the morning? I have mostly been using 50/50 but have tried 20/50 and still floods from time to time. Is this just a limitation of the setup?
Holy crap is that 60 watts? O.O I was gonna say that I don't really like the idea of anything over 30 watts cause really I myself only use 26 watts at most but then here you are. Wow.
Nice to see there's a small vaping community here :D
I've been vaping for a year and a half now and have used a couple of mods but mostly, local ones(I'm from the philippines).
First one: Teletorpe body with Vivi Nova tank
Second: Launcher v2 with Nimbus atty
Third: Sioux with Immortalizer
Fourth: Cambio DNA30D with Immortalizer+(actually waiting for this might come this December)
Will edit with pics. Too lazy as of now to dig for them.
I want to get another dna box, like a vaporshark (so tiny), but I kinda want that new sigelli 100w thing
I think the Sigelli 100w is one of the better/reliable box mods out there. Stellar reviews so far, I just got a cloudpor and I wish I got the sigelli.
Heres my setups:Show Image(http://i.imgur.com/YurltMX.jpg)Show Image(http://i.imgur.com/8soNkDe.jpg)
not sure what you are reading sir, but the sigelie 100w is total garbage and has awful reviews
sadly i have one
the issue is, it has a really nasty screw in pin to adjust to your rda, and the way they did the threads means it wiggles around a bit, so your ohms will fly up from like 0.4 to 2.2 to 1.8 to 0.1
just all over the place, giving it a really inconsistent and nasty vape
so if your rda doesnt have a super long 510 or a very good adjustable one its unusable, its works well on my plume veil and the tugboat v2 occasionally, but anything else is borderline dangerous, and i know tons of people with the same issue
for anyone looking for a good box mod, the new rdna40 vaporshark is great
cut down on ciggys and started vaping days ago on my birthday.Show Image(http://i.imgur.com/08ZCvvy.jpg)
feels good mannnnn
some of my hardware these daysShow Image(http://i.imgur.com/wv5hoHml.jpg)
cut down on ciggys and started vaping days ago on my birthday.Show Image(http://i.imgur.com/08ZCvvy.jpg)
feels good mannnnn
Wow that your first mod?some of my hardware these daysShow Image(http://i.imgur.com/wv5hoHml.jpg)
Liking the last one on the right. Steampunk <3
rebuilt both of my RDAs using a twisted/braided cable. so much flavor with the twisted builds!
plume veilShow Image(http://i.imgur.com/BbY5RvH.jpg)
tugboatShow Image(http://i.imgur.com/khHWZeY.jpg)
rebuilt both of my RDAs using a twisted/braided cable. so much flavor with the twisted builds!
plume veilShow Image(http://i.imgur.com/BbY5RvH.jpg)
tugboatShow Image(http://i.imgur.com/khHWZeY.jpg)
you twisted on your own using a drill?
I'm honestly surprised you haven't made yourself a wooden box mod beast. lol
I'm honestly surprised you haven't made yourself a wooden box mod beast. lol
I have a box mod that I made with wood in it...Show Image(http://i.imgur.com/Y1unZ4A.jpg)
Purpleheart backing materialShow Image(http://i.imgur.com/plIRI5j.jpg)
3d printed stainless steel LCD coverShow Image(http://i.imgur.com/ykpb3uj.jpg)
Not overly impressed by the DNA 30 so I moved to mech mods
I'm honestly surprised you haven't made yourself a wooden box mod beast. lol
I have a box mod that I made with wood in it...Show Image(http://i.imgur.com/Y1unZ4A.jpg)
Purpleheart backing materialShow Image(http://i.imgur.com/plIRI5j.jpg)
3d printed stainless steel LCD coverShow Image(http://i.imgur.com/ykpb3uj.jpg)
Not overly impressed by the DNA 30 so I moved to mech mods
looks wicked. maybe digital mods aren't your type but vaping at 20watts is da bomb. i still don't understand how can people vape at 50, even 100watts. 30 watts is enough to choke me.
I'm honestly surprised you haven't made yourself a wooden box mod beast. lol
I have a box mod that I made with wood in it...Show Image(http://i.imgur.com/Y1unZ4A.jpg)
Purpleheart backing materialShow Image(http://i.imgur.com/plIRI5j.jpg)
3d printed stainless steel LCD coverShow Image(http://i.imgur.com/ykpb3uj.jpg)
Not overly impressed by the DNA 30 so I moved to mech mods
looks wicked. maybe digital mods aren't your type but vaping at 20watts is da bomb. i still don't understand how can people vape at 50, even 100watts. 30 watts is enough to choke me.
I tend to go for about .18 ohms for my coil, with a fresh charged battery, that's around 100w. It's perfect for me
I have a box mod that I made with wood in it...
Not overly impressed by the DNA 30 so I moved to mech mods
I'm honestly surprised you haven't made yourself a wooden box mod beast. lol
I have a box mod that I made with wood in it...Show Image(http://i.imgur.com/Y1unZ4A.jpg)
Purpleheart backing materialShow Image(http://i.imgur.com/plIRI5j.jpg)
3d printed stainless steel LCD coverShow Image(http://i.imgur.com/ykpb3uj.jpg)
Not overly impressed by the DNA 30 so I moved to mech mods
i second thisI'm honestly surprised you haven't made yourself a wooden box mod beast. lol
I have a box mod that I made with wood in it...Show Image(http://i.imgur.com/Y1unZ4A.jpg)
Purpleheart backing materialShow Image(http://i.imgur.com/plIRI5j.jpg)
3d printed stainless steel LCD coverShow Image(http://i.imgur.com/ykpb3uj.jpg)
Not overly impressed by the DNA 30 so I moved to mech mods
in for gb
i second thisI'm honestly surprised you haven't made yourself a wooden box mod beast. lol
I have a box mod that I made with wood in it...Show Image(http://i.imgur.com/Y1unZ4A.jpg)
Purpleheart backing materialShow Image(http://i.imgur.com/plIRI5j.jpg)
3d printed stainless steel LCD coverShow Image(http://i.imgur.com/ykpb3uj.jpg)
Not overly impressed by the DNA 30 so I moved to mech mods
in for gb
i second thisI'm honestly surprised you haven't made yourself a wooden box mod beast. lol
I have a box mod that I made with wood in it...Show Image(http://i.imgur.com/Y1unZ4A.jpg)
Purpleheart backing materialShow Image(http://i.imgur.com/plIRI5j.jpg)
3d printed stainless steel LCD coverShow Image(http://i.imgur.com/ykpb3uj.jpg)
Not overly impressed by the DNA 30 so I moved to mech mods
in for gb
The inside is a rats nest and the stainless steel cap is a nightmare to solder leads to. I do have another DNA30 board that isn't in use right now (I killed my first board by reversing + and - :( and I was SUPER pissed)
i second thisI'm honestly surprised you haven't made yourself a wooden box mod beast. lol
I have a box mod that I made with wood in it...Show Image(http://i.imgur.com/Y1unZ4A.jpg)
Purpleheart backing materialShow Image(http://i.imgur.com/plIRI5j.jpg)
3d printed stainless steel LCD coverShow Image(http://i.imgur.com/ykpb3uj.jpg)
Not overly impressed by the DNA 30 so I moved to mech mods
in for gb
The inside is a rats nest and the stainless steel cap is a nightmare to solder leads to. I do have another DNA30 board that isn't in use right now (I killed my first board by reversing + and - :( and I was SUPER pissed)
i actually have a few dna 30 and 40 boards kicking around, id be super interested if you would consider even doing a limited run of boxes, so we can just pop the boards in ourselves
i second thisI'm honestly surprised you haven't made yourself a wooden box mod beast. lol
I have a box mod that I made with wood in it...Show Image(http://i.imgur.com/Y1unZ4A.jpg)
Purpleheart backing materialShow Image(http://i.imgur.com/plIRI5j.jpg)
3d printed stainless steel LCD coverShow Image(http://i.imgur.com/ykpb3uj.jpg)
Not overly impressed by the DNA 30 so I moved to mech mods
in for gb
The inside is a rats nest and the stainless steel cap is a nightmare to solder leads to. I do have another DNA30 board that isn't in use right now (I killed my first board by reversing + and - :( and I was SUPER pissed)
i actually have a few dna 30 and 40 boards kicking around, id be super interested if you would consider even doing a limited run of boxes, so we can just pop the boards in ourselves
Hmmm, that's interesting! The photos are slightly misleading. I don't have a drill for the hole of the 510, so I had to file it and it's far from perfect. And the paint, it's ok, but nothing great. And the lid, I tried doing a magnetic closing lid, also not working all that great, but it might be due to the rats nest inside it pushing it off.Show Image(http://i.imgur.com/tCQaihU.jpg)Show Image(http://i.imgur.com/XVVzcyY.jpg)
A few recent buildslooks beautiful. Probably get some serious vapor production out of those coils?Show Image(http://i.imgur.com/z6yUlyI.jpg)Show Image(http://i.imgur.com/WRJFRUh.jpg)Show Image(http://i.imgur.com/XObigJX.jpg)Show Image(http://i.imgur.com/omajzv1.jpg)
A few recent buildsShow Image(http://i.imgur.com/z6yUlyI.jpg)Show Image(http://i.imgur.com/WRJFRUh.jpg)Show Image(http://i.imgur.com/XObigJX.jpg)Show Image(http://i.imgur.com/omajzv1.jpg)
I would guesstimate .45Ω, .5Ω, .2Ω and .2-.3Ω respectively.
quick pic of my super stealth setupShow Image(http://i.imgur.com/fsZqysll.jpg)
A few recent buildsShow Image(http://i.imgur.com/z6yUlyI.jpg)Show Image(http://i.imgur.com/WRJFRUh.jpg)Show Image(http://i.imgur.com/XObigJX.jpg)Show Image(http://i.imgur.com/omajzv1.jpg)
Whats the resistance on those builds?
A few recent buildslooks beautiful. Probably get some serious vapor production out of those coils?Show Image(http://i.imgur.com/z6yUlyI.jpg)Show Image(http://i.imgur.com/WRJFRUh.jpg)Show Image(http://i.imgur.com/XObigJX.jpg)Show Image(http://i.imgur.com/omajzv1.jpg)
Thanks! and yeah they're fun. Only use the clapton for comps though.
can you guys give a few good sites to buy juice?
I'm new to this, i have a basic vaporin kit which looks like an ego; bought it overseas in the summer, and finally the juice in it is finishing it was disgusting (never buy vaporin juice). But, without juice a vape is nothing, so any help is highly appreciated!
Thanks! and yeah they're fun. Only use the clapton for comps though.
Why the clapton? Also do you use pure VG or something else?
claptons have a lot more surface area giving more sites for atomization of the liquid. some cloud comps actually limit coils to twisted only etc excluding claptons from competing.
Show Image(http://i.imgur.com/gNIFHM4.jpg)Show Image(http://i.imgur.com/xCeljMW.jpg)Show Image(http://i.imgur.com/DBrHaB6.jpg)
Show Image(http://i.imgur.com/gNIFHM4.jpg)Show Image(http://i.imgur.com/xCeljMW.jpg)Show Image(http://i.imgur.com/DBrHaB6.jpg)
Show Image(http://i.imgur.com/gNIFHM4.jpg)Show Image(http://i.imgur.com/xCeljMW.jpg)Show Image(http://i.imgur.com/DBrHaB6.jpg)
Is ctrlalt expanding beyond keyboards? :eek:
I don't think a keyboard switch has the current carrying capacity needed for an apv. just something to consider.
I don't think a keyboard switch has the current carrying capacity needed for an apv. just something to consider.
we got science sir
I don't think a keyboard switch has the current carrying capacity needed for an apv. just something to consider.mosfet yo. completely possible. also I'd buy it in an instant.
I don't think a keyboard switch has the current carrying capacity needed for an apv. just something to consider.mosfet yo. completely possible. also I'd buy it in an instant.
I'm about to make my series box...I may put an mx blue on it now.I don't think a keyboard switch has the current carrying capacity needed for an apv. just something to consider.mosfet yo. completely possible. also I'd buy it in an instant.
yeah thats what we use in the one above, its actually running in series kicking out 8v, shes a monster
but the mx ones will be in parallel for a more traditional vape
I don't think a keyboard switch has the current carrying capacity needed for an apv. just something to consider.mosfet yo. completely possible. also I'd buy it in an instant.
yeah thats what we use in the one above, its actually running in series kicking out 8v, shes a monster
but the mx ones will be in parallel for a more traditional vape
I've heard from a coworker that you can get USB powered batteries that hook straight into your clearomizer from a port on your computer, thereby allowing you to vape sitting at your desk allllllll day. Anyone else know of this?
I've heard from a coworker that you can get USB powered batteries that hook straight into your clearomizer from a port on your computer, thereby allowing you to vape sitting at your desk allllllll day. Anyone else know of this?
Thats what the passthrough feature does
Ayy, a couple more builds. I don't like that the MutationXV2 is smaller inside than the Plume, but the deep well and bigger post holes are a huge plus. and the airflow is so much more.Show Image(http://i.imgur.com/ggyQEsn.jpg)Show Image(http://i.imgur.com/k2orkEK.jpg)Show Image(http://i.imgur.com/wROkDKm.jpg)Show Image(http://i.imgur.com/HC3XCii.jpg)Show Image(http://i.imgur.com/Rtigr3P.jpg)Show Image(http://i.imgur.com/EVVRubl.jpg)Show Image(http://i.imgur.com/mPXVNuN.jpg)
24g twist then claptoned with 30g. came out to round .18 I think.Ayy, a couple more builds. I don't like that the MutationXV2 is smaller inside than the Plume, but the deep well and bigger post holes are a huge plus. and the airflow is so much more.Show Image(http://i.imgur.com/ggyQEsn.jpg)Show Image(http://i.imgur.com/k2orkEK.jpg)Show Image(http://i.imgur.com/wROkDKm.jpg)Show Image(http://i.imgur.com/HC3XCii.jpg)Show Image(http://i.imgur.com/Rtigr3P.jpg)Show Image(http://i.imgur.com/EVVRubl.jpg)Show Image(http://i.imgur.com/mPXVNuN.jpg)
Those coils look sick! What is the third one?
Have any of you guys ever had a store employee say something to you for vaping in say WalMart or another chain department store like that? Here in Iowa, we have the Clean Air Act, which bans smoking in all public and government buildings. However, there vaping is still technically legal. Just wondering if anyone has had any experiences with it.Got told to stop a few times in bars. Of all places.
My wife tried getting on me about it in Wal Mart. That didn't last long. Though I don't do it in places like church and what not. Though nobody has said anything in the theater yet.
I'm looking at getting a Kanger Emow for my first vape, what does everyone think? Them seem like pretty good value for the price compared to other local options.
Cheers mate!I'm looking at getting a Kanger Emow for my first vape, what does everyone think? Them seem like pretty good value for the price compared to other local options.
Not really my style but the reviews look good, if you're hoping for a ton of vapor it's not a great choice but if you just want flavor it'll probably be fine.
Hey all, been in hibernation.
So I started vaping about a month ago -- I have one of the starter kits from a store, it's a kangertech evod tank -- battery unknown but it's not very good.
I've been looking at a couple mods:
- BTC Pro -- http://www.smoktech.com/product_10047.html
- Sigelei 150 watt Box Mod -- http://101vape.com/variable-voltagewattage-devices/544-sigelei-150-watt-box-mod.html
- Some 26650 mechanical mod
I know absolutely nothing about coils and etc -- I know a little about the best batteries to buy (Sony VTC5 for example) -- My biggest concern is price and usability. I often go on the road for long periods of time and want to be able to build a kit as well as the necessary tools to get a good vape but still maintain simple usability while on the road. I don't know how long coils last, or how much time it takes to make the perfect one. I don't have much free time while on the road, and I can't afford to spend an hour every day messing with a mod unit. I'm not sure if these thoughts are going over the top -- but I always talk to pro vapers and they go into detail about their build and I get the assumption that it is something they spend a lot of time on. I will say that I've tried them and I like the heat and kick from them much better than my tank mods that I've tried.
Thoughts?
Edit: battery life is a big concern of mine too. I don't mind having a charger with me but want something that'll definitely last all day. I'll only step out to vape every once and a while, not constantly.
That doesn't sound too bad at all actually.
A couple of questions for you:
- Someone told me that they are able to "clean" their coils before replacing, is this true?
- What is a gold standard for the 26650 battery?
- Is it better to go with a 18650 or 26650? I hear 26650 will have more power than most 18650s but not necessarily more battery life
- What do you think of unregulated mods? I have my eye on one of these: http://www.ebay.com/itm/Unregulated-Box-Mod-Dual-26650-Parallel-Mosfet-Protected-/111605558674?pt=LH_DefaultDomain_0&hash=item19fc35ad92 -- (I don't know what a mosfet would be for in terms of vaping)
- What is good to look for in a mod? Is a clone necessarily a bad thing? I see they are much cheaper.
- What do you look for in a RDA? I'm looking at this vulcan one, I like the fact that doesn't require any tools to replace the coils, merely screw and done -- http://www.vapordna.com/Vulcan-RDA-Rebuildable-Atomizer-p/vn0001.htm
- Safety and travelling. I travel a lot so I assume the safest bet is to remove the batteries from the boxmod/regular mod so the trigger doesn't fire when it is in my bag. I haven't had a problem with this for my small unit because it has the five clicks
- What do you look for in making a coil, how much does resistance come into play? Do I want to get an ohm meter? -- I've seen a lot of the rip trippers and crazy coils that they make, not sure if I want/need something this complicated but don't mind making a couple in bulk and bringing them with me in little bubble wrap bags
I REALLY appreciate your input man thanks.
That doesn't sound too bad at all actually.
A couple of questions for you:
- Someone told me that they are able to "clean" their coils before replacing, is this true?
- What is a gold standard for the 26650 battery?
- Is it better to go with a 18650 or 26650? I hear 26650 will have more power than most 18650s but not necessarily more battery life
- What do you think of unregulated mods? I have my eye on one of these: http://www.ebay.com/itm/Unregulated-Box-Mod-Dual-26650-Parallel-Mosfet-Protected-/111605558674?pt=LH_DefaultDomain_0&hash=item19fc35ad92 -- (I don't know what a mosfet would be for in terms of vaping)
- What is good to look for in a mod? Is a clone necessarily a bad thing? I see they are much cheaper.
- What do you look for in a RDA? I'm looking at this vulcan one, I like the fact that doesn't require any tools to replace the coils, merely screw and done -- http://www.vapordna.com/Vulcan-RDA-Rebuildable-Atomizer-p/vn0001.htm
- Safety and travelling. I travel a lot so I assume the safest bet is to remove the batteries from the boxmod/regular mod so the trigger doesn't fire when it is in my bag. I haven't had a problem with this for my small unit because it has the five clicks
- What do you look for in making a coil, how much does resistance come into play? Do I want to get an ohm meter? -- I've seen a lot of the rip trippers and crazy coils that they make, not sure if I want/need something this complicated but don't mind making a couple in bulk and bringing them with me in little bubble wrap bags
I REALLY appreciate your input man thanks.
That doesn't sound too bad at all actually.As far as your first question goes, it's been answered already but I believe it's called a "dry burn". Burns the crap off the coil and you can get maybe a few more days out of it. Longer depending on how often/how to use it.
A couple of questions for you:
- Someone told me that they are able to "clean" their coils before replacing, is this true?
- What is a gold standard for the 26650 battery?
- Is it better to go with a 18650 or 26650? I hear 26650 will have more power than most 18650s but not necessarily more battery life
- What do you think of unregulated mods? I have my eye on one of these: http://www.ebay.com/itm/Unregulated-Box-Mod-Dual-26650-Parallel-Mosfet-Protected-/111605558674?pt=LH_DefaultDomain_0&hash=item19fc35ad92 -- (I don't know what a mosfet would be for in terms of vaping)
- What is good to look for in a mod? Is a clone necessarily a bad thing? I see they are much cheaper.
- What do you look for in a RDA? I'm looking at this vulcan one, I like the fact that doesn't require any tools to replace the coils, merely screw and done -- http://www.vapordna.com/Vulcan-RDA-Rebuildable-Atomizer-p/vn0001.htm
- Safety and travelling. I travel a lot so I assume the safest bet is to remove the batteries from the boxmod/regular mod so the trigger doesn't fire when it is in my bag. I haven't had a problem with this for my small unit because it has the five clicks
- What do you look for in making a coil, how much does resistance come into play? Do I want to get an ohm meter? -- I've seen a lot of the rip trippers and crazy coils that they make, not sure if I want/need something this complicated but don't mind making a couple in bulk and bringing them with me in little bubble wrap bags
I REALLY appreciate your input man thanks.
After trying a friend's mod with this setup, I might be sold on:
- BEC Pro 50W (bluetooth too) -- http://www.smoktech.com/product_10047.html
- Aspire Atlantis -- http://www.aspirecig.com/products/Atlantis/atlantis183.html
Excellent flavor, huge clouds and hits like a truck.
Edit: uhoh, looks like bad news for the aspire atlantis -- http://forum.aspirecig.com/viewtopic.php?f=15&t=16958
Ugh.
After trying a friend's mod with this setup, I might be sold on:
- BEC Pro 50W (bluetooth too) -- http://www.smoktech.com/product_10047.html
- Aspire Atlantis -- http://www.aspirecig.com/products/Atlantis/atlantis183.html
Excellent flavor, huge clouds and hits like a truck.
Edit: uhoh, looks like bad news for the aspire atlantis -- http://forum.aspirecig.com/viewtopic.php?f=15&t=16958
Ugh.
Hrrmm that's disappointing about the Atlantis, looks like I'll have to go with the Kanger Subtank Mini for my next clearo. After a couple of days using my EMOW I'm still happy with it but I need something with a longer lasting battery and more adjustability, the voltage settings on the EMOW aren't very versatile and I'm finding I need to recharge towards the end of the day/evening.
After trying a friend's mod with this setup, I might be sold on:
- BEC Pro 50W (bluetooth too) -- http://www.smoktech.com/product_10047.html
- Aspire Atlantis -- http://www.aspirecig.com/products/Atlantis/atlantis183.html
Excellent flavor, huge clouds and hits like a truck.
Edit: uhoh, looks like bad news for the aspire atlantis -- http://forum.aspirecig.com/viewtopic.php?f=15&t=16958
Ugh.
Hrrmm that's disappointing about the Atlantis, looks like I'll have to go with the Kanger Subtank Mini for my next clearo. After a couple of days using my EMOW I'm still happy with it but I need something with a longer lasting battery and more adjustability, the voltage settings on the EMOW aren't very versatile and I'm finding I need to recharge towards the end of the day/evening.
If you read further, aspire states that all their premade coils will be organic cotton only from now on...
Been using my sigelei 150w and kanger subtank mini for a week now, the mini outperformed atlantis in flavour, now my atlantis get back in the box.
I only use sigelei at home and istick 30w for going out because of the size, good size to slip in to the pocket. The 30w will last me roughly 4-5ml of liquid @ 20-25 watt before died on me.
I think if money not an issue getting the istick 50w would be a better choice, it's only a little bit bigger than the 30's but last longer, twice or even more than the 30's.
Been using my sigelei 150w and kanger subtank mini for a week now, the mini outperformed atlantis in flavour, now my atlantis get back in the box.
I only use sigelei at home and istick 30w for going out because of the size, good size to slip in to the pocket. The 30w will last me roughly 4-5ml of liquid @ 20-25 watt before died on me.
I think if money not an issue getting the istick 50w would be a better choice, it's only a little bit bigger than the 30's but last longer, twice or even more than the 30's.
Yeah I was tempted by the Sigelei 100W but decided to stay on the cheap end with the iStick because I'll probably want to DIY a variable wattage box at some point in the future so I'll save the cash. Can't resist another chance to make something one of a kind, it's as bad as keyboards I tell you!
Been using my sigelei 150w and kanger subtank mini for a week now, the mini outperformed atlantis in flavour, now my atlantis get back in the box.
I only use sigelei at home and istick 30w for going out because of the size, good size to slip in to the pocket. The 30w will last me roughly 4-5ml of liquid @ 20-25 watt before died on me.
I think if money not an issue getting the istick 50w would be a better choice, it's only a little bit bigger than the 30's but last longer, twice or even more than the 30's.
Yeah I was tempted by the Sigelei 100W but decided to stay on the cheap end with the iStick because I'll probably want to DIY a variable wattage box at some point in the future so I'll save the cash. Can't resist another chance to make something one of a kind, it's as bad as keyboards I tell you!
I know exactly how you feel... I didn't like what was available so I had to DIY a variable wattage box mod. ;-)
Been using my sigelei 150w and kanger subtank mini for a week now, the mini outperformed atlantis in flavour, now my atlantis get back in the box.
I only use sigelei at home and istick 30w for going out because of the size, good size to slip in to the pocket. The 30w will last me roughly 4-5ml of liquid @ 20-25 watt before died on me.
I think if money not an issue getting the istick 50w would be a better choice, it's only a little bit bigger than the 30's but last longer, twice or even more than the 30's.
Yeah I was tempted by the Sigelei 100W but decided to stay on the cheap end with the iStick because I'll probably want to DIY a variable wattage box at some point in the future so I'll save the cash. Can't resist another chance to make something one of a kind, it's as bad as keyboards I tell you!
I know exactly how you feel... I didn't like what was available so I had to DIY a variable wattage box mod. ;-)
Damn man, beautiful work. The internals are probably the cleanest I've ever seen on a DIY box! Is that a circuit you came up with yourself to regulate the wattage or a prebuilt one? Interested in the button/screen shroud too, is that 3D printed?
Been using my sigelei 150w and kanger subtank mini for a week now, the mini outperformed atlantis in flavour, now my atlantis get back in the box.
I only use sigelei at home and istick 30w for going out because of the size, good size to slip in to the pocket. The 30w will last me roughly 4-5ml of liquid @ 20-25 watt before died on me.
I think if money not an issue getting the istick 50w would be a better choice, it's only a little bit bigger than the 30's but last longer, twice or even more than the 30's.
Yeah I was tempted by the Sigelei 100W but decided to stay on the cheap end with the iStick because I'll probably want to DIY a variable wattage box at some point in the future so I'll save the cash. Can't resist another chance to make something one of a kind, it's as bad as keyboards I tell you!
I know exactly how you feel... I didn't like what was available so I had to DIY a variable wattage box mod. ;-)
Damn man, beautiful work. The internals are probably the cleanest I've ever seen on a DIY box! Is that a circuit you came up with yourself to regulate the wattage or a prebuilt one? Interested in the button/screen shroud too, is that 3D printed?
I designed it and built a few. Custom PCBs from OSH Park, mostly SMT parts. 3D printed bezel/button caps from Shapeways. I got lazy and used an Arduino Pro Mini, which controls a Raptor 20A regulator via a digital potentiometer, and a hall effect current sensor to measure current and allow variable wattage. It can do 120W but I mostly vape 40W on a TOBH with Chuff top cap.
Hey all, Have any of you guys considered making your own e-liquid. I started making my own a few months ago and it has saved my tons of money. Its also always fun acting like I'm a chemist mixing the PG, VG and nicotine. If you guys have I'd like to know who your turned out and what distributors you go to.
I go to Hartland Vapes (http://wholesale.heartlandvapes.com/)
Nicotine Solution - 100mg Liter-$44 USD
Vegetable Glycerin - USP Kosher - 1 Gallon -$27.99
Propylene Glycol - USP Kosher - 1 Gallon-$29.99
Then I get my flavoring from MT. Baker Vapor.(http://www.mtbakervapor.com) I really enjoy their flavoring.
Mt.Baker flavoring - $3 for 15 ml of concentrated flavoring
Anyone else know any tips and tricks let me know. Thanks.
After trying a friend's mod with this setup, I might be sold on:
- BEC Pro 50W (bluetooth too) -- http://www.smoktech.com/product_10047.html
- Aspire Atlantis -- http://www.aspirecig.com/products/Atlantis/atlantis183.html
Excellent flavor, huge clouds and hits like a truck.
Edit: uhoh, looks like bad news for the aspire atlantis -- http://forum.aspirecig.com/viewtopic.php?f=15&t=16958
Ugh.
Hrrmm that's disappointing about the Atlantis, looks like I'll have to go with the Kanger Subtank Mini for my next clearo. After a couple of days using my EMOW I'm still happy with it but I need something with a longer lasting battery and more adjustability, the voltage settings on the EMOW aren't very versatile and I'm finding I need to recharge towards the end of the day/evening.
If you read further, aspire states that all their premade coils will be organic cotton only from now on...
I Vape thread, Im home :PShow Image(http://i.imgur.com/1p4HZQY.jpg)Show Image(http://i.imgur.com/D2h3nDK.jpg)
So I just picked up the Kanger Subtank Mini a couple days ago, and it's been really great. Definitely a nice upgrade to my Aspire Nautilus I was using before. Works great with my MVP 3.0.
The mini-RBA is pretty neat, I've never tried making a coil before so I've now had the opportunity. Seems like something that could be cool to get into more seriously later on.
Anyone else have the Subtank, or an Atlantis?
I went with the Subtank over the Atlantis because of the rebuildable coils, and the bigger liquid capacity.
I've been vaping for a few months now, switching over from cigarettes. (I was smoking for 2 years prior to switching, so I'm nicotine dependent.) I got a Kangertech E-Vod, and it's worked well, the original coil is still going strong. My current bottle that I'm vaping is called Melon Drop, with 24 milligrams of nicotine. However, the tank for it just cracked, and I was looking for some recommendations for a replacement that can fit in a ~$20 budget.
I've been vaping for a few months now, switching over from cigarettes. (I was smoking for 2 years prior to switching, so I'm nicotine dependent.) I got a Kangertech E-Vod, and it's worked well, the original coil is still going strong. My current bottle that I'm vaping is called Melon Drop, with 24 milligrams of nicotine. However, the tank for it just cracked, and I was looking for some recommendations for a replacement that can fit in a ~$20 budget.
For something like a e-vod I would go with a protank mini2, or mini3.
Thanks. And then something like a Vision Spinner for a battery?I've been vaping for a few months now, switching over from cigarettes. (I was smoking for 2 years prior to switching, so I'm nicotine dependent.) I got a Kangertech E-Vod, and it's worked well, the original coil is still going strong. My current bottle that I'm vaping is called Melon Drop, with 24 milligrams of nicotine. However, the tank for it just cracked, and I was looking for some recommendations for a replacement that can fit in a ~$20 budget.For something like a e-vod I would go with a protank mini2, or mini3.
Thanks. And then something like a Vision Spinner for a battery?I've been vaping for a few months now, switching over from cigarettes. (I was smoking for 2 years prior to switching, so I'm nicotine dependent.) I got a Kangertech E-Vod, and it's worked well, the original coil is still going strong. My current bottle that I'm vaping is called Melon Drop, with 24 milligrams of nicotine. However, the tank for it just cracked, and I was looking for some recommendations for a replacement that can fit in a ~$20 budget.For something like a e-vod I would go with a protank mini2, or mini3.
You can, but protank minis will work with your e-vod battery.
Are there any serious concerns or health risks in vaping? Google has some listed but I'm curious if any of you guys are actually worried about anything. I also read up on the news that some vapes actually explode which is kind of scary but perhaps that is only if you get the cheap kind (Same as cheap keyboards dying or crappy switches failing early)?
Just found this thread and digging in for some reading. I am looking to quit smoking and really need to find an alternative . I have some friends that use these for a couple of different applications but I figure I would read up before dropping some money on one as they can get expensive. I have tried gum,patches, medication and even bought one of those cheap ass blu e cigs but never really used it...... Any recommendations would be helpful
hells ya meow I will check those out ! Thanks for coming through for me 8) also my SSK is now one of my favorite boards thanks for your help with that 8)Just found this thread and digging in for some reading. I am looking to quit smoking and really need to find an alternative . I have some friends that use these for a couple of different applications but I figure I would read up before dropping some money on one as they can get expensive. I have tried gum,patches, medication and even bought one of those cheap ass blu e cigs but never really used it...... Any recommendations would be helpful
Vaping has been the only method that has helped me quit smoking as well. My mother also used vaping to quit smoking, and hasn't smoked a cigarette in two years now. She just recently switched to 0mg liquid too.
I can recommend the Kanger Subtank Mini and the iTaste MVP 3 as a really nice combo. Or if you want something cheaper and smaller, I really liked my Aspire Nautilus Mini. Not sure on a battery to recommend for the Nautilus, I had a Joyetech E-go, and it was so-so with that tank. Not quite enough power as I would have liked.
The MVP 3 has been a great battery for me, the charge lasts forever and it gives the Subtank the power it needs. It also comes in handy for charging my phone and things via USB.
The Subtank Mini.. is just amazing. Great, reliable tank that's easy to take apart. Great flavour and vapour production! Also the rebuildable coil base is pretty neat too.
Good luck quitting Sed8! Vaping has been one of the best investments I've made in recent memory, I really enjoy it.. and it's so much easier on the wallet than cigarettes (which means more keyboards! :)) ), not to mention that I feel way healthier.
hells ya meow I will check those out ! Thanks for coming through for me 8) also my SSK is now one of my favorite boards thanks for your help with that 8)Just found this thread and digging in for some reading. I am looking to quit smoking and really need to find an alternative . I have some friends that use these for a couple of different applications but I figure I would read up before dropping some money on one as they can get expensive. I have tried gum,patches, medication and even bought one of those cheap ass blu e cigs but never really used it...... Any recommendations would be helpful
Vaping has been the only method that has helped me quit smoking as well. My mother also used vaping to quit smoking, and hasn't smoked a cigarette in two years now. She just recently switched to 0mg liquid too.
I can recommend the Kanger Subtank Mini and the iTaste MVP 3 as a really nice combo. Or if you want something cheaper and smaller, I really liked my Aspire Nautilus Mini. Not sure on a battery to recommend for the Nautilus, I had a Joyetech E-go, and it was so-so with that tank. Not quite enough power as I would have liked.
The MVP 3 has been a great battery for me, the charge lasts forever and it gives the Subtank the power it needs. It also comes in handy for charging my phone and things via USB.
The Subtank Mini.. is just amazing. Great, reliable tank that's easy to take apart. Great flavour and vapour production! Also the rebuildable coil base is pretty neat too.
Good luck quitting Sed8! Vaping has been one of the best investments I've made in recent memory, I really enjoy it.. and it's so much easier on the wallet than cigarettes (which means more keyboards! :)) ), not to mention that I feel way healthier.
Thanks to BunnyLake i finally got decent set up running 😀Does bunny have his own Wax seal ?! How freaking cool is that :eek:Show Image(http://i.imgur.com/qbNh02r.jpg)
Already ordered a tuglyfe tube RDA kit to start wrapping my own coils
Addicted
Thanks to BunnyLake i finally got decent set up running 😀Does bunny have his own Wax seal ?! How freaking cool is that :eek:Show Image(http://i.imgur.com/qbNh02r.jpg)
Already ordered a tuglyfe tube RDA kit to start wrapping my own coils
Addicted
hells ya meow I will check those out ! Thanks for coming through for me 8) also my SSK is now one of my favorite boards thanks for your help with that 8)Just found this thread and digging in for some reading. I am looking to quit smoking and really need to find an alternative . I have some friends that use these for a couple of different applications but I figure I would read up before dropping some money on one as they can get expensive. I have tried gum,patches, medication and even bought one of those cheap ass blu e cigs but never really used it...... Any recommendations would be helpful
Vaping has been the only method that has helped me quit smoking as well. My mother also used vaping to quit smoking, and hasn't smoked a cigarette in two years now. She just recently switched to 0mg liquid too.
I can recommend the Kanger Subtank Mini and the iTaste MVP 3 as a really nice combo. Or if you want something cheaper and smaller, I really liked my Aspire Nautilus Mini. Not sure on a battery to recommend for the Nautilus, I had a Joyetech E-go, and it was so-so with that tank. Not quite enough power as I would have liked.
The MVP 3 has been a great battery for me, the charge lasts forever and it gives the Subtank the power it needs. It also comes in handy for charging my phone and things via USB.
The Subtank Mini.. is just amazing. Great, reliable tank that's easy to take apart. Great flavour and vapour production! Also the rebuildable coil base is pretty neat too.
Good luck quitting Sed8! Vaping has been one of the best investments I've made in recent memory, I really enjoy it.. and it's so much easier on the wallet than cigarettes (which means more keyboards! :)) ), not to mention that I feel way healthier.
How's the tugboat with that subtank?
I've got a new ipv3 li for temp control that I'm really liking and I think the battery in my istick is dying so I'm debating shopping for a new internal battery mod.hells ya meow I will check those out ! Thanks for coming through for me 8) also my SSK is now one of my favorite boards thanks for your help with that 8)Just found this thread and digging in for some reading. I am looking to quit smoking and really need to find an alternative . I have some friends that use these for a couple of different applications but I figure I would read up before dropping some money on one as they can get expensive. I have tried gum,patches, medication and even bought one of those cheap ass blu e cigs but never really used it...... Any recommendations would be helpful
Vaping has been the only method that has helped me quit smoking as well. My mother also used vaping to quit smoking, and hasn't smoked a cigarette in two years now. She just recently switched to 0mg liquid too.
I can recommend the Kanger Subtank Mini and the iTaste MVP 3 as a really nice combo. Or if you want something cheaper and smaller, I really liked my Aspire Nautilus Mini. Not sure on a battery to recommend for the Nautilus, I had a Joyetech E-go, and it was so-so with that tank. Not quite enough power as I would have liked.
The MVP 3 has been a great battery for me, the charge lasts forever and it gives the Subtank the power it needs. It also comes in handy for charging my phone and things via USB.
The Subtank Mini.. is just amazing. Great, reliable tank that's easy to take apart. Great flavour and vapour production! Also the rebuildable coil base is pretty neat too.
Good luck quitting Sed8! Vaping has been one of the best investments I've made in recent memory, I really enjoy it.. and it's so much easier on the wallet than cigarettes (which means more keyboards! :)) ), not to mention that I feel way healthier.
If you want a box full of old style/gen tanks (kanger aerotanks/aspire nautilus) and mods (mvp v2/vtr), I have my old set up just sitting around doing nothing. It'll need coils and juice, but I'll even throw an 18650 in for the vtr. Let me know and I'll at least loan it to you until you know if vaping is for you.
Just found this thread and digging in for some reading. I am looking to quit smoking and really need to find an alternative . I have some friends that use these for a couple of different applications but I figure I would read up before dropping some money on one as they can get expensive. I have tried gum,patches, medication and even bought one of those cheap ass blu e cigs but never really used it...... Any recommendations would be helpful
Wow thanks TJ, Punks and Invader 8) there's a hell of a lot more to this then I first thought.
Post above made me look into the ijust (there's a 2 now that doesn't use removable batteries now)EDIT: nvm i prefer regulated mods and found a temp control version of my istick that just came out.
I thought I was set up with my istick 30w and ipv3 li...
Oh and I'm probably going to try a delta 2 with ti coil this weekend if one of my local shops has them in stock.
Post above made me look into the ijust (there's a 2 now that doesn't use removable batteries now)EDIT: nvm i prefer regulated mods and found a temp control version of my istick that just came out.
I thought I was set up with my istick 30w and ipv3 li...
Oh and I'm probably going to try a delta 2 with ti coil this weekend if one of my local shops has them in stock.
The iJust IS a regulated mod. Here's where I got mine:
http://www.eciggity.com/ismoka-eleaf-ijust-kit/ (http://www.eciggity.com/ismoka-eleaf-ijust-kit/)
But the tank it comes with is absolute ****
Post above made me look into the ijust (there's a 2 now that doesn't use removable batteries now)EDIT: nvm i prefer regulated mods and found a temp control version of my istick that just came out.
I thought I was set up with my istick 30w and ipv3 li...
Oh and I'm probably going to try a delta 2 with ti coil this weekend if one of my local shops has them in stock.
The iJust IS a regulated mod. Here's where I got mine:
http://www.eciggity.com/ismoka-eleaf-ijust-kit/ (http://www.eciggity.com/ismoka-eleaf-ijust-kit/)
But the tank it comes with is absolute ****
Yeah, I saw that, I'd meant that the 2 wasn't regulated anymore. They just threw a huge battery in it.
Post above made me look into the ijust (there's a 2 now that doesn't use removable batteries now)EDIT: nvm i prefer regulated mods and found a temp control version of my istick that just came out.
I thought I was set up with my istick 30w and ipv3 li...
Oh and I'm probably going to try a delta 2 with ti coil this weekend if one of my local shops has them in stock.
The iJust IS a regulated mod. Here's where I got mine:
http://www.eciggity.com/ismoka-eleaf-ijust-kit/ (http://www.eciggity.com/ismoka-eleaf-ijust-kit/)
But the tank it comes with is absolute ****
Yeah, I saw that, I'd meant that the 2 wasn't regulated anymore. They just threw a huge battery in it.
Ahh. I gotcha. Didn't realized the new one was like that. I've been using unregulated mods for a while now and love it.
Built my own box mod recently. Variable voltage with dual 18650s, regulated with a Raptor 10A chip and it has reverse polarity protection with resettable 10A fuses. All of the smaller electronics are mounted on a small PCB ( https://oshpark.com/profiles/Iron_Lung_Electronic_Design ). Rest of the components I sourced from Mouser (except of the digital voltage meter and magnets - got those from Amazon). Used a Fat Daddy V4 510 connector and I am running a Subtank Mini currently.
Mouser Parts List - Box
611-1203M1S3ZQE2 | 1
652-3352T-1-201LF | 1
612-PV5S64011 | 1
534-1049 | 1
576-16R500GU | 2
781-SUP75P03-07-E3 | 1
894-NQR010A0X4Z | 1
546-1590B-BK | 1
Mouser Parts List - SMD components
810-C2012X5R1C226M | 1
71-CRCW0603-220-E3 | 1
71-CRCW0603-5.1K-E3 | 1
810-C1608X5R1A106M | 1
(I actually have spare boards and SMD parts for them)
Wiring DiagramShow Image(https://s-media-cache-ak0.pinimg.com/236x/be/e1/25/bee12575290a9c290d8db3e5402b8599.jpg)
Work in progressShow Image(http://s22.postimg.org/ragk1yvqp/image.jpg)Show Image(http://s9.postimg.org/ksven9clr/image.jpg)Show Image(http://s29.postimg.org/9iic55wd3/image.jpg)Show Image(http://s18.postimg.org/hgsgsciy1/image.jpg)
Completed BuildShow Image(http://s10.postimg.org/fe7wie889/image.jpg)Show Image(http://s4.postimg.org/czwhdcp59/image.jpg)Show Image(http://s17.postimg.org/wkrjmota7/image.jpg)Show Image(http://s10.postimg.org/jr6g0tgyx/image.jpg)Show Image(http://s11.postimg.org/d2xy8e60z/image.jpg)
I don't smoke myself, but could you guys maybe give me some recommendations? I'd like to give my father an alternative from smoking.
Could you guys recommend something that an older guy could use with ease and that a pack a day smoker would enjoy? Money is not a big issue, but I'd prefer it to be reasonable considering this is just an experiment.
I'm not really sure about everything you even need to start vaping either, so I might need a quick link/summary of that to understand.
Is it as good as a cigarette, to you guys that used to smoke a lot? Are any health claims true?
Okay...
I'm a major germaphobe. Explain to me how to clean these things, how often you need to, and how you keep fungi, bacteria, etc from growing inside.
Okay...
I'm a major germaphobe. Explain to me how to clean these things, how often you need to, and how you keep fungi, bacteria, etc from growing inside.
Didn't know it got that hot. Scalding hot tap water is technically dirty, though. :p
I'd probably alcohol all the parts I could on a daily basis.
Show Image(http://s21.postimg.org/dlougnmd3/image.jpg)
22g parallel coil hitting great.
It's been almost 2 months without a cig and I haven't had a single urge since starting to vape. The future is glorious.
Best part is not having to leave my PC every 30mins
wow, if that's 22g wire, that is a huge atomizer! congrats on your two months!
it is true that you don't have to leave your comp now every 30 mins, but will you be able to see the screen through the epic clouds? :D
Show Image(http://s21.postimg.org/dlougnmd3/image.jpg)
22g parallel coil hitting great.
It's been almost 2 months without a cig and I haven't had a single urge since starting to vape. The future is glorious.
Best part is not having to leave my PC every 30mins
Very nice looking coils! Dual 6 it looks like... What's your ohms? ~0.15?
mvp 2 and vv3 been untouched for a while ;( protank minis all crapped out on me, real and fake. too poor to spend the money on it
wow, if that's 22g wire, that is a huge atomizer! congrats on your two months!
it is true that you don't have to leave your comp now every 30 mins, but will you be able to see the screen through the epic clouds? :D
i lied! its actually 26g kanthal, i used the 22g in my other RDA got confused :-\, and thanks for the congrats.
haha its worth it! the clouds are funShow Image(http://s21.postimg.org/dlougnmd3/image.jpg)
22g parallel coil hitting great.
It's been almost 2 months without a cig and I haven't had a single urge since starting to vape. The future is glorious.
Best part is not having to leave my PC every 30mins
Very nice looking coils! Dual 6 it looks like... What's your ohms? ~0.15?
its actually 26g @ .34 ohms I havent found a build around .15 i liked yet to enjoy it. I made a twisted 26g that got down to .16 however the vape had no flavor but chucked HUGE clouds. Still tinkering every day with coil builds. Favorites are single parallels in the Tugboat RDA and Dual Dragons in the Dark Horse :blank:
Show Image(http://s21.postimg.org/dlougnmd3/image.jpg)
22g parallel coil hitting great.
It's been almost 2 months without a cig and I haven't had a single urge since starting to vape. The future is glorious.
Best part is not having to leave my PC every 30mins
Very nice looking coils! Dual 6 it looks like... What's your ohms? ~0.15?
Enjoying the freedom of not having to stop whatever it is I'm doing to go outside and smoke a cigarette. Wether I'm on my couch or at my pc I'm really enjoying the switch. :thumb: I do get a craving every once in awhile but It passes quickly. It's been about 2 weeks and this is the longest I've been smoke free in 12 years !!!!
Do I spy some clapton wire in there?
How do you like it
Do I spy some clapton wire in there?
How do you like it
Do I spy some clapton wire in there?
How do you like it
I wrapped my first clapton the other day, fairly simple but it's a pain in the ass. I typically use a single coil btw. The vapor production was crazy and the coil holds heat for a while so there's less of a vapor production delay. Also pretty dense fairly warm vapor and real solid flavor.
Also I bought a teal 454 Big Block the other day.
Mine was larger though, 26 around 22. Just so you know.Do I spy some clapton wire in there?
How do you like it
I wrapped my first clapton the other day, fairly simple but it's a pain in the ass. I typically use a single coil btw. The vapor production was crazy and the coil holds heat for a while so there's less of a vapor production delay. Also pretty dense fairly warm vapor and real solid flavor.
Also I bought a teal 454 Big Block the other day.
I'll cut one off and see if I like it better. Nice pick up! Have a Subohm mutation v4 in the mail my last atty I'll buy... Excited to play with 4 posts
Alright guys, I now have an eleaf istick 30w with the Melo tank. Works great and can actually taste what the flavors are supposed to be. My question is this.
As far as online stores, who is the "Jelly Belly" of juice?
Edit: Just want to point out, I am not looking for stupid sweet, but I do prefer fruit flavors. I just want accurate flavors. Well within reason.
I'll probably buy some of that. I also really like king of clouds juices which I get for a pretty good price back home because I know the vape shop guys. Lunar harvest black 6mg is my juice of choice right now.Alright guys, I now have an eleaf istick 30w with the Melo tank. Works great and can actually taste what the flavors are supposed to be. My question is this.
As far as online stores, who is the "Jelly Belly" of juice?
Edit: Just want to point out, I am not looking for stupid sweet, but I do prefer fruit flavors. I just want accurate flavors. Well within reason.
https://www.wittyoctopusvapors.com/product/octopus-ink/
Im a custard man, but this is a great dark currant and blackberry w/ a great price tag
Do I spy some clapton wire in there?
How do you like it
I wrapped my first clapton the other day, fairly simple but it's a pain in the ass. I typically use a single coil btw. The vapor production was crazy and the coil holds heat for a while so there's less of a vapor production delay. Also pretty dense fairly warm vapor and real solid flavor.
Also I bought a teal 454 Big Block the other day.
I'll cut one off and see if I like it better. Nice pick up! Have a Subohm mutation v4 in the mail my last atty I'll buy... Excited to play with 4 posts
It leaks like crazy and I had to use my modified to piece to fit it.Do I spy some clapton wire in there?
How do you like it
I wrapped my first clapton the other day, fairly simple but it's a pain in the ass. I typically use a single coil btw. The vapor production was crazy and the coil holds heat for a while so there's less of a vapor production delay. Also pretty dense fairly warm vapor and real solid flavor.
Also I bought a teal 454 Big Block the other day.
I'll cut one off and see if I like it better. Nice pick up! Have a Subohm mutation v4 in the mail my last atty I'll buy... Excited to play with 4 posts
I'm about to buy a spool of premade clapton to try. Price is good so why not.
My only issue with the mutation is the coils sit right over the bottom air flow so it leaks super easy.
Hopefully, pic soon of the build I'm about to start.
Simple build is simple -Show Image(https://farm6.staticflickr.com/5685/21045292536_61c9a17aea_k.jpg)
22ga 5wraps
Simple build is simple -Show Image(https://farm6.staticflickr.com/5685/21045292536_61c9a17aea_k.jpg)
22ga 5wraps
Digging the wells on that atty, using the tugboat and dark horse currently and my wicks tend to flair out and trap liquid. Part of the reason why the mutation caught my eye. Nice set up man, bunnylake got me using 22 for dual wraps and I love it.
really stupid names for their stuff
while waiting on keyboard stuff in the mail, my current setups :thumb:Show Image(http://i.imgur.com/2rIVjLR.jpg)Show Image(http://i.imgur.com/vFTSo8A.jpg)Show Image(http://i.imgur.com/GBqToTg.jpg)Show Image(http://i.imgur.com/m2GfIwg.jpg)
while waiting on keyboard stuff in the mail, my current setups :thumb:Show Image(http://i.imgur.com/2rIVjLR.jpg)Show Image(http://i.imgur.com/vFTSo8A.jpg)Show Image(http://i.imgur.com/GBqToTg.jpg)Show Image(http://i.imgur.com/m2GfIwg.jpg)
Damn those look dope! What flavor juices?
SB mothers milk is my favorite but I can't afford to vape $25 30ml bottles haha
SB mothers milk is my favorite but I can't afford to vape $25 30ml bottles haha
I'll buy you bottles for Vandals, you can vape your face off son.
SB mothers milk is my favorite but I can't afford to vape $25 30ml bottles haha
I'll buy you bottles for Vandals, you can vape your face off son.
Off topic many apologizes, but I fixed the bottom of the vandals to have the squared bottoms of the KWK blanks. Also there will be no more package art, each package will contain a priority mail sticker with art on it so the pesky USPS guys will stop putting stickers over it. Plus you can stick it anywhere and don't have to keep the bubble mailer :P
SB mothers milk is my favorite but I can't afford to vape $25 30ml bottles haha
I'll buy you bottles for Vandals, you can vape your face off son.
Enabler
Off topic many apologizes, but I fixed the bottom of the vandals to have the squared bottoms of the KWK blanks. Also there will be no more package art, each package will contain a priority mail sticker with art on it so the pesky USPS guys will stop putting stickers over it. Plus you can stick it anywhere and don't have to keep the bubble mailer :P
Got a subtank for my ancient MVP 2.0 today... and some 3mg honeydew :3
Hey all is there anyone here that has a good simple set up they would sell or one I could try out. I know sorme of you have multiple rigs or mods and some you don't use . I will gladly pay shipping or if someone has an oldie but goodie that they don't use anymore and would either let me try it out or sell it to me.
There's so many options and in I really don't know what to use or go for. I'm looking for something with good battery life that's portable that I can take to work. Thanks for your time all :thumb:
Hey all is there anyone here that has a good simple set up they would sell or one I could try out. I know sorme of you have multiple rigs or mods and some you don't use . I will gladly pay shipping or if someone has an oldie but goodie that they don't use anymore and would either let me try it out or sell it to me.
There's so many options and in I really don't know what to use or go for. I'm looking for something with good battery life that's portable that I can take to work. Thanks for your time all :thumb:
Check out your local vape shops and stuff, but a good kit that you can start out with to try and grow into is the evic mini. You'll need to buy an 18650 battery for it, but you can also get it in tiffany blue and it comes with a tank and coils, so all you'd need besides is a bottle of juice.
Hey all is there anyone here that has a good simple set up they would sell or one I could try out. I know sorme of you have multiple rigs or mods and some you don't use . I will gladly pay shipping or if someone has an oldie but goodie that they don't use anymore and would either let me try it out or sell it to me.
There's so many options and in I really don't know what to use or go for. I'm looking for something with good battery life that's portable that I can take to work. Thanks for your time all :thumb:
Check out your local vape shops and stuff, but a good kit that you can start out with to try and grow into is the evic mini. You'll need to buy an 18650 battery for it, but you can also get it in tiffany blue and it comes with a tank and coils, so all you'd need besides is a bottle of juice.
That's a good place to start depending on what you want.
When I started vaping I knew I'd want to build my own coils and super sub ohm which at the time would've been hard on a regulated box so I started with a mutation v2 and a paragon midnight clone (mod that I thought looked cool). But at this point boxes basically do it all so for starting out you should just go with that.
Mother's Milk (http://b-xvapor.com/products/moms-milk) or Dad's Milk (http://b-xvapor.com/collections/frontpage/products/dads-milk?variant=1015211333), $11 for 30Ml or $40 for 120Ml :thumb:while waiting on keyboard stuff in the mail, my current setups :thumb:Show Image(http://i.imgur.com/2rIVjLR.jpg)Show Image(http://i.imgur.com/vFTSo8A.jpg)Show Image(http://i.imgur.com/GBqToTg.jpg)Show Image(http://i.imgur.com/m2GfIwg.jpg)
Damn those look dope! What flavor juices?
Perticular to milky/creamy/baked goods. Candies and sweets bother my throat. One hit wonders muffin man/rocket man/milk man are my EDV's. SB mothers milk is my favorite but I can't afford to vape $25 30ml bottles haha
I've been free of cigs for two years now but my roomie got me into vaping and I'm really enjoying the (mostly) guilt-free clouds - so tasty! eVic VT w/Thump Atty & 2puffs derlin drip tip + B-X Vapor sauce (frigging love Melonlyptus). Current setup is just a plain 2 coil build @ 0.26Ω, 40-55W depending on sauce but I'm really eyeballing the Cloudmaker Tech Whiteout DNA200 (https://cloudmakertech.com/shop/) for an upgrade when that comes out. BTW if anyone hasn't yet heard of the Scottish Roll (https://www.youtube.com/watch?v=Yf-V0H4DnFo) method of wicking, I highly recommend it! PunksDead, I saw you on /r/electronic_cigarette and realized I needed to find the Geekhack vape thread :))Show Image(http://i.imgur.com/YzO1vC5.jpg)
Anyone know any interesting vertical coils? I feel like rebuilding my 454 today.
I'll give it a shot if I have any 22ga left. If not I'll try it with twisted 26.Anyone know any interesting vertical coils? I feel like rebuilding my 454 today.Show Image(http://imgur.com/UElDziF.jpg)
Wrap 22g 6 times and bend it over from the middle .2-.18 for dual coil. Love this build PITA to wick
Show Image(http://i.imgur.com/GDiWRHX.jpg)
Got a great deal on new mod (evic vtc mini) + battery + 30ml of juice thanks to halverson's buddy.
It's so tiny and cute! Beats the **** out of my MVP2
Show Image(http://i.imgur.com/GDiWRHX.jpg)
Got a great deal on new mod (evic vtc mini) + battery + 30ml of juice thanks to halverson's buddy.
It's so tiny and cute! Beats the **** out of my MVP2
i love those, got to play with one at my local B&M. nice pick up man. I personally think they are sexier then the competing subox's. plus the extra 10w :D
How are you guys liking temp controlled mods vs standard VV and VW?
How are you guys liking temp controlled mods vs standard VV and VW?
I wasn't blown away with 28g nickel builds. I don't like that I can't dry fire and test the coils prior to wicking. I'll revisit when I get some 24g and 26g.
Nichrome 80 is the way to go IMO, just built some 24g kanthal 32g nichrome 80 claptons... And it's nice, the nichrome heats up quickly and it's a nice warm vape.
Show Image(http://i.imgur.com/1oG91R6.jpg)
hey dudes,
ill be doing a small run of rewrapped sony VTC5's and Samsung 25R's in a KWK mummy design.
Im gonna do 10 of each battery. PM me if interested
cheers!
For sure going to buy some. They'll go in whatever box I buy.Show Image(http://i.imgur.com/1oG91R6.jpg)
hey dudes,
ill be doing a small run of rewrapped sony VTC5's and Samsung 25R's in a KWK mummy design.
Im gonna do 10 of each battery. PM me if interested
cheers!
omfg I just bought a pack of 4 25r's today and pd you know my fandom reaches stupid heights when it comes to your work where can I sign IN BLOODShow Image(http://i.imgur.com/1oG91R6.jpg)
hey dudes,
ill be doing a small run of rewrapped sony VTC5's and Samsung 25R's in a KWK mummy design.
Im gonna do 10 of each battery. PM me if interested
cheers!
So I'm still a bit of a newb when it comes to vaping but I've identified some juices that I like and have a set up that works pretty well for me. I haven't gotten into the rda's really yet. I started with an ego one. Then my buddy sent me a subox mini right after I purchSed a evic mini (ughh I know joyetech much 8(...) I use the ego for when I'm at work and the evic mini when im at home. I have been using .05 atomizer prefurbs as I stated before I haven't started tinkering too much but I'm really enjoying it. I see pd and a few other people here use a sieg 150w which might be my next purchase but on to the juice !!
So I have identified I like sweet tobacco flavors for all day use and dig creamier juices after work as kind of a treat. I have been using Revolutions broadway as my all day vape and really like it. Its a tobacco flavored 8mg nic 70\30 blend I think and is a caramel vanilla tobacco very smooth however I have been trying to find other tobacco flavors and wondering what other people use.
For my after work juice I had been using unicorn milk from cuttwpod I think but I was recommended milkman and another one mothers milk however they are a bit pricy.
I'm trying to find some good juices in some giant econo bottled like mount baker does (260ml or something crazy like that)but my first experience with them hasn't been a great one. My first shipment is almost 10 days late.
Does anyone have any other companies or brand's they like that sell in bulk ?
Sorry for the wall of text and thanks for all the support :thumb:
Show Image(http://i.imgur.com/1oG91R6.jpg)
hey dudes,
ill be doing a small run of rewrapped sony VTC5's and Samsung 25R's in a KWK mummy design.
Im gonna do 10 of each battery. PM me if interested
cheers!
Does anyone have any other companies or brand's they like that sell in bulk ?
If I still vaped I would totally jump on this, that's just awesome punk! :thumb:Show Image(http://i.imgur.com/1oG91R6.jpg)
hey dudes,
ill be doing a small run of rewrapped sony VTC5's and Samsung 25R's in a KWK mummy design.
Im gonna do 10 of each battery. PM me if interested
cheers!
ahhh thanks sent always looking out :thumb:Show Image(http://i.imgur.com/1oG91R6.jpg)
hey dudes,
ill be doing a small run of rewrapped sony VTC5's and Samsung 25R's in a KWK mummy design.
Im gonna do 10 of each battery. PM me if interested
cheers!
I stopped vaping but I want this so bad. Damn it, Punks. @___@Does anyone have any other companies or brand's they like that sell in bulk ?
I can't help you in regards to selling in bulk but here are two juices that Bunny and I both dig. I turned him on to one and he introduced me to the other. White E. Octupus Bavarian Cream (http://www.wittyoctopusvapors.com/product/bavarian-cream/) and Epiclouds Doughnut Pounder (http://namberjuice.com/epiclouds/doughnutpounderec.html). Dunno if you've tried either but they pretty nom nom tasty.
Look into gravity vapes, charmed vapors, infinity vapors (through uvapez.com), three dukes and moose juice.
The evic mini is a hecka nice, better than the subox in my mind. I wouldn't worry too much about RBAs and **** either. The slightly better experience isn't worth the hassle in my mind.
Anyone know any interesting vertical coils? I feel like rebuilding my 454 today.Show Image(http://imgur.com/UElDziF.jpg)
Wrap 22g 6 times and bend it over from the middle .2-.18 for dual coil. Love this build PITA to wick
those wicking holes look huge :pShow Image(http://i.imgur.com/bzIrhd4.jpg)Show Image(http://i.imgur.com/zfrOj1A.jpg)
picked up some of the new OOC Atom Vapes Kanger replacement coils for the Subtank,
highly recommend for lazy days! i was a bit bugged the clapton isnt on the entire wire :( but its nice actually getting a warm vape out of the Subtank without frying my wick. :thumb:
those wicking holes look huge :pShow Image(http://i.imgur.com/bzIrhd4.jpg)Show Image(http://i.imgur.com/zfrOj1A.jpg)
picked up some of the new OOC Atom Vapes Kanger replacement coils for the Subtank,
highly recommend for lazy days! i was a bit bugged the clapton isnt on the entire wire :( but its nice actually getting a warm vape out of the Subtank without frying my wick. :thumb:
Just ordered a uwell crown.... It has an RBA add on in case I want to get into that so I'm pretty damn excited for it to get here. Can someone explain to me the benefit of wrapping your own coils. From what I can tell its cheaper and you can customize it with materials you prefer and adjust your build to produce more vapor or flavor. For example the pre fabbed joyetech .5 ohm coils feel like they only last about a week of steady vaping before flavor and everything else goes to ****. I have been reading the prefabbed ones in the crown can last up to a month :eek: however they are stainless steel and that sounds well for lack of better words unhealthy.Coil Master V3. (http://www.amazon.com/Coil-Master-Black-Authenticity-Scratch/dp/B00YTB0KK6) They're like $22 and it makes wrapping your own coils stupid simple and you will save so much money vs buying prebuilt. and you can wick your own organic cotton (http://www.amazon.com/dp/B00AF3L5E2) instead of using whatever that rayon blend stuff in the pre-builts is. Jigs range from 1.5mm to 4mm so you can makes coils to fit whatever.
There is so much to learn and experiment with its a little mind boggling even a couple weeks into it now. I am probably going to have to upgrade my build now as the evic mini sounds like it might struggle with the crown depending on which coils i use.
Sorry I am a bit scattered but like I said still learning and haven't been so excited about a hobby since well keyboards :))
Just ordered a uwell crown.... It has an RBA add on in case I want to get into that so I'm pretty damn excited for it to get here. Can someone explain to me the benefit of wrapping your own coils. From what I can tell its cheaper and you can customize it with materials you prefer and adjust your build to produce more vapor or flavor. For example the pre fabbed joyetech .5 ohm coils feel like they only last about a week of steady vaping before flavor and everything else goes to ****. I have been reading the prefabbed ones in the crown can last up to a month :eek: however they are stainless steel and that sounds well for lack of better words unhealthy.Coil Master V3. (http://www.amazon.com/Coil-Master-Black-Authenticity-Scratch/dp/B00YTB0KK6) They're like $22 and it makes wrapping your own coils stupid simple and you will save so much money vs buying prebuilt. and you can wick your own organic cotton (http://www.amazon.com/dp/B00AF3L5E2) instead of using whatever that rayon blend stuff in the pre-builts is. Jigs range from 1.5mm to 4mm so you can makes coils to fit whatever.
There is so much to learn and experiment with its a little mind boggling even a couple weeks into it now. I am probably going to have to upgrade my build now as the evic mini sounds like it might struggle with the crown depending on which coils i use.
Sorry I am a bit scattered but like I said still learning and haven't been so excited about a hobby since well keyboards :))
I use an eVic VT (60W) (http://www.joyetech.com/product/evic-vt/) and it handles my RDAs just fine. I just recently got one of those Velocity clones from Slowttech and I'm loving it - although it goes through eJuice like mad, so I gotta make sure I put it down once in a while (blew through a 30Ml bottle in 3 days, good grief). Pro-tip on the Velocity, spend extra, get the 1:1 clone by Tobecco; phillips head screws suck at staying put.
So the uwell should work well with the evic ? Thats good to hear I'm a bit short on funds so I can't afford to really make any mistakes in my vaping fund. Its not uncommon for me to rip 2/3 to 1 15ml bottle on days off from work haha
So the uwell should work well with the evic ? Thats good to hear I'm a bit short on funds so I can't afford to really make any mistakes in my vaping fund. Its not uncommon for me to rip 2/3 to 1 15ml bottle on days off from work haha
It should work just fine. I run around 100w on mine, but I like a extremely warm/hot vape compared to most.
1. Should I get a dna200 mod?
2. Which one?
http://www.myvaporstore.com/HCigar-VT200-Evolv-DNA-200-Box-Mod-p/hcvt2020.htm
http://www.militiamods.com/store/p38/Militia_Mods_DNA200.html
1. Should I get a dna200 mod?
2. Which one?
http://www.myvaporstore.com/HCigar-VT200-Evolv-DNA-200-Box-Mod-p/hcvt2020.htm
http://www.militiamods.com/store/p38/Militia_Mods_DNA200.html
http://flawlessvapeshop.com/200watt-tuglyfe-box-mod/
So i just discovered this thread after talking with hoz about vaping. I was a long time smoker who has tried to stop cold turkey, but even months later i still get massive craving and what i can only describe as withdrawal headaches. So i thought instead of going back to cigarettes, i would give vaping a try. My biggest problem, im not sure where to start, or even honestly how it works.I started with a joytech ego one which is a own style (tube shaped) and even though it has a sub ohm battery (powerful ) I regretted it. I now use my evic mini and the subox mini mostly. I recommend going to one of the vaping websites and reading up on beginning vaping it really helped me as well as some members here. Between the juices and different kits tanks boxes and mods it can be overwhelming I can't express how glad I was that i took the time to read up and ask for advice
I looked through a bit of this thread, and tried to understand what i need and the headed over to a website i found called myvaporstore.com and found an MVP 3.0 and a Subtank Mini. Would this be a good starting set up and is there anything else i may be missing? What about juice, where do you recommended buying from and what would be some good ones for a beginner?
So i just discovered this thread after talking with hoz about vaping. I was a long time smoker who has tried to stop cold turkey, but even months later i still get massive craving and what i can only describe as withdrawal headaches. So i thought instead of going back to cigarettes, i would give vaping a try. My biggest problem, im not sure where to start, or even honestly how it works.I started with a joytech ego one which is a own style (tube shaped) and even though it has a sub ohm battery (powerful ) I regretted it. I now use my evic mini and the subox mini mostly. I recommend going to one of the vaping websites and reading up on beginning vaping it really helped me as well as some members here. Between the juices and different kits tanks boxes and mods it can be overwhelming I can't express how glad I was that i took the time to read up and ask for advice
I looked through a bit of this thread, and tried to understand what i need and the headed over to a website i found called myvaporstore.com and found an MVP 3.0 and a Subtank Mini. Would this be a good starting set up and is there anything else i may be missing? What about juice, where do you recommended buying from and what would be some good ones for a beginner?
So i just discovered this thread after talking with hoz about vaping. I was a long time smoker who has tried to stop cold turkey, but even months later i still get massive craving and what i can only describe as withdrawal headaches. So i thought instead of going back to cigarettes, i would give vaping a try. My biggest problem, im not sure where to start, or even honestly how it works.I started with a joytech ego one which is a own style (tube shaped) and even though it has a sub ohm battery (powerful ) I regretted it. I now use my evic mini and the subox mini mostly. I recommend going to one of the vaping websites and reading up on beginning vaping it really helped me as well as some members here. Between the juices and different kits tanks boxes and mods it can be overwhelming I can't express how glad I was that i took the time to read up and ask for advice
I looked through a bit of this thread, and tried to understand what i need and the headed over to a website i found called myvaporstore.com and found an MVP 3.0 and a Subtank Mini. Would this be a good starting set up and is there anything else i may be missing? What about juice, where do you recommended buying from and what would be some good ones for a beginner?
Well Sed, i took your advice and spent a good amount of time watching videos and reading some stuff. So deicded to jump in and i got the Joyetech evic starter pack, a subox mini and a few different juices and im going to give it all a try.
So i just discovered this thread after talking with hoz about vaping. I was a long time smoker who has tried to stop cold turkey, but even months later i still get massive craving and what i can only describe as withdrawal headaches. So i thought instead of going back to cigarettes, i would give vaping a try. My biggest problem, im not sure where to start, or even honestly how it works.I started with a joytech ego one which is a own style (tube shaped) and even though it has a sub ohm battery (powerful ) I regretted it. I now use my evic mini and the subox mini mostly. I recommend going to one of the vaping websites and reading up on beginning vaping it really helped me as well as some members here. Between the juices and different kits tanks boxes and mods it can be overwhelming I can't express how glad I was that i took the time to read up and ask for advice
I looked through a bit of this thread, and tried to understand what i need and the headed over to a website i found called myvaporstore.com and found an MVP 3.0 and a Subtank Mini. Would this be a good starting set up and is there anything else i may be missing? What about juice, where do you recommended buying from and what would be some good ones for a beginner?
Well Sed, i took your advice and spent a good amount of time watching videos and reading some stuff. So deicded to jump in and i got the Joyetech evic starter pack, a subox mini and a few different juices and im going to give it all a try.
Good plan
A nice member here sent me some homemade juice for free and decided to surprise me by throwing in a free RDA! I'll talk about the juice after I've had some time to vape it. Not sure what the RDA is but it has a pretty huge build platform that looks like it'll fit a larger clapton. I'll hopefully have time to build it later this week.
(Attachment Link)
I was looking at the tug rda's and mods and they look sick they even have cerakote lol they are a bit pricy but they look AMAZING especially with your kult battery skins :eek: need to get me some of that kwk swagger ;)Show Image(http://i.imgur.com/CrNhtsB.jpg)
https://geekhack.org/index.php?topic=68205.msg1616575#msg1616575
i figure it might be a bit more advanced then a beginner would normally go. But as with keyboards, I'm not one to start off small and work my way up.
dude I just started my evic in power mode where you adjust wattage and I 💘 it haven't even craved a cig vaping 6-8mg juice anything stronger tastes a lol peppery to me but the 12mg wasnt too bad....congrats tree no more headaches and stinky clothes 8)So i just discovered this thread after talking with hoz about vaping. I was a long time smoker who has tried to stop cold turkey, but even months later i still get massive craving and what i can only describe as withdrawal headaches. So i thought instead of going back to cigarettes, i would give vaping a try. My biggest problem, im not sure where to start, or even honestly how it works.I started with a joytech ego one which is a own style (tube shaped) and even though it has a sub ohm battery (powerful ) I regretted it. I now use my evic mini and the subox mini mostly. I recommend going to one of the vaping websites and reading up on beginning vaping it really helped me as well as some members here. Between the juices and different kits tanks boxes and mods it can be overwhelming I can't express how glad I was that i took the time to read up and ask for advice
I looked through a bit of this thread, and tried to understand what i need and the headed over to a website i found called myvaporstore.com and found an MVP 3.0 and a Subtank Mini. Would this be a good starting set up and is there anything else i may be missing? What about juice, where do you recommended buying from and what would be some good ones for a beginner?
Well Sed, i took your advice and spent a good amount of time watching videos and reading some stuff. So deicded to jump in and i got the Joyetech evic starter pack, a subox mini and a few different juices and im going to give it all a try.
Good plan
i figure it might be a bit more advanced then a beginner would normally go. But as with keyboards, I'm not one tuo start off small and work my way up.
A nice member here sent me some homemade juice for free and decided to surprise me by throwing in a free RDA! I'll talk about the juice after I've had some time to vape it. Not sure what the RDA is but it has a pretty huge build platform that looks like it'll fit a larger clapton. I'll hopefully have time to build it later this week.
(Attachment Link)
that juice looks yummy. Looks like a velocity RDA they are so hot right now
Jealous!
A nice member here sent me some homemade juice for free and decided to surprise me by throwing in a free RDA! I'll talk about the juice after I've had some time to vape it. Not sure what the RDA is but it has a pretty huge build platform that looks like it'll fit a larger clapton. I'll hopefully have time to build it later this week.
(Attachment Link)
that juice looks yummy. Looks like a velocity RDA they are so hot right now
Jealous!
so I just learned that there's melatonin infused juice out there... most ppl know I have terrible sleep problems so I might give it a shot :o
Hi all, so my eVic VT came in today and I was super eager to jump right in to try it!
So I bought the eVic VT starter kit and a Kangertech Subox mini tank, along with Cosmic Fog "Milk & Honey", Mr Good Vape "Bahama Mama" and Beard Vape Co "# 88".
So to start I loaded up the eGo ONE Mega tank, that the starter kit comes with, with the "Milk & Honey". I let it soak in for a minute or two, and then went in for my first hit/puff/rip/draw. Sweet on the inhale and creamy on the exhale, it was smooth and I was able to take a nice long draw on my first try. I used this for most of the day and it was great, the 6mg nicotine level seemed perfect, not too much that i couldn't take a few hits continually and not too little that i felt like i had to hit it 10 times just to feel satisfied.
So far i love that combo.
My weird issue comes when I got home that night. I wanted to try the Subox, so i opened it up and filled it with the "bahama mama", then screwed it on the eVic and told it that it was a new atomizer. i went to take the first puff and it was STRONG, very very thick and i immediately started coughing. It was way too thick and 'hot'? if i had to explain it. Messing around with my box i turned the power WAY down to around 15w and it seems better but still seems much harsher than the eGo set on 30w & 350F. Any tips on what i may be doing wrong?
But so far, I'm very very happy with my purchase :thumb:
Do you have the nickel coil inside the Subtank? If so, you have to lock in the resistance. With temperature control it is vital to lock in the resistance when screwing on a new atomizer (whether it be rebuildable or a new coil head for a tank) or else the resistance will jump and overshoot on temperature and wattage. If you don't have the nickel coil inside the Subtank and it is the 0.5 ohm coil, you must switch to power mode and set it to the desired wattage (ideally 25-30 watts...anymore would either give you a burn hit from the start or burn out the coil faster).
Source: Helping several customers with the same issue.
Are they nickel coils though.. if it isn't the VT auto detects and will change back to regular power mode. Otherwise I have heard of a defect in certain VT units that'll just not properly detect and kick you out of temp control mode.
edit: or maybe I'm thinking of a different device but I'm positive that the VT has an issue where it keeps switching you out of temp mode.
Are they nickel coils though.. if it isn't the VT auto detects and will change back to regular power mode. Otherwise I have heard of a defect in certain VT units that'll just not properly detect and kick you out of temp control mode.
edit: or maybe I'm thinking of a different device but I'm positive that the VT has an issue where it keeps switching you out of temp mode.
It does if you build a coil too low for temp control mode.
Considering the ni200 coils only come in .15ohm and he's talking .5, it sounds like he's trying to use kanthal in temp control which is why it's kicking into wattage mode.
I guess I don't really know. I need to spend some more time looking in to it. It doesn't specifically say it's nickel, unlike the coils that came with the MEGA which are labeled with both the ohm ratings and the material ni vs tithe popping and hissing is normal and it can get especially loud if the coil gets flooded but should gradually decline in intensity as the excess juice is used up (that's at least what i have experienced)
It came with a .5 coil installed and had an extra 1.5 and RDA coil. I had originally left the .5 in it.
Even using in wattage mode it makes a popping and hissing is that common? Perhaps I should record what I'm talking about.
I guess I don't really know. I need to spend some more time looking in to it. It doesn't specifically say it's nickel, unlike the coils that came with the MEGA which are labeled with both the ohm ratings and the material ni vs ti
It came with a .5 coil installed and had an extra 1.5 and RDA coil. I had originally left the .5 in it.
Even using in wattage mode it makes a popping and hissing is that common? Perhaps I should record what I'm talking about.
lucaslink was super generous and surprised me with a velocity RDA. So I've had it for a few days and I have to say it's my new favorite RDA, for both flavor and vapor production it kicks my 454 big block's ass! It has very adjustable air flow so you can easily change between a warm dense vape and a cooler super cloudy vape.
Right now I have a braided 26ga coil that's probably around .2 ohms
For comparison sake the 454 does go through less juice but that could be due to the braided coil. Also the velocity leaks less often but when it does leak it leaks more juice than the 454.
lucaslink was super generous and surprised me with a velocity RDA. So I've had it for a few days and I have to say it's my new favorite RDA, for both flavor and vapor production it kicks my 454 big block's ass! It has very adjustable air flow so you can easily change between a warm dense vape and a cooler super cloudy vape.
Right now I have a braided 26ga coil that's probably around .2 ohms
For comparison sake the 454 does go through less juice but that could be due to the braided coil. Also the velocity leaks less often but when it does leak it leaks more juice than the 454.
It's a great atty! I just wish it didn't so ridiculous and wish they had a reduced size (I'm a sucker for short styled atties like my bonsai). A clapton would be beautiful in that sucker since it would really bring out a lot of flavor. I also wish they had a better wholesale distribution cause I hate ordering stuff online. I rather have it in our shop and pick it up and play with it right there and then.
lucaslink was super generous and surprised me with a velocity RDA. So I've had it for a few days and I have to say it's my new favorite RDA, for both flavor and vapor production it kicks my 454 big block's ass! It has very adjustable air flow so you can easily change between a warm dense vape and a cooler super cloudy vape.
Right now I have a braided 26ga coil that's probably around .2 ohms
For comparison sake the 454 does go through less juice but that could be due to the braided coil. Also the velocity leaks less often but when it does leak it leaks more juice than the 454.
It's a great atty! I just wish it didn't so ridiculous and wish they had a reduced size (I'm a sucker for short styled atties like my bonsai). A clapton would be beautiful in that sucker since it would really bring out a lot of flavor. I also wish they had a better wholesale distribution cause I hate ordering stuff online. I rather have it in our shop and pick it up and play with it right there and then.
I planned to wrap a clapton for it but I was out of 22ga. :))
I thought it looked a bit to tall but it looks amazing on my paragon midnight clone.
lucaslink was super generous and surprised me with a velocity RDA. So I've had it for a few days and I have to say it's my new favorite RDA, for both flavor and vapor production it kicks my 454 big block's ass! It has very adjustable air flow so you can easily change between a warm dense vape and a cooler super cloudy vape.
Right now I have a braided 26ga coil that's probably around .2 ohms
For comparison sake the 454 does go through less juice but that could be due to the braided coil. Also the velocity leaks less often but when it does leak it leaks more juice than the 454.
It's a great atty! I just wish it didn't so ridiculous and wish they had a reduced size (I'm a sucker for short styled atties like my bonsai). A clapton would be beautiful in that sucker since it would really bring out a lot of flavor. I also wish they had a better wholesale distribution cause I hate ordering stuff online. I rather have it in our shop and pick it up and play with it right there and then.
I planned to wrap a clapton for it but I was out of 22ga. :))
I thought it looked a bit to tall but it looks amazing on my paragon midnight clone.QuoteA velocity mini does exist. Also, there's like 1120319123098 clones floating around, so it should be at some distributor or other. Source: bought my velocity from a store.
I've been running a dual 32 over 26 clapton build in mine and it's good stuff.
Gotta find that mini. I don't do clones tho so let's see what happens
Hi again everyone! I finally dialed in my stock tank and settings. 400F and 50W, burns a nice smooth cool cloudy hit which i love. I did a bit more research on coils and settings and realized my issue was using the 1.5 coil with way to high of settings. Using the 1.5 coil and Turning the settings down to about 6-7.5w i was able to get a good hit off the subtank.
But of course, here come my current situations / question :))
1) I got in my nickel coils for the subtank. They are .15 ohms, the problem comes up as my box will only see it as a .2 and just burns way to strong even if i turn the settings was down. Not sure if im just dumb, but i cannot for the life of me get it to work. Also, any time i change tanks the box takes me a few times for it to recognize the proper resistance. Like with my ONE mega and the .2 coil, it will recognize any where from .18 to .28. Once i get it dialed in right its great, but ive had it take 15 minutes of re-attaching the tank until it gets the right resistance.
2) More of a noob question that i've found 10 different answers to. How do you change the liquids in your tanks? Do you need to change the atomizer every time, i read somewhere to empty your tank and then just click the power button a few times to "dry burn" any juice left in the coils out.
Sorry if im asking a lot of questions. So far Im loving it. Even when things go wrong, i just find it a good time to learn something, not get frustrated.
Picked up the smok tvf4 mini my first experience using Clapton coils comes with a really easy to use rba and this thing chucks vapor and chugs juice unfortunately. It came with giant sextuplets core coil heads that drain a 4ml resy in a handful of vapes :eek: I've been dialing it way back on the rba head and its got amazing taste and sips rather than chugs the juice which is one of the reasons I wanted it. Overall pretty happy subtank wise the uwell and this smok are definetely my faves that I have used
Picked up the smok tvf4 mini my first experience using Clapton coils comes with a really easy to use rba and this thing chucks vapor and chugs juice unfortunately. It came with giant sextuplets core coil heads that drain a 4ml resy in a handful of vapes :eek: I've been dialing it way back on the rba head and its got amazing taste and sips rather than chugs the juice which is one of the reasons I wanted it. Overall pretty happy subtank wise the uwell and this smok are definetely my faves that I have used
Picked up the smok tvf4 mini my first experience using Clapton coils comes with a really easy to use rba and this thing chucks vapor and chugs juice unfortunately. It came with giant sextuplets core coil heads that drain a 4ml resy in a handful of vapes :eek: I've been dialing it way back on the rba head and its got amazing taste and sips rather than chugs the juice which is one of the reasons I wanted it. Overall pretty happy subtank wise the uwell and this smok are definetely my faves that I have used
The TFV4 is such a great tank! I'm all about my rebuildable tanks, but as far as those that are mainly using pre-made coils, the TFV4 is up there. I personally don't like the size (looks ridiculous on a IPV D2), but it gives all your needs and then some.
Picked up the smok tvf4 mini my first experience using Clapton coils comes with a really easy to use rba and this thing chucks vapor and chugs juice unfortunately. It came with giant sextuplets core coil heads that drain a 4ml resy in a handful of vapes :eek: I've been dialing it way back on the rba head and its got amazing taste and sips rather than chugs the juice which is one of the reasons I wanted it. Overall pretty happy subtank wise the uwell and this smok are definetely my faves that I have used
The TFV4 is such a great tank! I'm all about my rebuildable tanks, but as far as those that are mainly using pre-made coils, the TFV4 is up there. I personally don't like the size (looks ridiculous on a IPV D2), but it gives all your needs and then some.
The mini is a lot more reasonably sized, fortunately. I'm in the midst of changing to crown/cyclones because i'm tired of the size or waiting for SS coils though.
Picked up the smok tvf4 mini my first experience using Clapton coils comes with a really easy to use rba and this thing chucks vapor and chugs juice unfortunately. It came with giant sextuplets core coil heads that drain a 4ml resy in a handful of vapes :eek: I've been dialing it way back on the rba head and its got amazing taste and sips rather than chugs the juice which is one of the reasons I wanted it. Overall pretty happy subtank wise the uwell and this smok are definetely my faves that I have used
The TFV4 is such a great tank! I'm all about my rebuildable tanks, but as far as those that are mainly using pre-made coils, the TFV4 is up there. I personally don't like the size (looks ridiculous on a IPV D2), but it gives all your needs and then some.
The mini is a lot more reasonably sized, fortunately. I'm in the midst of changing to crown/cyclones because i'm tired of the size or waiting for SS coils though.
My suggestion: Learn how to build and get a Bellus by Youde or a Goblin Mini by Youde.
Seriously. RTAs that allow versatility such as the two mentioned give such a better vape. The Bellus especially is easy to build and is a top fill tank. Just gotta get the wicking down pat. You won't have to wait for coils or spend $20-30 on a five pack, and would just need to rebuild every 2-4 weeks (depending on juice and how low you are building). Plus if you get those two, you can just order Ni200, Ti, or SS coils by the feet for dumb cheap and fine tune it even more with the build you decide to put on. Rebuilding is a 10x better experience. I love my Goblin Mini at a single coil for flavor as well as nicotine delivery, and plan on getting a Bellus for cloud chasing fun.
Edit: RTAs also look sexier
just watched a review on the bellus by youde and was sold pretty quickly !!! For $26 shipped whats the worst that can happen haha.... Thanks again Tim you have really come through for me AGAIN 8) I wish I was closer to your shop as I would love to chill and vape.Picked up the smok tvf4 mini my first experience using Clapton coils comes with a really easy to use rba and this thing chucks vapor and chugs juice unfortunately. It came with giant sextuplets core coil heads that drain a 4ml resy in a handful of vapes :eek: I've been dialing it way back on the rba head and its got amazing taste and sips rather than chugs the juice which is one of the reasons I wanted it. Overall pretty happy subtank wise the uwell and this smok are definetely my faves that I have used
The TFV4 is such a great tank! I'm all about my rebuildable tanks, but as far as those that are mainly using pre-made coils, the TFV4 is up there. I personally don't like the size (looks ridiculous on a IPV D2), but it gives all your needs and then some.
The mini is a lot more reasonably sized, fortunately. I'm in the midst of changing to crown/cyclones because i'm tired of the size or waiting for SS coils though.
My suggestion: Learn how to build and get a Bellus by Youde or a Goblin Mini by Youde.
Seriously. RTAs that allow versatility such as the two mentioned give such a better vape. The Bellus especially is easy to build and is a top fill tank. Just gotta get the wicking down pat. You won't have to wait for coils or spend $20-30 on a five pack, and would just need to rebuild every 2-4 weeks (depending on juice and how low you are building). Plus if you get those two, you can just order Ni200, Ti, or SS coils by the feet for dumb cheap and fine tune it even more with the build you decide to put on. Rebuilding is a 10x better experience. I love my Goblin Mini at a single coil for flavor as well as nicotine delivery, and plan on getting a Bellus for cloud chasing fun.
Edit: RTAs also look sexier
just watched a review on the bellus by youde and was sold pretty quickly !!! For $26 shipped whats the worst that can happen haha.... Thanks again Tim you have really come through for me AGAIN 8) I wish I was closer to your shop as I would love to chill and vape.Picked up the smok tvf4 mini my first experience using Clapton coils comes with a really easy to use rba and this thing chucks vapor and chugs juice unfortunately. It came with giant sextuplets core coil heads that drain a 4ml resy in a handful of vapes :eek: I've been dialing it way back on the rba head and its got amazing taste and sips rather than chugs the juice which is one of the reasons I wanted it. Overall pretty happy subtank wise the uwell and this smok are definetely my faves that I have used
The TFV4 is such a great tank! I'm all about my rebuildable tanks, but as far as those that are mainly using pre-made coils, the TFV4 is up there. I personally don't like the size (looks ridiculous on a IPV D2), but it gives all your needs and then some.
The mini is a lot more reasonably sized, fortunately. I'm in the midst of changing to crown/cyclones because i'm tired of the size or waiting for SS coils though.
My suggestion: Learn how to build and get a Bellus by Youde or a Goblin Mini by Youde.
Seriously. RTAs that allow versatility such as the two mentioned give such a better vape. The Bellus especially is easy to build and is a top fill tank. Just gotta get the wicking down pat. You won't have to wait for coils or spend $20-30 on a five pack, and would just need to rebuild every 2-4 weeks (depending on juice and how low you are building). Plus if you get those two, you can just order Ni200, Ti, or SS coils by the feet for dumb cheap and fine tune it even more with the build you decide to put on. Rebuilding is a 10x better experience. I love my Goblin Mini at a single coil for flavor as well as nicotine delivery, and plan on getting a Bellus for cloud chasing fun.
Edit: RTAs also look sexier
So question guys I just got my smok mini which is my first tank with a RBA option and now I have this bellus en route (for reals I'm up to 6 different tanks now already haha :rolleyes:) where is a good place to order coil and cotton as well as other supplies. There is literally a metric **** ton of vaping sites and it hurts my head searching through miles of menus and then reading reviews etc etc. each purchase requires about 15-20 min or more of research :-X knowledge is power or something I guess but **** me running its getting a bit asinine
I also need to upgrade from my subox and evic mini. I love them but even the new 75watt firmware on the evic is a little low power wise and I'm just absolutely eating up batteries like I'm the vapagizer bunny .....
Finally got around to setting my rig up! First time doing pretty much everything, 24g Ti g1 core, 32g kanthal (which was not kind to me, kept trying to explode from the spool when I was trying to wrap, had to grab a spool tamer to get the 2nd coil done). :)) :))Show Image(http://i.imgur.com/T0WFj55.jpg)
"close enough"Show Image(http://i.imgur.com/Emvn1gu.jpg)Show Image(http://i.imgur.com/GKjdmV1.jpg)Show Image(http://i.imgur.com/DWzzJLl.jpg)Show Image(http://i.imgur.com/5An0qJm.jpg)
Finally got around to setting my rig up! First time doing pretty much everything, 24g Ti g1 core, 32g kanthal (which was not kind to me, kept trying to explode from the spool when I was trying to wrap, had to grab a spool tamer to get the 2nd coil done). :)) :))Show Image(http://i.imgur.com/T0WFj55.jpg)
"close enough"Show Image(http://i.imgur.com/Emvn1gu.jpg)Show Image(http://i.imgur.com/GKjdmV1.jpg)Show Image(http://i.imgur.com/DWzzJLl.jpg)Show Image(http://i.imgur.com/5An0qJm.jpg)
I'm thinking about getting one of the two previously mentioned RTAs to try dual parallel stainless claptons in. Will that be too much for the build deck on either?
Crown with SS coil + dna200 in tc is a dream so far.
I'm thinking about getting one of the two previously mentioned RTAs to try dual parallel stainless claptons in. Will that be too much for the build deck on either?
Crown with SS coil + dna200 in tc is a dream so far.
Depends on the gauge you use, when I clapton I use a 22 core with a 26 wrap and they end up huge but I've seen some tiny claptons.
I'm thinking about getting one of the two previously mentioned RTAs to try dual parallel stainless claptons in. Will that be too much for the build deck on either?
Crown with SS coil + dna200 in tc is a dream so far.
Depends on the gauge you use, when I clapton I use a 22 core with a 26 wrap and they end up huge but I've seen some tiny claptons.
Thinking 32 over 24.
Anyone tried the istick tc40?
Thinking of trying that with the tc coils for my melo tank.
my country is about to make vapeing illegal..... :-X
my country is about to make vapeing illegal..... :-X
What are they saying against vaping to make it illegal?
my country is about to make vapeing illegal..... :-X
What are they saying against vaping to make it illegal?
Ignorance and misinformation
US is in midst of trying to get the FDA to approve all juices and mods (made after 2007) for sale. It basically will end vaping in the US as it currently is now as the entry cost to get anything approved for sale will cost $20 - 50k.
US is in midst of trying to get the FDA to approve all juices and mods (made after 2007) for sale. It basically will end vaping in the US as it currently is now as the entry cost to get anything approved for sale will cost $20 - 50k.
I may not be educated in the ways of politics, but I don't see how this will make vaping illegal. There will be a transition period from when the law is approved to when the manufacturers have to abide by it. My guess would be in the realm of a year. While it would make it much more difficult for an individual to make and commercially sell custom box mods and such, the mass producers won't have much difficulty aside from taking a bit longer to get on the market and maybe a touch higher price tag.
Besides, it might help with some of the safety concerns of commercially available unregulated box mods, then putting unregulated batteries, and having them overheat and bad stuff happening after that.
Either way...
Was looking for a Rebuildable, and was looking to grab the Youde Goblin Mini, some nickel wire and some cotton.
My question is, since my box detects the resistance automatically, do i need to buy something that tests before hand? Or will i be good, to make the coil/wick it, and the screw just the bottom on to see the resistance?
Was looking for a Rebuildable, and was looking to grab the Youde Goblin Mini, some nickel wire and some cotton.
My question is, since my box detects the resistance automatically, do i need to buy something that tests before hand? Or will i be good, to make the coil/wick it, and the screw just the bottom on to see the resistance?
If your box tests the resistance I don't think you'll need to test beforehand, I wrap for mechs and unless I know it'll be below 0.15ohms I don't test mine.
Was looking for a Rebuildable, and was looking to grab the Youde Goblin Mini, some nickel wire and some cotton.
My question is, since my box detects the resistance automatically, do i need to buy something that tests before hand? Or will i be good, to make the coil/wick it, and the screw just the bottom on to see the resistance?
If your box tests the resistance I don't think you'll need to test beforehand, I wrap for mechs and unless I know it'll be below 0.15ohms I don't test mine.
I would think I would be able to guess the resistance by look after a few. I just wanted to be sure.
Thanks Joey :thumb:
hey treeWas looking for a Rebuildable, and was looking to grab the Youde Goblin Mini, some nickel wire and some cotton.
My question is, since my box detects the resistance automatically, do i need to buy something that tests before hand? Or will i be good, to make the coil/wick it, and the screw just the bottom on to see the resistance?
If your box tests the resistance I don't think you'll need to test beforehand, I wrap for mechs and unless I know it'll be below 0.15ohms I don't test mine.
I would think I would be able to guess the resistance by look after a few. I just wanted to be sure.
Thanks Joey :thumb:
Got my authentic tuglyfe box today, I know some people don't like the splatter but it matches my 454 big block so I'm happy.
(Attachment Link)
I don't actually have a build in the 454 because it leaks all the time so for now I'm using my velocity with it.
(Attachment Link)
(Attachment Link)
hey treeWas looking for a Rebuildable, and was looking to grab the Youde Goblin Mini, some nickel wire and some cotton.
My question is, since my box detects the resistance automatically, do i need to buy something that tests before hand? Or will i be good, to make the coil/wick it, and the screw just the bottom on to see the resistance?
If your box tests the resistance I don't think you'll need to test beforehand, I wrap for mechs and unless I know it'll be below 0.15ohms I don't test mine.
I would think I would be able to guess the resistance by look after a few. I just wanted to be sure.
Thanks Joey :thumb:
I have a few mods that test resistance but I still picked up one because it's really easy to see if there any hot spots and to see how the cool is doing under load. I am able to make small adjustments easily with ceramic tweezers and Pop my deck back In ezpz (to many rip vids) anyways you don't need one but I picked mine up for $10 and use it all the time so it was definitely worth it 8) I love my youde bellus and almost bought the goblin mini let me know how you like it 8)
the tugboxes are so nice. I had a difficult time finding a build i thoroughly enjoyed on it though. The button is what really drives it home... so clicky.
havent posted here in a while, my desk is a mess.Show Image(http://i.imgur.com/qP8oKYn.jpg)
official problem
Was looking for a Rebuildable, and was looking to grab the Youde Goblin Mini, some nickel wire and some cotton.
My question is, since my box detects the resistance automatically, do i need to buy something that tests before hand? Or will i be good, to make the coil/wick it, and the screw just the bottom on to see the resistance?
If your box tests the resistance I don't think you'll need to test beforehand, I wrap for mechs and unless I know it'll be below 0.15ohms I don't test mine.
I would think I would be able to guess the resistance by look after a few. I just wanted to be sure.
Thanks Joey :thumb:
Was looking for a Rebuildable, and was looking to grab the Youde Goblin Mini, some nickel wire and some cotton.
My question is, since my box detects the resistance automatically, do i need to buy something that tests before hand? Or will i be good, to make the coil/wick it, and the screw just the bottom on to see the resistance?
If your box tests the resistance I don't think you'll need to test beforehand, I wrap for mechs and unless I know it'll be below 0.15ohms I don't test mine.
I would think I would be able to guess the resistance by look after a few. I just wanted to be sure.
Thanks Joey :thumb:
This should help you out
http://www.steam-engine.org/coil.asp (http://www.steam-engine.org/coil.asp)
Was looking for a Rebuildable, and was looking to grab the Youde Goblin Mini, some nickel wire and some cotton.
My question is, since my box detects the resistance automatically, do i need to buy something that tests before hand? Or will i be good, to make the coil/wick it, and the screw just the bottom on to see the resistance?
If your box tests the resistance I don't think you'll need to test beforehand, I wrap for mechs and unless I know it'll be below 0.15ohms I don't test mine.
I would think I would be able to guess the resistance by look after a few. I just wanted to be sure.
Thanks Joey :thumb:
This should help you out
http://www.steam-engine.org/coil.asp (http://www.steam-engine.org/coil.asp)
Good for a guesstimate, but don't rely on this solely.
Got my authentic tuglyfe box today, I know some people don't like the splatter but it matches my 454 big block so I'm happy.
(Attachment Link)
I don't actually have a build in the 454 because it leaks all the time so for now I'm using my velocity with it.
(Attachment Link)
(Attachment Link)
the tugboxes are so nice. I had a difficult time finding a build i thoroughly enjoyed on it though. The button is what really drives it home... so clicky.
havent posted here in a while, my desk is a mess.Show Image(http://i.imgur.com/qP8oKYn.jpg)
official problem
Vape mail from the past couple of days
2x180ml bottles of one hit wonders milk man (almost halfway done with one already haha definitely my ADV)
1x120ml of Cuttwoods Unicorn Milk
3x30ml of Revolutions Broadway E juice(love this stuff)
Coils for my UWell Crown and tvf4 minis although I mainly use the RBA Sections in both they are nice when your feeling lazy
1x Youde Bellus RDTA (excellent flavor and one of my new faves unfortunately needs MOAR AIRFLOW )
Rrr
1x Smok TVF4 Mini sub ohm tank in black (I already have one in stainless but IMO its one of the best subohm tanks there is amazing flavor,RBA Section etc etc my biggest nitpick is the size of the tank 3.5ml is too small)
1x Velocity Mini Cline from tobeco (have dual Clapton's in it right now and have been vaping it the past 2 days and i am pleasantly surprised at the taste and vapor production however it is pushing the limits of my evic minis power and draining the battery crazy fast....makes me wish I could find the authentic velocity as the clone isn't horrible )
1x Giant bag of Japanese organic cotton
2x rolls of different gauge Clapton wire
Youde v2 Coil Jig (should have gone for the v3 as the v2 works but nothing Great
Vape mail from the past couple of days
2x180ml bottles of one hit wonders milk man (almost halfway done with one already haha definitely my ADV)
1x120ml of Cuttwoods Unicorn Milk
3x30ml of Revolutions Broadway E juice(love this stuff)
Coils for my UWell Crown and tvf4 minis although I mainly use the RBA Sections in both they are nice when your feeling lazy
1x Youde Bellus RDTA (excellent flavor and one of my new faves unfortunately needs MOAR AIRFLOW )
Rrr
1x Smok TVF4 Mini sub ohm tank in black (I already have one in stainless but IMO its one of the best subohm tanks there is amazing flavor,RBA Section etc etc my biggest nitpick is the size of the tank 3.5ml is too small)
1x Velocity Mini Cline from tobeco (have dual Clapton's in it right now and have been vaping it the past 2 days and i am pleasantly surprised at the taste and vapor production however it is pushing the limits of my evic minis power and draining the battery crazy fast....makes me wish I could find the authentic velocity as the clone isn't horrible )
1x Giant bag of Japanese organic cotton
2x rolls of different gauge Clapton wire
Youde v2 Coil Jig (should have gone for the v3 as the v2 works but nothing Great
Vape mail from the past couple of days
2x180ml bottles of one hit wonders milk man (almost halfway done with one already haha definitely my ADV)
1x120ml of Cuttwoods Unicorn Milk
3x30ml of Revolutions Broadway E juice(love this stuff)
Coils for my UWell Crown and tvf4 minis although I mainly use the RBA Sections in both they are nice when your feeling lazy
1x Youde Bellus RDTA (excellent flavor and one of my new faves unfortunately needs MOAR AIRFLOW )
Rrr
1x Smok TVF4 Mini sub ohm tank in black (I already have one in stainless but IMO its one of the best subohm tanks there is amazing flavor,RBA Section etc etc my biggest nitpick is the size of the tank 3.5ml is too small)
1x Velocity Mini Cline from tobeco (have dual Clapton's in it right now and have been vaping it the past 2 days and i am pleasantly surprised at the taste and vapor production however it is pushing the limits of my evic minis power and draining the battery crazy fast....makes me wish I could find the authentic velocity as the clone isn't horrible )
1x Giant bag of Japanese organic cotton
2x rolls of different gauge Clapton wire
Youde v2 Coil Jig (should have gone for the v3 as the v2 works but nothing Great
What an order! I'm jealous of the access of to all these american liquids. It's hard for me to get a hold of in Denmark. At least from the same shop.
I think the Smok TVF4 will be my next tank. Right now I use the Kangertech SUBtank mini.
Do you know how these compare to one another? My RBA does not have much room to build but I do not know what the standard is. I'm use Clapton wire as well, 26ga + 32ga, I see that yours is 28. Wonder how much difference it makes.
Grats on the arrival of your order - really looking like a solid goody bag :)
A devilish mix of blueberries and grapes, is hosted by, a full on aniseed candy kick, underlined by a refreshing menthol exhale.
Build deck is a bit wonky, but better than the subtank's. Muchmuchmuch more airflow with the tfv4.
I like that parallel clapton roll, btw. Also, you said they were different gauge but they look the same to me.
im really enjoying RDTA's right now I have the
Build deck is a bit wonky, but better than the subtank's. Muchmuchmuch more airflow with the tfv4.
I like that parallel clapton roll, btw. Also, you said they were different gauge but they look the same to me.
Okay. I'm not sure what to get next to replace my subtank. I like the subtank alot, but I have nothing to compare it with really, only the nano, but it lacks a RBA - which i enjoy playing with.
Oh, and if anyone knows about Nicoticket e-Juice, i will remind you of the 50% off discount sale going on atm.
Quality liquid and a fully transparent company in regards of what their juices contain.
The stuff I can vouch for, is the desert juices. I have not gone over every juice yet, but so far they just have not disappointed me.
Grandma's cinnamon Danish: The cinnamon is dominant in this one, but coupled with that bakery dough it all adds up to a cinnamon based cake. This + coffee = a delicious combination, especially in the morning.
Got cookie?: Their take on a chocolate cookie juice. I'm pretty sure people are biased on this one, since the chocolate is not really chocolate, but the cocoa is definitely present and when it's paired with the sugary cookie (one on the inhale and other on exhale) I find it really delicious.
Frenilla: Sweet as hell vanilla. Very tasty. My brother could not stand it though, so this one is towards the sweet tooth. Easily an all day vape if you got a sweet tooth.
Oh one more thing I officially hate vaping on nickel or titanium ughhhhhhhh to tell you the truth I have found that the only TC vape I like is Stainless Steel the others taste funny or just don't give me the warmth and thickness I like in a vape.
im really enjoying RDTA's right now I have the
Aromamizer-
its got some quirks but a really solid choice comes in 3ml and 6ml variants very nice build feel however it pricier then the other variants nice flavor and better airflow then the bellus.
-Youde Bellus
it feels a little cheap but again its got really good flavor a 5ml tank it has an insert so you can close off the deck for single coil builds but unfortunately it cuts the air flow in half. For $25 shipped its a pretty solid choice and i feel does everything the aromimizer does (a bit differently albeit) and is $20 cheaper.
The Bellow v2
this RDTA is freaking amazing! great build quality great flavor lots of build flexibility I think this is my new favorite RDTA and you can get it at eciggity for $35 shipped.
Now the Smok tvf4 mini is what I would go for if I wanted a sub ohm tank that also has an RBA. Build quality is freaking top notch it does not leak has amazing flavor and chucks like a champ. It has a lot of coil options however they are a bit pricy ! One good thing is I'm still going 3 weeks strong on one of the pre built coils it has a bunch of extras and is currently my favorite subohm tank. My only nitpick is the fairly small tank size of 3.5ml and the fact the pre made coils drink ejuice like an alcoholic guzzling natty ice. I have a single coil build on my RBA on the mini dialed in @25watts and its sipping juice and yet has great flavor and decent vapor.
I have the regular tvf4 and it leaks and has other issues the mini IMO is a much better choice.
There are so many other setups I really want to try right now one being the haze dripper the zenith and the vapeston Magnus ni.
Oh one more thing I officially hate vaping on nickel or titanium ughhhhhhhh to tell you the truth I have found that the only TC vape I like is Stainless Steel the others taste funny or just don't give me the warmth and thickness I like in a vape.
Oh one more thing I officially hate vaping on nickel or titanium ughhhhhhhh to tell you the truth I have found that the only TC vape I like is Stainless Steel the others taste funny or just don't give me the warmth and thickness I like in a vape.
I agree whole-heartedly with this. I didn't like TC at all until I tried with SS
So my Efusion DNA 200 came in with my SOV Zenith RDTA, and I go to build the Zenith, when I notice that there is no top nut for the center post (if you don't know what that is, it is what holds the wire on the positive post). I was so excited to be disappointed right away.Sorry to hear that, really unfortunate. I can relate to your feels from similar situation unrelated to the vape world. Such a freaking bummer. :( :(
So my Efusion DNA 200 came in with my SOV Zenith RDTA, and I go to build the Zenith, when I notice that there is no top nut for the center post (if you don't know what that is, it is what holds the wire on the positive post). I was so excited to be disappointed right away.nooooo I was really looking forward to hear your experience with both of those as they are on my want really bad but can't afford right now list :eek: hopefully you can get a quick replacement Timbo !!!!
dohhh sorry bubbedi I was just stating that I am not a big fan of nickel or titanium temp control setups. When I first tried temp control nickel or titanium were your choices and I have not had a good or pleasent vape with either of them!!! I have bought a couple of temp control mods and them just put them in variable wattage or power mode and vape. I wasted a ton of coil trying both and it dust not happening. Not long ago I saw people using stainless steel for temp control and finally got around to trying it and was actually quite surprised as I enjoyed TC for the first time :thumb:im really enjoying RDTA's right now I have the
Aromamizer-
its got some quirks but a really solid choice comes in 3ml and 6ml variants very nice build feel however it pricier then the other variants nice flavor and better airflow then the bellus.
-Youde Bellus
it feels a little cheap but again its got really good flavor a 5ml tank it has an insert so you can close off the deck for single coil builds but unfortunately it cuts the air flow in half. For $25 shipped its a pretty solid choice and i feel does everything the aromimizer does (a bit differently albeit) and is $20 cheaper.
The Bellow v2
this RDTA is freaking amazing! great build quality great flavor lots of build flexibility I think this is my new favorite RDTA and you can get it at eciggity for $35 shipped.
Now the Smok tvf4 mini is what I would go for if I wanted a sub ohm tank that also has an RBA. Build quality is freaking top notch it does not leak has amazing flavor and chucks like a champ. It has a lot of coil options however they are a bit pricy ! One good thing is I'm still going 3 weeks strong on one of the pre built coils it has a bunch of extras and is currently my favorite subohm tank. My only nitpick is the fairly small tank size of 3.5ml and the fact the pre made coils drink ejuice like an alcoholic guzzling natty ice. I have a single coil build on my RBA on the mini dialed in @25watts and its sipping juice and yet has great flavor and decent vapor.
I have the regular tvf4 and it leaks and has other issues the mini IMO is a much better choice.
There are so many other setups I really want to try right now one being the haze dripper the zenith and the vapeston Magnus ni.
Oh one more thing I officially hate vaping on nickel or titanium ughhhhhhhh to tell you the truth I have found that the only TC vape I like is Stainless Steel the others taste funny or just don't give me the warmth and thickness I like in a vape.
Alright thanks for the enlightenment. An RDTA is what i will be getting next, no doubt. I just saw that you can get the Billow v2, the one I believe you mentioned, in a NANO version(or just a kit for the regular, to transform it at low cost - neat!).
Im quite certain that I will be getting the nano after what i've read about the billow v2 - thanks for mentioning it. I found it here in denmark with a 45 USD price. Probably the same when shipping adds up.
Oh one more thing I officially hate vaping on nickel or titanium ughhhhhhhh to tell you the truth I have found that the only TC vape I like is Stainless Steel the others taste funny or just don't give me the warmth and thickness I like in a vape.
I agree whole-heartedly with this. I didn't like TC at all until I tried with SS
Can you please elaborate a bit on this, im not quite sure i follow. TC = temperature control, my kanger box has TC. Stainless Steel? wat?So my Efusion DNA 200 came in with my SOV Zenith RDTA, and I go to build the Zenith, when I notice that there is no top nut for the center post (if you don't know what that is, it is what holds the wire on the positive post). I was so excited to be disappointed right away.Sorry to hear that, really unfortunate. I can relate to your feels from similar situation unrelated to the vape world. Such a freaking bummer. :( :(
So my Efusion DNA 200 came in with my SOV Zenith RDTA, and I go to build the Zenith, when I notice that there is no top nut for the center post (if you don't know what that is, it is what holds the wire on the positive post). I was so excited to be disappointed right away.
dohhh sorry bubbedi I was just stating that I am not a big fan of nickel or titanium temp control setups. When I first tried temp control nickel or titanium were your choices and I have not had a good or pleasent vape with either of them!!! I have bought a couple of temp control mods and them just put them in variable wattage or power mode and vape. I wasted a ton of coil trying both and it dust not happening. Not long ago I saw people using stainless steel for temp control and finally got around to trying it and was actually quite surprised as I enjoyed TC for the first time :thumb:
So my Efusion DNA 200 came in with my SOV Zenith RDTA, and I go to build the Zenith, when I notice that there is no top nut for the center post (if you don't know what that is, it is what holds the wire on the positive post). I was so excited to be disappointed right away.
wow for a $100 RTDA thats not cool, i just got the haze big dripper clone
http://brokevapers.com/haze-dripper-tank-rda/
makes me wanna shell out the $$$ for an authentic its so good.
dripper tanks are my jam right now, once that Zenith gets up and running let me know how it is. I cant put the Haze downdohhh sorry bubbedi I was just stating that I am not a big fan of nickel or titanium temp control setups. When I first tried temp control nickel or titanium were your choices and I have not had a good or pleasent vape with either of them!!! I have bought a couple of temp control mods and them just put them in variable wattage or power mode and vape. I wasted a ton of coil trying both and it dust not happening. Not long ago I saw people using stainless steel for temp control and finally got around to trying it and was actually quite surprised as I enjoyed TC for the first time :thumb:
have you tried nichrome? it heats up so quickly, i never got temp control to work properly. Nichrome was perfect medium for a diff taste + quicker ramp up.
You know me bro. Money ain't a thang as long as it is worth it. I'll let you know if it's worth the $100. So far no clones are out and I tried the Authentic Haze tank and it's pretty good. The Zenith allows for dual coil right off the bat and holds a lot more juice than the Haze tank. Also more airflow that you can still cut off.
just picked up a roll of it as I saw you mention it has a nice fast ramp up which I like (i tend to thread my fire buttons even when I don't Have to so the nichrome sounds nice) also did you get the tobacco haze clone punks? I always here people say tobeco when they buy clones so I don't know if they make better clones or if its a crap shoot. I saw your haze in you last post and mistook it for an authentic so it looks nice for a clone 8) ....I just don't Have a $100 to spend on a tank in not sure if I will like ....ya know. I love that there's a small portion of us keyboard enthusiasts that are krazy about vaping also !!!So my Efusion DNA 200 came in with my SOV Zenith RDTA, and I go to build the Zenith, when I notice that there is no top nut for the center post (if you don't know what that is, it is what holds the wire on the positive post). I was so excited to be disappointed right away.
wow for a $100 RTDA thats not cool, i just got the haze big dripper clone
http://brokevapers.com/haze-dripper-tank-rda/
makes me wanna shell out the $$$ for an authentic its so good.
dripper tanks are my jam right now, once that Zenith gets up and running let me know how it is. I cant put the Haze downdohhh sorry bubbedi I was just stating that I am not a big fan of nickel or titanium temp control setups. When I first tried temp control nickel or titanium were your choices and I have not had a good or pleasent vape with either of them!!! I have bought a couple of temp control mods and them just put them in variable wattage or power mode and vape. I wasted a ton of coil trying both and it dust not happening. Not long ago I saw people using stainless steel for temp control and finally got around to trying it and was actually quite surprised as I enjoyed TC for the first time :thumb:
have you tried nichrome? it heats up so quickly, i never got temp control to work properly. Nichrome was perfect medium for a diff taste + quicker ramp up.
Anyone got any recommendations on good high VG juice?
So far the Milkman by the vaping rabbit has been my favorite juice and its a 90/10 mixture.
Anyone got any recommendations on good high VG juice?
So far the Milkman by the vaping rabbit has been my favorite juice and its a 90/10 mixture.
My suggestion as always, check out mechsauce.com (http://mechsauce.com)
Anyone got any recommendations on good high VG juice?
So far the Milkman by the vaping rabbit has been my favorite juice and its a 90/10 mixture.
My suggestion as always, check out mechsauce.com (http://mechsauce.com)
Seen a lot of people recommend this site, just placed my first order :)
Kinda gotten sick of MBV lately, hope this could be a substitute. Price is fantastic but once you add $25 shipping and close to 40% import tax, its not that fantastic anymore
Anyone got any recommendations on good high VG juice?
So far the Milkman by the vaping rabbit has been my favorite juice and its a 90/10 mixture.
So I finally got the part I needed for my Zenith RDTA. It's a bit of a pain at first to build, but after its built out it's great! Still trying to get used to wicking as it is very different from any tank or rda out there. With the current build (26 g Nichrome 80 8 wrap over a 3.0 mm screw driver), it's pretty cold of a vape with airflow wide open. I had to buy the delrin chuff cap from Science of Vaping cause I've been reading that the atty gets pretty hot other wise.:eek: :eek:
As far as the Efusion DNA 200, I need to rebuild this with SS 304 so I could use the temperature control function and make it a warmer vape. So far, using my Bonsai RDA, the DNA 200 definitely is more accurate than the SXJ chips out there with straight power. Absolutely no complaints. Also for anyone using a DNA 200, use Escribe to make sure you have the right settings for your battery to get the most out of the LiPo. It took 1 hr of straight vaping using my dripper at 150 watts (which is more than enough considering I am using a reduced sized atty which is extremely warm) for the battery to be even halfway.
Here is some vape porn to end this post:Show Image(http://i.imgur.com/CFIgI9H.jpg)
So I finally got the part I needed for my Zenith RDTA. It's a bit of a pain at first to build, but after its built out it's great! Still trying to get used to wicking as it is very different from any tank or rda out there. With the current build (26 g Nichrome 80 8 wrap over a 3.0 mm screw driver), it's pretty cold of a vape with airflow wide open. I had to buy the delrin chuff cap from Science of Vaping cause I've been reading that the atty gets pretty hot other wise.:eek: :eek:
As far as the Efusion DNA 200, I need to rebuild this with SS 304 so I could use the temperature control function and make it a warmer vape. So far, using my Bonsai RDA, the DNA 200 definitely is more accurate than the SXJ chips out there with straight power. Absolutely no complaints. Also for anyone using a DNA 200, use Escribe to make sure you have the right settings for your battery to get the most out of the LiPo. It took 1 hr of straight vaping using my dripper at 150 watts (which is more than enough considering I am using a reduced sized atty which is extremely warm) for the battery to be even halfway.
Here is some vape porn to end this post:Show Image(http://i.imgur.com/CFIgI9H.jpg)
All your setups look so freaking dope..... Really sexy Tim. The only one I have tried there is the ud goblin....what's the one at the end ??
Also how sexy is that zentith
Hnnnnnng
lucaslink was super generous and surprised me with a velocity RDA. So I've had it for a few days and I have to say it's my new favorite RDA, for both flavor and vapor production it kicks my 454 big block's ass! It has very adjustable air flow so you can easily change between a warm dense vape and a cooler super cloudy vape.
Hey there my mechanical keyboard and vaping family!
So, randomly eating pizza I have come up with the idea of giving daily vape tips on this thread.
Hey there my mechanical keyboard and vaping family!
So, randomly eating pizza I have come up with the idea of giving daily vape tips on this thread.
I like the idea and greatly appreciate the sharing of your knowledge, but I feel that a tip a day will be too much to quick and leave little for the future.
Looking forward to more tips in the future!
Hey there my mechanical keyboard and vaping family!
So, randomly eating pizza I have come up with the idea of giving daily vape tips on this thread.
I like the idea and greatly appreciate the sharing of your knowledge, but I feel that a tip a day will be too much to quick and leave little for the future.
Looking forward to more tips in the future!
Yeah I was thinking about that. I'll just do weekly then. Plus I'm hungover right now and can't come up with anything
Hey there my mechanical keyboard and vaping family!
So, randomly eating pizza I have come up with the idea of giving daily vape tips on this thread.
I like the idea and greatly appreciate the sharing of your knowledge, but I feel that a tip a day will be too much to quick and leave little for the future.
Looking forward to more tips in the future!
Yeah I was thinking about that. I'll just do weekly then. Plus I'm hungover right now and can't come up with anything
hahaha. your first tip was spot on! i'd agree that daily would be too much. i have a batty conspiracy theory that the manufacturers of vape products and juices banded together to push sub-ohm on the masses in order to increase their sales of both juice and coils. that build you described above can be run lower and still blow clouds and provide a warm flavorful vape that won't cost as much in juice as its sub-ohm counterpart would.
I need one of you to put me together a budget but quality vape setup, please. I don't have the time or energy with everything going on to do it myself. I need everything, including good juice.
Please PM me if you are interested and willing to do this. I will compensate you somehow.
I need one of you to put me together a budget but quality vape setup, please. I don't have the time or energy with everything going on to do it myself. I need everything, including good juice.eleaf I stick 100w as a as $30(amazing mod for the price)
Please PM me if you are interested and willing to do this. I will compensate you somehow.5
http://www.myvaporstore.com/Uwell-Crown-Sub-Ohm-Tank-p/uwc20.htm
http://www.myvaporstore.com/Joye-eVic-VTC-Mini-60W-Express-Kit-p/joye-vtc30.htm
OR
IPv2 (as suggested by a few peoples)
and
LG HG2 batteries
Good enough to start?
Just charge via USB?
And I assume it comes with coils? Do I buy extra?
http://www.myvaporstore.com/Uwell-Crown-Sub-Ohm-Tank-p/uwc20.htm
http://www.myvaporstore.com/Joye-eVic-VTC-Mini-60W-Express-Kit-p/joye-vtc30.htm
OR
IPv2 (as suggested by a few peoples)
and
LG HG2 batteries
Good enough to start?
Just charge via USB?
And I assume it comes with coils? Do I buy extra?
Awww ****. And those colors right up my girly alley.
http://www.myvaporstore.com/Uwell-Crown-Sub-Ohm-Tank-p/uwc20.htm
http://www.myvaporstore.com/Joye-eVic-VTC-Mini-60W-Express-Kit-p/joye-vtc30.htm
OR
IPv2 (as suggested by a few peoples)
and
LG HG2 batteries
Good enough to start?
Just charge via USB?
And I assume it comes with coils? Do I buy extra?
https://www.elementvape.com/kanger-subox-nano-starter-kit
https://www.elementvape.com/charlie-s-chalk-dust-combo-pack-5-flavors
+20% off juicedup20
$80
your gonna wanna start with a tank, and this is a great mod/combo for the price. Kanger USB charging is great as well.
5 15mls for about $8 each with varying flavors to see which flavor you like the best.
The only downside I have with the subtanks is you aren't going to be able to get as deep of a pull as you will the crowns. Also, if you go kanger - https://www.elementvape.com/kanger-nebox-60w-sub-ohm-kit
Awww ****. And those colors right up my girly alley.
The only downside I have with the subtanks is you aren't going to be able to get as deep of a pull as you will the crowns. Also, if you go kanger - https://www.elementvape.com/kanger-nebox-60w-sub-ohm-kit
Same coils/airflow/usb charging, but with 2.66x the juice capacity and a protected reservoir because it's in the mod itself.http://www.myvaporstore.com/Uwell-Crown-Sub-Ohm-Tank-p/uwc20.htm
http://www.myvaporstore.com/Joye-eVic-VTC-Mini-60W-Express-Kit-p/joye-vtc30.htm
OR
IPv2 (as suggested by a few peoples)
and
LG HG2 batteries
Good enough to start?
Just charge via USB?
And I assume it comes with coils? Do I buy extra?
https://www.elementvape.com/kanger-subox-nano-starter-kit
https://www.elementvape.com/charlie-s-chalk-dust-combo-pack-5-flavors
+20% off juicedup20
$80
your gonna wanna start with a tank, and this is a great mod/combo for the price. Kanger USB charging is great as well.
5 15mls for about $8 each with varying flavors to see which flavor you like the best.
He had a tank link, btw. The subox is a fine entry level kit, but the crown/evic (or d2) will grow with him for not a lot more $
Why is there a power input on the bottom of the IPV d2 if the chargers they offer are external "bay" chargers?
The only downside I have with the subtanks is you aren't going to be able to get as deep of a pull as you will the crowns. Also, if you go kanger - https://www.elementvape.com/kanger-nebox-60w-sub-ohm-kit
Not phallic enough. I want the girls to thing I have a big swinger in my pants.
Ugh. I don't want to be carrying batteries. I don't want to be leaving them in the freezing car while I'm in and out of hospitals for the next 3 months.
So you are saying if I get the Sigelei and only run it half wattage or less, the **** will last much longer? That makes a ton of sense.
http://www.myvaporstore.com/Uwell-Crown-Sub-Ohm-Tank-p/uwc20.htm
http://www.myvaporstore.com/Joye-eVic-VTC-Mini-60W-Express-Kit-p/joye-vtc30.htm
OR
IPv2 (as suggested by a few peoples)
and
LG HG2 batteries
Good enough to start?
Just charge via USB?
And I assume it comes with coils? Do I buy extra?
What are these sub ohm warning on all the sites? Just make sure I have the right settings for my tank set on the mod before I try to smoke it?
EDIT: Thanks again for babying me through this you guys. I really hope this stops me from getting back into cigs. Another reason I owe GH serious love.
EDIT 2: Order today or wait to see if they drop prices again on Friday?
What are these sub ohm warning on all the sites? Just make sure I have the right settings for my tank set on the mod before I try to smoke it?https://www.reddit.com/r/electronic_cigarette/comments/3u8hql/thanksgiving_weekend_megathread/
EDIT: Thanks again for babying me through this you guys. I really hope this stops me from getting back into cigs. Another reason I owe GH serious love.
EDIT 2: Order today or wait to see if they drop prices again on Friday?
What are these sub ohm warning on all the sites? Just make sure I have the right settings for my tank set on the mod before I try to smoke it?https://www.reddit.com/r/electronic_cigarette/comments/3u8hql/thanksgiving_weekend_megathread/
EDIT: Thanks again for babying me through this you guys. I really hope this stops me from getting back into cigs. Another reason I owe GH serious love.
EDIT 2: Order today or wait to see if they drop prices again on Friday?
Show Image(http://i.imgur.com/Vknku8tl.jpg)
Happy holiday season bump from across the Pacific
Okay. Took a bit of advice from everyone! Hope this works! THANK YOU ALL!Show Image(http://i.imgur.com/VvuuTpv.jpg)
Good day for vape mail my OBS crius, Sapor and haze dripper tank clone came in today (hazz dripper lols) anyways I have gone a little crazy with the rtas lately but they are so nice and have become my favorite style tank I now have the billow2,aromamizer,youde bellus and obs crius
Okay. Took a bit of advice from everyone! Hope this works! THANK YOU ALL!Show Image(http://i.imgur.com/VvuuTpv.jpg)
awesome thats an amazing set up.
I wish i had posted here before buying a pen/tank and wasting $100, luckily Sir BunnyLake hooked me up and set me straight.
when you get comfortable and wanna try new coils hit me up and ill mail you some
I went with 6mg juice to start and will just go down to 1.5 or 0 after I reorder.
I went with 6mg juice to start and will just go down to 1.5 or 0 after I reorder.
Consider dropping to 3 before hitting 1.5 or 0. Not sure what your smoking situation is like right now, but while it might not seem like a big drop, your body might think otherwise. My personal experience is that I find myself vaping more at 3mg than I did at 6. I physically can't vape 6 anymore (I get a 'nic od') but the drop from 6 to 1.5 is larger than one might think. Do it if your goal is to get off nic entirely, but I'd hate to see you hit a smoke cause you were having a nic fit and just needed a fix. Good choices though.
The o-ring on my Vertex v2 broke, been to lazy to find a replacement so it's still loose. I for sure thought there was a spare in the box but now I can't even seem to find the box itself. At least I got about a year use out of it before the o-ring broke.
My bottle of milk man showed up today and I hate to say it but my favorite part is the unicorn bottles that come with it, they seem perfect for carrying juice.
keep it in your glove box for 3 days, it gets amazing. When i got my first bottle of it it was good but had a slight "pickle"taste... after it steeped that pickle turned into a dense cream... so good
currently vaping My Man by them, and had to do the same steeping process.
My Man is Milkman but with vanilla added, i dont get the chocolate taste at all. its still banging
i had to do that with my RocketMan juice by them. The sample i had was so strong but when i ordered a bottle of it, it was weaker. Mixed it with WhitEOctopus Ink (black Currant) and it went from meh to insane. Milkman is definitely my ADV, loaded with sugar but screw it.
how are you digging the tugbox? I picked up a fasttech dinghy clone for $17, and they are top notch clones. if not real flawless with slight imperfections, (my post was a tiny bit leaning). Its so stealth and powerful. Props on picking up an authentic, those clones look like ****. Squishy non click button and hot glued wiring, not to mention flawless's cerakote paint jobs last forever. I picked up a NEBOX for my GF and the paint is already chipped...Show Image(http://i.imgur.com/GhZNppz.jpg)
this is getting lengthy, perhaps should be in the vaping thread
eJuice Direct, is doing a 5$ eJuice grab bag were you get at least 30ml of juice. Im ordering two!
http://www.ejuicedirect.com/collections/black-friday-deals/products/premium-ejuice-grab-bag?variant=9173148421
eJuice Direct, is doing a 5$ eJuice grab bag were you get at least 30ml of juice. Im ordering two!
http://www.ejuicedirect.com/collections/black-friday-deals/products/premium-ejuice-grab-bag?variant=9173148421
nice post!
i hate that i cant use paypal on ejuice sites :'(
Ugh. I'm so scared of all these sweet/fruity juices. And I don't want MENTHOL flavored, but maybe some kind of mint?
Ugh. I'm so scared of all these sweet/fruity juices. And I don't want MENTHOL flavored, but maybe some kind of mint?
My favorites have been the milky flavors. The milkman by the vaping rabbit is my current ADV, I've also really like milk and honey by cosmic fog and unicorn milk by cuttwood.
Ugh. I'm so scared of all these sweet/fruity juices. And I don't want MENTHOL flavored, but maybe some kind of mint?
My favorites have been the milky flavors. The milkman by the vaping rabbit is my current ADV, I've also really like milk and honey by cosmic fog and unicorn milk by cuttwood.
Hmmm "pastry, vanilla, milk"... and max VG. I assume for health reasons, less PG is better...
Ugh. I'm so scared of all these sweet/fruity juices. And I don't want MENTHOL flavored, but maybe some kind of mint?
My favorites have been the milky flavors. The milkman by the vaping rabbit is my current ADV, I've also really like milk and honey by cosmic fog and unicorn milk by cuttwood.
Hmmm "pastry, vanilla, milk"... and max VG. I assume for health reasons, less PG is better...
I think the PG/VG is more of a personal opinion. Higher VG gives cloudier hits with more mellow flavors. Better for an ADV, in my opinion anyways.
Ugh. I'm so scared of all these sweet/fruity juices. And I don't want MENTHOL flavored, but maybe some kind of mint?
My favorites have been the milky flavors. The milkman by the vaping rabbit is my current ADV, I've also really like milk and honey by cosmic fog and unicorn milk by cuttwood.
Hmmm "pastry, vanilla, milk"... and max VG. I assume for health reasons, less PG is better...
I think the PG/VG is more of a personal opinion. Higher VG gives cloudier hits with more mellow flavors. Better for an ADV, in my opinion anyways.
Just from memory, I thought PG was antifreeze. I think I may have been mistaking it for EG.
Ugh. I'm so scared of all these sweet/fruity juices. And I don't want MENTHOL flavored, but maybe some kind of mint?
My favorites have been the milky flavors. The milkman by the vaping rabbit is my current ADV, I've also really like milk and honey by cosmic fog and unicorn milk by cuttwood.
Hmmm "pastry, vanilla, milk"... and max VG. I assume for health reasons, less PG is better...
I think the PG/VG is more of a personal opinion. Higher VG gives cloudier hits with more mellow flavors. Better for an ADV, in my opinion anyways.
Just from memory, I thought PG was antifreeze. I think I may have been mistaking it for EG.
Propylene glycol, on the other hand, is considerably less toxic than ethylene glycol and may be labeled as "non-toxic antifreeze". It is used as antifreeze where ethylene glycol would be inappropriate, such as in food-processing systems or in water pipes in homes where incidental ingestion may be possible. As confirmation of its relative non-toxicity, the FDA allows propylene glycol to be added to a large number of processed foods, including ice cream, frozen custard, salad dressings and baked goods.
Ugh. I'm so scared of all these sweet/fruity juices. And I don't want MENTHOL flavored, but maybe some kind of mint?
My favorites have been the milky flavors. The milkman by the vaping rabbit is my current ADV, I've also really like milk and honey by cosmic fog and unicorn milk by cuttwood.
Hmmm "pastry, vanilla, milk"... and max VG. I assume for health reasons, less PG is better...
I think the PG/VG is more of a personal opinion. Higher VG gives cloudier hits with more mellow flavors. Better for an ADV, in my opinion anyways.
Ugh. I'm so scared of all these sweet/fruity juices. And I don't want MENTHOL flavored, but maybe some kind of mint?
My favorites have been the milky flavors. The milkman by the vaping rabbit is my current ADV, I've also really like milk and honey by cosmic fog and unicorn milk by cuttwood.
Hmmm "pastry, vanilla, milk"... and max VG. I assume for health reasons, less PG is better...
I think the PG/VG is more of a personal opinion. Higher VG gives cloudier hits with more mellow flavors. Better for an ADV, in my opinion anyways.
PG messes with my throat so I always go max VG.
As far as my ADV right now I switch between Milkman, Lunar Harvest Black, or a mix of both.
If you want a good fruit flavor in the sea of juicy fruit crap I'd recommend Lunar Harvest Black.
Ugh. I'm so scared of all these sweet/fruity juices. And I don't want MENTHOL flavored, but maybe some kind of mint?
My favorites have been the milky flavors. The milkman by the vaping rabbit is my current ADV, I've also really like milk and honey by cosmic fog and unicorn milk by cuttwood.
Hmmm "pastry, vanilla, milk"... and max VG. I assume for health reasons, less PG is better...
I think the PG/VG is more of a personal opinion. Higher VG gives cloudier hits with more mellow flavors. Better for an ADV, in my opinion anyways.
PG messes with my throat so I always go max VG.
As far as my ADV right now I switch between Milkman, Lunar Harvest Black, or a mix of both.
If you want a good fruit flavor in the sea of juicy fruit crap I'd recommend Lunar Harvest Black.
lol i am yet to meet anyone who hasnt had issues with PG,
i was trying to figure out why i was getting body acne at 27. Everyone told me it was the "quit zits" from quitting smoking. A lot of cheap shampoos have PG as a main ingredient. If you get alot of dandruff/itchy scalp from using PG shampoo, stay away from high PG juices. I switched to 70/30 80/20 blends and my acne went away.
**** trees.
Bwwahahaha. Incoming noob moments...
1. Put together, filled center hole by accident, sucked up juice into mouf.
2. Did not open air flow adjustment so was not getting hits and just burning my fingers.
3. Put it at 60w and tugged SO hard for 10 seconds after not getting any flow earlier. Coughed so hard almost puked.
Question: How do I adjust the resistance? Or does it auto? I have .15 coil in and sometimes showing resistance of .27 but mostly .17. Can that blow up in my face?Show Image(http://i.imgur.com/EFHNFbo.jpg)Show Image(http://i.imgur.com/k5L9mNI.jpg)
Question: How do I adjust the resistance? Or does it auto? I have .15 coil in and sometimes showing resistance of .27 but mostly .17. Can that blow up in my face?
Bwwahahaha. Incoming noob moments...
1. Put together, filled center hole by accident, sucked up juice into mouf.
2. Did not open air flow adjustment so was not getting hits and just burning my fingers.
3. Put it at 60w and tugged SO hard for 10 seconds after not getting any flow earlier. Coughed so hard almost puked.
Question: How do I adjust the resistance? Or does it auto? I have .15 coil in and sometimes showing resistance of .27 but mostly .17. Can that blow up in my face?Show Image(http://i.imgur.com/EFHNFbo.jpg)Show Image(http://i.imgur.com/k5L9mNI.jpg)
You don't, the resistance is solely hardware measurement of the coil. Are you using the ni200 coils? They have a weird resistance swing, it won't be an issue, but you should run in TC if you're using nickle.
Bwwahahaha. Incoming noob moments...
1. Put together, filled center hole by accident, sucked up juice into mouf.
2. Did not open air flow adjustment so was not getting hits and just burning my fingers.
3. Put it at 60w and tugged SO hard for 10 seconds after not getting any flow earlier. Coughed so hard almost puked.
Question: How do I adjust the resistance? Or does it auto? I have .15 coil in and sometimes showing resistance of .27 but mostly .17. Can that blow up in my face?Show Image(http://i.imgur.com/EFHNFbo.jpg)Show Image(http://i.imgur.com/k5L9mNI.jpg)
You don't, the resistance is solely hardware measurement of the coil. Are you using the ni200 coils? They have a weird resistance swing, it won't be an issue, but you should run in TC if you're using nickle.
Yes. Pre-installed ni200. TC is temperature controlled? If so, what C or F?
Gonna try that.
Also I think pouring **** down the middle made juice leak out of the air control slots and down into the mod. Uh ohs.
This juice is everywhere.
I really should read directions.
EDIT:
Also... this thing is huge. I need bigger pockets or a much smaller mod and tank for when inside places on the move.
Okay. I'm now in TC mode at 450 F. Running about 30.0J gets me a much easier hit. Might jack it up to 35ish.
I think I was burning up my coil and **** before (and prolly my lungs and throat).
Also, resistance is now reading .16, so I think I'm good there.
Haven't had a cig in 3 hours. If I make it through til the morning this thing is already a smashing success.
Okay. I'm now in TC mode at 450 F. Running about 30.0J gets me a much easier hit. Might jack it up to 35ish.
I think I was burning up my coil and **** before (and prolly my lungs and throat).
Also, resistance is now reading .16, so I think I'm good there.
Haven't had a cig in 3 hours. If I make it through til the morning this thing is already a smashing success.
TC right off the bat?!
We gotta bad ass here! :eek:
haha I was thinking the same thing..... Took me a minute to get into tc and then I only really liked SSOkay. I'm now in TC mode at 450 F. Running about 30.0J gets me a much easier hit. Might jack it up to 35ish.
I think I was burning up my coil and **** before (and prolly my lungs and throat).
Also, resistance is now reading .16, so I think I'm good there.
Haven't had a cig in 3 hours. If I make it through til the morning this thing is already a smashing success.
TC right off the bat?!
We gotta bad ass here! :eek:
Should I just buy a cheap**** pen for this?
If someone besides me wants a reauleaux, good price plus free batteriesThey're pretty fast on shipping as well. Ordered on black Friday and managed to get my package yesterday on the east coast
http://vapenw.com/reuleaux-dna-200-mod-by-wismec
So I have been using my istick TC40 for a week or two. It was very different from the usual VV/VW modes. For the record I am using the Melo tank from eLeaf as well. Also, I think this is going to be my last eLeaf product. My 30 watt istick only lasted a few months. I guess you get what you pay for. It was showing short circuit for anything I put on it.
Either way, for those of you that started long before TC, when switching to it, did you find your juice preference changed?
A flavor I get from a local shop, tastes completely different on TC than it does on VW.
If someone besides me wants a reauleaux, good price plus free batteriesthis is where I got mine for $40 on bf
http://vapenw.com/reuleaux-dna-200-mod-by-wismec
3.5 hours to get 1 bar of charge. I thought either the charger or the batteries were busted.
Then 3 hours for the next 4 bars, and I'm charged.
3.5 hours to get 1 bar of charge. I thought either the charger or the batteries were busted.
Then 3 hours for the next 4 bars, and I'm charged.
My mod doesnt use batteries, but that doesnt seem right to me.
In other news, my 'Churrios' by the vaping rabbit came in. It tastes exactly like a bowl of cinnamon toast crunch. I also switched from TC mode to power controlled mode, and the flavors are much better and give a better hit, but it kills my battery and drinks juice like a capri-sun.
3.5 hours to get 1 bar of charge. I thought either the charger or the batteries were busted.
Then 3 hours for the next 4 bars, and I'm charged.
My mod doesnt use batteries, but that doesnt seem right to me.
In other news, my 'Churrios' by the vaping rabbit came in. It tastes exactly like a bowl of cinnamon toast crunch. I also switched from TC mode to power controlled mode, and the flavors are much better and give a better hit, but it kills my battery and drinks juice like a capri-sun.
I emailed returns @ elementvape and we'll see what they say about the charger. They shipped **** so fast, I assume their CS will be decent.
And I bought all Ni200 coils... I'm stuck with TC for now to not blow my face off?
So elementvape said my charger is fine. Could vary on battery manufacture, how much I ran them down, etc. 3-8 hours is acceptable, but I should eventually try diff batteries.
I just need a back-up plan if it is going to take 6 hours. Can't run to a cig.
So elementvape said my charger is fine. Could vary on battery manufacture, how much I ran them down, etc. 3-8 hours is acceptable, but I should eventually try diff batteries.
I just need a back-up plan if it is going to take 6 hours. Can't run to a cig.
Time for more batteries!
So elementvape said my charger is fine. Could vary on battery manufacture, how much I ran them down, etc. 3-8 hours is acceptable, but I should eventually try diff batteries.
I just need a back-up plan if it is going to take 6 hours. Can't run to a cig.
Time for more batteries!
Can never have too many batteries.
Okay. I'm now in TC mode at 450 F. Running about 30.0J gets me a much easier hit. Might jack it up to 35ish.absyrd I have some gear for you hun8) 3-4 .5 ss premades for your crown and some other stuff(i have the rba deck for it so i build my own and don't need them).... The stainless steel coils for the the crown have pretty good flavor also
I think I was burning up my coil and **** before (and prolly my lungs and throat).
Also, resistance is now reading .16, so I think I'm good there.
Haven't had a cig in 3 hours. If I make it through til the morning this thing is already a smashing success.
If this continues to work and you all basically save my hubby's life I pretty much owe you all... you know... favors :-*
He has heart disease and cancer in his family history
I've seen enough hospitals for a lifetime
Okay. I'm now in TC mode at 450 F. Running about 30.0J gets me a much easier hit. Might jack it up to 35ish.absyrd I have some gear for you hun8) 3-4 .5 ss premades for your crown and some other stuff(i have the rba deck for it so i build my own and don't need them).... The stainless steel coils for the the crown have pretty good flavor also
I think I was burning up my coil and **** before (and prolly my lungs and throat).
Also, resistance is now reading .16, so I think I'm good there.
Haven't had a cig in 3 hours. If I make it through til the morning this thing is already a smashing success.
The ****? The resistance on my ni200 decided to go up to .23 after I took the whole tank off after spilling. Could that be from getting juice on the contact?
Picked up my custom box today.I love my lush wotofo makes some nice affordable products!!
CNC aluminum case with magnetic cover. Painted and cleared with automotive paint.
Dual 18650 in series with a Raptor step-down chip.
RDA is the Lush by Wotofo. Dual 5 wrap 24 awg kanthal. (0.25 ohm). I've been keeping the box at about 40% power.Show Image(http://i.imgur.com/uu1q9gS.jpg)Show Image(http://i.imgur.com/46rXdqU.jpg)Show Image(http://i.imgur.com/ueTcrbs.jpg)
Got my jaybo wismec reuleaux today with 3x@18650s been running temp control all day through my also wismec/jaybo indestructible (figure I would match my rba with my mod 8)...)with dual 6wrap 24g stainless steel hitting it hard and the battery has not gone down at all after 8 hours haha I'm loving this .....I highly recommend updating the firmware if you have this mod because mine was all over with the resistance and tc modes were jacked up.
Got my jaybo wismec reuleaux today with 3x@18650s been running temp control all day through my also wismec/jaybo indestructible (figure I would match my rba with my mod 8)...)with dual 6wrap 24g stainless steel hitting it hard and the battery has not gone down at all after 8 hours haha I'm loving this .....I highly recommend updating the firmware if you have this mod because mine was all over with the resistance and tc modes were jacked up.
Got my grab bag juices in and I got:
$100 apple pie (high VG) by nothern lights cape co - it's really good! Nice fresh apple flavor with a hint of cinnamon crust flavor
Key Lime Cookie by Ripe Vapes - I haven't tried this yet, but I will as soon as I finish a tank of the apple pie. It smells really good though.
I'm in the same boat as sed8, I've dropped TC and have been thinking about a mechanical mod or maybe just a better/more powerful mod and would love some recommendations!
Is TC @ 450F with 35-40J causing me to go through juice and batteries so quick? I really like the hits I'm getting as it feels like a cig. I guess that is the trade-off?450f is not insanely high for Tc mode however I have not been using joules as a measurement most the time. I'm not sure if that's high or not ..? Maybe someone here can comment ...? Anyways I'm sorry to here your struggling a bit out the gate absurd although I can say you seem to have taken to it very swiftly with much fewer (big) mistakes then I did at first. 8) TJs recommendation for for the brown LG batteries is a solid one (hg2s I believe) they are a 3000mah 20a (tested and proven ) battery your vtc4s while awesome batteries are only 2100 mah basically they hit a bit harder but don't last as long . I found them on sale for $6 a piece I think ..... Also pm your addy so I can shoot you some goodies 8)
And the reauleaux looks awesome. Way more than I need right now, but cool nonetheless.
Man am I spamming this thread. Sorry guys. I just don't feel like delving into the vape forums. Rather stick with the nerds I know.http://www.vaporkings.com/Aluminum-510-threaded-atomizer-stand-p/attystand.htm
Anyone recommend a storage container or "stand" for tanks? I'd really like to keep my ADV in one and all the fruity experiments in another tank.
Man am I spamming this thread. Sorry guys. I just don't feel like delving into the vape forums. Rather stick with the nerds I know.
Anyone recommend a storage container or "stand" for tanks? I'd really like to keep my ADV in one and all the fruity experiments in another tank.
You could get a tugboat clone for $30ish but I'd recommend the authentic. I dropped mine last night and it was kicked across a concrete floor, the cerakote is almost flawless after it.Picked up my custom box today.I love my lush wotofo makes some nice affordable products!!
CNC aluminum case with magnetic cover. Painted and cleared with automotive paint.
Dual 18650 in series with a Raptor step-down chip.
RDA is the Lush by Wotofo. Dual 5 wrap 24 awg kanthal. (0.25 ohm). I've been keeping the box at about 40% power.Show Image(http://i.imgur.com/uu1q9gS.jpg)Show Image(http://i.imgur.com/46rXdqU.jpg)Show Image(http://i.imgur.com/ueTcrbs.jpg)
I have really been wanting to get a mechanical or unregulated mod. Does anyone know of a decent one for $75-$100 ??? I know flawless has the tug boxes for $125 but I was hoping to spend a little less
Beautiful custom by the way !!!!
You could get a tugboat clone for $30ish but I'd recommend the authentic. I dropped mine last night and it was kicked across a concrete floor, the cerakote is almost flawless after it.Picked up my custom box today.I love my lush wotofo makes some nice affordable products!!
CNC aluminum case with magnetic cover. Painted and cleared with automotive paint.
Dual 18650 in series with a Raptor step-down chip.
RDA is the Lush by Wotofo. Dual 5 wrap 24 awg kanthal. (0.25 ohm). I've been keeping the box at about 40% power.Show Image(http://i.imgur.com/uu1q9gS.jpg)Show Image(http://i.imgur.com/46rXdqU.jpg)Show Image(http://i.imgur.com/ueTcrbs.jpg)
I have really been wanting to get a mechanical or unregulated mod. Does anyone know of a decent one for $75-$100 ??? I know flawless has the tug boxes for $125 but I was hoping to spend a little less
Beautiful custom by the way !!!!
I'd assume they are but I've never seen one.You could get a tugboat clone for $30ish but I'd recommend the authentic. I dropped mine last night and it was kicked across a concrete floor, the cerakote is almost flawless after it.Picked up my custom box today.I love my lush wotofo makes some nice affordable products!!
CNC aluminum case with magnetic cover. Painted and cleared with automotive paint.
Dual 18650 in series with a Raptor step-down chip.
RDA is the Lush by Wotofo. Dual 5 wrap 24 awg kanthal. (0.25 ohm). I've been keeping the box at about 40% power.Show Image(http://i.imgur.com/uu1q9gS.jpg)Show Image(http://i.imgur.com/46rXdqU.jpg)Show Image(http://i.imgur.com/ueTcrbs.jpg)
I have really been wanting to get a mechanical or unregulated mod. Does anyone know of a decent one for $75-$100 ??? I know flawless has the tug boxes for $125 but I was hoping to spend a little less
Beautiful custom by the way !!!!
Are the 200w regulated tug boxes just as good?
http://flawlessvapeshop.com/200watt-tuglyfe-box-mod/ - these guys right hereI'd assume they are but I've never seen one.You could get a tugboat clone for $30ish but I'd recommend the authentic. I dropped mine last night and it was kicked across a concrete floor, the cerakote is almost flawless after it.Picked up my custom box today.I love my lush wotofo makes some nice affordable products!!
CNC aluminum case with magnetic cover. Painted and cleared with automotive paint.
Dual 18650 in series with a Raptor step-down chip.
RDA is the Lush by Wotofo. Dual 5 wrap 24 awg kanthal. (0.25 ohm). I've been keeping the box at about 40% power.Show Image(http://i.imgur.com/uu1q9gS.jpg)Show Image(http://i.imgur.com/46rXdqU.jpg)Show Image(http://i.imgur.com/ueTcrbs.jpg)
I have really been wanting to get a mechanical or unregulated mod. Does anyone know of a decent one for $75-$100 ??? I know flawless has the tug boxes for $125 but I was hoping to spend a little less
Beautiful custom by the way !!!!
Are the 200w regulated tug boxes just as good?
I meant I've never seen one in person. My unregulated tugbox is great so I'd recommend the company if you're looking for a box. I've heard good things about the 200w.http://flawlessvapeshop.com/200watt-tuglyfe-box-mod/ - these guys right hereI'd assume they are but I've never seen one.You could get a tugboat clone for $30ish but I'd recommend the authentic. I dropped mine last night and it was kicked across a concrete floor, the cerakote is almost flawless after it.Picked up my custom box today.I love my lush wotofo makes some nice affordable products!!
CNC aluminum case with magnetic cover. Painted and cleared with automotive paint.
Dual 18650 in series with a Raptor step-down chip.
RDA is the Lush by Wotofo. Dual 5 wrap 24 awg kanthal. (0.25 ohm). I've been keeping the box at about 40% power.Show Image(http://i.imgur.com/uu1q9gS.jpg)Show Image(http://i.imgur.com/46rXdqU.jpg)Show Image(http://i.imgur.com/ueTcrbs.jpg)
I have really been wanting to get a mechanical or unregulated mod. Does anyone know of a decent one for $75-$100 ??? I know flawless has the tug boxes for $125 but I was hoping to spend a little less
Beautiful custom by the way !!!!
Are the 200w regulated tug boxes just as good?
Man am I spamming this thread. Sorry guys. I just don't feel like delving into the vape forums. Rather stick with the nerds I know.
Anyone recommend a storage container or "stand" for tanks? I'd really like to keep my ADV in one and all the fruity experiments in another tank.
You could always make your own. Here's mineMoreShow Image(http://i.imgur.com/yHOuEPI.jpg)
You could always make your own. Here's mineMoreShow Image(http://i.imgur.com/yHOuEPI.jpg)
I wonder if Inanis could make those? I would love a cool little shelf for juice bottles like that too.
You could always make your own. Here's mineMoreShow Image(http://i.imgur.com/yHOuEPI.jpg)
I wonder if Inanis could make those? I would love a cool little shelf for juice bottles like that too.
You are a ****ing genius. Gonna talk to her right now.
I can totally do this. It is like a shorter, longer pen holder with bigger holes. I don't vape though and I have no clue how big the holes actually need to be, or how high would be appropriate to hold the equipment properly. Someone would have to tell me, or point me to some dimensions. Hook me up with the info and I'll see what I can do. I sent absyrd a few pictures of stuff I've been working on for other things to see if I'm in the ballpark.
Yeah the attachment nub at the bottom to balance is prob important.
See this ebay jawn:
http://www.ebay.com/itm/like/252174952026?ul_noapp=true&chn=ps&lpid=82
And this:
http://www.ebay.com/itm/like/391208171301?ul_noapp=true&chn=ps&lpid=82
And plenty of others I found but hate.
C'mon inanis!
And who has more dimensions or an extra tank they can ship her?
I can totally do this. It is like a shorter, longer pen holder with bigger holes. I don't vape though and I have no clue how big the holes actually need to be, or how high would be appropriate to hold the equipment properly. Someone would have to tell me, or point me to some dimensions. Hook me up with the info and I'll see what I can do. I sent absyrd a few pictures of stuff I've been working on for other things to see if I'm in the ballpark.
You's the best my east coast brother. I can work on it right away. I only have one open order right now that I'm working on, so it is a good time to delve into a new project. So are we thinking like room for three tanks for now? I can start without it, but it is good to have an example on hand to make sure it sits correctly.Yeah the attachment nub at the bottom to balance is prob important.
See this ebay jawn:
http://www.ebay.com/itm/like/252174952026?ul_noapp=true&chn=ps&lpid=82
And this:
http://www.ebay.com/itm/like/391208171301?ul_noapp=true&chn=ps&lpid=82
And plenty of others I found but hate.
C'mon inanis!
And who has more dimensions or an extra tank they can ship her?
I'll send her a tank later this week (probably tomorrow). We're both in the same state atm, so it shouldn't take too long.
You's the best my east coast brother. I can work on it right away. I only have one open order right now that I'm working on, so it is a good time to delve into a new project. So are we thinking like room for three tanks for now? I can start without it, but it is good to have an example on hand to make sure it sits correctly.Yeah the attachment nub at the bottom to balance is prob important.
See this ebay jawn:
http://www.ebay.com/itm/like/252174952026?ul_noapp=true&chn=ps&lpid=82
And this:
http://www.ebay.com/itm/like/391208171301?ul_noapp=true&chn=ps&lpid=82
And plenty of others I found but hate.
C'mon inanis!
And who has more dimensions or an extra tank they can ship her?
I'll send her a tank later this week (probably tomorrow). We're both in the same state atm, so it shouldn't take too long.
If this is too OT for this thread I apologize, you can always move it to my thread over in the artisan section.
You's the best my east coast brother. I can work on it right away. I only have one open order right now that I'm working on, so it is a good time to delve into a new project. So are we thinking like room for three tanks for now? I can start without it, but it is good to have an example on hand to make sure it sits correctly.
If this is too OT for this thread I apologize, you can always move it to my thread over in the artisan section.
3 in a line or possibly 3x2 would be a pretty good start.
Do any Canadians have a suggestion for a site that sells good liquid AND coils for a subtank mini? I'm looking to change my liquids up a bit, but I'm not too sure on a good vendor to go with. It would be best if they also sell coils, because I don't want to pay for shipping twice. :))
Do any Canadians have a suggestion for a site that sells good liquid AND coils for a subtank mini? I'm looking to change my liquids up a bit, but I'm not too sure on a good vendor to go with. It would be best if they also sell coils, because I don't want to pay for shipping twice. :))
Do any Canadians have a suggestion for a site that sells good liquid AND coils for a subtank mini? I'm looking to change my liquids up a bit, but I'm not too sure on a good vendor to go with. It would be best if they also sell coils, because I don't want to pay for shipping twice. :))
mechsauce.com is my preferred juice vendor. They're flavors are amazing, wide selection, and prices are good.
I don't know about coils. Since I use an RDA I always build my own.
Do any Canadians have a suggestion for a site that sells good liquid AND coils for a subtank mini? I'm looking to change my liquids up a bit, but I'm not too sure on a good vendor to go with. It would be best if they also sell coils, because I don't want to pay for shipping twice. :))
mechsauce.com is my preferred juice vendor. They're flavors are amazing, wide selection, and prices are good.
I don't know about coils. Since I use an RDA I always build my own.
Wow. mechsauce.com is CHEAP. How the hell do they stay afloat?
You could always make your own. Here's mineShow Image(http://i.imgur.com/yHOuEPI.jpg)
You rock. They seem to make flavors very similar to the ones local to me. For as cheap as mechsauce is, I'm down to test. ROFLZ at my town vape store charging $15 for 15ml of **** they make.
If I get a tfv4 mini as a 2nd tank which coils should I go for? Too many ****ing options. I know I don't want nickel because I have a bunch for my crown.
In other news, I have a Tuglyfe box, an aelous v2 clone, some 20 & 26 awg kanthal (Clapton coils anyone?), ceramic tweezers, an ohm tester and some cottonman angel hair cotton on the way.dude how dope is the flavor on the aeolus tobeco clone I got that last week and I'm loving it (tobeco actually fixed all the problems of the authentic version) also just ordered a SMPL mechanical clone by wotofo and got the wismec noisy cricket to try my first series box (it was cheap so **** it) now let's hope I don't lose fingers to an unfortunate venting accident haha
Then next week I will have a bunch of DIY juice supplys on the way.
dude how dope is the flavor on the aeolus tobeco clone I got that last week and I'm loving it (tobeco actually fixed all the problems of the authentic version) also just ordered a SMPL mechanical clone by wotofo and got the wismec noisy cricket to try my first series box (it was cheap so **** it) now let's hope I don't lose fingers to an unfortunate venting accident haha
If I get a tfv4 mini as a 2nd tank which coils should I go for? Too many ****ing options. I know I don't want nickel because I have a bunch for my crown.
If I get a tfv4 mini as a 2nd tank which coils should I go for? Too many ****ing options. I know I don't want nickel because I have a bunch for my crown.
To use the Temp Control features, you need to use either the NI or TI coils.
But if your interested in trying the power control features, the S6 looks the most interesting.
If I get a tfv4 mini as a 2nd tank which coils should I go for? Too many ****ing options. I know I don't want nickel because I have a bunch for my crown.
SS, clapton and tri coils.If I get a tfv4 mini as a 2nd tank which coils should I go for? Too many ****ing options. I know I don't want nickel because I have a bunch for my crown.
To use the Temp Control features, you need to use either the NI or TI coils.
But if your interested in trying the power control features, the S6 looks the most interesting.
The problem with the s6 is they burn out quick because of how they're assembled.
Oh and they just added more coils for the tfv4 line. 8core, triple clapton rba (so I guess just triple rba), and quad clapton (similar to the tri coils they released with). So uh, try those too?
Also, reauleaux might be end game for me. The dna, at least mentally feels more accurate for tc, but they're both solid on battery life and power mode. Now to find a skin for the dna that doesn't look like ass
Going on 3 days pushing 80 watts and I'm about halfway or a little less battery charge with lg hg2s....
I am veeeeeeerrrryyy impressed I just started wrapping my own clapton using different wire for the core but my favorite so far has been with a nichrome and also tried a stainless steel core as it's allowing me to use temp control with my claptons and the flavor has been pretty insane
Going on 3 days pushing 80 watts and I'm about halfway or a little less battery charge with lg hg2s....
I am veeeeeeerrrryyy impressed I just started wrapping my own clapton using different wire for the core but my favorite so far has been with a nichrome and also tried a stainless steel core as it's allowing me to use temp control with my claptons and the flavor has been pretty insane
wow thanks for the info, gonna have to put that on my xmas list. my sigelei 150tc lasts me all day if i baby it. If i could chain vape and get a full days worth of charge out of the reux, worth it
sure tj haha I tell myself that all the time.....I'm really looking forward to the vapeston ceramikas anyone take a look at that yet?Going on 3 days pushing 80 watts and I'm about halfway or a little less battery charge with lg hg2s....
I am veeeeeeerrrryyy impressed I just started wrapping my own clapton using different wire for the core but my favorite so far has been with a nichrome and also tried a stainless steel core as it's allowing me to use temp control with my claptons and the flavor has been pretty insane
wow thanks for the info, gonna have to put that on my xmas list. my sigelei 150tc lasts me all day if i baby it. If i could chain vape and get a full days worth of charge out of the reux, worth it
I get ~2 days of vaping at 80w chaining the crap out of it. It's almost constantly in my hand, unless I'm typing or soldering. I'm done looking at stuff once I try the new herakles plus tank that everyone loves.
sure tj haha I tell myself that all the time.....I'm really looking forward to the vapeston ceramikas anyone take a look at that yet?Going on 3 days pushing 80 watts and I'm about halfway or a little less battery charge with lg hg2s....
I am veeeeeeerrrryyy impressed I just started wrapping my own clapton using different wire for the core but my favorite so far has been with a nichrome and also tried a stainless steel core as it's allowing me to use temp control with my claptons and the flavor has been pretty insane
wow thanks for the info, gonna have to put that on my xmas list. my sigelei 150tc lasts me all day if i baby it. If i could chain vape and get a full days worth of charge out of the reux, worth it
I get ~2 days of vaping at 80w chaining the crap out of it. It's almost constantly in my hand, unless I'm typing or soldering. I'm done looking at stuff once I try the new herakles plus tank that everyone loves.
Do any Canadians have a suggestion for a site that sells good liquid AND coils for a subtank mini? I'm looking to change my liquids up a bit, but I'm not too sure on a good vendor to go with. It would be best if they also sell coils, because I don't want to pay for shipping twice. :))
Where in BC you located? Any local vape shops? Best advice I got was to go to every vape shop in a 20 mile radius and try ****.
In other news, I've been having a bad experience with my tank. Has anyone else had any problems with the Kanger Subtank Mini? I've been repeatedly burning coils no matter what I do.. I've been priming, and dropping liquid onto the coil before I install it. It even burns at minimum power. I can't get a coil to last longer than two days, no matter what I do. I've been looking at other sub-ohm tanks, but there aren't many that fit into my batteries power range (30w max). I'm tempted to buy another Subtank but I don't want to end up with another tank that does this. I've been smoking cigarettes again for the last month or so because I can't get the tank working properly. I really loved this tank when it was working properly though..
Does anyone have any suggestions for a new sub-ohm tank? I've never tried building coils before. The only other option seems like the Aspire Atlantis.
I just saw a thread about this on Reddit same exact problem meow..... Have you tried inserting a needle through the wicking holez to create a little channel in your coils cotton? Another very common occurrence is people drilling out there sub tanks to increase channel size. So either way you should be getting at least a week out of your coils....Do any Canadians have a suggestion for a site that sells good liquid AND coils for a subtank mini? I'm looking to change my liquids up a bit, but I'm not too sure on a good vendor to go with. It would be best if they also sell coils, because I don't want to pay for shipping twice. :))
Where in BC you located? Any local vape shops? Best advice I got was to go to every vape shop in a 20 mile radius and try ****.
I live in the Okanagan, Penticton to be exact. There are no vape shops in my town yet. There's a hemp shop that sells liquid but they don't have any 100% VG liquids, and high PG sucks in sub-ohm tanks in my experience. They also carry only crap tanks and batteries, and no coils - they told me everyone usually just buys another tank when the coil goes. :))
There should be an Atomic Vapor shop here in a couple months. Mechsauce looks cool, but I don't know if they will work for me since they're based in the US. I've heard it's difficult to get nicotine liquids across the border, a lot of people say they get turned back at customs.
In other news, I've been having a bad experience with my tank. Has anyone else had any problems with the Kanger Subtank Mini? I've been repeatedly burning coils no matter what I do.. I've been priming, and dropping liquid onto the coil before I install it. It even burns at minimum power. I can't get a coil to last longer than two days, no matter what I do. I've been looking at other sub-ohm tanks, but there aren't many that fit into my batteries power range (30w max). I'm tempted to buy another Subtank but I don't want to end up with another tank that does this. I've been smoking cigarettes again for the last month or so because I can't get the tank working properly. I really loved this tank when it was working properly though..
Does anyone have any suggestions for a new sub-ohm tank? I've never tried building coils before. The only other option seems like the Aspire Atlantis.
Do any Canadians have a suggestion for a site that sells good liquid AND coils for a subtank mini? I'm looking to change my liquids up a bit, but I'm not too sure on a good vendor to go with. It would be best if they also sell coils, because I don't want to pay for shipping twice. :))
Where in BC you located? Any local vape shops? Best advice I got was to go to every vape shop in a 20 mile radius and try ****.
I live in the Okanagan, Penticton to be exact. There are no vape shops in my town yet. There's a hemp shop that sells liquid but they don't have any 100% VG liquids, and high PG sucks in sub-ohm tanks in my experience. They also carry only crap tanks and batteries, and no coils - they told me everyone usually just buys another tank when the coil goes. :))
There should be an Atomic Vapor shop here in a couple months. Mechsauce looks cool, but I don't know if they will work for me since they're based in the US. I've heard it's difficult to get nicotine liquids across the border, a lot of people say they get turned back at customs.
In other news, I've been having a bad experience with my tank. Has anyone else had any problems with the Kanger Subtank Mini? I've been repeatedly burning coils no matter what I do.. I've been priming, and dropping liquid onto the coil before I install it. It even burns at minimum power. I can't get a coil to last longer than two days, no matter what I do. I've been looking at other sub-ohm tanks, but there aren't many that fit into my batteries power range (30w max). I'm tempted to buy another Subtank but I don't want to end up with another tank that does this. I've been smoking cigarettes again for the last month or so because I can't get the tank working properly. I really loved this tank when it was working properly though..
Does anyone have any suggestions for a new sub-ohm tank? I've never tried building coils before. The only other option seems like the Aspire Atlantis.
In other news, I've been having a bad experience with my tank. Has anyone else had any problems with the Kanger Subtank Mini? I've been repeatedly burning coils no matter what I do.. I've been priming, and dropping liquid onto the coil before I install it. It even burns at minimum power. I can't get a coil to last longer than two days, no matter what I do. I've been looking at other sub-ohm tanks, but there aren't many that fit into my batteries power range (30w max). I'm tempted to buy another Subtank but I don't want to end up with another tank that does this. I've been smoking cigarettes again for the last month or so because I can't get the tank working properly. I really loved this tank when it was working properly though..
Does anyone have any suggestions for a new sub-ohm tank? I've never tried building coils before. The only other option seems like the Aspire Atlantis.
My buddy has the Atlantis v2 and loves it. He's used it both without and with TC, and won't stop singing it's praises.
I've a Subtank Mini, and haven't had any issues with burning coils, however same previously mentioned buddy had a Subtank Mega and was constantly burning through coils. I'm usually running the .5ohm coils @ 40W and it hits really solid, no spitting or dry hits.
What ohm coils are you going with? Have you tried the new style coils yet? How many watts are you pushing? I usually make sure that I prime them with a decent amount of liquid, maybe try more?
I just saw a thread about this on Reddit same exact problem meow..... Have you tried inserting a needle through the wicking holez to create a little channel in your coils cotton? Another very common occurrence is people drilling out there sub tanks to increase channel size. So either way you should be getting at least a week out of your coils....Do any Canadians have a suggestion for a site that sells good liquid AND coils for a subtank mini? I'm looking to change my liquids up a bit, but I'm not too sure on a good vendor to go with. It would be best if they also sell coils, because I don't want to pay for shipping twice. :))
Where in BC you located? Any local vape shops? Best advice I got was to go to every vape shop in a 20 mile radius and try ****.
I live in the Okanagan, Penticton to be exact. There are no vape shops in my town yet. There's a hemp shop that sells liquid but they don't have any 100% VG liquids, and high PG sucks in sub-ohm tanks in my experience. They also carry only crap tanks and batteries, and no coils - they told me everyone usually just buys another tank when the coil goes. :))
There should be an Atomic Vapor shop here in a couple months. Mechsauce looks cool, but I don't know if they will work for me since they're based in the US. I've heard it's difficult to get nicotine liquids across the border, a lot of people say they get turned back at customs.
In other news, I've been having a bad experience with my tank. Has anyone else had any problems with the Kanger Subtank Mini? I've been repeatedly burning coils no matter what I do.. I've been priming, and dropping liquid onto the coil before I install it. It even burns at minimum power. I can't get a coil to last longer than two days, no matter what I do. I've been looking at other sub-ohm tanks, but there aren't many that fit into my batteries power range (30w max). I'm tempted to buy another Subtank but I don't want to end up with another tank that does this. I've been smoking cigarettes again for the last month or so because I can't get the tank working properly. I really loved this tank when it was working properly though..
Does anyone have any suggestions for a new sub-ohm tank? I've never tried building coils before. The only other option seems like the Aspire Atlantis.
Do any Canadians have a suggestion for a site that sells good liquid AND coils for a subtank mini? I'm looking to change my liquids up a bit, but I'm not too sure on a good vendor to go with. It would be best if they also sell coils, because I don't want to pay for shipping twice. :))
Where in BC you located? Any local vape shops? Best advice I got was to go to every vape shop in a 20 mile radius and try ****.
I live in the Okanagan, Penticton to be exact. There are no vape shops in my town yet. There's a hemp shop that sells liquid but they don't have any 100% VG liquids, and high PG sucks in sub-ohm tanks in my experience. They also carry only crap tanks and batteries, and no coils - they told me everyone usually just buys another tank when the coil goes. :))
There should be an Atomic Vapor shop here in a couple months. Mechsauce looks cool, but I don't know if they will work for me since they're based in the US. I've heard it's difficult to get nicotine liquids across the border, a lot of people say they get turned back at customs.
In other news, I've been having a bad experience with my tank. Has anyone else had any problems with the Kanger Subtank Mini? I've been repeatedly burning coils no matter what I do.. I've been priming, and dropping liquid onto the coil before I install it. It even burns at minimum power. I can't get a coil to last longer than two days, no matter what I do. I've been looking at other sub-ohm tanks, but there aren't many that fit into my batteries power range (30w max). I'm tempted to buy another Subtank but I don't want to end up with another tank that does this. I've been smoking cigarettes again for the last month or so because I can't get the tank working properly. I really loved this tank when it was working properly though..
Does anyone have any suggestions for a new sub-ohm tank? I've never tried building coils before. The only other option seems like the Aspire Atlantis.
A few pages back when i first started vaping i got a subtank and had this same problem. I could NOT get my subtank to work right, always burning cotton hits, sputtering and popping all the time, etc. I called up the place i bought it from and they refunded me and made it sound like a common problem.
Hmmm... why are the reauleaux you guys linking $150-200 and the rx200 is $50?one uses the DNA chip and the other uses a joyetech chip. The DNA is a very cool chip just not 100$ worth cooler Imo ....I have the rx200($40 shipped on BF) and with the newest firmware has been quite amazing !!!
Quote from: absyrd :link=topic=42022.msg1964437#msg1964437 date=1449948423Hmmm... why are the reauleaux you guys linking $150-200 and the rx200 is $50?one uses the DNA chip and the other uses a joyetech chip. The DNA is a very cool chip just not 100$ worth cooler Imo ....I have the rx200($40 shipped on BF) and with the newest firmware has been quite amazing !!!
Quote from: absyrd :link=topic=42022.msg1964437#msg1964437 date=1449948423Hmmm... why are the reauleaux you guys linking $150-200 and the rx200 is $50?one uses the DNA chip and the other uses a joyetech chip. The DNA is a very cool chip just not 100$ worth cooler Imo ....I have the rx200($40 shipped on BF) and with the newest firmware has been quite amazing !!!
Anyone else have weird 510 issues with a tugbox? Sometimes mine doesn't fire, I found the issue and fixed it but I still didn't think the authentic would have any issues.
Anyone else have weird 510 issues with a tugbox? Sometimes mine doesn't fire, I found the issue and fixed it but I still didn't think the authentic would have any issues.
Funny you say that, my tugbox clone has the same issue and I have found taking off the rda and putting it back on fixes the issue, but when I looked closely I can't seem to find the cause for it. It's a very simple circuit. One theory is that some e liquid gets caught between the center screw and spring loaded 510 post and causes a gap thus breaking the electrical connection. This is somewhat likely as there is movement due to being spring loaded and VG is a very thick juice. I will make some grooves on the surface of the 510 to try to allow for juice to move out of the way (similar to the way tires have tread to allow water to move out of the way to stop a layer from forming and maintain grip) and maybe increase the pressure of the spring.
Anyone else have weird 510 issues with a tugbox? Sometimes mine doesn't fire, I found the issue and fixed it but I still didn't think the authentic would have any issues.
Funny you say that, my tugbox clone has the same issue and I have found taking off the rda and putting it back on fixes the issue, but when I looked closely I can't seem to find the cause for it. It's a very simple circuit. One theory is that some e liquid gets caught between the center screw and spring loaded 510 post and causes a gap thus breaking the electrical connection. This is somewhat likely as there is movement due to being spring loaded and VG is a very thick juice. I will make some grooves on the surface of the 510 to try to allow for juice to move out of the way (similar to the way tires have tread to allow water to move out of the way to stop a layer from forming and maintain grip) and maybe increase the pressure of the spring.
I actually know what the issue is and how to fix it, give me a bit to take some pictures. :thumb:
Tugbox 510 Spring Pin Issue
Sorry for the vertical picture, it was easier to hold my phone like that. :pMore
If you look at the red wire and follow it to the bottom of the 510 connector you'll see it attaches to a small pin that is seated a tube, this is the spring loaded part of the 510 that makes contact with the bottom of your RDA/RTA/tank/whatever. From what I've seen after playing with it the small pin attached to the red wire is a bit too small, leading to a bad connection. The solution is moving the red wire around until it forces the small pin to bind in the tube, this has no affect on the adjustability of the 510 and it still works with all my RDAs.
(Attachment Link)
^ ****ty diagram of what I'm saying.
Anyone else have weird 510 issues with a tugbox? Sometimes mine doesn't fire, I found the issue and fixed it but I still didn't think the authentic would have any issues.
Funny you say that, my tugbox clone has the same issue and I have found taking off the rda and putting it back on fixes the issue, but when I looked closely I can't seem to find the cause for it. It's a very simple circuit. One theory is that some e liquid gets caught between the center screw and spring loaded 510 post and causes a gap thus breaking the electrical connection. This is somewhat likely as there is movement due to being spring loaded and VG is a very thick juice. I will make some grooves on the surface of the 510 to try to allow for juice to move out of the way (similar to the way tires have tread to allow water to move out of the way to stop a layer from forming and maintain grip) and maybe increase the pressure of the spring.
In other news I ordered some milk man juice to see what all the fuss is about. And Black 'n' Blue from T Juice is amazing. I mixed it with some 100% VG and nicotine and let it seep for 2 weeks and the flavour is amazing.
I need to get a 200 watt VW/TC mod but I can't seem to decide on one. Anyone have any suggestions? I don't want to go spending to over the top
Anyone else have weird 510 issues with a tugbox? Sometimes mine doesn't fire, I found the issue and fixed it but I still didn't think the authentic would have any issues.
Funny you say that, my tugbox clone has the same issue and I have found taking off the rda and putting it back on fixes the issue, but when I looked closely I can't seem to find the cause for it. It's a very simple circuit. One theory is that some e liquid gets caught between the center screw and spring loaded 510 post and causes a gap thus breaking the electrical connection. This is somewhat likely as there is movement due to being spring loaded and VG is a very thick juice. I will make some grooves on the surface of the 510 to try to allow for juice to move out of the way (similar to the way tires have tread to allow water to move out of the way to stop a layer from forming and maintain grip) and maybe increase the pressure of the spring.
In other news I ordered some milk man juice to see what all the fuss is about. And Black 'n' Blue from T Juice is amazing. I mixed it with some 100% VG and nicotine and let it seep for 2 weeks and the flavour is amazing.
I need to get a 200 watt VW/TC mod but I can't seem to decide on one. Anyone have any suggestions? I don't want to go spending to over the top
Depending on your budget:
reauleaux rx200 - $60
reauleaux dna200 - $160
Anyone else have weird 510 issues with a tugbox? Sometimes mine doesn't fire, I found the issue and fixed it but I still didn't think the authentic would have any issues.
Funny you say that, my tugbox clone has the same issue and I have found taking off the rda and putting it back on fixes the issue, but when I looked closely I can't seem to find the cause for it. It's a very simple circuit. One theory is that some e liquid gets caught between the center screw and spring loaded 510 post and causes a gap thus breaking the electrical connection. This is somewhat likely as there is movement due to being spring loaded and VG is a very thick juice. I will make some grooves on the surface of the 510 to try to allow for juice to move out of the way (similar to the way tires have tread to allow water to move out of the way to stop a layer from forming and maintain grip) and maybe increase the pressure of the spring.
In other news I ordered some milk man juice to see what all the fuss is about. And Black 'n' Blue from T Juice is amazing. I mixed it with some 100% VG and nicotine and let it seep for 2 weeks and the flavour is amazing.
I need to get a 200 watt VW/TC mod but I can't seem to decide on one. Anyone have any suggestions? I don't want to go spending to over the top
Depending on your budget:
reauleaux rx200 - $60
reauleaux dna200 - $160
Cheers dude, I think I will go with the RX200.
I just cooked up a 90 dollar order on fasttech... More batteries. Wires, heaps of cotton, and rx200. It's gonna be good but I will have to be patient
Anyone else have weird 510 issues with a tugbox? Sometimes mine doesn't fire, I found the issue and fixed it but I still didn't think the authentic would have any issues.
Funny you say that, my tugbox clone has the same issue and I have found taking off the rda and putting it back on fixes the issue, but when I looked closely I can't seem to find the cause for it. It's a very simple circuit. One theory is that some e liquid gets caught between the center screw and spring loaded 510 post and causes a gap thus breaking the electrical connection. This is somewhat likely as there is movement due to being spring loaded and VG is a very thick juice. I will make some grooves on the surface of the 510 to try to allow for juice to move out of the way (similar to the way tires have tread to allow water to move out of the way to stop a layer from forming and maintain grip) and maybe increase the pressure of the spring.
In other news I ordered some milk man juice to see what all the fuss is about. And Black 'n' Blue from T Juice is amazing. I mixed it with some 100% VG and nicotine and let it seep for 2 weeks and the flavour is amazing.
I need to get a 200 watt VW/TC mod but I can't seem to decide on one. Anyone have any suggestions? I don't want to go spending to over the top
Depending on your budget:
reauleaux rx200 - $60
reauleaux dna200 - $160
Cheers dude, I think I will go with the RX200.
I just cooked up a 90 dollar order on fasttech... More batteries. Wires, heaps of cotton, and rx200. It's gonna be good but I will have to be patient
Which batteries?
Also, you might have been able to spend about the same amount and get it all a lot sooner going through something like vapenw.com depending on how much cotton/wire/batteries you got.
anyone bought steep popdeez online? any reputable online shops that's selling it for a good price?
I'm based in Malaysia and I've been looking for popdeez for a long time and it's always sold out. Decided to order it soon.
Tried Charlie's Chalk Dust (Dream cream) and it was darn good.
anyone bought steep popdeez online? any reputable online shops that's selling it for a good price?
I'm based in Malaysia and I've been looking for popdeez for a long time and it's always sold out. Decided to order it soon.
Tried Charlie's Chalk Dust (Dream cream) and it was darn good.
Dream Cream made me want to barf. Anything cream, milk just tastes sour and awful to me.
I guess. I think I've like the acidic stuff the most like the 2 lemonades I've tried. And I like subtle mint.
I'm going to experiment with a bunch more mechsauce because it is SO cheap to test.
anyone bought steep popdeez online? any reputable online shops that's selling it for a good price?
I'm based in Malaysia and I've been looking for popdeez for a long time and it's always sold out. Decided to order it soon.
Tried Charlie's Chalk Dust (Dream cream) and it was darn good.
Dream Cream made me want to barf. Anything cream, milk just tastes sour and awful to me.
I am getting it shipped to australia and that website said they don't ship there unfortunately. But you can pay a little extra on fasttech to significantly improve the speed. I am getting LG 18650 batteries. 3000mah ones
How strong is the metal taste when your coils start going?
anyone bought steep popdeez online? any reputable online shops that's selling it for a good price?
I'm based in Malaysia and I've been looking for popdeez for a long time and it's always sold out. Decided to order it soon.
Tried Charlie's Chalk Dust (Dream cream) and it was darn good.
Dream Cream made me want to barf. Anything cream, milk just tastes sour and awful to me.
I hated all the CCD I tried recently. It all tasted similar and kinda bland.
I am getting it shipped to australia and that website said they don't ship there unfortunately. But you can pay a little extra on fasttech to significantly improve the speed. I am getting LG 18650 batteries. 3000mah ones
Ah. Also, great choice on batteries.
How strong is the metal taste when your coils start going?
hmm, pretty subjective i guess. I don't really taste them. maybe because i change my coils every two days
How strong is the metal taste when your coils start going?
hmm, pretty subjective i guess. I don't really taste them. maybe because i change my coils every two days
You build your own? Otherwise sounds mad expensive haha.
OCC for uwell?
didn't know that there's a tfv4 mini. the original tfv4 mini is nice though
market's too saturated with subohm tanks now. don't know which one to choose, if i want one
http://houseofvape.com.au/vape/accessories/ez-dripper-by-ez-cloud-company/
So this is a thing
http://houseofvape.com.au/vape/accessories/ez-dripper-by-ez-cloud-company/
So this is a thing
I made it about 30 secs into that video before I wanted to shoot myself.if you do decide to use the rba on the tvf4 (i use it because a it is cheaper to make your own coils and b I'm running the stock Clapton it came with .6 ohms at 32 watts and my battery is lasting 2 days and it is sipping juice instead of guzzling and it is still chucking like a champ 8)
Thanktanks.
tfv4 will be here today. :thumb:
I made it about 30 secs into that video before I wanted to shoot myself.if you do decide to use the rba on the tvf4 (i use it because a it is cheaper to make your own coils and b I'm running the stock Clapton it came with .6 ohms at 32 watts and my battery is lasting 2 days and it is sipping juice instead of guzzling and it is still chucking like a champ 8)
Thanktanks.
tfv4 will be here today. :thumb:
Rofl I'm just trying to picture your face absyrd when you see the size of the coils it uses oh Jesus they are obscenely large
I made it about 30 secs into that video before I wanted to shoot myself.if you do decide to use the rba on the tvf4 (i use it because a it is cheaper to make your own coils and b I'm running the stock Clapton it came with .6 ohms at 32 watts and my battery is lasting 2 days and it is sipping juice instead of guzzling and it is still chucking like a champ 8)
Thanktanks.
tfv4 will be here today. :thumb:
Rofl I'm just trying to picture your face absyrd when you see the size of the coils it uses oh Jesus they are obscenely large
Oh god they are large. And they guzzle juice like mad. I'm using the dual Clapton cool currently. I tried building the rba and did something wrong because I burned cotton like a mad man.
This thing gets ****ing HOT even at 30W. Perhaps I have to TC this bad boy.
This thing gets ****ing HOT even at 30W. Perhaps I have to TC this bad boy.
This thing gets ****ing HOT even at 30W. Perhaps I have to TC this bad boy.
I've been using mine at 50w. It does get pretty warm but it's rated for up to 100 I believe.
Here is a fool proof easy way to wick your smok rba and no burnt hits or leaking it works freaking amazing
http://vapingunderground.com/threads/smok-tfv4-tank-review-and-how-to-wick-rba-for-no-dry-hits.158263/
This thing gets ****ing HOT even at 30W. Perhaps I have to TC this bad boy.
I've been using mine at 50w. It does get pretty warm but it's rated for up to 100 I believe.
Trying 50W and this thing is drinking juice and making me cough like a mofo. No clue what I'm doing wrong.
This thing gets ****ing HOT even at 30W. Perhaps I have to TC this bad boy.
I've been using mine at 50w. It does get pretty warm but it's rated for up to 100 I believe.
Trying 50W and this thing is drinking juice and making me cough like a mofo. No clue what I'm doing wrong.Here is a fool proof easy way to wick your smok rba and no burnt hits or leaking it works freaking amazing
http://vapingunderground.com/threads/smok-tfv4-tank-review-and-how-to-wick-rba-for-no-dry-hits.158263/
Will watch this in full before the game tonight. Thanks, sed8!
I think I just didn't prime the coil/cotton for long enough. Walked away from it for 30 mins and it is fine now. Still like my crown better for the time being.
Prob gonna try the triple coil next:
https://www.elementvape.com/smok-tfv4-replacement-triple-coil-0-2ohm-pack-of-5
EDIT: Already through half a tank of juice. Jebus ****ing christ. Good thing for mechsauce.
I think I just didn't prime the coil/cotton for long enough. Walked away from it for 30 mins and it is fine now. Still like my crown better for the time being.
Prob gonna try the triple coil next:
https://www.elementvape.com/smok-tfv4-replacement-triple-coil-0-2ohm-pack-of-5
EDIT: Already through half a tank of juice. Jebus ****ing christ. Good thing for mechsauce.
Triple coil best coil for tfv4 that I've tried. But crown is still better and herakles plus might be better than that.
Triple coil best coil for tfv4 that I've tried. But crown is still better and herakles plus might be better than that.
Word. I just wanted a 2nd tank so I can switch between juices on the fly. Also wanted to try something new for $25.
I just read two reviews that said 70W is the best for this pre-installed coil. I feel like its gonna melt my face off haha.
Yep. The .35ohm TF-CLP2 that comes pre-installed. I'm ripping it at 70 right now and actually getting clouds. Chain-vaping is getting hot af, though. Man this is enjoyable. I don't know what kind of damage I'm doing to myself, but it can't be worse than cigs, right? :p
Just turnt down to 60. Still fine. 40 sucked ****.
Flavor differences are crazy with diff coils and cotton.
Also, hate "new coil" flav. I'm puffing away to get rid of it. Haha.
took my tvf4 to work because everyone talking about them hitting the rba deck single clapton.59 33 watts chain pulling on my break....it looks and feels just like the clouds I rip At lower resistances and higher watts .... Taste amazing !!! If you can get your rba deck to work properly it's actually quite amazingJust turnt down to 60. Still fine. 40 sucked ****.
Flavor differences are crazy with diff coils and cotton.
Also, hate "new coil" flav. I'm puffing away to get rid of it. Haha.
Yay, time to max out my mods potential!
New coils definitely need to be broken in.
I can't chain pull on it. It gets too hot. Will try the rba single clapton after I wear this coil down.well let me throw a tad in the sampler I'm sending also sorry about slacking I have been waiting on something . the deadly sin is a sweet very smooth tobaco but it's definitely not for everyone. On another note I almost have it away because when I first got it I couldn't even vape it haha after 2 weeks of steepi g it's my favorite juice. The whole steeping deal is definitely not a myth
Will try the deadly sin. Cheap enough to be worth a test. Thanks for recommendation.
Don't apologize. I can wait for my surprise package. <3
Going to try steeping a 30ml bottle vs just puffing it straight away. Also going to try a 6-12 hour "breathing" test.
damn you sed8 and TJShow Image(http://i.imgur.com/ajLyr6P.jpg)
damn you sed8 and TJShow Image(http://i.imgur.com/ajLyr6P.jpg)
Nice. I just got a sapor and an origen v2 clone today and a dna200 w/ LG HG2s on black friday. busy as **** this week though so no time to build
damn you sed8 and TJShow Image(http://i.imgur.com/ajLyr6P.jpg)
Nice. I just got a sapor and an origen v2 clone today and a dna200 w/ LG HG2s on black friday. busy as **** this week though so no time to build
a mod that vapes...
you just edged out hoffman
Gotcha.
And that blows they have to shut down their online biz.
Will go to vape shop today with a cup of coffee and try some tobacoo and nutty flavors.
EDIT: Also not liking this tfv4. Anyone want it for free (CONUS)? Sed8 since you sending me crown coils?
Really wishing I had gotten one of those realeuax's. My evic doesn't have enough power and I'm still experimenting with getting the tug box running properly.
Really wishing I had gotten one of those realeuax's. My evic doesn't have enough power and I'm still experimenting with getting the tug box running properly.
So get one. Just because you don't already have one doesn't mean you missed out on the fun.
Really wishing I had gotten one of those realeuax's. My evic doesn't have enough power and I'm still experimenting with getting the tug box running properly.
So get one. Just because you don't already have one doesn't mean you missed out on the fun.
I only got it because it was $40 after using my points with elementvape. Seriously haven't seen the battery meter going down and I've been puffing hard since last night trying out juices by the 30ml bottle.
PS - I am getting all kinds of emails from juice places and **** asking me to call lawmakers to stop 40% taxes on vaping products. Time to jump into action!
I only got it because it was $40 after using my points with elementvape. Seriously haven't seen the battery meter going down and I've been puffing hard since last night trying out juices by the 30ml bottle.
PS - I am getting all kinds of emails from juice places and **** asking me to call lawmakers to stop 40% taxes on vaping products. Time to jump into action!
Oh good stuff! I could swing a rx200 for 40$
I only got it because it was $40 after using my points with elementvape. Seriously haven't seen the battery meter going down and I've been puffing hard since last night trying out juices by the 30ml bottle.
PS - I am getting all kinds of emails from juice places and **** asking me to call lawmakers to stop 40% taxes on vaping products. Time to jump into action!
Oh good stuff! I could swing a rx200 for 40$
Funny thing it is technically smaller than my sigelei. It is much shorter... same height as evic mini. It is just 1 battery wider and much heavier. It doesn't have the grippy case the sigelei has, though, and with the extra weight I almost dropped it a few times. I'd say I could fit it in about half of the pairs of pants/jeans I own without it being too tight to get out on the regular. Gonna try lugging it around NYC tomorrow.
Wyfe bought me the LGs for Chanukah. Other than nearly blowing my head off and searing my lungs earlier, I'm having a blast quitting smoking.
My breaf either smells like lemonade or mint. Another plus for when I get close to all the strippers.
So far I've managed to get 5 people to switch from ciggs to vapes, and all of them couldn't be happier.
absyrd, what flavor types do you normally go for?
So far I've managed to get 5 people to switch from ciggs to vapes, and all of them couldn't be happier.
absyrd, what flavor types do you normally go for?
Good on you for getting people away from the cancer sticks. I only wish I tried vaping years ago before quitting multiple times after buying chantix at $270 per pop.
I been trying every flavor I can from mechsauce. Some of the berries are just okay, but mostly gross. I think my taste buds are still ****ed up weeks later after smoking 10 cigs a day for a little while.
I really need a good tobacco, I think, for morning coffee.
Gotta be done soon testing as I think I'll just keep two crowns going at once: one with Vanill-O-Mint from Vapor Chef and one with Cosmic V from mechsauce. Such a shame about Mech Mint being way too ****ing minty as it is waaaaaaaaaaaay cheaper.
ahhh haha yours looks so much sexier then mine 8) sapor is such a great rda at first I was not impressed with it at all and then one day I accidently fired it about 20 watts higher then I normally do and it sprang to life ...dosent matter what type of coil set up I use it takes 10-30more watts in the sapor then in any other tank or rda with the exact same setup. It might have something to do with the top down airflow !!!
damn you sed8 and TJShow Image(http://i.imgur.com/ajLyr6P.jpg)
ok absyrd have you packed up with some good tobacco'sSo far I've managed to get 5 people to switch from ciggs to vapes, and all of them couldn't be happier.
absyrd, what flavor types do you normally go for?
Good on you for getting people away from the cancer sticks. I only wish I tried vaping years ago before quitting multiple times after buying chantix at $270 per pop.
I been trying every flavor I can from mechsauce. Some of the berries are just okay, but mostly gross. I think my taste buds are still ****ed up weeks later after smoking 10 cigs a day for a little while.
I really need a good tobacco, I think, for morning coffee.
Gotta be done soon testing as I think I'll just keep two crowns going at once: one with Vanill-O-Mint from Vapor Chef and one with Cosmic V from mechsauce. Such a shame about Mech Mint being way too ****ing minty as it is waaaaaaaaaaaay cheaper.
So far I've managed to get 5 people to switch from ciggs to vapes, and all of them couldn't be happier.
absyrd, what flavor types do you normally go for?
So far I've managed to get 5 people to switch from ciggs to vapes, and all of them couldn't be happier.
absyrd, what flavor types do you normally go for?
And I've gotten five vapers to start smoking! Muhahaha!!!
So far I've managed to get 5 people to switch from ciggs to vapes, and all of them couldn't be happier.
absyrd, what flavor types do you normally go for?
And I've gotten five vapers to start smoking! Muhahaha!!!
y u do dis /cry
Anyone know of a good coffee flavored juice that doesn't **** out a coil in a couple days or even hours?creamy Latte from blue dot vapers been vaping it for 4 days now in the morning and my coils look relatively ungunkified 8) tastes great and is amazingly affordable
Anyone know of a good coffee flavored juice that doesn't **** out a coil in a couple days or even hours?creamy Latte from blue dot vapers been vaping it for 4 days now in the morning and my coils look relatively ungunkified 8) tastes great and is amazingly affordable
Okay. Got my realeuax rx200. Just like sed8 said, in power mode this thing just barely eats battery. GREAT to have for all-around puffing all day.
I did NOT change the wattage on all the TC modes when I first got it. Today I accidentally pressed 3 times and it switched to 200W TC without me noticing... until I fired and it instantly burnt up my coil and cotton and throat and lungs. Hahahaha.
Also more mechsauce review:
"Antidote" - Disgusting. Supposed to be strawberry shortcake ice cream bar. Naaaasty.
"Berry Sabotage" - Again proves that I hate milk/cream flavors. Tastes just like described and it isn't a good vape flavor. Crunch berries sounded so enticing.
"Waterhog" - Good, not great. VERY light watermelon flavor.
"Cosmic V" is still my go-to from there so far.
Got my wismec/jaybo noisy cricket
Ok I don't know why this thing is not more popular I got it for $28 and it is freaking amazing 😱 it is my first series mech mod and it is out of control amazingly powerful and sexy af (not to mention tiny) I freaking love it
Testing independentvaporcompany because 30% off til tomorrow. Will do a flavor review when it gets here.vodka or running alcohol
Also... way to flush tank of a flavor that just doesn't want to come out?
Any suggestions for a sub ohm tank with decently priced TC coils to replace my Melo?
Any suggestions for a sub ohm tank with decently priced TC coils to replace my Melo?
Uwell Crown is the only tank I've really liked out of 3 so far. I've used the ni200 .15ohms, .25 ss and .5 ss.
I am noob, though.
vaping while I have stomach flu is awful, would not recommend
Any suggestions for a sub ohm tank with decently priced TC coils to replace my Melo?
Uwell Crown is the only tank I've really liked out of 3 so far. I've used the ni200 .15ohms, .25 ss and .5 ss.
I am noob, though.
Buddy just got the Uwell as well and he's loving it. Tried it myself and I was really pleased.
I've been running power mode at 40w on .5 and .25 ss coils. Also run 450F on both at 40w as well as the ni200. Nice and flavorful.don't forget the uwell crown has stainless steel coils which can be used in tc mode if your device supports SS TC ! It's the only form of tc I like and really kicks out the flavor compared to other vaping mediums I have tried (kanthal,nichrome,titanium nickel etc) ....8)
I've been running power mode at 40w on .5 and .25 ss coils. Also run 450F on both at 40w as well as the ni200. Nice and flavorful.don't forget the uwell crown has stainless steel coils which can be used in tc mode if your device supports SS TC ! It's the only form of tc I like and really kicks out the flavor compared to other vaping mediums I have tried (kanthal,nichrome,titanium nickel etc) ....8)
I've been running power mode at 40w on .5 and .25 ss coils. Also run 450F on both at 40w as well as the ni200. Nice and flavorful.don't forget the uwell crown has stainless steel coils which can be used in tc mode if your device supports SS TC ! It's the only form of tc I like and really kicks out the flavor compared to other vaping mediums I have tried (kanthal,nichrome,titanium nickel etc) ....8)
I have the istick 40 watt tc that only supports ni200 for tc.
I've been running power mode at 40w on .5 and .25 ss coils. Also run 450F on both at 40w as well as the ni200. Nice and flavorful.don't forget the uwell crown has stainless steel coils which can be used in tc mode if your device supports SS TC ! It's the only form of tc I like and really kicks out the flavor compared to other vaping mediums I have tried (kanthal,nichrome,titanium nickel etc) ....8)
I have the istick 40 watt tc that only supports ni200 for tc.
If only I hadn't just sold my evic mini...
Sorry, not going to give you the vaporshark dna200 I'm trying to sell, that's a little too generous for my blood.
Anyone know of a short stubby cylindrical (not a box! :D) mod that takes one of those half-height 18650 batteries? Or even a dual AA configuration?
Also I loved the haze dripper tank clone so much I saw this and impulse bought it because I love the tank below the deck with the vertical coil style "Genesis" rdtas
http://www.vapordna.com/ProductDetails.asp?ProductCode=HCFODI&Click=38
I think you guys have me sold on the crown, even more so now that I found out it comes in black.
I think I might be in the market for a new mod, and am looking for suggestions.
I do have a couple requirements and very important stats.
Battery life is the biggest consideration. Also temp control is a must for Ni200. Price needs to be under 100USD but would like to stay under 75. The one other requirement is no externally charged battery. I vape fairly often with it on the charger.
Some mods I have found that input would be great on is the following
Smok X M80 pro. Pros 4400mah battery with very reasonable price.
Joyetech eVic VT. Pros 5000mah battery, legit DNA chip probably find it for under 100
Are there any other mods that would fit my requirements, or should I pick one of these and run?
Yes I would entertain buying used from here provided it hasn't been used long due to non replaceable batteries.
I think you guys have me sold on the crown, even more so now that I found out it comes in black.
I think I might be in the market for a new mod, and am looking for suggestions.
I do have a couple requirements and very important stats.
Battery life is the biggest consideration. Also temp control is a must for Ni200. Price needs to be under 100USD but would like to stay under 75. The one other requirement is no externally charged battery. I vape fairly often with it on the charger.
Some mods I have found that input would be great on is the following
Smok X M80 pro. Pros 4400mah battery with very reasonable price.
Joyetech eVic VT. Pros 5000mah battery, legit DNA chip probably find it for under 100
Are there any other mods that would fit my requirements, or should I pick one of these and run?
Yes I would entertain buying used from here provided it hasn't been used long due to non replaceable batteries.
I currently have the eVic VT and its a great mod, the battery life is amazing in TC mode and still very good at high level VW mode. It also charges pretty quick even with the large battery.
The only issues I have with it are the 60w max power for VW mode, since ive been getting into RBAs and RDAs 60w just isnt enough. It also only supports NI & TI temp control so no SS coils sadly.
If your not a power chaser, then its definitely a great mod. I got mine for ~60$ including a eGo one MEGA tank whos titanium coils are great for TC.
Found a good way to fill my tanks by accident. Dunno how I missed it before. I'm really sick of accidentally squeezing **** down my air tube with the huge droppers and massive 120ml bottle tips.
http://thevaporchef.com/products/3ml-luer-lock-syringe-and-18g-blunt-applicator-tip
Thanks guys, I pulled the trigger for an evic VT in black with red and a crown in black. Both from vapordna.com. also picked up a few extra tc coils for it.
Thanks guys, I pulled the trigger for an evic VT in black with red and a crown in black. Both from vapordna.com. also picked up a few extra tc coils for it.
Nice! You will not be disappointed. I rarely get anywhere even near 60W, so that is a fine mod in my eyes.
(Attachment Link)
Got it running. Wife was complaing about the clouds driftig across the living room very shortly.
(Attachment Link)
Got it running. Wife was complaing about the clouds driftig across the living room very shortly.
Haha. My wyfe loves how the house smells like lemonade, berries, mint, etc. Doesn't mind the clouds at all.
How you like the crown?
And mechsauce.com messed up an order, so to make up for it they sent me 100ml of Cosmic V.
I went back to try some other stuff and got 5% off for being return customer. Orangesicle, key lime, and berries otw. Will review when they get here.
Will def let it steep. Thanks for advice.
Turns out I'm a complete citrus **** after trying independent vapor co's nillionaire grapefruit. Too expensive, though, so I opted to test mechsauce's other citrus type flavors.
So I tried one of the Ni200 coils in my Crown, and don't care for the flavor near as much as the stainless coils. I am using the eVic VT that maxes out at 60 watts. Which coils would you guy recommend. have yet to see Ti coils for the Crown as the mod supports TC with those, but yeah. Would I be ok running the .25 ohm coils or should I stick with the .5 ohm?
Anyone in here DIY juices and flavors?
Anyone in here DIY juices and flavors?
Making DIY juice is very much on my list, Just need to get a good set up going then I'm going to start investing into it.
Is this something that you do?
My lungs volunteer for gh juice testing. Get on it. ;D
Show Image(http://i.imgur.com/dbJ2LUw.jpg)
Whelp, game over for me boys
This mod has lasted me 3 days on a full charge,
No need to buy anything else it's perfect
DNA 200 can suck it
Show Image(http://i.imgur.com/dbJ2LUw.jpg)
Whelp, game over for me boys
This mod has lasted me 3 days on a full charge,
No need to buy anything else it's perfect
DNA 200 can suck it
I had both, I liked both, maybe even liked the dna a little more. But I kept the rx and sold the dna to pay for a hexohm to go with the kennedy 24 I bought with the money I get from my other dna200 mod for sale.
Show Image(http://i.imgur.com/dbJ2LUw.jpg)
Show Image(http://i.imgur.com/dbJ2LUw.jpg)
Whelp, game over for me boys
This mod has lasted me 3 days on a full charge,
No need to buy anything else it's perfect
DNA 200 can suck it
Anyone got suggestions for a tank upgrade from the Horizon Arctic? I love the thing but just trying to expand my horizons a little bit.
Anyone got suggestions for a tank upgrade from the Horizon Arctic? I love the thing but just trying to expand my horizons a little bit.
Uwell crown or Herakles seem to be the suggested tanks currently.
Show Image(http://i.imgur.com/dbJ2LUw.jpg)
Whelp, game over for me boys
This mod has lasted me 3 days on a full charge,
No need to buy anything else it's perfect
DNA 200 can suck it
I had both, I liked both, maybe even liked the dna a little more. But I kept the rx and sold the dna to pay for a hexohm to go with the kennedy 24 I bought with the money I get from my other dna200 mod for sale.
Duuuuude Kennedy 24mm is so good. Got it in brass for Xmas, part of my game over situation...
Airflow on it feels like it was made specifically for my lungs
Anyone ever order from https://www.mtbakervapor.com/ ?
I just ordered a bunch of flavors from them, great prices.
Anyone ever order from https://www.mtbakervapor.com/ ?
I just ordered a bunch of flavors from them, great prices.
Jumping out of a semi I was loading and guess what flies out of my pocket. Broke the glass on my subtank mini.
Anyone ever order from https://www.mtbakervapor.com/ ?
I just ordered a bunch of flavors from them, great prices.
Jumping out of a semi I was loading and guess what flies out of my pocket. Broke the glass on my subtank mini.
Noooooooooooo! Does it come with a back-up piece of glass?
Hey guys,
I was wondering whats good starting vape. Like whats a good box and juices to buy, I tried my friends vape a couple of times and found it quite enjoyable and would like to know whats good
Hey guys,
I was wondering whats good starting vape. Like whats a good box and juices to buy, I tried my friends vape a couple of times and found it quite enjoyable and would like to know whats good
You looking for portability? Battery life? Big tasty clouds? Budget?
Anyone ever order from https://www.mtbakervapor.com/ ?
I just ordered a bunch of flavors from them, great prices.
Hey guys,
I was wondering whats good starting vape. Like whats a good box and juices to buy, I tried my friends vape a couple of times and found it quite enjoyable and would like to know whats good
You looking for portability? Battery life? Big tasty clouds? Budget?
Gimme dat budget build first, if I really enjoy it i'll start investing
Hey guys,
I was wondering whats good starting vape. Like whats a good box and juices to buy, I tried my friends vape a couple of times and found it quite enjoyable and would like to know whats good
You looking for portability? Battery life? Big tasty clouds? Budget?
Gimme dat budget build first, if I really enjoy it i'll start investing
I started off with an evic mini and horizon Arctic tank. The stock one with the mini was terrible in my opinion. Even from a starters stand point it was junk.
Or, you could invest a smidge more (because batteries) and get something you can grow with and just buy a reauleaux rx200 for $40 and become one of us - http://vapenw.com/new-arrivals/reuleaux-rx200-by-wismec-jaybo-designs
Or, you could invest a smidge more (because batteries) and get something you can grow with and just buy a reauleaux rx200 for $40 and become one of us - http://vapenw.com/new-arrivals/reuleaux-rx200-by-wismec-jaybo-designs
ONE OF US!
And here is my final 400ml of 6mg. It is funny how 3 of the 4 smell exactly the same before steeping. Only the Cosmic V is really in its final form it seems.Show Image(http://i.imgur.com/sDPSEd7.jpg)
Onto 3mg after these are gone.
Show Image(http://i.imgur.com/fLGy7c5.jpg)
Some new flavors to me from the past 2 weeks
Anyone ever order from https://www.mtbakervapor.com/ ?
I just ordered a bunch of flavors from them, great prices.
Show Image(http://i.imgur.com/fLGy7c5.jpg)
Some new flavors to me from the past 2 weeks
How do you like the Mech Milk? I just ordered some of that and some medusa milk in 70/30 .3% for my crown.
Blue Dot vapor
Oasis vapor on %40off Tuesdays
Carpe Diem Vapor (there "slevin and "Double O slevin") are some of the best reviewed juices out there and super affordable
Also you guys heard of www.juicedb.com it's probably the best tool for finding good juice companies and deals on juice there is if you haven't used it you are missing out I Swear by it !!!!!!
What nic level are you running?
Hey guys, I need some help. I don't know what I'm ****ing up but I'm still burning coils within a few hours.. on my new tank, pretty much instantly. What do you guys generally do when you set up a new coil in a Subtank or Triton II, etc?
For my new Triton II, I've tried everything for priming. The last coil I basically flooded with priming, dripping a lot directly onto the coil and then leaving it to sit for ten minutes.. as soon as I vaped it enough that it was done flooding, it burnt. They burn whether I'm under the recommended wattage or not.. I started on 9w for a 1.8ohm Triton II coil, and it burnt anyway. I can't even slowly ramp up to the recommended wattage. :))
I have no coils left, but I will be picking some more up soon (probably the Ni200 Temp Control coils for the Triton II). Starting to feel like I have no other choice but to smoke cigarettes though. :blank:
My setup looks like this right now:
Vape 1. Subtank Mini with the newer model 1.2ohm coils, iTaste MVP3 30w
Vape 2. Triton II with 0.5 Clapton coils, Sigelei 150w Temp Control with Sony VTC4s
Max VG liquid, various sources, all the same results. Same results on 50/50 liquid too.
Thanks in advance for any help guys, it would be really appreciated.. gonna go have a smoke. :))
Hey guys, I need some help. I don't know what I'm ****ing up but I'm still burning coils within a few hours.. on my new tank, pretty much instantly. What do you guys generally do when you set up a new coil in a Subtank or Triton II, etc?
For my new Triton II, I've tried everything for priming. The last coil I basically flooded with priming, dripping a lot directly onto the coil and then leaving it to sit for ten minutes.. as soon as I vaped it enough that it was done flooding, it burnt. They burn whether I'm under the recommended wattage or not.. I started on 9w for a 1.8ohm Triton II coil, and it burnt anyway. I can't even slowly ramp up to the recommended wattage. :))
I have no coils left, but I will be picking some more up soon (probably the Ni200 Temp Control coils for the Triton II). Starting to feel like I have no other choice but to smoke cigarettes though. :blank:
My setup looks like this right now:
Vape 1. Subtank Mini with the newer model 1.2ohm coils, iTaste MVP3 30w
Vape 2. Triton II with 0.5 Clapton coils, Sigelei 150w Temp Control with Sony VTC4s
Max VG liquid, various sources, all the same results. Same results on 50/50 liquid too.
Thanks in advance for any help guys, it would be really appreciated.. gonna go have a smoke. :))
Couple things when you go to a new coil, start at about half.power of what you normally would. Slowly ramp this up to full power over a couple hours. High VG juice or s ver thick and you will have problems wicking this in about any tank unless it has large juice holes. Once you do burn one, it has a chance to impart that flavor into the rest of the tank. That happened to.me one time. I ran 50/50 juice until this crown tank. I had an offer for some 70/30 VG/PG and it wicks fine in my Crown, but that has fairly large juice holes and excellent.air flow.
Hey guys, I need some help. I don't know what I'm ****ing up but I'm still burning coils within a few hours.. on my new tank, pretty much instantly. What do you guys generally do when you set up a new coil in a Subtank or Triton II, etc?
For my new Triton II, I've tried everything for priming. The last coil I basically flooded with priming, dripping a lot directly onto the coil and then leaving it to sit for ten minutes.. as soon as I vaped it enough that it was done flooding, it burnt. They burn whether I'm under the recommended wattage or not.. I started on 9w for a 1.8ohm Triton II coil, and it burnt anyway. I can't even slowly ramp up to the recommended wattage. :))
I have no coils left, but I will be picking some more up soon (probably the Ni200 Temp Control coils for the Triton II). Starting to feel like I have no other choice but to smoke cigarettes though. :blank:
My setup looks like this right now:
Vape 1. Subtank Mini with the newer model 1.2ohm coils, iTaste MVP3 30w
Vape 2. Triton II with 0.5 Clapton coils, Sigelei 150w Temp Control with Sony VTC4s
Max VG liquid, various sources, all the same results. Same results on 50/50 liquid too.
Thanks in advance for any help guys, it would be really appreciated.. gonna go have a smoke. :))
Couple things when you go to a new coil, start at about half.power of what you normally would. Slowly ramp this up to full power over a couple hours. High VG juice or s ver thick and you will have problems wicking this in about any tank unless it has large juice holes. Once you do burn one, it has a chance to impart that flavor into the rest of the tank. That happened to.me one time. I ran 50/50 juice until this crown tank. I had an offer for some 70/30 VG/PG and it wicks fine in my Crown, but that has fairly large juice holes and excellent.air flow.
Hmm, I was ramping it up over half an hour or so, I'll try taking it even slower. But, with the .5 Triton Claptons, the recommended power is 40-45w, and I burnt one at 25w with my Sigelei. Much lower on that coil, and it won't really fire.
How long do you wait in between draws when you're using high VG? Do you chain vape, or wait 30 seconds or so?
I try to stay away from PG liquids, I don't like the feel of PG in a sub-ohm tank. They felt better to me in something like the Nautilus, because of PG's harsher throat hit. I know what you mean by a burnt coil imparting the taste to the rest of the liquid, it's gross and I dump the liquid out after.
So I guess my problem is probably wicking.. the thing is, other people seem to be having success on the same tanks and coils with high VG. :confused:
I slapped together a probably badly built coil using my Subtank Mini RBA deck, and I'm having better luck over the last couple hours. Maybe a solution for me could be a dripper? I would probably use my Sigelei a bit closer to it's full potential too. I'd still really like to use pre-built coils for convenience though..
Thanks for the response Melvang. :thumb:
Finally got new hexohm today. (yes, that's my alps 60% in the background)Show Image(http://i.imgur.com/nGkJelK.jpg)
I think I'm going to get this driptip to go on it:Show Image(http://halfmoonmods.com/wp-content/uploads/2015/12/IMG_20150627_1554102-456x456.jpg)
Stainless is ezpz to build with, officially. Kennedy rda rocking my world. That is all.
Also, if I can't sell this dna200 soon, I'll have a tobecco velocity that I'd be willing to part with.
So going through my garage I found this little shelf/stand thing that is great for holding all my vape stuff!I used a pen and a mini clamp to twist my twisted wire wire before I got a drill and started claptons. This video has a good place to get the idea of how to twist your own and was a good starting point for me !!Show Image(http://i.imgur.com/mLTFErph.jpg)
Also, got a ton of new stuff including a derringer RDA, a Haze RDA, a 200w SMOK KOOPER mod, and tons of juice I'll be posting a mini review of soon!
Looking to pick up a Velocity RDA, a Mutation X rta and a Aromamizer soon too. Possibly a brass/copper mech too if someone has a suggestion.
Also I'm getting much better at building coils and am loving the hell out of my RDAs because of it. Mastered making twisted coils and they are amazing for flavor.
Hey guys, I need some help. I don't know what I'm ****ing up but I'm still burning coils within a few hours.. on my new tank, pretty much instantly. What do you guys generally do when you set up a new coil in a Subtank or Triton II, etc?
For my new Triton II, I've tried everything for priming. The last coil I basically flooded with priming, dripping a lot directly onto the coil and then leaving it to sit for ten minutes.. as soon as I vaped it enough that it was done flooding, it burnt. They burn whether I'm under the recommended wattage or not.. I started on 9w for a 1.8ohm Triton II coil, and it burnt anyway. I can't even slowly ramp up to the recommended wattage. :))
I have no coils left, but I will be picking some more up soon (probably the Ni200 Temp Control coils for the Triton II). Starting to feel like I have no other choice but to smoke cigarettes though. :blank:
My setup looks like this right now:
Vape 1. Subtank Mini with the newer model 1.2ohm coils, iTaste MVP3 30w
Vape 2. Triton II with 0.5 Clapton coils, Sigelei 150w Temp Control with Sony VTC4s
Max VG liquid, various sources, all the same results. Same results on 50/50 liquid too.
Thanks in advance for any help guys, it would be really appreciated.. gonna go have a smoke. :))
Couple things when you go to a new coil, start at about half.power of what you normally would. Slowly ramp this up to full power over a couple hours. High VG juice or s ver thick and you will have problems wicking this in about any tank unless it has large juice holes. Once you do burn one, it has a chance to impart that flavor into the rest of the tank. That happened to.me one time. I ran 50/50 juice until this crown tank. I had an offer for some 70/30 VG/PG and it wicks fine in my Crown, but that has fairly large juice holes and excellent.air flow.
Hmm, I was ramping it up over half an hour or so, I'll try taking it even slower. But, with the .5 Triton Claptons, the recommended power is 40-45w, and I burnt one at 25w with my Sigelei. Much lower on that coil, and it won't really fire.
How long do you wait in between draws when you're using high VG? Do you chain vape, or wait 30 seconds or so?
I try to stay away from PG liquids, I don't like the feel of PG in a sub-ohm tank. They felt better to me in something like the Nautilus, because of PG's harsher throat hit. I know what you mean by a burnt coil imparting the taste to the rest of the liquid, it's gross and I dump the liquid out after.
So I guess my problem is probably wicking.. the thing is, other people seem to be having success on the same tanks and coils with high VG. :confused:
I slapped together a probably badly built coil using my Subtank Mini RBA deck, and I'm having better luck over the last couple hours. Maybe a solution for me could be a dripper? I would probably use my Sigelei a bit closer to it's full potential too. I'd still really like to use pre-built coils for convenience though..
Thanks for the response Melvang. :thumb:
Also, when I am priming a new coil, I hold the coil at an angle and drip juice onto the cotton until it soaks in, drip a bit more. I keep doing this until the juice sits on top. Then I put a drop on each juice hole and install in the tank. After filling the tank befornthe first hit, I close off the air flow as much as possible, block with my fingers and pull until I don't dlsee bubbles anymore. Then I start with low powered very short hits for an hour or so.
Even with the 70/30 VG/PG, I haven't had troubles chain vaping on breaks at work. Even outside in sub freezing weather.the only time I have had wicking issue in the cold was with the same mix, but using an iClear X1 tank.
Also, some flavors kill coils fast. This seems to be a common problem with coffee and chocolate flavors. I hat a coffee flavor that would kill iClear X1 coils in a hlaf hour. Any other juice, I could.go 2 weeks.
You might try a lower nic level. I had a lot of issues with coils tasting burned almost immediately when I ran 12+ nic. Also, you might want to experiment with different air flow settings and inhaling techniques. I can't really think of any reason otherwise why you would consistently be running into this problem.
So going through my garage I found this little shelf/stand thing that is great for holding all my vape stuff!Show Image(http://i.imgur.com/mLTFErph.jpg)
Also, got a ton of new stuff including a derringer RDA, a Haze RDA, a 200w SMOK KOOPER mod, and tons of juice I'll be posting a mini review of soon!
Looking to pick up a Velocity RDA, a Mutation X rta and a Aromamizer soon too. Possibly a brass/copper mech too if someone has a suggestion.
Also I'm getting much better at building coils and am loving the hell out of my RDAs because of it. Mastered making twisted coils and they are amazing for flavor.
Well... mt baker vapor is delicious. HOWEVER, watch out for getting double shots of extra flavor. The reviews said to, and I think those people are ****ing nuts. TOO STRONK.
And the citrus flavors all separated from the vg and pg and left clumpy **** in my tank. Had to rubbing alcohol cleanse them both.
I assume the MXJO are for your sigelei? Never heard of them, but the specs sound nice.
Gotcha.
Sad to see those wrapped with your artwork are getting retired. :(
Gotcha.
Sad to see those wrapped with your artwork are getting retired. :(
The question is when do we get some more wraps :P
Gotcha.
Sad to see those wrapped with your artwork are getting retired. :(
The question is when do we get some more wraps :P
i have some to download for free, just get some clear wraps!
Gotcha.
Sad to see those wrapped with your artwork are getting retired. :(
The question is when do we get some more wraps :P
i have some to download for free, just get some clear wraps!
Ive never actually re-wrapped batteries. Easy?
Gotcha.
Sad to see those wrapped with your artwork are getting retired. :(
The question is when do we get some more wraps :P
i have some to download for free, just get some clear wraps!
Ive never actually re-wrapped batteries. Easy?
https://www.imrbatteries.com/blog/make-your-own-custom-battery-wraps/
Show Image(http://i.imgur.com/uOOzO1J.jpg)
6 months in,
Out with the old 18650's in with the freshes
I'm running .25 SS coils in just regular power mode @ 40W on my realeaux, and it turns out I'm going through a coil per week at least. The taste when they go bad is so ****ing horrible I almost puke. I even brush my teeth and can still taste it. Should I try TC with them? What temp and wattage?
Okay. Washed out and replaced coils on all 3 tanks. Tried 5 diff liquids with varying levels of nic and VG and PG. Everything tastes and smells like ****. dgneo suggested maybe "Vaper's Tongue". Pretty sure that is my problem. Ughhhhhhhhhhhhhhh. Wanna puke...
Dripper has been life changing, I can't believe I went so long without one. Really loving it, great flavour and satisfying vapour. Carrying a bottle of liquid around with me isn't really inconvenient either, neither is dripping, except while driving. It's easy enough to do at a red light though.
Mostly, it's awesome not having to buy coils. :))
Dripper has been life changing, I can't believe I went so long without one. Really loving it, great flavour and satisfying vapour. Carrying a bottle of liquid around with me isn't really inconvenient either, neither is dripping, except while driving. It's easy enough to do at a red light though.
Mostly, it's awesome not having to buy coils. :))
http://ezcloudcompany.com/products/ez-dripper
I do love my drippers
http://silversteamvapor.com/products/titan I wish I could convince myself this or a authentic tuglyfe was worth it.
just received my joyetech cuboid and I'm really digging that it has tcr profiles for multiples types of stainless steel. I also won an authentic tuglyfe from a contest I entered from flawless it's amazing and I love the coating however my $30 noisy cricket is my go to for mechs it so small I love it.http://silversteamvapor.com/products/titan I wish I could convince myself this or a authentic tuglyfe was worth it.
The tuglyfes are amazing. That + an Aeolus are my main at home build.
just received my joyetech cuboid and I'm really digging that it has tcr profiles for multiples types of stainless steel. I also won an authentic tuglyfe from a contest I entered from flawless it's amazing and I love the coating however my $30 noisy cricket is my go to for mechs it so small I love it.http://silversteamvapor.com/products/titan I wish I could convince myself this or a authentic tuglyfe was worth it.
The tuglyfes are amazing. That + an Aeolus are my main at home build.
I also got a griffin rta(love it)and a kbox120 ,a 30mm VCMT with the velocity deck and 10ml tank size in the mail. Its probably going to only go on my releaux because it will look ridiculous on anything else.
I also have a purple aeolus lite and wotofo serpent coming.
Also received a Cubis and cleito subogm tanks for testing and review purposes and haven't gotten into them yet
Dripper has been life changing, I can't believe I went so long without one. Really loving it, great flavour and satisfying vapour. Carrying a bottle of liquid around with me isn't really inconvenient either, neither is dripping, except while driving. It's easy enough to do at a red light though.
Mostly, it's awesome not having to buy coils. :))
just received my joyetech cuboid and I'm really digging that it has tcr profiles for multiples types of stainless steel. I also won an authentic tuglyfe from a contest I entered from flawless it's amazing and I love the coating however my $30 noisy cricket is my go to for mechs it so small I love it.http://silversteamvapor.com/products/titan I wish I could convince myself this or a authentic tuglyfe was worth it.
The tuglyfes are amazing. That + an Aeolus are my main at home build.
I also got a griffin rta(love it)and a kbox120 ,a 30mm VCMT with the velocity deck and 10ml tank size in the mail. Its probably going to only go on my releaux because it will look ridiculous on anything else.
I also have a purple aeolus lite and wotofo serpent coming.
Also received a Cubis and cleito subogm tanks for testing and review purposes and haven't gotten into them yet
just received my joyetech cuboid and I'm really digging that it has tcr profiles for multiples types of stainless steel. I also won an authentic tuglyfe from a contest I entered from flawless it's amazing and I love the coating however my $30 noisy cricket is my go to for mechs it so small I love it.http://silversteamvapor.com/products/titan I wish I could convince myself this or a authentic tuglyfe was worth it.
The tuglyfes are amazing. That + an Aeolus are my main at home build.
I also got a griffin rta(love it)and a kbox120 ,a 30mm VCMT with the velocity deck and 10ml tank size in the mail. Its probably going to only go on my releaux because it will look ridiculous on anything else.
I also have a purple aeolus lite and wotofo serpent coming.
Also received a Cubis and cleito subogm tanks for testing and review purposes and haven't gotten into them yet
My goodness you are really into this. So much gear.
And me too on the 10ml tank. I need like a 20 when I'm anxious. Haha.
Any suggestions for a site that has quality single, two fruit, or simple flavor profiles for decent prices that also stocks coils for the crown tank?
Any suggestions for a site that has quality single, two fruit, or simple flavor profiles for decent prices that also stocks coils for the crown tank?
https://www.myvapingoutlet.com/
If you also want a good premium line to look at, check out the ktb line. I like all the flavors available. Otherwise, the entire house line is good, too.
Any suggestions for a site that has quality single, two fruit, or simple flavor profiles for decent prices that also stocks coils for the crown tank?
https://www.myvapingoutlet.com/
If you also want a good premium line to look at, check out the ktb line. I like all the flavors available. Otherwise, the entire house line is good, too.
Didn't see any coils for the Uwell Crown. Also, the required signature doesn't work well for me. I frequently work an hour from home, don't get paid time off, and wife works full time.
Any suggestions for a site that has quality single, two fruit, or simple flavor profiles for decent prices that also stocks coils for the crown tank?
https://www.myvapingoutlet.com/
If you also want a good premium line to look at, check out the ktb line. I like all the flavors available. Otherwise, the entire house line is good, too.
Didn't see any coils for the Uwell Crown. Also, the required signature doesn't work well for me. I frequently work an hour from home, don't get paid time off, and wife works full time.
Ship to work? I can't remember if that's a Texas or vape gear + courier requirement now. I know they sell crown coils, but it may only be in store instead of online.
If you can't find anything that will work, let me know and I don't mind being a local proxy type for it.
Any suggestions for a site that has quality single, two fruit, or simple flavor profiles for decent prices that also stocks coils for the crown tank?
Any suggestions for a site that has quality single, two fruit, or simple flavor profiles for decent prices that also stocks coils for the crown tank?
Mech Sauce (http://mechsauce.com/) is my goto for juice. I haven't bout coils in about a year since I've only been using drippers or rebuildable tanks.
Any suggestions for a site that has quality single, two fruit, or simple flavor profiles for decent prices that also stocks coils for the crown tank?
Mech Sauce (http://mechsauce.com/) is my goto for juice. I haven't bout coils in about a year since I've only been using drippers or rebuildable tanks.
They don't sell any coils, I don't want to buy coils and juice from two different sites for shipping reasons. Dripping isn't viable for me with my job, and I don't want to get into rebuildables at this point as I just stepped down to .3% and am using this as a method to get off ciggs, not as a hobby.
Any suggestions for a site that has quality single, two fruit, or simple flavor profiles for decent prices that also stocks coils for the crown tank?
Mech Sauce (http://mechsauce.com/) is my goto for juice. I haven't bout coils in about a year since I've only been using drippers or rebuildable tanks.
They don't sell any coils, I don't want to buy coils and juice from two different sites for shipping reasons. Dripping isn't viable for me with my job, and I don't want to get into rebuildables at this point as I just stepped down to .3% and am using this as a method to get off ciggs, not as a hobby.
Just want to point out that building coils is MUCH cheaper as well as it will help you dial in your preference (thus making it easier to quit, trust me)
Any suggestions for a site that has quality single, two fruit, or simple flavor profiles for decent prices that also stocks coils for the crown tank?
Mech Sauce (http://mechsauce.com/) is my goto for juice. I haven't bout coils in about a year since I've only been using drippers or rebuildable tanks.
They don't sell any coils, I don't want to buy coils and juice from two different sites for shipping reasons. Dripping isn't viable for me with my job, and I don't want to get into rebuildables at this point as I just stepped down to .3% and am using this as a method to get off ciggs, not as a hobby.
Just want to point out that building coils is MUCH cheaper as well as it will help you dial in your preference (thus making it easier to quit, trust me)
I have been off traditional ciggs for over a year now. Just switched to a new setup. Looking for a place with coils for it and at least decent juice. I tried Mech Sauce, both mech milk and medusa milk and was a bit underwhelmed by the flavor. Not bad, just not what I am looking for.
Any suggestions for a site that has quality single, two fruit, or simple flavor profiles for decent prices that also stocks coils for the crown tank?
Mech Sauce (http://mechsauce.com/) is my goto for juice. I haven't bout coils in about a year since I've only been using drippers or rebuildable tanks.
They don't sell any coils, I don't want to buy coils and juice from two different sites for shipping reasons. Dripping isn't viable for me with my job, and I don't want to get into rebuildables at this point as I just stepped down to .3% and am using this as a method to get off ciggs, not as a hobby.
Just want to point out that building coils is MUCH cheaper as well as it will help you dial in your preference (thus making it easier to quit, trust me)
I have been off traditional ciggs for over a year now. Just switched to a new setup. Looking for a place with coils for it and at least decent juice. I tried Mech Sauce, both mech milk and medusa milk and was a bit underwhelmed by the flavor. Not bad, just not what I am looking for.
Fair enough. Empress Milk (http://mechsauce.com/empress-milk/) if by far my favorite juice. Ever. But everyone has their own taste.
Give Vapor DNA a shot (http://www.vapordna.com/Default.asp) the Prototype and Millennium Potion (http://www.vapordna.com/Millenium-Potion-E-Juice-s/1900.htm) are their own juice and the flavor is pretty great, but the PG is too high for my taste but their Peach and Strawberry are some of my favorites. They sell a ton of gear so I'm sure that they sell that coils that you're looking for. Is this them? (http://www.vapordna.com/Uwell-Crown-Replacement-Coil-p/crownc.htm)
Any suggestions for a site that has quality single, two fruit, or simple flavor profiles for decent prices that also stocks coils for the crown tank?
Mech Sauce (http://mechsauce.com/) is my goto for juice. I haven't bout coils in about a year since I've only been using drippers or rebuildable tanks.
They don't sell any coils, I don't want to buy coils and juice from two different sites for shipping reasons. Dripping isn't viable for me with my job, and I don't want to get into rebuildables at this point as I just stepped down to .3% and am using this as a method to get off ciggs, not as a hobby.
Just want to point out that building coils is MUCH cheaper as well as it will help you dial in your preference (thus making it easier to quit, trust me)
I have been off traditional ciggs for over a year now. Just switched to a new setup. Looking for a place with coils for it and at least decent juice. I tried Mech Sauce, both mech milk and medusa milk and was a bit underwhelmed by the flavor. Not bad, just not what I am looking for.
Fair enough. Empress Milk (http://mechsauce.com/empress-milk/) if by far my favorite juice. Ever. But everyone has their own taste.
Give Vapor DNA a shot (http://www.vapordna.com/Default.asp) the Prototype and Millennium Potion (http://www.vapordna.com/Millenium-Potion-E-Juice-s/1900.htm) are their own juice and the flavor is pretty great, but the PG is too high for my taste but their Peach and Strawberry are some of my favorites. They sell a ton of gear so I'm sure that they sell that coils that you're looking for. Is this them? (http://www.vapordna.com/Uwell-Crown-Replacement-Coil-p/crownc.htm)
Yeah, those are the coils, that is actually where I bought the tank and my evic VT from, don't know why I didn't think of them. So far, I am having good luck with 70%VG wicking alright. Kind of paranoid about going thicker as I have to go outside to vape at work. I work in a lot of food grade facilities, so technically, I can't even have my vape in my pocket. When I ordered that stuff, I got a free bottle of the butterscotch, flavor was spot on, very little throat hit (good for me right now), but man was it rich.n I ended up cutting the flavor with some french vanilla.
Its terrible guys.
I left my Ni200 at home and accidentally threw in Kanthal A1 instead. I've been on it for a month and a half. 4 days ago I ran out of cotton. I have been reusing used bits. Its horrible and its got some dry burn marks on it. We haven't been into town for over a week so I can't even get make up wipes or nuffin. Down to my last 15ml of juice. And I leave mid feb. D: All the rest of my orders have turned up at my house but I have to wait around a month before I head back. It is very bad at the moment
Edit: Knowing that I have over 2L of juice and fresh cotton at home makes me want to cry
oh GOD that kennedy 24mm is looking soooooo ****ing sexy!!!! I don't know what it us about them because it's such a simple looking RDA but they are just classy I guess is what I'm looking for :thumb:Show Image(http://i.imgur.com/SGWQMNU.jpg)Show Image(http://i.imgur.com/4jqmpJc.jpg)
Today was a good rebuild day :D
Show Image(http://i.imgur.com/SGWQMNU.jpg)Show Image(http://i.imgur.com/4jqmpJc.jpg)
Today was a good rebuild day :D
oh GOD that kennedy 24mm is looking soooooo ****ing sexy!!!! I don't know what it us about them because it's such a simple looking RDA but they are just classy I guess is what I'm looking for :thumb:Show Image(http://i.imgur.com/SGWQMNU.jpg)Show Image(http://i.imgur.com/4jqmpJc.jpg)
Today was a good rebuild day :D
On another note I need to get a copper rda to match this
http://www.ecig.com/mad-industries-penny-mod.html
I really didn't need another mod but an authentic mad industries penny for $29 I couldn't pass it up :thumb:
Just an update for you all. Be careful of ecig.com.great I just got my shopping notice
Just finally got a response from them, the only solution they have for me is to send the incorrect mod back to them and get a refund because they are out of the penny mod.
Pretty much sucks.
Just an update for you all. Be careful of ecig.com.great I just got my shopping notice
Just finally got a response from them, the only solution they have for me is to send the incorrect mod back to them and get a refund because they are out of the penny mod.
Pretty much sucks.
Its terrible guys.
I left my Ni200 at home and accidentally threw in Kanthal A1 instead. I've been on it for a month and a half. 4 days ago I ran out of cotton. I have been reusing used bits. Its horrible and its got some dry burn marks on it. We haven't been into town for over a week so I can't even get make up wipes or nuffin. Down to my last 15ml of juice. And I leave mid feb. D: All the rest of my orders have turned up at my house but I have to wait around a month before I head back. It is very bad at the moment
Edit: Knowing that I have over 2L of juice and fresh cotton at home makes me want to cry
Where are you and where is your gear?
236ml of 3mg nic delivered! Almost off the nic!Show Image(http://i.imgur.com/qPfazg4.jpg)
****ty part is the bottle opening is so ****ing big that it is unpossible to fill tank without pouring down air hole. Must grab syringes.
236ml of 3mg nic delivered! Almost off the nic!Show Image(http://i.imgur.com/qPfazg4.jpg)
****ty part is the bottle opening is so ****ing big that it is unpossible to fill tank without pouring down air hole. Must grab syringes.
If you have some 30mL bottles sitting around just decant into one of those. That's what I do.
236ml of 3mg nic delivered! Almost off the nic!Show Image(http://i.imgur.com/qPfazg4.jpg)
****ty part is the bottle opening is so ****ing big that it is unpossible to fill tank without pouring down air hole. Must grab syringes.
236ml of 3mg nic delivered! Almost off the nic!Show Image(http://i.imgur.com/qPfazg4.jpg)
****ty part is the bottle opening is so ****ing big that it is unpossible to fill tank without pouring down air hole. Must grab syringes.
If you have some 30mL bottles sitting around just decant into one of those. That's what I do.
My fav bottles are the ones with the long tips from mechsauce. Problem is I threw them all away the other day cleaning my office. Oooooops. I have 100ml left of orange stuff from them, though, so once I get through that I'll "decant" it up.
Welp.. I'm finally joining the vape club. It's time.
Starting off with a Kanger Subvox Mini kit.. it seemed nice enough for a beginner. And got a whole ton of small bottles of juices to try from different places online, along with extra coils, and even a pretty decal for it ;) What have I gotten myself into.. First mechanical keyboards, then expensive coffee, then fountain pens and inks.. now this. All these hobbies are gonna get me living on the street homeless LOL
Welp.. I'm finally joining the vape club. It's time.
Starting off with a Kanger Subvox Mini kit.. it seemed nice enough for a beginner. And got a whole ton of small bottles of juices to try from different places online, along with extra coils, and even a pretty decal for it ;) What have I gotten myself into.. First mechanical keyboards, then expensive coffee, then fountain pens and inks.. now this. All these hobbies are gonna get me living on the street homeless LOL
Tugbox 510 Spring Pin Issue
Sorry for the vertical picture, it was easier to hold my phone like that. :pMore
If you look at the red wire and follow it to the bottom of the 510 connector you'll see it attaches to a small pin that is seated a tube, this is the spring loaded part of the 510 that makes contact with the bottom of your RDA/RTA/tank/whatever. From what I've seen after playing with it the small pin attached to the red wire is a bit too small, leading to a bad connection. The solution is moving the red wire around until it forces the small pin to bind in the tube, this has no affect on the adjustability of the 510 and it still works with all my RDAs.
(Attachment Link)
^ ****ty diagram of what I'm saying.
Honestly, why is this a thing now?I was never a fan of the word vape. But to sort of answer your question, electronic cigarettes where supposedly developed by a man in China (2003) who lost his father to lung cancer. I lost my dad to the lung cancer as well (2012). Thankfully I was able to quit smoking due to controlled E-cig use, and determination. Some people just like the alternative. Technically E-cigs are a healthier alternative to burning real tobacco, although, there is plenty evidence that Nicotine by itself does a lot of damage to the human body. I'm not a doctor of health so take all this with a bowl of chicken noodle soup (or vegetable).
Honestly, why is this a thing now?I was never a fan of the word vape. But to sort of answer your question, electronic cigarettes where supposedly developed by a man in China (2003) who lost his father to lung cancer. I lost my dad to the lung cancer as well (2012). Thankfully I was able to quit smoking due to controlled E-cig use, and determination. Some people just like the alternative. Technically E-cigs are a healthier alternative to burning real tobacco, although, there is plenty evidence that Nicotine by itself does a lot of damage to the human body. I'm not a doctor of health so take all this with a bowl of chicken noodle soup (or vegetable).
Honestly, why is this a thing now?I was never a fan of the word vape. But to sort of answer your question, electronic cigarettes where supposedly developed by a man in China (2003) who lost his father to lung cancer. I lost my dad to the lung cancer as well (2012). Thankfully I was able to quit smoking due to controlled E-cig use, and determination. Some people just like the alternative. Technically E-cigs are a healthier alternative to burning real tobacco, although, there is plenty evidence that Nicotine by itself does a lot of damage to the human body. I'm not a doctor of health so take all this with a bowl of chicken noodle soup (or vegetable).
Sorry to hear that and thanks for the details. These are some legit purposes but I find it weird that all these hipsters jump on it as well. But perhaps I'm very opinionated.
Hehe the vapor clouds can get ridiculous. That liquid sounds decent is that a PG/VG blend? I couldn't find info about the ingredients. If I vape a liquid with more than 20% PG my throat becomes sore.Honestly, why is this a thing now?I was never a fan of the word vape. But to sort of answer your question, electronic cigarettes where supposedly developed by a man in China (2003) who lost his father to lung cancer. I lost my dad to the lung cancer as well (2012). Thankfully I was able to quit smoking due to controlled E-cig use, and determination. Some people just like the alternative. Technically E-cigs are a healthier alternative to burning real tobacco, although, there is plenty evidence that Nicotine by itself does a lot of damage to the human body. I'm not a doctor of health so take all this with a bowl of chicken noodle soup (or vegetable).
Sorry to hear that and thanks for the details. These are some legit purposes but I find it weird that all these hipsters jump on it as well. But perhaps I'm very opinionated.
Hipsters need to quick smoking too. Now, blowing big ass clouds in groups of people in public is un-cool. But let it be known that not all vapers are like that, and some of us find it just as annoying as you do.
Now, On the other hand ive got some pretty good vapemail lately. I got a DNA200 Reaulaux, 6 LG HE4s, and my new ADV juice called 'Snowdrift' by Bigglesworth labs. http://bigglesworthlabs.com/snowdrift/ My first ever larger than 30ml bottle i've ordered.
Hehe the vapor clouds can get ridiculous. That liquid sounds decent is that a PG/VG blend? I couldn't find info about the ingredients. If I vape a liquid with more than 20% PG my throat becomes sore.Honestly, why is this a thing now?I was never a fan of the word vape. But to sort of answer your question, electronic cigarettes where supposedly developed by a man in China (2003) who lost his father to lung cancer. I lost my dad to the lung cancer as well (2012). Thankfully I was able to quit smoking due to controlled E-cig use, and determination. Some people just like the alternative. Technically E-cigs are a healthier alternative to burning real tobacco, although, there is plenty evidence that Nicotine by itself does a lot of damage to the human body. I'm not a doctor of health so take all this with a bowl of chicken noodle soup (or vegetable).
Sorry to hear that and thanks for the details. These are some legit purposes but I find it weird that all these hipsters jump on it as well. But perhaps I'm very opinionated.
Hipsters need to quick smoking too. Now, blowing big ass clouds in groups of people in public is un-cool. But let it be known that not all vapers are like that, and some of us find it just as annoying as you do.
Now, On the other hand ive got some pretty good vapemail lately. I got a DNA200 Reaulaux, 6 LG HE4s, and my new ADV juice called 'Snowdrift' by Bigglesworth labs. http://bigglesworthlabs.com/snowdrift/ My first ever larger than 30ml bottle i've ordered.
Just a quick question; wouldn't copper RDAs be a bad idea? A couple of my friends that vape have them, and I was wondering about the safety of them.I could see an issue with any liquid that contains a high PG mixture touching a soft metal like copper. I've only used stainless steal devices and parts so I'm not exactly sure but if you meant using copper to build a coil.. yikes. Anyone remember that Mythbusters jailbreak experiment involving salsa?
Im interested in getting a new mechanical mod and tank for it. Been rocking a StringRay clone with a Subtank mini for like a year and would like something that isnt covered in metal. Any tips?If you do buy a mechanical mod make sure you buy a handful of 'fuses' or a Kick (by Smoktech - variable wattage w/circuit protection) to protect yourself from battery malfunction. If it doesn't have a vent at the bottom don't buy it. These giant rechargeable batteries can be hazardous if they don't have something to break the circuit when a problem starts. If you decide to go with something different try to stay away from knock off products. Remember the 'hoverboards'.
As far tank goes I would like it to hold at least 3ml of juice, RBA and not a dripper. Really like my Subtank but want something that easier to build, not a lot of space on the RBA deck. Other than that I really like the Subtank!
As far as mod goes I just want something like the Tugboat by Flawless, really like that splatter effect but I dont want to pay for a tank I wont use. As long as its not naked metal on the outside Im happy really. Ideally under $100
I got 236ml of 3mg nic 80vg/20pg Green Apple from Mount Baker Vapor. It was so tasty.
I ordered 236 more of 3mg AND 6mg. They both taste like rubbing alcohol.
I complained and they told me to wait 6 ****ing weeks for a bottle that size to steep (after the first bottle required no steeping). Wtf?
I got 236ml of 3mg nic 80vg/20pg Green Apple from Mount Baker Vapor. It was so tasty.You may have found a quality control issue and they have to reproduce some batches.
I ordered 236 more of 3mg AND 6mg. They both taste like rubbing alcohol.
I complained and they told me to wait 6 ****ing weeks for a bottle that size to steep (after the first bottle required no steeping). Wtf?
been a while figured id update my favorite thread :pHoly Moly! So that's a Tugboat!Show Image(http://i.imgur.com/aph3jOc.jpg)
flat 22g kanthal is my jamzzzShow Image(http://i.imgur.com/yxpzaa3.jpg)
oh new goblin mini v2 dropped! topfill FTWShow Image(http://i.imgur.com/jp9cs0S.jpg)
yaaay baby DNA200 with trinity glass
choo choo
been a while figured id update my favorite thread :pShow Image(http://i.imgur.com/aph3jOc.jpg)
flat 22g kanthal is my jamzzzShow Image(http://i.imgur.com/yxpzaa3.jpg)
oh new goblin mini v2 dropped! topfill FTWShow Image(http://i.imgur.com/jp9cs0S.jpg)
yaaay baby DNA200 with trinity glass
choo choo
Welp.. I'm finally joining the vape club. It's time.
Starting off with a Kanger Subvox Mini kit.. it seemed nice enough for a beginner. And got a whole ton of small bottles of juices to try from different places online, along with extra coils, and even a pretty decal for it ;) What have I gotten myself into.. First mechanical keyboards, then expensive coffee, then fountain pens and inks.. now this. All these hobbies are gonna get me living on the street homeless LOL
I know how you feel. Although switching from cigs to vape has saved be quite a bit of money, which I promptly started spending on keyboards =P
Hey guys. Got a question for you. I made my first clapton build the other day. 34 over single 24. Dual 5 wrap on a 3mm post. The flavor is great, but it takes a bit too long to heat up. Any suggestions going forward? Maybe a smaller diameter or less wraps? Looking for a good combination of flavor and vapor production.I got this tip to try nichrone from punks nichrome heats faster then kanthal so try a Clapton with a 26 guage nichrome core with with 32g kanthal wrapping. I started with those however I have moved on to pretty much straight stainless steel now which ramps much faster then kanthal but also has a much lower resistance so I love stainless Clapton's but unfortunately they are not for everyone as they give such a low resistance
Hey guys. Got a question for you. I made my first clapton build the other day. 34 over single 24. Dual 5 wrap on a 3mm post. The flavor is great, but it takes a bit too long to heat up. Any suggestions going forward? Maybe a smaller diameter or less wraps? Looking for a good combination of flavor and vapor production.got this from tip to try nichrone from punks nichrome heats faster then kanthal so try a Clapton with a 26 guage nichrome core with with 32g kanthal wrapping. I started with those however I have moved on to pretty much straight stainless steel now which ramps much faster then kanthal but also has a much lower resistance so I love stainless Clapton's but unfortunately they are not for everyone as they give such a low resistance
I picked up some Vape gear awhile ago (magma reborn a reauleaux dna200 and a Kennedy 24) but have had to cut my budget due to some recent money issues .....I'm a single first time mom and its been kind of a shock for me adjusting (also a single mother) so I apologize if I haven't been around or answering peoples PMS I love you all and I will be back but me and Arianna are still trying to figure this whole thing out !!
Keep vaping everyone
I have been smokefree since august 2015 due to a friend from this sub recomending it to me and sharing his experience thanks again PD
Vape on everyone
Hey guys. Got a question for you. I made my first clapton build the other day. 34 over single 24. Dual 5 wrap on a 3mm post. The flavor is great, but it takes a bit too long to heat up. Any suggestions going forward? Maybe a smaller diameter or less wraps? Looking for a good combination of flavor and vapor production.got this from tip to try nichrone from punks nichrome heats faster then kanthal so try a Clapton with a 26 guage nichrome core with with 32g kanthal wrapping. I started with those however I have moved on to pretty much straight stainless steel now which ramps much faster then kanthal but also has a much lower resistance so I love stainless Clapton's but unfortunately they are not for everyone as they give such a low resistance
I picked up some Vape gear awhile ago (magma reborn a reauleaux dna200 and a Kennedy 24) but have had to cut my budget due to some recent money issues .....I'm a single first time mom and its been kind of a shock for me adjusting (also a single mother) so I apologize if I haven't been around or answering peoples PMS I love you all and I will be back but me and Arianna are still trying to figure this whole thing out !!
Keep vaping everyone
I have been smokefree since august 2015 due to a friend from this sub recomending it to me and sharing his experience thanks again PD
Vape on everyone
:p
Man, my little kick could only do 12 watts max, but anymore than 8 watts and my 800mAh battery would only last like 30min. What the hell are you using that is capable of 110 watts?!
E cigs running between 3 and 9 watts? Lol wut? More like ~110!
Man, my little kick could only do 12 watts max, but anymore than 8 watts and my 800mAh battery would only last like 30min. What the hell are you using that is capable of 110 watts?!
E cigs running between 3 and 9 watts? Lol wut? More like ~110!
<3Show Image(http://vtpics.vapertrain.com/voltagechart.jpg)
Ohhhh, I forgot about you RBAs folks. Off the shelf 1.5Ω atomizers were fine for me man. I wish I would have found this forum thread when I was still vaping.<3Show Image(http://vtpics.vapertrain.com/voltagechart.jpg)
Yea, there's no way I'm running anything as high as 1.5Ω. That's way too high of a resistance for me to be happy with. 0.15Ω - 0.25Ω seems to be my happy zone, depending on the setup. Honestly, idk how anyone could be vaping in the 2+Ω range.
Check out Steam Engine (http://www.steam-engine.org/ohm.asp) for a more exact Ohm's Law calculator.
Ohhhh, I forgot about you RBAs folks. Off the shelf 1.5Ω atomizers were fine for me man. I wish I would have found this forum thread when I was still vaping.<3Show Image(http://vtpics.vapertrain.com/voltagechart.jpg)
Yea, there's no way I'm running anything as high as 1.5Ω. That's way too high of a resistance for me to be happy with. 0.15Ω - 0.25Ω seems to be my happy zone, depending on the setup. Honestly, idk how anyone could be vaping in the 2+Ω range.
Check out Steam Engine (http://www.steam-engine.org/ohm.asp) for a more exact Ohm's Law calculator.
My contribution. Twisted Messes RDA + Twisted Messes x Dovpo box mod + Alien Clapton by the good folks at Local Vape Costa MesaShow Image(https://i.gyazo.com/8d398cde6fb8c4fb97ece0f35a9a842e.png)
that's funny I just wrote local an email seeing if I can Pre order one or get on a list that new v2 is so freaking sexy !!!My contribution. Twisted Messes RDA + Twisted Messes x Dovpo box mod + Alien Clapton by the good folks at Local Vape Costa MesaShow Image(https://i.gyazo.com/8d398cde6fb8c4fb97ece0f35a9a842e.png)
proxy me a petri v2... :'( they sold out online
My contribution. Twisted Messes RDA + Twisted Messes x Dovpo box mod + Alien Clapton by the good folks at Local Vape Costa MesaShow Image(https://i.gyazo.com/8d398cde6fb8c4fb97ece0f35a9a842e.png)
proxy me a petri v2... :'( they sold out online
Punks, you want me to check the local stock for you? I could probably swing by there some time this week.My contribution. Twisted Messes RDA + Twisted Messes x Dovpo box mod + Alien Clapton by the good folks at Local Vape Costa MesaShow Image(https://i.gyazo.com/8d398cde6fb8c4fb97ece0f35a9a842e.png)
proxy me a petri v2... :'( they sold out online
Punks, you want me to check the local stock for you? I could probably swing by there some time this week.My contribution. Twisted Messes RDA + Twisted Messes x Dovpo box mod + Alien Clapton by the good folks at Local Vape Costa MesaShow Image(https://i.gyazo.com/8d398cde6fb8c4fb97ece0f35a9a842e.png)
proxy me a petri v2... :'( they sold out online
Not a fan of my Reaulaux DNA200. Considering selling it and getting a SXmini ML class or perhaps a different device. What do you think? Anyone here had an SXmini?
Not a fan of my Reaulaux DNA200. Considering selling it and getting a SXmini ML class or perhaps a different device. What do you think? Anyone here had an SXmini?
What don't you like about it? It seems like the sx is a significant downgrade in capability.
ya DNA s are really for people who like ****ing with temp control on the other hand I love ny Rollie but really want an sx mod oh and also a hohmwrecker and a tugboat and .....on and onNot a fan of my Reaulaux DNA200. Considering selling it and getting a SXmini ML class or perhaps a different device. What do you think? Anyone here had an SXmini?
What don't you like about it? It seems like the sx is a significant downgrade in capability.
Its just too large, the fit & finish on it is terrible, and i thought i would enjoy escribe, but meh. I never touch it because i hardly ever use TC. I currently get like 4 days out of a set of batteries.
So really i just want a nice high quality device, and i currently only ADV @ 40w with a fused clapton in my Wotofo Serpent
but really want an sx mod oh and also a hohmwrecker and a tugboat and .....on and on
Not a fan of my Reaulaux DNA200. Considering selling it and getting a SXmini ML class or perhaps a different device. What do you think? Anyone here had an SXmini?
Not a fan of my Reaulaux DNA200. Considering selling it and getting a SXmini ML class or perhaps a different device. What do you think? Anyone here had an SXmini?
I'm struggling with my rx200, I used it extensively with the Smok tdv4. So after wismec announced their 510's are **** and will break/void warranty if use you anything other than wismec attys I'm expecting it to break soon. I purchased a fatty daddy 510 to dremel in a replace the **** one since it's my favorite mod, vape struggles :(
The sx mini looks nice, I just can't figure out why it's $200. What's your normal vape setup? Do you enjoy TC? Battery life?
[/m
The 510 thing is another reason I'm out, and their response has made me not want any joyetech/Wismec products. But my normal Vape set up is currently a Wotofo Serpent with a .45 fused Clapton running 35-40w, I can take or leave TC, I do feel like it can boost battery life a bit so if I know I'll be away for a very long time I'll use it but 98 times out of 100 I'm in wattage mode. As for battery life I get like 4-5 days out of my reaulaux which is just insane and way more than nessisary.
I've been really turned off to vaping since I keep getting all these inconsistent juice orders. It is prob because I've been trying all these really cheap places. I mean... c'mon now... my last 240ml from MBV tasted like rubbing alcohol while the previous 240 tasted like delicious green apple. And they tell me it takes 4-6 weeks to steep, and only then can I even try to return it.
I guess it is time to nut up and buy some "premium" juice. Advice?
I've been really turned off to vaping since I keep getting all these inconsistent juice orders. It is prob because I've been trying all these really cheap places. I mean... c'mon now... my last 240ml from MBV tasted like rubbing alcohol while the previous 240 tasted like delicious green apple. And they tell me it takes 4-6 weeks to steep, and only then can I even try to return it.
I guess it is time to nut up and buy some "premium" juice. Advice?
RIP
Today I put my batteries in my mech mod the wrong way and didn't notice. The battery then proceeded to explode and light my mech mod on fire. All the solder melted off the wires and the tray actually lit on fire. I need a new mod now. I'm thinking about getting a Rx200 type mod. Juice is no longer the issue
RIP
Today I put my batteries in my mech mod the wrong way and didn't notice. The battery then proceeded to explode and light my mech mod on fire. All the solder melted off the wires and the tray actually lit on fire. I need a new mod now. I'm thinking about getting a Rx200 type mod. Juice is no longer the issue
RIP
Today I put my batteries in my mech mod the wrong way and didn't notice. The battery then proceeded to explode and light my mech mod on fire. All the solder melted off the wires and the tray actually lit on fire. I need a new mod now. I'm thinking about getting a Rx200 type mod. Juice is no longer the issue
oiiii I didn't even notice that you got the moonshot I am really debating on picking this up if you have the time shoot me your thoughts on that sexy lil choderShow Image(http://i.imgur.com/50VeeLT.jpg)
Vape just died at work, time to bang out! Go home and jump on the slack
Got a krixus today to try. Not entirely sure so far, since I was able to burn a coil out in about 4 puffs.
Show Image(http://i.imgur.com/0nifG4K.jpg)
treat yo self
Got a bottle of Suicide Bunny (Original Bunny) with my last order. Seen it mentioned a few times and people seem to like. I must say it was a major disappointment. Sure the flavor is good even if the cream kinda covers the strawberry, but it does not justify $12 for 15ml.
Just ordered my Reuleaux RX200 and 4 samsung batteries. :D gonna get back on that horse
Man, my Sigelei 150 TC started falling apart maybe 4-5 months after buying it. The magnets are gone... the case is cracked... and so on. It's been my daily mod since I purchased it brand new.
I gave my wife my Sigelei 30w and now that's malfunctioning. It's giving me fix atomizer, with cleaned contacts, tightly screwed in, and so on.
Both definitely are on the fritz. 30w is unuseable.
Are there any really well built ss-temp controlled devices out there?
Just ordered my Reuleaux RX200 and 4 samsung batteries. :D gonna get back on that horse
Excellent choice. My ipv5 took a bath yesterday and even though it seems to be working fine after a rice treatment, I'm contemplating getting a third rollo in red/black.Man, my Sigelei 150 TC started falling apart maybe 4-5 months after buying it. The magnets are gone... the case is cracked... and so on. It's been my daily mod since I purchased it brand new.
I gave my wife my Sigelei 30w and now that's malfunctioning. It's giving me fix atomizer, with cleaned contacts, tightly screwed in, and so on.
Both definitely are on the fritz. 30w is unuseable.
Are there any really well built ss-temp controlled devices out there?
Reauleaux rx200, ipv5, sigelei 200w tc (fuchai?), rx200, any dna200 mod if you can stomach price/battery life (or just get the reauleaux dna200 for best battery life and price for dna200 mod), or the smok r200. The only ones that hit a true 200w without some awful planet aligning circumstances are the tribattery mods like the two reauleauxs. They also fit very well in the hand, seeing as they're kinda closed hand shaped.
Tugboat 24mm with 2post deck and bottom airflow
316l SS 28x2x32 fused Clapton paralleled w/ 24g 316l SS
I built a little to low by mistake and unfortunately it's too much vapor for me even when I lower the wattage however I didn't want to toss the build as it took me forever to wrap the coils and build on this deck as its new to me!!
My thoughts on the new tugboat are that it reminds me a lot of the Kennedy 24 with a smidgen more airflow and a 2 post deck amazing flavor and insane vapor it's definitely one of my new fave RDAs
Tugboat 24mm with 2post deck and bottom airflow
316l SS 28x2x32 fused Clapton paralleled w/ 24g 316l SS
I built a little to low by mistake and unfortunately it's too much vapor for me even when I lower the wattage however I didn't want to toss the build as it took me forever to wrap the coils and build on this deck as its new to me!!
My thoughts on the new tugboat are that it reminds me a lot of the Kennedy 24 with a smidgen more airflow and a 2 post deck amazing flavor and insane vapor it's definitely one of my new fave RDAs
I decided to just jump on the RDA train. Grabbed myself a Hunter UD.
Building on it is much different from my griffin, screwed it up a little as you can see. But hey it works and I'm fairly happy with it.Show Image(http://i.imgur.com/Fb8OISF.jpg)Show Image(http://i.imgur.com/wMhS1TI.jpg)
It chucks that is for sure. This actually lead to my first head rush in years. Last time I got a head rush like that was my first cigarette about eleven years ago. So I guess I like it?
I decided to just jump on the RDA train. Grabbed myself a Hunter UD.
Building on it is much different from my griffin, screwed it up a little as you can see. But hey it works and I'm fairly happy with it.Show Image(http://i.imgur.com/Fb8OISF.jpg)Show Image(http://i.imgur.com/wMhS1TI.jpg)
It chucks that is for sure. This actually lead to my first head rush in years. Last time I got a head rush like that was my first cigarette about eleven years ago. So I guess I like it?
Looks like your right coil is getting much hotter than your left one.
What's the resistance/build on that btw?
I decided to just jump on the RDA train. Grabbed myself a Hunter UD.
Building on it is much different from my griffin, screwed it up a little as you can see. But hey it works and I'm fairly happy with it.Show Image(http://i.imgur.com/Fb8OISF.jpg)Show Image(http://i.imgur.com/wMhS1TI.jpg)
It chucks that is for sure. This actually lead to my first head rush in years. Last time I got a head rush like that was my first cigarette about eleven years ago. So I guess I like it?
Looks like your right coil is getting much hotter than your left one.
What's the resistance/build on that btw?
Yeah I spent a bit more time messing with it after that picture, they seemed to glow more evenly though it always seems to me that in whatever I build one coil always heats up faster than the other.
Bare with me but resistance? It's a 0.29 Ohm as for what volts gets put into it, I have no idea probably 5.5 I usually run at 85-90 watts. This little build seemed quite happy with it.
I decided to just jump on the RDA train. Grabbed myself a Hunter UD.
Building on it is much different from my griffin, screwed it up a little as you can see. But hey it works and I'm fairly happy with it.Show Image(http://i.imgur.com/Fb8OISF.jpg)Show Image(http://i.imgur.com/wMhS1TI.jpg)
It chucks that is for sure. This actually lead to my first head rush in years. Last time I got a head rush like that was my first cigarette about eleven years ago. So I guess I like it?
Looks like your right coil is getting much hotter than your left one.
What's the resistance/build on that btw?
Yeah I spent a bit more time messing with it after that picture, they seemed to glow more evenly though it always seems to me that in whatever I build one coil always heats up faster than the other.
Bare with me but resistance? It's a 0.29 Ohm as for what volts gets put into it, I have no idea probably 5.5 I usually run at 85-90 watts. This little build seemed quite happy with it.
Ahh, yes. More practice with the coils and you'll have them firing pretty evenly. I have this (http://www.amazon.com/Coil-Master-Authenticity-Scratch-Code/dp/B00UTZMYAK) coil jig and it works wonders. Use it for everything from standard builds to claptons. Well worth the few bucks.
And yea, the 0.29 Ohm is the resistance. Ohm (https://en.wikipedia.org/wiki/Ohm) is the measurement commonly used for electrical resistance. Thanks for the details.
I decided to just jump on the RDA train. Grabbed myself a Hunter UD.
Building on it is much different from my griffin, screwed it up a little as you can see. But hey it works and I'm fairly happy with it.Show Image(http://i.imgur.com/Fb8OISF.jpg)Show Image(http://i.imgur.com/wMhS1TI.jpg)
It chucks that is for sure. This actually lead to my first head rush in years. Last time I got a head rush like that was my first cigarette about eleven years ago. So I guess I like it?
Looks like your right coil is getting much hotter than your left one.
What's the resistance/build on that btw?
Yeah I spent a bit more time messing with it after that picture, they seemed to glow more evenly though it always seems to me that in whatever I build one coil always heats up faster than the other.
Bare with me but resistance? It's a 0.29 Ohm as for what volts gets put into it, I have no idea probably 5.5 I usually run at 85-90 watts. This little build seemed quite happy with it.
Ahh, yes. More practice with the coils and you'll have them firing pretty evenly. I have this (http://www.amazon.com/Coil-Master-Authenticity-Scratch-Code/dp/B00UTZMYAK) coil jig and it works wonders. Use it for everything from standard builds to claptons. Well worth the few bucks.
And yea, the 0.29 Ohm is the resistance. Ohm (https://en.wikipedia.org/wiki/Ohm) is the measurement commonly used for electrical resistance. Thanks for the details.
Hey thanks, yeah I have a "Coiler" though for what it is it is very over priced. That right coil got a little screwed up because I tried to pinch it back together. The Jig you linked looks much better than the one I have. Might have to grab it.
I'm starting to have a large amount of vape gear though, I really need a case for my tools and a compact means to store my extra stuff :P
I picked up the Sigelei Moonshot RDTA today, I love it so far. No complaints, other than it's a little more complicated to build on than a regular RDA. To be expected though, and it's not really difficult, pretty spacious.
I definitely recommend it so far. :)
If there was one thing I'd change about it, it would be the stock wide bore drip tip. It's plenty wide, but too short for me. It also functions as a standard 510 drip tip adapter though, and I popped a regular one on top, and it's great. Normally I don't like using a 510 drip tip (too narrow for dripping), but I won't be dripping through this one, so it's perfect.
Edit: After further time, it's even better. Wicks great at .4 ohms 24g 10 wraps dual coil. No dry hits even with heavy chain vaping, and great flavour/vapour production. The short widebore drip tip gets kinda hot though, so I'm sticking with a jade 510 tip instead.
WAY better than I was expecting it to be, to be honest. I thought it wouldn't beat my Lush RDA, but it does.Show Image(http://www.directvapor.com/media/catalog/product/cache/28/thumbnail/600x600/9df78eab33525d08d6e5fb8d27136e95/m/o/moonshot-sigelei-directvapor_1.png)
I picked up the Sigelei Moonshot RDTA today, I love it so far. No complaints, other than it's a little more complicated to build on than a regular RDA. To be expected though, and it's not really difficult, pretty spacious.
I definitely recommend it so far. :)
If there was one thing I'd change about it, it would be the stock wide bore drip tip. It's plenty wide, but too short for me. It also functions as a standard 510 drip tip adapter though, and I popped a regular one on top, and it's great. Normally I don't like using a 510 drip tip (too narrow for dripping), but I won't be dripping through this one, so it's perfect.
Edit: After further time, it's even better. Wicks great at .4 ohms 24g 10 wraps dual coil. No dry hits even with heavy chain vaping, and great flavour/vapour production. The short widebore drip tip gets kinda hot though, so I'm sticking with a jade 510 tip instead.
WAY better than I was expecting it to be, to be honest. I thought it wouldn't beat my Lush RDA, but it does.Show Image(http://www.directvapor.com/media/catalog/product/cache/28/thumbnail/600x600/9df78eab33525d08d6e5fb8d27136e95/m/o/moonshot-sigelei-directvapor_1.png)
I love my Lush! I've got another RDA with a pretty similar deck to that Moonshot, the Hannya (https://101vape.com/rba-s-rda-s/780-hannya-postless-rda-by-blitz-enterprises.html) and I really do like the postless design, but the wells are so shallow which means it doesn't hold as much juice as I'd like without risking it dripping out.
I picked up the Sigelei Moonshot RDTA today, I love it so far. No complaints, other than it's a little more complicated to build on than a regular RDA. To be expected though, and it's not really difficult, pretty spacious.
I definitely recommend it so far. :)
If there was one thing I'd change about it, it would be the stock wide bore drip tip. It's plenty wide, but too short for me. It also functions as a standard 510 drip tip adapter though, and I popped a regular one on top, and it's great. Normally I don't like using a 510 drip tip (too narrow for dripping), but I won't be dripping through this one, so it's perfect.
Edit: After further time, it's even better. Wicks great at .4 ohms 24g 10 wraps dual coil. No dry hits even with heavy chain vaping, and great flavour/vapour production. The short widebore drip tip gets kinda hot though, so I'm sticking with a jade 510 tip instead.
WAY better than I was expecting it to be, to be honest. I thought it wouldn't beat my Lush RDA, but it does.Show Image(http://www.directvapor.com/media/catalog/product/cache/28/thumbnail/600x600/9df78eab33525d08d6e5fb8d27136e95/m/o/moonshot-sigelei-directvapor_1.png)
I love my Lush! I've got another RDA with a pretty similar deck to that Moonshot, the Hannya (https://101vape.com/rba-s-rda-s/780-hannya-postless-rda-by-blitz-enterprises.html) and I really do like the postless design, but the wells are so shallow which means it doesn't hold as much juice as I'd like without risking it dripping out.
Juice wells aren't really an issue with the Moonshot, as it's got a tank on the outside. You can drip, but you have to be careful because the airflow holes are directly beneath the coils. I accidentally overdripped once, and most of it came out of the bottom. So it's a good thing the tank works so well on it! It only holds 2ml, but it's enough for me to chain vape on it for a few hours. Much better in the car than a standard RDA. :)
I agree, the Lush is awesome. Really well designed. I have the Wotofo Freakshow as well. Not quite as good, but still pretty nice.
**** MBV.
I let this **** steep for even longer than they told me to.
It still tastes and burns like rubbing alcohol.
Going to try some 15ml from a mess of places you guys suggested. Gonna cost me, but I can't be having this garbage push me right back to cigs.
**** MBV.
I let this **** steep for even longer than they told me to.
It still tastes and burns like rubbing alcohol.
Going to try some 15ml from a mess of places you guys suggested. Gonna cost me, but I can't be having this garbage push me right back to cigs.
Vape commandment #2: Never buy juice you can't try before buying.
**** MBV.
I let this **** steep for even longer than they told me to.
It still tastes and burns like rubbing alcohol.
Going to try some 15ml from a mess of places you guys suggested. Gonna cost me, but I can't be having this garbage push me right back to cigs.
Vape commandment #2: Never buy juice you can't try before buying.
your petri looks amazing 8) not to mention how sexy it looks on the hex ohm !**** MBV.
I let this **** steep for even longer than they told me to.
It still tastes and burns like rubbing alcohol.
Going to try some 15ml from a mess of places you guys suggested. Gonna cost me, but I can't be having this garbage push me right back to cigs.
Vape commandment #2: Never buy juice you can't try before buying.
So true, I picked up a bottle of Charlie's mustache milk thinking it would taste like suicide bunny mothers milk and it ended up tasting like flawless game over grossness.
Someone please recommend a flavor similar to OG mothers milk prior to the recipe change
Bonus photo!Show Image(http://i.imgur.com/1C0YGzG.jpg)
Gift from my vape savior
Walked into the vape shop today to hang out and pick up some juice and as I was talking to some dude about wanting a reuleaux rx200 one of his buddies walked in for a new mod and sold me his for cheap. It's my first regulated mod and so far I love it.
Walked into the vape shop today to hang out and pick up some juice and as I was talking to some dude about wanting a reuleaux rx200 one of his buddies walked in for a new mod and sold me his for cheap. It's my first regulated mod and so far I love it.
Walked into the vape shop today to hang out and pick up some juice and as I was talking to some dude about wanting a reuleaux rx200 one of his buddies walked in for a new mod and sold me his for cheap. It's my first regulated mod and so far I love it.
One of us, one of us.
Speaking of reuleaux, my white/cyan's 510 connector collapsed last night. Fortunately, I had a spare fat daddy 510 and was able to swap it out. It's not a 1:1 swap, you have to drill out the case and dremel the back side of the battery sled, but it's doable and not a terrible task to complete. It even looks aiight.
Walked into the vape shop today to hang out and pick up some juice and as I was talking to some dude about wanting a reuleaux rx200 one of his buddies walked in for a new mod and sold me his for cheap. It's my first regulated mod and so far I love it.
One of us, one of us.
Speaking of reuleaux, my white/cyan's 510 connector collapsed last night. Fortunately, I had a spare fat daddy 510 and was able to swap it out. It's not a 1:1 swap, you have to drill out the case and dremel the back side of the battery sled, but it's doable and not a terrible task to complete. It even looks aiight.
i tried to do this 2 weeks ago, i didnt desolder the battery sled and ripped out the connection...
Walked into the vape shop today to hang out and pick up some juice and as I was talking to some dude about wanting a reuleaux rx200 one of his buddies walked in for a new mod and sold me his for cheap. It's my first regulated mod and so far I love it.
One of us, one of us.
Speaking of reuleaux, my white/cyan's 510 connector collapsed last night. Fortunately, I had a spare fat daddy 510 and was able to swap it out. It's not a 1:1 swap, you have to drill out the case and dremel the back side of the battery sled, but it's doable and not a terrible task to complete. It even looks aiight.
What part of it collapsed? Was it the spring loaded section?
I've had to do work on the 510 in my tugboat so any issues shouldn't be too bad.
Walked into the vape shop today to hang out and pick up some juice and as I was talking to some dude about wanting a reuleaux rx200 one of his buddies walked in for a new mod and sold me his for cheap. It's my first regulated mod and so far I love it.
One of us, one of us.
Speaking of reuleaux, my white/cyan's 510 connector collapsed last night. Fortunately, I had a spare fat daddy 510 and was able to swap it out. It's not a 1:1 swap, you have to drill out the case and dremel the back side of the battery sled, but it's doable and not a terrible task to complete. It even looks aiight.
i tried to do this 2 weeks ago, i didnt desolder the battery sled and ripped out the connection...
Walked into the vape shop today to hang out and pick up some juice and as I was talking to some dude about wanting a reuleaux rx200 one of his buddies walked in for a new mod and sold me his for cheap. It's my first regulated mod and so far I love it.
One of us, one of us.
Speaking of reuleaux, my white/cyan's 510 connector collapsed last night. Fortunately, I had a spare fat daddy 510 and was able to swap it out. It's not a 1:1 swap, you have to drill out the case and dremel the back side of the battery sled, but it's doable and not a terrible task to complete. It even looks aiight.
What part of it collapsed? Was it the spring loaded section?
I've had to do work on the 510 in my tugboat so any issues shouldn't be too bad.
The overall depth of the 510 is shorter than most devices, so you can run the risk of pushing the firing pin under the delrin insulator around it. Only reason I had to change mine is I was cleaning excess juice from dripping and saw it had got caught up. If you keep the one thing on it, you should be ok.
My TugBox's 510 died just 2 weeks out of its 90 day warranty which blows, have to send it back to them and just hope it doesnt cost much to fix.
My TugBox's 510 died just 2 weeks out of its 90 day warranty which blows, have to send it back to them and just hope it doesnt cost much to fix.
What happened to the tugboat's 510? Mine has failed in several places and I've pulled off a fix every time. If you have pics I'd be happy to take a look at it. Mine looks haggard (on the inside) and is held together with red loctite but it fires the same as it did brand new.
Edit: The failures I've had are the positive wire falling out because the entire joint was cold soldered and the bottom of the 510 (the press fit cap) falling out a few times. The press fit part kept happening until the fit was so loose that the box wouldn't fire so I used a dab of red loctite and it's been 100% since then. The the cold solder joint was fixed by removing the old solder and redoing the joint.
I guess I'm just good at buying boxes with bad 510s. :))
(Attachment Link)
My TugBox's 510 died just 2 weeks out of its 90 day warranty which blows, have to send it back to them and just hope it doesnt cost much to fix.
What happened to the tugboat's 510? Mine has failed in several places and I've pulled off a fix every time. If you have pics I'd be happy to take a look at it. Mine looks haggard (on the inside) and is held together with red loctite but it fires the same as it did brand new.
Edit: The failures I've had are the positive wire falling out because the entire joint was cold soldered and the bottom of the 510 (the press fit cap) falling out a few times. The press fit part kept happening until the fit was so loose that the box wouldn't fire so I used a dab of red loctite and it's been 100% since then. The the cold solder joint was fixed by removing the old solder and redoing the joint.
I guess I'm just good at buying boxes with bad 510s. :))
(Attachment Link)
It isn't a screw, it's a press fit hex cap on the end of a threaded cylinder. Try pulling it off and using a little dab of red loctite to hold it on. Had to do a little disassembly to do it but it wasn't hard.My TugBox's 510 died just 2 weeks out of its 90 day warranty which blows, have to send it back to them and just hope it doesnt cost much to fix.
What happened to the tugboat's 510? Mine has failed in several places and I've pulled off a fix every time. If you have pics I'd be happy to take a look at it. Mine looks haggard (on the inside) and is held together with red loctite but it fires the same as it did brand new.
Edit: The failures I've had are the positive wire falling out because the entire joint was cold soldered and the bottom of the 510 (the press fit cap) falling out a few times. The press fit part kept happening until the fit was so loose that the box wouldn't fire so I used a dab of red loctite and it's been 100% since then. The the cold solder joint was fixed by removing the old solder and redoing the joint.
I guess I'm just good at buying boxes with bad 510s. :))
(Attachment Link)
Right where your sticky note is, the nut came off/loose so the center pin just freely moves up and down and i've tried 100x to screw it back down.
Have they figured out RTA's yet? I want a simple, easy to build and reliable single coil tank. No leaks. Juicy tokes.. no dry hits. Etc.
Have the vape geniuses done it yet?
Have they figured out RTA's yet? I want a simple, easy to build and reliable single coil tank. No leaks. Juicy tokes.. no dry hits. Etc.
Have the vape geniuses done it yet?
It isn't a screw, it's a press fit hex cap on the end of a threaded cylinder. Try pulling it off and using a little dab of red loctite to hold it on. Had to do a little disassembly to do it but it wasn't hard.My TugBox's 510 died just 2 weeks out of its 90 day warranty which blows, have to send it back to them and just hope it doesnt cost much to fix.
What happened to the tugboat's 510? Mine has failed in several places and I've pulled off a fix every time. If you have pics I'd be happy to take a look at it. Mine looks haggard (on the inside) and is held together with red loctite but it fires the same as it did brand new.
Edit: The failures I've had are the positive wire falling out because the entire joint was cold soldered and the bottom of the 510 (the press fit cap) falling out a few times. The press fit part kept happening until the fit was so loose that the box wouldn't fire so I used a dab of red loctite and it's been 100% since then. The the cold solder joint was fixed by removing the old solder and redoing the joint.
I guess I'm just good at buying boxes with bad 510s. :))
(Attachment Link)
Right where your sticky note is, the nut came off/loose so the center pin just freely moves up and down and i've tried 100x to screw it back down.
Supposedly, there's a few. The billow v2, griffin and moonshot. I don't know first hand though because I've never really taken to rtas. I came to see if someone would be able to talk me into getting a moonshot today, honestly. I figure punksdead or sed8 have them and will tell me exactly how good they are soon
Red loctite, can i find that at like home depot?
Wotofo Serpent is amazig and one of my favorite rtas its a bit quirky to build in but once you figure it out its easy ! Also the ehpro bachelor is also an amazing single coil RTA much easier to build in but i dont like the looks as muchHave they figured out RTA's yet? I want a simple, easy to build and reliable single coil tank. No leaks. Juicy tokes.. no dry hits. Etc.
Have the vape geniuses done it yet?
Single Coil?
Wotofo Serpent, ****ing amazing. Love that thing.
Wotofo Serpent is amazig and one of my favorite rtas its a bit quirky to build in but once you figure it out its easy ! Also the ehpro bachelor is also an amazing single coil RTA much easier to build in but i dont like the looks as muchHave they figured out RTA's yet? I want a simple, easy to build and reliable single coil tank. No leaks. Juicy tokes.. no dry hits. Etc.
Have the vape geniuses done it yet?
Single Coil?
Wotofo Serpent, ****ing amazing. Love that thing.
Augvape boreas is hands down the best RTA I have ever used !!!!! I am in heaven right now
I love my moonshot also the flavor is amazing 8) ....!!!Augvape boreas is hands down the best RTA I have ever used !!!!! I am in heaven right now
Was about to say the same thing about the moonshot I got yesterday :/
I love my moonshot also the flavor is amazing 8) ....!!!Augvape boreas is hands down the best RTA I have ever used !!!!! I am in heaven right now
Was about to say the same thing about the moonshot I got yesterday :/
I got the boreas and Supreme over the weekend and they are amazing RTAs ! The best I have vaped they really are a HUGE step in the right direction for The industry
Alright moonshot lovers, i have a question for you. What builds are you running, and how are you wicking it?
I was running some fused nichrome claptons and wicked it the sigelei suggested way where you pull you cotton through and then put the ring on and just trim it and tuck it in.
I primed it, put it together, filled the tank and let it sit for a bit. Went to vape it and.... just cotton flavor, like moist cotton. Little to no flavor.
Im going to try it again tonight wicking it more normal like i would with a traditional RTA, and maybe just use some basic***** round wire build.
How much juice do people go through a day? I go through about a unicorn bottle and a bit more, so about 30-40mL. I use concentrates and mix my own juice so its not the biggest problem, I am just curious
How much juice do people go through a day? I go through about a unicorn bottle and a bit more, so about 30-40mL. I use concentrates and mix my own juice so its not the biggest problem, I am just curious
depends on my set up of the day. MTL set up? 4-5mls. Tank set up 10mls. dripping, 15-20.
6x.5mm ribbon framed with 26g and wrapped with 40g kanthal ohms out to .09 so I have to use it on a mech or my dna but its an amazing vape mmmmhhhmm
it takes me about 35-45 minutes to wrap about 12 inches of wire but I need to buy new tools and I should be able to spit it out faster6x.5mm ribbon framed with 26g and wrapped with 40g kanthal ohms out to .09 so I have to use it on a mech or my dna but its an amazing vape mmmmhhhmm
Good lord, that's beautiful! How long did it take you to wrap that?
it takes me about 35-45 minutes to wrap about 12 inches of wire but I need to buy new tools and I should be able to spit it out faster6x.5mm ribbon framed with 26g and wrapped with 40g kanthal ohms out to .09 so I have to use it on a mech or my dna but its an amazing vape mmmmhhhmm
Good lord, that's beautiful! How long did it take you to wrap that?
6x.5mm ribbon framed with 26g and wrapped with 40g kanthal framed staple clapton it ohms out to .09 so I have to use it on a mech or my dna but its an amazing vape mmmmhhhmm
dotmod petri v26x.5mm ribbon framed with 26g and wrapped with 40g kanthal framed staple clapton it ohms out to .09 so I have to use it on a mech or my dna but its an amazing vape mmmmhhhmm
Damn, nice job, what atty is that?
dotmod petri v26x.5mm ribbon framed with 26g and wrapped with 40g kanthal framed staple clapton it ohms out to .09 so I have to use it on a mech or my dna but its an amazing vape mmmmhhhmm
Damn, nice job, what atty is that?
the Goldie is a traditional four post so it would be out of the choice for me however grimmgreen said it produces a decent vape. The TM squared is a great little Atty with a strange 2 post design that almost looks like a 4 post. However it works fantastic it also has a design that lends itself to high airflow and big builds which in turn means big cloudsdotmod petri v26x.5mm ribbon framed with 26g and wrapped with 40g kanthal framed staple clapton it ohms out to .09 so I have to use it on a mech or my dna but its an amazing vape mmmmhhhmm
Damn, nice job, what atty is that?
The petri looks so nice, Im trying to decide on a new RDA. but i cant pick between the Petri, BMI Goldie or a Twisted Messes2
So I am thinking about getting into more advanced wire builds, does claptoned wire actually make a difference too flavour? I mean, I can understand the capillary effect and wicking, but does it make a difference to flavour? Regardless I am going to build some because, dank photos, but I am curious to people's opinions on what side effects it has
Thinking about picking up a Griffin RTA, any suggestions where to pick one up? Preferred within EU
Looks really nice and Im getting sick of my Subtank mini haha
Thinking about picking up a Griffin RTA, any suggestions where to pick one up? Preferred within EU
Looks really nice and Im getting sick of my Subtank mini haha
wait for the 25mm version, its about to drop
So got the tsunami in the about a week ago and it was covered in machine oil out of then package(more then I have ever seen before) some of the threads had burrs and I found the deck super cramped when trying to use even a normal amount of cotton. Besides the negatives it does vape well ! However the hype for me will be the tsunami 24 which is what size it should have been from The get go
Unrelated, is it worth investing in any of the branded non Samsung 18650 batteries? Keep buying a few batteries a year from fasttech and they work fairly well so far
Unrelated, is it worth investing in any of the branded non Samsung 18650 batteries? Keep buying a few batteries a year from fasttech and they work fairly well so far
With prices so cheap at Illum (http://www.illumn.com/), I don't see a reason to get anything but legit LG, Samsung or Sony batteries - too many rewraps & shady sellers out there.
Mooch does great testing and maintains a list (https://www.e-cigarette-forum.com/forum/blog-entry/list-of-battery-tests.7436/#subs) so you can check out performance for any given battery (assuming you know what's actually under the wrap). A lot of the off-brand batteries are garbage with greatly exaggerated amperage ratings.
3x28g n80 aliened with 38g n80
Ohms out .17
Dual 2.5mm ID 5wraps on my hobo drifter
Unrelated, is it worth investing in any of the branded non Samsung 18650 batteries? Keep buying a few batteries a year from fasttech and they work fairly well so far
With prices so cheap at Illum (http://www.illumn.com/), I don't see a reason to get anything but legit LG, Samsung or Sony batteries - too many rewraps & shady sellers out there.
Mooch does great testing and maintains a list (https://www.e-cigarette-forum.com/forum/blog-entry/list-of-battery-tests.7436/#subs) so you can check out performance for any given battery (assuming you know what's actually under the wrap). A lot of the off-brand batteries are garbage with greatly exaggerated amperage ratings.
This pretty much sums it up. I wouldn't trust anything other than legit Sony/LG/Samsungs. I've got a 0.17 ohm build on my mech, so I pretty much need to use Sony VTC's on it due to the high amount current needed.
Unrelated, is it worth investing in any of the branded non Samsung 18650 batteries? Keep buying a few batteries a year from fasttech and they work fairly well so far
With prices so cheap at Illum (http://www.illumn.com/), I don't see a reason to get anything but legit LG, Samsung or Sony batteries - too many rewraps & shady sellers out there.
Mooch does great testing and maintains a list (https://www.e-cigarette-forum.com/forum/blog-entry/list-of-battery-tests.7436/#subs) so you can check out performance for any given battery (assuming you know what's actually under the wrap). A lot of the off-brand batteries are garbage with greatly exaggerated amperage ratings.
This pretty much sums it up. I wouldn't trust anything other than legit Sony/LG/Samsungs. I've got a 0.17 ohm build on my mech, so I pretty much need to use Sony VTC's on it due to the high amount current needed.
yeah man if your using hybrid mechs dont play with anything other than legit sellers i poersonally use (RTDvapor). I have a ton of amazon gift cards so i always get MXJO's but would never run them in a hybrid. they arent terrible almost like lgh2's but i trust them over ordering samsungs/sonys/lg's from amazon
3x28g n80 aliened with 38g n80Dats hawt! You should be posting on /r/coilporn too :thumb: You ever sell any of those fancy alien coils?
Ohms out .17
Dual 2.5mm ID 5wraps on my hobo drifter
anyone looking for a authentic USA made flavor atty, check out 101vape.com. They are selling authentic 454 Big Blocks for 10$ right now!
https://101vape.com/rba-s-rda-s/1047-454-big-block-by-kryptonite-vapor.html?search_query=454&results=2
Picked up one plus a nugget mod, for a super cheap price.
I'm writing up a review for one right now and its a nice vape and if you liked the original you will love this. Very similar design with a few SMALL positive changes. My only issue with it is the price tag I feel avid could have put it out cheaper.
In other vaping news I have the goon 24 coming in as well as the Uwell Rafale X RDA which looks trvokutionary (this thing could either be freaking amazing or just plain stupid)
Claptoned coils are so good, they wick really well and take a long time to gunk up. Definitely going to be running them a lot more
@sed8 finally got my tsunami...I see your rocking the spaced coils too !!! Don't get me wrong I love all types but spaced has been really easy and producing a beautiful vape so I have been rocking them more and more.
It sucks the special finger wang :(Show Image(http://i.imgur.com/Kzi4xe6.jpg)
As much as I love nicotine I also love flavour and the two do not go together. It's either you have lots of flavour, or nicotine. Does god exist
Damn you vape sites,
Beginning of this year my cc info was stolen after some sketchy vape purchases.
Took some Reddit advice and ordered from another vape company last week. Card stolen again
Damn you zero cool, stop stealing my cc info
Top nominations!
1. Blue dot vapors **** your unsafe site
2. Reddit, if it wasn't for WPD I wouldn't go to you anymore
3. PayPal eat a **** for telling me there's nothing you can do, dispite the fraudulent charges being PayPal accounts
Damn you vape sites,
Beginning of this year my cc info was stolen after some sketchy vape purchases.
Took some Reddit advice and ordered from another vape company last week. Card stolen again
Damn you zero cool, stop stealing my cc info
Top nominations!
1. Blue dot vapors **** your unsafe site
2. Reddit, if it wasn't for WPD I wouldn't go to you anymore
3. PayPal eat a **** for telling me there's nothing you can do, dispite the fraudulent charges being PayPal accounts
Damn you vape sites,
Beginning of this year my cc info was stolen after some sketchy vape purchases.
Took some Reddit advice and ordered from another vape company last week. Card stolen again
Damn you zero cool, stop stealing my cc info
Top nominations!
1. Blue dot vapors **** your unsafe site
2. Reddit, if it wasn't for WPD I wouldn't go to you anymore
3. PayPal eat a **** for telling me there's nothing you can do, dispite the fraudulent charges being PayPal accounts
When a credit cards information is stolen it's normally not sold or used for 6+ months after. So it definitely wasn't a recent purchase that made this happen.
http://www.usatoday.com/story/news/politics/2016/05/05/feds-expected-announce-final-e-cigarette-rule-could-nearly-ban-them/83951786/
Time to start stocking up on ****, 90 days until this bull**** ass law goes into effect.
http://www.usatoday.com/story/news/politics/2016/05/05/feds-expected-announce-final-e-cigarette-rule-could-nearly-ban-them/83951786/
Time to start stocking up on ****, 90 days until this bull**** ass law goes into effect.
Show Image(http://i.imgur.com/g80t6aj.png)
http://www.usatoday.com/story/news/politics/2016/05/05/feds-expected-announce-final-e-cigarette-rule-could-nearly-ban-them/83951786/
Time to start stocking up on ****, 90 days until this bull**** ass law goes into effect.
Well, it sounds like it's about time to start making my own juice
http://www.usatoday.com/story/news/politics/2016/05/05/feds-expected-announce-final-e-cigarette-rule-could-nearly-ban-them/83951786/
Time to start stocking up on ****, 90 days until this bull**** ass law goes into effect.
Well, it sounds like it's about time to start making my own juice
This is my thoughts as well. With as much other stuff that most of the ingredients are used in, the prices for diy supplies shouldn't go up much at all with the exception of nicotine.
Can anyone provide a link for a good site for getting started in making your own juice?
It's been quiet lately here, what's everyone using now?
I'm hooked on RDTAs like the griffin and limitless xl
Show Image(http://i.imgur.com/uu1q9gS.jpg)Show Image(http://i.imgur.com/46rXdqU.jpg)Show Image(http://i.imgur.com/ueTcrbs.jpg)
Any recommendations for a better TC mod than RX200? I don't need all that power either, I limit the output to 28-30w.
Any recommendations for a better TC mod than RX200? I don't need all that power either, I limit the output to 28-30w.
It's been quiet lately here, what's everyone using now?
I'm hooked on RDTAs like the griffin and limitless xl
It's been quiet lately here, what's everyone using now?
I'm hooked on RDTAs like the griffin and limitless xl
Still using my Evic VT with black Crown tank. Though I am considering picking up a Big Baby Beast tank from smok and possibly an Alien 220. Any other dual battery mods you guys could recommend? I don't plan on using a than 45 Watts of so using the X4 coils.
Been vaping on this http://highclassvapeco.com/vapor-liquid/brands/bombshell-by-high-class/bombshell-60ml-marilyn.html (http://highclassvapeco.com/vapor-liquid/brands/bombshell-by-high-class/bombshell-60ml-marilyn.html) my new ADV.Show Image(http://<a href="http://imgur.com/yOmcrfp"><img src="http://i.imgur.com/yOmcrfp.jpg" title="source: imgur.com" /></a>)
All of my friends, who vape in a company of smokers (both of my brothers included), in the end help themselves to a cigarette, because "these pipes aren't quite the same". So my guess is that vaping is only for non-smoking crowds. Or for those with mighty self-control :))
Non-smoker myself, just an observation.
All of my friends, who vape in a company of smokers (both of my brothers included), in the end help themselves to a cigarette, because "these pipes aren't quite the same". So my guess is that vaping is only for non-smoking crowds. Or for those with mighty self-control :))
Non-smoker myself, just an observation.
October will be 4 years without a cigarette for me - vaping definitely made it easy to never go back.All of my friends, who vape in a company of smokers (both of my brothers included), in the end help themselves to a cigarette, because "these pipes aren't quite the same". So my guess is that vaping is only for non-smoking crowds. Or for those with mighty self-control :))
Non-smoker myself, just an observation.
I haven't had a cigarette in over 5 years.
For me vaping did make it easier to quit.
All of my friends, who vape in a company of smokers (both of my brothers included), in the end help themselves to a cigarette, because "these pipes aren't quite the same". So my guess is that vaping is only for non-smoking crowds. Or for those with mighty self-control :))
Non-smoker myself, just an observation.
October will be 4 years without a cigarette for me - vaping definitely made it easy to never go back.All of my friends, who vape in a company of smokers (both of my brothers included), in the end help themselves to a cigarette, because "these pipes aren't quite the same". So my guess is that vaping is only for non-smoking crowds. Or for those with mighty self-control :))
Non-smoker myself, just an observation.
I haven't had a cigarette in over 5 years.
For me vaping did make it easier to quit.
Hey guys I'm using a Smok TFV8 X-Baby Baby Beast Brother and an Alien mod. Love the tank. The paint is all peeling off the mod and it looks kind of ugly now though.Dude my Smok Alien was kind of a POS IMO - put it in a silicon case and the paint sill peeled and looked ****ty af within a month. Dropped it once and the top screws sheared all the (plastic) threads holding things together - straight into the trash.
What's a half way decent sub-ohm mod that is hard wearing enough to sit in a pocket with keys and not get scuffed to bits in a couple of months? I don't typically vape at over 60W or so, so it doesn't need to be 200W or whatever.
Hey guys I'm using a Smok TFV8 X-Baby Baby Beast Brother and an Alien mod. Love the tank. The paint is all peeling off the mod and it looks kind of ugly now though.
What's a half way decent sub-ohm mod that is hard wearing enough to sit in a pocket with keys and not get scuffed to bits in a couple of months? I don't typically vape at over 60W or so, so it doesn't need to be 200W or whatever.
I have been vaping since the beginning like the clearos with the wicks. I have many Mods, RDA,RBA etc. This will blow your mind. I have advanced Parkinson's and a top DR. in the world told me to use a nic patch or vape high nic! It may be why it has not actually "advanced". I am not even close to crippled 8 years later but I am shaky.
Hey friends, I've just started vaping about two weeks ago as i started properly smoking again so I had to stop myself somehow.
I bought myself a Smok T-Priv starter kit from a site in the UK and so far I'm loving it. My only problem I had is my first coil that was included with my kit started to leak, and a friend at work who just bought the same kit had the same problem. I tightened it all up and yet it still leaked, while my spare that was also included didn't. Bit weird.
Anyway, I'm using it at about 40W at the moment even though the coils are meant to be used at between 55 and 65W, so I'm not sure what affect that will have on the coils in the long term. I've been using the same one for two weeks and it's lasted like 4000 puffs or something so I guess it's okay?
I'm finally accepting my fate that i'm a vaper ;)
Hey friends, I've just started vaping about two weeks ago as i started properly smoking again so I had to stop myself somehow.
I bought myself a Smok T-Priv starter kit from a site in the UK and so far I'm loving it. My only problem I had is my first coil that was included with my kit started to leak, and a friend at work who just bought the same kit had the same problem. I tightened it all up and yet it still leaked, while my spare that was also included didn't. Bit weird.
Anyway, I'm using it at about 40W at the moment even though the coils are meant to be used at between 55 and 65W, so I'm not sure what affect that will have on the coils in the long term. I've been using the same one for two weeks and it's lasted like 4000 puffs or something so I guess it's okay?
I'm finally accepting my fate that i'm a vaper ;)
I've notice this happened with a lot of cartridge-based sub-ohm tanks when I first started vaping. Seems to be an inherent problem where the cartridges just can't handle the heat and the seals weaken/deform causing either weeping or straight leaks.
I ended up moving to rebuildables that had good reddit reviews with the least mentions of leaking; many times it's due to human error, so take any review with a grain of salt. I can tell you the Wotofo Serpent mini (direct-lung) and Digiflavor Siren 2 24mm (mouth to lung) are simple to build on, have good flavor output, inexpensive for the quality, and I haven't experienced any leaking that I didn't cause.
So my first proper coil lasted around 5,000 puffs. My second only lasted about 1000. Annoying, but glad I bought three spares.
Might have to look into making my own...
So my first proper coil lasted around 5,000 puffs. My second only lasted about 1000. Annoying, but glad I bought three spares.
Might have to look into making my own...
Sorry, can't really help you with tanks as I only use RDA's. I have one tank, the Eleaf Lemo 2 (http://www.eleafworld.com/lemo2-atomizer/) and it's alright for being a tank. I know a few people that really like theirs.
Sorry, can't really help you with tanks as I only use RDA's. I have one tank, the Eleaf Lemo 2 (http://www.eleafworld.com/lemo2-atomizer/) and it's alright for being a tank. I know a few people that really like theirs.
That's alright, sorry I'm asking so many questions hah.
I'm thinking I might get this -> https://www.gosmokefree.co.uk/tigertek-springer-s-rta-free-delivery/
It's rebuildable and it doesn't look like it's got some stupid **** seal at the top. Now just to work out how to do all those calculations and ****.
Just ordered a nice vape rig, although I reckon it's not the type of vaping this thread is on about.
Semi-ironically paid for completely by my tax return.
https://epicvape.com/product-category/vaporizers/ (https://epicvape.com/product-category/vaporizers/)
So i ended up buying this tank https://www.gosmokefree.co.uk/aspire-revvo-tank-free-e-liquid-free-delivery/
The coil is above the tank so you have to up-end it every so often to re-wet the coil, but it's not leaked and there's no ****ty rubber thing so it's actually been really good so far. I have had to up the Watts to 80 to get any flavour out of it, but it's not harsh at all.Just ordered a nice vape rig, although I reckon it's not the type of vaping this thread is on about.
Semi-ironically paid for completely by my tax return.
https://epicvape.com/product-category/vaporizers/ (https://epicvape.com/product-category/vaporizers/)
Dude, what do those kind of vaporisers actually do?
I was back up to 30 cigs a day. 2 weeks into vaping, I'm down to 3mg nic. Going for 0 very soon.
Think i'm going to have a look at squonk mods soon. I saw a pretty cool Aspire one that uses the same revvo coils i use now, which give me great clouds and great taste. I bought some more batteries a few weeks ago as well because having just two 18650s and charging my mod on a micro USB cable every day sucks.
My older brother tried to quit but I found another vape in his room. I'm genuinely worried about him seeing as his lung collapsed a couple years back (unrelated to vaping [I hope]) anyone got any recommendations for helping him quit? I know that the biggest part of kicking an addiction is staying clean, and I don't see him often enough to keep him off it, but any advice would help.
I appreciate the input! He's tried to go cold turkey straight to the herbal ones but ended up back to normal nicotine vapes. I'll try suggesting cutting the nicotine levels, that may work better.My older brother tried to quit but I found another vape in his room. I'm genuinely worried about him seeing as his lung collapsed a couple years back (unrelated to vaping [I hope]) anyone got any recommendations for helping him quit? I know that the biggest part of kicking an addiction is staying clean, and I don't see him often enough to keep him off it, but any advice would help.
I'm not two well verse in how to get people to stop, but I feel that slowly lowering the nicotine content of vapes could help reduce the nicotine dependency he may have, it is a slow way of doing (there really is no way to quit something quickly like that) but that might work for him
If that works than one thing that I heard can help stick with quitting, is getting no nicotine vapes or herbal cigarettes once someone has lowered their dependency on nicotine, I've heard that sometime people get the urge to put a vape/cigarette in their mouth as a habit, so these ones won't give nicotine and may lead the person to realize that no dopamine hit happens and lose the habit.
Again I'm not too well versed in this (and it's probably not very well written) but I hope this may help. Hope your brother is doing ok
With regard to nicotine, I thought that patches were generally considered the best route.I don't even know if he's tried the patches, but I'll bring it up with him.