Author Topic: Post your G80-1800 pictures (Read 530473 times)

quochung1989 · « **Reply #450 on:** Mon, 08 February 2016, 07:46:19 »

I see

)
I read your post on DT. Did you spare 1800 pcb? (Of course I 'm interested ANSI).

jerue · « **Reply #451 on:** Mon, 08 February 2016, 18:32:50 »

Quote from: quochung1989 on Mon, 08 February 2016, 07:46:19

I see )
I read your post on DT. Did you spare 1800 pcb? (Of course I 'm interested ANSI).

If you want a PCB that is essentially broken and with only switch bottoms..sure. But shipping costs would be pretty high.

alienman82 · « **Reply #452 on:** Mon, 08 February 2016, 18:36:20 »

removed.

DanielT · « **Reply #453 on:** Wed, 10 February 2016, 06:13:35 »

This was a HAD 1800, now it's a unicorn, my wife wanted a happy keyboard so I made this for her, I made her happy because she is the best wife a man can wish for

The caps are a mix of almost everything, JTK Purple for alphas, Hyperfuse for Numpad, GMK Purple for ISO Enter, CYMW mods and the Rustler because she deserves only the best. The switches are the original MX Blacks, she loves to type on them.

azhdar · « **Reply #454 on:** Wed, 10 February 2016, 09:48:04 »

Quote from: DanielT on Wed, 10 February 2016, 06:13:35

This was a HAD 1800, now it's a unicorn, my wife wanted a happy keyboard so I made this for her, I made her happy because she is the best wife a man can wish for
The caps are a mix of almost everything, JTK Purple for alphas, Hyperfuse for Numpad, GMK Purple for ISO Enter, CYMW mods and the Rustler because she deserves only the best. The switches are the original MX Blacks, she loves to type on them.

Show Image

Well that is colored. :|

DanielT · « **Reply #455 on:** Wed, 10 February 2016, 11:29:32 »

Quote from: azhdar on Wed, 10 February 2016, 09:48:04

Quote from: DanielT on Wed, 10 February 2016, 06:13:35
This was a HAD 1800, now it's a unicorn, my wife wanted a happy keyboard so I made this for her, I made her happy because she is the best wife a man can wish for
The caps are a mix of almost everything, JTK Purple for alphas, Hyperfuse for Numpad, GMK Purple for ISO Enter, CYMW mods and the Rustler because she deserves only the best. The switches are the original MX Blacks, she loves to type on them.

Show Image

Well that is colored. :|

Well, yes :)) But I'm man enough to type on my wife's keyboard :))

Steezus · « **Reply #456 on:** Wed, 10 February 2016, 11:35:11 »

Quote from: DanielT on Wed, 10 February 2016, 06:13:35

I made her happy because she is the best wife a man can wish for

She was definitely looking over your shoulder and seeing what you were typing.

azhdar · « **Reply #457 on:** Wed, 10 February 2016, 11:52:50 »

Quote from: Steezus on Wed, 10 February 2016, 11:35:11

Quote from: DanielT on Wed, 10 February 2016, 06:13:35
I made her happy because she is the best wife a man can wish for

She was definitely looking over your shoulder and seeing what you were typing.

Daniel blink twice if you're held hostage

Bromono · « **Reply #458 on:** Wed, 10 February 2016, 11:58:48 »

Quote from: azhdar on Wed, 10 February 2016, 11:52:50

Quote from: Steezus on Wed, 10 February 2016, 11:35:11
Quote from: DanielT on Wed, 10 February 2016, 06:13:35
I made her happy because she is the best wife a man can wish for

She was definitely looking over your shoulder and seeing what you were typing.

Daniel blink twice if you're held hostage

DanielT · « **Reply #459 on:** Wed, 10 February 2016, 12:21:14 »

Quote from: azhdar on Wed, 10 February 2016, 11:52:50

Quote from: Steezus on Wed, 10 February 2016, 11:35:11
Quote from: DanielT on Wed, 10 February 2016, 06:13:35
I made her happy because she is the best wife a man can wish for

She was definitely looking over your shoulder and seeing what you were typing.

Daniel blink twice if you're held hostage

)

ImpendingxDoom · « **Reply #460 on:** Fri, 19 February 2016, 13:26:16 »

alienman82 · « **Reply #461 on:** Fri, 19 February 2016, 13:26:57 »

removed.

HoffmanMyster · « **Reply #462 on:** Fri, 19 February 2016, 13:42:40 »

Quote from: ImpendingxDoom on Fri, 19 February 2016, 13:26:16

Show Image

Show Image

I see you are fully embracing the 1800.

Nicely done.

madhias · « **Reply #463 on:** Mon, 29 February 2016, 11:55:54 »

I am ready to join soon this gentlemen club of 1800 owners, but have to attach an USB cable to the keyboard - and need an hole in the case therefor. Or should I go with PS/2 and an original untouched cable?

alienman82 · « **Reply #464 on:** Mon, 29 February 2016, 12:12:08 »

removed.

madhias · « **Reply #465 on:** Mon, 29 February 2016, 14:12:25 »

Quote from: alienman82 on Mon, 29 February 2016, 12:12:08

Quote from: madhias on Mon, 29 February 2016, 11:55:54
I am ready to join soon this gentlemen club of 1800 owners, but have to attach an USB cable to the keyboard - and need an hole in the case therefor. Or should I go with PS/2 and an original untouched cable?

If you use the Dolch case, you can use USB without visible holes

Unfortunately with this G81-1800 case there is not much place

azhdar · « **Reply #466 on:** Mon, 29 February 2016, 14:13:31 »

Quote from: madhias on Mon, 29 February 2016, 14:12:25

Quote from: alienman82 on Mon, 29 February 2016, 12:12:08
Quote from: madhias on Mon, 29 February 2016, 11:55:54
I am ready to join soon this gentlemen club of 1800 owners, but have to attach an USB cable to the keyboard - and need an hole in the case therefor. Or should I go with PS/2 and an original untouched cable?

If you use the Dolch case, you can use USB without visible holes

Unfortunately with this G81-1800 case there is not much place

Show Image

Does that mean you figured what was up with your pcb ?

madhias · « **Reply #467 on:** Mon, 29 February 2016, 14:15:36 »

Quote from: azhdar on Mon, 29 February 2016, 14:13:31

Quote from: madhias on Mon, 29 February 2016, 14:12:25
Quote from: alienman82 on Mon, 29 February 2016, 12:12:08
Quote from: madhias on Mon, 29 February 2016, 11:55:54
I am ready to join soon this gentlemen club of 1800 owners, but have to attach an USB cable to the keyboard - and need an hole in the case therefor. Or should I go with PS/2 and an original untouched cable?

If you use the Dolch case, you can use USB without visible holes

Unfortunately with this G81-1800 case there is not much place

Show Image

Does that mean you figured what was up with your pcb ?

Yes, but a workaround, thanks to an idea from suicidal_orange I soldered a bridge to the next empty ENTER place on the PCB:

madhias · « **Reply #468 on:** Thu, 03 March 2016, 05:29:00 »

Here is my entry for this noble 1800 owners club. It is a new G81 case, with a Leeku MX 1800 PCB (v3), unlubed and unstickered MX Reds (but with 55g SPRiT springs), and a mixture of ANSI and ISO German caps. Unfortunately the ANSI set I bought a while ago from Taobao were in a weird profile, and so I mixed the sets. Also i have to re-solder the right ALT switch, it is askew!

appleonama · « **Reply #469 on:** Thu, 03 March 2016, 05:30:40 »

Quote from: madhias on Thu, 03 March 2016, 05:29:00

Here is my entry for this noble 1800 owners club. It is a new G81 case, with a Leeku MX 1800 PCB (v3), unlubed and unstickered MX Reds (but with 55g SPRiT springs), and a mixture of ANSI and ISO German caps. Unfortunately the ANSI set I bought a while ago from Taobao were in a weird profile, and so I mixed the sets. Also i have to re-solder the right ALT switch, it is askew!

Show Image

Show Image

Show Image

dam that is smoking hot great pics

azhdar · « **Reply #470 on:** Thu, 03 March 2016, 05:32:31 »

Quote from: madhias on Thu, 03 March 2016, 05:29:00

Here is my entry for this noble 1800 owners club. It is a new G81 case, with a Leeku MX 1800 PCB (v3), unlubed and unstickered MX Reds (but with 55g SPRiT springs), and a mixture of ANSI and ISO German caps. Unfortunately the ANSI set I bought a while ago from Taobao were in a weird profile, and so I mixed the sets. Also i have to re-solder the right ALT switch, it is askew!

Show Image

Show Image

Show Image

I really like this red led.

Would you have a picture of how the usb cable is plugged into the case?

madhias · « **Reply #471 on:** Thu, 03 March 2016, 05:40:16 »

Quote from: azhdar on Thu, 03 March 2016, 05:32:31

Quote from: madhias on Thu, 03 March 2016, 05:29:00
Here is my entry for this noble 1800 owners club. It is a new G81 case, with a Leeku MX 1800 PCB (v3), unlubed and unstickered MX Reds (but with 55g SPRiT springs), and a mixture of ANSI and ISO German caps. Unfortunately the ANSI set I bought a while ago from Taobao were in a weird profile, and so I mixed the sets. Also i have to re-solder the right ALT switch, it is askew!

Show Image

Show Image

Show Image

I really like this red led.

Would you have a picture of how the usb cable is plugged into the case?

I will make one later, basically I just had to make a cutout for the USB plug. A sharp knive is enough for cutting the case.

Regarding the LED I used one I got from SPRiT (I think he added a RGB set to every order I made), and it glows red now.

appleonama · « **Reply #472 on:** Thu, 03 March 2016, 05:44:21 »

Quote from: madhias on Thu, 03 March 2016, 05:40:16

Quote from: azhdar on Thu, 03 March 2016, 05:32:31
Quote from: madhias on Thu, 03 March 2016, 05:29:00
Here is my entry for this noble 1800 owners club. It is a new G81 case, with a Leeku MX 1800 PCB (v3), unlubed and unstickered MX Reds (but with 55g SPRiT springs), and a mixture of ANSI and ISO German caps. Unfortunately the ANSI set I bought a while ago from Taobao were in a weird profile, and so I mixed the sets. Also i have to re-solder the right ALT switch, it is askew!

Show Image

Show Image

Show Image

I really like this red led.

Would you have a picture of how the usb cable is plugged into the case?

I will make one later, basically I just had to make a cutout for the USB plug. A sharp knive is enough for cutting the case.

Regarding the LED I used one I got from SPRiT (I think he added a RGB set to every order I made), and it glows red now.

where do you guys come across one of these boards? I am highly interested in obtaining one

Khers · « **Reply #473 on:** Thu, 03 March 2016, 05:55:43 »

Prelim · « **Reply #474 on:** Thu, 03 March 2016, 06:29:21 »

Quote from: madhias on Thu, 03 March 2016, 05:29:00

Show Image

Show Image

Show Image

gorgeous pics, as always :eek:

you needed to cut the case frame, right?

meow a cat · « **Reply #475 on:** Thu, 03 March 2016, 06:48:26 »

Quote from: madhias on Thu, 03 March 2016, 05:29:00

Here is my entry for this noble 1800 owners club. It is a new G81 case, with a Leeku MX 1800 PCB (v3), unlubed and unstickered MX Reds (but with 55g SPRiT springs), and a mixture of ANSI and ISO German caps. Unfortunately the ANSI set I bought a while ago from Taobao were in a weird profile, and so I mixed the sets. Also i have to re-solder the right ALT switch, it is askew!

Show Image

Show Image

Show Image

Beautiful Madhias, that looks amazing. Soo classy! ;D

I'm planning out a Leeku 1800 build right now, and I was wondering if anyone here could tell me if the original PS/2 cables work alright via USB with a converter? I prefer the look of the OG coiled PS/2 cables, but I'd still like some USB action. :))

Khers · « **Reply #476 on:** Thu, 03 March 2016, 06:54:16 »

meow a cat · « **Reply #477 on:** Thu, 03 March 2016, 06:56:55 »

Quote from: Khers on Thu, 03 March 2016, 06:54:16

Quote from: meow a cat on Thu, 03 March 2016, 06:48:26
I'm planning out a Leeku 1800 build right now, and I was wondering if anyone here could tell me if the original PS/2 cables work alright via USB with a converter? I prefer the look of the OG coiled PS/2 cables, but I'd still like some USB action. )
Now, that would be something! I would also like to know this. Double win if that is the case, no need to cut the case _and_ original coiled cable... Yummy!

Yeah, those were my thoughts too. I don't really want to cut the case, so I'll deal with PS/2 if I have to. The cable is sexy enough to make up for it. PS/2 is inconvenient for board swapping though..

henz · « **Reply #478 on:** Thu, 03 March 2016, 07:03:16 »

mine is in the mail. cant wait to get it.

madhias · « **Reply #479 on:** Thu, 03 March 2016, 08:32:55 »

Quote from: meow a cat on Thu, 03 March 2016, 06:56:55

Quote from: Khers on Thu, 03 March 2016, 06:54:16
Quote from: meow a cat on Thu, 03 March 2016, 06:48:26
I'm planning out a Leeku 1800 build right now, and I was wondering if anyone here could tell me if the original PS/2 cables work alright via USB with a converter? I prefer the look of the OG coiled PS/2 cables, but I'd still like some USB action. )
Now, that would be something! I would also like to know this. Double win if that is the case, no need to cut the case _and_ original coiled cable... Yummy!

Yeah, those were my thoughts too. I don't really want to cut the case, so I'll deal with PS/2 if I have to. The cable is sexy enough to make up for it. PS/2 is inconvenient for board swapping though..

I also thought of using PS/2, but as you said board swapping and using it all the time somewhere else makes it so much easier to have USB directly available! I would say with a correct adapter it will work to use the PS/2 mode and cable. I have still the original cable, with original packaging and all, so maybe one time I will change it.

Quote from: Prelim on Thu, 03 March 2016, 06:29:21

Quote from: madhias on Thu, 03 March 2016, 05:29:00
Show Image

Show Image

Show Image

gorgeous pics, as always :eek:

you needed to cut the case frame, right?

Yes, I had to cut the case, but a sharp knive was enough to do this. It is not that exact, I like it, it could be better though, but it is on the back of the case... I will post a picture later. Now my wife has taken the camera! Arrgh.

jerue · « **Reply #480 on:** Thu, 03 March 2016, 09:10:22 »

Quote from: madhias on Thu, 03 March 2016, 05:29:00

Here is my entry for this noble 1800 owners club. It is a new G81 case, with a Leeku MX 1800 PCB (v3), unlubed and unstickered MX Reds (but with 55g SPRiT springs), and a mixture of ANSI and ISO German caps. Unfortunately the ANSI set I bought a while ago from Taobao were in a weird profile, and so I mixed the sets. Also i have to re-solder the right ALT switch, it is askew!

Show Image

Show Image

Show Image

1800 + CMYW = <3

looks great as always. I like the mix of caps!

madhias · « **Reply #481 on:** Thu, 03 March 2016, 09:13:51 »

Quote from: jerue on Thu, 03 March 2016, 09:10:22

1800 + CMYW = <3

looks great as always. I like the mix of caps!

I'd like to have CMYK though

I hope there will be a group buy soon.

madhias · « **Reply #482 on:** Thu, 03 March 2016, 13:33:06 »

Quote from: azhdar on Thu, 03 March 2016, 05:32:31

I really like this red led.

Would you have a picture of how the usb cable is plugged into the case?

Here is the picture:

Also I know now that the LED should be automatically change its color! So I may have to swap the resistors that this feature does work.

joey · « **Reply #483 on:** Thu, 03 March 2016, 13:34:09 »

That doesn't look too bad madhias, you could just get some sandpaper and smooth it out!

alienman82 · « **Reply #484 on:** Thu, 03 March 2016, 13:34:23 »

removed.

yomammary · « **Reply #485 on:** Tue, 08 March 2016, 07:58:11 »

Leeku PCB with OG Cherry keycaps and GMK RGB modifiers.

madhias · « **Reply #486 on:** Fri, 11 March 2016, 00:57:23 »

Nice, even with RGB leds!

yomammary · « **Reply #487 on:** Fri, 11 March 2016, 07:40:34 »

Quote from: madhias on Fri, 11 March 2016, 00:57:23

Nice, even with RGB leds!

Thanks

rowdy · « **Reply #488 on:** Sun, 13 March 2016, 23:08:50 »

Quote from: yomammary on Tue, 08 March 2016, 07:58:11

Show Image

Show Image

Show Image

Leeku PCB with OG Cherry keycaps and GMK RGB modifiers.

Nice touch with the LEDs :)

slickmamba · « **Reply #489 on:** Sun, 13 March 2016, 23:15:58 »

Quote from: yomammary on Fri, 11 March 2016, 07:40:34

Quote from: madhias on Fri, 11 March 2016, 00:57:23
Nice, even with RGB leds!
Thanks

Whoops, didn't put it in RGB order, sorry haha. Also, cap incoming

Quote from: rowdy on Sun, 13 March 2016, 23:08:50

Quote from: yomammary on Tue, 08 March 2016, 07:58:11
Show Image

Show Image

Show Image

Leeku PCB with OG Cherry keycaps and GMK RGB modifiers.

Nice touch with the LEDs :)

Thanks! :p

demik · « **Reply #490 on:** Sun, 13 March 2016, 23:17:19 »

why didn't you go red green blue on the LEDs o.o

1800 has always had a special place in my heart tho.

slickmamba · « **Reply #491 on:** Sun, 13 March 2016, 23:18:03 »

Quote from: demik on Sun, 13 March 2016, 23:17:19

why didn't you go red green blue on the LEDs o.o

1800 has always had a special place in my heart tho.

I SIP socketed them for him and just threw them on in random order

demik · « **Reply #492 on:** Sun, 13 March 2016, 23:21:11 »

ah, so it can be easily fixed.

you did a great job

appleonama · « **Reply #493 on:** Sun, 13 March 2016, 23:32:01 »

how do you find the production date on the 1800 label?

slickmamba · « **Reply #494 on:** Sun, 13 March 2016, 23:36:21 »

Quote from: appleonama on Sun, 13 March 2016, 23:32:01

how do you find the production date on the 1800 label?

check inside on the controller. I think

appleonama · « **Reply #495 on:** Sun, 13 March 2016, 23:38:02 »

Quote from: slickmamba on Sun, 13 March 2016, 23:36:21

Quote from: appleonama on Sun, 13 March 2016, 23:32:01
how do you find the production date on the 1800 label?

check inside on the controller

aw lame I am only looking at pictures. I just found an 1800HEU which has clears and I wanted to know its production date.

kokokoy · « **Reply #496 on:** Mon, 14 March 2016, 01:12:21 »

I'm following this -> https://deskthority.net/wiki/Cherry_date_codes

appleonama · « **Reply #497 on:** Mon, 14 March 2016, 01:46:48 »

Quote from: kokokoy on Mon, 14 March 2016, 01:12:21

I'm following this -> https://deskthority.net/wiki/Cherry_date_codes

oh nice I think I found a 1800 from 1995 with clears

yomammary · « **Reply #498 on:** Mon, 14 March 2016, 07:20:41 »

Quote from: demik on Sun, 13 March 2016, 23:17:19

why didn't you go red green blue on the LEDs o.o

1800 has always had a special place in my heart tho.

I'll change them

Happy?

Thanks to slickmamba for doing all the hard work

First real soldering job for me.

Jokrik · « **Reply #499 on:** Mon, 14 March 2016, 07:38:11 »

Quote from: yomammary on Mon, 14 March 2016, 07:20:41

Quote from: demik on Sun, 13 March 2016, 23:17:19
why didn't you go red green blue on the LEDs o.o

1800 has always had a special place in my heart tho.
I'll change them

Show Image

Happy?

Thanks to slickmamba for doing all the hard work :)
First real soldering job for me.

That's a very interesting mod layout :) in a good way

News:

Author Topic: Post your G80-1800 pictures (Read 530473 times)