ok guys, could anyone missing the scoops and with the crooked right shift
please fill out this form
http://goo.gl/forms/xdBFkVjaOT
also, if you fill out the form, could you please quote this post and say you have done it, not for my benefit, but to maximise the chances of people seeing the form
I love you guys, but I hate SA. What to do?
I'll probably buy it anyway because of the people promoting it.
I love you guys, but I hate SA. What to do?
I'll probably buy it anyway because of the people promoting it.
"You do not like them,
so you say.
Try them, try them,
and you may.
Try them and you may, I say."
:D
Is there any chance the "`~" and "\|" keys could be included in both colors so people could chose between the classic and the symmetrical look?
Is there any chance the "`~" and "\|" keys could be included in both colors so people could chose between the classic and the symmetrical look?
Is there any chance the "`~" and "\|" keys could be included in both colors so people could chose between the classic and the symmetrical look?
Is there any chance the "`~" and "\|" keys could be included in both colors so people could chose between the classic and the symmetrical look?
It goes against my belief system.
I am not an expert on SA keys, but if I am not mistaken there were always issues with the profile of the shift keys, because Signature Plastics doesn't have the correct molds.
Has this been fixed yet?
Much as I love the colours that is one hell of a lot of keycaps to do a JD40!
At a glance it looks like you'd only need to add another set of letters to populate a full size in ISO as well...
I'll have to buy two sets so I can have one on a full size board and one on my jd40.
Show Image(http://i.imgur.com/oMoziOM.gif)
so in, this is awesome
Any chance for 4 keys to go above the numberpad to fill out 108 keys?
Any chance for 4 keys to go above the numberpad to fill out 108 keys?
Now dammit, that's what Clacks are for! :))
You don't like those ISO punctuation keys for that??
Any chance for 4 keys to go above the numberpad to fill out 108 keys?
Now dammit, that's what Clacks are for! :))
You don't like those ISO punctuation keys for that??
Why not a carpe keyboards key and a ctrlalt key then those can be used with the top row geek hack keys.
Or I'll just buy some of the blanks from SP like I did for penumbra :))
When do you expect these to appear on the [CTRL}ALT website?
When do you expect these to appear on the [CTRL}ALT website?
As SmallFry would say... Soon™
Looks great.
I'm unsure how I feel about SA since I've never tried it so I'm still torn on this..
Looks great.
I'm unsure how I feel about SA since I've never tried it so I'm still torn on this..
Could you reorder the image so that it better shows which rows the additional modifiers and ISO keys are on?
It looks as if there are two DEL keys on the same row and that the blank modifiers are on row 4.
If the \| key is for UK ISO then it should be on row 4. No Fn for bottom row also.
Looks great.
I'm unsure how I feel about SA since I've never tried it so I'm still torn on this..
Ahhh the last words of a key-cap virgin. Once you've been gaped by SA, nothing else will ever feel the same for any of your keyboards ;D .
Looks great.
I'm unsure how I feel about SA since I've never tried it so I'm still torn on this..
Ahhh the last words of a key-cap virgin. Once you've been gaped by SA, nothing else will ever feel the same for any of your keyboards ;D .
lmao. gaped? holy ****, son you crazy.
I am not meant to offend anyone I swear.But since you choose SP to manufacture the keysets,why not use PMK for a better producting&shipping speed?
I am not meant to offend anyone I swear.But since you choose SP to manufacture the keysets,why not use PMK for a better producting&shipping speed?
I thought PMK and SP were tied together, like they would be the same company or something.
I am not meant to offend anyone I swear.But since you choose SP to manufacture the keysets,why not use PMK for a better producting&shipping speed?
I thought PMK and SP were tied together, like they would be the same company or something.
Basically PMK is SP's attempt at having a group buy system where any and everyone can run a group buy. Not everyone is a fan for many different reasons.
Quite frankly I'm glad to see community ran group buys. :thumb:
I am not meant to offend anyone I swear.But since you choose SP to manufacture the keysets,why not use PMK for a better producting&shipping speed?
I thought PMK and SP were tied together, like they would be the same company or something.
Basically PMK is SP's attempt at having a group buy system where any and everyone can run a group buy. Not everyone is a fan for many different reasons.
Quite frankly I'm glad to see community ran group buys. :thumb:
Would using PMK really speed things up? Or was the new account just trolling?
Might have to go for this.
SA is by far the best profile that SP makes. Loving the fully contoured too rather than uniform row 3.
A group buy with no price? I am a bit lost here, is this a sort of secret code?
Yeah, we are working on getting a quote for this, and trying to keep it as close to $100 or so per set as we can. By eliminating "child" kits, the base is only slightly more expensive than buying strictly alphas and mods, and you don't have to add $25 for a numpad, $15 for ISO, $20 for Tsangan, $20 for JD40, etc.
A group buy with no price? I am a bit lost here, is this a sort of secret code?
Read much?Yeah, we are working on getting a quote for this, and trying to keep it as close to $100 or so per set as we can. By eliminating "child" kits, the base is only slightly more expensive than buying strictly alphas and mods, and you don't have to add $25 for a numpad, $15 for ISO, $20 for Tsangan, $20 for JD40, etc.
I am not meant to offend anyone I swear.But since you choose SP to manufacture the keysets,why not use PMK for a better producting&shipping speed?
I thought PMK and SP were tied together, like they would be the same company or something.
Basically PMK is SP's attempt at having a group buy system where any and everyone can run a group buy. Not everyone is a fan for many different reasons.
Quite frankly I'm glad to see community ran group buys. :thumb:
Would using PMK really speed things up? Or was the new account just trolling?
Well SP allows PMK group buys to bump other already in production group buys, which I personally find to be a bit sleazy.
So whether or not it would be quicker I can't say for sure, BUT I don't want to get this set at the cost of delaying a set I purchased a year ago (R5).
OP updated with mockup showing row profiles. :)
Might have to go for this.
SA is by far the best profile that SP makes. Loving the fully contoured too rather than uniform row 3.
Why you do prefer contoured? with a flat profile you need less keys to fit different layouts properly.
Might have to go for this.
SA is by far the best profile that SP makes. Loving the fully contoured too rather than uniform row 3.
Why you do prefer contoured? with a flat profile you need less keys to fit different layouts properly.
Might have to go for this.
SA is by far the best profile that SP makes. Loving the fully contoured too rather than uniform row 3.
Why you do prefer contoured? with a flat profile you need less keys to fit different layouts properly.
I believe most people who complain about not liking SA profile do so because they have only ever used the uniform profile (all row 3) kits. I much prefer the contoured profile, due to the feeling when typing on them. No, it's not absolutely perfect, due to the small compromises we have to make with regard to the tooling, but it's better than the flat typing experience.
I know this leaves some people out who use different layouts, and thus need to swap keycaps into different rows, but those users probably understand that group buys are all about economy of scale. There has to be a balance between the number of keys in the kit (to keep the costs low), and the number of users affected by additions and omissions.
OP updated with mockup showing row profiles. :)
OP updated with mockup showing row profiles. :)
Impossibruuuuu, this kit is a scaaaaam
2 good to be true T_T
I haven't read through everything but I will just ask, approximately how much will it be per full kit since no extra kits since there is only a base kit that contains everything?
Yeah, we are working on getting a quote for this, and trying to keep it as close to $100 or so per set as we can. By eliminating "child" kits, the base is only slightly more expensive than buying strictly alphas and mods, and you don't have to add $25 for a numpad, $15 for ISO, $20 for Tsangan, $20 for JD40, etc.
This looks great! Yay for contoured SA.
Any change of getting the ~ and | keys in the darker grey color?
I'd love to be able to pick up an extra GE spacebar or three. I'm really rough on mine and I'd like to have a few backups. Is that something that can be arranged? Or would I need to contact SP and hope that they have some extras in their inventory?
I know its probably convention, but why its the "\" key always the same colors as the alphas instead of the mods? To me it looks much cleaner, especially on a 60% if it matches the other mods.
Might have to go for this.
SA is by far the best profile that SP makes. Loving the fully contoured too rather than uniform row 3.
Why you do prefer contoured? with a flat profile you need less keys to fit different layouts properly.
I believe most people who complain about not liking SA profile do so because they have only ever used the uniform profile (all row 3) kits. I much prefer the contoured profile, due to the feeling when typing on them. No, it's not absolutely perfect, due to the small compromises we have to make with regard to the tooling, but it's better than the flat typing experience.
I know this leaves some people out who use different layouts, and thus need to swap keycaps into different rows, but those users probably understand that group buys are all about economy of scale. There has to be a balance between the number of keys in the kit (to keep the costs low), and the number of users affected by additions and omissions.
This looks great! Yay for contoured SA.
Any change of getting the ~ and | keys in the darker grey color?
Sorry, it's been requested, but I don't encourage people to do wrong things. :P
@jdcarpe I actually do think we should have some space bars available just in case we wear our old ones out since I know that I tend to wear out my space bars extremely quickly.
I was just being sarcastic on my previous post btw so I hope you wern't offended =) :thumb:
I had no clue you can order extras by contacting them. That aqlctually makeanit quite nice.
I think my question has been lost in all these other awesome posts about this awesome keycap set, so I'll pose it again as I think others will also be interested:
Are you going to wait for SP to finish the molds for the Row 4 Shift keys or will there be a small GB later for them like the PuLSE GB?
I am not an expert on SA keys, but if I am not mistaken there were always issues with the profile of the shift keys, because Signature Plastics doesn't have the correct molds.
Has this been fixed yet?
Correct, as it stands now, Shifts will all be Row 3 profile, as before. When and if Signature Plastics is willing to correct this glaring oversight on their part, we would love to have the correct Row 4 profile Shifts included. If they become available after the group buy ends, I plan to do a "Shifts-only" GB for the correct profile caps.
This looks great! Yay for contoured SA.
Any change of getting the ~ and | keys in the darker grey color?
Sorry, it's been requested, but I don't encourage people to do wrong things.
Man, all it needs is the 1.5u backspace and it's perfect!
Man, all it needs is the 1.5u backspace and it's perfect!
1.75x capslock replacement you mean right?
FYI, in Pulse set, we have Row3 2.25x shift, 2.75x shift, but Row4 1.75x shift, 1x fn.
I think my question has been lost in all these other awesome posts about this awesome keycap set, so I'll pose it again as I think others will also be interested:
Are you going to wait for SP to finish the molds for the Row 4 Shift keys or will there be a small GB later for them like the PuLSE GB?
Oops, sorry Oobly. I need to stick this info in the OP somewhere.I am not an expert on SA keys, but if I am not mistaken there were always issues with the profile of the shift keys, because Signature Plastics doesn't have the correct molds.
Has this been fixed yet?
Correct, as it stands now, Shifts will all be Row 3 profile, as before. When and if Signature Plastics is willing to correct this glaring oversight on their part, we would love to have the correct Row 4 profile Shifts included. If they become available after the group buy ends, I plan to do a "Shifts-only" GB for the correct profile caps.
FYI, in Pulse set, we have Row3 2.25x shift, 2.75x shift, but Row4 1.75x shift, 1x fn.
This. Please update the set and move the 1x Fn and 1.75x Shift to Row 4 so it matches when we do eventually get our Row 4 Shifts.
FYI, in Pulse set, we have Row3 2.25x shift, 2.75x shift, but Row4 1.75x shift, 1x fn.
This. Please update the set and move the 1x Fn and 1.75x Shift to Row 4 so it matches when we do eventually get our Row 4 Shifts.
Hmmm, you would rather have the 1.75u and 1u Shift and Fn keys on Row 4, when your left shift will be on Row 3? That would really mess with my head, I think. I haven't tried it with my PuLSE set yet, as I haven't opened the extra keys I bought, only the base kit.
I'll test it out later, but for now I think I'll leave it as is.
I just sent an email to Melissa asking when the Row 4 shift molds would be ready.
And of course, the problem with making the 1.25u Shift a Row 4 key is that the 1.25u size on Row 4 is only available in Matte finish, while the entire rest of the set will be finished in Semi-Matte.
Um.. It's a 1.75x Shift, not 1.25x and 1.75x Row 4 comes in semi-matte. It will make the number of Row 4 Shifts needed later lower.
The 1.5u backspace is for a hhkb layout.Man, all it needs is the 1.5u backspace and it's perfect!
1.75x capslock replacement you mean right?
Okay, if I switched the row profiles to 1-1-2-3-4-4, we could go with something like this:Show Image(http://i.imgur.com/83UY5hk.png)
You guys like that better? I'm leaning toward doing that, and making it a matte finish throughout.
Okay, if I switched the row profiles to 1-1-2-3-4-4, we could go with something like this:Show Image(http://i.imgur.com/83UY5hk.png)
You guys like that better? I'm leaning toward doing that, and making it a matte finish throughout.
I'm new to SP keycaps. Is it possible to see the difference between a matte and semi-matte keycap? One will reflect less the light?
Okay, if I switched the row profiles to 1-1-2-3-4-4, we could go with something like this:Show Image(http://i.imgur.com/83UY5hk.png)
You guys like that better? I'm leaning toward doing that, and making it a matte finish throughout.
Okay, if I switched the row profiles to 1-1-2-3-4-4, we could go with something like this:Show Image(http://i.imgur.com/83UY5hk.png)
You guys like that better? I'm leaning toward doing that, and making it a matte finish throughout.
I'm new to SP keycaps. Is it possible to see the difference between a matte and semi-matte keycap? One will reflect less the light?
This picture (credit to Jil) of the 23 Commando set shows it pretty clearly. The entire keyset is matte finish, except for the Row 3 Shift keys and maybe that windowed Caps LockShow Image(http://i.imgur.com/rgC0tpA.png)
And here are the available profiles and finishes of SAShow Image(http://i.imgur.com/xU1G6oT.png)
Should it not be 1-1-2-3-4-3? The available profiles on spacebars are only row3 from that img.
I'm guessing this will be sold through your own webstore?
Is the stepped 1.75u control key stem centered? If not, the kit should be missing a full touch 1.75u control key with centered stem.
Okay, if I switched the row profiles to 1-1-2-3-4-4, we could go with something like this:Show Image(http://i.imgur.com/83UY5hk.png)
You guys like that better? I'm leaning toward doing that, and making it a matte finish throughout.
Is the stepped 1.75u control key stem centered? If not, the kit should be missing a full touch 1.75u control key with centered stem.
It's off-centered. I'll think about adding it, but a full touch R3 1.75u CTRL is not included at this time.
Is the stepped 1.75u control key stem centered? If not, the kit should be missing a full touch 1.75u control key with centered stem.
It's off-centered. I'll think about adding it, but a full touch R3 1.75u CTRL is not included at this time.
Got it: there is no CTRL replacement cap for caps-lock that may fit standard keyboards, but only for those with off-centered switch for the caps-lock key.
Is the stepped 1.75u control key stem centered? If not, the kit should be missing a full touch 1.75u control key with centered stem.
It's off-centered. I'll think about adding it, but a full touch R3 1.75u CTRL is not included at this time.
Got it: there is no CTRL replacement cap for caps-lock that may fit standard keyboards, but only for those with off-centered switch for the caps-lock key.
Which keyboard have off-centered caps-lock key? More generally how do you know?
OMGoodness...
well...
hmm...
I like it...
Butidunno...
Wallet hack initialized...
Subroutine cancelled by Wife.exe...
Rebooting...
...
Okay, this is close to being locked in. 3-1-2-3-4-3 in semi matte.Show Image(http://i.imgur.com/3EnNjOT.png)
I made a couple additions for the CMD, SUPER, HYPER, META keys, and took out a few blanks. Also, I see where the Control-A and HHKB people are coming from. :)
Okay, this is close to being locked in. 3-1-2-3-4-3 in semi matte.Show Image(http://i.imgur.com/3EnNjOT.png)
I made a couple additions for the CMD, SUPER, HYPER, META keys, and took out a few blanks. Also, I see where the Control-A and HHKB people are coming from. :)
Okay, this is close to being locked in. 3-1-2-3-4-3 in semi matte.Show Image(http://i.imgur.com/3EnNjOT.png)
I made a couple additions for the CMD, SUPER, HYPER, META keys, and took out a few blanks. Also, I see where the Control-A and HHKB people are coming from. :)
That is looking AWESOME!
But surely the extra Esc and GeekHack keys should be Row 1, not Row 2?
Okay, this is close to being locked in. 3-1-2-3-4-3 in semi matte.Show Image(http://i.imgur.com/3EnNjOT.png)
I made a couple additions for the CMD, SUPER, HYPER, META keys, and took out a few blanks. Also, I see where the Control-A and HHKB people are coming from. :)
That is looking AWESOME!
But surely the extra Esc and GeekHack keys should be Row 1, not Row 2?
But surely the extra Esc and GeekHack keys should be Row 1, not Row 2?
I guess I'll sacrifice my Row 2 GH keys for a Row 1 Esc.
Omegerrhd. This is so good. How possible would it be to get an extra CMD with the set? it's the only mod I think most mac users would repeat on both sides.
I guess I'll sacrifice my Row 2 GH keys for a Row 1 Esc.
Why not both?
Okay, if I switched the row profiles to 1-1-2-3-4-4, we could go with something like this:Show Image(http://i.imgur.com/83UY5hk.png)
You guys like that better? I'm leaning toward doing that, and making it a matte finish throughout.
Okay, this is close to being locked in. 3-1-2-3-4-3 in semi matte.Show Image(http://i.imgur.com/3EnNjOT.png)
I made a couple additions for the CMD, SUPER, HYPER, META keys, and took out a few blanks. Also, I see where the Control-A and HHKB people are coming from. :)
Okay, this is close to being locked in. 3-1-2-3-4-3 in semi matte.Show Image(http://i.imgur.com/3EnNjOT.png)
I made a couple additions for the CMD, SUPER, HYPER, META keys, and took out a few blanks. Also, I see where the Control-A and HHKB people are coming from. :)
I might have missed this (sorry), but for those of us using split backspace layouts, what do we put next to the R1 1u \| ? The GH keys are R3 and Del is R2. :(
Also, in the mockup there's a 1u left shift? I don't recall reading what that's for.
For split backspace, wouldn't you assign backspace to the 1.5u key on row 2, and use the ~` and |\ keys where the 2u backspace would be. The only real use case for a row 1 1u backspace key would be if you're using a BigAss Enter, which this keyset doesn't support. :)
1u Shift is for those who want it on the JD40.
Is the stepped 1.75u control key stem centered? If not, the kit should be missing a full touch 1.75u control key with centered stem.
It's off-centered. I'll think about adding it, but a full touch R3 1.75u CTRL is not included at this time.
Got it: there is no CTRL replacement cap for caps-lock that may fit standard keyboards, but only for those with off-centered switch for the caps-lock key.
Which keyboard have off-centered caps-lock key? More generally how do you know?
Most Cherry G80 and G81 boards have offset Caps Lock (with a stepped keycap) and spacebar switches. Almost all others do not. If you take the Caps Lock cap off the switch you can see if it's centred or offset:Show Image(http://i.minus.com/jZ9ao98Ob99op.jpg)
(the reason the dude is upset is the top cap which is from a G80-3850 which doesn't match either standard...)
Middle cap has centred stem, bottom cap has offset. Usually if it's a stepped cap it'll have an offset stem / switch.
Is the stepped 1.75u control key stem centered? If not, the kit should be missing a full touch 1.75u control key with centered stem.
It's off-centered. I'll think about adding it, but a full touch R3 1.75u CTRL is not included at this time.
Got it: there is no CTRL replacement cap for caps-lock that may fit standard keyboards, but only for those with off-centered switch for the caps-lock key.
Which keyboard have off-centered caps-lock key? More generally how do you know?
Most Cherry G80 and G81 boards have offset Caps Lock (with a stepped keycap) and spacebar switches. Almost all others do not. If you take the Caps Lock cap off the switch you can see if it's centred or offset:Show Image(http://i.minus.com/jZ9ao98Ob99op.jpg)
(the reason the dude is upset is the top cap which is from a G80-3850 which doesn't match either standard...)
Middle cap has centred stem, bottom cap has offset. Usually if it's a stepped cap it'll have an offset stem / switch.
So this mean we cannot use Stepped caps on regular (modern) keyboard?
Okay, this is close to being locked in. 3-1-2-3-4-3 in semi matte.Show Image(http://i.imgur.com/3EnNjOT.png)
I made a couple additions for the CMD, SUPER, HYPER, META keys, and took out a few blanks. Also, I see where the Control-A and HHKB people are coming from. :)
Show Image(http://i.imgur.com/3EnNjOT.png)
This looks great! Yay for contoured SA.
Any change of getting the ~ and | keys in the darker grey color?
Sorry, it's been requested, but I don't encourage people to do wrong things.
Perhaps these two keys could be offered in a separate "wrong" kit so those with different preferences can enjoy the keyset and help out the MOQ in the group buy?
Show Image(http://i.imgur.com/Czzy0hU.png)
COMING SOON
It's CG magicShow Image(http://i.imgur.com/Czzy0hU.png)
COMING SOON
Damn that's nice! Is it a box?
CG? Does it stand for a GH user?It's CG magicShow Image(http://i.imgur.com/Czzy0hU.png)
COMING SOON
Damn that's nice! Is it a box?
Okay, this is close to being locked in. 3-1-2-3-4-3 in semi matte.Show Image(http://i.imgur.com/3EnNjOT.png)
I made a couple additions for the CMD, SUPER, HYPER, META keys, and took out a few blanks. Also, I see where the Control-A and HHKB people are coming from. :)
Looks great so far! Though, one suggestion I have is:
For the benefit of those switching out the WIN keys, I would suggest doubling down on the SUPER keys (the logical WIN substitute) and you could drop the META key to keep the numbers the same, as ALT <-> META, so you would need two anyways, just one would be lopsided. One HYPER would still be fine if you wanted to put it in place of the MENU, as there really is not an analogue to it on current keyboards.
Oh, and are you going dishes or nipples for the homing keys? ;D
This looks great! Yay for contoured SA.
Any change of getting the ~ and | keys in the darker grey color?
Sorry, it's been requested, but I don't encourage people to do wrong things.
Perhaps these two keys could be offered in a separate "wrong" kit so those with different preferences can enjoy the keyset and help out the MOQ in the group buy?
I think that's a good idea.
The lack of symmetry would keep me from joining this GB.
I mean I can understand that you don't like it, but adding extra options doesn't hurt anybody or does it?
This looks great! Yay for contoured SA.
Any change of getting the ~ and | keys in the darker grey color?
Sorry, it's been requested, but I don't encourage people to do wrong things.
Perhaps these two keys could be offered in a separate "wrong" kit so those with different preferences can enjoy the keyset and help out the MOQ in the group buy?
I think that's a good idea.
The lack of symmetry would keep me from joining this GB.
I mean I can understand that you don't like it, but adding extra options doesn't hurt anybody or does it?
I wouldn't opt out for that reason alone, if I were you.
Hint: Do you remember engicoder's Rad Hard pack on PMK that complimented the Nuclear Data set? *wink wink*
This looks great! Yay for contoured SA.
Any change of getting the ~ and | keys in the darker grey color?
Sorry, it's been requested, but I don't encourage people to do wrong things.Show Image(https://s3.amazonaws.com/tapatalk-emoji/emoji14.png)
Perhaps these two keys could be offered in a separate "wrong" kit so those with different preferences can enjoy the keyset and help out the MOQ in the group buy?
I think that's a good idea.
The lack of symmetry would keep me from joining this GB.
I mean I can understand that you don't like it, but adding extra options doesn't hurt anybody or does it?
I wouldn't opt out for that reason alone, if I were you.
Hint: Do you remember engicoder's Rad Hard pack on PMK that complimented the Nuclear Data set? *wink wink*
I would just like to say that I am really in favour of this style of group buy :thumb:
To me it has vibes of the "80-20" rule going on; offering a lower amount of kits (the 20%) will satisfy a large percentage of the potential user base (the 80%). Sure there are going to be some of our friends who are missing some keys with from the main kit, but with a friendly attitude towards people running their own mini-buys those problems can be solved.
Being relatively new to the keycap game I remember being confused by the 'main kit + child kits' standard. On PMK where people go in on buying many kits with the whole order hinging on something like the ISO kit (DSA home row mods, ErgoDox legends, etc). When a buy like that goes live, and a vital child-buy doesn't drop people want to back on all of the kits they ordered which messes with the pricing -or- they are left unsatisfied and maybe have to try and sell their caps at a later date.
I can't think of many companies that would pay give the amount of attention to their audience as the GB leaders on GH. We then have to remember that it is normally only one person who is trying to juggle all of the personal preference, custom legend ideas and all the other niche requests. On top of that they do it for the love of keyboards, not for profit. I think this format will lead to less stress/hassle for GB leaser and in this case that looks like it is going to propagate into a quick turn around, which hopefully leads to a high number or orders and a low price for the community!
I hope the people who are after a few specific keys will still want to go in on this and then set up their own mini-GB and help out others who are after the same thing. These key cap sets are for the community and it feels good that the GB leaders are open to 'decentralizing' the ownership a bit so we can get nice extras like the Rad Hard pack and Out Of The Vault in Nuclear Data Green (for example). Hack'd by Geeks ErgoDox kit anyone ;)
Anyway. Thanks JDCarpe and the CtrlAlt bros, I'm in for my first full SA set :D
Pffft ...
(Attachment Link)
:p :cool:
:lol:I am not an expert on SA keys, but if I am not mistaken there were always issues with the profile of the shift keys, because Signature Plastics doesn't have the correct molds.
Has this been fixed yet?
Correct, as it stands now, Shifts will all be Row 3 profile, as before. When and if Signature Plastics is willing to correct this glaring oversight on their part, we would love to have the correct Row 4 profile Shifts included. If they become available after the group buy ends, I plan to do a "Shifts-only" GB for the correct profile caps.
There is nothing to be fixed!
The 2 Shift keys (2.25 and 2.75 units) have been made for Diatec and they chose row 3.
You can be lucky that there exist molds for 6.25 and 7 units space bars, funded through the Round 4 group buy, which made it possible to use sphericals on standard keyboards at all!
:o
I also hope that everybody appreciates that the participants of Round 5 funded the mold for the row 1 2 units key (Back Space).
:o
About the remaining keys:
I'm so sorry, but in Round 6 I will let them make a 1.5 units hat cap, so there will be no money for 1.25, 2.25 and 2.75 units molds in row 4.
:o
So, why not just take a bit more money per kit and let them make at least one new mold, so you can contribute to the tool pool, instead of just delaying Round 5 production for another month or two ...
:o
:lol:I am not an expert on SA keys, but if I am not mistaken there were always issues with the profile of the shift keys, because Signature Plastics doesn't have the correct molds.
Has this been fixed yet?
Correct, as it stands now, Shifts will all be Row 3 profile, as before. When and if Signature Plastics is willing to correct this glaring oversight on their part, we would love to have the correct Row 4 profile Shifts included. If they become available after the group buy ends, I plan to do a "Shifts-only" GB for the correct profile caps.
There is nothing to be fixed!
The 2 Shift keys (2.25 and 2.75 units) have been made for Diatec and they chose row 3.
You can be lucky that there exist molds for 6.25 and 7 units space bars, funded through the Round 4 group buy, which made it possible to use sphericals on standard keyboards at all!
:o
I also hope that everybody appreciates that the participants of Round 5 funded the mold for the row 1 2 units key (Back Space).
:o
About the remaining keys:
I'm so sorry, but in Round 6 I will let them make a 1.5 units hat cap, so there will be no money for 1.25, 2.25 and 2.75 units molds in row 4.
:o
So, why not just take a bit more money per kit and let them make at least one new mold, so you can contribute to the tool pool, instread of just delaying Round 5 production for another month or two ...
:o
:lol:I am not an expert on SA keys, but if I am not mistaken there were always issues with the profile of the shift keys, because Signature Plastics doesn't have the correct molds.
Has this been fixed yet?
Correct, as it stands now, Shifts will all be Row 3 profile, as before. When and if Signature Plastics is willing to correct this glaring oversight on their part, we would love to have the correct Row 4 profile Shifts included. If they become available after the group buy ends, I plan to do a "Shifts-only" GB for the correct profile caps.
There is nothing to be fixed!
The 2 Shift keys (2.25 and 2.75 units) have been made for Diatec and they chose row 3.
You can be lucky that there exist molds for 6.25 and 7 units space bars, funded through the Round 4 group buy, which made it possible to use sphericals on standard keyboards at all!
:o
I also hope that everybody appreciates that the participants of Round 5 funded the mold for the row 1 2 units key (Back Space).
:o
About the remaining keys:
I'm so sorry, but in Round 6 I will let them make a 1.5 units hat cap, so there will be no money for 1.25, 2.25 and 2.75 units molds in row 4.
:o
So, why not just take a bit more money per kit and let them make at least one new mold, so you can contribute to the tool pool, instead of just delaying Round 5 production for another month or two ...
:o
Did I miss a post? I didn't see anyone posting this ...
:lol:I am not an expert on SA keys, but if I am not mistaken there were always issues with the profile of the shift keys, because Signature Plastics doesn't have the correct molds.
Has this been fixed yet?
Correct, as it stands now, Shifts will all be Row 3 profile, as before. When and if Signature Plastics is willing to correct this glaring oversight on their part, we would love to have the correct Row 4 profile Shifts included. If they become available after the group buy ends, I plan to do a "Shifts-only" GB for the correct profile caps.
There is nothing to be fixed!
The 2 Shift keys (2.25 and 2.75 units) have been made for Diatec and they chose row 3.
You can be lucky that there exist molds for 6.25 and 7 units space bars, funded through the Round 4 group buy, which made it possible to use sphericals on standard keyboards at all!
:o
I also hope that everybody appreciates that the participants of Round 5 funded the mold for the row 1 2 units key (Back Space).
:o
About the remaining keys:
I'm so sorry, but in Round 6 I will let them make a 1.5 units hat cap, so there will be no money for 1.25, 2.25 and 2.75 units molds in row 4.
:o
So, why not just take a bit more money per kit and let them make at least one new mold, so you can contribute to the tool pool, instead of just delaying Round 5 production for another month or two ...
:o
Did I miss a post? I didn't see anyone posting this ...
:lol:I am not an expert on SA keys, but if I am not mistaken there were always issues with the profile of the shift keys, because Signature Plastics doesn't have the correct molds.
Has this been fixed yet?
Correct, as it stands now, Shifts will all be Row 3 profile, as before. When and if Signature Plastics is willing to correct this glaring oversight on their part, we would love to have the correct Row 4 profile Shifts included. If they become available after the group buy ends, I plan to do a "Shifts-only" GB for the correct profile caps.
There is nothing to be fixed!
The 2 Shift keys (2.25 and 2.75 units) have been made for Diatec and they chose row 3.
You can be lucky that there exist molds for 6.25 and 7 units space bars, funded through the Round 4 group buy, which made it possible to use sphericals on standard keyboards at all!
:o
I also hope that everybody appreciates that the participants of Round 5 funded the mold for the row 1 2 units key (Back Space).
:o
About the remaining keys:
I'm so sorry, but in Round 6 I will let them make a 1.5 units hat cap, so there will be no money for 1.25, 2.25 and 2.75 units molds in row 4.
:o
So, why not just take a bit more money per kit and let them make at least one new mold, so you can contribute to the tool pool, instead of just delaying Round 5 production for another month or two ...
:o
Did I miss a post? I didn't see anyone posting this ...
That would be a quote fail.
Oh, and for those who have been asking, the F and J keys will be deep dish, not homing bumps.
No 7bit wrote his answer in the quote, as did you.
Answered inside the [ quote ][ /quote ]
Oh, and for those who have been asking, the F and J keys will be deep dish, not homing bumps.
I don't know what deep dish is but I've done some homeworks looking on the Internet. Is the picture below a good example of it?
(http://i.imgur.com/cFLlroA.jpg) (http://i.imgur.com/cFLlroA.jpg)
If you look at the F and J key, they seem deeper hence I conclude it was deep dish but I'm just guessing here.
assuming jd is ready this will be live some time between monday and wednesdayMe on Monday:
Show Image(http://i.imgur.com/idBynkt.png)
:)
Show Image(http://i.imgur.com/idBynkt.png)
:)
Just needs a dark "\|" key still.
Just needs a dark "\|" key still.
Heretic :p
... or change the Row 1 "ESC" to the lighter colour...
Gahh my bank account is gonna take a hit this January
Are there ridges of any sort on the F and J on SA profile keys?
Gahh my bank account is gonna take a hit this January
Are there ridges of any sort on the F and J on SA profile keys?
scoops/deep dish
(http://i.imgur.com/ksKmtMQ.png) (http://i.imgur.com/ksKmtMQ.png)
(http://i.imgur.com/ksKmtMQ.png) (http://i.imgur.com/ksKmtMQ.png)
So no Row 1 Esc key?
Hi to everyone,
I'm a Geekhack newcomer. Bought a Ducky Shine 3 TKL, loving her, and now I'm looking for gifting her a retro-keycap set. This one seems amazing (a C64-like would be even better :) , but I've got a couple of doubt:
1) will the kit fit the Ducky Shine 3 TKL (she's got a UK layout)? (I know it should fit, but as I said I'm a newcomer, and some keys like shift, spacebars, etc... seems to be non-trivial)
2) tried to figure out how much higher is the SA profile comparing it to stock keys, but I'm not sure about it. Something like 4-5 mm?
Thank you to everyone!
Show Image(http://i.imgur.com/ksKmtMQ.png)
Show Image(http://i.imgur.com/ksKmtMQ.png)
Hey BL, your mock ups definitely look more color-correct than JD's. Is it also safe to assume that yours will be closer to the final font & size? In other words, is there an end product for reference that would match it closely for a better idea?
Currently looking at the same set ngt posted, space cadet round 4.
sorry noob time: I get really confused, what does the "full contour" mean? It is different to the other SA sets? :(
Anyway would be very interested in this keyset in the future
Confirming it , Keys fill fit .Hi to everyone,
I'm a Geekhack newcomer. Bought a Ducky Shine 3 TKL, loving her, and now I'm looking for gifting her a retro-keycap set. This one seems amazing (a C64-like would be even better :) , but I've got a couple of doubt:
1) will the kit fit the Ducky Shine 3 TKL (she's got a UK layout)? (I know it should fit, but as I said I'm a newcomer, and some keys like shift, spacebars, etc... seems to be non-trivial)
2) tried to figure out how much higher is the SA profile comparing it to stock keys, but I'm not sure about it. Something like 4-5 mm?
Thank you to everyone!
I don't know about the profile but I'd say it should fit your keyboard. ISO keys are included in the GB so if you keyboard is, you'll have the keys needed. Someone correct me but I think Ducky keyboards have 6.25u spacebar and 1.25 modifers pretty much like the majority of keyboards hence you should be fine because it is the basic size of the keys in this kit.
I have this strange feeling in my pants.
I have this strange feeling in my pants.
Can I interest you in a "Depends"?
No second 2.25 shift for those using Fc660?
No second 2.25 shift for those using Fc660?
Typically after the group buy is done you can shoot Mellisa at SP an email to get one for a couple bucks.
No second 2.25 shift for those using Fc660?
Typically after the group buy is done you can shoot Mellisa at SP an email to get one for a couple bucks.
Great tip! Thank you very much buddy.
Show Image(http://i.imgur.com/Czzy0hU.png)
COMING SOON
No second 2.25 shift for those using Fc660?
Typically after the group buy is done you can shoot Mellisa at SP an email to get one for a couple bucks.
Great tip! Thank you very much buddy.
Obviously there is no guarantee they will have them but SP is usually very helpful they usually also have extra spacebars and top row blanks.
No second 2.25 shift for those using Fc660?
Typically after the group buy is done you can shoot Mellisa at SP an email to get one for a couple bucks.
Great tip! Thank you very much buddy.
Obviously there is no guarantee they will have them but SP is usually very helpful they usually also have extra spacebars and top row blanks.
No warranties then, any chance to add one to the set? I know, I am in the minorities' back yard.
It's Live on [CTRL]ALT!
It's Live on [CTRL]ALT!
I think they may still be working some bugs out I can't get my cart to load.
No second 2.25 shift for those using Fc660?
Typically after the group buy is done you can shoot Mellisa at SP an email to get one for a couple bucks.
Great tip! Thank you very much buddy.
Obviously there is no guarantee they will have them but SP is usually very helpful they usually also have extra spacebars and top row blanks.
No warranties then, any chance to add one to the set? I know, I am in the minorities' back yard.
add a note in your order
i always get a couple of sets that get broken up for missing keys
so we can just say that you happened to be missing that key at time of shipping wink wink
JD will this be a limited run?
JD will this be a limited run?
Nope. The more the merrier! Feel free to advertise the buy elsewhere, if you like. If we pass the break-even mark, and get something crazy like 300 orders, additional keys will be added to the set as extra goodies.
Should there be a link in the OP?
Should there be a link in the OP?
Yes. Yes, there should be.
FYI, the site goes down for me when I try and go to: https://ctrlalt.io/checkout/cart (https://ctrlalt.io/checkout/cart)
"500 Internal Server Error
If you are the administrator of this website, then please read this web application's log file and/or the web server's log file to find out what went wrong."
ctrlalt.io will be going down for just a moment to create a backup and deploy some fixes.
edit: were back. any carts that are still broken feel free to pm me.
ctrlalt.io will be going down for just a moment to create a backup and deploy some fixes.
edit: were back. any carts that are still broken feel free to pm me.
Sent you a pm. Had the same problem..
My order went through fine, thanks for being so quick to fix it cody!
ctrlalt.io will be going down for just a moment to create a backup and deploy some fixes.
edit: were back. any carts that are still broken feel free to pm me.
Sent you a pm. Had the same problem..
i think codys afk right now so may be a bit slow to reply
My order went through fine, thanks for being so quick to fix it cody!
No problem sir! Thanks for supporting us.ctrlalt.io will be going down for just a moment to create a backup and deploy some fixes.
edit: were back. any carts that are still broken feel free to pm me.
Sent you a pm. Had the same problem..
i think codys afk right now so may be a bit slow to reply
resolving the issue now.
It sounds like a dumb question but I'll go for it: Does the price include shipping?
It sounds like a dumb question but I'll go for it: Does the price include shipping?
According to the OP CONUS shipping is $13 and International is $20
It sounds like a dumb question but I'll go for it: Does the price include shipping?
According to the OP CONUS shipping is $13 and International is $20
Just tried to place an order at CTRL/ALT for these babies but it keeps asking me to select OPTIONS, what the hell?
Every time I select to buy 4 of them I get from above that it wants me to select options but haven't noticed any available on the page. Maybe doing something wrong but will come back tomorrow to try and place another order through and hoping it gets fixed.
Maybe I've already been banded from buying, yet again......... >:(
Hi asking just to clarify. (sorry if this was asked earlier)
Since GBs by Signature Plastic usually have their price reduced when more people order, I'm assuming that this won't be the case for this GB?
Hi asking just to clarify. (sorry if this was asked earlier)
Since GBs by Signature Plastic usually have their price reduced when more people order, I'm assuming that this won't be the case for this GB?
The way group buys work with [CTRL]ALT is that a kit is specified with certain keycaps included. A quote is requested from SP, and the price of the set is determined based on the estimate of how many sets will sell. If more sets are sold than expected, bonus keys will be included that may have been eliminated from the kit before the quote was requested, trying to save on costs.
That price is.... a bit too rich for my blood. Or at least for my wallet right now...
Can't afford to spend $160+ (120 base+20 shipping+15%-27% customs) on a set at the moment which will be used on a 60% board!
I don't want more caps if the set exceeds expected orders, I want less price. I may have to wait for Retro or Skull Squadron SA. But I really want this set! :(
That price is.... a bit too rich for my blood. Or at least for my wallet right now...
Can't afford to spend $160+ (120 base+20 shipping+15%-27% customs) on a set at the moment which will be used on a 60% board!
I don't want more caps if the set exceeds expected orders, I want less price. I may have to wait for Retro or Skull Squadron SA. But I really want this set! :(
we actually wanted to keep it under $100
but more keys got added etc and its a big set
what i can say though is yours would ship form the UK and you wouldnt have customs to pay on it
That price is.... a bit too rich for my blood. Or at least for my wallet right now...
Can't afford to spend $160+ (120 base+20 shipping+15%-27% customs) on a set at the moment which will be used on a 60% board!
I don't want more caps if the set exceeds expected orders, I want less price. I may have to wait for Retro or Skull Squadron SA. But I really want this set! :(
we actually wanted to keep it under $100
but more keys got added etc and its a big set
what i can say though is yours would ship form the UK and you wouldnt have customs to pay on it
That price is.... a bit too rich for my blood. Or at least for my wallet right now...
Can't afford to spend $160+ (120 base+20 shipping+15%-27% customs) on a set at the moment which will be used on a 60% board!
I don't want more caps if the set exceeds expected orders, I want less price. I may have to wait for Retro or Skull Squadron SA. But I really want this set! :(
we actually wanted to keep it under $100
but more keys got added etc and its a big set
what i can say though is yours would ship form the UK and you wouldnt have customs to pay on it
Do you mean that it would be shipped from the US to the UK and then someone ship it to Finland? Is there no import taxes in the UK?
That price is.... a bit too rich for my blood. Or at least for my wallet right now...
Can't afford to spend $160+ (120 base+20 shipping+15%-27% customs) on a set at the moment which will be used on a 60% board!
I don't want more caps if the set exceeds expected orders, I want less price. I may have to wait for Retro or Skull Squadron SA. But I really want this set! :(
we actually wanted to keep it under $100
but more keys got added etc and its a big set
what i can say though is yours would ship form the UK and you wouldnt have customs to pay on it
Do you mean that it would be shipped from the US to the UK and then someone ship it to Finland? Is there no import taxes in the UK?
That price is.... a bit too rich for my blood. Or at least for my wallet right now...
Can't afford to spend $160+ (120 base+20 shipping+15%-27% customs) on a set at the moment which will be used on a 60% board!
I don't want more caps if the set exceeds expected orders, I want less price. I may have to wait for Retro or Skull Squadron SA. But I really want this set! :(
we actually wanted to keep it under $100
but more keys got added etc and its a big set
what i can say though is yours would ship form the UK and you wouldnt have customs to pay on it
Do you mean that it would be shipped from the US to the UK and then someone ship it to Finland? Is there no import taxes in the UK?
Correct. The $20 international shipping is cheaper than having the set shipped directly to you from the US, while it also includes a tiny share of the import taxes that must be paid to ship all the international orders from the US to the UK.
And I know $120 seems like a lot. But just look at how complete the set is. You don't have to buy a separate pack for every use case, like a numpad kit, 60% kit, or tsangan kit. This covers all those. You would likely spend more, on average, for a "cheaper" set bought through PMK.
FYI, the site goes down for me when I try and go to: https://ctrlalt.io/checkout/cart (https://ctrlalt.io/checkout/cart)
"500 Internal Server Error
If you are the administrator of this website, then please read this web application's log file and/or the web server's log file to find out what went wrong."
It is a known error they are working on it. So far that happens if you had a previous item in your cart that is now out of stock.
FYI, the site goes down for me when I try and go to: https://ctrlalt.io/checkout/cart (https://ctrlalt.io/checkout/cart)
"500 Internal Server Error
If you are the administrator of this website, then please read this web application's log file and/or the web server's log file to find out what went wrong."
It is a known error they are working on it. So far that happens if you had a previous item in your cart that is now out of stock.
I'm seeing some people have ordered, but I'm still getting a 500 error. I read on another post it has to do with items in your basket? I can't remove things as the cart give me an error page. Sorry for being impatient if this is still being worked on.
BunnyLake and jd, what great sales men haha.That price is.... a bit too rich for my blood. Or at least for my wallet right now...
Can't afford to spend $160+ (120 base+20 shipping+15%-27% customs) on a set at the moment which will be used on a 60% board!
I don't want more caps if the set exceeds expected orders, I want less price. I may have to wait for Retro or Skull Squadron SA. But I really want this set! :(
we actually wanted to keep it under $100
but more keys got added etc and its a big set
what i can say though is yours would ship form the UK and you wouldnt have customs to pay on it
Do you mean that it would be shipped from the US to the UK and then someone ship it to Finland? Is there no import taxes in the UK?
Correct. The $20 international shipping is cheaper than having the set shipped directly to you from the US, while it also includes a tiny share of the import taxes that must be paid to ship all the international orders from the US to the UK.
And I know $120 seems like a lot. But just look at how complete the set is. You don't have to buy a separate pack for every use case, like a numpad kit, 60% kit, or tsangan kit. This covers all those. You would likely spend more, on average, for a "cheaper" set bought through PMK.
And I'd like to add that it keeps the resale value high, since it can be used on any semi-standard keyboard and the buyer won't be reluctant to buy some obscure extra pack you bought to support your oddball keyboard.
Oh and.... ORDERED! :D
]Yes, you heard that right... All owners of the JD40 (and upcoming JD45) keyboards, now hear this! THIS SET IS FULLY COMPATIBLE WITH THE JD40/45 KEYBOARDS. If you have been looking for a set to adorn your JD40, look no further!![/b]any more news about the JD45? :D
]Yes, you heard that right... All owners of the JD40 (and upcoming JD45) keyboards, now hear this! THIS SET IS FULLY COMPATIBLE WITH THE JD40/45 KEYBOARDS. If you have been looking for a set to adorn your JD40, look no further!![/b]any more news about the JD45? :D
Wow are you paying the fees on your behalf? Or did you include them in everyone's shipping fees?That price is.... a bit too rich for my blood. Or at least for my wallet right now...
Can't afford to spend $160+ (120 base+20 shipping+15%-27% customs) on a set at the moment which will be used on a 60% board!
I don't want more caps if the set exceeds expected orders, I want less price. I may have to wait for Retro or Skull Squadron SA. But I really want this set! :(
we actually wanted to keep it under $100
but more keys got added etc and its a big set
what i can say though is yours would ship form the UK and you wouldnt have customs to pay on it
Do you mean that it would be shipped from the US to the UK and then someone ship it to Finland? Is there no import taxes in the UK?
i cover any duty on the way in to the UK, and then yeah i ship the uk/eu and a few other bits
Alright I guess you answered my last post to BunnyLake.That price is.... a bit too rich for my blood. Or at least for my wallet right now...
Can't afford to spend $160+ (120 base+20 shipping+15%-27% customs) on a set at the moment which will be used on a 60% board!
I don't want more caps if the set exceeds expected orders, I want less price. I may have to wait for Retro or Skull Squadron SA. But I really want this set! :(
we actually wanted to keep it under $100
but more keys got added etc and its a big set
what i can say though is yours would ship form the UK and you wouldnt have customs to pay on it
Do you mean that it would be shipped from the US to the UK and then someone ship it to Finland? Is there no import taxes in the UK?
Correct. The $20 international shipping is cheaper than having the set shipped directly to you from the US, while it also includes a tiny share of the import taxes that must be paid to ship all the international orders from the US to the UK.
And I know $120 seems like a lot. But just look at how complete the set is. You don't have to buy a separate pack for every use case, like a numpad kit, 60% kit, or tsangan kit. This covers all those. You would likely spend more, on average, for a "cheaper" set bought through PMK.
Regarding to the price of the GB, I think it depends on what you need, doesn't it? If you just need normal modifiers and normal alpha it might be cheaper than the current price. However if you need ISO, tsangan, numpad and so on then it is worth. As there is only one kit so it is easier to redistribute the price on all the purchases instead of just a few. Am I right?
Thanks, NotActually_Relevent, whoever you are. :)MoreShow Image(http://i.imgur.com/iEXdT31.png)Regarding to the price of the GB, I think it depends on what you need, doesn't it? If you just need normal modifiers and normal alpha it might be cheaper than the current price. However if you need ISO, tsangan, numpad and so on then it is worth. As there is only one kit so it is easier to redistribute the price on all the purchases instead of just a few. Am I right?
Yes, it's a philosophy we stand by. It's about the ethos of a group buy, helping each other toward a common goal of saving on costs, while making something possible for the group which wouldn't have been possible individually. I may write up a blog post about it for [CTRL]ALT.
Cool! Looking awesome! :D]Yes, you heard that right... All owners of the JD40 (and upcoming JD45) keyboards, now hear this! THIS SET IS FULLY COMPATIBLE WITH THE JD40/45 KEYBOARDS. If you have been looking for a set to adorn your JD40, look no further!![/b]any more news about the JD45? :D
Actually, the firmware is almost ready, and prototypes will ship to beta testers very soon. After a bit of testing, you'll likely see a group buy for them.
https://geekhack.org/index.php?topic=62641.0
You can follow me on Twitter for updates @CarpeKeyboards http://twitter.carpekeyboards.com
Great set and well done for the bundle!
I'll pass because of alphas font size being too huge for me but again very nice design.
If I may suggest (maybe for futur sets) adding the following caps (following 3-12343).
For ISO to US Qwerty ISO conversion
\ at R3
Planck + KBT Pure Pro support
another SHIFTx1 at R4
CTRLx1 at R3
DELx1 at R1
BACKSPACEx1 at R1
2x FNx1 at R3
ENTERx1 at R4
For other OSes support
Replace WIN with a generic term, like SYSTEM or SUPER.
Ok you already have CMD and SUPER keys but changing the label of the WIN keys allow the use of R3 x1 keys on some keyboards.
Another alternative is to add 2x CMDx1 at R3 and 2x SUPERx1 at R3 for Pure Pro, Planck and others support.
Congrats for the set ;)
Unfortunately, it wouldn't have been possible to include all of those keys, just due to the sheer size to which the kit would grow, and the associated increase in cost.
I will address a few points:
* Planck keyboard support - the Planck is a 40% matrix design. VERY few people enjoy using a matrix keyboard. So to add support for a keyboard with so few users would unnecessarily add costs for the OVERWHELMING majority of purchasers, while benefiting literally only a handful of users, who may or may not purchase the set. GBs are about economies of scale.
* KBT Pure Pro - a very unfortunate keyboard design. As someone who designs and builds keyboards myself, I can tell you without hesitation that this is one of the worst keyboard designs I've ever encountered. If you purchased the Pure Pro, it's my opinion that the folks at Vortex duped you into buying their terrible product, which they dubbed with the "Pure" moniker in order to try and capitalize on a very good previous design. Marketing bait and switch, as it were.
* Other OS support - I did include 1.25-unit keys with SUPER and CMD labels, which covers the vast majority of users. Very few users will need a 1-unit OS key. Also, in the future, I plan on including an OS-agnostic symbol, which will further reduce the size of the kit, by eliminating the WIN, SUPER, and CMD keys altogether. More info on that topic here: https://geekhack.org/index.php?topic=67638.0
I've configured my Nintype iOS keyboard with the same colour way in celebration of this release.Show Image(http://i.imgur.com/xqAFlhx.jpg)
Am I a geek?
If you purchased the Pure Pro, it's my opinion that the folks at Vortex duped you into buying their terrible product, which they dubbed with the "Pure" moniker in order to try and capitalize on a very good previous design.
If you purchased the Pure Pro, it's my opinion that the folks at Vortex duped you into buying their terrible product, which they dubbed with the "Pure" moniker in order to try and capitalize on a very good previous design.
On the Pure, the good design was compromised by having CTRL-ALT-DEL short-cutted as FN+Left Shift. That was pants-on-head retarded. Don't get the key-press order wrong when doing shift-cursoring or you'll bring up the lock screen on Windows.
Finally remembered to buy this set! :D This should be a good one. :thumb:
If you purchased the Pure Pro, it's my opinion that the folks at Vortex duped you into buying their terrible product, which they dubbed with the "Pure" moniker in order to try and capitalize on a very good previous design.
On the Pure, the good design was compromised by having CTRL-ALT-DEL short-cutted as FN+Left Shift. That was pants-on-head retarded. Don't get the key-press order wrong when doing shift-cursoring or you'll bring up the lock screen on Windows.
@JDcarpe Being a newbie I hadn't made the relation with you and the JD40, I now realize how possibly clumsy my previous posts were and hope I didn't worry or hurt you. I could have say the JD40 as well and there was not intention to play some kind of trick. The JD45 looks great!
No worries! Order more Hack'd By Geeks, everyone!!
:D
No worries! Order more Hack'd By Geeks, everyone!!
:D
Because I do whatever JD tells me to do, my order has been placed. ;D
No worries! Order more Hack'd By Geeks, everyone!!
:D
Because I do whatever JD tells me to do, my order has been placed. ;D
Thanks guys. Trying to inch my way back. Slowly but surely. :))
No worries! Order more Hack'd By Geeks, everyone!!
:D
Because I do whatever JD tells me to do, my order has been placed. ;D
A must buy for starting off 2015! It sure is a beautiful set.
I payed through PP, so hopefully it gets updated on the CtrlAlt website soon.
Could someone post a picture of the caps on a board?
Could someone post a picture of the caps on a board?
Could someone post a picture of the caps on a board?
:))
Could someone post a picture of the caps on a board?
:))
YES everyone wants to see them already installed into their favourite keyboard as soon as possible. If only JD had that power to illuminate our eyes with their existence, then he'll be the first one to do so here on Geekhack.
I don't know of one off the top of my head, but is there an existing SA keyset with the same or similar row profiles? A picture of that + some imagination might help Geroximo.
sir, it is not matte at all, although it said to be semi matte.I don't know of one off the top of my head, but is there an existing SA keyset with the same or similar row profiles? A picture of that + some imagination might help Geroximo.
PuLSE has the same row profiles, the same family of keycaps, the same semi matte finish.
sir, it is not matte at all, although it said to be semi matte.I don't know of one off the top of my head, but is there an existing SA keyset with the same or similar row profiles? A picture of that + some imagination might help Geroximo.
PuLSE has the same row profiles, the same family of keycaps, the same semi matte finish.
This choice of profile angles is simply amazing to type on. By far my favourite profile. Here are some pics of my PuLSE set, only 60% so you can't see how the top row looks, but Data's post a few above mine has pics of a TKL with them on: https://geekhack.org/index.php?topic=62554.msg1597372#msg1597372 (https://geekhack.org/index.php?topic=62554.msg1597372#msg1597372)
They'll be replaced with these when they arrive :D
I'm still using Penumbra on my other 60%. They're Row 2, 3, 3, 3, 4: https://geekhack.org/index.php?topic=51026.msg1520889#msg1520889 (https://geekhack.org/index.php?topic=51026.msg1520889#msg1520889)
They are all "semi-matte", which is actually quite smooth, but not shiny. They shine up fairly quickly with use, though, but don't seem to feel as "greasy" as the matte DCS sets when they do.
Does someone have a comparison of this profile with original Cherry sets? SA Caps are much taller of course, but I would like to see how the profiles compare in between.
Does someone have a comparison of this profile with original Cherry sets? SA Caps are much taller of course, but I would like to see how the profiles compare in between.
I don't, but they will feel much different. Besides being taller, SA profile have spherical tops, while Cherry/GMK have cylindrical tops.
jdcarpe,I'm actually wondering if there will be another small GB for Row 4 shift in the future.
I noticed, by studying the info-graphic in the OP, the regular 2.25x and 2.75x shift keys are Row 3, but the 1.75x shift and the 1x FN key that goes with it are Row 4. This is what that would result in, an obvious mismatch:
http://www.keyboard-layout-editor.com/#/layouts/41656e509c6852c163299e31aa7252fb
Is that really how they are?
--Shawn
Does someone have a comparison of this profile with original Cherry sets? SA Caps are much taller of course, but I would like to see how the profiles compare in between.
I don't, but they will feel much different. Besides being taller, SA profile have spherical tops, while Cherry/GMK have cylindrical tops.
Please forgive the large file size, posting directly from my phone (with the keyboard in the picture actually).
Here is GMK Dolch and Pulse SA on the same board so you can see the height and angle differences:
(Attachment Link)
Good tip, but I still would like to know if the profile of their tops are close or how different their top curves are.
jdcarpe,I'm actually wondering if there will be another small GB for Row 4 shift in the future.
I noticed, by studying the info-graphic in the OP, the regular 2.25x and 2.75x shift keys are Row 3, but the 1.75x shift and the 1x FN key that goes with it are Row 4. This is what that would result in, an obvious mismatch:
http://www.keyboard-layout-editor.com/#/layouts/41656e509c6852c163299e31aa7252fb
Is that really how they are?
--Shawn
jdcarpe,
I noticed, by studying the info-graphic in the OP, the regular 2.25x and 2.75x shift keys are Row 3, but the 1.75x shift and the 1x FN key that goes with it are Row 4. This is what that would result in, an obvious mismatch:
http://www.keyboard-layout-editor.com/#/layouts/41656e509c6852c163299e31aa7252fb
Is that really how they are?
--Shawn
I thought there simply wasn't a row 4 shift in the sizes skipped?jdcarpe,I'm actually wondering if there will be another small GB for Row 4 shift in the future.
I noticed, by studying the info-graphic in the OP, the regular 2.25x and 2.75x shift keys are Row 3, but the 1.75x shift and the 1x FN key that goes with it are Row 4. This is what that would result in, an obvious mismatch:
http://www.keyboard-layout-editor.com/#/layouts/41656e509c6852c163299e31aa7252fb
Is that really how they are?
--Shawn
I think it was stated in this thread that once SP gets hold of a mold with the right stem positions for the Row 4 shift, there will be a mini group buy for it. AFAIK the current mold of the Row 4 has the wrong stem placements.
Just a friendly reminder...
I know some of you probably got paid today, so it's time to order up!
:D
Just a friendly reminder...
I know some of you probably got paid today, so it's time to order up!
:D
ill send a keychain out tomorrow to the next paid orderShow Image(http://i.imgur.com/tK4ijjA.jpg)
Just a friendly reminder...
I know some of you probably got paid today, so it's time to order up!
:D
ill send a keychain out tomorrow to the next paid orderShow Image(http://i.imgur.com/tK4ijjA.jpg)
(http://i.imgur.com/Z3usS5G.jpg) (http://i.imgur.com/Z3usS5G.jpg)
Show Image(http://i.imgur.com/Z3usS5G.jpg)
Show Image(http://i.imgur.com/Z3usS5G.jpg)
Show Image(http://i.imgur.com/Z3usS5G.jpg)
Done. Are you happy now?
Another person is going to be out on the streets because of you.
Fsk off.
Love you. :-*
Show Image(http://i.imgur.com/Z3usS5G.jpg)
Done. Are you happy now?
Another person is going to be out on the streets because of you.
Fsk off.
Love you. :-*
lol you actually did it
well played sir
keychian will be heading to you tomorrow
You guys know you can't type with a keychain right?
You guys know you can't type with a keychain right?
You guys know you can't type with a keychain right?
You guys know you can't type with a keychain right?
-.-- . ... / -.-- --- ..- / -.-. .- -.
pls don't make me explain this...
Hm, ctrlalt.io has been unreachable ( = unpingable) for atleast 8 hours, whats up with your hoster?
Hm, ctrlalt.io has been unreachable ( = unpingable) for atleast 8 hours, whats up with your hoster?
itll be sorted soon, sorry for the delay just waiting for cody to get up
No kits, no muss, no fuss. Alphas, Mods, Numpad, Tsangan, ISO, and JD40/45 all included. One kit to rule them all. :)
No kits, no muss, no fuss. Alphas, Mods, Numpad, Tsangan, ISO, and JD40/45 all included. One kit to rule them all. :)
But what about my ErgoDox? :-P
No kits, no muss, no fuss. Alphas, Mods, Numpad, Tsangan, ISO, and JD40/45 all included. One kit to rule them all. :)
But what about my ErgoDox? :-P
I've always stated that people are free to put up IC/GB on PMK for whatever kits in the same colorway, that they think can make MOQ, which I haven't included in the set. It's nothing personal, I just made a kit to cover what 80% of people need, because the other 20% would price an already expensive set out of anyone's reach.
Oh I know, I'm just pulling your chain. In reality this kit would cover most of what I need for my dox the downside being I wish I could easily just get blanks that match for the other keys. At least from what I can tell we can't just order blanks in a specific color/profile anywhere.
SP has pulled the overstock section from their site. I know they sell single keys in PBT DSA in a small selection of colours, they do not appear to do the same with other profiles or plastics.
No harm in asking though, they may be able to accommodate.
Sorry Bunny, I'd totally get one of these sets if I wasn't so low on cash currently =( I did order the Kyperfuse tho !!! :thumb:
Sorry Bunny, I'd totally get one of these sets if I wasn't so low on cash currently =( I did order the Kyperfuse tho !!! :thumb:
Cash can always be acquired but missing out on this version of SA Profiled Brilliance will harm your devotion to keyboards. I know we concentrate on GMK which is admirable but this colour-way devised by CTRL/ALT, is unique and I am a fervent addict to SP's SA profile, above all others they create at their factory. Yes indeed, US of A is represented in "Hack'd by Geeks" key-set and if you really want to be known as a true Geekhack Addict, then you need these babies.
As I mentioned before they won't be re-done ever again so now's the time to start shaking some trees for extra cash and convincing your girl friends to front up with some extra money here. Do what ever you need to including submitting to any adverse positions for your master because in the end you shall own a very unique key-set that NOT everyone shall have the privilege to own.
I'm buying this key-set because it stirs something from my long distant past, a desire to remember what it's like to use older keyboards and their unique layouts. Also remembering my downloads of first pron pics of Vanessa Del Rio and Traci Lords which made life at school just that little more tolerable, yes I was a PC addict way back then simply because you could build a pc from scratch and bring it to life. You could affirm your own existence when your face was covered in pimples and looking like some giant ape escaped from a local zoo, it was really that bad for me back then.
Memories from the past wasn't all good or decent but it helps to build what you are today and I hope that everyone climbs onboard this Hack'd Geek-Set and populate some keyboards because it will look truly amazing :thumb: .
Sorry Bunny, I'd totally get one of these sets if I wasn't so low on cash currently =( I did order the Kyperfuse tho !!! :thumb:
Cash can always be acquired but missing out on this version of SA Profiled Brilliance will harm your devotion to keyboards. I know we concentrate on GMK which is admirable but this colour-way devised by CTRL/ALT, is unique and I am a fervent addict to SP's SA profile, above all others they create at their factory. Yes indeed, US of A is represented in "Hack'd by Geeks" key-set and if you really want to be known as a true Geekhack Addict, then you need these babies.
As I mentioned before they won't be re-done ever again so now's the time to start shaking some trees for extra cash and convincing your girl friends to front up with some extra money here. Do what ever you need to including submitting to any adverse positions for your master because in the end you shall own a very unique key-set that NOT everyone shall have the privilege to own.
I'm buying this key-set because it stirs something from my long distant past, a desire to remember what it's like to use older keyboards and their unique layouts. Also remembering my downloads of first pron pics of Vanessa Del Rio and Traci Lords which made life at school just that little more tolerable, yes I was a PC addict way back then simply because you could build a pc from scratch and bring it to life. You could affirm your own existence when your face was covered in pimples and looking like some giant ape escaped from a local zoo, it was really that bad for me back then.
Memories from the past wasn't all good or decent but it helps to build what you are today and I hope that everyone climbs onboard this Hack'd Geek-Set and populate some keyboards because it will look truly amazing :thumb: .
I was struggling with myself if I should get this or not. Actually I still am struggling, because it would fit my grey QFR case perfectly. But sometimes you have to think rationally.
If he cannot afford it, then don't talk him into overspending his money. There are people for which 133$ is a ****load of money. And they have to spend their money wisely. Pls don't talk them into things they might regret.
EDIT: especially with hyperfuse running currently ... **** ... cannot ... decide .... brain .... hurts
I understand that sometimes we don't always have the money at the right time to get in on everything we want. But, as Elrick said above, be prepared to live with the regret that follows. As a personal example, I steered MiTo into making PuLSE a very nice contoured SA profile group buy keycap set. I knew I had to buy it, after I had gone through the effort to ensure it would be a great set. So I ordered a set. At the time, the Green Tea set was running concurrently, which I really wanted as well. However, I was strapped for cash, and couldn't afford both. When the sets started shipping, I immediately regretted not buying into the Green Tea GB. I was able to pick up a base set and mods later, but I am still searching for a SmallFry kit for my JD40. I should have sold something to pay for the Green Tea set when it was available.
These will likely never be made again once this GB ends. This set seems expensive, because everything is in one kit. But look back at your previous GB purchases through PMK, and you will probably find that you spent as much or more on a single GB purchase, after you ordered all the child kits you needed.
So, my advice is don't miss out on this, if you have even a passing interest. Contoured SA is very nice for typing. SA keycaps are THICK and beautiful. This set was well thought out by BunnyLake and me to be one of the best sets ever made, in a colorway that both reminds you of the "old" days of computer terminals, and is representative of Geekhack forum colors.
I was struggling with myself if I should get this or not. Actually I still am struggling, because it would fit my grey QFR case perfectly. But sometimes you have to think rationally.
If he cannot afford it, then don't talk him into overspending his money. There are people for which 133$ is a ****load of money. And they have to spend their money wisely. Pls don't talk them into things they might regret.
Wait, you sold a Valiant to get more key-caps? I admire your dedication, but I think that went a bit far. :))
Not sure if I want to wait that long for these to arrive ..
Not sure if I want to wait that long for these to arrive ..
Okay so where are you going? Curious to know because I'm an old nut-bag and I've got nowhere to go yet I'm happy to wait for these babies to arrive at my address here in Convict Town.
If I can wait, what makes you so special requiring immediate delivery of these items?
Not sure if I want to wait that long for these to arrive ..
Okay so where are you going? Curious to know because I'm an old nut-bag and I've got nowhere to go yet I'm happy to wait for these babies to arrive at my address here in Convict Town.
If I can wait, what makes you so special requiring immediate delivery of these items?
Maybe ask for separate shipping of the 2 sets. Sure, I could wait, but since I basically decided to get these as my first "group buy" keyset, I'd like to put them on my board as fast as possible. During confirmation of the order, I browsed through the webshop one last time to see if I could find anything else worthwhile, and I stumbled upon the Hyper Fuse set :)
Not sure if I want to wait that long for these to arrive ..
Okay so where are you going? Curious to know because I'm an old nut-bag and I've got nowhere to go yet I'm happy to wait for these babies to arrive at my address here in Convict Town.
If I can wait, what makes you so special requiring immediate delivery of these items?
I figured I might ask for separate shipping of the 2 sets.
Sure, I could wait, but since I basically decided to get these as my first "group buy" keyset, I'd like to put them on my board as fast as possible. During confirmation of the order, I browsed through the webshop one last time to see if I could find anything else worthwhile, and I stumbled upon the Hyper Fuse set :)
By the way, why make such a reference like I'm implying I'm special in any way?
Not sure if I want to wait that long for these to arrive ..
Okay so where are you going? Curious to know because I'm an old nut-bag and I've got nowhere to go yet I'm happy to wait for these babies to arrive at my address here in Convict Town.
If I can wait, what makes you so special requiring immediate delivery of these items?
I figured I might ask for separate shipping of the 2 sets.
Sure, I could wait, but since I basically decided to get these as my first "group buy" keyset, I'd like to put them on my board as fast as possible. During confirmation of the order, I browsed through the webshop one last time to see if I could find anything else worthwhile, and I stumbled upon the Hyper Fuse set :)
By the way, why make such a reference like I'm implying I'm special in any way?
although hyperfuse has a longer buy period, traditionally gmk are very fast at production, so they should arrive at a pretty similar time
but if one arrives first, and you want it asap, we can sort that at the time
Not sure if I want to wait that long for these to arrive ..
Okay so where are you going? Curious to know because I'm an old nut-bag and I've got nowhere to go yet I'm happy to wait for these babies to arrive at my address here in Convict Town.
If I can wait, what makes you so special requiring immediate delivery of these items?
I figured I might ask for separate shipping of the 2 sets.
Sure, I could wait, but since I basically decided to get these as my first "group buy" keyset, I'd like to put them on my board as fast as possible. During confirmation of the order, I browsed through the webshop one last time to see if I could find anything else worthwhile, and I stumbled upon the Hyper Fuse set :)
By the way, why make such a reference like I'm implying I'm special in any way?
although hyperfuse has a longer buy period, traditionally gmk are very fast at production, so they should arrive at a pretty similar time
but if one arrives first, and you want it asap, we can sort that at the time
German efficiency, now only if we could get shipping companies in the US to work the same way.
German efficiency, now only if we could get shipping companies in the US to work the same way.
At least you guys actually make something on your home soil compared to my country, that makes absolutely nothing, it's so embarrassing telling someone where I'm from. Usually lie about that so as to avoid being shamed and ridiculed by everyone from other advanced nations.
Be proud you make anything and have something to ship worldwide, compared to us lot here in pathetic Convict Town :-[ .
There's one guy (on GH) does keyboard repairs in Australia.
I thought that was a pretty big thing when it happened :o
I can tell you right now that Australia is in a much better economical position than the Philippines.There's one guy (on GH) does keyboard repairs in Australia.
I thought that was a pretty big thing when it happened :o
Rowdy, he's doing it as a crafts-person not as a certified Manufacturer that is hiring a full time staff and offering superannuation to boot. There are loads of people here on Geekhack offering their services as well but they definitely are not "Corporations" paying appropriate taxes and whatnot.
Trust me our nation fell down the sewer pipe a long time ago maybe around the late 1980's when every successive government elected thought is was fine to destroy any manufacturing on home soil. It's still happening even with the current moron in Canberra, he's so pathetic it's almost some sort of a bad comedy script written by some choady-licking, doochbag >:( .
Sorry to rant but that's what Elrick stands for, the bagman of bugleland 8) .
Need moar orders. Hurry people haha
Need moar orders. Hurry people haha
I keep thinking if I bought a second set I could have them on my jd40 AND my full size at the same time.
Depending on how this Bro Caps sale goes for me, I may have the funds to get in on this sweet set.
Anyone happen to know whether the studs on the spacebar will line up with goofy stabilizer spacing on a Leopold FC660M? Having that issue currently with the Eve set I ordered from SP recently. Thanks!
Anyone happen to know whether the studs on the spacebar will line up with goofy stabilizer spacing on a Leopold FC660M? Having that issue currently with the Eve set I ordered from SP recently. Thanks!
Need moar orders. Hurry people hahaI'm out of **** to sell for funding! Could I interest you in a kidney?
Need moar orders. Hurry people hahaI'm out of **** to sell for funding! Could I interest you in a kidney?
LOL my first job was at a Pizza Hut, and the drivers did make better money than the managers :))Need moar orders. Hurry people hahaI'm out of **** to sell for funding! Could I interest you in a kidney?
I hear you can make good tips delivering pizza. ;)
LOL my first job was at a Pizza Hut, and the drivers did make better money than the managers :))Need moar orders. Hurry people hahaI'm out of **** to sell for funding! Could I interest you in a kidney?
I hear you can make good tips delivering pizza. ;)
I'll just go sell my body on the corner, I can do that late at night once I get home from my day job...
That's the spirit! Elrick would be so proud. :D
If you need a little extra time to come up with the money, Bunny has been known once or twice to possibly stretch a deadline if you ask him nicely.
:o Elrick stop it, you are going to make me buy more than one set even if I have no funds LOL. I have to sell some items before I can buy one but I'm trying to rush it
I am waiting a bit on this one to see if I really want it. But after the holdup I have done in the Bro sale, I'll just buy it straight I think.
extremely excited to slap this on a novatouch
Same here. I've heard a lot of good things about Novatouch + SA
extremely excited to slap this on a novatouch
Yeah I have a Novatouch too and I bet it is going real good!extremely excited to slap this on a novatouch
Same here. I've heard a lot of good things about Novatouch + SA
Have you tried it already? I mean SA on NT.Same here. I've heard a lot of good things about Novatouch + SA
Don't forget when they arrive into your hot little hands, you have to apply some lube to help ease them into some tight holes ;D . Ahhhh the feeling is quite exquisite..........
extremely excited to slap this on a novatouchYeah I have a Novatouch too and I bet it is going real good!extremely excited to slap this on a novatouch
Same here. I've heard a lot of good things about Novatouch + SAHave you tried it already? I mean SA on NT.Same here. I've heard a lot of good things about Novatouch + SA
Don't forget when they arrive into your hot little hands, you have to apply some lube to help ease them into some tight holes ;D . Ahhhh the feeling is quite exquisite..........
I'm a bit sad because I heard Bro Caps won't fit on a NT ... I won 4 of them.
novatouch has round stems, mx bro caps have square stemsWell then, you just solved one of my issues with the Novatouch (especially since almost all my Bros are Topre!) :thumb:
that being said, i have about 1000 topre stems kicking around
so you can just put a topre stem on the nova wherever you want a bro cap
problem solved
Will it be possible to combine shipping with the Hyperfuse set? :D
I don't see how it solves my problem as all of my Bro Caps are MX hence they won't fit on a Topre stem, will they?extremely excited to slap this on a novatouchYeah I have a Novatouch too and I bet it is going real good!extremely excited to slap this on a novatouch
Same here. I've heard a lot of good things about Novatouch + SAHave you tried it already? I mean SA on NT.Same here. I've heard a lot of good things about Novatouch + SA
Don't forget when they arrive into your hot little hands, you have to apply some lube to help ease them into some tight holes ;D . Ahhhh the feeling is quite exquisite..........
I'm a bit sad because I heard Bro Caps won't fit on a NT ... I won 4 of them.
novatouch has round stems, mx bro caps have square stems
that being said, i have about 1000 topre stems kicking around
so you can just put a topre stem on the nova wherever you want a bro cap
problem solved
I don't see how it solves my problem as all of my Bro Caps are MX hence they won't fit on a Topre stem, will they?extremely excited to slap this on a novatouchYeah I have a Novatouch too and I bet it is going real good!extremely excited to slap this on a novatouch
Same here. I've heard a lot of good things about Novatouch + SAHave you tried it already? I mean SA on NT.Same here. I've heard a lot of good things about Novatouch + SA
Don't forget when they arrive into your hot little hands, you have to apply some lube to help ease them into some tight holes ;D . Ahhhh the feeling is quite exquisite..........
I'm a bit sad because I heard Bro Caps won't fit on a NT ... I won 4 of them.
novatouch has round stems, mx bro caps have square stems
that being said, i have about 1000 topre stems kicking around
so you can just put a topre stem on the nova wherever you want a bro cap
problem solved
A solution I thought of was to sand down the rectangular shape containing the shape so it will fit on the NT stem. I just feel bad about modifying Bro's awesome work.
I don't see how it solves my problem as all of my Bro Caps are MX hence they won't fit on a Topre stem, will they?extremely excited to slap this on a novatouchYeah I have a Novatouch too and I bet it is going real good!extremely excited to slap this on a novatouch
Same here. I've heard a lot of good things about Novatouch + SAHave you tried it already? I mean SA on NT.Same here. I've heard a lot of good things about Novatouch + SA
Don't forget when they arrive into your hot little hands, you have to apply some lube to help ease them into some tight holes ;D . Ahhhh the feeling is quite exquisite..........
I'm a bit sad because I heard Bro Caps won't fit on a NT ... I won 4 of them.
novatouch has round stems, mx bro caps have square stems
that being said, i have about 1000 topre stems kicking around
so you can just put a topre stem on the nova wherever you want a bro cap
problem solved
A solution I thought of was to sand down the rectangular shape containing the shape so it will fit on the NT stem. I just feel bad about modifying Bro's awesome work.
I was talking about my solution which was to sand down the rectangular shape to make it circular.I don't see how it solves my problem as all of my Bro Caps are MX hence they won't fit on a Topre stem, will they?extremely excited to slap this on a novatouchYeah I have a Novatouch too and I bet it is going real good!extremely excited to slap this on a novatouch
Same here. I've heard a lot of good things about Novatouch + SAHave you tried it already? I mean SA on NT.Same here. I've heard a lot of good things about Novatouch + SA
Don't forget when they arrive into your hot little hands, you have to apply some lube to help ease them into some tight holes ;D . Ahhhh the feeling is quite exquisite..........
I'm a bit sad because I heard Bro Caps won't fit on a NT ... I won 4 of them.
novatouch has round stems, mx bro caps have square stems
that being said, i have about 1000 topre stems kicking around
so you can just put a topre stem on the nova wherever you want a bro cap
problem solved
A solution I thought of was to sand down the rectangular shape containing the shape so it will fit on the NT stem. I just feel bad about modifying Bro's awesome work.
You wouldn't be modifying the bro cap at all, you will be modifying the board, you will replace the Novatouch MX compatible stem with a regular Topre stem that way you can use the brobot.
I don't see how it solves my problem as all of my Bro Caps are MX hence they won't fit on a Topre stem, will they?extremely excited to slap this on a novatouchYeah I have a Novatouch too and I bet it is going real good!extremely excited to slap this on a novatouch
Same here. I've heard a lot of good things about Novatouch + SAHave you tried it already? I mean SA on NT.Same here. I've heard a lot of good things about Novatouch + SA
Don't forget when they arrive into your hot little hands, you have to apply some lube to help ease them into some tight holes ;D . Ahhhh the feeling is quite exquisite..........
I'm a bit sad because I heard Bro Caps won't fit on a NT ... I won 4 of them.
novatouch has round stems, mx bro caps have square stems
that being said, i have about 1000 topre stems kicking around
so you can just put a topre stem on the nova wherever you want a bro cap
problem solved
A solution I thought of was to sand down the rectangular shape containing the shape so it will fit on the NT stem. I just feel bad about modifying Bro's awesome work.
yeah that isnt a particularly good solution, i think trading for a topre bro cap would be better
all that being said, im not a fan of the novatouch anyway
but if people want a bro cap on there as well as mx caps and a topre experience
that is the workaround
extremely excited to slap this on a novatouch
Same here. I've heard a lot of good things about Novatouch + SA
Have you tried it already? I mean SA on NT.
I've never tried any versions of SA so far but I think I'll start with the best one then!extremely excited to slap this on a novatouch
Same here. I've heard a lot of good things about Novatouch + SAHave you tried it already? I mean SA on NT.
I'm using Pulse on my Novatouch right now and it's real sexy. Feels really good. Contoured SA is far nicer than all-row-3 SA.
I've never tried any versions of SA so far but I think I'll start with the best one then!Show Image(https://s3.amazonaws.com/tapatalk-emoji/emoji6.png)
Indeed you haven't stopped talking about it . You'll have to wait a bit before trying it I'm afraid.I've never tried any versions of SA so far but I think I'll start with the best one then!Show Image(https://s3.amazonaws.com/tapatalk-emoji/emoji6.png)
This is Full Contoured so they are different from the all same profiled Nuclear's that I have in my possession. The Nuclear's were created to fit almost any keyboard available (aka the 1800 series), these babies will provide a beautiful slope to type on with the keys angled correctly for long sessions of typing (unfortunately not on an 1800) :'( .
These are my first purchase for 2015 hence my excitement is building for this set, plus my personal love for this colour-way knows no bounds 8) .
Will it be possible to combine shipping with the Hyperfuse set? :D
of course
Beautiful color combinations. But frustration in SA profile ...
sigh... such a beautiful set. I did promise myself I wouldn't buy keycaps till my assembled GH60 was in my hands. How long will orders for this GH be open for?Check the Ctrl alt website. It has a count down to when the gb ends. But it has about 9 days left.
Beautiful color combinations. But frustration in SA profile ...
SA profile best profile
NOT TRUE!!! What about GMK? Isn't Germany part of the United States? ^_^ :thumb:Beautiful color combinations. But frustration in SA profile ...
SA profile best profile
So true :thumb: :thumb: :thumb: :thumb: .
If you haven't tried it before now's the time to get some of these beauties and ignore any negative comments from jealous morons, who think they know something about key-cap profiles.
This one is the ONLY one worth considering at Signature Plastics hence heed JD's word on this, this is the BEST Profile currently produced in the United States 8) .
What texture will these keys have?
AFAIK SA profile has 3 options, glossy, semi-matte and matte.
What texture will these keys have?
AFAIK SA profile has 3 options, glossy, semi-matte and matte.
Semi matte
What texture will these keys have?
AFAIK SA profile has 3 options, glossy, semi-matte and matte.
Semi matte
but damn if this set wouldnt look 40% better in matte
Hey JD, when it says 7 days left... is the buy going to be open through the end of the day next friday, or does it close on Friday (the 13th?) I'm trying to get one more paycheck in before I purchase but I fully intend to get a set, so I want to make sure I don't miss it.MoreFriday the 13th, so spooky!Show Image(http://www.gamecrate.com/wp-content/uploads/2015/01/friday-the-13th-5076e453d80e1-1.jpg)
Hey JD, when it says 7 days left... is the buy going to be open through the end of the day next friday, or does it close on Friday (the 13th?) I'm trying to get one more paycheck in before I purchase but I fully intend to get a set, so I want to make sure I don't miss it.MoreFriday the 13th, so spooky!Show Image(http://www.gamecrate.com/wp-content/uploads/2015/01/friday-the-13th-5076e453d80e1-1.jpg)
I ordered one set finally! ;)
I'm already figuring out how it will look with my 4 blackout bros and this set. I tell you: AWESOME!I ordered one set finally! ;)
Finally decided to join the Geek Brigade, well you're in good company here with some of the finest examples of ultra geekdom to ever own any type of keyboards :thumb: .
Something I think I have misunderstood. Does "contoured" reference this (http://deskthority.net/wiki/File:KeyProfile.gif) or does it reference the fact that the top of the cap is deeper than his contour?
Something I think I have misunderstood. Does "contoured" reference this (http://deskthority.net/wiki/File:KeyProfile.gif) or does it reference the fact that the top of the cap is deeper than his contour?
The first one.
Beautiful color combinations. But frustration in SA profile ...
SA profile best profile
Welcome to the club!Beautiful color combinations. But frustration in SA profile ...
SA profile best profile
This is exactly why I jumped in. I've never seen, nor typed on a full SA profile. ;D ;D
JUST A FEW DAYS REMAINING TO ORDER!! DON'T MISS OUT ON THIS UNIQUE KEY SET!!
:D
JUST A FEW DAYS REMAINING TO ORDER!! DON'T MISS OUT ON THIS UNIQUE KEY SET!!
:D
one more!!!
And don't forget people if you have more than one keyboard why not buy 2 sets!! So they both can have these awesome caps.
JUST A FEW DAYS REMAINING TO ORDER!! DON'T MISS OUT ON THIS UNIQUE KEY SET!!
:D
one more!!!
And don't forget people if you have more than one keyboard why not buy 2 sets!! So they both can have these awesome caps.
i heard some people have 3 + keyboards, why not get matching sets hehe
I couldn't pass it up, I'm in.
Thanks for the welcome!
I'm looking forward to this set. It'll be my first time trying SA and I really like the color scheme.
I'm already figuring out how it will look with my 4 blackout bros and this set. I tell you: AWESOME!I ordered one set finally! ;)
Finally decided to join the Geek Brigade, well you're in good company here with some of the finest examples of ultra geekdom to ever own any type of keyboards :thumb: .
I'm already figuring out how it will look with my 4 blackout bros and this set. I tell you: AWESOME!I ordered one set finally! ;)
Finally decided to join the Geek Brigade, well you're in good company here with some of the finest examples of ultra geekdom to ever own any type of keyboards :thumb: .
I just got an ashen, volcanic, hi c, steel, and ooc orange in anticipation of keeping them with this set
I'm already figuring out how it will look with my 4 blackout bros and this set. I tell you: AWESOME!I ordered one set finally! ;)
Finally decided to join the Geek Brigade, well you're in good company here with some of the finest examples of ultra geekdom to ever own any type of keyboards :thumb: .
I just got an ashen, volcanic, hi c, steel, and ooc orange in anticipation of keeping them with this set
Well in that case I'll be looking forward to see your keyboard pictures then. ;)
I just couldn't resist the full contour SA. Ordered.
Last few days, folks. You don't want to miss out on this one!
This set is going to be somewhat limited, looking at the numbers so far. If you want to pick up an extra, you could always sell it later, if you don't need it. No doubt these will be in high demand in the Classifieds after the buy is over.
Last few days, folks. You don't want to miss out on this one!
This set is going to be somewhat limited, looking at the numbers so far. If you want to pick up an extra, you could always sell it later, if you don't need it. No doubt these will be in high demand in the Classifieds after the buy is over.
The set is facing times of fierce competition.
I have never been so excited for a set before.
I'm almost tempted to buy another Novatouch and an extra set because that's how good Topre feels with SA...
Friday it's happening!Last few days, folks. You don't want to miss out on this one!
This set is going to be somewhat limited, looking at the numbers so far. If you want to pick up an extra, you could always sell it later, if you don't need it. No doubt these will be in high demand in the Classifieds after the buy is over.
The set is facing times of fierce competition.
That combined shipping, though...
Friday it's happening!Last few days, folks. You don't want to miss out on this one!
This set is going to be somewhat limited, looking at the numbers so far. If you want to pick up an extra, you could always sell it later, if you don't need it. No doubt these will be in high demand in the Classifieds after the buy is over.
The set is facing times of fierce competition.
That combined shipping, though...
If we don't combine shipping, will Hack'd by Geeks ship sooner than GMKHF? I'm torn between saving some money by combining with Hyperfuse or getting my hands on Hack'd by Geeks faster...
I have never been so excited for a set before.
I'm almost tempted to buy another Novatouch and an extra set because that's how good Topre feels with SA...
man ive heard such good things about SA on topre, gahhhh, tough call, although i really shouldnt be buying keyboards again right now haha
i think they will end up getting made about the same time, gmk tend to be faster than SP, although ill have a better idea once the orders are placed, you can always combine, and then if one arrives earlier than the other and you want it sooner, just pay the extra shipping thenBrilliant, you are making this too easy :D
I have never been so excited for a set before.
I'm almost tempted to buy another Novatouch and an extra set because that's how good Topre feels with SA...
man ive heard such good things about SA on topre, gahhhh, tough call, although i really shouldnt be buying keyboards again right now haha
I've never gone for a GB before but I'm definitely interested in this one. I'm just wondering if anyone knows from experience how long SP tends to take with production runs, because I don't have a clue about how long the wait period is
I've never gone for a GB before but I'm definitely interested in this one. I'm just wondering if anyone knows from experience how long SP tends to take with production runs, because I don't have a clue about how long the wait period is
I have never been so excited for a set before.
I'm almost tempted to buy another Novatouch and an extra set because that's how good Topre feels with SA...
man ive heard such good things about SA on topre, gahhhh, tough call, although i really shouldnt be buying keyboards again right now haha
Joined at the last moment, hopefully it doesn't take any longer than 4 or 5 months as I'll be living elsewhere haha.
Joined at the last moment, hopefully it doesn't take any longer than 4 or 5 months as I'll be living elsewhere haha.
I think you could still update your new address. I'm not sure about it but ask JD.
Hey guys I'm hosting a giveaway based on this keyset over here: https://geekhack.org/index.php?topic=68726.new#new come check it out :)
How many more sets are needed? I've really been debating picking up a set but I'm hesitant to drop $120 on MX gear when I've literally barely touched my MX boards since getting the RealForce. I don't mind picking up a set though if it will help push us closer to MOQ.
Joined at the last moment, hopefully it doesn't take any longer than 4 or 5 months as I'll be living elsewhere haha.
I think you could still update your new address. I'm not sure about it but ask JD.
Yes, you can update your shipping address at any time before the sets ship.
I'm in for a set. Better late than never. This is getting to be an expensive month.
I'm in for a set. Better late than never. This is getting to be an expensive month.
Your telling me, I just bought two keyboards that aren't even mx and another set of these. I have a problem. :-\
I'm in for a set. Better late than never. This is getting to be an expensive month.
Your telling me, I just bought two keyboards that aren't even mx and another set of these. I have a problem. :-\
If being a great guy is a problem, then yes, you have a problem. ;)
My order still say processing, is that normal? I've never used swipe to pay for something before so i don't know. Just want to make sure my order officially gets in on time.
My order still say processing, is that normal? I've never used swipe to pay for something before so i don't know. Just want to make sure my order officially gets in on time.
that just means your payment didnt come through this end sir
im just going out but if you send me your order number and pp email via pm i can get you invoiced if thats better for you
Typically 6-8 weeks for production.
it's random and often depends on what other group buys they have going on.Thanks for the fast replies
in my experience you will be waiting around 2 - 3 months but it could be longer if something special like the recent Granite R2 gb happens.
Typically 6-8 weeks for production.it's random and often depends on what other group buys they have going on.Thanks for the fast replies
in my experience you will be waiting around 2 - 3 months but it could be longer if something special like the recent Granite R2 gb happens.
I've placed my order, this set goes too well with the board I have in transit: it has orange backlighting.
Thanks for the fast replies
I've placed my order, this set goes too well with the board I have in transit: it has orange backlighting.
It is very unlikely that you will see any backlighting through the tops or sides of the keys - SA keycaps are very thick.
The best you'll get is a bit of underglow.
Typically 6-8 weeks for production.it's random and often depends on what other group buys they have going on.Thanks for the fast replies
in my experience you will be waiting around 2 - 3 months but it could be longer if something special like the recent Granite R2 gb happens.
I've placed my order, this set goes too well with the board I have in transit: it has orange backlighting.
It is very unlikely that you will see any backlighting through the tops or sides of the keys - SA keycaps are very thick.
The best you'll get is a bit of underglow.
Typically 6-8 weeks for production.it's random and often depends on what other group buys they have going on.Thanks for the fast replies
in my experience you will be waiting around 2 - 3 months but it could be longer if something special like the recent Granite R2 gb happens.
I've placed my order, this set goes too well with the board I have in transit: it has orange backlighting.
It is very unlikely that you will see any backlighting through the tops or sides of the keys - SA keycaps are very thick.
The best you'll get is a bit of underglow.
Damn I can already imagine the underglow on it ... It looks beautiful in my head!
Typically 6-8 weeks for production.it's random and often depends on what other group buys they have going on.Thanks for the fast replies
in my experience you will be waiting around 2 - 3 months but it could be longer if something special like the recent Granite R2 gb happens.
I've placed my order, this set goes too well with the board I have in transit: it has orange backlighting.
It is very unlikely that you will see any backlighting through the tops or sides of the keys - SA keycaps are very thick.
The best you'll get is a bit of underglow.
Damn I can already imagine the underglow on it ... It looks beautiful in my head!
But the novatouch has no LEDs.
Yeah I know but I was just imagining someone with a orange backlighted keyboard having it.
Yeah I know but I was just imagining someone with a orange backlighted keyboard having it.
Hmmm...
My black LZ-GH has orange backlighting...
Yeah I know but I was just imagining someone with a orange backlighted keyboard having it.
Hmmm...
My black LZ-GH has orange backlighting...
As the ambassador of this sale, you must show a picture with it once you'll get your set! :D
I trust you with that. I almost have some regret not buying several sets but I don't know what to expect as I have never tried SA caps. Additionally I don't have the money for them as well haha.Yeah I know but I was just imagining someone with a orange backlighted keyboard having it.
Hmmm...
My black LZ-GH has orange backlighting...
As the ambassador of this sale, you must show a picture with it once you'll get your set! :D
One set will most likely stay on there permanently. :)
One set will most likely stay on there permanently. :)
One set will most likely stay on there permanently. :)
You always buy the sets then buy the keyboards later on. Still prefer to leave the key-sets on keyboards and buy new keyboards to fill out, with NEW key-cap purchases.
This is GEEKHACK don't waste time trying to restrain yourself from spending, it will not help your sanity to resist this awesome key-set, designed by you :thumb: .
What does the "full contour" mean? I tried searching in the thread but since those words are in the title literally every reply matched my search. I'm familiar with what SA profile is, but does full contour mean there is something unique about this set?
With the only real issue being the row 3 left shift instead of row 4 :(What does the "full contour" mean? I tried searching in the thread but since those words are in the title literally every reply matched my search. I'm familiar with what SA profile is, but does full contour mean there is something unique about this set?
There are different row profiles, unlike most previous SA buys were everything was row 3. The only other "full contour" set I can think of off the top of my head is Pulse, and of course the upcoming RetroBlight. Full Contour is all the rage!
What does the "full contour" mean? I tried searching in the thread but since those words are in the title literally every reply matched my search. I'm familiar with what SA profile is, but does full contour mean there is something unique about this set?
There are different row profiles, unlike most previous SA buys were everything was row 3. The only other "full contour" set I can think of off the top of my head is Pulse, and of course the upcoming RetroBlight. Full Contour is all the rage!
What does the "full contour" mean? I tried searching in the thread but since those words are in the title literally every reply matched my search. I'm familiar with what SA profile is, but does full contour mean there is something unique about this set?That's what full contoured means:
Anybody and everybody with a JD40 you need this set plus an extra for your other keyboard.
Anybody and everybody with a JD40 you need this set plus an extra for your other keyboard.
QFT and emphasis
Can I pay my order with PayPal?Anybody and everybody with a JD40 you need this set plus an extra for your other keyboard.
QFT and emphasis
Also, has compatibility with the JD45 :)
Something is wrong with my CC and I have PayPal funds but I don't know how to pay via PP.
Will I still get an order confirmation and number?
Full countour SA:Show Image(http://i.imgur.com/EZgGBdg.jpg)
The angle of the prop holding the keys is way too much (you should have your board close to flat in most cases for best ergonomics), but you can see the angles of the keycap tops at least.
Full countour SA:Show Image(http://i.imgur.com/EZgGBdg.jpg)
The angle of the prop holding the keys is way too much (you should have your board close to flat in most cases for best ergonomics), but you can see the angles of the keycap tops at least.
According with research on the subject the best ergonomics in a flat single unit keyboard is when it has a negative angle. Tilted backwards, instead of the common practice to tilt it forward.
Full countour SA:Show Image(http://i.imgur.com/EZgGBdg.jpg)
The angle of the prop holding the keys is way too much (you should have your board close to flat in most cases for best ergonomics), but you can see the angles of the keycap tops at least.
According with research on the subject the best ergonomics in a flat single unit keyboard is when it has a negative angle. Tilted backwards, instead of the common practice to tilt it forward.
Doesn't apply to everyone and every setup though. Ergonomics is a very personal subject, more so than switch preference. There are some general guide lines though. I don't believe this to be one of them.
i think im all up to date other than 2 people who i just messaged, but if you were expecting an invoice, and havent had one, please send me a PM
(http://i.imgur.com/1R96WjE.jpg)i think im all up to date other than 2 people who i just messaged, but if you were expecting an invoice, and havent had one, please send me a PM
Brilliant, can not wait for these babies to start falling out of SP's molds :o . If you are currently pretending to be a geek and have NOT participated here on this Group Buy then walk away in great shame and disgrace because you are not wanted here anymore 8) .
ONLY the real enthusiasts belong here because we all fronted with the moolah and want a piece of Geekhack on our keyboards - FOREVER :thumb: .
Were you able to figure my order out sir bunny?
Looks like I ordered twice by accident. There's an unpaid and a paid order in my history, but I only need one. If someone could remove the unpaid one, that would be great ;)
invoice to sp has been paid
invoice to sp has been paid
P.S. This really should have been called the "Geekhack the Planet" set. :D
P.S. This really should have been called the "Geekhack the Planet" set. :DThat deserves its own custom key.
P.S. This really should have been called the "Geekhack the Planet" set. :DThat deserves its own custom key.
invoice to sp has been paidGreat news. I suppose it's gonna be another 2 months before we'll actually see the caps?
invoice to sp has been paidGreat news. I suppose it's gonna be another 2 months before we'll actually see the caps?
slot confirmed with sp
this set will ship to us april 16th from them, normally takes a few days to get to us from there, and we will turn it round right away
slot confirmed with sp
this set will ship to us april 16th from them, normally takes a few days to get to us from there, and we will turn it round right away
Thanks for the information. We appreciate the hard work for all the sale/GB you guys (CtrlAlt team, JD) put into. <3
slot confirmed with sp
this set will ship to us april 16th from them, normally takes a few days to get to us from there, and we will turn it round right away
Thanks for the information. We appreciate the hard work for all the sale/GB you guys (CtrlAlt team, JD) put into. <3
slot confirmed with sp
this set will ship to us april 16th from them, normally takes a few days to get to us from there, and we will turn it round right away
Thanks for the information. We appreciate the hard work for all the sale/GB you guys (CtrlAlt team, JD) put into. <3
See Bunny what you've done, you've literally became the Dr.Phil of Key-caps sorting out everyone's frustrations with ease and making them better people for it.
We need to have a syndicated show with you showing the art of ordering and what to expect during Group Buys run by CTRL/ALT and then having Geekhackers come on stage professing their problems and what not. You of course will sort out any and all difficulties within their lives and again become a much loved professor of key-cap love.........
Hey guys I know there's awhile before these sets will get shipped to the buyers but I just want to put it out there if anybody needs to recoup there money I will buy there set from them this is an open ended offer until (or even if) I am able to acquire a set. I was not even a member of GH yet when this GB was active. The black and orange color as well as the set being in SA are a freaking dream set for me. Anyways I thought I would put the offer out and what an awesome set . Thanks all
Sincerely
Sed8 (Ashley)
Hey guys I know there's awhile before these sets will get shipped to the buyers but I just want to put it out there if anybody needs to recoup there money I will buy there set from them this is an open ended offer until (or even if) I am able to acquire a set. I was not even a member of GH yet when this GB was active. The black and orange color as well as the set being in SA are a freaking dream set for me. Anyways I thought I would put the offer out and what an awesome set . Thanks all
Sincerely
Sed8 (Ashley)
i have about 20 spare sets, if you want one sir just shoot me a pm and we can sort it out so it goes out with all the other gb orders
Good guy Bunny. Taking some extra sets for people to be able to acquire them even though the GB ended.
Good guy Bunny. Taking some extra sets for people to be able to acquire them even though the GB ended.
That's one thing to note when dealing with Bunny, he has such a HUGE heart when it comes to dealing with anyone, even the forgetmenot's that miss out on firm deadlines.
THEY eventually get their orders fulfilled so everyone gets their share of these babies, Bunny NEVER ignores those that have problems. He really is the Angel of Geekhack 8) .
Good guy Bunny. Taking some extra sets for people to be able to acquire them even though the GB ended.
That's one thing to note when dealing with Bunny, he has such a HUGE heart when it comes to dealing with anyone, even the forgetmenot's that miss out on firm deadlines.
THEY eventually get their orders fulfilled so everyone gets their share of these babies, Bunny NEVER ignores those that have problems. He really is the Angel of Geekhack 8) .
I totally agree! :thumb:
It must require some good financial state to invest that much waiting for people to pick theirs afterwards. Well I guess his experience as a seller on this forum showed him that once the pictures will start to flow everybody will want a piece of theirs.
Good guy Bunny. Taking some extra sets for people to be able to acquire them even though the GB ended.
That's one thing to note when dealing with Bunny, he has such a HUGE heart when it comes to dealing with anyone, even the forgetmenot's that miss out on firm deadlines.
THEY eventually get their orders fulfilled so everyone gets their share of these babies, Bunny NEVER ignores those that have problems. He really is the Angel of Geekhack 8) .
I totally agree! :thumb:
It must require some good financial state to invest that much waiting for people to pick theirs afterwards. Well I guess his experience as a seller on this forum showed him that once the pictures will start to flow everybody will want a piece of theirs.
Not as much risk as you might think - [CTRL]ALT's GBs are always very popular, and a lot of people who miss out wish they had participated, so BunnyLake is pretty much guaranteed to sell those few extra sets.
Good guy Bunny. Taking some extra sets for people to be able to acquire them even though the GB ended.
That's one thing to note when dealing with Bunny, he has such a HUGE heart when it comes to dealing with anyone, even the forgetmenot's that miss out on firm deadlines.
THEY eventually get their orders fulfilled so everyone gets their share of these babies, Bunny NEVER ignores those that have problems. He really is the Angel of Geekhack 8) .
I totally agree! :thumb:
It must require some good financial state to invest that much waiting for people to pick theirs afterwards. Well I guess his experience as a seller on this forum showed him that once the pictures will start to flow everybody will want a piece of theirs.
Not as much risk as you might think - [CTRL]ALT's GBs are always very popular, and a lot of people who miss out wish they had participated, so BunnyLake is pretty much guaranteed to sell those few extra sets.
Not much risks indeed but it still requires you to pay upfront. You need to able to sit on that money for a while, the time he sells them off.
however i always like to get some extras, there are always people who either missed it, couldnt afford it at the time or werent members when the buy was live, so i like to accommodate that as much as possible
Thanks again I was so bummed to log onto ctrlalt for the firs time and see I missed the group buy by one day. Now I just need to come up with another $130 for hyper fuse...I freaking love this stuff my bank account on the other hand is weeping and dwindling in equal amounts... Oh well at least I paid rent this month...god I can barely afford cherry board's and caps but yet this voice in my head keeps telling me that 55g topre is what I really need. :thumb: :eek:Good guy Bunny. Taking some extra sets for people to be able to acquire them even though the GB ended.
That's one thing to note when dealing with Bunny, he has such a HUGE heart when it comes to dealing with anyone, even the forgetmenot's that miss out on firm deadlines.
THEY eventually get their orders fulfilled so everyone gets their share of these babies, Bunny NEVER ignores those that have problems. He really is the Angel of Geekhack 8) .
I totally agree! :thumb:
It must require some good financial state to invest that much waiting for people to pick theirs afterwards. Well I guess his experience as a seller on this forum showed him that once the pictures will start to flow everybody will want a piece of theirs.
Not as much risk as you might think - [CTRL]ALT's GBs are always very popular, and a lot of people who miss out wish they had participated, so BunnyLake is pretty much guaranteed to sell those few extra sets.
Not much risks indeed but it still requires you to pay upfront. You need to able to sit on that money for a while, the time he sells them off.
so theres really no risk on something like this with the extra sets, however the previous issues with the old US proxy have sucked, because its not just orders that are delayed, again i have extras of all of those so that money has been tied up for ages
however i always like to get some extras, there are always people who either missed it, couldnt afford it at the time or werent members when the buy was live, so i like to accommodate that as much as possible
god I can barely afford cherry board's and caps but yet this voice in my head keeps telling me that 55g topre is what I really need. :thumb: :o
so theres really no risk on something like this with the extra sets, however the previous issues with the old US proxy have sucked, because its not just orders that are delayed, again i have extras of all of those so that money has been tied up for ageshowever i always like to get some extras, there are always people who either missed it, couldnt afford it at the time or werent members when the buy was live, so i like to accommodate that as much as possibleNot much risks indeed but it still requires you to pay upfront. You need to able to sit on that money for a while, the time he sells them off.Not as much risk as you might think - [CTRL]ALT's GBs are always very popular, and a lot of people who miss out wish they had participated, so BunnyLake is pretty much guaranteed to sell those few extra sets.I totally agree! :thumb: It must require some good financial state to invest that much waiting for people to pick theirs afterwards. Well I guess his experience as a seller on this forum showed him that once the pictures will start to flow everybody will want a piece of theirs.Good guy Bunny. Taking some extra sets for people to be able to acquire them even though the GB ended.That's one thing to note when dealing with Bunny, he has such a HUGE heart when it comes to dealing with anyone, even the forgetmenot's that miss out on firm deadlines.THEY eventually get their orders fulfilled so everyone gets their share of these babies, Bunny NEVER ignores those that have problems. He really is the Angel of Geekhack 8) .
god I can barely afford cherry board's and caps but yet this voice in my head keeps telling me that 55g topre is what I really need. :thumb: :o
Get both the Thorpie 55g and the Cherry's that way you'll have more keyboards to play with. Although Realforce's aren't available to GMK, BSP or SP key-caps but it's still a sound investment.
Before long you'll have hundreds of keyboards begging for key-caps on a rotating basis, hence start collecting as soon as possible. Also need to get a well paid job to facilitate this type of hobby as you go forth in life :thumb: .
Is anyone familiar with the feel of these SA keycaps? Specifically the top part? Are the keys rough/textured like the dsa dolch keycaps or are they smoother?
Is anyone familiar with the feel of these SA keycaps? Specifically the top part? Are the keys rough/textured like the dsa dolch keycaps or are they smoother?I think most of the DSA sets have had matte finish on top. These are semi matte, so they will be smoother.
Is anyone familiar with the feel of these SA keycaps? Specifically the top part? Are the keys rough/textured like the dsa dolch keycaps or are they smoother?I was really hoping they would be the smooth and shiny ones. Like the the pulse SA
That's what they will be. PuLSE was semi matte, as well.Is anyone familiar with the feel of these SA keycaps? Specifically the top part? Are the keys rough/textured like the dsa dolch keycaps or are they smoother?I was really hoping they would be the smooth and shiny ones. Like the the pulse SA
I am freaking psyched then.That's what they will be. PuLSE was semi matte, as well.Is anyone familiar with the feel of these SA keycaps? Specifically the top part? Are the keys rough/textured like the dsa dolch keycaps or are they smoother?I was really hoping they would be the smooth and shiny ones. Like the the pulse SA
I am freaking psyched then.
Is anyone familiar with the feel of these SA keycaps? Specifically the top part? Are the keys rough/textured like the dsa dolch keycaps or are they smoother?I think most of the DSA sets have had matte finish on top. These are semi matte, so they will be smoother.
SA are available in matte finish, but we chose to go with the semi matte for these, in keeping with the retro styling.
Damn you, JD... Wallet hack'd. :'(
Damn you, JD... Wallet hack'd. :'(
Damn you, JD... Wallet hack'd. :'(
YES we have indeed picked the BEST SP key-set released thus far for this year.
Colour-way is perfect and the way it looks is just pure hardcore pron, with no excuses whatsoever :thumb: .
Just got emailed about this splendid key-set;
Shipping date from Signature Plastics for the Hack'd Key-set, is April 16th 2015, sounds good to me :thumb: .
(PS. Love the email graphics, so in tune to the colour-way of our chosen key-set, kudos CTRL/ALT for keeping it real).
Just got emailed about this splendid key-set;
Shipping date from Signature Plastics for the Hack'd Key-set, is April 16th 2015, sounds good to me :thumb: .
(PS. Love the email graphics, so in tune to the colour-way of our chosen key-set, kudos CTRL/ALT for keeping it real).
i was gonna save these extras for the store, but i have about 15 spare sets, so if anyone wants one and for it to ship with the regular gb, hit me up, id like to try free up a little capital to order a few extra hyperfuse sets
i was gonna save these extras for the store, but i have about 15 spare sets, so if anyone wants one and for it to ship with the regular gb, hit me up, id like to try free up a little capital to order a few extra hyperfuse sets
Bunny if you still have spare sets I'd be interested in one for the Infinity standard layout I've got on order.
It looks like all the special keys I would need (short right shift and fn buttons) are included in this set...can anyone confirm this?
i was gonna save these extras for the store, but i have about 15 spare sets, so if anyone wants one and for it to ship with the regular gb, hit me up, id like to try free up a little capital to order a few extra hyperfuse sets
Bunny if you still have spare sets I'd be interested in one for the Infinity standard layout I've got on order.
It looks like all the special keys I would need (short right shift and fn buttons) are included in this set...can anyone confirm this?
Yes, the Hack'd By Geeks set will fully support either layout of the Infinity, Hacker or Standard. :)
Yes it is a 6U. I don't see that in this set. Good catch. But mine is a standard so I won't need the 6U.i was gonna save these extras for the store, but i have about 15 spare sets, so if anyone wants one and for it to ship with the regular gb, hit me up, id like to try free up a little capital to order a few extra hyperfuse sets
Bunny if you still have spare sets I'd be interested in one for the Infinity standard layout I've got on order.
It looks like all the special keys I would need (short right shift and fn buttons) are included in this set...can anyone confirm this?
Yes, the Hack'd By Geeks set will fully support either layout of the Infinity, Hacker or Standard. :)
Really? Isn't the 'hacker' a 6u space bar? :S
Ah, that's true. No 6u spacebar. :)AFAIK 6U DSA space bars are available from SP. I wonder how many it would take to GB those in the right shade of gray.
They will do any number for a price. Probably want to get about 25+ for a good price, though. Someone could always put up an IC on PMK and get people to vote for it. :)Ah, that's true. No 6u spacebar. :)AFAIK 6U DSA space bars are available from SP. I wonder how many it would take to GB those in the right shade of gray.
Ah, that's true. No 6u spacebar. :)AFAIK 6U DSA space bars are available from SP. I wonder how many it would take to GB those in the right shade of gray.
what about 6u?
A bloody G80-1865 uses that size, a real pain when it comes to Group Buys because SP doesn't have the molding for fitment to these brilliant keyboards :'( .
I think the current 660M uses that size as well........
Sounds like the world needs a spacebar artisan.
Sounds like the world needs a spacebar artisan.
Sounds like the world needs a spacebar artisan.
Or keyboard companies sticking to the standard layouts perhaps?
I got in on the GMK Hyperfuse GB a day or two before it ended. I saw post on reddit about it and decided to check it out at CtrlAlt. While I was there I saw the Hack'd by Geeks set and that I had missed out on it. I joined this site just so I could message Bunny to see if there were any extras of this set. I managed to find a full set of Skull Squadron keycaps that I have on my WASD v1 (brown) right now. I love them. I'm going to have to put them somewhere else once Hack'd comes in. I don't have enough keyboards for all the awesome keycaps that I have on the way. Sorry for rambling, I'm just really excited about this set.
still looking good for april 16th, sp normally contact us by now if there are any delaysIs that when shipping begins?
I got in on the GMK Hyperfuse GB a day or two before it ended. I saw post on reddit about it and decided to check it out at CtrlAlt. While I was there I saw the Hack'd by Geeks set and that I had missed out on it. I joined this site just so I could message Bunny to see if there were any extras of this set. I managed to find a full set of Skull Squadron keycaps that I have on my WASD v1 (brown) right now. I love them. I'm going to have to put them somewhere else once Hack'd comes in. I don't have enough keyboards for all the awesome keycaps that I have on the way. Sorry for rambling, I'm just really excited about this set.
Welcome to GeekHack! Way to jump in with both feet, man.
BTW, you may have to explain what you mean above, as I'm not sure anyone on GeekHack is familiar with the expression enough keyboards.
Usually around here it's just "MOAR KEYBOARD"I got in on the GMK Hyperfuse GB a day or two before it ended. I saw post on reddit about it and decided to check it out at CtrlAlt. While I was there I saw the Hack'd by Geeks set and that I had missed out on it. I joined this site just so I could message Bunny to see if there were any extras of this set. I managed to find a full set of Skull Squadron keycaps that I have on my WASD v1 (brown) right now. I love them. I'm going to have to put them somewhere else once Hack'd comes in. I don't have enough keyboards for all the awesome keycaps that I have on the way. Sorry for rambling, I'm just really excited about this set.
Welcome to GeekHack! Way to jump in with both feet, man.
BTW, you may have to explain what you mean above, as I'm not sure anyone on GeekHack is familiar with the expression enough keyboards.
I modified enough keyboards earlier in the sentence with don't have. That imparts the meaning that I have an insufficient number of keyboards. I believe this might be a little more familiar around here.
still looking good for april 16th, sp normally contact us by now if there are any delays
I got in on the GMK Hyperfuse GB a day or two before it ended. I saw post on reddit about it and decided to check it out at CtrlAlt. While I was there I saw the Hack'd by Geeks set and that I had missed out on it. I joined this site just so I could message Bunny to see if there were any extras of this set. I managed to find a full set of Skull Squadron keycaps that I have on my WASD v1 (brown) right now. I love them. I'm going to have to put them somewhere else once Hack'd comes in. I don't have enough keyboards for all the awesome keycaps that I have on the way. Sorry for rambling, I'm just really excited about this set.
Usually around here it's just "MOAR KEYBOARD"
still looking good for april 16th, sp normally contact us by now if there are any delaysIs that when shipping begins?
thats when sp said production would finish and they would ship us the sets
Funny those rolling deadlines only seem to affect 7bit's buys.thats when sp said production would finish and they would ship us the sets
Hopefully that that is the case. And I wouldn't suggest asking 7bit how their timelines seem to hold up... ;D
Sounds like the world needs a spacebar artisan.I could attempt to do it.
Sounds like the world needs a spacebar artisan.I could attempt to do it.
Check the link on my Sig.
Just posting to confirm I sold my spot in the group buy to @KHAANNN. Thanks buddy. :thumb:
Just posting to confirm I sold my spot in the group buy to @KHAANNN. Thanks buddy. :thumb:
Thank you too :)
I wasn't around 2 months ago, so when I saw the Hack'd by Geeks keyscheme for the first time, I really wished I joined in 2 months ago, jumped on the opportunity without thinking much, this will be my first SA set :)
I'm also a big fan of the ctrlalt / jdcarpe keysets
same here bunny turned my frown up side down . I wasn't a member when the GB was live and bunnz took pity. This will Also be my first SA set :thumb:
I'm really excited JD you guys put together a hell of a set!same here bunny turned my frown up side down . I wasn't a member when the GB was live and bunnz took pity. This will Also be my first SA set :thumb:
First set = best set
:))
I'm sad to let the set go but I'm a GMK fiend and that needs funding lol
I'm sad to let the set go but I'm a GMK fiend and that needs funding lol
Don't make me summon Elrick to explain how this works. ;)
I'm sad to let the set go but I'm a GMK fiend and that needs funding lol
Don't make me summon Elrick to explain how this works. ;)
I feel bad enough JD way to rub it in. :'(
I'm sad to let the set go but I'm a GMK fiend and that needs funding lol
Don't make me summon Elrick to explain how this works. ;)
I'm sad to let the set go but I'm a GMK fiend and that needs funding lol
Don't make me summon Elrick to explain how this works. ;)
I feel bad enough JD way to rub it in. :'(
Just pick one up later from someone when you have the funds. :brohug:
i think we should have pics within the next week if sp are still on schedule, they havent contacted us to say itll be late for any reason which they normally would have by now
Friends,
I missed this one first time around. How sad will I be if I don't pm bunny to ask if there's one more set?
I ask because my wallet is hurting, amigos. And I thought,.... maybe, .... if I just don't ask, no further harm will come to my battered finances.
But I fear it might be a mistake.
Help.
-R
Friends,
I missed this one first time around. How sad will I be if I don't pm bunny to ask if there's one more set?
I ask because my wallet is hurting, amigos. And I thought,.... maybe, .... if I just don't ask, no further harm will come to my battered finances.
But I fear it might be a mistake.
Help.
-R
we have 3 spares left
Friends,
I missed this one first time around. How sad will I be if I don't pm bunny to ask if there's one more set?
I ask because my wallet is hurting, amigos. And I thought,.... maybe, .... if I just don't ask, no further harm will come to my battered finances.
But I fear it might be a mistake.
Help.
-R
we have 3 spares left
Oh dear. What to do? Penumbra is coming....can you hear that cracking sound as my mind splits in two?
Oh dear. What to do? Penumbra is coming....can you hear that cracking sound as my mind splits in two?
Oh dear. What to do? Penumbra is coming....can you hear that cracking sound as my mind splits in two?
I've got Penumbra and I like the look of Hack'd by Geeks far more :thumb: .
Why you might ask, simply because of it's retro look and coloured orange legends which excites me so. Hack'd by Geeks should be in every keyboard you own simply because it deserves to be admired daily 8) .
Friends,
I missed this one first time around. How sad will I be if I don't pm bunny to ask if there's one more set?
I ask because my wallet is hurting, amigos. And I thought,.... maybe, .... if I just don't ask, no further harm will come to my battered finances.
But I fear it might be a mistake.
Help.
-R
we have 3 spares left
OmenFriends,
I missed this one first time around. How sad will I be if I don't pm bunny to ask if there's one more set?
I ask because my wallet is hurting, amigos. And I thought,.... maybe, .... if I just don't ask, no further harm will come to my battered finances.
But I fear it might be a mistake.
Help.
-R
we have 3 spares left
I'll pick up a set if I read that correctly. Just tell me where to throw my monies.
I can almost assure you that posting it on the classifieds here or on mechmarket will allow you to sell it for at least your cost plus shipping or perhaps even more to avoid selling at a loss. This is an amazing key set.OmenFriends,
I missed this one first time around. How sad will I be if I don't pm bunny to ask if there's one more set?
I ask because my wallet is hurting, amigos. And I thought,.... maybe, .... if I just don't ask, no further harm will come to my battered finances.
But I fear it might be a mistake.
Help.
-R
we have 3 spares left
I'll pick up a set if I read that correctly. Just tell me where to throw my monies.
I feel your wallet pain however this is a really gorgeous set and I'm not sure if you have felt SA profile keys but people tend to either love them or hate them. I for one LOVE ThEM ! The worst case scenario you can post it for sale in the classifieds here or on mechmarket for slightly less than your initial investment (Some post them for more ) and recover some monies. I have a feeling though once you get your hands on it your gong to be very happy you did. Either way good luck and thanks again bunny for helping us out who showed up late to party you rock. Cheers !
I can almost assure you that posting it on the classifieds here or on mechmarket will allow you to sell it for at least your cost plus shipping or perhaps even more to avoid selling at a loss. This is an amazing key set.OmenFriends,
I missed this one first time around. How sad will I be if I don't pm bunny to ask if there's one more set?
I ask because my wallet is hurting, amigos. And I thought,.... maybe, .... if I just don't ask, no further harm will come to my battered finances.
But I fear it might be a mistake.
Help.
-R
we have 3 spares left
I'll pick up a set if I read that correctly. Just tell me where to throw my monies.
I feel your wallet pain however this is a really gorgeous set and I'm not sure if you have felt SA profile keys but people tend to either love them or hate them. I for one LOVE ThEM ! The worst case scenario you can post it for sale in the classifieds here or on mechmarket for slightly less than your initial investment (Some post them for more ) and recover some monies. I have a feeling though once you get your hands on it your gong to be very happy you did. Either way good luck and thanks again bunny for helping us out who showed up late to party you rock. Cheers !
Outch the wallet is hurt for sure.I can almost assure you that posting it on the classifieds here or on mechmarket will allow you to sell it for at least your cost plus shipping or perhaps even more to avoid selling at a loss. This is an amazing key set.OmenFriends,
I missed this one first time around. How sad will I be if I don't pm bunny to ask if there's one more set?
I ask because my wallet is hurting, amigos. And I thought,.... maybe, .... if I just don't ask, no further harm will come to my battered finances.
But I fear it might be a mistake.
Help.
-R
we have 3 spares left
I'll pick up a set if I read that correctly. Just tell me where to throw my monies.
I feel your wallet pain however this is a really gorgeous set and I'm not sure if you have felt SA profile keys but people tend to either love them or hate them. I for one LOVE ThEM ! The worst case scenario you can post it for sale in the classifieds here or on mechmarket for slightly less than your initial investment (Some post them for more ) and recover some monies. I have a feeling though once you get your hands on it your gong to be very happy you did. Either way good luck and thanks again bunny for helping us out who showed up late to party you rock. Cheers !
Yea, I just... Sigh, within the past 30 days, I signed up for the hyperfuse GB, 330 gateron switches/some of those are clear tops, 3x vortex pbt keysets from massdrop, the ergodox infinity massdrop, ordered a planck kit.... Still debating on the granite set on massdrop, but I like the look of this set more. I didn't sign up originally because I missed it.
Anyway, if a set is available, I'll def pick one up.
I can almost assure you that posting it on the classifieds here or on mechmarket will allow you to sell it for at least your cost plus shipping or perhaps even more to avoid selling at a loss. This is an amazing key set.OmenFriends,
I missed this one first time around. How sad will I be if I don't pm bunny to ask if there's one more set?
I ask because my wallet is hurting, amigos. And I thought,.... maybe, .... if I just don't ask, no further harm will come to my battered finances.
But I fear it might be a mistake.
Help.
-R
we have 3 spares left
I'll pick up a set if I read that correctly. Just tell me where to throw my monies.
I feel your wallet pain however this is a really gorgeous set and I'm not sure if you have felt SA profile keys but people tend to either love them or hate them. I for one LOVE ThEM ! The worst case scenario you can post it for sale in the classifieds here or on mechmarket for slightly less than your initial investment (Some post them for more ) and recover some monies. I have a feeling though once you get your hands on it your gong to be very happy you did. Either way good luck and thanks again bunny for helping us out who showed up late to party you rock. Cheers !
Yea, I just... Sigh, within the past 30 days, I signed up for the hyperfuse GB, 330 gateron switches/some of those are clear tops, 3x vortex pbt keysets from massdrop, the ergodox infinity massdrop, ordered a planck kit.... Still debating on the granite set on massdrop, but I like the look of this set more. I didn't sign up originally because I missed it.
Anyway, if a set is available, I'll def pick one up.
You guys! I was hoping you'd talk me out of it, instead you enabled me!
Omen, your story sounds like mine! Maybe we should start a support group. Who's in?
:D :-\ :confused:
You guys! I was hoping you'd talk me out of it, instead you enabled me!
Omen, your story sounds like mine! Maybe we should start a support group. Who's in?
:D :-\ :confused:
Well, I didn't have this problem before I started visiting /r/mechanicalkeyboards or geekhack.org, or massdrop. I suppose the correct solution would be to stop looking at other people's setups. Nothing good can come of it =P
You guys! I was hoping you'd talk me out of it, instead you enabled me!
Omen, your story sounds like mine! Maybe we should start a support group. Who's in?
:D :-\ ???
Well, I didn't have this problem before I started visiting /r/mechanicalkeyboards or geekhack.org, or massdrop. I suppose the correct solution would be to stop looking at other people's setups. Nothing good can come of it =P
You're right. I need more SA sets for these 60% boards, though.Show Image(http://i.imgur.com/dK3X0Kj.jpg)
SA and HHKB, a mix I would like to try. :D
SA and HHKB, a mix I would like to try. :D
Yes, I need some hybrid sliders for that, though. :)
SA and HHKB, a mix I would like to try. :D
Yes, I need some hybrid sliders for that, though. :)
Also same price at new egg :)SA and HHKB, a mix I would like to try. :D
Yes, I need some hybrid sliders for that, though. :)
novatouch after coupon at amazon right now for $149.99 ;)
You guys! I was hoping you'd talk me out of it, instead you enabled me!
Omen, your story sounds like mine! Maybe we should start a support group. Who's in?
:D :-\ :confused:
Well, I didn't have this problem before I started visiting /r/mechanicalkeyboards or geekhack.org, or massdrop. I suppose the correct solution would be to stop looking at other people's setups. Nothing good can come of it =P
You're right. I need more SA sets for these 60% boards, though.Show Image(http://i.imgur.com/dK3X0Kj.jpg)
You need Penumbra Round 2, Danger Zone, Midnight SA and Retro SA at the very least ;D
You're right. I need more SA sets for these 60% boards, though.Show Image(http://i.imgur.com/dK3X0Kj.jpg)
You're right. I need more SA sets for these 60% boards, though.Show Image(http://i.imgur.com/dK3X0Kj.jpg)
Why would you show me those?!?! My monies can only fly out of my wallet so fast.
Also... paid invoice from Bunny for "hack'd by geeks" set. They'll be my first SA family set. I noticed on the http://keycapsdirect.com/key-caps.php page about SA family they don't appear to come in PBT, is this common for all SA or just the ones coming from Signature Plastics. I didn't have much luck googling for PBT SA keycaps.
You're right. I need more SA sets for these 60% boards, though.Show Image(http://i.imgur.com/dK3X0Kj.jpg)
Why would you show me those?!?! My monies can only fly out of my wallet so fast.
Also... paid invoice from Bunny for "hack'd by geeks" set. They'll be my first SA family set. I noticed on the http://keycapsdirect.com/key-caps.php page about SA family they don't appear to come in PBT, is this common for all SA or just the ones coming from Signature Plastics. I didn't have much luck googling for PBT SA keycaps.
PBT is overrated. Thick ABS is where it's at.
In all honestly, people go nuts for PBT because it's more wear resistant and feels better than stock ABS caps that come with most keyboard. But a quality double shot ABS set is my preference, and is also MUCH better than any stock keycaps to me, including most of the stock PBT options.
I'm having a play in layout editor to see what I can do with this set and noticed the ISO short shift is in row 3 - is this due to the same mold problem that plagues the standard shifts or is it just wrong in the mock up?
Thanks for the quick reply, I'll try to avoid it!I'm having a play in layout editor to see what I can do with this set and noticed the ISO short shift is in row 3 - is this due to the same mold problem that plagues the standard shifts or is it just wrong in the mock up?
It's because semi matte finish is not available for R4 1.25u keys.
You're right. I need more SA sets for these 60% boards, though.Show Image(http://i.imgur.com/dK3X0Kj.jpg)
Why would you show me those?!?! My monies can only fly out of my wallet so fast.
Also... paid invoice from Bunny for "hack'd by geeks" set. They'll be my first SA family set. I noticed on the http://keycapsdirect.com/key-caps.php (http://keycapsdirect.com/key-caps.php) page about SA family they don't appear to come in PBT, is this common for all SA or just the ones coming from Signature Plastics. I didn't have much luck googling for PBT SA keycaps.
You're right. I need more SA sets for these 60% boards, though.Show Image(http://i.imgur.com/dK3X0Kj.jpg)
Why would you show me those?!?! My monies can only fly out of my wallet so fast.
Also... paid invoice from Bunny for "hack'd by geeks" set. They'll be my first SA family set. I noticed on the http://keycapsdirect.com/key-caps.php (http://keycapsdirect.com/key-caps.php) page about SA family they don't appear to come in PBT, is this common for all SA or just the ones coming from Signature Plastics. I didn't have much luck googling for PBT SA keycaps.
AFAIK SA is only a profile name by SP. If you look at the stock key caps set sold with the RF HiPro it is similar but it isn't called SA. :)
Is everything looking good so far regarding the shipment to JD from SP on the 16th? :)
I didn't remember where they would be headed first. I guess it will be a CtrlAlt team member in USA and then it will be sent to you for the European orders. Am I right?Is everything looking good so far regarding the shipment to JD from SP on the 16th? :)
sets arent going to jd
i havent heard any delays from sp
but we did email them last night to confirm that the 16th is still the day and to request pics
as soon as i get a reply from them i will be updating here
hey guys
really sorry for the poor quality pictures, but i think they are enough to surmise this came out greatShow Image(http://i.imgur.com/6X6P3Qo.jpg)Show Image(http://i.imgur.com/KINIca0.jpg)Show Image(http://i.imgur.com/lEfKuVk.jpg)
shipping to us tomorrow
ill take glory shots as soon as we have them on hand, and they will be shipped out immediately
hey guys
really sorry for the poor quality pictures, but i think they are enough to surmise this came out greatShow Image(http://i.imgur.com/6X6P3Qo.jpg)Show Image(http://i.imgur.com/KINIca0.jpg)Show Image(http://i.imgur.com/lEfKuVk.jpg)
shipping to us tomorrow
ill take glory shots as soon as we have them on hand, and they will be shipped out immediately
Excitement overload, waay better than the renders, jesus o.0! Must touch them
hey guys
really sorry for the poor quality pictures, but i think they are enough to surmise this came out greatShow Image(http://i.imgur.com/6X6P3Qo.jpg)Show Image(http://i.imgur.com/KINIca0.jpg)Show Image(http://i.imgur.com/lEfKuVk.jpg)
shipping to us tomorrow
ill take glory shots as soon as we have them on hand, and they will be shipped out immediately
my god these are amazing looking I'm with punks must nuzzle the semi matte texture 8) do you have a board planned for this Punks ? So beautiful thanks for selling me a set late bunnyhey guys
really sorry for the poor quality pictures, but i think they are enough to surmise this came out greatShow Image(http://i.imgur.com/6X6P3Qo.jpg)Show Image(http://i.imgur.com/KINIca0.jpg)Show Image(http://i.imgur.com/lEfKuVk.jpg)
shipping to us tomorrow
ill take glory shots as soon as we have them on hand, and they will be shipped out immediately
Excitement overload, waay better than the renders, jesus o.0! Must touch them
hey guys
really sorry for the poor quality pictures, but i think they are enough to surmise this came out greatShow Image(http://i.imgur.com/6X6P3Qo.jpg)Show Image(http://i.imgur.com/KINIca0.jpg)Show Image(http://i.imgur.com/lEfKuVk.jpg)
shipping to us tomorrow
ill take glory shots as soon as we have them on hand, and they will be shipped out immediately
hey guys
really sorry for the poor quality pictures, but i think they are enough to surmise this came out greatShow Image(http://i.imgur.com/6X6P3Qo.jpg)Show Image(http://i.imgur.com/KINIca0.jpg)Show Image(http://i.imgur.com/lEfKuVk.jpg)
shipping to us tomorrow
ill take glory shots as soon as we have them on hand, and they will be shipped out immediately
Excitement overload, waay better than the renders, jesus o.0! Must touch them
what you trying to say about our mockups bro
hehe
hey guys
really sorry for the poor quality pictures, but i think they are enough to surmise this came out greatShow Image(http://i.imgur.com/6X6P3Qo.jpg)Show Image(http://i.imgur.com/KINIca0.jpg)Show Image(http://i.imgur.com/lEfKuVk.jpg)
shipping to us tomorrow
ill take glory shots as soon as we have them on hand, and they will be shipped out immediately
Good to know, thanks Bunny!
I am surprised, they look pretty shiny. I thought semi-matte would be less shiny.
Looking forward to have it on board! :D
If everything goes smooth should we expect a delivery by the end of the month or the beginning of the next?
hey guys
really sorry for the poor quality pictures, but i think they are enough to surmise this came out greatShow Image(http://i.imgur.com/6X6P3Qo.jpg)Show Image(http://i.imgur.com/KINIca0.jpg)Show Image(http://i.imgur.com/lEfKuVk.jpg)
shipping to us tomorrow
ill take glory shots as soon as we have them on hand, and they will be shipped out immediately
hey guys
really sorry for the poor quality pictures, but i think they are enough to surmise this came out greatShow Image(http://i.imgur.com/6X6P3Qo.jpg)Show Image(http://i.imgur.com/KINIca0.jpg)Show Image(http://i.imgur.com/lEfKuVk.jpg)
shipping to us tomorrow
ill take glory shots as soon as we have them on hand, and they will be shipped out immediately
Really looking forward to getting these!
hey guys
really sorry for the poor quality pictures, but i think they are enough to surmise this came out greatShow Image(http://i.imgur.com/6X6P3Qo.jpg)Show Image(http://i.imgur.com/KINIca0.jpg)Show Image(http://i.imgur.com/lEfKuVk.jpg)
shipping to us tomorrow
ill take glory shots as soon as we have them on hand, and they will be shipped out immediately
Good to know, thanks Bunny!
I am surprised, they look pretty shiny. I thought semi-matte would be less shiny.
Looking forward to have it on board! :D
If everything goes smooth should we expect a delivery by the end of the month or the beginning of the next?
everything is prepped for these, so they will go out as soon as we get them
also, semi matte you can basically read as the word gloss, they are very very glossy, i voted for matte but was overruled
all that being said, the poor picture and light are causing the shine in the pics, they have the same finish as penumbra if you wanna check out some pics of that
this is the only pic i have to hand sadlyShow Image(http://i.imgur.com/CGlzjJs.jpg)
hey guys
really sorry for the poor quality pictures, but i think they are enough to surmise this came out greatShow Image(http://i.imgur.com/6X6P3Qo.jpg)Show Image(http://i.imgur.com/KINIca0.jpg)Show Image(http://i.imgur.com/lEfKuVk.jpg)
shipping to us tomorrow
ill take glory shots as soon as we have them on hand, and they will be shipped out immediately
Really looking forward to getting these!
me too
gonna look swanky on my jd40 and jd45
hey guys
really sorry for the poor quality pictures, but i think they are enough to surmise this came out greatShow Image(http://i.imgur.com/6X6P3Qo.jpg)Show Image(http://i.imgur.com/KINIca0.jpg)Show Image(http://i.imgur.com/lEfKuVk.jpg)
shipping to us tomorrow
ill take glory shots as soon as we have them on hand, and they will be shipped out immediately
Really looking forward to getting these!
me too
gonna look swanky on my jd40 and jd45
I need to pay someone to build my JD45 don't wanna mess up the board considering I have no soldering skills.
Yea but I would much rather have a functioning board than chance destroying it.hey guys
really sorry for the poor quality pictures, but i think they are enough to surmise this came out greatShow Image(http://i.imgur.com/6X6P3Qo.jpg)Show Image(http://i.imgur.com/KINIca0.jpg)Show Image(http://i.imgur.com/lEfKuVk.jpg)
shipping to us tomorrow
ill take glory shots as soon as we have them on hand, and they will be shipped out immediately
Really looking forward to getting these!
me too
gonna look swanky on my jd40 and jd45
I need to pay someone to build my JD45 don't wanna mess up the board considering I have no soldering skills.
it could be the opportunity to learn.
Yea but I would much rather have a functioning board than chance destroying it.hey guys
really sorry for the poor quality pictures, but i think they are enough to surmise this came out greatShow Image(http://i.imgur.com/6X6P3Qo.jpg)Show Image(http://i.imgur.com/KINIca0.jpg)Show Image(http://i.imgur.com/lEfKuVk.jpg)
shipping to us tomorrow
ill take glory shots as soon as we have them on hand, and they will be shipped out immediately
Really looking forward to getting these!
me too
gonna look swanky on my jd40 and jd45
I need to pay someone to build my JD45 don't wanna mess up the board considering I have no soldering skills.
it could be the opportunity to learn.
hey guys
really sorry for the poor quality pictures, but i think they are enough to surmise this came out greatShow Image(http://i.imgur.com/6X6P3Qo.jpg)Show Image(http://i.imgur.com/KINIca0.jpg)Show Image(http://i.imgur.com/lEfKuVk.jpg)
shipping to us tomorrow
ill take glory shots as soon as we have them on hand, and they will be shipped out immediately
hey guys
really sorry for the poor quality pictures, but i think they are enough to surmise this came out greatShow Image(http://i.imgur.com/6X6P3Qo.jpg)Show Image(http://i.imgur.com/KINIca0.jpg)Show Image(http://i.imgur.com/lEfKuVk.jpg)
shipping to us tomorrow
ill take glory shots as soon as we have them on hand, and they will be shipped out immediately
hey guys
really sorry for the poor quality pictures, but i think they are enough to surmise this came out greatShow Image(http://i.imgur.com/6X6P3Qo.jpg)Show Image(http://i.imgur.com/KINIca0.jpg)Show Image(http://i.imgur.com/lEfKuVk.jpg)
shipping to us tomorrow
ill take glory shots as soon as we have them on hand, and they will be shipped out immediately
Looks amazing! Now I'm super crabby that the Lambda keys sold out before I had a chance to order one!
I need to pay someone to build my JD45 don't wanna mess up the board considering I have no soldering skills.
hey guys
really sorry for the poor quality pictures, but i think they are enough to surmise this came out greatShow Image(http://i.imgur.com/6X6P3Qo.jpg)Show Image(http://i.imgur.com/KINIca0.jpg)Show Image(http://i.imgur.com/lEfKuVk.jpg)
shipping to us tomorrow
ill take glory shots as soon as we have them on hand, and they will be shipped out immediately
orange, Orange, ORange, ORAnge, ORANge, ORANGe, ORANGE!!!
I'M READY!!!Show Image(http://i.imgur.com/MHvi2gD.jpg)
hey guys
really sorry for the poor quality pictures, but i think they are enough to surmise this came out greatShow Image(http://i.imgur.com/6X6P3Qo.jpg)Show Image(http://i.imgur.com/KINIca0.jpg)Show Image(http://i.imgur.com/lEfKuVk.jpg)
shipping to us tomorrow
ill take glory shots as soon as we have them on hand, and they will be shipped out immediately
orange, Orange, ORange, ORAnge, ORANge, ORANGe, ORANGE!!!
I'M READY!!!Show Image(http://i.imgur.com/MHvi2gD.jpg)Show Image(http://i.imgur.com/nrHl9X6.jpg)
Speaking of OJ stuff to match this set...
Tekmats4lyfe amirite
hey guys
really sorry for the poor quality pictures, but i think they are enough to surmise this came out greatShow Image(http://i.imgur.com/6X6P3Qo.jpg)Show Image(http://i.imgur.com/KINIca0.jpg)Show Image(http://i.imgur.com/lEfKuVk.jpg)
shipping to us tomorrow
ill take glory shots as soon as we have them on hand, and they will be shipped out immediately
hey guys
really sorry for the poor quality pictures, but i think they are enough to surmise this came out greatShow Image(http://i.imgur.com/6X6P3Qo.jpg)Show Image(http://i.imgur.com/KINIca0.jpg)Show Image(http://i.imgur.com/lEfKuVk.jpg)
shipping to us tomorrow
ill take glory shots as soon as we have them on hand, and they will be shipped out immediately
orange, Orange, ORange, ORAnge, ORANge, ORANGe, ORANGE!!!
I'M READY!!!Show Image(http://i.imgur.com/MHvi2gD.jpg)Show Image(http://i.imgur.com/nrHl9X6.jpg)
Speaking of OJ stuff to match this set...
Tekmats4lyfe amirite
MY ORANGE IS READY
I actually bought a new board (KUL) for this set, and hunted these caps specifically for this keyset... I can see the light at the end of the tunnel, so looking forward to putting it all together...
hey guys
really sorry for the poor quality pictures, but i think they are enough to surmise this came out greatShow Image(http://i.imgur.com/6X6P3Qo.jpg)Show Image(http://i.imgur.com/KINIca0.jpg)Show Image(http://i.imgur.com/lEfKuVk.jpg)
shipping to us tomorrow
ill take glory shots as soon as we have them on hand, and they will be shipped out immediately
Excitement overload, waay better than the renders, jesus o.0! Must touch them
what you trying to say about our mockups bro
hehe
...See those 4 Geek Hack keys? On a row 3 set you only need 2 as you can put them anywhere. That row 4 1x FN key? Won't be perfect on the bottom row. Row 2 backspace alternatives? Won't fit on the number row...
It makes me wonder why anyone would choose to make an SA set with all row 3.
hey guys
really sorry for the poor quality pictures, but i think they are enough to surmise this came out greatMoreShow Image(http://i.imgur.com/6X6P3Qo.jpg)Show Image(http://i.imgur.com/KINIca0.jpg)Show Image(http://i.imgur.com/lEfKuVk.jpg)
shipping to us tomorrow
ill take glory shots as soon as we have them on hand, and they will be shipped out immediately
These are gorgeous....I don't know what to do with them! I don't have a board right now that can live up to these keys. What to do?I have a hand-wired 65 key that I'm building just for this set.
What are your plans for these keys? Tell me about your fabulous build plans.
I was thinking maybe it's time to build an mx mini, or a phantom. Maybe the Orion V2 ... But.... My wallet....what to do!?
hey guys
really sorry for the poor quality pictures, but i think they are enough to surmise this came out greatShow Image(http://i.imgur.com/6X6P3Qo.jpg)Show Image(http://i.imgur.com/KINIca0.jpg)Show Image(http://i.imgur.com/lEfKuVk.jpg)
shipping to us tomorrow
ill take glory shots as soon as we have them on hand, and they will be shipped out immediately
These are gorgeous....I don't know what to do with them! I don't have a board right now that can live up to these keys. What to do?
What are your plans for these keys? Tell me about your fabulous build plans.
I was thinking maybe it's time to build an mx mini, or a phantom. Maybe the Orion V2 ... But.... My wallet....what to do!?
These are gorgeous....I don't know what to do with them! I don't have a board right now that can live up to these keys. What to do?
What are your plans for these keys? Tell me about your fabulous build plans.
I was thinking maybe it's time to build an mx mini, or a phantom. Maybe the Orion V2 ... But.... My wallet....what to do!?
...
Is the row4 extra shift 1.75x? (otherwise I need to get some blanks, but as far as I see, the keycaps support the infinity layout too)
These are gorgeous....I don't know what to do with them! I don't have a board right now that can live up to these keys. What to do?
What are your plans for these keys? Tell me about your fabulous build plans.
I was thinking maybe it's time to build an mx mini, or a phantom. Maybe the Orion V2 ... But.... My wallet....what to do!?
I'm thinking completely custom, something like this (please excuse inaccurate colours and legends :p)Show Image(http://i.imgur.com/wWhyoja.png)
Was hoping for perfect symmetry and straight columns but if I go ANSI I'll have to use a row 3 shift, and hybrid leaves me with an unused traditional backspace key......
Is the row4 extra shift 1.75x? (otherwise I need to get some blanks, but as far as I see, the keycaps support the infinity layout too)
It is according to the mock up :)
Renders are flat and completely uniform in colour while the real thing is 3D and reflective. The colours look pretty damn close so the renders are great, but they could never compare to the real thing which looks perfect....See those 4 Geek Hack keys? On a row 3 set you only need 2 as you can put them anywhere. That row 4 1x FN key? Won't be perfect on the bottom row. Row 2 backspace alternatives? Won't fit on the number row...
It makes me wonder why anyone would choose to make an SA set with all row 3.
If you're playing about with custom layouts an all row 3 set gets you complete flexibility without duplicating keys which is great, but contour feels better. I (will) have the keys, now I'm going to design a board around them. Seems the best way to do it!
hey guys
really sorry for the poor quality pictures, but i think they are enough to surmise this came out greatMoreShow Image(http://i.imgur.com/6X6P3Qo.jpg)Show Image(http://i.imgur.com/KINIca0.jpg)Show Image(http://i.imgur.com/lEfKuVk.jpg)
shipping to us tomorrow
ill take glory shots as soon as we have them on hand, and they will be shipped out immediately
HHNGNGN!!! <bites hand>
They look amazing! They're more retro than I expected, but I'm definitely not complaining. They bring to mind electric typewriters, electromechanical adding machines, etc.
Renders are flat and completely uniform in colour while the real thing is 3D and reflective. The colours look pretty damn close so the renders are great, but they could never compare to the real thing which looks perfect....See those 4 Geek Hack keys? On a row 3 set you only need 2 as you can put them anywhere. That row 4 1x FN key? Won't be perfect on the bottom row. Row 2 backspace alternatives? Won't fit on the number row...
It makes me wonder why anyone would choose to make an SA set with all row 3.
If you're playing about with custom layouts an all row 3 set gets you complete flexibility without duplicating keys which is great, but contour feels better. I (will) have the keys, now I'm going to design a board around them. Seems the best way to do it!
I'm aware of the issue of SP not having molds for particular sizes and rows for SA but it still seems a shame to make an SA set and not have the SA profile.
MoreThese are gorgeous....I don't know what to do with them! I don't have a board right now that can live up to these keys. What to do?
What are your plans for these keys? Tell me about your fabulous build plans.
I was thinking maybe it's time to build an mx mini, or a phantom. Maybe the Orion V2 ... But.... My wallet....what to do!?
I'm thinking completely custom, something like this (please excuse inaccurate colours and legends :p)Show Image(http://i.imgur.com/wWhyoja.png)
Was hoping for perfect symmetry and straight columns but if I go ANSI I'll have to use a row 3 shift, and hybrid leaves me with an unused traditional backspace key......
Is the row4 extra shift 1.75x? (otherwise I need to get some blanks, but as far as I see, the keycaps support the infinity layout too)
It is according to the mock up :)
Very unique. I'm not sure if I could deal with that offset but I'd like to see it made :) Just a shame that arrow cluster is all row 4.
I wasn't talking about a lack of molds but duplication - on closer inspection this kit has 5 geek hack keys and 3 escapes, these 5 duplicate slots could have been used to make 2 1x ctrls and a second 1x alt and shift adding matrix support at no extra cost to the buyer. More layouts covered = more buyers = lower cost (in standard PMK group buy format) so I can see why people are tempted to do it.MoreRenders are flat and completely uniform in colour while the real thing is 3D and reflective. The colours look pretty damn close so the renders are great, but they could never compare to the real thing which looks perfect....See those 4 Geek Hack keys? On a row 3 set you only need 2 as you can put them anywhere. That row 4 1x FN key? Won't be perfect on the bottom row. Row 2 backspace alternatives? Won't fit on the number row...
It makes me wonder why anyone would choose to make an SA set with all row 3.
If you're playing about with custom layouts an all row 3 set gets you complete flexibility without duplicating keys which is great, but contour feels better. I (will) have the keys, now I'm going to design a board around them. Seems the best way to do it!
I'm aware of the issue of SP not having molds for particular sizes and rows for SA but it still seems a shame to make an SA set and not have the SA profile.
To me that's like only buying one type of Lego piece. Yes can build things with just one block type, but the different ones make it more versatile and interesting.
hey guys
really sorry for the poor quality pictures, but i think they are enough to surmise this came out greatShow Image(http://i.imgur.com/6X6P3Qo.jpg)Show Image(http://i.imgur.com/KINIca0.jpg)Show Image(http://i.imgur.com/lEfKuVk.jpg)
shipping to us tomorrow
ill take glory shots as soon as we have them on hand, and they will be shipped out immediately
hey guys
really sorry for the poor quality pictures, but i think they are enough to surmise this came out greatShow Image(http://i.imgur.com/6X6P3Qo.jpg)Show Image(http://i.imgur.com/KINIca0.jpg)Show Image(http://i.imgur.com/lEfKuVk.jpg)
shipping to us tomorrow
ill take glory shots as soon as we have them on hand, and they will be shipped out immediately
Oh my those look good. Was going to put in a planck build but those modifiers are all beautiful!
Do you have a layout where all the profiles are the same? I would like to try them on my Planck but I can't see how to get them to fit. Escpecially with the row 4 arrow cluster :( :(
Hack'd arrived today, I will begin shipping it out as soon as tonight.Show Image(http://i.imgur.com/dAXzUF3.jpg)
Happy 420 everyone! :D
Hack'd arrived today, I will begin shipping it out as soon as tonight.Show Image(http://i.imgur.com/dAXzUF3.jpg)
Happy 420 everyone! :D
Hack'd arrived today, I will begin shipping it out as soon as tonight.Show Image(http://i.imgur.com/dAXzUF3.jpg)
Happy 420 everyone! :D
Hack'd arrived today, I will begin shipping it out as soon as tonight.Show Image(http://i.imgur.com/dAXzUF3.jpg)
Happy 420 everyone! :D
....and now I want a 60%. :D
Pretty please show a pic from the side... I'd like to see how full contour SA caps look from the side, on a low-profile case like this.
Hack'd arrived today, I will begin shipping it out as soon as tonight.Show Image(http://i.imgur.com/dAXzUF3.jpg)
Happy 420 everyone! :D
Hey Cody or Bunny I bought into the sale after it closed and just want to make sure that you guys have me on your list as I never received a confirmation for ctrlalt. Thanks alot for doing this so much hype !!!!!!
Thanks for the confirmation bunny that's all I was wondering :thumb: thanks a lot all and I'm super excited ... Also thanks for answering all my questions the other day bunnz I know your a busy guy! Cody take time with your kids Wednesdays cool for me :)Hey Cody or Bunny I bought into the sale after it closed and just want to make sure that you guys have me on your list as I never received a confirmation for ctrlalt. Thanks alot for doing this so much hype !!!!!!
you will only get a confirmation if you ordered through the site
i have you down though so itll be sorted out for you, and ill be able to give you tracking once its out
dont quote me on this but i think cody has daddy duties today so most likely this buy will all be shipped on wednesday, but as i say, wait until i speak to cody to take that as gospal
Hack'd arrived today, I will begin shipping it out as soon as tonight.Show Image(http://i.imgur.com/dAXzUF3.jpg)
Happy 420 everyone! :D
....and now I want a 60%. :D
Pretty please show a pic from the side... I'd like to see how full contour SA caps look from the side, on a low-profile case like this.
Hack'd arrived today, I will begin shipping it out as soon as tonight.Show Image(http://i.imgur.com/dAXzUF3.jpg)
Happy 420 everyone! :D
Oh yeah baby! Looking forward to get my hand on it for sure! :D
EDIT: Are you the one in charge of shipping to Europe as well or is it Bunny? I know the answer has been given but I forgot it ...
Alright cool. Thanks for the answer. Looking forward to have it on my board!Hack'd arrived today, I will begin shipping it out as soon as tonight.Show Image(http://i.imgur.com/dAXzUF3.jpg)
Happy 420 everyone! :D
....and now I want a 60%. :D
Pretty please show a pic from the side... I'd like to see how full contour SA caps look from the side, on a low-profile case like this.
I will be attempting some better pictures soon. :DHack'd arrived today, I will begin shipping it out as soon as tonight.Show Image(http://i.imgur.com/dAXzUF3.jpg)
Happy 420 everyone! :D
Oh yeah baby! Looking forward to get my hand on it for sure! :D
EDIT: Are you the one in charge of shipping to Europe as well or is it Bunny? I know the answer has been given but I forgot it ...
I am shipping everything. ;)
stoked on this set, and once i get mine ill get fancy pics up for everyone, although im sure most people will have it before meDoes it take longer to get to UK compared to other European countries? Looking forward to see your pretty pictures!
codys picShow Image(http://i.imgur.com/ej45yVq.jpg)
codys picYUMShow Image(http://i.imgur.com/ej45yVq.jpg)
codys picShow Image(http://i.imgur.com/ej45yVq.jpg)
What is the texture like on this keyset? Is it more like ABS or PBT?
codys picIt is sexy as ****. Gj Cody for the picture and thanks Bunny for sharing it with us. I'll be looking forward to see yours.Show Image(http://i.imgur.com/ej45yVq.jpg)
What was the problem with the mockup? I did like them and I liked them better than the first potato pictures we had. I feel cody's picture is pretty close to the mockup.codys picShow Image(http://i.imgur.com/ej45yVq.jpg)
It's gone from mock up, through potato to proper pic and they just keep looking better. I'm sure they'll look better still in my hand!
Nothing wrong with the mockup, the colours do look pretty damn close to Cody's pic - if the mockup was bad we wouldn't have bought it! But a top down drawing will never look as good as a pic of the actual caps with shiny corners, shadows and a reflection from the plate :)What was the problem with the mockup? I did like them and I liked them better than the first potato pictures we had. I feel cody's picture is pretty close to the mockup.codys picShow Image(http://i.imgur.com/ej45yVq.jpg)
It's gone from mock up, through potato to proper pic and they just keep looking better. I'm sure they'll look better still in my hand!
What keyboard is that in the picture Cody?Gon HHKB in ISO layout. :thumb:
codys picShow Image(http://i.imgur.com/ej45yVq.jpg)
codys picShow Image(http://i.imgur.com/ej45yVq.jpg)
Thanks for the compliments everyone, heres a few more shots.Congrats on reaching perfection.Show Image(http://i.imgur.com/CajHWFm.jpg)Show Image(http://i.imgur.com/EiQtiSB.jpg)Show Image(http://i.imgur.com/QKpbA5B.jpg)
PS: I had a profile shot, but there was a hair/dust in it from the sun, will try again tomorrow! :D
Thanks for the compliments everyone, heres a few more shots.Show Image(http://i.imgur.com/CajHWFm.jpg)Show Image(http://i.imgur.com/EiQtiSB.jpg)Show Image(http://i.imgur.com/QKpbA5B.jpg)
PS: I had a profile shot, but there was a hair/dust in it from the sun, will try again tomorrow! :D
Thanks for the compliments everyone, heres a few more shots.Show Image(http://i.imgur.com/CajHWFm.jpg)Show Image(http://i.imgur.com/EiQtiSB.jpg)Show Image(http://i.imgur.com/QKpbA5B.jpg)
PS: I had a profile shot, but there was a hair/dust in it from the sun, will try again tomorrow! :D
codys picShow Image(http://i.imgur.com/ej45yVq.jpg)
Ah, if only we all had as nice a board as that to put them on.
Thanks for the compliments everyone, heres a few more shots.Beautiful pictures Cody! Damn I wish they arrive instantly! :DShow Image(http://i.imgur.com/CajHWFm.jpg)Show Image(http://i.imgur.com/EiQtiSB.jpg)Show Image(http://i.imgur.com/QKpbA5B.jpg)
PS: I had a profile shot, but there was a hair/dust in it from the sun, will try again tomorrow! :D
cody is eating breakfast then off to ctrl alt headquarters to ship for day, should be able to get this buy wrapped up in one sitting
im gonna go through the thread now, and pick a couple of people out to throw in a ctrl alt tshirt, and pick 5 or 10 or so to also get one of our new keychains, just to say thanks to the epople keeping the thread active, and showing their support
anyone who wants a tshirt, feel free to make my life easy and post your size below
Large me me me yea I would love a ctrl alt pajama shirt thanks BUNNY you the best ! I have had a rough couple of days so that put a smile on my face!cody is eating breakfast then off to ctrl alt headquarters to ship for day, should be able to get this buy wrapped up in one sitting
im gonna go through the thread now, and pick a couple of people out to throw in a ctrl alt tshirt, and pick 5 or 10 or so to also get one of our new keychains, just to say thanks to the epople keeping the thread active, and showing their support
anyone who wants a tshirt, feel free to make my life easy and post your size belowShow Image(http://upload.wikimedia.org/wikipedia/en/f/f8/Excitebike_cover.jpg)
Thanks for the freebies!
cody is eating breakfast then off to ctrl alt headquarters to ship for day, should be able to get this buy wrapped up in one sitting
im gonna go through the thread now, and pick a couple of people out to throw in a ctrl alt tshirt, and pick 5 or 10 or so to also get one of our new keychains, just to say thanks to the epople keeping the thread active, and showing their support
anyone who wants a tshirt, feel free to make my life easy and post your size below
Thanks for the compliments everyone, heres a few more shots.Show Image(http://i.imgur.com/CajHWFm.jpg)Show Image(http://i.imgur.com/EiQtiSB.jpg)Show Image(http://i.imgur.com/QKpbA5B.jpg)
PS: I had a profile shot, but there was a hair/dust in it from the sun, will try again tomorrow! :D
BunnyLake:
Large, but do I understand correctly that they will be up on the site for direct purchase...?
Can't wait for the set.
god I loved that game ! I'm going to try and find my old NES on my next day off as I've been feeling super nostalgic lately 8P hopefully the jimmy the cartridge up and down and blow like hell into the NES remedy will still work :eek:cody is eating breakfast then off to ctrl alt headquarters to ship for day, should be able to get this buy wrapped up in one sitting
im gonna go through the thread now, and pick a couple of people out to throw in a ctrl alt tshirt, and pick 5 or 10 or so to also get one of our new keychains, just to say thanks to the epople keeping the thread active, and showing their support
anyone who wants a tshirt, feel free to make my life easy and post your size belowShow Image(http://upload.wikimedia.org/wikipedia/en/f/f8/Excitebike_cover.jpg)
Thanks for the freebies!
Mens Medium!
cody is eating breakfast then off to ctrl alt headquarters to ship for day, should be able to get this buy wrapped up in one sitting
im gonna go through the thread now, and pick a couple of people out to throw in a ctrl alt tshirt, and pick 5 or 10 or so to also get one of our new keychains, just to say thanks to the epople keeping the thread active, and showing their support
anyone who wants a tshirt, feel free to make my life easy and post your size below
So a big box of these is leaving the US heading to bunny today? The postal system will have to be running perfectly smoothly for them to arrive here on my birthday but stranger things have happened. Here's hoping Cody put a $10 value on the package so customs don't get involved :))
Mine's a large if I get lucky, thanks to you both!
Great! That should shave a couple of days off the delivery time :thumb:So a big box of these is leaving the US heading to bunny today? The postal system will have to be running perfectly smoothly for them to arrive here on my birthday but stranger things have happened. Here's hoping Cody put a $10 value on the package so customs don't get involved :))
Mine's a large if I get lucky, thanks to you both!
nope
all shipping from the us this time, so the package will be leaving the us to go to you
Thanks for the compliments everyone, heres a few more shots.Show Image(http://i.imgur.com/QKpbA5B.jpg)
PS: I had a profile shot, but there was a hair/dust in it from the sun, will try again tomorrow! :D
Thanks for the compliments everyone, heres a few more shots.Show Image(http://i.imgur.com/CajHWFm.jpg)Show Image(http://i.imgur.com/EiQtiSB.jpg)Show Image(http://i.imgur.com/QKpbA5B.jpg)
PS: I had a profile shot, but there was a hair/dust in it from the sun, will try again tomorrow! :D
Super excited to see these shipping. I was originally going to put these on my poker II but I just picked up a novatouch last week and love the Topre keys. I know i will love it even more with the "Hack'd by Geeks" Keyset.
Oh yeah, got my shipping notification. :D
Oh yeah, got my shipping notification. :D
I like how you're just in the queue with the rest of us.
:thumb: .... I just want to say thank you to everyone involved and thanks JD I don't think I've thanked you yet bust she is a beauty !Oh yeah, got my shipping notification. :D
I like how you're just in the queue with the rest of us.
front of the queue
cody had to go to a meeting and such but is back now so notifications are about to start rolling out
cody is eating breakfast then off to ctrl alt headquarters to ship for day, should be able to get this buy wrapped up in one sitting
im gonna go through the thread now, and pick a couple of people out to throw in a ctrl alt tshirt, and pick 5 or 10 or so to also get one of our new keychains, just to say thanks to the epople keeping the thread active, and showing their support
anyone who wants a tshirt, feel free to make my life easy and post your size below
cody is eating breakfast then off to ctrl alt headquarters to ship for day, should be able to get this buy wrapped up in one sitting
im gonna go through the thread now, and pick a couple of people out to throw in a ctrl alt tshirt, and pick 5 or 10 or so to also get one of our new keychains, just to say thanks to the epople keeping the thread active, and showing their support
anyone who wants a tshirt, feel free to make my life easy and post your size below
I can't resist buying a Tex Orange 60% case to go with this set, what do you guys think?
Bronze / Silver / Dark Green are some other options, but I think orange might go well, but it's a bold/risky color in general
I can't resist buying a Tex Orange 60% case to go with this set, what do you guys think?
Bronze / Silver / Dark Green are some other options, but I think orange might go well, but it's a bold/risky color in general
I think it would look like the Cody's GON HHKB, don't you think? In terms of color I mean.
I can't resist buying a Tex Orange 60% case to go with this set, what do you guys think?
Bronze / Silver / Dark Green are some other options, but I think orange might go well, but it's a bold/risky color in general
I think it would look like the Cody's GON HHKB, don't you think? In terms of color I mean.
That was my inspiration, but I'm not sure whether the shade of the tex case would agree :)
Hard to speculate from the online pictures: http://imgur.com/a/3yroA - in my case, the plate is going to be stainless steel, so I'm not entirely sure how the setup would turn out :)
A silver case seems more risk-free, however an orange one could be more rewarding
Infinity, with a 1u DEL in the top right corner
Even with the flexibility of the hack'd by geeks set, it seems I will have to mix some rows, probably only the Esc/Del at the top row, so it could turn out interesting, they will both be row2 instead of row1 (there is a row1 esc, but it seems like a good idea to use the row2 one to accompany the row2 del :)
...
Show Image(http://i.imgur.com/IQWxnsJ.png)
Show Image(http://i.imgur.com/IQWxnsJ.png)
I paid through paypal so i have a feeling im not in the HBG system for autoupdates,
Hoping this randomly pops up in my mailbox next week :D
Orange Tex case looks good with raw stainless plate.Show Image(http://i.imgur.com/BBB5nSG.jpg)
Case, caps, and rest are three different shades of orange, but still look nice together. :)
Show Image(http://i.imgur.com/IQWxnsJ.png)
I paid through paypal so i have a feeling im not in the HBG system for autoupdates,
Hoping this randomly pops up in my mailbox next week :D
i sorted you out an order on the site good sir
order #175125 so you will get yoru tracking via email
Can I have an order number too please bunny? I missed the last pretty Hack'd e-mail :(
Show Image(http://i.imgur.com/IQWxnsJ.png)
I paid through paypal so i have a feeling im not in the HBG system for autoupdates,
Hoping this randomly pops up in my mailbox next week :D
i sorted you out an order on the site good sir
order #175125 so you will get yoru tracking via email
Appreciate it! I have some issues with mail disappearing from my mailbox recently so i have been vigilant with meeting the postman outside as its delivered. Thanks dude!
Fair enough, will do. Thanks :)Can I have an order number too please bunny? I missed the last pretty Hack'd e-mail :(
we cant add them in after the fact sadly sir, hipster sorted his order out privately, but it was during the buy period
but once i post the pm orders have been shipped here sir, shoot me a pm and i can get you tracking
Show Image(http://i.imgur.com/IQWxnsJ.png)
I paid through paypal so i have a feeling im not in the HBG system for autoupdates,
Hoping this randomly pops up in my mailbox next week :D
i sorted you out an order on the site good sir
order #175125 so you will get yoru tracking via email
Appreciate it! I have some issues with mail disappearing from my mailbox recently so i have been vigilant with meeting the postman outside as its delivered. Thanks dude!
fingers crossed for my copy of deja lol
Show Image(http://i.imgur.com/IQWxnsJ.png)
I paid through paypal so i have a feeling im not in the HBG system for autoupdates,
Hoping this randomly pops up in my mailbox next week :D
i sorted you out an order on the site good sir
order #175125 so you will get yoru tracking via email
Appreciate it! I have some issues with mail disappearing from my mailbox recently so i have been vigilant with meeting the postman outside as its delivered. Thanks dude!
fingers crossed for my copy of deja lol
Happy to hear you were able to get a copy.
Show Image(http://i.imgur.com/IQWxnsJ.png)
I paid through paypal so i have a feeling im not in the HBG system for autoupdates,
Hoping this randomly pops up in my mailbox next week :D
i sorted you out an order on the site good sir
order #175125 so you will get yoru tracking via email
Appreciate it! I have some issues with mail disappearing from my mailbox recently so i have been vigilant with meeting the postman outside as its delivered. Thanks dude!
fingers crossed for my copy of deja lol
Happy to hear you were able to get a copy.
an incredibly expensive ebay copy that punks is being kind enough to proxy for me
Show Image(http://i.imgur.com/IQWxnsJ.png)
I paid through paypal so i have a feeling im not in the HBG system for autoupdates,
Hoping this randomly pops up in my mailbox next week :D
i sorted you out an order on the site good sir
order #175125 so you will get yoru tracking via email
Appreciate it! I have some issues with mail disappearing from my mailbox recently so i have been vigilant with meeting the postman outside as its delivered. Thanks dude!
fingers crossed for my copy of deja lol
Show Image(http://i.imgur.com/IQWxnsJ.png)
I paid through paypal so i have a feeling im not in the HBG system for autoupdates,
Hoping this randomly pops up in my mailbox next week :D
i sorted you out an order on the site good sir
order #175125 so you will get yoru tracking via email
Appreciate it! I have some issues with mail disappearing from my mailbox recently so i have been vigilant with meeting the postman outside as its delivered. Thanks dude!
fingers crossed for my copy of deja lol
Its on its way, ebay wont give me a tracking number but updates locations,
Dont worry ill be out front in a lawn chair waiting for it :thumb:
****ing media mail bro, dude wouldnt let me upgrade to faster shipping
Watching my email and order statusShow Image(http://www.reactiongifs.com/wp-content/uploads/2012/06/waiting.gif)
just spoke to cody, he is watching his daughter all day today, he said he will try and wrap this up tonight, but if he cant, itll definately be finished over the weekend, once he starts ill throw another post up
just spoke to cody, he is watching his daughter all day today, he said he will try and wrap this up tonight, but if he cant, itll definately be finished over the weekend, once he starts ill throw another post up
Thanks! Daughters are more important so I won't hold my breath :p
The 2.25/2.75 shifts seem to be row3, yet the additional 1.75 shift looks like it's row4, is this the case?
Couldn't wrap my head around the height logic from the layout here: https://ctrlalt.io/buys/hack-d-by-geeks
Hoping the 1.75 shift is also row3, that would serve the symmetry well
BunnyLake - I purchased one of the extra sets you had. I'm all paid up. Am I also part of this batch shipping? Super excited
sorry guys, havent been around all day and im a bit backed up on pms
about 70% of this has shipped, and has already been dropped to the post office
the remainder of the orders made on the site are being packed and shipped now and should all be completed tonight, and pm orders will follow shortly after
I just received my set. Looks great! However, it seems as if the right shift key's stem has an issue. The shift key is slightly tilted in the plane of the keyboard, about -2 degrees tilt. Small but enough for me to notice. Possibly a manufacturing defect?
I just received my set. Looks great! However, it seems as if the right shift key's stem has an issue. The shift key is slightly tilted in the plane of the keyboard, about -2 degrees tilt. Small but enough for me to notice. Possibly a manufacturing defect?
hey sir
sorry to hear that, if you could please take some pics of the issue and pm them to me, i dont have a set o nhand yet but ill get cody to compare it for me to what he has, if its a single key fault ill get it replaced for you, if its a more widespread issue ill speak to sp and see what can be done
I just received my set. Looks great! However, it seems as if the right shift key's stem has an issue. The shift key is slightly tilted in the plane of the keyboard, about -2 degrees tilt. Small but enough for me to notice. Possibly a manufacturing defect?
hey sir
sorry to hear that, if you could please take some pics of the issue and pm them to me, i dont have a set o nhand yet but ill get cody to compare it for me to what he has, if its a single key fault ill get it replaced for you, if its a more widespread issue ill speak to sp and see what can be done
It's no problem. I'll send a pic when I can. Hopefully if anyone else notices this issue they can make a note here too.
I just received my set. Looks great! However, it seems as if the right shift key's stem has an issue. The shift key is slightly tilted in the plane of the keyboard, about -2 degrees tilt. Small but enough for me to notice. Possibly a manufacturing defect?
hey sir
sorry to hear that, if you could please take some pics of the issue and pm them to me, i dont have a set o nhand yet but ill get cody to compare it for me to what he has, if its a single key fault ill get it replaced for you, if its a more widespread issue ill speak to sp and see what can be done
It's no problem. I'll send a pic when I can. Hopefully if anyone else notices this issue they can make a note here too.
just occured to me to mention that the shifts are r3 and the rest of the keys on that row are r4, im assuming you know that and it isnt the issue, but just throwing it out there as something so you can check it against the other shift
I just received my set. Looks great! However, it seems as if the right shift key's stem has an issue. The shift key is slightly tilted in the plane of the keyboard, about -2 degrees tilt. Small but enough for me to notice. Possibly a manufacturing defect?
hey sir
sorry to hear that, if you could please take some pics of the issue and pm them to me, i dont have a set o nhand yet but ill get cody to compare it for me to what he has, if its a single key fault ill get it replaced for you, if its a more widespread issue ill speak to sp and see what can be done
It's no problem. I'll send a pic when I can. Hopefully if anyone else notices this issue they can make a note here too.
just occured to me to mention that the shifts are r3 and the rest of the keys on that row are r4, im assuming you know that and it isnt the issue, but just throwing it out there as something so you can check it against the other shift
The profile is fine. This is what I mean:Show Image(http://i.imgur.com/ztqGjd6.jpg)
And here's the whole ANSI set on my Novatouch:Show Image(http://i.imgur.com/j8GYu7A.jpg)
I had a suspicion that it could be due to SP's SA molds causing the misaligned stem, so I grabbed the long shift from my other SA sets (Pulse and Calm Depths) and compared them on my Novatouch and Royal Kludge. It seems my suspicions may be correct. See for yourself:Show Image(http://i.imgur.com/Yv1JVSN.png)
Left column is Novatouch, Middle Column is Royal Kludge, Top Right is Royal Kludge with stock shift keycap.
Unfortunately I don't have any other MX-compatible keyboards to do more comparisons. Anyone else with multiple SA keysets can test out and compare the long shift keys to see if it's not just me and my keyboards.
That's such an extremity, I've noticed that people just don't pay much attention to keycap alignments / mis-aligned switches/keycaps etc. But obviously the pictures you posted are extreme and very hard not to notice
Very curious what the result is going to be
That's such an extremity, I've noticed that people just don't pay much attention to keycap alignments / mis-aligned switches/keycaps etc. But obviously the pictures you posted are extreme and very hard not to notice
Very curious what the result is going to be
It's only quite noticeable if one looks closely at near top-down angle. I only noticed it because I happened to put just the Enter and Shift key on first.
In any case it's a minor quirk and it doesn't detract from the SA sets as a whole.
I had a suspicion that it could be due to SP's SA molds causing the misaligned stem, so I grabbed the long shift from my other SA sets (Pulse and Calm Depths) and compared them on my Novatouch and Royal Kludge. It seems my suspicions may be correct. See for yourself:Show Image(http://i.imgur.com/Yv1JVSN.png)
Left column is Novatouch, Middle Column is Royal Kludge, Top Right is Royal Kludge with stock shift keycap.
Unfortunately I don't have any other MX-compatible keyboards to do more comparisons. Anyone else with multiple SA keysets can test out and compare the long shift keys to see if it's not just me and my keyboards.
That's such an extremity, I've noticed that people just don't pay much attention to keycap alignments / mis-aligned switches/keycaps etc. But obviously the pictures you posted are extreme and very hard not to notice
Very curious what the result is going to be
It's only quite noticeable if one looks closely at near top-down angle. I only noticed it because I happened to put just the Enter and Shift key on first.
In any case it's a minor quirk and it doesn't detract from the SA sets as a whole.
I had a suspicion that it could be due to SP's SA molds causing the misaligned stem, so I grabbed the long shift from my other SA sets (Pulse and Calm Depths) and compared them on my Novatouch and Royal Kludge. It seems my suspicions may be correct. See for yourself:Show Image(http://i.imgur.com/Yv1JVSN.png)
Left column is Novatouch, Middle Column is Royal Kludge, Top Right is Royal Kludge with stock shift keycap.
Unfortunately I don't have any other MX-compatible keyboards to do more comparisons. Anyone else with multiple SA keysets can test out and compare the long shift keys to see if it's not just me and my keyboards.
also i know this ounds odd
but have you got any non topre mx stem boards to try it on, maybe its a quirk of those boards rather than the set, cause i cant replicate it here
Could be an SP manufactured defect :o . Usually when they pop the key out without waiting for the ABS to fully solidify and remain structurally stable. Maybe due to the vast orders they started ramping up ejection times from the molds so they could finish the job quicker. Seen this type of defect before at a factory in Sydney when they made up for lost time by just throwing out the pieces quickly into a collection bin and before you knew it hundreds of pieces had been deformed in some way.
Get Melissa to speak with the Q/A supervisor to rectify it, by re-making the keys again with stable curing times for each piece.
found a pic i had of calm from ages ago, which also doesnt seem to have the issueShow Image(http://i.imgur.com/ICAZOxU.jpg)
i also found a few crap bag keys and none have the same issue
found a pic i had of calm from ages ago, which also doesnt seem to have the issueShow Image(http://i.imgur.com/ICAZOxU.jpg)
i also found a few crap bag keys and none have the same issue
It's entirely possible my keyboards are the issue. I'm also thinking it might be possible that one of SP's molds have the misalignment such that only certain batches of SA sets have this problem, and I just happened to have sets all made from that mold. Whether other people have this issue with their sets will determine if it's just me or SP.
found a pic i had of calm from ages ago, which also doesnt seem to have the issueShow Image(http://i.imgur.com/ICAZOxU.jpg)
i also found a few crap bag keys and none have the same issue
It's entirely possible my keyboards are the issue. I'm also thinking it might be possible that one of SP's molds have the misalignment such that only certain batches of SA sets have this problem, and I just happened to have sets all made from that mold. Whether other people have this issue with their sets will determine if it's just me or SP.
found a pic i had of calm from ages ago, which also doesnt seem to have the issueShow Image(http://i.imgur.com/ICAZOxU.jpg)
i also found a few crap bag keys and none have the same issue
It's entirely possible my keyboards are the issue. I'm also thinking it might be possible that one of SP's molds have the misalignment such that only certain batches of SA sets have this problem, and I just happened to have sets all made from that mold. Whether other people have this issue with their sets will determine if it's just me or SP.
Probably just some gnomes that come into your house at night and mess stuff up for the sheer fun of it :p
Damn they always hide my undies and socks.found a pic i had of calm from ages ago, which also doesnt seem to have the issueShow Image(http://i.imgur.com/ICAZOxU.jpg)
i also found a few crap bag keys and none have the same issue
It's entirely possible my keyboards are the issue. I'm also thinking it might be possible that one of SP's molds have the misalignment such that only certain batches of SA sets have this problem, and I just happened to have sets all made from that mold. Whether other people have this issue with their sets will determine if it's just me or SP.
Probably just some gnomes that come into your house at night and mess stuff up for the sheer fun of it :p
Damn gnomes messing with my keyboard stuff. Is nothing sacred?
Damn they always hide my undies and socks.found a pic i had of calm from ages ago, which also doesnt seem to have the issueShow Image(http://i.imgur.com/ICAZOxU.jpg)
i also found a few crap bag keys and none have the same issue
It's entirely possible my keyboards are the issue. I'm also thinking it might be possible that one of SP's molds have the misalignment such that only certain batches of SA sets have this problem, and I just happened to have sets all made from that mold. Whether other people have this issue with their sets will determine if it's just me or SP.
Probably just some gnomes that come into your house at night and mess stuff up for the sheer fun of it :p
Damn gnomes messing with my keyboard stuff. Is nothing sacred?
found a pic i had of calm from ages ago, which also doesnt seem to have the issueShow Image(http://i.imgur.com/ICAZOxU.jpg)
i also found a few crap bag keys and none have the same issue
It's entirely possible my keyboards are the issue. I'm also thinking it might be possible that one of SP's molds have the misalignment such that only certain batches of SA sets have this problem, and I just happened to have sets all made from that mold. Whether other people have this issue with their sets will determine if it's just me or SP.
Have you checked any other keys in that position? Not that they will fit perfectly, but you could see if the others are offset as well. That way you know if it is the key or the stem on the board.found a pic i had of calm from ages ago, which also doesnt seem to have the issueShow Image(http://i.imgur.com/ICAZOxU.jpg)
i also found a few crap bag keys and none have the same issue
It's entirely possible my keyboards are the issue. I'm also thinking it might be possible that one of SP's molds have the misalignment such that only certain batches of SA sets have this problem, and I just happened to have sets all made from that mold. Whether other people have this issue with their sets will determine if it's just me or SP.
Probably just some gnomes that come into your house at night and mess stuff up for the sheer fun of it
Damn gnomes messing with my keyboard stuff. Is nothing sacred?
BunnyLake - I purchased one of the extra sets you had. I'm all paid up. Am I also part of this batch shipping? Super excitedsorry guys, havent been around all day and im a bit backed up on pms
about 70% of this has shipped, and has already been dropped to the post office
the remainder of the orders made on the site are being packed and shipped now and should all be completed tonight, and pm orders will follow shortly after
the above post should answer the question adequately enough, however cody didnt get to finish the other 30% last night in the end
so as with the posts i made a few above, thatll either happen tonight or this weekend
Have you checked any other keys in that position? Not that they will fit perfectly, but you could see if the others are offset as well. That way you know if it is the key or the stem on the board.
Have you checked any other keys in that position? Not that they will fit perfectly, but you could see if the others are offset as well. That way you know if it is the key or the stem on the board.
That's a good idea, not sure why I didn't think of that. I just tested out the left shift and enter on the right shift position and they seemed fine. I then tried putting the right shift keycap on the spacebar position, and the skew is still apparent. So this confirms that it's the shift keycap's stem that's the issue, not the keyboard.
Have you checked any other keys in that position? Not that they will fit perfectly, but you could see if the others are offset as well. That way you know if it is the key or the stem on the board.
That's a good idea, not sure why I didn't think of that. I just tested out the left shift and enter on the right shift position and they seemed fine. I then tried putting the right shift keycap on the spacebar position, and the skew is still apparent. So this confirms that it's the shift keycap's stem that's the issue, not the keyboard.
Interesting. So the stem itself is rotated, not the stabs. I doubt the mold is the problem, but it is strange that you have 2 nearly identical misprints. Maybe the cooling/setting process is the culprit of random deformation...
Have you checked any other keys in that position? Not that they will fit perfectly, but you could see if the others are offset as well. That way you know if it is the key or the stem on the board.
That's a good idea, not sure why I didn't think of that. I just tested out the left shift and enter on the right shift position and they seemed fine. I then tried putting the right shift keycap on the spacebar position, and the skew is still apparent. So this confirms that it's the shift keycap's stem that's the issue, not the keyboard.
Interesting. So the stem itself is rotated, not the stabs. I doubt the mold is the problem, but it is strange that you have 2 nearly identical misprints. Maybe the cooling/setting process is the culprit of random deformation...
dont think its just him. also noticed the right shift while i was putting keys on but didn't think much of itShow Image(http://i.imgur.com/QXaC5K6.jpg)
however, I am missing a row 1 "1" key and have an extra row 1 "0" key
otherwise, set looks great :thumb:
did all the shipping notifications go out for PM sales?
did all the shipping notifications go out for PM sales?
no rush, sorry for asking again, im on mobile and totally missed the update :-[
Just got my caps today! Loving them! Didn't get to put them on my board yet though. Slight issues with the numpad 3 key and the left shift. Otherwise though all caps are here.
I also possibly have two extra arrow keys? A down and a right.The arrows are good but you have them both upside-down - one's a backspace and the other is a different row up arrow as it's more comfortable (try it and you'll agree :) )
I also possibly have two extra arrow keys? A down and a right.The arrows are good but you have them both upside-down - one's a backspace and the other is a different row up arrow as it's more comfortable (try it and you'll agree :) )
p.s that USB cable is perfect - where's it from?!
I just checked Calm Depths, PuLSE, Nuclear Data and Hack'd by Geeks and all of mine have a titled right shift. It's extremely bad on the Novatouch but barely noticeable on Cherry stabs. I'm also missing a .> key and have an extra ,< key. Anyone have an extra .> and missing a ,<? I also possibly have two extra arrow keys? A down and a right.Show Image(http://i.imgur.com/wt12anX.png)Show Image(http://i.imgur.com/wnXRdHV.png)Show Image(http://i.imgur.com/GipAwAW.png)
I also possibly have two extra arrow keys? A down and a right.The arrows are good but you have them both upside-down - one's a backspace and the other is a different row up arrow as it's more comfortable (try it and you'll agree :) )
p.s that USB cable is perfect - where's it from?!
I just checked Calm Depths, PuLSE, Nuclear Data and Hack'd by Geeks and all of mine have a titled right shift. It's extremely bad on the Novatouch but barely noticeable on Cherry stabs. I'm also missing a .> key and have an extra ,< key. Anyone have an extra .> and missing a ,<? I also possibly have two extra arrow keys? A down and a right.Show Image(http://i.imgur.com/wt12anX.png)Show Image(http://i.imgur.com/wnXRdHV.png)Show Image(http://i.imgur.com/GipAwAW.png)
sorry about that, sp sort the sets, ill get that key replaced for you
I also possibly have two extra arrow keys? A down and a right.The arrows are good but you have them both upside-down - one's a backspace and the other is a different row up arrow as it's more comfortable (try it and you'll agree :) )
p.s that USB cable is perfect - where's it from?!
Hah! Totally forgot about the 1u backspace. Threw me off since it's the same row as the arrow. Thanks!
Yeah I made the cable. I have three colors I planned on using for Hack'd:MoreShow Image(http://i.imgur.com/S2mGWaO.jpg)MoreShow Image(http://i.imgur.com/YOX1YFS.jpg)MoreShow Image(http://i.imgur.com/wLGJosH.jpg)I just checked Calm Depths, PuLSE, Nuclear Data and Hack'd by Geeks and all of mine have a titled right shift. It's extremely bad on the Novatouch but barely noticeable on Cherry stabs. I'm also missing a .> key and have an extra ,< key. Anyone have an extra .> and missing a ,<? I also possibly have two extra arrow keys? A down and a right.Show Image(http://i.imgur.com/wt12anX.png)Show Image(http://i.imgur.com/wnXRdHV.png)Show Image(http://i.imgur.com/GipAwAW.png)
sorry about that, sp sort the sets, ill get that key replaced for you
Thanks! Should I send the extra ,< to Cody?
Got mine today -- they look awesome on the Novatouch! Thanks, BunnyLake and Cody!
Got mine as well.
The colors and font couldn't look better! :thumb:
Thanks for a great \set Bunny!
*I can confirm having the same issues as everyone else on the right long shift key being crooked on Novatouch.
On another note are the F and J keys meant to be deep dish? Mine are not but I can't remember if they are supposed to be.
On another note are the F and J keys meant to be deep dish? Mine are not but I can't remember if they are supposed to be.
The mockup on CTRLALT would lead me to believe they are supposed to be deep dish. Can anyone confirm? Is there a chance that it is very sleight?
I'm glad this F/J issue occurred, if it's indeed the case, hate deep dishes, didn't pay attention in the first place :)
got the set today. holy moly. so awesome. but... same issue with the right shift being off centered on a v60 with clear switches.Show Image(http://i.imgur.com/mvu40tR.jpg?1)
sorry for bad nexus 5 photo -- better phone and camera are out of commission!
fwiw -- i love this set more than anything. good bye dolch dsa.. you've been real.
got the set today. holy moly. so awesome. but... same issue with the right shift being off centered on a v60 with clear switches.Show Image(http://i.imgur.com/mvu40tR.jpg?1)
sorry for bad nexus 5 photo -- better phone and camera are out of commission!
fwiw -- i love this set more than anything. good bye dolch dsa.. you've been real.
Going off topic, I'm also using a Clear V60 currently, the default keycaps are supposed to be bad, but they are actually very good, they somehow absorb the sounds extremely well
The V60 has very crude cherry stabs, even with modding + clipping + lubing, they are pretty harsh, the friction seems high, I've tested a DSA keycap on the backspace, and ran back to the original keycaps, with the DSA keycap it was impossible not to hear the friction / the stabiliser slide
The question: How are the SA keycaps from this perspective, do they absorb the sounds well, are bottom outs thocky / enjoyable? :)
got the set today. holy moly. so awesome. but... same issue with the right shift being off centered on a v60 with clear switches.Show Image(http://i.imgur.com/mvu40tR.jpg?1)
sorry for bad nexus 5 photo -- better phone and camera are out of commission!
fwiw -- i love this set more than anything. good bye dolch dsa.. you've been real.
Going off topic, I'm also using a Clear V60 currently, the default keycaps are supposed to be bad, but they are actually very good, they somehow absorb the sounds extremely well
The V60 has very crude cherry stabs, even with modding + clipping + lubing, they are pretty harsh, the friction seems high, I've tested a DSA keycap on the backspace, and ran back to the original keycaps, with the DSA keycap it was impossible not to hear the friction / the stabiliser slide
The question: How are the SA keycaps from this perspective, do they absorb the sounds well, are bottom outs thocky / enjoyable? :)
So I didn't even try the stock keycaps. I switched from the DSA Dolch immediately (from a Poker 2.) The DSA Dolch's have WASD blue o-rings. I didn't have any desire to take the rings off for these keys, and surprisingly enough, they are more quiet than the DSA and have more thock. Maybe all the extra space in these keycaps helps with that sound. These keycaps have me rethinking my plans. Might sell my Infinity order, my Pexon 60% case and just buy a new case. v60 + Hack'd + Green or Orange TEX case = happy feelings.
I am also digging the smooth texture of these over the Dolch, as well as the profile. Scattered wine-addled thoughts.
PS. After rereading your question.. the backspace, enter and shift.. still sound a little loose.. but its not as bad as with DSA, IMO.
Thanks for sharing your experience, V60 stabs are ..., however they are easy to get used to
I'm also experiencing similar dilemmas, but I've invested a lot in infinity's, so not backing down :)
Might even buy your order if you decide to sell it
Quote
Thanks for sharing your experience, V60 stabs are ..., however they are easy to get used to
I'm also experiencing similar dilemmas, but I've invested a lot in infinity's, so not backing down :)
Might even buy your order if you decide to sell it
Love soldering. Love the layers I have set up ahead of time for it... but v60 is working well as my daily programming keyboard... Will be a tough call.
Quote
Thanks for sharing your experience, V60 stabs are ..., however they are easy to get used to
I'm also experiencing similar dilemmas, but I've invested a lot in infinity's, so not backing down :)
Might even buy your order if you decide to sell it
Love soldering. Love the layers I have set up ahead of time for it... but v60 is working well as my daily programming keyboard... Will be a tough call.
Haha! I'm at a very similar place, V60 is lovely, it's a keyboard to settle with, yet the keycap sets complicate things a lot
I was ready to use infinity's with DSA keycaps for some time, the sculptured and thick SA's will likely ruin me
Just home from a long day so I'll take better picture later.
But what's this little surprise!
Just home from a long day so I'll take better picture later.Wow!! That keychain is so cool!! Do want!!!! :thumb: :thumb: :thumb:
But what's this little surprise!
I wasn't able to ship last night, but I will be able to ship the remaining orders today and drop them off in the tomorrow (monday) morning.
I also have mondays off now. :D
Just received mine today. ;DWhat 60% keyboard are you using for your daily driver here? Is it a prebuilt, a kit or a homebrew of your own design? I've been looking for a 60% with a relatively flat case, mx-clears, split backspace and split shifts for a while now.
I can finally complete my 60 buildXDDDDDDDDMoreThis is gonna be my new daily driverXDDD
Thanks Bunny!
Just received mine today. ;DWhat 60% keyboard are you using for your daily driver here? Is it a prebuilt, a kit or a homebrew of your own design? I've been looking for a 60% with a relatively flat case, mx-clears, split backspace and split shifts for a while now.
I can finally complete my 60 buildXDDDDDDDDMoreThis is gonna be my new daily driverXDDD
Thanks Bunny!
Just got my email shipping NOTIFICATION :o :o :o :o !!!!
This A-hole has been waiting for this with great enthusiasm and the package is making it's way to this arse-pit country known as Australia.
Should of known that CTRL/ALT always deliver their key-sets before anyone else on this planet. Love them for being so efficient and quick and showing everyone else how it's done :thumb: .
Now comes the great wait through our shipping services especially here in Australia where everything that's shipped to me is thoroughly inspected and checked like I'm importing drugs or illegal implements, the customs rat-bags who seem to target me as their Number One person to harass simply because they can do it.
Despite living here I still get all my CTRL/ALT packages which goes to show no matter the difficulties, nothing stops them from actually sending your keys to every 3rd world nation on the map.
I'm glad this F/J issue occurred, if it's indeed the case, hate deep dishes, didn't pay attention in the first place :)
they did this to us once before on penumbra as well
glad it worked otu for you but many people need them
so ill get sp to knock em out right away
What an amazing set of keycaps.
How does sculptured SA's compare to all row 3 ones?
non-sculptured seems easy to get right in terms of aesthetics/keycap variety, yet from a usability perspective misclicks are more common, from my limited experience with DSA sets
That's why I'm a bit concerned this set is going to bind me to sculptured/thick SA's :) (It's hard to degrade once your standards are elevated)
A swift Penumbra re-run would be perfect at this time :)
How does sculptured SA's compare to all row 3 ones?
non-sculptured seems easy to get right in terms of aesthetics/keycap variety, yet from a usability perspective misclicks are more common, from my limited experience with DSA sets
That's why I'm a bit concerned this set is going to bind me to sculptured/thick SA's :) (It's hard to degrade once your standards are elevated)
A swift Penumbra re-run would be perfect at this time :)
This is my first SA sculpted and wow it's quite satisfying. I think if the deep dish f and j keys get sorted, I would have less misclicks. Definitely agree with SL89 about all row 3 feeling like a tall substantial DSA profile.
hey guys
quick update
sp are replacing the shifts and making the scoops for us
they said they are working on it now so they will be ready soon, how we go about distributing them i dont know yet, but they are being made and replaced and that is great
i have also noticed several orders already with the odd missing key, we also messaged sp about this as it seems a little more than the odd key here and there that we usually get
they said they are of course happy to replace these, however we really need to do the missing keys all at once, so when you get your set, please let me know if there are any keys missing, if so ill be making a list, and once all the sets have arrived, ill get all missing keys ordered from sp together
hey guys
quick update
sp are replacing the shifts and making the scoops for us
they said they are working on it now so they will be ready soon, how we go about distributing them i dont know yet, but they are being made and replaced and that is great
i have also noticed several orders already with the odd missing key, we also messaged sp about this as it seems a little more than the odd key here and there that we usually get
they said they are of course happy to replace these, however we really need to do the missing keys all at once, so when you get your set, please let me know if there are any keys missing, if so ill be making a list, and once all the sets have arrived, ill get all missing keys ordered from sp together
they said they are of course happy to replace these, however we really need to do the missing keys all at once, so when you get your set, please let me know if there are any keys missing, if so ill be making a list, and once all the sets have arrived, ill get all missing keys ordered from sp togetherIs the render on post 1 the complete set (no bonus keys announced along the way )?
Hey everyone, I am nearly complete shipping hack'd. (except pm orders)
Also, some of you will be receiving new tracking numbers.
My daughter broke her leg yesterday so I have been taking care of her and plan on wrapping up as soon as I can (most likely Wednesday or Friday).
Hey everyone, I am nearly complete shipping hack'd. (except pm orders)
Also, some of you will be receiving new tracking numbers.
My daughter broke her leg yesterday so I have been taking care of her and plan on wrapping up as soon as I can (most likely Wednesday or Friday).
My daughter broke her leg yesterday so I have been taking care of her and plan on wrapping up as soon as I can (most likely Wednesday or Friday).
My daughter broke her leg yesterday so I have been taking care of her and plan on wrapping up as soon as I can (most likely Wednesday or Friday).
Girls always recover quickly when you get them a fluffy kitten, so you know what to do now :) ?
Hey everyone, I am nearly complete shipping hack'd. (except pm orders)
Also, some of you will be receiving new tracking numbers.
My daughter broke her leg yesterday so I have been taking care of her and plan on wrapping up as soon as I can (most likely Wednesday or Friday).
Ouch!
Best wishes for a speedy recovery! :)
My daughter broke her leg yesterday so I have been taking care of her and plan on wrapping up as soon as I can (most likely Wednesday or Friday).
Girls always recover quickly when you get them a fluffy kitten, so you know what to do now :) ?
hey guys
quick update
sp are replacing the shifts and making the scoops for us
they said they are working on it now so they will be ready soon, how we go about distributing them i dont know yet, but they are being made and replaced and that is great
i have also noticed several orders already with the odd missing key, we also messaged sp about this as it seems a little more than the odd key here and there that we usually get
they said they are of course happy to replace these, however we really need to do the missing keys all at once, so when you get your set, please let me know if there are any keys missing, if so ill be making a list, and once all the sets have arrived, ill get all missing keys ordered from sp together
Hey everyone, I am nearly complete shipping hack'd. (except pm orders)
Also, some of you will be receiving new tracking numbers.
My daughter broke her leg yesterday so I have been taking care of her and plan on wrapping up as soon as I can (most likely Wednesday or Friday).
Round 5 has me conditioned to be patient. So no rush, I feel like i was the last of the PM orders so I am likely dead last lol. Also +1 on Elrick's cat idea :p
Girls always recover quickly when you get them a fluffy kitten, so you know what to do now :) ?
My Hacked set came in yesterday with my shirt and key chain. Everything looks so amazing I haven't gotten a chance to put it on a board or check the set yet but I took a couple of quick pictures. First off JD, Bunny and Cody thank you so much guys the set looks and feels amazing! I am really impressed on how good it looks. Bunny thank you for the extras ;) I've been working alot and I have had recent car trouble so I have been a little down and out but I just wanted to let you know when I pried open that box and saw the ctralt shirt(love the colors by the way) key chain and most of all the key set I had a grin from ear to ear! Thanks everyone at ctralt and everyone who had something to do with this GB I can't wait to put It on one of my boards :thumb:
Come on, people. Post more keyset pics! Those of us still waiting for ours to ship need to get our fix vicariously through you.
Come on, people. Post more keyset pics! Those of us still waiting for ours to ship need to get our fix vicariously through you.
Come on, people. Post more keyset pics! Those of us still waiting for ours to ship need to get our fix vicariously through you.i know I suck lol I was going to throw it on my poker but I wanted to save it for a TK or something that would show it off a little better than a 60% board :(
Received mine today, they look fantastic! Can't wait to try them out. Thanks all!
That'd be nice if they could fix the shifts. I always thought it was just an issue with their molds or something they couldn't fix. All of my SA sets have the same crooked shift issue. As I mentioned before it seems to be barely noticeable on Cherry stabs though.
Hack'd on V60 (Cherry stabs)Show Image(http://i.imgur.com/wnXRdHV.png?2)
PuLSE on NovatouchShow Image(http://i.imgur.com/BQhEEoA.png)
Calm Depths on Majestouch-2 (Costar stabs)Show Image(http://i.imgur.com/tlSQ0ml.png)
Nuclear Data on V60 (Cherry stabs)Show Image(http://i.imgur.com/3kVo1Ij.png)
That'd be nice if they could fix the shifts. I always thought it was just an issue with their molds or something they couldn't fix. All of my SA sets have the same crooked shift issue. As I mentioned before it seems to be barely noticeable on Cherry stabs though.
Hack'd on V60 (Cherry stabs)Show Image(http://i.imgur.com/wnXRdHV.png?2)
PuLSE on NovatouchShow Image(http://i.imgur.com/BQhEEoA.png)
Calm Depths on Majestouch-2 (Costar stabs)Show Image(http://i.imgur.com/tlSQ0ml.png)
Nuclear Data on V60 (Cherry stabs)Show Image(http://i.imgur.com/3kVo1Ij.png)
Nice pics.
i got my sets today and i have no issue, although i do use cherry and not costar stabs
My Hacked set came in yesterday with my shirt and key chain. Everything looks so amazing I haven't gotten a chance to put it on a board or check the set yet but I took a couple of quick pictures. First off JD, Bunny and Cody thank you so much guys the set looks and feels amazing! I am really impressed on how good it looks. Bunny thank you for the extras ;) I've been working alot and I have had recent car trouble so I have been a little down and out but I just wanted to let you know when I pried open that box and saw the ctralt shirt(love the colors by the way) key chain and most of all the key set I had a grin from ear to ear! Thanks everyone at ctralt and everyone who had something to do with this GB I can't wait to put It on one of my boards :thumb:
I got the set in yesterday(ish)and only had time to snap a quick photo. It looks great, a lot easier on my eyes than the last sculpted SA set I had on here. Hello Hack'd!. Great work JD and [Ctrl]Alt Team! Thanks to everyone involved.Show Image(http://i.imgur.com/mB0HVwU.jpg)
I got the set in yesterday(ish)and only had time to snap a quick photo. It looks great, a lot easier on my eyes than the last sculpted SA set I had on here. Hello Hack'd!. Great work JD and [Ctrl]Alt Team! Thanks to everyone involved.Show Image(http://i.imgur.com/mB0HVwU.jpg)
I got the set in yesterday(ish)and only had time to snap a quick photo. It looks great, a lot easier on my eyes than the last sculpted SA set I had on here. Hello Hack'd!. Great work JD and [Ctrl]Alt Team! Thanks to everyone involved.Show Image(http://i.imgur.com/mB0HVwU.jpg)
I got the set in yesterday(ish)and only had time to snap a quick photo. It looks great, a lot easier on my eyes than the last sculpted SA set I had on here. Hello Hack'd!. Great work JD and [Ctrl]Alt Team! Thanks to everyone involved.This makes me really regret not buying this set.Show Image(http://i.imgur.com/mB0HVwU.jpg)
I got the set in yesterday(ish)and only had time to snap a quick photo. It looks great, a lot easier on my eyes than the last sculpted SA set I had on here. Hello Hack'd!. Great work JD and [Ctrl]Alt Team! Thanks to everyone involved.Show Image(http://i.imgur.com/mB0HVwU.jpg)
Too much regrets between the Hack'd and the CtrlAlt 60 GB. STAHP IT! it will be bad for your health otherwise! Poor Joey.I got the set in yesterday(ish)and only had time to snap a quick photo. It looks great, a lot easier on my eyes than the last sculpted SA set I had on here. Hello Hack'd!. Great work JD and [Ctrl]Alt Team! Thanks to everyone involved.This makes me really regret not buying this set.Show Image(http://i.imgur.com/mB0HVwU.jpg)
I got the set in yesterday(ish)and only had time to snap a quick photo. It looks great, a lot easier on my eyes than the last sculpted SA set I had on here. Hello Hack'd!. Great work JD and [Ctrl]Alt Team! Thanks to everyone involved.Show Image(http://i.imgur.com/mB0HVwU.jpg)
After seeing your post on reddit, I noticed that Hack'd By Geeks ~= Orange Dolch :)
The pictures always sparked a familiarity detection, I managed to label it only after seeing your usage :)
Centered ORANGE (OAS) legends on GREY (GE) and VERY DARK GREY (GX) base, similar to Skidata legends on the Dolch colorway.
Question to Bunny/anyone else in my position: I ordered both GMK Hyperfuse and this set in the same order. Will they ship together (after GMK Hyperfuse finishes) or separately?
Question to Bunny/anyone else in my position: I ordered both GMK Hyperfuse and this set in the same order. Will they ship together (after GMK Hyperfuse finishes) or separately?
Since Hyperfuse isn't ready yet, I believe Bunny mentioned you could ask him for seperate shipping of the 2 sets. You'll end up paying for shipping twice, though.
ps. I'm in the same boat, and I might ask for seperate shipping as well.
After seeing your post on reddit, I noticed that Hack'd By Geeks ~= Orange Dolch :)
After seeing your post on reddit, I noticed that Hack'd By Geeks ~= Orange Dolch :)
Dolcheetos is the term you are looking for :D
After seeing your post on reddit, I noticed that Hack'd By Geeks ~= Orange Dolch :)
Dolcheetos is the term you are looking for :D
Man some of these pics are great, can't wait for my set to arrive. I'm also super jealous of the people who have multiple sets of SA profile keys, this will be my first and I'm expecting to love it.
Btw, I must've been in the 30% of orders Bunny did later and my tracking doesn't seem to have changed, it's just been at "shipping label created" for 4 days now, should I just expect it to show up at some point soon?
Man some of these pics are great, can't wait for my set to arrive. I'm also super jealous of the people who have multiple sets of SA profile keys, this will be my first and I'm expecting to love it.
Btw, I must've been in the 30% of orders Bunny did later and my tracking doesn't seem to have changed, it's just been at "shipping label created" for 4 days now, should I just expect it to show up at some point soon?
the day cody packed the end of the orders up, his daughter broke her leg so he hasnt been back to the office yet
he was gonna try last night but couldnt
its my understanding he is on his way to the office now though to sort the last few pm orders and sort out a few labels, and then get stuff dropped off
Don't get yourself sick. You need rest ^^.Man some of these pics are great, can't wait for my set to arrive. I'm also super jealous of the people who have multiple sets of SA profile keys, this will be my first and I'm expecting to love it.
Btw, I must've been in the 30% of orders Bunny did later and my tracking doesn't seem to have changed, it's just been at "shipping label created" for 4 days now, should I just expect it to show up at some point soon?
the day cody packed the end of the orders up, his daughter broke her leg so he hasnt been back to the office yet
he was gonna try last night but couldnt
its my understanding he is on his way to the office now though to sort the last few pm orders and sort out a few labels, and then get stuff dropped off
This is correct, I've been trying to make it to the office during the nights, but I've needed to rest.
But, I'm on my way to the office now to wrap up. :D
Man some of these pics are great, can't wait for my set to arrive. I'm also super jealous of the people who have multiple sets of SA profile keys, this will be my first and I'm expecting to love it.
Btw, I must've been in the 30% of orders Bunny did later and my tracking doesn't seem to have changed, it's just been at "shipping label created" for 4 days now, should I just expect it to show up at some point soon?
the day cody packed the end of the orders up, his daughter broke her leg so he hasnt been back to the office yet
he was gonna try last night but couldnt
its my understanding he is on his way to the office now though to sort the last few pm orders and sort out a few labels, and then get stuff dropped off
Daughter needs her father more than we need the keycaps!
So enjoy the early years when they actually listen to everything you say and watch everything you do because these are the BEST times in your life, that will never again be repeated.
So enjoy the early years when they actually listen to everything you say and watch everything you do because these are the BEST times in your life, that will never again be repeated.
As the father of a 6 month old and a 2 year old this makes me sad for my future self. :'(
Wrapping up this group buy now, if your tracking number has not updated yet, you will receive a new one soon.Enjoy this time while you can. Soon they'll all be F-122's coming home with dyed keycaps and bolt mods. *sniffle*
And you guys, I spend as much time as I possibily can with my daughter, she is the best and a sweetheart. :D
Here is her posing with my keyboards.Show Image(http://i.imgur.com/iah9pswl.jpg)
(before she fractured her leg)
Enjoy this time while you can. Soon they'll all be F-122's coming home with dyed keycaps and bolt mods. *sniffle*
Show Image(http://i.imgur.com/7aY6RSL.png)
Wrapping up this group buy now, if your tracking number has not updated yet, you will receive a new one soon.
And you guys, I spend as much time as I possibily can with my daughter, she is the best and a sweetheart. :D
Here is her posing with my keyboards.Show Image(http://i.imgur.com/iah9pswl.jpg)
(before she fractured her leg)
Show Image(http://i.imgur.com/7aY6RSL.png)
Show Image(http://i.imgur.com/7aY6RSL.png)
Show Image(http://i.imgur.com/7aY6RSL.png)
Wrapping up this group buy now, if your tracking number has not updated yet, you will receive a new one soon.
And you guys, I spend as much time as I possibily can with my daughter, she is the best and a sweetheart. :D
Here is her posing with my keyboards.Show Image(http://i.imgur.com/iah9pswl.jpg)
(before she fractured her leg)
Show Image(http://i.imgur.com/7aY6RSL.png)
How's the lipped 60% tex case for typing/aesthetics, does the lips bother you, does the aluminium freeze your thumbs or sth?
I put these on my Noppoo Spyder 87 Lolita, and they sound (what a difference) and feel great. Only problem is the spacebar; it is sticky on here and I had to go back to the stock spacebar. Anyone else with this keyboard having the same issues? I didn't see any interference with the other keys. I think it's because of the Cherry style stabilizers. Maybe filing the plastic around the tabs that go into the stabilizer would help?
One other question: which way do the arrow keys go? I have mine all lined up to resemble the DEL/END/PAGE DOWN orientation. Is that correct?
hey guys quick update
we just received the scoops and replacement shifts
i still need to work out what we are gonna do about getting those out to you, but we have them on hand
I put these on my Noppoo Spyder 87 Lolita, and they sound (what a difference) and feel great. Only problem is the spacebar; it is sticky on here and I had to go back to the stock spacebar. Anyone else with this keyboard having the same issues? I didn't see any interference with the other keys. I think it's because of the Cherry style stabilizers. Maybe filing the plastic around the tabs that go into the stabilizer would help?
One other question: which way do the arrow keys go? I have mine all lined up to resemble the DEL/END/PAGE DOWN orientation. Is that correct?
if you take the space bar off sir, and pop 2 little squares you cut out from the baggy the caps come in, a bit smaller than a centimetre square maybe, pop them on the top of the 2 stabs, then push the spacebar down, this normally fixes any space bar issues i have, i actually do it on all my boards now just out of routine more than anything
hey guys quick update
we just received the scoops and replacement shifts
i still need to work out what we are gonna do about getting those out to you, but we have them on hand
Thanks for that Bunny!
hey guys quick update
we just received the scoops and replacement shifts
i still need to work out what we are gonna do about getting those out to you, but we have them on hand
Thanks for that Bunny!
fastest sp turnaround ever
Show Image(http://i.imgur.com/7aY6RSL.png)
hey guys quick update
we just received the scoops and replacement shifts
i still need to work out what we are gonna do about getting those out to you, but we have them on hand
everyone who ordered through the site should have a shipping notification, anyone who ordered via pm wont get a shipping notificationhey guys quick update
we just received the scoops and replacement shifts
i still need to work out what we are gonna do about getting those out to you, but we have them on hand
can you just include mine with my set? i've yet to get a shipping notification so i assume y'all still have it at HQ.
silly me, can i get a shipping number then whenever it goes out, or if it has already gone out then. i need coffee it seems :confused:
I put these on my Noppoo Spyder 87 Lolita, and they sound (what a difference) and feel great. Only problem is the spacebar; it is sticky on here and I had to go back to the stock spacebar. Anyone else with this keyboard having the same issues? I didn't see any interference with the other keys. I think it's because of the Cherry style stabilizers. Maybe filing the plastic around the tabs that go into the stabilizer would help?
One other question: which way do the arrow keys go? I have mine all lined up to resemble the DEL/END/PAGE DOWN orientation. Is that correct?
if you take the space bar off sir, and pop 2 little squares you cut out from the baggy the caps come in, a bit smaller than a centimetre square maybe, pop them on the top of the 2 stabs, then push the spacebar down, this normally fixes any space bar issues i have, i actually do it on all my boards now just out of routine more than anything
A little piece of scotch tape works great too, but I also had to do this on my costar stabilizers (quickfire), and didn't have to apply any tape for cherry stabilizers.
All orders have gone out except ones that are waiting for hyperfuse.
For PM orders, please PM me with the name you provided bunnylake for shipping and I can lookup your tracking number. I will respond to these pms sometime tonight.
Also, any orders that went out today got scoops and new shifts. :)
My order arrived but I am away, so will open it Sunday, but what's with the shifts and "scoops"? Was there a problem with these? What's a scoop?
All orders have gone out except ones that are waiting for hyperfuse.
For PM orders, please PM me with the name you provided bunnylake for shipping and I can lookup your tracking number. I will respond to these pms sometime tonight.
Also, any orders that went out today got scoops and new shifts. :)
My tracking number still gives me "Shipping Label Created". Is this normal?
its been posted in the thread a few times now, but codys daughter broke her leg during the last packing session, so some things hadnt been dropped off
its been posted in the thread a few times now, but codys daughter broke her leg during the last packing session, so some things hadnt been dropped off
So Cody works that furiously to package and send items out, his own daughter got caught in his production line :o ........? Talk about commitment to his work, he stops at nothing in getting our key-sets out :thumb: .
hehe well it happened at the park after he had packed but before he had dropped them off bless her
everyone who ordered through the site should have a shipping notification, anyone who ordered via pm wont get a shipping notification
My view... low riding in my office chair. :DShow Image(http://i.imgur.com/OalbhoV.png)
My view... low riding in my office chair. :DShow Image(http://i.imgur.com/OalbhoV.png)
Like the colour-way there including the Savu (if that's a Roccat mouse).
I have received tracking info, but it's been simmering in San Jose for a few days. Any idea what is the deal with that?
https://tools.usps.com/go/TrackConfirmAction_input?qtc_tLabels1=9400110897700020062363
Show Image(http://i.imgur.com/4N1SMmVh.jpg)
The JD40, she is complete.Show Image(http://i.imgur.com/dMqvejH.jpg)
The JD40, she is complete.Show Image(http://i.imgur.com/Sw7FxJe.jpg)
Congrats, man. It must be awesome to have it all come together. But especially thanks for letting the rest of us tag along!
Also, nice stickers. What have you got in there, clears?
I put these on my Noppoo Spyder 87 Lolita, and they sound (what a difference) and feel great. Only problem is the spacebar; it is sticky on here and I had to go back to the stock spacebar. Anyone else with this keyboard having the same issues? I didn't see any interference with the other keys. I think it's because of the Cherry style stabilizers. Maybe filing the plastic around the tabs that go into the stabilizer would help?
One other question: which way do the arrow keys go? I have mine all lined up to resemble the DEL/END/PAGE DOWN orientation. Is that correct?
if you take the space bar off sir, and pop 2 little squares you cut out from the baggy the caps come in, a bit smaller than a centimetre square maybe, pop them on the top of the 2 stabs, then push the spacebar down, this normally fixes any space bar issues i have, i actually do it on all my boards now just out of routine more than anything
A little piece of scotch tape works great too, but I also had to do this on my costar stabilizers (quickfire), and didn't have to apply any tape for cherry stabilizers.
I have done this with loose costar stabilizers, but these kailh stabilizers seem to have a different problem. I'll look more closely to see what's up, but I don't think it's an issue of the tabs not fitting tightly enough in the slots, but of the rectangular stabilizer box not being quite wide enough to let the key move freely.
My view... low riding in my office chair. :DShow Image(http://i.imgur.com/OalbhoV.png)
Show Image(http://i.imgur.com/OalbhoV.png)
Show Image(http://i.imgur.com/qdWBImKh.jpg?1)Show Image(http://i.imgur.com/4N1SMmVh.jpg)
Show Image(http://i.imgur.com/Sw7FxJe.jpg)
I have received tracking info, but it's been simmering in San Jose for a few days. Any idea what is the deal with that?
https://tools.usps.com/go/TrackConfirmAction_input?qtc_tLabels1=9400110897700020062363
everything has now been dropped off as of yesterday, so itll update soon
I have received tracking info, but it's been simmering in San Jose for a few days. Any idea what is the deal with that?
https://tools.usps.com/go/TrackConfirmAction_input?qtc_tLabels1=9400110897700020062363
everything has now been dropped off as of yesterday, so itll update soon
Packaged arrived today, but the shipping info is still wonky. Whatever, I don't care, all that matters is they arrived. Thanks.
That looks unreal. Nice shot.Show Image(http://i.imgur.com/MRQcnCK.jpg)
YUMMY! thanks CtrlAlt Team
That looks unreal. Nice shot.Show Image(http://i.imgur.com/MRQcnCK.jpg)
YUMMY! thanks CtrlAlt Team
That looks unreal. Nice shot.Show Image(http://i.imgur.com/MRQcnCK.jpg)
YUMMY! thanks CtrlAlt Team
Is this an actual PHOTO which is totally 'unmolested' via Photoshop?
Show Image(http://i.imgur.com/MRQcnCK.jpg)
YUMMY! thanks CtrlAlt Team
Only adjusted the brightness and contrast to portray the color accurately :D
Got it today. Shift key is straight and I have the scoops. I'll check that all the rest of the keys are there later.
(http://i.imgur.com/GVOwFmC.jpg) (http://imgur.com/GVOwFmC)
Show Image(http://i.imgur.com/MRQcnCK.jpg)
YUMMY! thanks CtrlAlt Team
Got it today. Shift key is straight and I have the scoops. I'll check that all the rest of the keys are there later.
(http://i.imgur.com/GVOwFmC.jpg) (http://imgur.com/GVOwFmC)
Without trying to sift through the entire thread, is there a definitive list of what was supposed to come in the set someplace, including the extras that were worked in later, if any?
I think I'm missing a 1x ctrl at least because I have 1x Win/shift/alt, but I can't even see those on the mockup so I've nothing to cross-reference against.
Without trying to sift through the entire thread, is there a definitive list of what was supposed to come in the set someplace, including the extras that were worked in later, if any?
I think I'm missing a 1x ctrl at least because I have 1x Win/shift/alt, but I can't even see those on the mockup so I've nothing to cross-reference against.
There wasn't a 1u ctrl
Beautiful color. I'm looking forward to receive mine!Show Image(http://i.imgur.com/MRQcnCK.jpg)
YUMMY! thanks CtrlAlt Team
Got it today. Shift key is straight and I have the scoops. I'll check that all the rest of the keys are there later.
(http://i.imgur.com/GVOwFmC.jpg) (http://imgur.com/GVOwFmC)
Good thing. Thanks Bunny for the update.Got it today. Shift key is straight and I have the scoops. I'll check that all the rest of the keys are there later.
(http://i.imgur.com/GVOwFmC.jpg) (http://imgur.com/GVOwFmC)
scoops looks great
as a quick update for people whos orders were sent before we found out about the scoop and shift issue
we are gonna order a ton of bubble mailers, ill get cody to way up the packages and get shipping quoptes, and ill work out what we do from there and get back to you
Got it today. Shift key is straight and I have the scoops. I'll check that all the rest of the keys are there later.
(http://i.imgur.com/GVOwFmC.jpg) (http://imgur.com/GVOwFmC)
scoops looks great
as a quick update for people whos orders were sent before we found out about the scoop and shift issue
we are gonna order a ton of bubble mailers, ill get cody to way up the packages and get shipping quoptes, and ill work out what we do from there and get back to you
For the love of orange!!Good choice of novelty caps! I love it. Looking forward to receive mine.Show Image(http://i.imgur.com/eEY2fUo.jpg)Show Image(http://i.imgur.com/4jQwvFd.jpg)Show Image(http://i.imgur.com/bNhaJ3e.jpg)Show Image(http://i.imgur.com/hr4GeO6.jpg)
For the love of orange!!Good choice of novelty caps! I love it. Looking forward to receive mine.Show Image(http://i.imgur.com/eEY2fUo.jpg)Show Image(http://i.imgur.com/4jQwvFd.jpg)Show Image(http://i.imgur.com/bNhaJ3e.jpg)Show Image(http://i.imgur.com/hr4GeO6.jpg)
lol, that 0 also looks tilted
lol, that 0 also looks tilted
lol, that 0 also looks tilted
I guess I see a tiny bit of a wider gap on one end, but honestly I would literally never have noticed that if you hadn't pointed it out.
I've seen your posts about Infinity boards looking crooked, and I've seen your posts about chasing down ping in multiple boards. I think in both regards your tolerance is much, much lower than average. This is what it is, and I hope I don't sound judgmental or anything, because that's not my intent. Everybody's different. But most people don't notice/aren't bothered by this kind of stuff.
Is that the third infinity you scrounged for or your two from Massdrop? I think we were both part of the last Massdrop buy but I haven't heard a peep from MD yet.lol, that 0 also looks tilted
I guess I see a tiny bit of a wider gap on one end, but honestly I would literally never have noticed that if you hadn't pointed it out.
I've seen your posts about Infinity boards looking crooked, and I've seen your posts about chasing down ping in multiple boards. I think in both regards your tolerance is much, much lower than average. This is what it is, and I hope I don't sound judgmental or anything, because that's not my intent. Everybody's different. But most people don't notice/aren't bothered by this kind of stuff.
Haha, Indeed my tolerance is low, I'm aware, I generally do my best to minimise these issues and move on/settle later on, the switch placements for example are easily fixable, both during and after construction, same goes for the ping, the initial struggle is painful, yet it pays later on
Going to receive this set and the infinity tomorrow if everything goes according to plan, I'm very excited
Is that the third infinity you scrounged for or your two from Massdrop? I think we were both part of the last Massdrop buy but I haven't heard a peep from MD yet.
Oh, and I obviously need a numpad....Ugh, I need one of those Lambda keys.Show Image(http://i.imgur.com/vJ3TdMo.jpg)
Mine arrived today, scoops included. And AFAIK my right shift is on the straight and narrow.
Mine was a PM order, and I never did receive a shipping notice. So for those of you still waiting, just be patient. I'm sure your keys will arrive soon!
Show Image(http://i.imgur.com/MRQcnCK.jpg)
YUMMY! thanks CtrlAlt Team
Mine arrived today, scoops included. And AFAIK my right shift is on the straight and narrow.
Mine was a PM order, and I never did receive a shipping notice. So for those of you still waiting, just be patient. I'm sure your keys will arrive soon!
hope you enjoy your set
we dont do shipping notices for pm order currently but we will soon have a much better solution and be able to add orders to the site after the fact
Mine arrived today, scoops included. And AFAIK my right shift is on the straight and narrow.
Mine was a PM order, and I never did receive a shipping notice. So for those of you still waiting, just be patient. I'm sure your keys will arrive soon!
hope you enjoy your set
we dont do shipping notices for pm order currently but we will soon have a much better solution and be able to add orders to the site after the fact
I was not complaining as I did not expect a shipping notice. I was just trying really hard this whole time to be patient and not to bug you busy Ctrl Alt folks, and I'm just encouraging others to do the same.
Anyway, when I picked up my packages this morning (I usually get several a day) and I saw the name "Cody" on the return address of that little square box, I squealed like a schoolgirl.
If your tracking number didn't update, does it mean there is a problem with USPS or is it only a bug and you have to play the waiting game? I don't mind waiting without knowing but I don't want them to have a problem with my little precious set.Show Image(http://memecrunch.com/meme/1IH15/my-precious/image.png?w=500)
If your tracking number didn't update, does it mean there is a problem with USPS or is it only a bug and you have to play the waiting game? I don't mind waiting without knowing but I don't want them to have a problem with my little precious set.Show Image(http://memecrunch.com/meme/1IH15/my-precious/image.png?w=500)
If your tracking number didn't update, does it mean there is a problem with USPS or is it only a bug and you have to play the waiting game? I don't mind waiting without knowing but I don't want them to have a problem with my little precious set.Show Image(http://memecrunch.com/meme/1IH15/my-precious/image.png?w=500)
My tracking still shows "Label created", and the package arrived today. So I wouldn't worry, it will come.
If your tracking number didn't update, does it mean there is a problem with USPS or is it only a bug and you have to play the waiting game? I don't mind waiting without knowing but I don't want them to have a problem with my little precious set.Show Image(http://memecrunch.com/meme/1IH15/my-precious/image.png?w=500)
My tracking still shows "Label created", and the package arrived today. So I wouldn't worry, it will come.
Exactly, using federal Postal Services will always take more time to arrive at any destination or sometimes you get lucky and receive the package as soon as possible.
Would only worry when three or four months pass and nothing has arrived from your email postal details or when Cody let's you know it's been shipped on that date. Remembered in the past a certain 'someone' had said to me personally via pm here on Geekhack he sent it, six months went by still nothing then a year went by still nothing, yet the scumbag pissed off from ever running another Group Buy which was good for everyone here nowadays.
Some people are born lying scumbags but NOT Cody or Bunny, these guys say it's been sent on that date and you can literally count on an analog clock when it's due to arrive. Everything I have ever bought from these guys has been delivered to my residence here in Sh1town, Nowheresville, so everyone can count on shipping when dealing with CTRL/ALT. 100% trustful and decent compared to most others that I have ever dealt with here on Geekhack.
Beautiful set! Thanks Cody, Bunny and team. Also Elrick for much hype; changed my mind near the GB end and caved in.
Just need to get a board.
(Attachment Link)
Not to be a squeaky wheel, but I haven't even heard if it has shipped or gotten a tracking number. Any information wild be appreciated.
I understand all of that, and I've contacted Cody as instructed, Sunday turned to Monday, and Monday turned to today. Lol I know **** happens, I just needed a rough ETA so I can let someone know as I'm in a different state for work. Thanks again for the clarification. :D
Beautiful set! Thanks Cody, Bunny and team. Also Elrick for much hype; changed my mind near the GB end and caved in.
Just need to get a board.
(Attachment Link)
Loving my set, but weren't the F & J supposed to have a slightly different homing profile? At least, they're different looking in the mockup image.
If only I got into this obsession earlier.. :/ I'm dying to get this as well. Anyone backing out with their order? Please let me know, I would love to own this set.
Here's some love for the full-size fans among us: HBG on a Noppoo EC108-Pro (ghetto Topre with MX sliders).
(Attachment Link)
Here's some love for the full-size fans among us: HBG on a Noppoo EC108-Pro (ghetto Topre with MX sliders).imho you mixed up and down arrow keys
(Attachment Link)
Here's some love for the full-size fans among us: HBG on a Noppoo EC108-Pro (ghetto Topre with MX sliders).
(Attachment Link)
Here's some love for the full-size fans among us: HBG on a Noppoo EC108-Pro (ghetto Topre with MX sliders).
(Attachment Link)
Here's some love for the full-size fans among us: HBG on a Noppoo EC108-Pro (ghetto Topre with MX sliders).imho you mixed up and down arrow keys
(Attachment Link)
oh didn't know, thx for the clarification jd.Here's some love for the full-size fans among us: HBG on a Noppoo EC108-Pro (ghetto Topre with MX sliders).imho you mixed up and down arrow keys
(Attachment Link)
The kit was designed like that, so you have a row 2 up arrow, and row 4 for the rest. Makes a nice little concave arrow cluster. :)
MoreHere's some love for the full-size fans among us: HBG on a Noppoo EC108-Pro (ghetto Topre with MX sliders).
(Attachment Link)
imho you mixed up and down arrow keys
MoreHere's some love for the full-size fans among us: HBG on a Noppoo EC108-Pro (ghetto Topre with MX sliders).
(Attachment Link)
How does the ghetto Topre feel so far with the SA caps?
Damn I wish mine will arrive soon! :)
MoreHere's some love for the full-size fans among us: HBG on a Noppoo EC108-Pro (ghetto Topre with MX sliders).
(Attachment Link)
It looks great on that. How does it feel on the topre-likes?
MoreHere's some love for the full-size fans among us: HBG on a Noppoo EC108-Pro (ghetto Topre with MX sliders).
(Attachment Link)
If only that case was black.
we may have a couple more extras
ill know when cody nexts gets to the office
if i do
ill post em here
first come first serve
we may have a couple more extras
ill know when cody nexts gets to the office
if i do
ill post em here
first come first serve
we may have a couple more extras
ill know when cody nexts gets to the office
if i do
ill post em here
first come first serve
we may have a couple more extras
ill know when cody nexts gets to the office
if i do
ill post em here
first come first serve
This makes me a tad anxious having a paid PM without tracking or recent PM response. I understand cody has been swamped and I imagine that I'll get a package of infinite awesomeness any day now. I just wanted to say something.
Anyway, thanks for running this GB, Bunny and Cody. Pics that people are putting up have me super excited!
I got Hack'd today... put it on a Deck Hassium I picked up really cheap so I could try out this set on a 100% and also give MX reds a go.
This is my first SA set and I'm loving it!
Thanks again to JD, Bunny and cody for making this happen!
(Attachment Link)
I got Hack'd today... put it on a Deck Hassium I picked up really cheap so I could try out this set on a 100% and also give MX reds a go.
This is my first SA set and I'm loving it!
Thanks again to JD, Bunny and cody for making this happen!
(Attachment Link)
I got Hack'd today... put it on a Deck Hassium I picked up really cheap so I could try out this set on a 100% and also give MX reds a go.
This is my first SA set and I'm loving it!
Thanks again to JD, Bunny and cody for making this happen!
(Attachment Link)
The WASD Code keyboard is available with greens.I got Hack'd today... put it on a Deck Hassium I picked up really cheap so I could try out this set on a 100% and also give MX reds a go.
This is my first SA set and I'm loving it!
Thanks again to JD, Bunny and cody for making this happen!
(Attachment Link)
Moar fullsize!
That looks pretty nice, does Deck offer anything with greens? I can't find many fullsize board with greens. But yours looks great with HbG on it.
The WASD Code keyboard is available with greens.I got Hack'd today... put it on a Deck Hassium I picked up really cheap so I could try out this set on a 100% and also give MX reds a go.
This is my first SA set and I'm loving it!
Thanks again to JD, Bunny and cody for making this happen!
(Attachment Link)
Moar fullsize!
That looks pretty nice, does Deck offer anything with greens? I can't find many fullsize board with greens. But yours looks great with HbG on it.
I got it mostly for the case colour ;D and to try out reds. It's the Asia-Pacific version with not-ugly Helvetica legends and pretty nice as stock. My only complaint is those four keys above the numpad are totally wasted on backlight control. Really wish I could bind those keys to other functions.
I got it mostly for the case colour ;D and to try out reds. It's the Asia-Pacific version with not-ugly Helvetica legends and pretty nice as stock. My only complaint is those four keys above the numpad are totally wasted on backlight control. Really wish I could bind those keys to other functions.
Having those 4 keys seems like a win-win situation :cool:
I got it mostly for the case colour ;D and to try out reds. It's the Asia-Pacific version with not-ugly Helvetica legends and pretty nice as stock. My only complaint is those four keys above the numpad are totally wasted on backlight control. Really wish I could bind those keys to other functions.
Having those 4 keys seems like a win-win situation :cool:
You butchered that pun like a lambda to the slaughter :cool:
I got Hack'd today... put it on a Deck Hassium I picked up really cheap so I could try out this set on a 100% and also give MX reds a go.Beautiful board! The orange key is a really good addition to the set! Let's purchase an orange novelty for the set to come! ^^
This is my first SA set and I'm loving it!
Thanks again to JD, Bunny and cody for making this happen!
(Attachment Link)
Order came in today, but unfortunately I got the full SP bonus pack (aka tilted shift and no scoops!). It has been a while since I have used caps that are generally untextured, but I really love the clean feeling of thick smooth ABS. The sculpt is very extreme, but it is very successful at creating a comfortable experience. Currently have them on a Novatouch and literally everything has a nice weighted smooth feeling to it. Much more so than the stock ABS on the nova. I'll put up some pictures soon, but first I have to swap some stems around for my artisans :p
Order came in today, but unfortunately I got the full SP bonus pack (aka tilted shift and no scoops!). It has been a while since I have used caps that are generally untextured, but I really love the clean feeling of thick smooth ABS. The sculpt is very extreme, but it is very successful at creating a comfortable experience. Currently have them on a Novatouch and literally everything has a nice weighted smooth feeling to it. Much more so than the stock ABS on the nova. I'll put up some pictures soon, but first I have to swap some stems around for my artisans :p
sure you have seen, but we have the replacements for those keys from sp now and we will work out getting them to people shortly
Order came in today, but unfortunately I got the full SP bonus pack (aka tilted shift and no scoops!). It has been a while since I have used caps that are generally untextured, but I really love the clean feeling of thick smooth ABS. The sculpt is very extreme, but it is very successful at creating a comfortable experience. Currently have them on a Novatouch and literally everything has a nice weighted smooth feeling to it. Much more so than the stock ABS on the nova. I'll put up some pictures soon, but first I have to swap some stems around for my artisans :p
I really love the clean feeling of thick smooth ABS. The sculpt is very extreme, but it is very successful at creating a comfortable experience.
clean feeling
thick
smooth
Show Image(http://i.imgur.com/M28blSi.jpg)Show Image(http://i.imgur.com/Cb5xJl0.jpg)Show Image(http://i.imgur.com/bR96bRS.jpg)
I thought these would go well on itShow Image(http://i.imgur.com/L9nzOR9.jpg)
^With flash to give you a better idea of the colorationShow Image(http://i.imgur.com/9Xr5uHB.jpg)
Show Image(http://i.imgur.com/M28blSi.jpg)Show Image(http://i.imgur.com/Cb5xJl0.jpg)Show Image(http://i.imgur.com/bR96bRS.jpg)
I thought these would go well on itShow Image(http://i.imgur.com/L9nzOR9.jpg)
^With flash to give you a better idea of the colorationShow Image(http://i.imgur.com/9Xr5uHB.jpg)
Loving SA sculpted. Dare I say it feels better than gmk...
Really good choice of artisans right here! They match the set really well.Show Image(http://i.imgur.com/M28blSi.jpg)Show Image(http://i.imgur.com/Cb5xJl0.jpg)Show Image(http://i.imgur.com/bR96bRS.jpg)
I thought these would go well on itShow Image(http://i.imgur.com/L9nzOR9.jpg)
^With flash to give you a better idea of the colorationShow Image(http://i.imgur.com/9Xr5uHB.jpg)
There have been a lot of orange caps on this thread but that Volcanic is damn near perfect! Is it super rare and/or old or do I have a tiny chance of getting one? I guess most orange fans will be in on this buy so probably not...Show Image(http://i.imgur.com/L9nzOR9.jpg)
I'm wondering how I can receive the fixed keys, since I acquired radio_killah's order
This is my life everydayShow Image(http://i.imgur.com/04OWdyt.jpg)
followed byShow Image(http://i.imgur.com/m21qYY2.jpg)
Never wanted something this bad...
This is my life everydayShow Image(http://i.imgur.com/04OWdyt.jpg)
followed byShow Image(http://i.imgur.com/m21qYY2.jpg)
Never wanted something this bad...
Totally worth the wait, these caps are awesome!
for all the people who missed out on this set, but want some nice sculpted SA in their lives
https://ctrlalt.io/buys/sa-retro
Thanks Bunny, Cody, the rest of the Ctrl Alt team and JD. The key set is awesome! I just love it. I didn't expect it to change the feel of my board that much. The "Thock" is deeper and I don't hear the noise of the caps hitting the plate or (the switch housing). The noise is just pure love. The set is beautiful as well.Show Image(http://i.imgur.com/HAyS67Q.jpg)Show Image(http://i.imgur.com/NC8MOFe.jpg)Show Image(http://i.imgur.com/P0by24S.jpg)Show Image(http://i.imgur.com/gwsIpIb.jpg)
Thanks for the key holder. It is much appreciated! It joined my keys right when I opened the package. :)
Regarding the keys are receiving I didn't get the scoops J and F or if I did I don't really see difference with the other key in the same row. I'll just wait and see how it goes once everyone received their order. :)
For the right shift, it doesn't seem to have problem, what do you guys think?Show Image(http://i.imgur.com/rzb1fU3.jpg)
I got 3 differents profile esc key as well, is this normal? (I don't remember the final composition of the set ::) ).Show Image(http://i.imgur.com/qTUD8Y2.jpg)Show Image(http://i.imgur.com/vX9h8Zj.jpg)
Thank you again for all the hard work! That keycaps will stay on my board for a long long time! :-*
Thanks Bunny, Cody, the rest of the Ctrl Alt team and JD. The key set is awesome! I just love it. I didn't expect it to change the feel of my board that much. The "Thock" is deeper and I don't hear the noise of the caps hitting the plate or (the switch housing). The noise is just pure love. The set is beautiful as well.Show Image(http://i.imgur.com/HAyS67Q.jpg)Show Image(http://i.imgur.com/NC8MOFe.jpg)Show Image(http://i.imgur.com/P0by24S.jpg)Show Image(http://i.imgur.com/gwsIpIb.jpg)
Thanks for the key holder. It is much appreciated! It joined my keys right when I opened the package. :)
Regarding the keys are receiving I didn't get the scoops J and F or if I did I don't really see difference with the other key in the same row. I'll just wait and see how it goes once everyone received their order. :)
For the right shift, it doesn't seem to have problem, what do you guys think?Show Image(http://i.imgur.com/rzb1fU3.jpg)
I got 3 differents profile esc key as well, is this normal? (I don't remember the final composition of the set ::) ).Show Image(http://i.imgur.com/qTUD8Y2.jpg)Show Image(http://i.imgur.com/vX9h8Zj.jpg)
Thank you again for all the hard work! That keycaps will stay on my board for a long long time! :-*
your set was sent prior to us getting the replacement keys from sp, so you dont have the fixed shift or scoops yet
and you are indeed meant to have all those escapes, they are in the mockup, its so people can use one on a fullsize board, 60% or jd40
Sorry if I missed it. Do we need to PM Bunny to get the scoops and shift or if we were on the order we'll just get them?
Sorry if I missed it. Do we need to PM Bunny to get the scoops and shift or if we were on the order we'll just get them?
we have some bubble mailers ordered, we are still working out about what we are gonna do about shipping them to people
Sorry if I missed it. Do we need to PM Bunny to get the scoops and shift or if we were on the order we'll just get them?
we have some bubble mailers ordered, we are still working out about what we are gonna do about shipping them to people
If you refer to the shipping fees, personally I don't mind paying them. There are no reasons that you should pay them guys especially considering it is bubbled mail hence it is going to be cheap (I think) for people to pay them. However a cheap amount * 300 is not cheap anymore. :D
Sorry if I missed it. Do we need to PM Bunny to get the scoops and shift or if we were on the order we'll just get them?
we have some bubble mailers ordered, we are still working out about what we are gonna do about shipping them to people
If you refer to the shipping fees, personally I don't mind paying them. There are no reasons that you should pay them guys especially considering it is bubbled mail hence it is going to be cheap (I think) for people to pay them. However a cheap amount * 300 is not cheap anymore. :D
yeah that is really the decision
once cody gets the mailers, he is gonna weigh up the packages and gimme price on both conus and international, and then based on those figures ill either decide to eat the costs or ask people to chip in
I'm definitely paying shipping for mine. I think most everyone will want to.
I'm definitely paying shipping for mine. I think most everyone will want to.
I'm definitely paying shipping for mine. I think most everyone will want to.
Agree. No need to take a bath on this Bunny.
I'm definitely paying shipping for mine. I think most everyone will want to.
Agree. No need to take a bath on this Bunny.
rather than waiting im actually being proactive today (guess im in an uncharacteristic mood lol)
putting together a google form now
basically just asking people order number, gh name address, if they want the scoops and shift, then asking if they would be prepared to cover shipping costs and if so what their paypal email is
whatever happens they will get shipped to anyone who wants them, regardless of whether or not they opt to cover shipping, but anyone that does it will be greatly appreciated
im sure it wont cost much to ship them, but even if its only a couple bucks for conus and a few more for international, its certainly gonna add up across all orders
ill post the form in a sec when its done
Mine's waiting on hyperfuse, so we can just slip the extra keys in with the original package, correct?
ok guys, could anyone missing the scoops and with the crooked right shift
please fill out this form
http://goo.gl/forms/xdBFkVjaOT
also, if you fill out the form, could you please quote this post and say you have done it, not for my benefit, but to maximise the chances of people seeing the form
ok guys, could anyone missing the scoops and with the crooked right shift
please fill out this form
http://goo.gl/forms/xdBFkVjaOT
also, if you fill out the form, could you please quote this post and say you have done it, not for my benefit, but to maximise the chances of people seeing the form
ok guys, could anyone missing the scoops and with the crooked right shiftForm submitted.
please fill out this form
http://goo.gl/forms/xdBFkVjaOT
also, if you fill out the form, could you please quote this post and say you have done it, not for my benefit, but to maximise the chances of people seeing the form
ok guys, could anyone missing the scoops and with the crooked right shift
please fill out this form
http://goo.gl/forms/xdBFkVjaOT
also, if you fill out the form, could you please quote this post and say you have done it, not for my benefit, but to maximise the chances of people seeing the form
ok guys, could anyone missing the scoops and with the crooked right shift
please fill out this form
http://goo.gl/forms/xdBFkVjaOT
also, if you fill out the form, could you please quote this post and say you have done it, not for my benefit, but to maximise the chances of people seeing the form
ok guys, could anyone missing the scoops and with the crooked right shift
please fill out this form
http://goo.gl/forms/xdBFkVjaOT
also, if you fill out the form, could you please quote this post and say you have done it, not for my benefit, but to maximise the chances of people seeing the form
ok guys, could anyone missing the scoops and with the crooked right shift
please fill out this form
http://goo.gl/forms/xdBFkVjaOT
also, if you fill out the form, could you please quote this post and say you have done it, not for my benefit, but to maximise the chances of people seeing the form
ok guys, could anyone missing the scoops and with the crooked right shift
please fill out this form
http://goo.gl/forms/xdBFkVjaOT (http://goo.gl/forms/xdBFkVjaOT)
also, if you fill out the form, could you please quote this post and say you have done it, not for my benefit, but to maximise the chances of people seeing the form
ok guys, could anyone missing the scoops and with the crooked right shift
please fill out this form
http://goo.gl/forms/xdBFkVjaOT
also, if you fill out the form, could you please quote this post and say you have done it, not for my benefit, but to maximise the chances of people seeing the form
ok guys, could anyone missing the scoops and with the crooked right shift
please fill out this form
http://goo.gl/forms/xdBFkVjaOT
also, if you fill out the form, could you please quote this post and say you have done it, not for my benefit, but to maximise the chances of people seeing the form
ok guys, could anyone missing the scoops and with the crooked right shift
please fill out this form
http://goo.gl/forms/xdBFkVjaOT
also, if you fill out the form, could you please quote this post and say you have done it, not for my benefit, but to maximise the chances of people seeing the form
ok guys, could anyone missing the scoops and with the crooked right shiftDone with PayPal details included.
please fill out this form
http://goo.gl/forms/xdBFkVjaOT
also, if you fill out the form, could you please quote this post and say you have done it, not for my benefit, but to maximise the chances of people seeing the form
ok guys, could anyone missing the scoops and with the crooked right shiftForm not filled as I'm a PM person so mine will perfect - wouldn't mind contributing towards other INTL people's cost (it's not their fault anymore than Bunny's, this is a group buy so costs should be shared out) but didn't know what to put!
please fill out this form
http://goo.gl/forms/xdBFkVjaOT
also, if you fill out the form, could you please quote this post and say you have done it, not for my benefit, but to maximise the chances of people seeing the form
Form not filled as I'm a PM person so mine will perfect - wouldn't mind contributing towards other INTL people's cost (it's not their fault anymore than Bunny's, this is a group buy so costs should be shared out) but didn't know what to put!
I still haven't gotten my tracking number for my initial order :'( tho Cody did indeed say they were sent out with correct shifts and scoops :D. Is there anyway I can confirm that before filling out the form?
ok guys, could anyone missing the scoops and with the crooked right shift
please fill out this form
http://goo.gl/forms/xdBFkVjaOT (http://goo.gl/forms/xdBFkVjaOT)
also, if you fill out the form, could you please quote this post and say you have done it, not for my benefit, but to maximise the chances of people seeing the form
I still haven't gotten my tracking number for my initial order :'( tho Cody did indeed say they were sent out with correct shifts and scoops :D. Is there anyway I can confirm that before filling out the form?
shoot cody a pm and he will be able to get you your tracking number, when i speak to him tonight ill also get him to check his pms
all the final orders went out with scoops etc, so no need to fill out the form, however if for any reason your order shows up minus scoops, itll be no problem to get a set out to you
ok guys, could anyone missing the scoops and with the crooked right shift
please fill out this form
http://goo.gl/forms/xdBFkVjaOT
also, if you fill out the form, could you please quote this post and say you have done it, not for my benefit, but to maximise the chances of people seeing the form
I still haven't gotten my tracking number for my initial order :'( tho Cody did indeed say they were sent out with correct shifts and scoops :D. Is there anyway I can confirm that before filling out the form?
shoot cody a pm and he will be able to get you your tracking number, when i speak to him tonight ill also get him to check his pms
all the final orders went out with scoops etc, so no need to fill out the form, however if for any reason your order shows up minus scoops, itll be no problem to get a set out to you
I have indeed, and was trying to spare him a daily bombardment lol. If they show up without them for some reason I'll be sure to drop a line. As always I appreciate your haste with getting back to people :D
ok guys, could anyone missing the scoops and with the crooked right shiftFilled out! Your plan worked, I found the form this way :thumb: Also, happy to throw in extra shipping to help offset the cost of INT'L orders; paypal address included, feel free to charge INT'L rates instead of CONUS.
please fill out this form
http://goo.gl/forms/xdBFkVjaOT
also, if you fill out the form, could you please quote this post and say you have done it, not for my benefit, but to maximise the chances of people seeing the form
ok guys, could anyone missing the scoops and with the crooked right shift
please fill out this form
http://goo.gl/forms/xdBFkVjaOT
also, if you fill out the form, could you please quote this post and say you have done it, not for my benefit, but to maximise the chances of people seeing the form
My Hack'd has arrived and it looks just as good as the pics; the legends are clear even in low light which is awesome - I'm giving it a bit of a type-in period to ensure everything's down tight before posting pics :D
Unfortunately it's not perfect as I'd hoped, I'm missing a couple of keys and one of them is a must have - the 1u backspace arrow. The other is the light grey Geek Hack row 3 which would be nice to have, but I could live without.
On the plus side I got an extra down arrow (or alternate row up arrow? Is there even a difference??) which I'd have tried to buy an extra of.
Guess I need to fill in the form after all?
we are just waiting for the last couple sets to show up, then ill do a form for missing keys in setsGreat! Shouldn't be many more, I was an international PM order shipped in the last batch :)
that way i can order them all from sp at the same time
we are just waiting for the last couple sets to show up, then ill do a form for missing keys in setsGreat! Shouldn't be many more, I was an international PM order shipped in the last batch :)
that way i can order them all from sp at the same time
we are just waiting for the last couple sets to show up, then ill do a form for missing keys in setsGreat! Shouldn't be many more, I was an international PM order shipped in the last batch :)
that way i can order them all from sp at the same time
Still waiting...Show Image(http://i.imgur.com/aVXIzGt.gif)
ok guys, could anyone missing the scoops and with the crooked right shift
please fill out this form
http://goo.gl/forms/xdBFkVjaOT (http://goo.gl/forms/xdBFkVjaOT)
also, if you fill out the form, could you please quote this post and say you have done it, not for my benefit, but to maximise the chances of people seeing the form
ok guys, could anyone missing the scoops and with the crooked right shift
please fill out this form
http://goo.gl/forms/xdBFkVjaOT
also, if you fill out the form, could you please quote this post and say you have done it, not for my benefit, but to maximise the chances of people seeing the form
we are just waiting for the last couple sets to show up, then ill do a form for missing keys in setsGreat! Shouldn't be many more, I was an international PM order shipped in the last batch :)
that way i can order them all from sp at the same time
Still waiting...Show Image(http://i.imgur.com/aVXIzGt.gif)
Patience - it will arrive!
One benefit of being lower on the list is that many problems discovered by the early recipients are resolved before yours ships :)
we are just waiting for the last couple sets to show up, then ill do a form for missing keys in setsGreat! Shouldn't be many more, I was an international PM order shipped in the last batch :)
that way i can order them all from sp at the same time
Still waiting...Show Image(http://i.imgur.com/aVXIzGt.gif)
Patience - it will arrive!
One benefit of being lower on the list is that many problems discovered by the early recipients are resolved before yours ships :)
My white box came in - the Mrs said so, when I get back in town shall be eagerly attacking the packaging for these babies. Now dreaming about which keyboard to impregnate with this key-set.
I received my set two days ago, I'm currently using them on my Filco TKL with mx blacks. Obligatory picture:Show Image(http://i.imgur.com/9eZfRs3.jpg?1)
My first impressions so far:
* They look great and I love the smooth textured feeling
* The typing feel is excellent too: very heavy and very "thocky". I think that they complement a heavier switch type like mx black very well.
* I'm not 100% convinced about the sculpting, or at least with some particular row choices made on this set. I like that the alphanumeric section is (mostly) curved, but I'm less a fan of the function keys in Row 3 profile. It feels like they are hiding behind the numrow and I would definitely have preferred them in Row 1 as well. I also feel like the bottom row in Row 3 profile clashes with the zxcv row in Row 4 profile, the smooth curve from the 1-q-a-z rows suddenly stops and drops off, like you're coming at the end of a ski ramp.
At the risk of going off on a tangent here, I think my ideal row distribution for an SA set would be as follows:
Function row: R1
Numrow: R1
qwerty row: R2
asdf row: R3
zxcv row: R3
bottom row: R4 (*)
This way you have a completely smooth transition between every row, and as an added bonus, there's no weirdness with the shift keys being the wrong profile.
(*) I'm not sure if an R4 space bar is possible.
The reasons I chose those profiles are these:
1. Many people like to use artisan caps on the F-row, which look better with Row 3 profile than Row 1 profile. However, if I had it to do over again, I would probably make this Row 1.
2. The bottom row 1.25-unit mods were supposedly not available in Row 4 profile with semi matte finish. That's why they had to be made in Row 3 profile, so the other bottom row keys were done in Row 3 profile to match. However, that was bad information given from SP. They actually do have the molds for Row 4 semi matte 1.25u keys.
So, had I known this at the time, the profile would have been 1-1-2-3-4-4. Just like SA Retro is going to be.
* Spacebar is always Row 3-ish profile, and 2.25u and 2.75u shifts only exist in Row 3 profile, not Row 4.
The reasons I chose those profiles are these:
1. Many people like to use artisan caps on the F-row, which look better with Row 3 profile than Row 1 profile. However, if I had it to do over again, I would probably make this Row 1.
Fair enough :)2. The bottom row 1.25-unit mods were supposedly not available in Row 4 profile with semi matte finish. That's why they had to be made in Row 3 profile, so the other bottom row keys were done in Row 3 profile to match. However, that was bad information given from SP. They actually do have the molds for Row 4 semi matte 1.25u keys.
So, had I known this at the time, the profile would have been 1-1-2-3-4-4. Just like SA Retro is going to be.
* Spacebar is always Row 3-ish profile, and 2.25u and 2.75u shifts only exist in Row 3 profile, not Row 4.
But why make the zxcv row in R4 profile, when:
1) it clashes with the shifts that are only available in R3 profile
2) it makes a non-smooth transition with a bottom row that's also in R4 profile.
Wouldn't 1-1-2-3-3-4 be better?
...
However, if I had it to do over again, I would probably make this Row 1.
...
They actually do have the molds for Row 4 semi matte 1.25u keys.
...
So, had I known this at the time, the profile would have been 1-1-2-3-4-4. Just like SA Retro is going to be.
Quote...
However, if I had it to do over again, I would probably make this Row 1.
...
They actually do have the molds for Row 4 semi matte 1.25u keys.
...
So, had I known this at the time, the profile would have been 1-1-2-3-4-4. Just like SA Retro is going to be.
So, um, Hack'd by Geeks R2 in 2016?
And unfortunately, there isn't much we can do about the shifts, unless we can come up with $8000+ to pay for new molds.How many sets have been made with these "wrong" shifts so far? Even if just 5 with 100 of each sold it's only $16 for the mold, plus maybe $4 for the actual caps - $20 doesn't much in this hobby, I know I'd pay it. But then I don't have all 5 sets...
And unfortunately, there isn't much we can do about the shifts, unless we can come up with $8000+ to pay for new molds.How many sets have been made with these "wrong" shifts so far? Even if just 5 with 100 of each sold it's only $16 for the mold, plus maybe $4 for the actual caps - $20 doesn't much in this hobby, I know I'd pay it. But then I don't have all 5 sets...
really its not something we should be paying for
its been something both long requested for and promised by sp, and its a piece of tooling as a business they will make money from
when privately funding tooling with sp, the people buying it (us) would have 2 options, firstly, you can make it private, so only the person paying for it can use it, unless they grant permission to someone else to use it, or you can make it public
both options suck
nobody wants to hold this as there own, it should be available to everyone, but with it being available to everyone, we shouldnt have to pay for it
really its not something we should be paying for
its been something both long requested for and promised by sp, and its a piece of tooling as a business they will make money from
when privately funding tooling with sp, the people buying it (us) would have 2 options, firstly, you can make it private, so only the person paying for it can use it, unless they grant permission to someone else to use it, or you can make it public
both options suck
nobody wants to hold this as there own, it should be available to everyone, but with it being available to everyone, we shouldnt have to pay for it
Yup. Problem is we keep living with it so SP has no motivation to replace the mold.
really its not something we should be paying for
its been something both long requested for and promised by sp, and its a piece of tooling as a business they will make money from
when privately funding tooling with sp, the people buying it (us) would have 2 options, firstly, you can make it private, so only the person paying for it can use it, unless they grant permission to someone else to use it, or you can make it public
both options suck
nobody wants to hold this as there own, it should be available to everyone, but with it being available to everyone, we shouldnt have to pay for it
Yup. Problem is we keep living with it so SP has no motivation to replace the mold.
hunger strike
really its not something we should be paying for
its been something both long requested for and promised by sp, and its a piece of tooling as a business they will make money from
when privately funding tooling with sp, the people buying it (us) would have 2 options, firstly, you can make it private, so only the person paying for it can use it, unless they grant permission to someone else to use it, or you can make it public
both options suck
nobody wants to hold this as there own, it should be available to everyone, but with it being available to everyone, we shouldnt have to pay for it
Yup. Problem is we keep living with it so SP has no motivation to replace the mold.
hunger strike
#alignmentmatters
Come on guys, let's get it trending
#godhatesmismatchingprofilesandthatpushingdaisieswascancelledtooearly
really its not something we should be paying for
its been something both long requested for and promised by sp, and its a piece of tooling as a business they will make money from
when privately funding tooling with sp, the people buying it (us) would have 2 options, firstly, you can make it private, so only the person paying for it can use it, unless they grant permission to someone else to use it, or you can make it public
both options suck
nobody wants to hold this as there own, it should be available to everyone, but with it being available to everyone, we shouldnt have to pay for it
Yup. Problem is we keep living with it so SP has no motivation to replace the mold.
hunger strike
really its not something we should be paying for
its been something both long requested for and promised by sp, and its a piece of tooling as a business they will make money from
when privately funding tooling with sp, the people buying it (us) would have 2 options, firstly, you can make it private, so only the person paying for it can use it, unless they grant permission to someone else to use it, or you can make it public
both options suck
nobody wants to hold this as there own, it should be available to everyone, but with it being available to everyone, we shouldnt have to pay for it
Yup. Problem is we keep living with it so SP has no motivation to replace the mold.
hunger strike
I don't mind stealin' bread...
really its not something we should be paying for
its been something both long requested for and promised by sp, and its a piece of tooling as a business they will make money from
when privately funding tooling with sp, the people buying it (us) would have 2 options, firstly, you can make it private, so only the person paying for it can use it, unless they grant permission to someone else to use it, or you can make it public
both options suck
nobody wants to hold this as there own, it should be available to everyone, but with it being available to everyone, we shouldnt have to pay for it
Yup. Problem is we keep living with it so SP has no motivation to replace the mold.
hunger strike
I don't mind stealin' bread...
Then you'll get your wrists slapped and get sent to penal colony in Australia, and have to wait an extra 3 weeks or so for your keycaps!
ok guys, could anyone missing the scoops and with the crooked right shift'Cos it's not on this page yet :thumb:
please fill out this form
http://goo.gl/forms/xdBFkVjaOT (http://goo.gl/forms/xdBFkVjaOT)
also, if you fill out the form, could you please quote this post and say you have done it, not for my benefit, but to maximise the chances of people seeing the form
ok guys, could anyone missing the scoops and with the crooked right shift
please fill out this form
http://goo.gl/forms/xdBFkVjaOT (http://goo.gl/forms/xdBFkVjaOT)
also, if you fill out the form, could you please quote this post and say you have done it, not for my benefit, but to maximise the chances of people seeing the form
:'(
Thank you Bunny, I figured I'd hear this weekend. I was told I got a package and thought it was the caps, but it was a false alarm and ended up being a different package lol.
Ooh that's a good one.
On an unrelated note, is anyone else having issues with Tapatalk?
General connectivity and input, it either doesn't take the input or dupes it.
I agree, sorry for running off topic lol
ok guys, could anyone missing the scoops and with the crooked right shift'Cos it's not on this page yet :thumb:
please fill out this form
http://goo.gl/forms/xdBFkVjaOT (http://goo.gl/forms/xdBFkVjaOT)
also, if you fill out the form, could you please quote this post and say you have done it, not for my benefit, but to maximise the chances of people seeing the form
What about if SP knew there were sales to be had - have enough sets been done to do an IC for row 4 shifts in all previously run colourways and get a significant order?
ok guys, could anyone missing the scoops and with the crooked right shift'Cos it's not on this page yet :thumb:
please fill out this form
http://goo.gl/forms/xdBFkVjaOT (http://goo.gl/forms/xdBFkVjaOT)
also, if you fill out the form, could you please quote this post and say you have done it, not for my benefit, but to maximise the chances of people seeing the form
What about if SP knew there were sales to be had - have enough sets been done to do an IC for row 4 shifts in all previously run colourways and get a significant order?
Filled out the form! OHHH ROW 4 SHIFT :p
Sure, we could do that. Two shifts at $4000 per mold is $8000. About 100 orders for a set of shifts, let's say $5 per pair.ok guys, could anyone missing the scoops and with the crooked right shift'Cos it's not on this page yet :thumb:
please fill out this form
http://goo.gl/forms/xdBFkVjaOT (http://goo.gl/forms/xdBFkVjaOT)
also, if you fill out the form, could you please quote this post and say you have done it, not for my benefit, but to maximise the chances of people seeing the form
What about if SP knew there were sales to be had - have enough sets been done to do an IC for row 4 shifts in all previously run colourways and get a significant order?
Filled out the form! OHHH ROW 4 SHIFT
Can there be a separate GB for Row 4 shifts? I think there'd be enough interest :)
Sure, we could do that. Two shifts at $4000 per mold is $8000. About 100 orders for a set of shifts, let's say $5 per pair.ok guys, could anyone missing the scoops and with the crooked right shift'Cos it's not on this page yet :thumb:
please fill out this form
http://goo.gl/forms/xdBFkVjaOT (http://goo.gl/forms/xdBFkVjaOT)
also, if you fill out the form, could you please quote this post and say you have done it, not for my benefit, but to maximise the chances of people seeing the form
What about if SP knew there were sales to be had - have enough sets been done to do an IC for row 4 shifts in all previously run colourways and get a significant order?
Filled out the form! OHHH ROW 4 SHIFTShow Image(https://s3.amazonaws.com/tapatalk-emoji/emoji14.png)
Can there be a separate GB for Row 4 shifts? I think there'd be enough interest :)
Your total for an order of two shift keys is $85 plus shipping. Everyone good with that?
Sorry, awhitedev. I don't mean to be sarcastic toward you at all. It's simply a situation we can't really comprehend.
ok guys, could anyone missing the scoops and with the crooked right shift
please fill out this form
http://goo.gl/forms/xdBFkVjaOT
also, if you fill out the form, could you please quote this post and say you have done it, not for my benefit, but to maximise the chances of people seeing the form
I got the bubble mailers Saturday.
Scoops/Shift will be going out soon to everyone who filed out the google doc or used the new support form.
If you have any missing keys now is a great time to let us know too!
Sure, we could do that. Two shifts at $4000 per mold is $8000. About 100 orders for a set of shifts, let's say $5 per pair.ok guys, could anyone missing the scoops and with the crooked right shift'Cos it's not on this page yet :thumb:
please fill out this form
http://goo.gl/forms/xdBFkVjaOT (http://goo.gl/forms/xdBFkVjaOT)
also, if you fill out the form, could you please quote this post and say you have done it, not for my benefit, but to maximise the chances of people seeing the form
What about if SP knew there were sales to be had - have enough sets been done to do an IC for row 4 shifts in all previously run colourways and get a significant order?
Filled out the form! OHHH ROW 4 SHIFT
Can there be a separate GB for Row 4 shifts? I think there'd be enough interest :)
Your total for an order of two shift keys is $85 plus shipping. Everyone good with that?
Sorry, awhitedev. I don't mean to be sarcastic toward you at all. It's simply a situation we can't really comprehend.
Not sure if this is the proper place to ask this but I had ordered an OG shotty cap along with the hackd buy and have received my keyset some time ago already, in the packaging was a note saying that not all items were shipped (assuming they meant the cap) and would be sent out when available but on the website it shows as both items shipped.
My question is will I be waiting much longer for the cap and am I going to be responsible for shipping costs again?
ok guys, could anyone missing the scoops and with the crooked right shift
please fill out this form
http://goo.gl/forms/xdBFkVjaOT
also, if you fill out the form, could you please quote this post and say you have done it, not for my benefit, but to maximise the chances of people seeing the form
Any idea on when the ctrlalt support tickets will be responded to? Been trying to track down my order for over 2 weeks now
Any idea on when the ctrlalt support tickets will be responded to? Been trying to track down my order for over 2 weeks now
I was literally just reading your ticket swimmingbird and then bunnylake pinged me to check this message out.
You'll receive a tracking number shortly via the ticket.
Any idea on when the ctrlalt support tickets will be responded to? Been trying to track down my order for over 2 weeks now
im sorry to hear that, i was totally unaware, im in bed now, but if you pm me your order details ill get that chased up in the morning, on the point of tickets, i know cody is at the office shipping and working through tickets now
ok guys, could anyone missing the scoops and with the crooked right shift
please fill out this form
http://goo.gl/forms/xdBFkVjaOT
also, if you fill out the form, could you please quote this post and say you have done it, not for my benefit, but to maximise the chances of people seeing the form
These things happen, i'll shoot you a PM now, thanks!Not sure if this is the proper place to ask this but I had ordered an OG shotty cap along with the hackd buy and have received my keyset some time ago already, in the packaging was a note saying that not all items were shipped (assuming they meant the cap) and would be sent out when available but on the website it shows as both items shipped.
My question is will I be waiting much longer for the cap and am I going to be responsible for shipping costs again?
sorry about this, some of the store items were on hand with me instead of cody, rather than add waiting time to your order whilst i shipped stuff to cody, he sent orders along with that note, i had totally missed this one
if you pm me your order number ill get that shipped out to you at my own expense this week good sir
ok guys, could anyone missing the scoops and with the crooked right shift
please fill out this form
http://goo.gl/forms/xdBFkVjaOT
also, if you fill out the form, could you please quote this post and say you have done it, not for my benefit, but to maximise the chances of people seeing the form
Arrived yesterday back home and after doing the usual greetings with the Mrs she showed me the Cody Special Box, literally like a pimple faced teenager, wiping away tears of joy, I savaged the box mercilessly.You described it so well that I'm thinking of putting mine on :)
Inside I found the key-sets perfectly wrapped by Cody and it included every type of key to install into virtually any keyboard. Instantly installed the first set into an all Blue Filco and the Grey with the bright Orange had raped my eyeballs into oblivion. Perfect colour-way had been chosen by JD. I always wanted the key-set to stand out even at night and this baby delivers in spades, you can easily see the legends and the neutral grey background of the keys thrusts them into your field of vision easily.
CTRL/ALT has delivered BIG time on this set, if no one has bought into this yet, I truly feel sorry for you because you have no idea what a decent Colour-way can do for your visual and typing perception.
This is what makes Geekhack so great, implementing something truly special in the area of designing rare Key-sets..... Thank you CTRL/ALT 8) .
Hoping that I am not the only one still waiting for my order. Haven't had a reply from here or the support page at all. Just wanted to clarify if my PM order is coming and not going to be held up with the Hyperfuse GB.
Still no word on the F/J/right-shift tho
Still no word on the F/J/right-shift tho
Bunny's collecting all the data from us relating to crooked keys that need to be re-ordered from SP so don't think it's ONLY Right Shifts that are in trouble.
He will send it all to SP requesting lots of extra keys to be re-made and when he receives them, he shall ship them all out to everyone who needs them. In BunnyLake everything we require shall be provided hence patience is the key here.
Even though I've got the crooked Right Shift and another sloppy key hanging low, I can still use the keyboard easily. Know SP has forgotten about basic Q & A issues relating to our key-set BUT they are obliged to fix it all quickly and hope they finally got that aspect of their business fixed before the next range of keys are made.
I unfortunately tested the keyset on a keyboard with crooked switches, I didn't re-tested them after I re-soldered the keyboard, at this point I'm hoping the right shift is the only crooked one :)
Hoping that I am not the only one still waiting for my order. Haven't had a reply from here or the support page at all. Just wanted to clarify if my PM order is coming and not going to be held up with the Hyperfuse GB.
I also have PM order, and mine is in the post, although I don't expect to see it for another coulpe of weeks due to the usual international postage speed.
I unfortunately tested the keyset on a keyboard with crooked switches, I didn't re-tested them after I re-soldered the keyboard, at this point I'm hoping the right shift is the only crooked one :)
ALWAYS have a spare keyboard from a recognized manufacturer like Filco, Leopold, WASD or Cherry because you can easily see how they all look when installed.
SP use to be known as a 'dodgey' manufacturer in the distant past, hence you need to quickly see what you have received from them and when to contact someone, to repair any possible mistake(s).
For some reason they dropped the ball on this particular key-set release, hence I'm not going to light my flame and pick up the trusty old pitchfork just yet...... ::)
Sure, we could do that. Two shifts at $4000 per mold is $8000. About 100 orders for a set of shifts, let's say $5 per pair.ok guys, could anyone missing the scoops and with the crooked right shift'Cos it's not on this page yet :thumb:
please fill out this form
http://goo.gl/forms/xdBFkVjaOT (http://goo.gl/forms/xdBFkVjaOT)
also, if you fill out the form, could you please quote this post and say you have done it, not for my benefit, but to maximise the chances of people seeing the form
What about if SP knew there were sales to be had - have enough sets been done to do an IC for row 4 shifts in all previously run colourways and get a significant order?
Filled out the form! OHHH ROW 4 SHIFT
Can there be a separate GB for Row 4 shifts? I think there'd be enough interest :)
Your total for an order of two shift keys is $85 plus shipping. Everyone good with that?
Sorry, awhitedev. I don't mean to be sarcastic toward you at all. It's simply a situation we can't really comprehend.
A signature plastics bashing thread would be awesome, there are so many things I want to complain about :)
I'm guessing the answers to all these problems is that they are pretty lazy and they don't give too much damn
Sure, we could do that. Two shifts at $4000 per mold is $8000. About 100 orders for a set of shifts, let's say $5 per pair.ok guys, could anyone missing the scoops and with the crooked right shift'Cos it's not on this page yet :thumb:
please fill out this form
http://goo.gl/forms/xdBFkVjaOT (http://goo.gl/forms/xdBFkVjaOT)
also, if you fill out the form, could you please quote this post and say you have done it, not for my benefit, but to maximise the chances of people seeing the form
What about if SP knew there were sales to be had - have enough sets been done to do an IC for row 4 shifts in all previously run colourways and get a significant order?
Filled out the form! OHHH ROW 4 SHIFT
Can there be a separate GB for Row 4 shifts? I think there'd be enough interest :)
Your total for an order of two shift keys is $85 plus shipping. Everyone good with that?
Sorry, awhitedev. I don't mean to be sarcastic toward you at all. It's simply a situation we can't really comprehend.
The crazy part here is that if they have in-house CNC machines for making the molds, the cost should really be minimal, it's just the labour time to do the design and the material cost and I suspect they could use the 3D model of say, backspace and update it to 2.25x and 2.75x size on the PC easily enough. After all, Row 4 are the same as inverted Row 2.
If they outsource their moldmaking to an external engineering firm, then I can understand how a mold costs more, but $4000 per mold? That's a bit steep. How did they get the proper molds made for the Row 3 Shifts? IIRC, the Round 4 Sphericals had incorrect sized Row 3 Shifts and Enter.
Just got the word the set was delivered at home. Thank's to JD for designing it, and [CTRL]ALT (ESPECIALLY CODY AND BUNNY) for dealing with me through this process. Thank you guys for allowing PM orders at all. I am very excited.
P.S. Does anyone know the fastest way to get some Costar stabilizer pegs?
Just got the word the set was delivered at home. Thank's to JD for designing it, and [CTRL]ALT (ESPECIALLY CODY AND BUNNY) for dealing with me through this process. Thank you guys for allowing PM orders at all. I am very excited.
P.S. Does anyone know the fastest way to get some Costar stabilizer pegs?
WASD sells them, they're probably a decent bet.
Just got the word the set was delivered at home. Thank's to JD for designing it, and [CTRL]ALT (ESPECIALLY CODY AND BUNNY) for dealing with me through this process. Thank you guys for allowing PM orders at all. I am very excited.
P.S. Does anyone know the fastest way to get some Costar stabilizer pegs?
WASD sells them, they're probably a decent bet.
They are the only people I've found atm. But its 60+ bucks to overnight them lol. I'm thinking of just leaving the stabilized keys from my Filco set until then :/
Just got the word the set was delivered at home. Thank's to JD for designing it, and [CTRL]ALT (ESPECIALLY CODY AND BUNNY) for dealing with me through this process. Thank you guys for allowing PM orders at all. I am very excited.
P.S. Does anyone know the fastest way to get some Costar stabilizer pegs?
WASD sells them, they're probably a decent bet.
They are the only people I've found atm. But its 60+ bucks to overnight them lol. I'm thinking of just leaving the stabilized keys from my Filco set until then :/
You should be able to take the stabilizer inserts out of the old keycaps and put them in the new ones.
I generally use double sided tape. But besides MK.com and WASD there are zero options. I'll bite the big one and wait it out i guess.
Unfortunately they are glued in, I'm not sure how well and i dont want to trash the caps.
Just got the word the set was delivered at home. Thank's to JD for designing it, and [CTRL]ALT (ESPECIALLY CODY AND BUNNY) for dealing with me through this process. Thank you guys for allowing PM orders at all. I am very excited.
P.S. Does anyone know the fastest way to get some Costar stabilizer pegs?
WASD sells them, they're probably a decent bet.
They are the only people I've found atm. But its 60+ bucks to overnight them lol. I'm thinking of just leaving the stabilized keys from my Filco set until then :/
Very interested in getting this kit. Hopefully its available when I get paid!
Very interested in getting this kit. Hopefully its available when I get paid!
Group buy ended ages ago - only way to buy one now would be second hand off somebody who bought it
Were invoices sent out for scoops and shifts from the docs form? Also still missing a >. key. Not sure if I should just ask SP to send me one?
Were invoices sent out for scoops and shifts from the docs form? Also still missing a >. key. Not sure if I should just ask SP to send me one?
they havent yet, ive had baby scans and just a crazy busy week, i havent been around much, ill have a chat with cody tonight and find out when he can do all the scoops and whatnot, i can front the shipping anyway so it wont hold them up, and i can just invoice for people who said they will pay shipping once i have some more time
Very arrived!
Many thank you :)
(Attachment Link)
There's a lot of plastic there - I don't know what many of those extra keys are for! 6 arrow keys, 3 Esc, 5 Shift, epic set :D
Very arrived!
Many thank you :)
(Attachment Link)
There's a lot of plastic there - I don't know what many of those extra keys are for! 6 arrow keys, 3 Esc, 5 Shift, epic set :D
oo nice! you got a keychain too!
i cant wait for mine to show up :P
So many shift keysJD put his on a JD40.
I feel a bit blasphemous putting this on a 60% board when there's so many leftovers
Very arrived!
Many thank you :)
(Attachment Link)
There's a lot of plastic there - I don't know what many of those extra keys are for! 6 arrow keys, 3 Esc, 5 Shift, epic set :D
Very arrived!
Many thank you :)
(Attachment Link)
There's a lot of plastic there - I don't know what many of those extra keys are for! 6 arrow keys, 3 Esc, 5 Shift, epic set :D
oo nice! you got a keychain too!
i cant wait for mine to show up :P
Yes - I wasn't expecting that!
I have 2 large right Shift and scooped and non-scopped F and J.
Is there anything else I should be looking for?
Yes - I wasn't expecting that!
I have 2 large right Shift and scooped and non-scopped F and J.
Is there anything else I should be looking for?
lucky guy, i just wait for my own right Shift and scooped F and J... :blank:
Yes - I wasn't expecting that!
I have 2 large right Shift and scooped and non-scopped F and J.
Is there anything else I should be looking for?
lucky guy, i just wait for my own right Shift and scooped F and J... :blank:
Benefit, if you can call it that, of being one of the last to receive the set ;)
Yes - I wasn't expecting that!
I have 2 large right Shift and scooped and non-scopped F and J.
Is there anything else I should be looking for?
lucky guy, i just wait for my own right Shift and scooped F and J... :blank:
Benefit, if you can call it that, of being one of the last to receive the set ;)
Same thing! Was thinking I'd have to get them sent separately but pleasantly surprised when I see two shift keys in my bag of goodies :)
I've been waiting for a response on my ticket for almost a week now...
I've been waiting for a response on my ticket for almost a week now...
what is the issue
I've been waiting for a response on my ticket for almost a week now...
what is the issue
I'd to receive Hack'd asap, instead of waiting for it to ship with Hyperfuse.
After:
(Attachment Link)
I have a couple of during, but no time.
I've been waiting for a response on my ticket for almost a week now...
what is the issue
I'd to receive Hack'd asap, instead of waiting for it to ship with Hyperfuse.
ill have a word with cody next time i speak with him, ivve only caught him sparingly since last friday as hes been with his daughter but i believe he has more time over the next couple days
okThank you Bunny to do that at your own expenses. But it feels bad to let you get the hit first! We want to stand side by side with you in the Punch line, as real GeekHackers bros.
bubble mailers are on hand guys, cody says he will be shipping the scoops and the right shifts today to everyone who filled out the google doc
ill front the shipping, then when i have some time, anyone who opted to cover shipping, ill send an invoice to later, i dont have any time right now, and dont wanna hold up your keys
okThank you Bunny to do that at your own expenses. But it feels bad to let you get the hit first! We want to stand side by side with you in the Punch line, as real GeekHackers bros.
bubble mailers are on hand guys, cody says he will be shipping the scoops and the right shifts today to everyone who filled out the google doc
ill front the shipping, then when i have some time, anyone who opted to cover shipping, ill send an invoice to later, i dont have any time right now, and dont wanna hold up your keysShow Image(http://www.lifed.com/wp-content/uploads/2011/09/saving-private-ryan-1998.jpg)
I've noticed that many of the row1 keys are slightly tilted, similar to the tilted right shifts (I've actually noticed this before, but it was on another keyboard, I thought the issue was with the keyboard, I'm now now testing them on a factory built WASD V2)
Have anyone else noticed this?
Might post some pictures later on but I'm too lazy right now
(I also put the numpad keys on a leopold numpad with cherry mx blues, it's such a beauty right now, I'm convinced cherry mx blues are the optimal switch type for SA's after testing them on many switch types :)
(I also put the numpad keys on a leopold numpad with cherry mx blues, it's such a beauty right now, I'm convinced cherry mx blues are the optimal switch type for SA's after testing them on many switch types :)
I decided to test the SA keycaps once more before investing a significant amount on True Retro's
I've noticed that many of the row1 keys are slightly tilted, similar to the tilted right shifts (I've actually noticed this before, but it was on another keyboard, I thought the issue was with the keyboard, I'm now now testing them on a factory built WASD V2)
Have anyone else noticed this?
Might post some pictures later on but I'm too lazy right now
(I also put the numpad keys on a leopold numpad with cherry mx blues, it's such a beauty right now, I'm convinced cherry mx blues are the optimal switch type for SA's after testing them on many switch types :)
I decided to test the SA keycaps once more before investing a significant amount on True Retro's
I've noticed that many of the row1 keys are slightly tilted, similar to the tilted right shifts (I've actually noticed this before, but it was on another keyboard, I thought the issue was with the keyboard, I'm now now testing them on a factory built WASD V2)
Have anyone else noticed this?
Might post some pictures later on but I'm too lazy right now
(I also put the numpad keys on a leopold numpad with cherry mx blues, it's such a beauty right now, I'm convinced cherry mx blues are the optimal switch type for SA's after testing them on many switch types :)
I was hoping to test HBG out before the last day of SA retro to see if the profile fits me. I'll have to debate on ordering the Retro set on the last day if my HBG set doesn't arrive by then.
Have you noticed if the sculpted profile makes any difference with keyboard angle?
Does the tilt on the keys affect its functionality much or is it just aesthetics?
Just wondering since I've never typed on SA before.
The sculpture is definitely extreme, for example, with DSA's, I use my 60% cases with bumped adhesives, with SA's, I might need to switch to non-bumped adhesives, which would complicated things a bit, it's not easy to replace those adhesives, the row1 is very sharp from the top, so a flat case might be optimal
Here is my general analysis:
1) SA is very fun to type on, even on a WASD V2 with a built-in slope, the sculpture wasn't disturbing - +1 for my True Retro desire
1.1) I can't use cherry stabs with DSA keycaps, there is this plastic rubbing sound that disturbs me, however, cherry stabs shine with SA keycaps, similar for costars, SA keycaps are very stab friendly
2) On a white page, the illumination from the monitor glares too much on the glossy keys, is HBG glossy and Retro semi-matte // different?
3) The row1 keys look too excited, they are all tilted at random x/y/z directions, this seems like a major issue for those who care about this kind of stuff
Here are some photos:
Beauty:
(Attachment Link)
Beast:
(Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link)
I couldn't capture the row1 issue well, the sheer height of the row1 really amplifies any displacement, I'm guessing the length of the stem also amplifies molding/cooling issues a lot, and SP rushed these a bit, causing the issue
hey guys
quick update
everyone who filled out the googledoc or support form
your scoops and shifts have been packed and sentShow Image(http://i.imgur.com/lEchKRl.jpg)
thank you for your patience
i have covered all the shipping so far
but when i have more time in about a week ill shot an invoice to the people who opted to pay
hey guys
quick update
everyone who filled out the googledoc or support form
your scoops and shifts have been packed and sentShow Image(http://i.imgur.com/lEchKRl.jpg)
thank you for your patience
i have covered all the shipping so far
but when i have more time in about a week ill shot an invoice to the people who opted to pay
hey guys
quick update
everyone who filled out the googledoc or support form
your scoops and shifts have been packed and sentShow Image(http://i.imgur.com/lEchKRl.jpg)
thank you for your patience
i have covered all the shipping so far
but when i have more time in about a week ill shot an invoice to the people who opted to pay
hey guys
quick update
everyone who filled out the googledoc or support form
your scoops and shifts have been packed and sent
(http://i.imgur.com/lEchKRl.jpg) (http://i.imgur.com/lEchKRl.jpg)
thank you for your patience
i have covered all the shipping so far
but when i have more time in about a week ill shot an invoice to the people who opted to pay
As always Bunny you have delivered yet again.
Can easily develop such enormous affection for you it would be embarrassing to mention it here on Geekhack ;) .
As always Bunny you have delivered yet again.
Can easily develop such enormous affection for you it would be embarrassing to mention it here on Geekhack ;) .
No no Elrick, don't be embarrassed. We are all friends here. No judgement.
Feel free to express yourself openly!
hey guysThanks Bunny. Looking forward to pay that invoice.
quick update
everyone who filled out the googledoc or support form
your scoops and shifts have been packed and sentShow Image(http://i.imgur.com/lEchKRl.jpg)
thank you for your patience
i have covered all the shipping so far
but when i have more time in about a week ill shot an invoice to the people who opted to pay
I'm wondering how many other people are waiting for their Hack'd to come with the Hyper Fuse GB like myself.
I've been trying to hold off on signing up for more group buy because I've spent quite a bit this year. However, since it takes a while to get a group buy, I'm compelled to shop for more group buys because it takes a while before you get an order. Anyway, going to take some time getting used to being patient :rolleyes:
Excited for this set to come in!
I'm wondering how many other people are waiting for their Hack'd to come with the Hyper Fuse GB like myself.
I've been trying to hold off on signing up for more group buy because I've spent quite a bit this year. However, since it takes a while to get a group buy, I'm compelled to shop for more group buys because it takes a while before you get an order. Anyway, going to take some time getting used to being patient :rolleyes:
Excited for this set to come in!
9 people total opted still to do that
only a month to go
I'm waiting too. Both Hack'd and Miami are waiting on hyperfuse.
I still need to build up the boards for the new sets to go on anyway, so it's not a big deal to me. Also it means that sometime I'm going to have a really good mail day :)
Question... I have been using my hack'd set since I got it on my KUL. All is working amazingly fine except for the space bar... it seems to stick, and I think it's sticking on the stabilizers... this is weird, and I am relatively new to SA profile caps. Is this normal?
Question... I have been using my hack'd set since I got it on my KUL. All is working amazingly fine except for the space bar... it seems to stick, and I think it's sticking on the stabilizers... this is weird, and I am relatively new to SA profile caps. Is this normal?
this is just general advice, but ive got in the habbit on all my spacebars of putting a little piece of either tape or a baggy on the top of the stabs, i do this on all my spacebars as a kinda quick fix for everything
whether i have a sticker or loose spacebar, it seems to be a 1 stop fix for everything with me, may not be the issue without me having more info, but certainly worth a try, as i say i do it to all my boards now just as standard whatever set im using
I noticed the spacebar sticks on my KUL as well (not all the time but occasionally.)Question... I have been using my hack'd set since I got it on my KUL. All is working amazingly fine except for the space bar... it seems to stick, and I think it's sticking on the stabilizers... this is weird, and I am relatively new to SA profile caps. Is this normal?
this is just general advice, but ive got in the habbit on all my spacebars of putting a little piece of either tape or a baggy on the top of the stabs, i do this on all my spacebars as a kinda quick fix for everything
whether i have a sticker or loose spacebar, it seems to be a 1 stop fix for everything with me, may not be the issue without me having more info, but certainly worth a try, as i say i do it to all my boards now just as standard whatever set im using
Thanks bunny, do you have a pic just to make sure I do it right?
Ps. This spacebar works fine on my Poker.
I noticed the spacebar sticks on my KUL as well (not all the time but occasionally.)Question... I have been using my hack'd set since I got it on my KUL. All is working amazingly fine except for the space bar... it seems to stick, and I think it's sticking on the stabilizers... this is weird, and I am relatively new to SA profile caps. Is this normal?
this is just general advice, but ive got in the habbit on all my spacebars of putting a little piece of either tape or a baggy on the top of the stabs, i do this on all my spacebars as a kinda quick fix for everything
whether i have a sticker or loose spacebar, it seems to be a 1 stop fix for everything with me, may not be the issue without me having more info, but certainly worth a try, as i say i do it to all my boards now just as standard whatever set im using
Thanks bunny, do you have a pic just to make sure I do it right?
Ps. This spacebar works fine on my Poker.
64rky, stick the tape/baggie on top of the stab stems, but cut it small so it fits inside the housing around it (crudely marked in red in my photo) or the tape will get hung up on it. I can't explain it, but so far so good in my 2 minutes of testing, no stick even if I really mash the spacebar all the way down.Show Image(http://i.imgur.com/C9097wK.jpg?1)
I noticed the spacebar sticks on my KUL as well (not all the time but occasionally.)Question... I have been using my hack'd set since I got it on my KUL. All is working amazingly fine except for the space bar... it seems to stick, and I think it's sticking on the stabilizers... this is weird, and I am relatively new to SA profile caps. Is this normal?
this is just general advice, but ive got in the habbit on all my spacebars of putting a little piece of either tape or a baggy on the top of the stabs, i do this on all my spacebars as a kinda quick fix for everything
whether i have a sticker or loose spacebar, it seems to be a 1 stop fix for everything with me, may not be the issue without me having more info, but certainly worth a try, as i say i do it to all my boards now just as standard whatever set im using
Thanks bunny, do you have a pic just to make sure I do it right?
Ps. This spacebar works fine on my Poker.
64rky, stick the tape/baggie on top of the stab stems, but cut it small so it fits inside the housing around it (crudely marked in red in my photo) or the tape will get hung up on it. I can't explain it, but so far so good in my 2 minutes of testing, no stick even if I really mash the spacebar all the way down.Show Image(http://i.imgur.com/C9097wK.jpg?1)
I noticed the spacebar sticks on my KUL as well (not all the time but occasionally.)Question... I have been using my hack'd set since I got it on my KUL. All is working amazingly fine except for the space bar... it seems to stick, and I think it's sticking on the stabilizers... this is weird, and I am relatively new to SA profile caps. Is this normal?
this is just general advice, but ive got in the habbit on all my spacebars of putting a little piece of either tape or a baggy on the top of the stabs, i do this on all my spacebars as a kinda quick fix for everything
whether i have a sticker or loose spacebar, it seems to be a 1 stop fix for everything with me, may not be the issue without me having more info, but certainly worth a try, as i say i do it to all my boards now just as standard whatever set im using
Thanks bunny, do you have a pic just to make sure I do it right?
Ps. This spacebar works fine on my Poker.
64rky, stick the tape/baggie on top of the stab stems, but cut it small so it fits inside the housing around it (crudely marked in red in my photo) or the tape will get hung up on it. I can't explain it, but so far so good in my 2 minutes of testing, no stick even if I really mash the spacebar all the way down.Show Image(http://i.imgur.com/C9097wK.jpg?1)
I had the same issue on my KUL with DSA Dolch. I used the same trick to fix it.
Slightly regretting bundling my Hack'd order with HyperFuse.... :)
hey guys
quick update
everyone who filled out the googledoc or support form
your scoops and shifts have been packed and sentShow Image(http://i.imgur.com/lEchKRl.jpg)
thank you for your patience
i have covered all the shipping so far
but when i have more time in about a week ill shot an invoice to the people who opted to pay
Just got my scoops... but the full set still hasn't arrived... is this normal?
Why do I always miss the best group buys, Any spare sets kicking about?
Why do I always miss the best group buys, Any spare sets kicking about?
Highly unlikely, very interestingly, I haven't seen any Hack'd by Geeks sets change hands after the sets were shipped (not saying they didn't, yet probably the satisfaction rate is high, most people are keeping their sets)
Why do I always miss the best group buys, Any spare sets kicking about?
Highly unlikely, very interestingly, I haven't seen any Hack'd by Geeks sets change hands after the sets were shipped (not saying they didn't, yet probably the satisfaction rate is high, most people are keeping their sets)
I understand why, it's a beautiful set, being new to the scene I've missed out on a lot of great ones. There's bound to be someone though needing a bit of cash and is willing to part with their set
Why do I always miss the best group buys, Any spare sets kicking about?
Highly unlikely, very interestingly, I haven't seen any Hack'd by Geeks sets change hands after the sets were shipped (not saying they didn't, yet probably the satisfaction rate is high, most people are keeping their sets)
Ok, Thank you for your help
I understand why, it's a beautiful set, being new to the scene I've missed out on a lot of great ones. There's bound to be someone though needing a bit of cash and is willing to part with their set
Not sure if Bunny ordered extra sets for the store or not with this one, those will likely go up once it reopens if he did. Otherwise, keep an eye out on the classifieds. You can't post a WTB until you've met the 2 months + 25 posts requirement, but you're able to post in other people's threads and buy from members.
Just got my scoops... but the full set still hasn't arrived... is this normal?
nope haha, ill get it mentioned to cody, i think i remember you saying you already filled in the form so he should be on top of it
So I have had these keys on my KUL with MX Clears for about a month back. I am new to SA profile keys, and got to the point where the keys were too hard to press (compared to OEM profile keys on Clears). I just put these on my Ducky with browns, and oh my god what a difference... I was really worried that I wouldn't like SA profile and was going to sell them off... glad I tried this first, as I love this color...
One other thing, and I don't know if anyone else has this issue, and this is not isolated to these keys, i've had them on many thick PBT caps as well. On the Ducky 3, the + and Enter on the keypad always sticks as the housing gets in the way, it's kind of like you have to sand down the side of the key. Anyone else had this issue?
So I have had these keys on my KUL with MX Clears for about a month back. I am new to SA profile keys, and got to the point where the keys were too hard to press (compared to OEM profile keys on Clears). I just put these on my Ducky with browns, and oh my god what a difference... I was really worried that I wouldn't like SA profile and was going to sell them off... glad I tried this first, as I love this color...
One other thing, and I don't know if anyone else has this issue, and this is not isolated to these keys, i've had them on many thick PBT caps as well. On the Ducky 3, the + and Enter on the keypad always sticks as the housing gets in the way, it's kind of like you have to sand down the side of the key. Anyone else had this issue?
Although my experience in general is the opposite of yours - on lighter switches (blues and reds) the thick SA keycaps are way too heavy and really dampen the keyboard. On blacks or greens they are just fine.
Although my experience in general is the opposite of yours - on lighter switches (blues and reds) the thick SA keycaps are way too heavy and really dampen the keyboard. On blacks or greens they are just fine.
Word of advice here, ALWAYS get either Black, Green and/or Grey switched keyboard when it comes to using any SA Profiled beauties :thumb: .
Stock blacks? I see some of them modded to be a bit heavier. Is that personal preference or is there an actual spring weight that has been proven to be better than stock?
Stock blacks? I see some of them modded to be a bit heavier. Is that personal preference or is there an actual spring weight that has been proven to be better than stock?
Stock Blacks are basically at 60g and out of the famous ones released in huge numbers - the Red, Brown and Blue Cherry MX switches that comes out of the German Factory would be less in spring weight.
The custom and rare editions such as the Clears (55g), Whites (80g), Greens (80g) and Greys (105g) which are my faves come in with those spring weights. IF you are talking about swapping out the standard spring and putting in a stiffer one, then you have a customized switch ready to be used by you in any keyboard.
If you're a cheap bastard then simply buy a budget Red switched keyboard then pop off the black switch tops and replace the softer springs with something that shall snap your lazy finger off. You can buy 150g Korean Springs from a supplier here on Geekhack.
Here is a photo that demonstrates the issue:
(Attachment Link)
Also exists here as reference: http://i.imgur.com/mB0HVwU.jpg
Once again, I apologise for bringing stuff up like this, as far as I inspect the keycaps, only the 2.25 Enter has it, likely because it was a newly printed keycap type
------
I think it's too late to get this fixed for the Hack'd by Geeks keyset, maybe if I noticed this earlier something could have been done, if it's indeed an issue, but it would be great if we could at least get these kind of issues fixed for future keycap sets - I think the font style and size should be uniform wherever possible, the 2.25 Enter definitely has a slightly lower font-weight
Here is a photo that demonstrates the issue:
(Attachment Link)
Also exists here as reference: http://i.imgur.com/mB0HVwU.jpg
Once again, I apologise for bringing stuff up like this, as far as I inspect the keycaps, only the 2.25 Enter has it, likely because it was a newly printed keycap type
------
I think it's too late to get this fixed for the Hack'd by Geeks keyset, maybe if I noticed this earlier something could have been done, if it's indeed an issue, but it would be great if we could at least get these kind of issues fixed for future keycap sets - I think the font style and size should be uniform wherever possible, the 2.25 Enter definitely has a slightly lower font-weight
I love how particular you are Sir... I remember posting the below image and getting your disapproval, :pShow Image(http://i.imgur.com/vJ3TdMo.jpg)
Here is a photo that demonstrates the issue:
(Attachment Link)
Also exists here as reference: http://i.imgur.com/mB0HVwU.jpg
Once again, I apologise for bringing stuff up like this, as far as I inspect the keycaps, only the 2.25 Enter has it, likely because it was a newly printed keycap type
------
I think it's too late to get this fixed for the Hack'd by Geeks keyset, maybe if I noticed this earlier something could have been done, if it's indeed an issue, but it would be great if we could at least get these kind of issues fixed for future keycap sets - I think the font style and size should be uniform wherever possible, the 2.25 Enter definitely has a slightly lower font-weight
I love how particular you are Sir... I remember posting the below image and getting your disapproval, :pShow Image(http://i.imgur.com/vJ3TdMo.jpg)
That 0 is slightly crooked, son :)
I was never so happy and disappointed in myself at the same time as then... :)
I'm still missing a set, can someone help me out?
Stock blacks? I see some of them modded to be a bit heavier. Is that personal preference or is there an actual spring weight that has been proven to be better than stock?
Stock Blacks are basically at 60g and out of the famous ones released in huge numbers - the Red, Brown and Blue Cherry MX switches that comes out of the German Factory would be less in spring weight.
The custom and rare editions such as the Clears (55g), Whites (80g), Greens (80g) and Greys (105g) which are my faves come in with those spring weights. IF you are talking about swapping out the standard spring and putting in a stiffer one, then you have a customized switch ready to be used by you in any keyboard.
If you're a cheap bastard then simply buy a budget Red switched keyboard then pop off the black switch tops and replace the softer springs with something that shall snap your lazy finger off. You can buy 150g Korean Springs from a supplier here on Geekhack.
Haha, 150g... that sounds like a prank keyboard or needs a mallet to type with. I have blacks that are patiently awaiting my keyset, right now im typing on F, J, and Shift and it feels pretty good so far...
If the mockup had been done with more accurate colours, this issue could have been caught at the design stage.
I'm actually getting RATHER IRRITATED with designers not using the most accurate colours when creating mockups and ending up with misleading designs. It's not hard, you just take the colour codes from here and apply them to your mockup: http://deskthority.net/wiki/Signature_Plastics_ABS_colours
Here's a little comparison of the actual mockup and a colour-corrected one.
Original:
(Attachment Link)
Colour corrected:
(Attachment Link)
Does anyone else think the new replacement Right Shift looks matte?
I don't really mind, just an observationDoes anyone else think the new replacement Right Shift looks matte?
i havent seen these myself
but ill ask cody to confirm, if sp made them in the wrong finish they will definitely replace them
If the mockup had been done with more accurate colours, this issue could have been caught at the design stage.
I'm actually getting RATHER IRRITATED with designers not using the most accurate colours when creating mockups and ending up with misleading designs. It's not hard, you just take the colour codes from here and apply them to your mockup: http://deskthority.net/wiki/Signature_Plastics_ABS_colours
Here's a little comparison of the actual mockup and a colour-corrected one.
Original:
(Attachment Link)
Colour corrected:
(Attachment Link)
I don't really mind, just an observationDoes anyone else think the new replacement Right Shift looks matte?
i havent seen these myself
but ill ask cody to confirm, if sp made them in the wrong finish they will definitely replace them
I agree with Bunny on this. Mine seem to be very accurate to the mockup. Under artificial light and direct sunlight. With incandescent light it is a bit closer to the orange tinge you filtered it with but only just so.
If the mockup had been done with more accurate colours, this issue could have been caught at the design stage.
I'm actually getting RATHER IRRITATED with designers not using the most accurate colours when creating mockups and ending up with misleading designs. It's not hard, you just take the colour codes from here and apply them to your mockup: http://deskthority.net/wiki/Signature_Plastics_ABS_colours
Here's a little comparison of the actual mockup and a colour-corrected one.
Original:
(Attachment Link)
Colour corrected:
(Attachment Link)
I'm in a dimly lit room as well, but I don't have any issues with the contrast. The colors I see look closer to the original to me.
That being said, the SP color wheel is a reference at best. It's not an exact Pantone match and different batches can be slightly different in color. But it's all in the eye of the beholder isn't it? :p
...
the reason we dont use the colours from the link you provided, is because they are inaccurate
we use the actual colour chips to match our colours for this
...
I feel I must apologise to Bunny,
Sir, I am sorry for my attitude. I discovered I have flu and I am perticularly grumpy at the moment. You've run a good GB and the mockups are close enough not to really matter. My disappointment at the visibility on my home PC with poorer lighting conditions appears to be due to the closeness in colour intensity between the orange and light grey and the relatively thin legends on the keys.
It is acceptable at my office in better light. I need to lighten up a bit in general (IRL too).
Best Regards,
Oobly.
I feel I must apologise to Bunny,
Sir, I am sorry for my attitude. I discovered I have flu and I am perticularly grumpy at the moment. You've run a good GB and the mockups are close enough not to really matter. My disappointment at the visibility on my home PC with poorer lighting conditions appears to be due to the closeness in colour intensity between the orange and light grey and the relatively thin legends on the keys.
It is acceptable at my office in better light. I need to lighten up a bit in general (IRL too).
Best Regards,
Oobly.
Hey, it takes a very grounded individual to apologize on the internet. Hats off to you, sir.
I for one appreciate the effort you made with your alternate mock up. I (personally, to my eyes) think it does match up with some of the pictures of the set in lower light conditions. Maybe it would of been better received in the interest check phase though.
I'm still missing a set, can someone help me out?
Did you open a support ticket yet?
I'm still missing a set, can someone help me out?
Did you open a support ticket yet?
Yes, but no confirmation email has been sent to me.
I'm still missing a set, can someone help me out?
Did you open a support ticket yet?
Yes, but no confirmation email has been sent to me.
thats all you needed to do
ive posted in our forum replies are gonna be slow this week why we get v2 launched
just sit tight and cody will get to it
I'm still missing a set, can someone help me out?
Did you open a support ticket yet?
Yes, but no confirmation email has been sent to me.
thats all you needed to do
ive posted in our forum replies are gonna be slow this week why we get v2 launched
just sit tight and cody will get to it
I still haven't received my dish keys or shift, how do I go about this?
I still haven't received my dish keys or shift, how do I go about this?
Did you fill out the form for requesting them?
If so, then you just have to wait for them to arrive via mail.
I still haven't received my dish keys or shift, how do I go about this?
Did you fill out the form for requesting them?
If so, then you just have to wait for them to arrive via mail.
Nope, I wasn't aware there is a form. The OP doesn't mention anything about it. I assumed since no one got dished keys we wouldn't need to request them, they should just go out to everyone. Can someone provide the details? Digging through 45 pages isn't exactly realistic.
ok guys, could anyone missing the scoops and with the crooked right shift
please fill out this form
http://goo.gl/forms/xdBFkVjaOT
also, if you fill out the form, could you please quote this post and say you have done it, not for my benefit, but to maximise the chances of people seeing the form
I still haven't received my dish keys or shift, how do I go about this?
Did you fill out the form for requesting them?
If so, then you just have to wait for them to arrive via mail.
Nope, I wasn't aware there is a form. The OP doesn't mention anything about it. I assumed since no one got dished keys we wouldn't need to request them, they should just go out to everyone. Can someone provide the details? Digging through 45 pages isn't exactly realistic.ok guys, could anyone missing the scoops and with the crooked right shift
please fill out this form
http://goo.gl/forms/xdBFkVjaOT
also, if you fill out the form, could you please quote this post and say you have done it, not for my benefit, but to maximise the chances of people seeing the form
JD can you put this in the OP? Might be a bit less confusing that way.
...
Anyway, I just wanted to ask people how they use their Hack'd by Geeks keyset
Do you guys use them with flat keyboard or angled keyboards?
Just wanted to say thanks to Cody, got my scoops and shifts yesterday!
Anyone else still waiting on scoops and shift? I filled out the google doc the day it opened and the bubblers mailed almost 2 and half weeks ago. I live in the continental US so I can't imagine it taking that long to get to me.
Anyone else still waiting on scoops and shift? I filled out the google doc the day it opened and the bubblers mailed almost 2 and half weeks ago. I live in the continental US so I can't imagine it taking that long to get to me.
I got my scoops and shift but still waiting on the full set. I didn't opt to have it ship with hyperfuse either, still not sure whats going on. Whatever the problem is, I wish that there was something I could do to help.
ok guys, could anyone missing the scoops and with the crooked right shift
please fill out this form
http://goo.gl/forms/xdBFkVjaOT
also, if you fill out the form, could you please quote this post and say you have done it, not for my benefit, but to maximise the chances of people seeing the form
ok guys, could anyone missing the scoops and with the crooked right shift
please fill out this form
http://goo.gl/forms/xdBFkVjaOT
also, if you fill out the form, could you please quote this post and say you have done it, not for my benefit, but to maximise the chances of people seeing the form
Having not used this set yet, and having not looked at the thread in a long time, I only just found out about this. My set does indeed have the missing scoops (took some digging to find out that was refering to the F and J keys that are supposed to have deeper dishes than the other keys in that row) and has a shifted shift key, so I filled it out.
...
Anyway, I just wanted to ask people how they use their Hack'd by Geeks keyset
Do you guys use them with flat keyboard or angled keyboards?
Most of Hack'd lives on my Ducky with the legs tucked up so it's at a slight angle, I have not needed to write anything significant since it arrived so can't really say if it's perfect but It seems pretty comfortable.
Out of interest I just tried with the legs up for a greater angle but that really wasn't comfortable - I did not finish this line before putting them down again.
has there ever been talks of a round 2 hacked? These are turning out to be rare and I NEEEEED a set.
has there ever been talks of a round 2 hacked? These are turning out to be rare and I NEEEEED a set.
I don't think there will be a round 2.
has there ever been talks of a round 2 hacked? These are turning out to be rare and I NEEEEED a set.
I don't think there will be a round 2.
That's a shame, thanks for letting me know.
has there ever been talks of a round 2 hacked? These are turning out to be rare and I NEEEEED a set.
I don't think there will be a round 2.
I don't know if Bunny has any extra sets but I would check if you haven't already.
has there ever been talks of a round 2 hacked? These are turning out to be rare and I NEEEEED a set.
I don't think there will be a round 2.
That's a shame, thanks for letting me know.
sed8op8 sold her set for quite a fair price, the original cost
with this set, like all other sets, the only logical path now is to stalk the classifieds and mechmarket, as most sellers just post a listing and sell things in 5 minutes
I always dismiss the idea, but one of these days I might write a local bot that does these tasks for me, check the mechmarket for my favourite sets, check whether SP has released some extras etc.
Did Bunny already invoice the people willing to pay their share on the shipping cost for the scoops?
Did Bunny already invoice the people willing to pay their share on the shipping cost for the scoops?
I don't think so
So there still hasn't been movement on the fixed shift and missing scoops?
I PM'd him a week ago and haven't gotten a response.
I imagine that the 9 or so people waiting on Hyperfuse will receive Hack'd set, as well as the corrections (contours) within the same package? I didn't fill out the form earlier since I figured that'd be the simples thing to do on Cody/Bunny's end.I am one of the 9 and I did the same thing you did. I think we are good. :) I'm pretty sure up there in the thread somewhere that was the direction we were given.
I imagine that the 9 or so people waiting on Hyperfuse will receive Hack'd set, as well as the corrections (contours) within the same package? I didn't fill out the form earlier since I figured that'd be the simples thing to do on Cody/Bunny's end.I am one of the 9 and I did the same thing you did. I think we are good. :) I'm pretty sure up there in the thread somewhere that was the direction we were given.
Still no scoops for me.
Perhaps the package did go out but there was a problem during its way to you. Do you have a shipping tracking number?Still no scoops for me.
Same here. Starting to get a little frustrating. Filled out the google doc first day it was out. Never received anything after waiting for that.
Used the ctrlalt.io support page a little over a month ago and told that it would ship out, and still haven't got anything.
Tried PMing codyeatworld a couple weeks ago and never heard anything.
Used the support page again a few days back haven't heard anything back.
Anything else I can do?
Perhaps the package did go out but there was a problem during its way to you. Do you have a shipping tracking number?Still no scoops for me.
Same here. Starting to get a little frustrating. Filled out the google doc first day it was out. Never received anything after waiting for that.
Used the ctrlalt.io support page a little over a month ago and told that it would ship out, and still haven't got anything.
Tried PMing codyeatworld a couple weeks ago and never heard anything.
Used the support page again a few days back haven't heard anything back.
Anything else I can do?
What happened to the part where we would help you on these fees? I remember during a private conversation that you mentioned the fact that the invoices didn't go out. Don't you want our money anymore? :'(Perhaps the package did go out but there was a problem during its way to you. Do you have a shipping tracking number?Still no scoops for me.
Same here. Starting to get a little frustrating. Filled out the google doc first day it was out. Never received anything after waiting for that.
Used the ctrlalt.io support page a little over a month ago and told that it would ship out, and still haven't got anything.
Tried PMing codyeatworld a couple weeks ago and never heard anything.
Used the support page again a few days back haven't heard anything back.
Anything else I can do?
we didnt send the scoops tracked that i know of
in the end i paid for all the shipping myself and didnt charge anyone
i know cody sent them all but got something like 5 sets back as undelivered, whose those are i dont know
i have however been speaking to the person above now via email and gave him some other contact details for cody
What happened to the part where we would help you on these fees? I remember during a private conversation that you mentioned the fact that the invoices didn't go out. Don't you want our money anymore? :'(Perhaps the package did go out but there was a problem during its way to you. Do you have a shipping tracking number?Still no scoops for me.
Same here. Starting to get a little frustrating. Filled out the google doc first day it was out. Never received anything after waiting for that.
Used the ctrlalt.io support page a little over a month ago and told that it would ship out, and still haven't got anything.
Tried PMing codyeatworld a couple weeks ago and never heard anything.
Used the support page again a few days back haven't heard anything back.
Anything else I can do?
we didnt send the scoops tracked that i know of
in the end i paid for all the shipping myself and didnt charge anyone
i know cody sent them all but got something like 5 sets back as undelivered, whose those are i dont know
i have however been speaking to the person above now via email and gave him some other contact details for cody
So how about those who want to pay for their part, can just send the money without an invoice
What happened to the part where we would help you on these fees? I remember during a private conversation that you mentioned the fact that the invoices didn't go out. Don't you want our money anymore? :'(Perhaps the package did go out but there was a problem during its way to you. Do you have a shipping tracking number?Still no scoops for me.
Same here. Starting to get a little frustrating. Filled out the google doc first day it was out. Never received anything after waiting for that.
Used the ctrlalt.io support page a little over a month ago and told that it would ship out, and still haven't got anything.
Tried PMing codyeatworld a couple weeks ago and never heard anything.
Used the support page again a few days back haven't heard anything back.
Anything else I can do?
we didnt send the scoops tracked that i know of
in the end i paid for all the shipping myself and didnt charge anyone
i know cody sent them all but got something like 5 sets back as undelivered, whose those are i dont know
i have however been speaking to the person above now via email and gave him some other contact details for cody
firstly, it wasnt as much as i was expecting to ship them, i think including international it cost me sub $400 to ship all the scoops out
so its partly that its a ton of work to invoice like 150 people for $2-$5 and partly because its not peoples fault sp left them out of the original buy and i dont like people having to pay more than they expected through no fault of their own
So how about those who want to pay for their part, can just send the money without an invoice
if anyone is totally desperate to they can either pm me for my paypal or there is a link to my steam trade thing in my profile
however, it really isnt necessary at all, its so long ago now i had largely forgotten about it
So how about those who want to pay for their part, can just send the money without an invoiceYou could also donate through the website during the next sale.
Perhaps the package did go out but there was a problem during its way to you. Do you have a shipping tracking number?Still no scoops for me.
Same here. Starting to get a little frustrating. Filled out the google doc first day it was out. Never received anything after waiting for that.
Used the ctrlalt.io support page a little over a month ago and told that it would ship out, and still haven't got anything.
Tried PMing codyeatworld a couple weeks ago and never heard anything.
Used the support page again a few days back haven't heard anything back.
Anything else I can do?
we didnt send the scoops tracked that i know of
in the end i paid for all the shipping myself and didnt charge anyone
i know cody sent them all but got something like 5 sets back as undelivered, whose those are i dont know
i have however been speaking to the person above now via email and gave him some other contact details for cody
if anyone is totally desperate to they can either pm me for my paypal or there is a link to my steam trade thing in my profile
however, it really isnt necessary at all, its so long ago now i had largely forgotten about it
if anyone is totally desperate to they can either pm me for my paypal or there is a link to my steam trade thing in my profile
however, it really isnt necessary at all, its so long ago now i had largely forgotten about it
I think I forgotten to mention here in this section that all the scoops and new straight shifts were sent to me ages ago and I never bothered to publicly thank our hero known as BunnyLake.
This Group Buy has cost him dearly BUT he still makes sure everybody gets their orders and if there is a mistake he shall correct it. He's the ONLY one who cares if you are happy about your order, so you have to love someone for doing that these days.
That is why when there is another key-set being sold and made by these guys, you have to jump in because they simply do amazing colour-ways that few can mimic or create.
Welcome back. You know, we almost put your face on a milk carton (https://geekhack.org/index.php?topic=72000.msg1826337#msg1826337).
I still haven't heard anything back from Cody. I filled out the form to offer my payment, sent Cody a PM as well. Radio silence, what's the deal?In the Hyperfuse GB thread he said he's getting to PMs today so I imagine he's got a backlog to work through.
Responding to ALL pm's now.
I still haven't heard anything back from Cody. I filled out the form to offer my payment, sent Cody a PM as well. Radio silence, what's the deal?
I still haven't heard anything back from Cody. I filled out the form to offer my payment, sent Cody a PM as well. Radio silence, what's the deal?
If you refer to the payment for the shipping of the scoops, they didn't invoice anyone so far. I'm not sure they will as Bunny told me it was not as expensive as he expected.
I still haven't heard anything back from Cody. I filled out the form to offer my payment, sent Cody a PM as well. Radio silence, what's the deal?
If you refer to the payment for the shipping of the scoops, they didn't invoice anyone so far. I'm not sure they will as Bunny told me it was not as expensive as he expected.
Yeah I mean both. I haven't received an invoice OR the caps.
I still haven't heard anything back from Cody. I filled out the form to offer my payment, sent Cody a PM as well. Radio silence, what's the deal?
If you refer to the payment for the shipping of the scoops, they didn't invoice anyone so far. I'm not sure they will as Bunny told me it was not as expensive as he expected.
Yeah I mean both. I haven't received an invoice OR the caps.
Were there many people with missing keys? The ticket I opened was updated a while ago with a response that said missing caps were being counted and they'd all be ordered at once. I'm only missing the .> key.
if you are talking about the scoops, i didnt invoice anyone, in the end i paid for it
cody sent them all out, he told me 5 were returned, i dont know what 5
I still haven't heard anything back from Cody. I filled out the form to offer my payment, sent Cody a PM as well. Radio silence, what's the deal?
If you refer to the payment for the shipping of the scoops, they didn't invoice anyone so far. I'm not sure they will as Bunny told me it was not as expensive as he expected.
Yeah I mean both. I haven't received an invoice OR the caps.
if you are talking about the scoops, i didnt invoice anyone, in the end i paid for it
cody sent them all out, he told me 5 were returned, i dont know what 5
i think what im gonna do as a few people seem to not have them, is ask cody to send whatever he has left to me, then i can ship them out to people
if you are talking about your set, i can send you the tracking number, but usps tracking says this
Your item was delivered at the front door or porch at 1:27 pm on April 25, 2015
it then says your town and zip code but i removed that for the sake of privacy
the tracking would have been emailed to you but if not you cn view it by logging in to ctrl alt and viewing your hackd order
Was there a scooped 5 for the number pad with this set? I cannot seem to find one in my set and it's driving me a little mad >.<
Was there a scooped 5 for the number pad with this set? I cannot seem to find one in my set and it's driving me a little mad >.<
not to my knowledge
oh for the few who didnt end up getting scoops
cody is about to ship my retro set to me, ill get him to throw all the remaining scoops to me so i can get them to anyone who needs them
oh for the few who didnt end up getting scoops
cody is about to ship my retro set to me, ill get him to throw all the remaining scoops to me so i can get them to anyone who needs them
He said anyone who needs them. So if you need them bunny will take care of you.oh for the few who didnt end up getting scoops
cody is about to ship my retro set to me, ill get him to throw all the remaining scoops to me so i can get them to anyone who needs them
Does this include people like me who didn't find out about the form until after people had been shipped the scoops/shift? I've still heard nothing after multiple attempts to contact Cody in different ways.
oh for the few who didnt end up getting scoops
cody is about to ship my retro set to me, ill get him to throw all the remaining scoops to me so i can get them to anyone who needs them
Does this include people like me who didn't find out about the form until after people had been shipped the scoops/shift? I've still heard nothing after multiple attempts to contact Cody in different ways.
Do you know if he ever got the missing keys from SP? I was going to reach out to SP to see if I could get the 1 key I'm missing but I didn't want to cross streams so to speak.
Do you know if he ever got the missing keys from SP? I was going to reach out to SP to see if I could get the 1 key I'm missing but I didn't want to cross streams so to speak.
I don't think Bunny would be pissed if you speak directly with Melissa, in regards to getting the key(s) not received.
She is quite helpful and a delight to deal with but then again SP wouldn't exist without her, she is the front face of that company.
we cant request missing or damaged keys until we can do it all at once, we stil have 7 orders to get out who requested delayed shipping with other sets, so once they is complete, we can make the order with sp
I just started imagining people opening a box with Miami Twice, Hack'd, Hyper Fuse, JT and Retro all in one big box... lol your head would melt!
I just started imagining people opening a box with Miami Twice, Hack'd, Hyper Fuse, JT and Retro all in one big box... lol your head would melt!
YES they shall all suffer that rare condition known as CTRL/ALT chernobyl key-cap meltdown, your skull bursts forth as your brain heats up from all your expectations, then you simply disappear through the floorboards into the earth.
The massive heat melting several kilometers into the earth's core before running into some underground water supply to cool your descent into madness......... he he he 8) .
YES, there will always be the real aspect of receiving everything you could ever imagine and even more, when you buy from CTRL/ALT (should be a public health warning on every key-cap box).
we cant request missing or damaged keys until we can do it all at once, we stil have 7 orders to get out who requested delayed shipping with other sets, so once they is complete, we can make the order with sp
Makes sense. Thanks for the update!
Haha. I just started imagining people opening a box with Miami Twice, Hack'd, Hyper Fuse, JT and Retro all in one big box... lol your head would melt!
If anyone is tired of their set yet, I'm looking to nab one at retail price?
Gentle bump :)
Is there anyone else like me who ordered Hack'd and HyperFuse together? I got HF shipped to me but I'm still waiting on Hackd. I know Cody is on vacation and Bunny is super busy right now, so I just want to know if there are others still waiting? :confused:
Gentle bump :)
Is there anyone else like me who ordered Hack'd and HyperFuse together? I got HF shipped to me but I'm still waiting on Hackd. I know Cody is on vacation and Bunny is super busy right now, so I just want to know if there are others still waiting? :confused:
I did too and I am still waiting on both sets. My Hack'd ticket indicates they are waiting on more keys from Signature Plastics. I have no idea when that time frame will be/if an order was placed etc. I was going to wait until I receive my Hyperfuse set before pinging them again because I don't want to the communication overhead as they are pretty swamped based on what I read in other threads.
That being said, I'm right with you in being a little worried.
Gentle bump :)
Is there anyone else like me who ordered Hack'd and HyperFuse together? I got HF shipped to me but I'm still waiting on Hackd. I know Cody is on vacation and Bunny is super busy right now, so I just want to know if there are others still waiting? :confused:
I did too and I am still waiting on both sets. My Hack'd ticket indicates they are waiting on more keys from Signature Plastics. I have no idea when that time frame will be/if an order was placed etc. I was going to wait until I receive my Hyperfuse set before pinging them again because I don't want to the communication overhead as they are pretty swamped based on what I read in other threads.
That being said, I'm right with you in being a little worried.
Thanks for the update.
I talked with Bunny over PM's about my hackd ~6 weeks ago and he said the set is with him (in the UK) so I don't think they are waiting on more keys.
I'm sure there will be a response soon enough. Even if these 'bundled' orders have slipped through the net, we will get them at some point :) ... Unlike some other GB's I've been in :p
Gentle bump :)
Is there anyone else like me who ordered Hack'd and HyperFuse together? I got HF shipped to me but I'm still waiting on Hackd. I know Cody is on vacation and Bunny is super busy right now, so I just want to know if there are others still waiting? :confused:
I did too and I am still waiting on both sets. My Hack'd ticket indicates they are waiting on more keys from Signature Plastics. I have no idea when that time frame will be/if an order was placed etc. I was going to wait until I receive my Hyperfuse set before pinging them again because I don't want to the communication overhead as they are pretty swamped based on what I read in other threads.
That being said, I'm right with you in being a little worried.
Thanks for the update.
I talked with Bunny over PM's about my hackd ~6 weeks ago and he said the set is with him (in the UK) so I don't think they are waiting on more keys.
I'm sure there will be a response soon enough. Even if these 'bundled' orders have slipped through the net, we will get them at some point :) ... Unlike some other GB's I've been in :p
hey guys, bundled stuff not slipped through the netHey bunz,
just working through orders
i do have some sets here, so i had said shortly before i disappeared to have the baby that i would take care of a couple folks myself on this, that i still can, if i said that to you shoot me a pm and ill get it sorted asap
as for the last couple outstanding with hyperfuse, they will be sorted soon
as for anyone waiting on scoops etc, we are implementing a key request form in the site and itll be up soon for everyone so we can handle them all together
thanks
sorry for the lack of replies i had basically forgotten about the thread
hey guys, bundled stuff not slipped through the net
just working through orders
i do have some sets here, so i had said shortly before i disappeared to have the baby that i would take care of a couple folks myself on this, that i still can, if i said that to you shoot me a pm and ill get it sorted asap
as for the last couple outstanding with hyperfuse, they will be sorted soon
as for anyone waiting on scoops etc, we are implementing a key request form in the site and itll be up soon for everyone so we can handle them all together
thanks
sorry for the lack of replies i had basically forgotten about the thread
as for anyone waiting on scoops etc, we are implementing a key request form in the site and itll be up soon for everyone so we can handle them all together
thanks
sorry for the lack of replies i had basically forgotten about the thread
as for anyone waiting on scoops etc, we are implementing a key request form in the site and itll be up soon for everyone so we can handle them all together
thanks
sorry for the lack of replies i had basically forgotten about the thread
Any update on this Bunny?
as for anyone waiting on scoops etc, we are implementing a key request form in the site and itll be up soon for everyone so we can handle them all together
thanks
sorry for the lack of replies i had basically forgotten about the thread
Any update on this Bunny?
pm me anything you need and ill get that sorted for you right away
as for anyone waiting on scoops etc, we are implementing a key request form in the site and itll be up soon for everyone so we can handle them all together
thanks
sorry for the lack of replies i had basically forgotten about the thread
Any update on this Bunny?
pm me anything you need and ill get that sorted for you right away
I PM'd you recently Bunny, any response would be appreciated.
I'll have the new system ready for support ready in a week or two.
You'll able to attach an address and ill be able to attach a label instantly. It's awesome and i can't wait to wrap it up. Just wrapping up a few essentials features.
If your dying for scoops right now. Ping me with an address and subject saying "Hack'd scoops".
Sorry to be a downer and bump this again, but I saw others in the HyperFuse thread getting promises of their bundled sets (HyperFuse and Hack'd By Geeks) getting sent out. Any chance of an update on mine?
I understand the whole deal with evreyone being busy and not being a business but as far as I know the only thing stopping me from having my set is that it's never been put into the post.... :-\
Just for the info, I've had my two Hyperfuse sets for months and been told twice about my hack'd set "it'll be in the post within the week" :'(
I just got mine in. I checked the TKL kit real quick and everything seems in order. I've very happy to have received it.
For those wondering about Hack'd, it did not get included in this shipment. :(
For anyone in this boat, pm me your order number and I'll get it sorted once we have this last batch out and we can catch up on the awkward bits
I'll have the new system ready for support ready in a week or two.
You'll able to attach an address and ill be able to attach a label instantly. It's awesome and i can't wait to wrap it up. Just wrapping up a few essentials features.
If your dying for scoops right now. Ping me with an address and subject saying "Hack'd scoops".
I'll have the new system ready for support ready in a week or two.
You'll able to attach an address and ill be able to attach a label instantly. It's awesome and i can't wait to wrap it up. Just wrapping up a few essentials features.
If your dying for scoops right now. Ping me with an address and subject saying "Hack'd scoops".
Any update on the new system being up?
I sent a PM like you said we could, but never heard back or received anything.
I'm still missing a Hack'd set purchased back in March of 2015, any help please? I placed a support ticket quite a long time ago, with no updates.
Cheers
Bunny,
Any idea on replacement keys and a time line for them?
Bunny,
Any idea on replacement keys and a time line for them?
Bunny,
Any idea on replacement keys and a time line for them?
got your support request thanks
ill leave it up 2 weeks for people to submit and then ill get them ordered
Bunny,
Any idea on replacement keys and a time line for them?
got your support request thanks
ill leave it up 2 weeks for people to submit and then ill get them ordered
Bunny,
Any idea on replacement keys and a time line for them?
got your support request thanks
ill leave it up 2 weeks for people to submit and then ill get them ordered
Does everyone who's already sent in you info need to open another support request? I didn't get a notice or anything...
It would be helpful to us if you could so we can keep it all in one place
It would be helpful to us if you could so we can keep it all in one place
Bunny/Cody -
Do you know when shipping of Hack'd might continue? I'm waiting on my set.
Thanks.
Bunny/Cody -
Do you know when shipping of Hack'd might continue? I'm waiting on my set.
Thanks.
im working on the last couple now, need to unpack em from my move
went through a complete set for unisyptical and user 18 this week
just a couple more to sort
Bunny/Cody -
Do you know when shipping of Hack'd might continue? I'm waiting on my set.
Thanks.
im working on the last couple now, need to unpack em from my move
went through a complete set for unisyptical and user 18 this week
just a couple more to sort
I was under the impression that Hack'd was with Cody and already sorted since it was supposed to be shipped with my HF order. It doesn't seem like that would have ever been possible if the sets are still with you.
I know that this won't be looked upon fondly, but I'm really not happy that I have to wait even longer because my set was used to provide replacement keys. I didn't order it any later then anyone else, or any differently. The only mistake I made was combining the order. It really sucks. I feel like I'm getting the short end of the stick because I combined my order, when I was told that specifically wouldn't be the case.Bunny/Cody -
Do you know when shipping of Hack'd might continue? I'm waiting on my set.
Thanks.
im working on the last couple now, need to unpack em from my move
went through a complete set for unisyptical and user 18 this week
just a couple more to sort
I was under the impression that Hack'd was with Cody and already sorted since it was supposed to be shipped with my HF order. It doesn't seem like that would have ever been possible if the sets are still with you.
cody was short a handful of sets after doing some replacements etc, i however still had some on hand, but as the buy was before i moved, they were still packed away, as we have just got around to the end of hyper, the issue has just come up so ive been sorting it this week
I know that this won't be looked upon fondly, but I'm really not happy that I have to wait even longer because my set was used to provide replacement keys. I didn't order it any later then anyone else, or any differently. The only mistake I made was combining the order. It really sucks. I feel like I'm getting the short end of the stick because I combined my order, when I was told that specifically wouldn't be the case.Bunny/Cody -
Do you know when shipping of Hack'd might continue? I'm waiting on my set.
Thanks.
im working on the last couple now, need to unpack em from my move
went through a complete set for unisyptical and user 18 this week
just a couple more to sort
I was under the impression that Hack'd was with Cody and already sorted since it was supposed to be shipped with my HF order. It doesn't seem like that would have ever been possible if the sets are still with you.
cody was short a handful of sets after doing some replacements etc, i however still had some on hand, but as the buy was before i moved, they were still packed away, as we have just got around to the end of hyper, the issue has just come up so ive been sorting it this week
That is fine with me, you can refund it. I honestly don't think I'll get it anyway. My order number is #195424.I know that this won't be looked upon fondly, but I'm really not happy that I have to wait even longer because my set was used to provide replacement keys. I didn't order it any later then anyone else, or any differently. The only mistake I made was combining the order. It really sucks. I feel like I'm getting the short end of the stick because I combined my order, when I was told that specifically wouldn't be the case.Bunny/Cody -
Do you know when shipping of Hack'd might continue? I'm waiting on my set.
Thanks.
im working on the last couple now, need to unpack em from my move
went through a complete set for unisyptical and user 18 this week
just a couple more to sort
I was under the impression that Hack'd was with Cody and already sorted since it was supposed to be shipped with my HF order. It doesn't seem like that would have ever been possible if the sets are still with you.
cody was short a handful of sets after doing some replacements etc, i however still had some on hand, but as the buy was before i moved, they were still packed away, as we have just got around to the end of hyper, the issue has just come up so ive been sorting it this week
i never said it was about replacing missing keys, sets go missing or lost in transit, we order extras to account for these kid of eventualities, which i pay for
we only just found out cody is short a few, so ive been sorting it out
if you are not happy about that im happy to refund your set and save myself the time of going through and checking it and shipping it, and paying the additional international shipping charge
That is fine with me, you can refund it. I honestly don't think I'll get it anyway. My order number is #195424.I know that this won't be looked upon fondly, but I'm really not happy that I have to wait even longer because my set was used to provide replacement keys. I didn't order it any later then anyone else, or any differently. The only mistake I made was combining the order. It really sucks. I feel like I'm getting the short end of the stick because I combined my order, when I was told that specifically wouldn't be the case.Bunny/Cody -
Do you know when shipping of Hack'd might continue? I'm waiting on my set.
Thanks.
im working on the last couple now, need to unpack em from my move
went through a complete set for unisyptical and user 18 this week
just a couple more to sort
I was under the impression that Hack'd was with Cody and already sorted since it was supposed to be shipped with my HF order. It doesn't seem like that would have ever been possible if the sets are still with you.
cody was short a handful of sets after doing some replacements etc, i however still had some on hand, but as the buy was before i moved, they were still packed away, as we have just got around to the end of hyper, the issue has just come up so ive been sorting it this week
i never said it was about replacing missing keys, sets go missing or lost in transit, we order extras to account for these kid of eventualities, which i pay for
we only just found out cody is short a few, so ive been sorting it out
if you are not happy about that im happy to refund your set and save myself the time of going through and checking it and shipping it, and paying the additional international shipping charge
Hey Bunny, I know we chatted about this last week, did you have a chance to get my set sent out, or not yet?I know bunny is sending a metric ton out of monday/Tuesday this week, so if it's not already gone I'd bet it's going out then.
Hey Bunny, I know we chatted about this last week, did you have a chance to get my set sent out, or not yet?
Hey Bunny, I know we chatted about this last week, did you have a chance to get my set sent out, or not yet?
going out tuesday as are the last of everyone elses, i have my sons men2 test tomorrow so i dont think ill have time in the afternoon
if you message me on slack tuesday night ill have tracking for you
going out tuesday as are the last of everyone elses
Still no scoops in my mailbox.
going out tuesday as are the last of everyone elses
Does that mean all the sets were sent out? I definitely haven't received my order in the mail. Are combined shipments still on hold?
Still no scoops in my mailbox.
Have you filled out a support requestgoing out tuesday as are the last of everyone elses
Does that mean all the sets were sent out? I definitely haven't received my order in the mail. Are combined shipments still on hold?
Sending you a pm now to get that sorted for you
Still no scoops in my mailbox.
Have you filled out a support requestgoing out tuesday as are the last of everyone elses
Does that mean all the sets were sent out? I definitely haven't received my order in the mail. Are combined shipments still on hold?
Sending you a pm now to get that sorted for you
I'm still waiting on mine too, which I had combined with Hyperfuse GMK.
Still no scoops in my mailbox.
Have you filled out a support request
Still no scoops in my mailbox.
Have you filled out a support request
Yes, every time you've asked for information I've sent it again. I filed a ticket in the new system, PM'd Cody in the past. Not sure why I am falling through the cracks.
I own Hack'd and didn't know scooped were even an option xD
Still waiting for my set, already have shift/scoops. I sent you a follow up PM Bunny.
Still waiting for my set, already have shift/scoops. I sent you a follow up PM Bunny.
The usual response is to ask whether you have created a support ticket yet.
Apparently that's the best way of getting hold of the [CTRL]ALT team these days :)
Still waiting for my set, already have shift/scoops. I sent you a follow up PM Bunny.
The usual response is to ask whether you have created a support ticket yet.
Apparently that's the best way of getting hold of the [CTRL]ALT team these days :)
I've had the support ticket open since 5/17/15...
Still waiting for my set, already have shift/scoops. I sent you a follow up PM Bunny.
The usual response is to ask whether you have created a support ticket yet.
Apparently that's the best way of getting hold of the [CTRL]ALT team these days :)
I've had the support ticket open since 5/17/15...
Ah, but is that in the new support system?
Still waiting for my set, already have shift/scoops. I sent you a follow up PM Bunny.
The usual response is to ask whether you have created a support ticket yet.
Apparently that's the best way of getting hold of the [CTRL]ALT team these days :)
I've had the support ticket open since 5/17/15...
Ah, but is that in the new support system?
Hmn, looks like I made one on the new support system as well. What does "On Hold" status mean?
Still waiting for my set, already have shift/scoops. I sent you a follow up PM Bunny.
The usual response is to ask whether you have created a support ticket yet.
Apparently that's the best way of getting hold of the [CTRL]ALT team these days :)
I've had the support ticket open since 5/17/15...
Ah, but is that in the new support system?
Hmn, looks like I made one on the new support system as well. What does "On Hold" status mean?
Still waiting for my set, already have shift/scoops. I sent you a follow up PM Bunny.
The usual response is to ask whether you have created a support ticket yet.
Apparently that's the best way of getting hold of the [CTRL]ALT team these days :)
I've had the support ticket open since 5/17/15...
Ah, but is that in the new support system?
Hmn, looks like I made one on the new support system as well. What does "On Hold" status mean?
hey man sorry i have yoru info and got your pm
it was on hold just why i got my **** together and got it out
ill be working on the end of my support stuff throughout this week
If anyone else is in my situation (Hyperfuse + Hack'd combined order), I received Hyperfuse but not Hack'd today. Support ticket is in, but just an fyi.Yep there are a few of us, so hold tight! I got my HyperFuse in September, still waiting on word from the ctrl alt crew on what the situation is for Hack'd.
If anyone else is in my situation (Hyperfuse + Hack'd combined order), I received Hyperfuse but not Hack'd today. Support ticket is in, but just an fyi.Yep there are a few of us, so hold tight! I got my HyperFuse in September, still waiting on word from the ctrl alt crew on what the situation is for Hack'd.
If you are wanting to get rid of your set, id gladly buy itIf anyone else is in my situation (Hyperfuse + Hack'd combined order), I received Hyperfuse but not Hack'd today. Support ticket is in, but just an fyi.Yep there are a few of us, so hold tight! I got my HyperFuse in September, still waiting on word from the ctrl alt crew on what the situation is for Hack'd.
Yeah, unfortunately I ended up selling the board I was going to use the set on so I'm kinda hoping for a refund at this point. Either way, I've waited over a year so a few months give or take doesn't really matter a ton to me anymore.
Any update on the sets that still haven't been shipped out? I created a support ticket but received no response. Has everything else been abandoned until Hyperfuse finishes..
:'(
Whats your ticket number? I thought all were responded too
Any update on the sets that still haven't been shipped out? I created a support ticket but received no response. Has everything else been abandoned until Hyperfuse finishes..
:'(
Whats your ticket number? I thought all were responded too
The current plan, as I've been told is everything is in hand except for Hack'd, as soon as Cody gets ahold of the sets he's been told to dig out the Hack'd sets and make sure theyre all there and get them out so we can wrap up another buy.
Any updates?
Any updates?
In case you haven't received a response, I was reading through my own ticket history, and so far something about a house flood and potentially lost sets (read: refund). But also another statement a month later that it may be with Bro who should be shipping it out. Apart from that, I have yet to receive my set and I'm currently waiting to be approved to join the Slack so that I can actually maybe talk to someone in real time instead of getting monthly updates!
Thanks.
Today on Slack Brocaps said he does not have the caps, and that they are still with Cody :( I never got any kind of confirmation on how many Hackd sets were in this giant package. Hopefully enough for all of us to get a set.
and that they are still with CodyCody has sent them. That's what has been said all along, what brocaps said sounded like they still haven't arrived. I'm not sure what kind of shipping method takes a month though.
Thanks.
Today on Slack Brocaps said he does not have the caps, and that they are still with Cody :( I never got any kind of confirmation on how many Hackd sets were in this giant package. Hopefully enough for all of us to get a set.
Yikes! Thanks for the concrete update. So strange that Tym would say "Keys should land with Bro next couple of days, there were shipped last week" in my ticket about a month back. Seeing as how that contradicts Brocaps, it's kinda sad to see that there's just as much misinformation internally as there is externally.
Thanks.
Today on Slack Brocaps said he does not have the caps, and that they are still with Cody :( I never got any kind of confirmation on how many Hackd sets were in this giant package. Hopefully enough for all of us to get a set.
Yikes! Thanks for the concrete update. So strange that Tym would say "Keys should land with Bro next couple of days, there were shipped last week" in my ticket about a month back. Seeing as how that contradicts Brocaps, it's kinda sad to see that there's just as much misinformation internally as there is externally.
basically when tym said that, we were under the impression it had shipped, cody picked up the caps, got em all boxed up, purchased a label and sent us tracking, so at that time we gave tym the info they were en route, so he could update support tickets
the tracking didnt move for a while and i didnt chase for while because we had tracking and i assumed it was being dropped off
once me and cody caught up about it, it transpired he needed to change the label and amount of packages that were to be shipped (its a lot of stuff with the remnants and extras across several buys)
at this time cody then had a family trip, and bro had a short one almost concurrently with each other
they both got home early this week and i spoke to cody on either monday or tuesday, and he told me he would set a reminder for the next day to get it taken care of, im yet to catch up with cody in the last couple of days but wednesday through saturday he looks after his kid so its not abnormal for that to happen
what i do know for a fact is everything has been picked up from n3rdly, packaged up with cody, and just needs to be dropped off (that last part being slightly harder than it seems due to physical size)
once i have further news i will update again for the few people still requiring a resolution
Thanks.
Today on Slack Brocaps said he does not have the caps, and that they are still with Cody :( I never got any kind of confirmation on how many Hackd sets were in this giant package. Hopefully enough for all of us to get a set.
Yikes! Thanks for the concrete update. So strange that Tym would say "Keys should land with Bro next couple of days, there were shipped last week" in my ticket about a month back. Seeing as how that contradicts Brocaps, it's kinda sad to see that there's just as much misinformation internally as there is externally.
basically when tym said that, we were under the impression it had shipped, cody picked up the caps, got em all boxed up, purchased a label and sent us tracking, so at that time we gave tym the info they were en route, so he could update support tickets
the tracking didnt move for a while and i didnt chase for while because we had tracking and i assumed it was being dropped off
once me and cody caught up about it, it transpired he needed to change the label and amount of packages that were to be shipped (its a lot of stuff with the remnants and extras across several buys)
at this time cody then had a family trip, and bro had a short one almost concurrently with each other
they both got home early this week and i spoke to cody on either monday or tuesday, and he told me he would set a reminder for the next day to get it taken care of, im yet to catch up with cody in the last couple of days but wednesday through saturday he looks after his kid so its not abnormal for that to happen
what i do know for a fact is everything has been picked up from n3rdly, packaged up with cody, and just needs to be dropped off (that last part being slightly harder than it seems due to physical size)
once i have further news i will update again for the few people still requiring a resolution
Thanks bunny :thumb:
Bump lmao
Bump lmao
Are you waiting on a full set too?