Author Topic: [GB] MIRA SE - Custom 80% Keyboard (CLOSED)  (Read 494068 times)

0 Members and 1 Guest are viewing this topic.

Offline Photoelectric

  • * Administrator
  • Posts: 6766
Re: [GB] MIRA SE - Custom 80% Keyboard (ORDER VERIFICATION - Info in the OP)
« Reply #350 on: Sun, 12 February 2017, 18:40:30 »
Numbered slots have been added to the order verification spreadsheet linked in the OP.
- Keyboards: LZ-GH (Jailhouse Blues)M65-a, MIRA SE, E8-V1, MOON TKL, CA66
- Keyboard Case Painting Tips -
- Join Mechanical Keyboards photography group on Flickr -

Offline LightningXI

  • * Elevated Elder
  • Posts: 4280
  • Location: New York
  • PPD
    • ArtisanMacro
Re: [GB] MIRA SE - Custom 80% Keyboard (ORDER VERIFICATION - Info in the OP)
« Reply #351 on: Sun, 12 February 2017, 18:46:40 »
Numbered slots have been added to the order verification spreadsheet linked in the OP.

Thank you based gods of RNG! Thank you, Photoelectric, for quick organization!

Offline xondat

  • i'm not a star
  • * Maker
  • Posts: 5366
  • Location: United Kingdom
Re: [GB] MIRA SE - Custom 80% Keyboard (ORDER VERIFICATION - Info in the OP)
« Reply #352 on: Sun, 12 February 2017, 18:52:53 »
Just saw the price of my invoice... Oh boy. Especially with shipping this will be one expensive keyboard.

Offline Photoelectric

  • * Administrator
  • Posts: 6766
Re: [GB] MIRA SE - Custom 80% Keyboard (ORDER VERIFICATION - Info in the OP)
« Reply #353 on: Sun, 12 February 2017, 18:55:02 »
Just saw the price of my invoice... Oh boy. Especially with shipping this will be one expensive keyboard.

You did get a bunch of extras!  If you want any of them removed from your order, let me know :)
- Keyboards: LZ-GH (Jailhouse Blues)M65-a, MIRA SE, E8-V1, MOON TKL, CA66
- Keyboard Case Painting Tips -
- Join Mechanical Keyboards photography group on Flickr -

Offline eyedrop

  • Posts: 601
  • Location: Keeb Abyss
Re: [GB] MIRA SE - Custom 80% Keyboard (ORDER VERIFICATION - Info in the OP)
« Reply #354 on: Sun, 12 February 2017, 19:00:04 »
Numbered slots have been added to the order verification spreadsheet linked in the OP.

Thank you based gods of RNG! Thank you, Photoelectric, for quick organization!

Congrats!  I know you were looking for a number at the last minute.  It works out for you in the end!   :thumb:

Offline LightningXI

  • * Elevated Elder
  • Posts: 4280
  • Location: New York
  • PPD
    • ArtisanMacro
Re: [GB] MIRA SE - Custom 80% Keyboard (ORDER VERIFICATION - Info in the OP)
« Reply #355 on: Sun, 12 February 2017, 19:07:37 »
Congrats!  I know you were looking for a number at the last minute.  It works out for you in the end!   :thumb:

Thank you!

So do the newly numbered kits all come with Zeal stabs? This is great news, as I would have had to get some for a few custom boards.

Offline breusch91

  • * Maker
  • Posts: 259
Re: [GB] MIRA SE - Custom 80% Keyboard (ORDER VERIFICATION - Info in the OP)
« Reply #356 on: Sun, 12 February 2017, 19:16:42 »
Numbered slots have been added to the order verification spreadsheet linked in the OP.

Hey photo just wondering if the steel/aluminum spacer still had a shot? I know you said it'd be looked into more after chinese new year, i don't expect it to be something added to the original invoice, but any shot of it still happening during this GB and just receiving another invoice for it along with the shipping for current GB members that decide they want it?

Offline Photoelectric

  • * Administrator
  • Posts: 6766
Re: [GB] MIRA SE - Custom 80% Keyboard (ORDER VERIFICATION - Info in the OP)
« Reply #357 on: Sun, 12 February 2017, 19:18:05 »
I don't know, I'm sorry.  I'm only helping with the logistics of the ordering part, I don't actually have any executive role in the GB.  Hopefully ninjadoc will post about it when he knows the answer.
- Keyboards: LZ-GH (Jailhouse Blues)M65-a, MIRA SE, E8-V1, MOON TKL, CA66
- Keyboard Case Painting Tips -
- Join Mechanical Keyboards photography group on Flickr -

Offline breusch91

  • * Maker
  • Posts: 259
Re: [GB] MIRA SE - Custom 80% Keyboard (ORDER VERIFICATION - Info in the OP)
« Reply #358 on: Sun, 12 February 2017, 19:21:28 »
I don't know, I'm sorry.  I'm only helping with the logistics of the ordering part, I don't actually have any executive role in the GB.  Hopefully ninjadoc will post about it when he knows the answer.

Gotcha, no worries. Just wondering as I have no plans to use RGB.  Anyway just wanted to say thanks for being on top of things, you've been very helpful with all my questions/pms today and everyone elses, thanks for all the quick answers

Offline mason

  • have fun with her, ryan
  • Posts: 515
  • Location: LFK
Re: [GB] MIRA SE - Custom 80% Keyboard (ORDER VERIFICATION - Info in the OP)
« Reply #359 on: Sun, 12 February 2017, 21:18:39 »
I suddenly like 24 a lot more. Thanks, Photoelectric  :)

Offline rotciveel

  • Posts: 137
  • Location: Houston, TX
  • Fugu Curator Extraordinaire
Re: [GB] MIRA SE - Custom 80% Keyboard (ORDER VERIFICATION - Info in the OP)
« Reply #360 on: Sun, 12 February 2017, 21:37:01 »
So do the newly numbered kits all come with Zeal stabs? This is great news, as I would have had to get some for a few custom boards.

Sweet I got a number too! Thanks!!!

I have the same question as this too :p

Offline -musubi

  • Posts: 579
  • Location: West Coast Best Coast (US)
  • Spam rice 'n eggs
Re: [GB] MIRA SE - Custom 80% Keyboard (ORDER VERIFICATION - Info in the OP)
« Reply #361 on: Sun, 12 February 2017, 22:14:39 »
Dang no RNG number for me :( if anyone doesn't want theirs let me know!

Offline roostrc0gburn

  • * Esteemed Elder
  • Posts: 1444
  • Location: Oregon
  • its just plastic
Re: [GB] MIRA SE - Custom 80% Keyboard (ORDER VERIFICATION - Info in the OP)
« Reply #362 on: Sun, 12 February 2017, 22:28:19 »
now, what about the possibility of a stainless steel "diffuser" ? as an optional add-on

Offline breusch91

  • * Maker
  • Posts: 259
Re: [GB] MIRA SE - Custom 80% Keyboard (ORDER VERIFICATION - Info in the OP)
« Reply #363 on: Sun, 12 February 2017, 22:29:30 »
now, what about the possibility of a stainless steel "diffuser" ? as an optional add-on
Read the comments above, I just asked that as well


Sent from my iPhone using Tapatalk

Offline Photoelectric

  • * Administrator
  • Posts: 6766
Re: [GB] MIRA SE - Custom 80% Keyboard (ORDER VERIFICATION - Info in the OP)
« Reply #364 on: Sun, 12 February 2017, 22:33:35 »
I've asked ninjadoc for an update about the metal inserts as an alternative for the acrylic diffuser, and unfortunately at the moment they are not possible.
- Keyboards: LZ-GH (Jailhouse Blues)M65-a, MIRA SE, E8-V1, MOON TKL, CA66
- Keyboard Case Painting Tips -
- Join Mechanical Keyboards photography group on Flickr -

Offline flopix

  • Posts: 40
  • Location: Europe
    • Laur
Re: [GB] MIRA SE - Custom 80% Keyboard (ORDER VERIFICATION - Info in the OP)
« Reply #365 on: Mon, 13 February 2017, 04:50:38 »
So how can I get my user to be blue on the order sheet? :)

Offline Photoelectric

  • * Administrator
  • Posts: 6766
Re: [GB] MIRA SE - Custom 80% Keyboard (ORDER VERIFICATION - Info in the OP)
« Reply #366 on: Mon, 13 February 2017, 11:33:44 »
Those are just forum designations left-over from the main order spreadsheet.  Orange for GH.
- Keyboards: LZ-GH (Jailhouse Blues)M65-a, MIRA SE, E8-V1, MOON TKL, CA66
- Keyboard Case Painting Tips -
- Join Mechanical Keyboards photography group on Flickr -

Offline stillzman

  • Posts: 134
Re: [GB] MIRA SE - Custom 80% Keyboard (ORDER VERIFICATION - Info in the OP)
« Reply #367 on: Mon, 13 February 2017, 11:50:13 »
sorry if this has been asked before but when will the invoices go out?

Offline Photoelectric

  • * Administrator
  • Posts: 6766
Re: [GB] MIRA SE - Custom 80% Keyboard (ORDER VERIFICATION - Info in the OP)
« Reply #368 on: Mon, 13 February 2017, 11:55:55 »
sorry if this has been asked before but when will the invoices go out?

Soon, after order verification.
. . .

I have a confirmation from ZealPC that all 57 numbered slot holders will receive the stabilizers :D
If you have a number and did not order a winkeyless board, please PM me whether you intend to use a 7x spacebar or 6.25x spacebar with your MIRA.  Winkeyless orders will go with 7x stabilizers, naturally.
« Last Edit: Mon, 13 February 2017, 12:38:10 by Photoelectric »
- Keyboards: LZ-GH (Jailhouse Blues)M65-a, MIRA SE, E8-V1, MOON TKL, CA66
- Keyboard Case Painting Tips -
- Join Mechanical Keyboards photography group on Flickr -

Offline flopix

  • Posts: 40
  • Location: Europe
    • Laur
Re: [GB] MIRA SE - Custom 80% Keyboard (ORDER VERIFICATION - Info in the OP)
« Reply #369 on: Mon, 13 February 2017, 13:27:04 »
Those are just forum designations left-over from the main order spreadsheet.  Orange for GH.

Oh! Now I feel specialerer :)

Offline flopix

  • Posts: 40
  • Location: Europe
    • Laur
Re: [GB] MIRA SE - Custom 80% Keyboard (ORDER VERIFICATION - Info in the OP)
« Reply #370 on: Mon, 13 February 2017, 13:39:18 »
...

I have a confirmation from ZealPC that all 57 numbered slot holders will receive the stabilizers :D
If you have a number and did not order a winkeyless board, please PM me whether you intend to use a 7x spacebar or 6.25x spacebar with your MIRA.  Winkeyless orders will go with 7x stabilizers, naturally.

6.25 for me

Offline mason

  • have fun with her, ryan
  • Posts: 515
  • Location: LFK
Re: [GB] MIRA SE - Custom 80% Keyboard (ORDER VERIFICATION - Info in the OP)
« Reply #371 on: Mon, 13 February 2017, 16:09:32 »
So the 57 numbered slot holders get gold screw-in stabilizers?

Offline iamtootallforthis

  • Something a lot Funnier
  • * Global Moderator
  • Posts: 4739
  • Location: West Palm Beach, FL
  • I like green stuffs.
    • WTB/WTTF Thread
Re: [GB] MIRA SE - Custom 80% Keyboard (ORDER VERIFICATION - Info in the OP)
« Reply #372 on: Mon, 13 February 2017, 16:17:22 »
So the 57 numbered slot holders get gold screw-in stabilizers?

Yes.

Offline Captainbuttmonkey

  • Posts: 319
  • Location: UK
Re: [GB] MIRA SE - Custom 80% Keyboard (ORDER VERIFICATION - Info in the OP)
« Reply #373 on: Mon, 13 February 2017, 18:19:59 »
Omg, over the moon to have been given a number =]

Offline Rayoui

  • Posts: 298
  • Location: Portland, OR
Re: [GB] MIRA SE - Custom 80% Keyboard (ORDER VERIFICATION - Info in the OP)
« Reply #374 on: Mon, 13 February 2017, 23:37:36 »
If anyone that missed out on a number really wants the gold screw-in stabs, Massdrop is running a drop for them for the next day or so. If you miss that one, Zeal is also running a GB for them on his site, though I believe the wait may be a little longer.
Mira SE  |  Clueboard  |   B.face  |  HHKB Type-S

Offline breusch91

  • * Maker
  • Posts: 259
Re: [GB] MIRA SE - Custom 80% Keyboard (ORDER VERIFICATION - Info in the OP)
« Reply #375 on: Mon, 13 February 2017, 23:44:24 »
If anyone that missed out on a number really wants the gold screw-in stabs, Massdrop is running a drop for them for the next day or so. If you miss that one, Zeal is also running a GB for them on his site, though I believe the wait may be a little longer.
Wait might be longer but they'd still be here before you get this board


Sent from my iPhone using Tapatalk

Offline Sissy

  • Posts: 494
  • Location: Australia
Re: [GB] MIRA SE - Custom 80% Keyboard (ORDER VERIFICATION - Info in the OP)
« Reply #376 on: Tue, 14 February 2017, 03:08:24 »
If anyone that missed out on a number really wants the gold screw-in stabs, Massdrop is running a drop for them for the next day or so. If you miss that one, Zeal is also running a GB for them on his site, though I believe the wait may be a little longer.
Luckily got myself some stabs the last drop, they look great
well worth picking up over normal ones if you got the money to spend

Offline roostrc0gburn

  • * Esteemed Elder
  • Posts: 1444
  • Location: Oregon
  • its just plastic
Re: [GB] MIRA SE - Custom 80% Keyboard (ORDER VERIFICATION - Info in the OP)
« Reply #377 on: Tue, 14 February 2017, 12:16:36 »
has anyone tested the screw-in type with the pcb? i would like to avoid a similar situation to what jake found with his duck pcb:

https://geekhack.org/index.php?topic=78549.msg2332847#msg2332847

maybe  include a few clear plastic washers?

Offline kawasaki161

  • Posts: 1059
  • Location: Germany
Re: [GB] MIRA SE - Custom 80% Keyboard (ORDER VERIFICATION - Info in the OP)
« Reply #378 on: Tue, 14 February 2017, 12:40:53 »
has anyone tested the screw-in type with the pcb? i would like to avoid a similar situation to what jake found with his duck pcb:

https://geekhack.org/index.php?topic=78549.msg2332847#msg2332847

maybe  include a few clear plastic washers?

If it is a TX87 PCB then Zeals screw in stabs did not have a problem with the screws being close to the pads. At least not with a standard layout.

Offline Photoelectric

  • * Administrator
  • Posts: 6766
Re: [GB] MIRA SE - Custom 80% Keyboard (ORDER VERIFICATION - Info in the OP)
« Reply #379 on: Tue, 14 February 2017, 14:03:26 »
has anyone tested the screw-in type with the pcb? i would like to avoid a similar situation to what jake found with his duck pcb:

https://geekhack.org/index.php?topic=78549.msg2332847#msg2332847

maybe  include a few clear plastic washers?

If it is a TX87 PCB then Zeals screw in stabs did not have a problem with the screws being close to the pads. At least not with a standard layout.

I'd just use a couple layers of teflon (pipe) tape over the stabilizer screws and such for insulation.  It's thin, stretchy, and won't interfere with anything.
- Keyboards: LZ-GH (Jailhouse Blues)M65-a, MIRA SE, E8-V1, MOON TKL, CA66
- Keyboard Case Painting Tips -
- Join Mechanical Keyboards photography group on Flickr -

Offline iamtootallforthis

  • Something a lot Funnier
  • * Global Moderator
  • Posts: 4739
  • Location: West Palm Beach, FL
  • I like green stuffs.
    • WTB/WTTF Thread
Re: [GB] MIRA SE - Custom 80% Keyboard (ORDER VERIFICATION - Info in the OP)
« Reply #380 on: Tue, 14 February 2017, 14:22:44 »
has anyone tested the screw-in type with the pcb? i would like to avoid a similar situation to what jake found with his duck pcb:

https://geekhack.org/index.php?topic=78549.msg2332847#msg2332847

maybe  include a few clear plastic washers?

If it is a TX87 PCB then Zeals screw in stabs did not have a problem with the screws being close to the pads. At least not with a standard layout.

I'd just use a couple layers of teflon (pipe) tape over the stabilizer screws and such for insulation.  It's thin, stretchy, and won't interfere with anything.

Plus it'll give the screws a tighter fit into the nuts.

Offline cumwagondeluxe

  • Posts: 22
  • Location: Toronto
Re: [GB] MIRA SE - Custom 80% Keyboard (ORDER VERIFICATION - Info in the OP)
« Reply #381 on: Tue, 14 February 2017, 14:58:46 »
How long do we have to verify/make changes to our orders? I'm still trying to figure out if I want to get an extra plate + switch to steel insert and maybe also switch to a pink case instead of blue :/ Is that one picture in the color reference album still the best we've get as far as getting an idea for what the pink case will look like?

Offline Photoelectric

  • * Administrator
  • Posts: 6766
Re: [GB] MIRA SE - Custom 80% Keyboard (ORDER VERIFICATION - Info in the OP)
« Reply #382 on: Tue, 14 February 2017, 15:03:03 »
Up until ninjadoc is ready to begin invoicing (he's had some computer troubles, but I think they are getting resolved very soon, so any day now).  Please try to decide on any changes ASAP.

There's a whole album for pink next to the pink color in the OP.
- Keyboards: LZ-GH (Jailhouse Blues)M65-a, MIRA SE, E8-V1, MOON TKL, CA66
- Keyboard Case Painting Tips -
- Join Mechanical Keyboards photography group on Flickr -

Offline Photoelectric

  • * Administrator
  • Posts: 6766
Re: [GB] MIRA SE - Custom 80% Keyboard (ORDER VERIFICATION - Info in the OP)
« Reply #383 on: Tue, 14 February 2017, 19:09:42 »
UPDATE:  Invoicing will probably start tomorrow (and will be done in batches).  Please submit any requests for changes ASAP, because once invoices start, there will be no more order changes allowed.
« Last Edit: Wed, 15 February 2017, 14:10:12 by Photoelectric »
- Keyboards: LZ-GH (Jailhouse Blues)M65-a, MIRA SE, E8-V1, MOON TKL, CA66
- Keyboard Case Painting Tips -
- Join Mechanical Keyboards photography group on Flickr -

Offline ninjadoc

  • Thread Starter
  • Posts: 569
  • Location: Cincinnati, OH
Numbered slots have been added to the order verification spreadsheet linked in the OP.

Hey photo just wondering if the steel/aluminum spacer still had a shot? I know you said it'd be looked into more after chinese new year, i don't expect it to be something added to the original invoice, but any shot of it still happening during this GB and just receiving another invoice for it along with the shipping for current GB members that decide they want it?

Right now, no.
After the dust settles, maybe.

Offline ninjadoc

  • Thread Starter
  • Posts: 569
  • Location: Cincinnati, OH
has anyone tested the screw-in type with the pcb? i would like to avoid a similar situation to what jake found with his duck pcb:

https://geekhack.org/index.php?topic=78549.msg2332847#msg2332847

maybe  include a few clear plastic washers?

I haved used the screws  on stabs with the TX 87 and had no problems

Offline Unforgivable

  • Posts: 638
Numbered slots have been added to the order verification spreadsheet linked in the OP.

Hey photo just wondering if the steel/aluminum spacer still had a shot? I know you said it'd be looked into more after chinese new year, i don't expect it to be something added to the original invoice, but any shot of it still happening during this GB and just receiving another invoice for it along with the shipping for current GB members that decide they want it?

Right now, no.
After the dust settles, maybe.

I really hope the steel/aluminum spacer is possible.

Thanks for all your hard work Ninja!

And a massive thanks to Photo for squeezing in my last minute order! You're the best!

I'm still stuck between Winkey and Winkeyless...at the moment I went with Winkey, but Winkeyless looks so nice.

Offline iArson

  • Posts: 434
  • Location: United States
Numbered slots have been added to the order verification spreadsheet linked in the OP.

Hey photo just wondering if the steel/aluminum spacer still had a shot? I know you said it'd be looked into more after chinese new year, i don't expect it to be something added to the original invoice, but any shot of it still happening during this GB and just receiving another invoice for it along with the shipping for current GB members that decide they want it?

Right now, no.
After the dust settles, maybe.

I really hope the steel/aluminum spacer is possible.

Thanks for all your hard work Ninja!

And a massive thanks to Photo for squeezing in my last minute order! You're the best!

I'm still stuck between Winkey and Winkeyless...at the moment I went with Winkey, but Winkeyless looks so nice.
I do too! But it would be completely fine if it's something done after the fact.


Sent from my iPhone using Tapatalk

Offline -musubi

  • Posts: 579
  • Location: West Coast Best Coast (US)
  • Spam rice 'n eggs
Re: [GB] MIRA SE - Custom 80% Keyboard (INVOICING. Order check link in the OP)
« Reply #388 on: Wed, 15 February 2017, 13:18:05 »
Oh boy time to pay the invoice 😭

Offline Photoelectric

  • * Administrator
  • Posts: 6766
Re: [GB] MIRA SE - Custom 80% Keyboard (INVOICING. Order check link in the OP)
« Reply #389 on: Wed, 15 February 2017, 14:08:07 »
Invoicing has begun!

Please be patient, they are done in order and in batches, daily--not all at once.

Remember that these do not include the shipping charge--that will be added at a later date.  In the meantime, the estimates for shipping can be seen posted the beginning of this thread.
« Last Edit: Wed, 15 February 2017, 14:10:02 by Photoelectric »
- Keyboards: LZ-GH (Jailhouse Blues)M65-a, MIRA SE, E8-V1, MOON TKL, CA66
- Keyboard Case Painting Tips -
- Join Mechanical Keyboards photography group on Flickr -

Offline boo

  • Posts: 249
Re: [GB] MIRA SE - Custom 80% Keyboard (INVOICING. Order check link in the OP)
« Reply #390 on: Wed, 15 February 2017, 17:45:42 »
paid invoice  :thumb:

Offline -musubi

  • Posts: 579
  • Location: West Coast Best Coast (US)
  • Spam rice 'n eggs
Re: [GB] MIRA SE - Custom 80% Keyboard (INVOICING. Order check link in the OP)
« Reply #391 on: Wed, 15 February 2017, 18:50:48 »
Just paid mine as well. So much $ but it'll be worth it...

Offline Photoelectric

  • * Administrator
  • Posts: 6766
Re: [GB] MIRA SE - Custom 80% Keyboard (INVOICING. Order check link in the OP)
« Reply #392 on: Wed, 15 February 2017, 19:00:20 »
PSA: Invoicing has started and there will be no more changes to the orders (your order summary is reflected on your invoices).
- Keyboards: LZ-GH (Jailhouse Blues)M65-a, MIRA SE, E8-V1, MOON TKL, CA66
- Keyboard Case Painting Tips -
- Join Mechanical Keyboards photography group on Flickr -

Offline Captainbuttmonkey

  • Posts: 319
  • Location: UK
Re: [GB] MIRA SE - Custom 80% Keyboard (INVOICING. Order check link in the OP)
« Reply #393 on: Wed, 15 February 2017, 19:27:54 »
Paid, cannot wait

Offline Slash Emperor

  • Posts: 461
  • Location: Boston, MA
  • Lust for life lost, keyboards acquired.
Re: [GB] MIRA SE - Custom 80% Keyboard (INVOICING. Order check link in the OP)
« Reply #394 on: Wed, 15 February 2017, 20:54:45 »
Oh shoot, forgot to mention what stab length I wanted for my numbered slot.

Could I go 7u?

Offline noisyturtle

  • * Exalted Elder
  • Posts: 6423
  • comfortably numb
Re: [GB] MIRA SE - Custom 80% Keyboard (INVOICING. Order check link in the OP)
« Reply #395 on: Wed, 15 February 2017, 20:57:37 »
If this is a success do you have any plans for a v2 or something similar?

Offline loud_asian

  • Posts: 591
Re: [GB] MIRA SE - Custom 80% Keyboard (INVOICING. Order check link in the OP)
« Reply #396 on: Wed, 15 February 2017, 21:14:25 »
Oh shoot, forgot to mention what stab length I wanted for my numbered slot.

Could I go 7u?

winkeyless layout orders get 7u stabs by default
EM7 | Nunu | Salamander | RF84u | SS AEK64

Offline Photoelectric

  • * Administrator
  • Posts: 6766
Re: [GB] MIRA SE - Custom 80% Keyboard (INVOICING. Order check link in the OP)
« Reply #397 on: Wed, 15 February 2017, 21:34:32 »
Oh shoot, forgot to mention what stab length I wanted for my numbered slot.

Could I go 7u?

loud_asian beat me to the answer, but yes, that was the decision: all the WKL orders get 7x spacebar stabilizer wire by default.
- Keyboards: LZ-GH (Jailhouse Blues)M65-a, MIRA SE, E8-V1, MOON TKL, CA66
- Keyboard Case Painting Tips -
- Join Mechanical Keyboards photography group on Flickr -

Offline Slash Emperor

  • Posts: 461
  • Location: Boston, MA
  • Lust for life lost, keyboards acquired.
Re: [GB] MIRA SE - Custom 80% Keyboard (INVOICING. Order check link in the OP)
« Reply #398 on: Wed, 15 February 2017, 21:34:56 »
Oh shoot, forgot to mention what stab length I wanted for my numbered slot.

Could I go 7u?

winkeyless layout orders get 7u stabs by default

Ah right. I misread the stab note for the numbered slots, my bad. Guess I'm all set, then.

Offline breusch91

  • * Maker
  • Posts: 259
Re: [GB] MIRA SE - Custom 80% Keyboard (INVOICING. Order check link in the OP)
« Reply #399 on: Thu, 16 February 2017, 00:01:38 »
Couple things, when do the invoices have to be paid by?  And also just a heads up the invoice states "This is a pre-order and production and shipment is expected to take 12 - 14 days after invoices have been paid" , i'm almost positive you meant 12-14 weeks haha, just wanted to let you know!