geekhack
geekhack Marketplace => Group Buys and Preorders => Topic started by: hineybush on Wed, 17 June 2020, 22:07:24
-
welcome to the first public round of the tkl one.
TKL ONE ENTRY FORM https://form.jotform.com/201558305114042
NUM ONE ENTRY FORM https://form.jotform.com/201695631822153
Here is the interest check thread: https://geekhack.org/index.php?topic=104750.0
The group buy spots will be based on a raffle. There will be two 10-minute-long time periods for entry. These time periods will be spaced 10 hours apart to ensure that people from all over the world may enter. Please only enter during one of the time slots, as all entries will be lumped together for the raffle process.
Date: June 21, 2020
Entry Period 1: 10:00 AM-10:10 AM EDT - Check your local time here: https://everytimezone.com/s/4bfaeeae
Entry Period 2: 8:00 PM-8:10 PM EDT - Check your local time here: https://everytimezone.com/s/ac5b9afb
Expected ship date: 4-6 months upon payment period completion. Perhaps sooner due to the lower volume.
Entries
This raffle will be limited to one entry per household. If you enter multiple times I reserve the right to disqualify you from this buy, as well as all future hiney product runs. Any attempt to circumvent this rule will result in the same thing, and I will be really annoyed so please just don't. Entries will be gathered by Jotform. It will collect all relevant info. If you are worried about using a proxy, I will cross reference IP+email+address+etc to try and verify each individual.
It is highly recommended to enter with your actual address, not a proxy address. The entry form has nothing to do with shipping (see the shipping section below), so it will make it easier for everyone to use your correct address.
Communication
Please use an email address that you use regularly for communication, as I will be sending winner notifications and Shopify invoices as well as updates and news to it.
Number of Slots
There are 45 slots to be raffled off. What you enter in the form should reflect what you desire in the end. Once winners are notified and invoices are sent out, I will allow a 24-hour grace period to adjust/change/drop out. All communications to change your order must be made via email at contact@hineybush.com .
Editing your order and Payment
I will allow 72 hours for payment completion (if you need more time please email me at contact@hineybush.com and we can work it out). If you don't email me to work it out and haven't paid within 72 hours of getting your invoice, the invoice will be cancelled and the next person on the winners' list will get your spot instead.
Shipping
Shipping invoices will be calculated and sent at the time of shipment and no shipping costs will be included in the initial invoice. Please make sure you include a regularly-used email address in your entry form, as said above. All domestic, US-based addresses will be shipped via USPS Priority Mail. All international orders will be shipped via DHL Express. The customer will be responsible for all shipping costs, including import fees.
Colors/Layouts
The color options will be gold and black. I will offer both WKL and winkey top variants.
Pricing
$505 USD for one (1) case + one (1) PCB. You will be required to choose one plate (options below) and will have an option to purchase one additional plate. There will also be an opportunity to order extra h87c-hsp PCBs. I will have the extra plates/PCBs up after the buy ships.
Suggested flip price $550 USD
Plate options
- FR4 Full - matte black (+$25)
- FR4 Half - matte black (+$25)
- Brass Full - clear coated (+$35)
- Aluminum Full - black anodized (+$35)
- Polycarbonate Full - clear coated (+$35)
- FR4 - Full - Alps - WKL/Tsangan - matte black (+$25)
Extra PCBs will be $48 USD each.
num one info
There is an option to also add a num one (offered in the same colors as tkl one) to your order. If you say you want one you will be led to that form within the tkl one form, if not you will skip that section. I will also post a separate GB form for those interested in only the num one. Keep in mind that the num one will only be offered in gold and black, just like the tkl one.
num one pricing
$175 (case + 1 PCB + 1 plate). Plate options are FR4 and Aluminum. Extra plates are $20 and extra PCBs are $25.
There will be a maximum of 60 num one slots given, including those who win the opportunity to buy them via raffle - so basically, if there are X tkl one winners who want a num one, 60-X slots will be available from the dedicated num one raffle.
Payment Specific to PayPal
Please note that my storefront does not accept PayPal due to their very annoying refund policy as well as their anti-group buy stance on funds release. If you secure a spot and MUST use PayPal, please contact me via email (contact@hineybush.com) and we will work it out. I would much prefer that you can find an alternative means of payment that doesn't involve PayPal.
Some pics
(https://live.staticflickr.com/65535/50010384511_29a631a973_k.jpg)
(https://live.staticflickr.com/65535/50009851458_1dfb14525c_k.jpg)
(https://live.staticflickr.com/65535/50010644907_152026bb9d_k.jpg)
(https://live.staticflickr.com/65535/50009851998_82a0065dfb_k.jpg)
(https://live.staticflickr.com/65535/49923350911_d86ae4a3d0_k.jpg)
(https://live.staticflickr.com/65535/49923350731_e7a1f5e16f_k.jpg)
(https://live.staticflickr.com/65535/49842338987_38eacc4680_k.jpg)
(https://live.staticflickr.com/65535/49960282607_cf5f45332a_k.jpg)
the lilac will be in a future public round.. maybe for another keyboard first...
(https://live.staticflickr.com/65535/49563497048_86da7b82c2_k.jpg)
Note: the final gold color may vary slightly compared to my prototype. This is the end goal however it will be within 95% accuracy to this.
Here is the VOD to one of my proto builds. I do a bit of a sound comparison at the end featuring the brass-plate version (MX Blacks) and FR4 (Gat Inks) as well as other builds I have:
Other design considerations
-6 degree angle
-a.87 layout - h87a reference
-brass interior weight, stainless exterior
-USB Type C port
-burger mount optional ofc
-jane v2/koala/whale plate mount locations - these plates can be used
-Torx screws will be used - for the case/plate screws a T6 driver/bit is required. I recommend Wiha (1 (https://www.kctoolco.com/wiha-26706-t6-x-40mm-precision-torx-screwdriver/), 2 (https://www.kctoolco.com/wiha-36266-t6-x-60mm-torx-softfinish-driver/)), Wera (1 (https://www.kctoolco.com/wera-028001-t6-x-60mm-kraftform-plus-torx-screwdriver/)) or Felo (1 (https://www.kctoolco.com/felo-17046-t6-x-60mm-torx-screwdriver/)) drivers. The hardware is 18-8 stainless steel. Use cheap or crappy off brand torx drivers at your own risk. If you can afford a $500 keyboard, you can afford a $6 screwdriver. Also the weigh screws need a T10 drive end.
-I will be doing the non-ribbed-for-pleasure interior, as I don't believe there is a difference to warrant the increased cost of production.
Please keep up with the buy here, as well as on my other social medias:
discord.hiney.cc (http://discord.hiney.cc)
ig.hiney.cc (http://ig.hiney.cc)
thanks.
-
Updates
June 22, 2020 - All winners invoiced, all losers notified. Some notification emails haven't gone through it seems. If anyone wants to know for sure, shoot me your email in a PM, via email or via discord and I can verify for you.
-
Crossing fingers.
-
**Bows to the RNG gods**
-
pray to the gods.
-
glwgb! and good luck to all of those entering :thumb:
I will be waiting patiently for that sweet sweet lilac in a future round.
-
All up on this Hiney
-
glwgb! and good luck to all of those entering :thumb:
I will be waiting patiently for that sweet sweet lilac in a future round.
The next round (hopefully in 3-4 months, around when this one ships?) will include lilac for sure. I'm not sure about the other color yet, I may put that to a vote.
-
What a beautiful tkl+numpad combo
-
litty titty
-
Let's go! GLWB and good luck everyone.
-
Wtb
-
GL all! That lilac is gorgeous!
-
o yes
-
saving monies for a stab at the next round, gl all
-
let's gooo
-
nice work hiney, but what does this mean:
brass interior weight, stainless exterior
-
nice work hiney, but what does this mean:
brass interior weight, stainless exterior
check out the vod -- the weight is two pieces
-
i SUPPOSE!!
-
damn.
-
glwgb!!! first page gang!!!!
-
Oo gl everyone :]
-
Beautiful board, let’s go for gold
Sent from my iPhone using Tapatalk
-
In for gold
-
Good luck everyone!
I am feeling the gold as well.
-
PogU
-
light gold 2020
-
Outstanding!
Hiney - what is your personal preference for plate(s) with this board?
-
Might need my dad to enter this instead of me to get the Father's Day good luck bonus
-
Outstanding!
Hiney - what is your personal preference for plate(s) with this board?
i am FR4 gang
however brass is lovely (typing on it now). I haven't done alu or pc, but those are both obviously good as well.
-
Outstanding!
Hiney - what is your personal preference for plate(s) with this board?
i am FR4 gang
however brass is lovely (typing on it now). I haven't done alu or pc, but those are both obviously good as well.
Full or half plate fr4 for you?
-
Outstanding!
Hiney - what is your personal preference for plate(s) with this board?
i am FR4 gang
however brass is lovely (typing on it now). I haven't done alu or pc, but those are both obviously good as well.
Full or half plate fr4 for you?
sorta prefer full, however half is its' own experience with the reverb
-
All the plates will be ansi only? no iso option?
-
I am ready for the gold.
-
I really really want this
-
yum
Sent from my SM-G965U using Tapatalk
-
that champagne is hot
-
GL ALL :thumb:
-
Lol, I love the “Suggested Flip Price”.
Glws Hiney!
-
"not for resale" pog
Looking forward to the raffle in a couple days. Thanks for this project hiney!
-
Hey Hiney - will you also release plate files for the Num One after initial group buy?
-
Hey Hiney - will you also release plate files for the Num One after initial group buy?
yeah sure I can!
-
Nice!
-
Lol, I love the “Suggested Flip Price”.
Glws Hiney!
Bwahaha, I just saw that!
-
Is there an ISO plate option with it?
-
I love Hineybush and Hineybush keyboards.
-
Is there an ISO plate option with it?
universal plate ya. renders were with the ansi only one i protoed with.
-
Hey Hiney - will you also release plate files for the Num One after initial group buy?
yeah sure I can!
That's awesome, thanks!
-
Is there an ISO plate option with it?
universal plate ya. renders were with the ansi only one i protoed with.
Thanks! we love you! :D
-
My body is ready
Sent from my iPhone using Tapatalk
-
Is there going to be a form posted somewhere?
-
I imagine it will be updated on his website:
https://hineybush.com/blogs/news/hiney-tkl-one-group-buy-info
-
I imagine it will be updated on his website:
https://hineybush.com/blogs/news/hiney-tkl-one-group-buy-info
Is there going to be a form posted somewhere?
TKL ONE ENTRY FORM https://form.jotform.com/201558305114042
NUM ONE ENTRY FORM https://form.jotform.com/201695631822153
-
Hiney's inbox is blowing up right now
-
In for a Gold tkl and numpad! Woot!
-
aw man wrote username as coolhwip in the form instead of adamjohari. confused my discord and geekhack account. :blank:
-
Just entered, but only had the option for black and gold for the color? Maybe I'm missing something.
-
I counted near 50 people viewing this thread concurrently when it was posted, GL everyone! I imagine the later raffle will have a lot more folk!
-
Just entered, but only had the option for black and gold for the color? Maybe I'm missing something.
that's right, see opening thread + tail end of IC.
-
There were some issues with the form,
I went to submit the first time at 7 minutes after the hour and got a "Form is current unavailable" message, then tried again at :09 and got "Form Disabled".
-
Just entered, but only had the option for black and gold for the color? Maybe I'm missing something.
that's right, see opening thread + tail end of IC.
Ah I didn't see that, thank you. Was looking forward to that unlikely polycarb variant.
-
Just entered, but only had the option for black and gold for the color? Maybe I'm missing something.
Colors/Layouts
The color options will be gold and black. I will offer both WKL and winkey top variants.
hehe
-
There were some issues with the form,
I went to submit the first time at 7 minutes after the hour and got a "Form is current unavailable" message, then tried again at :09 and got "Form Disabled".
the form disabled for some reason about 7 minutes in yeah. I closed it at 10:10:00 based on my time here: http://time-time.net/timer/digital-clock.php
please feel free to join during the later session if you missed out on the early one.
-
aw man wrote username as coolhwip in the form instead of adamjohari. confused my discord and geekhack account. :blank:
no probs there, you'll be alright!
-
May we know the amount of participants? :p
-
Glad i got my entry in! Fingers crossed, GL everyone! Love this setup so much :thumb:
-
good luck hiney
-
Good luck to everyone that entered and well done hineybush on a great TKL & Numpad combination. I hope the whole thing goes well.
-
May we know the amount of participants? :p
478 submissions in the first round.
-
May we know the amount of participants? :p
478 submissions in the first round.
This is potentially the Keyboard of the year, GL to all!
-
I have no idea what an area code is, so I just put "00" in there. GL all.
-
Good luck everyone!
-
gl all
-
hope I win
-
Best of luck lads and lasses.
Sent from my iPhone using Tapatalk
-
Thanks for entering, everyone.
867 entries at the end of the day, after finding a few duplicates and bogus entries.
-
Thanks for entering, everyone.
867 entries at the end of the day, after finding a few duplicates and bogus entries.
Congrats on the entry numbers. Can't wait to see the Vickrey.
-
Good luck all!
-
45/867 = 5% chance. congrats to the winners!
-
Congrats on the raffle Hiney!
Even more exclusive than a Keycult.
-
45/867 = 5% chance. congrats to the winners!
WELL ACTUALLY
(https://i.ibb.co/1b4VxRn/well-actually.png) (https://imgbb.com/)
-
5% is about 95% off from me having even the slightest chance
Sent from my SM-G970F using Tapatalk
-
Anyone know when all the emails are going out? (if im asking this i probably already lost lol)
-
Join discord for up to date information
Sent from my SM-G970F using Tapatalk
-
I struck out! Congrats to the winners.
Best of luck with the group buy hiney and hopefully there is an opportunity in the future to grab it again!
-
Congrats to the winners! I’ll try again for the lilac in the next round.
-
Paid and already eager for it! I really hoped the lilac color was available, but i am just as happy with the gold!
-
Paid and already eager for it! I really hoped the lilac color was available, but i am just as happy with the gold!
i'm sure ppl will be willing to trade!
-
Hi all. Thanks for the interest and entries. All winners have been notified/invoiced. All losers have been notified. If you haven't gotten an email but entered, chances are that 1. you lost and 2. the mail service I used for the notifications didn't get to you. if you do want to be 100% sure please PM me here or on discord (@hineybush#0069) and I can verify it for you.
Once I have the funds avail I'll place the order with the factory and get this ball rolling.
I plan to vickrey at least some of the extras, so wait for that!
Thanks.
-
daddy hiney's gotta keep those IPAs rolling somehow
-
all orders finalized, everyone's paid, the first 50% has been submitted to the factory. the PCBs have been ordered. I need to order the numone ones next, should be doing that early/mid next week.
-
This looks like an amazing WKL + Num pad duo, anyway any of us can be notified of the next round when all this happens through GB/raffle again?
-
This looks like an amazing WKL + Num pad duo, anyway any of us can be notified of the next round when all this happens through GB/raffle again?
I will announce here, on my Discord (linked in the first post here) and likely on my IG as well.
-
This looks like an amazing WKL + Num pad duo, anyway any of us can be notified of the next round when all this happens through GB/raffle again?
I will announce here, on my Discord (linked in the first post here) and likely on my IG as well.
;D
-
Hey everyone - Just realized I've not updated this in a while.
I currently have on hand:
PCBs (both h87c and h10c)
Hardware
Bumpons
Hiney Rags
Currently waiting on:
Cases (in machining/soon to start finishing)
Custom bag sample
-
I ran a private FNF buy of two other colors about a month before the public buy opened, and those are en route to me now. I expect the public cases to be about a month away.
-
will there be r2 hiney? :D
-
will there be r2 hiney? :D
Seconded!
Also -- any extra numpad anticipated?
-
yes and yes
tkl one hse (f13) will come before the standard tkl r2 though.
-
received shipping from the factory for the public units.
I will receive them next week and will QC/organize everything for probably 2-3 weeks at least. I won't ship anything until the new year.
to the winners; keep your eyes out for your shipping invoices. I will likely start to ship them in 2-3 weeks as well. when the invoices are sent, I will include an option for you to reply to add on PCBs, plates, etc. as well as change your address. I will include this in the email that is sent alongside the invoices.
-
Following for extras, boards look sweet so far.
-
Following for extras, boards look sweet so far.
You should join Hiney's discord for updates so you don't miss extras.