Author Topic: [GB]LUSTRO Aluminum + Acrylic Custom 60% Case [Packing] (Read 203200 times)

foggyflute · « **Reply #400 on:** Fri, 17 June 2016, 12:00:39 »

We can include it in shipping invoice.
North America can be covered by Zeal.

Gengarfan · « **Reply #401 on:** Fri, 17 June 2016, 12:36:06 »

Quote from: foggyflute on Fri, 17 June 2016, 12:00:39

We can include it in shipping invoice.
North America can be covered by Zeal.

I would also like to have stabs included in my shipping invoice if possible

mattycee · « **Reply #402 on:** Fri, 17 June 2016, 16:47:32 »

we should post the order status on the first page so we dont have to keep running around to look for it

Jeu · « **Reply #403 on:** Fri, 17 June 2016, 18:11:32 »

Couldn't find this anywhere. What is the length and height of the case? Top down dimensions I guess. Looking into wrist rests

Sent from my iPhone using Tapatalk

Ngt · « **Reply #404 on:** Sun, 19 June 2016, 05:30:15 »

Quote from: foggyflute on Fri, 17 June 2016, 12:00:39

We can include it in shipping invoice.
North America can be covered by Zeal.

That's nice of you! Will you have enough stock for that? I don't remember reading what type of stabs is it. Are they Cherry stabs? I looked on Winkeyless.kr and he's selling only PCB mount stabs. Can we use them on plate mount? Or are you sourcing somewhere else for the stabs?

foggyflute · « **Reply #405 on:** Sun, 19 June 2016, 07:48:09 »

Quote from: Ngt on Sun, 19 June 2016, 05:30:15

Quote from: foggyflute on Fri, 17 June 2016, 12:00:39
We can include it in shipping invoice.
North America can be covered by Zeal.

That's nice of you! Will you have enough stock for that? I don't remember reading what type of stabs is it. Are they Cherry stabs? I looked on Winkeyless.kr and he's selling only PCB mount stabs. Can we use them on plate mount? Or are you sourcing somewhere else for the stabs?

We buying everyone cherry pcb mount stab also charge lower price than you buy them from wkl.kr since we buy them in bulk, our plate currently support only pcbmount, and i dont remember any 60% pcb doesnt include mount hole for those.

Personally I dislike the plate mount, but if anyone need those, we have them and plate that support them as well, as a company we aim to serve everyone taste

Ngt · « **Reply #406 on:** Sun, 19 June 2016, 08:30:45 »

Quote from: foggyflute on Sun, 19 June 2016, 07:48:09

Quote from: Ngt on Sun, 19 June 2016, 05:30:15
Quote from: foggyflute on Fri, 17 June 2016, 12:00:39
We can include it in shipping invoice.
North America can be covered by Zeal.

That's nice of you! Will you have enough stock for that? I don't remember reading what type of stabs is it. Are they Cherry stabs? I looked on Winkeyless.kr and he's selling only PCB mount stabs. Can we use them on plate mount? Or are you sourcing somewhere else for the stabs?

We buying everyone cherry pcb mount stab also charge lower price than you buy them from wkl.kr since we buy them in bulk, our plate currently support only pcbmount, and i dont remember any 60% pcb doesnt include mount hole for those.

Personally I dislike the plate mount, but if anyone need those, we have them and plate that support them as well, as a company we aim to serve everyone taste

Oh ok, my bad. I thought you could only use PCB mount stabs when you don't use plate at all. I cannot say which are best as I've never used PCB mount stabs. This would be my first self built keyboard.

fancymans · « **Reply #407 on:** Sun, 19 June 2016, 20:11:15 »

Quote from: foggyflute on Sun, 19 June 2016, 07:48:09

Quote from: Ngt on Sun, 19 June 2016, 05:30:15
Quote from: foggyflute on Fri, 17 June 2016, 12:00:39
We can include it in shipping invoice.
North America can be covered by Zeal.

That's nice of you! Will you have enough stock for that? I don't remember reading what type of stabs is it. Are they Cherry stabs? I looked on Winkeyless.kr and he's selling only PCB mount stabs. Can we use them on plate mount? Or are you sourcing somewhere else for the stabs?

We buying everyone cherry pcb mount stab also charge lower price than you buy them from wkl.kr since we buy them in bulk, our plate currently support only pcbmount, and i dont remember any 60% pcb doesnt include mount hole for those.

Personally I dislike the plate mount, but if anyone need those, we have them and plate that support them as well, as a company we aim to serve everyone taste

What's the difference between PCB mount and plate mount stabilizers? Do they feel different, or is it just a preference on how you build a board?

foggyflute · « **Reply #408 on:** Sun, 19 June 2016, 21:29:11 »

Quote from: fancymans on Sun, 19 June 2016, 20:11:15

What's the difference between PCB mount and plate mount stabilizers? Do they feel different, or is it just a preference on how you build a board?

Just my experience that the plate mount stabs are louder, on metal plate of course (Corsair), never touch them since then except Alps builds.

fancymans · « **Reply #409 on:** Mon, 20 June 2016, 00:19:39 »

Quote from: foggyflute on Sun, 19 June 2016, 21:29:11

Quote from: fancymans on Sun, 19 June 2016, 20:11:15
What's the difference between PCB mount and plate mount stabilizers? Do they feel different, or is it just a preference on how you build a board?

Just my experience that the plate mount stabs are louder, on metal plate of course (Corsair), never touch them since then except Alps builds.

Ah that makes sense. Thanks.

JDragon · « **Reply #410 on:** Mon, 20 June 2016, 01:38:10 »

Forgot to ask this earlier, but for pre-assembled boards, can we request split right shift?

bazh · « **Reply #411 on:** Mon, 20 June 2016, 03:49:48 »

Quote from: JDragon on Mon, 20 June 2016, 01:38:10

Forgot to ask this earlier, but for pre-assembled boards, can we request split right shift?

I will ask you guys (who buys the full assembled kit) to send me your desire layout config later

(of course still limited to what the PCB support)

JDragon · « **Reply #412 on:** Mon, 20 June 2016, 12:09:01 »

Quote from: bazh on Mon, 20 June 2016, 03:49:48

Quote from: JDragon on Mon, 20 June 2016, 01:38:10
Forgot to ask this earlier, but for pre-assembled boards, can we request split right shift?

I will ask you guys (who buys the full assembled kit) to send me your desire layout config later (of course still limited to what the PCB support)

Thanks!

Does the PCB/case support HHKB layout by any chance?

bazh · « **Reply #413 on:** Wed, 22 June 2016, 01:39:46 »

Quote from: JDragon on Mon, 20 June 2016, 12:09:01

Quote from: bazh on Mon, 20 June 2016, 03:49:48
Quote from: JDragon on Mon, 20 June 2016, 01:38:10
Forgot to ask this earlier, but for pre-assembled boards, can we request split right shift?

I will ask you guys (who buys the full assembled kit) to send me your desire layout config later (of course still limited to what the PCB support)

Thanks!

Does the PCB/case support HHKB layout by any chance?

The only option for HHKB layout now is just a specific cut place (no holes at Controls position)

//we still have like 10 unpaid invoices, I'll update the list in the OP

bazh · « **Reply #414 on:** Wed, 22 June 2016, 01:57:31 »

Order status updated at post 1

JDragon · « **Reply #415 on:** Wed, 22 June 2016, 10:31:54 »

Hrm, my payment was sent 6/9. Sent you a PM with the PayPal transaction ID.

bazh · « **Reply #416 on:** Thu, 23 June 2016, 01:49:15 »

Quote from: JDragon on Wed, 22 June 2016, 10:31:54

Hrm, my payment was sent 6/9. Sent you a PM with the PayPal transaction ID.

I'll update the list in minutes

sorry for any inconvenient this cause

Jeu · « **Reply #417 on:** Thu, 23 June 2016, 07:29:07 »

Quote from: Jeu on Fri, 17 June 2016, 18:11:32

Couldn't find this anywhere. What is the length and height of the case? Top down dimensions I guess. Looking into wrist rests

Sent from my iPhone using Tapatalk

Bazh or foggy or anyone else got these measurements?

Sent from my iPhone using Tapatalk

Gengarfan · « **Reply #418 on:** Mon, 27 June 2016, 16:52:04 »

How are things going?

graefeln · « **Reply #419 on:** Mon, 27 June 2016, 17:11:52 »

Quote from: Gengarfan on Mon, 27 June 2016, 16:52:04

How are things going?

I was wondering myself, but didn't want to seem impatient. Hoping to see pictures showing off the purple and gun metal colors...

foggyflute · « **Reply #420 on:** Tue, 28 June 2016, 03:59:20 »

Quote from: Jeu on Thu, 23 June 2016, 07:29:07

Quote from: Jeu on Fri, 17 June 2016, 18:11:32
Couldn't find this anywhere. What is the length and height of the case? Top down dimensions I guess. Looking into wrist rests

Sent from my iPhone using Tapatalk
Bazh or foggy or anyone else got these measurements?

Sent from my iPhone using Tapatalk

Sorry, I will give you the exact measurement when I get home, the heigh is around 25mm from surface to keycap bottom but you probably not need the palm rest as thick as that, width is arround 300-305mm. Thick and soft palm rest is recommended, really good for me so far.

Quote from: Gengarfan on Mon, 27 June 2016, 16:52:04

How are things going?

Pretty much waiting for machinary process, nothing but machine cutting and milling aluminium, I will take some picture but inside the VMC machine is dark anyway so pictures will not came out pretty.

Quote from: graefeln on Mon, 27 June 2016, 17:11:52

I was wondering myself, but didn't want to seem impatient. Hoping to see pictures showing off the purple and gun metal colors...

We will have test color on real final product very soon

murkey · « **Reply #421 on:** Tue, 28 June 2016, 09:14:56 »

I've been travelling and just caught up on this thread... for fully assembled do I need to buy PCB mount stabs? Slightly confused

bazh · « **Reply #422 on:** Tue, 28 June 2016, 09:18:19 »

Quote from: murkey on Tue, 28 June 2016, 09:14:56

I've been travelling and just caught up on this thread... for fully assembled do I need to buy PCB mount stabs? Slightly confused

If you purchased the fully assembled kit you already got stab (PCB mount) included in your order, I also included this details in the invoices sent through Paypal for transparency

murkey · « **Reply #423 on:** Tue, 28 June 2016, 09:26:27 »

Quote from: bazh on Tue, 28 June 2016, 09:18:19

Quote from: murkey on Tue, 28 June 2016, 09:14:56
I've been travelling and just caught up on this thread... for fully assembled do I need to buy PCB mount stabs? Slightly confused
If you purchased the fully assembled kit you already got stab (PCB mount) included in your order, I also included this details in the invoices sent through Paypal for transparency

Thanks for clarifying, I see that now! Very excited for this!!!

foggyflute · « **Reply #424 on:** Thu, 30 June 2016, 06:56:29 »

People asked me about update, but we got nothing but machine still running... so here's some photos of them.

Lustro stands, one pair at a time:

Weaven side bar, the track for cf plate need a small milling bit running slow with multi passes over to get to desired deep.

Partial-finished parts, Lustro in blue baskets and Weaven in green baskets:

We're on schedule right now

Ngt · « **Reply #425 on:** Thu, 30 June 2016, 08:31:03 »

Quote from: foggyflute on Thu, 30 June 2016, 06:56:29

People asked me about update, but we got nothing but machine still running... so here's some photos of them.

Lustro stands, one pair at a time:
Show Image

Weaven side bar, the track for cf plate need a small milling bit running slow with multi passes over to get to desired deep.
Show Image

Partial-finished parts, Lustro in blue baskets and Weaven in green baskets:
Show Image
Show Image
Show Image
Show Image

We're on schedule right now

Really cool pictures!

mattycee · « **Reply #426 on:** Thu, 30 June 2016, 13:37:22 »

Probably one of the best update I have seen keep these coming

Nothing better than seeing the whole process!

UsualSuspectXXX · « **Reply #427 on:** Thu, 30 June 2016, 17:47:13 »

I love seeing manufacturing machinery. I used to work at a company that had a large plant floor and sometimes I would just go down there and watch the big machines. Pretty awesome stuff.

Thanks for the update

Sifo · « **Reply #428 on:** Fri, 01 July 2016, 19:55:28 »

nice machining

bazh · « **Reply #429 on:** Fri, 08 July 2016, 01:18:46 »

Got something for you guys

Sifo · « **Reply #430 on:** Fri, 08 July 2016, 01:19:40 »

oh baaaaby

eyedrop · « **Reply #431 on:** Fri, 08 July 2016, 02:17:38 »

Awesome, swimming in the sea of zealios.

Gengarfan · « **Reply #432 on:** Fri, 08 July 2016, 02:48:44 »

What an awesome picture! Are we getting close now?

Ngt · « **Reply #433 on:** Fri, 08 July 2016, 03:35:32 »

Hehe cool picture! I hope i'll find someone to buy my pristine winkeyless PCB so I buy a TMK compatible one.

fancymans · « **Reply #434 on:** Fri, 08 July 2016, 04:27:03 »

Oooh pretty. Thanks for the pics!

Gengarfan · « **Reply #435 on:** Fri, 08 July 2016, 11:03:05 »

Quote from: Ngt on Fri, 08 July 2016, 03:35:32

Hehe cool picture! I hope i'll find someone to buy my pristine winkeyless PCB so I buy a TMK compatible one.

Pm me!

Ngt · « **Reply #436 on:** Fri, 08 July 2016, 11:19:57 »

Quote from: Gengarfan on Fri, 08 July 2016, 11:03:05

Quote from: Ngt on Fri, 08 July 2016, 03:35:32
Hehe cool picture! I hope i'll find someone to buy my pristine winkeyless PCB so I buy a TMK compatible one.

Pm me!

PM'd

bazh · « **Reply #437 on:** Sat, 09 July 2016, 06:22:33 »

Quote from: Gengarfan on Fri, 08 July 2016, 02:48:44

What an awesome picture! Are we getting close now?

You can say so, we're pretty much wrapping up the CNC process, as of today all the LUSTRO stands are done, Weaven is 80% and we only have LUSTRO acrylic base left, but that can be done in the time we move on to sandblasting and anodizing aluminum parts.

stillzman · « **Reply #438 on:** Sat, 09 July 2016, 11:59:02 »

I really hate myself for missing out on this

GiveCandyy · « **Reply #439 on:** Sat, 09 July 2016, 12:09:11 »

Quote from: stillzman on Sat, 09 July 2016, 11:59:02

I really hate myself for missing out on this

It's alright. This came out at the same time as weaven and that acrylic case.

Gengarfan · « **Reply #440 on:** Sat, 09 July 2016, 14:07:22 »

Quote from: bazh on Sat, 09 July 2016, 06:22:33

Quote from: Gengarfan on Fri, 08 July 2016, 02:48:44
What an awesome picture! Are we getting close now?

You can say so, we're pretty much wrapping up the CNC process, as of today all the LUSTRO stands are done, Weaven is 80% and we only have LUSTRO acrylic base left, but that can be done in the time we move on to sandblasting and anodizing aluminum parts.

Are there any extra pcbs/stabs that I could purchase? I bought another case and would love to get these parts

bazh · « **Reply #441 on:** Sun, 10 July 2016, 01:36:45 »

Minor update:

Due to some people backing out of the GB, we have some spot available now in case anyone missed the GB still want the case, now is the time to shoot me a PM and I can sneak you in to the list

Everyone who order the case fully assembled please send me your desired layout, best is to use www.keyboard-layout-editor.com and extract the JPG and send it to

Also specify the switches position for keys such as capslock (centered/off-centered) and spacebars (middle/Cherry's old righty position)

bazh · « **Reply #442 on:** Sun, 10 July 2016, 01:37:45 »

Quote from: Gengarfan on Sat, 09 July 2016, 14:07:22

Quote from: bazh on Sat, 09 July 2016, 06:22:33
Quote from: Gengarfan on Fri, 08 July 2016, 02:48:44
What an awesome picture! Are we getting close now?

You can say so, we're pretty much wrapping up the CNC process, as of today all the LUSTRO stands are done, Weaven is 80% and we only have LUSTRO acrylic base left, but that can be done in the time we move on to sandblasting and anodizing aluminum parts.

Are there any extra pcbs/stabs that I could purchase? I bought another case and would love to get these parts

Extra PCB and stabs available! Please PM me what you want!

fancymans · « **Reply #443 on:** Sun, 10 July 2016, 03:15:17 »

Sent you a PM for my layout. If anything is unclear PM me to confirm!

sprit · « **Reply #444 on:** Sun, 10 July 2016, 03:21:06 »

Beautiful Board! Bazh!

foggyflute · « **Reply #445 on:** Mon, 11 July 2016, 08:07:57 »

The total weight

Some picture on b.face lighting, zelios, and warm white led...

Sifo · « **Reply #446 on:** Mon, 11 July 2016, 08:11:06 »

fuuuuuuuuuuck that's nice

UsualSuspectXXX · « **Reply #447 on:** Mon, 11 July 2016, 08:15:39 »

Ughhh AMAZING!

Will we be getting clear stabilizers like that??

foggyflute · « **Reply #448 on:** Mon, 11 July 2016, 08:27:21 »

Quote from: UsualSuspectXXX on Mon, 11 July 2016, 08:15:39

Ughhh AMAZING!

Will we be getting clear stabilizers like that??

For everyone with zelios and gateron (clear-top), aesthetically pleasing so no reason for not to (tested for sound, fitting and it's okay though).
It's unlucky for us that Zeal's clear stabs are not available yet, I believe Zeal's gonna be superior to these, but this will do for now.

fancymans · « **Reply #449 on:** Mon, 11 July 2016, 09:50:23 »

That. Looks. Amazing. The bottom lighting is RGB? I thought only single color was available. Is it too late to request mine to also have RGB underglow?

News:

Author Topic: [GB]LUSTRO Aluminum + Acrylic Custom 60% Case [Packing] (Read 203200 times)