« previous next »
Pages: « 1 ... 16 17 18 19 20 [21] 22 23 24 25 26 »   Go Down

Author Topic: [GB] KIRA80 & KIRA S  (Read 295004 times)

0 Members and 1 Guest are viewing this topic.

Offline Choppersuey

  • Posts: 42
  • Location: Germany
Re: [GB] KIRA80 & KIRA S
« Reply #1000 on: Fri, 12 April 2019, 22:16:31 »
Quote from: Jkush463 on Fri, 12 April 2019, 21:00:00
i started realizing the manufacturers lack in the threading department i chase all the threads in every case i buy with a tap and clean them up then dab some oil inhtem to make life easier and ensure i dont get stripped holes.

What tap size and what kind of screws did you use?
Logged

Offline aszyd

  • Posts: 11
Re: [GB] KIRA80 & KIRA S
« Reply #1001 on: Fri, 12 April 2019, 23:08:00 »
The only area that I have had a problem with so far is the alu back plate. I can get the screws in and out, but there is a section in the middle of the threading that is tough to get past.

Whatever happened with the Kira S 10 key? I realized I might want one after all.
Logged

Offline thesiscamper

  • * Maker
  • Posts: 975
    • Keyrenders
Re: [GB] KIRA80 & KIRA S
« Reply #1002 on: Fri, 12 April 2019, 23:39:59 »
Screws should all be M3, that's what I used for my prototype and I don't think EVE changed them. No word from zF yet, I don't have any updates.
Logged


"haters are confused admirers"

Offline Jkush463

  • Posts: 368
  • Location: Aurora, IL
Re: [GB] KIRA80 & KIRA S
« Reply #1003 on: Fri, 12 April 2019, 23:55:23 »
yeah, all M3 and i use stainless hardware from an RC company i deal with, they use the same hardware and sell them with different heads and lengths.
Logged

Offline Choppersuey

  • Posts: 42
  • Location: Germany
Re: [GB] KIRA80 & KIRA S
« Reply #1004 on: Sat, 13 April 2019, 00:07:58 »
Thanks, thesis and jkush!
Logged

Offline takai

  • Posts: 11
Re: [GB] KIRA80 & KIRA S
« Reply #1005 on: Sat, 13 April 2019, 05:18:43 »
Received a second shipping invoice  :rolleyes: :rolleyes: :rolleyes:

Solved
« Last Edit: Sat, 13 April 2019, 05:48:41 by takai »
Logged

Offline Hamel

  • Posts: 118
  • Location: Seoul, South Korea
  • KBDLAB
Re: [GB] KIRA80 & KIRA S
« Reply #1006 on: Tue, 16 April 2019, 07:19:46 »
Has anyone who joined the priority buy received an shipping invoice yet?
Logged




Offline Create_alt_delete

  • Posts: 85
  • Location: Georgia, USA
Re: [GB] KIRA80 & KIRA S
« Reply #1007 on: Tue, 16 April 2019, 07:58:43 »
Quote from: Hamel on Tue, 16 April 2019, 07:19:46
Has anyone who joined the priority buy received an shipping invoice yet?
Priority buy participant here. No invoice yet.

Sent from my SM-G955U using Tapatalk

Logged

Offline Bubblegum

  • Posts: 177
Re: [GB] KIRA80 & KIRA S
« Reply #1008 on: Tue, 16 April 2019, 08:35:40 »
Quote from: Create_alt_delete on Tue, 16 April 2019, 07:58:43
Quote from: Hamel on Tue, 16 April 2019, 07:19:46
Has anyone who joined the priority buy received an shipping invoice yet?
Priority buy participant here. No invoice yet.

Same here, no invoice nor mail reply. Not sure what the point of the priority buy was if everyone else are getting their boards ahead of time. Don't think they would need 2-4 extra weeks just to engrave the numbers. I'm sure we will all get it eventually, but it's frustrating.
Logged

Offline jumpmineralwater

  • Posts: 50
    • jumpmineralwater IG
Re: [GB] KIRA80 & KIRA S
« Reply #1009 on: Tue, 16 April 2019, 09:10:44 »
Joined for a priority board and still waiting for a shipping invoice.
Logged

Offline sroop

  • Posts: 91
Re: [GB] KIRA80 & KIRA S
« Reply #1010 on: Tue, 16 April 2019, 09:12:49 »
Same. Priority buy, Poseidon blue, brass and alu plates - no invoice or email communication.


Sent from my iPhone using Tapatalk
Logged

Offline Etherealsound

  • Posts: 453
  • Location: Madison, WI
Re: [GB] KIRA80 & KIRA S
« Reply #1011 on: Tue, 16 April 2019, 10:36:03 »
Priority buyer for moon grey. Received and paid invoice more than a week ago but no tracking or communication.
Logged

Offline Hamel

  • Posts: 118
  • Location: Seoul, South Korea
  • KBDLAB
Re: [GB] KIRA80 & KIRA S
« Reply #1012 on: Wed, 17 April 2019, 06:08:03 »
Quote from: Hamel on Tue, 16 April 2019, 07:19:46
Has anyone who joined the priority buy received an shipping invoice yet?
Update: Received a DHL tracking few hours ago, deep black, priority buy.

나의 SM-G950N 의 Tapatalk에서 보냄

Logged




Offline vafan

  • Posts: 55
Re: [GB] KIRA80 & KIRA S
« Reply #1013 on: Wed, 17 April 2019, 21:35:38 »
Paid the shipping invoice about 2 weeks ago and have no tracking info for now.

Update: Well, 5 hours after this post. I got a call from DHL. No tracking mail or anything. What a surprise!

And here you are

https://imgur.com/a/ImmDi6L
« Last Edit: Thu, 18 April 2019, 02:39:27 by vafan »
Logged

Offline Etherealsound

  • Posts: 453
  • Location: Madison, WI
Re: [GB] KIRA80 & KIRA S
« Reply #1014 on: Thu, 18 April 2019, 12:18:32 »
Quote from: vafan on Wed, 17 April 2019, 21:35:38
Paid the shipping invoice about 2 weeks ago and have no tracking info for now.

Update: Well, 5 hours after this post. I got a call from DHL. No tracking mail or anything. What a surprise!

And here you are

https://imgur.com/a/ImmDi6L

Wait what. Are you in the US by chance.
Logged

Offline Create_alt_delete

  • Posts: 85
  • Location: Georgia, USA
Re: [GB] KIRA80 & KIRA S
« Reply #1015 on: Thu, 18 April 2019, 13:01:39 »
Emailed back and forth with Alex yesterday. He said the rest of the shipping invoices would be going out "soon."

Sent from my SM-G955U using Tapatalk

Logged

Offline vafan

  • Posts: 55
Re: [GB] KIRA80 & KIRA S
« Reply #1016 on: Thu, 18 April 2019, 19:35:55 »
Quote from: Etherealsound on Thu, 18 April 2019, 12:18:32
Quote from: vafan on Wed, 17 April 2019, 21:35:38
Paid the shipping invoice about 2 weeks ago and have no tracking info for now.

Update: Well, 5 hours after this post. I got a call from DHL. No tracking mail or anything. What a surprise!

And here you are

https://imgur.com/a/ImmDi6L

Wait what. Are you in the US by chance.

I am not, sorry. Asia here
Logged

Offline forevermadrigal

  • Posts: 663
  • Location: In between myself
Re: [GB] KIRA80 & KIRA S
« Reply #1017 on: Thu, 18 April 2019, 20:01:47 »
Quote from: vafan on Wed, 17 April 2019, 21:35:38
Paid the shipping invoice about 2 weeks ago and have no tracking info for now.

Update: Well, 5 hours after this post. I got a call from DHL. No tracking mail or anything. What a surprise!

And here you are

https://imgur.com/a/ImmDi6L

You can tell it's from asia cause it actually says kira on the plate smh
Logged

Offline vafan

  • Posts: 55
Re: [GB] KIRA80 & KIRA S
« Reply #1018 on: Fri, 19 April 2019, 02:13:33 »
Quote from: forevermadrigal on Thu, 18 April 2019, 20:01:47
Quote from: vafan on Wed, 17 April 2019, 21:35:38
Paid the shipping invoice about 2 weeks ago and have no tracking info for now.

Update: Well, 5 hours after this post. I got a call from DHL. No tracking mail or anything. What a surprise!

And here you are

https://imgur.com/a/ImmDi6L

You can tell it's from asia cause it actually says kira on the plate smh

I do not buy it through Asia channel, its International channel.

Btw, any suggestion for keycaps color? Thanks
Logged

Offline Choppersuey

  • Posts: 42
  • Location: Germany
Re: [GB] KIRA80 & KIRA S
« Reply #1019 on: Fri, 19 April 2019, 02:57:22 »
Built mine two days ago with Tangerines:

« Last Edit: Fri, 19 April 2019, 07:21:46 by Choppersuey »
Logged

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 12279
  • Location: RSTLN E
  • "Do you shovel to survive, or survive to shovel?"
Re: [GB] KIRA80 & KIRA S
« Reply #1020 on: Fri, 19 April 2019, 03:14:49 »
Quote from: Choppersuey on Fri, 19 April 2019, 02:57:22
Built mine two days ago with Tangerines:
Show Image

Show Image


second pic is very good
Logged
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | ctrl.alt x GON 60% | TGR Alice | Mira SE #29 | Mira SE #34 | Revo One | z | Keycult No. 1 | First CW87 prototype | Mech27v1 | Camp C225 | Duck Orion V1 | LZ CLS sxh | Geon Frog TKL | Hiney TKL One | Geon Glare TKL



"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos, after I came back from a break | "Is Linkshine our Nixon?" -NAV | "Puddsy is the Puddsy of keebs" -ns90

Offline yap68

  • Posts: 124
Re: [GB] KIRA80 & KIRA S
« Reply #1021 on: Fri, 19 April 2019, 03:47:55 »
Quote from: vafan on Wed, 17 April 2019, 21:35:38
Paid the shipping invoice about 2 weeks ago and have no tracking info for now.

Update: Well, 5 hours after this post. I got a call from DHL. No tracking mail or anything. What a surprise!

And here you are

https://imgur.com/a/ImmDi6L

Does the Poseidon Blue look ok to you?
Logged

Offline forevermadrigal

  • Posts: 663
  • Location: In between myself
Re: [GB] KIRA80 & KIRA S
« Reply #1022 on: Fri, 19 April 2019, 09:44:58 »
Quote from: Choppersuey on Fri, 19 April 2019, 02:57:22
Built mine two days ago with Tangerines:
Show Image

Show Image


Moon grey is really clean :eek:
Logged

Offline spyruf

  • Posts: 109
  • Location: USA
Re: [GB] KIRA80 & KIRA S
« Reply #1023 on: Fri, 19 April 2019, 10:34:30 »
Quote from: Choppersuey on Fri, 19 April 2019, 02:57:22
Built mine two days ago with Tangerines:
Show Image

Show Image

Muted with 9009 accents ?
Logged

Offline okidna

  • Posts: 73
  • Location: Indonesia
Re: [GB] KIRA80 & KIRA S
« Reply #1024 on: Fri, 19 April 2019, 11:00:24 »
Quote from: spyruf on Fri, 19 April 2019, 10:34:30
Quote from: Choppersuey on Fri, 19 April 2019, 02:57:22
Built mine two days ago with Tangerines:
Show Image

Show Image

Muted with 9009 accents ?

I think that's EPBT 9009, judging by the stacked Prt Sc | Sys Rq & Pause | Break legend.
Logged

Offline Choppersuey

  • Posts: 42
  • Location: Germany
Re: [GB] KIRA80 & KIRA S
« Reply #1025 on: Fri, 19 April 2019, 11:09:28 »
Quote from: spyruf on Fri, 19 April 2019, 10:34:30
Muted with 9009 accents ?
just ePBT 9009
Logged

Offline Etherealsound

  • Posts: 453
  • Location: Madison, WI
Re: [GB] KIRA80 & KIRA S
« Reply #1026 on: Fri, 19 April 2019, 11:43:12 »
Quote from: Choppersuey on Fri, 19 April 2019, 02:57:22
Built mine two days ago with Tangerines:
Show Image

Show Image


That's clean af. Kinda sad to see that the "grey" really did turn out to be just silver though .
Logged

Offline iEatPuppers

  • Posts: 50
Re: [GB] KIRA80 & KIRA S
« Reply #1027 on: Sun, 21 April 2019, 02:43:04 »
Any advice on the screws? Joining the plate to the top seems super difficult without stripping the screw heads.
Logged

Offline Jkush463

  • Posts: 368
  • Location: Aurora, IL
Re: [GB] KIRA80 & KIRA S
« Reply #1028 on: Sun, 21 April 2019, 12:20:39 »
Just went to build one of my boards and realized the USB port on one of my PCB's is smashed and pretty much unfixable, anywhwere i can buy a new one and just de solder this one? or should i hit up ZF and just pray they feel like helping me.
Logged

Offline forevermadrigal

  • Posts: 663
  • Location: In between myself
Re: [GB] KIRA80 & KIRA S
« Reply #1029 on: Sun, 21 April 2019, 14:04:19 »
Quote from: Jkush463 on Sun, 21 April 2019, 12:20:39
Just went to build one of my boards and realized the USB port on one of my PCB's is smashed and pretty much unfixable, anywhwere i can buy a new one and just de solder this one? or should i hit up ZF and just pray they feel like helping me.

you can always buy hiney's pcb and just use that.
Logged

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 12279
  • Location: RSTLN E
  • "Do you shovel to survive, or survive to shovel?"
Re: [GB] KIRA80 & KIRA S
« Reply #1030 on: Sun, 21 April 2019, 14:28:03 »
Quote from: forevermadrigal on Sun, 21 April 2019, 14:04:19
Quote from: Jkush463 on Sun, 21 April 2019, 12:20:39
Just went to build one of my boards and realized the USB port on one of my PCB's is smashed and pretty much unfixable, anywhwere i can buy a new one and just de solder this one? or should i hit up ZF and just pray they feel like helping me.

you can always buy hiney's pcb and just use that.

i recommend this option

send him a pm he prolly has a few extra kicking around

EDIT: i took some liberty and just messaged him and he doesn't have any

but switchmod absolutely does have some
« Last Edit: Sun, 21 April 2019, 14:30:13 by Puddsy »
Logged
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | ctrl.alt x GON 60% | TGR Alice | Mira SE #29 | Mira SE #34 | Revo One | z | Keycult No. 1 | First CW87 prototype | Mech27v1 | Camp C225 | Duck Orion V1 | LZ CLS sxh | Geon Frog TKL | Hiney TKL One | Geon Glare TKL



"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos, after I came back from a break | "Is Linkshine our Nixon?" -NAV | "Puddsy is the Puddsy of keebs" -ns90

Offline Etherealsound

  • Posts: 453
  • Location: Madison, WI
Re: [GB] KIRA80 & KIRA S
« Reply #1031 on: Sun, 21 April 2019, 15:43:22 »
Quote from: Jkush463 on Sun, 21 April 2019, 12:20:39
Just went to build one of my boards and realized the USB port on one of my PCB's is smashed and pretty much unfixable, anywhwere i can buy a new one and just de solder this one? or should i hit up ZF and just pray they feel like helping me.

Regardless of how you go about it, I'd recommend contacting zfrontier about getting a replacement. It's not like the kit was cheap. It's pretty ridiculous to pay and get a broken pcb and just leave it at that. Definitely see about getting it replaced
Logged

Offline Jkush463

  • Posts: 368
  • Location: Aurora, IL
Re: [GB] KIRA80 & KIRA S
« Reply #1032 on: Sun, 21 April 2019, 17:34:43 »
Quote from: Etherealsound on Sun, 21 April 2019, 15:43:22
Quote from: Jkush463 on Sun, 21 April 2019, 12:20:39
Just went to build one of my boards and realized the USB port on one of my PCB's is smashed and pretty much unfixable, anywhwere i can buy a new one and just de solder this one? or should i hit up ZF and just pray they feel like helping me.

Regardless of how you go about it, I'd recommend contacting zfrontier about getting a replacement. It's not like the kit was cheap. It's pretty ridiculous to pay and get a broken pcb and just leave it at that. Definitely see about getting it replaced

yeah ill send ZF a message and see what can be done im not in a rush its my spare pcb for my brass plate but i do want it fixed so when i want to build that plate i can. i may order a few usb mini ports and try to fix it my self tho too. 
Logged

Offline kokugatsu

  • Posts: 148
  • Location: East of Eden
Re: [GB] KIRA80 & KIRA S
« Reply #1033 on: Mon, 22 April 2019, 00:13:57 »
Still no shipping invoice for "priority" Poseidon Blue, jesus
Logged

Offline schlep

  • Posts: 72
Re: [GB] KIRA80 & KIRA S
« Reply #1034 on: Mon, 22 April 2019, 08:44:53 »
Quote from: kokugatsu on Mon, 22 April 2019, 00:13:57
Still no shipping invoice for "priority" Poseidon Blue, jesus

Where are you located? I haven't received mine either and mine is the same colour as yours. Could it be due to the colour?

I emailed zFrontier abt 2 weeks ago and he said he will send me an invoice soon. That was on April 8th and until now I have not received any shipping invoice nor the board.

I am based in Singapore by the way.
Logged

Offline Brammm87

  • Posts: 561
  • Location: Belgium
Re: [GB] KIRA80 & KIRA S
« Reply #1035 on: Mon, 22 April 2019, 11:43:37 »
No shipping invoice for my poseidon blue either. Located in Belgium.
Logged
pls gief bbv2

Offline sroop

  • Posts: 91
Re: [GB] KIRA80 & KIRA S
« Reply #1036 on: Mon, 22 April 2019, 11:45:32 »
Same here except I haven't bothered to email because what's the point?


Sent from my iPhone using Tapatalk
Logged

Offline Jkush463

  • Posts: 368
  • Location: Aurora, IL
Re: [GB] KIRA80 & KIRA S
« Reply #1037 on: Mon, 22 April 2019, 20:26:22 »
wild, sent ZF a complaint on my kira pcb, alex responded in about 20 minutes and said hell have a replacement on the way this next Monday. didn't ask about my priority board i probably should have.
Logged

Offline vafan

  • Posts: 55
Re: [GB] KIRA80 & KIRA S
« Reply #1038 on: Mon, 22 April 2019, 20:57:22 »
Quote from: yap68 on Fri, 19 April 2019, 03:47:55
Quote from: vafan on Wed, 17 April 2019, 21:35:38
Paid the shipping invoice about 2 weeks ago and have no tracking info for now.

Update: Well, 5 hours after this post. I got a call from DHL. No tracking mail or anything. What a surprise!

And here you are

https://imgur.com/a/ImmDi6L

Does the Poseidon Blue look ok to you?

It's good, however for me this colour is quite hard to find the keyset.
Logged

Offline thesiscamper

  • * Maker
  • Posts: 975
    • Keyrenders
Re: [GB] KIRA80 & KIRA S
« Reply #1039 on: Mon, 22 April 2019, 20:57:50 »
Alex hasn’t responded to my messages, I can see they’re still shipping albeit slowly. I assume several people who have not received a shipping invoice was assigned a board with issues. There really is nothing for me to share, but I will keep trying to reach zF.
Logged


"haters are confused admirers"

Offline kokugatsu

  • Posts: 148
  • Location: East of Eden
Re: [GB] KIRA80 & KIRA S
« Reply #1040 on: Tue, 23 April 2019, 12:48:03 »
Quote from: schlep on Mon, 22 April 2019, 08:44:53
Quote from: kokugatsu on Mon, 22 April 2019, 00:13:57
Still no shipping invoice for "priority" Poseidon Blue, jesus

Where are you located? I haven't received mine either and mine is the same colour as yours. Could it be due to the colour?

I emailed zFrontier abt 2 weeks ago and he said he will send me an invoice soon. That was on April 8th and until now I have not received any shipping invoice nor the board.

I am based in Singapore by the way.

Also in SEA, and yeah I believe the delay is mainly because of our colour.

FYI I got an email from Alex, saying the invoice should be going out this week. Will let you know when I get mine  :)
Logged

Offline takai

  • Posts: 11
Re: [GB] KIRA80 & KIRA S
« Reply #1041 on: Tue, 23 April 2019, 18:10:24 »
I got my board last week and found some scratches on the plate.
zF quality control seems not good.

thesiscamper: do you have plan to share plate data?


Logged

Offline redbanshee

  • actually Dade Murphy
  • Posts: 487
  • Location: The Gibson
Re: [GB] KIRA80 & KIRA S
« Reply #1042 on: Wed, 24 April 2019, 10:06:53 »
I love how these guys (zfrontier) just think that we need to be attentive to their every whim, on their schedule, with no clue as to when things will happen.

Im heading out of the country (for an extended period of time) next week and now I have to bring my electronics to constantly check my email daily to pay this shipping invoice whenever they feel like sending it. So i can actually get my damn keyboard that I paid for.


Boycotting zfrontier, and smearing this joke-of-a-company every chance I get. Incompetence, 0 communication, emails ignored, 0 customer service.

« Last Edit: Wed, 24 April 2019, 18:10:15 by redbanshee »
Logged

Offline thesiscamper

  • * Maker
  • Posts: 975
    • Keyrenders
Re: [GB] KIRA80 & KIRA S
« Reply #1043 on: Wed, 24 April 2019, 18:40:32 »
Quote from: takai on Tue, 23 April 2019, 18:10:24
I got my board last week and found some scratches on the plate.
zF quality control seems not good.

thesiscamper: do you have plan to share plate data?

Show Image


I don't think EVE changed anything (ie. screw holes), I've attached the file.

edit: to the guy who downloaded the earlier file this new attachment might work better.
« Last Edit: Wed, 24 April 2019, 18:43:37 by thesiscamper »
Logged


"haters are confused admirers"

Offline takai

  • Posts: 11
Re: [GB] KIRA80 & KIRA S
« Reply #1044 on: Thu, 25 April 2019, 00:27:16 »
You’ve really helped me out here. Thanks so much!
Logged

Offline thesiscamper

  • * Maker
  • Posts: 975
    • Keyrenders
Re: [GB] KIRA80 & KIRA S
« Reply #1045 on: Fri, 26 April 2019, 07:13:51 »
EVE just informed me through Louis that zF should be shipping out the numpads within 15 to 20 days, he doesn't know the plan for the kits with the wrong colors though. He also apologized for his mistakes and promises to take customers more seriously.
Logged


"haters are confused admirers"

Offline Okonomiyaki#2832

  • Posts: 549
  • Eating Okonomiyaki
Re: [GB] KIRA80 & KIRA S
« Reply #1046 on: Fri, 26 April 2019, 10:40:23 »
Quote from: thesiscamper on Fri, 26 April 2019, 07:13:51
EVE just informed me through Louis that zF should be shipping out the numpads within 15 to 20 days, he doesn't know the plan for the kits with the wrong colors though. He also apologized for his mistakes and promises to take customers more seriously.

Saw a similar notice on QQ, zf had contacted Eve and promised to send the payment for the numpads. Should the payment arrive, the numpads will shipped out within 15 to 20 days. Apologies for the delay, on behalf of zf.
Logged

Offline Bubblegum

  • Posts: 177
Re: [GB] KIRA80 & KIRA S
« Reply #1047 on: Tue, 30 April 2019, 03:21:27 »
Quote from: kokugatsu on Tue, 23 April 2019, 12:48:03
Quote from: schlep on Mon, 22 April 2019, 08:44:53
Quote from: kokugatsu on Mon, 22 April 2019, 00:13:57
Still no shipping invoice for "priority" Poseidon Blue, jesus

Where are you located? I haven't received mine either and mine is the same colour as yours. Could it be due to the colour?

I emailed zFrontier abt 2 weeks ago and he said he will send me an invoice soon. That was on April 8th and until now I have not received any shipping invoice nor the board.

I am based in Singapore by the way.

Also in SEA, and yeah I believe the delay is mainly because of our colour.

FYI I got an email from Alex, saying the invoice should be going out this week. Will let you know when I get mine  :)

Did you get an invoice? Nothing here so far, and no reply to mails. I picked Poseidon Blue case and Pearl Blue plate, both "problem" colors. Maybe Pearl Blue is holding my order back, but who knows since there's no communication? I've seen Poseidon Blue Kira TKL go up on mechmarket already, and my "priority" GB board might not even be finished...
Logged

Offline sroop

  • Posts: 91
Re: [GB] KIRA80 & KIRA S
« Reply #1048 on: Tue, 30 April 2019, 11:20:43 »
Quote from: thesiscamper on Wed, 24 April 2019, 18:40:32
Quote from: takai on Tue, 23 April 2019, 18:10:24
I got my board last week and found some scratches on the plate.
zF quality control seems not good.

thesiscamper: do you have plan to share plate data?

Show Image


I don't think EVE changed anything (ie. screw holes), I've attached the file.

edit: to the guy who downloaded the earlier file this new attachment might work better.

Hi thesis, do you have an ANSI plate file by chance? Looking to make a POM plate if or when I eventually get this kit.
Logged

Offline Jkush463

  • Posts: 368
  • Location: Aurora, IL
Re: [GB] KIRA80 & KIRA S
« Reply #1049 on: Tue, 30 April 2019, 21:22:16 »
Quote from: thesiscamper on Fri, 26 April 2019, 07:13:51
EVE just informed me through Louis that zF should be shipping out the numpads within 15 to 20 days, he doesn't know the plan for the kits with the wrong colors though. He also apologized for his mistakes and promises to take customers more seriously.
wait what there shipping them next week but i didnt get to buy one did i miss the buy or?
Logged
Pages: « 1 ... 16 17 18 19 20 [21] 22 23 24 25 26 »   Go Up
« previous next »