Post by: PlayKeyboardTW on Thu, 16 August 2018, 10:08:59
Default PCB building & flashing guide: http://bit.ly/31ATS6v (http://bit.ly/31ATS6v)
Bluetooth PCB building & flashing guide: http://bit.ly/2X2cJsp (http://bit.ly/2X2cJsp)
2019.6.8
Please contact us via Facebook fanpage message, mail, or PM if you need after sale service.
2019.6.1
Extra parts will be in stock on our store after all GB orders are sent, as we said it before.
We need to make sure everyone participating in this GB receive their items correctly first.
If you are looking for any spare parts for replacement, please follow our Instagram account and Facebook page to get the first info.
Hello community! Round 2 is up! ;D
IC link: https://geekhack.org/index.php?topic=96401.0 (https://geekhack.org/index.php?topic=96401.0)
[attach=1][attach=2][attach=3][attach=4]
[attach=5][attach=6][attach=7][attach=8]
Design Concept:
Inspired by an old IBM keyboard, "PCjr".
The name CA66 came from French, "66 avec de la corniche". A 66 keys keyboard with cornice.
Product Contents:
- Case
- Aluminum switch plate (all plates are modified a bit for wireless signal to pass through)
- Default PCB or Bluetooth PCB
- Brass badge (not included in a WKL-like version)
- Screws, rubber feet
- Boxing
- Default PCB
- Bluetooth PCB
- Brass plate
- Titanium badge
- Aluminum Alps plate (for BT PCB)
- 6063 aluminum
- 2 versions - HHKB-like & WKL-like
- Switch plate - aluminum & brass (optional)
- Default case colors - black, silver, dark grey
Special colors: white, grey blue, dark red, purple, army green (some are not shown in the product page. We'll update them as soon as possible) - Alu switch plate colors - red, blue, gold, silver
- Brass switch plate (optional, only for extra purchasing)
Plate pic. The upper one is for Alps, the other one is for both alu and brass.
All are compatible with BT PCB.
[attach=9]
- Black, gold pads
- South facing led orientation
- USB C interface
- TMK, QMK firmware supporting
- RGB led side bar
- Wire/wireless, charging when cable is plugged
- TMK firmware
- A bluetooth switch between Tab and Q
- Battery charging indicator
- Estimated 3 month duration with a 3000 mAh battery
- Battery not included
- alps switches supporting
- Basic kit: 275USD/pc for default case colors (including case, alu plate, PCB and brass badge if you choose HHKB like layout)
- Special colors: +16USD
- Upgrade to Bluetooth PCB: +25USD
- Extra default PCB: 27USD
- Extra BT PCB: 50USD
- Extra alu plate: 22USD
- Extra brass plate: 28.5USD (sorry for raising, it was too cheap for last round :-[ )
- Extra alu alps plate: 24USD
- Extra Titanium badge: 26USD
- Shipping fee: 45USD for all locations, DHL Express
- Transaction fee (sorry for raising a little bit higher for remaining the price to be the same as last round)
- Both fees are already calculated and included in all prices
Timeline:
- GB period: Aug 17th to Sep 5th
- Estimated shipping date: Dec 10th
- No quantity limit
- Get full kit here: https://play-keyboard.store/collections/group-buys/products/ca66-66-custom-keyboard-kit (https://play-keyboard.store/collections/group-buys/products/ca66-66-custom-keyboard-kit)
- Get extra parts here (available for purchasing individually): https://play-keyboard.store/collections/group-buys/products/ca66-extra-parts (https://play-keyboard.store/collections/group-buys/products/ca66-extra-parts)
(please choose DHL Express for shipping if you are purchasing extra parts individually)
Post by: Signature on Thu, 16 August 2018, 12:01:08
Post by: vonswoopington on Thu, 16 August 2018, 12:39:07
Post by: cijanzen on Thu, 16 August 2018, 13:21:35
Post by: Lormania on Thu, 16 August 2018, 14:42:28
Post by: jrfhoutx on Thu, 16 August 2018, 16:53:08
Perhaps add clarification that at least at this time the BT PCB only supports TMK?
I never really heard any clarification on this, but if it supports TMK, why can it not support QMK? is it just that the port hasn't been done, or is it that the port isn't possible?
Post by: Lyle88 on Thu, 16 August 2018, 17:51:39
Sent from my Pixel XL using Tapatalk
Post by: KoalaKaiser on Thu, 16 August 2018, 18:17:30
I'm confused why the group buy says $275usd per kit but on the website it shows $340?
Sent from my Pixel XL using Tapatalk
The transaction and sales fee are included within the price on the website.
Post by: gregoryturtle on Thu, 16 August 2018, 18:19:15
Does anyone know what sort of battery the BT version uses? Would love an example/link to one, just so I don't get the wrong one and blow my keyboard up 😅
Post by: gregoryturtle on Thu, 16 August 2018, 18:20:14
I'm confused why the group buy says $275usd per kit but on the website it shows $340?
Sent from my Pixel XL using Tapatalk
The transaction and sales fee are included within the price on the website.
It includes shipping which is a flat rate + transaction PayPal fees
Post by: KoalaKaiser on Thu, 16 August 2018, 18:23:38
I'm confused why the group buy says $275usd per kit but on the website it shows $340?
It includes shipping which is a flat rate + transaction PayPal fees
Sent from my Pixel XL using Tapatalk
The transaction and sales fee are included within the price on the website.
Doh. Sorry I've been on overnight shifts, lack of sleep and all of that good stuff. Thanks! ;)
Post by: Ephemeral on Thu, 16 August 2018, 18:27:56
Finally! BTW it shows as sold out but I'm going to assume it's still being set up.
GB start is listed as Aug 17th. Probably won’t be able to order until tomorrow.
Post by: jrfhoutx on Thu, 16 August 2018, 18:47:22
:D ;D ;D ;D
Does anyone know what sort of battery the BT version uses? Would love an example/link to one, just so I don't get the wrong one and blow my keyboard up 😅
If you look in the pics of the first post of the IC (linked in the first post here) there’s a picture of a BT PCB with a battery with specs. The one shown in the pic is a single cell LiPo @3.7V 3000mAh. So I would imagine you could really use anything that’s 3.7V and fits in the case.
Post by: codyeatworld on Thu, 16 August 2018, 19:05:46
Post by: PlayKeyboardTW on Thu, 16 August 2018, 19:30:13
Perhaps add clarification that at least at this time the BT PCB only supports TMK?
I never really heard any clarification on this, but if it supports TMK, why can it not support QMK? is it just that the port hasn't been done, or is it that the port isn't possible?
BT PCB supports TMK only at the moment. Maybe someone might able to get it goes with QMK.
:D ;D ;D ;D
Does anyone know what sort of battery the BT version uses? Would love an example/link to one, just so I don't get the wrong one and blow my keyboard up 😅
A 3.7g lithium battery will do. You can decide the size you want to put in since there's much space inside. :thumb:
Post by: cijanzen on Thu, 16 August 2018, 19:30:22
Perhaps add clarification that at least at this time the BT PCB only supports TMK?
I never really heard any clarification on this, but if it supports TMK, why can it not support QMK? is it just that the port hasn't been done, or is it that the port isn't possible?
It hasn’t been ported but I’m also not sure if it is a possibility or not.
Post by: PlayKeyboardTW on Thu, 16 August 2018, 19:37:39
White is coloring by electrophoresis, with matte finish.
[attach=1][attach=2]
And army green was just done yesterday (the upper one). But it still needs a tweak for matching the color we want, in a army green Doppio render.
[attach=3][attach=4]
We'll probably put the white in to GB page for clarifying the color. It's pretty much set up.
Green is going to be up until it has a conclusion. :thumb:
Post by: cijanzen on Thu, 16 August 2018, 19:39:21
Post by: Lyle88 on Thu, 16 August 2018, 21:25:42
Awesome, thanks for clarifying!I'm confused why the group buy says $275usd per kit but on the website it shows $340?
Sent from my Pixel XL using Tapatalk
The transaction and sales fee are included within the price on the website.
It includes shipping which is a flat rate + transaction PayPal fees
Sent from my Pixel XL using Tapatalk
Post by: roymt76 on Thu, 16 August 2018, 21:50:14
Post by: jrfhoutx on Thu, 16 August 2018, 21:53:11
Perhaps add clarification that at least at this time the BT PCB only supports TMK?
I never really heard any clarification on this, but if it supports TMK, why can it not support QMK? is it just that the port hasn't been done, or is it that the port isn't possible?
BT PCB supports TMK only at the moment. Maybe someone might able to get it goes with QMK.
Have a link to the CAD66 TMK source?
Post by: cijanzen on Thu, 16 August 2018, 22:01:09
Perhaps add clarification that at least at this time the BT PCB only supports TMK?
I never really heard any clarification on this, but if it supports TMK, why can it not support QMK? is it just that the port hasn't been done, or is it that the port isn't possible?
BT PCB supports TMK only at the moment. Maybe someone might able to get it goes with QMK.
Have a link to the CAD66 TMK source?
I don’t know where the source is but I know the firmware file can be created at ydkb.io
Post by: alisonica on Thu, 16 August 2018, 22:27:56
Post by: StrangPrisoner on Thu, 16 August 2018, 22:41:03
Post by: obertau on Thu, 16 August 2018, 23:04:27
Also is it possible to show the white case colour next to the silver case colour? And could you show both with default 9009 type keycap set to get a sense of whiteness?
Thanks!!
Post by: jrfhoutx on Thu, 16 August 2018, 23:28:03
Perhaps add clarification that at least at this time the BT PCB only supports TMK?
I never really heard any clarification on this, but if it supports TMK, why can it not support QMK? is it just that the port hasn't been done, or is it that the port isn't possible?
hex file won't do much good in porting to qmk. need the source files for that.
BT PCB supports TMK only at the moment. Maybe someone might able to get it goes with QMK.
Have a link to the CAD66 TMK source?
I don’t know where the source is but I know the firmware file can be created at ydkb.io
Post by: PlayKeyboardTW on Fri, 17 August 2018, 00:12:49
Perhaps add clarification that at least at this time the BT PCB only supports TMK?
I never really heard any clarification on this, but if it supports TMK, why can it not support QMK? is it just that the port hasn't been done, or is it that the port isn't possible?
BT PCB supports TMK only at the moment. Maybe someone might able to get it goes with QMK.
Have a link to the CAD66 TMK source?
I don’t know where the source is but I know the firmware file can be created at ydkb.io
Hex file can be generated via ydkb.io (http://ydkb.io).
Code is not open sourced.
Is it possible to get PVD Brass Alps plate? or red. :)
No sorry. That will be too many options. :-X
Will the silver this time once again be the very matte silver?
Also is it possible to show the white case colour next to the silver case colour? And could you show both with default 9009 type keycap set to get a sense of whiteness?
Thanks!!
Silver is the same as previous round. I don't have both silver and white cases in my hand so sorry for not able to take some shots of them.
Hope photos in GB page is clear enough to help you compare and make a choice. :thumb:
so there'll be no gold rose color like R1 ?
No sorry. We canceled brown and rose gold. :'(
Post by: cijanzen on Fri, 17 August 2018, 00:32:23
This may be noted somewhere but I would like to confirm; is the brass plate is compatible with the BT PCB?
This is a good question. I’d also like to get confirmation on this too as it’s a little unclear whether the brass plate will have the new cutouts for BT.
Post by: PlayKeyboardTW on Fri, 17 August 2018, 00:44:49
All these are compatible with BT PCB.
[attach=1]
Post by: Photoelectric on Fri, 17 August 2018, 00:55:48
Post by: cijanzen on Fri, 17 August 2018, 01:02:57
Plate pic. The upper one is for Alps, the other one is for both alu and brass.
All these are compatible with BT PCB.
(Attachment Link)
Awesome! Thank you for clarifying BT support across all plates.
Post by: sheldon on Fri, 17 August 2018, 02:31:20
Plate pic. The upper one is for Alps, the other one is for both alu and brass.
All these are compatible with BT PCB.
(Attachment Link)
oh dang, it looks like split backspace is not available for alps plate?
Post by: cijanzen on Fri, 17 August 2018, 03:21:08
Post by: Shell058 on Fri, 17 August 2018, 04:11:16
Post by: PlayKeyboardTW on Fri, 17 August 2018, 04:17:07
Do you have a specific battery that you recommend? Is there a certain connection type required for the PCB?
No. You can measure it after receiving the keeb. Too much room for a battery. :p
I just want to be 100% sure before I order: the PCB/BT PCB/plates are all compatible with R1 case, correct?
We recommend you to get a new version plate for BT PCB. Others are compatible with R1. :thumb:
Post by: PlayKeyboardTW on Fri, 17 August 2018, 04:19:02
We raised the price for brass plate a bit, since we set it too low for last round. :'(
Extra parts were all updated. You guys can have a look first.
We'll make both pages available to be put into carts later! :thumb:
Post by: PlayKeyboardTW on Fri, 17 August 2018, 05:08:02
Post by: roymt76 on Fri, 17 August 2018, 05:20:55
Post by: PlayKeyboardTW on Fri, 17 August 2018, 05:30:16
why there is no different between normal and special color price ???
Thanks for noticing. We were just editing them at the same time. :eek:
Post by: LVNDSCAPE on Fri, 17 August 2018, 05:50:55
edit: i didnt see it got cancelled.
Post by: roymt76 on Fri, 17 August 2018, 06:00:16
no rose gold this time?I'm sad. i like rose gold
edit: i didnt see it got cancelled.
it will fit with my SA Bubble :(
Post by: PlayKeyboardTW on Fri, 17 August 2018, 08:15:11
no rose gold this time?I'm sad. i like rose gold
edit: i didnt see it got cancelled.
it will fit with my SA Bubble :(
I believe grey blue will work fine with it as well. :p
Post by: nulltorious on Fri, 17 August 2018, 09:20:49
Post by: vonswoopington on Fri, 17 August 2018, 09:24:08
Post by: cijanzen on Fri, 17 August 2018, 09:29:39
Post by: redjarojam on Fri, 17 August 2018, 09:54:13
Post by: Ephemeral on Fri, 17 August 2018, 10:00:56
This is tough. If you are getting white, which keycaps are you going to use? I'm thinking of using Metaverse.
Metaverse would work pretty well. In my opinion anything with white alphas and non-white mods would look good.
Post by: Tordp on Fri, 17 August 2018, 10:10:55
In for Dark Red, Brass Plate, BT PCB. Now just to light a fire under Input Club to start SA Royalty GB for matching keyset!
I'm going to go with Dark Red and GMK Red Samurai. Brass plate for bling and feeling. Not sure about BT yet think I'll go wired.
Post by: cijanzen on Fri, 17 August 2018, 10:27:37
In for Dark Red, Brass Plate, BT PCB. Now just to light a fire under Input Club to start SA Royalty GB for matching keyset!
I'm going to go with Dark Red and GMK Red Samurai. Brass plate for bling and feeling. Not sure about BT yet think I'll go wired.
That’ll look nice! I actually got both PCBs just as backup so I’ll decide once they arrive or maybe I’ll just build up two options.
Post by: Darknight00z on Fri, 17 August 2018, 11:40:37
[/quote]
Just confirming, we will need to take of keycaps each time we turn on/off bluetooth?
Post by: vonswoopington on Fri, 17 August 2018, 12:45:56
This is tough. If you are getting white, which keycaps are you going to use? I'm thinking of using Metaverse.
Metaverse would work pretty well. In my opinion anything with white alphas and non-white mods would look good.
True good point. Now I wish I went in for Serika.
Post by: befbef on Fri, 17 August 2018, 13:41:17
Post by: Mr_BeastQuake on Fri, 17 August 2018, 14:07:06
Post by: cijanzen on Fri, 17 August 2018, 15:34:10
[attachimg=1]
Post by: dondongler on Fri, 17 August 2018, 15:46:14
Post by: kf1246 on Fri, 17 August 2018, 16:21:50
Post by: aslanxdeft on Fri, 17 August 2018, 17:12:44
Post by: PlayKeyboardTW on Fri, 17 August 2018, 18:27:03
A bluetooth switch between Tab and Q
Just confirming, we will need to take of keycaps each time we turn on/off bluetooth?
[/quote]
You can use a toothpick to switch it. :))
Or you might consider not to switch it off, it's very very efficient (without lightning).
This is tough. If you are getting white, which keycaps are you going to use? I'm thinking of using Metaverse.
Metaverse would work pretty well. In my opinion anything with white alphas and non-white mods would look good.
True good point. Now I wish I went in for Serika.
I think space cadet would look great on white. Guess I'll try that or Maxkey Ashen on white or grey... or black...or silver.
We'd love to see some new combination here as well. :eek:
Always looking so good. if there was a board to get me to buy MX. . . it has me thinking.
Still a long time to consider. ;D
Post by: PlayKeyboardTW on Fri, 17 August 2018, 18:32:28
Just ordered this telephone cord I'm going to modify for use with the dark red CA66!
(Attachment Link)
Wow all red huh! :eek:
What color is going to match my taro set the best? I was thinking gray blue may look gud but im not sure.
Dark grey or black imo.
What stabs are intended to be used on the ALPS plate? ALPS style? If so, one should be able to use Matias or Costar stab inserts to put SP ALPS caps on this board, right?
Yes! They are pretty like how KBP keyboards do.
Is there any difference between the BT PCB and the normal one, other than the BT functionality? Also what kind of stabilizer and switches (PCB or platemount) do I need?
Alps switches supporting is only in BT PCB. If you are planning to use Mx switches then no bother.
Both PCB and platemount switches work. PCB stabilizers are needed. :thumb:
Post by: farfar on Fri, 17 August 2018, 19:03:33
Hopefully I can get one on MM sometime later, because the CA66 is a beauty!
GL with the GB though! :D
Post by: upintheclouds on Fri, 17 August 2018, 20:52:38
What color is going to match my taro set the best? I was thinking gray blue may look gud but im not sure.
Dark grey or black imo.
You both think the purple is too much? It matches the Taro mods so well.
Post by: cijanzen on Fri, 17 August 2018, 20:56:13
What color is going to match my taro set the best? I was thinking gray blue may look gud but im not sure.
Dark grey or black imo.
You both think the purple is too much? It matches the Taro mods so well.
I think purple would look nice. I can’t remember which page but someone did a rough mock-up of the purple with taro in the previous gb thread.
Post by: roymt76 on Fri, 17 August 2018, 22:06:40
Do you have any comparison between those two.
https://imgur.com/a/PcfAP
which one is black, which one is grey, there is too much filter on these photo that made me hard to imagine the different
Post by: cijanzen on Fri, 17 August 2018, 22:08:27
I'm considering about Black and gray one :(
Do you have any comparison between those two.
https://imgur.com/a/PcfAP
which one is black, which one is grey, there is too much filter on these photo that made me hard to imagine the different
If I’m not mistaken those are all grey (except the purple) as the shots are from R1 and they had not made a black one yet at that time.
Post by: JDragon on Fri, 17 August 2018, 22:12:38
Post by: PlayKeyboardTW on Sat, 18 August 2018, 00:49:21
I'm considering about Black and gray one :(
Do you have any comparison between those two.
https://imgur.com/a/PcfAP
which one is black, which one is grey, there is too much filter on these photo that made me hard to imagine the different
If I’m not mistaken those are all grey (except the purple) as the shots are from R1 and they had not made a black one yet at that time.
Oh I know that one! Yeah purple might be great as well!
If we just want a BT PCB/plate, is it still 45 shipping? Would love to add BT to my R1 CA66.
No, it will be calculated separately. You can choose 2 kinds of shipping when checking out. :thumb:
Post by: roymt76 on Sat, 18 August 2018, 01:01:34
So all the picture in that link is gray right ?I'm considering about Black and gray one :(
Do you have any comparison between those two.
https://imgur.com/a/PcfAP
which one is black, which one is grey, there is too much filter on these photo that made me hard to imagine the different
If I’m not mistaken those are all grey (except the purple) as the shots are from R1 and they had not made a black one yet at that time.
Oh I know that one! Yeah purple might be great as well!
it darker than i imagine
Post by: PlayKeyboardTW on Sat, 18 August 2018, 01:20:20
So all the picture in that link is gray right ?I'm considering about Black and gray one :(
Do you have any comparison between those two.
https://imgur.com/a/PcfAP
which one is black, which one is grey, there is too much filter on these photo that made me hard to imagine the different
If I’m not mistaken those are all grey (except the purple) as the shots are from R1 and they had not made a black one yet at that time.
Oh I know that one! Yeah purple might be great as well!
it darker than i imagine
Yes it's our commercial grey. That's why we call it dark grey. :eek:
Post by: macken on Sat, 18 August 2018, 04:49:27
In the pictures on the site it looks similar to the silver option.
Post by: PlayKeyboardTW on Sat, 18 August 2018, 06:58:00
Don't now if this has been asked before, but how white is the white option? Is it plain white or off-white?
In the pictures on the site it looks similar to the silver option.
Milk white. The silver is still with a bit grey as you can see in pics. :)
Post by: boxfrommoon on Sat, 18 August 2018, 07:09:19
Don't now if this has been asked before, but how white is the white option? Is it plain white or off-white?I too would like to know. I have been thinking that this would finally be the board to put my gmk 9009 on. That's why I would actually prefer off-white over pure white.
In the pictures on the site it looks similar to the silver option.
Sent from my ONEPLUS A5000 using Tapatalk
EDIT: Milky white actually sounds really good also!
Post by: Tordp on Sat, 18 August 2018, 08:03:01
Just ordered this telephone cord I'm going to modify for use with the dark red CA66!
(Attachment Link)
This cable is a perfect match with Dark Red. Are you going to replace the RJ45s with USB connectors? You have enough wires for that inside the cable?
Post by: cijanzen on Sat, 18 August 2018, 08:35:16
Just ordered this telephone cord I'm going to modify for use with the dark red CA66!
(Attachment Link)
This cable is a perfect match with Dark Red. Are you going to replace the RJ45s with USB connectors? You have enough wires for that inside the cable?
Because I’m only doing USB 2.0 specs it only requires four connections so just enough to work. Still sourcing my USB connectors but Zap cables has them for example.
Post by: coffeeshopcoder on Sat, 18 August 2018, 14:37:44
I want to do a unique color, for such a nice case, which is why I'm thinking grey blue. thoughts ?
Post by: cijanzen on Sat, 18 August 2018, 14:42:29
I'm thinking I'll do either the grey blue / drak grey or black (not sure which caps go well with it - I have nautilus, SA Carbon, SA Foundation, 9009, DSA Royal Navy and XDA Canvas ). I should have gotten in on Serika :(
I want to do a unique color, for such a nice case, which is why I'm thinking grey blue. thoughts ?
The blue is really nice and unique and definitely goes well with Nautilus or neutral sets like 9009. That’s my vote for you!
Post by: coffeeshopcoder on Sat, 18 August 2018, 14:44:53
I'm thinking getting two PCBs and Plates - Alum ALPS/Blue-tooth PCB pair as well as a Brass Plate/Wired PCB pair for MX.
Question :
-- Is the default alum plate mandatory, can I switch that with an alum alps plate ? (can I pay the difference in price for the alps plate)
-- what stabs and caps will work ? I see stabs on the Mathias site, and caps on mechanicalkeyboards.com, would those work ?
Post by: coffeeshopcoder on Sat, 18 August 2018, 16:04:18
I'm thinking I'll do either the grey blue / drak grey or black (not sure which caps go well with it - I have nautilus, SA Carbon, SA Foundation, 9009, DSA Royal Navy and XDA Canvas ). I should have gotten in on Serika :(
I want to do a unique color, for such a nice case, which is why I'm thinking grey blue. thoughts ?
The blue is really nice and unique and definitely goes well with Nautilus or neutral sets like 9009. That’s my vote for you!
Post by: cijanzen on Sat, 18 August 2018, 16:39:25
Yah I'm zero-ing in on the blue... BTW, GMK Jamon might go well with your dark red as well.. if that happens to be run that is...I'm thinking I'll do either the grey blue / drak grey or black (not sure which caps go well with it - I have nautilus, SA Carbon, SA Foundation, 9009, DSA Royal Navy and XDA Canvas ). I should have gotten in on Serika :(
I want to do a unique color, for such a nice case, which is why I'm thinking grey blue. thoughts ?
The blue is really nice and unique and definitely goes well with Nautilus or neutral sets like 9009. That’s my vote for you!
Yeah, I’ve mocked up Jamon and Royalty and the bright red mods on Jamon just don’t do it for me. It still looks very nice though!
Post by: ye_cole on Sun, 19 August 2018, 06:29:53
Just ordered this telephone cord I'm going to modify for use with the dark red CA66!
(Attachment Link)
the build you have planned seems ****ing dope and i cannot wait to see it
Post by: cijanzen on Sun, 19 August 2018, 08:20:47
Just ordered this telephone cord I'm going to modify for use with the dark red CA66!
(Attachment Link)
the build you have planned seems ****ing dope and i cannot wait to see it
Thanks! I will definitely be sure to share. I think your Royalty set will really pull it together nicely. I just hope it happens sooner than later!
Post by: dondongler on Sun, 19 August 2018, 09:57:54
What color is going to match my taro set the best? I was thinking gray blue may look gud but im not sure.
Dark grey or black imo.
You both think the purple is too much? It matches the Taro mods so well.
I think purple would look nice. I can’t remember which page but someone did a rough mock-up of the purple with taro in the previous gb thread.
Awesome thank you. I'll probably go purple and switch between my taro and laser sets.
Post by: pixelpusher on Sun, 19 August 2018, 14:23:27
http://ydkb.io/
Am I overlooking something?
Post by: Oatburner on Sun, 19 August 2018, 16:05:10
Post by: cijanzen on Sun, 19 August 2018, 16:06:44
I have a round 1 CA66 and am interested in getting a Bluetooth pcb for it. Could someone confirm that the new plates and PCBs will support the round 1 cases?
Yep they’re the same!
Post by: Vizir on Sun, 19 August 2018, 16:29:49
Post by: Ephemeral on Sun, 19 August 2018, 18:04:17
What are the dimensions of the board? I am planning to get a carrying case for it.
This info is from the IC thread
Quote
365mm x 168mm, 1365g with SA keycaps approximately
Post by: Vizir on Sun, 19 August 2018, 18:51:30
ThanksWhat are the dimensions of the board? I am planning to get a carrying case for it.
This info is from the IC threadQuote365mm x 168mm, 1365g with SA keycaps approximately
Post by: PlayKeyboardTW on Sun, 19 August 2018, 20:31:13
I don't see a way to configure for WKL version on this site:
http://ydkb.io/
Am I overlooking something?
Here, need to mark up this option. ;)
[attach=1]
I have a round 1 CA66 and am interested in getting a Bluetooth pcb for it. Could someone confirm that the new plates and PCBs will support the round 1 cases?
Sure they fit R1 cases. :thumb:
ThanksWhat are the dimensions of the board? I am planning to get a carrying case for it.
This info is from the IC threadQuote365mm x 168mm, 1365g with SA keycaps approximately
Thanks for helping! :-*
Post by: MisterKnife on Mon, 20 August 2018, 01:50:55
Post by: typischt on Mon, 20 August 2018, 01:53:15
Post by: PlayKeyboardTW on Mon, 20 August 2018, 03:06:41
qq does the bluetooth version of the PCB also come with usb-c?
Yes.
Is there a reason, that, according to the site, you have to pick the more expensive shipping methode?
Because all CA66 stuffs are packaged and shipped in factory directly, which is located in CN.
They are not going to be shipped to TW first.
We have a guy supervise and QC there, so TW post is not available. ;)
Post by: typischt on Mon, 20 August 2018, 03:08:34
Okay, perfect, thanks for the fast response!Is there a reason, that, according to the site, you have to pick the more expensive shipping methode?
Because all CA66 stuffs are packaged and shipped in factory directly. They are not going to be shipped to TW first.
We have a guy supervise and QC there, so TW post is not available. ;)
Post by: PlayKeyboardTW on Mon, 20 August 2018, 03:13:34
Okay, perfect, thanks for the fast response!Is there a reason, that, according to the site, you have to pick the more expensive shipping methode?
Because all CA66 stuffs are packaged and shipped in factory directly. They are not going to be shipped to TW first.
We have a guy supervise and QC there, so TW post is not available. ;)
Thanks for the understanding. We did have a debate for how to ship individual extra parts orders.
Sorry for making DHL Express the only option. We promise to keep this round as smooth as last one. :thumb:
Post by: mushubanane on Mon, 20 August 2018, 16:10:14
Post by: fer.real on Mon, 20 August 2018, 16:28:40
Post by: teh_pengers on Mon, 20 August 2018, 16:32:50
Post by: PlayKeyboardTW on Mon, 20 August 2018, 21:43:27
Anybody who has the CA66 from the first round can tell us about the status of their "CA66" badge? Does it take dirt easily and does it look bad with it? Or does it look even better a bit worn out :) ? Struggling hard with the WKL version.
It's coated, don't worry. ;)
I have one from the last round. The badge is still as shiny as the day I got it.
Good to hear that! :thumb:
Are there any pictures of the plate colors other than the brass?
Sorry, forgot to take photos for all alu plates. :'(
You can find them in last GB thread, starting on page 13 I think.
Post by: mushubanane on Tue, 21 August 2018, 03:34:06
While I'm at it, anybody has a picture of a non-purple CA66 with SA Hyperfuse? I'd like to have a more polyvalent case than purple but can't decide which one :rolleyes:
Post by: roymt76 on Tue, 21 August 2018, 03:53:26
Reassuring then :thumb:i want to see non-purple Ca66 with SA hyperfuse too :D
While I'm at it, anybody has a picture of a non-purple CA66 with SA Hyperfuse? I'd like to have a more polyvalent case than purple but can't decide which one :rolleyes:
I have one new set and didnt use it yet
Post by: Taques on Tue, 21 August 2018, 17:59:02
I'll have SA Symbiosis, SA Godspeed, SA Carbon, and SA Pulse that I would like to use on it. Maybe silver might be the best color choice for these sets?
Post by: cijanzen on Tue, 21 August 2018, 18:32:17
Struggling with choosing a color :confused:
I'll have SA Symbiosis, SA Godspeed, SA Carbon, and SA Pulse that I would like to use on it. Maybe silver might be the best color choice for these sets?
That’s a tough one due to the amount of possible colours. I’d definitely go with something neutral like silver or dark grey. White could look good with some of those sets too but might be too much contrast with some of them.
Post by: jrfhoutx on Tue, 21 August 2018, 18:34:39
Struggling with choosing a color :confused:
I'll have SA Symbiosis, SA Godspeed, SA Carbon, and SA Pulse that I would like to use on it. Maybe silver might be the best color choice for these sets?
yeah, silver or dark grey.
Post by: bcbishop on Tue, 21 August 2018, 19:15:41
Struggling with choosing a color :confused:
I'll have SA Symbiosis, SA Godspeed, SA Carbon, and SA Pulse that I would like to use on it. Maybe silver might be the best color choice for these sets?
FWIW, I have a dark grey from the prior round, and I haven't loved the way my Godspeed caps look on it. Too contrasty. (Carbon would be great, though, and I suspect Symbiosis will as well. SA Calm Depths also looks aces on it.)
That said, I'm also planning on picking up either a silver or white CA66 in this round for use with Godspeed and/or Symbiosis. ;D
Post by: ramblinrose on Tue, 21 August 2018, 19:38:03
Post by: hhkbp2 on Tue, 21 August 2018, 21:37:52
Reassuring then :thumb:i want to see non-purple Ca66 with SA hyperfuse too :D
While I'm at it, anybody has a picture of a non-purple CA66 with SA Hyperfuse? I'd like to have a more polyvalent case than purple but can't decide which one :rolleyes:
I have one new set and didnt use it yet
(https://farm5.staticflickr.com/4718/24869151867_db96f2201f_b.jpg)
from https://www.ptt.cc/bbs/Key_Mou_Pad/M.1516181932.A.975.html
Post by: cijanzen on Tue, 21 August 2018, 21:39:20
Struggling with choosing a color :confused:
I'll have SA Symbiosis, SA Godspeed, SA Carbon, and SA Pulse that I would like to use on it. Maybe silver might be the best color choice for these sets?
FWIW, I have a dark grey from the prior round, and I haven't loved the way my Godspeed caps look on it. Too contrasty. (Carbon would be great, though, and I suspect Symbiosis will as well. SA Calm Depths also looks aces on it.)
That said, I'm also planning on picking up either a silver or white CA66 in this round for use with Godspeed and/or Symbiosis. ;D
White would look really nice and a good throwback for symbiosis!
Post by: coffeeshopcoder on Tue, 21 August 2018, 23:26:49
Post by: PlayKeyboardTW on Wed, 22 August 2018, 00:03:59
@PlayKeyboardTW Is there a way I could just get an Alps alum plate and a Brass plate without the default alum plate ?
No sorry. The designer defined case + alu switch plate + PCB as a basic set. :-[
Post by: coffeeshopcoder on Wed, 22 August 2018, 00:33:14
@PlayKeyboardTW Is there a way I could just get an Alps alum plate and a Brass plate without the default alum plate ?
No sorry. The designer defined case + alu switch plate + PCB as a basic set. :-[
Post by: mushubanane on Wed, 22 August 2018, 01:29:30
Reassuring then :thumb:i want to see non-purple Ca66 with SA hyperfuse too :D
While I'm at it, anybody has a picture of a non-purple CA66 with SA Hyperfuse? I'd like to have a more polyvalent case than purple but can't decide which one :rolleyes:
I have one new set and didnt use it yetShow Image(https://farm5.staticflickr.com/4718/24869151867_db96f2201f_b.jpg)
from https://www.ptt.cc/bbs/Key_Mou_Pad/M.1516181932.A.975.html
Thanks! This photo session :eek:
Post by: Macflag on Wed, 22 August 2018, 04:50:20
Post by: roymt76 on Wed, 22 August 2018, 04:56:13
with me ~1.34kg is to light :(
Post by: Lormania on Thu, 23 August 2018, 11:51:26
Is there some way to make it more heavy
with me ~1.34kg is to light :(
There is space inside the case to line with weights if you wanted
Post by: donutholer on Fri, 24 August 2018, 00:41:55
Post by: PlayKeyboardTW on Fri, 24 August 2018, 00:47:44
Is there some way to make it more heavy
with me ~1.34kg is to light :(
There is space inside the case to line with weights if you wanted
You can consider to put in a foam for both raising a bit weight and reduce the hollow sound. ;)
Can you share the plate files so I can cut my own alps plate?
It's already uploaded, in R1 GB thread.
We'll put it in here again. :thumb:
Download CA66 files here: https://goo.gl/DXNwqL
Post by: gutsack on Fri, 24 August 2018, 02:38:41
Post by: roymt76 on Fri, 24 August 2018, 03:11:25
which kind of foam that heavy and reduce the hollow soundIs there some way to make it more heavy
with me ~1.34kg is to light :(
There is space inside the case to line with weights if you wanted
You can consider to put in a foam for both raising a bit weight and reduce the hollow sound. ;)Can you share the plate files so I can cut my own alps plate?
It's already uploaded, in R1 GB thread.
We'll put it in here again. :thumb:
Download CA66 files here: https://goo.gl/DXNwqL
BTW that was the old plate, maybe he one the new plate for bluetooth version
Post by: PlayKeyboardTW on Fri, 24 August 2018, 05:55:20
which kind of foam that heavy and reduce the hollow soundIs there some way to make it more heavy
with me ~1.34kg is to light :(
There is space inside the case to line with weights if you wanted
You can consider to put in a foam for both raising a bit weight and reduce the hollow sound. ;)Can you share the plate files so I can cut my own alps plate?
It's already uploaded, in R1 GB thread.
We'll put it in here again. :thumb:
Download CA66 files here: https://goo.gl/DXNwqL
BTW that was the old plate, maybe he one the new plate for bluetooth version
EVA. If you can find a suitable thickness.
But CA66 was intentionally reduced weight when designing.
Alps plate file will be released after GB ends.
Post by: macclack on Fri, 24 August 2018, 20:39:24
Post by: PlayKeyboardTW on Fri, 24 August 2018, 21:49:24
Is the dark red going to match the dark red from r1? It was more of a brown than red, which is a good thing IMO.
Yes it will be the same. The performance might depends on light sources. :cool:
[attach=1]
Post by: krey on Fri, 24 August 2018, 23:57:24
And now for the wait... :)
Post by: konstantin on Sat, 25 August 2018, 11:24:08
- Is the BT PCB USB-C and does it support C to C?
- Does the BT PCB come with a daughter board for the connector like the default one does?
- There were mentions of putting the RGB LEDs on a raised daughter board to prevent light bleed. Was this done, and if so, do both the default and BT PCBs have it?
- Do you have pictures of the different colored alu plates, primarily red?
- Why did the designer decide that the brass plate wouldn't be an option in the main offering? The alu plate is a waste of money for most people who are getting brass plates.
Post by: dr_unconscionable on Sat, 25 August 2018, 14:15:18
Post by: Taques on Sat, 25 August 2018, 16:03:33
Post by: jrfhoutx on Sat, 25 August 2018, 17:21:11
Sorry if this has already been answered: If you order a CA66 kit, and then order an extra PCB and plate do we need to pay shipping for the extras, or will they all be shipped together?
IDK about this round, but I would assume it would be the same as last round. Last round everything was packed and shipped together.
Post by: steamykeebs on Sat, 25 August 2018, 19:49:17
Thanks.
Post by: PlayKeyboardTW on Sat, 25 August 2018, 21:57:03
- Is the BT PCB USB-C and does it support C to C?
- Does the BT PCB come with a daughter board for the connector like the default one does?
- There were mentions of putting the RGB LEDs on a raised daughter board to prevent light bleed. Was this done, and if so, do both the default and BT PCBs have it?
- Do you have pictures of the different colored alu plates, primarily red?
- Why did the designer decide that the brass plate wouldn't be an option in the main offering? The alu plate is a waste of money for most people who are getting brass plates.
About Q1 and Q2, the answer is yes.
BT PCB will remain the same as it was before. Since it's YANG's production, we can't force him to do that mod unless he wants to.
Red plate pic, credit to Oatburner :thumb:
[attach=1]
No comment on his plate decision, but we did send him feedback about this.
He promised he will make a change in his next design. ;)
Post by: PlayKeyboardTW on Sat, 25 August 2018, 22:08:58
Any idea when we might see a render / sample of the final army green colour on the product page?
Yes, until we are satisfied with the sample. ;)
We had made a couple of versions, and time by time they were getting close to the green we want.
Sorry if this has already been answered: If you order a CA66 kit, and then order an extra PCB and plate do we need to pay shipping for the extras, or will they all be shipped together?
They will all be shipped together. No additional fees. :thumb:
So just to be sure, does the non-BT PCB support flashing firmware using the QMK toolbox? Meaning its not like the round 1 PCB which could flash a QMK hex file but only with the ydkb.io reflash tool? If it does support the QMK toolbox, will I have to change the bootloader to use it or will it work out of the box?
Thanks.
CA66 PCBs are using HID bootloader, not normal dfu. So the original toolbox won't support unless there's an upgrade.
In last round wjchen made a QMK toolbox that supports HID bootloader. :thumb:
You guys can check it out here: https://geekhack.org/index.php?topic=93542.msg2616991#msg2616991 (https://geekhack.org/index.php?topic=93542.msg2616991#msg2616991)
Post by: steamykeebs on Sun, 26 August 2018, 00:00:17
CA66 PCBs are using HID bootloader, not normal dfu. So the original toolbox won't support unless there's an upgrade.
In last round wjchen made a QMK toolbox that supports HID bootloader. :thumb:
You guys can check it out here: https://geekhack.org/index.php?topic=93542.msg2616991#msg2616991 (https://geekhack.org/index.php?topic=93542.msg2616991#msg2616991)
Ah, yes. I read that thread but forgot about wjchen's fork of QMK toolbox that supports HID bootloader. Did some research and it looks like wjchen's pull request was merged last month and so QMK toolbox will officially support HID. The only issue is that there hasn't been a new official release since that change (the current latest version is from December 2017). Hopefully, a new version with HID bootloader support will be release sometime before the round 2 keyboards ship.
Post by: jrfhoutx on Sun, 26 August 2018, 00:10:10
it's an easy fix to make everything correct, just assign the up arrow to the bottom right key and the bottom right key to the up arrow location, but it's pretty annoying to have to do that.
Post by: PlayKeyboardTW on Sun, 26 August 2018, 00:41:23
You guys might want to look at the configuration for the online TMK editor, currently it swaps two keys, the up arrow key location of the arrow cluster and the bottom key location of the right hand mod cluster.
it's an easy fix to make everything correct, just assign the up arrow to the bottom right key and the bottom right key to the up arrow location, but it's pretty annoying to have to do that.
Hi, I contacted YANG for checking the flaw you said, and there's nothing swapped.
I myself had built several CA66s including from R1 and China GB, and didn't meet the situation you mentioned.
Do you mind to help us check it again? ;)
Post by: Rykno on Sun, 26 August 2018, 02:16:44
Post by: jrfhoutx on Sun, 26 August 2018, 15:47:12
You guys might want to look at the configuration for the online TMK editor, currently it swaps two keys, the up arrow key location of the arrow cluster and the bottom key location of the right hand mod cluster.
it's an easy fix to make everything correct, just assign the up arrow to the bottom right key and the bottom right key to the up arrow location, but it's pretty annoying to have to do that.
Hi, I contacted YANG for checking the flaw you said, and there's nothing swapped.
I myself had built several CA66s including from R1 and China GB, and didn't meet the situation you mentioned.
Do you mind to help us check it again? ;)
yeah, I'll help you check it again, let me know what you need me to do.
I flashed a fresh tmk hex download 3 times last night, thinking I had made a mistake.
Post by: PlayKeyboardTW on Sun, 26 August 2018, 19:51:06
What lighting options can be used with the strip next to the nav column?
So many. :eek:
You guys might want to look at the configuration for the online TMK editor, currently it swaps two keys, the up arrow key location of the arrow cluster and the bottom key location of the right hand mod cluster.
it's an easy fix to make everything correct, just assign the up arrow to the bottom right key and the bottom right key to the up arrow location, but it's pretty annoying to have to do that.
Hi, I contacted YANG for checking the flaw you said, and there's nothing swapped.
I myself had built several CA66s including from R1 and China GB, and didn't meet the situation you mentioned.
Do you mind to help us check it again? ;)
yeah, I'll help you check it again, let me know what you need me to do.
I flashed a fresh tmk hex download 3 times last night, thinking I had made a mistake.
;D No worries. At least we know it's fine now. :thumb:
Post by: steamykeebs on Sun, 26 August 2018, 20:16:18
Post by: PlayKeyboardTW on Sun, 26 August 2018, 20:54:52
ONe more QMK related question. Do the leds work with QMK?
Sure they do. ;)
Post by: KingzandBean on Mon, 27 August 2018, 18:28:50
Post by: Vizir on Mon, 27 August 2018, 18:30:41
Question: I was a bit confused by the layout pic, does the split spacebar layout only work with the HHKB style CA66 or does it also work with the winkeyless version?Good question. I'm also torn between the two layouts... Can't decide.
Post by: Sythe on Mon, 27 August 2018, 20:10:36
Question: I was a bit confused by the layout pic, does the split spacebar layout only work with the HHKB style CA66 or does it also work with the winkeyless version?
I believe it should be fine to do on either layout. My understanding is there is only 1 plate layout and just the top half of the board changes to have either badge or cutout.
Its a hard choice to make though...the badge looks so nice, but I don't think I'd want to give up the extra key.
Split spacebar is what is winning me over to this compared to other options though.
Now just to decide on the colour.
Post by: PlayKeyboardTW on Mon, 27 August 2018, 21:16:08
Question: I was a bit confused by the layout pic, does the split spacebar layout only work with the HHKB style CA66 or does it also work with the winkeyless version?
Both versions are using the same plates and PCBs. So the only difference is the extra key on the left control location. ;)
Post by: befbef on Tue, 28 August 2018, 14:05:35
Post by: tex_live_utility on Tue, 28 August 2018, 15:08:06
Post by: cijanzen on Tue, 28 August 2018, 15:58:44
Does anyone know if there's room for a layer of dampening phone between the PCB and the bottom of the case?
Yes
Post by: PlayKeyboardTW on Tue, 28 August 2018, 19:50:54
Just to be absolutely sure: There's no chance to make the pcb hotswappable (with Holtites, Mil Max or anything), right?
We don't know about it and never test these two components before.
How do you plan to mount the PCB iin CA66 if it's hotswappable?
Does anyone know if there's room for a layer of dampening phone between the PCB and the bottom of the case?
Yes
Yes. :))
Post by: roymt76 on Wed, 29 August 2018, 12:05:46
Sadly that i'm think about case color again
You guy have any image compare gray and black, in the same picture
:?
Post by: befbef on Wed, 29 August 2018, 12:13:43
Just to be absolutely sure: There's no chance to make the pcb hotswappable (with Holtites, Mil Max or anything), right?
We don't know about it and never test these two components before.
How do you plan to mount the PCB iin CA66 if it's hotswappable?
Perhaps soldering 4 switches, but I think the sockets have enough friction that mounting isn't needed. I have some hotswap boards without screws and no problems at all.
Do you know the diameter of the holes?
Post by: japanitrat on Wed, 29 August 2018, 13:08:07
Just to be absolutely sure: There's no chance to make the pcb hotswappable (with Holtites, Mil Max or anything), right?
We don't know about it and never test these two components before.
How do you plan to mount the PCB iin CA66 if it's hotswappable?Does anyone know if there's room for a layer of dampening phone between the PCB and the bottom of the case?
Yes
Yes. :))
Friction will hold it. 68 switches are easily enough to hold the PCB in the air. I have 4+ boards like that.
Post by: vonswoopington on Wed, 29 August 2018, 17:59:44
Post by: PlayKeyboardTW on Wed, 29 August 2018, 20:55:51
Just to be absolutely sure: There's no chance to make the pcb hotswappable (with Holtites, Mil Max or anything), right?
We don't know about it and never test these two components before.
How do you plan to mount the PCB iin CA66 if it's hotswappable?
Perhaps soldering 4 switches, but I think the sockets have enough friction that mounting isn't needed. I have some hotswap boards without screws and no problems at all.
Do you know the diameter of the holes?
The hole is 1.3mm, and 2,3mm with pad. :thumb:
Post by: ctrl on Thu, 30 August 2018, 05:21:46
The default pcb now supports programmable RGB LEDs, correct? The previous pcb wasn't programmable, just a light strip, if I remember it correctly.
How is the USB-C connector on YANG's BT pcb? I understand it's not on a daughter board so how is the fit when not using BT and using the USB-C connector instead.
Reeeally interested in that white CA66, even though I already have the luxurious dark red since last round. :cool:
Post by: PlayKeyboardTW on Thu, 30 August 2018, 10:23:20
Just for clarification purposes as I'm on the fence on buying either another CA66 or just an extra pcb:
The default pcb now supports programmable RGB LEDs, correct? The previous pcb wasn't programmable, just a light strip, if I remember it correctly.
How is the USB-C connector on YANG's BT pcb? I understand it's not on a daughter board so how is the fit when not using BT and using the USB-C connector instead.
Reeeally interested in that white CA66, even though I already have the luxurious dark red since last round. :cool:
It's still RGB LED strip, following animations that TMK and QMK provide.
BT PCB still has a daughter board, same as the default one. ;)
Post by: Lyle88 on Thu, 30 August 2018, 22:23:46
I'm unsure whether to buy the black or white case.
If money was no object I would buy the black case and buy SA troubled minds r2, but that's probably a bit much..
I have SA Carbon but I'm missing the modifiers extension so unless I can find it on mechmarket (unlikely) I may not be able to use it..
I'm thinking the easiest option might be to buy the white case and pick up a set of DSA Honeywell caps.
Has anyone seen photos of DSA profile caps on the CA66?
If they look alright I will get a white case, otherwise I'll get a black one and keep my eyes open for something in SA profile..
Sent from my Pixel XL using Tapatalk
Post by: cijanzen on Thu, 30 August 2018, 22:34:38
I'm looking for people's opinions:
I'm unsure whether to buy the black or white case.
If money was no object I would buy the black case and buy SA troubled minds r2, but that's probably a bit much..
I have SA Carbon but I'm missing the modifiers extension so unless I can find it on mechmarket (unlikely) I may not be able to use it..
I'm thinking the easiest option might be to buy the white case and pick up a set of DSA Honeywell caps.
Has anyone seen photos of DSA profile caps on the CA66?
If they look alright I will get a white case, otherwise I'll get a black one and keep my eyes open for something in SA profile..
Sent from my Pixel XL using Tapatalk
The white case is much more unique and would pair nicely with many sets. That gets my vote!
Post by: fo0jin on Fri, 31 August 2018, 03:58:15
Post by: dondongler on Fri, 31 August 2018, 20:21:19
Post by: PlayKeyboardTW on Fri, 31 August 2018, 20:36:39
I bought in a few days ago and want to add a brass plate to the order. Is it possible to bundle this shipping with the rest of the board so i don't have to pay additional post?
Hi, please send us an email directly for adding items. :thumb:
Post by: Lyle88 on Sat, 01 September 2018, 07:16:04
I decided on the white in the end, I'm hoping I can either find the missing keys for my SA Carbon set, or sell them and look for a set of Honeywell keys that have the correct size mods. YEEET!I'm looking for people's opinions:
I'm unsure whether to buy the black or white case.
If money was no object I would buy the black case and buy SA troubled minds r2, but that's probably a bit much..
I have SA Carbon but I'm missing the modifiers extension so unless I can find it on mechmarket (unlikely) I may not be able to use it..
I'm thinking the easiest option might be to buy the white case and pick up a set of DSA Honeywell caps.
Has anyone seen photos of DSA profile caps on the CA66?
If they look alright I will get a white case, otherwise I'll get a black one and keep my eyes open for something in SA profile..
Sent from my Pixel XL using Tapatalk
The white case is much more unique and would pair nicely with many sets. That gets my vote!
Sent from my Pixel XL using Tapatalk
Post by: Vizir on Sat, 01 September 2018, 11:01:40
Post by: Lyle88 on Sat, 01 September 2018, 17:02:13
When does the group but end, ie. Is Sept 5th included? And which time zone? I am traveling and will be returning sometime on the 4th... Central US time. Want to make sure I don't miss this GB.Why not just join now rather than chance it?
Sent from my Pixel XL using Tapatalk
Post by: PlayKeyboardTW on Sat, 01 September 2018, 22:05:12
When does the group but end, ie. Is Sept 5th included? And which time zone? I am traveling and will be returning sometime on the 4th... Central US time. Want to make sure I don't miss this GB.
It'll be PDT. Won't be too accurate so you might have some extra time to join. :p
When does the group but end, ie. Is Sept 5th included? And which time zone? I am traveling and will be returning sometime on the 4th... Central US time. Want to make sure I don't miss this GB.Why not just join now rather than chance it?
Good saying hahaha :D
Post by: soakedcardinal on Sun, 02 September 2018, 21:18:12
Thanks
Post by: cijanzen on Sun, 02 September 2018, 21:27:53
Post by: jrfhoutx on Sun, 02 September 2018, 23:09:05
Post by: PlayKeyboardTW on Mon, 03 September 2018, 01:01:08
I apologize if this has been answered before, but will it be possible to git an alps plate in place of the default plate at no extra cost? I don't need two :thumb:
Thanks
Sorry to say no. :-X
Would this battery: https://m.aliexpress.com/item/32820875729.html?pid=808_0000_0101&spm=a2g0n.search-amp.list.32820875729&aff_trace_key=6a61fd7838f946c4bc418407ca8645d1-1495827122980-06676-F233fuf&aff_short_key=F233fuf&aff_platform=msite (https://m.aliexpress.com/item/32820875729.html?pid=808_0000_0101&spm=a2g0n.search-amp.list.32820875729&aff_trace_key=6a61fd7838f946c4bc418407ca8645d1-1495827122980-06676-F233fuf&aff_short_key=F233fuf&aff_platform=msite) work and do I need anything else like a connector? If I need a connector what should I look for?
You'll need a connector if you want to plug in/out easily. The size will be 1.25mm, 2 pin.
Or you can just remove the receptacle on PCB and solder wires in holes instead.
When ordering spare parts how would we select colors for aluminum plates (both regular and alps)? There isn’t an option to select plate colors. Should we make a note somewhere?
We already realized we missed the color choosing parts for both plates.
It's a bit complicate for setting up the page and we don't think change it during GB period is a good idea.
So we'll send emails to order owners for checking everyone's choice of colors.
Sorry for causing any inconvenience. :(
Post by: konstantin on Mon, 03 September 2018, 07:27:01
Post by: slxdegrees on Mon, 03 September 2018, 07:50:40
Can you post a pic of the gold anodized alu plate? Preferably next to a brass plate so I can see how different they are.Seconded.
Post by: cijanzen on Mon, 03 September 2018, 10:03:54
I apologize if this has been answered before, but will it be possible to git an alps plate in place of the default plate at no extra cost? I don't need two :thumb:
Thanks
Sorry to say no.Would this battery: https://m.aliexpress.com/item/32820875729.html?pid=808_0000_0101&spm=a2g0n.search-amp.list.32820875729&aff_trace_key=6a61fd7838f946c4bc418407ca8645d1-1495827122980-06676-F233fuf&aff_short_key=F233fuf&aff_platform=msite (https://m.aliexpress.com/item/32820875729.html?pid=808_0000_0101&spm=a2g0n.search-amp.list.32820875729&aff_trace_key=6a61fd7838f946c4bc418407ca8645d1-1495827122980-06676-F233fuf&aff_short_key=F233fuf&aff_platform=msite) work and do I need anything else like a connector? If I need a connector what should I look for?
You'll need a connector if you want to plug in/out easily. The size will be 1.25mm, 2 pin.
Or you can just remove the receptacle on PCB and solder wires in holes instead.When ordering spare parts how would we select colors for aluminum plates (both regular and alps)? There isn’t an option to select plate colors. Should we make a note somewhere?
We already realized we missed the color choosing parts for both plates.
It's a bit complicate for setting up the page and we don't think change it during GB period is a good idea.
So we'll send emails to order owners for checking everyone's choice of colors.
Sorry for causing any inconvenience.
Thank you for the clarification on the connector! Can you tell me why the battery in the PCB shot in the IC post has 5 pins? What do the other 3 pins do?
Edit: never mind. I just realized I was looking at the connector for the daughter board and thinking it was for the battery. My bad.
Post by: jrfhoutx on Mon, 03 September 2018, 10:18:57
When ordering spare parts how would we select colors for aluminum plates (both regular and alps)? There isn’t an option to select plate colors. Should we make a note somewhere?
We already realized we missed the color choosing parts for both plates.
It's a bit complicate for setting up the page and we don't think change it during GB period is a good idea.
So we'll send emails to order owners for checking everyone's choice of colors.
Sorry for causing any inconvenience. :(
[/quote]
No inconvenience really, thanks for the clarification!
Post by: Rumblehotep on Mon, 03 September 2018, 16:13:10
Also will the extra parts stop sale on Sep 5 as well?
Post by: PlayKeyboardTW on Mon, 03 September 2018, 22:18:14
I just realized I forgot to grab an extra BT pcb with my order (#1134), would there be a way to add one in?
Also will the extra parts stop sale on Sep 5 as well?
Please send us an email for adding it to your order. :thumb:
Post by: slxdegrees on Mon, 03 September 2018, 22:19:21
Post by: PlayKeyboardTW on Mon, 03 September 2018, 23:18:40
How different is the gold alu plate from the brass plate? Any pictures?
Sorry for missing to reply your question.
Very much different. Gold alu plate is sandblasted, and brass will be mirror-like.
[attach=1]
Post by: vonswoopington on Tue, 04 September 2018, 00:44:36
Is that the grey blue color?How different is the gold alu plate from the brass plate? Any pictures?
Sorry for missing to reply your question.
Very much different. Gold alu plate is sandblasted, and brass will be mirror-like.
(Attachment Link)
Post by: Troif on Tue, 04 September 2018, 00:46:37
With these sets do you think I am right?
My sets:
- SA Oblivion
- SA Calm Depths (whenever it appears on sight)
- SA 1965
- SA Pulse
- SA Jukebox
- SA Modern Selectric Black
- SA Hyperfuse
- SA Cabon
- SA Solarized Dark
White is heavy on me also... very nice also.
Similar I have a Black Exent, and Norbaforce is Grey also... I know I tend to grey colours in my keyboards... but I saw Oblivion in a Grey one with Ti badge and WOW!
Also, why buying anymore PCB or plates? From my other builds those tend to be left in boxes with nothing to say... may be I miss something?
Sent from my iPhone using Tapatalk Pro
Post by: PlayKeyboardTW on Tue, 04 September 2018, 01:12:46
Is that the grey blue color?How different is the gold alu plate from the brass plate? Any pictures?
Sorry for missing to reply your question.
Very much different. Gold alu plate is sandblasted, and brass will be mirror-like.
(Attachment Link)
Yes, the light was a bit too much.
Grey blue is a very hard one to shoot it right imo. :))
I could not resist. Ordered one CA66 in Grey with Titanium Badge and BT PCB....
With these sets do you think I am right?
My sets:
- SA Oblivion
- SA Calm Depths (whenever it appears on sight)
- SA 1965
- SA Pulse
- SA Jukebox
- SA Modern Selectric Black
- SA Hyperfuse
- SA Cabon
- SA Solarized Dark
White is heavy on me also... very nice also.
Similar I have a Black Exent, and Norbaforce is Grey also... I know I tend to grey colours in my keyboards... but I saw Oblivion in a Grey one with Ti badge and WOW!
Also, why buying anymore PCB or plates? From my other builds those tend to be left in boxes with nothing to say... may be I miss something?
Sent from my iPhone using Tapatalk Pro
Some people buy them for spare parts. You can have two kinds of builds by swapping them easily. :))
Post by: roymt76 on Tue, 04 September 2018, 05:45:03
Quote
Ordered <3
Sadly that i'm think about case color again
You guy have any image compare gray and black, in the same picture
:?
Post by: cijanzen on Tue, 04 September 2018, 07:19:15
I could not resist. Ordered one CA66 in Grey with Titanium Badge and BT PCB....
With these sets do you think I am right?
My sets:
- SA Oblivion
- SA Calm Depths (whenever it appears on sight)
- SA 1965
- SA Pulse
- SA Jukebox
- SA Modern Selectric Black
- SA Hyperfuse
- SA Cabon
- SA Solarized Dark
White is heavy on me also... very nice also.
Similar I have a Black Exent, and Norbaforce is Grey also... I know I tend to grey colours in my keyboards... but I saw Oblivion in a Grey one with Ti badge and WOW!
Also, why buying anymore PCB or plates? From my other builds those tend to be left in boxes with nothing to say... may be I miss something?
Sent from my iPhone using Tapatalk Pro
Grey or white would work with most of those sets but I think grey would win out. Jukebox would benefit most from white but most of the rest would either look better with grey or equally as good.
Post by: slxdegrees on Tue, 04 September 2018, 08:02:41
Nice, seems like the gold alu is more muted. Hmm what time on Sep 5th does the GB close by the way?How different is the gold alu plate from the brass plate? Any pictures?
Sorry for missing to reply your question.
Very much different. Gold alu plate is sandblasted, and brass will be mirror-like.
(Attachment Link)
Post by: PlayKeyboardTW on Tue, 04 September 2018, 08:04:29
you miss my question :(QuoteOrdered <3
Sadly that i'm think about case color again
You guy have any image compare gray and black, in the same picture
:?
lol sorry. :confused:
I didn't have a chance for shooting photos to compare them myself. Most cases were shipped directly from China. ^-^
Black is just a bit darker then dark grey, for satisfying some guys' desires.
Nice, seems like the gold alu is more muted. Hmm what time on Sep 5th does the GB close by the way?How different is the gold alu plate from the brass plate? Any pictures?
Sorry for missing to reply your question.
Very much different. Gold alu plate is sandblasted, and brass will be mirror-like.
(Attachment Link)
PDT. But we'll extend a bit to 6th for everyone to join in time. :thumb:
Post by: Troif on Tue, 04 September 2018, 08:54:44
I could not resist. Ordered one CA66 in Grey with Titanium Badge and BT PCB....
With these sets do you think I am right?
My sets:
- SA Oblivion
- SA Calm Depths (whenever it appears on sight)
- SA 1965
- SA Pulse
- SA Jukebox
- SA Modern Selectric Black
- SA Hyperfuse
- SA Cabon
- SA Solarized Dark
White is heavy on me also... very nice also.
Similar I have a Black Exent, and Norbaforce is Grey also... I know I tend to grey colours in my keyboards... but I saw Oblivion in a Grey one with Ti badge and WOW!
Also, why buying anymore PCB or plates? From my other builds those tend to be left in boxes with nothing to say... may be I miss something?
Sent from my iPhone using Tapatalk Pro
Grey or white would work with most of those sets but I think grey would win out. Jukebox would benefit most from white but most of the rest would either look better with grey or equally as good.
Thanks for answering. I am torn between both but, as always, grey is winner. In this case even more for the speciality of the case itself.
Sent from my iPhone using Tapatalk Pro
Post by: bcbishop on Tue, 04 September 2018, 15:03:27
Post by: cijanzen on Tue, 04 September 2018, 15:04:04
Love my grey CA66 from the last round, and just placed an order for a white CA66 from this one! Looking forward to pairing it with Symbiosis (and Godspeed)! :D
Gonna look so good!
Post by: theo313 on Tue, 04 September 2018, 16:56:25
Post by: cijanzen on Tue, 04 September 2018, 17:00:28
Anyone else having a hell of a time choosing which color? So torn between Black and White that I am considering splitting the difference and going for Grey. Help!What kits are you planning on using?
Post by: theo313 on Tue, 04 September 2018, 17:37:33
Anyone else having a hell of a time choosing which color? So torn between Black and White that I am considering splitting the difference and going for Grey. Help!What kits are you planning on using?
The only notable kit I have coming is the GMK Space Cadet, but I wasn't planning on putting that on the CA66. I really like SA Oblivion so I'm looking for something with muted off-white or grey in the same vein. I have been toying around with Miami Nights since last night in my head :cool:
Post by: silversung on Tue, 04 September 2018, 18:23:35
Post by: cijanzen on Tue, 04 September 2018, 18:28:29
Anyone else having a hell of a time choosing which color? So torn between Black and White that I am considering splitting the difference and going for Grey. Help!What kits are you planning on using?
The only notable kit I have coming is the GMK Space Cadet, but I wasn't planning on putting that on the CA66. I really like SA Oblivion so I'm looking for something with muted off-white or grey in the same vein. I have been toying around with Miami Nights since last night in my head :cool:
Based on the kits you just mentioned I’d probably go with black
Post by: Vizir on Tue, 04 September 2018, 20:47:40
edit: is this dark grey?
https://i.imgur.com/7WY5HqU.jpg
https://i.imgur.com/1Hmii7X.jpg
Post by: cijanzen on Tue, 04 September 2018, 21:31:01
thinking of getting dark grey, but asking anyway. which color goes with modern dolch? /dev/tty beige/rgb?
edit: is this dark grey?
https://i.imgur.com/7WY5HqU.jpg
https://i.imgur.com/1Hmii7X.jpg
They’re just renders but looks like grey to me. I’d also recommend grey based on your sets.
Post by: Vizir on Tue, 04 September 2018, 22:38:29
Post by: PlayKeyboardTW on Wed, 05 September 2018, 01:16:11
Love my grey CA66 from the last round, and just placed an order for a white CA66 from this one! Looking forward to pairing it with Symbiosis (and Godspeed)! :D
Love! They will definitely shine together. :thumb:
Anyone else having a hell of a time choosing which color? So torn between Black and White that I am considering splitting the difference and going for Grey. Help!What kits are you planning on using?
The only notable kit I have coming is the GMK Space Cadet, but I wasn't planning on putting that on the CA66. I really like SA Oblivion so I'm looking for something with muted off-white or grey in the same vein. I have been toying around with Miami Nights since last night in my head :cool:
I can totally understand the feeling. :))
Ordered! Had to wait a while because of monies issue, but finally I'm in. Yay!
Thanks! ;D
thinking of getting dark grey, but asking anyway. which color goes with modern dolch? /dev/tty beige/rgb?
edit: is this dark grey?
https://i.imgur.com/7WY5HqU.jpg
https://i.imgur.com/1Hmii7X.jpg
They’re just renders but looks like grey to me. I’d also recommend grey based on your sets.
Yes these are dark grey. Thanks to Janglad. :thumb:
order in. dark grey/red/BT WKL + brass plate. was a tough decision between hhkb and wkl, but in the end, the extra key won.
Cheers! ;D
Post by: DePulse on Wed, 05 September 2018, 01:40:24
Post by: ctrl on Wed, 05 September 2018, 02:22:30
Post by: PlayKeyboardTW on Wed, 05 September 2018, 05:33:47
Hey PlayKeyb! I sent you a message. Kindly check your email :D Thank you!
Okay! :thumb:
The default pcb is compatible with the brass plate from last round, right?
Yes they do. ;D
Post by: ctrl on Wed, 05 September 2018, 06:36:40
The default pcb is compatible with the brass plate from last round, right?
Yes they do. ;D
Great! I ordered two. Just in case my soldering messes something up. ;D
Could you give a breakdown of the major differences between this pcb compared to the previous round? I've picked up bits and pieces in the threads here and there, but it'd be really nice to just see a list. :)
Post by: PlayKeyboardTW on Wed, 05 September 2018, 10:39:45
The default pcb is compatible with the brass plate from last round, right?
Yes they do. ;D
Great! I ordered two. Just in case my soldering messes something up. ;D
Could you give a breakdown of the major differences between this pcb compared to the previous round? I've picked up bits and pieces in the threads here and there, but it'd be really nice to just see a list. :)
The major differences are:
- USB C to C supports
- In switch LEDs IC pin out fix
- RGB LED strip raised a bit for avoiding light leaking
Post by: PlayKeyboardTW on Wed, 05 September 2018, 10:42:52
We refunded some extra parts orders which chose the wrong shipping method.
Please help us check you email and account status.
If you are still fancy getting these parts, place a new order with choosing DHL Express for shipping.
We appreciate it. :thumb:
Post by: slxdegrees on Wed, 05 September 2018, 11:15:13
Post by: jrfhoutx on Wed, 05 September 2018, 11:37:49
Post by: roymt76 on Wed, 05 September 2018, 11:44:30
Will the BT plate .dwg files be made available after the buy is over?Yes, it is
He say that in these previous page
Post by: edasaur on Wed, 05 September 2018, 12:09:31
Last day to join guys!
What time does the GB end? Was gonna make an order during work today, but of course I forget my wallet at home :facepalm:
Post by: PlayKeyboardTW on Wed, 05 September 2018, 12:52:41
Last day to join guys!
What time does the GB end? Was gonna make an order during work today, but of course I forget my wallet at home :facepalm:
23:59:59 PDT. :))
Post by: jrfhoutx on Wed, 05 September 2018, 13:00:21
Will the BT plate .dwg files be made available after the buy is over?Yes, it is
He say that in these previous page
ah, thanks, must've missed that post.
Post by: ctrl on Wed, 05 September 2018, 13:07:18
Last day to join guys!
We refunded some extra parts orders which chose the wrong shipping method.
Please help us check you email and account status.
If you are still fancy getting these parts, place a new order with choosing DHL Express for shipping.
We appreciate it. :thumb:
Daaamn. That was a close call! I did pick the wrong shipping option! Placed a new order for two default pcbs and it should be ok now. Thanks! :thumb:
Post by: Owl- on Wed, 05 September 2018, 14:15:59
Post by: roymt76 on Wed, 05 September 2018, 14:24:16
When ordering spare parts how would we select colors for aluminum plates (both regular and alps)? There isn’t an option to select plate colors. Should we make a note somewhere?
We already realized we missed the color choosing parts for both plates.
It's a bit complicate for setting up the page and we don't think change it during GB period is a good idea.
So we'll send emails to order owners for checking everyone's choice of colors.
Sorry for causing any inconvenience. :(
[/quote]
Here mate
Post by: Owl- on Wed, 05 September 2018, 14:36:38
Here mateWhen ordering spare parts how would we select colors for aluminum plates (both regular and alps)? There isn’t an option to select plate colors. Should we make a note somewhere?
We already realized we missed the color choosing parts for both plates.
It's a bit complicate for setting up the page and we don't think change it during GB period is a good idea.
So we'll send emails to order owners for checking everyone's choice of colors.
Sorry for causing any inconvenience. :(
[/quote]
Cheers!
Post by: edasaur on Wed, 05 September 2018, 20:59:41
Last day to join guys!
What time does the GB end? Was gonna make an order during work today, but of course I forget my wallet at home :facepalm:
23:59:59 PDT. :))
Woot joined! :)
Post by: pixelpusher on Wed, 05 September 2018, 21:44:37
I wish I could see Muted on the blue and gray cases and see Honeywell on the white. Also wonder what ePBT slate will look like on gray.
Post by: slxdegrees on Wed, 05 September 2018, 21:46:45
I'm completely torn on color choice. The red looks the best on it's own, but I've never seen it with keycaps on it that do it justice (maybe 9009). The silver is a classic choice and would go with anything, but it may be boring. White is awesome and looks close to the original PCJr board, but I have a few white boards lined up. Dark gray is always nice. GAAAAAAAAA. I can't decide.The red is really really dark. You can check out NK's YouTube channel he did a build with it last week I believe. I went with white in the end cos I was gonna match it with Metaverse and black didn't seem to go too well with the brass plate.
I wish I could see Muted on the blue and gray cases and see Honeywell on the white. Also wonder what ePBT slate will look like on gray.
Post by: Lyle88 on Thu, 06 September 2018, 00:34:41
Sent from my Pixel XL using Tapatalk
Post by: roymt76 on Thu, 06 September 2018, 00:36:43
Does anyone know if the plate allows the switch top to be opened without desoldering?No
Sent from my Pixel XL using Tapatalk
Plate is not allow open top switch
You can wait till GB ended, they'll public their plate file then you modified it then cut your own plate
Post by: Lyle88 on Thu, 06 September 2018, 00:39:58
Thanks for answering!Does anyone know if the plate allows the switch top to be opened without desoldering?No
Sent from my Pixel XL using Tapatalk
Plate is not allow open top switch
You can wait till GB ended, they'll public their plate file then you modified it then cut your own plate
Sent from my Pixel XL using Tapatalk
Post by: ctrl on Thu, 06 September 2018, 01:19:35
I'm completely torn on color choice. The red looks the best on it's own, but I've never seen it with keycaps on it that do it justice (maybe 9009). The silver is a classic choice and would go with anything, but it may be boring. White is awesome and looks close to the original PCJr board, but I have a few white boards lined up. Dark gray is always nice. GAAAAAAAAA. I can't decide.
I wish I could see Muted on the blue and gray cases and see Honeywell on the white. Also wonder what ePBT slate will look like on gray.
What did you end up going for? I got the Dark Red from last round and can highly recommend it!
This was my reason to get the dark red and I think it's also a good refernce point for any color matching with a red/dark red case. (https://images.generation-msx.nl/hardware/dd3c1aa5.png)
White or grey keycaps is a good match. :thumb:
(Underrated, but the titanium badge is thus a really nice looking match too. It's what I went for and it's a much more sober look than going full brass with dark red.)
Post by: Lyle88 on Thu, 06 September 2018, 01:33:02
Sent from my Pixel XL using Tapatalk
Post by: jrfhoutx on Thu, 06 September 2018, 08:38:06
I'm completely torn on color choice. The red looks the best on it's own, but I've never seen it with keycaps on it that do it justice (maybe 9009). The silver is a classic choice and would go with anything, but it may be boring. White is awesome and looks close to the original PCJr board, but I have a few white boards lined up. Dark gray is always nice. GAAAAAAAAA. I can't decide.
I wish I could see Muted on the blue and gray cases and see Honeywell on the white. Also wonder what ePBT slate will look like on gray.
Red CA66 with GMK Camping (https://www.reddit.com/r/MechanicalKeyboards/comments/9de9cl/time_to_go_hiking/)
Red CA66 with GMK Red Samurai (https://www.reddit.com/r/MechanicalKeyboards/comments/9csuks/gmk_red_samurai_x_ca66_gallery/)
Post by: redjarojam on Thu, 06 September 2018, 11:49:18
Post by: Photoelectric on Thu, 06 September 2018, 12:23:15
Post by: Taques on Thu, 06 September 2018, 13:45:12
Dark red is my favorite, but I also really like blue-gray and olive green options. Chocolate brown was going to be nice too but didn't make it. Personally I prefer the darker versions of the keyboard to silver/white. Dark red/bordeaux makes me think of my favorite fountain pen inks like Diamine Syrah and Colorverse Dark Energy.
Colorverse Dark Energy is such an amazing ink!
Post by: lundmore on Thu, 06 September 2018, 21:40:53
Post by: Vizir on Thu, 06 September 2018, 21:53:41
WTB black > grey > silver HHKB BLE version if anyone is willing to part ways..
Post by: cijanzen on Sat, 08 September 2018, 21:57:29
[attachimg=1]
Post by: ctrl on Mon, 10 September 2018, 01:18:30
I just finished converting an old telephone cord into a USB cable for use with the dark red CA66. I hope the colours turn out!
(Attachment Link)
I got a dark red CA66 last round. I'd say you got the same matching colour! :thumb:
(Personally, I'd go for grey though. It looks great with dark red!)
Post by: PlayKeyboardTW on Mon, 10 September 2018, 06:14:47
Why didn't you join the GB?WTB black > grey > silver HHKB BLE version if anyone is willing to part ways..
:-X
I just finished converting an old telephone cord into a USB cable for use with the dark red CA66. I hope the colours turn out!
(Attachment Link)
This is definitely going to be a nice combo. :thumb:
Post by: JDragon on Tue, 11 September 2018, 02:53:05
Post by: PlayKeyboardTW on Tue, 11 September 2018, 20:56:01
I saw in the IC thread that bright dip anodizing was being considered as a potential option - can we request that or will all boards be matte? I ordered a silver but if glossier silver is possible would be happy to take that up.
All will be matte finish. :)
Post by: PlayKeyboardTW on Tue, 11 September 2018, 21:01:02
We are now sorting out orders.
Please help us check your email if you purchased extra alu plates and alps plates.
We've sent an email for confirming your choices.
And some orders didn't leave case version choice in it, these email address will receive confirmation email as well.
If you have reply the email, please bear with us.
We'll make an online order list and send emails to everyone to see if your order is correct.
Thanks! :thumb:
Post by: parityb1t on Wed, 12 September 2018, 05:16:46
Hi guys!
We are now sorting out orders.
Please help us check your email if you purchased extra alu plates and alps plates.
We've sent an email for confirming your choices.
And some orders didn't leave case version choice in it, these email address will receive confirmation email as well.
If you have reply the email, please bear with us.
We'll make an online order list and send emails to everyone to see if your order is correct.
Thanks! :thumb:
Haven't received email for extra alps plate yet :p
Post by: jrfhoutx on Wed, 12 September 2018, 14:13:28
Hi guys!
We are now sorting out orders.
Please help us check your email if you purchased extra alu plates and alps plates.
We've sent an email for confirming your choices.
And some orders didn't leave case version choice in it, these email address will receive confirmation email as well.
If you have reply the email, please bear with us.
We'll make an online order list and send emails to everyone to see if your order is correct.
Thanks! :thumb:
Nothing here...
Post by: PlayKeyboardTW on Fri, 14 September 2018, 21:15:17
We've sent out all choice confirmation mails to pending choices order owners.
Please help us check your email, even the spam folder.
Reply asap for letting us move to the next step - material ordering. :thumb:
Post by: pixelpusher on Fri, 14 September 2018, 21:35:36
Hi everyone.
We've sent out all choice confirmation mails to pending choices order owners.
Please help us check your email, even the spam folder.
Reply asap for letting us move to the next step - material ordering. :thumb:
If you have spots open up, will we have a chance to get in? I talked myself out of joining and now I regret it. lol
Post by: Lyle88 on Sun, 16 September 2018, 00:25:17
Pretty sure the idea with group buys is that the order is made once the group buy closes. So you will probably have to look on r/mm for one.Hi everyone.
We've sent out all choice confirmation mails to pending choices order owners.
Please help us check your email, even the spam folder.
Reply asap for letting us move to the next step - material ordering. :thumb:
If you have spots open up, will we have a chance to get in? I talked myself out of joining and now I regret it. lol
Sent from my Pixel XL using Tapatalk
Post by: Oatburner on Sun, 16 September 2018, 01:37:29
https://imgur.com/a/nqmewB0
The case and badge have great textures to them.
Post by: ZyBeR on Sun, 16 September 2018, 04:34:42
Sent from my iPad using Tapatalk
Post by: jrfhoutx on Sun, 16 September 2018, 12:19:04
Pretty sure the idea with group buys is that the order is made once the group buy closes. So you will probably have to look on r/mm for one.Hi everyone.
We've sent out all choice confirmation mails to pending choices order owners.
Please help us check your email, even the spam folder.
Reply asap for letting us move to the next step - material ordering. :thumb:
If you have spots open up, will we have a chance to get in? I talked myself out of joining and now I regret it. lol
Sent from my Pixel XL using Tapatalk
Yes, but sometimes people who joined need the money after they've paid and will sell their spot to someone who missed out.
Post by: pixelpusher on Sun, 16 September 2018, 12:36:02
Pretty sure the idea with group buys is that the order is made once the group buy closes. So you will probably have to look on r/mm for one.Hi everyone.
We've sent out all choice confirmation mails to pending choices order owners.
Please help us check your email, even the spam folder.
Reply asap for letting us move to the next step - material ordering. :thumb:
If you have spots open up, will we have a chance to get in? I talked myself out of joining and now I regret it. lol
Sent from my Pixel XL using Tapatalk
Yes, but sometimes people who joined need the money after they've paid and will sell their spot to someone who missed out.
Yep, also it's pretty common for people to not pay their invoices, and the GB runner is left with extra units.
Post by: T0mb3ry on Sun, 16 September 2018, 12:55:09
Hi everyone.
We've sent out all choice confirmation mails to pending choices order owners.
Please help us check your email, even the spam folder.
Reply asap for letting us move to the next step - material ordering. :thumb:
I did not get any confirmation mail for my order either. :/
Post by: vonswoopington on Sun, 16 September 2018, 13:08:51
Same. Nothing here.Hi everyone.
We've sent out all choice confirmation mails to pending choices order owners.
Please help us check your email, even the spam folder.
Reply asap for letting us move to the next step - material ordering. :thumb:
I did not get any confirmation mail for my order either. :/
Post by: edasaur on Sun, 16 September 2018, 13:14:43
I got an email asking whether I wanted WKL vs HHKB for the case version, so that might be what was referred to?Same. Nothing here.Hi everyone.
We've sent out all choice confirmation mails to pending choices order owners.
Please help us check your email, even the spam folder.
Reply asap for letting us move to the next step - material ordering. :thumb:
I did not get any confirmation mail for my order either. :/
Sent from my Pixel 2 XL using Tapatalk
Post by: vonswoopington on Sun, 16 September 2018, 13:20:16
Hmm maybe. I do have a purchase confirmation email and PayPal receipt but no direct communication with OP.I got an email asking whether I wanted WKL vs HHKB for the case version, so that might be what was referred to?Same. Nothing here.Hi everyone.
We've sent out all choice confirmation mails to pending choices order owners.
Please help us check your email, even the spam folder.
Reply asap for letting us move to the next step - material ordering. :thumb:
I did not get any confirmation mail for my order either. :/
Sent from my Pixel 2 XL using Tapatalk
Post by: PlayKeyboardTW on Sun, 16 September 2018, 21:20:43
Hmm maybe. I do have a purchase confirmation email and PayPal receipt but no direct communication with OP.I got an email asking whether I wanted WKL vs HHKB for the case version, so that might be what was referred to?Same. Nothing here.Hi everyone.
We've sent out all choice confirmation mails to pending choices order owners.
Please help us check your email, even the spam folder.
Reply asap for letting us move to the next step - material ordering. :thumb:
I did not get any confirmation mail for my order either. :/
Sent from my Pixel 2 XL using Tapatalk
Some people forgot to choose the case version. Now they are all confirmed. :thumb:
We'll be moving to machining process soon once the factory are free to go.
There are still 3 orders haven't reply the mail of extra alu plate color.
Please confirm them with us soon! ;)
Post by: vonswoopington on Sun, 16 September 2018, 21:26:47
Hmm maybe. I do have a purchase confirmation email and PayPal receipt but no direct communication with OP.I got an email asking whether I wanted WKL vs HHKB for the case version, so that might be what was referred to?Same. Nothing here.Hi everyone.
We've sent out all choice confirmation mails to pending choices order owners.
Please help us check your email, even the spam folder.
Reply asap for letting us move to the next step - material ordering. :thumb:
I did not get any confirmation mail for my order either. :/
Sent from my Pixel 2 XL using Tapatalk
Some people forgot to choose the case version. Now they are all confirmed. :thumb:
We'll be moving to machining process soon once the factory are free to go.
There are still 3 orders haven't reply the mail of extra alu plate color.
Please confirm them with us soon! ;)
Ah okay. I just want to make sure I'm in :)
Post by: Lyle88 on Sun, 16 September 2018, 21:28:16
Is it too late to add one more brass plate to my order?Hmm maybe. I do have a purchase confirmation email and PayPal receipt but no direct communication with OP.I got an email asking whether I wanted WKL vs HHKB for the case version, so that might be what was referred to?Same. Nothing here.Hi everyone.
We've sent out all choice confirmation mails to pending choices order owners.
Please help us check your email, even the spam folder.
Reply asap for letting us move to the next step - material ordering. :thumb:
I did not get any confirmation mail for my order either. :/
Sent from my Pixel 2 XL using Tapatalk
Some people forgot to choose the case version. Now they are all confirmed. :thumb:
We'll be moving to machining process soon once the factory are free to go.
There are still 3 orders haven't reply the mail of extra alu plate color.
Please confirm them with us soon! ;)
Sent from my Pixel XL using Tapatalk
Post by: PlayKeyboardTW on Mon, 17 September 2018, 05:54:17
Post by: Lyle88 on Mon, 17 September 2018, 08:04:20
Sent from my Pixel XL using Tapatalk
Post by: vonswoopington on Mon, 17 September 2018, 08:59:13
Guys. Please check your email for order confirmation mail. :thumb:I can't remember but do we have a choice in aluminum plates colors or is it gold by default?
Post by: slxdegrees on Mon, 17 September 2018, 09:04:40
If you are talking about the extra, then no. You should have received an email from them to clarify. Otherwise, you should already have selected it in the options.Guys. Please check your email for order confirmation mail. :thumb:I can't remember but do we have a choice in aluminum plates colors or is it gold by default?
Post by: vonswoopington on Mon, 17 September 2018, 09:08:05
Thanks. I think I'm good then.If you are talking about the extra, then no. You should have received an email from them to clarify. Otherwise, you should already have selected it in the options.Guys. Please check your email for order confirmation mail. :thumb:I can't remember but do we have a choice in aluminum plates colors or is it gold by default?
Post by: slxdegrees on Mon, 17 September 2018, 09:09:43
You should have received an email with a link to a google spreadsheet from them. Crosscheck your order to ensure that everything is in order. If not, do contact them to clear things up.Thanks. I think I'm good then.If you are talking about the extra, then no. You should have received an email from them to clarify. Otherwise, you should already have selected it in the options.Guys. Please check your email for order confirmation mail. :thumb:I can't remember but do we have a choice in aluminum plates colors or is it gold by default?
Post by: vonswoopington on Mon, 17 September 2018, 09:15:09
Yup just saw the email and everything looks good. Thanks!You should have received an email with a link to a google spreadsheet from them. Crosscheck your order to ensure that everything is in order. If not, do contact them to clear things up.Thanks. I think I'm good then.If you are talking about the extra, then no. You should have received an email from them to clarify. Otherwise, you should already have selected it in the options.Guys. Please check your email for order confirmation mail. :thumb:I can't remember but do we have a choice in aluminum plates colors or is it gold by default?
Post by: mute on Mon, 17 September 2018, 11:13:08
I just want to say whoever is responding to the chat messages on the Play keyboard website is doing a fantastic job! I have made a number of additions to my order and they have been super helpful
Sent from my Pixel XL using Tapatalk
I second this.
Post by: ramblinrose on Tue, 18 September 2018, 08:31:49
Now the wait begins!
Post by: dondongler on Wed, 26 September 2018, 17:01:47
Post by: lazyfart on Fri, 05 October 2018, 20:29:15
Post by: 5inn3d- on Sat, 06 October 2018, 03:02:54
Post by: NINJER on Sun, 07 October 2018, 22:53:21
Sent from my SM-N960F using Tapatalk
Post by: PlayKeyboardTW on Mon, 08 October 2018, 20:55:52
I see the bt pcb is still in stock on the site, is it possible to add one to my order so I can bundle shipping with the rest of my board? Sorry for any trouble this causes.
We might have some extra available for purchasing after GB is done. :thumb:
Will there be a round 3? I just discovered this :( was so keen on alps and Bluetooth compatibility.
Any plans to do hot swap for next group buy? Would be very interested.
No sorry. :-[
any planned extras?
Might be!
Please follow out instagram for updates. :D
Post by: 5inn3d- on Tue, 09 October 2018, 15:53:04
any planned extras?
Might be!
Please follow out instagram for updates. :D
sweet looking forward! :)
Post by: DePulse on Fri, 19 October 2018, 23:12:04
Post by: PM_Your_Switches on Mon, 22 October 2018, 10:06:09
Post by: cijanzen on Mon, 22 October 2018, 10:08:06
I've heard a couple comments while watching build streams that the V2 CA66 is going to have the light strip elevated to help stop the light bleed into the surrounding keys. I can't find documentation of this anywhere; is it true?
Yes, Play Keyboards stated this during the IC. The Bluetooth pcb doesn’t have the elevated led strip but the wired one does!
Post by: Vizir on Mon, 22 October 2018, 11:38:43
I've heard a couple comments while watching build streams that the V2 CA66 is going to have the light strip elevated to help stop the light bleed into the surrounding keys. I can't find documentation of this anywhere; is it true?
Yes, Play Keyboards stated this during the IC. The Bluetooth pcb doesn’t have the elevated led strip but the wired one does!
Post by: PM_Your_Switches on Mon, 22 October 2018, 12:03:00
I've heard a couple comments while watching build streams that the V2 CA66 is going to have the light strip elevated to help stop the light bleed into the surrounding keys. I can't find documentation of this anywhere; is it true?
Yes, Play Keyboards stated this during the IC. The Bluetooth pcb doesn’t have the elevated led strip but the wired one does!
Thank you for the info! I went through the IC briefly when I joined the GB, but I must have missed that.
I'm super excited for this kit. I have a custom cable ready, Modern Dolch arrives around the same time, modded jailhouse green switches with gold 50g springs ready to go, and I built a pc to match everything.
Post by: ZyBeR on Mon, 22 October 2018, 17:22:53
So the BT pcb will leak light compared to the non bt-pcb?I've heard a couple comments while watching build streams that the V2 CA66 is going to have the light strip elevated to help stop the light bleed into the surrounding keys. I can't find documentation of this anywhere; is it true?
Yes, Play Keyboards stated this during the IC. The Bluetooth pcb doesn’t have the elevated led strip but the wired one does!
Is there any pictures that show how big the difference is?
Post by: cijanzen on Mon, 22 October 2018, 17:32:24
So the BT pcb will leak light compared to the non bt-pcb?I've heard a couple comments while watching build streams that the V2 CA66 is going to have the light strip elevated to help stop the light bleed into the surrounding keys. I can't find documentation of this anywhere; is it true?
Yes, Play Keyboards stated this during the IC. The Bluetooth pcb doesn’t have the elevated led strip but the wired one does!
Is there any pictures that show how big the difference is?
There aren’t any photos at this time that I’m aware of. But that is correct. From the photos I’ve seen the light leak is pretty minimal and can be blocked if you feel so inclined. 001anthony did a build stream where he made a “light wall” to prevent light bleed using some foam.
Post by: lazyfart on Tue, 23 October 2018, 02:12:35
Planning to sell my spot if anyone's interested. Possibly a change of plan on my side. BT Pcb, alu plate, white case color, HHKB layout. Dm me!
pm
Post by: PlayKeyboardTW on Thu, 08 November 2018, 05:43:00
CNC is 50% done.
We are kind of busy at the moment for multiple things coming up.
Sorry for the late reply if we can't do it on time. :)
Post by: opioid on Fri, 09 November 2018, 22:43:57
Post by: V. Vega on Sat, 10 November 2018, 20:35:53
Though if anyone decides they'd rather not keep their dark grey hhkb spot, I'd be happy to buy it :D
Post by: jrfhoutx on Sun, 11 November 2018, 13:58:56
Post by: krey on Mon, 12 November 2018, 02:18:26
Post by: xoxox1029 on Mon, 12 November 2018, 21:36:08
Post by: factoryofidols on Tue, 13 November 2018, 00:45:29
Post by: LevelSteam on Tue, 13 November 2018, 22:17:34
Post by: Lyle88 on Wed, 14 November 2018, 00:26:42
i am looking for extra kits :(PCBs and plates or case?
Sent from my Pixel XL using Tapatalk
Post by: coffeeshopcoder on Wed, 14 November 2018, 00:31:03
Post by: Lyle88 on Wed, 14 November 2018, 00:50:01
looking for an extra PCB and alps plate here too...I didn't get any Alps plates but depending on which one I decide to keep (bt/wired) I will probably have a spare PCB and plate to let go.
Sent from my Pixel XL using Tapatalk
Post by: Vizir on Wed, 14 November 2018, 08:14:15
looking for an extra PCB and alps plate here too...I didn't get any Alps plates but depending on which one I decide to keep (bt/wired) I will probably have a spare PCB and plate to let go.
Sent from my Pixel XL using Tapatalk
Pretty sure the BT pcb model is Alps compatible and I think the plates are too
Post by: jrfhoutx on Wed, 14 November 2018, 10:50:31
looking for an extra PCB and alps plate here too...I didn't get any Alps plates but depending on which one I decide to keep (bt/wired) I will probably have a spare PCB and plate to let go.
Sent from my Pixel XL using Tapatalk
Pretty sure the BT pcb model is Alps compatible and I think the plates are too
Huh, I could've sworn it was the stock PCB that was Alps compatible, guess I was wrong. Going to be looking for a second BT PCB now, I guess.
If the plates weren't Alps or MX specific, why would an Alps plate have been an option? And why would both an MX and an Alps plate been shown as separate in the OP?
Post by: Vizir on Wed, 14 November 2018, 11:04:17
****. I guess I am looking for a Alps plate. If anyone has a spare or wants to sell, please pm me. Thanks. I am open to trade a brass plate for your alu alps plate.looking for an extra PCB and alps plate here too...I didn't get any Alps plates but depending on which one I decide to keep (bt/wired) I will probably have a spare PCB and plate to let go.
Sent from my Pixel XL using Tapatalk
Pretty sure the BT pcb model is Alps compatible and I think the plates are too
Huh, I could've sworn it was the stock PCB that was Alps compatible, guess I was wrong. Going to be looking for a second BT PCB now, I guess.
If the plates weren't Alps or MX specific, why would an Alps plate have been an option? And why would both an MX and an Alps plate been shown as separate in the OP?
Post by: mute on Tue, 20 November 2018, 14:52:06
Post by: soakedcardinal on Mon, 26 November 2018, 12:25:58
So, has anyone bought their battery yet? I'm hoping to not have to solder one in case the battery goes bad. Any suggestions?
I was planning on ordering one after I get dimensions of the available space . . I'm guessing you should be able to fit upwards of 3000 mAh using a long flat rectangular cell.
But I'm not positive how the circuit works. USB charging when plugged in, but how much current? - is the charging circuit specific for LiPo chemistry? (3.6-4.2V)
I would like to use a Li-Ion cell (3.2-4.2V) as that would make overcharging/overdischarging a lot less explosive (did I hear correctly that the LED bar does voltage monitoring?) and also fit a couple more mAh.
For connecting, it should be up to your preference . . I will probably use a connector though.
Post by: jrfhoutx on Mon, 26 November 2018, 23:21:56
So, has anyone bought their battery yet? I'm hoping to not have to solder one in case the battery goes bad. Any suggestions?
I was planning on ordering one after I get dimensions of the available space . . I'm guessing you should be able to fit upwards of 3000 mAh using a long flat rectangular cell.
But I'm not positive how the circuit works. USB charging when plugged in, but how much current? - is the charging circuit specific for LiPo chemistry? (3.6-4.2V)
I would like to use a Li-Ion cell (3.2-4.2V) as that would make overcharging/overdischarging a lot less explosive (did I hear correctly that the LED bar does voltage monitoring?) and also fit a couple more mAh.
For connecting, it should be up to your preference . . I will probably use a connector though.
Yes, you can probably fit just about any single cell 3000mah lipo, theres a lot of room inside the case.
IDK about the charging circuit, but i would imagine you could easily use li-Ion cells instead, they have the same nominal voltage as a single lipo cell. might be hard to find a cell with a small enough diameter to fit in the case though. idk if an18 series would fit, but you might be able to fit a 14 series an just parallel a couple cells...
Post by: cijanzen on Tue, 27 November 2018, 13:47:47
So, has anyone bought their battery yet? I'm hoping to not have to solder one in case the battery goes bad. Any suggestions?
I was planning on ordering one after I get dimensions of the available space . . I'm guessing you should be able to fit upwards of 3000 mAh using a long flat rectangular cell.
But I'm not positive how the circuit works. USB charging when plugged in, but how much current? - is the charging circuit specific for LiPo chemistry? (3.6-4.2V)
I would like to use a Li-Ion cell (3.2-4.2V) as that would make overcharging/overdischarging a lot less explosive (did I hear correctly that the LED bar does voltage monitoring?) and also fit a couple more mAh.
For connecting, it should be up to your preference . . I will probably use a connector though.
See this message from earlier:
I apologize if this has been answered before, but will it be possible to git an alps plate in place of the default plate at no extra cost? I don't need two :thumb:
Thanks
Sorry to say no. :-XWould this battery: https://m.aliexpress.com/item/32820875729.html?pid=808_0000_0101&spm=a2g0n.search-amp.list.32820875729&aff_trace_key=6a61fd7838f946c4bc418407ca8645d1-1495827122980-06676-F233fuf&aff_short_key=F233fuf&aff_platform=msite (https://m.aliexpress.com/item/32820875729.html?pid=808_0000_0101&spm=a2g0n.search-amp.list.32820875729&aff_trace_key=6a61fd7838f946c4bc418407ca8645d1-1495827122980-06676-F233fuf&aff_short_key=F233fuf&aff_platform=msite) work and do I need anything else like a connector? If I need a connector what should I look for?
You'll need a connector if you want to plug in/out easily. The size will be 1.25mm, 2 pin.
Or you can just remove the receptacle on PCB and solder wires in holes instead.When ordering spare parts how would we select colors for aluminum plates (both regular and alps)? There isn’t an option to select plate colors. Should we make a note somewhere?
We already realized we missed the color choosing parts for both plates.
It's a bit complicate for setting up the page and we don't think change it during GB period is a good idea.
So we'll send emails to order owners for checking everyone's choice of colors.
Sorry for causing any inconvenience. :(
Post by: cijanzen on Tue, 27 November 2018, 13:50:40
Post by: mute on Wed, 28 November 2018, 13:20:49
https://www.amazon.com/uxcell%C2%AE-2500mAh-Rechargeable-Lithium-Polymer/dp/B0798K2Y8F/ref=sr_1_14_a_it?ie=UTF8&qid=1543431186&sr=8-14&keywords=3.7v+jst+1.5mm
There're larger ones, but I'm a little worried about it fitting:
https://www.amazon.com/uxcell%C2%AE-3000mAh-Rechargeable-Lithium-Polymer/dp/B0798D2DDJ/ref=sr_1_1_a_it?ie=UTF8&qid=1543431953&sr=8-1&keywords=3.7v+jst+1.5mm+3000mAh
The image from the IC post looks like the measurements are somewhere around 150mm x 50mm. Still not sure on the depth though.
Post by: jrfhoutx on Wed, 28 November 2018, 21:08:10
Alright, thanks for the help. I actually just found one with the connector included:
https://www.amazon.com/uxcell%C2%AE-2500mAh-Rechargeable-Lithium-Polymer/dp/B0798K2Y8F/ref=sr_1_14_a_it?ie=UTF8&qid=1543431186&sr=8-14&keywords=3.7v+jst+1.5mm
There're larger ones, but I'm a little worried about it fitting:
https://www.amazon.com/uxcell%C2%AE-3000mAh-Rechargeable-Lithium-Polymer/dp/B0798D2DDJ/ref=sr_1_1_a_it?ie=UTF8&qid=1543431953&sr=8-1&keywords=3.7v+jst+1.5mm+3000mAh
The image from the IC post looks like the measurements are somewhere around 150mm x 50mm. Still not sure on the depth though.
There should be enough room for either of those batteries. I just took some rough measurements with a ruler, but either one should fit. The only thing I would be concerned with would be the switch pins.
Since you wouldn’t want them to puncture the battery, personally I would find the optimal location for the battery, mark it out on the board, and then of the switches that would be under the battery, I would clip the pins of those switches level with the pcb before soldering them, then use double sided tape to attach the batter to the bottom plate so it stays in place.
Post by: cijanzen on Fri, 30 November 2018, 11:58:29
Post by: upintheclouds on Fri, 30 November 2018, 13:22:16
Alright, thanks for the help. I actually just found one with the connector included:
https://www.amazon.com/uxcell%C2%AE-2500mAh-Rechargeable-Lithium-Polymer/dp/B0798K2Y8F/ref=sr_1_14_a_it?ie=UTF8&qid=1543431186&sr=8-14&keywords=3.7v+jst+1.5mm
There're larger ones, but I'm a little worried about it fitting:
https://www.amazon.com/uxcell%C2%AE-3000mAh-Rechargeable-Lithium-Polymer/dp/B0798D2DDJ/ref=sr_1_1_a_it?ie=UTF8&qid=1543431953&sr=8-1&keywords=3.7v+jst+1.5mm+3000mAh
The image from the IC post looks like the measurements are somewhere around 150mm x 50mm. Still not sure on the depth though.
There should be enough room for either of those batteries. I just took some rough measurements with a ruler, but either one should fit. The only thing I would be concerned with would be the switch pins.
Since you wouldn’t want them to puncture the battery, personally I would find the optimal location for the battery, mark it out on the board, and then of the switches that would be under the battery, I would clip the pins of those switches level with the pcb before soldering them, then use double sided tape to attach the batter to the bottom plate so it stays in place.
I used this rubber sheet https://www.amazon.com/gp/product/B06WCZD1LZ (https://www.amazon.com/gp/product/B06WCZD1LZ) under the PCB for a tray-mounted wood case where I carved out a space for the battery. I didn't 100% finish the build (screw issues compounded, but I digress), but this appeared to keep the pointy ends of the switches from puncturing the battery without having to clip them.
Post by: jrfhoutx on Fri, 30 November 2018, 17:43:32
To each their own, and everyone can do it as they please; but that’s how I would personally do it, just to ensure that everything was as safe as possible for my build. Last thing I want is a flaming CA66.
Post by: Vizir on Fri, 30 November 2018, 20:00:54
Post by: dondongler on Mon, 03 December 2018, 15:57:52
Post by: DJ Shoko on Tue, 04 December 2018, 01:26:26
Post by: Emir on Tue, 04 December 2018, 01:32:38
Post by: Lyle88 on Tue, 04 December 2018, 01:58:44
We need a round 3, so sad I missed out. :(According to OP there won't be one, but there are regularly ones that are for sale on r/mechmarket
Sent from my Pixel XL using Tapatalk
Post by: upintheclouds on Fri, 07 December 2018, 12:18:27
This still shipping in a week? Lol
Also wondering this. Is CNC still just at 50%? Are we getting these in December?
Post by: DoCallMeKing on Fri, 07 December 2018, 20:25:43
Really hope they finish up and get sent.
Post by: PlayKeyboardTW on Sat, 08 December 2018, 10:59:58
This round wasn't as smooth as last one. We spent some time dealing with them.
Photos will be updated and posted in here like last time to let you guys know what's happening. :thumb:
Post by: Photoelectric on Sat, 08 December 2018, 11:41:33
Hi guys. We just finished CNC process, and ready to move to anodizing phase.
This round wasn't as smooth as last one. We spent some time dealing with them.
Photos will be updated and posted in here like last time to let you guys know what's happening. :thumb:
Looking forward to photos of the progress--those are always fun. Do you mean "not as smooth" as in there were issues with QC? Hopefully that's sorted.
Post by: cijanzen on Sat, 08 December 2018, 11:46:27
Hi guys. We just finished CNC process, and ready to move to anodizing phase.
This round wasn't as smooth as last one. We spent some time dealing with them.
Photos will be updated and posted in here like last time to let you guys know what's happening. :thumb:
Looking forward to photos of the progress--those are always fun. Do you mean "not as smooth" as in there were issues with QC? Hopefully that's sorted.
Pretty sure it’s meant as the process wasn’t as smooth as last time. There was the typhoon which slowed things down and the fact that they’re working on doppio TKL at the same time.
Post by: coffeeshopcoder on Mon, 10 December 2018, 12:41:53
Post by: tex_live_utility on Tue, 11 December 2018, 14:11:31
Post by: fer.real on Tue, 11 December 2018, 16:32:15
Sorry if I missed it, but are the plate files available anywhere? I'm thinking about getting one of these: https://geekhack.org/index.php?topic=98567.0
They're in the OP. https://goo.gl/DXNwqL (https://goo.gl/DXNwqL)
I also want a titanium plate to match the titanium badge.
Post by: spooknik on Sun, 16 December 2018, 03:18:11
Post by: Jaxxstatic on Mon, 17 December 2018, 16:52:44
So far I have wasted a bunch of money and time on a non-functioning, pretty brick.
Post by: Shell058 on Tue, 18 December 2018, 02:51:48
TWO round 1 PCBs have crapped out on me now. Have these issues been addressed at all for the round 2 PCBs? If so, I'll try to buy one aftermarket. If not, I hope people with Round 2 spots don't experience this same issue.
So far I have wasted a bunch of money and time on a non-functioning, pretty brick.
I had the same issues, two round one PCBs that eventually died. Messaged PlayKeyboardTW about it and he said they found the problem and have fixed it for round 2. I'd message him about your issues, he was very responsive and is including a replacement in my R2 order and may be able to help you out.
Post by: Jaxxstatic on Tue, 18 December 2018, 09:43:25
I'll do that. Thanks for the suggestion.TWO round 1 PCBs have crapped out on me now. Have these issues been addressed at all for the round 2 PCBs? If so, I'll try to buy one aftermarket. If not, I hope people with Round 2 spots don't experience this same issue.
So far I have wasted a bunch of money and time on a non-functioning, pretty brick.
I had the same issues, two round one PCBs that eventually died. Messaged PlayKeyboardTW about it and he said they found the problem and have fixed it for round 2. I'd message him about your issues, he was very responsive and is including a replacement in my R2 order and may be able to help you out.
I bought all my CA66 stuff aftermarket, though, so I don't expect that they're obliged to do anything.
Post by: beerafffe1 on Tue, 18 December 2018, 18:56:15
Sent from my SM-G950U using Tapatalk
Post by: PlayKeyboardTW on Sun, 23 December 2018, 02:54:06
[attach=1][attach=2]
[attach=3][attach=4]
We made 4 keys on the right side, and WKL left Control positions hot-swappable for you guys to play with.
Some SMD white LED will also be provided as well for all of you.
Case photos update will come soon. :thumb:
Post by: Lyle88 on Sun, 23 December 2018, 03:23:38
(https://uploads.tapatalk-cdn.com/20181223/38e414e0c8bb5a8df9d19b80ac0ab2c4.jpg)(https://uploads.tapatalk-cdn.com/20181223/dc2f95da70112a83468062cef47d156d.jpg)Sent from my Pixel XL using Tapatalk
Post by: fer.real on Sun, 23 December 2018, 05:19:38
Default PCB updates here. We put some tricks in it. ;)
(Attachment Link) (Attachment Link)
(Attachment Link) (Attachment Link)
We made 4 keys on the right side, and WKL left Control positions hot-swappable for you guys to play with.
Some SMD white LED will also be provided as well for all of you.
Case photos update will come soon. :thumb:
Very exciting additions!
Post by: coffeeshopcoder on Thu, 27 December 2018, 00:06:24
Post by: parityb1t on Thu, 27 December 2018, 07:57:02
Default PCB updates here. We put some tricks in it. ;)
(Attachment Link) (Attachment Link)
(Attachment Link) (Attachment Link)
We made 4 keys on the right side, and WKL left Control positions hot-swappable for you guys to play with.
Some SMD white LED will also be provided as well for all of you.
Case photos update will come soon. :thumb:
woo, nice. thanks for the nice surprise :)
Post by: teh_pengers on Sat, 05 January 2019, 21:17:48
Thanks!
Post by: blizzara01 on Sat, 05 January 2019, 21:29:25
Post by: jrfhoutx on Sun, 06 January 2019, 09:28:15
Sounds like the cases might be done soonish. Is there a new ship date estimate?
Thanks!
Yeah, hoping this finishes up before CNY...
Post by: dondongler on Sun, 06 January 2019, 11:17:48
Post by: DoCallMeKing on Sun, 06 January 2019, 22:02:28
Also, is there a way to purchase them right now or is just wait until they are stocked on the play keyboard website?
Thanks all.
Post by: jrfhoutx on Mon, 07 January 2019, 00:15:55
Post by: DoCallMeKing on Mon, 07 January 2019, 08:35:11
Thanks a lot mate.
Post by: PlayKeyboardTW on Wed, 09 January 2019, 00:15:55
We are now in anodizing phase. And we've got some extra WKL version (no HHKB version) CA66 available for purchasing if someone missed the GB.
You can choose the color yourself as well.
The deadline is on 12th, Saturday.
Please contact us via -
Store: https://play-keyboard.store/
Mail: yj7272098@hotmail.com
Thanks!
Post by: pixelpusher on Wed, 09 January 2019, 00:57:40
Hi guys,
We are now in anodizing phase. And we've got some extra WKL version (no HHKB version) CA66 available for purchasing if someone missed the GB.
You can choose the color yourself as well.
The deadline is on 12th, Saturday.
Please contact us via -
Store: https://play-keyboard.store/
Mail: yj7272098@hotmail.com
Thanks!
Okay, so if I want a white or dark gray winkeyless board I just send it through email?
Post by: PlayKeyboardTW on Wed, 09 January 2019, 03:13:44
Hi guys,
We are now in anodizing phase. And we've got some extra WKL version (no HHKB version) CA66 available for purchasing if someone missed the GB.
You can choose the color yourself as well.
The deadline is on 12th, Saturday.
Please contact us via -
Store: https://play-keyboard.store/
Mail: yj7272098@hotmail.com
Thanks!
Okay, so if I want a white or dark gray winkeyless board I just send it through email?
Yes please :thumb:
Post by: 5inn3d- on Wed, 09 January 2019, 03:27:35
Hi guys,
We are now in anodizing phase. And we've got some extra WKL version (no HHKB version) CA66 available for purchasing if someone missed the GB.
You can choose the color yourself as well.
The deadline is on 12th, Saturday.
Please contact us via -
Store: https://play-keyboard.store/
Mail: yj7272098@hotmail.com
Thanks!
email sent!
Post by: JohnWest on Wed, 09 January 2019, 08:02:28
Hi guys,
We are now in anodizing phase. And we've got some extra WKL version (no HHKB version) CA66 available for purchasing if someone missed the GB.
You can choose the color yourself as well.
The deadline is on 12th, Saturday.
Please contact us via -
Store: https://play-keyboard.store/
Mail: yj7272098@hotmail.com
Thanks!
Do you also have any extra brass plates or PCBs available?
Post by: dondongler on Wed, 09 January 2019, 08:16:04
Hi guys,
We are now in anodizing phase. And we've got some extra WKL version (no HHKB version) CA66 available for purchasing if someone missed the GB.
You can choose the color yourself as well.
The deadline is on 12th, Saturday.
Please contact us via -
Store: https://play-keyboard.store/
Mail: yj7272098@hotmail.com
Thanks!
Any estimate on the new shipping time?
Post by: V. Vega on Wed, 09 January 2019, 08:16:17
Hi guys,
We are now in anodizing phase. And we've got some extra WKL version (no HHKB version) CA66 available for purchasing if someone missed the GB.
You can choose the color yourself as well.
The deadline is on 12th, Saturday.
Please contact us via -
Store: https://play-keyboard.store/
Mail: yj7272098@hotmail.com
Thanks!
Do you also have any extra brass plates or PCBs available?
Would like to know this also.
Post by: Vizir on Wed, 09 January 2019, 08:30:04
I'm looking for an Alps plate, if there are extras.Hi guys,
We are now in anodizing phase. And we've got some extra WKL version (no HHKB version) CA66 available for purchasing if someone missed the GB.
You can choose the color yourself as well.
The deadline is on 12th, Saturday.
Please contact us via -
Store: https://play-keyboard.store/
Mail: yj7272098@hotmail.com
Thanks!
Do you also have any extra brass plates or PCBs available?
Would like to know this also.
Post by: PlayKeyboardTW on Wed, 09 January 2019, 22:08:39
Hi guys,
We are now in anodizing phase. And we've got some extra WKL version (no HHKB version) CA66 available for purchasing if someone missed the GB.
You can choose the color yourself as well.
The deadline is on 12th, Saturday.
Please contact us via -
Store: https://play-keyboard.store/
Mail: yj7272098@hotmail.com
Thanks!
Any estimate on the new shipping time?
The anodizing is expected to be finished around 15th to 20th.
We are catching up to ship all stuffs out before Chinese New Year. :thumb:
Hi guys,
We are now in anodizing phase. And we've got some extra WKL version (no HHKB version) CA66 available for purchasing if someone missed the GB.
You can choose the color yourself as well.
The deadline is on 12th, Saturday.
Please contact us via -
Store: https://play-keyboard.store/
Mail: yj7272098@hotmail.com
Thanks!
Do you also have any extra brass plates or PCBs available?
No extra parts available before all GB orders are out. We will put them in the site after every GB participants get there items.
Post by: Lyle88 on Wed, 09 January 2019, 22:33:43
Do you mean finished 15-20th of January?Hi guys,
We are now in anodizing phase. And we've got some extra WKL version (no HHKB version) CA66 available for purchasing if someone missed the GB.
You can choose the color yourself as well.
The deadline is on 12th, Saturday.
Please contact us via -
Store: https://play-keyboard.store/
Mail: yj7272098@hotmail.com
Thanks!
Any estimate on the new shipping time?
The anodizing is expected to be finished around 15th to 20th.
We are catching up to ship all stuffs out before Chinese New Year. :thumb:Hi guys,
We are now in anodizing phase. And we've got some extra WKL version (no HHKB version) CA66 available for purchasing if someone missed the GB.
You can choose the color yourself as well.
The deadline is on 12th, Saturday.
Please contact us via -
Store: https://play-keyboard.store/
Mail: yj7272098@hotmail.com
Thanks!
Do you also have any extra brass plates or PCBs available?
No extra parts available before all GB orders are out. We will put them in the site after every GB participants get there items.
Sent from my Pixel XL using Tapatalk
Post by: PlayKeyboardTW on Sat, 12 January 2019, 06:36:03
Do you mean finished 15-20th of January?Hi guys,
We are now in anodizing phase. And we've got some extra WKL version (no HHKB version) CA66 available for purchasing if someone missed the GB.
You can choose the color yourself as well.
The deadline is on 12th, Saturday.
Please contact us via -
Store: https://play-keyboard.store/
Mail: yj7272098@hotmail.com
Thanks!
Any estimate on the new shipping time?
The anodizing is expected to be finished around 15th to 20th.
We are catching up to ship all stuffs out before Chinese New Year. :thumb:Hi guys,
We are now in anodizing phase. And we've got some extra WKL version (no HHKB version) CA66 available for purchasing if someone missed the GB.
You can choose the color yourself as well.
The deadline is on 12th, Saturday.
Please contact us via -
Store: https://play-keyboard.store/
Mail: yj7272098@hotmail.com
Thanks!
Do you also have any extra brass plates or PCBs available?
No extra parts available before all GB orders are out. We will put them in the site after every GB participants get there items.
Sent from my Pixel XL using Tapatalk
Yes :thumb: Working hard to meet the time.
Post by: PlayKeyboardTW on Sat, 12 January 2019, 06:37:55
[attach=1][attach=2]
Post by: cijanzen on Sat, 12 January 2019, 07:55:30
Some pics to show. Will keep updating. :thumb:
(Attachment Link) (Attachment Link)
These are looking great! Thanks for sharing.
Post by: Ephemeral on Sat, 12 January 2019, 09:09:49
Some pics to show. Will keep updating. :thumb:
(Attachment Link) (Attachment Link)
Hyped.
Post by: teh_pengers on Sat, 12 January 2019, 12:58:49
Some pics to show. Will keep updating. :thumb:
(Attachment Link) (Attachment Link)
Kinda wishing I went for what looks like dark red :eek:
Post by: Vizir on Sat, 12 January 2019, 12:59:52
I know! That color looks so good!Some pics to show. Will keep updating. :thumb:
(Attachment Link) (Attachment Link)
Kinda wishing I went for what looks like dark red :eek:
Post by: theo313 on Sat, 12 January 2019, 23:52:37
Post by: theo313 on Sun, 13 January 2019, 01:23:12
Post by: jrfhoutx on Sun, 13 January 2019, 13:22:20
I understand if you customized the PCB in some way to make it possible for those 4 keys, but would I be able to add Kailh style hot swap sockets to rest of the board? Is it compatible?
No. The Kailh hotswap sockets require a special footprint with pads and cutouts in different places than a regular cherry footprint. If it's not there from the start it's not possible to add them later.
Post by: PlayKeyboardTW on Mon, 14 January 2019, 01:26:06
I understand if you customized the PCB in some way to make it possible for those 4 keys, but would I be able to add Kailh style hot swap sockets to rest of the board? Is it compatible?
No. The Kailh hotswap sockets require a special footprint with pads and cutouts in different places than a regular cherry footprint. If it's not there from the start it's not possible to add them later.
Thanks for answering. :thumb:
And it also means that you will need to limit the PCB into one layout only.
Does anyone know if there is a profile for the CA66 on QMK configurator? I couldn't seem to find one. Edit: Never mind I found it under PlayKeyboardCa66 or something like that.
We also made a change for this on PCB. Wait us to show it. ;)
Post by: PlayKeyboardTW on Mon, 14 January 2019, 01:31:38
As Chinese New Year is approaching. There are many vendors of other industries trying to finish their stuffs before Chinese New Year as we do.
So it's quite a mess in the factory right now.
By estimating the situation, we might able to finish all the works before the date.
But won't have time to do the packing after Chinese New Year holidays. :(
We sincerely apologize for this, and will be heading back to work as soon as holidays are over.
Thanks for understanding of all of you. :)
Post by: cijanzen on Mon, 14 January 2019, 07:40:31
Hi guys.
As Chinese New Year is approaching. There are many vendors of other industries trying to finish their stuffs before Chinese New Year as we do.
So it's quite a mess in the factory right now.
By estimating the situation, we might able to finish all the works before the date.
But won't have time to do the packing after Chinese New Year holidays. :(
We sincerely apologize for this, and will be heading back to work as soon as holidays are over.
Thanks for understanding of all of you. :)
Well it’s a bummer to hear but I appreciate the transparency and your realistic outlook. If by some miracle it wraps up before then well great. Otherwise, hope you enjoy the holiday and we’ll hear from you in the Chinese New Year!
Post by: nill on Mon, 21 January 2019, 16:58:07
I just got a CA66 from Round 1, and I fear the PCB may have bricked after only a few days of use...
@PlayKeyboard, since I know this was a recurring issue with Round1, did you find a solution? Are these issues fixed for Round 2?
See people discussing R1 issues here, on the last page : https://geekhack.org/index.php?topic=93542.900
Are there any extra PCBs from Round 2 I might purchase privately to replace the dead one?
This is really disappointing to me, as the CA66 is (was) my endgame, and it died after barely a few hours of use....
I'm looking forward to hearing from you on this issue.
Post by: cijanzen on Thu, 24 January 2019, 16:00:54
Post by: Lvlc on Sun, 27 January 2019, 16:01:25
Hi!
I just got a CA66 from Round 1, and I fear the PCB may have bricked after only a few days of use...
@PlayKeyboard, since I know this was a recurring issue with Round1, did you find a solution? Are these issues fixed for Round 2?
See people discussing R1 issues here, on the last page : https://geekhack.org/index.php?topic=93542.900
Are there any extra PCBs from Round 2 I might purchase privately to replace the dead one?
This is really disappointing to me, as the CA66 is (was) my endgame, and it died after barely a few hours of use....
I'm looking forward to hearing from you on this issue.
+1 for the pcb issues. 4 keys on the right stopped working along with some other on the top row. It was fine for over 4 months, which is why i'm surprised.
I purchased a BT PCB, but I can't be in doubt if it still has the same issues.
Post by: Vizir on Sun, 27 January 2019, 16:05:15
Post by: Prebeta on Sun, 27 January 2019, 16:37:42
Post by: theo313 on Sun, 27 January 2019, 23:17:56
Hi!
I just got a CA66 from Round 1, and I fear the PCB may have bricked after only a few days of use...
@PlayKeyboard, since I know this was a recurring issue with Round1, did you find a solution? Are these issues fixed for Round 2?
See people discussing R1 issues here, on the last page : https://geekhack.org/index.php?topic=93542.900
Are there any extra PCBs from Round 2 I might purchase privately to replace the dead one?
This is really disappointing to me, as the CA66 is (was) my endgame, and it died after barely a few hours of use....
I'm looking forward to hearing from you on this issue.
+1 for the pcb issues. 4 keys on the right stopped working along with some other on the top row. It was fine for over 4 months, which is why i'm surprised.
I purchased a BT PCB, but I can't be in doubt if it still has the same issues.
Have you tried bridging the switches at all?
Post by: theo313 on Tue, 29 January 2019, 10:50:25
Post by: cijanzen on Tue, 29 January 2019, 11:27:17
Is the PCB compatible with screw in Stabilizers?
Yes
Post by: Fatboychard on Wed, 06 February 2019, 09:52:51
CA66 HHKB Dark Red + Brass Plate
SOLD
Post by: kitty on Wed, 13 February 2019, 01:39:24
Post by: PlayKeyboardTW on Fri, 15 February 2019, 07:49:55
BT PCB done.
We will be back to the factory to finish the rest of anodizing stuff on 20th. :thumb:
Post by: PlayKeyboardTW on Fri, 15 February 2019, 07:50:33
is there a chance to add extras to our GB order before it ships? wanna get my hands on a brass plate
No sorry. Manufacturing was all done. :-X
Post by: cijanzen on Fri, 15 February 2019, 07:51:40
(Attachment Link) (Attachment Link)
BT PCB done.
We will be back to the factory to finish the rest of anodizing stuff on 20th. :thumb:
Awesome! Thank you for updating and enjoy the rest of CNY celebrations!
Post by: kf1246 on Fri, 15 February 2019, 08:19:35
Edit: just noticed there’s no USB connector on the PCB. Is that added later?
If I recall correctly, the USB port is on a daughterboard mounted separately in the case. You might be able to find pictures of this from the previous GB.
Post by: cijanzen on Fri, 15 February 2019, 08:22:21
Edit: just noticed there’s no USB connector on the PCB. Is that added later?
If I recall correctly, the USB port is on a daughterboard mounted separately in the case. You might be able to find pictures of this from the previous GB.
Oh geez I totally forgot about that! Thanks for the reminder.
Post by: Cods on Fri, 15 February 2019, 18:24:51
Post by: lakeboredom on Sat, 16 February 2019, 01:09:53
Post by: Lyle88 on Sat, 16 February 2019, 01:26:57
Is there anything I can do to prevent my R1 PCB from dying? Kind of hesitant to build it without knowing the problem.I'm also curious as to whether the issue has been isolated and changes have been made to the R2 PCB..
Sent from my Pixel XL using Tapatalk
Post by: jrfhoutx on Sat, 16 February 2019, 06:18:01
Is there anything I can do to prevent my R1 PCB from dying? Kind of hesitant to build it without knowing the problem.I'm also curious as to whether the issue has been isolated and changes have been made to the R2 PCB..
Sent from my Pixel XL using Tapatalk
They’ve said they found the problem and have corrected it in the R2 pcbs, but haven’t said what the problem actually was.
Post by: nulltorious on Sun, 17 February 2019, 08:15:30
Is it still possible to buy an extra ALPS plate? If not can you share the plate file and I can get it cut. I recently got some really clean Blue Alps and I think the CA66 will be a good board for the switches.
Post by: Vizir on Sun, 17 February 2019, 09:51:52
@PlayKeyboardTWI'd like this too since I forgot to order one
Is it still possible to buy an extra ALPS plate? If not can you share the plate file and I can get it cut. I recently got some really clean Blue Alps and I think the CA66 will be a good board for the switches.
Post by: jrfhoutx on Sun, 17 February 2019, 15:36:35
@PlayKeyboardTWI'd like this too since I forgot to order one
Is it still possible to buy an extra ALPS plate? If not can you share the plate file and I can get it cut. I recently got some really clean Blue Alps and I think the CA66 will be a good board for the switches.
They’ve said they’ll release the plate file after the completion of the buy, just like they did with round 1.
Post by: 8BitDuck on Wed, 20 February 2019, 04:29:25
Post by: Lyle88 on Wed, 20 February 2019, 06:34:59
Does anyone know if there will be any spares available?There are WKL kits available, unless the extras all sold...
Sent from my Pixel XL using Tapatalk
Post by: Lyle88 on Mon, 25 February 2019, 20:13:48
Sent from my Pixel XL using Tapatalk
Post by: silversung on Mon, 25 February 2019, 20:22:45
Post by: Lormania on Mon, 25 February 2019, 20:45:53
Post by: dondongler on Mon, 25 February 2019, 20:56:48
I am not sure how long anodizing takes but if they stsrted doing that on the 20th then I imagine it takes a couple weeks at most to do that. Then it needs to be shipped after QC so I am thinking another 3 - 4 weeks until it is our hands? Does that sound right?I was under the impression ano was almost completed before cny. Could be mistaken though.
Sent from my SM-G930T using Tapatalk
Post by: Lormania on Mon, 25 February 2019, 21:12:14
I am not sure how long anodizing takes but if they stsrted doing that on the 20th then I imagine it takes a couple weeks at most to do that. Then it needs to be shipped after QC so I am thinking another 3 - 4 weeks until it is our hands? Does that sound right?I was under the impression ano was almost completed before cny. Could be mistaken though.
Sent from my SM-G930T using Tapatalk
Ah yes, he did say they were finishing up the ano after the 20th. Hope that means only 3 weeks.
Post by: ctrl on Tue, 26 February 2019, 06:14:54
Is there anything I can do to prevent my R1 PCB from dying? Kind of hesitant to build it without knowing the problem.I'm also curious as to whether the issue has been isolated and changes have been made to the R2 PCB..
Sent from my Pixel XL using Tapatalk
They’ve said they found the problem and have corrected it in the R2 pcbs, but haven’t said what the problem actually was.
I'm waiting for the new PCB, but in the meantime I've got two unbuilt PCBs gathering dust on the shelf only because I'm not sure wheher they'll be bricked just as many others. If the source of the problem is known, it really should be made public so, if possible, previous PCBs could be fixed before use.
Post by: lakeboredom on Tue, 26 February 2019, 13:40:57
Sent from my MotoG3 using Tapatalk
Post by: Sythe on Wed, 27 February 2019, 18:08:13
I would have expected these to be done by now or very close to being finished.
Post by: 4everJayWalking on Wed, 27 February 2019, 18:37:52
"Our guy just arrived at the factory today. More updates will come. Please don't be concerned. We rather make them good then sending out low quality stuffs"
I asked for an updated timeline but that's all I was given. Hopefully we'll hear something soon.
Post by: iEatPuppers on Thu, 28 February 2019, 05:35:06
"Hi there!
We were just back to the factory to take care the rest of the work
so we probably can ship orders out before March 15th."
Post by: Lyle88 on Thu, 28 February 2019, 06:18:04
I got the following response:Ohhhh
"Hi there!
We were just back to the factory to take care the rest of the work
so we probably can ship orders out before March 15th."
Sent from my Pixel XL using Tapatalk
Post by: theo313 on Thu, 28 February 2019, 09:51:12
Post by: 5inn3d- on Thu, 28 February 2019, 10:51:28
Post by: Vizir on Thu, 28 February 2019, 12:36:13
no idea how selling spots work.. but im trying to change my shipping address..That's easy. Send a PM with your new address and your order number to PlayKeyboardTW
Post by: 5inn3d- on Fri, 01 March 2019, 10:41:29
no idea how selling spots work.. but im trying to change my shipping address..That's easy. Send a PM with your new address and your order number to PlayKeyboardTW
I did, as well as an email. no response so far.
Post by: Vizir on Fri, 01 March 2019, 11:10:05
Ok. They should get back to you soon enough. Must stop be on vacationno idea how selling spots work.. but im trying to change my shipping address..That's easy. Send a PM with your new address and your order number to PlayKeyboardTW
I did, as well as an email. no response so far.
Post by: Sythe on Sun, 03 March 2019, 22:26:47
I got the following response:
"Hi there!
We were just back to the factory to take care the rest of the work
so we probably can ship orders out before March 15th."
Now for them to just update us here with that information...
Post by: PlayKeyboardTW on Fri, 08 March 2019, 20:55:49
Really sorry that we can't reply all messages back immediately.
This time was kind of different from last round (like there's a Chinese New Year holiday period in the middle). Some private issues we can't tell you guys as well.
There are some new projects on going and prototypes are done.
In conclusion, we tried to do to many things at the same time. :(
Lots of guys contacting us by emails and via Facebook messages.
We now only reply those who want to change shipping addresses, and asking for situations.
Since too many people ask if there's any extra kits for purchasing, we kinda want to handle all GB orders first.
And that will be fair enough for guys joined the GB from the very start.
As we found we were lacking of some HHKB-like version cases. We just finished their CNC process and are now polishing, sandblasting them.
Also packaging is arrived.
[attach=1]
As we heading back to anodizing to finish the rest of work, of course more pics you want to see will be posted here and instagram. :thumb:
Sorry and thanks for all the patience, support from all of you. ;D
Post by: cijanzen on Fri, 08 March 2019, 20:57:38
Hi guys! A quick updates here.
Really sorry that we can't reply all messages back immediately.
This time was kind of different from last round (like there's a Chinese New Year holiday period in the middle). Some private issues we can't tell you guys as well.
There are some new projects on going and prototypes are done.
In conclusion, we tried to do to many things at the same time. :(
Lots of guys contacting us by emails and via Facebook messages.
We now only reply those who want to change shipping addresses, and asking for situations.
Since too many people ask if there's any extra kits for purchasing, we kinda want to handle all GB orders first.
And that will be fair enough for guys joined the GB from the very start.
As we found we were lacking of some HHKB-like version cases. We just finished their CNC process and are now polishing, sandblasting them.
Also packaging is arrived.
(Attachment Link)
As we heading back to anodizing to finish the rest of work, of course more pics you want to see will be posted here and instagram. :thumb:
Sorry and thanks for all the patience, support from all of you. ;D
Thanks for the update! Anything, even some news of delay is better than no news so it’s very much appreciated. Thanks for your ongoing efforts to get this shipped!
Post by: oldcat on Fri, 08 March 2019, 21:26:56
Hi guys! A quick updates here.
Really sorry that we can't reply all messages back immediately.
This time was kind of different from last round (like there's a Chinese New Year holiday period in the middle). Some private issues we can't tell you guys as well.
There are some new projects on going and prototypes are done.
In conclusion, we tried to do to many things at the same time. :(
Lots of guys contacting us by emails and via Facebook messages.
We now only reply those who want to change shipping addresses, and asking for situations.
Since too many people ask if there's any extra kits for purchasing, we kinda want to handle all GB orders first.
And that will be fair enough for guys joined the GB from the very start.
As we found we were lacking of some HHKB-like version cases. We just finished their CNC process and are now polishing, sandblasting them.
Also packaging is arrived.
(Attachment Link)
As we heading back to anodizing to finish the rest of work, of course more pics you want to see will be posted here and instagram. :thumb:
Sorry and thanks for all the patience, support from all of you. ;D
Great!
Post by: Lyle88 on Fri, 08 March 2019, 21:43:55
Hi guys! A quick updates here.Thanks for the update! I'm really looking forward to seeing the white cases!
Really sorry that we can't reply all messages back immediately.
This time was kind of different from last round (like there's a Chinese New Year holiday period in the middle). Some private issues we can't tell you guys as well.
There are some new projects on going and prototypes are done.
In conclusion, we tried to do to many things at the same time. :(
Lots of guys contacting us by emails and via Facebook messages.
We now only reply those who want to change shipping addresses, and asking for situations.
Since too many people ask if there's any extra kits for purchasing, we kinda want to handle all GB orders first.
And that will be fair enough for guys joined the GB from the very start.
As we found we were lacking of some HHKB-like version cases. We just finished their CNC process and are now polishing, sandblasting them.
Also packaging is arrived.
(Attachment Link)
As we heading back to anodizing to finish the rest of work, of course more pics you want to see will be posted here and instagram. :thumb:
Sorry and thanks for all the patience, support from all of you. ;D
Sent from my Pixel XL using Tapatalk
Post by: Sythe on Fri, 08 March 2019, 22:43:29
What is the expected time until they will be ready to ship?
Post by: iEatPuppers on Wed, 13 March 2019, 21:44:00
Post by: PlayKeyboardTW on Thu, 14 March 2019, 22:42:52
Good to hear that. ;)
Post by: iEatPuppers on Thu, 14 March 2019, 23:25:48
Post by: Sythe on Fri, 15 March 2019, 00:23:36
Our mate there in the factory said that we can make it before the end of this month.
Good to hear that. ;)
Glad to finally get an update on the lead time.
Looking forward to the end of the month. :thumb:
Post by: DoCallMeKing on Fri, 15 March 2019, 05:13:00
I sold my slot a few months ago but after using other boards realized I'd love to get this board back.
Message me through here or reddit.
Thanks!
Post by: Jonathan0903 on Fri, 15 March 2019, 12:51:56
Does anyone have a slot they'd want to sell?
I sold my slot a few months ago but after using other boards realized I'd love to get this board back.
Message me through here or reddit.
Thanks!
OOF. Good luck my guy! I know this feeling all too well...
Post by: _Paco on Fri, 15 March 2019, 13:06:01
Would it be possible to bundle those extras to our GB order? I'd like an additional brass plate, but it seems silly to pay for shipping twice.
Post by: PlayKeyboardTW on Sat, 16 March 2019, 03:13:54
Then we will be all good to pack them.
[attach=1][attach=2]
We know all you guys would like to see how they look inside newspaper.
We will take some photos when they are ready to be shown later. :thumb:
Post by: PlayKeyboardTW on Sat, 16 March 2019, 03:15:17
It's been stated there will some extras after the GB order are sent out.
Would it be possible to bundle those extras to our GB order? I'd like an additional brass plate, but it seems silly to pay for shipping twice.
Please send me a message to see if we can work it out for you. ;)
Post by: cijanzen on Sat, 16 March 2019, 03:24:59
Most cases are done in the anodizing place. Now moves them back to the factory to install helicoil inserts.
Then we will be all good to pack them.
(Attachment Link) (Attachment Link)
We know all you guys would like to see how they look inside newspaper.
We will take some photos when they are ready to be shown later. :thumb:
love the newspaper! But more importantly glad to hear that things are moving along smoothly now. Can’t wait to get mine!Sent from my iPhone using Tapatalk
Post by: ricesteam on Sat, 16 March 2019, 09:14:33
Post by: Lyle88 on Sat, 16 March 2019, 09:44:20
If anyone is having second thoughts or want to sell their slot, please message me! Thanks :)Try PM'ing playkeyboard, there might be spare wkl cases after all the GB joiners stuff is sent
Sent from my Pixel XL using Tapatalk
Post by: jrfhoutx on Sat, 16 March 2019, 11:30:01
Most cases are done in the anodizing place. Now moves them back to the factory to install helicoil inserts.
Why are helicoil inserts being installed? are the threads not being cut into the aluminum?
Post by: Oatburner on Sat, 16 March 2019, 11:32:02
Most cases are done in the anodizing place. Now moves them back to the factory to install helicoil inserts.
Why are helicoil inserts being installed? are the threads not being cut into the aluminum?
Nope. It was like that for the first round, too. I imagine they're a lot more robust than just threading into the case.
Post by: jrfhoutx on Sat, 16 March 2019, 13:40:42
Most cases are done in the anodizing place. Now moves them back to the factory to install helicoil inserts.
Why are helicoil inserts being installed? are the threads not being cut into the aluminum?
Nope. It was like that for the first round, too. I imagine they're a lot more robust than just threading into the case.
Makes sense. I just took my R1 board apart, and yeah, I guess I didn't realize they used them in R1. TIL
Post by: warmaster on Sun, 17 March 2019, 06:18:37
Dark Grey HHKB with aluminium default PCB, just message me if interested.
Post by: ZyBeR on Sun, 17 March 2019, 07:48:07
Post by: Sintpinty on Sun, 17 March 2019, 07:55:56
Post by: liv05 on Mon, 18 March 2019, 02:41:24
Post by: ZyBeR on Mon, 18 March 2019, 02:51:04
Looking to sell my gb spot, dark red hhkb / bluetooth / gold alu & brass plate :)PM
Post by: omgkittiesyay on Mon, 18 March 2019, 20:08:03
Post by: Jonathan0903 on Tue, 19 March 2019, 16:29:19
Post by: Lyle88 on Tue, 19 March 2019, 16:40:36
Haven't heard any updates about the BT PCB, and was wondering if all orders would ship out at the same time, or will orders with a bluetooth pcb be delayed? Keep up the good work!Surely they will ship at the same time
hopefully @PlayKeyboardTW can confirmSent from my Pixel XL using Tapatalk
Post by: Jonathan0903 on Tue, 19 March 2019, 17:15:49
Haven't heard any updates about the BT PCB, and was wondering if all orders would ship out at the same time, or will orders with a bluetooth pcb be delayed? Keep up the good work!Surely they will ship at the same time
Sent from my Pixel XL using Tapatalk
Nevermind, apparently I'm blind. Update from him showed them complete on page 8 of this thread. Yay!
Post by: Sythe on Tue, 19 March 2019, 20:07:57
When are the photos of the units without the newspaper coming?
Post by: Lyle88 on Tue, 19 March 2019, 20:17:45
So how long are these steps going to take?They said they are aiming to ship out by the end of the month. So more pics should come before then.
When are the photos of the units without the newspaper coming?
Sent from my Pixel XL using Tapatalk
Post by: DoCallMeKing on Wed, 20 March 2019, 07:02:04
Post by: Lyle88 on Wed, 20 March 2019, 07:09:24
I’m still hoping to find a WKL one from someone if they are interested in selling their spot. Thanks a lot!Did you pm playkeyboardtw?
Sent from my Pixel XL using Tapatalk
Post by: DoCallMeKing on Wed, 20 March 2019, 12:44:18
I’m still hoping to find a WKL one from someone if they are interested in selling their spot. Thanks a lot!Did you pm playkeyboardtw?
Sent from my Pixel XL using Tapatalk
I spoke to him by email but there aren’t any extras available at this time.
There might be some after all GB purchasers receive theirs but I’d rather purchase a spot from someone who already has a guaranteed spot than hope to get lucky afterwards :)
Post by: Lyle88 on Wed, 20 March 2019, 14:46:25
Gotcha. Good luck mate!I’m still hoping to find a WKL one from someone if they are interested in selling their spot. Thanks a lot!Did you pm playkeyboardtw?
Sent from my Pixel XL using Tapatalk
I spoke to him by email but there aren’t any extras available at this time.
There might be some after all GB purchasers receive theirs but I’d rather purchase a spot from someone who already has a guaranteed spot than hope to get lucky afterwards :)
Sent from my Pixel XL using Tapatalk
Post by: iEatPuppers on Sun, 24 March 2019, 08:04:55
Post by: Kerasan on Sun, 24 March 2019, 08:11:52
KMK Labs.
Post by: jrfhoutx on Sun, 24 March 2019, 10:12:58
any advice on battery for pcb bt?
KMK Labs.
As long as it fits in the space inside the case, any single cell lipo with a 1.25mm 2 pin jst connector should work.
https://geekhack.org/index.php?topic=97035.msg2655283#msg2655283
Post by: Sythe on Tue, 26 March 2019, 18:07:31
I was hoping we would be getting them shipped out this week or next...
Post by: Lyle88 on Tue, 26 March 2019, 18:18:48
Still no photos or anything?Same here. Hopefully we will see an update this weekend
I was hoping we would be getting them shipped out this week or next...
Sent from my Pixel XL using Tapatalk
Post by: dr_unconscionable on Tue, 26 March 2019, 19:31:10
Post by: iEatPuppers on Tue, 26 March 2019, 20:47:32
Post by: Rumblehotep on Tue, 26 March 2019, 21:12:33
Post by: jrfhoutx on Wed, 27 March 2019, 06:39:29
Hoping the new pcbs don't have the round1 issues
They’ve stated that the issues have been found/figured out and fixed for R2. What the issue(s) were has not been said unfortunately.
Post by: DoCallMeKing on Wed, 27 March 2019, 09:21:35
Post by: Lyle88 on Wed, 27 March 2019, 15:05:04
I wish someone would inform us of what the issue was so that way people with r1 pcb's might be able to stop the bricking before it occurs.I'm pretty sure someone discovered the issue. Have a look at the end of the R1 GB thread
Sent from my Pixel XL using Tapatalk
Post by: waxpoetik on Thu, 28 March 2019, 22:57:40
Post by: EvilemX8 on Fri, 29 March 2019, 01:25:26
Post by: Lyle88 on Fri, 29 March 2019, 01:50:43
Don't be so cynical. I messaged them on Facebook and they responded quick, they are still aiming for end of March / early April they said. They have much of it done it looks like. We'll get it pretty soon I think.I would have to agree. I'm pretty sure they just need to fit the screw threads into the cases, do a QC, then pack and send out
Sent from my Pixel XL using Tapatalk
Post by: waxpoetik on Fri, 29 March 2019, 12:19:06
Post by: aslanxdeft on Sat, 30 March 2019, 15:33:03
Post by: dr_unconscionable on Sat, 30 March 2019, 16:04:48
Really hoping for a round 3 :p
I think playkeyboardtw have said a few times in this thread that there will be no R3 :/
It's possible there might be a tiny bit of extra stock once this round gets shipped, but I wouldn't hold my breath -- probably your best bet is to keep an eye on mechmarket or this thread to see if anyone wants to sell their R2 spot.
Post by: jrfhoutx on Sat, 30 March 2019, 19:42:20
Really hoping for a round 3 :p
I think playkeyboardtw have said a few times in this thread that there will be no R3 :/
It's possible there might be a tiny bit of extra stock once this round gets shipped, but I wouldn't hold my breath -- probably your best bet is to keep an eye on mechmarket or this thread to see if anyone wants to sell their R2 spot.
They also said there wouldn’t be a round 2 after round 1 was over...
Post by: arrowM on Sat, 30 March 2019, 20:13:14
Post by: Sythe on Sun, 31 March 2019, 18:12:14
Mostly just being tongue-in-cheek, although I do wish they would make more updates here rather than hearsay from Facebook messages. Still very much looking forward to it!
Exactly, I just want at least some information about what is going on.
This is getting close to 4 months later then their initial timeline and their communication has become worse the longer this group buy has gone...
I just want to have a reasonable expectation of when I'll receive my new keyboard, but as it is right now, I'm completely in the dark about when we should expect them to be shipped and I don't think random Facebook replies are enough information right now.
Post by: EvilemX8 on Mon, 01 April 2019, 03:50:41
Post by: coffeeshopcoder on Mon, 01 April 2019, 04:21:41
Post by: Lormania on Tue, 02 April 2019, 00:03:12
Post by: PlayKeyboardTW on Tue, 02 April 2019, 05:45:44
Sorry there's lack of update this time. We hope we can talk everything to all of you, but it will be just unprofessional to let all of you know the inside situation.
And we promise that we will definitely change an anodizing factory for our future products. This one really pissed us off this time (not about the quality, but the attitude).
But we hope all of you to know that we just want to perfect everything that we are gonna send to your hands. ;)
Here are cases. We hope there will be time for us to take a quick photo for showing.
[attach=1]
And PCBs, accessories and boxes as well.
[attach=2]
As a reminder, please PM us asap through GH PM, Facebook message or emails if you want to change the shipping address. :thumb:
Thanks!
Post by: Lyle88 on Tue, 02 April 2019, 05:50:18
Hi guys, finally can get back to here to announce that we are ready to pack things up then shipping your CA66s out. ;)Yaaayyy!
Sorry there's lack of update this time. We hope we can talk everything to all of you, but it will be just unprofessional to let all of you know the inside situation.
And we promise that we will definitely change an anodizing factory for out future products. This one really pissed us off this time.
But we hope all of you to know that we just want to perfect everything that we are gonna send to your hands. ;)
Here are cases. We hope there will be time for us to take a quick photo for showing.
(Attachment Link)
And PCBs, accessories and boxes as well.
(Attachment Link)
As a reminder, please PM us asap through GH PM, Facebook message or emails if you want to change the shipping address. :thumb:
Thanks!
Sent from my Pixel XL using Tapatalk
Post by: PlayKeyboardTW on Tue, 02 April 2019, 05:51:54
Mostly just being tongue-in-cheek, although I do wish they would make more updates here rather than hearsay from Facebook messages. Still very much looking forward to it!
Exactly, I just want at least some information about what is going on.
This is getting close to 4 months later then their initial timeline and their communication has become worse the longer this group buy has gone...
I just want to have a reasonable expectation of when I'll receive my new keyboard, but as it is right now, I'm completely in the dark about when we should expect them to be shipped and I don't think random Facebook replies are enough information right now.
None of that means the updates or lack of it should not be shared to the community.
Sorry for letting you guys feeling this way. Please believe us that we really want to come up with some updates to the community.
I just decided to take initiative and tried to find information as best as I could. At the end of the day, I spoke directly with PlayKeyboards the other day, and also spoke with them today, but there's really no point in mentioning what was said because it would be called hearsay and random. There is proof of life that in fact stuff is being made to get this product out. Further, this is a group buy, and this is what you signed up for - there are disclaimers everywhere about the nature of these things. If you can't wait for it, there are many people who would love to pickup a spot in this.
We are really thankful for your words and all the support. :)
Post by: lirtle on Tue, 02 April 2019, 16:33:56
Post by: Lyle88 on Tue, 02 April 2019, 16:54:26
Can you give us any outlook on when extras will be available? I really need a PCB for my round 1 CA66.Have you looked at the possible fix that was posted in the R1 GB thread? It requires a small amount of rewiring and re-programming, but I think that someone actually found the issue and there is a fix for it.
Sent from my Pixel XL using Tapatalk
Post by: lirtle on Tue, 02 April 2019, 17:24:36
Can you give us any outlook on when extras will be available? I really need a PCB for my round 1 CA66.Have you looked at the possible fix that was posted in the R1 GB thread? It requires a small amount of rewiring and re-programming, but I think that someone actually found the issue and there is a fix for it.
Sent from my Pixel XL using Tapatalk
Yeah, I've looked through the thread but I'd much rather just pay for a replacement than muck about with re-wiring. I just checked my messages with Play and they told me extras will be available once orders from this GB ship out. So I guess there's the answer.
Post by: euphxenos on Tue, 02 April 2019, 19:07:57
Yes, I've read the other thread. There have been multiple posts about what might be wrong and about ways one might be able to get it to work. Reflow some solder joints on the diodes, reflow solder joints on the controller, flash it with qmk, rewire bad columns to different pins on the controller -- I haven't seen anything in there to convince me that the issue is well understood and fixable by end users. The fixes people have described sound like they're to correct different problems from pcb to pcb. An explanation from the seller about what was wrong (and it sounds like there may have been multiple issues), what has been changed, and a corrected PCB is what I'm looking for, not a neverending repair project.
Post by: Lyle88 on Tue, 02 April 2019, 19:15:06
I'd also like to know when I can order a replacement PCB for my CA66 from the last round.Fair call. Fingers crossed these get shipped out soon so you can get hold of a V2 pcb
Yes, I've read the other thread. There have been multiple posts about what might be wrong and about ways one might be able to get it to work. Reflow some solder joints on the diodes, reflow solder joints on the controller, flash it with qmk, rewire bad columns to different pins on the controller -- I haven't seen anything in there to convince me that the issue is well understood and fixable by end users. The fixes people have described sound like they're to correct different problems from pcb to pcb. An explanation from the seller about what was wrong (and it sounds like there may have been multiple issues), what has been changed, and a corrected PCB is what I'm looking for, not a neverending repair project.
Sent from my Pixel XL using Tapatalk
Post by: Sythe on Tue, 02 April 2019, 19:41:12
Looking forward to getting my new board!
Post by: PlayKeyboardTW on Tue, 02 April 2019, 22:27:06
[attach=1]
Post by: cijanzen on Tue, 02 April 2019, 22:28:39
Quick update here. Inserting coils for rest of cases.
(Attachment Link)
Woohoo! Thanks for the update. Nice to see things coming to an end. I can’t wait to receive mine as all the rest of my supplies are ready and waiting!
Post by: Puddsy on Wed, 03 April 2019, 02:17:37
Quick update here. Inserting coils for rest of cases.
(Attachment Link)
that color is nice
Post by: DoCallMeKing on Wed, 03 April 2019, 05:04:57
Post by: Jonathan0903 on Fri, 05 April 2019, 23:34:53
Keep up the good work! :D
Post by: PlayKeyboardTW on Sat, 06 April 2019, 00:50:55
This is the right size of sample.
[attach=1]
But the 3D printer shop sent us wrong size bars which exceeded the tolerance by 0.05mm.
[attach=2]
New bars are on it's way to us.
After installing them in to cases, we are good to ship orders. :thumb:
Post by: bcbishop on Sat, 06 April 2019, 00:57:48
Thanks!
Post by: cijanzen on Sat, 06 April 2019, 08:30:28
All works almost done except the glowing bar.
This is the right size of sample.
(Attachment Link)
But the 3D printer shop sent us wrong size bars which exceeded the tolerance by 0.05mm.
(Attachment Link)
New bars are on it's way to us.
After installing them in to cases, we are good to ship orders. :thumb:
Getting close! Thank you for the update even if it’s bad news. The transparency at least allows us to understand why there’s a delay.
Post by: Lyle88 on Sat, 06 April 2019, 08:36:56
Sent from my Pixel XL using Tapatalk
Post by: edasaur on Sat, 06 April 2019, 09:16:36
Sent from my Pixel 2 XL using Tapatalk
Post by: coffeeshopcoder on Sat, 06 April 2019, 12:53:45
Post by: fromjuanm on Mon, 08 April 2019, 15:45:32
Let me know what color and options you have. Let me know how much I wont be offended. Interested in white, grey blue, dark grey, purple
Purchased a Vortex Race 3 a couple of months ago and now spending more money than I have on these keyboards... However the CA66 is a keyboard that I would love to own. I seen others in this thread selling their spots and not sure how that whole process works. Thanks
Post by: Jonathan0903 on Mon, 08 April 2019, 23:55:04
Good luck on your hunt, this really is a beautiful board <3
Post by: coffeeshopcoder on Tue, 09 April 2019, 01:52:24
Post by: Sythe on Tue, 09 April 2019, 21:55:24
Post by: PlayKeyboardTW on Sun, 14 April 2019, 00:47:52
Showing some cases for you guys first. They might look different when exposing under different light sources.
Silver and white come up when we have a bit room to shoot them.
We got some PMs and messages recently. Please resend them again if we didn't answer in time.
Thanks!
Post by: _Paco on Sun, 14 April 2019, 01:34:14
Post by: dr_unconscionable on Sun, 14 April 2019, 01:44:48
Thanks for the update! This has me really hyped to get my board soon!
Post by: Lyle88 on Sun, 14 April 2019, 01:48:06
Oh my god these look gorgeous. There's one huge problem though....... I think I might love that green more than the colour I actually chose :))Same here! I went for the white option but really feel like the green is the winner here
Thanks for the update! This has me really hyped to get my board soon!
Sent from my Pixel XL using Tapatalk
Post by: cijanzen on Sun, 14 April 2019, 10:01:27
Sorry guys. Have been really devoted ourselves to finish all stuffs at the moment.
Showing some cases for you guys first. They might look different when exposing under different light sources.
Silver and white come up when we have a bit room to shoot them.
We got some PMs and messages recently. Please resend them again if we didn't answer in time.
Thanks!
It’s been a long journey but we appreciate your transparency around the issues you ran into. Always better to know what’s going on. I for one am very excited I picked red and can’t wait to receive it!
Post by: Lormania on Sun, 14 April 2019, 11:36:59
Post by: Photoelectric on Sun, 14 April 2019, 18:59:06
Post by: coffeeshopcoder on Mon, 15 April 2019, 01:11:17
Post by: teh_pengers on Mon, 15 April 2019, 17:59:21
Post by: coffeeshopcoder on Mon, 15 April 2019, 20:25:53
Post by: jrfhoutx on Tue, 16 April 2019, 15:10:32
Am I to interpret the thread subject as shipping will likely start sometime this week?? :eek:
That title change was on the 2nd, on the 6th they encountered the issue with the light bar diffusers, which now need to be remade. I’m sure that once they’re complete and installed and everything is ready to ship out I’m sure they’ll inform everyone. But that said, never assume anything in a keyboard group buy.
Post by: bcbishop on Wed, 17 April 2019, 20:23:06
Do we know for certain that the issue has been resolved in the new round? I ordered a second CA66 in a different color, and am definitely concerned at this point.
Post by: squidshop on Wed, 17 April 2019, 23:57:12
Post by: roguesystem087 on Thu, 18 April 2019, 03:43:34
Post by: jrfhoutx on Thu, 18 April 2019, 08:52:28
Welp. After having intermittent hiccups for a few months now, it looks like my CA66 PCB from the last round just gave up the ghost as so many others have. (LED strip stuck on white, device not recognized by computer, etc.) Starting to feel like it's a matter of when, not if, with the previous round PCBs.
Do we know for certain that the issue has been resolved in the new round? I ordered a second CA66 in a different color, and am definitely concerned at this point.
They have said that they resolved the issue, but haven’t said what it was, what was done to fix it, or anything else about it, just that it was found and fixed for R2. How many grains of salt you’d like to take that with is up to you.
Post by: bcbishop on Thu, 18 April 2019, 09:15:40
They have said that they resolved the issue, but haven’t said what it was, what was done to fix it, or anything else about it, just that it was found and fixed for R2. How many grains of salt you’d like to take that with is up to you.
Gotcha, thanks. And yeah.... would feel much better about the whole thing if there was some transparency about what the issue is and how they resolved it for R2. (The info is also vital for those who have working CA66s -- as we've seen, this issue can pop up after months of working just fine.)
Post by: RETURNISO on Thu, 18 April 2019, 10:15:38
Post by: jrfhoutx on Thu, 18 April 2019, 17:08:21
They have said that they resolved the issue, but haven’t said what it was, what was done to fix it, or anything else about it, just that it was found and fixed for R2. How many grains of salt you’d like to take that with is up to you.
Gotcha, thanks. And yeah.... would feel much better about the whole thing if there was some transparency about what the issue is and how they resolved it for R2. (The info is also vital for those who have working CA66s -- as we've seen, this issue can pop up after months of working just fine.)
I’ve had mine up and running since the last round, on the first pcb I used, and in use pretty much daily since then, and I’ve not had any issues (knock on wood). It’s even been desoldered and resoldered so I could change to split spacebars. Still no problems. And I know that there are others who haven’t had any issues either. That would lead me to believe it’s either an intermittent manufacturing error, or a user error that was unaccounted for in design.
Post by: bcbishop on Thu, 18 April 2019, 19:47:49
I’ve had mine up and running since the last round, on the first pcb I used, and in use pretty much daily since then, and I’ve not had any issues (knock on wood). It’s even been desoldered and resoldered so I could change to split spacebars. Still no problems. And I know that there are others who haven’t had any issues either. That would lead me to believe it’s either an intermittent manufacturing error, or a user error that was unaccounted for in design.
I was in the same boat — until suddenly I wasn’t. Same with many of the other customers that have had issues.
Only thing that will really clear this is up is transparency from PlayKeyboardTW.
Post by: Photoelectric on Fri, 19 April 2019, 16:36:33
Post by: 4everJayWalking on Sun, 21 April 2019, 07:19:17
I have rep on /r/mk under the same username. Pm if interested as it should be shipping soon and I'd like to just change the shipping address to yours. Thanks
Post by: jrfhoutx on Sun, 21 April 2019, 10:11:47
Is it possible there are some bad solder joints that end up failing over time with flexing of the PCB when typing + just time/aging? Probably SMD components. For any poorly functioning/non-functioning PCBs that used to work, I would do a bunch of continuity checking for all the traces, including around the controller(s). Could be some diodes or resistors going bad, from some poor quality or defective batch.
It could be one or more of many things. But it doesn’t really matter cause they’re not going to tell us anyway. If they were going to tell us what the problem is, they would have chimed in by now and said it, but instead they keep ignoring the discussion like it’s not even happening.
Post by: waxpoetik on Wed, 24 April 2019, 13:02:45
Post by: ZyBeR on Wed, 24 April 2019, 22:53:40
Post by: architones on Sat, 27 April 2019, 07:42:14
Post by: Lormania on Sun, 28 April 2019, 12:15:00
Post by: waxpoetik on Sun, 28 April 2019, 12:23:08
Just here to put my obligatory "NE Update?" post. I would imagine they would have some sort of tracking for when the light bars would be arriving to them and they can easily say, "Plastic light bars have shipped and should be in 10 days, will update once we have received them". I don't know how long something like 3D printed light bars takes, but it still boggles my mind at the lack of updates on this.Assuming they are SLA or SLS printed, I'm fairly certain the manufacturing time would be under 3 days for ~150 pieces at a large scale printing place. Since they worded it as 'on the way', I am interested as to the hold up
Post by: bcbishop on Sun, 28 April 2019, 12:33:02
Post by: Lormania on Sun, 28 April 2019, 12:46:24
FWIW Barry responded to a PM on 4/19 about a PCB issue, so PlayKeyboardTW is definitely around and checking the boards. Dunno why they haven’t provided more guidance on status though...
Thanks for letting us know. But that is also my point, why isn't that information about a possible PCB issue posted in this thread where most of the people get their updates on this? If it were to cause a delay to the board by another couple of weeks, I would HOPE something like that would be posted in this thread by Barry. Unless you are referring to your own PCB issue with the last round boards.
Post by: bcbishop on Sun, 28 April 2019, 13:00:37
Of course, the lack of specifics are exactly what’s causing my concern, but that’s another issue.
Post by: Lormania on Sun, 28 April 2019, 13:26:09
Sorry for not being more clear — it was a message about my board from the last round (which recently died). Though I asked, no specific info was provided about what the issue was or how/when I could obtain a replacement, only a general assurance that it had been fixed in the new round and that I shouldn’t be concerned about my R2 order.
Of course, the lack of specifics are exactly what’s causing my concern, but that’s another issue.
Ah, no worries! Yeah, no one has been able to get an answer on the pcb issues from last round. They might not even know. Wish you the best!
I guess I have also been spoiled by my last couple of GB's for boards in the amount of information the GB runner provides. It is definitely becoming the norm now to provide as much information as possible which is good going forward in this hobby.
Still excited for the board, and trust Barry and the team 100%.
Post by: tearai on Sun, 28 April 2019, 21:30:51
Post by: Sythe on Sun, 28 April 2019, 23:32:36
After seeing the last image I would have assumed it would be finished by Easter, but its still not done...
I am getting a little impatient now.
Not a huge deal, but getting close to 6 months past the original due date is a little frustrating even if it isn't outside the norm.
This is especially true after seeing the Kyuu(which was my other potential choice to this) is in peoples hands now and it started its group buy a while later than this.
Post by: wgsunrise on Mon, 29 April 2019, 02:24:01
Would really like to know where its up to now.I feel you, man.
After seeing the last image I would have assumed it would be finished by Easter, but its still not done...
I am getting a little impatient now.
Not a huge deal, but getting close to 6 months past the original due date is a little frustrating even if it isn't outside the norm.
This is especially true after seeing the Kyuu(which was my other potential choice to this) is in peoples hands now and it started its group buy a while later than this.
Neither of the two GB which I got in around the same time (Doro67 and CA66 R2) went smoothly and lacked of transparency.
These experiences could hold me back from a lot of GB for quite some time.
Post by: ganymede on Mon, 29 April 2019, 17:04:19
Not a huge deal, but getting close to 6 months past the original due date is a little frustrating even if it isn't outside the norm.
I agree with this. It's less about the the delays and more about managing expectations. If they are months late and I don't hear anything except for an occasional "we're putting the finishing touches on," "they're almost done," etc. then it's human nature to assume something negative, e.g. there's something significantly wrong with manufacturing, they're intentionally ignoring the buyers, etc.
It would go a long way to be transparent about what's going on, even if it's a bunch of fairly insignificant roadblocks. It keeps us from inferring the worst and getting frustrated—and it'd personally get me more excited about the process of making cool stuff from scratch. I'd much rather support small makers than buy a mass-produced product, but only if the makers are halfway decent at customer service.
Post by: PlayKeyboardTW on Mon, 29 April 2019, 22:20:08
We know all of you have been guessing.
First of all, we need to let you guys know what happened during these days.
And hope you guys will understand these are kind of situations that we can't tell all our customers directly.
Since our guy has spent almost 2 month there in the factory, so much housework is awaiting for him to get back to deal with.
It will be fair for him to let all of you know we are really putting ourselves into CA66, and what has occurred.
China is now strictly regulating all anodizing factories at the moment. Especially about industrial wastewater.
The one we are working with is located in Guangdong.
Earlier there was a factory discharging wastewater secretly, not going through a treatment to reduce pollution.
And it was reported by someone to government, which lead to 15 days shutting down of all factories of that area.
So we wasn't able to take rest of cases back (most was done), until yesterday.
That's why we couldn't really post some updates which we really want to. There were so many variables for not letting us to confirm timelines with all of you. :(
Based on the successful first round CA66 groupbuy. We hope you can understand it's not about time management, or we stalk the process intentionally.
All stuffs we mentioned above were not expected, and this is our first time to deal with them.
We just want to make things perfect, then send them away to your hands safely.
Finally these are coming to an end. :) Here's a quick progress and timeline to you.
1. All works were done except white cases.
2. We will start to ship orders out after May 1st, which is the Labor Day of China. So it will be on May 3rd or 4th.
3. White cases will be done during we send first batch orders out.
4. Shipping number might be updated slower on your order of our site. It means it might be on it's way already and we need time to key in the number.
Thanks for all things hearing from you, comments, messages, emails, etc.
We are grateful for all believes. :)
Post by: EvilemX8 on Mon, 29 April 2019, 22:25:21
Post by: Lyle88 on Mon, 29 April 2019, 23:40:34
I always had faith in you guys :) Thanks so much for the work. Bad news on my end though...I got a White case. Hope the delays on that are only for a few days!Same here!
...
Sent from my Pixel XL using Tapatalk
Post by: coffeeshopcoder on Mon, 29 April 2019, 23:47:38
Post by: turbosloth on Wed, 01 May 2019, 08:01:34
Post by: PlayKeyboardTW on Fri, 03 May 2019, 08:17:12
[attach=1]
[attach=2]
Post by: Lyle88 on Fri, 03 May 2019, 08:23:36
I am getting very excited now! Sent from my Pixel XL using Tapatalk
Post by: cijanzen on Fri, 03 May 2019, 08:25:04
Hi guys. We are packing now. ;)
(Attachment Link)
(Attachment Link)
Here we go! Sorry to hear about what happened with the anodization factory. Thanks for telling us what happened even if just as an interesting fact along your journey of making these boards!
Post by: Sythe on Sat, 04 May 2019, 01:41:30
Post by: b4d_tR1p on Sat, 04 May 2019, 08:45:39
Post by: EvilemX8 on Tue, 07 May 2019, 20:58:38
Post by: Lyle88 on Tue, 07 May 2019, 21:17:42
Anyone get a tracking number or anything like that already?I'm part of the group that ordered white and will have to wait longer for anodising so no
Sent from my Pixel XL using Tapatalk
Post by: Jonathan0903 on Tue, 07 May 2019, 22:42:03
Post by: Lockkkk on Wed, 08 May 2019, 02:25:50
Kinda worried about when it ships, since I leave the country for a few months on the 17th :(You will get notice when shipping
Post by: Owl- on Wed, 08 May 2019, 09:43:39
Post by: wgsunrise on Wed, 08 May 2019, 21:40:29
quick Q, did anyone get an email of their colour choice for their plate yet? haven't gotten anything unless one hasn't been sent out yet?The color of plate was chosen when people joined GB, wasn't it?
Post by: slxdegrees on Wed, 08 May 2019, 21:42:14
yep that's correct. please check your order confirmation email.quick Q, did anyone get an email of their colour choice for their plate yet? haven't gotten anything unless one hasn't been sent out yet?The color of plate was chosen when people joined GB, wasn't it?
Sent from my LYA-L29 using Tapatalk
Post by: Lyle88 on Wed, 08 May 2019, 21:43:10
That's what I thought. But I have a vague recollection that if you added an extra alu plate maybe you couldn't choose the color of the extra onequick Q, did anyone get an email of their colour choice for their plate yet? haven't gotten anything unless one hasn't been sent out yet?The color of plate was chosen when people joined GB, wasn't it?
Sent from my Pixel XL using Tapatalk
Post by: jrfhoutx on Wed, 08 May 2019, 23:37:12
That's what I thought. But I have a vague recollection that if you added an extra alu plate maybe you couldn't choose the color of the extra onequick Q, did anyone get an email of their colour choice for their plate yet? haven't gotten anything unless one hasn't been sent out yet?The color of plate was chosen when people joined GB, wasn't it?
Sent from my Pixel XL using Tapatalk
Correct, extra plates did not have a color choice option. Barry sent out an email back in September for people to pick plate colors for the extra plates.
Post by: PlayKeyboardTW on Thu, 09 May 2019, 04:29:47
We are now having a little negotiation with the company responsible for our shipping, and waiting for them to pick up packages for us.
Some environmental staffs of local government are still checking factories in this area for illegal activities.
It will take a couple more days for us to bring white cases back from factory doing electrophoresis for us.
We hope this ends quickly. :)
Post by: Sythe on Thu, 09 May 2019, 05:53:20
Guys. All things are pretty much packed up.
We are now having a little negotiation with the company responsible for our shipping, and waiting for them to pick up packages for us.
Some environmental staffs of local government are still checking factories in this area for illegal activities.
It will take a couple more days for us to bring white cases back from factory doing electrophoresis for us.
We hope this ends quickly. :)
Appreciate the update. Looking forward to getting my keyboard!
Been a good day for updates with my Norbatouch case nearly ready for shipping too. :D
Post by: krey on Thu, 09 May 2019, 07:57:56
Hi guys. We are packing now. ;)
sweet. i actually see my number there!
Post by: Owl- on Thu, 09 May 2019, 15:13:09
That's what I thought. But I have a vague recollection that if you added an extra alu plate maybe you couldn't choose the color of the extra onequick Q, did anyone get an email of their colour choice for their plate yet? haven't gotten anything unless one hasn't been sent out yet?The color of plate was chosen when people joined GB, wasn't it?
Sent from my Pixel XL using Tapatalk
Correct, extra plates did not have a color choice option. Barry sent out an email back in September for people to pick plate colors for the extra plates.
Didn't get anything since the order confirmation. Only joined for the BT PCB and an aluminium plate, no case. Will drop barry a msg.
Post by: melikewater on Thu, 09 May 2019, 23:05:10
(or would take anyone's spot)
Post by: Choobies on Fri, 10 May 2019, 08:56:14
Post by: Jonathan0903 on Sun, 12 May 2019, 20:00:29
Post by: ZyBeR on Mon, 13 May 2019, 05:46:07
Post by: Cybee on Mon, 13 May 2019, 14:42:37
Post by: 4everJayWalking on Mon, 13 May 2019, 16:19:00
Same username on Reddit.
Post by: jupitard on Tue, 14 May 2019, 09:07:28
Post by: architones on Thu, 16 May 2019, 17:48:51
Post by: fcoury on Thu, 16 May 2019, 19:34:08
Post by: PlayKeyboardTW on Sat, 18 May 2019, 05:43:54
We kinda couldn't really do anything about it. So we decided to spend time double checking everyone's package.
And we sent out the first batch (around 110+ sets) earlier today to the shipping company.
They are sorting out shipping addresses, so it will take a bit time for tracking numbers to be out.
[attach=1]
Also, white cases are done. :thumb:
[attach=2][attach=3]
We'll be back when anything comes up for you guys. ;)
Really, really thanks for the waiting from all of you.
Post by: Lyle88 on Sat, 18 May 2019, 05:49:55
Hi again! Those government staffs stayed longer than we expected.Thanks for the update
We kinda couldn't really do anything about it. So we decided to spend time double checking everyone's package.
And we sent out the first batch (around 110+ sets) earlier today to the shipping company.
They are sorting out shipping addresses, so it will take a bit time for tracking numbers to be out.
(Attachment Link)
Also, white cases are done. :thumb:
(Attachment Link) (Attachment Link)
We'll be back when anything comes up for you guys. ;)
Really, really thanks for the waiting from all of you.
The white cases look a bit creamy.
Can you take a photo in brighter lighting?
Sent from my Pixel XL using Tapatalk
Post by: PlayKeyboardTW on Sat, 18 May 2019, 08:10:55
[attach=1]
[attach=2]
Post by: cijanzen on Sat, 18 May 2019, 08:12:22
Hi again! Those government staffs stayed longer than we expected.
We kinda couldn't really do anything about it. So we decided to spend time double checking everyone's package.
And we sent out the first batch (around 110+ sets) earlier today to the shipping company.
They are sorting out shipping addresses, so it will take a bit time for tracking numbers to be out.
(Attachment Link)
Also, white cases are done. :thumb:
(Attachment Link) (Attachment Link)
We'll be back when anything comes up for you guys. ;)
Really, really thanks for the waiting from all of you.
Yay! Getting really close now it sounds like. Hope I’m in the first batch
Post by: Lyle88 on Sat, 18 May 2019, 08:27:00
Better photos under a better light source:Beautiful! Thanks!
(Attachment Link)
(Attachment Link)
Sent from my Pixel XL using Tapatalk
Post by: bcbishop on Sat, 18 May 2019, 08:41:03
How glossy are those white cases? I remember that earlier samples of the white case were too glossy for your taste, but it’s so tough to get a sense of the finish with pictures sometimes.
Thanks!
Post by: Photoelectric on Sat, 18 May 2019, 13:08:00
Better photos under a better light source:
(Attachment Link)
Is the bottom one standard silver? Looks great (the silver, never been a fan of white).
Post by: PlayKeyboardTW on Sat, 18 May 2019, 20:11:42
Thanks for the pictures!
How glossy are those white cases? I remember that earlier samples of the white case were too glossy for your taste, but it’s so tough to get a sense of the finish with pictures sometimes.
Thanks!
You can call it semi-matte. :)
Better photos under a better light source:
(Attachment Link)
Is the bottom one standard silver? Looks great (the silver, never been a fan of white).
Yes that's a silver case. ;)
Post by: EvilemX8 on Sat, 18 May 2019, 20:14:05
Post by: vision-quest on Sun, 19 May 2019, 10:56:18
Post by: Jonathan0903 on Sun, 19 May 2019, 22:01:08
Keep up all the good work, and can't wait to start building
Post by: Jonathan0903 on Sun, 19 May 2019, 22:06:30
Thanks for the update
The white cases look a bit creamy.
Can you take a photo in brighter lighting?
Sent from my Pixel XL using Tapatalk
Creamy? If only it were true ^-^
Post by: lukelex on Wed, 22 May 2019, 16:17:00
Post by: Wojciech on Thu, 23 May 2019, 16:17:30
Post by: jariss on Fri, 24 May 2019, 00:14:50
Post by: PlayKeyboardTW on Fri, 24 May 2019, 01:21:25
Could you please put .dwg file for Alps plate?
You can find old pate files in here: https://goo.gl/DXNwqL (https://goo.gl/DXNwqL)
New plate files will be uploaded after GB is done. :thumb:
Where will we get our shipping tracking number. Will it be e-mailed or is it through the playkeyboard website?
On the website of your order. :)
Soon it will be put in.
Post by: Sythe on Sun, 26 May 2019, 22:55:23
Post by: Lyle88 on Sun, 26 May 2019, 23:32:45
Any more updated on status of shipping?I asked yesterday via the chat on their website and they said they hope to start sending out tracking numbers today via email update. It sounded like if you created a login for play-keyboard.store when you joined the GB you might be able to see your tracking number there too
Sent from my Pixel XL using Tapatalk
Post by: Sythe on Mon, 27 May 2019, 00:44:12
I asked yesterday via the chat on their website and they said they hope to start sending out tracking numbers today via email update. It sounded like if you created a login for play-keyboard.store when you joined the GB you might be able to see your tracking number there too
Ok, cool.
I don't think I signed up on the site when I did my order, so will have to wait for the email and hope mine is in the first batch...
Post by: PlayKeyboardTW on Mon, 27 May 2019, 08:56:04
Unfortunately we got 3 orders lacking of brass plates. Another small production was on going earlier today already.
So it means that there will be some extra brass plates put on our site after all GB orders are sent (and other extra parts as well).
Shipping numbers should be out these days, but I (Barry) am going to Taipei for Computex for next 3 days.
So I won't be able to update numbers to orders, as they might be already on the way to you guys.
I will finish the work as soon as I get back. ;)
Thanks!
Post by: Lyle88 on Mon, 27 May 2019, 09:13:43
Guys, all orders are now in the shipping company right now awaiting for being shipped (including white cases).YAAAY! Have fun at computex! - I'm jealous
Unfortunately we got 3 orders lacking of brass plates. Another small production was on going earlier today already.
So it means that there will be some extra brass plates put on our site after all GB orders are sent (and other extra parts as well).
Shipping numbers should be out these days, but I (Barry) am going to Taipei for Computex for next 3 days.
So I won't be able to update numbers to orders, as they might be already on the way to you guys.
I will finish the work as soon as I get back. ;)
Thanks!
Sent from my Pixel XL using Tapatalk
Post by: Photoelectric on Mon, 27 May 2019, 11:36:26
Post by: jrfhoutx on Mon, 27 May 2019, 19:29:50
Guys, all orders are now in the shipping company right now awaiting for being shipped (including white cases).
Unfortunately we got 3 orders lacking of brass plates. Another small production was on going earlier today already.
So it means that there will be some extra brass plates put on our site after all GB orders are sent (and other extra parts as well).
Shipping numbers should be out these days, but I (Barry) am going to Taipei for Computex for next 3 days.
So I won't be able to update numbers to orders, as they might be already on the way to you guys.
I will finish the work as soon as I get back. ;)
Thanks!
Thanks for the update!
Will there be a notice here or via email when the extras go up on the website? And is there any timeframe for when those will go up after GB completion?
What about the PCBs that were promised for those of us from R1?
Post by: jariss on Mon, 27 May 2019, 20:54:31
Post by: Jonathan0903 on Tue, 28 May 2019, 08:45:13
Have fun building everyone!
Post by: Jonathan0903 on Wed, 29 May 2019, 04:43:43
[attachimg=1]
Post by: Lyle88 on Wed, 29 May 2019, 05:01:10
Just took delivery of this beauty! Thanks for hosting this GB Barry, and I hope everyone else loves their new case as much as I do :)Naiiisu!
(Attachment Link)
Sent from my Pixel XL using Tapatalk
Post by: Kerasan on Wed, 29 May 2019, 05:29:13
Just took delivery of this beauty! Thanks for hosting this GB Barry, and I hope everyone else loves their new case as much as I do :)
(Attachment Link)
have packages been shipped?
KMK Labs.
Post by: Jonathan0903 on Wed, 29 May 2019, 10:03:28
Finished a wireless build, now just waiting for GMK Minimal to ship!
Post by: EvilemX8 on Wed, 29 May 2019, 10:05:49
Post by: Jonathan0903 on Wed, 29 May 2019, 10:07:32
So jealous....I'm just hoping I'm not one of the 3 delayed orders :( was it shipped with DHL?
I live on the same island as the starter of this GB, so my shipping was handled with a local carrier called SF.
Post by: roymt76 on Wed, 29 May 2019, 10:07:53
Post by: fer.real on Wed, 29 May 2019, 12:47:00
So jealous....I'm just hoping I'm not one of the 3 delayed orders :( was it shipped with DHL?
I live on the same island as the starter of this GB, so my shipping was handled with a local carrier called SF.
SF Express? Oh. No.
Post by: cijanzen on Wed, 29 May 2019, 12:47:57
So jealous....I'm just hoping I'm not one of the 3 delayed orders :( was it shipped with DHL?
I live on the same island as the starter of this GB, so my shipping was handled with a local carrier called SF.
SF Express? Oh. No.
Most orders are shipped by DHL so don’t worry.
Post by: Jonathan0903 on Wed, 29 May 2019, 12:49:58
Post by: edasaur on Wed, 29 May 2019, 14:25:55
Out of loop here. is there something horrible about SF Express that I should know about?So jealous....I'm just hoping I'm not one of the 3 delayed orders :( was it shipped with DHL?
I live on the same island as the starter of this GB, so my shipping was handled with a local carrier called SF.
SF Express? Oh. No.
Most orders are shipped by DHL so don’t worry.
Sent from my Pixel 2 XL using Tapatalk
Post by: cijanzen on Wed, 29 May 2019, 16:21:03
Out of loop here. is there something horrible about SF Express that I should know about?So jealous....I'm just hoping I'm not one of the 3 delayed orders :( was it shipped with DHL?
I live on the same island as the starter of this GB, so my shipping was handled with a local carrier called SF.
SF Express? Oh. No.
Most orders are shipped by DHL so don’t worry.
Sent from my Pixel 2 XL using Tapatalk
Not that I’m aware of but because they were concerned about it I figured I’d mention that DHL is being used for this GB.
Post by: jrfhoutx on Wed, 29 May 2019, 16:31:47
(Attachment Link)
Finished a wireless build, now just waiting for GMK Minimal to ship!
What battery did you use for your build?
Post by: fer.real on Wed, 29 May 2019, 17:13:53
Out of loop here. is there something horrible about SF Express that I should know about?So jealous....I'm just hoping I'm not one of the 3 delayed orders :( was it shipped with DHL?
I live on the same island as the starter of this GB, so my shipping was handled with a local carrier called SF.
SF Express? Oh. No.
Most orders are shipped by DHL so don’t worry.
Sent from my Pixel 2 XL using Tapatalk
Not that I’m aware of but because they were concerned about it I figured I’d mention that DHL is being used for this GB.
SF Express is just slow, that's all. I'm glad to hear packages are being shipped DHL.
Post by: Jonathan0903 on Thu, 30 May 2019, 04:23:44
Here's the build I promised to show Barry as soon as I got my hands on a CA66 <3
Post by: Jonathan0903 on Thu, 30 May 2019, 04:24:56
(Attachment Link)
Finished a wireless build, now just waiting for GMK Minimal to ship!
What battery did you use for your build?
Just a 2500 mAh lithium battery I had left over from an Adafruit electronics buy.
Post by: Jonathan0903 on Thu, 30 May 2019, 04:39:10
Post by: Jonathan0903 on Thu, 30 May 2019, 10:40:54
I've run into trouble with the Bluetooth wireless function on the keyboard. The battery I have plugged in does charge with the switch in the off position, and I have a battery tester that reads it as having been fully charged. But when I turn the power on via the switch between tab and Q, nothing happens. Any ideas?
And nevermind! Just a quick PSA/tip for people that have purchased the bluetooth PCB. The power leads on all batteries that you buy to fit this board will be reversed. When inserted into the board, the red lead should, in fact, match up with the positive (+) silkscreen on the PCB (quite obvious in hindsight, but I assumed any batteries bought with the same connector would be compatible). A detached lead that you can solder to your own battery is included, which is already in the correct orientation, so if you don't want to fiddle around with the connector, you can just snip it off and solder on the replacement provided.
Post by: Kerasan on Thu, 30 May 2019, 12:48:55
I've run into trouble with the Bluetooth wireless function on the keyboard. The battery I have plugged in does charge with the switch in the off position, and I have a battery tester that reads it as having been fully charged. But when I turn the power on via the switch between tab and Q, nothing happens. Any ideas?
And nevermind! Just a quick PSA/tip for people that have purchased the bluetooth PCB. The power leads on all batteries that you buy to fit this board will be reversed. When inserted into the board, the red lead should, in fact, match up with the positive (+) silkscreen on the PCB (quite obvious in hindsight, but I assumed any batteries bought with the same connector would be compatible). A detached lead that you can solder to your own battery is included, which is already in the correct orientation, so if you don't want to fiddle around with the connector, you can just snip it off and solder on the replacement provided.
do you have a picture of the problem?
I didn't understand correctly
KMK Labs.
Post by: Jonathan0903 on Thu, 30 May 2019, 13:00:29
I've run into trouble with the Bluetooth wireless function on the keyboard. The battery I have plugged in does charge with the switch in the off position, and I have a battery tester that reads it as having been fully charged. But when I turn the power on via the switch between tab and Q, nothing happens. Any ideas?
And nevermind! Just a quick PSA/tip for people that have purchased the bluetooth PCB. The power leads on all batteries that you buy to fit this board will be reversed. When inserted into the board, the red lead should, in fact, match up with the positive (+) silkscreen on the PCB (quite obvious in hindsight, but I assumed any batteries bought with the same connector would be compatible). A detached lead that you can solder to your own battery is included, which is already in the correct orientation, so if you don't want to fiddle around with the connector, you can just snip it off and solder on the replacement provided.
do you have a picture of the problem?
I didn't understand correctly
KMK Labs.
Red wire on bottom, black on top. That how it should be, but the stock connector on batteries have it reversed so that red is on top when it's plugged in. Just swap the two around in the plastic housing for the leads or cut it off and solder on the included extra connector that comes with the CA66. So my battery (and pretty much all other batteries) will have the red wire on top when you first get them. Switch, and youre done. The connector isn't symmetrical, so that's why you have to fiddle around with the wires.
[attachimg=1]
Post by: EvilemX8 on Thu, 30 May 2019, 13:33:42
Post by: Lyle88 on Thu, 30 May 2019, 18:20:07
Sent from my Pixel XL using Tapatalk
Post by: bcbishop on Thu, 30 May 2019, 18:56:07
Are many people still waiting on teaching information? I haven't received an email yet
Sent from my Pixel XL using Tapatalk
Still waiting for shipping info here. IIRC Barry said he would be sending out shipping info after Computex, but packages were going out in the meantime.
Post by: DoCallMeKing on Thu, 30 May 2019, 19:37:07
Thanks a lot everyone. ENJOY!!!
Post by: Vizir on Fri, 31 May 2019, 10:09:19
Sent from my Pixel 2 using Tapatalk
Post by: fer.real on Fri, 31 May 2019, 10:17:23
Just got delivery notification from DHL. Estimated arrival Tuesday June 4th.
Sent from my Pixel 2 using Tapatalk
Me, too!
Post by: Kerasan on Fri, 31 May 2019, 10:37:17
Just got delivery notification from DHL. Estimated arrival Tuesday June 4th.
Sent from my Pixel 2 using Tapatalk
me too, june 4th :cool:
Post by: EvilemX8 on Fri, 31 May 2019, 10:41:12
Post by: mute on Fri, 31 May 2019, 11:08:23
Dang, did any of you guys order white cases?
Yeah, I got a white case. Delivery notice is June 4th. :D
Post by: Chaselicious17 on Fri, 31 May 2019, 11:34:39
Post by: EvilemX8 on Fri, 31 May 2019, 11:35:27
Post by: EvilemX8 on Fri, 31 May 2019, 14:36:13
Post by: Chaselicious17 on Fri, 31 May 2019, 14:45:17
Upon checking tracking details looks like package weight is 1.1lbs which is way too light for a keyboard. Anyone else have a similiar weight?Yea my tracking also says 1.1lbs... weird
Post by: jrfhoutx on Fri, 31 May 2019, 15:16:57
Upon checking tracking details looks like package weight is 1.1lbs which is way too light for a keyboard. Anyone else have a similiar weight?Yea my tracking also says 1.1lbs... weird
Al I have coming is a bt pcb, aluminum plate, and ti badge and mine also says 1.1lbs. It’s probably the same on all the packages just to make inputting details easier.
Post by: architones on Fri, 31 May 2019, 18:16:15
Post by: cijanzen on Fri, 31 May 2019, 18:16:50
Did you guys receive an email regarding tracking or was it through the website? My board probably hasn't shipped yet but I'm just curious
Text message for me
Post by: EvilemX8 on Fri, 31 May 2019, 18:21:40
Did you guys receive an email regarding tracking or was it through the website? My board probably hasn't shipped yet but I'm just curious
I've signed up for DHL shipping notifications previously so anytime a DHL shipment goes to my home address I get a text.
Post by: Lyle88 on Fri, 31 May 2019, 18:36:08
I totally forgot that I also did this, I got a text message while I was sleeping. ETA MONDAY!!! YEEETDid you guys receive an email regarding tracking or was it through the website? My board probably hasn't shipped yet but I'm just curious
I've signed up for DHL shipping notifications previously so anytime a DHL shipment goes to my home address I get a text.
Sent from my Pixel XL using Tapatalk
Post by: theo313 on Fri, 31 May 2019, 20:43:41
I've run into trouble with the Bluetooth wireless function on the keyboard. The battery I have plugged in does charge with the switch in the off position, and I have a battery tester that reads it as having been fully charged. But when I turn the power on via the switch between tab and Q, nothing happens. Any ideas?
And nevermind! Just a quick PSA/tip for people that have purchased the bluetooth PCB. The power leads on all batteries that you buy to fit this board will be reversed. When inserted into the board, the red lead should, in fact, match up with the positive (+) silkscreen on the PCB (quite obvious in hindsight, but I assumed any batteries bought with the same connector would be compatible). A detached lead that you can solder to your own battery is included, which is already in the correct orientation, so if you don't want to fiddle around with the connector, you can just snip it off and solder on the replacement provided.
do you have a picture of the problem?
I didn't understand correctly
KMK Labs.
Red wire on bottom, black on top. That how it should be, but the stock connector on batteries have it reversed so that red is on top when it's plugged in. Just swap the two around in the plastic housing for the leads or cut it off and solder on the included extra connector that comes with the CA66. So my battery (and pretty much all other batteries) will have the red wire on top when you first get them. Switch, and youre done. The connector isn't symmetrical, so that's why you have to fiddle around with the wires.
(Attachment Link)
Are those Mil Max sockets?? Supposedly, they didn't fit R1, but if they fit R2, amazing!
Post by: melikewater on Fri, 31 May 2019, 20:52:21
Post by: iEatPuppers on Fri, 31 May 2019, 21:08:50
Post by: dr_unconscionable on Fri, 31 May 2019, 23:22:07
Post by: architones on Sat, 01 June 2019, 01:54:34
Did you guys receive an email regarding tracking or was it through the website? My board probably hasn't shipped yet but I'm just curious
I've signed up for DHL shipping notifications previously so anytime a DHL shipment goes to my home address I get a text.
Thanks! I'll take a look at setting up shipping notifications and see if my board is on its way!
Post by: T0mb3ry on Sat, 01 June 2019, 03:28:31
Post by: Photoelectric on Sat, 01 June 2019, 03:43:40
P.S.: found that I can schedule a vacation hold with DHL for a later delivery date, so all is well.
Post by: krey on Sat, 01 June 2019, 04:13:10
Post by: PlayKeyboardTW on Sat, 01 June 2019, 06:03:30
There are some orders with incorrect shipping details still.
So if you didn't get any notification of shipping, please expect a mail for correcting your shipping address from us later.
Extra parts will be in stock on our store after all GB orders are sent, as we said it before.
We need to make sure everyone participating in this GB receive their items correctly first.
If you are looking for any spare parts for replacement, please follow our Instagram account and Facebook page to get the first info.
Thanks guys! :thumb:
Post by: Jonathan0903 on Sat, 01 June 2019, 06:03:39
I've run into trouble with the Bluetooth wireless function on the keyboard. The battery I have plugged in does charge with the switch in the off position, and I have a battery tester that reads it as having been fully charged. But when I turn the power on via the switch between tab and Q, nothing happens. Any ideas?
And nevermind! Just a quick PSA/tip for people that have purchased the bluetooth PCB. The power leads on all batteries that you buy to fit this board will be reversed. When inserted into the board, the red lead should, in fact, match up with the positive (+) silkscreen on the PCB (quite obvious in hindsight, but I assumed any batteries bought with the same connector would be compatible). A detached lead that you can solder to your own battery is included, which is already in the correct orientation, so if you don't want to fiddle around with the connector, you can just snip it off and solder on the replacement provided.
do you have a picture of the problem?
I didn't understand correctly
KMK Labs.
Red wire on bottom, black on top. That how it should be, but the stock connector on batteries have it reversed so that red is on top when it's plugged in. Just swap the two around in the plastic housing for the leads or cut it off and solder on the included extra connector that comes with the CA66. So my battery (and pretty much all other batteries) will have the red wire on top when you first get them. Switch, and youre done. The connector isn't symmetrical, so that's why you have to fiddle around with the wires.
(Attachment Link)
Are those Mil Max sockets?? Supposedly, they didn't fit R1, but if they fit R2, amazing!
Yep! Socketed the entire board, and installed sip sockets for the LEDs for good measure. Here's to hoping this is end game :))
Post by: fer.real on Sat, 01 June 2019, 07:44:20
Yep! Socketed the entire board, and installed sip sockets for the LEDs for good measure. Here's to hoping this is end game :))
What size sockets did you use? Could you post a link?
Post by: theo313 on Sat, 01 June 2019, 09:49:09
Mill Max 7305
Post by: Lyle88 on Sat, 01 June 2019, 10:05:45
Probably these: https://www.digikey.com/products/en?keywords=7305&keywords=7305-0-15-15-47-27-10-0&pkeyword=7305&v=How do you know those ones are the right size though?
Mill Max 7305
Sent from my Pixel XL using Tapatalk
Post by: theo313 on Sat, 01 June 2019, 10:39:03
Post by: Lyle88 on Sat, 01 June 2019, 10:54:36
Because I've used these on several boards. The two common Mill Max sockets used on mech boards is the 0305 or the 7305, and the ones he pictured are definitely not the 0305. You should wait for the guy above to confirm, but for myself, I am 99% certain it's the 7305.Cool, I'll wait to hear. Is there any downside to adding millmax sockets?
Sent from my Pixel XL using Tapatalk
Post by: theo313 on Sat, 01 June 2019, 11:10:45
A keycap puller can pull out a switch, depending on the pin size on the switch. That bothers some people but not me.
Post by: theo313 on Sat, 01 June 2019, 11:27:12
https://www.digikey.com/products/en?keywords=%200305-2-15-80-47-80-10-0%20
Post by: bcbishop on Sat, 01 June 2019, 11:34:27
Barry, are there any differences in the Bluetooth and non-Bluetooth PCBs that would cause sockets that work in one to not work in the other?
Post by: Jonathan0903 on Sat, 01 June 2019, 12:56:40
Because I've used these on several boards. The two common Mill Max sockets used on mech boards is the 0305 or the 7305, and the ones he pictured are definitely not the 0305. You should wait for the guy above to confirm, but for myself, I am 99% certain it's the 7305.Cool, I'll wait to hear. Is there any downside to adding millmax sockets?
Sent from my Pixel XL using Tapatalk
Yep! Socketed the entire board, and installed sip sockets for the LEDs for good measure. Here's to hoping this is end game :))
What size sockets did you use? Could you post a link?
They are indeed the 7305 sockets. I remember seeing a GB floating around mechmarket not too long ago, might want to give it a look for better prices.
Post by: Jonathan0903 on Sat, 01 June 2019, 12:58:24
Post by: theo313 on Sat, 01 June 2019, 15:13:12
Post by: fer.real on Sat, 01 June 2019, 15:54:00
What does one use for LEDs? SIP sockets?
Post by: Rumblehotep on Sat, 01 June 2019, 17:26:25
Post by: Jonathan0903 on Sat, 01 June 2019, 20:33:15
Wow, thanks for the info. I'm going to try this.
What does one use for LEDs? SIP sockets?
That's what I'm using, yes. Mill Max sockets don't fit in the LED solder points.
Post by: jariss on Sat, 01 June 2019, 21:47:48
Post by: Wojciech on Mon, 03 June 2019, 03:07:22
Post by: iEatPuppers on Mon, 03 June 2019, 05:51:39
Post by: Jonathan0903 on Mon, 03 June 2019, 05:53:40
I'm having issues with my pcb not being recognised by qmk toolbox (on win10 machine). Does anyone have any clue as to why this is happening? I can't flash my layout :(
Use the ydkb site that was recommended and follow the instructions under whichever version PCB you have (CAD66/CA66). Flashing should be pretty simple, hold ESC while plugging in and it should be automatically recognized. Instructions are also included in the opening post on this thread.
Post by: iEatPuppers on Mon, 03 June 2019, 07:02:41
I'm having issues with my pcb not being recognised by qmk toolbox (on win10 machine). Does anyone have any clue as to why this is happening? I can't flash my layout :(
Use the ydkb site that was recommended and follow the instructions under whichever version PCB you have (CAD66/CA66). Flashing should be pretty simple, hold ESC while plugging in and it should be automatically recognized. Instructions are also included in the opening post on this thread.
Thanks, that solved all my problems.
Post by: cjhard on Mon, 03 June 2019, 09:27:49
Post by: Jonathan0903 on Mon, 03 June 2019, 09:28:54
I just received my CA66 from DHL, but it's missing the 1x Ti badge I ordered alongside it.
Check the foam insert in the packaging. There should be a cutout if I remember correctly from round 1.
Post by: cjhard on Mon, 03 June 2019, 09:34:27
I just received my CA66 from DHL, but it's missing the 1x Ti badge I ordered alongside it.
Check the foam insert in the packaging. There should be a cutout if I remember correctly from round 1.
Ahh you're right, I just found it there and had to quickly "nevermind, sorry to waste your time!" to support chat just now.
Thanks! One of my RGB LED's dislodged from handling during shipping too, but should be able to solder that back in place without much frustration :D
Post by: T0mb3ry on Mon, 03 June 2019, 11:08:24
Post by: Jonathan0903 on Mon, 03 June 2019, 11:23:52
Just got my white CA66. I have to say this is probably the most white keyboard i have seen so far. I really appreciate it. :D
I'm so scared I'm going to scratch the finish on mine, the white is just amazing
Post by: T0mb3ry on Mon, 03 June 2019, 11:26:29
Just got my white CA66. I have to say this is probably the most white keyboard i have seen so far. I really appreciate it. :D
I'm so scared I'm going to scratch the finish on mine, the white is just amazing
You will need quite some force to scratch it. You don't need to be too careful with it but also not too confident. Just handle it well and it will be alright ;)
Post by: ilezia on Mon, 03 June 2019, 12:26:56
Post by: theo313 on Mon, 03 June 2019, 12:53:19
Really intrigued by the idea of building a hot swappable CA66.
Barry, are there any differences in the Bluetooth and non-Bluetooth PCBs that would cause sockets that work in one to not work in the other?
Received my kit today. The mill max sockets do not fit the non-BT pcb, same as R1. The pads are a little too fat. Fits perfect on BT pcb.
Post by: bcbishop on Mon, 03 June 2019, 13:58:15
Really intrigued by the idea of building a hot swappable CA66.
Barry, are there any differences in the Bluetooth and non-Bluetooth PCBs that would cause sockets that work in one to not work in the other?
Received my kit today. The mill max sockets do not fit the non-BT pcb, same as R1. The pads are a little too fat. Fits perfect on BT pcb.
Thanks, theo313.
Booooooooooooo! :-)
Post by: PM_Your_Switches on Mon, 03 June 2019, 14:16:09
Post by: theo313 on Mon, 03 June 2019, 14:35:14
On the BT PCB, it appears that there is a hole drilled out where the pad is (pictured, blue arrow) for the "|\" switch. Is this somehow intentional? It appears that I would have to bridge it to the closest pad there.
Non-BT PCB, it appears that two pads are drilled into, and half there, again, what's up with that and will it eff things up?
Post by: portbaron on Mon, 03 June 2019, 15:23:49
Post by: portbaron on Mon, 03 June 2019, 16:00:37
Post by: Lyle88 on Mon, 03 June 2019, 16:07:27
OK so how do you hook up the usb on the CA66 pcb...there is no connector or wires supplied.Pretty sure there should be a connector cable in there, the guy posting pictures further up has one has one
Post by: waxpoetik on Mon, 03 June 2019, 16:24:08
Long wait - but it ended up great! Loving this thing.
Post by: cijanzen on Mon, 03 June 2019, 16:55:02
Show Image(https://i.imgur.com/JBKq1B7.jpg)
Long wait - but it ended up great! Loving this thing.
Beauty! Mine just came in and I’m wondering if I should tell my bus driver to hurry up because there’s a new keyboard at home!
Post by: Asbrodeus on Mon, 03 June 2019, 17:32:24
(https://i.imgur.com/MHeeuNA.jpg)
(https://i.imgur.com/uv7useG.jpg)
(https://i.imgur.com/wLD0YU5.jpg)
SA royalty for color comparison
Post by: Lyle88 on Mon, 03 June 2019, 17:54:48
Did anyone else who ordered dark red receive an extremely dark purple/maroon color with a completely different back side color? :-\Hmm. That looks quite similar to the photo in the OP but that colour matching between the case top and bottom is not goodShow Image(https://i.imgur.com/MHeeuNA.jpg)Show Image(https://i.imgur.com/uv7useG.jpg)Show Image(https://i.imgur.com/wLD0YU5.jpg)
SA royalty for color comparison
Edit: on second look, it looks a lot darker but the photo in the OP is in natural light, not inside so it's hard to tell
Sent from my Pixel XL using Tapatalk
Post by: cijanzen on Mon, 03 June 2019, 18:00:00
Did anyone else who ordered dark red receive an extremely dark purple/maroon color with a completely different back side color? :-\Show Image(https://i.imgur.com/MHeeuNA.jpg)Show Image(https://i.imgur.com/uv7useG.jpg)Show Image(https://i.imgur.com/wLD0YU5.jpg)
SA royalty for color comparison
Mine is quite dark as well but I would say it’s in the realm of what I was expecting. The bottom plate isn’t a perfect match but again, it’s not outside of what I’d consider acceptable.
On another note, does anyone know what B2 (second from top on far right) of the standard PCB is mapped to? I’m trying to ensure everything is working before soldering. Already found a loose component causing my Down arrow to not work so I’m going to try and resoldering that.
Post by: theo313 on Mon, 03 June 2019, 18:55:31
Post by: cijanzen on Mon, 03 June 2019, 18:57:07
Can you guys please post pics of your BT and non-BT 0CBs for comparison? Much appreciated in advance.What do you want to see?
Post by: bcbishop on Mon, 03 June 2019, 19:34:09
1. Is anybody else's case missing the two long rubber strips / feet that were on the last round?
2. I'm no doubt going to feel stupid once I hear the answer, but what are the white plastic washers for, and what are the little components with the yellow dots (they're loose in a bag for one of my PCBs, and part of a strip in the other)?
(https://i.imgur.com/EvJK6x2.jpg)
Post by: upintheclouds on Mon, 03 June 2019, 19:41:37
Some issues:
On the BT PCB, it appears that there is a hole drilled out where the pad is (pictured, blue arrow) for the "|\" switch. Is this somehow intentional? It appears that I would have to bridge it to the closest pad there.
Non-BT PCB, it appears that two pads are drilled into, and half there, again, what's up with that and will it eff things up?
That hole in the pad is for the pcb-mount stabilizers for ISO enter key position. The stabilizer orientation is reversed between BT and non-BT PCB, so the hole sizes and positions near that pad are different. This shouldn't screw anything up, per-se, but does seem like it will make a hot-swap build a bit harder :/
The bottom hole on your non-BT PCB is for the leg of a PCB-mounted switch to fit through.
Post by: fer.real on Mon, 03 June 2019, 19:43:35
Just got mine, and the white finish is indeed gorgeous! Two quick questions though:
1. Is anybody else's case missing the two long rubber strips / feet that were on the last round?
2. I'm no doubt going to feel stupid once I hear the answer, but what are the white plastic washers for, and what are the little components with the yellow dots (they're loose in a bag for one of my PCBs, and part of a strip in the other)?Show Image(https://i.imgur.com/EvJK6x2.jpg)
1. I got the feet.
2. The SMD components are white LEDs for backlighting the Winkey and far right column.
3. The washers are for use with screw in stabs, so that you don't short any pads.
Post by: Sythe on Mon, 03 June 2019, 20:00:01
Got my tracking, but it still just says they haven't received the package yet. :(
Post by: iEatPuppers on Mon, 03 June 2019, 20:16:20
Did anyone else who ordered dark red receive an extremely dark purple/maroon color with a completely different back side color? :-\Show Image(https://i.imgur.com/MHeeuNA.jpg)Show Image(https://i.imgur.com/uv7useG.jpg)Show Image(https://i.imgur.com/wLD0YU5.jpg)
SA royalty for color comparison
Mine is quite dark as well but I would say it’s in the realm of what I was expecting. The bottom plate isn’t a perfect match but again, it’s not outside of what I’d consider acceptable.
On another note, does anyone know what B2 (second from top on far right) of the standard PCB is mapped to? I’m trying to ensure everything is working before soldering. Already found a loose component causing my Down arrow to not work so I’m going to try and resoldering that.
My dark red also looks purplish. I asked my brother what colour it looked like, and he mentioned that "it's burgundy depending on the lighting".
I'm happy with it though, the ano is very nice.
Post by: bcbishop on Mon, 03 June 2019, 20:26:48
Just got mine, and the white finish is indeed gorgeous! Two quick questions though:
1. Is anybody else's case missing the two long rubber strips / feet that were on the last round?
2. I'm no doubt going to feel stupid once I hear the answer, but what are the white plastic washers for, and what are the little components with the yellow dots (they're loose in a bag for one of my PCBs, and part of a strip in the other)?Show Image(https://i.imgur.com/EvJK6x2.jpg)
1. I got the feet.
2. The SMD components are white LEDs for backlighting the Winkey and far right column.
3. The washers are for use with screw in stabs, so that you don't short any pads.
Thanks fer.real!
Post by: cijanzen on Mon, 03 June 2019, 22:39:36
(https://uploads.tapatalk-cdn.com/20190604/39953932201dfcb328b8a6b63a12393b.jpg)
Getting the battery working was a bit of a pain but it’s charging and works without power. Gotta figure out how the Bluetooth actually works though!
Post by: Lyle88 on Mon, 03 June 2019, 22:51:16
Doesn’t do nearly enough justice. I’m going to take pictures again tomorrow when I have some daylight.Nice! I remember that vendor posting on r/mm about using old style phone cables. It looks good!Show Image(https://uploads.tapatalk-cdn.com/20190604/39953932201dfcb328b8a6b63a12393b.jpg)
Getting the battery working was a bit of a pain but it’s charging and works without power. Gotta figure out how the Bluetooth actually works though!
Sent from my Pixel XL using Tapatalk
Post by: Jonathan0903 on Mon, 03 June 2019, 23:35:08
Doesn’t do nearly enough justice. I’m going to take pictures again tomorrow when I have some daylight.Show Image(https://uploads.tapatalk-cdn.com/20190604/39953932201dfcb328b8a6b63a12393b.jpg)
Getting the battery working was a bit of a pain but it’s charging and works without power. Gotta figure out how the Bluetooth actually works though!
There isn't a pairing mode or anything; as soon as you switch on the bluetooth with the switch between tab and Q, it should become discoverable.
Post by: Jonathan0903 on Mon, 03 June 2019, 23:38:00
Some issues:
On the BT PCB, it appears that there is a hole drilled out where the pad is (pictured, blue arrow) for the "|\" switch. Is this somehow intentional? It appears that I would have to bridge it to the closest pad there.
Non-BT PCB, it appears that two pads are drilled into, and half there, again, what's up with that and will it eff things up?
That hole in the pad is for the pcb-mount stabilizers for ISO enter key position. The stabilizer orientation is reversed between BT and non-BT PCB, so the hole sizes and positions near that pad are different. This shouldn't screw anything up, per-se, but does seem like it will make a hot-swap build a bit harder :/
The bottom hole on your non-BT PCB is for the leg of a PCB-mounted switch to fit through.
Didn't affect hotswap as much as I thought it would, there's enough contact there to make a rigid connection. I've swapped switches about 4 times already, because I'm indecisive like that.
Post by: Lyle88 on Mon, 03 June 2019, 23:51:59
Sent from my Pixel XL using Tapatalk
Post by: Jonathan0903 on Mon, 03 June 2019, 23:56:29
Post by: cijanzen on Tue, 04 June 2019, 00:01:07
Doesn’t do nearly enough justice. I’m going to take pictures again tomorrow when I have some daylight.Show Image(https://uploads.tapatalk-cdn.com/20190604/39953932201dfcb328b8a6b63a12393b.jpg)
Getting the battery working was a bit of a pain but it’s charging and works without power. Gotta figure out how the Bluetooth actually works though!
There isn't a pairing mode or anything; as soon as you switch on the bluetooth with the switch between tab and Q, it should become discoverable.
I actually flashed it with some of the Bluetooth options on ydkb and got it paired to my phone just fine!
This is a pretty cool board if I do say so myself.
Edit: hmm seem to be having trouble getting the board into pairing mode. Not sure what’s going on.
Post by: andrewregal on Tue, 04 June 2019, 00:45:04
Post by: theo313 on Tue, 04 June 2019, 01:27:08
Some issues:
On the BT PCB, it appears that there is a hole drilled out where the pad is (pictured, blue arrow) for the "|\" switch. Is this somehow intentional? It appears that I would have to bridge it to the closest pad there.
Non-BT PCB, it appears that two pads are drilled into, and half there, again, what's up with that and will it eff things up?
That hole in the pad is for the pcb-mount stabilizers for ISO enter key position. The stabilizer orientation is reversed between BT and non-BT PCB, so the hole sizes and positions near that pad are different. This shouldn't screw anything up, per-se, but does seem like it will make a hot-swap build a bit harder :/
The bottom hole on your non-BT PCB is for the leg of a PCB-mounted switch to fit through.
Didn't affect hotswap as much as I thought it would, there's enough contact there to make a rigid connection. I've swapped switches about 4 times already, because I'm indecisive like that.
It will definitely be able to work wit just a short bridge. I have all of my sockets in, but haven't even soldered them in, yet all exept that key, and z work without solder. I will solder them in later, but wanted to test it out. Very easy to program, BT connected right away.
Two things:
1) How do I disable or sabilize LED? The rainbow cycle is annoying.
2) The Z key does not have a hole big enough for the middle part of the switch to go through. How dangerous is it to drill the hole a little larger?
Post by: PM_Your_Switches on Tue, 04 June 2019, 01:28:52
I guess I don't understand the RGB controls though. The top key toggles on/off and the key below that does nothing. I thought that key changed the modes?
[attachimg=1]
Post by: Jonathan0903 on Tue, 04 June 2019, 03:10:49
Some issues:
On the BT PCB, it appears that there is a hole drilled out where the pad is (pictured, blue arrow) for the "|\" switch. Is this somehow intentional? It appears that I would have to bridge it to the closest pad there.
Non-BT PCB, it appears that two pads are drilled into, and half there, again, what's up with that and will it eff things up?
That hole in the pad is for the pcb-mount stabilizers for ISO enter key position. The stabilizer orientation is reversed between BT and non-BT PCB, so the hole sizes and positions near that pad are different. This shouldn't screw anything up, per-se, but does seem like it will make a hot-swap build a bit harder :/
The bottom hole on your non-BT PCB is for the leg of a PCB-mounted switch to fit through.
Didn't affect hotswap as much as I thought it would, there's enough contact there to make a rigid connection. I've swapped switches about 4 times already, because I'm indecisive like that.
It will definitely be able to work wit just a short bridge. I have all of my sockets in, but haven't even soldered them in, yet all exept that key, and z work without solder. I will solder them in later, but wanted to test it out. Very easy to program, BT connected right away.
Two things:
1) How do I disable or sabilize LED? The rainbow cycle is annoying.
2) The Z key does not have a hole big enough for the middle part of the switch to go through. How dangerous is it to drill the hole a little larger?
I love it. The white came out really well. There were a couple black specs on the outside, but they wiped away easily.
I guess I don't understand the RGB controls though. The top key toggles on/off and the key below that does nothing. I thought that key changed the modes?
(Attachment Link)
You have to program in LED controls from ydkb, as they arent included by default.
Post by: PlayKeyboardTW on Tue, 04 June 2019, 04:00:56
It's quite taking up my energy to check replies one by one.
But if you got any problem and you can't find a solution in thread, contact me via FB messages and email.
These two ways will get you a quicker reply.
As most of you had got your board.
Please do test your PCB by following these steps before starting your build (make it as a habit is better to every custom PCB):
1. Every PCB should include a main board, a daughter board and a flat cable.
Plastic washers are for screw in stabilizers to prevent shorting.
2. Check out flashing guides here: http://bit.ly/2W9tSet (http://bit.ly/2W9tSet)
and flash PCB with your hex file once. That way you can fully test your PCB and don't have to ask what's the function for every key.
3. These two guides were for PCB of last round. There are some changes for bettering it in this round.
I will try to make a new one and tell you guys where are differences for you to play with.
Thanks. ;)
Post by: Lyle88 on Tue, 04 June 2019, 05:34:18
Very sneaky
(https://uploads.tapatalk-cdn.com/20190604/005f8eb1da7dd8d2e3e6f5ae6d3aebfa.jpg)(https://uploads.tapatalk-cdn.com/20190604/867654d9a6662da1510619c740a895b9.jpg)Sent from my Pixel XL using Tapatalk
Post by: cijanzen on Tue, 04 June 2019, 08:18:08
I flashed mine with a layer and keys that toggle BT/USB, BT Pairing, BT stop pairing, and BT forget.
I was able to pair it to my iPhone once but am not able to pair it to any of my devices now including the iPhone originally paired with.
The board is working fine otherwise and I can tell it’s going into BT mode when I use the toggle because it won’t work on my computer when it’s plugged in but in BT mode.
Any tips would be appreciated!
Post by: Kerasan on Tue, 04 June 2019, 09:33:49
Has anyone noticed a reasonable number of poorly anodised spots on their board? Mine just arrived and from a distance it looks great, but up close there are a number of spots where the anodisation is a bit iffy.. I understand this will never be perfect, I just want to get an idea of other people's results - white case here if it makes a difference. Will take photos when I get home
Sent from my Pixel XL using Tapatalk
yes, on my board there are several spots they don't even remove with dedicated metal cleaner (dark red)
Post by: Chaselicious17 on Tue, 04 June 2019, 09:53:05
Oh man, I'm really digging how mine came out. Just waiting on massdrop to give me my HP's so I can build this thing.
Post by: theo313 on Tue, 04 June 2019, 10:53:13
Anyone with a BT PCB that can help me out?
I flashed mine with a layer and keys that toggle BT/USB, BT Pairing, BT stop pairing, and BT forget.
I was able to pair it to my iPhone once but am not able to pair it to any of my devices now including the iPhone originally paired with.
The board is working fine otherwise and I can tell it’s going into BT mode when I use the toggle because it won’t work on my computer when it’s plugged in but in BT mode.
Any tips would be appreciated!
Hmm. I didn't program any BT commands in the flash. It auto showed up on my PC BT options after I flashed it and turned it on.
Post by: 5inn3d- on Tue, 04 June 2019, 12:04:05
any advise on this OP?
Post by: JDragon on Tue, 04 June 2019, 12:08:44
Post by: theo313 on Tue, 04 June 2019, 13:57:12
Any suggestions for batteries?
I used this: https://www.amazon.com/gp/product/B01NAX9XYG/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
However, its riiiight on the cusp of being too fat. I cut up an old medical card and glued it to the top of it so it doesn't get poked by the PCB.
It works, but some people would prefer a flatter profile I'm sure.
Post by: ZyBeR on Tue, 04 June 2019, 15:25:30
I have the BT-version and my USB-connector is connected with a classic connector/cable, but I see some have ribbon/flat cables?
I also got an on/off switch separately, I guess it's the BT power switch.
Some have received plastic washers for screw-in stabs, I didn't.
Post by: cijanzen on Tue, 04 June 2019, 15:39:55
Is there different type of connectors on different pcb's?
I have the BT-version and my USB-connector is connected with a classic connector/cable, but I see some have ribbon/flat cables?
I also got an on/off switch separately, I guess it's the BT power switch.
Some have received plastic washers for screw-in stabs, I didn't.
The standard PCB does have a different connector than the Bluetooth PCB, that is correct. You have to solder the switch into the PCB. Don’t forget to do that before putting the plate and switches in!
Post by: Wojciech on Tue, 04 June 2019, 16:12:56
Post by: theo313 on Tue, 04 June 2019, 17:36:58
Post by: Kerasan on Tue, 04 June 2019, 17:47:53
Post by: theo313 on Tue, 04 June 2019, 17:56:07
guys did you all use ydkb to configure it?
There are instuctions on the ydkb.io website.
Download the Reflash tool under the Download tab
Configure the keyboard under CA66 or CAD66 depending on WKL or HHKB style
Download the Hex File
Drag the Hex file into the reflash tool
It will tell you to unplug the keyboard, do so
Plug it in and hold escape while it begins to flash
Boom its done
Post by: Lyle88 on Tue, 04 June 2019, 17:56:57
guys did you all use ydkb to configure it?I did. Be aware that the link to ydkb configurator defaults to the non BT PCB firmware. You need to choose CAD66 for the BT board.
Sent from my Pixel XL using Tapatalk
Post by: Vizir on Tue, 04 June 2019, 18:33:15
Sent from my Pixel 2 using Tapatalk
Post by: Jonathan0903 on Tue, 04 June 2019, 20:19:52
Post by: Reicheous on Tue, 04 June 2019, 20:36:29
Post by: Jonathan0903 on Tue, 04 June 2019, 20:38:06
Post by: portbaron on Tue, 04 June 2019, 20:47:54
Post by: MeloDet on Tue, 04 June 2019, 21:23:01
Post by: cijanzen on Tue, 04 June 2019, 21:47:58
[attach=1]
https://imgur.com/a/bTtVE3v (https://imgur.com/a/bTtVE3v)
Post by: portbaron on Tue, 04 June 2019, 21:51:34
Built mine up with orange alps as well! Anyone have any issues with programming though? After flashing I'm getting a device malfunctioned error.Make sure you made a hex file for the CAD66 not the CA66. Also, hold the esc down until it's done flashing. Fixed it for me.
Post by: Vizir on Tue, 04 June 2019, 22:19:48
2 of each per switch. Buy 5 extra of each for if you mess some up.
just to be sure, i'm looking at the following for switches:
https://www.digikey.com/products/en?keywords=%200305-2-15-80-47-80-10-0%20
2 per switch
and this for the LEDs:
https://www.digikey.com/products/en?keywords=%20310-43-164-41-001000%20
2 per led
right?
Post by: Lyle88 on Tue, 04 June 2019, 22:23:01
If you don't mind waiting2 of each per switch. Buy 5 extra of each for if you mess some up.
just to be sure, i'm looking at the following for switches:
https://www.digikey.com/products/en?keywords=%200305-2-15-80-47-80-10-0%20
2 per switch
and this for the LEDs:
https://www.digikey.com/products/en?keywords=%20310-43-164-41-001000%20
2 per led
right?
https://www.reddit.com/r/mechmarket/comments/bwvhza/gb_millmax_sockets_7305_06040611/?utm_medium=android_app&utm_source=share
Sent from my Pixel XL using Tapatalk
Post by: MeloDet on Tue, 04 June 2019, 22:24:56
Ah, that was it. Was using CA66. Thanks!Built mine up with orange alps as well! Anyone have any issues with programming though? After flashing I'm getting a device malfunctioned error.Make sure you made a hex file for the CAD66 not the CA66. Also, hold the esc down until it's done flashing. Fixed it for me.
Post by: Vizir on Tue, 04 June 2019, 22:50:25
If you don't mind waiting2 of each per switch. Buy 5 extra of each for if you mess some up.
just to be sure, i'm looking at the following for switches:
https://www.digikey.com/products/en?keywords=%200305-2-15-80-47-80-10-0%20
2 per switch
and this for the LEDs:
https://www.digikey.com/products/en?keywords=%20310-43-164-41-001000%20
2 per led
right?
https://www.reddit.com/r/mechmarket/comments/bwvhza/gb_millmax_sockets_7305_06040611/?utm_medium=android_app&utm_source=share
Sent from my Pixel XL using Tapatalk
oh, i linked the wrong one. i don't mind waiting and will join the GB. what about the SIP sockets?
Post by: PlayKeyboardTW on Wed, 05 June 2019, 00:28:03
Did anyone else who ordered dark red receive an extremely dark purple/maroon color with a completely different back side color? :-\Show Image(https://i.imgur.com/MHeeuNA.jpg)Show Image(https://i.imgur.com/uv7useG.jpg)Show Image(https://i.imgur.com/wLD0YU5.jpg)
SA royalty for color comparison
Please send us a mail or PM. Let's see what we can do for you. :thumb:
Space is not working on mine. Is this the issue? It looks like I’m missing the “T4” component.
If you need the component, please send us a mail or PM.
Or you can remove one from an unused key to fill that position.
I was excited to get this in the mail a couple of days ago but there are quite a few marks that can't be removed and seem to be scuffs/scratches.
any advise on this OP?
Send us a mail or PM with photos. Thanks. ;)
Any suggestions for batteries?
Most 3.7v Li batteries will do the work. Just be careful of size of pin head.
Built the first one, Orange ALPS.
Built the first one, Orange ALPS.
That's the first ALPS build we got here! Naisu :thumb:
Built mine up with orange alps as well! Anyone have any issues with programming though? After flashing I'm getting a device malfunctioned error.
Try to flash the board again and replug the cable. Make sure you are using the right hex file.
Wanted to share some actual good shots of my built board. I'm quite happy with it and the colour I think is a bit more purple? But it's definitely growing on me!
(Attachment Link)
https://imgur.com/a/bTtVE3v (https://imgur.com/a/bTtVE3v)
That's adorable. This color is quite a hard one to control, and sometime it's color can go either way under different light sources.
But glad you liked it. ;)
Post by: Sythe on Wed, 05 June 2019, 00:52:36
I got the tracking on 1/6 and DHL still haven't got the package yet.
I keep checking it and no progress, so still impatiently waiting... lol
Would have been nice to get it before this weekend as I would have had the long weekend to build it. :(
Post by: portbaron on Wed, 05 June 2019, 01:12:20
I kind of like the maroon.
Post by: jariss on Wed, 05 June 2019, 02:31:16
https://imgur.com/a/jBlmX8e
The caps are not on switches; they are just placed for a mock up.
Post by: Lyle88 on Wed, 05 June 2019, 02:50:16
I am happy I finally have my board but am also a little surprised with the amount of nicks/scratches/ano marks. I am also missing one of the plate screws. Don't know if this was normal or within the realm of quality control but it seems like a little more than normal.From what I've seen the nicks/scratches are more easily visible on the coloured boards. Also the ano mismatch between case/base is present on other colours.
https://imgur.com/a/jBlmX8e
The caps are not on switches; they are just placed for a mock up.
Whether this is considered standard or acceptable I can't comment, this was my first GB. From the photos I've seen, some of them I would not be happy with.
Any missing parts will be sent to you.
I would email PlayKeyboard directly with photos and ask them the question (about scratches/nicks/imperfections).
Sent from my Pixel XL using Tapatalk
Post by: Jonathan0903 on Wed, 05 June 2019, 04:19:09
I am happy I finally have my board but am also a little surprised with the amount of nicks/scratches/ano marks. I am also missing one of the plate screws. Don't know if this was normal or within the realm of quality control but it seems like a little more than normal.
https://imgur.com/a/jBlmX8e
The caps are not on switches; they are just placed for a mock up.
You might want to check the little bag of spare parts for screws; I recieved a few extra screws in my package along with the RGB LEDs and their associated diodes for the macro column, as well as a JST power connector.
Post by: b4d_tR1p on Wed, 05 June 2019, 05:06:00
Post by: lakeboredom on Wed, 05 June 2019, 06:04:15
How many sip and milmax sockets are needed per switch?Millmax dont fit this pcb homie.
Sent from my Pixel 2 using Tapatalk
Post by: Lyle88 on Wed, 05 June 2019, 06:08:03
You will find from the post further up that they fit r2How many sip and milmax sockets are needed per switch?Millmax dont fit this pcb homie.
Sent from my Pixel 2 using Tapatalk
Sent from my Pixel XL using Tapatalk
Post by: Jonathan0903 on Wed, 05 June 2019, 06:10:27
How many sip and milmax sockets are needed per switch?Millmax dont fit this pcb homie.
Sent from my Pixel 2 using Tapatalk
It does for the Bluetooth one
Post by: lakeboredom on Wed, 05 June 2019, 06:13:47
Post by: DoCallMeKing on Wed, 05 June 2019, 07:31:18
I know there might be extras after all shipping occurs but I’m not sure when that’ll be and I need a pcb.
I will pay over retail for it. Just need one at the moment.
Thanks and enjoy.
Post by: cijanzen on Wed, 05 June 2019, 19:36:42
I can’t get my Bluetooth working. Light is on so I know the board has power but it doesn’t show up in Bluetooth settings on any of my devices.
Post by: Lyle88 on Wed, 05 June 2019, 19:46:38
Did anyone with a BT keyboard reflash their firmware and still have BT working?Did you create your hex file using the CAD66 (not CA66) option on the ydkb configurator website?
I can’t get my Bluetooth working. Light is on so I know the board has power but it doesn’t show up in Bluetooth settings on any of my devices.
Sent from my Pixel XL using Tapatalk
Post by: cijanzen on Wed, 05 June 2019, 19:47:16
Did anyone with a BT keyboard reflash their firmware and still have BT working?Did you create your hex file using the CAD66 (not CA66) option on the ydkb configurator website?
I can’t get my Bluetooth working. Light is on so I know the board has power but it doesn’t show up in Bluetooth settings on any of my devices.
Sent from my Pixel XL using Tapatalk
Yep, definitely used the CAD66 option
Post by: Lyle88 on Wed, 05 June 2019, 19:49:16
Hmm. I can't help sorry, I haven't got a battery to start testing my BT pcbDid anyone with a BT keyboard reflash their firmware and still have BT working?Did you create your hex file using the CAD66 (not CA66) option on the ydkb configurator website?
I can’t get my Bluetooth working. Light is on so I know the board has power but it doesn’t show up in Bluetooth settings on any of my devices.
Sent from my Pixel XL using Tapatalk
Yep, definitely used the CAD66 option
Sent from my Pixel XL using Tapatalk
Post by: Rumblehotep on Wed, 05 June 2019, 21:54:57
Post by: Lormania on Wed, 05 June 2019, 22:17:35
https://imgur.com/a/7bn2ld5
They are so obvious when you look at the board and I can feel some of them as I run my finger over. I have an R1 Grey that I love and it is flawless, but this one I don't think I can use because the defects are so obvious that all I do is stare at them. Barry, is there anything you can do to correct this? I know others have defects as well. This would be like a C stock board, yet I paid for an A stock. How does this even pass QC? Would cerakoting help cover these? I fear the two near the badge would still be there since the basically feel like cuts that they tried to fill in with something before anodizing.
Post by: PlayKeyboardTW on Thu, 06 June 2019, 01:10:18
Got my board yesterday but was finally able to open it today. I got to say I am disappointed. I have many defects in my anodization. Here is the link to the imgur:
https://imgur.com/a/7bn2ld5
They are so obvious when you look at the board and I can feel some of them as I run my finger over. I have an R1 Grey that I love and it is flawless, but this one I don't think I can use because the defects are so obvious that all I do is stare at them. Barry, is there anything you can do to correct this? I know others have defects as well. This would be like a C stock board, yet I paid for an A stock. How does this even pass QC? Would cerakoting help cover these? I fear the two near the badge would still be there since the basically feel like cuts that they tried to fill in with something before anodizing.
Sorry for the disappointment.
Please PM me along with this album link and your order number.
Let's see how we can do the aftersale service for you.
Post by: EvilemX8 on Thu, 06 June 2019, 02:18:44
Post by: PlayKeyboardTW on Thu, 06 June 2019, 08:51:31
Is anyone else's PCB randomly disconnecting for a split second at times? I hear the USB disconnect noise but my board works like right after. I am using the BT PCB, and a DIY ZapCables cable I made. The cable works with my 1800mini just fine, never disconnects, so I don't think its the cable.
Please check 3 things for us:
1. Flat cable is well connected or not.
2. Your power supply is stable or not. Especially when RGB strip is turned on.
3. If your device or home wires are not grounding properly, you can try to stick some tape around USB C connector.
Good luck!
Post by: theo313 on Thu, 06 June 2019, 18:26:10
Post by: cijanzen on Thu, 06 June 2019, 18:28:38
My Bluetooth was working perfectly until I connected a different keyboard to the computer. When I went to plug the CA66 back in it is not recognizing the BT connection. Even redoing the whole BT connection process and nothing.
Yeah I can’t get my BT working either. Paired once to my iPhone and then left it. Now it doesn’t show up on any of my devices.
What’s odd is I downloaded a Bluetooth scanner app and it comes up on there but with minimal data.
(https://uploads.tapatalk-cdn.com/20190606/5a22e83412edca3ebff79fb4c6ba2f39.jpg)
Post by: bcbishop on Thu, 06 June 2019, 18:34:54
After reading about the issue Reicheous had, I checked out the two in my order and sure enough -- there's a missing component on one of mine as well. Good times.
(https://i.imgur.com/jmvAP7i.jpg)
Post by: Jonathan0903 on Thu, 06 June 2019, 19:10:44
If everyone hasn't done so already, I'd recommend giving your PCBs a thorough once-over to make sure everything is where it's supposed to be.
After reading about the issue Reicheous had, I checked out the two in my order and sure enough -- there's a missing component on one of mine as well. Good times.Show Image(https://i.imgur.com/jmvAP7i.jpg)
There are extra diodes included, just in case this happened during shipping and handling, so you can solder one on. Just make sure it's in the right orientation and everything should be fine.
Post by: PlayKeyboardTW on Thu, 06 June 2019, 19:46:43
My Bluetooth was working perfectly until I connected a different keyboard to the computer. When I went to plug the CA66 back in it is not recognizing the BT connection. Even redoing the whole BT connection process and nothing.
My Bluetooth was working perfectly until I connected a different keyboard to the computer. When I went to plug the CA66 back in it is not recognizing the BT connection. Even redoing the whole BT connection process and nothing.
Yeah I can’t get my BT working either. Paired once to my iPhone and then left it. Now it doesn’t show up on any of my devices.
What’s odd is I downloaded a Bluetooth scanner app and it comes up on there but with minimal data.Show Image(https://uploads.tapatalk-cdn.com/20190606/5a22e83412edca3ebff79fb4c6ba2f39.jpg)
Please make sure you clear connection fully when trying to connect another device from an original one.
The keycode "Clear paired device" is still under construction. There are some bugs waiting to be fix at the moment. So don't use it now.
If you are using iOS devices, sometimes you can't search CAD66 on another iOS device apart from the already connected one.
That's the common problem we know now when you are using a bluetooth product which you don't have to install driver for it.
You can try install another free bluetooth software like "Adafruit Bluefruit LE Connect" to connect CAD66.
These are situations and solutions we know now for connecting issues.
We'll update more if we found others.
If everyone hasn't done so already, I'd recommend giving your PCBs a thorough once-over to make sure everything is where it's supposed to be.
After reading about the issue Reicheous had, I checked out the two in my order and sure enough -- there's a missing component on one of mine as well. Good times.Show Image(https://i.imgur.com/jmvAP7i.jpg)
There are extra diodes included, just in case this happened during shipping and handling, so you can solder one on. Just make sure it's in the right orientation and everything should be fine.
Thanks for all the help mate. ;)
Post by: Lyle88 on Thu, 06 June 2019, 20:09:39
If everyone hasn't done so already, I'd recommend giving your PCBs a thorough once-over to make sure everything is where it's supposed to be.
After reading about the issue Reicheous had, I checked out the two in my order and sure enough -- there's a missing component on one of mine as well. Good times.Show Image(https://i.imgur.com/jmvAP7i.jpg)
There are extra diodes included, just in case this happened during shipping and handling, so you can solder one on. Just make sure it's in the right orientation and everything should be fine.
I didn't get any spare diodes in with mine..
Wondering if anyone can compare their non-BT board to mine. It looks like there is a component missing but it's not near a switch hole like the rest do I'm not sure if it's just a mis-print.(https://uploads.tapatalk-cdn.com/20190607/dbdfc1d3ff0486c654ad16451d92bb01.jpg)
Sent from my Pixel XL using Tapatalk
Post by: PlayKeyboardTW on Thu, 06 June 2019, 22:19:22
If everyone hasn't done so already, I'd recommend giving your PCBs a thorough once-over to make sure everything is where it's supposed to be.
After reading about the issue Reicheous had, I checked out the two in my order and sure enough -- there's a missing component on one of mine as well. Good times.Show Image(https://i.imgur.com/jmvAP7i.jpg)
There are extra diodes included, just in case this happened during shipping and handling, so you can solder one on. Just make sure it's in the right orientation and everything should be fine.
I didn't get any spare diodes in with mine..
Wondering if anyone can compare their non-BT board to mine. It looks like there is a component missing but it's not near a switch hole like the rest do I'm not sure if it's just a mis-print.Show Image(https://uploads.tapatalk-cdn.com/20190607/dbdfc1d3ff0486c654ad16451d92bb01.jpg)
Sent from my Pixel XL using Tapatalk
That position was just without any component. Don't bother as long as your PCB works correctly. :)
Post by: cijanzen on Thu, 06 June 2019, 22:19:24
If everyone hasn't done so already, I'd recommend giving your PCBs a thorough once-over to make sure everything is where it's supposed to be.
After reading about the issue Reicheous had, I checked out the two in my order and sure enough -- there's a missing component on one of mine as well. Good times.Show Image(https://i.imgur.com/jmvAP7i.jpg)
There are extra diodes included, just in case this happened during shipping and handling, so you can solder one on. Just make sure it's in the right orientation and everything should be fine.
I didn't get any spare diodes in with mine..
Wondering if anyone can compare their non-BT board to mine. It looks like there is a component missing but it's not near a switch hole like the rest do I'm not sure if it's just a mis-print.Show Image(https://uploads.tapatalk-cdn.com/20190607/dbdfc1d3ff0486c654ad16451d92bb01.jpg)
Sent from my Pixel XL using Tapatalk
My regular PCB is the exact same in that spot and it works fine.
Also, for anyone who encounters a Bluetooth issue, I downloaded the adafruit Bluetooth app which then suggested a firmware update for the Bluetooth module and I figured what the heck. After that it paired to my Mac! Still hoping it will work long term but this is progress.
Thanks for the tip Barry
Post by: cijanzen on Thu, 06 June 2019, 22:27:49
At least that means there’s hope?
Post by: architones on Thu, 06 June 2019, 23:14:10
In spite of it having a couple case flaws, I'm in love with how the whole build turned out.
(https://i.imgur.com/TjvkPUv.jpg)
Post by: Lyle88 on Thu, 06 June 2019, 23:32:19
Board arrived and built yesterday!Is that hago oblivion? I wish my oCo Honeywell red accents were that dark!
In spite of it having a couple case flaws, I'm in love with how the whole build turned out.Show Image(https://i.imgur.com/TjvkPUv.jpg)
Edit: looks incredible!
Sent from my Pixel XL using Tapatalk
Post by: architones on Thu, 06 June 2019, 23:38:08
Board arrived and built yesterday!Is that hago oblivion? I wish my oCo Honeywell red accents were that dark!
In spite of it having a couple case flaws, I'm in love with how the whole build turned out.Show Image(https://i.imgur.com/TjvkPUv.jpg)
Edit: looks incredible!
Sent from my Pixel XL using Tapatalk
Thanks! 😁 It's 7bit's Round 6 keycaps actually! Took forever to get but it was definitely worth it
Post by: Lyle88 on Thu, 06 June 2019, 23:43:47
Wish I had known about the community when 7bit was running those GBs. I was about a year too late, now the markups are crazy!Board arrived and built yesterday!Is that hago oblivion? I wish my oCo Honeywell red accents were that dark!
In spite of it having a couple case flaws, I'm in love with how the whole build turned out.Show Image(https://i.imgur.com/TjvkPUv.jpg)
Edit: looks incredible!
Sent from my Pixel XL using Tapatalk
Thanks!
Sent from my Pixel XL using Tapatalk
Post by: 5inn3d- on Fri, 07 June 2019, 05:24:29
Thanks in advance.
Post by: Lyle88 on Fri, 07 June 2019, 05:36:56
can someone educate me on what these are for? especially the white ribbonThe bag with the ribbon cable is for non-BT PCB. That ribbon cable connects the main PCB to the daughter board with the USB connection on it. The other bag is for the BT PCB
Thanks in advance.
Sent from my Pixel XL using Tapatalk
Post by: 5inn3d- on Fri, 07 June 2019, 05:43:58
Post by: Lyle88 on Fri, 07 June 2019, 06:55:32
(https://uploads.tapatalk-cdn.com/20190607/e5a22cb2695df02e79dbc5d5169b2c82.jpg)Sent from my Pixel XL using Tapatalk
Post by: Oatburner on Fri, 07 June 2019, 10:21:10
Post by: Lyle88 on Fri, 07 June 2019, 10:31:30
Waiting on my DHL order to get picked up, but in the mean time, here's the battery I got. Digi-Key p/n 1908-1377-ND. The clearance is a bit tight, but some fish paper on the back of the PCB will solve that concern. I'll update when the build is done, and once I see how many months it will run on this beefy 6Ah boy.That is a big batty indeedShow Image(https://i.imgur.com/FjsGsiG.jpg)
Sent from my Pixel XL using Tapatalk
Post by: pengers on Fri, 07 June 2019, 12:36:24
Emailed on Monday but haven't gotten a response yet.
Thanks!
Post by: Lyle88 on Fri, 07 June 2019, 13:02:53
Sent from my Pixel XL using Tapatalk
Post by: fer.real on Fri, 07 June 2019, 14:53:36
https://images.app.goo.gl/DeRmLKGU6pAzUeNG6
Post by: Choobies on Fri, 07 June 2019, 15:02:28
Post by: topherrehpot on Fri, 07 June 2019, 15:45:25
If everyone hasn't done so already, I'd recommend giving your PCBs a thorough once-over to make sure everything is where it's supposed to be.
After reading about the issue Reicheous had, I checked out the two in my order and sure enough -- there's a missing component on one of mine as well. Good times.Show Image(https://i.imgur.com/jmvAP7i.jpg)
There are extra diodes included, just in case this happened during shipping and handling, so you can solder one on. Just make sure it's in the right orientation and everything should be fine.
I didn't get any spare diodes in with mine..
Wondering if anyone can compare their non-BT board to mine. It looks like there is a component missing but it's not near a switch hole like the rest do I'm not sure if it's just a mis-print.Show Image(https://uploads.tapatalk-cdn.com/20190607/dbdfc1d3ff0486c654ad16451d92bb01.jpg)
Sent from my Pixel XL using Tapatalk
Is it possible to put Kailh hot swap sockets on this board??
Post by: cijanzen on Fri, 07 June 2019, 15:45:47
If everyone hasn't done so already, I'd recommend giving your PCBs a thorough once-over to make sure everything is where it's supposed to be.
After reading about the issue Reicheous had, I checked out the two in my order and sure enough -- there's a missing component on one of mine as well. Good times.Show Image(https://i.imgur.com/jmvAP7i.jpg)
There are extra diodes included, just in case this happened during shipping and handling, so you can solder one on. Just make sure it's in the right orientation and everything should be fine.
I didn't get any spare diodes in with mine..
Wondering if anyone can compare their non-BT board to mine. It looks like there is a component missing but it's not near a switch hole like the rest do I'm not sure if it's just a mis-print.Show Image(https://uploads.tapatalk-cdn.com/20190607/dbdfc1d3ff0486c654ad16451d92bb01.jpg)
Sent from my Pixel XL using Tapatalk
Is it possible to put Kailh hot swap sockets on this board??
No
Post by: topherrehpot on Fri, 07 June 2019, 16:00:02
Post by: Lyle88 on Fri, 07 June 2019, 16:15:35
I am quite disappointed that I just spent over an hour lubing 70 roselios then building the board to find that two switches are not fully in, and cannot go in.
Worse than that is, I ended up having to ruin one switch to get it out because the angle it was stuck on prevented me from being able to press the tabs in.
Photos to show the angle the switch gets stuck on. #1 and #2 are both too small to fit switches properly.
The photo that says same switch fits fine in the 1u hotswap hole but not in either of the 2 shown.
Edit: spelling
(https://uploads.tapatalk-cdn.com/20190607/02e5d7dcc6452ca9c787226d12d006cc.jpg)(https://uploads.tapatalk-cdn.com/20190607/0b91b4dfa81ca910dfbf0e92b3d350c8.jpg)(https://uploads.tapatalk-cdn.com/20190607/5b1fd9b1fcb4ee8006831f32c6f64021.jpg)
Sent from my Pixel XL using Tapatalk
Post by: jrfhoutx on Fri, 07 June 2019, 17:23:48
I thought not but the pic I quoted has some on the right hand column. I'm ordering milmax sockets anyway but thought the Kailh sockets might be easier to deal with. Ah well. Thanks.
That picture is of the non-Bluetooth V2 pcb. They made the right column hotswap, but only the right column.
Pcbs need to be designed for kailh sockets from the beginning, they’re not something that can be retrofitted. They require a footprint that has pads on the back side of the board and non-plated holes cut right where the usual switch mounting holes would be.
Post by: topherrehpot on Fri, 07 June 2019, 17:27:14
I thought not but the pic I quoted has some on the right hand column. I'm ordering milmax sockets anyway but thought the Kailh sockets might be easier to deal with. Ah well. Thanks.
That picture is of the non-Bluetooth V2 pcb. They made the right column hotswap, but only the right column.
Pcbs need to be designed for kailh sockets from the beginning, they’re not something that can be retrofitted. They require a footprint that has pads on the back side of the board and non-plated holes cut right where the usual switch mounting holes would be.
Got it! Thank you.
Post by: ninjapirate on Fri, 07 June 2019, 20:59:46
(https://i.redd.it/zymf01il7y231.jpg)
HFO/HFR work so well on this case. Only complaint I have is that the bottom cover is a very, very tight fit... I have to smack the case to get it to come loose.
Post by: PlayKeyboardTW on Fri, 07 June 2019, 21:22:13
Has anyone else has an issue with two of the plate holes being a fraction too small to fit the switch fully in?
I am quite disappointed that I just spent over an hour lubing 70 roselios then building the board to find that two switches are not fully in, and cannot go in.
Worse than that is, I ended up having to ruin one switch to get it out because the angle it was stuck on prevented me from being able to press the tabs in.
Photos to show the angle the switch gets stuck on. #1 and #2 are both too small to fit switches properly.
The photo that says same switch fits fine in the 1u hotswap hole but not in either of the 2 shown.
Edit: spellingShow Image(https://uploads.tapatalk-cdn.com/20190607/02e5d7dcc6452ca9c787226d12d006cc.jpg)Show Image(https://uploads.tapatalk-cdn.com/20190607/0b91b4dfa81ca910dfbf0e92b3d350c8.jpg)Show Image(https://uploads.tapatalk-cdn.com/20190607/5b1fd9b1fcb4ee8006831f32c6f64021.jpg)
Sent from my Pixel XL using Tapatalk
Please cut off PCB mounting legs if you are feeling switches tight to get in position.
Sometimes this may happen due to mounting holes on PCB, or plate switch holes narrowing a bit after anodizing.
And this happens most on transparent switches by their housing material. They are thicker than black housing Cherry switches.
PlayKeyboardTW, are you still working your way through the support emails?
Emailed on Monday but haven't gotten a response yet.
Thanks!
Yes. We will definitely check them if mails aren't sent into spam mail folder by accident.
You can PM or send mail again to us to make sure we see your inquires. ;)
Finally got a chance to put my purple R2 together.Show Image(https://i.redd.it/zymf01il7y231.jpg)
HFO/HFR work so well on this case. Only complaint I have is that the bottom cover is a very, very tight fit... I have to smack the case to get it to come loose.
Looks awesome! :cool:
Sorry about the tightness of back plate. Sometimes it happens. :-X
Post by: Choobies on Fri, 07 June 2019, 21:31:32
Post by: PlayKeyboardTW on Fri, 07 June 2019, 21:40:22
Can anything be done about the case anodization defects? :(
Please send us a mail or PM along with your order number.
Thanks. :)
Post by: ZyBeR on Sun, 09 June 2019, 10:42:53
Post by: cijanzen on Sun, 09 June 2019, 11:17:38
Is there or will there be any way of running QMK on the Bluetooth PCB?
I’m talking with Mech Merlin about porting it over. I might send him my PCB so he can help us with that!
Post by: dr_unconscionable on Sun, 09 June 2019, 11:23:47
Is there or will there be any way of running QMK on the Bluetooth PCB?
I’m talking with Mech Merlin about porting it over. I might send him my PCB so he can help us with that!
Ooh this would be awesome :)
Post by: theo313 on Mon, 10 June 2019, 08:41:56
Finally got a chance to put my purple R2 together.Show Image(https://i.redd.it/zymf01il7y231.jpg)
HFO/HFR work so well on this case. Only complaint I have is that the bottom cover is a very, very tight fit... I have to smack the case to get it to come loose.
The Purple is damn hot! Semi regret just going basic black, but the black is so well done too.
Post by: theo313 on Mon, 10 June 2019, 08:43:42
Post by: cijanzen on Mon, 10 June 2019, 08:44:26
Basic black with Space Cadet on Outemu silent Skys.
That basic black sure is pretty
Post by: theo313 on Mon, 10 June 2019, 08:56:04
Basic black with Space Cadet on Outemu silent Skys.
That basic black sure is pretty
Thanks! I actually went for black on your reccomendation
Post by: jrfhoutx on Mon, 10 June 2019, 09:00:02
Waiting on my DHL order to get picked up, but in the mean time, here's the battery I got. Digi-Key p/n 1908-1377-ND. The clearance is a bit tight, but some fish paper on the back of the PCB will solve that concern. I'll update when the build is done, and once I see how many months it will run on this beefy 6Ah boy.Show Image(https://i.imgur.com/FjsGsiG.jpg)
Just FYI, according to the listed dimensions, that battery is too thick to fit the case.
Post by: Oatburner on Mon, 10 June 2019, 09:46:06
Waiting on my DHL order to get picked up, but in the mean time, here's the battery I got. Digi-Key p/n 1908-1377-ND. The clearance is a bit tight, but some fish paper on the back of the PCB will solve that concern. I'll update when the build is done, and once I see how many months it will run on this beefy 6Ah boy.Show Image(https://i.imgur.com/FjsGsiG.jpg)
Just FYI, according to the listed dimensions, that battery is too thick to fit the case.
Post by: jrfhoutx on Mon, 10 June 2019, 09:54:05
I measured before ordering and found that it has enough clearance if it’s positioned closer to the rounded part of the case where it’s more spacious. I’ll double check with the actual battery later, hopefully I didn’t make an error when measuring.Waiting on my DHL order to get picked up, but in the mean time, here's the battery I got. Digi-Key p/n 1908-1377-ND. The clearance is a bit tight, but some fish paper on the back of the PCB will solve that concern. I'll update when the build is done, and once I see how many months it will run on this beefy 6Ah boy.Show Image(https://i.imgur.com/FjsGsiG.jpg)
Just FYI, according to the listed dimensions, that battery is too thick to fit the case.
the actual battery may be a little smaller than the spec states, but I printed out a mockup last night and couldn't close the case, even with the battery placed all the way up against the back of the case and in between the screw posts for the back cover.
Post by: Vizir on Mon, 10 June 2019, 09:56:55
Where are these dimensions listed?Waiting on my DHL order to get picked up, but in the mean time, here's the battery I got. Digi-Key p/n 1908-1377-ND. The clearance is a bit tight, but some fish paper on the back of the PCB will solve that concern. I'll update when the build is done, and once I see how many months it will run on this beefy 6Ah boy.Show Image(https://i.imgur.com/FjsGsiG.jpg)
Just FYI, according to the listed dimensions, that battery is too thick to fit the case.
Sent from my Pixel 2 using Tapatalk
Post by: jrfhoutx on Mon, 10 June 2019, 11:26:05
Where are these dimensions listed?Waiting on my DHL order to get picked up, but in the mean time, here's the battery I got. Digi-Key p/n 1908-1377-ND. The clearance is a bit tight, but some fish paper on the back of the PCB will solve that concern. I'll update when the build is done, and once I see how many months it will run on this beefy 6Ah boy.Show Image(https://i.imgur.com/FjsGsiG.jpg)
Just FYI, according to the listed dimensions, that battery is too thick to fit the case.
Sent from my Pixel 2 using Tapatalk
https://www.digikey.com/product-detail/en/jauch-quartz/LP906090JH-PCM-WIRES-70MM/1908-1377-ND/9560999
3.62" L x 2.38" W x 0.39" H (92.0mm x 60.5mm x 9.9mm)
Post by: ZyBeR on Mon, 10 June 2019, 11:34:50
I've seen several issues:
1. After waking the computer up the keyboard don't work, the led list is red and no keystrokes are registered.
2. Sometimes when unlocking it just sends keystrokes (never stops) without me ev touching it.
3. Every once in a while I feel keystrokes are missed. This has already happened three times just typing t(four now)his text.
Post by: Vizir on Mon, 10 June 2019, 14:40:13
I meant the free space dimensions in the cad66Where are these dimensions listed?Waiting on my DHL order to get picked up, but in the mean time, here's the battery I got. Digi-Key p/n 1908-1377-ND. The clearance is a bit tight, but some fish paper on the back of the PCB will solve that concern. I'll update when the build is done, and once I see how many months it will run on this beefy 6Ah boy.Show Image(https://i.imgur.com/FjsGsiG.jpg)
Just FYI, according to the listed dimensions, that battery is too thick to fit the case.
Sent from my Pixel 2 using Tapatalk
https://www.digikey.com/product-detail/en/jauch-quartz/LP906090JH-PCM-WIRES-70MM/1908-1377-ND/9560999
3.62" L x 2.38" W x 0.39" H (92.0mm x 60.5mm x 9.9mm)
Sent from my Pixel 2 using Tapatalk
Post by: Oatburner on Mon, 10 June 2019, 16:55:25
I measured before ordering and found that it has enough clearance if it’s positioned closer to the rounded part of the case where it’s more spacious. I’ll double check with the actual battery later, hopefully I didn’t make an error when measuring.Waiting on my DHL order to get picked up, but in the mean time, here's the battery I got. Digi-Key p/n 1908-1377-ND. The clearance is a bit tight, but some fish paper on the back of the PCB will solve that concern. I'll update when the build is done, and once I see how many months it will run on this beefy 6Ah boy.Show Image(https://i.imgur.com/FjsGsiG.jpg)
Just FYI, according to the listed dimensions, that battery is too thick to fit the case.
the actual battery may be a little smaller than the spec states, but I printed out a mockup last night and couldn't close the case, even with the battery placed all the way up against the back of the case and in between the screw posts for the back cover.
Post by: jrfhoutx on Mon, 10 June 2019, 17:18:25
I meant the free space dimensions in the cad66Where are these dimensions listed?Waiting on my DHL order to get picked up, but in the mean time, here's the battery I got. Digi-Key p/n 1908-1377-ND. The clearance is a bit tight, but some fish paper on the back of the PCB will solve that concern. I'll update when the build is done, and once I see how many months it will run on this beefy 6Ah boy.Show Image(https://i.imgur.com/FjsGsiG.jpg)
Just FYI, according to the listed dimensions, that battery is too thick to fit the case.
Sent from my Pixel 2 using Tapatalk
https://www.digikey.com/product-detail/en/jauch-quartz/LP906090JH-PCM-WIRES-70MM/1908-1377-ND/9560999
3.62" L x 2.38" W x 0.39" H (92.0mm x 60.5mm x 9.9mm)
Sent from my Pixel 2 using Tapatalk
there aren't any afaik. I have a R1 board and a 3d printer, so to find a good battery, I just take the dimensions of the battery I'm considering, model it real quick (takes like 2 minutes in fusion360), print it out, and then stick it inside the case and see if it fits.
Post by: Vizir on Mon, 10 June 2019, 17:21:52
I meant the free space dimensions in the cad66Where are these dimensions listed?Waiting on my DHL order to get picked up, but in the mean time, here's the battery I got. Digi-Key p/n 1908-1377-ND. The clearance is a bit tight, but some fish paper on the back of the PCB will solve that concern. I'll update when the build is done, and once I see how many months it will run on this beefy 6Ah boy.Show Image(https://i.imgur.com/FjsGsiG.jpg)
Just FYI, according to the listed dimensions, that battery is too thick to fit the case.
Sent from my Pixel 2 using Tapatalk
https://www.digikey.com/product-detail/en/jauch-quartz/LP906090JH-PCM-WIRES-70MM/1908-1377-ND/9560999
3.62" L x 2.38" W x 0.39" H (92.0mm x 60.5mm x 9.9mm)
Sent from my Pixel 2 using Tapatalk
there aren't any afaik. I have a R1 board and a 3d printer, so to find a good battery, I just take the dimensions of the battery I'm considering, model it real quick (takes like 2 minutes in fusion360), print it out, and then stick it inside the case and see if it fits.
so, which battery are you going with?
Post by: cijanzen on Mon, 10 June 2019, 17:45:40
https://m.aliexpress.com/item/32664444232.html?spm=a2g0n.orderlist-amp.item.32664444232&aff_trace_key=862d8275957b4f9d8c8270a30bee3d45-1556375710764-00627-UneMJZVf&aff_platform=msite&m_page_id=6463amp-asGgtTM4X_KiRI9MoaIW8A1560206629176
Post by: Lvlc on Mon, 10 June 2019, 21:44:59
I can connect on Windows 10, but the keystrokes have lag and either don't register or repeat many times.
Post by: redjarojam on Mon, 10 June 2019, 23:01:27
Post by: Vizir on Mon, 10 June 2019, 23:16:00
In my little bag of extras, I have the daughter board for usb, ribbon, washers for screw in stabs and a piece that has 5 little rectangles with yellow dots. I am ignorant as to what that is for. Can someone help me out?The white pieces with yellow circles are spare LEDs
Sent from my Pixel 2 using Tapatalk
Post by: abcgel on Tue, 11 June 2019, 05:00:53
Post by: Lyle88 on Tue, 11 June 2019, 06:52:43
Thank you for this. Love it!The WS2 white matches the case really well!
Sent from my Pixel XL using Tapatalk
Post by: Jonathan0903 on Tue, 11 June 2019, 07:52:27
Is there a bluetooth driver for Windows 10? Bluetooth connection seems fine with Linux Debian 9 and Android, but completely unusable on Windows 10.
I can connect on Windows 10, but the keystrokes have lag and either don't register or repeat many times.
That may be a problem specific to your hardware. I've used the board on 3 seperate computers, all running Windows 10 with no problems so far. Try updating your drivers through Windows update, or disabling and then reenabling your bluetooth chipset from the device manager.
Post by: redjarojam on Tue, 11 June 2019, 09:36:00
In my little bag of extras, I have the daughter board for usb, ribbon, washers for screw in stabs and a piece that has 5 little rectangles with yellow dots. I am ignorant as to what that is for. Can someone help me out?The white pieces with yellow circles are spare LEDs
Sent from my Pixel 2 using Tapatalk
Thanks.
Post by: Vizir on Tue, 11 June 2019, 09:38:55
You understand what the rest are for, right?In my little bag of extras, I have the daughter board for usb, ribbon, washers for screw in stabs and a piece that has 5 little rectangles with yellow dots. I am ignorant as to what that is for. Can someone help me out?The white pieces with yellow circles are spare LEDs
Sent from my Pixel 2 using Tapatalk
Thanks.
Sent from my Pixel 2 using Tapatalk
Post by: 5inn3d- on Tue, 11 June 2019, 11:25:01
Post by: Choobies on Tue, 11 June 2019, 12:16:18
are extra plates available for purchase??
I believe extras will be posted at their site when parts are available.
https://play-keyboard.store/collections/group-buys/products/ca66-extra-parts?variant=18700312543350 (https://play-keyboard.store/collections/group-buys/products/ca66-extra-parts?variant=18700312543350)
Post by: ideus on Tue, 11 June 2019, 14:00:59
Post by: Vizir on Tue, 11 June 2019, 14:02:52
Are the website GB's dates for 2018, or are they current?2018. They are being delivered now.
Sent from my Pixel 2 using Tapatalk
Post by: ideus on Tue, 11 June 2019, 14:09:05
Are the website GB's dates for 2018, or are they current?2018. They are being delivered now.
Sent from my Pixel 2 using Tapatalk
Thank you for the feedback. It appears that the set can still be bought at the website. I hope for a third round.
Post by: Lvlc on Tue, 11 June 2019, 17:13:35
Is there a bluetooth driver for Windows 10? Bluetooth connection seems fine with Linux Debian 9 and Android, but completely unusable on Windows 10.
I can connect on Windows 10, but the keystrokes have lag and either don't register or repeat many times.
That may be a problem specific to your hardware. I've used the board on 3 seperate computers, all running Windows 10 with no problems so far. Try updating your drivers through Windows update, or disabling and then reenabling your bluetooth chipset from the device manager.
You were right, it was a hardware issue. Figured it out by changing the bluetooth adapter.
Post by: King4477 on Tue, 11 June 2019, 20:37:28
Post by: Lyle88 on Tue, 11 June 2019, 20:42:03
Is anyone else having an issue with their Bluetooth PCB disconnecting itself and quickly re-connecting over a wired connection? I have not connected to any Bluetooth devices yet, and have tried turning off Bluetooth but the issue persists. It also happens with different laptops and with different USB cables.Are you using the correct firmware (CAD66) from ydkb.io?
http://ydkb.io/?cad66
Sent from my Pixel XL using Tapatalk
Post by: King4477 on Tue, 11 June 2019, 20:47:36
Is anyone else having an issue with their Bluetooth PCB disconnecting itself and quickly re-connecting over a wired connection? I have not connected to any Bluetooth devices yet, and have tried turning off Bluetooth but the issue persists. It also happens with different laptops and with different USB cables.Are you using the correct firmware (CAD66) from ydkb.io?
http://ydkb.io/?cad66
Sent from my Pixel XL using Tapatalk
Yes sure am. I think in an earlier post Barry mentioned firmware updates but am not certain if this is firmware or hardware related, perhaps a poor power connection.
Post by: EvilemX8 on Tue, 11 June 2019, 20:49:29
Post by: Lyle88 on Tue, 11 June 2019, 20:52:28
Have you tried using the board outside of the case? I haven't gotten round to using my BT board but I'm a bit sceptical of how reliable the connection will be, considering the placement of the module and the amount of alu almost completely surrounding itIs anyone else having an issue with their Bluetooth PCB disconnecting itself and quickly re-connecting over a wired connection? I have not connected to any Bluetooth devices yet, and have tried turning off Bluetooth but the issue persists. It also happens with different laptops and with different USB cables.Are you using the correct firmware (CAD66) from ydkb.io?
http://ydkb.io/?cad66
Sent from my Pixel XL using Tapatalk
Yes sure am. I think in an earlier post Barry mentioned firmware updates but am not certain if this is firmware or hardware related, perhaps a poor power connection.
Sent from my Pixel XL using Tapatalk
Post by: King4477 on Tue, 11 June 2019, 21:21:23
Have you tried using the board outside of the case? I haven't gotten round to using my BT board but I'm a bit sceptical of how reliable the connection will be, considering the placement of the module and the amount of alu almost completely surrounding itIs anyone else having an issue with their Bluetooth PCB disconnecting itself and quickly re-connecting over a wired connection? I have not connected to any Bluetooth devices yet, and have tried turning off Bluetooth but the issue persists. It also happens with different laptops and with different USB cables.Are you using the correct firmware (CAD66) from ydkb.io?
http://ydkb.io/?cad66
Sent from my Pixel XL using Tapatalk
Yes sure am. I think in an earlier post Barry mentioned firmware updates but am not certain if this is firmware or hardware related, perhaps a poor power connection.
Sent from my Pixel XL using Tapatalk
I noticed the same issue while outside the case too. Come to think of it, I think I had the same problem with one of my R1 PCB daughter boards, and swapping the daughter board got it working. I only have the one BT PCB daughter board however so some more in depth troubleshooting is in my future.
Post by: King4477 on Tue, 11 June 2019, 21:22:06
Yea I am also having the same disconnection and reconnection issue on Bluetooth. He told me to tape the connector, which I did. I also looked at my DIY ZapCables and resoldered everything - it works on every other one of my boards, and my phone, even when i wiggle it like crazy. So I think the issue is definitely isolated to the Bluetooth PCB. I'm going to take a look at the daughter board at some point, and see if some points may need solder.
+1
Will let you know if I find anything
Post by: PlayKeyboardTW on Wed, 12 June 2019, 00:51:26
Have you tried using the board outside of the case? I haven't gotten round to using my BT board but I'm a bit sceptical of how reliable the connection will be, considering the placement of the module and the amount of alu almost completely surrounding itIs anyone else having an issue with their Bluetooth PCB disconnecting itself and quickly re-connecting over a wired connection? I have not connected to any Bluetooth devices yet, and have tried turning off Bluetooth but the issue persists. It also happens with different laptops and with different USB cables.Are you using the correct firmware (CAD66) from ydkb.io?
http://ydkb.io/?cad66
Sent from my Pixel XL using Tapatalk
Yes sure am. I think in an earlier post Barry mentioned firmware updates but am not certain if this is firmware or hardware related, perhaps a poor power connection.
Sent from my Pixel XL using Tapatalk
I noticed the same issue while outside the case too. Come to think of it, I think I had the same problem with one of my R1 PCB daughter boards, and swapping the daughter board got it working. I only have the one BT PCB daughter board however so some more in depth troubleshooting is in my future.
If some of you still face the same problem, please check some following points:
1. Test wire mode without battery plugged in.
2. Make sure there are no positions shortened.
3. There is a small space beside connector and case, but still there's a chance of it being the problem.
Also, bottom row will be very close to bottom plate when bottom plate is been screwed up.
Make sure bottom row switch pings don't connect with bottom plate.
4. Making sure grounding wires in your house are connected properly and correctly.
If not, it will also cause the problem.
Are the website GB's dates for 2018, or are they current?2018. They are being delivered now.
Sent from my Pixel 2 using Tapatalk
Thank you for the feedback. It appears that the set can still be bought at the website. I hope for a third round.
There won't be. Sorry. :(
Post by: ZyBeR on Wed, 12 June 2019, 11:49:25
I've tested several different cables and all have the same issue on my MacBook Pro (late 2018) and all of them work on my PC with Windows 10..
On my Mac, half of the times I connect the led strip lights up solid and half it won't light up at all. Only a few times the keyboard actually boots up and connects.
I haven't tried with Bluetooth as I don't have a battery.
Post by: cijanzen on Wed, 12 June 2019, 12:55:02
I'm I the only one having connection issus in OS X?
I've tested several different cables and all have the same issue on my MacBook Pro (late 2018) and all of them work on my PC with Windows 10..
On my Mac, half of the times I connect the led strip lights up solid and half it won't light up at all. Only a few times the keyboard actually boots up and connects.
I haven't tried with Bluetooth as I don't have a battery.
No problems on my end with BT PCB. Running Mojave with USB-A port MacBook Pro.
Post by: Lyle88 on Thu, 13 June 2019, 17:20:44
https://www.jaycar.com.au/18650-rechargeable-li-ion-battery-2600mah-3-7v/p/SB2308
Edit: I just want to know if the board is supposed to have a 'protected' cell, or 'unprotected' cell
Post by: jrfhoutx on Thu, 13 June 2019, 17:29:19
Can anyone tell me, would this battery be suitable? - the website says it is an "unprotected cell" and I'm not sure if that matters on this board. Any help appreciated
https://www.jaycar.com.au/18650-rechargeable-li-ion-battery-2600mah-3-7v/p/SB2308
Edit: assuming the size is ok, I'm just interested in whether the battery is ok
A protected cell just means that there’s a circuit attached to prevent over charging and over discharging.
Whether or not it’s ok for this application, idk, because idk what kind of charging circuit or protection is designed into the pcb.
Post by: EvilemX8 on Fri, 14 June 2019, 18:42:26
Post by: Choobies on Fri, 14 June 2019, 19:55:36
Anyone have news how to fix the intermittent disconnection issue?
I am having the same issue with the BT pcb while it is plugged in.
Post by: PlayKeyboardTW on Sat, 15 June 2019, 00:43:59
If you have any issue when building it, you might want to check it.
Guide for BT PCB will be out soon after we finishing a build service for a customer.
And some official photos here for white case, feat GMK Chocolatier.
[attach=1][attach=2]
[attach=3][attach=4]
[attach=5][attach=6]
[attach=7]
Post by: Lyle88 on Sat, 15 June 2019, 04:31:41
Sent from my Pixel XL using Tapatalk
Post by: nulltorious on Sat, 15 June 2019, 04:55:16
Post by: Lyle88 on Sat, 15 June 2019, 05:52:05
Looks like the legs of the switches you are using is to fat to seat all the way in the PCB. You can try clipping the legs. I had this problem with zeal switches in another build and went with MX black instead.I have already tested the switches in the PCB and plate separately and they are fine. The reason it won't fit through the plate and PCB together is because the plate seems to be poorly cut and forces the switches on to an angle to reach the PCB holes. I had the same issue with my alu plate and have to desolder then file the plate so I figured maybe it's a common problem since it's happened on both my plates.(https://uploads.tapatalk-cdn.com/20190615/9a670ab2a31a93321c89572b678b176d.jpg)(https://uploads.tapatalk-cdn.com/20190615/d98800a65fa323b25e3c691a5aa39f85.jpg)(https://uploads.tapatalk-cdn.com/20190615/a1bc524a70f1e955c23ce7f9cf16a96f.jpg)
Sent from my Pixel XL using Tapatalk
Post by: Oatburner on Sun, 16 June 2019, 08:12:58
Post by: konstantin on Sun, 16 June 2019, 13:59:39
Post by: ganymede on Tue, 18 June 2019, 19:14:50
Anyone have news how to fix the intermittent disconnection issue?
I am having the same issue with the BT pcb while it is plugged in.
I am also having intermittent disconnection issues with BT PCB while it's plugged in via USB. Additionally, a slew of random number characters was dumped into an email I was typing today. Running MacOS Mojave on a MBP, plugged into an outlet.
Post by: ZyBeR on Wed, 19 June 2019, 00:46:14
Post by: DoCallMeKing on Wed, 19 June 2019, 14:07:53
Let me know. Thanks a lot.
Post by: nulltorious on Wed, 19 June 2019, 21:46:01
Anyone have an extra plate they’d be willing to sell? I have a ton of verified trades on mechmarket.
Let me know. Thanks a lot.
I sent you a PM, I have an extra plate you can have for retail.
Post by: 5inn3d- on Thu, 20 June 2019, 12:24:21
Anyone have an extra plate they’d be willing to sell? I have a ton of verified trades on mechmarket.
Let me know. Thanks a lot.
I sent you a PM, I have an extra plate you can have for retail.
let me know if he decides not to take it off you. :)
Post by: EvilemX8 on Thu, 20 June 2019, 12:37:34
Post by: Taques on Thu, 20 June 2019, 15:24:51
I need some Pro tips if anyone can help. I have just checked to see if I can fit switches on each corner of my brass plate with the BT PCB but once I get the switches in on one side, the switches on the other side are about 1-1.5mm out of alignment. I have tried flexing the plate a bit to get the switches into the PCB but had no luck. Hoping for some suggestions as I don't really want to take a file to this plate too...Show Image(https://uploads.tapatalk-cdn.com/20190615/5571c4f01e7ef3948221471a63bbbcc4.jpg)Show Image(https://uploads.tapatalk-cdn.com/20190615/2508545c3838fd3c591f75943b51b407.jpg)Show Image(https://uploads.tapatalk-cdn.com/20190615/1d5f33c6f56d2da7cbc2aa6e385566cb.jpg)
Sent from my Pixel XL using Tapatalk
I'm having the exact same problem with the brass plates. Have to say that I am pretty disappointed.
Post by: Photoelectric on Thu, 20 June 2019, 17:30:07
I need some Pro tips if anyone can help. I have just checked to see if I can fit switches on each corner of my brass plate with the BT PCB but once I get the switches in on one side, the switches on the other side are about 1-1.5mm out of alignment. I have tried flexing the plate a bit to get the switches into the PCB but had no luck. Hoping for some suggestions as I don't really want to take a file to this plate too...Show Image(https://uploads.tapatalk-cdn.com/20190615/5571c4f01e7ef3948221471a63bbbcc4.jpg)Show Image(https://uploads.tapatalk-cdn.com/20190615/2508545c3838fd3c591f75943b51b407.jpg)Show Image(https://uploads.tapatalk-cdn.com/20190615/1d5f33c6f56d2da7cbc2aa6e385566cb.jpg)
Sent from my Pixel XL using Tapatalk
Are you aligning the PCB upside-down? Looking at the first photograph, you might be. The RGB LEDs should be facing up, through the long rectangular slit in the plate, not downward. I don't have a BT PCB, only standard, but looking at mine the RGB LEDs are oriented facing up and key labels are also on the top side. SMD soldered stuff like controller and such should be facing under the PCB.
Post by: jrfhoutx on Thu, 20 June 2019, 19:40:15
I need some Pro tips if anyone can help. I have just checked to see if I can fit switches on each corner of my brass plate with the BT PCB but once I get the switches in on one side, the switches on the other side are about 1-1.5mm out of alignment. I have tried flexing the plate a bit to get the switches into the PCB but had no luck. Hoping for some suggestions as I don't really want to take a file to this plate too...Show Image(https://uploads.tapatalk-cdn.com/20190615/5571c4f01e7ef3948221471a63bbbcc4.jpg)Show Image(https://uploads.tapatalk-cdn.com/20190615/2508545c3838fd3c591f75943b51b407.jpg)Show Image(https://uploads.tapatalk-cdn.com/20190615/1d5f33c6f56d2da7cbc2aa6e385566cb.jpg)
Sent from my Pixel XL using Tapatalk
Are you aligning the PCB upside-down? Looking at the first photograph, you might be. The RGB LEDs should be facing up, through the long rectangular slit in the plate, not downward. I don't have a BT PCB, only standard, but looking at mine the RGB LEDs are oriented facing up and key labels are also on the top side. SMD soldered stuff like controller and such should be facing under the PCB.
Yes, that is the correct orientation. That's a BT PCB, the LEDs are soldered to the back of the pcb and shine through cutouts in the pcb. If you look at the reflection in the brass, you can see the silkscreen for the switch footprints showing that it's the correct orientation.
Post by: Photoelectric on Thu, 20 June 2019, 21:08:03
Post by: zqs1qiwan on Thu, 20 June 2019, 21:48:56
Post by: tex_live_utility on Thu, 20 June 2019, 21:53:51
It's a handsome keyboard otherwise.
(https://i.imgur.com/lYO1ciG.jpg)
(https://i.imgur.com/Qjri6p4.jpg)
(https://i.imgur.com/VAUw49f.jpg)
Post by: jariss on Fri, 21 June 2019, 01:06:10
Post by: topherrehpot on Sat, 22 June 2019, 14:28:21
Post by: lukelex on Sat, 22 June 2019, 15:05:09
Sent from my SM-G975F using Tapatalk
Post by: topherrehpot on Sat, 22 June 2019, 18:31:54
Always pcb mount.
Sent from my SM-G975F using Tapatalk
Yep ok. Only reason I had that in mind was I accidentally bought plate mount and now have a set laying around. Anyway, bought a set of GMK screw in stabs from 1up.
Post by: lukelex on Sat, 22 June 2019, 19:02:24
You should by from Faxe. He has the cheapest gmk screw in stabs in the world.Always pcb mount.
Sent from my SM-G975F using Tapatalk
Yep ok. Only reason I had that in mind was I accidentally bought plate mount and now have a set laying around. Anyway, bought a set of GMK screw in stabs from 1up.
Sent from my SM-G975F using Tapatalk
Post by: Vizir on Sat, 22 June 2019, 20:08:23
Sent from my Pixel 2 using Tapatalk
Post by: PlayKeyboardTW on Mon, 24 June 2019, 22:41:21
Link: http://bit.ly/2X2cJsp (http://bit.ly/2X2cJsp)
We know some of you are encountering disconnecting issue, and we have some boards with BT PCBs awaiting for us to assemble.
Please give us some time to test them to see if we will meet same problems.
But we guess it's more about the grounding problem of buildings. Since the connector is a bit touched with wall of connector opening.
I myself did face the same issue when using Tex Yoda 2 as well, which it's connector is in the same situation.
And here are some photos of a purple case with SA Grand Budapest. We assume some of you might remember this combo showing in first round. ;)
[attach=1][attach=2][attach=3]
[attach=4][attach=5][attach=6]
Post by: PlayKeyboardTW on Mon, 24 June 2019, 22:42:31
Well, I got mine... including 2 factory-installed scuffs on the top and a missing screw! This matte anodizing seems relatively fragile.
It's a handsome keyboard otherwise.Show Image(https://i.imgur.com/lYO1ciG.jpg)Show Image(https://i.imgur.com/Qjri6p4.jpg)Show Image(https://i.imgur.com/VAUw49f.jpg)
Please contact us for after sale service. Thanks. :)
Post by: jrfhoutx on Mon, 24 June 2019, 23:10:48
https://geekhack.org/index.php?topic=98821.msg2707635#msg2707635
Post by: PlayKeyboardTW on Tue, 25 June 2019, 01:18:04
Since BIOI G60 BLE is going to be running QMK/VIA and uses the same BTLE module as the CAD66, will the CAD66 be getting ported to QMK now as well?
https://geekhack.org/index.php?topic=98821.msg2707635#msg2707635
No, they are from different maker.
It will be great if anyone can do it since we do not design PCBs ourselves.
Post by: PlayKeyboardTW on Tue, 25 June 2019, 01:29:05
Just made another building & flashing guide for Bluetooth PCB. :)
Link: http://bit.ly/2X2cJsp (http://bit.ly/2X2cJsp)
We know some of you are encountering disconnecting issue, and we have some boards with BT PCBs awaiting for us to assemble.
Please give us some time to test them to see if we will meet same problems.
But we guess it's more about the grounding problem of buildings. Since the connector is a bit touched with wall of connector opening.
I myself did face the same issue when using Tex Yoda 2 as well, which it's connector is in the same situation.
And here are some photos of a purple case with SA Grand Budapest. We assume some of you might remember this combo showing in first round. ;)
(Attachment Link) (Attachment Link) (Attachment Link)
(Attachment Link) (Attachment Link) (Attachment Link)
Quick update here. We just had a talk with PCB maker.
The reconnecting might be caused by some preceding checking process of keyboard.
He had modified the process and just updated the newest firmware to the site.
If you are facing this problem, please remake a hex file and flash it into your keyboard again.
Thanks. :thumb:
Post by: Wojciech on Tue, 25 June 2019, 02:44:52
Are all orders already shipped? I can't wait to build my CA66 but I need this Alps plate file to order a cutout.I apologize for my impatience :)
Post by: PlayKeyboardTW on Tue, 25 June 2019, 05:44:43
Hello
Are all orders already shipped? I can't wait to build my CA66 but I need this Alps plate file to order a cutout.I apologize for my impatience :)
Here are two plates of this round: http://bit.ly/2J60v8e (http://bit.ly/2J60v8e)
Sorry for the waiting. :)
Post by: Wojciech on Tue, 25 June 2019, 09:06:36
Post by: King4477 on Tue, 25 June 2019, 10:11:57
Just made another building & flashing guide for Bluetooth PCB. :)
Link: http://bit.ly/2X2cJsp (http://bit.ly/2X2cJsp)
We know some of you are encountering disconnecting issue, and we have some boards with BT PCBs awaiting for us to assemble.
Please give us some time to test them to see if we will meet same problems.
But we guess it's more about the grounding problem of buildings. Since the connector is a bit touched with wall of connector opening.
I myself did face the same issue when using Tex Yoda 2 as well, which it's connector is in the same situation.
And here are some photos of a purple case with SA Grand Budapest. We assume some of you might remember this combo showing in first round. ;)
(Attachment Link) (Attachment Link) (Attachment Link)
(Attachment Link) (Attachment Link) (Attachment Link)
Quick update here. We just had a talk with PCB maker.
The reconnecting might be caused by some preceding checking process of keyboard.
He had modified the process and just updated the newest firmware to the site.
If you are facing this problem, please remake a hex file and flash it into your keyboard again.
Thanks. :thumb:
Thanks Barry. I have updated to a new hex file with new firmware, but I am still experiencing disconnects and reconnects. It happens every 30 minutes or so, which I feel is less frequent than it had been prior to updating to the new firmware, but nonetheless it is still occurring, unfortunately.
Post by: hottrout on Tue, 25 June 2019, 11:07:38
Post by: King4477 on Tue, 25 June 2019, 12:05:56
Just made another building & flashing guide for Bluetooth PCB. :)
Link: http://bit.ly/2X2cJsp (http://bit.ly/2X2cJsp)
We know some of you are encountering disconnecting issue, and we have some boards with BT PCBs awaiting for us to assemble.
Please give us some time to test them to see if we will meet same problems.
But we guess it's more about the grounding problem of buildings. Since the connector is a bit touched with wall of connector opening.
I myself did face the same issue when using Tex Yoda 2 as well, which it's connector is in the same situation.
And here are some photos of a purple case with SA Grand Budapest. We assume some of you might remember this combo showing in first round. ;)
(Attachment Link) (Attachment Link) (Attachment Link)
(Attachment Link) (Attachment Link) (Attachment Link)
Quick update here. We just had a talk with PCB maker.
The reconnecting might be caused by some preceding checking process of keyboard.
He had modified the process and just updated the newest firmware to the site.
If you are facing this problem, please remake a hex file and flash it into your keyboard again.
Thanks. :thumb:
Thanks Barry. I have updated to a new hex file with new firmware, but I am still experiencing disconnects and reconnects. It happens every 30 minutes or so, which I feel is less frequent than it had been prior to updating to the new firmware, but nonetheless it is still occurring, unfortunately.
After a series of disconnects, my laptop has now decided that this keyboard is a touchpad. Still works on my desktop, for now.
Post by: topherrehpot on Tue, 25 June 2019, 16:09:55
Just made another building & flashing guide for Bluetooth PCB. :)
Link: http://bit.ly/2X2cJsp (http://bit.ly/2X2cJsp)
We know some of you are encountering disconnecting issue, and we have some boards with BT PCBs awaiting for us to assemble.
Please give us some time to test them to see if we will meet same problems.
But we guess it's more about the grounding problem of buildings. Since the connector is a bit touched with wall of connector opening.
I myself did face the same issue when using Tex Yoda 2 as well, which it's connector is in the same situation.
And here are some photos of a purple case with SA Grand Budapest. We assume some of you might remember this combo showing in first round. ;)
(Attachment Link) (Attachment Link) (Attachment Link)
(Attachment Link) (Attachment Link) (Attachment Link)
Damn that's hot! Where do you get the RGB square thingy for lighting up the Esc key?
Post by: Lyle88 on Tue, 25 June 2019, 17:18:28
Why did I not see this in time ....... :( This is the nicest looking board ever.I'm considering selling mine, but I'm in AU so if you're in the US postage might be a killer
Sent from my Pixel XL using Tapatalk
Post by: hottrout on Wed, 26 June 2019, 04:45:29
Why did I not see this in time ....... :( This is the nicest looking board ever.I'm considering selling mine, but I'm in AU so if you're in the US postage might be a killer
Sent from my Pixel XL using Tapatalk
I am in the UK and would pay the postage. What was your order (you can PM if you wish)
Post by: Lyle88 on Wed, 26 June 2019, 04:50:31
I got a white hhkb version, titanium badge, regular & bt pcb's, silver alu plate & brass plate.Why did I not see this in time ....... :( This is the nicest looking board ever.I'm considering selling mine, but I'm in AU so if you're in the US postage might be a killer
Sent from my Pixel XL using Tapatalk
I am in the UK and would pay the postage. What was your order (you can PM if you wish)
My plates weren't cut properly so I'm waiting on replacements.
I've also built it with sakurios and cbf desoldering them so will be selling with.
Once I know what's happening with the plates I'll make a decision and pm you to see if you're still looking
Sent from my Pixel XL using Tapatalk
Post by: hottrout on Wed, 26 June 2019, 04:52:18
I got a white hhkb version, titanium badge, regular & bt pcb's, silver alu plate & brass plate.Why did I not see this in time ....... :( This is the nicest looking board ever.I'm considering selling mine, but I'm in AU so if you're in the US postage might be a killer
Sent from my Pixel XL using Tapatalk
I am in the UK and would pay the postage. What was your order (you can PM if you wish)
My plates weren't cut properly so I'm waiting on replacements.
I've also built it with sakurios and cbf desoldering them so will be selling with.
Once I know what's happening with the plates I'll make a decision and pm you to see if you're still looking
Sent from my Pixel XL using Tapatalk
Great, I will wait on that message.
Post by: Shell058 on Thu, 27 June 2019, 07:55:47
Also the right column appears to have died, will be checking the connections this weekend to see if I can fix that. At least most of the keys still work after unplugging/replugging! Will be very disappointed if I have to (re)build this board for a fourth time.
Post by: Eclips4x on Fri, 28 June 2019, 01:10:59
Post by: coffeeshopcoder on Fri, 28 June 2019, 02:21:46
(https://i.ibb.co/vwCXN7Q/F012-C5-E7-7459-44-E3-9-A28-C1-E1024-FACF1.jpg)
https://ibb.co/w0Zcn9w
Is this fixable ? I have not soldered any smd components in the past .
Anyone has any words of advice ? Should I be asking for a pcb replacement ?
Post by: Lyle88 on Fri, 28 June 2019, 02:24:50
I got mine a few weeks back, but IRL work kept me busy. Finally was about to build and was checking the pcb before soldering , I notice that one of the less had come off, likely in shipping .It's difficult to see in the photo but it looks kinda like it has pulled off the pads with it. Can you take a closer photo?Show Image(https://i.ibb.co/vwCXN7Q/F012-C5-E7-7459-44-E3-9-A28-C1-E1024-FACF1.jpg)
https://ibb.co/w0Zcn9w
Is this fixable ? I have not soldered any smd components in the past .
Anyone has any words of advice ? Should I be asking for a pcb replacement ?
Sent from my Pixel XL using Tapatalk
Post by: Vizir on Fri, 28 June 2019, 14:37:32
edit: nvm. looks like the site is not registering: http://test.ydkb.io/
the keys are working
Post by: nill on Tue, 02 July 2019, 12:33:24
Otherwise, board feels, sounds, and looks dope.
Post by: jrfhoutx on Tue, 02 July 2019, 13:39:26
I got mine a few weeks back, but IRL work kept me busy. Finally was about to build and was checking the pcb before soldering , I notice that one of the less had come off, likely in shipping .It's difficult to see in the photo but it looks kinda like it has pulled off the pads with it. Can you take a closer photo?Show Image(https://i.ibb.co/vwCXN7Q/F012-C5-E7-7459-44-E3-9-A28-C1-E1024-FACF1.jpg)
https://ibb.co/w0Zcn9w
Is this fixable ? I have not soldered any smd components in the past .
Anyone has any words of advice ? Should I be asking for a pcb replacement ?
Sent from my Pixel XL using Tapatalk
Yeah, that definitely pulled pads off with it. 1 at the very least, you can see part of a trace still attached to one of them
Post by: Shell058 on Wed, 03 July 2019, 04:24:28
Post by: EvilemX8 on Wed, 03 July 2019, 08:42:59
For people having the disconnecting/reconnecting issue, I added a piece of wire between the port and the case as shown in this M65-A post: https://geekhack.org/index.php?topic=86756.msg2611640#msg2611640 and it seems to have solved the issue! I used electrical tape instead of masking tape. My right column is also working again after unplugging and replugging the switches into the hotswap sockets. So far so good!
Wow, so one end of wire touching daughter board USB C port, other end touching part of case, and then tape it down?
Post by: jrfhoutx on Wed, 03 July 2019, 08:57:25
For people having the disconnecting/reconnecting issue, I added a piece of wire between the port and the case as shown in this M65-A post: https://geekhack.org/index.php?topic=86756.msg2611640#msg2611640 and it seems to have solved the issue! I used electrical tape instead of masking tape. My right column is also working again after unplugging and replugging the switches into the hotswap sockets. So far so good!
So the shield isn't grounded? smh.
For people having the disconnecting/reconnecting issue, I added a piece of wire between the port and the case as shown in this M65-A post: https://geekhack.org/index.php?topic=86756.msg2611640#msg2611640 and it seems to have solved the issue! I used electrical tape instead of masking tape. My right column is also working again after unplugging and replugging the switches into the hotswap sockets. So far so good!
Wow, so one end of wire touching daughter board USB C port, other end touching part of case, and then tape it down?
pretty much. you can solder one end of the wire to the port housing and then trap the other end under a screw on the housing and that would be a little more solid. taping a wire in place isn't the greatest idea, something with a slightly more solid mechanical connection is better, as it would give a more solid and stable electrical connection.
Post by: Shell058 on Thu, 04 July 2019, 02:47:51
Post by: Lyle88 on Thu, 04 July 2019, 03:09:20
Sent from my Pixel XL using Tapatalk
Post by: ZyBeR on Thu, 04 July 2019, 05:45:54
Any update on replacement parts?+1
Sent from my Pixel XL using Tapatalk
Post by: lukelex on Thu, 04 July 2019, 11:14:54
*2Any update on replacement parts?+1
Sent from my Pixel XL using Tapatalk
Sent from my SM-G975F using Tapatalk
Post by: jrfhoutx on Thu, 04 July 2019, 15:52:54
Any update on replacement parts?
Sent from my Pixel XL using Tapatalk
Or any extras for sale, or the replacements promised to be made available to R1 buyers?
Post by: Oatburner on Thu, 04 July 2019, 17:08:25
Post by: MisterKnife on Sun, 07 July 2019, 10:47:19
Post by: EvilemX8 on Sun, 07 July 2019, 10:56:03
Not sure why but my usb is reconnecting once every so often.. tried multiple cables... anybody run into this?
Refer to above comments, attach wire from USB port to any part of the case.
Post by: PlayKeyboardTW on Tue, 09 July 2019, 04:59:08
*2Any update on replacement parts?+1
Sent from my Pixel XL using Tapatalk
Sent from my SM-G975F using Tapatalk
We are still working on backup parts to be done at the moment.
Don't worry, we will finish all the services. :)
I'm also curious about status. My two orders have been marked as not yet picked up by DHL for about a month now.
Please pm us with your order number for finding the problem. :)
Post by: coffeeshopcoder on Tue, 09 July 2019, 10:36:45
I got mine a few weeks back, but IRL work kept me busy. Finally was about to build and was checking the pcb before soldering , I notice that one of the less had come off, likely in shipping .It's difficult to see in the photo but it looks kinda like it has pulled off the pads with it. Can you take a closer photo?Show Image(https://i.ibb.co/vwCXN7Q/F012-C5-E7-7459-44-E3-9-A28-C1-E1024-FACF1.jpg)
https://ibb.co/w0Zcn9w
Is this fixable ? I have not soldered any smd components in the past .
Anyone has any words of advice ? Should I be asking for a pcb replacement ?
Sent from my Pixel XL using Tapatalk
Yeah, that definitely pulled pads off with it. 1 at the very least, you can see part of a trace still attached to one of them
I pm’d playkeyboardtw, and they said they would ship me an led strip that can be soldered in to the board.
Waiting for a spare pcb too...
Post by: King4477 on Tue, 09 July 2019, 11:52:45
Not sure why but my usb is reconnecting once every so often.. tried multiple cables... anybody run into this?
Refer to above comments, attach wire from USB port to any part of the case.
FYI, I have tried this fix also, but with no luck.
Frankly, I’ve had four PCBs from this round and the last and they all have issues (some of which took months to show symptoms)—just something I’ve come to live with. Will probably just hand wire the thing sooner or later unless someone wants to make an aftermarket PCB.
Post by: jrfhoutx on Tue, 09 July 2019, 12:19:26
unless someone wants to make an aftermarket PCB.
I’m not saying that’s going to happen, but it might... maybe someone has just been waiting to see how this round of pcbs panned out before they finalized their design...
Post by: Vizir on Tue, 09 July 2019, 13:24:52
Sent from my Pixel 2 using Tapatalk
Post by: Rumblehotep on Tue, 09 July 2019, 16:17:57
Waiting on a battery to arrive but tentative about switching the wire leads around although I see why it needs to be done.
Why was it ever reversed on the pcb in the first place?
Post by: DoCallMeKing on Tue, 09 July 2019, 16:23:17
I actually have 2, 1 silver and 1 dark gray. Each of them is built with tealios.
I also have an extra pcb and plate that I will be including in the sale as well.
Let me know if you're interested. You can reach me through here, discord, or reddit.
Thanks!
Post by: anfledd on Tue, 09 July 2019, 17:18:24
I've been using my BT pcb without a battery for a month and while I do hear the occasional bing-bong over the speakers that usually indicates unplugged keyboard, I still haven't had typing ability cut out.
Waiting on a battery to arrive but tentative about switching the wire leads around although I see why it needs to be done.
Why was it ever reversed on the pcb in the first place?
Ah, good to know that it will work plugged in without the battery as I actually got two BT PCBs instead of one regular and one BT.
Post by: fer.real on Tue, 09 July 2019, 17:36:24
unless someone wants to make an aftermarket PCB.
I’m not saying that’s going to happen, but it might... maybe someone has just been waiting to see how this round of pcbs panned out before they finalized their design...
Does that person know the exact issue that is causing failures in the stock boards? I'd be hesitant to purchase an aftermarket board until the problem with the current ones is known.
Post by: jrfhoutx on Wed, 10 July 2019, 00:25:26
unless someone wants to make an aftermarket PCB.
I’m not saying that’s going to happen, but it might... maybe someone has just been waiting to see how this round of pcbs panned out before they finalized their design...
Does that person know the exact issue that is causing failures in the stock boards? I'd be hesitant to purchase an aftermarket board until the problem with the current ones is known.
No, but the issue happening in the oem pcbs is irrelevant in whether or not an aftermarket pcb would work. the only way that it would be relevant is if the aftermarket pcb were an exact clone of the oem pcb.then you're likely to have the same problems. but if it's a new design that simply uses the layout, then the issues the oem pcbs are having doesn't matter.
Think about any 60% pcb. if PCB A has issues, and someone new designs PCB B, do you get concerned that PCB B will have the same issues as PCB A? no, cause they're completely different pcbs, two different designs. yes they both work in the same cases, but they're not the same PCB with the same problems...
Post by: ZyBeR on Wed, 10 July 2019, 10:48:14
In the current firmware, is there any type of "tap dance" functionality?
Post by: riterdando on Wed, 10 July 2019, 15:32:41
There are components connecting both QMK positions now.
If I would like to use QMK I have to move the components, so that both YDKB positions are connected.
But how do I move them, via desoldering?
It does not look like they can be taken off without desoldering.
Post by: theo313 on Wed, 10 July 2019, 17:54:00
Post by: jrfhoutx on Wed, 10 July 2019, 17:55:35
According to the build guide there is an option on the PCB to select QMK or YDKB.
There are components connecting both QMK positions now.
If I would like to use QMK I have to move the components, so that both YDKB positions are connected.
But how do I move them, via desoldering?
It does not look like they can be taken off without desoldering.
Yeah, they’re just jumpers. You desolder them from the positions they’re in and move them or You can use almost anything to make the connection (reuse the component that’s there, use a bit of wire, a big solder blob, literally anything just to make the connection). Whichever set (qmk or ydkb) is not connected is the one that you have chosen to use. So if the components are on the qmk spots, you’re flashing ydkb hex files; if the components are on ydkb, you’re flashing qmk hex files.
Post by: ZyBeR on Wed, 10 July 2019, 22:29:39
Post by: rdg on Thu, 11 July 2019, 23:02:55
According to the build guide there is an option on the PCB to select QMK or YDKB.
There are components connecting both QMK positions now.
If I would like to use QMK I have to move the components, so that both YDKB positions are connected.
But how do I move them, via desoldering?
It does not look like they can be taken off without desoldering.
Yeah, they’re just jumpers. You desolder them from the positions they’re in and move them or You can use almost anything to make the connection (reuse the component that’s there, use a bit of wire, a big solder blob, literally anything just to make the connection). Whichever set (qmk or ydkb) is not connected is the one that you have chosen to use. So if the components are on the qmk spots, you’re flashing ydkb hex files; if the components are on ydkb, you’re flashing qmk hex files.
Has anyone actually gotten the default PCB from round 2 working properly with QMK?
I've moved the jumpers and flashed a hex compiled from latest QMK source and have several dead keys. B backspace, \|, up arrow, right arrow. If I switch the jumpers back and reflash the hex from ydkb, everything works.
Post by: jrfhoutx on Fri, 12 July 2019, 10:19:11
According to the build guide there is an option on the PCB to select QMK or YDKB.
There are components connecting both QMK positions now.
If I would like to use QMK I have to move the components, so that both YDKB positions are connected.
But how do I move them, via desoldering?
It does not look like they can be taken off without desoldering.
Yeah, they’re just jumpers. You desolder them from the positions they’re in and move them or You can use almost anything to make the connection (reuse the component that’s there, use a bit of wire, a big solder blob, literally anything just to make the connection). Whichever set (qmk or ydkb) is not connected is the one that you have chosen to use. So if the components are on the qmk spots, you’re flashing ydkb hex files; if the components are on ydkb, you’re flashing qmk hex files.
Has anyone actually gotten the default PCB from round 2 working properly with QMK?
I've moved the jumpers and flashed a hex compiled from latest QMK source and have several dead keys. B backspace, \|, up arrow, right arrow. If I switch the jumpers back and reflash the hex from ydkb, everything works.
No idea tbh, I didn’t get a default R2 pcb. I still had an extra R1 pcb that worked, so I just got a bt pcb, but haven’t built it yet.
Post by: pwxn on Fri, 12 July 2019, 11:42:49
Has anyone actually gotten the default PCB from round 2 working properly with QMK?
I've moved the jumpers and flashed a hex compiled from latest QMK source and have several dead keys. B backspace, \|, up arrow, right arrow. If I switch the jumpers back and reflash the hex from ydkb, everything works.
I have my r2 pcb working with QMK, but this was before I knew about the Jumpers. I still haven't moved mine from the default.
I don't have dead keys, they all work. The caps lock light doesn't work for me though. Also the backlighting flickers, but I think that's due to QMK using a software PWM.
I looked through my git history and I didn't make any configuration changes (key layouts only), so I'm not sure why it wouldn't work for you.
But my bigger question now, is why does it work for me even though I have not switched the jumpers? What do the jumpers do?
Post by: rdg on Fri, 12 July 2019, 11:47:39
Has anyone actually gotten the default PCB from round 2 working properly with QMK?
I've moved the jumpers and flashed a hex compiled from latest QMK source and have several dead keys. B backspace, \|, up arrow, right arrow. If I switch the jumpers back and reflash the hex from ydkb, everything works.
I have my r2 pcb working with QMK, but this was before I knew about the Jumpers. I still haven't moved mine from the default.
I don't have dead keys, they all work. The caps lock light doesn't work for me though. Also the backlighting flickers, but I think that's due to QMK using a software PWM.
I looked through my git history and I didn't make any configuration changes (key layouts only), so I'm not sure why it wouldn't work for you.
But my bigger question now, is why does it work for me even though I have not switched the jumpers? What do the jumpers do?
Hmm, well I guess I'll move the jumpers back and try all the hex... I'll report back with what works/doesn't. Thanks for the info.
Post by: rdg on Fri, 12 July 2019, 22:11:50
Thats what I get for following instructions :scream:
So, I'm happy to have a working PCB, but would love to hear an explanation about these jumpers.
Post by: jrfhoutx on Sat, 13 July 2019, 10:33:48
Yep, moving the jumpers back to the original position (which according to the instructions is for YDKB) and then flashing a QMK hex seems to work. So I also have no idea what the jumpers do (other than break a column...)
Thats what I get for following instructions :scream:
So, I'm happy to have a working PCB, but would love to hear an explanation about these jumpers.
Can you flash a ydkb built hex in the current configuration?
Post by: yangdigi on Sat, 13 July 2019, 20:32:28
Whatever it is on or off, with USB cable in, the bluetooth would still work as USB gives power to the keyboard.
If bluetooth can not works well, the wired mode also. So, may be some of the problems is caused by this.
Test it if the bluetooth works as it should be. Plug in USB cable, pair bluetooth device and press LShift+RShift+U to switch to bluetooth mode.
one more question: how the pcb was packed in box?
Post by: rdg on Sat, 13 July 2019, 21:38:02
Yep, moving the jumpers back to the original position (which according to the instructions is for YDKB) and then flashing a QMK hex seems to work. So I also have no idea what the jumpers do (other than break a column...)
Thats what I get for following instructions :scream:
So, I'm happy to have a working PCB, but would love to hear an explanation about these jumpers.
Can you flash a ydkb built hex in the current configuration?
Yes, both type of hex seem to work fine in the original jumper configuration ¯\_(ツ)_/¯
Post by: soakedcardinal on Sun, 14 July 2019, 22:58:13
I put it in bootloader mode and flashed my hex built with YDKB.io using ydkbs-reflash.exe. I followed the guide(s) very carefully . . and the flash completed successfully - I saw it progress and say "... press any key to continue" and I did.
After this the LEDs were gone and every time I connect to my PC windows says "USB device not recognized". Nothing on BT either. Presence of the battery or the switch position makes no difference.
I can still get it into bootloader mode, Windows doesn't give me the error when I hold ESC and plug in. The ydkbs flash tool also still works, I can go into bootloader and flash a hex (the default one . . ) and it appears to complete just fine. But the keyboard is not functional.
I tried flashing with a different cable (both of them are quality) and using different usb2.0 ports. I am scratching my head. Is there a method I'm not using to get a working hex on the board?
Really starting to miss the clacks of these blue alps :( Thanks for any help!
Post by: ZyBeR on Mon, 15 July 2019, 08:12:08
Did you accidentally use the CA66 and not CAD66 firmware?
Post by: yangdigi on Mon, 15 July 2019, 08:14:52
So I don't want to rain on the parade but I'm having issues with my R2 BT PCB. It was working perfectly for a week, wired or BT. Then I decided to flash a keymap and it hasn't worked since.
I put it in bootloader mode and flashed my hex built with YDKB.io using ydkbs-reflash.exe. I followed the guide(s) very carefully . . and the flash completed successfully - I saw it progress and say "... press any key to continue" and I did.
After this the LEDs were gone and every time I connect to my PC windows says "USB device not recognized". Nothing on BT either. Presence of the battery or the switch position makes no difference.
I can still get it into bootloader mode, Windows doesn't give me the error when I hold ESC and plug in. The ydkbs flash tool also still works, I can go into bootloader and flash a hex (the default one . . ) and it appears to complete just fine. But the keyboard is not functional.
I tried flashing with a different cable (both of them are quality) and using different usb2.0 ports. I am scratching my head. Is there a method I'm not using to get a working hex on the board?
Really starting to miss the clacks of these blue alps :( Thanks for any help!
update to the latest firmware of 2019-7-13. I made a little mistake in the previous version.
Post by: jrfhoutx on Mon, 15 July 2019, 10:19:18
So I don't want to rain on the parade but I'm having issues with my R2 BT PCB. It was working perfectly for a week, wired or BT. Then I decided to flash a keymap and it hasn't worked since.
I put it in bootloader mode and flashed my hex built with YDKB.io using ydkbs-reflash.exe. I followed the guide(s) very carefully . . and the flash completed successfully - I saw it progress and say "... press any key to continue" and I did.
After this the LEDs were gone and every time I connect to my PC windows says "USB device not recognized". Nothing on BT either. Presence of the battery or the switch position makes no difference.
I can still get it into bootloader mode, Windows doesn't give me the error when I hold ESC and plug in. The ydkbs flash tool also still works, I can go into bootloader and flash a hex (the default one . . ) and it appears to complete just fine. But the keyboard is not functional.
I tried flashing with a different cable (both of them are quality) and using different usb2.0 ports. I am scratching my head. Is there a method I'm not using to get a working hex on the board?
Really starting to miss the clacks of these blue alps :( Thanks for any help!
update to the latest firmware of 2019-7-13. I made a little mistake in the previous version.
Any chance you might port the bt pcb to qmk?
Post by: yangdigi on Mon, 15 July 2019, 10:38:51
So I don't want to rain on the parade but I'm having issues with my R2 BT PCB. It was working perfectly for a week, wired or BT. Then I decided to flash a keymap and it hasn't worked since.
I put it in bootloader mode and flashed my hex built with YDKB.io using ydkbs-reflash.exe. I followed the guide(s) very carefully . . and the flash completed successfully - I saw it progress and say "... press any key to continue" and I did.
After this the LEDs were gone and every time I connect to my PC windows says "USB device not recognized". Nothing on BT either. Presence of the battery or the switch position makes no difference.
I can still get it into bootloader mode, Windows doesn't give me the error when I hold ESC and plug in. The ydkbs flash tool also still works, I can go into bootloader and flash a hex (the default one . . ) and it appears to complete just fine. But the keyboard is not functional.
I tried flashing with a different cable (both of them are quality) and using different usb2.0 ports. I am scratching my head. Is there a method I'm not using to get a working hex on the board?
Really starting to miss the clacks of these blue alps :( Thanks for any help!
update to the latest firmware of 2019-7-13. I made a little mistake in the previous version.
Any chance you might port the bt pcb to qmk?
I have no that time. So I won't. I am just willing to focus on what I want to do.
Post by: soakedcardinal on Mon, 15 July 2019, 10:57:50
Well, at least your BT-pcb worked for a while..
Did you accidentally use the CA66 and not CAD66 firmware?
:thumb: Yes I am dumb and the CA66 is working again!
I don't know why I thought the BT pcb would be the same target . . but It makes sense now.
Sorry for the false alarm, carry on!
Post by: eviLittle on Fri, 19 July 2019, 01:29:51
Post by: Chaselicious17 on Fri, 19 July 2019, 08:47:51
;D I won't miss this round!
lol I got news for ya bud
Post by: Vizir on Fri, 19 July 2019, 18:03:10
Hahahaha;D I won't miss this round!
lol I got news for ya bud
Sent from my Pixel 2 using Tapatalk
Post by: MeloDet on Wed, 24 July 2019, 15:37:26
Post by: aslanxdeft on Thu, 25 July 2019, 07:14:09
Post by: sirpensir on Thu, 25 July 2019, 11:03:41
Any extras avail? ;D
mechmarket is your best bet
Post by: T0mb3ry on Sat, 27 July 2019, 12:05:05
(https://live.staticflickr.com/65535/48388738262_84def809d9_k.jpg)
(https://live.staticflickr.com/65535/48388591231_a9010c0428_k.jpg)
(https://live.staticflickr.com/65535/48388734277_4303301ef9_k.jpg)
Post by: cijanzen on Sat, 27 July 2019, 12:12:34
Got my build ready.Show Image(https://live.staticflickr.com/65535/48388738262_84def809d9_k.jpg)Show Image(https://live.staticflickr.com/65535/48388591231_a9010c0428_k.jpg)Show Image(https://live.staticflickr.com/65535/48388734277_4303301ef9_k.jpg)
Looks really nice! Is that with the carbon fibre plate? How does it feel?
Post by: Vizir on Sat, 27 July 2019, 12:13:17
Sent from my Pixel 2 using Tapatalk
Post by: T0mb3ry on Sat, 27 July 2019, 12:19:56
Got my build ready.Show Image(https://live.staticflickr.com/65535/48388738262_84def809d9_k.jpg)Show Image(https://live.staticflickr.com/65535/48388591231_a9010c0428_k.jpg)Show Image(https://live.staticflickr.com/65535/48388734277_4303301ef9_k.jpg)
Looks really nice! Is that with the carbon fibre plate? How does it feel?
It feels extremely pleasing to type on for me personally. The downside of it, it is very switch quality/smoothness demanding. The flexing amplifies every scratch greatly. I've tried in my previous build vintage cherries and that plate revealed all the micro scratch they had but by a great amount. You need extremely smooth switches. For example very carefully sorted vintage blacks or tealios. In this current build i've installed tealios with miky tops (milky tops to make tealios soft on bottom out and it works only with cherry profile).
There was a carbon fiber plate option?
Nope there was no option for the carbon plate. I made an special prototype for me. You can read more about it here: https://geekhack.org/index.php?topic=96105.0
Post by: Vizir on Sat, 27 July 2019, 12:24:57
That was an interesting read. I'm not into linears, but very cool.Got my build ready.Show Image(https://live.staticflickr.com/65535/48388738262_84def809d9_k.jpg)Show Image(https://live.staticflickr.com/65535/48388591231_a9010c0428_k.jpg)Show Image(https://live.staticflickr.com/65535/48388734277_4303301ef9_k.jpg)
Looks really nice! Is that with the carbon fibre plate? How does it feel?
It feels extremely pleasing to type on for me personally. The downside of it, it is very switch quality/smoothness demanding. The flexing amplifies every scratch greatly. I've tried in my previous build vintage cherries and that plate revealed all the micro scratch they had but by a great amount. You need extremely smooth switches. For example very carefully sorted vintage blacks or tealios. In this current build i've installed tealios with miky tops (milky tops to make tealios soft on bottom out and it works only with cherry profile).There was a carbon fiber plate option?
Nope there was no option for the carbon plate. I made an special prototype for me. You can read more about it here: https://geekhack.org/index.php?topic=96105.0
Sent from my Pixel 2 using Tapatalk
Post by: hhkbp2 on Sun, 28 July 2019, 20:39:38
Nope there was no option for the carbon plate. I made an special prototype for me. You can read more about it here: https://geekhack.org/index.php?topic=96105.0
I guess you used the plate mount stabilizers for this build?
I made one plate using the plate file you shared but I don't have the time to build it yet.
Looking at the PCB and the default plates of CA66, I think there is a problem on the plate file you shared. The stabilizer direction of spacebar should be reversed in 180 degree to use the pcb mount stabilizers. Because the metal wire of PCB mount stabilizers is on the top side rather than the bottom side.
Post by: jariss on Sun, 28 July 2019, 21:16:41
Also, for some reason I can't get my pc to recognize the bluetooth pcb. My phone recognizes it immediately. I have tried the adafruit app and reflashing the firmware and none of those worked.
Post by: Lyle88 on Sun, 28 July 2019, 21:23:33
Built my kit yesterday. The switch cutouts on the brass plate were not machined correctly almost like the tooling slipped during the machining and I had to file 6 switch cutouts on the left side to get the switches to fit.Contact playkeyboard about the mis-cut plate, they are making replacements at the moment - I had the same issue with both of my plates, both on the left side, as if the plate slipped during laser cutting.
Also, for some reason I can't get my pc to recognize the bluetooth pcb. My phone recognizes it immediately. I have tried the adafruit app and reflashing the firmware and none of those worked.
Sent from my Pixel XL using Tapatalk
Post by: T0mb3ry on Sun, 28 July 2019, 22:41:18
The very first version of the plate had that issue. If you look at the current version it is fixed. I told it somewhere but you probably have missed it.
Nope there was no option for the carbon plate. I made an special prototype for me. You can read more about it here: https://geekhack.org/index.php?topic=96105.0
I guess you used the plate mount stabilizers for this build?
I made one plate using the plate file you shared but I don't have the time to build it yet.
Looking at the PCB and the default plates of CA66, I think there is a problem on the plate file you shared. The stabilizer direction of spacebar should be reversed in 180 degree to use the pcb mount stabilizers. Because the metal wire of PCB mount stabilizers is on the top side rather than the bottom side.
Post by: hhkbp2 on Mon, 29 July 2019, 01:33:01
The very first version of the plate had that issue. If you look at the current version it is fixed. I told it somewhere but you probably have missed it.
Don't know where to get the latest version. I downloaded it last year from the first post in https://geekhack.org/index.php?topic=96105.0. And I double check the svg link now, this problem remains.
Post by: T0mb3ry on Mon, 29 July 2019, 02:28:19
I will update it (when I get home) with my recent version. I had no issues with it in my current build. I've used GMK screw in stabs.The very first version of the plate had that issue. If you look at the current version it is fixed. I told it somewhere but you probably have missed it.
Don't know where to get the latest version. I downloaded it last year from the first post in https://geekhack.org/index.php?topic=96105.0. And I double check the svg link now, this problem remains.
Post by: Ultaar on Mon, 29 July 2019, 08:11:36
Post by: T0mb3ry on Mon, 29 July 2019, 11:45:53
The very first version of the plate had that issue. If you look at the current version it is fixed. I told it somewhere but you probably have missed it.
Don't know where to get the latest version. I downloaded it last year from the first post in https://geekhack.org/index.php?topic=96105.0. And I double check the svg link now, this problem remains.
Re posting it from my thread and there are few points before trying it.
Before getting the plate file there are few notes to read through:
- It is only for personal use!
- This is an experimental plate and there is no guarantee or what ever. Use it on your own risk!
- I highly suggest to lower expectation before trying it. This is just proof of concept and it is not optimal by any means. The length of extensions is not adjustable - which should be the case if we consider what every person has its own preference how much flex they would like to have. There are also factors like spring strength etc. It needs to be individually adjustable. There are many of possibilities how to implement such adjustable extensions but in this case you can only choose between 4 or 8 fix points. The more fix points you use the more stiff it gets. I personally use only 4 fix points for my light linear switches (50g).
- The plate moves constantly while typing. If there is any friction in you switches (say your switches are scratchy) it will amplify the scratchy feel beyond good and evil. My suggestion is to install only extremely smooth switches (carefully sorted vintage blacks or tealios for example). I've done two builds with it and i know what i am talking about. In my first build it was really a dilemma. I will resolder my first build once i get time for it
- I've tried one tactile switch (zealio) on the plate and i can't say if there is an improvement in tactility. In my honest opinion the idea of flexing plate benefits mostly linear switches. I don't want to say you should not try it with tactiles. Probably there are some benefits but i can't feel any from trying only one switch. Usually i am against making a conclusion of just one switch. You can get proper conclusion only after typing in several sessions on a fully assembled board. So all those switch testers are pretty useless.
- Since the plate is moving up and down it needs some space for its movement. Especially for the down movement. CA66 is not designed for the flexing plate thus the plate will hit with its bottom pcb edge against the bottom piece/plate. You need to add some band aid to the impact points. If you are using GMK screw in stabs like me, then you have to add band aid at the points there the screws are. Otherwise you will get nice metal sound every time you will hit the spacebar.
Otherwise if you got time and money to make this plate, then enjoy the experiment. You might like or not but it would be nice if you could share your experience.
[attach=1]
Post by: StrangPrisoner on Tue, 30 July 2019, 21:11:33
When I try to flash my BT PCB using a CAD66 hex file generated on ydkb.io and flashed using ydkb-reflash tool I get a "Reflash Complete" output (see image). However the keyboard is inoperable and I get a device disconnect tone repeatedly until I unplug the PCB. I have noticed that the YDKB website is wonky to say the least and I am concerned that I am not generating a proper hex file. I'm curious if anyone has had similar issues or has any advice for me here.
I've read through the thread and tried everything with the exception of trying to use QMK. I do not see the solder points people are referring to regarding QMK. Any help is appreciated.
Thank you in advance!
Post by: ZyBeR on Wed, 31 July 2019, 00:27:56
Post by: Lyle88 on Wed, 31 July 2019, 03:02:56
I'm hoping to get some help with flashing the BT PCB. I've reached out to Barry and he got to me quickly but we haven't come up with a solution.Do you have a battery connected? I'm not sure if it could cause your problem but I remember reading a comment further back about the polarity markings being reversed on the battery leads - remove the battery and trouble shoot with only hard wire connection.
When I try to flash my BT PCB using a CAD66 hex file generated on ydkb.io and flashed using ydkb-reflash tool I get a "Reflash Complete" output (see image). However the keyboard is inoperable and I get a device disconnect tone repeatedly until I unplug the PCB. I have noticed that the YDKB website is wonky to say the least and I am concerned that I am not generating a proper hex file. I'm curious if anyone has had similar issues or has any advice for me here.
I've read through the thread and tried everything with the exception of trying to use QMK. I do not see the solder points people are referring to regarding QMK. Any help is appreciated.
Thank you in advance!
You probably did, but make sure your are holding down the escape key when you plug the board in all the way through to when it finishes flashing (I think you can let go once flashing begins but I can't remember off the top of my head).
Lastly, check the solder connections on the PCB and daughter board (the controller and usb port especially) and ensure the plug between daughter board and PCB is firmly in place.
That's all I can think to check.
Edit: did you test the board before building and/or flashing a hex file?
Sent from my Pixel XL using Tapatalk
Post by: jrfhoutx on Wed, 31 July 2019, 07:15:52
I'm hoping to get some help with flashing the BT PCB. I've reached out to Barry and he got to me quickly but we haven't come up with a solution.
When I try to flash my BT PCB using a CAD66 hex file generated on ydkb.io and flashed using ydkb-reflash tool I get a "Reflash Complete" output (see image). However the keyboard is inoperable and I get a device disconnect tone repeatedly until I unplug the PCB. I have noticed that the YDKB website is wonky to say the least and I am concerned that I am not generating a proper hex file. I'm curious if anyone has had similar issues or has any advice for me here.
I've read through the thread and tried everything with the exception of trying to use QMK. I do not see the solder points people are referring to regarding QMK. Any help is appreciated.
Thank you in advance!
The BT PCB doesn’t have those solder points that are on the standard pcb. There is no qmk port for the BT PCB yet.
Unfortunately qmk hasn't been ported to the bt pcb.
And it may not be until BT support is expanded in QMK. It will really depend on what BT module is used on the pcb and whether or not it’s supported in QMK currently.
Post by: yangdigi on Wed, 31 July 2019, 08:18:01
I'm hoping to get some help with flashing the BT PCB. I've reached out to Barry and he got to me quickly but we haven't come up with a solution.
When I try to flash my BT PCB using a CAD66 hex file generated on ydkb.io and flashed using ydkb-reflash tool I get a "Reflash Complete" output (see image). However the keyboard is inoperable and I get a device disconnect tone repeatedly until I unplug the PCB. I have noticed that the YDKB website is wonky to say the least and I am concerned that I am not generating a proper hex file. I'm curious if anyone has had similar issues or has any advice for me here.
I've read through the thread and tried everything with the exception of trying to use QMK. I do not see the solder points people are referring to regarding QMK. Any help is appreciated.
Thank you in advance!
The size of your downloaded firmware is not correct.
here is mine.
[attachimg=1]
Post by: konstantin on Wed, 31 July 2019, 10:03:28
Unfortunately qmk hasn't been ported to the bt pcb.
And it may not be until BT support is expanded in QMK. It will really depend on what BT module is used on the pcb and whether or not it’s supported in QMK currently.
Do you know which BLE module (I'm assuming it's BLE) the CA66 BT PCB is using? I am currently working towards expanding BT support in QMK to several new BLE modules as part of a large project I'm working on. I may be able to look into supporting this module as well, or at least perform the expansion in such a way that facilitates adding support for it later on.
Post by: StrangPrisoner on Wed, 31 July 2019, 11:12:20
Do you have a battery connected? I'm not sure if it could cause your problem but I remember reading a comment further back about the polarity markings being reversed on the battery leads - remove the battery and trouble shoot with only hard wire connection.
You probably did, but make sure your are holding down the escape key when you plug the board in all the way through to when it finishes flashing (I think you can let go once flashing begins but I can't remember off the top of my head).
Lastly, check the solder connections on the PCB and daughter board (the controller and usb port especially) and ensure the plug between daughter board and PCB is firmly in place.
That's all I can think to check.
Edit: did you test the board before building and/or flashing a hex file?
Sent from my Pixel XL using Tapatalk
I made sure the polarity on the battery connector was correct and I have tried it both with and without the battery plugged in.
I Looked over all of my solder points and saw no issues. I made sure all the diodes and resistors looked good as well and it seems so. I will double check the USB/daughter board.
I tested to be sure it connected and lit up and all was well. Beyond that I'm not totally sure how best to test a PCB before building.
The BT PCB doesn’t have those solder points that are on the standard pcb. There is no qmk port for the BT PCB yet.Unfortunately qmk hasn't been ported to the bt pcb.
And it may not be until BT support is expanded in QMK. It will really depend on what BT module is used on the pcb and whether or not it’s supported in QMK currently.
Good to know, thank you.
I'm hoping to get some help with flashing the BT PCB. I've reached out to Barry and he got to me quickly but we haven't come up with a solution.
When I try to flash my BT PCB using a CAD66 hex file generated on ydkb.io and flashed using ydkb-reflash tool I get a "Reflash Complete" output (see image). However the keyboard is inoperable and I get a device disconnect tone repeatedly until I unplug the PCB. I have noticed that the YDKB website is wonky to say the least and I am concerned that I am not generating a proper hex file. I'm curious if anyone has had similar issues or has any advice for me here.
I've read through the thread and tried everything with the exception of trying to use QMK. I do not see the solder points people are referring to regarding QMK. Any help is appreciated.
Thank you in advance!
The size of your downloaded firmware is not correct.
here is mine.
(Attachment Link)
I think this is my issue. Barry mentioned the same thing. I'm not sure why that would be though. I've had all sorts of trouble on ydkb.io trying to create a keymap. When I use CAD66 the image will be of whatever keyboard was selected before it not of a CA66. When I switch layers it reverts changes on all layers but the default Layer0. Also when I first select CAD66 the default key mapping is crazy. All keys are set to obscure macros. Perhaps I should try a different browser?
Again thanks for the awesome feedback everyone!
Post by: cijanzen on Wed, 31 July 2019, 12:24:14
Unfortunately qmk hasn't been ported to the bt pcb.
And it may not be until BT support is expanded in QMK. It will really depend on what BT module is used on the pcb and whether or not it’s supported in QMK currently.
Do you know which BLE module (I'm assuming it's BLE) the CA66 BT PCB is using? I am currently working towards expanding BT support in QMK to several new BLE modules as part of a large project I'm working on. I may be able to look into supporting this module as well, or at least perform the expansion in such a way that facilitates adding support for it later on.
If I recall correctly it’s this one https://www.nordicsemi.com/Products/Low-power-short-range-wireless/nRF52832 (https://www.nordicsemi.com/Products/Low-power-short-range-wireless/nRF52832)
Post by: jrfhoutx on Wed, 31 July 2019, 12:55:21
Unfortunately qmk hasn't been ported to the bt pcb.
And it may not be until BT support is expanded in QMK. It will really depend on what BT module is used on the pcb and whether or not it’s supported in QMK currently.
Do you know which BLE module (I'm assuming it's BLE) the CA66 BT PCB is using? I am currently working towards expanding BT support in QMK to several new BLE modules as part of a large project I'm working on. I may be able to look into supporting this module as well, or at least perform the expansion in such a way that facilitates adding support for it later on.
Here’s a shot of the module itself.[attachimg=1]
Post by: cijanzen on Wed, 31 July 2019, 14:02:07
Unfortunately qmk hasn't been ported to the bt pcb.
And it may not be until BT support is expanded in QMK. It will really depend on what BT module is used on the pcb and whether or not it’s supported in QMK currently.
Do you know which BLE module (I'm assuming it's BLE) the CA66 BT PCB is using? I am currently working towards expanding BT support in QMK to several new BLE modules as part of a large project I'm working on. I may be able to look into supporting this module as well, or at least perform the expansion in such a way that facilitates adding support for it later on.
Here’s a shot of the module itself. (Attachment Link)
Right, it’s an ilogic technology ILT51822 with Nordic nRF51822.
Post by: ZyBeR on Wed, 31 July 2019, 16:03:33
For me I can live with out BT if I get QMK, sure both would be ideal but we got to start somewhere.
Post by: jrfhoutx on Wed, 31 July 2019, 17:39:50
Would it be possible to port QMK and skip the BT support for the initial release?
For me I can live with out BT if I get QMK, sure both would be ideal but we got to start somewhere.
For right now, probably. I haven’t really looked into it too much, porting it is on my to do list though. As soon as I finish the firmware for a couple other boards I’m working on, and assembly for some pcbs in a small private buy, I’ll be working on this one.
Post by: leandrovega on Sat, 03 August 2019, 16:02:23
Post by: dr_unconscionable on Sat, 03 August 2019, 17:35:04
Hi, I'm new to GeekHack. Please forgive me if this is a redundant question. Will there be another GB this year for the CA66? I'm just beginning to become familiar with the Group Buy method.
This was the second round for the CA66, which was originally supposed to be a single round only. PlaykeyboardTW have said there will not be a third round.
If you do want to get one, your best bet is to look for someone selling theirs on r/mechmarket!
Post by: Lyle88 on Tue, 06 August 2019, 07:23:21
Sent from my Pixel XL using Tapatalk
Post by: sysfury on Tue, 06 August 2019, 17:48:16
It would be really nice to get an update on replacement replacement parts+1
Sent from my Pixel XL using Tapatalk
Sent from my SM-G975F using Tapatalk
Post by: ZyBeR on Tue, 06 August 2019, 23:34:07
It would be really nice to get an update on replacement replacement parts+2
Sent from my Pixel XL using Tapatalk
Sent from my Pixel 3 using Tapatalk
Post by: Lormania on Tue, 06 August 2019, 23:37:16
It would be really nice to get an update on replacement replacement parts+3
Sent from my Pixel XL using Tapatalk
Post by: jrfhoutx on Wed, 07 August 2019, 07:25:38
It would be really nice to get an update on replacement replacement parts
Sent from my Pixel XL using Tapatalk
+4
Post by: Lyle88 on Thu, 08 August 2019, 21:51:57
Sent from my Pixel XL using Tapatalk
Post by: Subaeru on Fri, 09 August 2019, 02:38:44
Post by: topherrehpot on Sun, 11 August 2019, 12:39:46
Post by: aydio on Sun, 11 August 2019, 14:02:31
Post by: jrfhoutx on Sun, 11 August 2019, 14:26:05
Is there still a possibility to join this GB?
No...
Post by: Gamatatsu on Sat, 17 August 2019, 19:03:56
edit:nvm i just reflashed it and its working now
Post by: Nebulant on Wed, 21 August 2019, 00:58:12
The cost of shipping from the US is prohibitively expensive. After waiting for so long to see if playkeyboards will do anything to make this situation right, I will probably end up just having the board re-coated locally, it will be the more cost effective solution - but this is not how replacements should be handled.
Post by: nulltorious on Wed, 21 August 2019, 02:06:03
Just got notice from PlayKeyboards about sending them back my damaged board for replacement - they wont cover shipping the damaged unit back to them. Frankly this is unacceptable that people that received units of unacceptable quality now have to pay even more money to get their boards replaced. The quote I received from DHL was for $140.
The cost of shipping from the US is prohibitively expensive. After waiting for so long to see if playkeyboards will do anything to make this situation right, I will probably end up just having the board re-coated locally, it will be the more cost effective solution - but this is not how replacements should be handled.
That sucks you didn't receive a board up standards but this is standard practice in ecommerce. The buyer usually pays for shipping return items back. Even Amazon will deduct the price of shipping from the refund amount.
$140 sounds a bit high, I ship lots of stuff from the US to Taiwan and usually the costs is around $80 (UPS ground / USPS). The cerakote option seems to be the most attractive option.
Post by: Saga on Sat, 24 August 2019, 18:39:04
That sucks you didn't receive a board up standards but this is standard practice in ecommerce. The buyer usually pays for shipping return items back. Even Amazon will deduct the price of shipping from the refund amount.
This isn’t even remotely accurate for damaged items.
Post by: roymt76 on Sat, 31 August 2019, 12:49:05
(https://i.imgur.com/CDeolVA.jpg)
(https://i.imgur.com/XPSm8Pv.jpg)
(https://i.imgur.com/34Lyx8b.jpg)
(https://i.imgur.com/4SZWXuG.jpg)
Thanks you guys for making this.
More image in https://imgur.com/a/wdcQX2j
Post by: andrewregal on Sun, 01 September 2019, 02:23:23
(https://i.redd.it/ver34ftdbad31.png)
Is there any way we could find out about extra parts? I would gladly buy an extra PCB, or a bluetooth one if any are available
Post by: Lyle88 on Sun, 01 September 2019, 02:30:26
I got around to building my CA66 a couple weeks ago. Wish I had a better cameraNot sure about extras but they are still organising replacement parts for those who had issues with their orders. It's been a while so an update might be coming soon thoughShow Image(https://i.redd.it/ver34ftdbad31.png)
Is there any way we could find out about extra parts? I would gladly buy an extra PCB, or a bluetooth one if any are available
Sent from my Pixel XL using Tapatalk
Post by: your_fish_monger on Tue, 03 September 2019, 13:03:50
Post by: Vizir on Tue, 03 September 2019, 14:23:55
Looking to buy a black or dark gray kit, and willing to pay a premium. Contact me here or on Reddit at the same username. (Positive feedback in /r/MechMarket at my username)Check pm
Sent from my Pixel 2 using Tapatalk
Post by: japanitrat on Fri, 06 September 2019, 13:12:09
Mine disconnects several times a day, almost as if it reboots... Both in Windows and OSX.
Sent from my Pixel 2 using Tapatalk
Same here. Regardless of whether used in Bluetooth mode or with cable. Also regardless of whether battery is turned on/off.
Would love to know if there is a solution to that as it's highly annoying when typing.
Post by: Vizir on Fri, 06 September 2019, 13:19:04
I got most of those fixed by grounding the usbc to the case. Try thatMine disconnects several times a day, almost as if it reboots... Both in Windows and OSX.
Sent from my Pixel 2 using Tapatalk
Same here. Regardless of whether used in Bluetooth mode or with cable. Also regardless of whether battery is turned on/off.
Would love to know if there is a solution to that as it's highly annoying when typing.
Sent from my Pixel 2 using Tapatalk
Post by: PlayKeyboardTW on Mon, 09 September 2019, 01:00:07
Since we are in pretty busy and chaotic situation to work on multiple tasks at the moment, please try to contact us via email or Facebook fan page.
That will be better and easier for letting us know who you are and track previous messages.
Thanks for the cooperation. :)
Post by: architones on Thu, 19 September 2019, 22:38:42
I got most of those fixed by grounding the usbc to the case. Try thatMine disconnects several times a day, almost as if it reboots... Both in Windows and OSX.
Sent from my Pixel 2 using Tapatalk
Same here. Regardless of whether used in Bluetooth mode or with cable. Also regardless of whether battery is turned on/off.
Would love to know if there is a solution to that as it's highly annoying when typing.
Sent from my Pixel 2 using Tapatalk
Sorry if this a dumb question, but how do you ground the USB C cable to the case? I'm starting to have issues where my BT pcb keeps rebooting.
Post by: Vizir on Thu, 19 September 2019, 23:15:34
Look hereI got most of those fixed by grounding the usbc to the case. Try thatMine disconnects several times a day, almost as if it reboots... Both in Windows and OSX.
Sent from my Pixel 2 using Tapatalk
Same here. Regardless of whether used in Bluetooth mode or with cable. Also regardless of whether battery is turned on/off.
Would love to know if there is a solution to that as it's highly annoying when typing.
Sent from my Pixel 2 using Tapatalk
Sorry if this a dumb question, but how do you ground the USB C cable to the case? I'm starting to have issues where my BT pcb keeps rebooting.
https://geekhack.org/index.php?topic=97035.msg2783022.msg#2783022
Sent from my Pixel 2 using Tapatalk
Post by: architones on Fri, 20 September 2019, 02:08:23
Look hereI got most of those fixed by grounding the usbc to the case. Try thatMine disconnects several times a day, almost as if it reboots... Both in Windows and OSX.
Sent from my Pixel 2 using Tapatalk
Same here. Regardless of whether used in Bluetooth mode or with cable. Also regardless of whether battery is turned on/off.
Would love to know if there is a solution to that as it's highly annoying when typing.
Sent from my Pixel 2 using Tapatalk
Sorry if this a dumb question, but how do you ground the USB C cable to the case? I'm starting to have issues where my BT pcb keeps rebooting.
https://geekhack.org/index.php?topic=97035.msg2783022.msg#2783022
Sent from my Pixel 2 using Tapatalk
Great, thanks!
Post by: Lyle88 on Sat, 26 October 2019, 11:49:12
Photos to compare good side with the bad side(https://uploads.tapatalk-cdn.com/20191026/1047990f8c5265e3a3f5c0c1f2868c4b.jpg)(https://uploads.tapatalk-cdn.com/20191026/70a60ccc4fe59711be0f4c53bab2e43f.jpg)
Sent from my Pixel XL using Tapatalk
Post by: lukelex on Sat, 26 October 2019, 12:26:20
What's the opinion on the alu plates? My replacement one looks kinda like it was cut with a band saw - also kinda sharp.That looks nasty
Photos to compare good side with the bad sideShow Image(https://uploads.tapatalk-cdn.com/20191026/1047990f8c5265e3a3f5c0c1f2868c4b.jpg)Show Image(https://uploads.tapatalk-cdn.com/20191026/70a60ccc4fe59711be0f4c53bab2e43f.jpg)
Sent from my Pixel XL using Tapatalk
Sent from my SM-G975F using Tapatalk
Post by: jupitard on Thu, 31 October 2019, 15:19:04
I Have gone through 2 PCBs so far.
Booth with the same symptoms. random keys stop working. then the whole thing stops working.
Does anyone know where I can get another PCB, or a replacement?
at this point, it's looking like I will have to hand wire this to get it back to life.
Post by: lukelex on Thu, 31 October 2019, 15:36:20
I have a Round 1 Ca66 Winkeyless kit.Someone, not saying who, might be looking into making an aftermarket replacement pcb
I Have gone through 2 PCBs so far.
Booth with the same symptoms. random keys stop working. then the whole thing stops working.
Does anyone know where I can get another PCB, or a replacement?
at this point, it's looking like I will have to hand wire this to get it back to life.
Sent from my SM-G975F using Tapatalk
Post by: Vizir on Fri, 01 November 2019, 08:49:36
Sent from my Pixel 2 using Tapatalk
Post by: j0hn3h on Sat, 02 November 2019, 13:09:02
I have a pcb which I am not using. Only thing is, it has millmax sockets installed. I did install them in every possible cherry mx switch position.
Sent from my Pixel 2 using Tapatalk
I'm interested in purchasing your spare pcb. Let me know if you want to sell it.
Post by: jrfhoutx on Sun, 03 November 2019, 16:27:27
I have a Round 1 Ca66 Winkeyless kit.Someone, not saying who, might be looking into making an aftermarket replacement pcb
I Have gone through 2 PCBs so far.
Booth with the same symptoms. random keys stop working. then the whole thing stops working.
Does anyone know where I can get another PCB, or a replacement?
at this point, it's looking like I will have to hand wire this to get it back to life.
Sent from my SM-G975F using Tapatalk
My prototypes for my replacement should be here in a few days...
Post by: sysfury on Mon, 04 November 2019, 08:39:22
I have a Round 1 Ca66 Winkeyless kit.They promised replacement PCBs for participants in Round 1.
I Have gone through 2 PCBs so far.
Booth with the same symptoms. random keys stop working. then the whole thing stops working.
Does anyone know where I can get another PCB, or a replacement?
at this point, it's looking like I will have to hand wire this to get it back to life.
https://geekhack.org/index.php?PHPSESSID=iokk9a9rvh856od6ohiq8ehign7io8j4&topic=93542.msg2712253#msg2712253
I contacted them on Facebook Messenger and they sent me a Round 2 PCB for free.
http://m.me/playkeyboard
Sent from my SM-G975F using Tapatalk
Post by: j0hn3h on Wed, 13 November 2019, 01:34:58
I have a Round 1 Ca66 Winkeyless kit.They promised replacement PCBs for participants in Round 1.
I Have gone through 2 PCBs so far.
Booth with the same symptoms. random keys stop working. then the whole thing stops working.
Does anyone know where I can get another PCB, or a replacement?
at this point, it's looking like I will have to hand wire this to get it back to life.
https://geekhack.org/index.php?PHPSESSID=iokk9a9rvh856od6ohiq8ehign7io8j4&topic=93542.msg2712253#msg2712253
I contacted them on Facebook Messenger and they sent me a Round 2 PCB for free.
http://m.me/playkeyboard
Sent from my SM-G975F using Tapatalk
Just messaged them on FB Messenger about when the extra PCB's will be available for purchase and heard nothing back.
The last time they replied to me was back in March about PCB's being up in April.
Post by: jrfhoutx on Wed, 13 November 2019, 16:30:27
I have a Round 1 Ca66 Winkeyless kit.They promised replacement PCBs for participants in Round 1.
I Have gone through 2 PCBs so far.
Booth with the same symptoms. random keys stop working. then the whole thing stops working.
Does anyone know where I can get another PCB, or a replacement?
at this point, it's looking like I will have to hand wire this to get it back to life.
https://geekhack.org/index.php?PHPSESSID=iokk9a9rvh856od6ohiq8ehign7io8j4&topic=93542.msg2712253#msg2712253
I contacted them on Facebook Messenger and they sent me a Round 2 PCB for free.
http://m.me/playkeyboard
Sent from my SM-G975F using Tapatalk
Just messaged them on FB Messenger about when the extra PCB's will be available for purchase and heard nothing back.
The last time they replied to me was back in March about PCB's being up in April.
Yeah, I wouldn’t hold out hope.
On another note, my lastest (and hopefully last) round of prototypes are in, will assemble a few and send them to my testers on my next day off of work (Monday).
Post by: d00deitsnik on Wed, 13 November 2019, 20:06:26
Prototypes for CA66-compatible PCBs?
Yeah, I wouldn’t hold out hope.
On another note, my lastest (and hopefully last) round of prototypes are in, will assemble a few and send them to my testers on my next day off of work (Monday).
Post by: Lormania on Wed, 13 November 2019, 20:36:07
Post by: jrfhoutx on Wed, 13 November 2019, 21:16:06
Prototypes for CA66-compatible PCBs?
Yeah, I wouldn’t hold out hope.
On another note, my lastest (and hopefully last) round of prototypes are in, will assemble a few and send them to my testers on my next day off of work (Monday).
Yep, direct drop in replacement. May include a replacement daughter board as well, though that may take another round of prototypes to get right. I used the wrong type C connector in the current batch, and two of the screw holes are slightly off, so it sits a little crooked and isn't super stable. but having a replacement isn't super critical, the original can still be used just fine.
Post by: d00deitsnik on Wed, 13 November 2019, 21:20:42
This sounds pretty great. If it's been asked before, I apologize, but will your PCBs have BT too?Prototypes for CA66-compatible PCBs?
Yeah, I wouldn’t hold out hope.
On another note, my lastest (and hopefully last) round of prototypes are in, will assemble a few and send them to my testers on my next day off of work (Monday).
Yep, direct drop in replacement. May include a replacement daughter board as well, though that may take another round of prototypes to get right. I used the wrong type C connector in the current batch, and two of the screw holes are slightly off, so it sits a little crooked and isn't super stable. but having a replacement isn't super critical, the original can still be used just fine.
Post by: jrfhoutx on Wed, 13 November 2019, 22:49:52
This sounds pretty great. If it's been asked before, I apologize, but will your PCBs have BT too?Prototypes for CA66-compatible PCBs?
Yeah, I wouldn’t hold out hope.
On another note, my lastest (and hopefully last) round of prototypes are in, will assemble a few and send them to my testers on my next day off of work (Monday).
Yep, direct drop in replacement. May include a replacement daughter board as well, though that may take another round of prototypes to get right. I used the wrong type C connector in the current batch, and two of the screw holes are slightly off, so it sits a little crooked and isn't super stable. but having a replacement isn't super critical, the original can still be used just fine.
No. QMK BT support isn't that great right now, so I decided not to support it right now. in the future, if the support and integration in qmk improves, I'll make a BT version.
Post by: d00deitsnik on Thu, 14 November 2019, 01:01:47
Thanks for the info. Hopefully the BT support improves sooner than later. Either way, I look forward to your replacements. :thumb:This sounds pretty great. If it's been asked before, I apologize, but will your PCBs have BT too?Prototypes for CA66-compatible PCBs?
Yeah, I wouldn’t hold out hope.
On another note, my lastest (and hopefully last) round of prototypes are in, will assemble a few and send them to my testers on my next day off of work (Monday).
Yep, direct drop in replacement. May include a replacement daughter board as well, though that may take another round of prototypes to get right. I used the wrong type C connector in the current batch, and two of the screw holes are slightly off, so it sits a little crooked and isn't super stable. but having a replacement isn't super critical, the original can still be used just fine.
No. QMK BT support isn't that great right now, so I decided not to support it right now. in the future, if the support and integration in qmk improves, I'll make a BT version.
Post by: colluphid42 on Tue, 26 November 2019, 10:56:06
Prototypes for CA66-compatible PCBs?
Yeah, I wouldn’t hold out hope.
On another note, my lastest (and hopefully last) round of prototypes are in, will assemble a few and send them to my testers on my next day off of work (Monday).
Yep, direct drop in replacement. May include a replacement daughter board as well, though that may take another round of prototypes to get right. I used the wrong type C connector in the current batch, and two of the screw holes are slightly off, so it sits a little crooked and isn't super stable. but having a replacement isn't super critical, the original can still be used just fine.
I hope you can get this all worked out soon. I've got two CA66s with failed PCBs sitting here collecting dust. Play-Keyboard isn't responding to me, so replacements are probably my only option.
Post by: redjarojam on Mon, 02 December 2019, 14:42:29
On another note, my lastest (and hopefully last) round of prototypes are in, will assemble a few and send them to my testers on my next day off of work (Monday).
Thank you. I am ready when they are.
Post by: tex_live_utility on Mon, 16 December 2019, 11:23:13
I have a Round 1 Ca66 Winkeyless kit.They promised replacement PCBs for participants in Round 1.
I Have gone through 2 PCBs so far.
Booth with the same symptoms. random keys stop working. then the whole thing stops working.
Does anyone know where I can get another PCB, or a replacement?
at this point, it's looking like I will have to hand wire this to get it back to life.
https://geekhack.org/index.php?PHPSESSID=iokk9a9rvh856od6ohiq8ehign7io8j4&topic=93542.msg2712253#msg2712253
I contacted them on Facebook Messenger and they sent me a Round 2 PCB for free.
http://m.me/playkeyboard
Sent from my SM-G975F using Tapatalk
Just messaged them on FB Messenger about when the extra PCB's will be available for purchase and heard nothing back.
The last time they replied to me was back in March about PCB's being up in April.
Yeah, I wouldn’t hold out hope.
On another note, my lastest (and hopefully last) round of prototypes are in, will assemble a few and send them to my testers on my next day off of work (Monday).
This is very frustrating. I sold an extra PCB to someone else without testing it first, and it looks like theirs was DOA. Both the buyer and I are now getting the runaround from Barry at Play Keyboards. I certainly won't be joining another one of their GBs.
Post by: DukeEsquire on Mon, 16 December 2019, 12:48:33
I have a Round 1 Ca66 Winkeyless kit.They promised replacement PCBs for participants in Round 1.
I Have gone through 2 PCBs so far.
Booth with the same symptoms. random keys stop working. then the whole thing stops working.
Does anyone know where I can get another PCB, or a replacement?
at this point, it's looking like I will have to hand wire this to get it back to life.
https://geekhack.org/index.php?PHPSESSID=iokk9a9rvh856od6ohiq8ehign7io8j4&topic=93542.msg2712253#msg2712253
I contacted them on Facebook Messenger and they sent me a Round 2 PCB for free.
http://m.me/playkeyboard
Sent from my SM-G975F using Tapatalk
Just messaged them on FB Messenger about when the extra PCB's will be available for purchase and heard nothing back.
The last time they replied to me was back in March about PCB's being up in April.
Yeah, I wouldn’t hold out hope.
On another note, my lastest (and hopefully last) round of prototypes are in, will assemble a few and send them to my testers on my next day off of work (Monday).
This is very frustrating. I sold an extra PCB to someone else without testing it first, and it looks like theirs was DOA. Both the buyer and I are now getting the runaround from Barry at Play Keyboards. I certainly won't be joining another one of their GBs.
That sucks.
Something similar happened to me with the Lubrigante GB. Now, I check all parts and PCBs before I sell. I should have done this before, but **** happens.
Post by: online on Sun, 29 December 2019, 00:18:16
Post by: coffeeshopcoder on Sun, 29 December 2019, 16:49:52
Post by: d00deitsnik on Mon, 30 December 2019, 02:19:57
Does anyone know where I can buy a new plate?
Or would it be a better idea to get a new plate cut from the plate file?
Post by: ZyBeR on Fri, 03 January 2020, 23:30:50
Post by: phinix on Wed, 15 January 2020, 10:01:32
Ideally WKL version.
EDIT: I just read all those posts about issues you guys had.. wow... that doesn't sound good.
I wish someone made very similar keyboard, but with proper pcbs etc...
Post by: dwarflemur on Wed, 15 January 2020, 11:39:17
Post by: d00deitsnik on Wed, 15 January 2020, 22:28:24
I've got one from the first round and the PCB seems to have randomly completely died, and now looking back it sounds like this is not that uncommon? Is there anywhere to get a PCB right now or upcoming?
Your best bet would be to wait on the PCBs that jrfhoutx is prototyping right now. Either that or message play-keyboard and hope to hear news from them.
Post by: child on Fri, 17 January 2020, 09:31:04
Post by: DetectiveNio on Sun, 02 February 2020, 20:51:22
Post by: Lyle88 on Sun, 02 February 2020, 20:55:07
Long shot but does anyone know where to acquire a daughter board for the CA66? Is it something that can be bought off Amazon/ebay?Probably best to ask PKB. They have a chat feature on their website. Do you have the ribbon cable?
Sent from my SM-G970F using Tapatalk
Post by: DetectiveNio on Sun, 02 February 2020, 21:04:33
Long shot but does anyone know where to acquire a daughter board for the CA66? Is it something that can be bought off Amazon/ebay?Probably best to ask PKB. They have a chat feature on their website. Do you have the ribbon cable?
Sent from my SM-G970F using Tapatalk
I bought a r2 PCB off of someone who has an extra PCB but he's also selling the other bundle as a whole so I'm left without a daughter board :P
Post by: Lyle88 on Sun, 02 February 2020, 22:31:30
So do you have a case?Long shot but does anyone know where to acquire a daughter board for the CA66? Is it something that can be bought off Amazon/ebay?Probably best to ask PKB. They have a chat feature on their website. Do you have the ribbon cable?
Sent from my SM-G970F using Tapatalk
I bought a r2 PCB off of someone who has an extra PCB but he's also selling the other bundle as a whole so I'm left without a daughter board
You might be able to find a USB C socket with the correct type of ribbon cable pre-installed to go directly into the main PCB if you can't get the daughter board..?
That would require some hacking in order to mount it to the case though..
Sent from my SM-G970F using Tapatalk
Post by: jrfhoutx on Wed, 05 February 2020, 10:29:41
I messaged play-keyboard on Messenger and they said it's too long since my buy (which was over a year ago, first international round) to get a free replacement.
TBH I think that's BS. It was specifically said they would send free replacement PCBs to R1 buyers (1 free if you bought 2 pcbs, half price if you only bought one in R1) to replace the failing PCBs from R1. They said for R1 buyers to wait and they would inform R1 buyers when to send their info and start sending out replacements after R2 shipped. I never heard anything about replacements after that statement. I even asked them and was told the same thing, to wait, they would let people know. I asked about extras (PCBs and plates), was told they'd be available after R2, never heard anything or saw any listed...
Honestly, much as I love my CA66, the communication has been consistently abysmal...
Post by: Oatburner on Thu, 06 February 2020, 07:29:19
I messaged play-keyboard on Messenger and they said it's too long since my buy (which was over a year ago, first international round) to get a free replacement.
TBH I think that's BS. It was specifically said they would send free replacement PCBs to R1 buyers (1 free if you bought 2 pcbs, half price if you only bought one in R1) to replace the failing PCBs from R1. They said for R1 buyers to wait and they would inform R1 buyers when to send their info and start sending out replacements after R2 shipped. I never heard anything about replacements after that statement. I even asked them and was told the same thing, to wait, they would let people know. I asked about extras (PCBs and plates), was told they'd be available after R2, never heard anything or saw any listed...
Honestly, much as I love my CA66, the communication has been consistently abysmal...
Sadly I'd have to agree, the communication has been very poor. I feel fortunate to have even gotten my R2 CA66, nearly a year and a half after ordering it. I still have around $150 in add-on plates/pcbs/switches that have yet to be fulfilled.
Post by: PocketAces on Thu, 27 February 2020, 09:27:16
Did this have a WinKey version at all? All I’m finding on mechmarket are HHKB and WKL.
Are there any plans for an R3? Or another version of the board with a different layout? I’ve been really into the 75% form factor lately, and I think it would look great with this design.
I’m hugely into the aesthetics of this board, and I’d really love to add one to my collection!
Sent from my iPhone using Tapatalk
Post by: TheAutoManCan on Thu, 27 February 2020, 12:10:44
Hey, I know it seems this GB didn’t end on the best note, but I’m wondering about a couple things since I missed it.There were only the two options of either HHKB or WKL. Officially there were four rounds, the two posted here were for the international buys. Considering how messy this last round was I wouldn't consider there to be a high likelihood for a fifth round. If you really like it then I would recommend buying one on r/mm since they aren't uncommon and they usually aren't flipped for crazy amounts of money.
Did this have a WinKey version at all? All I’m finding on mechmarket are HHKB and WKL.
Are there any plans for an R3? Or another version of the board with a different layout? I’ve been really into the 75% form factor lately, and I think it would look great with this design.
I’m hugely into the aesthetics of this board, and I’d really love to add one to my collection!
Sent from my iPhone using Tapatalk
I think there have been a few boards that took some level of inspiration from the CA66's layout, the most notable in my memory is the Satisfaction 75. But as far as the case aesthetics go I think the CA66 is pretty unique.
Post by: PocketAces on Thu, 27 February 2020, 14:02:20
You’re right. They’re pretty easy to find on r/mm, I guess now it’s up to me to decide whether the aesthetics are worth giving up my windows keyHey, I know it seems this GB didn’t end on the best note, but I’m wondering about a couple things since I missed it.There were only the two options of either HHKB or WKL. Officially there were four rounds, the two posted here were for the international buys. Considering how messy this last round was I wouldn't consider there to be a high likelihood for a fifth round. If you really like it then I would recommend buying one on r/mm since they aren't uncommon and they usually aren't flipped for crazy amounts of money.
Did this have a WinKey version at all? All I’m finding on mechmarket are HHKB and WKL.
Are there any plans for an R3? Or another version of the board with a different layout? I’ve been really into the 75% form factor lately, and I think it would look great with this design.
I’m hugely into the aesthetics of this board, and I’d really love to add one to my collection!
Sent from my iPhone using Tapatalk
I think there have been a few boards that took some level of inspiration from the CA66's layout, the most notable in my memory is the Satisfaction 75. But as far as the case aesthetics go I think the CA66 is pretty unique.
. I appreciate the reply.
Sent from my iPhone using Tapatalk
Post by: child on Thu, 27 February 2020, 14:10:40
Post by: TheAutoManCan on Fri, 28 February 2020, 12:26:31
There shouldn't be any reason why you'd be giving up the Win key with either config, unless you have a very atypical preferred layout.You’re right. They’re pretty easy to find on r/mm, I guess now it’s up to me to decide whether the aesthetics are worth giving up my windows keyHey, I know it seems this GB didn’t end on the best note, but I’m wondering about a couple things since I missed it.There were only the two options of either HHKB or WKL. Officially there were four rounds, the two posted here were for the international buys. Considering how messy this last round was I wouldn't consider there to be a high likelihood for a fifth round. If you really like it then I would recommend buying one on r/mm since they aren't uncommon and they usually aren't flipped for crazy amounts of money.
Did this have a WinKey version at all? All I’m finding on mechmarket are HHKB and WKL.
Are there any plans for an R3? Or another version of the board with a different layout? I’ve been really into the 75% form factor lately, and I think it would look great with this design.
I’m hugely into the aesthetics of this board, and I’d really love to add one to my collection!
Sent from my iPhone using Tapatalk
I think there have been a few boards that took some level of inspiration from the CA66's layout, the most notable in my memory is the Satisfaction 75. But as far as the case aesthetics go I think the CA66 is pretty unique.
I appreciate the reply.
Sent from my iPhone using Tapatalk
WKL allows for the standard Ctrl-Win-Alt layout. HHKB allows for Win-Alt layout since most people would use Ctrl in place of Caps Lock with an HHKB layout. And with either you can use split space to get three keys to the left of the spacebars.
Post by: aslanxdeft on Tue, 10 March 2020, 10:17:25
Post by: Lormania on Thu, 26 March 2020, 11:15:16
For people who are looking for a replacement pcb I've found this one https://m.intl.taobao.com/detail/detail.html?id=608350988376&spm=a2141.7631565.1.1_1
Interesting, has anyone actually ordered and is currently using one of these? Would love another PCB that is reliable.
Post by: konstantin on Thu, 26 March 2020, 11:31:23
Post by: Tobu on Fri, 27 March 2020, 14:21:38
Prototypes for CA66-compatible PCBs?
Yeah, I wouldn’t hold out hope.
On another note, my lastest (and hopefully last) round of prototypes are in, will assemble a few and send them to my testers on my next day off of work (Monday).
Yep, direct drop in replacement. May include a replacement daughter board as well, though that may take another round of prototypes to get right. I used the wrong type C connector in the current batch, and two of the screw holes are slightly off, so it sits a little crooked and isn't super stable. but having a replacement isn't super critical, the original can still be used just fine.
I hope you can get this all worked out soon. I've got two CA66s with failed PCBs sitting here collecting dust. Play-Keyboard isn't responding to me, so replacements are probably my only option.
In the same boat. PCB started freaking out and ghost inputting random keys. Thought it was a programming or flashing error on my part but seeing this thread I see I'm not the only one. Mine is not the bluetooth version
Post by: Kerasan on Fri, 03 April 2020, 05:52:00
Post by: jrfhoutx on Fri, 03 April 2020, 11:51:34
Prototypes for CA66-compatible PCBs?
Yeah, I wouldn’t hold out hope.
On another note, my lastest (and hopefully last) round of prototypes are in, will assemble a few and send them to my testers on my next day off of work (Monday).
Yep, direct drop in replacement. May include a replacement daughter board as well, though that may take another round of prototypes to get right. I used the wrong type C connector in the current batch, and two of the screw holes are slightly off, so it sits a little crooked and isn't super stable. but having a replacement isn't super critical, the original can still be used just fine.
I hope you can get this all worked out soon. I've got two CA66s with failed PCBs sitting here collecting dust. Play-Keyboard isn't responding to me, so replacements are probably my only option.
In the same boat. PCB started freaking out and ghost inputting random keys. Thought it was a programming or flashing error on my part but seeing this thread I see I'm not the only one. Mine is not the bluetooth version
Yeah, it's still in progress. I had a few issues with the last prototypes, and was holding off until after CNY to order a new round of prototypes. unfortunately we all know how that was delayed by the current pandemic situation. but I also managed to fracture a vertebrae and that has most things on hold for me right now until it's healed.
I can't sit or stand for long periods of time, so no long soldering sessions and no long sessions at the computer revising designs. so most of my projects are temporarily on hold or moving forward very slowly. they are all still moving forward, just not as quickly as I'd like.
believe me, I want things to move much faster than they are. I would have liked to have been done with this already, and be getting boards out to you all. but it is what it is I guess.
Post by: j0hn3h on Fri, 03 April 2020, 14:11:55
Prototypes for CA66-compatible PCBs?
Yeah, I wouldn’t hold out hope.
On another note, my lastest (and hopefully last) round of prototypes are in, will assemble a few and send them to my testers on my next day off of work (Monday).
Yep, direct drop in replacement. May include a replacement daughter board as well, though that may take another round of prototypes to get right. I used the wrong type C connector in the current batch, and two of the screw holes are slightly off, so it sits a little crooked and isn't super stable. but having a replacement isn't super critical, the original can still be used just fine.
I hope you can get this all worked out soon. I've got two CA66s with failed PCBs sitting here collecting dust. Play-Keyboard isn't responding to me, so replacements are probably my only option.
In the same boat. PCB started freaking out and ghost inputting random keys. Thought it was a programming or flashing error on my part but seeing this thread I see I'm not the only one. Mine is not the bluetooth version
Yeah, it's still in progress. I had a few issues with the last prototypes, and was holding off until after CNY to order a new round of prototypes. unfortunately we all know how that was delayed by the current pandemic situation. but I also managed to fracture a vertebrae and that has most things on hold for me right now until it's healed.
I can't sit or stand for long periods of time, so no long soldering sessions and no long sessions at the computer revising designs. so most of my projects are temporarily on hold or moving forward very slowly. they are all still moving forward, just not as quickly as I'd like.
believe me, I want things to move much faster than they are. I would have liked to have been done with this already, and be getting boards out to you all. but it is what it is I guess.
No worries! Hope you get better soon! I'll definitely be buying once they go on sale.
Post by: Jonathan0903 on Thu, 09 April 2020, 03:51:01
Anyone have tarnishing issues with their brass badge? Also anyone have suggestions on how to deal with this?
Post by: nulltorious on Thu, 09 April 2020, 05:11:23
(Attachment Link)
Anyone have tarnishing issues with their brass badge? Also anyone have suggestions on how to deal with this?
brasso metal polish should work. I used this before on a brass plate with good results.
Post by: konstantin on Thu, 09 April 2020, 08:28:29
(Attachment Link)
Anyone have tarnishing issues with their brass badge? Also anyone have suggestions on how to deal with this?
That looks awesome if you ask me! Adds character.
Anyway, WD40 and Windex (yes, Windex) worked for me for similar issues with brass (mirror polished, though).
Post by: donut_sauce on Sun, 26 April 2020, 08:02:29
i don't remember ever seeing this pop up before although it's been a while since i downloaded it
Post by: donut_sauce on Sun, 03 May 2020, 09:04:54
Post by: MisterKnife on Sat, 04 July 2020, 07:15:40
Post by: Wojciech on Sat, 04 July 2020, 07:31:30
Post by: lukelex on Sat, 04 July 2020, 07:38:58
Hey there, I've made a replacement PCB for this kb with a stm32f072 chip and esd protection. my prototype works great. is there interest for me to do a batch of these? cost will be around 30 euros per board excl shipping.I'd get 2 if you do.
Sent from my SM-G975F using Tapatalk
Post by: KeebCalmAndCarryOn on Sat, 04 July 2020, 08:48:07
Post by: MisterKnife on Sat, 04 July 2020, 09:08:30
- STM32
- QMK compatible
- ESD protection
- Case grounded
- 6 RGB leds
- Molex pico connector between the two boards
- No iso layout or split spacebar
- No leds for the keys (backlight)
I'll make a google form later today. unsure yet how to handle shipping in what is cheapest / best.
Shipping will be from the Netherlands
Post by: cijanzen on Sat, 04 July 2020, 09:08:38
Also definitely interested. Will the frame colors be the same as the previous round? Thank you.
Uhh this is just a PCB we’re talking about. Not another run for a whole CA66 PCB, plates, and cases.
Hey there, I've made a replacement PCB for this kb with a stm32f072 chip and esd protection. my prototype works great. is there interest for me to do a batch of these? cost will be around 30 euros per board excl shipping.
Would be interested but would like to have more details!
Edit: okay details were provided just as I submitted this. What layouts would it support?
Post by: nulltorious on Sat, 04 July 2020, 10:51:22
Post by: fer.real on Sat, 04 July 2020, 12:10:19
- No split spacebar
I was really interested until I saw this. Any chance of adding split spacebar support? If so, I'd buy two.
Edit: Autocorrect.
Post by: MisterKnife on Sat, 04 July 2020, 13:00:42
- No split spacebar
I was really interested until I saw this. Any chance of adding split spacebar support? If so, I'd buy two.
Edit: Autocorrect.
Allright I add them ;-)
Post by: Briezion on Sat, 04 July 2020, 15:36:39
Hey there, I've made a replacement PCB for this kb with a stm32f072 chip and esd protection. my prototype works great. is there interest for me to do a batch of these? cost will be around 30 euros per board excl shipping.Very, *VERY* interested. Also interested in split space support. Would also buy two or more!
Sent from my SM-G960U using Tapatalk
Post by: euphxenos on Sat, 04 July 2020, 18:01:43
just MX and no bluetooth. qmk with stm32 does not work with bluetooth yet.
- STM32
- QMK compatible
- ESD protection
- Case grounded
- 6 RGB leds
- Molex pico connector between the two boards
- No iso layout or split spacebar
- No leds for the keys (backlight)
I'll make a google form later today. unsure yet how to handle shipping in what is cheapest / best.
Shipping will be from the Netherlands
I'm interested. It would probably be a good idea to post a picture showing supported layouts. This PCB probably needs an IC thread of its own.
Post by: j0hn3h on Sat, 04 July 2020, 20:58:59
just MX and no bluetooth. qmk with stm32 does not work with bluetooth yet.
- STM32
- QMK compatible
- ESD protection
- Case grounded
- 6 RGB leds
- Molex pico connector between the two boards
- No iso layout or split spacebar
- No leds for the keys (backlight)
I'll make a google form later today. unsure yet how to handle shipping in what is cheapest / best.
Shipping will be from the Netherlands
You don't know how long I've been waiting for this. I am definitely in! Thank you so much for your efforts!
Post by: MisterKnife on Sun, 05 July 2020, 00:18:13
just MX and no bluetooth. qmk with stm32 does not work with bluetooth yet.
- STM32
- QMK compatible
- ESD protection
- Case grounded
- 6 RGB leds
- Molex pico connector between the two boards
- No iso layout or split spacebar
- No leds for the keys (backlight)
I'll make a google form later today. unsure yet how to handle shipping in what is cheapest / best.
Shipping will be from the Netherlands
I'm interested. It would probably be a good idea to post a picture showing supported layouts. This PCB probably needs an IC thread of its own.
Yes will do it through the correct channels and own thread. More on that later.
Post by: Wojciech on Sun, 05 July 2020, 03:05:19
just MX and no bluetooth. qmk with stm32 does not work with bluetooth yet
It’s big problem to add Alps support?
Greetings
Post by: MisterKnife on Sun, 05 July 2020, 03:50:51
just MX and no bluetooth. qmk with stm32 does not work with bluetooth yet
It’s big problem to add Alps support?
Greetings
I'll try.
Post by: Wojciech on Sun, 05 July 2020, 03:52:37
Post by: MisterKnife on Sun, 05 July 2020, 03:55:52
Thanks:)
ok alps support is quite easy so I'll add it
Post by: Wojciech on Sun, 05 July 2020, 04:04:24
Post by: lakeboredom on Sun, 05 July 2020, 04:43:21
Post by: MisterKnife on Sun, 05 July 2020, 07:18:49
https://forms.gle/oiq6L54oDEcxB3Sx6 (https://forms.gle/oiq6L54oDEcxB3Sx6)
Post by: MisterKnife on Sun, 05 July 2020, 10:42:20
Post by: ZyBeR on Sun, 12 July 2020, 14:27:28
Post by: ZyBeR on Sun, 12 July 2020, 15:47:37
Moved the jumper from the stock firmware to qmk... nothing.
Tried several different usb-c cables... nothing.
Tried a PC and a MacBook Pro... nothing.
Connected it to a battery with power display, it does something and consumes 5.1v but the leds wont turn on.
This is a brand new v2.0.4 pcb, I'm not sure but I think I might even have tested it when I received it. Since then it's just been laying in it's esd bag in a box, untouched so I can't really see what can have happened to it.
Is there something I've completely missed that I can try? It's really f-cking annoying that I still haven't been able to use my ca66 since the gb like 2 years ago..
Post by: child on Mon, 13 July 2020, 13:54:08
Once I had a problem that the keyboard always started in bootloader mode due to a short.
With CA66 specifically I had problems with desoldering, because - due to the wires in PCB - it's very easy to cause a short.
Post by: YangYoga on Wed, 29 July 2020, 12:34:00
Love
Post by: MisterKnife on Wed, 29 July 2020, 15:40:45
Please if anyone has an extra PCB email me at jonas@yangyoga.dk mine is broken and I can't fix it.
Love
you've just missed my GB for replacement PCBs for the CA66. keep an eye on https://geekhack.org/index.php?topic=107319.0
I will update that in a month or so to see if there is any interest still
Post by: browniesbee on Sun, 02 August 2020, 23:33:55
Please if anyone has an extra PCB email me at jonas@yangyoga.dk mine is broken and I can't fix it.
Love
you've just missed my GB for replacement PCBs for the CA66. keep an eye on https://geekhack.org/index.php?topic=107319.0
I will update that in a month or so to see if there is any interest still
Just filled in the IC for the replacement PCBs. Hope it will come back soon!
Post by: Argan12345 on Fri, 18 December 2020, 22:00:53
(https://i.imgur.com/1Yj1X8t.jpg)
Does anyone know where can I get a replacement for a 5-pin to 5-pin PCB to daughterboard connector?
Post by: Argan12345 on Sun, 20 December 2020, 15:22:14
Phuckkk...Show Image(https://i.imgur.com/1Yj1X8t.jpg)
Does anyone know where can I get a replacement for a 5-pin to 5-pin PCB to daughterboard connector?
For posterity, it's apparently a ZH 1.5mm Pitch which you can get from here: https://www.aliexpress.com/item/32859226460.html
Close up pic: (https://i.imgur.com/1ClAoTk.jpg)
Post by: ender526 on Sun, 10 January 2021, 11:13:09
Post by: ender526 on Mon, 11 January 2021, 09:26:31
Post by: pixelpusher on Mon, 11 January 2021, 11:47:19
As an update, I opened the board and used a multimeter across the contacts of each of the 4 dead switches. My multimeter beeps when each of the 4 keys are pressed, so the switches are fine. The signal just isn't getting to the controller. Can traces go bad on their own without any trauma to the board?
It has to either be corrupt firmware, a scratched trace, connection to MCU gone, or Chip fragged.
It is certainly possible for the solder joint on the controller that connects to the trace to fail. There is very little contact there to begin with. Any condition such as temperature/humidty change or a possible vibration from moving or even static shock could have possibly broken it loose. This time of year I would usually assume it was something caused by static shock. Possibly corrupting the firmware, possibly fying the processor.
Are you absolutely certain you didn't do anything recently that could have scratched a trace? Did you have a stabilizer pop loose and try to get it back in? Random, but I scratched a trace doing that once and didn't put two and two together even after several days of troubleshooting.
If it was my board, I would start by re-flashing the firmware. If that doesn't work, you could try to find the pin on the chip that controls that column. That's a bit hard for me to do with my multimeter b/c it sucks... ha. So I, personally, would reflow the pins on the MCU. Add flux to all of the pins on the chip and use a flat tip iron to hold on heat for a few seconds across several pins at once while keeping a small bit of pressure on the MCU with some tweezers or such.
Post by: ender526 on Mon, 11 January 2021, 12:10:27
Post by: pixelpusher on Mon, 11 January 2021, 15:57:06
Thanks for the suggestions. I would reflash the firmware but annoyingly enough the ESC key is one of the 4 that is bad. Is there another way to get it into bootloader mode?
Default reset appears to be fn + O according to some online searching. But if that doesn't work I'd probably reflow the MCU.
Post by: soloplayer on Wed, 13 January 2021, 00:47:06
Post by: aslanxdeft on Wed, 13 January 2021, 08:46:02
will there be r3 for ca66? i'm quite new for this hobby, so i am very sad that i didnt this GB earlier :(Someone asked them on their IG and they said it may or may not happen. :cool:
Post by: lakeboredom on Tue, 22 March 2022, 20:11:30
Post by: ZyBeR on Tue, 22 March 2022, 20:19:28
Post by: MrPretty on Wed, 18 May 2022, 12:16:18
will there be r3 for ca66? i'm quite new for this hobby, so i am very sad that i didnt this GB earlier :(
FYI R3 is up on Play Keyboards website
Post by: lakeboredom on Wed, 18 May 2022, 17:58:27
will there be r3 for ca66? i'm quite new for this hobby, so i am very sad that i didnt this GB earlier :(
FYI R3 is up on Play Keyboards website
Oh the colors are so nice this round! I don't need a second ca66. I don't need another ca66. I don't need. I dont. I...
Post by: ZyBeR on Fri, 20 May 2022, 00:52:13
Post by: rpiguy9907 on Sun, 22 May 2022, 21:39:13
https://www.play-keyboard.store/collections/feature-on-homepage/products/-pre-sale-ca66-keyboard-kit-round-3
Post by: lakeboredom on Fri, 16 September 2022, 03:41:32