NEW USERS, READ THIS!
0 Members and 1 Guest are viewing this topic.
I've been asking the same. they said it would be 6 rows, but there would only be one button at the top. then went on to say that the design had not been finalized.I REALLY want a full 24 key numpad friend for this board. FULL 6 X 4 rows is what I need
Quote from: eagleheardt on Sat, 09 February 2019, 11:52:26I've been asking the same. they said it would be 6 rows, but there would only be one button at the top. then went on to say that the design had not been finalized.I REALLY want a full 24 key numpad friend for this board. FULL 6 X 4 rows is what I needI'd honestly be fine with a 5x4, but I'm guessing that would look small next to the board so 6x4 would work better?
Reading this review of the TGR-910RE has me a bit worried about the PC case:https://brianleereviews.wordpress.com/2018/12/14/review-yuktsis-tgr-910re-polycarbonate/Anyone know if these issues were raised in the IC and addressed by Senter?
Quote from: r4bbl3d4bbl3 on Tue, 12 February 2019, 15:00:20Reading this review of the TGR-910RE has me a bit worried about the PC case:https://brianleereviews.wordpress.com/2018/12/14/review-yuktsis-tgr-910re-polycarbonate/Anyone know if these issues were raised in the IC and addressed by Senter?I would expect those kinds of problems with a polycarbonate case. Discontinuity can only *REALLY* be sorted out if you machine it all from the same block (unibody) or take EXTREME care in manufacture of the separate parts. Warping, visual differences between units (and same-unit parts), finish differences, etc. are all side-effects of using a less stalwart material than the common metals we see.All reasons I won't buy PC multi-part cases. A polycarb Tofu or Klippe? Sure. Not for builds like this, though. Not yet.
Believing brian lee in 2k19 lmao, that's not even his board.
Quote from: beamingrobot on Tue, 12 February 2019, 18:22:25Believing brian lee in 2k19 lmao, that's not even his board.I don't know anything about that guy, is he not credible or something?
Quote from: r4bbl3d4bbl3 on Tue, 12 February 2019, 18:43:35Quote from: beamingrobot on Tue, 12 February 2019, 18:22:25Believing brian lee in 2k19 lmao, that's not even his board.I don't know anything about that guy, is he not credible or something?I like his reviews and blog a lot, but I think he got a bit of hate in the community for this post: https://brianleereviews.wordpress.com/2019/01/11/opinion-the-state-of-keyboard-design/
I read this as there will be extra Aluminum parts. Quote from: senter on Fri, 18 January 2019, 15:17:05Quote from: MTXjunkie on Fri, 18 January 2019, 15:06:42So if we buy the base option just to secure a board during the preorder, we can always go back (within a reasonable amount of time) after the GB and buy the upgrades?Yes, there will be leftover parts for sure.
Quote from: MTXjunkie on Fri, 18 January 2019, 15:06:42So if we buy the base option just to secure a board during the preorder, we can always go back (within a reasonable amount of time) after the GB and buy the upgrades?Yes, there will be leftover parts for sure.
So if we buy the base option just to secure a board during the preorder, we can always go back (within a reasonable amount of time) after the GB and buy the upgrades?
Quote from: Slavadavadingdong on Tue, 12 February 2019, 20:34:08Quote from: r4bbl3d4bbl3 on Tue, 12 February 2019, 18:43:35Quote from: beamingrobot on Tue, 12 February 2019, 18:22:25Believing brian lee in 2k19 lmao, that's not even his board.I don't know anything about that guy, is he not credible or something?I like his reviews and blog a lot, but I think he got a bit of hate in the community for this post: https://brianleereviews.wordpress.com/2019/01/11/opinion-the-state-of-keyboard-design/He probably got a bit frustrated with the dry spell we had there for a while. Took a bit before there was something new I wanted to buy into. The Grid 600 broke that spell for me.
Senter,Hey, I was curious about the extra parts you had mentioned above. Would you happen to have any extra hotswap PCBs that would work with my HHKB layout? If so I would like to know if I could add one to my order if we can do that.Thanks!
Quote from: boog on Thu, 14 February 2019, 16:01:00Senter,Hey, I was curious about the extra parts you had mentioned above. Would you happen to have any extra hotswap PCBs that would work with my HHKB layout? If so I would like to know if I could add one to my order if we can do that.Thanks!Yes
Can anyone who ordered the hotswap plate help me out. I am trying to find a set of caps to go with this board but it seems like this layout is going to be a hard one to find something compatible. I am interested in getting this kit to match the /dev/tty set I have on my Novatouch but it doesn't seem like it has the keys needed to fit that layout. If I went with the standard non-hotswap plate/PCB would it just fit a normal set of keys like I've highlighted in the image below? (Attachment Link)
Quote from: r4bbl3d4bbl3 on Sat, 23 February 2019, 11:48:13Can anyone who ordered the hotswap plate help me out. I am trying to find a set of caps to go with this board but it seems like this layout is going to be a hard one to find something compatible. I am interested in getting this kit to match the /dev/tty set I have on my Novatouch but it doesn't seem like it has the keys needed to fit that layout. If I went with the standard non-hotswap plate/PCB would it just fit a normal set of keys like I've highlighted in the image below? (Attachment Link) Yup, what you have highlighted is a standard ANSI layout and you would be able to use that layout with the universal plate and normal PCB
Quote from: PoochZag on Sat, 23 February 2019, 12:05:04Quote from: r4bbl3d4bbl3 on Sat, 23 February 2019, 11:48:13Can anyone who ordered the hotswap plate help me out. I am trying to find a set of caps to go with this board but it seems like this layout is going to be a hard one to find something compatible. I am interested in getting this kit to match the /dev/tty set I have on my Novatouch but it doesn't seem like it has the keys needed to fit that layout. If I went with the standard non-hotswap plate/PCB would it just fit a normal set of keys like I've highlighted in the image below? (Attachment Link) Yup, what you have highlighted is a standard ANSI layout and you would be able to use that layout with the universal plate and normal PCBGotcha. So if I got the normal layout with hot swap PCB I’m out of luck for that standard layout?Sent from my iPhone using Tapatalk
Quote from: r4bbl3d4bbl3 on Sat, 23 February 2019, 12:42:53Quote from: PoochZag on Sat, 23 February 2019, 12:05:04Quote from: r4bbl3d4bbl3 on Sat, 23 February 2019, 11:48:13Can anyone who ordered the hotswap plate help me out. I am trying to find a set of caps to go with this board but it seems like this layout is going to be a hard one to find something compatible. I am interested in getting this kit to match the /dev/tty set I have on my Novatouch but it doesn't seem like it has the keys needed to fit that layout. If I went with the standard non-hotswap plate/PCB would it just fit a normal set of keys like I've highlighted in the image below? (Attachment Link) Yup, what you have highlighted is a standard ANSI layout and you would be able to use that layout with the universal plate and normal PCBGotcha. So if I got the normal layout with hot swap PCB I’m out of luck for that standard layout?Sent from my iPhone using TapatalkHotswap PCB doesn't support the regular ANSI layout. I can swap the PCB for you if you want.
Quote from: senter on Sat, 23 February 2019, 14:34:31Quote from: r4bbl3d4bbl3 on Sat, 23 February 2019, 12:42:53Quote from: PoochZag on Sat, 23 February 2019, 12:05:04Quote from: r4bbl3d4bbl3 on Sat, 23 February 2019, 11:48:13Can anyone who ordered the hotswap plate help me out. I am trying to find a set of caps to go with this board but it seems like this layout is going to be a hard one to find something compatible. I am interested in getting this kit to match the /dev/tty set I have on my Novatouch but it doesn't seem like it has the keys needed to fit that layout. If I went with the standard non-hotswap plate/PCB would it just fit a normal set of keys like I've highlighted in the image below? (Attachment Link) Yup, what you have highlighted is a standard ANSI layout and you would be able to use that layout with the universal plate and normal PCBGotcha. So if I got the normal layout with hot swap PCB I’m out of luck for that standard layout?Sent from my iPhone using TapatalkHotswap PCB doesn't support the regular ANSI layout. I can swap the PCB for you if you want.That would be great, thanks! I will just learn to solder I guess. Sent from my iPhone using Tapatalk
Quote from: r4bbl3d4bbl3 on Sat, 23 February 2019, 14:35:53Quote from: senter on Sat, 23 February 2019, 14:34:31Quote from: r4bbl3d4bbl3 on Sat, 23 February 2019, 12:42:53Quote from: PoochZag on Sat, 23 February 2019, 12:05:04Quote from: r4bbl3d4bbl3 on Sat, 23 February 2019, 11:48:13Can anyone who ordered the hotswap plate help me out. I am trying to find a set of caps to go with this board but it seems like this layout is going to be a hard one to find something compatible. I am interested in getting this kit to match the /dev/tty set I have on my Novatouch but it doesn't seem like it has the keys needed to fit that layout. If I went with the standard non-hotswap plate/PCB would it just fit a normal set of keys like I've highlighted in the image below? (Attachment Link) Yup, what you have highlighted is a standard ANSI layout and you would be able to use that layout with the universal plate and normal PCBGotcha. So if I got the normal layout with hot swap PCB I’m out of luck for that standard layout?Sent from my iPhone using TapatalkHotswap PCB doesn't support the regular ANSI layout. I can swap the PCB for you if you want.That would be great, thanks! I will just learn to solder I guess. Sent from my iPhone using TapatalkChange confirmed.
Do I need to change the plate too?
@senter, would you happen to know if there is clearance between the PCB and the bottom case for a sheet of sorbothane? And if so, how thick?
The prototypes of two versions of PCBs have all been finished. I'm going to place the final order. The final version will be in matte black color instead of green. The cases are still under manufacturing.
Show ImageThe prototypes of two versions of PCBs have all been finished. I'm going to place the final order. The final version will be in matte black color instead of green. The cases are still under manufacturing.
Senter, do you have any update on the ETA?什么时候能发货?
Quote from: yicaoyimu on Mon, 18 March 2019, 11:46:08Senter, do you have any update on the ETA?什么时候能发货?April. for cn orders
Quote from: lanyusea on Wed, 20 March 2019, 05:18:12Quote from: yicaoyimu on Mon, 18 March 2019, 11:46:08Senter, do you have any update on the ETA?什么时候能发货?April. for cn ordersI think april is ETA for all customers.