Author Topic: Free stuff! Pay it forward!  (Read 14234350 times)

0 Members and 1 Guest are viewing this topic.

Offline pepijndevos

  • Trade Count: (0)
  • Posts: 42
  • Location: Netherlands
Re: Free stuff! Pay it forward!
« Reply #6550 on: Sun, 06 May 2018, 05:09:19 »
Can I interest any one in a Truly Ergonomic 207?

The layout is nice, but the debouncing is worse than useless.
It's been sitting unused since I got an Atreus years ago (still loving it).
Some keys have double presses, others barely register at all.
I tried most of the stuff on their site, short of bathing it.
I'd try to sell it, but I can't bring myself to burden someone with this trash.
I'd have returned it, but I got it in a group buy.
Maybe you can harvest the switches from it, but I would not trust them.

So fully knowing you're getting trash, I'd be happy to give it to someone.
I'm a broke student, so shipping costs + whatever you can spare is appreciated.

Offline Blaise170

  • * Esteemed Elder
  • Trade Count: (0)
  • Posts: 1332
  • Location: Boston, MA
  • ALPS キーボード
    • XYZ
Re: Free stuff! Pay it forward!
« Reply #6551 on: Mon, 07 May 2018, 09:10:59 »
Good to see this thread finally starting to pick up again. I'll have some more stuff to giveaway soon.
I proxy anything including keyboards (キーボード / 鍵盤), from both Japan (日本) and China (中國). For more information, you may visit my dedicated webpage here: https://www.keyboards.es/proxying.html

View my current and past keyboards here: https://deskthority.net/wiki/User:Blaise170

Offline dragonxx21

  • Trade Count: (0)
  • Posts: 471
Re: Free stuff! Pay it forward!
« Reply #6552 on: Fri, 18 May 2018, 02:03:38 »
Might be a bit of a longshot but I'm looking for a "0" alpha key for a topre board. Maybe this is a good excuse to go buy a new set.
Keyboards Owned:

Realforce Topre 91 Key JIS Profile - Main
CM Quickfire Rapid Blue Switches
IBM Model M in Industrial Shell

Offline biosync

  • Trade Count: (0)
  • Posts: 0
Re: Free stuff! Pay it forward!
« Reply #6553 on: Sun, 03 June 2018, 19:44:47 »
Hi everyone trying my luck here :)

Does anyone have a translucent keycap set?

Offline SpAmRaY

  • NOT a Moderator
  • * Certified Spammer
  • Trade Count: (0)
  • Posts: 14667
  • Location: ¯\(°_o)/¯
  • because reasons.......
Re: Free stuff! Pay it forward!
« Reply #6554 on: Sun, 03 June 2018, 19:52:48 »
Hi everyone trying my luck here :)

Does anyone have a translucent keycap set?
You really expect someone to give you an entire keycap set?

Sent from my KFSUWI using Tapatalk


Offline ag36

  • Trade Count: (1)
  • Posts: 179
  • Location: London, UK
Re: Free stuff! Pay it forward!
« Reply #6555 on: Sun, 03 June 2018, 20:02:34 »
Actually I do, translucent lasered abs set for free by max keyboard. Just forget about it if you want a nicer set.
Model M*5, SSK*4, M13 black*1, Model F XT*1, AT*1 F107*1, Unicomp*1, 3278 *1, Leopold FC750R*2, 980M*2 FC980C*1 Filco majestouch 2 TKL*1, Cooler Master MasterKeys S PBT*1, Uniqey Q100*2, Ducky pocket*1, KBD75*2, KBD19X*2, HHKB pro 2*1, Type-S*1 Topre Realforce RGB*1, 108 all 30g*1, numpad*1, 87U*1 Dell AT101W*2, Alps64*2, V80 matias quiet click*2, Quiet liner *1, WYSE ASCII *1

Offline biosync

  • Trade Count: (0)
  • Posts: 0
Re: Free stuff! Pay it forward!
« Reply #6556 on: Sun, 03 June 2018, 20:26:50 »
Hi everyone trying my luck here :)

Does anyone have a translucent keycap set?
You really expect someone to give you an entire keycap set?

Sent from my KFSUWI using Tapatalk

Actually no, I just really tried my luck here. I’m not really expecting a whole set since beggars can’t be choosers.

Offline Blaise170

  • * Esteemed Elder
  • Trade Count: (0)
  • Posts: 1332
  • Location: Boston, MA
  • ALPS キーボード
    • XYZ
Re: Free stuff! Pay it forward!
« Reply #6557 on: Mon, 04 June 2018, 09:42:07 »
Did you really sign up for the forums just to request free stuff?
I proxy anything including keyboards (キーボード / 鍵盤), from both Japan (日本) and China (中國). For more information, you may visit my dedicated webpage here: https://www.keyboards.es/proxying.html

View my current and past keyboards here: https://deskthority.net/wiki/User:Blaise170

Offline biosync

  • Trade Count: (0)
  • Posts: 0
Re: Free stuff! Pay it forward!
« Reply #6558 on: Mon, 04 June 2018, 16:24:00 »
Did you really sign up for the forums just to request free stuff?

Nope, I signed up here to have access to more artisans and to broaden my knowledge about mechkeyboards. I just thought that there are more members here than r/mechmarket and r/mechanicalkeyboards.

I didn't sign up for free stuff.

Offline romevi

  • Formerly romevi
  • * Exalted Elder
  • Trade Count: (0)
  • Posts: 8941
  • Location: The Windy City
Re: Free stuff! Pay it forward!
« Reply #6559 on: Mon, 04 June 2018, 16:28:02 »
Did you really sign up for the forums just to request free stuff?

Nope, I signed up here to have access to more artisans and to broaden my knowledge about mechkeyboards. I just thought that there are more members here than r/mechmarket and r/mechanicalkeyboards.

I didn't sign up for free stuff.

Welcome to geekhack!

Offline biosync

  • Trade Count: (0)
  • Posts: 0
Re: Free stuff! Pay it forward!
« Reply #6560 on: Mon, 04 June 2018, 16:52:06 »
Did you really sign up for the forums just to request free stuff?

Nope, I signed up here to have access to more artisans and to broaden my knowledge about mechkeyboards. I just thought that there are more members here than r/mechmarket and r/mechanicalkeyboards.

I didn't sign up for free stuff.

Welcome to geekhack!

Thank you Romevi :)

Offline Blaise170

  • * Esteemed Elder
  • Trade Count: (0)
  • Posts: 1332
  • Location: Boston, MA
  • ALPS キーボード
    • XYZ
Re: Free stuff! Pay it forward!
« Reply #6561 on: Fri, 08 June 2018, 11:55:51 »
Free to anyone with at least 50 posts.

I proxy anything including keyboards (キーボード / 鍵盤), from both Japan (日本) and China (中國). For more information, you may visit my dedicated webpage here: https://www.keyboards.es/proxying.html

View my current and past keyboards here: https://deskthority.net/wiki/User:Blaise170

Offline ag36

  • Trade Count: (1)
  • Posts: 179
  • Location: London, UK
Re: Free stuff! Pay it forward!
« Reply #6562 on: Fri, 08 June 2018, 12:05:31 »
Free to anyone with at least 50 posts.

Show Image


What's that keyboard?
Model M*5, SSK*4, M13 black*1, Model F XT*1, AT*1 F107*1, Unicomp*1, 3278 *1, Leopold FC750R*2, 980M*2 FC980C*1 Filco majestouch 2 TKL*1, Cooler Master MasterKeys S PBT*1, Uniqey Q100*2, Ducky pocket*1, KBD75*2, KBD19X*2, HHKB pro 2*1, Type-S*1 Topre Realforce RGB*1, 108 all 30g*1, numpad*1, 87U*1 Dell AT101W*2, Alps64*2, V80 matias quiet click*2, Quiet liner *1, WYSE ASCII *1

Offline Blaise170

  • * Esteemed Elder
  • Trade Count: (0)
  • Posts: 1332
  • Location: Boston, MA
  • ALPS キーボード
    • XYZ
Re: Free stuff! Pay it forward!
« Reply #6563 on: Fri, 08 June 2018, 12:12:25 »
Free to anyone with at least 50 posts.

Show Image


What's that keyboard?

Data911 police car keyboard, Cherry MX Blacks, made by TG3.
I proxy anything including keyboards (キーボード / 鍵盤), from both Japan (日本) and China (中國). For more information, you may visit my dedicated webpage here: https://www.keyboards.es/proxying.html

View my current and past keyboards here: https://deskthority.net/wiki/User:Blaise170

Offline SpAmRaY

  • NOT a Moderator
  • * Certified Spammer
  • Trade Count: (0)
  • Posts: 14667
  • Location: ¯\(°_o)/¯
  • because reasons.......
Re: Free stuff! Pay it forward!
« Reply #6564 on: Fri, 08 June 2018, 18:43:22 »
Free to anyone with at least 50 posts.

Show Image

Can we do multiples of 50 and get more free boards??

Sent from my SM-G930V using Tapatalk


Offline Blaise170

  • * Esteemed Elder
  • Trade Count: (0)
  • Posts: 1332
  • Location: Boston, MA
  • ALPS キーボード
    • XYZ
Re: Free stuff! Pay it forward!
« Reply #6565 on: Fri, 08 June 2018, 20:30:42 »
Sure, why not?  :D
I proxy anything including keyboards (キーボード / 鍵盤), from both Japan (日本) and China (中國). For more information, you may visit my dedicated webpage here: https://www.keyboards.es/proxying.html

View my current and past keyboards here: https://deskthority.net/wiki/User:Blaise170

Offline switchnollie

  • sleever supreme
  • * Exquisite Elder
  • Trade Count: (5)
  • Posts: 1631
  • Location: 白い帽子
  • greyhat co-leader
Re: Free stuff! Pay it forward!
« Reply #6566 on: Wed, 13 June 2018, 23:06:05 »
:cool:


Keyboards: HHKB Pro 1 & OTD 356CL Dark Greyhat Edition, baybee!

Offline kiwi99

  • that's a gnarly dookie
  • Trade Count: (1)
  • Posts: 748
  • Location: Vancouver, BC
  • authentic church of halverson member
Re: Free stuff! Pay it forward!
« Reply #6567 on: Wed, 13 June 2018, 23:10:05 »

Offline romevi

  • Formerly romevi
  • * Exalted Elder
  • Trade Count: (0)
  • Posts: 8941
  • Location: The Windy City
Re: Free stuff! Pay it forward!
« Reply #6568 on: Wed, 13 June 2018, 23:16:22 »
:cool:

Cool, can't wait for swotchsleeves.  :cool:

Offline switchnollie

  • sleever supreme
  • * Exquisite Elder
  • Trade Count: (5)
  • Posts: 1631
  • Location: 白い帽子
  • greyhat co-leader
Re: Free stuff! Pay it forward!
« Reply #6569 on: Wed, 13 June 2018, 23:58:26 »
Cool, can't wait for swotchsleeves.  :cool:



This sleeve is for 60% keyboards, the thin construction is good for HHKB & keeping lint off your board.
Just send me $4 for USPS First Class shipping within CONUS if you want it.

:dogedayum:
« Last Edit: Thu, 14 June 2018, 00:16:35 by switchnollie »


Keyboards: HHKB Pro 1 & OTD 356CL Dark Greyhat Edition, baybee!

Offline Elth

  • Trade Count: (0)
  • Posts: 374
  • Location: California
  • Easy now fuzzy little man peach
Re: Free stuff! Pay it forward!
« Reply #6570 on: Thu, 14 June 2018, 00:07:52 »
Cool, can't wait for swotchsleeves.  :cool:

Show Image


This sleeve is for 60% keyboards, the thin construction is good for HHKB & keeping lint off your board.
Just send me $4 for USPS First Class shipping within CONUS if you want it.
:dogedayum:

PM'd

:dogedayum:
TGR Jane V2 | TGR 910 | TGR Jane CE

Offline romevi

  • Formerly romevi
  • * Exalted Elder
  • Trade Count: (0)
  • Posts: 8941
  • Location: The Windy City
Re: Free stuff! Pay it forward!
« Reply #6571 on: Thu, 14 June 2018, 09:24:56 »
dayum  :eek:

Offline vegs

  • Trade Count: (1)
  • Posts: 648
Re: Free stuff! Pay it forward!
« Reply #6572 on: Thu, 14 June 2018, 12:04:16 »
:dogemischief:
hhkb | hhkb bt | cherry g80-5000 | haus | unikorn se

buy less

Offline Corgiattackkk

  • Trade Count: (0)
  • Posts: 87
  • Location: Antarctica
Re: Free stuff! Pay it forward!
« Reply #6573 on: Tue, 10 July 2018, 19:18:16 »
Sorry for potato quality picture. Does anyone want this random keycap set I got? Front printed caps, light teal and a red esc key. Not sure the manufacturer. Just pay shipping. (can be put in a ziplock for cheaper shipping or sent in box)

Given to Blaise170

199811-0
« Last Edit: Fri, 20 July 2018, 10:10:50 by Corgiattackkk »

Offline romevi

  • Formerly romevi
  • * Exalted Elder
  • Trade Count: (0)
  • Posts: 8941
  • Location: The Windy City
Re: Free stuff! Pay it forward!
« Reply #6574 on: Wed, 11 July 2018, 11:08:31 »
Sorry for potato quality picture. Does anyone want this random keycap set I got? Front printed caps, light teal and a red esc key. Not sure the manufacturer. Just pay shipping. (can be put in a ziplock for cheaper shipping or sent in box)

def totes not pending

(Attachment Link)

How much is shipping from Antarctica to the US?

Offline ejewell89

  • Trade Count: (0)
  • Posts: 750
  • Location: Pennsylvania
  • 4ever Smol
Re: Free stuff! Pay it forward!
« Reply #6575 on: Wed, 11 July 2018, 11:52:08 »
Sorry for potato quality picture. Does anyone want this random keycap set I got? Front printed caps, light teal and a red esc key. Not sure the manufacturer. Just pay shipping. (can be put in a ziplock for cheaper shipping or sent in box)

def totes not pending

(Attachment Link)

How much is shipping from Antarctica to the US?

If you have to ask you can't afford it.
              

Offline romevi

  • Formerly romevi
  • * Exalted Elder
  • Trade Count: (0)
  • Posts: 8941
  • Location: The Windy City
Re: Free stuff! Pay it forward!
« Reply #6576 on: Wed, 11 July 2018, 12:05:10 »
Sorry for potato quality picture. Does anyone want this random keycap set I got? Front printed caps, light teal and a red esc key. Not sure the manufacturer. Just pay shipping. (can be put in a ziplock for cheaper shipping or sent in box)

def totes not pending

(Attachment Link)

How much is shipping from Antarctica to the US?

If you have to ask you can't afford it.


Offline Corgiattackkk

  • Trade Count: (0)
  • Posts: 87
  • Location: Antarctica
Re: Free stuff! Pay it forward!
« Reply #6577 on: Wed, 11 July 2018, 18:17:19 »
Sorry for potato quality picture. Does anyone want this random keycap set I got? Front printed caps, light teal and a red esc key. Not sure the manufacturer. Just pay shipping. (can be put in a ziplock for cheaper shipping or sent in box)

def totes not pending

(Attachment Link)

How much is shipping from Antarctica to the US?

Shipping time and cost depends if it is being sent via an African or European swallow.

Offline ag36

  • Trade Count: (1)
  • Posts: 179
  • Location: London, UK
Re: Free stuff! Pay it forward!
« Reply #6578 on: Fri, 13 July 2018, 20:07:08 »
Cherry G81 MY switch and plate and membrane near new, will be disposed after a month or so please be quick if you want it.
Model M*5, SSK*4, M13 black*1, Model F XT*1, AT*1 F107*1, Unicomp*1, 3278 *1, Leopold FC750R*2, 980M*2 FC980C*1 Filco majestouch 2 TKL*1, Cooler Master MasterKeys S PBT*1, Uniqey Q100*2, Ducky pocket*1, KBD75*2, KBD19X*2, HHKB pro 2*1, Type-S*1 Topre Realforce RGB*1, 108 all 30g*1, numpad*1, 87U*1 Dell AT101W*2, Alps64*2, V80 matias quiet click*2, Quiet liner *1, WYSE ASCII *1

Offline BobCarltheThird

  • Trade Count: (0)
  • Posts: 239
Re: Free stuff! Pay it forward!
« Reply #6579 on: Fri, 13 July 2018, 22:33:23 »
Cherry G81 MY switch and plate and membrane near new, will be disposed after a month or so please be quick if you want it.

What are the keycaps like?
***loads of Vaseline for my meme TMO50 -- Acereconkeys


Offline ag36

  • Trade Count: (1)
  • Posts: 179
  • Location: London, UK
Re: Free stuff! Pay it forward!
« Reply #6580 on: Sat, 14 July 2018, 07:27:41 »
No keycaps,it was used as keycap tray for transporting. I am keeping my OG DS cherry :D
Model M*5, SSK*4, M13 black*1, Model F XT*1, AT*1 F107*1, Unicomp*1, 3278 *1, Leopold FC750R*2, 980M*2 FC980C*1 Filco majestouch 2 TKL*1, Cooler Master MasterKeys S PBT*1, Uniqey Q100*2, Ducky pocket*1, KBD75*2, KBD19X*2, HHKB pro 2*1, Type-S*1 Topre Realforce RGB*1, 108 all 30g*1, numpad*1, 87U*1 Dell AT101W*2, Alps64*2, V80 matias quiet click*2, Quiet liner *1, WYSE ASCII *1

Offline Coreda

  • Trade Count: (0)
  • Posts: 772
Re: Free stuff! Pay it forward!
« Reply #6581 on: Sat, 14 July 2018, 07:57:57 »
I remember gifting a copy of Dark Souls to someone here years ago here but the couple times I checked they hadn't even played it. Wonder if they ever got around to it. Not sure the point otherwise.

Offline ag36

  • Trade Count: (1)
  • Posts: 179
  • Location: London, UK
Re: Free stuff! Pay it forward!
« Reply #6582 on: Sat, 14 July 2018, 08:51:53 »
Sorry for potato quality picture. Does anyone want this random keycap set I got? Front printed caps, light teal and a red esc key. Not sure the manufacturer. Just pay shipping. (can be put in a ziplock for cheaper shipping or sent in box)

def totes not pending

(Attachment Link)

How much is shipping from Antarctica to the US?

Shipping time and cost depends if it is being sent via an African or European swallow.

Are you suggesting coconuts migrate?
« Last Edit: Sat, 14 July 2018, 15:18:46 by ag36 »
Model M*5, SSK*4, M13 black*1, Model F XT*1, AT*1 F107*1, Unicomp*1, 3278 *1, Leopold FC750R*2, 980M*2 FC980C*1 Filco majestouch 2 TKL*1, Cooler Master MasterKeys S PBT*1, Uniqey Q100*2, Ducky pocket*1, KBD75*2, KBD19X*2, HHKB pro 2*1, Type-S*1 Topre Realforce RGB*1, 108 all 30g*1, numpad*1, 87U*1 Dell AT101W*2, Alps64*2, V80 matias quiet click*2, Quiet liner *1, WYSE ASCII *1

Offline RichardTheGr8

  • Trade Count: (0)
  • Posts: 0
Re: Free stuff! Pay it forward!
« Reply #6583 on: Sat, 14 July 2018, 15:02:08 »
Hey everyone i'm just looking to see if anyone has a single 2U left shift. I just built a GK64 and didn't get a cap set that had one. Currently filling it in with 0 Ins key which matches in colour but it ain't great. Failing that would love if anyone could point me to somewhere I could buy a single key.

Offline BobCarltheThird

  • Trade Count: (0)
  • Posts: 239
Re: Free stuff! Pay it forward!
« Reply #6584 on: Sat, 14 July 2018, 19:30:15 »
Hey everyone i'm just looking to see if anyone has a single 2U left shift. I just built a GK64 and didn't get a cap set that had one. Currently filling it in with 0 Ins key which matches in colour but it ain't great. Failing that would love if anyone could point me to somewhere I could buy a single key.

I'm currently learning to make keycaps and plan on making a mold for a 2u shift sometime next week depending on when laser comes in. My success rate is admittedly abysmal so it'll take a while to get running but I'd be happy to send you one for free once everything is going smoothly.
***loads of Vaseline for my meme TMO50 -- Acereconkeys


Offline RichardTheGr8

  • Trade Count: (0)
  • Posts: 0
Re: Free stuff! Pay it forward!
« Reply #6585 on: Sat, 14 July 2018, 19:36:59 »
Hey everyone i'm just looking to see if anyone has a single 2U left shift. I just built a GK64 and didn't get a cap set that had one. Currently filling it in with 0 Ins key which matches in colour but it ain't great. Failing that would love if anyone could point me to somewhere I could buy a single key.

I'm currently learning to make keycaps and plan on making a mold for a 2u shift sometime next week depending on when laser comes in. My success rate is admittedly abysmal so it'll take a while to get running but I'd be happy to send you one for free once everything is going smoothly.

That's very generous! There's a distinct lack of custom caps for different form factors it's a real shame. Think I'm going to paint what I've got now just something plain as a stand in!

Offline Blaise170

  • * Esteemed Elder
  • Trade Count: (0)
  • Posts: 1332
  • Location: Boston, MA
  • ALPS キーボード
    • XYZ
Re: Free stuff! Pay it forward!
« Reply #6586 on: Mon, 16 July 2018, 12:42:13 »
I need a 1.5U key myself, but it's pretty rare to find 1.5U keys that are artisans.
I proxy anything including keyboards (キーボード / 鍵盤), from both Japan (日本) and China (中國). For more information, you may visit my dedicated webpage here: https://www.keyboards.es/proxying.html

View my current and past keyboards here: https://deskthority.net/wiki/User:Blaise170

Offline ejewell89

  • Trade Count: (0)
  • Posts: 750
  • Location: Pennsylvania
  • 4ever Smol
Re: Free stuff! Pay it forward!
« Reply #6587 on: Mon, 16 July 2018, 12:51:17 »
as someone with a topre 2u left shift. I understand your pain. I just recently cast split spacebars for my 910, i think using 2.25 and whatever the size of a split right shift is. i suspect 1.75.

Wish I could help out
              

Offline BobCarltheThird

  • Trade Count: (0)
  • Posts: 239
Re: Free stuff! Pay it forward!
« Reply #6588 on: Mon, 16 July 2018, 22:26:14 »
I need a 1.5U key myself, but it's pretty rare to find 1.5U keys that are artisans.

What profile and row would you need? I might have the mold for it.
***loads of Vaseline for my meme TMO50 -- Acereconkeys


Offline Blaise170

  • * Esteemed Elder
  • Trade Count: (0)
  • Posts: 1332
  • Location: Boston, MA
  • ALPS キーボード
    • XYZ
Re: Free stuff! Pay it forward!
« Reply #6589 on: Tue, 17 July 2018, 01:08:49 »
I need a 1.5U key myself, but it's pretty rare to find 1.5U keys that are artisans.

What profile and row would you need? I might have the mold for it.

Theoretically just OEM profile row 3(?).
I proxy anything including keyboards (キーボード / 鍵盤), from both Japan (日本) and China (中國). For more information, you may visit my dedicated webpage here: https://www.keyboards.es/proxying.html

View my current and past keyboards here: https://deskthority.net/wiki/User:Blaise170

Offline BobCarltheThird

  • Trade Count: (0)
  • Posts: 239
Re: Free stuff! Pay it forward!
« Reply #6590 on: Tue, 17 July 2018, 03:12:24 »
I need a 1.5U key myself, but it's pretty rare to find 1.5U keys that are artisans.

What profile and row would you need? I might have the mold for it.

Theoretically just OEM profile row 3(?).

Unfortunately I don't have the caps I would need to make a mold for that size key :(
***loads of Vaseline for my meme TMO50 -- Acereconkeys


Offline mark201200

  • Trade Count: (0)
  • Posts: 2
Re: Free stuff! Pay it forward!
« Reply #6591 on: Fri, 20 July 2018, 15:20:50 »
Does anyone have a spare Cream Damped? PgDown key on my AEKII died :(
Also, I need a stabilizer for Caps Lock. I still don't know if I lost it or if the AEKII doesn't have stabilized caps lock.

 Thanks :)

Offline Blaise170

  • * Esteemed Elder
  • Trade Count: (0)
  • Posts: 1332
  • Location: Boston, MA
  • ALPS キーボード
    • XYZ
Re: Free stuff! Pay it forward!
« Reply #6592 on: Fri, 20 July 2018, 18:14:14 »
I think I have an extra Matias Quiet Click which is basically the same thing.
I proxy anything including keyboards (キーボード / 鍵盤), from both Japan (日本) and China (中國). For more information, you may visit my dedicated webpage here: https://www.keyboards.es/proxying.html

View my current and past keyboards here: https://deskthority.net/wiki/User:Blaise170

Offline _haru

  • Formerly linuxfanatic
  • Trade Count: (0)
  • Posts: 390
  • Location: Perth, Western Australia
  • Back from the dead
Re: Free stuff! Pay it forward!
« Reply #6593 on: Sun, 22 July 2018, 20:40:05 »
Does anyone have a spare Cream Damped? PgDown key on my AEKII died :(
Also, I need a stabilizer for Caps Lock. I still don't know if I lost it or if the AEKII doesn't have stabilized caps lock.

 Thanks :)

aek doesn't have or need a stab'd caps lock afaik

what country are you in? i can probably get one sent to you for the price of shipping
AMJ60 - 45g MX White | GH60 Rev. C - Ghost Gateron Blacks | DFK101 - Alps SKCM Cream | Filco Majestouch 2 TKL - 62g Vintage MX Ergo Clear

Offline mark201200

  • Trade Count: (0)
  • Posts: 2
Re: Free stuff! Pay it forward!
« Reply #6594 on: Mon, 23 July 2018, 06:11:12 »
I think I have an extra Matias Quiet Click which is basically the same thing.

since you said you had some loose switches to sell here https://deskthority.net/want-to-buy-f56/alps-switches-in-good-condition-t19448.html, maybe you could throw it in along with the other switches, if you can sell them.


aek doesn't have or need a stab'd caps lock afaik

what country are you in? i can probably get one sent to you for the price of shipping

My AEK doesn't have a stabilized caps lock, the plate doesn't have the mounting points for the stabilizer, like the keycap.
On my AEK2, on the other hand, there are mounting points for the stabilizers on both the keycap and the plate. Since it binds a little (I've linearized the switch) I thought that maybe I lost a stabilizer.
I'm from Italy btw.



Offline Blaise170

  • * Esteemed Elder
  • Trade Count: (0)
  • Posts: 1332
  • Location: Boston, MA
  • ALPS キーボード
    • XYZ
Re: Free stuff! Pay it forward!
« Reply #6595 on: Mon, 23 July 2018, 08:08:56 »
I think I have an extra Matias Quiet Click which is basically the same thing.

since you said you had some loose switches to sell here https://deskthority.net/want-to-buy-f56/alps-switches-in-good-condition-t19448.html, maybe you could throw it in along with the other switches, if you can sell them.


aek doesn't have or need a stab'd caps lock afaik

what country are you in? i can probably get one sent to you for the price of shipping

My AEK doesn't have a stabilized caps lock, the plate doesn't have the mounting points for the stabilizer, like the keycap.
On my AEK2, on the other hand, there are mounting points for the stabilizers on both the keycap and the plate. Since it binds a little (I've linearized the switch) I thought that maybe I lost a stabilizer.
I'm from Italy btw.

Oi yeah, still haven't had a chance to get around to that. I've been quite busy with personal life and have a bunch of keyboard stuff on the back burner.
I proxy anything including keyboards (キーボード / 鍵盤), from both Japan (日本) and China (中國). For more information, you may visit my dedicated webpage here: https://www.keyboards.es/proxying.html

View my current and past keyboards here: https://deskthority.net/wiki/User:Blaise170

Offline _haru

  • Formerly linuxfanatic
  • Trade Count: (0)
  • Posts: 390
  • Location: Perth, Western Australia
  • Back from the dead
Re: Free stuff! Pay it forward!
« Reply #6596 on: Mon, 23 July 2018, 09:25:53 »

aek doesn't have or need a stab'd caps lock afaik

what country are you in? i can probably get one sent to you for the price of shipping

My AEK doesn't have a stabilized caps lock, the plate doesn't have the mounting points for the stabilizer, like the keycap.
On my AEK2, on the other hand, there are mounting points for the stabilizers on both the keycap and the plate. Since it binds a little (I've linearized the switch) I thought that maybe I lost a stabilizer.
I'm from Italy btw.

if you can't find one within italy i can source one and letter post it to you for about $3 aud
AMJ60 - 45g MX White | GH60 Rev. C - Ghost Gateron Blacks | DFK101 - Alps SKCM Cream | Filco Majestouch 2 TKL - 62g Vintage MX Ergo Clear

Offline radish

  • Trade Count: (0)
  • Posts: 126
Re: Free stuff! Pay it forward!
« Reply #6597 on: Tue, 24 July 2018, 00:02:14 »
120 switch housings and springs from clears from winkeyless.kr

you pay for shipping.




LZ CP

Offline mark201200

  • Trade Count: (0)
  • Posts: 2
Re: Free stuff! Pay it forward!
« Reply #6598 on: Tue, 24 July 2018, 06:45:15 »
Update: I managed to fix the switch, I just desoldered it and threw the switchplate in the ultrasonic cleaner. It works now! Thanks anyways!

Offline _haru

  • Formerly linuxfanatic
  • Trade Count: (0)
  • Posts: 390
  • Location: Perth, Western Australia
  • Back from the dead
Re: Free stuff! Pay it forward!
« Reply #6599 on: Tue, 24 July 2018, 08:37:32 »
Update: I managed to fix the switch, I just desoldered it and threw the switchplate in the ultrasonic cleaner. It works now! Thanks anyways!

nice one :thumb:
AMJ60 - 45g MX White | GH60 Rev. C - Ghost Gateron Blacks | DFK101 - Alps SKCM Cream | Filco Majestouch 2 TKL - 62g Vintage MX Ergo Clear