Author Topic: PBT 104/105 set ROUND 3 (COMPLETED) (Read 471007 times)

ynrozturk · « **Reply #950 on:** Fri, 21 March 2014, 19:53:11 »

I will have to opt out of this. Apologies to everyone - I really wanted that set, too. I need it. However medical concerns and bills are more important.

Sorry guys.

Keytrun · « **Reply #951 on:** Fri, 21 March 2014, 20:16:47 »

You got my payment a while ago, right Ivan? Just want to make sure.

How many more people need to pay before this thing can go to production?

IvanIvanovich · « **Reply #952 on:** Sat, 22 March 2014, 12:49:17 »

I'll need to take some time to get everything checked on paid orders and take away those that have cancelled to get a proper total... but at a quick glance I guess orders will need to reopen for a little bit as we are at least 40 sets short now. I have a vendor that has expressed some interest in possibly taking care of half that so fingers crossed we can get back to MOQ again fairly quick as not to cause a long delay for those that paid promptly.

Vibex · « **Reply #953 on:** Sat, 22 March 2014, 13:19:59 »

Quote from: IvanIvanovich on Sat, 22 March 2014, 12:49:17

I'll need to take some time to get everything checked on paid orders and take away those that have cancelled to get a proper total... but at a quick glance I guess orders will need to reopen for a little bit as we are at least 40 sets short now. I have a vendor that has expressed some interest in possibly taking care of half that so fingers crossed we can get back to MOQ again fairly quick as not to cause a long delay for those that paid promptly.

Sorry it had to come to this. Like I said before, I might be able to grab a second when my next pay check comes.

whiteduck · « **Reply #954 on:** Sat, 22 March 2014, 15:30:32 »

paid, sorry late >_<

fknraiden · « **Reply #955 on:** Sun, 23 March 2014, 15:44:28 »

Hey. If anyone is ordering for alphas. I'd be interested in covering some of the cost for the modifiers. If you are interested just shoot me a Msg.

FreeCopy · « **Reply #956 on:** Sun, 23 March 2014, 17:09:36 »

Quote from: IvanIvanovich on Sat, 22 March 2014, 12:49:17

I'll need to take some time to get everything checked on paid orders and take away those that have cancelled to get a proper total... but at a quick glance I guess orders will need to reopen for a little bit as we are at least 40 sets short now. I have a vendor that has expressed some interest in possibly taking care of half that so fingers crossed we can get back to MOQ again fairly quick as not to cause a long delay for those that paid promptly.

If available I can pick up a set of cherry black on black dyesub and can pay immediately.

IvanIvanovich · « **Reply #957 on:** Mon, 24 March 2014, 12:00:08 »

For those interested in picking up full sets please PM to me with the following:
email address, real name and physical mailing address (if you are outside the US a telephone number for the customs form) and what you would like.
example:
ivanivanovich@mail.su

Ivan Ivanovich
Kremlin
Moscow, Russia, 103073
+7 495 695-37-76

1 blank set
Thanks.

Latin00032 · « **Reply #958 on:** Mon, 24 March 2014, 12:08:23 »

Quote from: IvanIvanovich on Mon, 24 March 2014, 12:00:08

For those interested in picking up full sets please PM to me with the following:
email address, real name and physical mailing address (if you are outside the US a telephone number for the customs form) and what you would like.
example:
ivanivanovich@mail.su

Ivan Ivanovich
Kremlin
Moscow, Russia, 103073
+7 495 695-37-76

1 blank set
Thanks.

Is this for people who haven't already ordered?

I already paid my invoice. Do I need to send information again?

IvanIvanovich · « **Reply #959 on:** Mon, 24 March 2014, 12:09:41 »

Only applies to new orders to pick up unpaid/cancelled orders so we can return to MOQ.
If you have already paid your order and do not want anything additional you do not need to do anything further.

pr0ximity · « **Reply #960 on:** Mon, 24 March 2014, 12:12:23 »

Quote from: IvanIvanovich on Mon, 24 March 2014, 12:09:41

Only applies to new orders to pick up unpaid/cancelled orders so we can return to MOQ.
If you have already paid your order and do not want anything additional you do not need to do anything further.

Do you have an estimate of how far off we are? I'll probably pick up a couple sets of blanks.

FreeCopy · « **Reply #961 on:** Mon, 24 March 2014, 13:40:42 »

Quote from: IvanIvanovich on Mon, 24 March 2014, 12:00:08

For those interested in picking up full sets please PM to me with the following:
email address, real name and physical mailing address (if you are outside the US a telephone number for the customs form) and what you would like.
example:
ivanivanovich@mail.su

Ivan Ivanovich
Kremlin
Moscow, Russia, 103073
+7 495 695-37-76

1 blank set
Thanks.

That was fast. PMed, invoiced, paid.

Thanks, Ivan!

lolkey · « **Reply #962 on:** Tue, 25 March 2014, 05:15:34 »

Anyone order a blank set? How much did it come to shipped to the US?

geniekid · « **Reply #963 on:** Tue, 25 March 2014, 09:19:46 »

Quote from: lolkey on Tue, 25 March 2014, 05:15:34

Anyone order a blank set? How much did it come to shipped to the US?

I was invoiced a total of $64.48 for shipping to Chicago. 55 (blanks) + 3 (GB fee) + 4 (S&H) + 2.48 (PayPal fee)

IvanIvanovich · « **Reply #964 on:** Tue, 25 March 2014, 10:26:03 »

Thanks to those of you that have picked up some of the cancelled orders. We are still about 30 sets short.

GSimon · « **Reply #965 on:** Tue, 25 March 2014, 13:05:18 »

Invoice received and paid!

Kind of wish I added the ergodox layout, if you want to re-invoice me with that one included I'll pay for it also.

geniekid · « **Reply #966 on:** Tue, 25 March 2014, 13:11:04 »

Quote from: GSimon on Tue, 25 March 2014, 13:05:18

Invoice received and paid!

Kind of wish I added the ergodox layout, if you want to re-invoice me with that one included I'll pay for it also.

I do not believe the ergodox is available as it did not meet the MOQ.

1cubesolver · « **Reply #967 on:** Tue, 25 March 2014, 13:11:51 »

Invoice received and paid. Glad I was able to get in on this. Thanks Ivan!

n7 · « **Reply #968 on:** Tue, 25 March 2014, 14:13:07 »

Paid for my 2nd invoice. Thanks!

GSimon · « **Reply #969 on:** Tue, 25 March 2014, 17:11:54 »

Quote from: geniekid on Tue, 25 March 2014, 13:11:04

Quote from: GSimon on Tue, 25 March 2014, 13:05:18
Invoice received and paid!

Kind of wish I added the ergodox layout, if you want to re-invoice me with that one included I'll pay for it also.

I do not believe the ergodox is available as it did not meet the MOQ.

Oh ok, probably for the best as I seem to be on an spending spree.

wthefourth · « **Reply #970 on:** Tue, 25 March 2014, 18:33:11 »

Paid invoice this morning! Can't wait to see those glorious black on black dyesubs.

chromeeye · « **Reply #971 on:** Tue, 25 March 2014, 18:35:58 »

Paid for additional invoice. Thanks Ivan!

Kfactork · « **Reply #972 on:** Tue, 25 March 2014, 21:19:19 »

Quote from: lolkey on Tue, 25 March 2014, 05:15:34

Anyone order a blank set? How much did it come to shipped to the US?

My shipping was only $5. $3 GB and 4% fee ppf though, so around $10 in fess if you are going for one set.

HPE1000 · « **Reply #973 on:** Wed, 26 March 2014, 14:40:20 »

Which sets need picked up to hit MOQ? Are they the blank or the dyesub ones?

I might be interested

IvanIvanovich · « **Reply #974 on:** Wed, 26 March 2014, 14:42:14 »

Any style. MOQ is for total sets so it doesn't matter which ones at all as long as it's 300 all together.

HPE1000 · « **Reply #975 on:** Wed, 26 March 2014, 14:44:03 »

Quote from: IvanIvanovich on Wed, 26 March 2014, 14:42:14

Any style. MOQ is for total sets so it doesn't matter which ones at all as long as it's 300 all together.

Okay, let me think about this, I might be down for blank

Jakreem · « **Reply #976 on:** Wed, 26 March 2014, 16:09:17 »

Paid.

Thanks for setting this up Ivan!

HPE1000 · « **Reply #977 on:** Wed, 26 March 2014, 16:21:17 »

PM sent

neunelfer · « **Reply #978 on:** Wed, 26 March 2014, 17:06:47 »

What is the current number of remaining sets to reach MOQ?

RiGS · « **Reply #979 on:** Wed, 26 March 2014, 17:49:37 »

I wish there was an option to buy a blank set and side print it in Russian.

Oobly · « **Reply #980 on:** Thu, 27 March 2014, 02:36:13 »

Quote from: RiGS on Wed, 26 March 2014, 17:49:37

I wish there was an option to buy a blank set and side print it in Russian.

From the OP: "For those interested in resell, if you order 20+ PBT set I will do set up for any other layout in any font you wish. In addition for 20+ set volume order the groupbuy fee is waived and you will get free uninsured shipping."

So you just have to order 20 or more sets (perhaps you can organise a mini GroupBuy for it?) and you can get it (assuming IMSTO can do the side printing)

I check this thread every day to see how it's progressing. I REALLY want these sets.

spearman · « **Reply #981 on:** Thu, 27 March 2014, 03:46:51 »

Me too.

A question about profiles: what is 'Cherry Profile' compatible with besides Cherry boards? For instance, I have a G80 that I plan to put these on; but would they also mount on a standard profile board with cherry stem, albeit at a lower profile? Or are they pretty much only usable on Cherry boards (eg G80, G81...)?

tbc · « **Reply #982 on:** Thu, 27 March 2014, 04:09:31 »

profile doesn't really affect compatibility with boards. just the width of keys and stem placement on keys like capslock.

IvanIvanovich · « **Reply #983 on:** Thu, 27 March 2014, 06:37:10 »

Cherry profile means it's identical to those stock keys on Cherry G80/G81 having the exact same height and key shapes. Set is perfectly compatible with all other 104/87/61 MX keyboard like Filco, CM, Ducky, etc.

sean4star · « **Reply #984 on:** Fri, 28 March 2014, 13:58:38 »

How short are we from MOQ? Last I saw it sounded like a fair number had dropped out. Does it look like there is a chance of getting back up to MOQ anytime in the near future?

Yslen · « **Reply #985 on:** Fri, 28 March 2014, 14:33:46 »

Order placed, invoice received and paid

IvanIvanovich · « **Reply #986 on:** Fri, 28 March 2014, 16:05:01 »

We are currently 24 sets short to MOQ. Hopefully it won't take too much longer to get back.

sean4star · « **Reply #987 on:** Fri, 28 March 2014, 16:53:10 »

Ah, good. We're close than I thought. Hopefully not too much longer...

minho · « **Reply #988 on:** Fri, 28 March 2014, 18:15:41 »

Ordered through the form that was linked on r/mechanicalkeyboards. Stated that order was for blank set underneath my addressed, and PM'ed you too to clarify order (didn't think to post in this thread until now, doh). Thanks

Mooby · « **Reply #989 on:** Sat, 29 March 2014, 06:39:11 »

Quote from: IvanIvanovich on Fri, 28 March 2014, 16:05:01

We are currently 24 sets short to MOQ. Hopefully it won't take too much longer to get back.

Is this only for the GMK addons or would it still be posible to order a black on black PBT set?

lakiozoon · « **Reply #990 on:** Sat, 29 March 2014, 07:56:47 »

Quote from: Mooby on Sat, 29 March 2014, 06:39:11

Quote from: IvanIvanovich on Fri, 28 March 2014, 16:05:01
We are currently 24 sets short to MOQ. Hopefully it won't take too much longer to get back.

Is this only for the GMK addons or would it still be posible to order a black on black PBT set?

It is possible to order black on black, PM Ivan and he'll send you an invoice.

Mooby · « **Reply #991 on:** Sat, 29 March 2014, 11:58:29 »

Quote from: lakiozoon on Sat, 29 March 2014, 07:56:47

Quote from: Mooby on Sat, 29 March 2014, 06:39:11
Quote from: IvanIvanovich on Fri, 28 March 2014, 16:05:01
We are currently 24 sets short to MOQ. Hopefully it won't take too much longer to get back.

Is this only for the GMK addons or would it still be posible to order a black on black PBT set?

It is possible to order black on black, PM Ivan and he'll send you an invoice.

It was no problem to place an order. I was just irritated by the "orders closed" message in the op.

IvanIvanovich · « **Reply #992 on:** Sat, 29 March 2014, 12:12:25 »

That's weird... I did have a whole thing in the OP about the current status that I updated a few days ago. I wonder what happened to it?

minho · « **Reply #993 on:** Sat, 29 March 2014, 16:50:06 »

Ivan, can you cancel my invoice and reinvoice me? I sent you a PM yesterday about it with my paypal email.

Psybin · « **Reply #994 on:** Sat, 29 March 2014, 17:06:36 »

Sorry if this has been covered somewhere, but once the number is reached, how long does it take to make them, then ship them out?
This set is going on the CODE I ordered yesterday, will be so awesome.

IvanIvanovich · « **Reply #995 on:** Sat, 29 March 2014, 17:18:12 »

Production time will probably be a couple months, but I won't know for certain until it's paid and they can tell me how the order will fit in their production schedule.

Sevas · « **Reply #996 on:** Sun, 30 March 2014, 13:46:32 »

Invoice received and paid! Thank you Ivan!

echo0 · « **Reply #997 on:** Sun, 30 March 2014, 14:18:11 »

Invoice received and paid. Thanks!

HPE1000 · « **Reply #998 on:** Sun, 30 March 2014, 14:28:09 »

I'm still not sure my choice of blanks was the best idea, I need to decide...

Either way these things are going to be awesome but I just don't know what I want $:-\$

lakiozoon · « **Reply #999 on:** Sun, 30 March 2014, 16:08:59 »

Quote from: HPE1000 on Sun, 30 March 2014, 14:28:09

I'm still not sure my choice of blanks was the best idea, I need to decide...

Either way these things are going to be awesome but I just don't know what I want $:-\$

Get both:)

I've been thinking of setting blanks to modifier keys and regular ones on letters/numbers.
Still thinking....

News:

Author Topic: PBT 104/105 set ROUND 3 (COMPLETED) (Read 471007 times)