Post by: Simen on Fri, 17 May 2019, 10:18:05
Oct, 12th, 2019 Updates: all is done, preparing for shipment. https://geekhack.org/index.php?topic=100769.msg2820673#msg2820673
Shipping info is available here : https://geekhack.org/index.php?topic=100769.msg2828212#msg2828212
(https://i.imgur.com/FKifThM.jpg)
(https://i.imgur.com/Q3AzML9.jpg)
(https://i.imgur.com/1qwY5FF.jpg)
(https://i.imgur.com/3zJsugJ.jpg)
(https://i.imgur.com/VeQqLV2.jpg)
(https://i.imgur.com/ljqEUXu.jpg)
IC: https://geekhack.org/index.php?topic=100540.0
GB Form: https://forms.gle/Bs5yVpaxQfbkxh9k7
Specifications:
- Made from ALU 6063 series
- 4mm ALU Plate
- Sandwich Mount
- WK or WKL Layout , NO ISO Layout supported
- 7 degree angle
- Type-c Hot Swappable PCB
Layout Supported
RGB Hot Swappable PCB WK Layout
(https://i.imgur.com/wC9eXhG.png)
RGB Hot Swappable PCB WKL Layout
(https://i.imgur.com/GUDsxPU.png?1)
QMK Hot Swappable PCB WK Layout I
(https://i.imgur.com/i6ovE5s.png)
QMK Hot Swappable PCB WK Layout II
(https://i.imgur.com/SLX9OI7.png)
QMK Hot Swappable PCB WKL Layout
(https://i.imgur.com/GUDsxPU.png?1)
Something need to be Noted Due to Fixed layout with Hot Swappable slots:
- stepped Capslock is NOT supported
- QMK Hot Swappable PCB WK Layout I and II are different PCB
Default kit (420 USD, PayPal included, Shipping excluded):
- ALU Case * 1 (E - White / E - Yellow / Ano Black / Ano Red)
- Plate * 1 (E - White / E - Yellow / Ano Black / Ano Red)
- Weight (E - White / E - Yellow / Ano Black / Ano Red)
- PCB ( RGB Hot Swappable / QMK Hot Swappable -10 USD)
- Screws
Upgrades / Additions:
- Upgrading to / additional Sandblast Brass Weight +30/+60 USD
- Upgrading to / additional PVD Brass Weight +45/+80 USD (Silver/Black)
- Additional QMK / RGB Hot Swappable PCB +45/+55 USD
- Additional ALU Plate +50 USD
- Additional ALU Weight +40 USD
GB Info:
- GB spots: 50 (FCFS)
- GB will be started at May 18th 19:00 (GMK -07:00)
- GB will be lasted for 1 week or all 50 spots were allocated
- Invoice will be sent after your form was submitted.
- Estimated Shipping time will be in October.
Shipping Info:
Shipping will be from ShenZheng, China, via SF-Express, trackable. Each set weighs about 4.5 kg with packaging. The shipping fee will only be invoiced when keyboards are ready. Estimated shipping cost (US 50$, Korean 30$, Europe $65)
More detail shipping fee and shipping time info is available at http://www.sf-express.com/us/en/dynamic_function/price/
Terms
We'll do our best to do QC but we cannot guarantee every board is 100% perfect.
If there are blemishes, depending on the condition of the boards, possible solutions include replacement, return item chargeback, and partial refunds.
Update Logs (at least monthly update will be provided)
- May, 5th 2019 GH IC Started https://geekhack.org/index.php?topic=100540.0 (https://geekhack.org/index.php?topic=100540.0)
- May, 12th 2019 Reddit IC started https://old.reddit.com/r/mechmarket/comments/bncjkm/icfox_inettsquare_80/ (https://old.reddit.com/r/mechmarket/comments/bncjkm/icfox_inettsquare_80/)
- May, 18th 2019 GH GB Started
- May, 20th 2019 GB Status Update -- All 50 spots were full yesterday, and we have started to send invoice after that. Due to 2 reasons, We did not close the form. First, some joiners did not pay for invoice yet. As PayPal invoice default expiration period, some sent invoices will be expired in the afternoon. Once invoice expired, we will allocate spots to other players in the queue. Second, form is opened for joiners to make changes to their original choice or add more components.
- May, 21st 2019 GH GB Closed. -- As 90% slots were paid, we have to close GB now. Thanks everyone's joining and interests. We will wait for some pending invoice to be paid, and shift to manufacturing phase
- May, 22nd 2019 Important notes to all joiners (https://geekhack.org/index.php?topic=100769.msg2765022#msg2765022) and confirmation email has sent to all joiners.
- May, 28th, 2019 GB Check published: https://docs.google.com/spreadsheets/d/1tlAZ1Y7P-3pBuqz4S-pSSOllvucqTwdMUXG_jksQ7xU/edit#gid=0
- June, 19th, 2019 Updates: https://geekhack.org/index.php?topic=100769.msg2777979#msg2777979
- July, 17th, 2019 Updates: bottom and top CNC was done. https://geekhack.org/index.php?topic=100769.msg2787510#msg2787510
- August, 14th, 2019 Updates: all CNC was done, now shift to ANO phase. https://geekhack.org/index.php?topic=100769.msg2798100#msg2798100
- Oct, 12th, 2019 Updates: all is done, preparing for shipment. https://geekhack.org/index.php?topic=100769.msg2820673#msg2820673
Post by: Simen on Fri, 17 May 2019, 10:19:24
https://docs.google.com/spreadsheets/d/1tlAZ1Y7P-3pBuqz4S-pSSOllvucqTwdMUXG_jksQ7xU/edit#gid=0 (https://docs.google.com/spreadsheets/d/1tlAZ1Y7P-3pBuqz4S-pSSOllvucqTwdMUXG_jksQ7xU/edit#gid=0)
Important Notes for all joiners
Because GB form design was not designed in a perfect state, we missed some choice in it. Something more need to be check with joiners:
- For who chose both 'upgrading sandblast weight' and 'upgrading brass PVD weight': since that 2 options are conflict. The main difference for them is that it will be shinning with PVD. Please let us know your prefer. If you want have PVD, you can chose 'Black' or 'Silver' color for it.
- For who chose QMK pcb combine with WK layout in base kit, there are 2 layout provided for it: WK Layout I (6.25u Spacebar) and WK Layout II (7u spacebar). We will provide WK layout I as default option. If you prefer Layout II, please let us known
- For who chose additional QMK pcb, please let us know preferred layout. ( WKL / WK Layout I / WK Layout II )
- For who chose additional Alu plate, please let us know preferred color (Anodizing Black / Anodizing Red / E-White / E-Yellow) and layout (WK / WKL)
- For who chose additional Alu weight, please let us know preferred color (Anodizing Black / Anodizing Red / E-White / E-Yellow)
Any method to inform us is appreciated, reply email directly, PM in forum, etc.
Post by: Signature on Sat, 18 May 2019, 06:58:21
Post by: papa on Sat, 18 May 2019, 11:17:02
Post by: metalliccharles on Sat, 18 May 2019, 11:32:38
Post by: mgsickler on Sat, 18 May 2019, 14:02:35
Post by: metalliccharles on Sat, 18 May 2019, 14:04:09
Post by: kyungpil park on Sat, 18 May 2019, 19:02:28
Post by: kiyoboard on Sat, 18 May 2019, 21:03:53
Post by: Wraul on Sat, 18 May 2019, 21:08:18
Anyone knows when this will start? I also assumed it is GMT -7 which should be now.
So did I.
Edit: There we go. Just as I posted that the form went live, you can thank me later.
Post by: volcanicislander on Sat, 18 May 2019, 21:16:24
Post by: Simen on Sat, 18 May 2019, 21:50:03
which time zone is this?? you mean GMT -7?
Anyone knows when this will start? I also assumed it is GMT -7 which should be now.
Already started. Thanks for your interests
Post by: Simen on Sat, 18 May 2019, 21:51:39
No blue options?
Yes, blue option was removed after prototype since I found that it is NOT so beautiful in daylight. So I decided to remove it from gb.
Post by: Simen on Sat, 18 May 2019, 21:52:22
Did this sell out? Or has the form not opened yet?
form opened, please join :thumb:
Post by: Simen on Sat, 18 May 2019, 21:52:58
Exciting stuff! Love the design.
Thanks a lot
Post by: TeeAreEffedUp on Sat, 18 May 2019, 21:54:57
Post by: rmendis on Sat, 18 May 2019, 23:05:26
Post by: metalliccharles on Sat, 18 May 2019, 23:14:17
Yes, blue option was removed after prototype since I found that it is so beautiful in daylight. So I decided to remove it from gb.
Blue was too beautiful? Blue with yellow plate is what I originally wanting.
Post by: Simen on Sat, 18 May 2019, 23:20:31
In my excitement to hurry and fill out the form, I forgot to add an extra plate. Will we have the option to edit our orders later?
Yes, form can be edited any time before GB ended, and you can also pm me anything you would like to change.
Post by: Simen on Sat, 18 May 2019, 23:22:41
In for black on red. Going to be my Ferrari board :cool:Yes, blue option was removed after prototype since I found that it is so beautiful in daylight. So I decided to remove it from gb.
Blue was too beautiful? Blue with yellow plate is what I originally wanting.
oh, sorry for the oversight during excitement for GB. missing NOT in my explanation :(
Blue case is not so beautiful as it shown in photo studio. finally, I decided to remove it.
Post by: metalliccharles on Sat, 18 May 2019, 23:28:47
oh, sorry for the oversight during excitement for GB. missing NOT in my explanation :(
Blue case is not so beautiful as it shown in photo studio. finally, I decided to remove it.
Oh, I see. Thank you for the clarification. Red will do :D
Post by: coffeeshopcoder on Sun, 19 May 2019, 04:14:14
Post by: Simen on Sun, 19 May 2019, 05:18:47
Will I be able to use the hineybush H87a PCB with this case ?
Sorry, it can NOT be compatible with other PCB.
Post by: Simen on Sun, 19 May 2019, 05:19:27
oh, sorry for the oversight during excitement for GB. missing NOT in my explanation :(
Blue case is not so beautiful as it shown in photo studio. finally, I decided to remove it.
Oh, I see. Thank you for the clarification. Red will do :D
Thanks for joining. I will try my best to take the best to you all.
Post by: TheGenericAsian on Sun, 19 May 2019, 08:33:44
Post by: Jinnnxxu on Sun, 19 May 2019, 09:07:50
Post by: clik_clak on Sun, 19 May 2019, 09:41:50
Post by: xoppel on Sun, 19 May 2019, 09:46:52
Post by: kiyoboard on Sun, 19 May 2019, 10:03:55
How does one get a second plate of a different color?
I mentioned it at the end of the form and my invoice had the extra plate with the color I requested.
Post by: pixelpusher on Sun, 19 May 2019, 10:10:52
Post by: Simen on Sun, 19 May 2019, 11:15:21
Why the difference between QMK and RGB hotswappable pcb's? It seems like RGB could be added to QMK just as easy...
QMK Firmware is not ready for it. We will try it in next gb ^-^
Post by: Simen on Sun, 19 May 2019, 11:17:32
How does one get a second plate of a different color?
How does one get a second plate of a different color?
I mentioned it at the end of the form and my invoice had the extra plate with the color I requested.
I am sorry that the option is not available in gb form. Feel free to add it in note or I will message / email you to check more details
Post by: Simen on Sun, 19 May 2019, 11:21:06
Will the final product have the accent color trim sitting perfectly flush with the rest of the keyboard? It’s it flush in some of the photos and that would only be a big dirt trap for me
Height for inner rim is 0.03 cm lower than case in order to get a more beautiful sense of layering. For my experience with prototypes, dust will not be accumulated in that mini gap, and it is very easy to clean. ^-^
Post by: yumboy1 on Sun, 19 May 2019, 11:24:10
Post by: aznriptide859 on Sun, 19 May 2019, 11:29:24
Question, but one of the last renders on the IC page shows a white case with a gold tray/insert, will that gold tray be offered as an option or no?
Post by: Nigolski on Sun, 19 May 2019, 11:44:13
Post by: Simen on Sun, 19 May 2019, 11:48:53
I want to change the brass weight silver color
Noted
Post by: regionfree on Sun, 19 May 2019, 11:49:19
In for one!
Question, but one of the last renders on the IC page shows a white case with a gold tray/insert, will that gold tray be offered as an option or no?
that could be the sandblasted brass plate option.
Post by: Simen on Sun, 19 May 2019, 11:50:17
In for one!
Question, but one of the last renders on the IC page shows a white case with a gold tray/insert, will that gold tray be offered as an option or no?
I am sorry that brass plate option will not be provided during gb since difficulties during manufacturing
Post by: Simen on Sun, 19 May 2019, 11:50:55
sick
what is your meaning? :eek:
Post by: Simen on Sun, 19 May 2019, 11:57:02
In for one!
Question, but one of the last renders on the IC page shows a white case with a gold tray/insert, will that gold tray be offered as an option or no?
that could be the sandblasted brass plate option.
Yes, exactly it is a sandblast brass plate for prototype. But for difficulties during manufacturing, we have to abandon it during gb.
Post by: Puddsy on Sun, 19 May 2019, 12:54:32
sick
what is your meaning? :eek:
it's a good thing
Post by: mahogany_slide on Sun, 19 May 2019, 13:07:12
Additionally, would the QMK Hot Swappable PCB WK Layout I still support LED functionality if you added them yourselves?
Post by: aznriptide859 on Sun, 19 May 2019, 14:04:21
In for one!
Question, but one of the last renders on the IC page shows a white case with a gold tray/insert, will that gold tray be offered as an option or no?
I am sorry that brass plate option will not be provided during gb since difficulties during manufacturing
That's a shame, thanks for the clarification!
Post by: metalliccharles on Sun, 19 May 2019, 14:31:30
Post by: JDragon on Sun, 19 May 2019, 22:15:03
Post by: Peiweisgreat on Mon, 20 May 2019, 01:27:45
Post by: Simen on Mon, 20 May 2019, 01:37:41
I missed this post when I originally submitted for purchase. I didn't realize the RGB Hot Swappable PCB was a 7u space bar without a Fn key. Would it be possible to switch to a QMK Hot Swappable PCB WK Layout I still?
Additionally, would the QMK Hot Swappable PCB WK Layout I still support LED functionality if you added them yourselves?
Yes. Of course, we can change order option for you. But as confirmed, LED is not physically supported by QMK PCB since LED can not be allocated in PCB along with hot swappable slots.
Let me know if you want to change or cancel your order.
Post by: Simen on Mon, 20 May 2019, 01:38:07
sick
what is your meaning? :eek:
it's a good thing
Thanks for clarification :)
Post by: Simen on Mon, 20 May 2019, 02:06:18
Assuming there's still spots available in the GB, I want to get a case to reanodize silver. Is it easier to reanodize the e-white cases or the standard anodized cases?
GB Status just updated: All 50 spots were full yesterday, and we have started to send invoice after that. Due to 2 reasons, We did not close the form. First, some joiners did not pay for invoice yet. As PayPal invoice default expiration period, some sent invoices will be expired in the afternoon. Once invoice expired, we will allocate spots to other players in the queue. Second, form is opened for joiners to make changes to their original choice or add more components.
For your questions, if you want to re-ano it, standard anodized cases should be better for you.
Post by: Simen on Mon, 20 May 2019, 02:09:46
Can you give the weight of the case? Also the weight of the brass weight?
For base kit without package, weight is around 3.5KG. Estimated weight for brass weight is 0.5 KG.
Post by: Morgan3Wheeler on Mon, 20 May 2019, 04:28:50
Is LED supported on that?
(https://i.imgur.com/4flJj4R.jpg)
Post by: aznriptide859 on Mon, 20 May 2019, 09:50:08
GB Status just updated: All 50 spots were full yesterday, and we have started to send invoice after that. Due to 2 reasons, We did not close the form. First, some joiners did not pay for invoice yet. As PayPal invoice default expiration period, some sent invoices will be expired in the afternoon. Once invoice expired, we will allocate spots to other players in the queue. Second, form is opened for joiners to make changes to their original choice or add more components.
For your questions, if you want to re-ano it, standard anodized cases should be better for you.
Just sent my payment in :) can't wait for this board!
Post by: Simen on Mon, 20 May 2019, 10:51:48
I ordered QMK PCB.
Is LED supported on that?Show Image(https://i.imgur.com/4flJj4R.jpg)
LED is supported at that 3 indicators as shown in your picture. I mean that LEDs under switches (under glow) are not supported since there is no space after hot swappable switches slots were soldered.
Post by: Simen on Mon, 20 May 2019, 10:54:28
GB Status just updated: All 50 spots were full yesterday, and we have started to send invoice after that. Due to 2 reasons, We did not close the form. First, some joiners did not pay for invoice yet. As PayPal invoice default expiration period, some sent invoices will be expired in the afternoon. Once invoice expired, we will allocate spots to other players in the queue. Second, form is opened for joiners to make changes to their original choice or add more components.
For your questions, if you want to re-ano it, standard anodized cases should be better for you.
Just sent my payment in :) can't wait for this board!
Thanks for joining . hope you enjoy it :)
Post by: metalliccharles on Mon, 20 May 2019, 11:34:36
Can you give the weight of the case? Also the weight of the brass weight?
For base kit without package, weight is around 3.5KG. Estimated weight for brass weight is 0.5 KG.
I'll probably end up getting a brass weight as well then. How long do I have to add that to my order?
Post by: mahogany_slide on Mon, 20 May 2019, 11:56:14
I missed this post when I originally submitted for purchase. I didn't realize the RGB Hot Swappable PCB was a 7u space bar without a Fn key. Would it be possible to switch to a QMK Hot Swappable PCB WK Layout I still?
Additionally, would the QMK Hot Swappable PCB WK Layout I still support LED functionality if you added them yourselves?
Yes. Of course, we can change order option for you. But as confirmed, LED is not physically supported by QMK PCB since LED can not be allocated in PCB along with hot swappable slots.
Let me know if you want to change or cancel your order.
Good to know, thanks. I'll keep my original order then.
Post by: XtReeM1337n355 on Mon, 20 May 2019, 14:43:55
Post by: odd on Mon, 20 May 2019, 17:18:05
Post by: vision-quest on Mon, 20 May 2019, 17:22:06
If any one wants to sell their spot please msg me. :thumb:s
The group buy is active, just buy it..
Post by: DetectiveNio on Mon, 20 May 2019, 18:09:42
If any one wants to sell their spot please msg me. :thumb:s
The group buy is active, just buy it..
Im surprised it hasnt hit 50 orders yet
Post by: metalliccharles on Mon, 20 May 2019, 18:59:09
If any one wants to sell their spot please msg me. :thumb:s
The group buy is active, just buy it..
Im surprised it hasnt hit 50 orders yet
It did.
GB Status just updated: All 50 spots were full yesterday, and we have started to send invoice after that. Due to 2 reasons, We did not close the form. First, some joiners did not pay for invoice yet. As PayPal invoice default expiration period, some sent invoices will be expired in the afternoon. Once invoice expired, we will allocate spots to other players in the queue. Second, form is opened for joiners to make changes to their original choice or add more components.
Post by: TeeAreEffedUp on Mon, 20 May 2019, 19:56:16
GB Status just updated: All 50 spots were full yesterday, and we have started to send invoice after that. Due to 2 reasons, We did not close the form. First, some joiners did not pay for invoice yet. As PayPal invoice default expiration period, some sent invoices will be expired in the afternoon. Once invoice expired, we will allocate spots to other players in the queue. Second, form is opened for joiners to make changes to their original choice or add more components.
For your questions, if you want to re-ano it, standard anodized cases should be better for you.
Just sent my payment in :) can't wait for this board!
Thanks for joining . hope you enjoy it :)
I messaged with some questions as I never received an invoice. If you could reply when you get a chance that'd be great.
Thanks,
Tom
Post by: Simen on Mon, 20 May 2019, 21:21:46
Can you give the weight of the case? Also the weight of the brass weight?
For base kit without package, weight is around 3.5KG. Estimated weight for brass weight is 0.5 KG.
I'll probably end up getting a brass weight as well then. How long do I have to add that to my order?
I will send a separate invoice to you soon for brass weight soon. and take a note in my form.
Post by: Simen on Mon, 20 May 2019, 21:25:38
Hi Simen, I sent you an email regarding my order. Please respond when you have the time.
already replied. sorry for later reply
Post by: Simen on Mon, 20 May 2019, 21:27:08
GB Status just updated: All 50 spots were full yesterday, and we have started to send invoice after that. Due to 2 reasons, We did not close the form. First, some joiners did not pay for invoice yet. As PayPal invoice default expiration period, some sent invoices will be expired in the afternoon. Once invoice expired, we will allocate spots to other players in the queue. Second, form is opened for joiners to make changes to their original choice or add more components.
For your questions, if you want to re-ano it, standard anodized cases should be better for you.
Just sent my payment in :) can't wait for this board!
Thanks for joining . hope you enjoy it :)
I messaged with some questions as I never received an invoice. If you could reply when you get a chance that'd be great.
Thanks,
Tom
Hi, Tom
I have read your message and replied. Sorry for later reply :)
Post by: Simen on Mon, 20 May 2019, 21:28:06
I missed this post when I originally submitted for purchase. I didn't realize the RGB Hot Swappable PCB was a 7u space bar without a Fn key. Would it be possible to switch to a QMK Hot Swappable PCB WK Layout I still?
Additionally, would the QMK Hot Swappable PCB WK Layout I still support LED functionality if you added them yourselves?
Yes. Of course, we can change order option for you. But as confirmed, LED is not physically supported by QMK PCB since LED can not be allocated in PCB along with hot swappable slots.
Let me know if you want to change or cancel your order.
Good to know, thanks. I'll keep my original order then.
Thanks for joining with us :thumb:
Post by: regionfree on Tue, 21 May 2019, 18:50:23
Post by: yumboy1 on Wed, 22 May 2019, 08:21:31
Post by: Simen on Wed, 22 May 2019, 10:45:09
Hi Simen. Have sent an email to your qq account asking for a layout change. Please let me know when you get it. Appreciate your response. Thanks!
Should be noted in gb form, which will be published soon. And we have sent confirmation email to all joiners, please double check it is aligned with your email.
Post by: Simen on Wed, 22 May 2019, 10:45:58
I would like to see a video typing with this keyboard. plz~
Let me try. For these days, we are busy with gb stuffs. There should be some delay for posting.
Post by: Morgan3Wheeler on Thu, 23 May 2019, 05:09:02
Post by: Simen on Thu, 23 May 2019, 09:52:08
Is stepped Capslock NOT supported?
Yes, Stepped CapsLock is NOT supported.
Post by: Locnguyen1507 on Sun, 26 May 2019, 11:39:58
Post by: Droodss on Mon, 27 May 2019, 11:40:46
Post by: Simen on Tue, 28 May 2019, 03:21:17
Just sent email for my order confirmation with changing in color case, plate and pcb.
Received. I have taken notes for your requests. :thumb:
Post by: Simen on Tue, 28 May 2019, 03:22:25
I had already replied to the first email that you sent me, but I got another asking for the same thing. If you haven't changed it already, please make both of my PCBs WKL
I am sorry that I do not get your reply email. I have read your GH PM and take notes for it.
Post by: woodruff on Tue, 28 May 2019, 04:46:35
Post by: lukelex on Tue, 28 May 2019, 06:53:57
Sent from my SM-G975F using Tapatalk
Post by: Simen on Tue, 28 May 2019, 09:44:17
https://docs.google.com/spreadsheets/d/1tlAZ1Y7P-3pBuqz4S-pSSOllvucqTwdMUXG_jksQ7xU/edit#gid=0 (https://docs.google.com/spreadsheets/d/1tlAZ1Y7P-3pBuqz4S-pSSOllvucqTwdMUXG_jksQ7xU/edit#gid=0)
Post by: Simen on Tue, 28 May 2019, 09:57:40
LOL no ISO.
ISO is dead LOL
Sent from my SM-G975F using Tapatalk
It is very hard to support multi layout since hot swappable was adopted in Square 80%. We will try to take ISO in our next GB :)
Post by: woodruff on Tue, 28 May 2019, 10:18:47
ISO is dead LOL
Sent from my SM-G975F using Tapatalk
LOL waht
Post by: ywcsam on Tue, 28 May 2019, 19:37:48
Just saying because I have never been #1 before lol
Post by: lukelex on Wed, 29 May 2019, 03:21:54
It'd be nice if the non hotswap PCB from the next GB is compatible with the R1 case. I'm in this GB just for the awesome case and plate design but hate hotswap.LOL no ISO.ISO is dead LOL
Sent from my SM-G975F using Tapatalk
It is very hard to support multi layout since hot swappable was adopted in Square 80%. We will try to take ISO in our next GB :)
Sent from my SM-G975F using Tapatalk
Post by: micklll on Sun, 02 June 2019, 13:04:49
Thank you!
Post by: Simen on Mon, 03 June 2019, 20:04:40
Made a change to my order via email on 5/26 for invoice #0058 but wasn't sure if it was recorded. Could these changes be made?
Base Kit: 410 USD (QMK Hot Swappable PCB)
Layout: WKL
PCB: QMK Hot Swappable PCB
Case Color: Anodizing Black
Plate Color: Anodizing Red WKL
ALU Weight Color: E-Yellow
Additional Alu Plate (+50 USD): E-Yellow WKL
Updated in google form
Post by: Morgan3Wheeler on Tue, 04 June 2019, 09:42:28
Post by: skaloola on Wed, 05 June 2019, 09:01:54
Post by: Simen on Wed, 05 June 2019, 09:31:15
sent mail.
checked mail box. no incoming mail. May I know which email address you have sent to?
Post by: Morgan3Wheeler on Wed, 05 June 2019, 21:03:29
sent mail.
checked mail box. no incoming mail. May I know which email address you have sent to?
Sent again to inett.studio@gmail.com and dhaohuan@gmail.com
Post by: Simen on Thu, 06 June 2019, 12:04:35
sent mail.
checked mail box. no incoming mail. May I know which email address you have sent to?
Sent again to inett.studio@gmail.com and dhaohuan@gmail.com
Replied, Please check and let me know your thoughts.
Post by: skc5956 on Tue, 18 June 2019, 06:45:55
나의 SM-N960N 의 Tapatalk에서 보냄
Post by: Simen on Tue, 18 June 2019, 08:59:26
I have something to ask. Please give me your email
나의 SM-N960N 의 Tapatalk에서 보냄
Feel free to reach me in inett.studio@gmail.com or dhaohuan@gmail.com
Post by: Simen on Wed, 19 June 2019, 01:30:49
All materials were purchased and safely delivered to our lovely Manufature - Fox.
Now, we shift to manufacture phase.
Post a Demo for LED
https://i.imgur.com/ERoTmmU.mp4 (https://i.imgur.com/ERoTmmU.mp4)
All these LEDs are built with rgb led.
The first one is CapsLock indicator. As shown in demo video, it will be keep shown as white while Caps Lock was hold.
The second one is NumLock, and the third one is WinLock.
Post by: Simen on Wed, 17 July 2019, 02:14:53
Excited news, All bottom and top CNC were done. Here are some pictures :
(https://i.imgur.com/KW1Tpbt.jpg)
(https://i.imgur.com/mD27f9D.jpg)
(https://i.imgur.com/wJy9Yas.jpg)
Post by: lovetree on Sat, 20 July 2019, 22:45:23
Post by: Simen on Tue, 13 August 2019, 11:46:53
Weight and LED cover:
(https://i.imgur.com/6IzB0p4.jpg)
TOP:
(https://i.imgur.com/YndfxGi.jpg)
Post by: Puddsy on Tue, 13 August 2019, 18:21:11
Post by: bricra1983 on Tue, 13 August 2019, 21:02:18
Post by: Workglove27 on Tue, 13 August 2019, 22:48:57
Post by: supersahib on Tue, 13 August 2019, 23:06:18
Post by: Peiweisgreat on Wed, 14 August 2019, 04:25:41
Post by: Simen on Mon, 26 August 2019, 03:52:01
First White/Red was arrived in my side. I can not wait more to share with yours :) neat and lovely one
Keyboard: Square 80% White/Red
Switches: Cherry Brown switches (assembled it in a hurry w/o lubing) :p
Keycap: JTK Triple Shot
Post by: metalliccharles on Mon, 26 August 2019, 09:45:15
Post by: Simen on Tue, 27 August 2019, 10:50:52
This is looking great! :cool: Does this mean ano is done and shipping soon?
ANO is in progress. I just requested one from manufacture for quality check. It is perfect , thanks Fox Lab on nice manufacture.
Please wait more :) I will keep updating status.
Post by: Nebulant on Fri, 30 August 2019, 23:42:06
Post by: Mcnos on Sat, 31 August 2019, 01:13:16
Post by: Puddsy on Sat, 31 August 2019, 10:54:26
Looks nicer the second time around for sure.
every gb in a nutshell
Post by: regionfree on Wed, 25 September 2019, 06:04:30
Post by: Simen on Wed, 25 September 2019, 12:13:02
Some parts of the previous period of time did not do well, resulting in a new batch.Now all keyboards have been colored and will be completed in early October. I can assure you that shipment will be made in October. :)
Post by: lukelex on Fri, 27 September 2019, 07:54:03
Layout: WKL
PCB: QMK Hot Swappable PCB
Case Color: E-Yellow
Plate Color: Anodizing Black
ALU Weight Color: N/A
Upgrading to brass Sandblast Weight (+30 USD): Yes
Post by: drewface_ on Fri, 27 September 2019, 13:33:58
Looking to sell my spot.
Layout: WKL
PCB: QMK Hot Swappable PCB
Case Color: E-Yellow
Plate Color: Anodizing Black
ALU Weight Color: N/A
Upgrading to brass Sandblast Weight (+30 USD): Yes
I Pm'd! This is exactly what I'm looking for.
Post by: Peiweisgreat on Thu, 10 October 2019, 00:32:34
Post by: Simen on Sat, 12 October 2019, 03:55:23
All products were done. It is amazing. :p :p :p
(https://i.imgur.com/xsvLSUC.jpg)
(https://i.imgur.com/xdewB7u.jpg)
(https://i.imgur.com/8ZwZJYl.jpg)
(https://i.imgur.com/S8Nbel3.jpg)
I am waiting for shipment from manufacture to my side and package it for shipping. And once package was done, I will send shipping invoice based on actual weight. I am quite sure that I will ship them in this month :thumb:
Post by: Simen on Sat, 12 October 2019, 03:57:27
Post by: regionfree on Sat, 12 October 2019, 05:24:17
Post by: Clickwind on Sat, 12 October 2019, 07:56:19
Post by: Peiweisgreat on Fri, 25 October 2019, 01:13:54
Post by: regionfree on Thu, 31 October 2019, 04:14:42
Post by: ywcsam on Thu, 31 October 2019, 10:38:36
Post by: Simen on Thu, 31 October 2019, 10:53:25
https://docs.google.com/spreadsheets/d/1NU3ClX8A8eVwOH2Ez4MDGlkYd-4Uw9s3nI0x3j89-NY/edit?usp=sharing
Post by: regionfree on Thu, 31 October 2019, 12:10:00
Shipping is started, and shipping status is available here:
https://docs.google.com/spreadsheets/d/1NU3ClX8A8eVwOH2Ez4MDGlkYd-4Uw9s3nI0x3j89-NY/edit?usp=sharing
great, thanks!
Post by: micklll on Fri, 01 November 2019, 01:41:04
Post by: regionfree on Thu, 07 November 2019, 05:03:14
Post by: Slash Emperor on Thu, 07 November 2019, 07:04:25
Post by: TheGenericAsian on Thu, 07 November 2019, 10:46:57
Post by: Clickwind on Thu, 07 November 2019, 16:38:48
Post by: Peiweisgreat on Sun, 10 November 2019, 05:34:12
Post by: jooobe on Sun, 10 November 2019, 20:44:45
Sent from my iPad using Tapatalk
Post by: regionfree on Tue, 12 November 2019, 06:32:48
Post by: Simen on Tue, 12 November 2019, 06:48:45
When will shipping start? Noticed that most shipping invoices have already been paid.i am sorry that there is a little bit delay on shipping since I am busy with my works recently. Shipping was started in these days and some tracking info has already shared with you via PayPal . Please be patient, I am keeping working on shipping. :)
Post by: regionfree on Tue, 12 November 2019, 15:54:45
When will shipping start? Noticed that most shipping invoices have already been paid.i am sorry that there is a little bit delay on shipping since I am busy with my works recently. Shipping was started in these days and some tracking info has already shared with you via PayPal . Please be patient, I am keeping working on shipping. :)
Thanks for the update, Simen!
Post by: Workglove27 on Thu, 14 November 2019, 16:13:38
[attachimg=1]
Post by: regionfree on Fri, 15 November 2019, 00:04:05
Put together my hot swap yellow board with some holy pandas and SA Symbiosis.
(Attachment Link)
The color looks really good! would you be able post more photos? The details of the bottom side would be nice, and the sides.
Post by: Workglove27 on Fri, 15 November 2019, 13:48:42
Put together my hot swap yellow board with some holy pandas and SA Symbiosis.
(Attachment Link)
The color looks really good! would you be able post more photos? The details of the bottom side would be nice, and the sides.
Post by: Starfox64 on Fri, 15 November 2019, 15:52:18
Will zeal screw ins work?
Post by: micklll on Sat, 16 November 2019, 00:44:12
(Attachment Link) (Attachment Link) (Attachment Link)Put together my hot swap yellow board with some holy pandas and SA Symbiosis.
(Attachment Link)
The color looks really good! would you be able post more photos? The details of the bottom side would be nice, and the sides.
How's the build quality on it?
Post by: regionfree on Sat, 16 November 2019, 01:01:21
(Attachment Link) (Attachment Link) (Attachment Link)Put together my hot swap yellow board with some holy pandas and SA Symbiosis.
(Attachment Link)
The color looks really good! would you be able post more photos? The details of the bottom side would be nice, and the sides.
thanks! looking really great. excited to get mine :D
Post by: holdme01 on Mon, 18 November 2019, 09:57:28
Post by: regionfree on Thu, 21 November 2019, 07:14:53
Post by: Simen on Thu, 21 November 2019, 10:59:53
RGB backlighting driver software: https://1drv.ms/u/s!AtOD8Cgk3QnRglB9HdMRQ5F5GqMc?e=papmWN
(Only a Windows version of the software is provided for the moment. Mac users please use key combos on-board if you want to adjust the backlighting.) The first key at the right of the space is FN.
QMK source codes: https://1drv.ms/u/s!AtOD8Cgk3QnRglKia89nto4nEw2e?e=Y6he5a
FN Shortcut
FN+1： My Computer
FN+2： HOMEPAGE
FN+3： MAIL
FN+4： MUSIC PLAYER
FN+5： Previous
FN+6： Next
FN+7： PLAY / PAUSE
FN+8： STOP
FN+9： VOLUME UP
FN+10： VOLUME DOWN
FN+11： MUTE
FN+12： CALCULATOR
Lighting control
FN+Scrlk： RGB MODE SWITCH
FN+1/2/3`````0：RGB MODE SWITCH
FN+（↓）（↑）：RGB Light brighten / darken，5 Grades
FN+（←）（→）：RGB Speed Up / Down. 5 Grades
FN+Left WIN：WIN LOCK The third indicator light will be turn on.
FN+ESC：Hold it 3 seconds, RGB lights will be flashed 5 times and restored as default setting.
Post by: micklll on Sat, 23 November 2019, 04:11:27
Post by: ywcsam on Sat, 23 November 2019, 16:00:53
Post by: metalliccharles on Mon, 02 December 2019, 14:31:51
Post by: JackieX on Tue, 03 December 2019, 16:32:09
Post by: Simen on Wed, 04 December 2019, 00:37:38
Post by: Simen on Wed, 04 December 2019, 00:38:35
Hello. Anyone get the same problem with me? After mount the pcb to plate, I cannnot insert the switch to hotswap socket and cannot mount the bottom to top case.Will you be able to show more details in email? I cound not identify the issue from shared pictures. I have also tried with Gateron switches which is a little bigger than Cherry Switches. But nothing wrong with it. If you can record some Video for the issue, that would be nice. :D
Post by: ywcsam on Wed, 04 December 2019, 01:56:47
Hello. Anyone get the same problem with me? After mount the pcb to plate, I cannnot insert the switch to hotswap socket and cannot mount the bottom to top case.
I just put mine together and I don't have the same issue. My plate still sits flush to the bottom of the keyboard after installing the PCB. Can you show a picture of the back of the pcb?
Post by: JackieX on Wed, 04 December 2019, 23:29:51
Hello. Anyone get the same problem with me? After mount the pcb to plate, I cannnot insert the switch to hotswap socket and cannot mount the bottom to top case.Will you be able to show more details in email? I cound not identify the issue from shared pictures. I have also tried with Gateron switches which is a little bigger than Cherry Switches. But nothing wrong with it. If you can record some Video for the issue, that would be nice. :D
I sent the Google drive link to your inbox. Please help to check!
Post by: JackieX on Thu, 05 December 2019, 00:08:52
Hello. Anyone get the same problem with me? After mount the pcb to plate, I cannnot insert the switch to hotswap socket and cannot mount the bottom to top case.
I just put mine together and I don't have the same issue. My plate still sits flush to the bottom of the keyboard after installing the PCB. Can you show a picture of the back of the pcb?
Post by: Ace_Entity on Thu, 05 December 2019, 03:23:43
Post by: regionfree on Sat, 07 December 2019, 21:02:10
Post by: metalliccharles on Sun, 08 December 2019, 12:24:41
Any updates on when the remaining sets will be shipped out? Will they be out before the year ends?
I got my shipping notification Thursday, so they're definitely going out.
Post by: Simen on Mon, 09 December 2019, 10:12:31
Any updates on when the remaining sets will be shipped out? Will they be out before the year ends?I will strive to ship all the remaining orders by the end of the month. It’s been quite a draining period of time as tasks and issues like to cluster at the end of the year. I sincerely apologize for the delay in fulfilling the groupbuy this time and will do my all to ensure the timeliness of my future groupbuys.
Post by: regionfree on Mon, 09 December 2019, 20:51:29
Any updates on when the remaining sets will be shipped out? Will they be out before the year ends?I will strive to ship all the remaining orders by the end of the month. It’s been quite a draining period of time as tasks and issues like to cluster at the end of the year. I sincerely apologize for the delay in fulfilling the groupbuy this time and will do my all to ensure the timeliness of my future groupbuys.
Thanks for the update, Simen. Communication is greatly appreciated!
Post by: Ace_Entity on Wed, 11 December 2019, 01:13:12
Post by: regionfree on Sat, 14 December 2019, 19:30:52
Post by: lithe on Tue, 17 December 2019, 08:25:23
Post by: proboy84 on Tue, 17 December 2019, 09:16:11
Post by: regionfree on Tue, 17 December 2019, 17:55:08
Shipping started in October--I have yet to receive notice or see the sheet updated--are there any updates?
there’s still around 17 kits pending shipment based on the current spreadsheet.
Post by: JackieX on Wed, 18 December 2019, 08:36:46
Any updates on when the remaining sets will be shipped out? Will they be out before the year ends?I will strive to ship all the remaining orders by the end of the month. It’s been quite a draining period of time as tasks and issues like to cluster at the end of the year. I sincerely apologize for the delay in fulfilling the groupbuy this time and will do my all to ensure the timeliness of my future groupbuys.
Please check my email about plate problem.
Post by: Simen on Fri, 27 December 2019, 09:39:22
Just finish the build. love it :-*Wow, it looks so good！！！
:thumb: :thumb:
Post by: Simen on Fri, 27 December 2019, 10:06:40
Hello, what is the correct way to compile custom firmware for this keyboard? I have the wkl qmk version. I tried copying the files from the source code folder you linked earlier into my qmk master folder, and clicked "replace files in destination". I was able to compile custom firmware using msys2, but moving those files over broke my ability to compile firmware for any other keyboard in the qmk library. Also I was not able to use multimedia keycodes in my custom keymap. (like KC_AUDIO_VOL_UP) when I compiled firmware with those codes the keys mapped to them would just do nothing, the rest of the keys worked normally.About QMK pcb, I will upload it in the next few days. :D :D
Post by: Simen on Fri, 27 December 2019, 10:10:33
If any problems you have, please do not hesitate to contact me via emails. :) :)
Post by: regionfree on Fri, 27 December 2019, 19:36:40
Just finish the build. love it :-*
Sorry but I’m gonna be copying this setup!
Post by: kiyoboard on Fri, 27 December 2019, 20:02:22
Post by: Simen on Sat, 28 December 2019, 07:33:11
Here is another typing video. It is indeed a very beautiful keyboard.Wow
It was very good and thank you for your feedback！！！ :thumb: :thumb:
Post by: proboy84 on Sun, 29 December 2019, 01:06:22
Just finish the build. love it :-*Wow, it looks so good！！！
:thumb: :thumb:
Thank!!
Btw, will square65 have a international GB?
Post by: regionfree on Sun, 29 December 2019, 21:40:56
[attach=1]
[attach=2]
[attach=3]
[attach=4]
[attach=5]
[attach=6]
[attach=7]
Post by: Simen on Mon, 30 December 2019, 07:22:13
Impressed with the packaging and the finish! Thank you very much, Simen!Thank you very much for your feedback, I am proud of it :thumb: :thumb:
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
Post by: Simen on Tue, 31 December 2019, 01:19:11
Sorry，the GB was only in China. :D :DJust finish the build. love it :-*Wow, it looks so good！！！
:thumb: :thumb:
Post by: Morgan3Wheeler on Wed, 08 January 2020, 09:28:06
Thanks.
Post by: TeeAreEffedUp on Fri, 10 January 2020, 08:56:08
Just curious when you think you’re going to be sending out the last few boards?
Post by: Simen on Sat, 11 January 2020, 10:02:27
Hey Simen,I'm so sorry, I will send you the square 80 in these days. :-[
Just curious when you think you’re going to be sending out the last few boards?
Post by: Simen on Sat, 11 January 2020, 10:04:30
sent e-mail to you, please check.Hi, I have responded to your email. :D
Thanks.
Post by: mahogany_slide on Sat, 07 March 2020, 15:18:13
Post by: matrixzj on Sat, 07 March 2020, 19:03:03
Is it not possible to remap keys for the RGB Hot Swappable PCB WK Layout version of the board? I am having a hard time making heads or tails of the QMK WK download but I realized since there are specific versions for QMK PCB that I may not be doing the correct thing.
As I know, it is not compatible with QMK. It can be programmed with a specific software.
Post by: Simen on Sun, 08 March 2020, 03:48:23
Is it not possible to remap keys for the RGB Hot Swappable PCB WK Layout version of the board? I am having a hard time making heads or tails of the QMK WK download but I realized since there are specific versions for QMK PCB that I may not be doing the correct thing.Hello，
Following are the links where you can download the driver software to control RGB backlighting of SQUARE 80, as well as QMK source codes for both WK and WKL versions.
RGB backlighting driver software: https://1drv.ms/u/s!AtOD8Cgk3QnRglB9HdMRQ5F5GqMc?e=papmWN
(Only a Windows version of the software is provided for the moment. Mac users please use key combos on-board if you want to adjust the backlighting.) The first key at the right of the space is FN.
QMK source codes: https://1drv.ms/u/s!AtOD8Cgk3QnRglKia89nto4nEw2e?e=Y6he5a
FN Shortcut
FN+1： My Computer
FN+2： HOMEPAGE
FN+3： MAIL
FN+4： MUSIC PLAYER
FN+5： Previous
FN+6： Next
FN+7： PLAY / PAUSE
FN+8： STOP
FN+9： VOLUME UP
FN+10： VOLUME DOWN
FN+11： MUTE
FN+12： CALCULATOR
Lighting control
FN+Scrlk： RGB MODE SWITCH
FN+1/2/3`````0：RGB MODE SWITCH
FN+（↓）（↑）：RGB Light brighten / darken，5 Grades
FN+（←）（→）：RGB Speed Up / Down. 5 Grades
FN+Left WIN：WIN LOCK The third indicator light will be turn on.
FN+ESC：Hold it 3 seconds, RGB lights will be flashed 5 times and restored as default setting.
Post by: mahogany_slide on Sun, 08 March 2020, 18:06:28
Is it not possible to remap keys for the RGB Hot Swappable PCB WK Layout version of the board? I am having a hard time making heads or tails of the QMK WK download but I realized since there are specific versions for QMK PCB that I may not be doing the correct thing.Hello，
Following are the links where you can download the driver software to control RGB backlighting of SQUARE 80, as well as QMK source codes for both WK and WKL versions.
RGB backlighting driver software: https://1drv.ms/u/s!AtOD8Cgk3QnRglB9HdMRQ5F5GqMc?e=papmWN
(Only a Windows version of the software is provided for the moment. Mac users please use key combos on-board if you want to adjust the backlighting.) The first key at the right of the space is FN.
QMK source codes: https://1drv.ms/u/s!AtOD8Cgk3QnRglKia89nto4nEw2e?e=Y6he5a
FN Shortcut
FN+1： My Computer
FN+2： HOMEPAGE
FN+3： MAIL
FN+4： MUSIC PLAYER
FN+5： Previous
FN+6： Next
FN+7： PLAY / PAUSE
FN+8： STOP
FN+9： VOLUME UP
FN+10： VOLUME DOWN
FN+11： MUTE
FN+12： CALCULATOR
Lighting control
FN+Scrlk： RGB MODE SWITCH
FN+1/2/3`````0：RGB MODE SWITCH
FN+（↓）（↑）：RGB Light brighten / darken，5 Grades
FN+（←）（→）：RGB Speed Up / Down. 5 Grades
FN+Left WIN：WIN LOCK The third indicator light will be turn on.
FN+ESC：Hold it 3 seconds, RGB lights will be flashed 5 times and restored as default setting.
Ok I wasn't sure if that was just for controlling the lighting or all key bindings. Any particular reason that the Function key cannot be remapped. It's a little odd that the alt keys are offset.
Post by: outerspace on Sun, 08 March 2020, 21:41:54
Post by: Morgan3Wheeler on Thu, 12 March 2020, 07:09:55
(https://i.imgur.com/YVGnLR1.jpg)
Post by: Simen on Sat, 14 March 2020, 12:41:10
Can I change the position of FN and ALT with QMK?sure, you can :thumb:Show Image(https://i.imgur.com/YVGnLR1.jpg)
Post by: Simen on Sat, 14 March 2020, 12:44:13
What are the chances of a R2? :-)There are no plans in this regard, please look forward to the new IC in the near future :thumb:
Post by: Simen on Sat, 14 March 2020, 13:38:45
[attachimg=1]
[attachimg=2]
[attachimg=3]
[attachimg=4]
Post by: outerspace on Sat, 14 March 2020, 17:50:33
What are the chances of a R2? :-)There are no plans in this regard, please look forward to the new IC in the near future :thumb:
Eagerly waiting! And saving all my lunch money now ;-)
Post by: Simen on Sat, 14 March 2020, 23:39:54
What are the chances of a R2? :-)There are no plans in this regard, please look forward to the new IC in the near future :thumb:
Eagerly waiting! And saving all my lunch money now ;-)
A new IC was started, which comes same elements of Square Series. Have a look, please :)
https://geekhack.org/index.php?topic=105145.0
Post by: Morgan3Wheeler on Mon, 16 March 2020, 11:10:44
Can I change the position of FN and ALT with QMK?sure, you can :thumb:Show Image(https://i.imgur.com/YVGnLR1.jpg)
That PCb is RGB Hot Swappable PCB WK Layout, You mean that PCB possible to be remapped with QMK?
Post by: junwon9710 on Tue, 28 April 2020, 18:41:16
edited: Simen helped me on this one, i think he is the best. Now, I just can't wait for Square 60.
Post by: Simen on Thu, 07 May 2020, 07:25:01
My pcb is not functioning well, i really need an extra pcb. can I please purchase an extra pcb?This is what i should :D
edited: Simen helped me on this one, i think he is the best. Now, I just can't wait for Square 60.
Post by: cattharsis on Fri, 15 May 2020, 21:32:44
Post by: jjethro on Tue, 26 May 2020, 09:45:24
I currently own a square80 and the usb-c port on the pcb is giving me issues. Plugging the usb-c cable into the pcb doesn't work and I have to kind of "push" the cable up after it is plugged in for the keyboard to actually work, but, the moment I stop pushing it the keyboard just disconnects again. I'm guessing the contact points on the usb c port is either faulty or the connection is kind of loose somehow? Not experiencing this issue with my other boards and was wondering if there are any spare square80 PCBs leftover from the group buy that I could buy, or whether there are any other compatible pcbs that could be used?
Post by: smeff on Thu, 18 June 2020, 23:57:25
Post by: TheGenericAsian on Fri, 19 June 2020, 06:16:30
Will there be another Square 80% group buy?
Doesn't look like they've done a rerun of any of their keyboards so far so I wouldn't count on it. At least, not in the near future since the 60% GB is coming up
Post by: mrtnsu on Thu, 08 October 2020, 01:25:47
Was it also 4mm?