Author Topic: [IC] Aluminum Switch Opener: "The Nutcracker"(GB is LIVE, Link in GB OP) (Read 26428 times)

dario · « **Reply #50 on:** Sat, 17 November 2018, 05:52:23 »

Yes, we need ALPS opener more than anything else. There are few MX openers on the market, but none for ALPS. Whoever makes it first gets all the girls.

_ODIN_ · « **Reply #51 on:** Sat, 17 November 2018, 05:52:33 »

How about the possibility to include one in your order of the Vulcano 660?

Gesendet von meinem H8416 mit Tapatalk

captsis · « **Reply #52 on:** Sat, 17 November 2018, 06:03:52 »

Dope. In

Sent from my SM-G950U using Tapatalk

ilouis_07 · « **Reply #53 on:** Sat, 17 November 2018, 07:18:36 »

Quote from: _ODIN_ on Sat, 17 November 2018, 05:52:33

How about the possibility to include one in your order of the Vulcano 660?

Gesendet von meinem H8416 mit Tapatalk

i think this gb will launch before v66

jumpmineralwater · « **Reply #54 on:** Sat, 17 November 2018, 07:57:23 »

Looks interesting. From the instagram video it looks easy to open the switch

vegs · « **Reply #55 on:** Sat, 17 November 2018, 08:18:23 »

Interested!

Geckt · « **Reply #56 on:** Sat, 17 November 2018, 08:28:31 »

Dope.

I'll suggest another name for this tool, I name it "The Nutcracker". XD

Sent from my G8142 using Tapatalk

. · « **Reply #57 on:** Sat, 17 November 2018, 09:48:42 »

How about making the entire base threaded so you can close it by screwing the two pieces together?

SteffeMK · « **Reply #58 on:** Sat, 17 November 2018, 09:53:13 »

I love this! Haven't tried a 3d printed one but I imagine they are quite fragile, so this would be awesome.

Skickat från min SM-N950F via Tapatalk

ilouis_07 · « **Reply #59 on:** Sat, 17 November 2018, 10:02:09 »

Quote from: maartenwut on Sat, 17 November 2018, 09:48:42

How about making the entire base threaded so you can close it by screwing the two pieces together?

It will increase the cnc cost. I planed to do but gave up that idea.

sythie · « **Reply #60 on:** Sat, 17 November 2018, 10:53:46 »

In as well.

taropaste · « **Reply #61 on:** Sat, 17 November 2018, 11:53:29 »

I absolutely DO NOT need this. But I totally WANT it!

I like your design. I'm in!

gutsack · « **Reply #62 on:** Sat, 17 November 2018, 12:15:57 »

Give. Give now.

hikashi1988 · « **Reply #63 on:** Sat, 17 November 2018, 12:36:06 »

dude.
count me in!

Acereconkeys · « **Reply #64 on:** Sat, 17 November 2018, 16:10:05 »

Quote from: dario on Sat, 17 November 2018, 05:52:23

Yes, we need ALPS opener more than anything else. There are few MX openers on the market, but none for ALPS. Whoever makes it first gets all the girls.

Alps are pretty easy to open though.

missylo · « **Reply #65 on:** Sat, 17 November 2018, 17:20:16 »

Quote from: Geckt on Sat, 17 November 2018, 08:28:31

Dope.

I'll suggest another name for this tool, I name it "The Nutcracker". XD

Sent from my G8142 using Tapatalk

Love this!!! Im def in for a nut cracker

Sent from my iPhone using Tapatalk

hahihuhei · « **Reply #66 on:** Sat, 17 November 2018, 18:56:57 »

Interested.

Sent from my Pixel 2 XL using Tapatalk

ilouis_07 · « **Reply #67 on:** Sat, 17 November 2018, 20:36:54 »

kailh switch opener? here we go:)

https://www.instagram.com/p/BqSYIldn3Zd/?utm_source=ig_web_button_share_sheet

Need it for halo, need it for HOLY PANDA.

euphxenos · « **Reply #68 on:** Sat, 17 November 2018, 22:59:14 »

Good stuff. I'd be in for one of each.

Rubbermilitia · « **Reply #69 on:** Sat, 17 November 2018, 23:16:23 »

Though this does look great so far, I would really like to see proof that the switch opener doesn't damage the switches at all from use...

dr_unconscionable · « **Reply #70 on:** Sat, 17 November 2018, 23:29:36 »

I've been looking to get something like this for a while now! Definitely in

bengine · « **Reply #71 on:** Sun, 18 November 2018, 02:56:48 »

I’m in

ipley · « **Reply #72 on:** Sun, 18 November 2018, 03:07:13 »

I'm In.

sythie · « **Reply #73 on:** Sun, 18 November 2018, 03:16:53 »

Does one of these support the opening of Outemu switches?
Looks like the Kailh cracker might work.

ilouis_07 · « **Reply #74 on:** Sun, 18 November 2018, 05:07:38 »

Quote from: sythie on Sun, 18 November 2018, 03:16:53

Does one of these support the opening of Outemu switches?
Looks like the Kailh cracker might work.

I think kailh cracker may work.

smurkcity12 · « **Reply #75 on:** Sun, 18 November 2018, 05:08:47 »

Glad you worked out a kailh opener as well. Now I can order one of each and when showing other people what they are, I can say look at deez nutz.

But seriously, these look nice and I'm excited for both.

ilouis_07 · « **Reply #76 on:** Sun, 18 November 2018, 05:09:29 »

Quote from: smurkcity12 on Sun, 18 November 2018, 05:08:47

Glad you worked out a kailh opener as well. Now I can order one of each and when showing other people what they are, I can say look at deez nutz.

But seriously, these look nice and I'm excited for both.

Thanks

Kerasan · « **Reply #77 on:** Sun, 18 November 2018, 05:16:32 »

Quote from: ilouis_07 on Sun, 18 November 2018, 05:09:29

Quote from: smurkcity12 on Sun, 18 November 2018, 05:08:47
Glad you worked out a kailh opener as well. Now I can order one of each and when showing other people what they are, I can say look at deez nutz.

But seriously, these look nice and I'm excited for both.
Thanks

when will it start?

KMK Labs

ilouis_07 · « **Reply #78 on:** Sun, 18 November 2018, 05:22:31 »

Quote from: Kerasan on Sun, 18 November 2018, 05:16:32

Quote from: ilouis_07 on Sun, 18 November 2018, 05:09:29
Quote from: smurkcity12 on Sun, 18 November 2018, 05:08:47
Glad you worked out a kailh opener as well. Now I can order one of each and when showing other people what they are, I can say look at deez nutz.

But seriously, these look nice and I'm excited for both.
Thanks
should be next week.

when will it start?

KMK Labs

NINJER · « **Reply #79 on:** Sun, 18 November 2018, 05:48:50 »

Interested.

longsock · « **Reply #80 on:** Sun, 18 November 2018, 06:52:21 »

been following this project on IG! (: looks ten times better than the 3d ones

Sent from my SM-G965F using Tapatalk

zekkin · « **Reply #81 on:** Sun, 18 November 2018, 09:13:31 »

Hell yeah this looks awesome!

Vireca · « **Reply #82 on:** Sun, 18 November 2018, 14:27:53 »

The Kailh one will work with BOX Switches too?

jestemfranklin · « **Reply #83 on:** Sun, 18 November 2018, 15:41:36 »

Great work! I’m in for one.

Gati · « **Reply #84 on:** Sun, 18 November 2018, 18:32:50 »

100% in for one

Edit: will this be limited? I don’t wanna miss out

ilouis_07 · « **Reply #85 on:** Sun, 18 November 2018, 18:56:54 »

Quote from: Vireca on Sun, 18 November 2018, 14:27:53

The Kailh one will work with BOX Switches too?

https://instagram.com/p/BqV668IHoK3/

I updated just now:)

ilouis_07 · « **Reply #86 on:** Sun, 18 November 2018, 18:57:44 »

Quote from: Gati on Sun, 18 November 2018, 18:32:50

100% in for one

Edit: will this be limited? I don’t wanna miss out

He Should be this week Friday.

Nzo · « **Reply #87 on:** Sun, 18 November 2018, 19:08:37 »

100% in

odd · « **Reply #88 on:** Sun, 18 November 2018, 20:16:54 »

Count me in for 1 or 2 for sure.

SleepIsAllINeed · « **Reply #89 on:** Sun, 18 November 2018, 22:29:21 »

count me in for this

vonswoopington · « **Reply #90 on:** Sun, 18 November 2018, 23:05:40 »

I am down for one

ilouis_07 · « **Reply #91 on:** Mon, 19 November 2018, 00:16:02 »

For first version we did it in this way.

It can open black housing cherry mx switch because the material is soft .(can open it quite easily,pic nut1)

But when we using gateron(clear housing) , zealios and other transparent housing switches, it cannot open the switch as pic nut2 shown. The problem here is because the slope of the tooth, it is too sharp.

ilouis_07 · « **Reply #92 on:** Mon, 19 November 2018, 00:18:50 »

This is version 2 prototype in pic nut3.

we increased the slope of the tooth, fixed the problem. It can open cherry mx switch, zealios, gateron switch very easily.

ilouis_07 · « **Reply #93 on:** Mon, 19 November 2018, 00:26:55 »

updated by 19th Nov

stryker09 · « **Reply #94 on:** Mon, 19 November 2018, 02:42:25 »

Would be awesome if the MX and Box openers can be "screwed" on and off the top, just a thought.
But either way, awesome job! Can't wait for the GB, this is a godsend

AlcoholEnthusiast · « **Reply #95 on:** Mon, 19 November 2018, 02:43:16 »

im down

Acereconkeys · « **Reply #96 on:** Mon, 19 November 2018, 02:43:53 »

Looking great

gimme gimme.

ilouis_07 · « **Reply #97 on:** Mon, 19 November 2018, 02:48:49 »

Quote from: stryker09 on Mon, 19 November 2018, 02:42:25

Would be awesome if the MX and Box openers can be "screwed" on and off the top, just a thought.
But either way, awesome job! Can't wait for the GB, this is a godsend

Hi it is a good idea and i also planned to do, but cost is much more then 2x individual crackers. So i stick with current one so far, thanks for your advice:D

phatty · « **Reply #98 on:** Mon, 19 November 2018, 03:17:53 »

I'm keen for a bunch of these! Would love to have them here in Australia for anyone looking for them.

krey · « **Reply #99 on:** Mon, 19 November 2018, 04:31:44 »

If only there was a golden nut cracker.

News:

Author Topic: [IC] Aluminum Switch Opener: "The Nutcracker"(GB is LIVE, Link in GB OP) (Read 26428 times)