geekhack

geekhack Marketplace => Interest Checks => Topic started by: illusixn on Tue, 28 June 2022, 07:38:26

Title: [IC] icp - Compact 1800
Post by: illusixn on Tue, 28 June 2022, 07:38:26
icp

(https://i.imgur.com/X6O5QGb.jpg)

icp is a compact 1800 layout keyboard.
I have a talent for naming things. As such, the extremely creative name I've come up with follows the nomenclature of TX-CP, hbcp, and BOK.CP.
I would eventually like to run a group buy for this project, so I am using this post to gauge interest.
IC form: https://forms.gle/6mhqU53CkFUHrjuk6


Specs
Layout: Compact 1800 (all layout options to be included will be in an image below)
Typing Angle: 5 degrees
Mounting: Top mount
Case materials: 6063 aluminum top/bottom, brass weight
Plate: 5052 aluminum full plate by default, would like to offer PC plates as well
PCB: 1.6mm, solder only, using C3 Unified Daughterboard (https://github.com/ai03-2725/Unified-Daughterboard), QMK/VIA
Front height(s): ~18.2mm, ~18.9mm, ~22.1mm ("unadjusted", "adjusted", and EKH. Everyone likes to use different numbers so take your pick.)


Layout Options
The below layout options will be supported:

(https://i.imgur.com/hsg5LLz.png)


Prototype Photos

(https://i.imgur.com/NA4LKac.jpg) (https://i.imgur.com/HE3jRzd.jpg)
(https://i.imgur.com/5X9JwKC.jpg)
(https://i.imgur.com/Oq2ungG.jpg) (https://i.imgur.com/bOfXxtk.jpg)
(https://i.imgur.com/Da4TaKb.jpg)
(https://i.imgur.com/KzNC5v2.jpg)


Possible Buy Details
A group buy for this is quite a ways out, so these details are subject to change.
  - Pricing: ~$575 (Final price could be higher or could be lower by the time the buy happens. I'll update pricing once I have final quotes closer to the time of gb)
  - Number of units: 20
  - Color options: Anodized silver and anodized black, 10 of each
  - No estimated group buy date since I'll be prototyping until I have the design dialed in to where I want it, and I'm not sure exactly how long that will take.


Project Progress/Planning
Prototype 1 - built, identified change areas
Rev2 of the PCB ready to be proto'd
  - I want to have a clock on the oled, so I've added a coin cell battery holder
  - Ribbon cable to connect to oled daughterbaord instead of JST
  - oled daughterboard work mostly complete. I have the 3D file in hand, currently checking for any necessary adjustments.
  - rev2 protos will be ordered once the oled db is finished
[Post IC and gather feedback]
Complete firmware - Main portion of the firmware already completed
  - Finalize information shown on oled
  - Trying to figure out how to best display some dynamic info. Currently looking at this: qmk-hid-display (https://github.com/BlankSourceCode/qmk-hid-display)
  - Simple battery level indicator once I have rev2 PCB in
Prototype 2 - Will be ordered once some design details are finalized. Targetting end of July/beginning of August to place that order. Gonna get it in black since that's the second color I'd like to run.
  - Possible switch to SKUF from SJ5302 bumpons
...?

IC form: https://forms.gle/6mhqU53CkFUHrjuk6

Thanks for any feedback and/or support for this project.
Title: Re: [IC] icp - Compact 1800
Post by: illusixn on Tue, 28 June 2022, 07:38:44
(https://i.imgur.com/4wk5FAc.jpg)

reserved
Title: Re: [IC] icp - Compact 1800
Post by: Oggi on Tue, 28 June 2022, 07:43:57
(https://imgur.com/qA049Nz.jpg])
Title: Re: [IC] icp - Compact 1800
Post by: FiEND on Tue, 28 June 2022, 11:48:20
came in expecting an insane clown posse inspired board. MMFWCL!
Title: Re: [IC] icp - Compact 1800
Post by: Laur on Tue, 28 June 2022, 17:30:53
yessir.
Title: Re: [IC] icp - Compact 1800
Post by: mcmcmc on Tue, 28 June 2022, 18:25:19
yes. this should probably be a private gb, but yes
Title: Re: [IC] icp - Compact 1800
Post by: maelkesnot on Tue, 28 June 2022, 20:14:03
awooga, woah mama, kaboinka :eek: :eek:
Title: Re: [IC] icp - Compact 1800
Post by: ankit on Tue, 28 June 2022, 21:24:42
Any photo of the side profile avail?
Title: Re: [IC] icp - Compact 1800
Post by: HungHingDaiLo on Tue, 28 June 2022, 23:14:28
Yes please. Been waiting for this since last year 

Great job illusixn :thumb:
Title: Re: [IC] icp - Compact 1800
Post by: spedywin on Wed, 29 June 2022, 01:29:50
nice
Title: Re: [IC] icp - Compact 1800
Post by: treeleaf64 on Fri, 01 July 2022, 23:25:03
good work board but doesn't need the weight because big keyboards already weigh quite a lot
Title: Re: [IC] icp - Compact 1800
Post by: Kokaloo on Sat, 02 July 2022, 00:02:20
keycaps, thock, clack and stabs
****ing keyboards how do they work
Title: Re: [IC] icp - Compact 1800
Post by: Laur on Sat, 02 July 2022, 06:02:42
ne side profile photo? otherwise looks good, am interested.
Title: Re: [IC] icp - Compact 1800
Post by: HappyB0T on Sat, 02 July 2022, 06:30:20
came in expecting an insane clown posse inspired board. MMFWCL!
ditto - this is magic.
Title: Re: [IC] icp - Compact 1800
Post by: illusixn on Sat, 02 July 2022, 10:51:47
Any photo of the side profile avail?
ne side profile photo? otherwise looks good, am interested.

Forgot to add that in. Kept the sides pretty simple.
Side and front pics added into op.
Title: Re: [IC] icp - Compact 1800
Post by: vodanhdaisu on Fri, 29 July 2022, 09:40:31
I'm a very fan of 1800 and 980 keyboard. This project is definitely the one I have to put to my collections  :thumb:
Title: Re: [IC] icp - Compact 1800
Post by: iamtragic on Sat, 30 July 2022, 00:10:05
5 degrees? Say less.

Yes.
Title: Re: [IC] icp - Compact 1800
Post by: superjackie on Sat, 30 July 2022, 00:48:15
shipping 2024?
Title: Re: [IC] icp - Compact 1800
Post by: Nonnegaard on Mon, 01 August 2022, 15:30:36
yes. this should probably be a private gb, but yes
why
Title: Re: [IC] icp - Compact 1800
Post by: Nonnegaard on Mon, 01 August 2022, 16:05:08
good work board but doesn't need the weight because big keyboards already weigh quite a lot
treeleaf64 ▾ ⇆English ▾
______________________
big keyboards already weigh quite a lot
______________________
I'm weak