[GB] TGR-Jane custom TKL keyboard (COMPLETED)

[filphil]

I just thought about this: what about possible damage during shipping?

That's a very real concern, imo. 

[beehatch]

I just thought about this: what about possible damage during shipping?

That's a very real concern, imo.

Given the prior situation, I hope their standards when it comes to packaging will increase given the amount of money on the line here. There were many great suggestions on how to ship expensive boards in Joey's 456 thread that more than likely got overlooked.

[sethk_]

I just thought about this: what about possible damage during shipping?

That's a very real concern, imo.

Given the prior situation, I hope their standards when it comes to packaging will increase given the amount of money on the line here. There were many great suggestions on how to ship expensive boards in Joey's 456 thread that more than likely got overlooked.

I forget which picture I just recently saw of a great way to package a keyboard, but it was soft cell foam, stacked up, and then a hole cut in about 3/4 of the sheets that were stacked up and glued together, that way it created a case of it. Or those form-fitting foam packs that form when activated. It is pretty easy to package something if you are willing to pay 15$ for shipping materials. It costs a little bit more, but i would rather pay 15$ for a board to come in perfect condition, instead of having to ask for a partial refund when it comes because of damage.

[yuktsi]

I just thought about this: what about possible damage during shipping?

That's a very real concern, imo.

Given the prior situation, I hope their standards when it comes to packaging will increase given the amount of money on the line here. There were many great suggestions on how to ship expensive boards in Joey's 456 thread that more than likely got overlooked.

Do you mean to pack it in small and compact form? Just joking.

What I will do is, I will post photos of how the board will be packed and the buyers will comment. We will come to an agreement on how the board will be packed and shipped. I will not be responsible for any damage during shipping. No more compensating the buyer for the damage caused by the custom office or the courier.

Anyway, I have costed $15 in for packaging. So yeah, all good.

[romevi]

I just thought about this: what about possible damage during shipping?

That's a very real concern, imo.

Given the prior situation, I hope their standards when it comes to packaging will increase given the amount of money on the line here. There were many great suggestions on how to ship expensive boards in Joey's 456 thread that more than likely got overlooked.

Do you mean to pack it in small and compact form? Just joking.

What I will do is, I will post photos of how the board will be packed and the buyers will comment. We will come to an agreement on how the board will be packed and shipped. I will not be responsible for any damage during shipping. No more compensating the buyer for the damage caused by the custom office or the courier.

Anyway, I have costed $15 in for packaging. So yeah, all good.

yuktsi, you're back! Gonna PM you about something.

[E3E]

I just thought about this: what about possible damage during shipping?

That's a very real concern, imo.

Given the prior situation, I hope their standards when it comes to packaging will increase given the amount of money on the line here. There were many great suggestions on how to ship expensive boards in Joey's 456 thread that more than likely got overlooked.

I forget which picture I just recently saw of a great way to package a keyboard, but it was soft cell foam, stacked up, and then a hole cut in about 3/4 of the sheets that were stacked up and glued together, that way it created a case of it. Or those form-fitting foam packs that form when activated. It is pretty easy to package something if you are willing to pay 15$ for shipping materials. It costs a little bit more, but i would rather pay 15$ for a board to come in perfect condition, instead of having to ask for a partial refund when it comes because of damage.

Yep, this is a great way to make custom briefcase-style fitted carrying cases as well. I believe I saw this kind of shipping in the post about JoeyQuinn's 456 having been lost in the mail. It should be very secure!

[uJalled]

Are there any updates on the PCB?

[yuktsi]

Are there any updates on the PCB?

TX87 will be used. I have ordered 25pcs.

[romevi]

Are there any updates on the PCB?

TX87 will be used. I have ordered 25pcs.

Great news!

What are some advantages of the TX87? If we wanted to order an additional PCB, would we get the non-TX87 PCB for the second one?

[yuktsi]

Are there any updates on the PCB?

TX87 will be used. I have ordered 25pcs.

Great news!

What are some advantages of the TX87? If we wanted to order an additional PCB, would we get the non-TX87 PCB for the second one?

Advantage of TX87? 



If you want a non TX87, you can always grab the normal A87u from winkeyless. 

[romevi]

Are there any updates on the PCB?

TX87 will be used. I have ordered 25pcs.

Great news!

What are some advantages of the TX87? If we wanted to order an additional PCB, would we get the non-TX87 PCB for the second one?

Advantage of TX87? 

Show Image

If you want a non TX87, you can always grab the normal A87u from winkeyless.

Holy cow. I'm so stoked and glad I landed this GB!

Went to the Winkeyless store, but all I found are the B.87/R X2 PCBs. Those are the extras I'd purchase if I wanted them, right?
Never mind. Just saw the new yuktsi post below.

[yuktsi]

size=14pt]Update 12/08/2015 [/size]
It has been a long week, at least for me. Here are some updates.

Payment status



If you have problem in making the full payment before the deadline, please pm me. Production will start as soon as everyone is paid.
Depending on the currency exchange, I may include the acrylic diffuser.
So for those haven't paid, please do it ASAP. Hehe Thank you.



Additional plate and pcb

I have ordered some extra PCB and plates. Just fill up the form below if you need some.

http://goo.gl/forms/Ki7GUsyT6Z

Assembly parts and services

Please feel free to PM big god Yongjk

[digi]

Just a friendly heads-up. You might want to hide everyone's email address. 

[yuktsi]

Just a friendly heads-up. You might want to hide everyone's email address. 

removed. sorry.

[filphil]

Are there going to be any components presoldered?

[uJalled]

holy smokes, acrylic diffuser looks great. is there a guide on how LEDs work on keyboards (diodes, resistors); i have little to no experience with electrical work

[calmfries]

holy smokes, acrylic diffuser looks great. is there a guide on how LEDs work on keyboards (diodes, resistors); i have little to no experience with electrical work

The RGB LEDs are controlled by the controller part I suppose, which are usually ordered as soldered by default. At least that's the case for B87 pcbs. The diodes are for switches and resistors are for switch LEDs.

[Danboard]

That TX87 and diffuser are amazing! You mentioned it was based on the currency exchange but I'd be willing to put more down for the difference needed.

[uJalled]

holy smokes, acrylic diffuser looks great. is there a guide on how LEDs work on keyboards (diodes, resistors); i have little to no experience with electrical work

The RGB LEDs are controlled by the controller part I suppose, which are usually ordered as soldered by default. At least that's the case for B87 pcbs. The diodes are for switches and resistors are for switch LEDs.

Ok, I see. So it's better to have resistors and diodes presoldered on the PCB with the controller. That way the LEDs and switches can just be soldered on.

That TX87 and diffuser are amazing! You mentioned it was based on the currency exchange but I'd be willing to put more down for the difference needed.

^

[wilarseny]

Holy **** that acrylic diffuser is gorgeous. Jealous of you guys in the buy!

[E3E]

If someone has to bail out of this buy, I'll gladly take up an order + the acrylic diffuser. Hot damn! That is classy!

[HoffmanMyster]

Wow, that diffuser is amazing.  Already might be regretting passing on this one.  )

[justnits]

 

that beauty...

imagining a slow rainbow wave moving along the diffuser...hot dayum...

[unoab]

Well if I am not mistaken, the photo with the diffuser there is a TX1800...

[romevi]

Well if I am not mistaken, the photo with the diffuser there is a TX1800...

Yeah, it's definitely an 1800 since the numpad is there, but the design is otherwise the same, isn't it?

[unoab]

Well if I am not mistaken, the photo with the diffuser there is a TX1800...

Yeah, it's definitely an 1800 since the numpad is there, but the design is otherwise the same, isn't it?

For how the diffuser will be integrated, probably yes, for the case styling, not so much.  But both look very good in their own way.

[romevi]

Well if I am not mistaken, the photo with the diffuser there is a TX1800...

Yeah, it's definitely an 1800 since the numpad is there, but the design is otherwise the same, isn't it?

For how the diffuser will be integrated, probably yes, for the case styling, not so much.  But both look very good in their own way.

Yeah, meant the diffuser

[FreeChemicals]

Are there going to be any components presoldered?

I'd also like to know. Also, I've read the 456GT thread, and it isn't really reassuring a $1000 board got lost during transit. The packaging could also use a bit of improvement (new box, more compact, wrap everything separately). But, like you said you've factored in $15 per board, that shouldn't be a problem.

[Steezus]

Are there going to be any components presoldered?

I'd also like to know. Also, I've read the 456GT thread, and it isn't really reassuring a $1000 board got lost during transit. The packaging could also use a bit of improvement (new box, more compact, wrap everything separately). But, like you said you've factored in $15 per board, that shouldn't be a problem.

That was a learning experience for a lot of people and an unlucky mishap from the postal service.

[justnits]

I just thought about this: what about possible damage during shipping?

That's a very real concern, imo.

Given the prior situation, I hope their standards when it comes to packaging will increase given the amount of money on the line here. There were many great suggestions on how to ship expensive boards in Joey's 456 thread that more than likely got overlooked.

Do you mean to pack it in small and compact form? Just joking.

What I will do is, I will post photos of how the board will be packed and the buyers will comment. We will come to an agreement on how the board will be packed and shipped. I will not be responsible for any damage during shipping. No more compensating the buyer for the damage caused by the custom office or the courier.

Anyway, I have costed $15 in for packaging. So yeah, all good.

Are there going to be any components presoldered?

I'd also like to know. Also, I've read the 456GT thread, and it isn't really reassuring a $1000 board got lost during transit. The packaging could also use a bit of improvement (new box, more compact, wrap everything separately). But, like you said you've factored in $15 per board, that shouldn't be a problem.

i think the first post mentions that the controllers will be pre-soldered and then there's a table with the price of components and assembly by YongJK.

hmm, the part highlighted in bold red gives me the impression that buyers get to see how their boards are going to be packed and can be discussed with yuktsi before they are shipped out. and he did mentioned $15 cost in packaging, i'm quite sure that means new packaging materials such as box foams and wrapping.

with just 19 boards to ship out (1 is his own order), i believe it's manageable for him to discuss with buyers and then packed them accordingly and then HOPEFULLY (yuktsi, read this!), with his new experience under his belt, we might see round 2 of TGR! 

[filphil]

I think there are plans for another TGR already since he's giving the 19 of us dibs on the next buy

Good day peeps, here is the list.

Show Image

For those who didn't make it, I hope I able to make more, but 20 is what I am capable of at this moment. Thank you for your support, there will be slot reserved for you in the next GB, I hope this is not the last.   

[turboloser]

Still amazed at how fast these went. I placed my order like six hours after it was opened and I still didn't get in, lol.

[romevi]

Still amazed at how fast these went. I placed my order like six hours after it was opened and I still didn't get in, lol.

Pff. Placed mine within six minutes of it going up.





I just happened to look at the newest threads at the right time, is all.

[turboloser]

Still amazed at how fast these went. I placed my order like six hours after it was opened and I still didn't get in, lol.

Pff. Placed mine within six minutes of it going up.





I just happened to look at the newest threads at the right time, is all.

I goof'd, my feed kept saying the IC thread only had 50 posts so I figured there hadn't been an update, and then bam I click on it and suddenly there's a GB thread and the sale is going and I'm here scrambling to get my order in.

[KnivesM]

Still amazed at how fast these went. I placed my order like six hours after it was opened and I still didn't get in, lol.

I have new GB threads set to notify me by email, and I knew this was going to be happening around that date as Yuktsi had said so in the IC thread so I had sound alerts on.

[filphil]

I was originally 13th and ordered maybe 3 hours after it went up.

[henz]

just a thougt, is the number going to be put into the board or is it just the weight? otherwise ppl can just swapp the weight with eachother.

[jdcarpe]

I think there are plans for another TGR already since he's giving the 19 of us dibs on the next buy

Good day peeps, here is the list.

Show Image

For those who didn't make it, I hope I able to make more, but 20 is what I am capable of at this moment. Thank you for your support, there will be slot reserved for you in the next GB, I hope this is not the last.   

I took that to mean that the people who filled out the order form, but didn't make the first 20 slots, would get dibs on the next round. Not the people who were lucky and did make it into the first round. :)

[yuktsi]

Dear all, before I place any order for the boxes and PE foam. I would like to know how would you guys like the board to be packed?

This is what I have in mind

1) I will pre-assemble the board, meaning that I will screw everything together.
2) Wrap it with plastic wrap
3) Wrap with PE foam, 50mm thick in top bottom, front back direction
4) Put it into a box, fill the left right direction with 50mm of PE foam.
5) The box is small enough to prevent any movement in the box
6) Seal the box with adhesive tape. Attach the shipping address to the box.
7) Wrap the box with the brown wrapping paper (post office requirement), attach the shipping address on the wrapping paper.
Bring it to the post office and send.

Please advise. Huhu

[demik]

no pre assemble. package it all individually

[Steezus]

no pre assemble. package it all individually

I would recommend screwing the pcb into the case, I feel like the pcb isn't rigid enough by itself.

[demik]

no pre assemble. package it all individually

I would recommend screwing the pcb into the case, I feel like the pcb isn't rigid enough by itself.

i wouldnt

[yuktsi]

no pre assemble. package it all individually

do you mind telling why?

[yuktsi]

no pre assemble. package it all individually

I would recommend screwing the pcb into the case, I feel like the pcb isn't rigid enough by itself.

I will secure the pcb to the plate with some switches.

[tjcaustin]

no pre assemble. package it all individually

do you mind telling why?

That's the best way I've seen korean boards make it safe to the US.  PCB and plate are in separate plastic sleeves, which are layered loose in the case, then wrapped in foam sheeting and taped shut.

[Steezus]

Realistically speaking, if the package is going to take a hard enough impact to dent the case then I don't think it really matters whether it's individually wrapped or pre-assembled. I think the key point should be the cushioning around all the items as a whole.

[yuktsi]

Realistically speaking, if the package is going to take a hard enough impact to dent the case then I don't think it really matters whether it's individually wrapped or pre-assembled. I think the key point should be the cushioning around all the items as a whole.

the keyboard will be cushioned by at lest 50mm of PE foam in all direction.

[Photekq]

FWIW I've had a few new, unbuilt customs shipped to me all screwed together like yuktsi suggested and I've had no problems at all. The ones that were shipped to me also had a lot less padding than he's suggesting. Also, the PCBs were just sitting inside the cases.. Not fixed in place.

The brown wrapping is a worry though after seeing what happened to joey quinn's keyboard. That is a dumb ****ing requirement by the post office. Is there no way around it?

[quochung1989]

no pre assemble. package it all individually

Like this 

FWIW I've had a few new, unbuilt customs shipped to me all screwed together like yuktsi suggested and I've had no problems at all. The ones that were shipped to me also had a lot less padding than he's suggesting. Also, the PCBs were just sitting inside the cases.. Not fixed in place.

The brown wrapping is a worry though after seeing what happened to joey quinn's keyboard. That is a dumb ****ing requirement by the post office. Is there no way around it?

Oh oh thanks for sharing DIY kit package method. In fact, I never get any DIY kit before
I think package method 's yuktsi is good.

What happen with Joey Quinn's board?

[KnivesM]

FWIW I've had a few new, unbuilt customs shipped to me all screwed together like yuktsi suggested and I've had no problems at all. The ones that were shipped to me also had a lot less padding than he's suggesting. Also, the PCBs were just sitting inside the cases.. Not fixed in place.

The brown wrapping is a worry though after seeing what happened to joey quinn's keyboard. That is a dumb ****ing requirement by the post office. Is there no way around it?

Shouldn't be a issue I would think with all new boxes though, as there will be no old address for USPS to get confused about if they decide to open it up like they likely did on Joey Quinn's board.