[GB] KAT Milkshake + M6-C Milkshake edition

[biip]

Set came early last week, and I am very happy!

KAT is a major contender; for me best of sound and king of texture along with SA. Profile is amazing as well.

Milkshake is such a nice concept, each board likely looks unique because there are so many possibilities. Thanks, biip! <3

Anyone else have issues with the ISO Enter key cap?

Using a stock Ducky One 2 TKL: white Enter works ok, but not perfect perfect (very slight binding). Green Enter has enough binding to make it unusable (on that board). This is the only issue I have with the set.

Thanks for your kind comment.
I really hope  all the customers will be happy in the end after the replacment keys phase.

[bobgr8]

Thanks for your kind comment.
I really hope  all the customers will be happy in the end after the replacment keys phase.

Cheers man! You da best

[andtar2]

Having some pretty major issues with the keycaps I received. They have this dark outline on all of the legends. It makes them look fuzzy at a distance.

https://ibb.co/hF02RBS

This picture shows it even worse. It shows the difference between a key that looks ok (the pipe key) and the others than are so blurry and have this weird dark shadowing effect

https://ibb.co/XFHsDZ8

Is there a way to report these issues and get replacements?

You should send these images to your vendor and ask for replacement.
I really do not think this is how it supposed to be.

[saesh]

Anyone else have issues with the ISO Enter key cap? Both (white and green), when put on stabs, get stuck and do not come up again. My theory is that the stems where the stabs are connected to are bent slightly outwards and create too much friction within the stab. I tried different brands of stabs with the same result. The ANSI Enter does not seem to have this issue. I will test further but this is a serious issue for me right now.

Edit: tried on a different board with the same result. When I place the cap on a table I can spin it effortlessly like humming-top and it spins on the middle stem.

@biip anything I can do?

Small update: Tested with a ISO Enter from GMK 9009 R3 and everything is fine with that key. I am in contact with CandyKeys to find a solution.

[hkhawk]

I am having an issue using this keyset with Durock stabilizers. I have two keyboards both with T1 switches but one has Cherry stabs and the other has Durocks. All my other keysets (GMK etc...) work perfectly on both keyboards but when I put KAT Milkshake on my keyboard with Durock stabilizers, the stabilized keys get stuck and don't return properly. Is this a known issue? Can someone please assist?

EDIT: I have no issues with KAT Milkshake with the Cherry stabs

[maxdrehzahl]

Anyone else have issues with the ISO Enter key cap? Both (white and green), when put on stabs, get stuck and do not come up again. My theory is that the stems where the stabs are connected to are bent slightly outwards and create too much friction within the stab. I tried different brands of stabs with the same result. The ANSI Enter does not seem to have this issue. I will test further but this is a serious issue for me right now.

Edit: tried on a different board with the same result. When I place the cap on a table I can spin it effortlessly like humming-top and it spins on the middle stem.

@biip anything I can do?

Small update: Tested with a ISO Enter from GMK 9009 R3 and everything is fine with that key. I am in contact with CandyKeys to find a solution.

I have exactly the same issue with both ISO Enters, and also contacted Candykeys. Just got a reply, they're aware of the situation and will fix it.

[hkhawk]

Anyone else have issues with the ISO Enter key cap? Both (white and green), when put on stabs, get stuck and do not come up again. My theory is that the stems where the stabs are connected to are bent slightly outwards and create too much friction within the stab. I tried different brands of stabs with the same result. The ANSI Enter does not seem to have this issue. I will test further but this is a serious issue for me right now.

Edit: tried on a different board with the same result. When I place the cap on a table I can spin it effortlessly like humming-top and it spins on the middle stem.

@biip anything I can do?

Small update: Tested with a ISO Enter from GMK 9009 R3 and everything is fine with that key. I am in contact with CandyKeys to find a solution.

I have exactly the same issue with both ISO Enters, and also contacted Candykeys. Just got a reply, they're aware of the situation and will fix it.

As I said above, I'm having the same issue with my ANSI enter

[the_marsbar]

Any news on a second round? Candykeys' website was bombarded (impossible to access) when it was announced that there would be extras...

So they will do a raffle instead it seems. I'm probably not going to join that.

So, a second round would seem to make sense, no?

[marshskitow]

I only guess it was 2000 people f5ing the page at the same page for few extra so yes i agree with you, a second batch would be better.


Envoyé de mon iPhone en utilisant Tapatalk

[ssdt]

Second batch! Second batch! Maybe start an IC? (Pretty, please?)

[ssdt]

Second batch! Second batch! Maybe start an IC? (Pretty, please?)

[tngpq]

Anyone else have issues with the ISO Enter key cap? Both (white and green), when put on stabs, get stuck and do not come up again. My theory is that the stems where the stabs are connected to are bent slightly outwards and create too much friction within the stab. I tried different brands of stabs with the same result. The ANSI Enter does not seem to have this issue. I will test further but this is a serious issue for me right now.

Edit: tried on a different board with the same result. When I place the cap on a table I can spin it effortlessly like humming-top and it spins on the middle stem.

@biip anything I can do?

Small update: Tested with a ISO Enter from GMK 9009 R3 and everything is fine with that key. I am in contact with CandyKeys to find a solution.

I have exactly the same issue with both ISO Enters, and also contacted Candykeys. Just got a reply, they're aware of the situation and will fix it.

As I said above, I'm having the same issue with my ANSI enter

Having similar issue with green ANSI enter on durock stabs. White enter is fine. I haven't tried any other stabs as all my stabs are durock.

[gbenz]

Yes a second round please!

[Mearaz]

Just open up my kits to see that the legends are smudged. WTF? Anyone else got this problem?

[biip]

Just open up my kits to see that the legends are smudged. WTF? Anyone else got this problem?

That's not normal.
Please contact your vendor to get replacement keys

[Mearaz]

Just open up my kits to see that the legends are smudged. WTF? Anyone else got this problem?

That's not normal.
Please contact your vendor to get replacement keys

Thanks, I got the same advice on discord group as well. Already contacted them.

[thirdworldpcgamer]

Some of my keycaps were also smudged. Should I report to the vendor?

[nnkb]

My wearing KAT Milkshake

[nnkb]

Just open up my kits to see that the legends are smudged. WTF? Anyone else got this problem?

Me too.
Where did you contacted?

[Anorexious]

Are we having round 2?

[biip]

Are we having round 2?

That's not planned yet.

[bansheetango]

Any chance for a standalone Cherry profile run? It looked really nice on the NK65, too small a board though.

[ytc7776]

Any chance for a standalone Cherry profile run? It looked really nice on the NK65, too small a board though.

+1 GMK Milkshake Please.

[biip]

Any chance for a standalone Cherry profile run? It looked really nice on the NK65, too small a board though.

That's something I could consider.

[Rafa_n]

MT3 Milkshake would also look really nice imo

[Hell-es]

Epbt 

[Anorexious]

+1 for cherry profile!

[saesh]

Any updates on the replacement of the warped ISO Enter keys?

[foxlive]

If someone is interested, I'm selling a complete set (Alphas + Katakanas + Modifiers + Specialties + Space + Fruits), brand new, never used ! You can check it in Classifieds 

Don't hesitate to pm me

[Gondolindrim]

If someone is interested, I'm selling a complete set (Alphas + Katakanas + Modifiers + Specialties + Space + Fruits), brand new, never used ! You can check it in Classifieds 

Don't hesitate to pm me

PM

[Surnia]

MT3 Milkshake would also look really nice imo

+1! Would love to see weirdos on MT3. Might even reconsider the ergo build to go standard mx again just for the weirdos on the lovely MT3 sculpt. 

[bobgr8]

Any updates on the replacement of the warped ISO Enter keys?

I don't think there are any replacements : (

[saesh]

Any updates on the replacement of the warped ISO Enter keys?

I don't think there are any replacements : (

I hope this is not true. I spent >200€ on this set and without an Enter key this is basically unusable. 

[aterix]

Anyone willing to sell their KAT Milkshake keycaps? I'm bummed that I missed the second GB.

If not, is there a way to stay notified next time it goes up for GB?

[convoliution]

Anyone willing to sell their KAT Milkshake keycaps? I'm bummed that I missed the second GB.

If not, is there a way to stay notified next time it goes up for GB?

You might have better luck finding sellers in the Classifieds subforum or in the MechMarket subreddit (with all the usual disclaimers for community purchases, I bear no responsibility for this recommendation!).

As for staying notified, note that re-runs of keysets in this hobby are not guaranteed, but you might want to join biip's Discord server, which you can find a link for near the bottom of the post for the GMK Parcel group buy.

[FSund]

I just received 2x ISO enters (white and green) out of nowhere. I originally ordered from CandyKeys, but these came directly from China. I never contacted anyone regarding replacements. Perhaps CandyKeys replaced all ISO enter orders?

[bliss]

I just received 2x ISO enters (white and green) out of nowhere. I originally ordered from CandyKeys, but these came directly from China. I never contacted anyone regarding replacements. Perhaps CandyKeys replaced all ISO enter orders?

Same for me, got them out of the blue on Christmas Eve from CK  - very happy about that, since the original pair gives me mild problems; see above. Thanks CandyKeys 

[saesh]

Oh! I hope I get ISO Enter replacements as well. Mine are unusable. 

[depressedkeebs]

you would have to try it, no response would be accurate for how you would feel