Looks nice! any pics of the assembly blown up? is it going to be unmarked completely on the outside or plan on putting a logo?No pics of it blown up sorry, and no logos or branding except for the hidden "27" on the plate.
Will there be enough height to assemble the board without the diffuser? LEDs are fun for about five seconds.
Is it basically bring your own PCB? love the idea, and basically my favorite layout so very likely down for one
Is it basically bring your own PCB? love the idea, and basically my favorite layout so very likely down for one
PCB being used is mentioned in the "Gimme the deets" section of the OP.
It's the GON NerD TKL, so fully programmable.
Do I have to use GON PCB? will Winkeyless PCB work as well?
I'm in. Thank God I won't have to pay shipping.$$$$$ so rich
I'm in. Thank God I won't have to pay shipping.$$$$$ so rich
nice keyboard!
<3I'm in. Thank God I won't have to pay shipping.$$$$$ so rich
nice keyboard!
I honestly have no need for this but I'm supporting a local.
Do I have to use GON PCB? will Winkeyless PCB work as well?
If it's the A.87 version with the usb between F12 and Printscreen it should.
really hope this would made in color other than black, grey, or silver.
Looks great. Wonder if winkey will be supported?
Looks great. Wonder if winkey will be supported?
No winkey, sorry.
really hope this would made in color other than black, grey, or silver.
Where are you getting this manufactured and anodized for 350 per kit at a production run of 50?
is this got RGB led at the side
Looks great. Wonder if winkey will be supported?
No winkey, sorry.
Looks great. Wonder if winkey will be supported?
No winkey, sorry.
Good to see a designer protect superior aesthetics.
If there is an option for an opaque or unfrosted clear acrylic insert - count me in.
And if you don't mind sharing, what was the color you had in mind for yours?
Lol, that might work.Looks great. Wonder if winkey will be supported?
No winkey, sorry.
winkey option :Show Image(https://upload.wikimedia.org/wikipedia/commons/6/6b/Tool-hacksaw.jpg)
It looks great! :thumb: Will there be a weight piece?
Do you have an estimate of how long until the group buy stage? Also will diodes and resistors be soldered in?
Looks great :D
New renders and a new idea! I need to know what everyone things of this, yay or nay? Obviously would increase the price, but I don't know by how much.Show Image(http://i.imgur.com/taI9cEM.png)Show Image(http://imgur.com/SlfJvo6.png)Show Image(http://imgur.com/BOk2nsk.png)Show Image(http://imgur.com/vEFobne.png)
That weight will be expensive. The Mira had to change from a single piece weight to using 3 connected pieces.
That change allowed each piece of the weight to have very simple cuts.
Machining that piece from one slab will be quote expensive and it will be unwise to separate them into multiple pieces. Those hexagons have to be oriented properly to fit in the case and therefore cannot be cut as separate pieces and screwed down unless the threads are precisely machined.
That weight will be expensive. The Mira had to change from a single piece weight to using 3 connected pieces.
That change allowed each piece of the weight to have very simple cuts.
Machining that piece from one slab will be quote expensive and it will be unwise to separate them into multiple pieces. Those hexagons have to be oriented properly to fit in the case and therefore cannot be cut as separate pieces and screwed down unless the threads are precisely machined.
Thanks for the advice! I'll definitely be looking into it a lot. Just throwing around ideas right now :)
I'll also look at different materials for it, other than brass.
New renders and a new idea! I need to know what everyone things of this, yay or nay? Obviously would increase the price, but I don't know by how much.Show Image(http://i.imgur.com/taI9cEM.png)Show Image(http://imgur.com/SlfJvo6.png)Show Image(http://imgur.com/BOk2nsk.png)Show Image(http://imgur.com/vEFobne.png)
Looking great mate! Obviously if the price isn't substantial I reckon go for it :) You may need to radius the corners on those hexagons so the inner corner (on the enclosure) can be properly machined, but yeah, looks sweeet!
That weight will be expensive. The Mira had to change from a single piece weight to using 3 connected pieces.
That change allowed each piece of the weight to have very simple cuts.
Machining that piece from one slab will be quote expensive and it will be unwise to separate them into multiple pieces. Those hexagons have to be oriented properly to fit in the case and therefore cannot be cut as separate pieces and screwed down unless the threads are precisely machined.
Thanks for the advice! I'll definitely be looking into it a lot. Just throwing around ideas right now :)
I'll also look at different materials for it, other than brass.
Stainless steel is the second most poplar weight material.
Also, do listen to Rama about having rounded off edges for the hexagons.
Due to the bits of cnc machines being circular, inner cuts have to be rounded at a minimum equal to the radius of the bit.
I'm digging the hexagons, can't say the same about the rectangular one. I think just having the numbers would look better than numbers + letters
I'm digging the hexagons, can't say the same about the rectangular one. I think just having the numbers would look better than numbers + letters
I'm digging the hexagons, can't say the same about the rectangular one. I think just having the numbers would look better than numbers + letters
What FrostyToast said. They're the same piece, just different sides of it. The larger rectangular part is inside the case, and will only be seen with the top removed.
Even more new renders!Show Image(http://i.imgur.com/PFtxzuV.png)Show Image(http://i.imgur.com/Ar42sCV.png)
Any chance we could get roman numerals, ex: XX2, XX7.
Any chance we could get roman numerals, ex: XX2, XX7.
Any chance we could get roman numerals, ex: XX2, XX7.
do you mean XXVII for 27? This could be cool I guess,
I like custom TKLsMe too thanks
I like custom TKLsMe too thanks
I'm really starting to get my heart set on this keyboard. For those that have joined GB for custom TKLs with a limited number of spots, how hard do you think it is going to be to get into this buy? I guess I should start keeping a very close eye on the group buys forum.iirc, 25 slots of jane ce ran out in like 10 minutes lol
Adding a partial plate optionShow Image(http://i.imgur.com/bidyLW0.png)
Should be something nice to try out.
Guess who has more renders! I know everyone is probably tired of just renders, but this should be fairly representative of the colour options.Show Image(http://i.imgur.com/NQ7sZUc.png)Show Image(http://i.imgur.com/fQbjtT6.png)Show Image(http://i.imgur.com/rHiMS6q.png)Show Image(http://i.imgur.com/w8Ns8zT.png)
Show Image(http://i.imgur.com/KrGPBMv.png)
Those renders with the brass look more like champagne gold to me.
I wonder what the real colour will be though.
Those renders with the brass look more like champagne gold to me.
I wonder what the real colour will be though.
Is that what it would be called? I was describing it as a darkish-gold.
Those renders with the brass look more like champagne gold to me.
I wonder what the real colour will be though.
Is that what it would be called? I was describing it as a darkish-gold.
It actually looks lighter than most golds I have seen.
Champagne gold is a pale light variant of gold. Perhaps the lighting in the renders is off.
these renders are phenomenal, I've never seen so many great color choices in one place when it comes to IC/GBs. Awesome :thumb:
[url=https://geekhack.org/index.php?topic=81351.0][img width=400 height=120]http://i.imgur.com/LshJ7SB.png[/img][/url]Has anyone mentioned having removal switch top support for the plate?
Was thinking, any chance you could get blue grey?
do we have red colour for this kb
idk if i've already posted here or not but i see the cyan so i'm in
i definitely want in on this, but i would like to see a color-accurate sample of the brass color. sounds very interesting!
i definitely want in on this, but i would like to see a color-accurate sample of the brass color. sounds very interesting!
Right now it's looking like it'll be very similar to champagne gold, but I'll try to see if there's some way to get a color sample. Cyan and the Brass/Gold are custom colours, so it's not like there's preexisting samples :(
i definitely want in on this, but i would like to see a color-accurate sample of the brass color. sounds very interesting!
Right now it's looking like it'll be very similar to champagne gold, but I'll try to see if there's some way to get a color sample. Cyan and the Brass/Gold are custom colours, so it's not like there's preexisting samples :(
If you do red, I'll be in. Looking to do a red TKL at some point for when Jukebox drops again.
i definitely want in on this, but i would like to see a color-accurate sample of the brass color. sounds very interesting!
Right now it's looking like it'll be very similar to champagne gold, but I'll try to see if there's some way to get a color sample. Cyan and the Brass/Gold are custom colours, so it's not like there's preexisting samples :(
If you do red, I'll be in. Looking to do a red TKL at some point for when Jukebox drops again.
Look up
Those renders with the brass look more like champagne gold to me.
I wonder what the real colour will be though.
Is that what it would be called? I was describing it as a darkish-gold.
It actually looks lighter than most golds I have seen.
Champagne gold is a pale light variant of gold. Perhaps the lighting in the renders is off.
I'll just call it gold and finalize the colour once the prototype is ready to be ordered.
Just got word that I should be seeing the v0.01 (My bad and outdated design) within the next couple of weeks, so I'll be able to judge what sort of quality this factory is providing. I'm also going to start looking into shipping solutions like custom sized boxes and cut foam.Awesome!
BOO NO ALPS >:D
My bad and outdated designYEAH. YOURS. What'd I tell you, dummy?
My bad and outdated designYEAH. YOURS. What'd I tell you, dummy?
This looks great especially the grey one, is there a cost estimate?
Any news on getting samples of the colors? would like to see that gold and cyan
Any news on getting samples of the colors? would like to see that gold and cyan
Not sure if I can get samples since those two are custom colours, but I can see how well they colour match with the sample I have coming and adjust the colours accordingly.
Any news on getting samples of the colors? would like to see that gold and cyan
Not sure if I can get samples since those two are custom colours, but I can see how well they colour match with the sample I have coming and adjust the colours accordingly.
I just know those colors are difficult to anodize, and renders can show any color you want...
Does this mean you've had a change of heart concerning Winkey? :P
Does this mean you've had a change of heart concerning Winkey? :P
Probably why he and photek think the design of the 0.1 board is so ****.
Does this mean you've had a change of heart concerning Winkey? :P
Probably why he and photek think the design of the 0.1 board is so ****.
Question: Can it be used without the defuser? Will it still fit together properly with out it?
Question: Can it be used without the defuser? Will it still fit together properly with out it?I'm not 100% sure on that one. I'll check over the files and figure that out when I'm not busy with school.
That and the front lip is way too thick.
That and the front lip is way too thick.
>tfw you tell 27 exactly how to make the design not ****
>tfw he doesn't change anything you said to changeShow Image(http://puu.sh/oSimw/641cdf4ddc.jpg)
ya dingus
That and the front lip is way too thick.
>tfw you tell 27 exactly how to make the design not ****
>tfw he doesn't change anything you said to changeShow Image(http://puu.sh/oSimw/641cdf4ddc.jpg)
ya dingus
:-* I changed it a bit, but probably not enough.
That and the front lip is way too thick.
>tfw you tell 27 exactly how to make the design not ****
>tfw he doesn't change anything you said to changeShow Image(http://puu.sh/oSimw/641cdf4ddc.jpg)
ya dingus
:-* I changed it a bit, but probably not enough.
Don't worry.
Just take a look at Photek's TEK-80 and you'll feel a little better about your giant front lip.
Don't worry.To reiterate :
Just take a look at Photek's TEK-80 and you'll feel a little better about your giant front lip.
>tfw you tell 27 exactly how to make the design not ****
>tfw he doesn't change anything you said to changeShow Image(http://puu.sh/oSimw/641cdf4ddc.jpg)
ya dingus
Show Image(https://imgur.com/SsBMQcX.jpg)
Pics will come later today or tomorrow. I might be too busy with grad tonight. I'm currently assembling a price list for the next prototype.
Show Image(https://imgur.com/SsBMQcX.jpg)
Pics will come later today or tomorrow. I might be too busy with grad tonight. I'm currently assembling a price list for the next prototype.
You're graduating tonight? From where? Uni? I thought you were only 19 or something...
Show Image(https://imgur.com/SsBMQcX.jpg)
Pics will come later today or tomorrow. I might be too busy with grad tonight. I'm currently assembling a price list for the next prototype.
You're graduating tonight? From where? Uni? I thought you were only 19 or something...
Highschool :) I'm only 18
Show Image(https://imgur.com/SsBMQcX.jpg)
Pics will come later today or tomorrow. I might be too busy with grad tonight. I'm currently assembling a price list for the next prototype.
You're graduating tonight? From where? Uni? I thought you were only 19 or something...
Highschool :) I'm only 18
What
the
heck?
Holy **** that front lip.A E S T H E T I C
You weren't lying when you said it was based off the TEK-80
Holy **** that front lip.
You weren't lying when you said it was based off the TEK-80
Told ya. It's basically a brick.
Very interested - though I wouldn't go for PINK.This is an old design, check the first post for updated designs.Told ya. It's basically a brick.
Maybe you can chamfer the front lip by some 5 or 10 degrees (much like the Cherry 3000 cases).
Any chance we can choose plate colors as well?
Just a quick update.
Factory is working on a large order, so I'm waiting a bit to get final quotes on the new design both in GB and prototype. Once I get said quote, I'll likely open up some sort of $30-$50 preorder that reserves your spot (limited in quantity of course).
Also I decided to simplify the side profile a bit.Show Image(http://i.imgur.com/n6VPorc.png)
That's all for now.
Lookin' good. :thumb:It's based off the TGR Jane files, that yuktsi released.
Reminds me a lot of the Jane CE.
Lookin' good. :thumb:It's based off the TGR Jane files, that yuktsi released.
Reminds me a lot of the Jane CE.
I'm hoping to persuade 27 to mix the side profiles from:Show Image(http://i.imgur.com/zopKmmg.png)
andShow Image(http://i.imgur.com/n6VPorc.png)
To have something like:Show Image(http://i.imgur.com/TSfBtZw.png)
Lookin' good. :thumb:It's based off the TGR Jane files, that yuktsi released.
Reminds me a lot of the Jane CE.
I'm hoping to persuade 27 to mix the side profiles from:Show Image(http://i.imgur.com/zopKmmg.png)
andShow Image(http://i.imgur.com/n6VPorc.png)
To have something like:Show Image(http://i.imgur.com/TSfBtZw.png)
True photoshop skills if you ask me
Just a quick update.
Factory is working on a large order, so I'm waiting a bit to get final quotes on the new design both in GB and prototype. Once I get said quote, I'll likely open up some sort of $30-$50 preorder that reserves your spot (limited in quantity of course).
Also I decided to simplify the side profile a bit.Show Image(http://i.imgur.com/n6VPorc.png)
That's all for now.
Just a quick update.
Factory is working on a large order, so I'm waiting a bit to get final quotes on the new design both in GB and prototype. Once I get said quote, I'll likely open up some sort of $30-$50 preorder that reserves your spot (limited in quantity of course).
Also I decided to simplify the side profile a bit.Show Image(http://i.imgur.com/n6VPorc.png)
That's all for now.
Any idea of quantity?
Got a pic from the factory of the V0.01 board, which does not match the design I've been showing off.Show Image(http://i.imgur.com/9LAtrWl.jpg)
Anodization and milling quality looks alright in the picture. I'll take some shots detailing any issues once I receive it. Obviously this won't be telling of the latest design, but it will be telling of quality and ability to colour match.
I'm sorry if this has been asked/answered, but is there any sort of price estimate on this?
I'm sorry if this has been asked/answered, but is there any sort of price estimate on this?
None for the new design yet. I'm slowly working on this, since it probably won't be run until after I moved for school, but I'm hoping to have quotes done this month.
Very happy to hear this. You take the time you need, this will be fantastic.I'm sorry if this has been asked/answered, but is there any sort of price estimate on this?
None for the new design yet. I'm slowly working on this, since it probably won't be run until after I moved for school, but I'm hoping to have quotes done this month.
Looking forward to using my OSAP for this. :))Financially responsible! :thumb:
No one trusts Sprit or GON....
Just go with winkeyless(beastmask) or leeku.
Will the board be WKL layout only?
No one trusts Sprit or GON....
Just go with winkeyless(beastmask) or leeku.
No one trusts Sprit or GON....
Just go with winkeyless(beastmask) or leeku.
GON showed he was cable of a GB for PCBs with Leandren's R4 GB albeit they were 60% PCBs.
No one trusts Sprit or GON....
Just go with winkeyless(beastmask) or leeku.
GON showed he was cable of a GB for PCBs with Leandren's R4 GB albeit they were 60% PCBs.
Leeku has all the features I need, and a pretty good price, so it looks like I'll be using the TX87.
No one trusts Sprit or GON....
Just go with winkeyless(beastmask) or leeku.
GON showed he was cable of a GB for PCBs with Leandren's R4 GB albeit they were 60% PCBs.
Leeku has all the features I need, and a pretty good price, so it looks like I'll be using the TX87.
Will he be doing diodes? My MX TX87 was already done, but the Alps one I got I had to do myself.
If not maybe theyre something you can source for a cheaper price for everyone. Then again there is the whole cylinder vs rectangle debate.
No one trusts Sprit or GON....
Just go with winkeyless(beastmask) or leeku.
GON showed he was cable of a GB for PCBs with Leandren's R4 GB albeit they were 60% PCBs.
Leeku has all the features I need, and a pretty good price, so it looks like I'll be using the TX87.
Will he be doing diodes? My MX TX87 was already done, but the Alps one I got I had to do myself.
If not maybe theyre something you can source for a cheaper price for everyone. Then again there is the whole cylinder vs rectangle debate.
Yupp, diodes, resistors, AND the RGB underlighting will all be presoldered.
No one trusts Sprit or GON....
Just go with winkeyless(beastmask) or leeku.
GON showed he was cable of a GB for PCBs with Leandren's R4 GB albeit they were 60% PCBs.
Leeku has all the features I need, and a pretty good price, so it looks like I'll be using the TX87.
Will he be doing diodes? My MX TX87 was already done, but the Alps one I got I had to do myself.
If not maybe theyre something you can source for a cheaper price for everyone. Then again there is the whole cylinder vs rectangle debate.
Yupp, diodes, resistors, AND the RGB underlighting will all be presoldered.
That's awesome that that will all be predone, but what do you mean by under lighting?
Quick updateHow to make deposit?
I have a price for the GB maximum order quantity, which will be 100 boards. It'll be $300USD (Includes a $10 donation to GH) + PP fees (2.9% + $0.30) + shipping (~$35 CONUS, ~$60 International)
I'm working on the price for the MOQ, which is 50 boards. I don't expect it too cost too much more than the 100.
All boards will come in a stamped cardboard box with all components inside of a plastic bag and encased in custom cut foam. I'll provide a business card with your order details and the number out of 100 that your board is.
I'll be opening up limited deposits (15 people) in order to help finance a new prototype once I receive the price on 50 units. The deposit is a $35 minimum, but you're more than welcome to put down more, since it's helping get the next prototype made. Those who put a deposit down will be able to reserve the number board of their choosing.
The Groupbuy Will Not Open Until Mid-September
I will be moving September 2nd, and will need to figure out shipping to myself in dorms.
Quick updateHow to make deposit?
I have a price for the GB maximum order quantity, which will be 100 boards. It'll be $300USD (Includes a $10 donation to GH) + PP fees (2.9% + $0.30) + shipping (~$35 CONUS, ~$60 International)
I'm working on the price for the MOQ, which is 50 boards. I don't expect it too cost too much more than the 100.
All boards will come in a stamped cardboard box with all components inside of a plastic bag and encased in custom cut foam. I'll provide a business card with your order details and the number out of 100 that your board is.
I'll be opening up limited deposits (15 people) in order to help finance a new prototype once I receive the price on 50 units. The deposit is a $35 minimum, but you're more than welcome to put down more, since it's helping get the next prototype made. Those who put a deposit down will be able to reserve the number board of their choosing.
The Groupbuy Will Not Open Until Mid-September
I will be moving September 2nd, and will need to figure out shipping to myself in dorms.
Is it a true deposit? That is we get the final price - our deposit, or do we pay final price + deposit?
Where is the deposit form? I want to give you some money :thumb:
Could you tell me the estimated time for production and estimated ship date?The actual buy isn't opening until mid-september and shipping to US is 35 dollars.
and how about the domestic shipping costs ?
Where is this badboy being made? Korea or China?
Hey guys, just a quick update.
Prices are:
100 - $280
50 - $300
Unfortunately there will be an additional $20-$30 per order to help cover freight from the factory to me.
I won't be opening the deposit form for a couple of days due to a death in the family early this morning and now I have to help sort that out. I'll update as soon as I know when I'm going to be taking the deposits.
Hey guys, just a quick update.
Prices are:
100 - $280
50 - $300
Unfortunately there will be an additional $20-$30 per order to help cover freight from the factory to me.
I won't be opening the deposit form for a couple of days due to a death in the family early this morning and now I have to help sort that out. I'll update as soon as I know when I'm going to be taking the deposits.
Sorry for your loss, take your time... :(
Will you ever consider Winkey layouts or is this exclusively WKL?
submitted, but dunno if i forgot to add my paypal LOL -- pm me if thats the case!! :confused:
Paid deposit.
Will you tell us what numbers we got?
stuck between choosing this or the mira :-X
stuck between choosing this or the mira :-X
I want to hear a sound file of you living up to your user name
stuck between choosing this or the mira :-X
I want to hear a sound file of you living up to your user name
I yell a lot when I play overwatch, maybe I should record a skype session some day :p
Stuck at work but I'll get to the invoice as soon as I get home from work today (UK time)Woo, two Mech27-TKLs in the UK!
All invoices have been sent out! Make sure to pay them quickly :)Release the numbers!
Thanks for paying quickly guys, I've paid the first 50% of the prototype, and will be paying for the second half when it's ready to ship in about 15 days.Cool! Has the factory talked about production time for 50-100 cases?
Thanks for paying quickly guys, I've paid the first 50% of the prototype, and will be paying for the second half when it's ready to ship in about 15 days.Cool! Has the factory talked about production time for 50-100 cases?
Rent a van?Thanks for paying quickly guys, I've paid the first 50% of the prototype, and will be paying for the second half when it's ready to ship in about 15 days.Cool! Has the factory talked about production time for 50-100 cases?
I believe the rep told me 3-4 weeks, but it may be more due to using a couple of custom colours for anodizing. Also I need to figure out how to receive the 50-100 from the airport since that's as far as their freight will take it. If anyone has experience with receiving large shipments pm me please.
More trying to figure out who I'm going to be talking to in order to get the stuff. I'll talk to my rep about it, since they've most likely had experience with it :)Rent a van?Thanks for paying quickly guys, I've paid the first 50% of the prototype, and will be paying for the second half when it's ready to ship in about 15 days.Cool! Has the factory talked about production time for 50-100 cases?
I believe the rep told me 3-4 weeks, but it may be more due to using a couple of custom colours for anodizing. Also I need to figure out how to receive the 50-100 from the airport since that's as far as their freight will take it. If anyone has experience with receiving large shipments pm me please.
If I missed the deposit window can I still get the board/pay if I'm able at a later date?
You should change the title 27 ;D Deposits aren't open!Oops
oh no, not accepting any more orders?
oh no, not accepting any more orders?
no longer accepting deposits, but there will be an opportunity to buy one when the order form is up at a later date
oh no, not accepting any more orders?
no longer accepting deposits, but there will be an opportunity to buy one when the order form is up at a later date
thanks!
also, I saw someone asked earlier but i didnt see an answer...Is there going to be any engraving on the board? Or just on the brass weight?
oh no, not accepting any more orders?
no longer accepting deposits, but there will be an opportunity to buy one when the order form is up at a later date
thanks!
also, I saw someone asked earlier but i didnt see an answer...Is there going to be any engraving on the board? Or just on the brass weight?
Just on the weight
hey 27, will be out of country until sep 5th. Will the gb start before then? If so.. would you mind putting me down for one? I missed the deposit stage but I am interested and am willing to show my interest :)
Canadian Custom has a nice ring to it. :cool:I like it!
Looking promising, I'm still in two minds about WKL but from the look of the plate it looks like there is split right shift support right? If there is then I've got no issues :thumb:
Looking promising, I'm still in two minds about WKL but from the look of the plate it looks like there is split right shift support right? If there is then I've got no issues :thumb:
There is split shift support. You'd better be on board for this, you put a deposit down! :))
Love the color. Will it be available on GB?
I just noticed one of the holes on the switch plate is enlarged (position near the spacebar stabiliser), is there anything special about this switch position?
I just noticed one of the holes on the switch plate is enlarged (position near the spacebar stabiliser), is there anything special about this switch position?
I just noticed one of the holes on the switch plate is enlarged (position near the spacebar stabiliser), is there anything special about this switch position?LOL that switch is hilarious
That weight... Holy ****.Show Image(http://i.imgur.com/abor1i4.png)Show Image(http://i.imgur.com/fbolIIY.png)Show Image(http://i.imgur.com/Dp6EvEl.png)Show Image(http://i.imgur.com/TGbd1pj.png)Show Image(http://i.imgur.com/456Nhmr.png)
I'm going to get one of the weights polished to compare. I'm moving 650km on Sept 2nd, so I'm going to be holding off on shipping it until I have a shipping address in dorms.
That weight... Holy ****.Show Image(http://i.imgur.com/abor1i4.png)Show Image(http://i.imgur.com/fbolIIY.png)Show Image(http://i.imgur.com/Dp6EvEl.png)Show Image(http://i.imgur.com/TGbd1pj.png)Show Image(http://i.imgur.com/456Nhmr.png)
I'm going to get one of the weights polished to compare. I'm moving 650km on Sept 2nd, so I'm going to be holding off on shipping it until I have a shipping address in dorms.
That weight... Holy ****.Show Image(http://i.imgur.com/abor1i4.png)Show Image(http://i.imgur.com/fbolIIY.png)Show Image(http://i.imgur.com/Dp6EvEl.png)Show Image(http://i.imgur.com/TGbd1pj.png)Show Image(http://i.imgur.com/456Nhmr.png)
I'm going to get one of the weights polished to compare. I'm moving 650km on Sept 2nd, so I'm going to be holding off on shipping it until I have a shipping address in dorms.
That better be a good "Holy ****" ;)
That weight... Holy ****.Show Image(http://i.imgur.com/abor1i4.png)Show Image(http://i.imgur.com/fbolIIY.png)Show Image(http://i.imgur.com/Dp6EvEl.png)Show Image(http://i.imgur.com/TGbd1pj.png)Show Image(http://i.imgur.com/456Nhmr.png)
I'm going to get one of the weights polished to compare. I'm moving 650km on Sept 2nd, so I'm going to be holding off on shipping it until I have a shipping address in dorms.
That better be a good "Holy ****" ;)
"Holy ****" is my reaction looking at your C key.
Greetings !100 boards total. 30 spots already taken. GB is expected to start early to mid-september.
I'm a bit out of topic.
Please tell me exactly how many will be on the boards of group buy?
And when it starts up ?
Greetings !100 boards total. 30 spots already taken. GB is expected to start early to mid-september.
I'm a bit out of topic.
Please tell me exactly how many will be on the boards of group buy?
And when it starts up ?
what postal service you will use? canada postal service? or DHL?
Watching thread so I don't miss out...again.
Watching thread so I don't miss out...again.
I'll be giving 24 hour notice and a countdown this time ;)
Watching thread so I don't miss out...again.
I'll be giving 24 hour notice and a countdown this time ;)
For the actual sale? I missed the deposits too. Was going to get number 10 for Guy LaFleur; can't get much more Canadian than that.
;D :-*Watching thread so I don't miss out...again.
I'll be giving 24 hour notice and a countdown this time ;)
what postal service you will use? canada postal service? or DHL?
It'll be Canada post. I'm going to look into getting a dhl account in the future.
Every package will be sent with tracking if possible. I've never had any problems with them, and it seems like the strike crisis has been avoided :)what postal service you will use? canada postal service? or DHL?
It'll be Canada post. I'm going to look into getting a dhl account in the future.
Can it be tracked down? I really interested but I heard bad rumors about canada post :'(
Every package will be sent with tracking if possible. I've never had any problems with them, and it seems like the strike crisis has been avoided :)what postal service you will use? canada postal service? or DHL?
It'll be Canada post. I'm going to look into getting a dhl account in the future.
Can it be tracked down? I really interested but I heard bad rumors about canada post :'(
Aluminum TKL with a diffuser? Yeah count me in. Only complaint is the lack of a winkey option, any chance of this happening?Maybe r2, definitely not this round.
Will the RGB Led on the board comes pre-soldered? Anyone knows a reliable keyboard service in Bay Area?
Sent from my iPhone using Tapatalk
can it ship directly from china?
What are everyone's thoughts on having delivery in December? The lack of storage and transportation here in Ottawa may be a huge limitation, but if I send everything to my parents I could have it all shipped out in mid December when I return after the semester. This is just an idea, and I definitely want to know what you think. If I did this I'd be able to complete the groupbuy much more reliably, but obviously there would be a longer wait time.I kinda assumed it'd be around December anyway. The only bad thing about December is it's near Christmas, so there will be a loooot of mail. (Not sure if that's really an issue)
What are everyone's thoughts on having delivery in December? The lack of storage and transportation here in Ottawa may be a huge limitation, but if I send everything to my parents I could have it all shipped out in mid December when I return after the semester. This is just an idea, and I definitely want to know what you think. If I did this I'd be able to complete the groupbuy much more reliably, but obviously there would be a longer wait time.
I'm fine with wating but I worry about shipping it just before Chrismes.
Beep
Beep
I'm fairly convinced that is the best video I have ever watched. Vertical and all.