geekhack

geekhack Marketplace => Interest Checks => Topic started by: dr_derivative on Tue, 08 June 2021, 10:17:09

Title: [IC] KAT Oblique [on hold]
Post by: dr_derivative on Tue, 08 June 2021, 10:17:09
(https://i.imgur.com/8m8ptLg.png)

KAT Oblique is the long awaited successor to XDA Oblique, which ran successfully in 2018.

Oblique is a keyset inspired by the keycaps of the AEK, AEKII, M0116/8, and many other similar Apple keyboards from the late 80s, 90s and early 00s. The unique font and matching icons have been carefully replicated to match the originals as closely as possible. That means they have been completely reworked since the original run.

(https://i.imgur.com/t27WJmm.png)
Pneuma by Stef Wolters

More renders

More

(https://i.imgur.com/vHReBsk.png)
Pneuma by Stef Wolters

(https://i.imgur.com/7jMdWlV.png)
TMOv2 by Funderburker

(https://i.imgur.com/rM0BxlL.png)
TMOv2 by Funderburker

(https://i.imgur.com/5d7XRpY.png)
Modern M0110 by Janglad and Heroyjenkins

(https://i.imgur.com/uhRm3An.png)
Modern M0110 by Janglad and Heroyjenkins

(https://i.imgur.com/AurtNxZ.jpg)
Onyx by Funderburker and Ryan

(https://i.imgur.com/59rO9dB.png)
Onyx by Funderburker and Ryan

(https://i.imgur.com/3uXLErW.png)
EquinoxBT by Ryan, Janglad, and Engicoder

(https://i.imgur.com/DqFCaUP.png)
EquinoxBT by Ryan, Janglad, and Engicoder

(https://i.imgur.com/rXEyP3W.png)
Dharma by Qoda Studio

(https://i.imgur.com/MF2JLBE.png)
Dharma by Qoda Studio

Note: While we've tried to make these renders as accurate as possible, final colours may vary slightly. The colours used for this set are shown below. Samples have already been requested and photos will be added before the group buy starts.

Kits

More
(https://i.imgur.com/8g5Aya3.png)
(https://i.imgur.com/0Zh123N.png)
(https://i.imgur.com/2PrNdlv.png)
(https://i.imgur.com/bYQ41T8.png)
(https://i.imgur.com/B4Wfj37.png)
(https://i.imgur.com/OklK3DY.png)
(https://i.imgur.com/V4N1PkR.png)
(https://i.imgur.com/Iv4rXAQ.png)
(https://i.imgur.com/V7ck8Ic.png)
(https://i.imgur.com/lz6Unvw.png)
(https://i.imgur.com/VA8NssC.png)
(https://i.imgur.com/WqHQcg4.png)
(https://i.imgur.com/QDcRmce.png)

Colours

(https://i.imgur.com/UZrxszN.png)
Colours have been tweaked slightly when compared to XDA Oblique. The biggest changes are the green and the red which should be a little more saturated, and the blue should be a little lighter.

Sample photos

Soon™

Collaborations

To be announced

Vendors

To be announced

FAQ

No weeb sublegends like XDA Oblique?

I had to sacrifice some combinations to include everything I wanted while keeping the number of kits reasonable for this set. Katakana sublegends were by far the worst selling of the alpha and modifier options available in XDA Oblique. Perhaps they will return in future, but not in this round.

Why no child kits for the Inverse colour scheme?

Unfortunately due to their backlog, Keyreative isn't accepting any sets with lots of reverse dye-sub work because of all the extra manufacturing time and QC involved. As a result we've had to limit the inverse colour scheme to just one base kit.

Any chance of Alps support?

People have been asking me about this since before XDA Oblique first ran. In my opinion it doesn't make sense to run Oblique with Alps support. Original AEKII keycaps are relatively common and unlike most Alps stuff can be found for a pretty reasonable price. I might run an Alps project in future, but not Oblique.

But what about TA Origins?

Samples are taking their sweet time to arrive, so I've chosen to prioritise this project for the moment. I still hope to follow through with that set in future.

Feedback

To give your feedback on the proposed set and kit designs fill out the IC survey form, or for anything that isn't covered leave a reply or feel free to DM me.

IC Form (https://forms.gle/pRtiL7CkCtYq8SuJ7)

Discord

If you want to discuss this set you can join the OC Lab Discord server. To receive notifications about project updates you can request the oblique role. All updates will of course be posted in this geekhack thread too.

OC Lab Discord server (https://discord.gg/NaxwtAa)

Special thanks

Banner

To show your support for this set add the following BBCode to your geekhack signature.

Code: [Select]
[url=https://geekhack.org/index.php?topic=113256.0][img]http://i.imgur.com/8m8ptLg.png[/img][/url]
Title: Re: [IC] KAT Oblique
Post by: dr_derivative on Tue, 08 June 2021, 10:18:05
Reserved for updates
Title: Re: [IC] KAT Oblique
Post by: Bl4ck on Tue, 08 June 2021, 10:26:45
Lookin good, inverse kit looks like a really good addition!

Would love to see ISO-PT on int kit.
Title: Re: [IC] KAT Oblique
Post by: blaqbern on Tue, 08 June 2021, 10:34:42
Inverse kit looking good. Hooray for 1.5U super/cmd in the base kit! An Inverse bars kit would be a nice addition, and no reverse dye-sub on those.
Title: Re: [IC] KAT Oblique
Post by: Koniotaur on Tue, 08 June 2021, 10:42:21
Good luck, although I'm out of any KAT until they normalize their qc standards.
Title: Re: [IC] KAT Oblique
Post by: Oggi on Tue, 08 June 2021, 11:42:02
ill
Title: Re: [IC] KAT Oblique
Post by: MIGHTY CHICKEN on Tue, 08 June 2021, 11:56:42
Apple fan, will for sure follow this,
GLWIC
Title: Re: [IC] KAT Oblique
Post by: Neely_12 on Tue, 08 June 2021, 12:03:38
Cool
Title: Re: [IC] KAT Oblique
Post by: lecorsair on Tue, 08 June 2021, 12:33:14
Yes! very much please. Been waiting for an Apple-esque set in KAT profile.

BTW, anyone has insight as to what's the production time for KAT these days?
Title: Re: [IC] KAT Oblique
Post by: TheBlackHammer on Tue, 08 June 2021, 12:38:15
love this set. always a huge fan of retro apple inspired stuff
Title: Re: [IC] KAT Oblique
Post by: linuxleah on Tue, 08 June 2021, 12:53:19
WANT!
Title: Re: [IC] KAT Oblique
Post by: mvkb on Tue, 08 June 2021, 13:13:30
Would love to see a render with the inverse base kit and accent mods. GLWIC!
Title: Re: [IC] KAT Oblique
Post by: dr_derivative on Tue, 08 June 2021, 13:25:00
Yes! very much please. Been waiting for an Apple-esque set in KAT profile.

BTW, anyone has insight as to what's the production time for KAT these days?

I think it varies a bit from set to set, but I believe it should be around 8-10 months. We've already requested samples and hope to have them approved before the GB, as this has been a big delay for other KAT sets.
Title: Re: [IC] KAT Oblique
Post by: yuutsu on Tue, 08 June 2021, 13:40:59
AEK LEGENDS LETS ****ING GOOOOOOOOO
Title: Re: [IC] KAT Oblique
Post by: azzipa on Tue, 08 June 2021, 14:14:58
Good luck, although I'm out of any KAT until they normalize their qc standards.

the bleed on milkshake looks bad. there's also the lack of communications with macsurfy for KAT refined (https://geekhack.org/index.php?topic=108835.0). he's heard nothing for months and set appears to be stalled. i'm not at all optimistic. doc, i'm a fan of your work. i'm just not convinced KAT is the optimal choice atm. if anyone has different information i would love to hear it.
Title: Re: [IC] KAT Oblique
Post by: Bl4ck on Tue, 08 June 2021, 15:01:11
People need to give KAT a chance and time for them to comeback. Otherwise they never will but yes, KAT has had its problems.
Title: Re: [IC] KAT Oblique
Post by: Diggidy on Tue, 08 June 2021, 16:40:00
I'm willing to give a company a chance if they are trying to change production to better their product; however, the lack of communication is what is concerning to me. Additionally, if they have been communication with you for this keyset but ghosting mac - that's even more concerning to me.

I love this set and I'm all in for test base, accents, and inverse - I just hope it actually gets to the point where we can confidently say they're going to be able to run this.
Title: Re: [IC] KAT Oblique
Post by: Vala on Tue, 08 June 2021, 20:18:02
Inverse looking dangerously clean :eek:
Title: Re: [IC] KAT Oblique
Post by: hardreturn on Tue, 08 June 2021, 21:57:07
would very much like this
Title: Re: [IC] KAT Oblique
Post by: LordOwen on Wed, 09 June 2021, 00:08:14
It's like typing on my childhood! Love it.
Title: Re: [IC] KAT Oblique
Post by: Poet_Li on Wed, 09 June 2021, 00:23:37
Could you add R3 2U Backspace in 40s kit?
Title: Re: [IC] KAT Oblique
Post by: ggggggg on Wed, 09 June 2021, 00:47:53
Why not split alphas and mods like all the other KAT and KAM sets are doing? I like being able to purchase exactly what I want, no more no less.
Title: Re: [IC] KAT Oblique
Post by: guill3m on Wed, 09 June 2021, 00:56:15
Yes, I need this.

Edit:

Please consider moving the Alice B to Base. This would allow someone to buy the Forties kit instead of spacebars for wider support (or just use Shifts for spacebars for the more budget minded). As it stands right now someone wanting 40s and Alice support would need to buy the spacebars kit solely for the extra "B" key as the necessary spacebars for Alice are also present in the Forties kit. With KAT's MOQ system, the Forties kit canibalising the sales of the spacebars kit should not be an issue as it will be made anyway regardless if it sells 3 or 300 assuming the global MOQ is reached.

The Spacebars kit could also benefit from having two 3u spacebars for Type K, and a 1u spacebar (together with those 3u) for 7u split spacebar.
Title: Re: [IC] KAT Oblique
Post by: xmaviik on Wed, 09 June 2021, 06:22:18
ISO-PT would be cool to support ;)
Title: Re: [IC] KAT Oblique
Post by: dr_derivative on Wed, 09 June 2021, 07:21:26
Why not split alphas and mods like all the other KAT and KAM sets are doing? I like being able to purchase exactly what I want, no more no less.

Looking at the numbers for previous GBs it should actually be cheapest for the average buyer this way.

If we have separate alphas and mods, a 40% user would only need alphas + 40%. But the 40% kit would end up being quite a bit bigger to include necessary keys currently available in the base kit (bottom row keys, shifts, etc). This means that people who want to buy kits for 60%+ and 40% support would actually end up with a ton of duplicate keys. Based on previous GB numbers a pretty big majority of 40% buyers usually buy 60%+ support too, so these kits make it cheapest for these users.
Title: Re: [IC] KAT Oblique
Post by: dr_derivative on Wed, 09 June 2021, 07:27:58
Good luck, although I'm out of any KAT until they normalize their qc standards.

...

the bleed on milkshake looks bad. there's also the lack of communications with macsurfy for KAT refined (https://geekhack.org/index.php?topic=108835.0). he's heard nothing for months and set appears to be stalled. i'm not at all optimistic. doc, i'm a fan of your work. i'm just not convinced KAT is the optimal choice atm. if anyone has different information i would love to hear it.

I'm willing to give a company a chance if they are trying to change production to better their product; however, the lack of communication is what is concerning to me. Additionally, if they have been communication with you for this keyset but ghosting mac - that's even more concerning to me.

I love this set and I'm all in for test base, accents, and inverse - I just hope it actually gets to the point where we can confidently say they're going to be able to run this.

All my communication has been through zFrontier, not Keyreative directly.

Regardless, for the quality/wait time/communication concerns we have some potential solutions. One of those (not confirmed yet btw) is to run this as an in-stock set rather than a traditional GB.
Title: Re: [IC] KAT Oblique
Post by: radar on Wed, 09 June 2021, 08:33:26
The project looks great!  I'm very interested, and curious if a R4 delete key can be added to the base kits?
Title: Re: [IC] KAT Oblique
Post by: sevenseacat on Wed, 09 June 2021, 10:51:55
Yeah I like this. Inverse kit is 🔥 and thank you for Colemak support! (even though it's only in light, not dark, will still buy)
Seconding request for renders with inverse alphas and some accent mods :D
Title: Re: [IC] KAT Oblique
Post by: ZongZiWang on Wed, 09 June 2021, 13:19:47
Good luck, although I'm out of any KAT until they normalize their qc standards.

...

the bleed on milkshake looks bad. there's also the lack of communications with macsurfy for KAT refined (https://geekhack.org/index.php?topic=108835.0). he's heard nothing for months and set appears to be stalled. i'm not at all optimistic. doc, i'm a fan of your work. i'm just not convinced KAT is the optimal choice atm. if anyone has different information i would love to hear it.

I'm willing to give a company a chance if they are trying to change production to better their product; however, the lack of communication is what is concerning to me. Additionally, if they have been communication with you for this keyset but ghosting mac - that's even more concerning to me.

I love this set and I'm all in for test base, accents, and inverse - I just hope it actually gets to the point where we can confidently say they're going to be able to run this.

All my communication has been through zFrontier, not Keyreative directly.

Regardless, for the quality/wait time/communication concerns we have some potential solutions. One of those (not confirmed yet btw) is to run this as an in-stock set rather than a traditional GB.

For the quality concerns, in-stock set does not help too much. I got Kitty KAT from in-stock drop and my 7u spacebar is unusable (due to it's dark 5-side dye-sub process?), and submitted the claim form which has not received any response or replacement after 3 months as of today, where I cannot use the set on most of my boards :( Hope we can have better QC to catch those no matter it's GB or in-stock.
Title: Re: [IC] KAT Oblique
Post by: g_hack_it on Thu, 10 June 2021, 08:11:14
Really wish this had an f-row with media legends to match current apple boards. Otherwise I love pretty much everything about it.

Sent from my LM-V600 using Tapatalk

Title: Re: [IC] KAT Oblique
Post by: harlekein on Thu, 10 June 2021, 08:19:36
Why not split alphas and mods like all the other KAT and KAM sets are doing? I like being able to purchase exactly what I want, no more no less.

Based on previous GB numbers a pretty big majority of 40% buyers usually buy 60%+ support too, so these kits make it cheapest for these users.

Quite surprising and if this is the case, then I understand your decision.

But as an ortho user, this is just a hard pass for me. There's just no way I'm buying base kit + forties + forties accent + colevrak when other KAT offerings had alphas + ortho with accents included. GL.
Title: Re: [IC] KAT Oblique
Post by: Lexmor on Thu, 10 June 2021, 13:36:18
Any chance for a south kit?
Title: Re: [IC] KAT Oblique
Post by: asciisii on Thu, 10 June 2021, 14:13:46
Will watch cautiously as it is KAT, but I am interested. Personally don't mind this kitting
Title: Re: [IC] KAT Oblique
Post by: dvdrl on Thu, 10 June 2021, 16:00:51
Wow, this looks amazing! I will buy the set no matter how long it will take Keyrative to ship it.

Would it be possible to also include a 1u R2 ctrl into the fourties kit? That would be convenient for orthos.
If you worry about having to include too many keys into that kit, offering both a fourties kit and an ortho mod kit could be an option. Thanks for considering.
Title: Re: [IC] KAT Oblique
Post by: ZongZiWang on Thu, 10 June 2021, 17:11:29
Will this be double shot PBT or dye-sub?
Title: Re: [IC] KAT Oblique
Post by: honorless on Thu, 10 June 2021, 18:44:09
Why not split alphas and mods like all the other KAT and KAM sets are doing? I like being able to purchase exactly what I want, no more no less.

Looking at the numbers for previous GBs it should actually be cheapest for the average buyer this way.

If we have separate alphas and mods, a 40% user would only need alphas + 40%. But the 40% kit would end up being quite a bit bigger to include necessary keys currently available in the base kit (bottom row keys, shifts, etc). This means that people who want to buy kits for 60%+ and 40% support would actually end up with a ton of duplicate keys. Based on previous GB numbers a pretty big majority of 40% buyers usually buy 60%+ support too, so these kits make it cheapest for these users.

I'd like to know what statistics or group buys you're examining to draw this conclusion. It's important because the vast majority of "ortho/40s" kits cannot actually support staggered 40s, which forces the purchase of 60+% mods.
Well, yeah—if I have to buy 60+% mods to actually use the set at all, I'm either going to buy them and consider that the cost of entry, or just pass because all in it's too expensive. Just recently I ended up passing on the 40s kit for SA Ramses because after adding in the TKL mods that were required, it was just way too much for a bunch of keys I'd never use.

Forcing ortho users in particular into an entire set of TKL staggered mods is particularly crappy as they won't use the vast majority of these keys. (Even more of those keys will go unused if they're not QWERTY users or use international layouts...)

There are reasons it's so common to separate alphas and mods when the manufacturer/MOQ system allows this. I would urge you to at the very least poll prospective Oblique buyers specifically about the separation of alphas and mods in your IC form.
Title: Re: [IC] KAT Oblique
Post by: Extra Fox on Thu, 10 June 2021, 19:40:19
I'm easily in for both the Light and Inverse colors. This seems like a slam dunk of a set.
I so sincerely hope it become a real thing.  :thumb:
Title: Re: [IC] KAT Oblique
Post by: bobtheguitar on Thu, 10 June 2021, 19:44:33
Really wish this had an f-row with media legends to match current apple boards. Otherwise I love pretty much everything about it.

Sent from my LM-V600 using Tapatalk
That would be :thumb:
Title: Re: [IC] KAT Oblique
Post by: yotasan on Thu, 10 June 2021, 20:16:15
Holy crap I need this.
Title: Re: [IC] KAT Oblique
Post by: dr_derivative on Thu, 10 June 2021, 20:19:09
Why not split alphas and mods like all the other KAT and KAM sets are doing? I like being able to purchase exactly what I want, no more no less.

Looking at the numbers for previous GBs it should actually be cheapest for the average buyer this way.

If we have separate alphas and mods, a 40% user would only need alphas + 40%. But the 40% kit would end up being quite a bit bigger to include necessary keys currently available in the base kit (bottom row keys, shifts, etc). This means that people who want to buy kits for 60%+ and 40% support would actually end up with a ton of duplicate keys. Based on previous GB numbers a pretty big majority of 40% buyers usually buy 60%+ support too, so these kits make it cheapest for these users.

I'd like to know what statistics or group buys you're examining to draw this conclusion. It's important because the vast majority of "ortho/40s" kits cannot actually support staggered 40s, which forces the purchase of 60+% mods.
Well, yeah—if I have to buy 60+% mods to actually use the set at all, I'm either going to buy them and consider that the cost of entry, or just pass because all in it's too expensive. Just recently I ended up passing on the 40s kit for SA Ramses because after adding in the TKL mods that were required, it was just way too much for a bunch of keys I'd never use.

Forcing ortho users in particular into an entire set of TKL staggered mods is particularly crappy as they won't use the vast majority of these keys. (Even more of those keys will go unused if they're not QWERTY users or use international layouts...)

There are reasons it's so common to separate alphas and mods when the manufacturer/MOQ system allows this. I would urge you to at the very least poll prospective Oblique buyers specifically about the separation of alphas and mods in your IC form.

I'll rerun the numbers on this to make sure. I think a lot of people (myself included) generally buy support for multiple layouts so that when a keyset arrives it can be used on whichever board I decide at the time. Regardless, these are still provisional kit layouts so nothing is set in stone.

Since this might end up becoming an in-stock set rather than a GB I will need try to keep the number of kits to a minimum though. I might even have to cut or combine some of the current kits so that the vendors aren't taking too much risk with predicting sales of the child kits. No vendor wants to have a ton of alphas left but no mods or vice-versa. I'll try to see what I can do about optimizing kit layouts for 40%/colevrak users though.
Title: Re: [IC] KAT Oblique
Post by: sevenseacat on Fri, 11 June 2021, 00:00:46
I'm one who often buys 40s kits just in case. And because I have no idea what keyboard I'll be using in a year or two when the set actually ships. :D
Title: Re: [IC] KAT Oblique
Post by: scoopbb on Fri, 11 June 2021, 19:03:49
Why not split alphas and mods like all the other KAT and KAM sets are doing? I like being able to purchase exactly what I want, no more no less.

Looking at the numbers for previous GBs it should actually be cheapest for the average buyer this way.

If we have separate alphas and mods, a 40% user would only need alphas + 40%. But the 40% kit would end up being quite a bit bigger to include necessary keys currently available in the base kit (bottom row keys, shifts, etc). This means that people who want to buy kits for 60%+ and 40% support would actually end up with a ton of duplicate keys. Based on previous GB numbers a pretty big majority of 40% buyers usually buy 60%+ support too, so these kits make it cheapest for these users.

I'd like to know what statistics or group buys you're examining to draw this conclusion. It's important because the vast majority of "ortho/40s" kits cannot actually support staggered 40s, which forces the purchase of 60+% mods.
Well, yeah—if I have to buy 60+% mods to actually use the set at all, I'm either going to buy them and consider that the cost of entry, or just pass because all in it's too expensive. Just recently I ended up passing on the 40s kit for SA Ramses because after adding in the TKL mods that were required, it was just way too much for a bunch of keys I'd never use.

Forcing ortho users in particular into an entire set of TKL staggered mods is particularly crappy as they won't use the vast majority of these keys. (Even more of those keys will go unused if they're not QWERTY users or use international layouts...)

There are reasons it's so common to separate alphas and mods when the manufacturer/MOQ system allows this. I would urge you to at the very least poll prospective Oblique buyers specifically about the separation of alphas and mods in your IC form.

I'll rerun the numbers on this to make sure. I think a lot of people (myself included) generally buy support for multiple layouts so that when a keyset arrives it can be used on whichever board I decide at the time. Regardless, these are still provisional kit layouts so nothing is set in stone.

Since this might end up becoming an in-stock set rather than a GB I will need try to keep the number of kits to a minimum though. I might even have to cut or combine some of the current kits so that the vendors aren't taking too much risk with predicting sales of the child kits. No vendor wants to have a ton of alphas left but no mods or vice-versa. I'll try to see what I can do about optimizing kit layouts for 40%/colevrak users though.

please no ritual sacrifice of ergo kit
Title: Re: [IC] KAT Oblique
Post by: jagger27 on Fri, 11 June 2021, 22:11:19
I am a simple man. I see AEK legends, I buy

KAT definitely has some growing pains but I think it's worth it here, as long as proper QC can be assured. Delays are one thing, but unusable 7U spacebars are completely unacceptable.
Title: Re: [IC] KAT Oblique
Post by: MrMar on Sat, 12 June 2021, 02:18:25
Very in.
Title: Re: [IC] KAT Oblique
Post by: Little4Real on Mon, 21 June 2021, 22:17:16
Considering that KAT's MOQ is based upon keys sold and not the total number of sets sold, I absolutely do not understand why alphas aren't split from the mods and why there's no chance to bring Katakana sublegends back.

HARD PASS for me
Title: Re: [IC] KAT Oblique
Post by: D3LTA on Fri, 25 June 2021, 07:24:15
Another ortho + colevrak user here. Was excited to see this IC but it's currently a pass with the proposed kit structure.
Title: Re: [IC] KAT Oblique
Post by: Vizir on Fri, 25 June 2021, 10:44:11
I don't understand why the Ortho and colverak options were removed. Keyreative only counts total kits, not moq of individual kits. Sigh.

Sent from my Pixel 4 XL using Tapatalk

Title: Re: [IC] KAT Oblique
Post by: HappyB0T on Fri, 25 June 2021, 11:07:41
Really interesting for me. Please separate the alphas from the mods so that people can mix and match as they wish. Generally I understand that it is easier to see the coverage / identify keys but hopefully the final kitting will be different.
Title: Re: [IC] KAT Oblique
Post by: harlekein on Fri, 25 June 2021, 11:13:51

Since this might end up becoming an in-stock set rather than a GB I will need try to keep the number of kits to a minimum though.

One easy way to reduce number of kits is to add accents to the mod kits.
Title: Re: [IC] KAT Oblique
Post by: Klackygears on Sat, 26 June 2021, 14:14:39
Oh man, if the 40's / ortho kits are still going to be made, this is a for sure buy for me. Without that support though, it won't work for me. :-(
Title: Re: [IC] KAT Oblique
Post by: dr_derivative on Sat, 26 June 2021, 15:52:00
Since this might end up becoming an in-stock set rather than a GB I will need try to keep the number of kits to a minimum though.

One easy way to reduce number of kits is to add accents to the mod kits.

I might well end up doing that

I don't understand why the Ortho and colverak options were removed. Keyreative only counts total kits, not moq of individual kits. Sigh.

Sent from my Pixel 4 XL using Tapatalk

Oh man, if the 40's / ortho kits are still going to be made, this is a for sure buy for me. Without that support though, it won't work for me. :-(

Ortho and Colevrak options are still there. The issue is the combined base kits (alphas+mods) kinda suck for ortho/colevrak users

I'm currently discussing with the vendors to see what they are willing to do with kitting. I'll upload revised kitting when they get back to me
Title: Re: [IC] KAT Oblique
Post by: Jyobah on Sat, 26 June 2021, 16:28:06
Good luck, although I'm out of any KAT until they normalize their qc standards.
between that, GMK 2 year waits with terrible last minute communications and some awefule PBT ones good luck, choices are slim now.
Title: Re: [IC] KAT Oblique
Post by: quasarcreator on Sun, 27 June 2021, 10:29:03
I'm in for the Icon base, novelties, and potentially numpad.
Was just recently thinking about how cool the font on the old AEK boards is, and now this comes around!
Do keep us all posted, keen to jump onto it as soon as it enters group buy.
Quick question: will there be deskmats?
Title: Re: [IC] KAT Oblique
Post by: L4ll1g470r on Sun, 08 August 2021, 05:33:51
I’m in. A really cool kit would be one with the f-row sublegends for media keys, expose, brightness and similar - mix the new and old.
Title: Re: [IC] KAT Oblique
Post by: ESJvR on Sun, 08 August 2021, 13:53:04
Looks awesome, especially like the inverse one! Is there a chance for inverse International Kit or would that not hit MOQ?
Title: Re: [IC] KAT Oblique [on hold]
Post by: dr_derivative on Wed, 08 September 2021, 13:42:42
Hi everyone, it's been a while since the last update.

When I launched this IC I thought many of KAT's previous QC issues had been mainly resolved. However, there were a lot of concerns raised about quality in this thread and especially in the IC form. Since launching this IC, I have also received 2 of my own KAT GB orders, and honestly the dye-sub quality of both left a lot to be desired. So for the time being I'm putting this set on hold since the last thing I want to do is disappoint people with a sub-par product.

This IC has given me some good feedback which will make its way into the next version of Oblique, whether it's in KAT or another profile. Also got lots of good movie, TV, and even one book recommendation in the IC form. Unfortunately quite a few that aren't available on Netflix here in Ireland, but I'm sure I'll be able to watch them all eventually.

In the mean time things look like they might finally start moving again with TA Origins, and I have a few other projects I'm working on which might get revealed soon too