Author Topic: [LF/FT] Bros [FS] Nikon Flash Trigger (Read 125910 times)

swill · « **on:** Wed, 16 October 2013, 00:22:21 »

All artisans are for trade only. I do not sell them...

All MX

All Topre

Topre

[LF]

Tahiti v2 Bro (MX pref, but Topre as well)
Interstellar Blue V2 (MX)
Interstellar Pink V2 (MX)
Solid Purple v2 Bro (MX - to match my set)
Metallic Blue v2 Bro (Topre)
Any Metallic v2 Bro (Topre - pm me to see what I am missing)

[FT]

BroCaps Blackout Matte v2 (Topre)
I will entertain other trades, but I am very fond of my V2 collection...

[FS]
(total price will be the price listed below +4% for paypal fees)

Round 5 TKL Set - $65 + shipping
GMK Mods pictured above. $27 + shipping
YONGNUO RF-603N wireless flash trigger for Nikon (NIB) - $25 shipped to North America
I purchased these because I was told they worked with Pentax. That is not the case and since I do not have an off camera flash for my Nikon, I don't need these.

[sold or traded]

More

Have new homes...
More
Round 5 TKL Set - $65 + shipping (only includes what is pictured below)
GMK - $27 + shipping for all of them
GMK Dolch - $140 (extra GMK keys also available)
I am having second thoughts as I write this, but honestly I could use the money and I have to many keycaps right now. This includes all the keys in the base set and the other GMK keys in this picture could also be added at cost if you are interested. Just let me know what you are interested in and I will figure out what I paid for them. Sorry for the potato pic...
Granite DSA Keycaps
More
Blank set of Thick PBT keycaps from this GB - $65 shipped (sold)
Tai Hao Full Sets, including 6.25 spacebar, one of each color. $15 + shipping each ~~OR $75 including shipping for all of them...~~
I am splitting up the keycaps and selling them individually at this point because I have interest in all/most of the sets.
~~Blue (sold)~~, ~~Red (sold)~~, ~~Green (shipped)~~, ~~Yellow (shipped)~~, ~~Black (picked up)~~

~~I would prefer to sell all the sets together, so I will give people till Wednesday, Dec 4th to purchase all sets together. After Wednesday I will start selling the sets individually.~~
~~I believe I have interest in all the sets now; confirming... If I do, I will split them up right away.~~
Traded to Cptn
More

ComradeSniper · « **Reply #1 on:** Wed, 16 October 2013, 00:39:21 »

Good luck, I searched around for one for a while and eventually caved and bought one from EK.

rowdy · « **Reply #2 on:** Wed, 16 October 2013, 01:14:18 »

Now that you have at least 60 posts, you can post a WTB thread in Classifieds and see if anyone responds.

Although there are one or two such threads there already.

Keep an eye on Classifieds in case one appears.

Check online auction sites regularly (where I got mine from, $180).

longweight · « **Reply #3 on:** Wed, 16 October 2013, 01:54:54 »

Where are you based?

SpAmRaY · « **Reply #4 on:** Wed, 16 October 2013, 07:02:59 »

Quote from: rowdy on Wed, 16 October 2013, 01:14:18

Now that you have at least 60 posts, you can post a WTB thread in Classifieds and see if anyone responds.

Although there are one or two such threads there already.

Keep an eye on Classifieds in case one appears.

Check online auction sites regularly (where I got mine from, $180).

Isn't that what this is? I am confused

swill · « **Reply #5 on:** Wed, 16 October 2013, 10:15:11 »

Quote from: longweight on Wed, 16 October 2013, 01:54:54

Where are you based?

Im in Montreal, Canada. Not sure of the shipping costs from the UK. PM me if you think we can work something out. I know you are looking for trades as well. Unfortunately the only thing I would be able to trade would be a 3 week old White Filco Ninja 104 w/ Red switches.

redskull · « **Reply #6 on:** Wed, 16 October 2013, 22:41:28 »

Quote from: swill on Wed, 16 October 2013, 10:15:11

Quote from: longweight on Wed, 16 October 2013, 01:54:54
Where are you based?

Im in Montreal, Canada. Not sure of the shipping costs from the UK. PM me if you think we can work something out. I know you are looking for trades as well. Unfortunately the only thing I would be able to trade would be a 3 week old White Filco Ninja 104 w/ Red switches.

you can try buying directly from amazon japan using tenso.com as your proxy. i got mine that way and its $50 cheaper than getting from EK. i live in asia btw, you can calculate first the costs according to your location though.

swill · « **Reply #7 on:** Tue, 05 November 2013, 19:44:40 »

Pacifist · « **Reply #8 on:** Tue, 05 November 2013, 20:01:48 »

Quote from: redskull on Wed, 16 October 2013, 22:41:28

Quote from: swill on Wed, 16 October 2013, 10:15:11
Quote from: longweight on Wed, 16 October 2013, 01:54:54
Where are you based?

Im in Montreal, Canada. Not sure of the shipping costs from the UK. PM me if you think we can work something out. I know you are looking for trades as well. Unfortunately the only thing I would be able to trade would be a 3 week old White Filco Ninja 104 w/ Red switches.
you can try buying directly from amazon japan using tenso.com as your proxy. i got mine that way and its $50 cheaper than getting from EK. i live in asia btw, you can calculate first the costs according to your location though.

How can it be $50 cheaper? How much of a hike does EK do?

zyxer_raffy · « **Reply #9 on:** Wed, 06 November 2013, 06:24:42 »

I got 4 Sets of Tai Hao (Green, Red, Blue and Yellow). I think elton didn't ship it yet. If you're online, leave me a note. Thanks!

chel- · « **Reply #10 on:** Wed, 06 November 2013, 09:20:07 »

Quote from: redskull on Wed, 16 October 2013, 22:41:28

Quote from: swill on Wed, 16 October 2013, 10:15:11
Quote from: longweight on Wed, 16 October 2013, 01:54:54
Where are you based?

Im in Montreal, Canada. Not sure of the shipping costs from the UK. PM me if you think we can work something out. I know you are looking for trades as well. Unfortunately the only thing I would be able to trade would be a 3 week old White Filco Ninja 104 w/ Red switches.
you can try buying directly from amazon japan using tenso.com as your proxy. i got mine that way and its $50 cheaper than getting from EK. i live in asia btw, you can calculate first the costs according to your location though.

I did that before and it was cheaper for me as well. I think amazon.jp increased the prices by ~$20 since then though.

swill · « **Reply #11 on:** Fri, 08 November 2013, 19:13:26 »

Shameless bump...

swill · « **Reply #12 on:** Sat, 09 November 2013, 19:15:22 »

Updated... Please help me find a replacement Filco TKL controller and plate with cutouts. Thx...

tjweir · « **Reply #13 on:** Sun, 10 November 2013, 03:52:09 »

I have an extra HID Lib controller.

swill · « **Reply #14 on:** Wed, 27 November 2013, 15:40:40 »

Bump... Still trying to find a Filco TKL compatible plate with cutouts...

swill · « **Reply #15 on:** Sat, 30 November 2013, 10:37:33 »

Added full sets (including 6.25 spacebar) of Tai Hao keycaps.

I would prefer to sell all of the keycaps together. I will give someone till Wednesday to buy all of the keycaps together, after which I will start selling the sets individually. I already have interest in the Blue and Red sets...

If you are interested in only one set, PM me and I will give you priority for that set if no one buys all of the sets by Wednesday (Dec 4th).

goobus · « **Reply #16 on:** Sat, 30 November 2013, 10:52:58 »

GLWS! Pardon my ignorance, but does the Tai Hao set come with stepped caps lock?

keymaster · « **Reply #17 on:** Sat, 30 November 2013, 11:01:33 »

Interested in black set.

swill · « **Reply #18 on:** Sat, 30 November 2013, 11:18:36 »

Quote from: goobus on Sat, 30 November 2013, 10:52:58

GLWS! Pardon my ignorance, but does the Tai Hao set come with stepped caps lock?

That is actually a really good question and I don't know the answer. I will have to check when I get home tonight. I will get back to you on that.

swill · « **Reply #19 on:** Sun, 01 December 2013, 11:00:32 »

Quote from: swill on Sat, 30 November 2013, 11:18:36

Quote from: goobus on Sat, 30 November 2013, 10:52:58
GLWS! Pardon my ignorance, but does the Tai Hao set come with stepped caps lock?

That is actually a really good question and I don't know the answer. I will have to check when I get home tonight. I will get back to you on that.

I looked through a bag of caps this morning and it does not look like there is a stepped caps lock...

goobus · « **Reply #20 on:** Sun, 01 December 2013, 13:17:56 »

Thanks!

gh_pp · « **Reply #21 on:** Sun, 01 December 2013, 18:44:00 »

deleted. my apology for acting hazily

swill · « **Reply #22 on:** Sun, 01 December 2013, 18:50:38 »

Quote from: gh_pp on Sun, 01 December 2013, 18:44:00

pm'ed for the taihao collection

~~Invoice sent...~~ They had a change of heart... => KS by GMK Handarbeit

Nyreene · « **Reply #23 on:** Sun, 01 December 2013, 23:38:03 »

I'd be interested in the yellow key set if you can't find anyone to buy the whole bundle.

AKmalamute · « **Reply #24 on:** Sun, 01 December 2013, 23:50:38 »

likewise I'll probably want the green set, if you end up selling them separately that way. Might be Thur/Fri before I can buy them though.

You mention a filco plate ... do you have much experience working with them? I'm hoping to stuff a phantom into an official Filco case using the (plate mounted) switches lying around. Do you know if I'll need a special 'thing to look for on a potential plate so it will interface both the phantom board and the filco case properly?

Anyway, GLWS

swill · « **Reply #25 on:** Mon, 02 December 2013, 00:33:36 »

I should just split them up... I have buyers for all caps if I sell them individually.

Tomorrow evening I will verify that I have buyers for them all, if I do, I will just split them up and not wait till wednesday.

swill · « **Reply #26 on:** Mon, 02 December 2013, 00:36:43 »

Quote from: AKmalamute on Sun, 01 December 2013, 23:50:38

likewise I'll probably want the green set, if you end up selling them separately that way. Might be Thur/Fri before I can buy them though.

You mention a filco plate ... do you have much experience working with them? I'm hoping to stuff a phantom into an official Filco case using the (plate mounted) switches lying around. Do you know if I'll need a special 'thing to look for on a potential plate so it will interface both the phantom board and the filco case properly?

Anyway, GLWS

I don't have much experience with changing the plates. I believe one of the phantom plates fits a Filco case, but not the one with ears from what I understand (like what The Beast is selling).

reziak · « **Reply #27 on:** Tue, 03 December 2013, 04:42:18 »

Hey, interested in the red set

swill · « **Reply #28 on:** Tue, 03 December 2013, 10:27:02 »

Quote from: reziak on Tue, 03 December 2013, 04:42:18

Hey, interested in the red set

There are a couple people interested in the red set so far. I will let you know if it becomes available.

ioXt_2 · « **Reply #29 on:** Tue, 03 December 2013, 11:07:45 »

Let me know if you have any buyer who backs out on one of the colored set, I might be interested. BTW, I'm also in Montreal. (Je parle français)

pcandkbguy · « **Reply #30 on:** Tue, 03 December 2013, 11:43:15 »

really interested in the blue and green

swill · « **Reply #31 on:** Tue, 03 December 2013, 12:13:08 »

Quote from: ioXt_2 on Tue, 03 December 2013, 11:07:45

Let me know if you have any buyer who backs out on one of the colored set, I might be interested. BTW, I'm also in Montreal. (Je parle français)

Right now I have PMs out to a lot of people to verify their interest. If any kits become available I will let you know.

Cheers,

Will

duq · « **Reply #32 on:** Tue, 03 December 2013, 14:22:14 »

Hello,

I have a phantom ansi125 plate. Will that suffice?

Duq

swill · « **Reply #33 on:** Tue, 03 December 2013, 16:06:02 »

Quote from: duq on Tue, 03 December 2013, 14:22:14

Hello,

I have a phantom ansi125 plate. Will that suffice?

Duq

Does it have the controller cutout above the arrow keys?

Edit: like this...
_________
| ___ |
|_| |_|

duq · « **Reply #34 on:** Wed, 04 December 2013, 01:10:07 »

Quote from: swill on Tue, 03 December 2013, 16:06:02

Quote from: duq on Tue, 03 December 2013, 14:22:14
Hello,

I have a phantom ansi125 plate. Will that suffice?

Duq

Does it have the controller cutout above the arrow keys?

Edit: like this...
_________
| ___ |
|_| |_|

Awww... No it does not. Sorry! Forgot about that.

phillyd · « **Reply #35 on:** Thu, 05 December 2013, 14:04:05 »

Interested in the black set if you still have them.

swill · « **Reply #36 on:** Thu, 05 December 2013, 15:35:32 »

Quote from: phillyd on Thu, 05 December 2013, 14:04:05

Interested in the black set if you still have them.

I will give the pending people till tomorrow to get back to me, if they don't the black set will be yours...

Cheers...

swill · « **Reply #37 on:** Fri, 06 December 2013, 11:51:38 »

Update: All Tai Hao sets have been sold.

jonathanyu · « **Reply #38 on:** Fri, 06 December 2013, 12:04:14 »

You can get my clear from mechanicalkeyboard.com

swill · « **Reply #39 on:** Fri, 06 December 2013, 12:23:47 »

Quote from: jonathanyu on Fri, 06 December 2013, 12:04:14

You can get my clear from mechanicalkeyboard.com

They changed their shipping options for Canada, it is now only $10 instead of $18. That makes the price a bit more realistic...

swill · « **Reply #40 on:** Fri, 13 December 2013, 10:51:34 »

Added blank thick PBT keycaps...

riotonthebay · « **Reply #41 on:** Fri, 13 December 2013, 10:55:28 »

PM'd about the keycaps!

riotonthebay · « **Reply #42 on:** Fri, 13 December 2013, 11:33:30 »

Boy, do I feel lucky to have checked classifieds 4 minutes after these went up…

swill · « **Reply #43 on:** Fri, 13 December 2013, 12:09:12 »

Quote from: riotonthebay on Fri, 13 December 2013, 11:33:30

Boy, do I feel lucky to have checked classifieds 4 minutes after these went up…

Fastest sale ever. From posting the ad to shipped in less than an hour. Enjoy the keycaps. The same keycaps are my daily driver and I love them...

stancato9 · « **Reply #44 on:** Fri, 13 December 2013, 17:28:55 »

http://geekhack.org/index.php?topic=52270.0

jcrouse has GH60 pbs and plates for sale.

swill · « **Reply #45 on:** Thu, 26 December 2013, 15:29:12 »

Looking for switch stickers if anyone has some I can buy...

swill · « **Reply #46 on:** Tue, 31 December 2013, 16:29:05 »

Please PM me if you have switch stickers I can buy...

JayKthnx · « **Reply #47 on:** Tue, 31 December 2013, 20:16:53 »

Techkeys has stickers available here.

domoaligato · « **Reply #48 on:** Wed, 08 January 2014, 12:13:42 »

Quote from: JayKthnx on Tue, 31 December 2013, 20:16:53

Techkeys has stickers available here.

exactly my thoughts.

free bump.

swill · « **Reply #49 on:** Wed, 08 January 2014, 12:16:57 »

Quote from: domoaligato on Wed, 08 January 2014, 12:13:42

Quote from: JayKthnx on Tue, 31 December 2013, 20:16:53
Techkeys has stickers available here.

exactly my thoughts. free bump.

$7 before shipping for 120 switch stickers is retardedly expensive.

I ended up getting ~500 for $16 and forgot to update the thread.

Thanks...

News:

Author Topic: [LF/FT] Bros [FS] Nikon Flash Trigger (Read 125910 times)