Price Check- What's it Worth?

[Dreamre]

How much would a pair of Beast switch tools (stainless steel) worth?

around the ori price

What's the original price? I couldn't find anything here. Thank you!

[SpAmRaY]

How much would a pair of Beast switch tools (stainless steel) worth?

around the ori price

What's the original price? I couldn't find anything here. Thank you!

From the sale of steel beast switch opening tools in August 2013 with shipping (CONUS) it was around $17 for 1 pair and $30 for 2 pair for international it was around $21 and $35 respectively.

[just1n]

What is g80-5000 haaus his price In good conditio, No box..
In addition, there are also 2100 hbg. Fineness general. Cap missing. Thank you.

Thank you, but I still do not know what g80-2100hbg price?
(Attachment Link)
(Attachment Link)

Hmn, has lot of strange legend... I think if you could fix some of the wrong keys like get a correct numpad enter and find something with right row instead of PAGE DOWN, and something better than those other profile Windows key you stuck in the cursor block... you maybe could get something closer to $100.

Thank u. This price is my unexpected. I think it's worth the old black shaft,
Thank you for your price guide, I now go to publish a [WTS]

[IvanIvanovich]

Well... it had lot of odd key, even if they are only pad print they are some pretty unusual legend which may interest some, also 122 key have become more popular again and since they haven't been made by Cherry in decades of course the supply is limited.

[Blackehart]

In clearing out an old office, I found these two boards...
Think I might use them as bartering tools for an mx clack?


Are they worth something?






Please say yes!

><'

[SpAmRaY]

In clearing out an old office, I found these two boards...
Think I might use them as bartering tools for an mx clack?


Are they worth something?

Show Image

Show Image

Show Image

Show Image

Please say yes!

><'

~$15 or less for the ML board

[Blackehart]

dawww -_-'

Thx for the input!

[fohat.digs]

Are they worth something?

That IBM is the rubber dome version of the Model M.

I have never gotten more than $15 + shipping for one, but it is a nice board anyway.

[sethk_]

How much is the SoWare keyset worth?

[HoffmanMyster]

How much is the SoWare keyset worth?

I don't remember one selling since late 2013 when jcrouse cleaned house, and he sold 2 86-key sets for $175 each.  link 

Their rarity makes them rather valuable (you probably know that).  If a seller wanted to sell them for more than what jcrouse sold them for, I'm almost positive they could.  Take that for whatever you want. 

[sethk_]

How much is the SoWare keyset worth?

I don't remember one selling since late 2013 when jcrouse cleaned house, and he sold 2 86-key sets for $175 each.  link 

Their rarity makes them rather valuable (you probably know that).  If a seller wanted to sell them for more than what jcrouse sold them for, I'm almost positive they could.  Take that for whatever you want. 

Ok, I was actually looking if a price I saw was accurate and it is, thanks!

[heedpantsnow]

How much is the SoWare keyset worth?

I don't remember one selling since late 2013 when jcrouse cleaned house, and he sold 2 86-key sets for $175 each.  link 

Their rarity makes them rather valuable (you probably know that).  If a seller wanted to sell them for more than what jcrouse sold them for, I'm almost positive they could.  Take that for whatever you want. 

That sale was legendary.

[Signature]

How much is the SoWare keyset worth?

I don't remember one selling since late 2013 when jcrouse cleaned house, and he sold 2 86-key sets for $175 each.  link 

Their rarity makes them rather valuable (you probably know that).  If a seller wanted to sell them for more than what jcrouse sold them for, I'm almost positive they could.  Take that for whatever you want. 

That sale was legendary.

the #hype was real

[MidnightXZ]

How much would a lightly used, 3 weeks old Filco Majestouch 2 MX Brown (US ANSI 104) with bpiphany's Kitten Paw custom controller be worth?

[h2gofast]

Very Minty  IBM Model M  Blue Label made by Lexmark I think it's been sitting in the box since 1995.  Plugged it in and everything works, keys, lights.  Is there still a market for the Lexmarks, I have a 1391401 and the feel is very very similar.  It's more subtle than I can distinguish.    No dust or debris under the keys. 
Cheers 

[Bakgrund]

How much could I get for a stock, unused quickfire rapid ISO keycap set?

[Signature]

How much could I get for a stock, unused quickfire rapid ISO keycap set?

5-10 dollars under ori price

[nubbinator]

How much could I get for a stock, unused quickfire rapid ISO keycap set?

5-10 dollars under ori price

It's just the key caps, not the board.


Honestly, I'd say $5-10 max for the caps.  They're not high quality and the demand is very low.

[Spidersx]

How much should I try selling a brand new Corsair K60 for?

[MGH]

What's the current market price for an used 10th anniversary JIS Variable weighted Realforce?

Also what's the prices for used HHKB silenced, non silenced, and Dyesub Leopold F660C?

[just1n]

Sir, g81-3077's worth what. Hat did not yellowed. Did not shine. There is no box.my pcb not work.

[IvanIvanovich]

$125 would be about right for NCR 3077 that seems to be like new. Though, just the caps and casebody really.

[just1n]

$125 would be about right for NCR 3077 that seems to be like new. Though, just the caps and casebody really.

Well, $ 125 is a good price, but where I am, I can only buy cap.
Thank you very much.
This is indeed a new cap.

[Signature]

price for a Cherry sav, hasro and sat?

[bowji]

Can I get a price check for a Model M SSK Ive got my eyes on?
Doesn't come with original box but it has a detachable cable still wrapped(ps/2). The keyboard itself has been used but doesnt have any cosmetic issues. White label. Overall, very clean and well managed. No specific mods listed.
Thanks in advance <3

[Flyersfan1]

Show Image

Can I get a price check for a Model M SSK Ive got my eyes on?
Doesn't come with original box but it has a detachable cable still wrapped(ps/2). The keyboard itself has been used but doesnt have any cosmetic issues. White label. Overall, very clean and well managed. No specific mods listed.
Thanks in advance <3

$200 Shipped is what I've seen most SSK's going for these days(including mine)

[fohat.digs]

$200 Shipped is what I've seen most SSK's going for

Maybe somewhat more for a very early date in excellent condition.

[IvanIvanovich]

price for a Cherry sav, hasro and sat?

About $200-250 each for NIB/mint. Maybe $150-175 for ones that are visibly used but still good.

[intelli78]

price for a Cherry sav, hasro and sat?

About $200-250 each for NIB/mint. Maybe $150-175 for ones that are visibly used but still good.

Maybe those numbers were accurate in 2009-2010. Today, those boards would fetch far more (assuming anyone ever wanted to sell). $500+ for used, NIB even more I expect, maybe up to $800-900 range. $200-250 is just not realistic at all.

[Signature]

price for a Cherry sav, hasro and sat?

About $200-250 each for NIB/mint. Maybe $150-175 for ones that are visibly used but still good.

Maybe those numbers were accurate in 2009-2010. Today, those boards would fetch far more (assuming anyone ever wanted to sell). $500+ for used, NIB even more I expect, maybe up to $800-900 range. $200-250 is just not realistic at all.

I'm currently not selling any but I just wanted a price point, but thank you all for the millions of pms anyway

[Photekq]

Maybe those numbers were accurate in 2009-2010. Today, those boards would fetch far more (assuming anyone ever wanted to sell). $500+ for used, NIB even more I expect, maybe up to $800-900 range. $200-250 is just not realistic at all.

It depends on the market you're selling them on. On GH, I expect SAV/HASRO would fetch around $350-450 NIB, but on other markets I'm sure they could get much more.

SAT wouldn't fetch anywhere near $800-900, even NIB. They usually sell around $350 NIB.

Btw, the boards Signature is talking about are used but very good condition. Except the SAT, which is NIB.

[Firebolt1914]

Is a DS3 w/ Vortex doubleshot PBT caps = RF TKL?

[Flyersfan1]

Is a DS3 w/ Vortex doubleshot PBT caps = RF TKL?

Maybe to someone who is specifically looking for that combo, but my guess is no.

[Firebolt1914]

Is a DS3 w/ Vortex doubleshot PBT caps = RF TKL?

Maybe to someone who is specifically looking for that combo, but my guess is no.

That's what I was thinking as well. Thanks.

[intelli78]

It depends on the market you're selling them on. On GH, I expect SAV/HASRO would fetch around $350-450 NIB, but on other markets I'm sure they could get much more.

SAT wouldn't fetch anywhere near $800-900, even NIB. They usually sell around $350 NIB.

Btw, the boards Signature is talking about are used but very good condition. Except the SAT, which is NIB.

Sure, the SAT would not, but the Cyrillic keyboards would fetch a premium for sure. I bet they would be snapped up within a day at $350 on GH -- probably even at $450. Of course I am only speculating, have not witnessed any being sold during my time on GH. Just my gut feeling.

[Photekq]

I bet they would be snapped up within a day at $350 on GH -- probably even at $450.

I can guarantee this, because I would be the buyer if one popped up for that price

It's strange though. October 2013 there was a mint, no box, HASRO for sale for $290. It took weeks/months to sell iirc. I really wish I had bought it back then, but I was a newb.

[just1n]

I bet they would be snapped up within a day at $350 on GH -- probably even at $450.

I can guarantee this, because I would be the buyer if one popped up for that price

It's strange though. October 2013 there was a mint, no box, HASRO for sale for $290. It took weeks/months to sell iirc. I really wish I had bought it back then, but I was a newb.

I know someone in the sale sav and hav. They are new. Packaged .NIB. But $ 450,, not buy it.
To be sure, the seller is hav and sav while sales.

[IvanIvanovich]

You can get 98% identical sets in current production, made with the same tooling. I have no idea why someone would pay 4x as much just because it older.

[Photekq]

You can get 98% identical sets in current production, made with the same tooling. I have no idea why someone would pay 4x as much just because it older.

Well, mainly because it's the original. Not everyone buys keyboards just for use, some people like to collect vintage boards. Also, some people cannot stand f/j with nubs and find them really uncomfortable, and some people don't like to have a wonky/too short right shift.

Oh, and you do also get a nice ANSI G80 along with the keycaps in the case of the ESA.

[fohat.digs]

price for a Cherry sav, hasro and sat?

Please pardon my ignorance and curiosity, but what are sav, hasro, and sat?

[davkol]

price for a Cherry sav, hasro and sat?

Please pardon my ignorance and curiosity, but what are sav, hasro, and sat?

See Cherry product codes, the last few letters in the code.

[Photekq]

SAV is referring to Cherry G81-3000SAV, with thick PBT dyesub Russian ANSI
HASRO is referring to Cherry ESA-3000-HASRO - PBT dyesub Russian again (despite the H), but G80 instead of G81
SAT is referring to Cherry G81-3004SAT - Peacock branded board with PBT dyesub Czech keycaps

[bowji]

More

Show Image

Can I get a price check for a Model M SSK Ive got my eyes on?
Doesn't come with original box but it has a detachable cable still wrapped(ps/2). The keyboard itself has been used but doesnt have any cosmetic issues. White label. Overall, very clean and well managed. No specific mods listed.
Thanks in advance <3

$200 Shipped is what I've seen most SSK's going for these days(including mine)

$200 Shipped is what I've seen most SSK's going for

Maybe somewhat more for a very early date in excellent condition.

Thanks <3
Hopefully its a safe bet to pull the trigger for one under 200.

[IvanIvanovich]

You can get 98% identical sets in current production, made with the same tooling. I have no idea why someone would pay 4x as much just because it older.

Well, mainly because it's the original. Not everyone buys keyboards just for use, some people like to collect vintage boards. Also, some people cannot stand f/j with nubs and find them really uncomfortable, and some people don't like to have a wonky/too short right shift.

Oh, and you do also get a nice ANSI G80 along with the keycaps in the case of the ESA.

I feel you, and I understand collecting... but some of the very high prices are surely reality distortion or simply madness. Unique models like say the 5000, or ones with some personality like some of the odd 0*** stuff from before the time of layout standardization that will NEVER EVER EVER likely be made again I can understand higher price. Its a finite thing, not likely to be reproed... I get that. Paying tons of money for plain 3000 boards, essentially just for keysets that can still be made... nope. Should originals command a price premium? Well sure, but it should be reasonable.

[Photekq]

I feel you, and I understand collecting... but some of the very high prices are surely reality distortion or simply madness. Unique models like say the 5000, or ones with some personality like some of the odd 0*** stuff from before the time of layout standardization that will NEVER EVER EVER likely be made again I can understand higher price. Its a finite thing, not likely to be reproed... I get that. Paying tons of money for plain 3000 boards, essentially just for keysets that can still be made... nope. Should originals command a price premium? Well sure, but it should be reasonable.

What I'm trying to say is that _exact_ replicas can't be made. Yes, they are very, very similar - almost identical. But they are not exactly the same. Different dyesubbing equipment [for imsto's run anyway], no scooped f/j, no spacebar, messed up right shift. If it were possible to make _exact_ replicas of Cherry dyesubs, like we are able to make exact replicas of Cherry doubleshots [although nobody has due to poor legend choice] then I would agree with you 100%. I would not pay tonnes if I could get an exact replica of Cherry dyesubs, but unfortunately I can't. This is why I think the much higher prices of $350-450 are justified. That said, I think people who will pay $750+ for a 3000 are a bit insane.

[MGH]

What is the price range for used regular HHKB?

[ComradeSniper]

What is the price range for used regular HHKB?

$200+Shipping, perhaps a little less.

[ghostjuggernaut]

I recently came into the possession of 2 Lexmark model m SSK p/n: 1397961. One is in very good condition. The second is in okay condition and missing the AT cable. I am just wondering what these are worth? I haven't been able to find much information online about it, only a post from 2011 regarding one that was sold on eBay. Any help would be appreciated.

[spale]

What would be good price for used Realforce 86U? Wanted to introduced younger bro with Topre world, so just got an idea to buy some used Topre.

[Ngt]

What would be good price for used Realforce 86U? Wanted to introduced younger bro with Topre world, so just got an idea to buy some used Topre.

In US or EU?