[IC] Mech27-TKL | Custom Aluminum Keyboard [Launching]

[laughatpain]

No one trusts Sprit or GON....
Just go with winkeyless(beastmask) or leeku.

GON showed he was cable of a GB for PCBs with Leandren's R4 GB albeit they were 60% PCBs.

[27]

No one trusts Sprit or GON....
Just go with winkeyless(beastmask) or leeku.

GON showed he was cable of a GB for PCBs with Leandren's R4 GB albeit they were 60% PCBs.

Leeku has all the features I need, and a pretty good price, so it looks like I'll be using the TX87.

[laughatpain]

No one trusts Sprit or GON....
Just go with winkeyless(beastmask) or leeku.

GON showed he was cable of a GB for PCBs with Leandren's R4 GB albeit they were 60% PCBs.

Leeku has all the features I need, and a pretty good price, so it looks like I'll be using the TX87.

Will he be doing diodes? My MX TX87 was already done, but the Alps one I got I had to do myself.

If not maybe theyre something you can source for a cheaper price for everyone. Then again there is the whole cylinder vs rectangle debate.

[27]

No one trusts Sprit or GON....
Just go with winkeyless(beastmask) or leeku.

GON showed he was cable of a GB for PCBs with Leandren's R4 GB albeit they were 60% PCBs.

Leeku has all the features I need, and a pretty good price, so it looks like I'll be using the TX87.

Will he be doing diodes? My MX TX87 was already done, but the Alps one I got I had to do myself.

If not maybe theyre something you can source for a cheaper price for everyone. Then again there is the whole cylinder vs rectangle debate.

Yupp, diodes, resistors, AND the RGB underlighting will all be presoldered.

[ScottieLK]

No one trusts Sprit or GON....
Just go with winkeyless(beastmask) or leeku.

GON showed he was cable of a GB for PCBs with Leandren's R4 GB albeit they were 60% PCBs.

Leeku has all the features I need, and a pretty good price, so it looks like I'll be using the TX87.

Will he be doing diodes? My MX TX87 was already done, but the Alps one I got I had to do myself.

If not maybe theyre something you can source for a cheaper price for everyone. Then again there is the whole cylinder vs rectangle debate.

Yupp, diodes, resistors, AND the RGB underlighting will all be presoldered.

That's awesome that that will all be predone, but what do you mean by under lighting?

[27]

No one trusts Sprit or GON....
Just go with winkeyless(beastmask) or leeku.

GON showed he was cable of a GB for PCBs with Leandren's R4 GB albeit they were 60% PCBs.

Leeku has all the features I need, and a pretty good price, so it looks like I'll be using the TX87.

Will he be doing diodes? My MX TX87 was already done, but the Alps one I got I had to do myself.

If not maybe theyre something you can source for a cheaper price for everyone. Then again there is the whole cylinder vs rectangle debate.

Yupp, diodes, resistors, AND the RGB underlighting will all be presoldered.

That's awesome that that will all be predone, but what do you mean by under lighting?

Similar to the underlighting on the winkeyless.kr b-series boards.  It's rgb leds on the bottom side of the pcb.

[27]

Quick update

I have a price for the GB maximum order quantity, which will be 100 boards.  It'll be $280USD (Includes a $10 donation to GH) + PP fees (2.9% + $0.30) + shipping (~$35 CONUS, ~$60 International)

I'm working on the price for the MOQ, which is 50 boards. I don't expect it too cost too much more than the 100.

All boards will come in a stamped cardboard box with all components inside of a plastic bag and encased in custom cut foam.  I'll provide a business card with your order details and the number out of 100 that your board is.

I'll be opening up limited deposits (20 people) in order to help finance a new prototype once I receive the price on 50 units. The deposit is a $35 minimum, but you're more than welcome to put down more, since it's helping get the next prototype made.  Those who put a deposit down will be able to reserve the number board of their choosing.

The Groupbuy Will Not Open Until Mid-September
I will be moving September 2nd, and will need to figure out shipping to myself in dorms.

[27]

Plus renders of the (semi)finalized design.

http://imgur.com/a/GrXVy

[Damonskv]

Quick update

I have a price for the GB maximum order quantity, which will be 100 boards.  It'll be $300USD (Includes a $10 donation to GH) + PP fees (2.9% + $0.30) + shipping (~$35 CONUS, ~$60 International)

I'm working on the price for the MOQ, which is 50 boards. I don't expect it too cost too much more than the 100.

All boards will come in a stamped cardboard box with all components inside of a plastic bag and encased in custom cut foam.  I'll provide a business card with your order details and the number out of 100 that your board is.

I'll be opening up limited deposits (15 people) in order to help finance a new prototype once I receive the price on 50 units. The deposit is a $35 minimum, but you're more than welcome to put down more, since it's helping get the next prototype made.  Those who put a deposit down will be able to reserve the number board of their choosing.

The Groupbuy Will Not Open Until Mid-September
I will be moving September 2nd, and will need to figure out shipping to myself in dorms.

How to make deposit?

[27]

Quick update

I have a price for the GB maximum order quantity, which will be 100 boards.  It'll be $300USD (Includes a $10 donation to GH) + PP fees (2.9% + $0.30) + shipping (~$35 CONUS, ~$60 International)

I'm working on the price for the MOQ, which is 50 boards. I don't expect it too cost too much more than the 100.

All boards will come in a stamped cardboard box with all components inside of a plastic bag and encased in custom cut foam.  I'll provide a business card with your order details and the number out of 100 that your board is.

I'll be opening up limited deposits (15 people) in order to help finance a new prototype once I receive the price on 50 units. The deposit is a $35 minimum, but you're more than welcome to put down more, since it's helping get the next prototype made.  Those who put a deposit down will be able to reserve the number board of their choosing.

The Groupbuy Will Not Open Until Mid-September
I will be moving September 2nd, and will need to figure out shipping to myself in dorms.

How to make deposit?

I'll be opening a google form and posting it in the revamped OP hopefully tomorrow around this time.

[JorisBoers]

Count my ass in on this! Looks ballin!

[joey]

Is it a true deposit? That is we get the final price - our deposit, or do we pay final price + deposit?

[27]

Is it a true deposit? That is we get the final price - our deposit, or do we pay final price + deposit?

You'll pay final price - your deposit

[duynguyenle]

Where is the deposit form? I want to give you some money 

[27]

Where is the deposit form? I want to give you some money 

It'll be posted tomorrow around 3pm-4pm EST

[27]

PRICING CORRECTION

At 100 units it will be $280, not $300.  I left an additional entry in my spreadsheet in my calculation by mistake.

[DALExSNAIL]

Ill be down for a deposit at least! 

[Fictiouz]

Definitely going to be getting in on this now that I'm in the market for a tkl. Perfect timing, love to help a fellow Canadian! 

[SevenU]

In for a deposit. I really want my number.

Sent from my KIW-L24 using Tapatalk

[kimanageer]

Could you tell me the estimated time for production and estimated ship date?
and how about the domestic shipping costs ?

[SevenU]

Could you tell me the estimated time for production and estimated ship date?
and how about the domestic shipping costs ?

The actual buy isn't opening until mid-september and shipping to US is 35 dollars.

Sent from my KIW-L24 using Tapatalk

[nguyenkimtam]

In for a deposit too


Sent from my iPhone using Tapatalk

[maximm]

Where is this badboy being made? Korea or China?

[27]

Hey guys, just a quick update.

Prices are:
100 - $280
50 - $300

Unfortunately there will be an additional $20-$30 per order to help cover freight from the factory to me.

I won't be opening the deposit form for a couple of days due to a death in the family early this morning and now I have to help sort that out.  I'll update as soon as I know when I'm going to be taking the deposits.

[27]

Where is this badboy being made? Korea or China?

This is being made in China.

[duynguyenle]

Hey guys, just a quick update.

Prices are:
100 - $280
50 - $300

Unfortunately there will be an additional $20-$30 per order to help cover freight from the factory to me.

I won't be opening the deposit form for a couple of days due to a death in the family early this morning and now I have to help sort that out.  I'll update as soon as I know when I'm going to be taking the deposits.

Sorry for your loss, take your time... 

Will you ever consider Winkey layouts or is this exclusively WKL?

[27]

Hey guys, just a quick update.

Prices are:
100 - $280
50 - $300

Unfortunately there will be an additional $20-$30 per order to help cover freight from the factory to me.

I won't be opening the deposit form for a couple of days due to a death in the family early this morning and now I have to help sort that out.  I'll update as soon as I know when I'm going to be taking the deposits.

Sorry for your loss, take your time... 

Will you ever consider Winkey layouts or is this exclusively WKL?

v1 is winkeyless only.  v2 might be winkey, whenever that happens.

[OfTheWild]

Sorry to hear about your loss.

I'm excited about this project. The new renders look great by the way.

[Jin]

looks great

[27]

Hey everyone, just finished all of the nasty funeral stuff, I'll try to get something figured out this weekend for deposits.

[27]

Opened up deposits for the board!

[joey]

Submitted!

[xvetter]

Submitted 

[boo]

Submitted


Sent from my iPhone using Tapatalk

[FrostyToast]

I really don't care about the number because I have discovered, in my previous endeavors, that reserving numbers for boards is a dumb idea.
I just put 1/1/1 down so I'll probably end up with some other random number.

[SevenU]

Submitted

Sent from my KIW-L24 using Tapatalk

[KetchyKech]

submitted, but dunno if i forgot to add my paypal LOL -- pm me if thats the case!! 

[27]

submitted, but dunno if i forgot to add my paypal LOL -- pm me if thats the case!! 

It's there, no worries

[27]

I've started sending out requests for the deposits, and I'll close the deposit form tomorrow night I think.

[Hexterdude]

DEPOSIT PAID

[boo]

Paid deposit.

Will you tell us what numbers we got?

[27]

Paid deposit.

Will you tell us what numbers we got?

I'll post who got what after I get most of the deposits

[Oatburner]

submitted

[romevi]

Yeah, can't wait for this!

[loud_asian]

stuck between choosing this or the mira 

[jaffers]

stuck between choosing this or the mira 

I want to hear a sound file of you living up to your user name

[loud_asian]

stuck between choosing this or the mira 

I want to hear a sound file of you living up to your user name

I yell a lot when I play overwatch, maybe I should record a skype session some day 

[duynguyenle]

Stuck at work but I'll get to the invoice as soon as I get home from work today (UK time)

[jaffers]

stuck between choosing this or the mira 

I want to hear a sound file of you living up to your user name

I yell a lot when I play overwatch, maybe I should record a skype session some day 

meebe you could join the geekhack discord

[joey]

Stuck at work but I'll get to the invoice as soon as I get home from work today (UK time)

Woo, two Mech27-TKLs in the UK!