Author Topic: [GB] Fox Lab - Time 80 Reforged (Read 271748 times)

Capsy · « **Reply #550 on:** Tue, 29 June 2021, 08:18:40 »

Quote from: lovidore on Tue, 29 June 2021, 05:33:24

I got mine in just now through Fedex. No delivery notification, no SMS, nothing. It just arrived and I was lucky to be home when it did.

Hang in there, guys!

Are you in the US? I have a DHL tracking number (stuck on label created), not FedEx.

lovidore · « **Reply #551 on:** Tue, 29 June 2021, 10:34:51 »

Quote from: Capsy on Tue, 29 June 2021, 08:18:40

Quote from: lovidore on Tue, 29 June 2021, 05:33:24
I got mine in just now through Fedex. No delivery notification, no SMS, nothing. It just arrived and I was lucky to be home when it did.

Hang in there, guys!
Are you in the US? I have a DHL tracking number (stuck on label created), not FedEx.

I live in the Middle East!

HaX · « **Reply #552 on:** Tue, 29 June 2021, 11:54:21 »

I still haven’t received my board or heard back from the email I sent to Senter. DHL tracking only says the label was created on June 11.

lazergician · « **Reply #553 on:** Tue, 29 June 2021, 14:06:06 »

Quote from: HaX on Tue, 29 June 2021, 11:54:21

I still haven’t received my board or heard back from the email I sent to Senter. DHL tracking only says the label was created on June 11.

It took quite a while for mine to arrive after the label was created. I'd say you're still not in the panic zone, so stay in there!

Tekniqs · « **Reply #554 on:** Tue, 29 June 2021, 16:07:08 »

Quote from: HaX on Tue, 29 June 2021, 11:54:21

I still haven’t received my board or heard back from the email I sent to Senter. DHL tracking only says the label was created on June 11.

i'm in the same situation/same dates.

Surefoot · « **Reply #555 on:** Wed, 30 June 2021, 02:36:44 »

If anyone managed to edit a .dxf for a full plate file i'd be very interested (before i invest a lot of time converting the existing split plate file...)..

24kpurehandsome · « **Reply #556 on:** Wed, 30 June 2021, 07:14:35 »

My board has arrived!!

outerspace · « **Reply #557 on:** Wed, 30 June 2021, 07:27:45 »

Quote from: 24kpurehandsome on Wed, 30 June 2021, 07:14:35

My board has arrived!!

Did it just magically show up without any tracking updates? Mine has also just been stuck in "Shipper has generated a shipment label, but the shipment has not yet been handed over to DHL" since June 12th.

24kpurehandsome · « **Reply #558 on:** Wed, 30 June 2021, 11:07:17 »

No, I had a tracking number from DHL. It was on time too.

Minam · « **Reply #559 on:** Wed, 30 June 2021, 20:49:03 »

And after months of "it will ship by end of the month" we have arrived at the last day of june and my board still hasn't shipped. I heard brass parts weren't even fixed anyways. Amazing.

24kpurehandsome · « **Reply #560 on:** Wed, 30 June 2021, 22:35:22 »

Going to check my brass weight when I go over to my brothers

Pajamakid · « **Reply #561 on:** Fri, 02 July 2021, 01:04:08 »

Anyone have any update on DHL awaiting for pickup?

Angelsin · « **Reply #562 on:** Fri, 02 July 2021, 01:48:48 »

How do I change the RGB color of the badge?

wybaugh · « **Reply #563 on:** Fri, 02 July 2021, 15:51:57 »

Quote from: Pajamakid on Fri, 02 July 2021, 01:04:08

Anyone have any update on DHL awaiting for pickup?

I'm in the same boat since June 11th.

Found this on their website:

Quote

Time80RE GB orders:

I received several reports that the DHL tracking numbers were created on 11th but the status has never been changed since then.

I've consulted with the shipping proxy. One possible reason is that the tracking numbers were expired before the freight space is allocated. Hong Kong DHL is having freight space shortages right now. The old tracking numbers will be replaced with new ones once the freight space is allocated.

If your tracking numbers have such issues. Please send an email to me (runninghack@gmail.com) . I'll reply to you once I get the updated tracking numbers.

All I can do is shake my head.

Leo66 · « **Reply #564 on:** Sat, 03 July 2021, 17:08:02 »

REALLY GOOD LOOKING BOTTOM

Leo66 · « **Reply #565 on:** Sat, 03 July 2021, 17:16:28 »

Get a red one. Nice

Capsy · « **Reply #566 on:** Mon, 05 July 2021, 13:48:05 »

My tracking number generated on June 11th just updated to shipment picked up. Just FYI for everyone who's in the same boat as me. Looks like they're moving.

windchimes · « **Reply #567 on:** Tue, 06 July 2021, 03:43:11 »

got my blue recently and it is.. not even close to the renders. not a bad color, but not what i expected at all

wybaugh · « **Reply #568 on:** Tue, 06 July 2021, 15:15:08 »

Quote from: windchimes on Tue, 06 July 2021, 03:43:11

got my blue recently and it is.. not even close to the renders. not a bad color, but not what i expected at all
Show Image

:'(

I'm waiting for my blue to show up and definitely not the color I was expecting either. Is it more of a teal?

Loveyuri · « **Reply #569 on:** Wed, 07 July 2021, 00:58:34 »

Just got a tracking update for the blue color for. Man, that blue is not what I expected it :/

HaX · « **Reply #570 on:** Wed, 07 July 2021, 13:01:03 »

Looks like mine will be in next week. Hoping DHL is early and get it during the weekend.

DukeEsquire · « **Reply #571 on:** Wed, 07 July 2021, 13:07:29 »

Wow that blue is really different from the prototypes.

Legoo · « **Reply #572 on:** Wed, 07 July 2021, 13:58:57 »

Hey Time enthusiasts, I have made an ISO Tsangan plate file for myself, and I have one brass plate left, so if anyone is looking for one, let me know by sending a pm!

Here is what the layout looks like:

outerspace · « **Reply #573 on:** Wed, 07 July 2021, 14:19:29 »

I don't understand why the blue can be so different from the pictures shown during GB?

itwasyohan · « **Reply #574 on:** Wed, 07 July 2021, 14:41:57 »

The json files on the github do not work.

8six753o9 · « **Reply #575 on:** Wed, 07 July 2021, 19:50:43 »

Here’s a picture of my blue. It’s the best I can do with indoor lighting.

Also if you have a DHL tracking, try using AfterShip or 17TRACK app. I normally use ParcelTrack but it seems to stop tracking DHL shipments. The other apps worked perfectly.

//gainsborough · « **Reply #576 on:** Wed, 07 July 2021, 22:37:59 »

If anyone is interested in swapping LED accents let me know - mine is red. I am open to most of the colors.

Lufenia · « **Reply #577 on:** Wed, 07 July 2021, 23:27:52 »

Quote from: //gainsborough on Wed, 07 July 2021, 22:37:59

If anyone is interested in swapping LED accents let me know - mine is red. I am open to most of the colors.

You're talking about the led on the badge?

It's RGB programmable

//gainsborough · « **Reply #578 on:** Wed, 07 July 2021, 23:30:28 »

Quote from: Lufenia on Wed, 07 July 2021, 23:27:52

Quote from: //gainsborough on Wed, 07 July 2021, 22:37:59
If anyone is interested in swapping LED accents let me know - mine is red. I am open to most of the colors.

You're talking about the led on the badge?

It's RGB programmable

nah nah - the actual badge itself. the thing next to "TIME".

dakdakgoose · « **Reply #579 on:** Thu, 08 July 2021, 01:22:36 »

Quote from: wybaugh on Tue, 06 July 2021, 15:15:08

Quote from: windchimes on Tue, 06 July 2021, 03:43:11
got my blue recently and it is.. not even close to the renders. not a bad color, but not what i expected at all
Show Image

:'(

I'm waiting for my blue to show up and definitely not the color I was expecting either. Is it more of a teal?

I actually feel like the pictures in the beginning of the GB thread are pretty close to the one I got. I feel like the picture there isn't very accurate. My picture here is in full light, in normal room lighting I'd say it looks a bit like a denim-ish blue.

itwasyohan · « **Reply #580 on:** Thu, 08 July 2021, 06:16:41 »

The pcb I received is defective. I sent an email, but I thought I'd post here as well to get some help. The f12, backspace, nackslash, enter, and right control don't work.

supbeez · « **Reply #581 on:** Thu, 08 July 2021, 08:03:29 »

Quote from: dakdakgoose on Thu, 08 July 2021, 01:22:36

Quote from: wybaugh on Tue, 06 July 2021, 15:15:08
Quote from: windchimes on Tue, 06 July 2021, 03:43:11
got my blue recently and it is.. not even close to the renders. not a bad color, but not what i expected at all
Show Image

:'(

I'm waiting for my blue to show up and definitely not the color I was expecting either. Is it more of a teal?

I actually feel like the pictures in the beginning of the GB thread are pretty close to the one I got. I feel like the picture there isn't very accurate. My picture here is in full light, in normal room lighting I'd say it looks a bit like a denim-ish blue. (Attachment Link)

Ok this is not bad at all. Can't wait for mine, it's already in my state :D

directheatedtriode · « **Reply #582 on:** Thu, 08 July 2021, 09:33:42 »

~~Is there anyone in a last, last batch thathasn't received a tracking number yet? I've verified this by checking my order on the website.~~ got my tracking number by emailing them

HaX · « **Reply #583 on:** Thu, 08 July 2021, 14:24:17 »

Mine came in, downloaded json to VIA and it worked right out of the box. But noticed there wasn’t a way to change the lighting for the led badge. Anyone know how to change color or brightness on it?

supbeez · « **Reply #584 on:** Fri, 09 July 2021, 12:50:08 »

Ok this blue is gorgeous

Lufenia · « **Reply #585 on:** Sat, 10 July 2021, 07:56:47 »

I've been trying to get ahold of them for a while for a problem with my board. I've tried a couple of email addresses in the last 2 weeks already and so far, zero response. This is pretty darn frustrating.

HaX · « **Reply #586 on:** Sat, 10 July 2021, 15:57:08 »

Quote from: Lufenia on Sat, 10 July 2021, 07:56:47

I've been trying to get ahold of them for a while for a problem with my board. I've tried a couple of email addresses in the last 2 weeks already and so far, zero response. This is pretty darn frustrating.

runninghack@gmail.com

That the email I used and received a reply last week. It may take sometime to get back with you. If he hasn’t replied back for awhile trying sending another email to this email.

Capsy · « **Reply #587 on:** Sat, 10 July 2021, 16:03:59 »

Got my board today. Black brass and it's beautiful.

First Hit Bash Designs · « **Reply #588 on:** Sat, 10 July 2021, 18:00:28 »

Finally arrived yesterday but the wait was worth it. Lilac/Brass is GORGEOUS. I think the lilac is honestly more mauve, like a rich maroon purple, but it's amazing and I love the color!

Will look incredible with GMK Symbiote eventually.

directheatedtriode · « **Reply #589 on:** Sun, 11 July 2021, 07:42:18 »

Quote from: First Hit Bash Designs on Sat, 10 July 2021, 18:00:28

Will look incredible with GMK Symbiote eventually.

Eventually for sure, with the custom colors and huge number of sets that have been in IC/GB I wouldn't be surprised if this is 2-3 years away

dukedagod · « **Reply #590 on:** Sun, 11 July 2021, 14:53:16 »

Does anyone happen to know if Fox Lab has a support email or discord channel?
I never received the extra pcb and plate I ordered, and I cant seem to find an email on their site.

outerspace · « **Reply #591 on:** Sun, 11 July 2021, 17:16:46 »

Quote from: dukedagod on Sun, 11 July 2021, 14:53:16

Does anyone happen to know if Fox Lab has a support email or discord channel?
I never received the extra pcb and plate I ordered, and I cant seem to find an email on their site.

Try runninghack@gmail.com

Could take several days before you get a reply.

First Hit Bash Designs · « **Reply #592 on:** Sun, 11 July 2021, 21:58:48 »

I did the QMK configurator thing to set up RGB control on a secondary layer for the badge, but this leaves me unable to configure the board with VIA.

First time trying QMK configurator so forgive my ignorance, but to use VIA I would have to do some writing of a custom JSON, correct? I did some quick searching on the subject and it seems like a little more time than I'd like to dedicate just to be able to use VIA along with my custom QMK configurated firmware. The JSON from Fox Lab doesn't work with my custom firmware, I assume because it doesn't match something VIA is checking for.

Overall I'm thrilled with my build though. The quality is top notch. Incredible sound (using L/F Banana Splits); fantastic feel when typing, very soft; flawless finish; so many things I'm happy about with this board.

BTW anyone know what the standard non-split plate material is? It looks like e-coated brass, same as my weights, but I couldn't find any info specifying what material it is on the Fox Lab page or GB/IC pages.

TieuNgu · « **Reply #593 on:** Tue, 13 July 2021, 10:20:20 »

I received the board with some cosmetics damages. Does anyone know a good way to contact Fox Lab? Thanks!

shansoft · « **Reply #594 on:** Tue, 13 July 2021, 19:05:40 »

Quote from: TieuNgu on Tue, 13 July 2021, 10:20:20

I received the board with some cosmetics damages. Does anyone know a good way to contact Fox Lab? Thanks!

My board also come with some weird anodizing smudge / marks.

Tekniqs · « **Reply #595 on:** Tue, 13 July 2021, 20:43:07 »

My board came in near the end of last week. I should probably check it for damages/defects

HaX · « **Reply #596 on:** Tue, 13 July 2021, 22:41:29 »

Quote from: shansoft on Tue, 13 July 2021, 19:05:40

Quote from: TieuNgu on Tue, 13 July 2021, 10:20:20
I received the board with some cosmetics damages. Does anyone know a good way to contact Fox Lab? Thanks!

My board also come with some weird anodizing smudge / marks.

Mine had a small smudge on the top case. I thought I could rub it out but it’s in the e-white surface. It’s really small and not sure if it’s worth the bother.

Makish · « **Reply #597 on:** Wed, 14 July 2021, 16:30:14 »

Sent an e-mail to senter via runninghack as I still haven't received a tracking number, but got no response about 7 days ago.

Is that e-mail still the appropriate way to contact Fox Labs/senter?

directheatedtriode · « **Reply #598 on:** Fri, 16 July 2021, 13:06:10 »

Got my powder grey, it's a very nice color; almost like a shale blue in certain light. Probably be my go to board for the various vintage/vintage theme sets that I've accumulated.

littleairbison · « **Reply #599 on:** Sun, 18 July 2021, 02:54:46 »

The PCB from my black Time 80 RE seems to be faulty. The PCB seems to be on the wrong layer by default. The Escape key resets the entire PCB, and other keys control the LED by default. I have flashed the PCB with a new layout in both QMK and VIA, but the same problem persists even after flashing a new layout. Has anyone else experienced this same issue or know a possible solution? This nearly makes the keyboard an expensive paper weight for me lol

News:

Author Topic: [GB] Fox Lab - Time 80 Reforged (Read 271748 times)