geekhack

geekhack Marketplace => Group Buys and Preorders => Topic started by: excluisve on Sat, 02 March 2019, 09:03:56

Title: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
Post by: excluisve on Sat, 02 March 2019, 09:03:56
Group Buy for  E6.5 - 65% custom keyboard.

(https://i.imgur.com/0BtP9wL.jpg)

(https://i.imgur.com/ljk37kT.jpg)

(https://i.imgur.com/T64Phoi.jpg)

(https://i.imgur.com/musIf4s.jpg)

(https://i.imgur.com/SJDK3Vx.jpg)

(https://i.imgur.com/t1Gp13T.jpg)

Hello everyone Excluisve here


About this keyboard we are spend much time on it also wait much time ,thankful it happens finally


Exclusive 65% custom keyboard

Features:


                                              * Polycarbonate / Aluminium / PVD brass are available

                                              * 5 degrees slope

                                              * QMK with  USB C

                                              * Rgb under glow

                                              * Brass PVD color : PVD gold and PVD rose gold

                                              * Available colors: E white - E black - dark red - dark grey -Wathet -Mao (only case )

About price info :

                                               - 330$ alu and pc kit  (when reach 100 orders will close link). Final price is depending on different materials and colors

                                               - full brass version limited to 10(FE ,numbers engraving),estimated price is 688$


More info:

                                           - PC version:       https://imgur.com/a/ZsSecSo

                                               -  E white  :        https://imgur.com/a/qnYTmua

                                               - More protype and colors : https://imgur.com/a/OBXKWlc

                                               - Rendering:        https://imgur.com/a/Uz8JqTd/

                                                Layout :
More
(https://i.imgur.com/c51Pa9t.jpg)
Gasket mount
More
(https://i.imgur.com/1JddzcC.jpg)


Groupbuy timeline:


                                               - Group Buy opens:    March      2, 2019

                                               - Group Buy closes:    March      9, 2019

                                               - Payment deadline :   March     15, 2019

                                               - Keyboards will be shipped out: Early June, 2019



Shipping info :
 
                                              When start to ship will sent invoce for shipping fee and sort shipping address


Terms     

Each boards cant be 100% but i will try my ability do it perfectly .

if you cant accept a little Inevitable ,especially PVD stuff (Quality is hard to control )please thinks twice before purchanse

For some orders i will consider to sale .thanks evryone : )

Free to leave suggestion and question.---




                                             
                                             


Title: Re: E6.5 - 65% custom keyboard
Post by: excluisve on Sat, 02 March 2019, 09:07:28
Reserved
Title: Re: E6.5 - 65% custom keyboard
Post by: Photoelectric on Sat, 02 March 2019, 09:32:13
Approval bump!  Good luck with the group buy!
Title: Re: E6.5 - 65% custom keyboard
Post by: 112227 on Sat, 02 March 2019, 09:32:28
woop woop
Title: Re: E6.5 - 65% custom keyboard
Post by: nickaster1 on Sat, 02 March 2019, 09:34:26
Letís gooooo
Title: Re: E6.5 - 65% custom keyboard
Post by: BAS1C on Sat, 02 March 2019, 09:35:47
NICE! I didn’t have my font link chosen yet. Can we edit the form later, or on google sheets?
Title: Re: E6.5 - 65% custom keyboard
Post by: SolidCactus on Sat, 02 March 2019, 09:37:09
Awesome!
Title: Re: E6.5 - 65% custom keyboard
Post by: jcwleo on Sat, 02 March 2019, 09:38:10
Can i modify my form?
Title: Re: E6.5 - 65% custom keyboard
Post by: neojonathan on Sat, 02 March 2019, 09:38:26
Would it be possible to edit the form later since choosing nametags and fonts is gonna take some time ?
Title: Re: E6.5 - 65% custom keyboard
Post by: Auxo on Sat, 02 March 2019, 09:39:04
REEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE
Title: Re: E6.5 - 65% custom keyboard
Post by: eyedrop on Sat, 02 March 2019, 09:39:23
Go go go!!
Title: Re: E6.5 - 65% custom keyboard
Post by: Darknight00z on Sat, 02 March 2019, 09:39:53
Does the name plate fit the e6 as well?
Title: E6.5 - 65% custom keyboard
Post by: 8six753o9 on Sat, 02 March 2019, 09:40:53
I already filled out a form but was wondering if we will be able edit later for the nameplate option and possible color changed.

EDIT: I finally read entire OP. Limited to 100.
Title: Re: E6.5 - 65% custom keyboard
Post by: Starston3 on Sat, 02 March 2019, 09:41:04
Awesome. Filled out.
Title: Re: E6.5 - 65% custom keyboard
Post by: 8six753o9 on Sat, 02 March 2019, 09:42:17
Does the name plate fit the e6 as well?

I believe in the IC he said no as itís a different way the nameplate is mounted.  Iím on mobile so itís may take a while for me to find the link.
Title: Re: E6.5 - 65% custom keyboard
Post by: hsunwoo1221 on Sat, 02 March 2019, 09:42:47
Submitted. I had my font link ready, but was in too much of a hurry to actually write it lol. Hope we could edit the form later.
Title: Re: E6.5 - 65% custom keyboard
Post by: allenzeng1996 on Sat, 02 March 2019, 09:43:18
GOT IN! LETS GOO
Title: Re: E6.5 - 65% custom keyboard
Post by: Keebmeupscotty on Sat, 02 March 2019, 09:43:58
Wooooo
Title: Re: E6.5 - 65% custom keyboard
Post by: MTXjunkie on Sat, 02 March 2019, 09:44:37
Done and done! I didnít see how to pick my own font. Can someone tell me/can we edit later?


Sent from my iPhone using Tapatalk Pro
Title: Re: E6.5 - 65% custom keyboard
Post by: justjimmeh on Sat, 02 March 2019, 09:48:00
What is the difference between e-white and MAO?
Title: Re: E6.5 - 65% custom keyboard
Post by: leexy on Sat, 02 March 2019, 09:49:31
any prototype pics for mao?
Title: Re: E6.5 - 65% custom keyboard
Post by: _ODIN_ on Sat, 02 March 2019, 09:52:13
Submitted
Title: Re: E6.5 - 65% custom keyboard
Post by: smittysteve on Sat, 02 March 2019, 09:54:02
Boards look stunning, Exclusive. Great job.

Absolutely in for two. Folks, donít snooze on this one. Iíve been along for every Exclusive run and dude does it all right. Get in early and often! I have a hunch spots are going to fill quickly (<24 hours?) for this one.

Canít wait, E. Thanks for bringing another beauty to the community.
Title: Re: E6.5 - 65% custom keyboard
Post by: RETURNISO on Sat, 02 March 2019, 09:54:45
Would it take a ZEAL 65 PCB? :eek:
Title: Re: E6.5 - 65% custom keyboard
Post by: Jinnnxxu on Sat, 02 March 2019, 09:55:16
JiaJia Niubility! Really like this 1 of a kind design with 65%! Especially the blue one! I'm in! :thumb:
Title: Re: E6.5 - 65% custom keyboard
Post by: kakan on Sat, 02 March 2019, 09:55:50
The extra plate option has no option to choose what kind, (like half plate) etc.
Title: Re: E6.5 - 65% custom keyboard
Post by: masterzen on Sat, 02 March 2019, 09:56:19
The PC version looks awesome.

I'm in for it but there are so many options...
I hope we'll be able to edit the form afterward...

For those that chose a specific nameplate text, what did you put on it?
Title: Re: E6.5 - 65% custom keyboard
Post by: Furikurichemy on Sat, 02 March 2019, 09:56:43
Submitted. Accidentally put my font link in the comments section though.. whoops. Hopefully that makes it through or we can edit later. Also is it possible to get our responses emailed to us?
Title: Re: E6.5 - 65% custom keyboard
Post by: bard on Sat, 02 March 2019, 09:57:09
I left my blank :)
Title: Re: E6.5 - 65% custom keyboard
Post by: razor_blade on Sat, 02 March 2019, 09:57:43
So exited!!!!! IN!
Title: Re: E6.5 - 65% custom keyboard
Post by: Darknight00z on Sat, 02 March 2019, 09:58:05
What is the difference between e-white and MAO?

They are both processes to achieve white on alu boards since its impossible to anodize white. I forgot the full names for these, but e-white is a more pure white, while MAO is more grey silvery white. Hope that helps
Title: Re: E6.5 - 65% custom keyboard
Post by: oldcat on Sat, 02 March 2019, 09:59:14
JiaJia Niubility! Really like this 1 of a kind design with 65%! Especially the blue one! I'm in! :thumb:

Big Lao Niubi!
Title: Re: E6.5 - 65% custom keyboard
Post by: donut_sauce on Sat, 02 March 2019, 10:00:17
so torn between polycarb/white and wk with blocker/wkl with blocker. i don't think i've ever seen a 65% wkl with blocker🤔.
Title: Re: E6.5 - 65% custom keyboard
Post by: Starius on Sat, 02 March 2019, 10:00:36
I put in 2 orders without even knowing the cost, haha. 

I was surprised to see that grey was only an option for the case, and not for plate, name tag, weight, etc.
Title: Re: E6.5 - 65% custom keyboard
Post by: metalliccharles on Sat, 02 March 2019, 10:00:51
Looks so good. Submitted :thumb:
Title: Re: E6.5 - 65% custom keyboard
Post by: andrewregal on Sat, 02 March 2019, 10:04:20
Just submitted my order!  ;D
Title: Re: E6.5 - 65% custom keyboard
Post by: smittysteve on Sat, 02 March 2019, 10:04:36
Hi all- helping E here, heís in a rough network area.

For the two weight options, you can choose two colors, a and b. The total for both is the amount shown. $45 total, not $45 each as it looks.

(https://uploads.tapatalk-cdn.com/20190302/1ecdc780a277bd26483c54e28930ac5a.jpg)
Title: Re: E6.5 - 65% custom keyboard
Post by: sanryu on Sat, 02 March 2019, 10:09:07
Hi all- helping E here, heís in a rough network area.

For the two weight options, you can choose two colors, a and b. The total for both is the amount shown. $45 total, not $45 each as it looks.

Show Image
(https://uploads.tapatalk-cdn.com/20190302/1ecdc780a277bd26483c54e28930ac5a.jpg)


he said total 45
Title: Re: E6.5 - 65% custom keyboard
Post by: Woahder on Sat, 02 March 2019, 10:11:25
Submitted!  :D
Title: Re: E6.5 - 65% custom keyboard
Post by: Starius on Sat, 02 March 2019, 10:12:22
What is the difference between e-white and MAO?

I can show you the difference on one of my boards.

The Badge and plate are e-white and the outer case is MAO.

[attachimg=1]
Title: Re: E6.5 - 65% custom keyboard
Post by: ossetepo on Sat, 02 March 2019, 10:12:57
What is the difference between e-white and MAO?

E-white is electrocoated, which is a paint coating method where the object to be coated is dipped in a bath and then has an electric charge applied, attracting the paint.  Used a lot of automotive, tends to give a very even high quality coating over complex shapes.  Think powdercoating but better.  Electrocoated white can be a very true pure white.

MAO is microarc oxidation, which is a electrochemical treatment very similar to anodization, but with much much higher voltages.  This makes a much thicker oxidation layer than standard ano.  You can get close to white with MAO, but not all the way, it tends to look grey-ish.
Title: Re: E6.5 - 65% custom keyboard
Post by: cari on Sat, 02 March 2019, 10:13:50
Hi all- helping E here, heís in a rough network area.

For the two weight options, you can choose two colors, a and b. The total for both is the amount shown. $45 total, not $45 each as it looks.

Show Image
(https://uploads.tapatalk-cdn.com/20190302/1ecdc780a277bd26483c54e28930ac5a.jpg)


So the total would still be $45 if you choose two different colors (one color for A and another color for B)? Because some colors have different value. Just to want to make sure.
Title: Re: E6.5 - 65% custom keyboard
Post by: smittysteve on Sat, 02 March 2019, 10:14:23
Hi all- helping E here, heís in a rough network area.

For the two weight options, you can choose two colors, a and b. The total for both is the amount shown. $45 total, not $45 each as it looks.

Show Image
(https://uploads.tapatalk-cdn.com/20190302/1ecdc780a277bd26483c54e28930ac5a.jpg)


he said total 45

Yes exactly. Iím not sure what it says in there, I filled it out quickly. But he just asked it clarified.

Two choices just mean color can be separate. One price.
Title: Re: E6.5 - 65% custom keyboard
Post by: rossfromfriends on Sat, 02 March 2019, 10:16:12
so pumped. submitted
Title: Re: E6.5 - 65% custom keyboard
Post by: eyedrop on Sat, 02 March 2019, 10:17:25
Hopefully we can edit the order later.  With past exclusive GB, I think you can.

I put in 2 orders and I think I am going to cancel one of them.

PC is so nice but I would hate to see it get scratched.  Decision, decision.

Anyone picked the FE edition?
Title: Re: E6.5 - 65% custom keyboard
Post by: smittysteve on Sat, 02 March 2019, 10:18:45
Hi all- helping E here, heís in a rough network area.

For the two weight options, you can choose two colors, a and b. The total for both is the amount shown. $45 total, not $45 each as it looks.

Show Image
(https://uploads.tapatalk-cdn.com/20190302/1ecdc780a277bd26483c54e28930ac5a.jpg)


So the total would still be $45 if you choose two different colors (one color for A and another color for B)? Because some colors have different value. Just to want to make sure.

Total would be the higher priced weight. A = $45, B = $30 ó-> total = $45
Title: Re: E6.5 - 65% custom keyboard
Post by: wrandobillz on Sat, 02 March 2019, 10:21:21
Submitted! In for 2 (PC & E-WHITE)!
Title: Re: E6.5 - 65% custom keyboard
Post by: Oakelfire on Sat, 02 March 2019, 10:23:01
Same as others - I would love a chance to update the badge font / text.
Title: Re: E6.5 - 65% custom keyboard
Post by: Furikurichemy on Sat, 02 March 2019, 10:29:17
Submitted! In for 2 (PC & E-WHITE)!

Same!  Just couldn't Decide.
Title: Re: E6.5 - 65% custom keyboard
Post by: lightprime on Sat, 02 March 2019, 10:32:44
In for PC :D

The google form should be made editable, as it seems like many people need to make changes
Title: Re: E6.5 - 65% custom keyboard
Post by: nephlock on Sat, 02 March 2019, 10:34:56
Itís my birthday today and I think this will make a fine present :P. Hopefully we can edit the form later... picking a name tag font is gonna take a bit! Iím in!
Title: Re: E6.5 - 65% custom keyboard
Post by: donut_sauce on Sat, 02 March 2019, 10:37:57
in for a poylcard wkl. went in for a gold weight but curious if e-white would look good. what color weights are y'all polycarb folks choosing?
Title: Re: E6.5 - 65% custom keyboard
Post by: MTXjunkie on Sat, 02 March 2019, 10:39:20
in for a poylcard wkl. went in for a gold weight but curious if e-white would look good. what color weights are y'all polycarb folks choosing?

I went e-white all the way around and a second PCB with poly plate.


Sent from my iPhone using Tapatalk Pro
Title: Re: E6.5 - 65% custom keyboard
Post by: smittysteve on Sat, 02 March 2019, 10:40:43
Same as others - I would love a chance to update the badge font / text.

Confirmed- can edit text/ font after submitting. Heíll just do that by PMs.
Title: Re: E6.5 - 65% custom keyboard
Post by: justjimmeh on Sat, 02 March 2019, 10:40:54
Thanks for the help all, went for e-white :)
Title: Re: E6.5 - 65% custom keyboard
Post by: Oakelfire on Sat, 02 March 2019, 10:42:07
Same as others - I would love a chance to update the badge font / text.

Confirmed- can edit text/ font after submitting. Heíll just do that by PMs.

Awesome. I got my second one squared away but need to update the first one.
Title: Re: E6.5 - 65% custom keyboard
Post by: ChrisSwires on Sat, 02 March 2019, 10:42:09
Could someone explain that gasket to me? The board is top mount (?) but the gasket is underneath the plate? So is it top and sandwich or is the gasket not compressed and it's just chilling between the plate and PCB for... Reasons?

Sent from my Pixel 3 using Tapatalk

Title: Re: E6.5 - 65% custom keyboard
Post by: wellbeing44 on Sat, 02 March 2019, 10:46:31
Could someone explain that gasket to me? The board is top mount (?) but the gasket is underneath the plate? So is it top and sandwich or is the gasket not compressed and it's just chilling between the plate and PCB for... Reasons?

Sent from my Pixel 3 using Tapatalk

You're pressing down on the gasket when you type.
Title: Re: E6.5 - 65% custom keyboard
Post by: ChrisSwires on Sat, 02 March 2019, 10:47:19
Could someone explain that gasket to me? The board is top mount (?) but the gasket is underneath the plate? So is it top and sandwich or is the gasket not compressed and it's just chilling between the plate and PCB for... Reasons?

Sent from my Pixel 3 using Tapatalk

You're pressing down on the gasket when you type.
It's top mount, so not really unless you half tighten the screws?

Sent from my Pixel 3 using Tapatalk

Title: Re: E6.5 - 65% custom keyboard
Post by: taropaste on Sat, 02 March 2019, 10:55:39
Could someone explain that gasket to me? The board is top mount (?) but the gasket is underneath the plate? So is it top and sandwich or is the gasket not compressed and it's just chilling between the plate and PCB for... Reasons?

Sent from my Pixel 3 using Tapatalk

You're pressing down on the gasket when you type.
It's top mount, so not really unless you half tighten the screws?

Sent from my Pixel 3 using Tapatalk

He clarified in the IC thread. It can be either normal top mount or gasket mount. He indicated he designed the gakset implementation to be identical to the 356mini.
Title: Re: E6.5 - 65% custom keyboard
Post by: Morgan3Wheeler on Sat, 02 March 2019, 10:55:50
Just submitted my order!!!!!!!!!!!!!!
Title: Re: E6.5 - 65% custom keyboard
Post by: ChrisSwires on Sat, 02 March 2019, 10:58:59
Could someone explain that gasket to me? The board is top mount (?) but the gasket is underneath the plate? So is it top and sandwich or is the gasket not compressed and it's just chilling between the plate and PCB for... Reasons?

Sent from my Pixel 3 using Tapatalk

You're pressing down on the gasket when you type.
It's top mount, so not really unless you half tighten the screws?

Sent from my Pixel 3 using Tapatalk

He clarified in the IC thread. It can be either normal top mount or gasket mount. He indicated he designed the gakset implementation to be identical to the 356mini.
Ok so I guess in order to build it gasket you simply don't use the top mount screws, and the top mount wings serve as the sandwich to compress the gasket against those square standoffs. Or you leave it out and just top mount.

That makes sense, thanks, distinct lack of info on the construction above!

Sent from my Pixel 3 using Tapatalk

Title: Re: E6.5 - 65% custom keyboard
Post by: AgonizedFish on Sat, 02 March 2019, 11:00:56
Just submitted my form! I would love to be able to see the final form to make sure I got everything right, and possibly edit my nametags if I decide to change the ones I've chosen!
Title: Re: E6.5 - 65% custom keyboard
Post by: taropaste on Sat, 02 March 2019, 11:15:03
Hi Exclusive. Can we buy extra gaskets with our order?
Title: Re: E6.5 - 65% custom keyboard
Post by: Sic_Alpha on Sat, 02 March 2019, 11:16:33
Concur with wanting the ability to see final submission to ensure I got everything correct.  Thanks!
Title: Re: E6.5 - 65% custom keyboard
Post by: oldcat on Sat, 02 March 2019, 11:19:05
Just submitted my form! I would love to be able to see the final form to make sure I got everything right, and possibly edit my nametags if I decide to change the ones I've chosen!

Pretty sure it will be posted later
Title: Re: E6.5 - 65% custom keyboard
Post by: excluisve on Sat, 02 March 2019, 11:19:27
just prepare the font links and letters

i will change one by one tomorrow 10:00am (GMT+8) just leave me message will reply when wake up (sorry too later now )

if you want change you orders just fill  again and leave is final

thanks all

Title: Re: E6.5 - 65% custom keyboard
Post by: nickaster1 on Sat, 02 March 2019, 11:27:39
Do normal colors like wathet and dark red feel the same as e white or e black? Dunno if I should go Grey + rose gold or Black + rose gold
Title: Re: E6.5 - 65% custom keyboard
Post by: Oakelfire on Sat, 02 March 2019, 11:31:32
just prepare the font links and letters

i will change one by one tomorrow 10:00am (GMT+8) just leave me message will reply when wake up (sorry too later now )

if you want change you orders just fill  again and leave is final

thanks all



Would love to see an order summary too so we can make sure we got everything correct!

Thanks exclusive!
Title: Re: E6.5 - 65% custom keyboard
Post by: excluisve on Sat, 02 March 2019, 11:42:59
just prepare the font links and letters

i will change one by one tomorrow 10:00am (GMT+8) just leave me message will reply when wake up (sorry too later now )

if you want change you orders just fill  again and leave is final

thanks all



Would love to see an order summary too so we can make sure we got everything correct!

Thanks exclusive!
Sure tomorrow morning I will post spreadsheet then orders can check .
Title: Re: E6.5 - 65% custom keyboard
Post by: tipsyboo on Sat, 02 March 2019, 11:44:15
just prepare the font links and letters

i will change one by one tomorrow 10:00am (GMT+8) just leave me message will reply when wake up (sorry too later now )

if you want change you orders just fill  again and leave is final

thanks all



Would love to see an order summary too so we can make sure we got everything correct!

Thanks exclusive!
same
Title: Re: E6.5 - 65% custom keyboard
Post by: Visionaire on Sat, 02 March 2019, 11:45:51
First PC custom for me!
Title: Re: E6.5 - 65% custom keyboard
Post by: cattharsis on Sat, 02 March 2019, 11:46:07
Can't wait for this to arrive!
Title: Re: E6.5 - 65% custom keyboard
Post by: yur1orlov on Sat, 02 March 2019, 11:50:49
Nice, first PC board for me
Title: Re: E6.5 - 65% custom keyboard
Post by: ContaxS2 on Sat, 02 March 2019, 11:51:06
Submitted for 2, PC and Grey!!!!
Title: Re: E6.5 - 65% custom keyboard
Post by: Sic_Alpha on Sat, 02 March 2019, 11:52:08
Looks like I'll be joining the group wanting to update/modify my order...  Funny how the more I look at the options, the more I want to change it  :p
Title: Re: E6.5 - 65% custom keyboard
Post by: ContaxS2 on Sat, 02 March 2019, 11:58:33
everyone seems to have just blew through the form to get a spot and didnt take time to think about options all that much, cant really blame you guys though this one is awesome
Title: Re: E6.5 - 65% custom keyboard
Post by: donut_sauce on Sat, 02 March 2019, 12:10:50
in for a poylcard wkl. went in for a gold weight but curious if e-white would look good. what color weights are y'all polycarb folks choosing?

I went e-white all the way around and a second PCB with poly plate.


Sent from my iPhone using Tapatalk Pro
All e-white is a good move. any keyset will look awesome on that
Title: Re: E6.5 - 65% custom keyboard
Post by: Aox on Sat, 02 March 2019, 12:13:14
Would like to be able to specify my second plate as half plate, other than that, in for dark red with black!
Title: Re: E6.5 - 65% custom keyboard
Post by: BAS1C on Sat, 02 March 2019, 12:16:19
Hey exclusive, any pics of rose gold on PC?
Title: Re: E6.5 - 65% custom keyboard
Post by: Olitender on Sat, 02 March 2019, 12:18:36
Hopefully, I get an invoice. In for polycarbonate, with brass everything.
Title: Re: E6.5 - 65% custom keyboard
Post by: mrpetrov on Sat, 02 March 2019, 12:22:19
Filled out the form for PC and rose gold brass everything.
Title: Re: E6.5 - 65% custom keyboard
Post by: ProfessorGriswald on Sat, 02 March 2019, 12:30:30
Filled out for a full PC.
Title: Re: E6.5 - 65% custom keyboard
Post by: tunadesu on Sat, 02 March 2019, 12:39:47
Filled out my form this morning! Went with E-White and black badge as well as a wathet and rose gold badge to match different keysets to swap out.
Title: Re: E6.5 - 65% custom keyboard
Post by: roostrc0gburn on Sat, 02 March 2019, 12:48:42
What is the difference between e-white and MAO?

E-white is electrocoated, which is a paint coating method where the object to be coated is dipped in a bath and then has an electric charge applied, attracting the paint.  Used a lot of automotive, tends to give a very even high quality coating over complex shapes.  Think powdercoating but better.  Electrocoated white can be a very true pure white.

MAO is microarc oxidation, which is a electrochemical treatment very similar to anodization, but with much much higher voltages.  This makes a much thicker oxidation layer than standard ano.  You can get close to white with MAO, but not all the way, it tends to look grey-ish.

ok, so e-white is powdercoated. mao is still an anodization process. got it
Title: Re: E6.5 - 65% custom keyboard
Post by: eatRAMEN on Sat, 02 March 2019, 12:49:57
wow there are so many different options, amazing work!!! Wanted a No.1 65 but so tempted to jump on a polycarb WKL 6.5 :)
Title: Re: E6.5 - 65% custom keyboard
Post by: ContaxS2 on Sat, 02 March 2019, 12:58:40
Does this just close after 100 forms are submitted or how does the next step in the process work, this will be my first gb here on geekhack :)
Title: Re: E6.5 - 65% custom keyboard
Post by: bball2 on Sat, 02 March 2019, 13:01:21
Went with PC WKL + Red half plate + Blue/red weight + Extra nameplate  :thumb:
Title: Re: E6.5 - 65% custom keyboard
Post by: LiL_BrOwNiE247 on Sat, 02 March 2019, 13:01:52
In! Excited for my first PC board  :D
Title: Re: E6.5 - 65% custom keyboard
Post by: oldcat on Sat, 02 March 2019, 13:02:44
Went with PC WKL + Red half plate + Blue/red weight + Extra nameplate  :thumb:

I think PC without brass will be too light
Title: Re: E6.5 - 65% custom keyboard
Post by: Kevinah on Sat, 02 March 2019, 13:05:30
In for a PC. Can anybody comment on the sound signature of a Polycarb? I'm looking for a deeper sound in a keyboard (only owned Alu cases) and I heard that Polycarb can provide that? If it helps I went with brass everything else (wanted some heft)
Title: Re: E6.5 - 65% custom keyboard
Post by: donut_sauce on Sat, 02 March 2019, 13:13:57
was there a weight given on the polycarb prototype vs aluminum prototype?
Title: Re: E6.5 - 65% custom keyboard
Post by: Sic_Alpha on Sat, 02 March 2019, 13:14:32
So we just submit another form if we want to change order and put reference to first and ďfinalĒ in comment? Seems like that would affect 100 count
Title: Re: E6.5 - 65% custom keyboard
Post by: Regret on Sat, 02 March 2019, 13:35:47
In for Polycarb!
Title: Re: E6.5 - 65% custom keyboard
Post by: oldcat on Sat, 02 March 2019, 13:55:20
Still kind of feel the polycarb version has too many screws. E-coat looks much better
Title: Re: E6.5 - 65% custom keyboard
Post by: Rob27shred on Sat, 02 March 2019, 13:56:43
Just filled my order out! That polycarb version is super tempting, but I ended up going alum. wkl. I picked dark red top/bottom, brass PVD full plate, white A weight, dark red B weight, with a white name plate that's gonna have my user name on it, & an extra blank nameplate in white. I think this board will be the perfect home for my set of GMK Jamon & that is what I chose my colors around. Gonna wait on the Think6.5 to be my first polycarb board. :thumb:
Title: Re: E6.5 - 65% custom keyboard
Post by: Sic_Alpha on Sat, 02 March 2019, 14:02:08
Submitted a second form to update/modify/replace my first order...
Title: Re: E6.5 - 65% custom keyboard
Post by: Tekniqs on Sat, 02 March 2019, 14:06:10
PC or bust! PC case/plate, brass weight A and e white for weight B...hopefully that comes out well lol.

edit: ahh damn, read the first page and turns out the weight prices is combined as shown. I thought they were separate. sbumitting  a modified order. sorry about that!
Title: Re: E6.5 - 65% custom keyboard
Post by: eyedrop on Sat, 02 March 2019, 14:17:56
So many PC lover around here.   :cool:
Title: Re: E6.5 - 65% custom keyboard
Post by: Tekniqs on Sat, 02 March 2019, 14:19:26
how does this work by the way? Will it end being a 'raffle' type if more than 100 people submitted a form?
Title: Re: E6.5 - 65% custom keyboard
Post by: MatthewPham on Sat, 02 March 2019, 14:22:19
how does this work by the way? Will it end being a 'raffle' type if more than 100 people submitted a form?

fcfs
Title: Re: E6.5 - 65% custom keyboard
Post by: foo4542 on Sat, 02 March 2019, 14:36:57
I'm in. The dark red fits my bill perfectly.
Title: Re: E6.5 - 65% custom keyboard
Post by: Visionaire on Sat, 02 March 2019, 14:37:59
Feels like this is going to be a very PC GB - and a lot of folks are going to get that first PC they've been wanting! Good stuff.
Title: Re: E6.5 - 65% custom keyboard
Post by: Tekniqs on Sat, 02 March 2019, 14:48:25

fcfs

thanks!
Title: Re: E6.5 - 65% custom keyboard
Post by: Auxo on Sat, 02 March 2019, 14:48:47
how does this work by the way? Will it end being a 'raffle' type if more than 100 people submitted a form?


Doubt it, itll likely be FCFS, then anyone else who fills the form after will be queued for a waiting list in case anybody drops out or is unable to pay.
Title: Re: E6.5 - 65% custom keyboard
Post by: Tekniqs on Sat, 02 March 2019, 14:51:37
btw...any one know how thick that PC plate is?
Title: Re: E6.5 - 65% custom keyboard
Post by: Bryan on Sat, 02 March 2019, 14:55:18
This the perfect 65% keyboard I've been looking for! Similar layout to my KBD67, but underglow/case supported!
Title: E6.5 - 65% custom keyboard
Post by: Hokabuki on Sat, 02 March 2019, 15:17:15
Debating on whether I want the right blocker or not. Canít decide which is the better aesthetic. Anyone going with Wingdings font?
Title: Re: E6.5 - 65% custom keyboard
Post by: oh_chesteroni on Sat, 02 March 2019, 15:52:39
ordered :)
Title: Re: E6.5 - 65% custom keyboard
Post by: eyedrop on Sat, 02 March 2019, 16:08:58
What font are you guys choosing?  I want some idea.
Title: Re: E6.5 - 65% custom keyboard
Post by: LiL_BrOwNiE247 on Sat, 02 March 2019, 16:10:39
btw...any one know how thick that PC plate is?

I'd assume 1.5 mm unless specified otherwise.
Title: Re: E6.5 - 65% custom keyboard
Post by: cattharsis on Sat, 02 March 2019, 16:13:50
What font are you guys choosing?  I want some idea.


This is the font im going with: https://www.dafont.com/kiona-2.font

Something simple and clean.
Title: Re: E6.5 - 65% custom keyboard
Post by: Tekniqs on Sat, 02 March 2019, 16:26:52
btw...any one know how thick that PC plate is?

I'd assume 1.5 mm unless specified otherwise.
OOOOF. will have to change plate material if it's 1.5mm pc
Title: Re: E6.5 - 65% custom keyboard
Post by: darryq on Sat, 02 March 2019, 16:28:57
will there be support for a split backspace?
Title: Re: E6.5 - 65% custom keyboard
Post by: Puree on Sat, 02 March 2019, 16:41:25
will there be support for a split backspace?

The supported layouts in the ic : https://i.imgur.com/c51Pa9t.jpg

 :thumb:
Title: Re: E6.5 - 65% custom keyboard
Post by: Chimera on Sat, 02 March 2019, 16:47:25
I submitted earlier today, but am having second thoughts about my plate choice. I want to make sure i'm still one of the first 100. If I want to swap from E-Black plate to PVD Rose Gold and submit a new form will my spot be pushed back, additionally, would it be easier for me to PM you for a minor change or just submit a new form? Also, is there compatibility with any other PCBs?
Title: Re: E6.5 - 65% custom keyboard
Post by: Kevadu on Sat, 02 March 2019, 17:03:22
I am incredibly uncreative and couldn't think of anything to put on the nametag so I just went with the default, but if I do change my mind later would it be possible to change that?
Title: Re: E6.5 - 65% custom keyboard
Post by: Puddsy on Sat, 02 March 2019, 17:09:42
might have to go in just for that dark red

it is beautiful
Title: Re: E6.5 - 65% custom keyboard
Post by: oh_chesteroni on Sat, 02 March 2019, 17:10:56
I submitted earlier today, but am having second thoughts about my plate choice. I want to make sure i'm still one of the first 100. If I want to swap from E-Black plate to PVD Rose Gold and submit a new form will my spot be pushed back, additionally, would it be easier for me to PM you for a minor change or just submit a new form? Also, is there compatibility with any other PCBs?

The E6.5 uses a center port USB C pcb so it's unlikely there is any compatibility with readily available 65% pcbs
Title: Re: E6.5 - 65% custom keyboard
Post by: Chimera on Sat, 02 March 2019, 17:20:18
I submitted earlier today, but am having second thoughts about my plate choice. I want to make sure i'm still one of the first 100. If I want to swap from E-Black plate to PVD Rose Gold and submit a new form will my spot be pushed back, additionally, would it be easier for me to PM you for a minor change or just submit a new form? Also, is there compatibility with any other PCBs?

The E6.5 uses a center port USB C pcb so it's unlikely there is any compatibility with readily available 65% pcbs
Good point then I'm going to keep the backup in my order then.

Still curious about the other question I had

Sent from my ONEPLUS A6003 using Tapatalk

Title: Re: E6.5 - 65% custom keyboard
Post by: vtachkov on Sat, 02 March 2019, 17:25:19
The E6.5 uses a center port USB C pcb so it's unlikely there is any compatibility with readily available 65% pcbs

The zeal65 has a centered USB C, so I wonder if the E6.5 would be compatible with that. That might end up being really nice for the pc case.
Title: Re: E6.5 - 65% custom keyboard
Post by: Ephemeral on Sat, 02 March 2019, 17:26:39
Psyched. In for one.
Title: Re: E6.5 - 65% custom keyboard
Post by: tipsyboo on Sat, 02 March 2019, 17:40:04
I have a feeling I'm the only one going for winkey_no_blockers  :))
Title: Re: E6.5 - 65% custom keyboard
Post by: excluisve on Sat, 02 March 2019, 17:56:41
Hi guys, just wake up i will post spreadsheet and reply one by one

thanks  .
Title: Re: E6.5 - 65% custom keyboard
Post by: excluisve on Sat, 02 March 2019, 18:05:59
Due to much people fill the form i will close it at  8:00pm (EST)

thanks everyone
Title: Re: E6.5 - 65% custom keyboard
Post by: JubJubCity on Sat, 02 March 2019, 18:08:05
In for a PC can't wait
Title: Re: E6.5 - 65% custom keyboard
Post by: Sic_Alpha on Sat, 02 March 2019, 18:10:34
Due to much people fill the form i will close it at  8:00pm (EST)

thanks everyone


Popular!  I submitted a second to update/modify/replace my first order.  Understood that this is how you wanted us to update; just saying because it probably inflated the count a bit with others doing the same.
Title: Re: E6.5 - 65% custom keyboard
Post by: oldcat on Sat, 02 March 2019, 18:57:52
Due to much people fill the form i will close it at  8:00pm (EST)

thanks everyone


Congrats! I really love those e-coat ones.
Title: Re: E6.5 - 65% custom keyboard
Post by: soveryscary on Sat, 02 March 2019, 19:05:13
Is there any way to edit my form? I submitted it too early, meant to hit back.
Title: Re: E6.5 - 65% custom keyboard
Post by: Tekniqs on Sat, 02 March 2019, 19:05:37
Due to much people fill the form i will close it at  8:00pm (EST)

thanks everyone


Popular!  I submitted a second to update/modify/replace my first order.  Understood that this is how you wanted us to update; just saying because it probably inflated the count a bit with others doing the same.

same...i had to submit a second form to modify the original form.
Title: Re: E6.5 - 65% custom keyboard
Post by: MTXjunkie on Sat, 02 March 2019, 19:09:56
Iím sad I didnít see the closing and Iím happy I didnít see the closing. I probably would have put in a second order if I would have gotten in under the deadline


Sent from my iPhone using Tapatalk Pro
Title: Re: E6.5 - 65% custom keyboard
Post by: Oakelfire on Sat, 02 March 2019, 19:19:41
Absolutely in for two. Folks, donít snooze on this one. Iíve been along for every Exclusive run and dude does it all right. Get in early and often! I have a hunch spots are going to fill quickly (<24 hours?) for this one.

We didn't even make it 12 hours! ;D

Lots of people picking up 2 as well - probably hit the limit real quick!
Title: Re: E6.5 - 65% custom keyboard
Post by: JubJubCity on Sat, 02 March 2019, 19:27:38
Absolutely in for two. Folks, donít snooze on this one. Iíve been along for every Exclusive run and dude does it all right. Get in early and often! I have a hunch spots are going to fill quickly (<24 hours?) for this one.

We didn't even make it 12 hours! ;D

Lots of people picking up 2 as well - probably hit the limit real quick!
Hoping I made it in time!!
Title: Re: E6.5 - 65% custom keyboard
Post by: click clack jack on Sat, 02 March 2019, 19:49:00
I ordered red for a Jamon build. PC plate. Black name badge for pata negra. And sandblast A weight with black B weight  ;D
Title: Re: E6.5 - 65% custom keyboard
Post by: nickaster1 on Sat, 02 March 2019, 19:51:00
I just went with E white and rose gold badge/weight. Actually have second thought about changing to Grey or MAO so it doesnít overshadow my Tulip set
Title: Re: E6.5 - 65% custom keyboard
Post by: foo4542 on Sat, 02 March 2019, 20:33:16
Due to much people fill the form i will close it at  8:00pm (EST)

thanks everyone


Lucky all of a sudden I woke up in the middle of the night and submitted an entry.
Title: Re: E6.5 - 65% custom keyboard
Post by: excluisve on Sat, 02 March 2019, 20:47:37
I am sort the spreadsheet cancel the repeat one

plz be patient wait me to post when done

:)
Title: Re: E6.5 - 65% custom keyboard
Post by: nickaster1 on Sat, 02 March 2019, 21:03:59
Yeah I also made second form on top of the first one since I couldnít decide
Title: Re: E6.5 - 65% custom keyboard
Post by: Oakelfire on Sat, 02 March 2019, 21:08:38
I am sort the spreadsheet cancel the repeat one

plz be patient wait me to post when done

:)


If you have any questions - send me a PM! I ordered 2 boards - don't want to have one canceled. :)
Title: Re: E6.5 - 65% custom keyboard
Post by: geistmate on Sat, 02 March 2019, 21:09:53
Where are those pink keycaps from?
Title: Re: E6.5 - 65% custom keyboard
Post by: Rob27shred on Sat, 02 March 2019, 21:13:51
Due to much people fill the form i will close it at  8:00pm (EST)

thanks everyone


Wow, that went super quick, congrats man! Glad I didn't wait to fill the form out, here I thought I was all super early since the GB was stated to run till the 9th. :)) Now I got my fingers crossed I actually got in before 100 orders were submitted & I can get one! :blank:
Title: Re: E6.5 - 65% custom keyboard
Post by: wt5now on Sat, 02 March 2019, 21:15:30
See the PM plz.
Title: Re: E6.5 - 65% custom keyboard
Post by: nickaster1 on Sat, 02 March 2019, 21:19:00
Due to much people fill the form i will close it at  8:00pm (EST)

thanks everyone


Wow, that went super quick, congrats man! Glad I didn't wait to fill the form out, here I thought I was all super early since the GB was stated to run till the 9th. :)) Now I got my fingers crossed I actually got in before 100 orders were submitted & I can get one! :blank:
I think this GB is among one of the faster ones that heís done over time. E7 didnít all fly out like this if I remember correctly
Title: Re: E6.5 - 65% custom keyboard
Post by: Starius on Sat, 02 March 2019, 21:30:01
I am sort the spreadsheet cancel the repeat one

plz be patient wait me to post when done

:)


If you have any questions - send me a PM! I ordered 2 boards - don't want to have one canceled. :)

I am in the same situation. 
Due to how exclusive and desirable these boards are, I would feel lucky to get just one. 
But I've tried for a 2nd board as a gift for someone who has had rotten luck with keyboards for years and has never known the high end customizable keyboard community existed until just recently.  I thought this might be the key for him to step into a whole new world...  ;)
Title: Re: E6.5 - 65% custom keyboard
Post by: eyedrop on Sat, 02 March 2019, 21:45:42

I am in the same situation. 
Due to how exclusive and desirable these boards are, I would feel lucky to get just one. 
But I've tried for a 2nd board as a gift for someone who has had rotten luck with keyboards for years and has never known the high end customizable keyboard community existed until just recently.  I thought this might be the key for him to step into a whole new world...  ;)

You're a good friend, hope you will get the second order.
Title: Re: E6.5 - 65% custom keyboard
Post by: vtachkov on Sat, 02 March 2019, 21:50:32
I'm in for two as well. Couldn't keep my hands off em. Love that e-white and RGB polycarbonate.
Title: Re: E6.5 - 65% custom keyboard
Post by: oldcat on Sat, 02 March 2019, 21:59:06
I just went with E white and rose gold badge/weight. Actually have second thought about changing to Grey or MAO so it doesnít overshadow my Tulip set

Good choice!
Title: Re: E6.5 - 65% custom keyboard
Post by: excluisve on Sat, 02 March 2019, 22:03:24
Orders check

https://docs.google.com/spreadsheets/d/1IwRaVVonheMmkqS1j02I3lflphKK55sutiRbX7XznwE/edit?

usp=sharing (https://docs.google.com/spreadsheets/d/1IwRaVVonheMmkqS1j02I3lflphKK55sutiRbX7XznwE/edit?

usp=sharing)


I havent edit the spreadsheet just cancel the repeat one ,i will check each message and edit it



There have been almost 300 forms submitted. Several are likely duplicates, but we have far exceeded the 100 I intended. I am honor all who are in. Your support is awesome and I donít want anyone who has submitted to miss out. This means the later orders may be slightly behind the others in shipping, but I will fulfill all orders.




thanks everyone who submitted! :thumb:
Title: Re: E6.5 - 65% custom keyboard
Post by: JubJubCity on Sat, 02 March 2019, 22:06:11
Orders check

https://docs.google.com/spreadsheets/d/1IwRaVVonheMmkqS1j02I3lflphKK55sutiRbX7XznwE/edit?

usp=sharing (https://docs.google.com/spreadsheets/d/1IwRaVVonheMmkqS1j02I3lflphKK55sutiRbX7XznwE/edit?

usp=sharing)


I havent edit the spreadsheet just cancel the repeat one ,i will check each message and edit it



There have been almost 300 forms submitted. Several are likely duplicates, but we have far exceeded the 100 I intended. I am honor all who are in. Your support is awesome and I donít want anyone who has submitted to miss out. This means the later orders may be slightly behind the others in shipping, but I will fulfill all orders.




thanks everyone who submitted! :thumb:

You are amazing, thank you for honoring all who have submitted. I can't wait to pay!!!! :thumb:
Title: Re: E6.5 - 65% custom keyboard
Post by: Oakelfire on Sat, 02 March 2019, 22:09:46
Orders check

https://docs.google.com/spreadsheets/d/1IwRaVVonheMmkqS1j02I3lflphKK55sutiRbX7XznwE/edit?

usp=sharing (https://docs.google.com/spreadsheets/d/1IwRaVVonheMmkqS1j02I3lflphKK55sutiRbX7XznwE/edit?

usp=sharing)


I havent edit the spreadsheet just cancel the repeat one ,i will check each message and edit it



There have been almost 300 forms submitted. Several are likely duplicates, but we have far exceeded the 100 I intended. I am honor all who are in. Your support is awesome and I donít want anyone who has submitted to miss out. This means the later orders may be slightly behind the others in shipping, but I will fulfill all orders.




thanks everyone who submitted! :thumb:


Awesome, thanks excluisve!
Title: Re: E6.5 - 65% custom keyboard
Post by: kconfire on Sat, 02 March 2019, 22:11:17
Orders check

https://docs.google.com/spreadsheets/d/1IwRaVVonheMmkqS1j02I3lflphKK55sutiRbX7XznwE/edit?

usp=sharing (https://docs.google.com/spreadsheets/d/1IwRaVVonheMmkqS1j02I3lflphKK55sutiRbX7XznwE/edit?

usp=sharing)


I havent edit the spreadsheet just cancel the repeat one ,i will check each message and edit it



There have been almost 300 forms submitted. Several are likely duplicates, but we have far exceeded the 100 I intended. I am honor all who are in. Your support is awesome and I don’t want anyone who has submitted to miss out. This means the later orders may be slightly behind the others in shipping, but I will fulfill all orders.




thanks everyone who submitted! :thumb:


That is sweet!!
Will we know who's gotten into the Founder's Edition, too? Or was that also FCFS? :)
Title: Re: E6.5 - 65% custom keyboard
Post by: Furikurichemy on Sat, 02 March 2019, 22:12:22
made a mistake. Ignore this sorry.
Title: Re: E6.5 - 65% custom keyboard
Post by: razor_blade on Sat, 02 March 2019, 22:23:55
Awesome! Can't wait for my second Exclusive board!
Title: Re: E6.5 - 65% custom keyboard
Post by: click clack jack on Sat, 02 March 2019, 22:25:27
I am so excited!!
Title: Re: E6.5 - 65% custom keyboard
Post by: excluisve on Sat, 02 March 2019, 22:33:35
next time if limited is wont change
please be prepared


thanks ,now is hard decision for me
Title: Re: E6.5 - 65% custom keyboard
Post by: Auxo on Sat, 02 March 2019, 22:39:37
next time if limited is wont change
please be prepared


thanks ,now is hard decision for me

You're doing great man, don't sweat it.
Title: Re: E6.5 - 65% custom keyboard
Post by: leexy on Sat, 02 March 2019, 22:43:14
Due to much people fill the form i will close it at  8:00pm (EST)

thanks everyone


Congrats! I really love those e-coat ones.

oldcat join anot
Title: Re: E6.5 - 65% custom keyboard
Post by: Sic_Alpha on Sat, 02 March 2019, 22:45:19
Orders check

https://docs.google.com/spreadsheets/d/1IwRaVVonheMmkqS1j02I3lflphKK55sutiRbX7XznwE/edit?

usp=sharing (https://docs.google.com/spreadsheets/d/1IwRaVVonheMmkqS1j02I3lflphKK55sutiRbX7XznwE/edit?

usp=sharing)


I havent edit the spreadsheet just cancel the repeat one ,i will check each message and edit it



There have been almost 300 forms submitted. Several are likely duplicates, but we have far exceeded the 100 I intended. I am honor all who are in. Your support is awesome and I donít want anyone who has submitted to miss out. This means the later orders may be slightly behind the others in shipping, but I will fulfill all orders.




thanks everyone who submitted! :thumb:


If we put in a second form to modify our first order, was our placement according to the second or first form?  Just curious as it doesn't matter now.  I put my first order in fairly quick after the GB started and I'm #142; spots went super fast!  Thank you so much for allowing everyone who got an order placed the opportunity to purchase!  Very awesome of you!!! :cool: :thumb:
Title: Re: E6.5 - 65% custom keyboard
Post by: oldcat on Sat, 02 March 2019, 22:47:16
Due to much people fill the form i will close it at  8:00pm (EST)

thanks everyone


Congrats! I really love those e-coat ones.

oldcat join anot

I was planning to join China GB, which was cheaper but limited to only 30 sets I think. I was not able to get one, gone too fast. 5AM MST was the GB start time.

Also, I was more focused on my own Polycarb 65% design these days, I guess I need to focus on making my own design perfect (lots of time and monetary investment involved), and will probably need to sit out most keyboard GBs for a while.
Title: Re: E6.5 - 65% custom keyboard
Post by: Tekniqs on Sat, 02 March 2019, 22:55:09
holy hell. I thought I got in early but I'm #221 on the list. you guys were up early! lol
Title: Re: E6.5 - 65% custom keyboard
Post by: bball2 on Sat, 02 March 2019, 22:59:16
Sweet thanks exclusive, glad I jumped in on this!
Title: Re: E6.5 - 65% custom keyboard
Post by: eyedrop on Sat, 02 March 2019, 23:39:39
Wow, that's a pleasant surprise.  Very nice of you to fulfill all orders, exclusive.

So who got into the Founder's Edition?
Title: Re: E6.5 - 65% custom keyboard
Post by: Bawbletea on Sat, 02 March 2019, 23:55:53
I can't wait!! super excited for my first polycarb keyboard! :D
Title: Re: E6.5 - 65% custom keyboard
Post by: oldcat on Sun, 03 March 2019, 00:00:22
Orders check

https://docs.google.com/spreadsheets/d/1IwRaVVonheMmkqS1j02I3lflphKK55sutiRbX7XznwE/edit?

usp=sharing (https://docs.google.com/spreadsheets/d/1IwRaVVonheMmkqS1j02I3lflphKK55sutiRbX7XznwE/edit?

usp=sharing)


I havent edit the spreadsheet just cancel the repeat one ,i will check each message and edit it



There have been almost 300 forms submitted. Several are likely duplicates, but we have far exceeded the 100 I intended. I am honor all who are in. Your support is awesome and I donít want anyone who has submitted to miss out. This means the later orders may be slightly behind the others in shipping, but I will fulfill all orders.




thanks everyone who submitted! :thumb:


That is sweet!!
Will we know who's gotten into the Founder's Edition, too? Or was that also FCFS? :)

con in qq? haha
Title: Re: E6.5 - 65% custom keyboard
Post by: CrimsonPelicon on Sun, 03 March 2019, 00:18:34
Saw this post early in the morning. Completely forgot that it was limited number of boards so I thought I could take some time to think about what text/font I wanted on my nameplate. What a bad, bad decision but regardless, if anyone's having second thoughts or don't need two E6.5s, please let me know!
Title: Re: E6.5 - 65% custom keyboard
Post by: excluisve on Sun, 03 March 2019, 00:36:36
All pm request edit orders is done

plz check if anyone need edit it let me know ,tell me what is the number you are in thanks


Title: Re: E6.5 - 65% custom keyboard
Post by: danielucf on Sun, 03 March 2019, 00:43:08
A LOT more people ordered this than I thought. Guess it'll be aftermarket for me :(
Title: Re: E6.5 - 65% custom keyboard
Post by: swangful on Sun, 03 March 2019, 00:45:44
thank you!  :thumb:
Title: Re: E6.5 - 65% custom keyboard
Post by: cldskt on Sun, 03 March 2019, 00:54:38
All pm request edit orders is done

plz check if anyone need edit it let me know ,tell me what is the number you are in thanks


PMed you on Discord ;)
Title: Re: E6.5 - 65% custom keyboard
Post by: Visionaire on Sun, 03 March 2019, 01:16:34
Played with that spreadsheet a bit. Made a pricing matrix and pulled a quick summary of the data together.

(https://i.imgur.com/eKKdL2p.jpg)

https://docs.google.com/spreadsheets/d/1uJOwtzmGfFzTdSc0OGRe8hKIkV9-q-J3AMS9GrCXhBI/edit?usp=sharing

Title: Re: E6.5 - 65% custom keyboard
Post by: nickaster1 on Sun, 03 March 2019, 01:16:44
All pm request edit orders is done

plz check if anyone need edit it let me know ,tell me what is the number you are in thanks

Pm sent
Title: Re: E6.5 - 65% custom keyboard
Post by: nulltorious on Sun, 03 March 2019, 01:30:04
Played with that spreadsheet a bit. Made a pricing matrix and pulled a quick summary of the data together.

Show Image
(https://i.imgur.com/eKKdL2p.jpg)


https://docs.google.com/spreadsheets/d/1uJOwtzmGfFzTdSc0OGRe8hKIkV9-q-J3AMS9GrCXhBI/edit?usp=sharing

Really cool to see the data visualizations!
Title: Re: E6.5 - 65% custom keyboard
Post by: excluisve on Sun, 03 March 2019, 01:30:23
Please before edit orders thinks twice ,it may get easy to my work

thanks .
Title: Re: E6.5 - 65% custom keyboard
Post by: oldcat on Sun, 03 March 2019, 01:51:36
Played with that spreadsheet a bit. Made a pricing matrix and pulled a quick summary of the data together.

Show Image
(https://i.imgur.com/eKKdL2p.jpg)


https://docs.google.com/spreadsheets/d/1uJOwtzmGfFzTdSc0OGRe8hKIkV9-q-J3AMS9GrCXhBI/edit?usp=sharing

Wow! Nice analytics
Title: Re: E6.5 - 65% custom keyboard(Orders check )
Post by: ContaxS2 on Sun, 03 March 2019, 01:52:22
edit pm sent for spot 165 and 167 so hype for these, thank you for everything exclusive!!!!
Title: Re: E6.5 - 65% custom keyboard(Orders check )
Post by: foxmancore on Sun, 03 March 2019, 01:57:21
how about full brass version?
Title: Re: E6.5 - 65% custom keyboard(Orders check )
Post by: excluisve on Sun, 03 March 2019, 02:14:30
how about full brass version?
FE will post later .
Title: Re: E6.5 - 65% custom keyboard(Orders check )
Post by: Olitender on Sun, 03 March 2019, 02:54:52
Played with that spreadsheet a bit. Made a pricing matrix and pulled a quick summary of the data together.

Show Image
(https://i.imgur.com/eKKdL2p.jpg)


https://docs.google.com/spreadsheets/d/1uJOwtzmGfFzTdSc0OGRe8hKIkV9-q-J3AMS9GrCXhBI/edit?usp=sharing



I think you added the cost of both A and B as separate costs to the boards. It should just be one additional cost instead of two.
Title: Re: E6.5 - 65% custom keyboard(Orders check )
Post by: Chimera on Sun, 03 March 2019, 03:12:05
When is the deadline to submit changes? I want to make 100% sure of my change before sending a pm to avoid confusion

Sent from my ONEPLUS A6003 using Tapatalk

Title: Re: E6.5 - 65% custom keyboard(Orders check )
Post by: wellbeing44 on Sun, 03 March 2019, 03:31:51
Glad I could get my edit in, hope the rest of the process goes smoothly for Exclusive  :thumb:
Title: Re: E6.5 - 65% custom keyboard(Orders check )
Post by: excluisve on Sun, 03 March 2019, 03:36:11
When is the deadline to submit changes? I want to make 100% sure of my change before sending a pm to avoid confusion

Sent from my ONEPLUS A6003 using Tapatalk
As soon as possible
Title: Re: E6.5 - 65% custom keyboard(Orders check )
Post by: wrandobillz on Sun, 03 March 2019, 04:56:39
PM for order edits. Thanks Exclusive! Super excited about this board!
Title: Re: E6.5 - 65% custom keyboard(Orders check )
Post by: HAYAN on Sun, 03 March 2019, 04:59:13
If i choose both weight brass rose gold then it will be +$90?
Title: Re: E6.5 - 65% custom keyboard(Orders check )
Post by: nickaster1 on Sun, 03 March 2019, 05:22:26
If i choose both weight brass rose gold then it will be +$90?
No the price would be the most expensive option among the two you chose
Title: Re: E6.5 - 65% custom keyboard(Orders check )
Post by: excluisve on Sun, 03 March 2019, 06:25:01
FE orders check https://docs.google.com/spreadsheets/d/1qLAKZjMyLVXApSWO4BCG7vYOE_oUSW3NBWJVr6qNuO4/edit?usp=sharing (https://docs.google.com/spreadsheets/d/1qLAKZjMyLVXApSWO4BCG7vYOE_oUSW3NBWJVr6qNuO4/edit?usp=sharing)

limited to 10
Title: Re: E6.5 - 65% custom keyboard(Orders check )
Post by: KeepCalm27 on Sun, 03 March 2019, 06:33:29
e6.5 PC version + gmk Bento!
can't wait to see my new keyboard and keycaps.
Title: Re: E6.5 - 65% custom keyboard(Orders check )
Post by: Darknight00z on Sun, 03 March 2019, 07:15:27
FE orders check https://docs.google.com/spreadsheets/d/1qLAKZjMyLVXApSWO4BCG7vYOE_oUSW3NBWJVr6qNuO4/edit?usp=sharing (https://docs.google.com/spreadsheets/d/1qLAKZjMyLVXApSWO4BCG7vYOE_oUSW3NBWJVr6qNuO4/edit?usp=sharing)

limited to 10


oof solidcactus you just made in bud!  :p
Title: Re: E6.5 - 65% custom keyboard(Orders check )
Post by: SolidCactus on Sun, 03 March 2019, 07:18:15
FE orders check https://docs.google.com/spreadsheets/d/1qLAKZjMyLVXApSWO4BCG7vYOE_oUSW3NBWJVr6qNuO4/edit?usp=sharing (https://docs.google.com/spreadsheets/d/1qLAKZjMyLVXApSWO4BCG7vYOE_oUSW3NBWJVr6qNuO4/edit?usp=sharing)

limited to 10


oof solidcactus you just made in bud!  :p

Yeah crazy eh?! I couldn't believe it so had to ping Exclusive to confirm I made it  ;D
Title: Re: E6.5 - 65% custom keyboard(Orders check )
Post by: Visionaire on Sun, 03 March 2019, 07:23:01
If i choose both weight brass rose gold then it will be +$90?
No the price would be the most expensive option among the two you chose

Wait, I didn't see that stated. Lines just said price on A and B?
Title: Re: E6.5 - 65% custom keyboard
Post by: excluisve on Sun, 03 March 2019, 07:55:13
Hi all- helping E here, he’s in a rough network area.

For the two weight options, you can choose two colors, a and b. The total for both is the amount shown. $45 total, not $45 each as it looks.

Show Image
(https://uploads.tapatalk-cdn.com/20190302/1ecdc780a277bd26483c54e28930ac5a.jpg)


Two choices just mean color can be separate. One price.

Total would be the higher priced weight. A = $45, B = $30 —-> total = $45
Title: Re: E6.5 - 65% custom keyboard
Post by: Visionaire on Sun, 03 March 2019, 08:04:16
Hi all- helping E here, heís in a rough network area.

For the two weight options, you can choose two colors, a and b. The total for both is the amount shown. $45 total, not $45 each as it looks.

Show Image
(https://uploads.tapatalk-cdn.com/20190302/1ecdc780a277bd26483c54e28930ac5a.jpg)


Two choices just mean color can be separate. One price.

Total would be the higher priced weight. A = $45, B = $30 ó-> total = $45
[/font][/size]

Gotcha. That means I did miscalculate the pricing. New stats updated here. Note: if changes were given to Exclusive after midnight on 3/3, they're not reflected here yet. Also, I'm not affiliated with the buy, just curious to see the current trends of what people bought!

(https://imgur.com/FSMyZPs.jpg)

Title: Re: E6.5 - 65% custom keyboard(Orders check )
Post by: eyedrop on Sun, 03 March 2019, 08:14:19
Excited to have my first exclusive FE board.

If we order more than 1, will shipping be combined and slightly cheaper?
Title: Re: E6.5 - 65% custom keyboard(Orders check )
Post by: donut_sauce on Sun, 03 March 2019, 08:23:02
Exclusive, can you tell us what the weight of the polycarb proto is with and without the brass plate?

I'm trying to decide on whether or not a polycarb plate (my much preferred plate type) will make the polycarb version to light.
Title: Re: E6.5 - 65% custom keyboard(Orders check )
Post by: excluisve on Sun, 03 March 2019, 08:48:18
Excited to have my first exclusive FE board.

If we order more than 1, will shipping be combined and slightly cheaper?
A little depens on dhl .
Title: Re: E6.5 - 65% custom keyboard(Orders check )
Post by: excluisve on Sun, 03 March 2019, 08:49:29
Exclusive, can you tell us what the weight of the polycarb proto is with and without the brass plate?

I'm trying to decide on whether or not a polycarb plate (my much preferred plate type) will make the polycarb version to light.
yea would suggest pc case with brass or alu
pc is light
Title: Re: E6.5 - 65% custom keyboard(Orders check )
Post by: elmo on Sun, 03 March 2019, 09:28:18
Stoked for this board.
Will look really great   :D
Title: Re: E6.5 - 65% custom keyboard(Orders check )
Post by: excluisve on Sun, 03 March 2019, 09:41:56
please check orders .

4th March is latest date to make final changes,nameplate font and letters not in hurry just make the  other parts is correct
Title: Re: E6.5 - 65% custom keyboard(Orders check deadline 4th March)
Post by: vtachkov on Sun, 03 March 2019, 10:10:33
Will the sandblasted brass be coated with anything, or will it be raw?
Title: Re: E6.5 - 65% custom keyboard(Orders check deadline 4th March)
Post by: ossetepo on Sun, 03 March 2019, 10:19:42
Thanks Exclusive, I'm super excited about this buy!
Title: Re: E6.5 - 65% custom keyboard(Orders check deadline 4th March)
Post by: Aox on Sun, 03 March 2019, 10:20:58
Can we specify a half plate for our second plate if we've ordered a full first plate?
Title: Re: E6.5 - 65% custom keyboard(Orders check deadline 4th March)
Post by: mrpetrov on Sun, 03 March 2019, 10:32:08
If I want to add the extra PCB to my order, how do I do that? The original google form can't be loaded and the order check form isn't editable. This is for me, order #111. Thanks!
Title: Re: E6.5 - 65% custom keyboard(Orders check )
Post by: mankikami on Sun, 03 March 2019, 10:47:36
FE orders check https://docs.google.com/spreadsheets/d/1qLAKZjMyLVXApSWO4BCG7vYOE_oUSW3NBWJVr6qNuO4/edit?usp=sharing (https://docs.google.com/spreadsheets/d/1qLAKZjMyLVXApSWO4BCG7vYOE_oUSW3NBWJVr6qNuO4/edit?usp=sharing)

limited to 10


Pls take all orders in the spreadsheet like what you did with the normal version  :( :( :(
Title: Re: E6.5 - 65% custom keyboard(Orders check deadline 4th March)
Post by: excluisve on Sun, 03 March 2019, 10:52:12
Will the sandblasted brass be coated with anything, or will it be raw?
sandblasted is same like  E7

Title: Re: E6.5 - 65% custom keyboard(Orders check deadline 4th March)
Post by: excluisve on Sun, 03 March 2019, 10:52:31
Can we specify a half plate for our second plate if we've ordered a full first plate?
oh maybe not
Title: Re: E6.5 - 65% custom keyboard(Orders check deadline 4th March)
Post by: excluisve on Sun, 03 March 2019, 10:53:37
If I want to add the extra PCB to my order, how do I do that? The original google form can't be loaded and the order check form isn't editable. This is for me, order #111. Thanks!
PM me what you want change i will do it
Title: Re: E6.5 - 65% custom keyboard(Orders check )
Post by: donut_sauce on Sun, 03 March 2019, 11:10:59
Exclusive, can you tell us what the weight of the polycarb proto is with and without the brass plate?

I'm trying to decide on whether or not a polycarb plate (my much preferred plate type) will make the polycarb version to light.
yea would suggest pc case with brass or alu
pc is light
I see, thanks for the suggestion. Do you have a weight measurement for the polycarbonate version?
Title: Re: E6.5 - 65% custom keyboard(Orders check )
Post by: oldcat on Sun, 03 March 2019, 11:12:51
Exclusive, can you tell us what the weight of the polycarb proto is with and without the brass plate?

I'm trying to decide on whether or not a polycarb plate (my much preferred plate type) will make the polycarb version to light.
yea would suggest pc case with brass or alu
pc is light
I see, thanks for the suggestion. Do you have a weight measurement for the polycarbonate version?

It's going to be super light just with PC. I have a full PC case. You really need the brass to increase the weight a bit
Title: Re: E6.5 - 65% custom keyboard(Orders check deadline 4th March)
Post by: excluisve on Sun, 03 March 2019, 11:15:35
All message will reply tomorrow (just leave message )
Title: Re: E6.5 - 65% custom keyboard(Orders check deadline 4th March)
Post by: tonny950111 on Sun, 03 March 2019, 11:53:37
Already in !  :D
Title: Re: E6.5 - 65% custom keyboard(Orders check )
Post by: donut_sauce on Sun, 03 March 2019, 12:22:10
It's going to be super light just with PC. I have a full PC case. You really need the brass to increase the weight a bit
i know the tgr910 with a poly plate is over 4lbs which for me is plenty heavy. I'm curious how light this one will be considering the weight is smaller than the 910 weight. I think if it's at least 2.5lbs I'd still go poly.
Title: Re: E6.5 - 65% custom keyboard(Orders check deadline 4th March)
Post by: BAS1C on Sun, 03 March 2019, 13:32:45
Hmmm I wonder if there would be any chance at a PC Weight B part?
Title: Re: E6.5 - 65% custom keyboard(Orders check deadline 4th March)
Post by: kconfire on Sun, 03 March 2019, 13:44:03
Was driving when the E6.5 opened up and I was too late for FE E6.5...
:rip:
Title: Re: E6.5 - 65% custom keyboard(Orders check deadline 4th March)
Post by: Lisinge on Sun, 03 March 2019, 14:14:58
I've been thinking about this before, but i'm sure more edumacated people have already thonked about this.
But is there any chance of the rubber gasket drying out? Is it made of rubber or silicon?
Title: Re: E6.5 - 65% custom keyboard(Orders check deadline 4th March)
Post by: neojonathan on Sun, 03 March 2019, 15:33:43
Hmmm I wonder if there would be any chance at a PC Weight B part?

Same !!! I think having this might create cool combinations : )
Title: Re: E6.5 - 65% custom keyboard(Orders check deadline 4th March)
Post by: taropaste on Sun, 03 March 2019, 15:46:39
Hmmm I wonder if there would be any chance at a PC Weight B part?

Same !!! I think having this might create cool combinations : )

I think considering how many orders there are in the GB, let's help Exclusive by not trying to create even more options. There are already tons of options as is. Not only would it benefit him but it would be best for all of us if we keep things as straightforward as possible to ensure the GB goes as smoothly as possible.  :thumb:
Title: Re: E6.5 - 65% custom keyboard(Orders check deadline 4th March)
Post by: Olitender on Sun, 03 March 2019, 15:53:43
Hmmm I wonder if there would be any chance at a PC Weight B part?

Same !!! I think having this might create cool combinations : )

I think considering how many orders there are in the GB, let's help Exclusive by not trying to create even more options. There are already tons of options as is. Not only would it benefit him but it would be best for all of us if we keep things as straightforward as possible to ensure the GB goes as smoothly as possible.  :thumb:
As cool as a polycarbonate weight would be. I also think adding too many different options complicates things and makes things easier to mess up. Would be pretty sick to have a polycarb B weight tho lol.
Title: Re: E6.5 - 65% custom keyboard(Orders check deadline 4th March)
Post by: oldcat on Sun, 03 March 2019, 16:11:27
Hmmm I wonder if there would be any chance at a PC Weight B part?

Unless you want to have a ultra light board :)
Title: Re: E6.5 - 65% custom keyboard
Post by: cattharsis on Sun, 03 March 2019, 17:43:21
Hi all- helping E here, heís in a rough network area.

For the two weight options, you can choose two colors, a and b. The total for both is the amount shown. $45 total, not $45 each as it looks.

Show Image
(https://uploads.tapatalk-cdn.com/20190302/1ecdc780a277bd26483c54e28930ac5a.jpg)


Two choices just mean color can be separate. One price.

Total would be the higher priced weight. A = $45, B = $30 ó-> total = $45
[/font][/size]

Gotcha. That means I did miscalculate the pricing. New stats updated here. Note: if changes were given to Exclusive after midnight on 3/3, they're not reflected here yet. Also, I'm not affiliated with the buy, just curious to see the current trends of what people bought!

Show Image
(https://imgur.com/FSMyZPs.jpg)


Would be cool to see the break down of how many people got PC vs other colours!
Title: Re: E6.5 - 65% custom keyboard(Orders check deadline 4th March)
Post by: excluisve on Sun, 03 March 2019, 20:14:26
All pm already reply

if you not get reply pm me  again .

also check you orders in time ,invoice will send after dealine
Title: Re: E6.5 - 65% custom keyboard(Orders check deadline 4th March)
Post by: oh_chesteroni on Sun, 03 March 2019, 20:40:00
Just sent you a pm Exclusive. Thank you.
Title: Re: E6.5 - 65% custom keyboard(Orders check deadline 4th March)
Post by: eyedrop on Sun, 03 March 2019, 20:56:47
Send you a PM about order change as well, exclusive.  Thank you.
Title: Re: E6.5 - 65% custom keyboard(Orders check deadline 4th March)
Post by: MTXjunkie on Sun, 03 March 2019, 21:04:56
PM sent.  I just want to update my font.  Thank you for all the hard work that will be ahead.
Title: Re: E6.5 - 65% custom keyboard(Orders check deadline 4th March)
Post by: excluisve on Sun, 03 March 2019, 21:52:21
Calculate the price you can accept before editing.

it wont change when send invoice then you tell me you need cancel some stuff ,it make too much work and will messed up

thanks all,just want make it clear and smooth  (calculate you price for you order)
Title: Re: E6.5 - 65% custom keyboard(Orders check deadline 4th March)
Post by: Woahder on Sun, 03 March 2019, 22:33:28
Message sent about an edit, thanks!
Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: nephlock on Mon, 04 March 2019, 00:21:24
Sent PM about edits. thanks E!
Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: Visionaire on Mon, 04 March 2019, 00:43:36
So I've created a quick calculator to determine your invoice total. Go ahead and walk through this so you're 100% sure of your selections and the total you'll see from the buy.

https://docs.google.com/spreadsheets/d/1Als0uRZ3JmQc3jCg2HPVWBQEajr_tgyL2Fm0fxTr290/edit?usp=sharing

(https://imgur.com/WXZ4maY.jpg)

This calculator will allow you to see:

1. What your selections and invoice total would be as of midnight EST on 3/3/2019. Any changes made through Exclusive have not been reflected in MY sheet yet (but may in his, don't panic. We'll sync them)
2. How changing your order will change your invoice total

Note: I am not organizing the group buy. Do not send me messages with change requests, they MUST go to Exclusive. I'm just providing a little assistance with Excel.

ALSO: It's a shared spreadsheet. That means more than one person can be in it at a time. If you see someone making selections, just wait until they're done. Otherwise, you're selecting on top of each other...
Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: excluisve on Mon, 04 March 2019, 00:53:54
So I've created a quick calculator to determine your invoice total. Go ahead and walk through this so you're 100% sure of your selections and the total you'll see from the buy.

https://docs.google.com/spreadsheets/d/1Als0uRZ3JmQc3jCg2HPVWBQEajr_tgyL2Fm0fxTr290/edit?usp=sharing

Show Image
(https://imgur.com/WXZ4maY.jpg)


This calculator will allow you to see:

1. What your selections and invoice total would be as of midnight EST on 3/3/2019. Any changes made through Exclusive have not been reflected in MY sheet yet (but may in his, don't panic. We'll sync them)
2. How changing your order will change your invoice total

Note: I am not organizing the group buy. Do not send me messages with change requests, they MUST go to Exclusive. I'm just providing a little assistance with Excel.

ALSO: It's a shared spreadsheet. That means more than one person can be in it at a time. If you see someone making selections, just wait until they're done. Otherwise, you're selecting on top of each other...
Thanks for the help  :thumb:
Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: Visionaire on Mon, 04 March 2019, 00:54:36
Ok, going to make a couple of copies of the calculator so more than one can run at a time. If you see someone editing the version you've clicked into, just go to the next.

Number 2: https://docs.google.com/spreadsheets/d/1MQ4Pe30i_5DOzOHkNjwvicuxgjge5wUMp1Fqx-mamkw/edit?usp=sharing
Number 3: https://docs.google.com/spreadsheets/d/14Zh993Y87_PEMHlCedeuI0qUjhzRWeH1Jy3mtw7ucgA/edit?usp=sharing
Number 4: https://docs.google.com/spreadsheets/d/1bcoDqxfy0ZjZv0N8aHHREvE-EdEX-Vom1Im6Zi4sNRE/edit?usp=sharing
Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: cldskt on Mon, 04 March 2019, 01:04:21
Ok, going to make a couple of copies of the calculator so more than one can run at a time. If you see someone editing the version you've clicked into, just go to the next.

Number 2: https://docs.google.com/spreadsheets/d/1MQ4Pe30i_5DOzOHkNjwvicuxgjge5wUMp1Fqx-mamkw/edit?usp=sharing
Number 3: https://docs.google.com/spreadsheets/d/14Zh993Y87_PEMHlCedeuI0qUjhzRWeH1Jy3mtw7ucgA/edit?usp=sharing
Number 4: https://docs.google.com/spreadsheets/d/1bcoDqxfy0ZjZv0N8aHHREvE-EdEX-Vom1Im6Zi4sNRE/edit?usp=sharing

Thanks! But just a quick note that those of us with Google account could also "Make a Copy" of your existing calculator so there is no need to wait or to make multiple calculators ;)
Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: Visionaire on Mon, 04 March 2019, 01:06:31
Ok, going to make a couple of copies of the calculator so more than one can run at a time. If you see someone editing the version you've clicked into, just go to the next.

Number 2: https://docs.google.com/spreadsheets/d/1MQ4Pe30i_5DOzOHkNjwvicuxgjge5wUMp1Fqx-mamkw/edit?usp=sharing
Number 3: https://docs.google.com/spreadsheets/d/14Zh993Y87_PEMHlCedeuI0qUjhzRWeH1Jy3mtw7ucgA/edit?usp=sharing
Number 4: https://docs.google.com/spreadsheets/d/1bcoDqxfy0ZjZv0N8aHHREvE-EdEX-Vom1Im6Zi4sNRE/edit?usp=sharing

Thanks! But just a quick note that those of us with Google account could also "Make a Copy" of your existing calculator so there is no need to wait or to make multiple calculators ;)

Good point!
Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: swangful on Mon, 04 March 2019, 01:10:48
Ok, going to make a couple of copies of the calculator so more than one can run at a time. If you see someone editing the version you've clicked into, just go to the next.

Number 2: https://docs.google.com/spreadsheets/d/1MQ4Pe30i_5DOzOHkNjwvicuxgjge5wUMp1Fqx-mamkw/edit?usp=sharing
Number 3: https://docs.google.com/spreadsheets/d/14Zh993Y87_PEMHlCedeuI0qUjhzRWeH1Jy3mtw7ucgA/edit?usp=sharing
Number 4: https://docs.google.com/spreadsheets/d/1bcoDqxfy0ZjZv0N8aHHREvE-EdEX-Vom1Im6Zi4sNRE/edit?usp=sharing

Thank you for this. Those costs added up real fast :P
Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: oldcat on Mon, 04 March 2019, 01:33:53
Ok, going to make a couple of copies of the calculator so more than one can run at a time. If you see someone editing the version you've clicked into, just go to the next.

Number 2: https://docs.google.com/spreadsheets/d/1MQ4Pe30i_5DOzOHkNjwvicuxgjge5wUMp1Fqx-mamkw/edit?usp=sharing
Number 3: https://docs.google.com/spreadsheets/d/14Zh993Y87_PEMHlCedeuI0qUjhzRWeH1Jy3mtw7ucgA/edit?usp=sharing
Number 4: https://docs.google.com/spreadsheets/d/1bcoDqxfy0ZjZv0N8aHHREvE-EdEX-Vom1Im6Zi4sNRE/edit?usp=sharing

Wow!! How did you do this? You are an excel wizard!
Need to get your help with our GBs next time :)
Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: mankikami on Mon, 04 March 2019, 06:10:17
Could I edit my order nametag font, and how could I do so ? thanks
Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: excluisve on Mon, 04 March 2019, 06:19:45
Could I edit my order nametag font, and how could I do so ? thanks
Pm me the font link and letters .
Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: Starius on Mon, 04 March 2019, 06:22:28
So I've created a quick calculator to determine your invoice total. Go ahead and walk through this so you're 100% sure of your selections and the total you'll see from the buy.

https://docs.google.com/spreadsheets/d/1Als0uRZ3JmQc3jCg2HPVWBQEajr_tgyL2Fm0fxTr290/edit?usp=sharing

Show Image
(https://imgur.com/WXZ4maY.jpg)


This calculator will allow you to see:

1. What your selections and invoice total would be as of midnight EST on 3/3/2019. Any changes made through Exclusive have not been reflected in MY sheet yet (but may in his, don't panic. We'll sync them)
2. How changing your order will change your invoice total

Note: I am not organizing the group buy. Do not send me messages with change requests, they MUST go to Exclusive. I'm just providing a little assistance with Excel.

ALSO: It's a shared spreadsheet. That means more than one person can be in it at a time. If you see someone making selections, just wait until they're done. Otherwise, you're selecting on top of each other...

Man, that calculator is really cool!   
I should point out though, that for the 20-some of us that have multiple boards, this calculator apparently only will bring up the first of our boards listed in the original spreadsheet. 
Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: Visionaire on Mon, 04 March 2019, 06:48:23
So I've created a quick calculator to determine your invoice total. Go ahead and walk through this so you're 100% sure of your selections and the total you'll see from the buy.

https://docs.google.com/spreadsheets/d/1Als0uRZ3JmQc3jCg2HPVWBQEajr_tgyL2Fm0fxTr290/edit?usp=sharing

Show Image
(https://imgur.com/WXZ4maY.jpg)


This calculator will allow you to see:

1. What your selections and invoice total would be as of midnight EST on 3/3/2019. Any changes made through Exclusive have not been reflected in MY sheet yet (but may in his, don't panic. We'll sync them)
2. How changing your order will change your invoice total

Note: I am not organizing the group buy. Do not send me messages with change requests, they MUST go to Exclusive. I'm just providing a little assistance with Excel.

ALSO: It's a shared spreadsheet. That means more than one person can be in it at a time. If you see someone making selections, just wait until they're done. Otherwise, you're selecting on top of each other...

Man, that calculator is really cool!   
I should point out though, that for the 20-some of us that have multiple boards, this calculator apparently only will bring up the first of our boards listed in the original spreadsheet.

You're right. Since there isn't an order number captured in this process, there isn't a way to look up a distinct order when someone has multiple in the list. Those with multiple boards will only have the first one pulled up this way. I'll unhide another tab which has the raw responses (but still calculates the pricing) and you'll just have to find yourself in the list a couple of times. Sorry bout that.

If you go to this sheet and hit the blue tab, you should be able to look up each of your orders there.

https://docs.google.com/spreadsheets/d/1JKXb2sXk-_ZXl6-_uWTgC8nvb2eaO81UwkSO1V4xiIM/edit?usp=sharing
Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: Starius on Mon, 04 March 2019, 07:05:07
So I've created a quick calculator to determine your invoice total. Go ahead and walk through this so you're 100% sure of your selections and the total you'll see from the buy.

https://docs.google.com/spreadsheets/d/1Als0uRZ3JmQc3jCg2HPVWBQEajr_tgyL2Fm0fxTr290/edit?usp=sharing

Show Image
(https://imgur.com/WXZ4maY.jpg)


This calculator will allow you to see:

1. What your selections and invoice total would be as of midnight EST on 3/3/2019. Any changes made through Exclusive have not been reflected in MY sheet yet (but may in his, don't panic. We'll sync them)
2. How changing your order will change your invoice total

Note: I am not organizing the group buy. Do not send me messages with change requests, they MUST go to Exclusive. I'm just providing a little assistance with Excel.

ALSO: It's a shared spreadsheet. That means more than one person can be in it at a time. If you see someone making selections, just wait until they're done. Otherwise, you're selecting on top of each other...

Man, that calculator is really cool!   
I should point out though, that for the 20-some of us that have multiple boards, this calculator apparently only will bring up the first of our boards listed in the original spreadsheet.

You're right. Since there isn't an order number captured in this process, there isn't a way to look up a distinct order when someone has multiple in the list. Those with multiple boards will only have the first one pulled up this way. I'll unhide another tab which has the raw responses (but still calculates the pricing) and you'll just have to find yourself in the list a couple of times. Sorry bout that.

If you go to this sheet and hit the blue tab, you should be able to look up each of your orders there.

https://docs.google.com/spreadsheets/d/1JKXb2sXk-_ZXl6-_uWTgC8nvb2eaO81UwkSO1V4xiIM/edit?usp=sharing

Cool! Thanks for all the effort you put into creating this, by the by!
Title: Re: E6.5 - 65% custom keyboard
Post by: Rob27shred on Mon, 04 March 2019, 08:06:34
Orders check

https://docs.google.com/spreadsheets/d/1IwRaVVonheMmkqS1j02I3lflphKK55sutiRbX7XznwE/edit?

usp=sharing (https://docs.google.com/spreadsheets/d/1IwRaVVonheMmkqS1j02I3lflphKK55sutiRbX7XznwE/edit?

usp=sharing)


I havent edit the spreadsheet just cancel the repeat one ,i will check each message and edit it



There have been almost 300 forms submitted. Several are likely duplicates, but we have far exceeded the 100 I intended. I am honor all who are in. Your support is awesome and I donít want anyone who has submitted to miss out. This means the later orders may be slightly behind the others in shipping, but I will fulfill all orders.




thanks everyone who submitted! :thumb:


I was sick as hell yesterday & this totally made my day to wake up to! You're awesome exclusive!
Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: Visionaire on Mon, 04 March 2019, 08:48:23
So I've created a quick calculator to determine your invoice total. Go ahead and walk through this so you're 100% sure of your selections and the total you'll see from the buy.

https://docs.google.com/spreadsheets/d/1Als0uRZ3JmQc3jCg2HPVWBQEajr_tgyL2Fm0fxTr290/edit?usp=sharing

Show Image
(https://imgur.com/WXZ4maY.jpg)


This calculator will allow you to see:

1. What your selections and invoice total would be as of midnight EST on 3/3/2019. Any changes made through Exclusive have not been reflected in MY sheet yet (but may in his, don't panic. We'll sync them)
2. How changing your order will change your invoice total

Note: I am not organizing the group buy. Do not send me messages with change requests, they MUST go to Exclusive. I'm just providing a little assistance with Excel.

ALSO: It's a shared spreadsheet. That means more than one person can be in it at a time. If you see someone making selections, just wait until they're done. Otherwise, you're selecting on top of each other...

Man, that calculator is really cool!   
I should point out though, that for the 20-some of us that have multiple boards, this calculator apparently only will bring up the first of our boards listed in the original spreadsheet.

You're right. Since there isn't an order number captured in this process, there isn't a way to look up a distinct order when someone has multiple in the list. Those with multiple boards will only have the first one pulled up this way. I'll unhide another tab which has the raw responses (but still calculates the pricing) and you'll just have to find yourself in the list a couple of times. Sorry bout that.

If you go to this sheet and hit the blue tab, you should be able to look up each of your orders there.

https://docs.google.com/spreadsheets/d/1JKXb2sXk-_ZXl6-_uWTgC8nvb2eaO81UwkSO1V4xiIM/edit?usp=sharing

Cool! Thanks for all the effort you put into creating this, by the by!

Ok, I edited the calculators to create a faux order number to accommodate you big spenders with multiple boards.

New versions of the calculator are here:

A: https://docs.google.com/spreadsheets/d/1GG5FYp-w3sTDcWonOqVA9Py2mM7G5OpVnJLWBSZtAFs/edit?usp=sharing
B: https://docs.google.com/spreadsheets/d/1BADF8Ltvp8iC91BrS_1kLuShg0dULTiXrqsfvkTza0s/edit?usp=sharing
C: https://docs.google.com/spreadsheets/d/1oCUijH6UGDgAi8DUAv7z6TcyKvc8xhfWTffdiTME2KQ/edit?usp=sharing
Title: Re: E6.5 - 65% custom keyboard(Orders check deadline 4th March)
Post by: BAS1C on Mon, 04 March 2019, 09:46:54
All pm already reply

if you not get reply pm me  again .

also check you orders in time ,invoice will send after dealine


Thanks E! This is incredible. Looking forward to another smooth Exclusive GB. E6-v2 R1 was a great one.
Title: Re: E6.5 - 65% custom keyboard(Orders check deadline 4th March)
Post by: Jinnnxxu on Mon, 04 March 2019, 10:15:56
All pm already reply

if you not get reply pm me  again .

also check you orders in time ,invoice will send after dealine


Thanks E! This is incredible. Looking forward to another smooth Exclusive GB. E6-v2 R1 was a great one.

As I know, the next one will be better. ^-^
Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: ContaxS2 on Mon, 04 March 2019, 10:22:30
So I've created a quick calculator to determine your invoice total. Go ahead and walk through this so you're 100% sure of your selections and the total you'll see from the buy.

https://docs.google.com/spreadsheets/d/1Als0uRZ3JmQc3jCg2HPVWBQEajr_tgyL2Fm0fxTr290/edit?usp=sharing

Show Image
(https://imgur.com/WXZ4maY.jpg)


This calculator will allow you to see:

1. What your selections and invoice total would be as of midnight EST on 3/3/2019. Any changes made through Exclusive have not been reflected in MY sheet yet (but may in his, don't panic. We'll sync them)
2. How changing your order will change your invoice total

Note: I am not organizing the group buy. Do not send me messages with change requests, they MUST go to Exclusive. I'm just providing a little assistance with Excel.

ALSO: It's a shared spreadsheet. That means more than one person can be in it at a time. If you see someone making selections, just wait until they're done. Otherwise, you're selecting on top of each other...
Thanks for the help  :thumb:





Only one of my order is showing here, pretty sure the total on the secon order but just wanted to check and confirm
Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: distracteddev on Mon, 04 March 2019, 10:50:31
Any chance of split spacebar support?
Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: Visionaire on Mon, 04 March 2019, 10:53:58
So I've created a quick calculator to determine your invoice total. Go ahead and walk through this so you're 100% sure of your selections and the total you'll see from the buy.

https://docs.google.com/spreadsheets/d/1Als0uRZ3JmQc3jCg2HPVWBQEajr_tgyL2Fm0fxTr290/edit?usp=sharing

Show Image
(https://imgur.com/WXZ4maY.jpg)


This calculator will allow you to see:

1. What your selections and invoice total would be as of midnight EST on 3/3/2019. Any changes made through Exclusive have not been reflected in MY sheet yet (but may in his, don't panic. We'll sync them)
2. How changing your order will change your invoice total

Note: I am not organizing the group buy. Do not send me messages with change requests, they MUST go to Exclusive. I'm just providing a little assistance with Excel.

ALSO: It's a shared spreadsheet. That means more than one person can be in it at a time. If you see someone making selections, just wait until they're done. Otherwise, you're selecting on top of each other...
Thanks for the help  :thumb:





Only one of my order is showing here, pretty sure the total on the secon order but just wanted to check and confirm


Try using this calculator: https://docs.google.com/spreadsheets/d/1GG5FYp-w3sTDcWonOqVA9Py2mM7G5OpVnJLWBSZtAFs/edit?usp=sharing

I see two orders for you:

(https://imgur.com/8inasen.jpg)
Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: ContaxS2 on Mon, 04 March 2019, 11:03:12
ahhh nice was only seeing one before
Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: excluisve on Mon, 04 March 2019, 11:09:37
Tomorrow i will start send invoice it will have  three batches more than 100 ,the rest of orders were in wait list

Please pay in time, after deadline wil be pass .
Title: Re: E6.5 - 65% custom keyboard(Orders check deadline 4th March)
Post by: Darknight00z on Mon, 04 March 2019, 11:28:31
All pm already reply

if you not get reply pm me  again .

also check you orders in time ,invoice will send after dealine


Thanks E! This is incredible. Looking forward to another smooth Exclusive GB. E6-v2 R1 was a great one.

lol good joke

Edit: it was smooth after Exclusive took over  :thumb:
Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: jici92 on Mon, 04 March 2019, 12:35:00
No longer receive the response from the Exclusive 65% keyboard Groupbuy form.
I do not know why the order form does not open.
Title: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: MTXjunkie on Mon, 04 March 2019, 12:38:22
No longer receive the response from the Exclusive 65% keyboard Groupbuy form.
I do not know why the order form does not open.

Orders are closed. They closed at 8pm Saturday night.


Sent from my iPhone using Tapatalk Pro
Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: oldcat on Mon, 04 March 2019, 13:08:02
No longer receive the response from the Exclusive 65% keyboard Groupbuy form.
I do not know why the order form does not open.

Closed a few days ago. Number of orders way surpassed original limit numbers.
Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: excluisve on Mon, 04 March 2019, 13:25:53
No longer receive the response from the Exclusive 65% keyboard Groupbuy form.
I do not know why the order form does not open.
Have any question pm me or email

Is same to other orders

Any time .
Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: jacky on Mon, 04 March 2019, 13:35:55
No longer receive the response from the Exclusive 65% keyboard Groupbuy form.
I do not know why the order form does not open.
You should pm again perhaps mailbox lose it ,however you could ask Exclusive
if someone drop out you can take or not .

Sometime it will have a few orders not pay or cancel

Good luck 👍
Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: Tekniqs on Mon, 04 March 2019, 16:04:49
anyone know how much the PC with brass weights is going to weigh?
Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: Lisinge on Mon, 04 March 2019, 16:22:12
Hey exclusive. Does E6.5 have 19mm spacing? and is it all rows or only bottom row?
Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: excluisve on Mon, 04 March 2019, 23:31:26
New spreadsheet

price with orders check here :

https://bit.ly/2XFaBDq (https://bit.ly/2XFaBDq)



letters and fonts no  rush you can give me anytime even payment done


Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: dantambok on Tue, 05 March 2019, 00:01:40
New spreadsheet

price with orders check here :

https://bit.ly/2XFaBDq (https://bit.ly/2XFaBDq)



Woah that spreadsheet is awesome
Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: Choppersuey on Tue, 05 March 2019, 02:07:28
Paid  :)
Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: wellbeing44 on Tue, 05 March 2019, 02:46:23
Invoices are sent? I haven't received mine

Edit: received, paid, hope the rest goes smoothly  :thumb:
Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: koenoe on Tue, 05 March 2019, 03:33:36
Invoices are sent? I haven't received mine
Me neither
Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: ContaxS2 on Tue, 05 March 2019, 05:05:11
Can pay invoice as soon as i receive it!!
Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: mgsickler on Tue, 05 March 2019, 06:12:28
Paid as well. Thanks for running this!
Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: fleeceman on Tue, 05 March 2019, 06:18:53
Hi I think there is an issue with the form calculating prices because my order (fleeceman-110) has an extra $1 added for no reason. I am not getting any extras so I am not sure where this extra dollar is coming from.

Invoice received and paid. As it was only ~$1 more I am not too bothered and just paid anyway, but I think the spreadsheet is possibly adding if parts of the form were filled out for extra text or something even if 'no' was the answer to the extra.

How do we choose fonts for the name badge? Is there a list of what we can have?
Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: Starius on Tue, 05 March 2019, 06:32:44
I have received and paid my invoices.
I was pleasantly surprised to see the invoice come from "FancyLab" which is the same entity that handled the S7 Elephant.  (The only keyboard kit I've gotten from China that has had 100% no shipping damage so far.) So,  :thumb: for that.  ;D

Also, this group buy has had the most spreadsheet work for any groupbuy I've participated in so far, heh heh.
Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: fleeceman on Tue, 05 March 2019, 06:39:04
I have received and paid my invoices.
I was pleasantly surprised to see the invoice come from "FancyLab" which is the same entity that handled the S7 Elephant.  (The only keyboard kit I've gotten from China that has had 100% no shipping damage so far.) So,  :thumb: for that.  ;D

Also, this group buy has had the most spreadsheet work for any groupbuy I've participated in so far, heh heh.

What order number were you?
Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: excluisve on Tue, 05 March 2019, 06:47:16
I have received and paid my invoices.
I was pleasantly surprised to see the invoice come from "FancyLab" which is the same entity that handled the S7 Elephant.  (The only keyboard kit I've gotten from China that has had 100% no shipping damage so far.) So,  :thumb: for that.  ;D

Also, this group buy has had the most spreadsheet work for any groupbuy I've participated in so far, heh heh.
Hi sir
yes i use my friends paypal to received money .my accont have some problem.
Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: ptiede on Tue, 05 March 2019, 06:50:35
Paid!  :D
Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: Visionaire on Tue, 05 March 2019, 07:08:54
Hi I think there is an issue with the form calculating prices because my order (fleeceman-110) has an extra $1 added for no reason. I am not getting any extras so I am not sure where this extra dollar is coming from.

Also - should I have received an invoice yet? I have not received one.

Hey there - so the spreadsheet automatically looks up the price of an engraving on the extra nameplate. For some reason, you completed the field here to have an engraving ($1) but did not actually order another nameplate. I've explained to Exclusive and he'll be editing your invoice.

(https://imgur.com/t5EmWXe.jpg)
Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: Visionaire on Tue, 05 March 2019, 07:09:24
New spreadsheet

price with orders check here :

https://bit.ly/2XFaBDq (https://bit.ly/2XFaBDq)



Woah that spreadsheet is awesome

Glad you like it!
Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: donut_sauce on Tue, 05 March 2019, 07:09:46
Paid:)
Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: Starius on Tue, 05 March 2019, 07:13:14
What order number were you?

50 and 66, off of the new "Final" order spreadsheet.  I expect the invoices are going out in the order listed there. 

Hi sir
yes i use my friends paypal to received money .my accont have some problem.

I hope the rest of the process goes as smoothly as the group buy has gone up till now!  I know it's success so far is because of all the hard work you've put into it.
Well done! 

Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: Visionaire on Tue, 05 March 2019, 07:25:58
What order number were you?

50 and 66, off of the new "Final" order spreadsheet.  I expect the invoices are going out in the order listed there. 

Hi sir
yes i use my friends paypal to received money .my accont have some problem.

I hope the rest of the process goes as smoothly as the group buy has gone up till now!  I know it's success so far is because of all the hard work you've put into it.
Well done!

Lots of orders and a whole lot of customization. Glad he agreed to go above 100. Fun to see the original spreadsheet that was made just to analyze the responses of folks has been morphed into an order management and invoicing system. It's been fun working with Exclusive to accomplish it and if it helps him deliver a smooth GB, it was worth it. Good dude.
Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: fleeceman on Tue, 05 March 2019, 07:28:11
Hi I think there is an issue with the form calculating prices because my order (fleeceman-110) has an extra $1 added for no reason. I am not getting any extras so I am not sure where this extra dollar is coming from.

Also - should I have received an invoice yet? I have not received one.

Hey there - so the spreadsheet automatically looks up the price of an engraving on the extra nameplate. For some reason, you completed the field here to have an engraving ($1) but did not actually order another nameplate. I've explained to Exclusive and he'll be editing your invoice.

Show Image
(https://imgur.com/t5EmWXe.jpg)


Yes for some reason my phone didn't let me complete the form without filling out this part. It's no big deal, I've paid now with the extra $1, just wanted to flag it in case it affected other orders too.
Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: dantambok on Tue, 05 March 2019, 08:08:25
Huh i did not get an invoice yet   :-X
Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: Visionaire on Tue, 05 March 2019, 08:23:16
Huh i did not get an invoice yet   :-X

He's still working through them. We prepared a batch upload file for PayPal, but he doesn't have the option available to him to actually upload it. So he's manually creating hundreds of invoices. He's been at it for hours. Sounds to be about half way done. You still have about 85 more ahead of you. ;)
Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: Oakelfire on Tue, 05 March 2019, 08:28:15
Got and paid my first invoice - second is order #100 and still waiting for it. Figured the info might help others still waiting! Be patient!

EDIT: Got both, paid both. Be sure to check the spreadsheet status - exclusive is still working through invoices and it may take some time!
Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: Sic_Alpha on Tue, 05 March 2019, 08:28:39
Paid!  Excited for this case  :cool:

FCFS extended to order of paid invoices to determine which batch we're in?
Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: ossetepo on Tue, 05 March 2019, 08:32:27
Woke up, paid invoice, celebrated with coffee
Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: Starius on Tue, 05 March 2019, 08:38:23
What order number were you?

50 and 66, off of the new "Final" order spreadsheet.  I expect the invoices are going out in the order listed there. 

Hi sir
yes i use my friends paypal to received money .my accont have some problem.

I hope the rest of the process goes as smoothly as the group buy has gone up till now!  I know it's success so far is because of all the hard work you've put into it.
Well done!

Lots of orders and a whole lot of customization. Glad he agreed to go above 100. Fun to see the original spreadsheet that was made just to analyze the responses of folks has been morphed into an order management and invoicing system. It's been fun working with Exclusive to accomplish it and if it helps him deliver a smooth GB, it was worth it. Good dude.

Yeah, nice job on your spreadsheet work, man. It really helps keep the chaos in order. 
And also, this is something I also thought about back with the S7, but it's interesting to have these spreadsheets for historical context. 10 - 20 years from now (or beyond) many of these keyboards may change hands several times and it's nice to have a record of their "provenance" as it were, since they're so limited and collectable.
Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: ContaxS2 on Tue, 05 March 2019, 08:38:41
both invoices paid!!!! cant wait for this one, also celebrating with my coffee :)
Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: Visionaire on Tue, 05 March 2019, 08:40:23
Invoices should be out through 150 at this point. Exclusive's been powering through them for many hours now, but time to get some sleep. He'll be resuming the next batch tomorrow.

I have updated the 'Invoicing Summary' tab on this link  (https://bit.ly/2XFaBDq)to reflect those who have been sent invoices. Will be marking them as paid when Exclusive gets back on tomorrow and sends the list of paid invoices. This is not an automatic process, unfortunately, so your patience is appreciated.

Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: Visionaire on Tue, 05 March 2019, 08:41:48
What order number were you?

50 and 66, off of the new "Final" order spreadsheet.  I expect the invoices are going out in the order listed there. 

Hi sir
yes i use my friends paypal to received money .my accont have some problem.

I hope the rest of the process goes as smoothly as the group buy has gone up till now!  I know it's success so far is because of all the hard work you've put into it.
Well done!

Lots of orders and a whole lot of customization. Glad he agreed to go above 100. Fun to see the original spreadsheet that was made just to analyze the responses of folks has been morphed into an order management and invoicing system. It's been fun working with Exclusive to accomplish it and if it helps him deliver a smooth GB, it was worth it. Good dude.

Yeah, nice job on your spreadsheet work, man. It really helps keep the chaos in order. 
And also, this is something I also thought about back with the S7, but it's interesting to have these spreadsheets for historical context. 10 - 20 years from now (or beyond) many of these keyboards may change hands several times and it's nice to have a record of their "provenance" as it were, since they're so limited and collectable.

Agree 100%. Originally started working on this as an experiment on understanding what was selected and so forth, but am considering if there's a way to archive a database for reference later. I know I've enjoyed looking at the original sheet for both of my Duck boards to see what was originally ordered, who bought it, how many people bought the same color way, etc.
Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: Visionaire on Tue, 05 March 2019, 08:42:58
Got and paid my first invoice - second is order #100 and still waiting for it. Figured the info might help others still waiting! Be patient!

You -should- have the second one by now. If not, PM Exclusive and he'll check into it when he resumes.
Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: neojonathan on Tue, 05 March 2019, 08:48:16
Invoices should be out through 150 at this point. Exclusive's been powering through them for many hours now, but time to get some sleep. He'll be resuming the next batch tomorrow.

I have updated the 'Invoicing Summary' tab on this link  (https://bit.ly/2XFaBDq)to reflect those who have been sent invoices. Will be marking them as paid when Exclusive gets back on tomorrow and sends the list of paid invoices. This is not an automatic process, unfortunately, so your patience is appreciated.



Thank you again for organizing these spreadsheets ! They have been helpful !!!
Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: Oakelfire on Tue, 05 March 2019, 09:38:45
Got and paid my first invoice - second is order #100 and still waiting for it. Figured the info might help others still waiting! Be patient!

You -should- have the second one by now. If not, PM Exclusive and he'll check into it when he resumes.

Yep, I got it and paid immediately. :)
Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: dantambok on Tue, 05 March 2019, 09:40:53
Huh i did not get an invoice yet   :-X

He's still working through them. We prepared a batch upload file for PayPal, but he doesn't have the option available to him to actually upload it. So he's manually creating hundreds of invoices. He's been at it for hours. Sounds to be about half way done. You still have about 85 more ahead of you. ;)

Damn you guys must have spent a lot of time with the spreadsheet. Also, i cant imagine how tiring and time consuming it is to make nearly 300 invoices! Hats off to you guys. Now iím imagine how QC is going to go on this. Haha!
Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: bard on Tue, 05 March 2019, 09:48:59
PP has some nice features like invoice generator based on XLS/CSV files  :cool:
Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: Visionaire on Tue, 05 March 2019, 10:03:04
PP has some nice features like invoice generator based on XLS/CSV files  :cool:

Tried that. Made the template and prepared the batch file to upload. Exclusive doesn't have the option in his instance of PayPal to execute it. Not sure if the feature is region locked or if it's not enabled for all accounts, but that means he can't just bulk upload.
Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: andrewregal on Tue, 05 March 2019, 10:04:20
Just paid my invoice! Super happy to be joining another exclusive groupbuy!  :p
Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: odd on Tue, 05 March 2019, 10:19:26
Goddamn it I missed this one too  :(
Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: nephlock on Tue, 05 March 2019, 10:32:46
paid up! can't wait!
Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: oldcat on Tue, 05 March 2019, 11:18:31
Invoices should be out through 150 at this point. Exclusive's been powering through them for many hours now, but time to get some sleep. He'll be resuming the next batch tomorrow.

I have updated the 'Invoicing Summary' tab on this link  (https://bit.ly/2XFaBDq)to reflect those who have been sent invoices. Will be marking them as paid when Exclusive gets back on tomorrow and sends the list of paid invoices. This is not an automatic process, unfortunately, so your patience is appreciated.

Exclusive should add you to his team!

Haha if not we will try to recruit you :) Join our team :)
Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: Visionaire on Tue, 05 March 2019, 11:32:09
Invoices should be out through 150 at this point. Exclusive's been powering through them for many hours now, but time to get some sleep. He'll be resuming the next batch tomorrow.

I have updated the 'Invoicing Summary' tab on this link  (https://bit.ly/2XFaBDq)to reflect those who have been sent invoices. Will be marking them as paid when Exclusive gets back on tomorrow and sends the list of paid invoices. This is not an automatic process, unfortunately, so your patience is appreciated.

Exclusive should add you to his team!

Haha if not we will try to recruit you :) Join our team :)

Haha, thanks for the compliment. I'm a free agent. ;)
Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: Oakelfire on Tue, 05 March 2019, 11:34:22
Invoices should be out through 150 at this point. Exclusive's been powering through them for many hours now, but time to get some sleep. He'll be resuming the next batch tomorrow.

I have updated the 'Invoicing Summary' tab on this link  (https://bit.ly/2XFaBDq)to reflect those who have been sent invoices. Will be marking them as paid when Exclusive gets back on tomorrow and sends the list of paid invoices. This is not an automatic process, unfortunately, so your patience is appreciated.

Exclusive should add you to his team!

Haha if not we will try to recruit you :) Join our team :)

I've been thinking about spinning up some tools for group but runners - you think there is a need?
Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: oldcat on Tue, 05 March 2019, 11:54:00
Invoices should be out through 150 at this point. Exclusive's been powering through them for many hours now, but time to get some sleep. He'll be resuming the next batch tomorrow.

I have updated the 'Invoicing Summary' tab on this link  (https://bit.ly/2XFaBDq)to reflect those who have been sent invoices. Will be marking them as paid when Exclusive gets back on tomorrow and sends the list of paid invoices. This is not an automatic process, unfortunately, so your patience is appreciated.

Exclusive should add you to his team!

Haha if not we will try to recruit you :) Join our team :)

I've been thinking about spinning up some tools for group but runners - you think there is a need?

I think there is a need, for those GB runners who do not want to or unable to set up a shopify account.
Maybe open an IC for your tool? haha will be cool
Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: Starius on Tue, 05 March 2019, 12:13:42
Invoices should be out through 150 at this point. Exclusive's been powering through them for many hours now, but time to get some sleep. He'll be resuming the next batch tomorrow.

I have updated the 'Invoicing Summary' tab on this link  (https://bit.ly/2XFaBDq)to reflect those who have been sent invoices. Will be marking them as paid when Exclusive gets back on tomorrow and sends the list of paid invoices. This is not an automatic process, unfortunately, so your patience is appreciated.

Exclusive should add you to his team!

Haha if not we will try to recruit you :) Join our team :)

I've been thinking about spinning up some tools for group but runners - you think there is a need?

I think there is a need, for those GB runners who do not want to or unable to set up a shopify account.
Maybe open an IC for your tool? haha will be cool

There have been a few entrepenures who have created project management solutions for Indiegogo and Kickstarter platforms, that interact with BackerKit, etc.  I could easily see someone working on a similar project for this community.  It's not a bad idea at all.
Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: trexous on Tue, 05 March 2019, 12:17:42
due date on invoice is 11th of march? thought the due date for payment is 15th
Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: Visionaire on Tue, 05 March 2019, 12:36:53
due date on invoice is 11th of march? thought the due date for payment is 15th

That was based on the original plan of leaving the form open for a week. Turns out he blew through the originally planned 100 keyboards in like 23 minutes (and thus would have been done there). Left the form open for like 9 hours total and after the dust settled on changes / cancellations still ended up with just over 250 keyboards. So he's actually ahead of schedule of getting invoices out on 3/4 - 3/6 when the original plan would have been 3/10-3/11. Add on a week's worth of time to pay the invoice and there you have it. 

Short version: Money's due sooner because the invoices went out sooner.
Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: trexous on Tue, 05 March 2019, 13:01:28
well that sucks since i get paid on 12th.. i even asked him if i could pay him on 13th
Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: Visionaire on Tue, 05 March 2019, 13:08:11
well that sucks since i get paid on 12th.. i even asked him if i could pay him on 13th

Send him a PM. He's a pretty agreeable dude.
Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: tunadesu on Tue, 05 March 2019, 13:31:29
Paid! So pumped  ;D
Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: eyedrop on Tue, 05 March 2019, 13:37:55
FE invoice comes later I am assuming?
Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: noahf on Tue, 05 March 2019, 14:06:00
yeah somehow i have the most expensive invoice, without even trying  :rolleyes:
Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: Darknight00z on Tue, 05 March 2019, 15:43:30
yeah somehow i have the most expensive invoice, without even trying  :rolleyes:

weird flex, but okay
Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: oldcat on Tue, 05 March 2019, 16:11:44
yeah somehow i have the most expensive invoice, without even trying  :rolleyes:

Weird flex, but ok :)
Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: oh_chesteroni on Tue, 05 March 2019, 16:30:17
yeah somehow i have the most expensive invoice, without even trying  :rolleyes:

weird flex, but okay
Flex all over me daddy. Let me feel your flex oozing down throat.
Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: Starius on Tue, 05 March 2019, 16:49:26
This was my favorite thread of the week. 
Then things turned weird.
Real weird.
Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: noahf on Tue, 05 March 2019, 16:58:20
yeah somehow i have the most expensive invoice, without even trying  :rolleyes:

Weird flex, but ok :)

wasnt even trying for a subtle brag. just surprised its the highest.
Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: oldcat on Tue, 05 March 2019, 17:14:28
yeah somehow i have the most expensive invoice, without even trying  :rolleyes:

Weird flex, but ok :)

wasnt even trying for a subtle brag. just surprised its the highest.

Haha :) it's pretty high
Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: Woahder on Tue, 05 March 2019, 17:45:02
Paid! There goes my paycheck. Can't wait!
Title: Re: E6.5 - 65% custom keyboard(Invoice will send at 5th March )
Post by: excluisve on Tue, 05 March 2019, 17:46:25
Already send more  than 100 invoice ,please pay in time

If you have financial difficulties let me know ,also have any question or request pm me (will reply in time )

This buy it wont open again like E7-V1 and no any extra after group buy

thanks everyone ! :thumb:
Title: Re: E6.5 - 65% custom keyboard (Invoiced )
Post by: eyedrop on Tue, 05 March 2019, 17:59:48
exclusive, FE invoice after the regular ones are finished?
Title: Re: E6.5 - 65% custom keyboard (Invoiced )
Post by: Tekniqs on Tue, 05 March 2019, 18:04:37
everyone get their invoice? i still haven't gotten one....
Title: Re: E6.5 - 65% custom keyboard (Invoiced )
Post by: eyedrop on Tue, 05 March 2019, 18:07:53
everyone get their invoice? i still haven't gotten one....

Give it some time, I think exclusive is still working on them.  There are a lot of order to invoice.
Title: Re: E6.5 - 65% custom keyboard (Invoiced )
Post by: excluisve on Tue, 05 March 2019, 18:32:04
exclusive, FE invoice after the regular ones are finished?
Yes.
Title: Re: E6.5 - 65% custom keyboard (Invoiced )
Post by: ReAvenger on Tue, 05 March 2019, 20:06:40
Payment made, can't wait to pair the MAO white with the incoming epbt keycaps
Title: Re: E6.5 - 65% custom keyboard (Invoiced )
Post by: Visionaire on Tue, 05 March 2019, 20:15:06
Payment made, can't wait to pair the MAO white with the incoming epbt keycaps

Should look pretty awesome.
Title: Re: E6.5 - 65% custom keyboard (Invoiced )
Post by: yonghf on Tue, 05 March 2019, 20:20:28
Invoice paid. Thanks again for honouring all orders :D
Title: Re: E6.5 - 65% custom keyboard (Invoiced )
Post by: click clack jack on Tue, 05 March 2019, 20:23:38
Waiting for my invoice still but that is understandable I am one of the very last orders :D
Title: Re: E6.5 - 65% custom keyboard (Invoiced )
Post by: JubJubCity on Tue, 05 March 2019, 21:15:25
Paid can't wait looking forward to the PC!
Title: Re: E6.5 - 65% custom keyboard (Invoiced )
Post by: cyyz on Tue, 05 March 2019, 21:54:19
Paid, thanks a lot!
Title: Re: E6.5 - 65% custom keyboard (Invoiced )
Post by: excluisve on Wed, 06 March 2019, 04:35:40
All invoice were sent out ,please check.
 
if you still not get invoice, pm me

FE will send invoice later hours


Title: Re: E6.5 - 65% custom keyboard (All invoice sent out )
Post by: eyedrop on Wed, 06 March 2019, 08:11:28
Thanks exclusive.  Invoice paid.  The wait begins!
Title: Re: E6.5 - 65% custom keyboard (All invoice sent out )
Post by: bball2 on Wed, 06 March 2019, 12:51:15
Invoice paid! Glad I was able to jump on this group buy  :thumb:
Title: Re: E6.5 - 65% custom keyboard (All invoice sent out )
Post by: Aox on Wed, 06 March 2019, 18:14:57
I just want to say how impressed I am that Exclusive was so responsive in the ordering and modification phase of the group buy, as well as the invoicing.  The communication levels and speed of replies are truly fantastic.  So much the opposite of the ZFrontier GB I'm on, where I'm getting hosed for my board.  After falling in love with the layout on the ALT, I really can't wait to get my new board. 
Title: Re: E6.5 - 65% custom keyboard (All invoice sent out )
Post by: excluisve on Wed, 06 March 2019, 18:29:58
I just want to say how impressed I am that Exclusive was so responsive in the ordering and modification phase of the group buy, as well as the invoicing.  The communication levels and speed of replies are truly fantastic.  So much the opposite of the ZFrontier GB I'm on, where I'm getting hosed for my board.  After falling in love with the layout on the ALT, I really can't wait to get my new board.
Thank for you purchase and approve !
Title: Re: E6.5 - 65% custom keyboard (All invoice sent out )
Post by: Olitender on Wed, 06 March 2019, 21:05:31
I just want to say how impressed I am that Exclusive was so responsive in the ordering and modification phase of the group buy, as well as the invoicing.  The communication levels and speed of replies are truly fantastic.  So much the opposite of the ZFrontier GB I'm on, where I'm getting hosed for my board.  After falling in love with the layout on the ALT, I really can't wait to get my new board.
Thank for you purchase and approve !
Yeah man. Super quick with these 250 invoices. Super impressed with you as agb runner.
Title: Re: E6.5 - 65% custom keyboard (All invoice sent out )
Post by: excluisve on Thu, 07 March 2019, 08:37:28
Invoice due date is almost 11- 13th

if you really love this board due to funds problem plz pm me for extend due date or something

hope you can still join this buy because it wont happen again also no extra

thanks every one .
Title: Re: E6.5 - 65% custom keyboard (All invoice sent out )
Post by: Rob27shred on Thu, 07 March 2019, 08:41:22
Invoice due date is almost 11- 13th

if you really love this board due to funds problem plz pm me for extend due date or something

hope you can still join this buy because it wont happen again also no extra

thanks every one .


Thanks Exclusive, your the man! :)
Title: Re: E6.5 - 65% custom keyboard (Invoiced )
Post by: Rob27shred on Thu, 07 March 2019, 08:43:34
Payment made, can't wait to pair the MAO white with the incoming epbt keycaps

That will be a very nice combo! I went with the Dark Red aluminum to match it up with GMK Jamon myself.
Title: Re: E6.5 - 65% custom keyboard (All invoice sent out )
Post by: Visionaire on Thu, 07 March 2019, 11:49:53
Great to see how flexible Exclusive has been. This is a very complicated buy with lots of options and he's been very accommodating with customizations, changes, and payment dates.
Title: Re: E6.5 - 65% custom keyboard (All invoice sent out )
Post by: eyedrop on Thu, 07 March 2019, 12:00:50
Great to see how flexible Exclusive has been. This is a very complicated buy with lots of options and he's been very accommodating with customizations, changes, and payment dates.

Agree 100%.  exclusive has been very responsive during this GB.   :thumb:
Title: Re: E6.5 - 65% custom keyboard (All invoice sent out )
Post by: Rob27shred on Thu, 07 March 2019, 12:54:21
Great to see how flexible Exclusive has been. This is a very complicated buy with lots of options and he's been very accommodating with customizations, changes, and payment dates.

Agree 100%.  exclusive has been very responsive during this GB.   :thumb:

I third this! I've never been in one of Exclusive's GBs before, but compared to others I have been in Exclusive has easily out done them with flexibility & communication. I know he's swamped right now with getting this all together & I had to PM him twice. One about some issues with my selections & one for a payment deadline extension. Not only did he answer my questions about my selection & give me the extra day I need to pay (my invoice had a pay by date of the 11th & I don't get my next pay till the 12th), he actually responded to both PMs within minutes of me sending them! :eek: Great work Exclusive, we all owe you one for your hard work & flexibility! :thumb:
Title: Re: E6.5 - 65% custom keyboard (All invoice sent out )
Post by: mrkantz on Thu, 07 March 2019, 13:07:37
Paid, thanks E! Excited for my first PC build
Title: Re: E6.5 - 65% custom keyboard (All invoice sent out )
Post by: _ODIN_ on Thu, 07 March 2019, 13:11:35
Excited for my board

Gesendet von meinem H8416 mit Tapatalk

Title: Re: E6.5 - 65% custom keyboard (All invoice sent out )
Post by: tipsyboo on Thu, 07 March 2019, 14:10:09
I'm curious as to why most people go for winkey with blocker as opposed to without?
Is it purely aesthetic?
Or is it being able to use standard 1.25u CTRL and ALT on the right size as opposed to 1.5u? Seems like any decent keycap set has these included anyways.
Title: Re: E6.5 - 65% custom keyboard (All invoice sent out )
Post by: Lisinge on Thu, 07 March 2019, 14:15:39
I'm curious as to why most people go for winkey with blocker as opposed to without?
Is it purely aesthetic?
Or is it being able to use standard 1.25u CTRL and ALT on the right size as opposed to 1.5u? Seems like any decent keycap set has these included anyways.

Only speaking for myself here but i like the look of the blocker, i always have control on caps-lock but i don't mind having the extra ctrl.
Title: Re: E6.5 - 65% custom keyboard (All invoice sent out )
Post by: Aox on Thu, 07 March 2019, 14:41:21
I'm curious as to why most people go for winkey with blocker as opposed to without?
Is it purely aesthetic?
Or is it being able to use standard 1.25u CTRL and ALT on the right size as opposed to 1.5u? Seems like any decent keycap set has these included anyways.

Personally, I like the little bit of separation for the arrow cluster.
Title: Re: E6.5 - 65% custom keyboard (All invoice sent out )
Post by: Starius on Thu, 07 March 2019, 15:10:39
I'm curious as to why most people go for winkey with blocker as opposed to without?
Is it purely aesthetic?
Or is it being able to use standard 1.25u CTRL and ALT on the right size as opposed to 1.5u? Seems like any decent keycap set has these included anyways.

It's been visual aesthetic for me too. In my mind, blockers are one of those aspects that trigger my retro nostalgia feels, so I like them for that.
Title: Re: E6.5 - 65% custom keyboard (All invoice sent out )
Post by: Kevadu on Thu, 07 March 2019, 15:27:11
I'm curious as to why most people go for winkey with blocker as opposed to without?
Is it purely aesthetic?
Or is it being able to use standard 1.25u CTRL and ALT on the right size as opposed to 1.5u? Seems like any decent keycap set has these included anyways.

Makes it easy to locate the arrow keys by feel.
Title: Re: E6.5 - 65% custom keyboard (All invoice sent out )
Post by: oldcat on Thu, 07 March 2019, 16:24:49
I'm curious as to why most people go for winkey with blocker as opposed to without?
Is it purely aesthetic?
Or is it being able to use standard 1.25u CTRL and ALT on the right size as opposed to 1.5u? Seems like any decent keycap set has these included anyways.

Makes it easy to locate the arrow keys by feel.

That blocker is a must have for me for 65% :)
Title: Re: E6.5 - 65% custom keyboard (All invoice sent out )
Post by: Starston3 on Thu, 07 March 2019, 18:17:55
Paid my invoice a few days ago but the spreadsheet had been updated.

Excited for this.
Title: Re: E6.5 - 65% custom keyboard (All invoice sent out )
Post by: Visionaire on Fri, 08 March 2019, 00:21:39
Ok guys - I've updated the spreadsheet to turn our focus on double checking your custom nameplates. Please hit the link and go to the "Nameplate Check" tab. Find your name in the drop down and review the details. PM Exclusive if you have a change.

https://bit.ly/2XFaBDq

(https://imgur.com/6unsgY2.jpg)

I've also made a new "Order Check". This should give you all of the details of your order from end to end. As above, PM Exclusive with issues / concerns, etc. This should be up to date on your order details, total and invoice status (paid, cancelled, etc)

(https://imgur.com/7O9Df3I.jpg)

FE GB version of these will be up tomorrow. In the meantime... need to get some sleep zzzzzzzzzz
Title: Re: E6.5 - 65% custom keyboard (All invoice sent out )
Post by: Rob27shred on Fri, 08 March 2019, 00:39:05
Ok guys - I've updated the spreadsheet to turn our focus on double checking your custom nameplates. Please hit the link and go to the "Nameplate Check" tab. Find your name in the drop down and review the details. PM Exclusive or myself if you have a change.

https://bit.ly/2XFaBDq

Show Image
(https://imgur.com/6unsgY2.jpg)


I've also made a new "Order Check". This should give you all of the details of your order from end to end. As above, PM with issues / concerns, etc. This should be up to date on your order details, total and invoice status (paid, cancelled, etc)

Show Image
(https://imgur.com/7O9Df3I.jpg)


FE GB version of these will be up tomorrow. In the meantime... need to get some sleep zzzzzzzzzz

Thanks for your work on this, it's a great resource for the participants! :thumb:
Title: Re: E6.5 - 65% custom keyboard (All invoice sent out )
Post by: wellbeing44 on Fri, 08 March 2019, 00:51:32
Ok guys - I've updated the spreadsheet to turn our focus on double checking your custom nameplates. Please hit the link and go to the "Nameplate Check" tab. Find your name in the drop down and review the details. PM Exclusive or myself if you have a change.

https://bit.ly/2XFaBDq

Show Image
(https://imgur.com/6unsgY2.jpg)


I've also made a new "Order Check". This should give you all of the details of your order from end to end. As above, PM with issues / concerns, etc. This should be up to date on your order details, total and invoice status (paid, cancelled, etc)

Show Image
(https://imgur.com/7O9Df3I.jpg)


FE GB version of these will be up tomorrow. In the meantime... need to get some sleep zzzzzzzzzz

Thanks! Very useful for getting a quick summary.
Title: Re: E6.5 - 65% custom keyboard (All invoice sent out )
Post by: Puddsy on Fri, 08 March 2019, 01:02:32
I'm curious as to why most people go for winkey with blocker as opposed to without?
Is it purely aesthetic?
Or is it being able to use standard 1.25u CTRL and ALT on the right size as opposed to 1.5u? Seems like any decent keycap set has these included anyways.

the small blocker is useful to find arrow keys but the big blocker doesn't make a ton of sense to me on a board like this
Title: Re: E6.5 - 65% custom keyboard (All invoice sent out )
Post by: Auxo on Fri, 08 March 2019, 01:48:30
I'm curious as to why most people go for winkey with blocker as opposed to without?
Is it purely aesthetic?
Or is it being able to use standard 1.25u CTRL and ALT on the right size as opposed to 1.5u? Seems like any decent keycap set has these included anyways.

the small blocker is useful to find arrow keys but the big blocker doesn't make a ton of sense to me on a board like this

For me, I chose the WKL (aside from also liking wkl boards) specifically because the blocker in PC will allow just a little bit of the color of my plate choice (wathet) to show through to compliment my build (GMK cyan is going on this with a couple of specific artisans :) )
Title: Re: E6.5 - 65% custom keyboard (All invoice sent out )
Post by: dantambok on Fri, 08 March 2019, 03:43:19
Uhh i'm not sure if this has been addressed already, but the plate of the WKL Polycarb case... Will we be seeing the switch hole underneath the blocker?
Title: Re: E6.5 - 65% custom keyboard (All invoice sent out )
Post by: excluisve on Fri, 08 March 2019, 04:52:45
Any change or something else just pm me

Two person may messed up ,if I am outside or. Cant edit it will ask V to help

Thanks for his great help on this groupbuy  :thumb:
Title: Re: E6.5 - 65% custom keyboard (All invoice sent out )
Post by: Olitender on Fri, 08 March 2019, 04:58:36
Oh ****. I forgot about that
Title: Re: E6.5 - 65% custom keyboard (All invoice sent out )
Post by: fleeceman on Fri, 08 March 2019, 06:22:59
When is the deadline for picking a font for the name plate? I don't want to miss it accidentally
Title: Re: E6.5 - 65% custom keyboard (payment deadline 15th)
Post by: excluisve on Fri, 08 March 2019, 08:46:39
When is the deadline for picking a font for the name plate? I don't want to miss it accidentally
End of this month
Font and letter not rush it wonít effect manufacturing
Title: Re: E6.5 - 65% custom keyboard (All invoice sent out )
Post by: Sic_Alpha on Fri, 08 March 2019, 13:54:47
Something I never thought to ask:  Will the Caps Lock backlight have an option to show state instead of just backlighting?  Thanks
Title: Re: E6.5 - 65% custom keyboard (All invoice sent out )
Post by: excluisve on Fri, 08 March 2019, 17:53:41
Something I never thought to ask:  Will the Caps Lock backlight have an option to show state instead of just backlighting?  Thanks
Yes caps lock led could  be different
Title: Re: E6.5 - 65% custom keyboard (All invoice sent out )
Post by: Ponkan on Sat, 09 March 2019, 01:58:00
How do I change my form? I'd like to change my weight A and B into brass pvd gold.
Title: Re: E6.5 - 65% custom keyboard (All invoice sent out )
Post by: nephlock on Sat, 09 March 2019, 01:58:52
How do I change my form? I'd like to change my weight A into brass.
Should be able to PM exclusive or visionaire
Title: Re: E6.5 - 65% custom keyboard (All invoice sent out )
Post by: Ponkan on Sat, 09 March 2019, 01:59:45
How do I change my form? I'd like to change my weight A into brass.
Should be able to PM exclusive or visionaire

Thanks!
Title: Re: E6.5 - 65% custom keyboard (All invoice sent out )
Post by: excluisve on Sat, 09 March 2019, 02:26:35
How do I change my form? I'd like to change my weight A and B into brass pvd gold.
Get you email
Title: Re: E6.5 - 65% custom keyboard (All invoice sent out )
Post by: Morgan3Wheeler on Sat, 09 March 2019, 08:29:25
I paid yesterday.
Update spreadsheet please.
Title: Re: E6.5 - 65% custom keyboard (All invoice sent out )
Post by: excluisve on Sat, 09 March 2019, 08:46:57
Will update payment later later days
Title: Re: E6.5 - 65% custom keyboard (All invoice sent out )
Post by: oldcat on Sat, 09 March 2019, 09:09:27
How do I change my form? I'd like to change my weight A into brass.
Should be able to PM exclusive or visionaire

What? Visionaire already recruited?? :(
Title: Re: E6.5 - 65% custom keyboard (All invoice sent out )
Post by: Visionaire on Sat, 09 March 2019, 09:43:58
How do I change my form? I'd like to change my weight A into brass.
Should be able to PM exclusive or visionaire

What? Visionaire already recruited?? :(

Ha. Nope. I've helped put spreadsheets together. Message Exclusive with changes. ;)
Title: Re: E6.5 - 65% custom keyboard (Payment deadline 15th/June )
Post by: ContaxS2 on Sun, 10 March 2019, 03:05:19
Also paid but not showing on spreadsheet
Title: Re: E6.5 - 65% custom keyboard (Payment deadline 15th/June )
Post by: Tekniqs on Sun, 10 March 2019, 04:59:12
wait what? payment deadline is June 15 now?
Title: Re: E6.5 - 65% custom keyboard (Payment deadline 15th/June )
Post by: nug on Sun, 10 March 2019, 05:15:04
wait what? payment deadline is June 15 now?
15th March, shipping should start in June
Title: Re: E6.5 - 65% custom keyboard (Payment deadline 15th/June )
Post by: wt5now on Sun, 10 March 2019, 06:05:38
I'm really looking forward to this keyboard. I hope you make good.
Title: Re: E6.5 - 65% custom keyboard (Payment deadline 15th/June )
Post by: Visionaire on Sun, 10 March 2019, 07:39:56
Also paid but not showing on spreadsheet

Has to be manually updated. Exclusive will change it in batches.
Title: Re: E6.5 - 65% custom keyboard (Payment deadline 15th/June )
Post by: excluisve on Mon, 11 March 2019, 10:13:55
Also paid but not showing on spreadsheet

Has to be manually updated. Exclusive will change it in batches.
All invoice will change it tmr
Title: Re: E6.5 - 65% custom keyboard (Payment deadline 15th/June )
Post by: Rob27shred on Mon, 11 March 2019, 10:28:52
I'll definitely have my payment in later tonight or first thing tomorrow morning depending on what time my pay hits my bank account. I usually get it anywhere between 10pm & midnight, so as soon I as I got it I'll get my invoice paid right up. Thanks again for working with me on this Exclusive, I highly appreciate it! :thumb:
Title: Re: E6.5 - 65% custom keyboard (Payment Check)
Post by: soveryscary on Tue, 12 March 2019, 01:47:10
is the payment due on the 13th or 15th?
Title: Re: E6.5 - 65% custom keyboard (Payment Check)
Post by: Rob27shred on Tue, 12 March 2019, 02:05:10
Finally all paid up! ;D
Title: Re: E6.5 - 65% custom keyboard (Payment Check)
Post by: excluisve on Tue, 12 March 2019, 21:17:16
is the payment due on the 13th or 15th?
Due date almost on the 13th ,someone request me extend to 15th

Title: Re: E6.5 - 65% custom keyboard (Payment Check)
Post by: excluisve on Fri, 15 March 2019, 22:05:20
Payment deadline is 15th

please identify if you want a half or full plate for extras,if you want half plate just let me know otherwise it will be full plate wont mark (half)

please check you orders again i will sort after today

Non- FE https://docs.google.com/spreadsheets/d/1myWCykUO_aeRDoJrIVNerexVe0-vdnYtHcJ17PkX-vU/edit#gid=1467255002 (https://docs.google.com/spreadsheets/d/1myWCykUO_aeRDoJrIVNerexVe0-vdnYtHcJ17PkX-vU/edit#gid=1467255002)

FE:  https://docs.google.com/spreadsheets/d/1kCDtP3u684khxl2ZVuDq1JvuhXwfQDvwsTghgjZ8X6c/edit#gid=1058478887 (https://docs.google.com/spreadsheets/d/1kCDtP3u684khxl2ZVuDq1JvuhXwfQDvwsTghgjZ8X6c/edit#gid=1058478887)
Title: Re: E6.5 - 65% custom keyboard (Last time to confirm you orders !)
Post by: ItsAllen on Fri, 15 March 2019, 23:37:52
Lets get this show on the road baby!
Title: Re: E6.5 - 65% custom keyboard (Last time to confirm you orders !)
Post by: excluisve on Mon, 18 March 2019, 21:00:11
Confirm you orders especially the top layout ,we will manufacture accroding to this table

so make sure you order totally correct !
Title: Re: E6.5 - 65% custom keyboard (Last time to confirm you orders !)
Post by: DisplayERROR on Tue, 19 March 2019, 09:18:02
If everything looks right, do we have to follow-up and confirm? Sorry if that's a silly question. My order looks good!
Title: Re: E6.5 - 65% custom keyboard (Last time to confirm you orders !)
Post by: fleeceman on Tue, 19 March 2019, 14:03:57
Has anyone chosen a different font? Need some ideas!
Title: Re: E6.5 - 65% custom keyboard (Last time to confirm you orders !)
Post by: Visionaire on Tue, 19 March 2019, 14:12:56
Has anyone chosen a different font? Need some ideas!

Lots of different fonts chosen! I think alot of folks went to dafont.com and picked something they liked.

Title: Re: E6.5 - 65% custom keyboard (Last time to confirm you orders !)
Post by: cldskt on Tue, 19 March 2019, 19:01:47
Has anyone chosen a different font? Need some ideas!
You can check the google sheets under ďForm ReaponsesĒ to check what people went with.
Title: Re: E6.5 - 65% custom keyboard (Last time to confirm you orders !)
Post by: JubJubCity on Tue, 19 March 2019, 20:19:08
Order looks good to me as well.
Title: Re: E6.5 - 65% custom keyboard (Last time to confirm you orders !)
Post by: Starius on Tue, 19 March 2019, 20:33:00
All systems are Go, for me also.

(https://cdn.dribbble.com/users/1699441/screenshots/3592241/rocket_launch_800x600_v2.gif)
Title: Re: E6.5 - 65% custom keyboard (Last time to confirm you orders !)
Post by: Jayveur on Wed, 20 March 2019, 00:49:32
sadly was too late for this
Title: Re: E6.5 - 65% custom keyboard (Last time to confirm you orders !)
Post by: Marutks on Wed, 20 March 2019, 06:14:16
me too
I missed this GB   :'(
Title: Re: E6.5 - 65% custom keyboard (Sorting table)
Post by: trexous on Fri, 22 March 2019, 02:06:26
Due to unforeseen circumstances I am forced to sell my spot in this group buy. And due to the nature of the emergency exclusive has allowed me to sell my spot. My spot includes a Polycarbonate E6.5 with a rose gold plate, weight and badge. Need the money urgently so I will sell to someone who can pay their invoice the earliest. Please pm me and I will give exclusive the details

Edit: spot is sold
Title: Re: E6.5 - 65% custom keyboard (Sorting table)
Post by: eyedrop on Fri, 22 March 2019, 08:17:39
Sorry to hear about your unforeseen circumstances, trexous.  Hope you're ok.  You shouldn't have trouble selling your spot.  Good luck!
Title: Re: E6.5 - 65% custom keyboard (Sorting table)
Post by: trexous on Fri, 22 March 2019, 08:36:52
Sorry to hear about your unforeseen circumstances, trexous.  Hope you're ok.  You shouldn't have trouble selling your spot.  Good luck!

Yes very unfortunate as this is such a beautiful board. Thanks for your wishes.

Sorry to the people that pmed me, literally sold it within minutes of me posting. Sorry guys!
Title: Re: E6.5 - 65% custom keyboard (Sorting table)
Post by: Jayveur on Fri, 22 March 2019, 08:39:52
rip iím 0/2
Title: Re: E6.5 - 65% custom keyboard (Sorting table)
Post by: Jayveur on Fri, 22 March 2019, 09:40:21
trying to take an e65 spot if anyone doesnít want anymore, missed on this beauty :/
Title: Re: E6.5 - 65% custom keyboard (Sorting table)
Post by: excluisve on Fri, 22 March 2019, 20:23:31
All orders settled down ,and now is sorting table after that will send tables to factory soon

So there was no change for refund or selling now,I have my principles .

Let us  move !

Thanks !
Title: Re: E6.5 - 65% custom keyboard (Sorting table)
Post by: cldskt on Fri, 22 March 2019, 20:39:30
All orders settled down ,and now is sorting table after that will send tables to factory soon

So there was no change for refund or selling now,I have my principles .

Let us  move !

Thanks !


Thanks for the update E!
Title: Re: E6.5 - 65% custom keyboard (Sorting table)
Post by: JubJubCity on Mon, 25 March 2019, 18:34:22
All orders settled down ,and now is sorting table after that will send tables to factory soon

So there was no change for refund or selling now,I have my principles .

Let us  move !

Thanks !

Awesome!!!!!
Title: Re: E6.5 - 65% custom keyboard (Sorting table)
Post by: Rob27shred on Mon, 25 March 2019, 18:36:59
All orders settled down ,and now is sorting table after that will send tables to factory soon

So there was no change for refund or selling now,I have my principles .

Let us  move !

Thanks !


:cool:
Title: Re: E6.5 - 65% custom keyboard (Sorting table)
Post by: excluisve on Sun, 31 March 2019, 06:28:01
All orders sorted down

send to factory already

if you have pm me but i havnt reply plz do it agian so sorry busy on mcuh things
Title: Re: E6.5 - 65% custom keyboard (Sorted down)
Post by: Von Steve on Sun, 31 March 2019, 15:06:23
Out of curiosity why was the buying window so short?
Title: Re: E6.5 - 65% custom keyboard (Sorted down)
Post by: clik_clak on Sun, 31 March 2019, 15:10:28
Out of curiosity why was the buying window so short?

It would've been much shorter, but they ended up getting 3x as many orders as expected before it was closed. I believe it was planned to stay open until 100 orders were placed...That happened in about an hour (or less). I believe when they realized how many orders over 100 they had, they decided to call it then.
Title: Re: E6.5 - 65% custom keyboard (Sorted down)
Post by: MatthewPham on Sun, 31 March 2019, 17:39:08
Out of curiosity why was the buying window so short?

It would've been much shorter, but they ended up getting 3x as many orders as expected before it was closed. I believe it was planned to stay open until 100 orders were placed...That happened in about an hour (or less). I believe when they realized how many orders over 100 they had, they decided to call it then.

nah was definitely at least 6 hours +
Title: Re: E6.5 - 65% custom keyboard (Sorted down)
Post by: allllaboutyou on Mon, 01 April 2019, 15:14:29
looks like I was late on this one...any chance of an E8 GB in the future?
Title: Re: E6.5 - 65% custom keyboard (Sorted down)
Post by: fatpolomanjr on Mon, 01 April 2019, 20:13:16
looks like I was late on this one...any chance of an E8 GB in the future?

There already was an E8, but it was ran by someone else. It...didn't go so well...

https://geekhack.org/index.php?topic=87572.0
Title: Re: E6.5 - 65% custom keyboard (Sorted down)
Post by: ConfuseBill on Tue, 02 April 2019, 09:03:41
looks like I was late on this one...any chance of an E8 GB in the future?

There already was an E8, but it was ran by someone else. It...didn't go so well...

https://geekhack.org/index.php?topic=87572.0

KIN25 is running V2 for TX75/84/87/CP keyboards in TX Keyboard website until 4 April 2019. Should check that out.
Title: Re: E6.5 - 65% custom keyboard (Sorted down)
Post by: maximize on Tue, 02 April 2019, 13:51:57
looks like I was late on this one...any chance of an E8 GB in the future?

There already was an E8, but it was ran by someone else. It...didn't go so well...

https://geekhack.org/index.php?topic=87572.0

JFC, that reads like a horror story.
Title: Re: E6.5 - 65% custom keyboard (Sorted down)
Post by: allllaboutyou on Tue, 02 April 2019, 20:05:07
looks like I was late on this one...any chance of an E8 GB in the future?

There already was an E8, but it was ran by someone else. It...didn't go so well...

https://geekhack.org/index.php?topic=87572.0

JFC, that reads like a horror story.

yup that's why I'm hoping we get a more reliable GB for it a second time around
Title: Re: E6.5 - 65% custom keyboard (Sorted down)
Post by: wellbeing44 on Wed, 03 April 2019, 01:25:22
looks like I was late on this one...any chance of an E8 GB in the future?

There already was an E8, but it was ran by someone else. It...didn't go so well...

https://geekhack.org/index.php?topic=87572.0

JFC, that reads like a horror story.

yup that's why I'm hoping we get a more reliable GB for it a second time around
I believe all the ones directly run by Exclusive were reliable, so we're in a good position.
Title: Re: E6.5 - 65% custom keyboard (Sorted down)
Post by: daviddoi on Wed, 03 April 2019, 02:46:11
is this gb already at its limit? really interested in a e white one 🥺
Title: Re: E6.5 - 65% custom keyboard (Sorted down)
Post by: dantambok on Wed, 03 April 2019, 06:42:08
is this gb already at its limit? really interested in a e white one 🥺

lol
Title: Re: E6.5 - 65% custom keyboard (Sorted down)
Post by: Sic_Alpha on Wed, 03 April 2019, 11:50:50
is this gb already at its limit? really interested in a e white one 🥺

Yes it's closed.
Title: Re: E6.5 - 65% custom keyboard (Sorted down)
Post by: Blank on Thu, 04 April 2019, 06:09:55
Does the spacebar use 6.25U or 7U stabs?
Title: Re: E6.5 - 65% custom keyboard (Sorted down)
Post by: donut_sauce on Thu, 04 April 2019, 06:18:21
Does the spacebar use 6.25U or 7U stabs?
depends which layout you chose
Title: Re: E6.5 - 65% custom keyboard (Sorted down)
Post by: cldskt on Thu, 04 April 2019, 06:34:57
is this gb already at its limit? really interested in a e white one 🥺

lol

Hey be nice
Title: Re: E6.5 - 65% custom keyboard (Sorted down)
Post by: dantambok on Thu, 04 April 2019, 06:35:27
is this gb already at its limit? really interested in a e white one 🥺

lol

Hey be nice

Sorry dad
Title: Re: E6.5 - 65% custom keyboard (Sorted down)
Post by: BAS1C on Thu, 04 April 2019, 09:33:39
looks like I was late on this one...any chance of an E8 GB in the future?

There already was an E8, but it was ran by someone else. It...didn't go so well...

https://geekhack.org/index.php?topic=87572.0

JFC, that reads like a horror story.

yup that's why I'm hoping we get a more reliable GB for it a second time around

Yes, do not worry. There have been 2 rounds of E6-v2 and a E7 run since then and they all went very smoothly! E8 was not run directly thru exclusive, and all the others were. As long as he handles it all, do not worry :)
Title: Re: E6.5 - 65% custom keyboard (Sorted down)
Post by: Blank on Thu, 04 April 2019, 09:58:08
Does the spacebar use 6.25U or 7U stabs?
depends which layout you chose
If it's the wk with block layout, what would that use ?
Title: E6.5 - 65% custom keyboard (Sorted down)
Post by: cldskt on Thu, 04 April 2019, 12:36:45
Does the spacebar use 6.25U or 7U stabs?
depends which layout you chose
If it's the wk with block layout, what would that use ?
Still depends on the bottom row.

Refer to the layout pic in the OP.
Title: Re: E6.5 - 65% custom keyboard (Sorted down)
Post by: Blank on Thu, 04 April 2019, 12:47:45
Does the spacebar use 6.25U or 7U stabs?
depends which layout you chose
If it's the wk with block layout, what would that use ?
Still depends on the bottom row.

Refer to the layout pic in the OP.
Where in the order form would I see which bottom row was chosen? Isn't wk with block layout the bottom row?
Title: Re: E6.5 - 65% custom keyboard (Sorted down)
Post by: eyedrop on Thu, 04 April 2019, 13:45:31

Where in the order form would I see which bottom row was chosen? Isn't wk with block layout the bottom row?

If you look at the layout from the OP, for WK with block layout, you can build:

1.25 | 1.25 | 1.25 | 6.25 | 1.25 | 1.25

or

1.5 | 1 | 1.5 | 7 | 1.5

as the bottom row.

Hope this helps.
Title: Re: E6.5 - 65% custom keyboard (Sorted down)
Post by: Blank on Thu, 04 April 2019, 14:23:37

Where in the order form would I see which bottom row was chosen? Isn't wk with block layout the bottom row?

If you look at the layout from the OP, for WK with block layout, you can build:

1.25 | 1.25 | 1.25 | 6.25 | 1.25 | 1.25

or

1.5 | 1 | 1.5 | 7 | 1.5

as the bottom row.

Hope this helps.
Would that mean one is able to use up to 6 stabs bottom row? On the render it only shows 1 stab at the spacebar. Sorry for the maybe obvious questions it is my first time in a gp
Title: Re: E6.5 - 65% custom keyboard (Sorted down)
Post by: nephlock on Thu, 04 April 2019, 14:25:37
Would that mean one is able to use up to 6 stabs bottom row? On the render it only shows 1 stab at the spacebar. Sorry for the maybe obvious questions it is my first time in a gp

Only longer keys need a stab, so the 6.25u and the 7u. the other keys do not require stabilizers.
Title: Re: E6.5 - 65% custom keyboard (Sorted down)
Post by: Owl- on Thu, 04 April 2019, 15:55:47
Would that mean one is able to use up to 6 stabs bottom row? On the render it only shows 1 stab at the spacebar. Sorry for the maybe obvious questions it is my first time in a gp

Anything 2u and above in keysize will have the opportunity to utilise a stabiliser. The standard stabiliser wire sizes are 2U, 6.25, 7u. The less common is 6U, though findable; your very less common sizes will be anything in between those.
Title: Re: E6.5 - 65% custom keyboard (Sorted down)
Post by: Blank on Thu, 04 April 2019, 16:20:12
Would that mean one is able to use up to 6 stabs bottom row? On the render it only shows 1 stab at the spacebar. Sorry for the maybe obvious questions it is my first time in a gp

Anything 2u and above in keysize will have the opportunity to utilise a stabiliser. The standard stabiliser wire sizes are 2U, 6.25, 7u. The less common is 6U, though findable; your very less common sizes will be anything in between those.
Ohh I see! How many is the usual amount or how many would u use?
Title: Re: E6.5 - 65% custom keyboard (Sorted down)
Post by: allllaboutyou on Thu, 04 April 2019, 16:42:04
looks like I was late on this one...any chance of an E8 GB in the future?

There already was an E8, but it was ran by someone else. It...didn't go so well...

https://geekhack.org/index.php?topic=87572.0

JFC, that reads like a horror story.

yup that's why I'm hoping we get a more reliable GB for it a second time around

Yes, do not worry. There have been 2 rounds of E6-v2 and a E7 run since then and they all went very smoothly! E8 was not run directly thru exclusive, and all the others were. As long as he handles it all, do not worry :)

hoping he does an E8 run in the future!  :)
Title: Re: E6.5 - 65% custom keyboard (Sorted down)
Post by: Owl- on Thu, 04 April 2019, 17:42:35
Ohh I see! How many is the usual amount or how many would u use?

A standard 60% keyboard will use a total of 5 stabilisers - four 2U and one 6.25u. It's used with the space bar, two shift keys, your enter/return and the backspace.
[attach=1]

Keys with extra holes will utilise stabilisers. The image below shows the common sizes:
[attach=2]


How many you would use is dependent on your layout of choice and up to you, ones preference. It can be none at all to your general set of 8 on a full-size standard keyboard or more stabilisers as you peak into custom builds on your keyboard adventures.

Title: Re: E6.5 - 65% custom keyboard (Sorted down)
Post by: EnjoyMyInSec on Fri, 05 April 2019, 07:41:12
Hi guys, due to personnal problem I need some money and I'd like to sell my spot, feel free to PM me if you're interested

EDIT : My spot is sold, thanks for all the PM guys !  :thumb:
Title: Re: E6.5 - 65% custom keyboard (Sorted down)
Post by: yur1orlov on Fri, 05 April 2019, 08:00:46
is this gb already at its limit? really interested in a e white one 🥺

Haha looks like you're in luck. Check the post above mine.. e-white guy wants out
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: excluisve on Sun, 07 April 2019, 21:32:13
we have been wait almost a week ,now is start manufacturing
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: wellbeing44 on Sun, 07 April 2019, 22:07:09
we have been wait almost a week ,now is start manufacturing
I can't wait ;D
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: fleeceman on Mon, 08 April 2019, 07:10:52
What will happen if it is not possible to use our chosen fonts? I noticed that some people picked fonts that don't include the letters/numbers they want to use so I imagine these ones will not be possible.
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: vicissitude on Mon, 08 April 2019, 08:46:17
YES. One big step forward.
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: excluisve on Mon, 08 April 2019, 09:46:11
What will happen if it is not possible to use our chosen fonts? I noticed that some people picked fonts that don't include the letters/numbers they want to use so I imagine these ones will not be possible.
If you cant find which font you like then i will make it to default fonts
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: excluisve on Mon, 08 April 2019, 09:47:54
One more things,if you still not give me the fonts link plz let me know

Deadline is 15/4 i will start make custom text after deadline .


Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: senryo on Tue, 09 April 2019, 14:22:19
Thanks for the update! Any new prototypes pictures that help us quench our thirst with it :p?
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: fleeceman on Fri, 12 April 2019, 05:06:16
Does the plate support short left shift? For ISO layouts
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: misonerdy on Fri, 12 April 2019, 13:08:36
Hey everyone! Due to some financial constraints, I am offering up my group buy spot.

I ordered the following:
-Grey case colorway
-Brass plate (pvd gold)
-Weight A/B sandblasted brass
-Name plate (pvd gold)

Please dm or message me if interested! Thank you very much =)
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: noahf on Fri, 12 April 2019, 20:51:46
if it were a pc spot i would buy it for my second 6.5, but i dont think you will have a problem getting rid of it.
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: quanghuy1200 on Fri, 12 April 2019, 21:20:29
if it were a pc spot i would buy it for my second 6.5, but i dont think you will have a problem getting rid of it.

I do have a PC spot for sale at cost. Pm'ing :)
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: 3ambutter on Fri, 12 April 2019, 21:59:27
Hey everyone! Due to some financial constraints, I am offering up my group buy spot.

I ordered the following:
-Grey case colorway
-Brass plate (pvd gold)
-Weight A/B sandblasted brass
-Name plate (pvd gold)

Please dm or message me if interested! Thank you very much =)

PM'd
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: AlcoholEnthusiast on Fri, 12 April 2019, 23:27:40
If anyone wanted to trade their spot for a Leaf 60 (2 plate/2pcb, brass weight/plate) lmk. Turns out I'm not a huge fan of 60%
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: Vadurr on Sat, 13 April 2019, 09:49:01
Interested in a PC version if anyone decides to give up a spot :)
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: evoluchanel on Sat, 13 April 2019, 14:27:36
If anyone wanted to trade their spot for a Leaf 60 (2 plate/2pcb, brass weight/plate) lmk. Turns out I'm not a huge fan of 60%

Pm
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: nickaster1 on Mon, 15 April 2019, 09:41:47
Changing plans so now Iím really in need for a polycarb/brass full plate. Send help pls?
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: 3ambutter on Mon, 15 April 2019, 18:53:01
Looking to take somebody's GB spot for alu grey+brass/PC plate if they decide to opt out. Just send me a PM, ty.
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: ContaxS2 on Fri, 19 April 2019, 17:07:34
Just stopping by to say Iím still very excited, Iím in for 2 and no you canít have them  :D
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: noahf on Fri, 19 April 2019, 19:43:40
Just stopping by to say Iím still very excited, Iím in for 2 and no you canít have them  :D

just to be fair, im so excited im trying to buy my 2nd, a pc version. last one fell through, so im still in the market.
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: evoluchanel on Sat, 20 April 2019, 21:20:34
Plans have changed and I'm looking to transfer my spot.


(https://cdn.discordapp.com/attachments/241368070055133185/569346462664753172/E6.5_Order.png)


Most accessible on discord: evoluchanel#4975


EDIT: he gone
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: fleeceman on Mon, 22 April 2019, 06:48:57
Is it too late to buy an extra nameplate?
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: excluisve on Thu, 25 April 2019, 21:37:40
Is it too late to buy an extra nameplate?
Yea too late
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: excluisve on Thu, 25 April 2019, 21:41:28
Some update

#Plate finish 60%
#case start CNC

# case carry box manufacturing
#pcb manufacturing

Factory very busy now

Sorry for delay update ,coz this month have some personal things to deal with

Will post more details later when next time go factory to  check .
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: Puddsy on Thu, 25 April 2019, 22:14:51
Some update

#Plate finish 60%
#case start CNC

# case carry box manufacturing
#pcb manufacturing

Factory very busy now

Sorry for delay update ,coz this month have some personal things to deal with

Will post more details later when next time go factory to  check .


hope everything is ok with you exclusive, thanks for the update
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: aroostercat on Tue, 30 April 2019, 14:41:27
Looking for a spot: Grey WKL with brass weight and plate
Message on here or reddit under the same name

Thank you!
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: petamva on Wed, 01 May 2019, 02:17:58
Interested in a PC version WKL with blocker. PM me here or on mechmarket /u/petamva. Thanks!
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: pumice on Wed, 01 May 2019, 13:55:37
Looking for Polycarb/e-black WKL or standard version, let me know here or on reddit u/pumiceminds if your're willing to give up your spot.
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: binphan161 on Wed, 01 May 2019, 17:51:31
Also looking for a WKL with block in any color with a brass weight! If anyone wants to sell their spot please let me know :)
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: Sazuke9 on Fri, 03 May 2019, 16:27:16
Looking for any PC /w wkl pls pm if anyone wants to give up their spot. Thank you :)
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: Veats on Sun, 05 May 2019, 16:23:07
Sadly I have to sell my spot for this GB. If anyone is interested let me know, case is E White wk with block, plate dark red, weight E black, weight B dark red, Default rose gold name tag.
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: nickaster1 on Mon, 06 May 2019, 21:20:55
Iím looking for a plate or plate + pcb combo (full plate, pc plate pref). If anyone is looking go sell, please contact me here or via kiinoz#1051 on Discord. Thanks
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: brighenne on Mon, 06 May 2019, 21:59:51
Also looking to transfer my spots:
(https://i.imgur.com/IqZDEhF.png)
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: maltedsoyamilk on Tue, 07 May 2019, 10:34:40
Unfortunately I have to sell my spot for this board due to urgent need for funds  :'( If anyone interested please let me know. PM me here or on discord: maltedsoyamilk#8741 Info is in the pic
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: DePulse on Tue, 07 May 2019, 10:52:01
long shot but is there anyone out there who bought an hhkb layout that wants to sell their spot? Preferably polycarb. Shoot me a message or send me a pm on discord. DePulse #3682
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: maddog111 on Tue, 07 May 2019, 15:11:55
wanna let go of my spot as well

goodluck with gb, hope dont turn out like last time.
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: ptiede on Tue, 07 May 2019, 20:08:09
wanna let go of my spot as well

goodluck with gb, hope dont turn out like last time.
Last time? All of exclusives group buys that he has run have turned out great.
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: aroostercat on Tue, 07 May 2019, 20:10:46
wanna let go of my spot as well

goodluck with gb, hope dont turn out like last time.
Can't find you on the order check spreadsheet
What options and layout is your spot?
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: excluisve on Tue, 07 May 2019, 21:28:56
Now not accept the exchange until shipping time .

Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: excluisve on Tue, 07 May 2019, 21:30:11
wanna let go of my spot as well

goodluck with gb, hope dont turn out like last time.
The spreadsheet not have you ID .
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: cldskt on Tue, 07 May 2019, 21:50:00
Now not accept the exchange until shipping time .



Ooo does this mean that the manufacturing process is almost done?
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: excluisve on Tue, 07 May 2019, 22:07:30
Now not accept the exchange until shipping time .



Ooo does this mean that the manufacturing process is almost done?
Too early said that,we still need much time  :D :D
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: maddog111 on Wed, 08 May 2019, 02:10:41
wanna let go of my spot as well

goodluck with gb, hope dont turn out like last time.
Last time? All of exclusives group buys that he has run have turned out great.


look at e8
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: Lockkkk on Wed, 08 May 2019, 02:24:16
wanna let go of my spot as well

goodluck with gb, hope dont turn out like last time.
Last time? All of exclusives group buys that he has run have turned out great.

look at e8

You are maybe still live in the year of 2016  :D
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: maddog111 on Wed, 08 May 2019, 02:49:05
wanna let go of my spot as well

goodluck with gb, hope dont turn out like last time.
Last time? All of exclusives group buys that he has run have turned out great.

look at e8

You are maybe still live in the year of 2016  :D

 and E8 still have not finished shipping   ;D
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: dantambok on Wed, 08 May 2019, 04:16:52
E8 was ran by someone else tho? Not exclusive himself?
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: cldskt on Wed, 08 May 2019, 04:21:29
wanna let go of my spot as well

goodluck with gb, hope dont turn out like last time.
Last time? All of exclusives group buys that he has run have turned out great.

look at e8

You are maybe still live in the year of 2016  :D

 and E8 still have not finished shipping   ;D

Imagine creating an account just to say you have fictitious order to sell.
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: maddog111 on Wed, 08 May 2019, 05:48:45
wanna let go of my spot as well

goodluck with gb, hope dont turn out like last time.
Last time? All of exclusives group buys that he has run have turned out great.

look at e8

You are maybe still live in the year of 2016  :D

 and E8 still have not finished shipping   ;D

Imagine creating an account just to say you have fictitious order to sell.

imagine the progress this gb might have had if the runner wasnt over ambitious and capped at 100 orders instead
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: ptiede on Wed, 08 May 2019, 07:05:15
wanna let go of my spot as well

goodluck with gb, hope dont turn out like last time.
Last time? All of exclusives group buys that he has run have turned out great.


look at e8
Notice how I said that exclusive ran? Jhoang ran the e8 and was in charge of shipping. Exclusive has ran 3 other successful groups buys in the mean time. I think he has earned our trust.
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: Frasqueira on Wed, 08 May 2019, 07:59:57
Iím looking for a spot E6.5 Poly or Red WKL. If you wanna sell, please contact me on Discord FRSiqueira#1145. ;)
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: Lockkkk on Wed, 08 May 2019, 09:42:10
Dont need said too much here ,i thinks who have already join this GB becoz they are love it and trust in exclusive

People have their own judgment, not gossip.
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: BAS1C on Thu, 09 May 2019, 11:27:48
wanna let go of my spot as well
goodluck with gb, hope dont turn out like last time.
wanna let go of my spot as well
goodluck with gb, hope dont turn out like last time.
Last time? All of exclusives group buys that he has run have turned out great.
look at e8
wanna let go of my spot as well
goodluck with gb, hope dont turn out like last time.
Last time? All of exclusives group buys that he has run have turned out great.
look at e8

Might want to check your facts before you try to tarnish someone's rep... Exclusive did not manage the shipping of the E8. They just managed the production. The 3 GB since the E8, the only ones Exclusive ran themselves have been exceptional as far as GB standards these days.
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: maddog111 on Sat, 11 May 2019, 07:49:52
wanna let go of my spot as well
goodluck with gb, hope dont turn out like last time.
wanna let go of my spot as well
goodluck with gb, hope dont turn out like last time.
Last time? All of exclusives group buys that he has run have turned out great.
look at e8
wanna let go of my spot as well
goodluck with gb, hope dont turn out like last time.
Last time? All of exclusives group buys that he has run have turned out great.
look at e8

Might want to check your facts before you try to tarnish someone's rep... Exclusive did not manage the shipping of the E8. They just managed the production. The 3 GB since the E8, the only ones Exclusive ran themselves have been exceptional as far as GB standards these days.

sory, my english not that good, what i mean was hope the handling oprocess dont turn out like e8, not tarnigh reputyation here
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: petamva on Sat, 11 May 2019, 10:24:28
looking for a pc spot   
hit me up here or reddit u/petamva or discord petamva#7456
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: Black.Samurai on Sun, 12 May 2019, 03:36:10
Hi everyone, I have to sell my spot for this GB
My order:
-E-Black case colorway
-Brass plate (sandblasted)
-Weight A (sandblasted brass)
-Weight B (E-Black Color)
-Name plate (pvd gold)

Please PM me here or on Reddit: u/BlackSamurai_VN.
Thanks You
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: mrkantz on Sun, 12 May 2019, 19:24:43
The amount of people giving up their spots after E opened this up to more people is disappointing...

Sent from my Pixel 2 XL using Tapatalk
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: phatty on Sun, 12 May 2019, 20:03:48
You're not wrong.

I'm looking to pick up a white e65 with brass!
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: DukeEsquire on Sun, 12 May 2019, 20:32:43
When did Exclusive open this up to more people?
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: phatty on Sun, 12 May 2019, 20:54:04
Hey hasn't. There's just been an influx of people exiting the buy

I want a white one to go with my PC one
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: 8six753o9 on Sun, 12 May 2019, 20:58:15
When did Exclusive open this up to more people?
On day 1 of the GB, there was suppose to be only 100 spots but over 200 filled out the form. So instead of cutting off at 100, heís fulfilling all the orders so technically, he opened up the GB.
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: excluisve on Sun, 12 May 2019, 21:51:51
Sorry for the delay

here is some updated :

plate and weight almost done ,now were doing top and bottom case .


(https://i.imgur.com/LtTj8or.jpg)

(https://i.imgur.com/wViXQFr.jpg)

(https://i.imgur.com/jlm8JuD.jpg)

(https://i.imgur.com/EM4fk5W.jpg)



Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: rossfromfriends on Sun, 12 May 2019, 22:45:56
Nice nice. Thanks for the update Exclusive


Sent from my iPhone using Tapatalk
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: Starius on Mon, 13 May 2019, 10:17:58
Even this kind of progress is exciting to see!
Very cool!
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: metalliccharles on Mon, 13 May 2019, 11:15:18
Can't wait for this.   :cool:
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: BAS1C on Mon, 13 May 2019, 11:51:55
Wow E! Looks amazing. I cannot wait :)  :thumb:

Thank you for always posting good updates, you are doing a great job with this GB :)
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: DisplayERROR on Mon, 13 May 2019, 14:55:23
Great to hear about the progress so far! Best of luck, can't wait to see the Poly and alu cases!
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: fleeceman on Tue, 14 May 2019, 16:34:17
Looking to buy a spare nameplate with the standard text and font.
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: Woahder on Tue, 14 May 2019, 20:05:20
WTS/WTT PC case spot (WK with block) for Dark Red case. Message me  :)

Edit: sold
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: petamva on Wed, 15 May 2019, 04:52:27
WTS/WTT PC case spot (WK with block) for Dark Red case. Message me  :)
I 've pmed you my discord is petamva#7456
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: LuiKang on Wed, 15 May 2019, 05:01:13
I'm much interested in a PC wkl in case someone wants to give up his/her spot.
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: lydhenry on Wed, 15 May 2019, 16:27:38
Looking for a spot E6.5 pc or E-White wk with block. If anyone want to sell, please contact me on Discord lydhenry#6205
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: gautema on Thu, 16 May 2019, 07:17:47
I'm also looking for a spot. Want wk with block and full plate. All colors is of interest.

Contact me at discord gautema#3542
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: Veats on Sat, 18 May 2019, 11:54:18
Looking to sell my Ewhite kit for retail if anyone is interested.
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: aroostercat on Sat, 18 May 2019, 11:58:59
Looking to sell my Ewhite kit for retail if anyone is interested.

Pm-ing :)
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: Starius on Sat, 18 May 2019, 12:09:25
It blows my mind to see so much wheeling and dealing going on here, before the boards are even made.
I know this happens with most group buys, to varying extents, but the sheer amount happening almost makes me question if exceeding the initial 100 buyer limitation was a good thing.

Itís really weird (and almost absurd) trying to explain how the collectable mechanical keyboard market works to ďregularĒ folks outside of the community. I find it fascinating to watch.

At any rate, itís looking like someone might have to make a spreadsheet just for all the buy/sell/trade going on for the E6.5.
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: metalliccharles on Sat, 18 May 2019, 15:42:06
It blows my mind to see so much wheeling and dealing going on here, before the boards are even made.
I know this happens with most group buys, to varying extents, but the sheer amount happening almost makes me question if exceeding the initial 100 buyer limitation was a good thing.

Itís really weird (and almost absurd) trying to explain how the collectable mechanical keyboard market works to ďregularĒ folks outside of the community. I find it fascinating to watch.

At any rate, itís looking like someone might have to make a spreadsheet just for all the buy/sell/trade going on for the E6.5.

It shouldn't be up to Exclusive at all to keep up with the spot selling.  And I bet he doesn't raise the limit next time.
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: Starius on Sat, 18 May 2019, 16:35:49
It blows my mind to see so much wheeling and dealing going on here, before the boards are even made.
I know this happens with most group buys, to varying extents, but the sheer amount happening almost makes me question if exceeding the initial 100 buyer limitation was a good thing.

Itís really weird (and almost absurd) trying to explain how the collectable mechanical keyboard market works to ďregularĒ folks outside of the community. I find it fascinating to watch.

At any rate, itís looking like someone might have to make a spreadsheet just for all the buy/sell/trade going on for the E6.5.

It shouldn't be up to Exclusive at all to keep up with the spot selling.  And I bet he doesn't raise the limit next time.

Yeah, I bet not.
I mean, I think the fact he did raise the limit was very nice of him but "Exclusive" is his very name! 
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: Rob27shred on Sat, 18 May 2019, 17:55:30
It blows my mind to see so much wheeling and dealing going on here, before the boards are even made.
I know this happens with most group buys, to varying extents, but the sheer amount happening almost makes me question if exceeding the initial 100 buyer limitation was a good thing.

Itís really weird (and almost absurd) trying to explain how the collectable mechanical keyboard market works to ďregularĒ folks outside of the community. I find it fascinating to watch.

At any rate, itís looking like someone might have to make a spreadsheet just for all the buy/sell/trade going on for the E6.5.

It shouldn't be up to Exclusive at all to keep up with the spot selling.  And I bet he doesn't raise the limit next time.

Yeah, I bet not.
I mean, I think the fact he did raise the limit was very nice of him but "Exclusive" is his very name!

Yeah the fact he opened up further orders because of high demand was a very nice gesture to the community from him IMHO. It's honestly starting to look like he shouldn't have the way so many people are trying to pull out. Which does cause more work for Exclusive by having to keep everything going to the right people. Honestly to everybody that is selling their spot just to sell it you should probably wait to recieve the board & sell it on here or r/mechmarket. If you have to sell because of an emergency to get cash now that is a different story & worthy of asking E to change up the info for your order. Otherwise it's honestly just piling extra work on a dude who was nice enough to accommodate all of us & has his hands full trying to deliver the highest quality product possible to us. :blank:
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: otanishock on Sat, 18 May 2019, 18:32:12
State of the Community:




Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: Vadurr on Sat, 18 May 2019, 19:36:19
State of the Community:

  • Limited spots GB → Complaints
  • Un-limited spots GB → Complaints
  • FCFS GB → Complaints
  • Raffle GB → Complaints
  • Auction GB → Complaints

Sad but true  :(
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: metalliccharles on Sat, 18 May 2019, 21:22:29
Human -> complain
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: dantambok on Sun, 19 May 2019, 03:27:57
Humans are dumb  :))
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: cldskt on Sun, 19 May 2019, 03:30:28
Humans are dumb  :))
no u
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: dantambok on Sun, 19 May 2019, 03:40:13
Humans are dumb  :))
no u

ken pls dont do this to me  :-[
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: beamingrobot on Tue, 21 May 2019, 07:23:02
Looking to let go / transfer my spot, hmu for details / check the Gsheet.
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: Cybee on Thu, 23 May 2019, 00:56:34
Need to let go of my E6.5 wkl poly spot. Please DM me on discord if you are interested :)
CybeeL1 #7893
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: Tekniqs on Thu, 23 May 2019, 02:28:53
looking to buy ewhite kit
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: LuiKang on Thu, 23 May 2019, 03:39:47
Need to let go of my E6.5 wkl poly spot. Please DM me on discord if you are interested :)
CybeeL1 #7893
Pm'ed.
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: DukeEsquire on Thu, 23 May 2019, 12:56:22
How are we looking on production? Are we still on track for early June?
Title: Re: E6.5 - 65% custom keyboard (Start manufacturing 8/ April)
Post by: vonswoopington on Sat, 25 May 2019, 21:56:17
Looking to transfer your e-white spot? PM me please.

Got one thanks!
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: excluisve on Sun, 26 May 2019, 23:50:44
New updated :

1.All fe case were done
2.pc and alu top case 80% finish
3.pc and alu bottom 60% finish

(https://i.imgur.com/yJwM8x6.jpg)

(https://i.imgur.com/VuglxH2.jpg)

(https://i.imgur.com/rkAIaaP.jpg)

Also i need to announce something about shipping ,it will delay to July or later.

before manufacturing someone tell me the bottom may have clearance issues so i have change to standard (19.05mm)

and test the gasket mount ,personally i am really love this

Before shipment i will post gasket mount typing video

Thanks all .
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: ItsAllen on Mon, 27 May 2019, 00:05:48
Thanks for the update!
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: jariss on Mon, 27 May 2019, 20:53:49
Looking good! Can't wait to see the gasket mount.
Kind of regretting getting a 2nd one in polycarbonate. They look fantastic. Especially since it's clear.
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: soveryscary on Mon, 27 May 2019, 22:27:58
Let me know if anyone is looking to let go of their PC spot.
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: yonghf on Tue, 28 May 2019, 00:42:04
Let me know if anyone is looking to let go of their PC spot.

Dropping you a PM
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: actualglacier on Tue, 28 May 2019, 06:23:56
the PC boards are looking so good, can't wait to see how this turns out.
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: Rob27shred on Tue, 28 May 2019, 07:23:41
Thanks for the update E! A little sad to hear about the delay, but I'd rather wait a bit more for a better product then get one that may or may not have issues. The gasket mounting is what originally drew me into look at this board & one of the bigger reasons I bought into the GB so that is particularly important to me. :thumb:
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: DisplayERROR on Tue, 28 May 2019, 11:01:25
Wow these look phenomenal. Thanks for the update! Take your time, like others have said, the quality is of utmost importance. Best of luck!
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: Sazuke9 on Tue, 28 May 2019, 11:37:31
Unfortunately, I need money for personal reasons. Trying to sell my polyc wk spot. Contact me on discord: Amino#5893
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: sirpensir on Tue, 28 May 2019, 20:44:30
Looking to sell my WKL PC spot with brass weight/nametag, feel free to PM me here or message me on discord at suds #7186 - thanks!
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: LuiKang on Wed, 29 May 2019, 01:08:16
Looking to sell my WKL PC spot with brass weight/nametag, feel free to PM me here or message me on discord at suds #7186 - thanks!
PM'ed.
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: iamjpan on Wed, 29 May 2019, 03:16:37
Looking for a pc wkl/hhkb spot. PM me on discord iamjpan#0926. Thanks!
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: Mcnos on Wed, 29 May 2019, 18:46:29
Looking for a spot myself.

PM me if possible.
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: yonghf on Thu, 30 May 2019, 00:27:11
Looking to transfer my spot, PM me if you're keen.

Winkey with Block
Brass Full-plate (PVD Rose Gold)
Brass Weight A (PVD Rose Gold)
Brass Weight B (PVD Rose Gold)
Brass Nametag (PVD Rose Gold) - No text/engraving
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: Lisinge on Sat, 01 June 2019, 11:25:54
Looking to transfer my two ordered boards. I've ordered double of the following:

* wk with block E white(+10$)
* full plate   Brass (pvd gold ) + 40$
* Weight A Brass (pvd gold ) + 45$
* Weight B Brass (pvd rose gold ) + 45$
* Nameplate Brass (pvd gold ) + 15$   Text: Micke https://www.dafont.com/wolf-in-the-city.font?text=Micke. Exclusive might let you change text if he hasn't started engraving yet?
* Extra nameplate Brass(sandblasted)+5$ text: blank

Total: $471.89

BTW; Does anyone know how this transfer is done safely for all parties involved?

Reach out to me here in PM or on discord: micke#3778
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: Sic_Alpha on Sat, 01 June 2019, 12:39:00
This is one of the first GBs I've been on. Is it normal for so many people to offload their spot?  Seems really weird to me.
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: Locnguyen1507 on Sat, 01 June 2019, 12:41:04
This is one of the first GBs I've been on. Is it normal for so many people to offload their spot?  Seems really weird to me.
:)) :)) :)) :)) :))
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: Sic_Alpha on Sat, 01 June 2019, 12:52:08
So is that a "it's perfectly normal"? Not sure...
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: Starius on Sat, 01 June 2019, 13:11:36
This is one of the first GBs I've been on. Is it normal for so many people to offload their spot?  Seems really weird to me.

It does always seem to happen for most keyboard group buys to some extent (not as much with keycap group buys, from my observation), but I do feel like itís been a ďabove averageĒ occurrence in this particular group buy so far. 
And maybe it just feels that way because it started happening in the early stages, but weíve still got a ways to go before we get these boards in our hot little hands. 
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: irneb on Sat, 01 June 2019, 13:29:57
If anybody is still wanting to let loose of their PC spot, preferably WKL feel free to contact me on discord!
irneb#7139
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: metalliccharles on Sat, 01 June 2019, 15:13:44
This is one of the first GBs I've been on. Is it normal for so many people to offload their spot?  Seems really weird to me.

It does always seem to happen for most keyboard group buys to some extent (not as much with keycap group buys, from my observation), but I do feel like itís been a ďabove averageĒ occurrence in this particular group buy so far. 
And maybe it just feels that way because it started happening in the early stages, but weíve still got a ways to go before we get these boards in our hot little hands.

I don't see the point in this discussion, but this was a larger than average GB with +200 participants.  Who really cares about a handful of people wanting to sell their spot?
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: Sic_Alpha on Sat, 01 June 2019, 15:30:17
I don't see the point in this discussion, but this was a larger than average GB with +200 participants.  Who really cares about a handful of people wanting to sell their spot?
Not sure if you're trying to be condescending, just posting to not contribute and complain, or what?  Who cares if I'm interested in knowing if this is normal?  I don't care if they actually do it...  As I stated,  just seems odd that so many would jump ship.  But that seems to have bothered you for some reason.  :(
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: metalliccharles on Sat, 01 June 2019, 15:40:51
I don't see the point in this discussion, but this was a larger than average GB with +200 participants.  Who really cares about a handful of people wanting to sell their spot?
Not sure if you're trying to be condescending, just posting to not contribute and complain, or what?  Who cares if I'm interested in knowing if this is normal?  I don't care if they actually do it...  As I stated,  just seems odd that so many would jump ship.  But that seems to have bothered you for some reason.  :(

Not being condescending. It seems that people are alluding to the GB going poorly, hence the "many" people leaving.  I don't think that's a fair narrative.
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: Sic_Alpha on Sat, 01 June 2019, 15:49:37
I don't have anything to gauge on whether it's going poorly; this is one of the first GBs I've been on.  I haven't had any kind of feeling that it's going poorly.

I think we just got crossed wires in what we were trying to communicate.  I wasn't sure how to take what you posted in your response.  Seems to be all good.  :thumb:
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: metalliccharles on Sat, 01 June 2019, 15:57:34
I don't have anything to gauge on whether it's going poorly; this is one of the first GBs I've been on.  I haven't had any kind of feeling that it's going poorly.

I think we just got crossed wires in what we were trying to communicate.  I wasn't sure how to take what you posted in your response.  Seems to be all good.  :thumb:

Aye, sorry for the grump, I didn't mean you in particular. It's just been mentioned several times in the thread. This is a great first GB.  Exclusive makes an excellent product.
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: Starius on Sat, 01 June 2019, 17:20:48
I don't have anything to gauge on whether it's going poorly; this is one of the first GBs I've been on.  I haven't had any kind of feeling that it's going poorly.

I think we just got crossed wires in what we were trying to communicate.  I wasn't sure how to take what you posted in your response.  Seems to be all good.  :thumb:

Aye, sorry for the grump, I didn't mean you in particular. It's just been mentioned several times in the thread. This is a great first GB.  Exclusive makes an excellent product.

Yeah, I don't think it's going poorly either, nor did I ever get that impression. Most people, when they state a reason for selling, say it is simply that they need money for personal reasons - not because they're dissatisfied with the group buy.   
If I were one to draw conclusions from this, I'd conclude that the group buy is so excellent that people were so eager to jump on board that they did so when they weren't in the best financial situation to do so. ;)
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: metalliccharles on Sat, 01 June 2019, 18:06:35
If I were one to draw conclusions from this, I'd conclude that the group buy is so excellent that people were so eager to jump on board that they did so when they weren't in the best financial situation to do so. ;)

I think this is absolutely what happened.
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: Visionaire on Sat, 01 June 2019, 22:26:09
I don't have anything to gauge on whether it's going poorly; this is one of the first GBs I've been on.  I haven't had any kind of feeling that it's going poorly.

I think we just got crossed wires in what we were trying to communicate.  I wasn't sure how to take what you posted in your response.  Seems to be all good.  :thumb:

There's always a certain % of people who want to sell their spot in any GB due to various reasons. Lost interest, financial issues, etc. As was said above, this particular GB is bigger than usual so that % means more individuals selling their spot. Everything's going fine with the run. Just takes time.
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: noahf on Sat, 01 June 2019, 23:22:00
I bought a second spot because i had fomo of the pc board. So im doubling down that these are going to be awesome top notch boards.
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: SeriousBG on Sun, 02 June 2019, 18:31:15
If anyone has a PC kit they wanna sell pm me or my discord is Yerp#2858
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: DukeEsquire on Sun, 02 June 2019, 19:11:53
For all the people who are "nervous" about people leaving the GB, don't forget that for every seller, there must be a buyer...
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: Sazuke9 on Mon, 03 June 2019, 11:33:15
Looking to sell my polyc wk spot. Contact me on discord: Amino#5893
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: excluisve on Wed, 05 June 2019, 04:56:43
Updated again:

(https://i.imgur.com/34RhVbX.jpg)

(https://i.imgur.com/tBGtnf6.jpg)

Prototype typing test - pc case with gasket mount

thanks to@Jinnnxxu (It feels very soft as he said )




Ps:next week will go factory again .
Title: E6.5 - 65% custom keyboard (manufacturing )
Post by: cldskt on Wed, 05 June 2019, 05:00:35
Updated again:

Show Image
(https://i.imgur.com/34RhVbX.jpg)


Show Image
(https://i.imgur.com/tBGtnf6.jpg)


Prototype typing test - pc case with gasket mount

thanks to@Jinnnxxu (It feels very soft as he said )




Ps:next week will go factory again .

What was the plate material used? And was it full plate or half plate?

Switches seemed a tad scratchy but sounds nice overall

EDIT: Images didnít load the first time. Seems like PC full plate was used.
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: TheMnBN on Wed, 05 June 2019, 08:00:42
Looking to sell my polyc wk spot. Contact me on discord: Amino#5893

sent you a pm.
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: lightprime on Wed, 05 June 2019, 09:52:26
Looking to swap my e-white wk with block for PC

PM if interested thanks
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: newbatthis on Wed, 05 June 2019, 16:25:16
Updated again:

Show Image
(https://i.imgur.com/34RhVbX.jpg)


Show Image
(https://i.imgur.com/tBGtnf6.jpg)


Prototype typing test - pc case with gasket mount

thanks to@Jinnnxxu (It feels very soft as he said )




Ps:next week will go factory again .

**** I want this already  :))
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: Lisinge on Wed, 05 June 2019, 19:08:31
Still looking to transfer my two ordered boards. I've ordered double of the following:

* wk with block
* E white(+10$)
* full plate   Brass (pvd gold ) + 40$
* Weight A Brass (pvd gold ) + 45$
* Weight B Brass (pvd rose gold ) + 45$
* Nameplate Brass (pvd gold ) + 15$   Text: Micke https://www.dafont.com/wolf-in-the-city.font?text=Micke. Exclusive might let you change text if he hasn't started engraving yet?
* Extra nameplate Brass(sandblasted)+5$ text: blank

Total: $471.89 per board
Willing to knock off $15 per board for a fast deal.

BTW; Does anyone know how this transfer is done safely for all parties involved?

Reach out to me here in PM or on discord: micke#3778
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: nickaster1 on Wed, 05 June 2019, 22:20:18
Updated again:

Show Image
(https://i.imgur.com/34RhVbX.jpg)


Show Image
(https://i.imgur.com/tBGtnf6.jpg)


Prototype typing test - pc case with gasket mount

thanks to@Jinnnxxu (It feels very soft as he said )




Ps:next week will go factory again .
What is going on with the bottoming out there? Sounds like the switches are stuck or something
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: Sazuke9 on Thu, 06 June 2019, 01:37:36
Still looking to sell my PC wk with right block GB spot.
Contact me on discord: Amino#5893
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: Blank on Sun, 09 June 2019, 08:15:22
Edit: Solved
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: 0sirisTV on Mon, 10 June 2019, 13:28:33
Looking for a winkeyless with block PC spot. Message me if you are looking to part ways with yours.
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: AzulM on Wed, 12 June 2019, 08:26:42
Looking to sell my WK block PC with rose gold brass plate/weight and 3 nameplates (rose gold, wathet, and e-black) for ~$30 less than I bought it for. Please contact me through discord if you're interested (Discord: azul#0001).
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: lightprime on Wed, 12 June 2019, 16:03:31
Looking to swap my e-white wk with block for PC. PM if interested, Thanks!
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: vicissitude on Wed, 12 June 2019, 17:57:14
Thanks for the update.

Nice progress.

Can't wait to meet my E6.5s.  :thumb:
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: aroostercat on Thu, 13 June 2019, 13:39:12
Still looking for a gb spot in grey wkl/wk with block

Half plate is a plus

Message me if you're interested in letting go your spot :)
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: fleeceman on Fri, 14 June 2019, 09:32:01
Can't wait for shipping! Can someone link me to exclusives discord please?

Sent from my Pixel using Tapatalk

Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: JubJubCity on Fri, 14 June 2019, 11:48:53
Can't wait for shipping! Can someone link me to exclusives discord please?

Sent from my Pixel using Tapatalk
I second this  ^-^
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: Egobean on Sat, 15 June 2019, 03:56:35
are these keyboards still available? i would love to purchase a black one with rose gold. and usb type c if possible
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: Lisinge on Sat, 15 June 2019, 07:01:51
Still looking to transfer the last one of my two ordered boards. I've ordered double of the following:

* wk with block
* E white(+10$)
* full plate   Brass (pvd gold ) + 40$
* Weight A Brass (pvd gold ) + 45$
* Weight B Brass (pvd rose gold ) + 45$
* Nameplate Brass (pvd gold ) + 15$   Text: Micke https://www.dafont.com/wolf-in-the-city.font?text=Micke. Exclusive might let you change text if he hasn't started engraving yet?
* Extra nameplate Brass(sandblasted)+5$ text: blank

Total: $471.89 per board
Willing to knock off $30 per board for a fast deal.

Reach out to me here in PM or on discord: micke#3778
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: gridds on Sat, 15 June 2019, 10:47:07
On the hunt for a grey slot, drop me a PM  :D
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: Bryan on Sat, 15 June 2019, 15:06:14
Any update on production? Getting anxious, this will be my first group buy board!
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: Auxo on Sat, 15 June 2019, 15:28:09
Any update on production? Getting anxious, this will be my first group buy board!

General rule of thumb is, if theres no update, then there isnt anything new to report. We can just assume that it's still going through the manufacturing process :)
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: Visionaire on Sat, 15 June 2019, 18:56:11
Any update on production? Getting anxious, this will be my first group buy board!

Chatted with Exclusive this week. All is going well. Finishing up some CNC. Lots of boards in this run, so it takes a while, but all is on track.
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: Egobean on Sun, 16 June 2019, 14:12:04
is anyone selling a black red? i am interested please pm
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: SeriousBG on Sun, 16 June 2019, 15:54:06
I just got a board from the Vietnam group buy is there anyway that I can get updates for that one?
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: excluisve on Tue, 18 June 2019, 10:01:31
Any update on production? Getting anxious, this will be my first group buy board!
No,worry still in producation
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: excluisve on Tue, 18 June 2019, 10:02:09
I just got a board from the Vietnam group buy is there anyway that I can get updates for that one?
Shot me pm on discord or email .
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: excluisve on Tue, 18 June 2019, 10:03:16
All CNC work will done on next Monday
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: ptiede on Tue, 18 June 2019, 10:27:21
All CNC work will done on next Monday

 :eek: :eek: :D
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: Visionaire on Tue, 18 June 2019, 20:50:08
All CNC work will done on next Monday

Woohoo!
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: wellbeing44 on Wed, 19 June 2019, 01:55:43
All CNC work will done on next Monday
:thumb: And anodizing after that?
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: excluisve on Wed, 19 June 2019, 22:17:35
Updated again:

Show Image
(https://i.imgur.com/34RhVbX.jpg)


Show Image
(https://i.imgur.com/tBGtnf6.jpg)


Prototype typing test - pc case with gasket mount

thanks to@Jinnnxxu (It feels very soft as he said )




Ps:next week will go factory again .

Video fixed. last the software get some issue so this time use another one
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: LuiKang on Thu, 20 June 2019, 05:39:47
Updated again:

Show Image
(https://i.imgur.com/34RhVbX.jpg)


Show Image
(https://i.imgur.com/tBGtnf6.jpg)


Prototype typing test - pc case with gasket mount

thanks to@Jinnnxxu (It feels very soft as he said )




Ps:next week will go factory again .

Video fixed. last the software get some issue so this time use another one

@excluisve What did you fix actually? Those are the same YouTube videos and I never had an issue with them. Or did you mean something else?
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: crosscutgymnast on Thu, 20 June 2019, 09:01:00
Interested into buying a PC spot from someone looking to part with his.

Message me on discord (crosscutgymnast#1408) or here
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: Bryan on Thu, 20 June 2019, 12:26:23
@excluisve What did you fix actually? Those are the same YouTube videos and I never had an issue with them. Or did you mean something else?

I noticed the audio was out of sync with the video in the previous type tests. In these videos it appears to be in sync.
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: LuiKang on Thu, 20 June 2019, 17:25:21
@excluisve What did you fix actually? Those are the same YouTube videos and I never had an issue with them. Or did you mean something else?

I noticed the audio was out of sync with the video in the previous type tests. In these videos it appears to be in sync.
Ah I see. Thx :thumb:
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: Oscar2177 on Sat, 29 June 2019, 11:04:27
I haven't been keeping up much with the GB since I payed for the invoice. What is the current status?
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: excluisve on Sat, 29 June 2019, 11:41:23
I haven't been keeping up much with the GB since I payed for the invoice. What is the current status?
All cnc works done ,today i just get all stuff
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: cldskt on Sat, 29 June 2019, 12:25:54
I haven't been keeping up much with the GB since I payed for the invoice. What is the current status?
All cnc works done ,today i just get all stuff
NE photos avail
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: Auxo on Sat, 29 June 2019, 12:31:16
I haven't been keeping up much with the GB since I payed for the invoice. What is the current status?
All cnc works done ,today i just get all stuff

Thanks for the update!!
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: vonswoopington on Sat, 29 June 2019, 12:40:23
I haven't been keeping up much with the GB since I payed for the invoice. What is the current status?
All cnc works done ,today i just get all stuff
Awesome! Does that mean anno is completed as well?
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: Rob27shred on Sat, 29 June 2019, 14:37:30
I haven't been keeping up much with the GB since I payed for the invoice. What is the current status?
All cnc works done ,today i just get all stuff

Getting hyped! Thanks for the update! :thumb:
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: dk4one on Mon, 01 July 2019, 09:17:54
Interested in an e-white with arrow blocker if anyone wants to part. Discord is Bazinga#4249
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: Wongstongs on Thu, 04 July 2019, 11:03:41
Any update on the polycarb kits?
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: Egobean on Thu, 04 July 2019, 14:57:43
still interested in buy one prefer a black one with rosa gold but if anyone is selling one feel free to message me on here or discord EgoBean#9483
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: damagepoint on Thu, 04 July 2019, 18:50:24
Want to transfer my Grey WKL with Block spot for less than i paid (I put a lot of extras) SOLD
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: aroostercat on Thu, 04 July 2019, 18:54:22
Want to transfer my Grey WKL with Block spot for less than i paid (I put a lot of extras)

pming!
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: nickaster1 on Fri, 05 July 2019, 01:16:48
Anymore updates?
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: excluisve on Fri, 05 July 2019, 09:11:13
Anymore updates?
No worry,i am doing QC may still need a week
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: Auxo on Fri, 05 July 2019, 11:00:54
Anymore updates?
No worry,i am doing QC may still need a week

Take your time man, much rather wait and get all the issues sorted before it ships out than after  :thumb:
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: excluisve on Fri, 05 July 2019, 12:08:00
Anymore updates?
No worry,i am doing QC may still need a week

Take your time man, much rather wait and get all the issues sorted before it ships out than after  :thumb:
I am doing QC for raw CNCed alu before it goes for anodization/finishing
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: Auxo on Fri, 05 July 2019, 17:19:03
Anymore updates?
No worry,i am doing QC may still need a week

Take your time man, much rather wait and get all the issues sorted before it ships out than after  :thumb:
I am doing QC for raw CNCed alu before it goes for anodization/finishing

Awesome thanks for the updates! Super looking forward to seeing the finished product :)

PC is gonna be najs
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: ItsAllen on Tue, 09 July 2019, 22:59:48
Any possible teaser pics? 👀
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: cldskt on Tue, 09 July 2019, 23:03:42
Any possible teaser pics?

Exclusive said not yet on Discord, possibly another week or so.
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: JubJubCity on Tue, 09 July 2019, 23:15:09
Any possible teaser pics?

Exclusive said not yet on Discord, possibly another week or so.
would it be possible to provide the discord channel?
Title: E6.5 - 65% custom keyboard (manufacturing )
Post by: cldskt on Tue, 09 July 2019, 23:37:11
Any possible teaser pics?

Exclusive said not yet on Discord, possibly another week or so.
would it be possible to provide the discord channel?

-snip-
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: JubJubCity on Wed, 10 July 2019, 11:12:30
Any possible teaser pics?

Exclusive said not yet on Discord, possibly another week or so.
would it be possible to provide the discord channel?


Thank you very much
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: romevi on Thu, 11 July 2019, 16:41:49
Dang it. Wrong thread. I'm dumb.
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: Egobean on Thu, 11 July 2019, 19:18:48
i seriously cant wait for these to go on sale when people decide they need the money more then the keyboard lol Hurry UP!!
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: ogWalker on Sun, 14 July 2019, 07:58:39
Looking for a wkl e-white spot, feel free to message me on discord walker#1337
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: soveryscary on Sun, 14 July 2019, 19:39:30
Any updates on the PC boards?
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: mrkantz on Mon, 15 July 2019, 00:40:54
The PC boards should take as long as the aluminum. We still have anodized weights/tags/plates.

Sent from my Pixel 2 XL using Tapatalk

Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: ever9415 on Mon, 15 July 2019, 19:13:37
Please update your progress.
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: excluisve on Tue, 16 July 2019, 08:47:06
Please update your progress.
Sry for delay .i do all work myself so maybe not update in time

Will take some pic late.
1. Anodizing work is done (alu case)
2.e white case and e black ready take to do finish next fews days
3.pc and alu case shipping same time .
4.end of this month will start shipping


By the way ,start now not accept exchange due to much works and it easy messed up, so you can exchange it when you get

board in hand. 

Thansk all!
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: Wongstongs on Tue, 16 July 2019, 09:30:57
Thanks for the update!
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: eyedrop on Tue, 16 July 2019, 10:52:38
Thanks for the update, exclusive.

What about the FE?  Is that shipping at the end of the month as well?
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: dantambok on Tue, 16 July 2019, 11:17:34
nice to hear this will start shipping soon! :)
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: soveryscary on Tue, 16 July 2019, 17:43:30
Thanks for the update! Excited for this board.
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: ItsAllen on Wed, 17 July 2019, 00:35:48
Very exciting news.
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: excluisve on Thu, 18 July 2019, 08:48:07
Some pictures:


(https://i.imgur.com/9Ri4Vup.jpg)


(https://i.imgur.com/WF6wgNu.jpg)

(https://i.imgur.com/qPzptJO.jpg)

(https://i.imgur.com/sGuQgLI.jpg)
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: Visionaire on Thu, 18 July 2019, 09:03:28
Thanks for sharing E!

It's happening!! Brace yourselves, everyone... E6.5 is coming!
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: Starius on Thu, 18 July 2019, 09:40:55
Some pictures:


Show Image
(https://i.imgur.com/9Ri4Vup.jpg)



Show Image
(https://i.imgur.com/WF6wgNu.jpg)


Show Image
(https://i.imgur.com/qPzptJO.jpg)


Show Image
(https://i.imgur.com/sGuQgLI.jpg)



Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: foo4542 on Thu, 18 July 2019, 19:34:57
that red is so nice. My Jamůn is sooo ready.
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: dannyny on Sat, 20 July 2019, 11:55:25
is there any more for sale?
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: Rob27shred on Sat, 20 July 2019, 12:07:34
that red is so nice. My Jamůn is sooo ready.

Same plan here! I went with the dark red WKL case, brass plate, e-white & e-black weight. & a e-white & e-black name tag to match Jamon with the Jamonelties & Pata Negra kit. Although I got GMK Oblivion on it's way (Git base, Oblivion cadet, Hagoromo cadet alphas) on order too which I bet will look killer with the dark red case also!
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: Auxo on Sat, 20 July 2019, 20:42:57
is there any more for sale?

Nope, group buy closed
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: sapphyr on Sun, 21 July 2019, 11:16:25
is there any more for sale?

Nope, group buy closed

Were there going to be any extras or that was it?
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: eyedrop on Sun, 21 July 2019, 11:30:03
is there any more for sale?

Nope, group buy closed

Were there going to be any extras or that was it?
Exclusive doesn't usually do extras.

Sent from my Pixel 3 using Tapatalk

Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: vncsnty on Mon, 22 July 2019, 10:18:39
Thanks for the update. I am excited.

Does exclusive has discord? It's easier for me to check updates there.
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: foo4542 on Tue, 23 July 2019, 22:26:12
Thanks for the update. I am excited.

Does exclusive has discord? It's easier for me to check updates there.
Everyone is excited  ;)
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: Visionaire on Wed, 24 July 2019, 15:55:54
Thanks for the update. I am excited.

Does exclusive has discord? It's easier for me to check updates there.

https://discord.gg/MNSMPP
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: 8six753o9 on Wed, 24 July 2019, 17:47:53
Exclusive is pretty good at adding updates here and Discord so you arenít missing out.
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: jimboytacos on Fri, 26 July 2019, 00:23:49
Just wanted to ask if anyone has a spot they'd like to give up. I would love to join this GB. Let me know what options you selected. Thanks :)
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: tipsyboo on Fri, 26 July 2019, 09:23:01
Just wanted to ask if anyone has a spot they'd like to give up. I would love to join this GB. Let me know what options you selected. Thanks :)
Exclusive no longer allows trading spots.
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: excluisve on Tue, 30 July 2019, 11:28:26
Updated:

1.Today i just take all e white case back and the mao case

2.all brass parts wait to do pvd finish

3.Also i have send a case to my friend for check .


(https://i.imgur.com/ndPOP6A.jpg)

(https://i.imgur.com/JDknhzz.jpg)

(https://i.imgur.com/J3R1dvI.jpg)

(https://i.imgur.com/jzvyVwJ.jpg)

Thanks all

Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: soveryscary on Tue, 30 July 2019, 12:14:57
That looks so nice. I am so excited for this board! Any estimate on ship dates?
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: SolidCactus on Tue, 30 July 2019, 12:23:38
Wow that blue looks awesome! Very excited for this one to ship out!
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: Starius on Tue, 30 July 2019, 12:51:26
Warning: Anticipation levels rising!
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: Mcnos on Tue, 30 July 2019, 14:13:43
Updated:

1.Today i just take all e white case back and the mao case

2.all brass parts wait to do pvd finish

3.Also i have send a case to my friend for check .



Thanks all


Was there an issue with the white and MAO?
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: tunadesu on Tue, 30 July 2019, 14:49:38
Updated:

1.Today i just take all e white case back and the mao case

2.all brass parts wait to do pvd finish

3.Also i have send a case to my friend for check .



Thanks all


Was there an issue with the white and MAO?

Maybe he means he took em back from the factory, like those are the ones that are all done?
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: Jinnnxxu on Wed, 31 July 2019, 12:21:09
Hey guys, I tested this light blue E6.5 for exclusive.
This color so nice with SHOKO and I like that LED and different color alu weight.
At the same time, the gasket is better than top mount.
And he made some stickers as a gift, I hope everyone will fall in love with E6.5!   :thumb:

At last, more pics i posted on ZF China: https://www.zfrontier.com/post/detail/15298
There is an unboxing video with Chinese, hope u can enjoy it!
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: excluisve on Thu, 01 August 2019, 10:02:57
Some new for E black

today just check the e white case and e black case ,e white is fine but e black turn out not so good

so  i have decide to change e black to Anode black (only top and bottom)if you have buy the e black pay attention on this

news   (9 orders )

thanks !
Ps: On Saturday,will start to do pvd finish .
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: Choppersuey on Thu, 01 August 2019, 10:50:24
Thatís a bit disappointing to hear. I chose e-black because I read that e-coating is supposedly better than anodizing. Do we get the additional cost for e-black refunded or can we change color?
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: excluisve on Thu, 01 August 2019, 10:54:01
Thatís a bit disappointing to hear. I chose e-black because I read that e-coating is supposedly better than anodizing. Do we get the additional cost for e-black refunded or can we change color?
Pm me on discord
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: mrkantz on Thu, 01 August 2019, 12:15:26
Does this just effect the case or the other parts too? I have e-black weight/plate/name tag do I need to change it?
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: Sic_Alpha on Thu, 01 August 2019, 12:40:25
Does this just effect the case or the other parts too? I have e-black weight/plate/name tag do I need to change it?

I replied to his email asking to have all parts I ordered in e-black switched to e-white.  Will see what he says.
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: Visionaire on Thu, 01 August 2019, 12:41:00
Hey guys, I tested this light blue E6.5 for exclusive.
This color so nice with SHOKO and I like that LED and different color alu weight.
At the same time, the gasket is better than top mount.
And he made some stickers as a gift, I hope everyone will fall in love with E6.5!   :thumb:

At last, more pics i posted on ZF China: https://www.zfrontier.com/post/detail/15298
There is an unboxing video with Chinese, hope u can enjoy it!


Great content. Thanks for sharing!
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: SolidCactus on Thu, 01 August 2019, 12:49:17
All,

I ordered an eBlack case. I pinged Exclusive on Discord and he was happy to let me swap colors!

It's a shame that the eBlack didn't turn out how expected but I'm pleased I got the chance to swap  :thumb:
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: Sic_Alpha on Thu, 01 August 2019, 12:50:34
I replied to the email, should we contact via Discord instead?
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: SolidCactus on Thu, 01 August 2019, 12:53:03
I replied to the email, should we contact via Discord instead?

I pinged him a DM on Discord and got it sorted that way.
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: Egobean on Thu, 01 August 2019, 23:22:33
what was wrong with the Eblack case? why did everyone switch?
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: Sic_Alpha on Thu, 01 August 2019, 23:37:13
what was wrong with the Eblack case? why did everyone switch?

Exclusive axed it because the product didn't pass QC.  Those of us who ordered e-black now have to select from the options given.
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: Egobean on Tue, 06 August 2019, 22:34:45
when do they ship?
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: dantambok on Tue, 06 August 2019, 22:37:00
My serika is ready for itís new home!

Also, about shipping.. how much will you be declaring for customs?
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: ever9415 on Wed, 07 August 2019, 01:01:12
I am eagerly waiting.
Is the issue of E-Black being resolved?
When will the delivery start?
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: MatthewPham on Fri, 09 August 2019, 22:05:57
My serika is ready for itís new home!

Also, about shipping.. how much will you be declaring for customs?


$60 according to exclusive on discord
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: Egobean on Tue, 13 August 2019, 22:41:59
around what date are people suppose to be receiving their keyboard? im interested if anyone wants to sell when they receive it.
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: dantambok on Tue, 13 August 2019, 23:21:03
around what date are people suppose to be receiving their keyboard? im interested if anyone wants to sell when they receive it.

Best guess, mid to late september
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: dantambok on Thu, 15 August 2019, 00:02:02
Just read on discord, boards will start shipping on sunday! Hooray!
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: Peiweisgreat on Thu, 15 August 2019, 01:11:53
Just read on discord, boards will start shipping on sunday! Hooray!

Best thing I read all day. Not a big fan of the layout, but I can't keep missing exclusive's boards.
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: Rob27shred on Sat, 17 August 2019, 07:39:58
Just read on discord, boards will start shipping on sunday! Hooray!

Oh man, HYPE! Can't wait to get mine & see how everyone else builds theirs up!
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: excluisve on Sun, 18 August 2019, 09:55:06
Updated:

hey friends ,i am plan to start ship the E6.5 .

i will post the shipping orders list tomorrow .as we said before ,will shipping frist group (1-100)

it need spend three times ship out first 100 orders .

Check you orders here since somone already transfer their spot

https://docs.google.com/spreadsheets/d/1_XBfjVO2GSS7VHBJxmqgLTFnqTmt0sZhLu4E1zQHBhw/edit?usp=sharing (https://docs.google.com/spreadsheets/d/1_XBfjVO2GSS7VHBJxmqgLTFnqTmt0sZhLu4E1zQHBhw/edit?usp=sharing)

Thanks all !


Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: Rob27shred on Sun, 18 August 2019, 09:57:09
Updated:

hey friends ,i am plan to start ship the E6.5 .

i will post the shipping orders list tomorrow ,as we said before will shipping frist group (1-100)

it need spend three times ship out first 100 orders .

Check you orders here since somone already transfer their spot

https://docs.google.com/spreadsheets/d/1_XBfjVO2GSS7VHBJxmqgLTFnqTmt0sZhLu4E1zQHBhw/edit?usp=sharing (https://docs.google.com/spreadsheets/d/1_XBfjVO2GSS7VHBJxmqgLTFnqTmt0sZhLu4E1zQHBhw/edit?usp=sharing)

Thanks all !




Awesome news! I won't be in the first batch, but super excited to hear mine will be shipping sooner than later. Thanks for the update E!
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: jimboytacos on Mon, 19 August 2019, 02:42:52
Updated:

hey friends ,i am plan to start ship the E6.5 .

i will post the shipping orders list tomorrow .as we said before ,will shipping frist group (1-100)

it need spend three times ship out first 100 orders .

Check you orders here since somone already transfer their spot

https://docs.google.com/spreadsheets/d/1_XBfjVO2GSS7VHBJxmqgLTFnqTmt0sZhLu4E1zQHBhw/edit?usp=sharing (https://docs.google.com/spreadsheets/d/1_XBfjVO2GSS7VHBJxmqgLTFnqTmt0sZhLu4E1zQHBhw/edit?usp=sharing)

Thanks all !




Do you have any extra cases? I'd love to buy one! Please PM me if you do.
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: wellbeing44 on Mon, 19 August 2019, 06:23:20
Updated:

hey friends ,i am plan to start ship the E6.5 .

i will post the shipping orders list tomorrow .as we said before ,will shipping frist group (1-100)

it need spend three times ship out first 100 orders .

Check you orders here since somone already transfer their spot

https://docs.google.com/spreadsheets/d/1_XBfjVO2GSS7VHBJxmqgLTFnqTmt0sZhLu4E1zQHBhw/edit?usp=sharing (https://docs.google.com/spreadsheets/d/1_XBfjVO2GSS7VHBJxmqgLTFnqTmt0sZhLu4E1zQHBhw/edit?usp=sharing)

Thanks all !



I look forward to getting my invoice and board! Hope the shipping goes smoothly for you :thumb:
Title: Re: E6.5 - 65% custom keyboard (manufacturing )
Post by: BAS1C on Mon, 19 August 2019, 14:51:34
Updated:

hey friends ,i am plan to start ship the E6.5 .

i will post the shipping orders list tomorrow .as we said before ,will shipping frist group (1-100)

it need spend three times ship out first 100 orders .

Check you orders here since somone already transfer their spot

https://docs.google.com/spreadsheets/d/1_XBfjVO2GSS7VHBJxmqgLTFnqTmt0sZhLu4E1zQHBhw/edit?usp=sharing (https://docs.google.com/spreadsheets/d/1_XBfjVO2GSS7VHBJxmqgLTFnqTmt0sZhLu4E1zQHBhw/edit?usp=sharing)

Thanks all !




Excellent :) Very excited to be part of the first batch :)
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: excluisve on Mon, 19 August 2019, 21:16:33
Shipping group 1:

(https://i.imgur.com/aLndELC.png)

If you have two or three spots i will jump in next time ship together .


please check you order on https://docs.google.com/spreadsheets/d/1_XBfjVO2GSS7VHBJxmqgLTFnqTmt0sZhLu4E1zQHBhw/edit?usp=sharing (https://docs.google.com/spreadsheets/d/1_XBfjVO2GSS7VHBJxmqgLTFnqTmt0sZhLu4E1zQHBhw/edit?usp=sharing)

then send me shipping details like this format

Geekhack ID:
Paypal     ID:
Real name :
phone call :
address :  country -city/status -street
zip code :

I would rather send message to me on discord(Exclusive#8666) or PM me on here

Group 2 will ship 30 orders, the rest of is group 3.

Estimate shipping fee :
                    asia - 40$ usa - 48$  Europe -Australia- 55$


Extra oring price $12  if you need extra i will add price in shipping invoice

Thanks !

                           
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: eyedrop on Mon, 19 August 2019, 23:35:09
What about Founder's Edition, exclusive?
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: Alcacergarcia on Tue, 20 August 2019, 16:57:23
When will the shipping for orders after first 100 starts?
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: Rob27shred on Tue, 20 August 2019, 17:01:10
Shipping group 1:

Show Image
(https://i.imgur.com/aLndELC.png)


If you have two or three spots i will jump in next time ship together .


please check you order on https://docs.google.com/spreadsheets/d/1_XBfjVO2GSS7VHBJxmqgLTFnqTmt0sZhLu4E1zQHBhw/edit?usp=sharing (https://docs.google.com/spreadsheets/d/1_XBfjVO2GSS7VHBJxmqgLTFnqTmt0sZhLu4E1zQHBhw/edit?usp=sharing)

then send me shipping details like this format

Geekhack ID:
Paypal     ID:
Real name :
phone call :
address :  country -city/status -street
zip code :

I would rather send message to me on discord(Exclusive#8666) or PM me on here

Group 2 will ship 30 orders, the rest of is group 3.

Estimate shipping fee :
                    asia - 40$ usa - 48$  Europe -Australia- 55$


Extra oring price $12  if you need extra i will add price in shipping invoice

Thanks !

                         

How do I change the name on the order check list? It's only showing jcwleo's order details for me.
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: donut_sauce on Tue, 20 August 2019, 17:09:25
Shipping group 1:

Show Image
(https://i.imgur.com/aLndELC.png)


If you have two or three spots i will jump in next time ship together .


please check you order on https://docs.google.com/spreadsheets/d/1_XBfjVO2GSS7VHBJxmqgLTFnqTmt0sZhLu4E1zQHBhw/edit?usp=sharing (https://docs.google.com/spreadsheets/d/1_XBfjVO2GSS7VHBJxmqgLTFnqTmt0sZhLu4E1zQHBhw/edit?usp=sharing)

then send me shipping details like this format

Geekhack ID:
Paypal     ID:
Real name :
phone call :
address :  country -city/status -street
zip code :

I would rather send message to me on discord(Exclusive#8666) or PM me on here

Group 2 will ship 30 orders, the rest of is group 3.

Estimate shipping fee :
                    asia - 40$ usa - 48$  Europe -Australia- 55$


Extra oring price $12  if you need extra i will add price in shipping invoice

Thanks !

                         

How do I change the name on the order check list? It's only showing jcwleo's order details for me.
If you make a copy of the spreadsheet then you'll have permissions to edit that one
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: Rob27shred on Wed, 21 August 2019, 11:02:02
Shipping group 1:

Show Image
(https://i.imgur.com/aLndELC.png)


If you have two or three spots i will jump in next time ship together .


please check you order on https://docs.google.com/spreadsheets/d/1_XBfjVO2GSS7VHBJxmqgLTFnqTmt0sZhLu4E1zQHBhw/edit?usp=sharing (https://docs.google.com/spreadsheets/d/1_XBfjVO2GSS7VHBJxmqgLTFnqTmt0sZhLu4E1zQHBhw/edit?usp=sharing)

then send me shipping details like this format

Geekhack ID:
Paypal     ID:
Real name :
phone call :
address :  country -city/status -street
zip code :

I would rather send message to me on discord(Exclusive#8666) or PM me on here

Group 2 will ship 30 orders, the rest of is group 3.

Estimate shipping fee :
                    asia - 40$ usa - 48$  Europe -Australia- 55$


Extra oring price $12  if you need extra i will add price in shipping invoice

Thanks !

                         

How do I change the name on the order check list? It's only showing jcwleo's order details for me.
If you make a copy of the spreadsheet then you'll have permissions to edit that one

Gotcha, thanks for the heads up!
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: Kevadu on Wed, 21 August 2019, 20:56:54
How long will the shipping take?  I'm planning on moving by the end of September so I'm honestly not sure whether to use my current or future address...
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: BAS1C on Fri, 23 August 2019, 11:30:44
How long will the shipping take?  I'm planning on moving by the end of September so I'm honestly not sure whether to use my current or future address...

If i were you i'd ship to a friend's place just in case, or work, or set up a PO box or something with mail forwarding. It is shipping via DHL, so you can always request them to change address for delivery also...
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: mrpetrov on Fri, 23 August 2019, 19:14:12
PM sent with shipping confirmation, but tried to reach you on discord and for the life of me can't find you...maybe user error on my part I guess!
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: Rob27shred on Fri, 23 August 2019, 19:30:51
Shipping group 1:

Show Image
(https://i.imgur.com/aLndELC.png)


If you have two or three spots i will jump in next time ship together .


please check you order on https://docs.google.com/spreadsheets/d/1_XBfjVO2GSS7VHBJxmqgLTFnqTmt0sZhLu4E1zQHBhw/edit?usp=sharing (https://docs.google.com/spreadsheets/d/1_XBfjVO2GSS7VHBJxmqgLTFnqTmt0sZhLu4E1zQHBhw/edit?usp=sharing)

then send me shipping details like this format

Geekhack ID:
Paypal     ID:
Real name :
phone call :
address :  country -city/status -street
zip code :

I would rather send message to me on discord(Exclusive#8666) or PM me on here

Group 2 will ship 30 orders, the rest of is group 3.

Estimate shipping fee :
                    asia - 40$ usa - 48$  Europe -Australia- 55$


Extra oring price $12  if you need extra i will add price in shipping invoice

Thanks !

                         

Ok if I am understanding this right the first wave to ship out will only include the boards going to the 16 listed people. Then the second wave to ship out will only include 30 boards that go to the people who got in earliest I assume? After those boards have all been shipped out then the third wave will begin & include the majority of peoples orders? Also how soon do you need our info if we will most likely be in the third wave of shipping?
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: clik_clak on Fri, 23 August 2019, 20:02:20


Ok if I am understanding this right the first wave to ship out will only include the boards going to the 16 listed people. Then the second wave to ship out will only include 30 boards that go to the people who got in earliest I assume? After those boards have all been shipped out then the third wave will begin & include the majority of peoples orders? Also how soon do you need our info if we will most likely be in the third wave of shipping?

I'm guessing he's still waiting for a bunch of people to PM him shipping info. My order was in the mid 80's and he told me mine would be shipping out in the second wave.
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: excluisve on Fri, 23 August 2019, 20:38:55
Please dont need pm me if you not on the shipping list

thanks ,
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: excluisve on Fri, 23 August 2019, 20:43:54
Shipping group 2:

(https://i.imgur.com/ZEgHyPw.png)

If you have two or three spots i will jump in next time ship together .


please check you order on https://docs.google.com/spreadsheets/d/1_XBfjVO2GSS7VHBJxmqgLTFnqTmt0sZhLu4E1zQHBhw/edit?usp=sharing

then send me shipping details like this format

Geekhack ID:
Paypal     ID:
Real name :
phone call :
address :  country -city/status -street
zip code :

I would rather send message to me on discord(Exclusive#8666) or PM me on here

Group 2 will ship 30 orders, the rest of is group 3.

Estimate shipping fee :
                    asia - 40$ usa - 48$  Europe -Australia- 55$

Extra oring price $12  if you need extra i will add price in shipping invoice

Thanks
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: excluisve on Fri, 23 August 2019, 20:49:13
All pm and email i have received however, i cant reply everyone .

When i need those info i will check that but it more diffcult to find exactly info

so plz dont pm me if you are not on shipping list .

check the pictures if you are on there then pm me again
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: ever9415 on Fri, 23 August 2019, 23:24:14
Shipping group 2:

Show Image
(https://i.imgur.com/ZEgHyPw.png)


If you have two or three spots i will jump in next time ship together .


please check you order on https://docs.google.com/spreadsheets/d/1_XBfjVO2GSS7VHBJxmqgLTFnqTmt0sZhLu4E1zQHBhw/edit?usp=sharing

then send me shipping details like this format

Geekhack ID:
Paypal     ID:
Real name :
phone call :
address :  country -city/status -street
zip code :

I would rather send message to me on discord(Exclusive#8666) or PM me on here

Group 2 will ship 30 orders, the rest of is group 3.

Estimate shipping fee :
                    asia - 40$ usa - 48$  Europe -Australia- 55$

Extra oring price $12  if you need extra i will add price in shipping invoice

Thanks


The Participant on the Order Check page does not change.
My Order information is not available.
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: PhreshPrinceOfChinaTown on Fri, 23 August 2019, 23:59:02
The Participant on the Order Check page does not change.
My Order information is not available.

Download it or make your own copy.
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: gasp on Mon, 26 August 2019, 11:15:33
Just got one in for a client! PC, PC plate, rose gold weight and nameplate.

(https://i.imgur.com/3v1MlBM.jpg)

(https://i.imgur.com/M7pkgQb.jpg)

She's a beaut <3
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: Hodgeman on Mon, 26 August 2019, 11:25:26
tfw you didnít realize you were group 1 :scoot:
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: Mcnos on Mon, 26 August 2019, 13:29:53
Just got one in for a client! PC, PC plate, rose gold weight and nameplate.

Show Image
(https://i.imgur.com/3v1MlBM.jpg)


Show Image
(https://i.imgur.com/M7pkgQb.jpg)


She's a beaut <3

Nice desk.
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: fleeceman on Mon, 26 August 2019, 15:22:12
Just got one in for a client! PC, PC plate, rose gold weight and nameplate.

Show Image
(https://i.imgur.com/3v1MlBM.jpg)


Show Image
(https://i.imgur.com/M7pkgQb.jpg)


She's a beaut <3

Looks like a wall to me
Nice desk.
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: BAS1C on Mon, 26 August 2019, 18:27:18
Just gonna leave this here...
Thanks E, you are the man.

Album:  https://imgur.com/a/qB5sU0D (https://imgur.com/a/qB5sU0D)

(https://i.imgur.com/ezW34Wm.jpg)
(https://i.imgur.com/xLEExTt.jpg)
(https://i.imgur.com/10AmMs4.jpg)
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: Visionaire on Mon, 26 August 2019, 18:43:33
Wew, can't wait to see it built!
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: Mcnos on Tue, 27 August 2019, 18:50:47
Just gonna leave this here...
Thanks E, you are the man.

Album:  https://imgur.com/a/qB5sU0D (https://imgur.com/a/qB5sU0D)

Show Image
(https://i.imgur.com/ezW34Wm.jpg)

Show Image
(https://i.imgur.com/xLEExTt.jpg)

Show Image
(https://i.imgur.com/10AmMs4.jpg)


Well that's basic.
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: excluisve on Wed, 28 August 2019, 12:14:50
Shipping group 3:

(https://i.imgur.com/uO8WxRj.png)

(https://i.imgur.com/jAV3ePL.png)



If you have two or three spots i will jump in next time ship together .


please check you order on https://docs.google.com/spreadsheets/d/1_XBfjVO2GSS7VHBJxmqgLTFnqTmt0sZhLu4E1zQHBhw/edit?usp=sharing

then send me shipping details like this format

Geekhack ID:
Paypal     ID:
Real name :
phone call :
address :  country -city/status -street
zip code :

I would rather send message to me on discord(Exclusive#8666) or PM me on here

Group 2 will ship 30 orders, the rest of is group 3.

Estimate shipping fee :
                    asia - 40$ usa - 48$  Europe -Australia- 55$

Extra oring price $12  if you need extra i will add price in shipping invoice

Thanks
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: Rob27shred on Wed, 28 August 2019, 12:27:37
Shipping group 3:

Show Image
(https://i.imgur.com/uO8WxRj.png)


Show Image
(https://i.imgur.com/jAV3ePL.png)




If you have two or three spots i will jump in next time ship together .


please check you order on https://docs.google.com/spreadsheets/d/1_XBfjVO2GSS7VHBJxmqgLTFnqTmt0sZhLu4E1zQHBhw/edit?usp=sharing

then send me shipping details like this format

Geekhack ID:
Paypal     ID:
Real name :
phone call :
address :  country -city/status -street
zip code :

I would rather send message to me on discord(Exclusive#8666) or PM me on here

Group 2 will ship 30 orders, the rest of is group 3.

Estimate shipping fee :
                    asia - 40$ usa - 48$  Europe -Australia- 55$

Extra oring price $12  if you need extra i will add price in shipping invoice

Thanks

So is there gonna be more than 3 waves of shipping? I was under the assumption from what you said above all remaining orders would go out in shipping group 3, but my name has yet to come up?
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: Visionaire on Wed, 28 August 2019, 12:29:20
Yaasssssss
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: Sic_Alpha on Wed, 28 August 2019, 12:29:54
So is there gonna be more than 3 waves of shipping? I was under the assumption from what you said above all remaining orders would go out in shipping group 3, but my name has yet to come up?

I understood that the 3 waves was for the first 100.  Could be wrong though.  I'm hoping for group 4 or 5 on mine :D
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: Hodgeman on Wed, 28 August 2019, 12:39:43
Just want to say holy ****, paid my shipping invoice Monday and it came in today.

The board is flawless as well, this is how you run a GB! :thumb:
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: ossetepo on Wed, 28 August 2019, 18:47:39
My board is in my hands, and it is beautiful. 
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: Rob27shred on Wed, 28 August 2019, 18:59:41
So is there gonna be more than 3 waves of shipping? I was under the assumption from what you said above all remaining orders would go out in shipping group 3, but my name has yet to come up?

I understood that the 3 waves was for the first 100.  Could be wrong though.  I'm hoping for group 4 or 5 on mine :D

E was nice enough to answer a quick PM from me to clear it up (thanks for your time again bud!). I was under the wrong assumption that there would only be 3 shipping groups, so I got a little worried as I was thinking I may have somehow missed my name getting called. TBH I'm probably in the same boat as you & gonna be in group 4 or 5. We'll have ours soon enough man!
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: sanryu on Wed, 28 August 2019, 20:27:04
hello. Did you ship mine?  I answered you my address dm and email
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: Visionaire on Thu, 29 August 2019, 06:54:12
hello. Did you ship mine?  I answered you my address dm and email

Sent him another PM. He's pretty responsive to Discord DMs
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: Soraie on Thu, 29 August 2019, 13:44:48
Any chance for extras or round 2? Sad I missed it..... Looking for a PC if anyone is willing to sell!
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: ilemondrop on Sun, 01 September 2019, 10:09:17
Seconding the voice for extras, I noticed the IC for the E6.5 start showing up with people asking for a second round sale happening? Really confused, I thought old ICs should be locked so does that confirm a sale of extras?
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: Starius on Sun, 01 September 2019, 18:15:16
I've messaged with my info, but I have yet to receive an invoice for shipping as of yet. 
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: Starius on Mon, 02 September 2019, 10:33:20
Yay! I got my invoice!  :thumb:
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: andrewregal on Mon, 02 September 2019, 11:50:12
Got my shipping invoice this morning!
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: Egobean on Mon, 02 September 2019, 21:11:51
if anyone wants to sell their board when they got it i am very interested still and cant wait to see all the upload pics of their builds :)
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: SeriousBG on Mon, 02 September 2019, 23:45:58
I just wanted you guys to know that Exclusive really reliable. I bought a spot from another group buy group and he was able to help ease my mind through all of this so if anyone has any hesitation buying form him, rest easy. He will talk you through everything on his discord its great!
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: Peiweisgreat on Wed, 04 September 2019, 01:12:34
Just gonna sit here twiddling my thumbs and clacking some keys while I slowly die waiting for this board.
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: Visionaire on Wed, 04 September 2019, 20:40:20
Board showed up today, thank you Exclusive for such a smooth GB! I LOVE it.

(https://i.imgur.com/GrJu0Bt.jpg)

(https://i.imgur.com/aVsY8Dv.jpg)

(https://i.imgur.com/C6fnung.jpg)

(https://i.imgur.com/JHVEwUO.jpg)
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: excluisve on Wed, 04 September 2019, 21:53:58
Shipping group 4:

(https://i.imgur.com/ajyusQX.png)

(https://i.imgur.com/0j1tOvC.png)


If you have two or three spots i will jump in next time ship together .


please check you order on https://docs.google.com/spreadsheets/d/1_XBfjVO2GSS7VHBJxmqgLTFnqTmt0sZhLu4E1zQHBhw/edit?usp=sharing

then send me shipping details like this format

Geekhack ID:
Paypal     ID:
Real name :
phone call :
address :  country -city/status -street
zip code :

I would rather send message to me on discord(Exclusive#8666) or PM me on here

Estimate shipping fee :
                    asia - 40$ usa - 48$  Europe -Australia- 55$

Extra oring price $12  if you need extra i will add price in shipping invoice

Thanks


Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: excluisve on Wed, 04 September 2019, 21:58:32
(https://i.imgur.com/JmvKx9S.jpg)

Below is json and hex
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: Starius on Wed, 04 September 2019, 22:06:21
Show Image
(https://i.imgur.com/JmvKx9S.jpg)


Below is json and hex

Thank you for this, Exclusive!

Also worth noting, if anyone hasn't seen, you can see Jae put on the gasket in his build, starting at 1:36:37 mark:

Also.... this is going to be a good week for me... ;)
[attachimg=1]
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: excluisve on Wed, 04 September 2019, 22:08:09
Show Image
(https://i.imgur.com/JmvKx9S.jpg)


Below is json and hex

Thank you for this, Exclusive!

Also worth noting, if anyone hasn't seen, you can see Jae put on the gasket in his build, starting at 1:36 mark:

Also.... this is going to be a good week for me... ;)
(Attachment Link)
Thanks  :thumb:
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: Kevadu on Thu, 05 September 2019, 01:33:12
Shipping group 4:

Show Image
(https://i.imgur.com/ajyusQX.png)


Show Image
(https://i.imgur.com/0j1tOvC.png)


Maybe this sounds nitpicky but I really wish you would post these lists as actual text instead of screenshots so I could just do a ctrl-f to see if my name is there.
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: s3vv4 on Thu, 05 September 2019, 04:38:26
Shipping group 4:

Show Image
(https://i.imgur.com/ajyusQX.png)


Show Image
(https://i.imgur.com/0j1tOvC.png)


Maybe this sounds nitpicky but I really wish you would post these lists as actual text instead of screenshots so I could just do a ctrl-f to see if my name is there.

You are right, this sounds very nitpicky
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: danielucf on Thu, 05 September 2019, 09:07:15
You are right, this sounds very nitpicky

Seems like a perfectly reasonable request to me. I've just been looking at the name on the bottom of the list, going to the document and ctrl-f to see how close it is to me. Round 5 can't come soon enough!
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: DukeEsquire on Thu, 05 September 2019, 12:24:31
You are right, this sounds very nitpicky

Seems like a perfectly reasonable request to me. I've just been looking at the name on the bottom of the list, going to the document and ctrl-f to see how close it is to me. Round 5 can't come soon enough!

Your process seems much harder than just looking at the list.

I think it look less than 3 seconds to see my name on the list using my phone.
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: danielucf on Thu, 05 September 2019, 13:42:16
You are right, this sounds very nitpicky

Seems like a perfectly reasonable request to me. I've just been looking at the name on the bottom of the list, going to the document and ctrl-f to see how close it is to me. Round 5 can't come soon enough!

Your process seems much harder than just looking at the list.

I think it look less than 3 seconds to see my name on the list using my phone.
Sure, but if you're name is not on the list, and you want to see when it might be on the list...
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: Rob27shred on Thu, 05 September 2019, 15:24:35
You are right, this sounds very nitpicky

Seems like a perfectly reasonable request to me. I've just been looking at the name on the bottom of the list, going to the document and ctrl-f to see how close it is to me. Round 5 can't come soon enough!

Your process seems much harder than just looking at the list.

I think it look less than 3 seconds to see my name on the list using my phone.
Sure, but if you're name is not on the list, and you want to see when it might be on the list...

(https://pbs.twimg.com/media/C4R7-x8VMAE9pQW.jpg)
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: spakecdk on Thu, 05 September 2019, 18:42:53
What is an extra oring? Extra gaskets?
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: bball2 on Thu, 05 September 2019, 18:52:14
What is an extra oring? Extra gaskets?

Does the base set include a gasket already?
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: Visionaire on Thu, 05 September 2019, 19:25:38
Yes, every kit automatically comes with a gasket. You can just ask for an extra if you want.
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: bball2 on Thu, 05 September 2019, 19:52:13
Yes, every kit automatically comes with a gasket. You can just ask for an extra if you want.

Gotcha, thanks!  :thumb:
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: Auxo on Sat, 07 September 2019, 23:24:05
A couple of pictures of today's build :)

IF ANYONE KNOWS HOW TO ENABLE ISO LEFT SHIFT ON VIA PLS HELP LOL. My VIA config only shows ANSI :(

[attach=1][attach=2]
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: excluisve on Sun, 08 September 2019, 12:29:51
Shipping group 5:

(https://i.imgur.com/OsJPU3l.png)

(https://i.imgur.com/Yjw212C.png)



If you have two or three spots i will jump in next time ship together .


please check you order on https://docs.google.com/spreadsheets/d/1_XBfjVO2GSS7VHBJxmqgLTFnqTmt0sZhLu4E1zQHBhw/edit?usp=sharing

then send me shipping details like this format

Geekhack ID:
Paypal     ID:
Real name :
phone call :
address :  street - status /city - country
zip code :

I would rather send message to me on discord(Exclusive#8666) or PM me on here

Estimate shipping fee :
                    asia - 40$ usa - 48$  Europe -Australia- 55$

Extra oring price $12  if you need extra i will add price in shipping invoice

Thanks
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: Rob27shred on Sun, 08 September 2019, 13:21:45
Shipping group 5:

Show Image
(https://i.imgur.com/OsJPU3l.png)


Show Image
(https://i.imgur.com/Yjw212C.png)




If you have two or three spots i will jump in next time ship together .


please check you order on https://docs.google.com/spreadsheets/d/1_XBfjVO2GSS7VHBJxmqgLTFnqTmt0sZhLu4E1zQHBhw/edit?usp=sharing

then send me shipping details like this format

Geekhack ID:
Paypal     ID:
Real name :
phone call :
address :  street - status /city - country
zip code :

I would rather send message to me on discord(Exclusive#8666) or PM me on here

Estimate shipping fee :
                    asia - 40$ usa - 48$  Europe -Australia- 55$

Extra oring price $12  if you need extra i will add price in shipping invoice

Thanks


YES! :D
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: Mcnos on Sun, 08 September 2019, 13:35:22
Finished building mines.  :thumb:

Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: Rob27shred on Sun, 08 September 2019, 14:03:13
Finished building mines.  :thumb:


Very nice! Where in world did you find NOS vint blacks?
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: Wongstongs on Sun, 08 September 2019, 19:12:20
Finished building mine today, little typing test below.

Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: Undrcontrl on Tue, 10 September 2019, 10:42:53
Got mine in yesterday (SUPER fast shipping!) and it was super clean!

Now for the sad reality...all these guys building theirs and using them and mine will sit in its original package on a shelf for some unknown amount of time.  :(
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: Mcnos on Tue, 10 September 2019, 10:43:40
Got mine in yesterday (SUPER fast shipping!) and it was super clean!

Now for the sad reality...all these guys building theirs and using them and mine will sit in its original package on a shelf for some unknown amount of time.  :(

Sounds like it's one more to add to your backlog.  ^-^
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: Undrcontrl on Tue, 10 September 2019, 10:45:47
Got mine in yesterday (SUPER fast shipping!) and it was super clean!

Now for the sad reality...all these guys building theirs and using them and mine will sit in its original package on a shelf for some unknown amount of time.  :(

Sounds like it's one more to add to your backlog.  ^-^

Bro, you aren't even kidding.
Have somewhere around 6 unbuilt kits right now and still no major intent to build any of them.
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: rossfromfriends on Tue, 10 September 2019, 11:10:50
(https://i.imgur.com/fCVj5Ca.jpg)
(https://i.imgur.com/dVkJZnq.jpg)
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: razor_blade on Tue, 10 September 2019, 11:16:02
Got mine in yesterday (SUPER fast shipping!) and it was super clean!

Now for the sad reality...all these guys building theirs and using them and mine will sit in its original package on a shelf for some unknown amount of time.  :(

Sounds like it's one more to add to your backlog.  ^-^

Bro, you aren't even kidding.
Have somewhere around 6 unbuilt kits right now and still no major intent to build any of them.

My keyboard backlog is my new Steam game backlog...sigh...
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: itunesacc on Tue, 10 September 2019, 11:20:39
If anyone want to sell his spot and this keyboard, PM me Plz! Especially, E-white color case!
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: Undrcontrl on Tue, 10 September 2019, 11:22:32
Got mine in yesterday (SUPER fast shipping!) and it was super clean!

Now for the sad reality...all these guys building theirs and using them and mine will sit in its original package on a shelf for some unknown amount of time.  :(

Sounds like it's one more to add to your backlog.  ^-^

Bro, you aren't even kidding.
Have somewhere around 6 unbuilt kits right now and still no major intent to build any of them.

My keyboard backlog is my new Steam game backlog...sigh...

Sounds accurate!

Unlike Steam, where I am required to keep the games after purchase, I tend to get to about 10 deep and then sell a few. By that point I will only have built 1-2 and sold one or both of those!
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: slxdegrees on Thu, 12 September 2019, 05:19:23
A couple of pictures of today's build :)

IF ANYONE KNOWS HOW TO ENABLE ISO LEFT SHIFT ON VIA PLS HELP LOL. My VIA config only shows ANSI :(

(Attachment Link) (Attachment Link)

Use QMK configurator and flash the layout to your board.
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: Egobean on Thu, 12 September 2019, 20:48:59
Let me know if anyone is willing to sell their keyboard :) im very interested in one
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: chickenNwaffles on Thu, 12 September 2019, 22:54:32
Could someone inform me what the issue is regarding screw-in stabilizers with the gasket mount? I don't have any clip in ones on hand, so I was wondering if anyone built theirs with screw-ins.
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: nephlock on Thu, 12 September 2019, 23:18:06
Got mine built up and thought I'd share it as well! LOVE the color on this one.

Wathet WK w/block
Red badge & plate
MX Zilents
GMK Minimal

(https://i.imgur.com/gmXNwNe.jpg)
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: dantambok on Fri, 13 September 2019, 04:30:46
Just got mine today.

I was wondering if anyone built theirs with a polycarb halfplate? This is what i got now iím afraid it might be too bouncy or flexy  :(
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: cldskt on Fri, 13 September 2019, 04:50:28
Arrived within one business day. Thanks for the smooth GB E!
(https://uploads.tapatalk-cdn.com/20190913/63892f75483a76cd01c22bb8927f7ed6.jpg)(https://uploads.tapatalk-cdn.com/20190913/0879a6b86093349f6b11ada692a040b9.jpg)
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: petamva on Fri, 13 September 2019, 11:41:01
Night flex!
Thank you exclusive!
[attachimg=1]
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: Bryan on Fri, 13 September 2019, 14:19:41
(https://i.imgur.com/xE2IUhl.jpg)

(https://i.imgur.com/iSbYv4y.jpg)

(https://i.imgur.com/fjHZZRu.jpg)

(https://i.imgur.com/7UxbnIL.jpg)

(https://i.imgur.com/RhBJmQi.jpg)

(https://i.imgur.com/Wb1FKlF.jpg)

(https://i.imgur.com/1w2OhRT.jpg)

(https://i.imgur.com/9pmd1vS.jpg)

(https://i.imgur.com/wucau15.jpg)

(https://i.imgur.com/D1KFynf.jpg)

Got mine. So happy with the quality and appearance of the keyboard. My only regret is not getting a Gold PVD Brass name plate with some text/default text on it.

This is my first custom GB board, and I really enjoy the fun this hobby has become for me (minus the waiting times). Now that I have a few boards and keysets it is time to relax and let the wallet rest.

Specs:
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: elmo on Sat, 14 September 2019, 02:22:36
Board just arrived and it just looks so awesome.
Can't stop looking at it  :-X

(https://i.imgur.com/UKikEiS.jpg)
(https://i.imgur.com/Ra3ZG2R.jpg)
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: vncsnty on Sat, 14 September 2019, 11:24:48
Any link how to flash? Can this be flash using QMK or VIA?
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: excluisve on Sat, 14 September 2019, 11:33:24
Any link how to flash? Can this be flash using QMK or VIA?
Yea,you can dowload the hex and json (check my last few post

QMK and via were support (0.3.6 version and the via hex files

if still have any question pm me or find me on discord .
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: bball2 on Sat, 14 September 2019, 15:34:02
I was just looking at the gasket mount installation guide:

https://i.imgur.com/JmvKx9S.jpg

And step 2 says not to screw the plate into the top piece yet, but step 3 says to put the bottom piece next. So are you not supposed to secure the plate onto the top piece?

Also what's everyone using to program it? I tried via (0.3.6 and the latest 0.40) but neither one recognize this board. I also downloaded the json file and tried using uploading it to:

https://config.qmk.fm

But I get an error along the lines of "doesn't support uploading kbfirmware json files"
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: Esheu2 on Sat, 14 September 2019, 18:26:48
I was just looking at the gasket mount installation guide:

https://i.imgur.com/JmvKx9S.jpg

And step 2 says not to screw the plate into the top piece yet, but step 3 says to put the bottom piece next. So are you not supposed to secure the plate onto the top piece?

Also what's everyone using to program it? I tried via (0.3.6 and the latest 0.40) but neither one recognize this board. I also downloaded the json file and tried using uploading it to:

https://config.qmk.fm

But I get an error along the lines of "doesn't support uploading kbfirmware json files"

To my understanding, if you're using the gasket, you do not secure it to the top piece. The gasket should kinda friction fit the plate and pcb combo into the case.

For the error message you're getting, that means that the .json file you're using is meant for https://kbfirmware.com/ (https://kbfirmware.com/) not qmk config.
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: dannyny on Sun, 15 September 2019, 11:29:31
any extras?
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: iamacicada on Tue, 17 September 2019, 12:51:51
Got mine built up and thought I'd share it as well! LOVE the color on this one.

Wathet WK w/block
Red badge & plate
MX Zilents
GMK Minimal

Show Image
(https://i.imgur.com/gmXNwNe.jpg)


My favorite combination so far. Very clean with a hint of minimalism. Great photography too.
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: ever9415 on Wed, 18 September 2019, 01:02:54
When will the last group begin shipping? I'm waiting too long.
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: excluisve on Wed, 18 September 2019, 07:27:19
Last group:

(https://i.imgur.com/vku0WAa.png)

(https://i.imgur.com/mRbx0ng.png)


please check you order on https://docs.google.com/spreadsheets/d/1_XBfjVO2GSS7VHBJxmqgLTFnqTmt0sZhLu4E1zQHBhw/edit?usp=sharing

then send me shipping details like this format

Geekhack ID:
Paypal     ID:
Real name :
phone call :
address :  street - status /city - country
zip code :

I would rather send message to me on discord(Exclusive#8666) or PM me on here

Estimate shipping fee :
                    asia - 40$ usa - 48$  Europe -Australia- 55$

Extra oring price $12  if you need extra i will add price in shipping invoice

Thanks

Title: Re: E6.5 - 65% custom keyboard (Last shipping Group )
Post by: JubJubCity on Wed, 18 September 2019, 11:51:14
Yeah last group can't wait  :thumb:

Sent you a message on Discord with the required info.
Title: Re: E6.5 - 65% custom keyboard (Last shipping Group )
Post by: cyyz on Wed, 18 September 2019, 12:29:41
i sent a pm here on geekhack
Title: Re: E6.5 - 65% custom keyboard (Last shipping Group )
Post by: habyss on Wed, 18 September 2019, 18:21:09
Sent PM
Title: Re: E6.5 - 65% custom keyboard (Last shipping Group )
Post by: Peiweisgreat on Thu, 19 September 2019, 19:27:41
sent pm on disc
Title: Re: E6.5 - 65% custom keyboard (Last shipping Group )
Post by: MPAstudio on Fri, 20 September 2019, 03:08:02
SENT PM
Title: Re: E6.5 - 65% custom keyboard (Last shipping Group )
Post by: Rob27shred on Fri, 20 September 2019, 17:13:43
[attach=1]
[attach=2]
[attach=3]
[attach=4]

It's beautiful! 😢
Title: Re: E6.5 - 65% custom keyboard (Last shipping Group )
Post by: excluisve on Fri, 20 September 2019, 22:23:47
Get all pm and message but cant reply in time sorry that .

keyboards were shipped out already but tracking number will come out tmr .

Until now E6.5 finished

thanks all 
Title: Re: E6.5 - 65% custom keyboard (Last shipping Group )
Post by: lanyusea on Fri, 20 September 2019, 22:28:27
Get all pm and message but cant reply in time sorry that .

keyboards were shipped out already but tracking number will come out tmr .

Until now E6.5 finished

thanks all 


 :thumb: :thumb: :thumb:
Title: Re: E6.5 - 65% custom keyboard (Last shipping Group )
Post by: cyyz on Fri, 20 September 2019, 22:49:52
Edit-figured it out
Title: Re: E6.5 - 65% custom keyboard (Last shipping Group )
Post by: Rob27shred on Sat, 21 September 2019, 04:34:36
So I'm gonna be building up my E6.5 between today & tomorrow, but have a few questions. I want to use the gasket mount, but have heard of some gasket mounted boards not working with GMK screw-in stabilizers. Is that the case with this board or will I be fine using them? I do have a set of Cherry clip in PCB mount stabilizers, but would much prefer to use the screw in ones if possible. Also I am planning on using MK Ultra plate & case foams with this build. Will the plate foam interfere with the gasket at all? I figure that is not as big as an issue as the stabilizers since I can just trim the edges of the foam back to allow room for the gasket if need be, or even just drop the plate foam & go with the sorbothane strut mod. Anyways, any info from anybody who has built theirs already with the gasket mounting would be highly appreciated!
Title: Re: E6.5 - 65% custom keyboard (Last shipping Group )
Post by: Auxo on Sat, 21 September 2019, 04:46:13
So I'm gonna be building up my E6.5 between today & tomorrow, but have a few questions. I want to use the gasket mount, but have heard of some gasket mounted boards not working with GMK screw-in stabilizers. Is that the case with this board or will I be fine using them? I do have a set of Cherry clip in PCB mount stabilizers, but would much prefer to use the screw in ones if possible. Also I am planning on using MK Ultra plate & case foams with this build. Will the plate foam interfere with the gasket at all? I figure that is not as big as an issue as the stabilizers since I can just trim the edges of the foam back to allow room for the gasket if need be, or even just drop the plate foam & go with the sorbothane strut mod. Anyways, any info from anybody who has built theirs already with the gasket mounting would be highly appreciated!

I used GMK screw in stabs and the gasket works perfectly fine, not sure about how the mk ultra plate and case foam would affect it though.
Title: Re: E6.5 - 65% custom keyboard (Last shipping Group )
Post by: Rob27shred on Sat, 21 September 2019, 04:58:04
So I'm gonna be building up my E6.5 between today & tomorrow, but have a few questions. I want to use the gasket mount, but have heard of some gasket mounted boards not working with GMK screw-in stabilizers. Is that the case with this board or will I be fine using them? I do have a set of Cherry clip in PCB mount stabilizers, but would much prefer to use the screw in ones if possible. Also I am planning on using MK Ultra plate & case foams with this build. Will the plate foam interfere with the gasket at all? I figure that is not as big as an issue as the stabilizers since I can just trim the edges of the foam back to allow room for the gasket if need be, or even just drop the plate foam & go with the sorbothane strut mod. Anyways, any info from anybody who has built theirs already with the gasket mounting would be highly appreciated!

I used GMK screw in stabs and the gasket works perfectly fine, not sure about how the mk ultra plate and case foam would affect it though.

Awesome news there, thanks for the heads up! Yeah not sure about the foam yet myself, but I got options there. Cut the foam back or just use the sorbothane strut mod so I don't gotta worry about anything being by the edges of the plate.
Title: Re: E6.5 - 65% custom keyboard (Last shipping Group )
Post by: _ODIN_ on Sat, 21 September 2019, 09:53:40
Built my E-White E6.5 yesterday. I am impressed.

Switches: Burgundy Pandas (Krytox 203; 60g springs)
Keycaps: SA Vilebloom
[attachimg=1][attachimg=2][attachimg=3][attachimg=4][attachimg=5][attachimg=6][attachimg=7]
Title: Re: E6.5 - 65% custom keyboard (Last shipping Group )
Post by: Rob27shred on Sat, 21 September 2019, 10:58:40
Built my E-White E6.5 yesterday. I am impressed.

Switches: Burgundy Pandas (Krytox 203; 60g springs)
Keycaps: SA Vilebloom
(Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link)

So clean, love it man! I didn't know you could get these without the arrow blocker, I went for the WKL case, but I really like it without any blockers too!
Title: Re: E6.5 - 65% custom keyboard (Last shipping Group )
Post by: _ODIN_ on Sat, 21 September 2019, 14:02:30
Built my E-White E6.5 yesterday. I am impressed.

Switches: Burgundy Pandas (Krytox 203; 60g springs)
Keycaps: SA Vilebloom
(Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link)

So clean, love it man! I didn't know you could get these without the arrow blocker, I went for the WKL case, but I really like it without any blockers too!
Thank you!
I really like the symmetry of the 1.5/1.5/7/1.5/1.5 bottom row.

Gesendet von meinem H8416 mit Tapatalk

Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: bball2 on Sat, 21 September 2019, 19:50:37
To my understanding, if you're using the gasket, you do not secure it to the top piece. The gasket should kinda friction fit the plate and pcb combo into the case.

For the error message you're getting, that means that the .json file you're using is meant for https://kbfirmware.com/ (https://kbfirmware.com/) not qmk config.

Thanks, kbfirmware did the trick!

Also I removed the screws attaching the plate to the top half and didn't make a difference, so I'm assuming that's the proper way to install it if you're using the gasket.

PS. For anyone who is having trouble flashing with the qmk toolbox, you have to press and hold the button on the backside of the pcb for three seconds before the keyboard is recognized as an HID device. Then you can flash using the compiled hex file generated from kbdfirmware.

Here's a pic of my completed build:

(https://i.imgur.com/GyqON31.jpg)

(https://i.imgur.com/oeUfFng.jpg)

Polycarb version - red half plate + wathet / dark red badge
T1 tactile switches
EnjoyPBT extended w/ Torll / Icono
Title: Re: E6.5 - 65% custom keyboard (Start shipping )
Post by: JubJubCity on Sat, 21 September 2019, 19:58:30
To my understanding, if you're using the gasket, you do not secure it to the top piece. The gasket should kinda friction fit the plate and pcb combo into the case.

For the error message you're getting, that means that the .json file you're using is meant for https://kbfirmware.com/ (https://kbfirmware.com/) not qmk config.

Thanks, kbfirmware did the trick!

PS. For anyone who is having trouble flashing with the qmk toolbox, you have to press and hold the button on the backside of the pcb for three seconds before the keyboard is recognized as an HID device.
Sweet thanks for the info, just paid my invoice looking forward to building this.
Title: Re: E6.5 - 65% custom keyboard (Last shipping Group )
Post by: cattharsis on Sat, 21 September 2019, 20:23:13

Then you can flash using the compiled hex file generated from kbdfirmware.


just FYI, you dont have to use the hexfile from kbdfirmware if you dont want to. Theres support for E6.5 now on config.qmk.fm.
Title: Re: E6.5 - 65% custom keyboard (Last shipping Group )
Post by: Rob27shred on Sat, 21 September 2019, 20:24:04
Built my E-White E6.5 yesterday. I am impressed.

Switches: Burgundy Pandas (Krytox 203; 60g springs)
Keycaps: SA Vilebloom
(Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link)

So clean, love it man! I didn't know you could get these without the arrow blocker, I went for the WKL case, but I really like it without any blockers too!
Thank you!
I really like the symmetry of the 1.5/1.5/7/1.5/1.5 bottom row.

Gesendet von meinem H8416 mit Tapatalk

I agree, I have the same bottom row setup on my RedscarfII+ ver.c & think it not only looks better than the setup using a 6.25u spacebar, but feels better too!
Title: Re: E6.5 - 65% custom keyboard (Last shipping Group )
Post by: foo4542 on Sun, 22 September 2019, 03:36:18
Another sick board!
[attachimg=1]
Title: Re: E6.5 - 65% custom keyboard (Last shipping Group )
Post by: wowja on Sun, 22 September 2019, 16:09:44
Man, so jealous. I want a PC case with PC plate. I missed this GB and the Think6.5!
Title: Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED)
Post by: excluisve on Wed, 25 September 2019, 08:53:25
Thanks for everyone ,Gb finished .

sorry for the delay, exclusive will do it better next time ,hope my keyboard become you exclusively one !!

Let us meet next time

Thanks again to all orders and my friends

Title: Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED)
Post by: jacky on Wed, 25 September 2019, 09:02:16
Thanks for everyone ,Gb finished .

sorry for the delay, exclusive will do it better next time ,hope my keyboard become you exclusively one !!

Let us meet next time

Thanks again to all orders and my friends

Great job again ! :thumb:
Title: Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED)
Post by: ever9415 on Wed, 25 September 2019, 09:09:44
Thanks for everyone ,Gb finished .

sorry for the delay, exclusive will do it better next time ,hope my keyboard become you exclusively one !!

Let us meet next time

Thanks again to all orders and my friends


I received it safely.
Thank you for sending me well. ^^

(https://i.imgur.com/5MDnEwL.jpg)
(https://i.imgur.com/9aLsJFe.jpg)
Title: Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED)
Post by: ptiede on Wed, 25 September 2019, 14:32:56
Thanks for everyone ,Gb finished .

sorry for the delay, exclusive will do it better next time ,hope my keyboard become you exclusively one !!

Let us meet next time

Thanks again to all orders and my friends

You did a great job! There were so many boards this round.
Title: Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED)
Post by: bball2 on Wed, 25 September 2019, 16:23:54
Thanks for everyone ,Gb finished .

sorry for the delay, exclusive will do it better next time ,hope my keyboard become you exclusively one !!

Let us meet next time

Thanks again to all orders and my friends


A little late, but great communication and great quality product! No complaints from me  :thumb:
Title: Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED)
Post by: Rob27shred on Wed, 25 September 2019, 16:29:21
Thanks for everyone ,Gb finished .

sorry for the delay, exclusive will do it better next time ,hope my keyboard become you exclusively one !!

Let us meet next time

Thanks again to all orders and my friends


Thanks again for the smooth GB & extra communication you did with me to make sure you had my address right! The delay is really nothing to apologize about IMO, it was a very small one & was done to ensure the quality of the product. Nothing wrong with that at all! Honestly this was one of the smoothest, worry free GBs I've participated in. Looking forward to your future designs & would not hesitate to buy another board through you! :thumb:
Title: Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
Post by: LuiKang on Sat, 28 September 2019, 06:28:04
Type test on alu top and pc bottom
Title: Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
Post by: koenoe on Sat, 28 September 2019, 08:15:34
Thank you very much for this smooth Group Buy. It's been a good one and I'm very happy with the board. Also I'd like to highlight the unboxing process, which was an amazing experience! I felt like a little kid unboxing a birthday or Christmas present. Thanks again, and can't wait to join your next one :-)

(https://cdn.discordapp.com/attachments/555079607250976798/627453446420955136/e65_small.jpg)

Title: Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
Post by: mrpetrov on Sat, 28 September 2019, 08:41:40
I have the PC e6.5 with rose gold rear and badge. Would anyone be interested in swapping their alu case for a pc case?
Title: Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
Post by: itunesacc on Sat, 28 September 2019, 11:48:19
Everyone! If you willing to sell this keyboard, plz PM me!!!
Title: Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
Post by: victorpre on Sat, 28 September 2019, 14:08:07
Any extras available? :)

Sent from my Pixel 2 XL using Tapatalk

Title: Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
Post by: click clack jack on Sat, 28 September 2019, 14:18:17
Exclusive is a TOP TIER gb runner!

The box, the ano qual, the orginization, etc etc!

(https://i.imgur.com/3FmqOho.jpg)
Title: Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
Post by: Rob27shred on Sat, 28 September 2019, 14:47:56
Exclusive is a TOP TIER gb runner!

The box, the ano qual, the orginization, etc etc!

Show Image
(https://i.imgur.com/3FmqOho.jpg)



Looks great OP & gives me a little preview on mine! I went with the dark red WKL alum. case to pair with Jamon as well. However I went with e-white accents (nameplate & weight) cause I really like the look of Jamon with both white & black accents with the white spacebar. Other than that I plan on doing the same layout so we're pretty much E6.5 bros!
Title: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
Post by: cldskt on Sun, 29 September 2019, 09:48:28
(https://uploads.tapatalk-cdn.com/20190929/ce1814e4ff713ef508c98bff56e9a10b.jpg)

Full album: https://imgur.com/a/7DwPZcd
Title: Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
Post by: excluisve on Mon, 30 September 2019, 08:39:42
Sort some pic and video sharing here :


https://imgur.com/a/P9tWgmH (https://imgur.com/a/P9tWgmH)

Thanks to those orders :


(https://i.imgur.com/htTZRcC.jpg)

(https://i.imgur.com/kMq8mUO.jpg)


(https://i.imgur.com/bnaFXN7.jpg)



Have much video so that not all post
Title: Re: E6.5 - 65% custom keyboard (Last shipping Group )
Post by: excluisve on Mon, 30 September 2019, 08:40:23
Built my E-White E6.5 yesterday. I am impressed.

Switches: Burgundy Pandas (Krytox 203; 60g springs)
Keycaps: SA Vilebloom
(Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link)
Thanks to sharing those great pic !
Title: Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
Post by: excluisve on Mon, 30 September 2019, 08:40:43
Show Image
(https://uploads.tapatalk-cdn.com/20190929/ce1814e4ff713ef508c98bff56e9a10b.jpg)


Full album: https://imgur.com/a/7DwPZcd

Thanks to sharing those great pic !
Title: Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
Post by: Mcnos on Mon, 30 September 2019, 09:05:40
(https://i.redd.it/ywx0nofnr8m31.jpg)

(https://i.redd.it/2ceomazbrul31.jpg)
Title: Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
Post by: Fallakin on Tue, 01 October 2019, 08:29:34
Invite link is dead, got a new one?

(Used to be in there and mistakenly left the server cleaning up what I'm joined to in Discord)
Title: Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
Post by: Vov on Tue, 01 October 2019, 12:40:20
Invite link is dead, got a new one?

(Used to be in there and mistakenly left the server cleaning up what I'm joined to in Discord)

https://discord.gg/CvwbHd
Title: Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
Post by: Fallakin on Tue, 01 October 2019, 12:44:34
Thank you!
Title: Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
Post by: BIG_BUCKNUT on Tue, 01 October 2019, 12:52:47
If anyone has an extra nameplate they're willing to part with please let me know. Looking for gold or rose gold.
Title: Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
Post by: Tekniqs on Fri, 04 October 2019, 21:47:08
anyone have an extra name plate? blank or the 'normal' exclusive name.
Title: Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
Post by: Rob27shred on Sun, 06 October 2019, 14:18:49
[attachimg=1]

Finally got around to building mine!
Title: Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
Post by: Rob27shred on Sat, 12 October 2019, 13:49:37
Finally got VIA working with mine today thanks to the always awesome LightningXI! Now that I got it going I figured it would be a good ideal to post the links to the latest version of VIA that supports the E6.5 & the .hex file that allows VIA to recognize your E6.5 here for others who couldn't find them like me.

E6.5 VIA.hex - https://cdn.discordapp.com/attachments/555079607250976798/615866051988815872/exclusive_e65_VIA.hex (https://cdn.discordapp.com/attachments/555079607250976798/615866051988815872/exclusive_e65_VIA.hex)
Latest version of VIA - https://github.com/olivia/via-config/releases/latest (https://github.com/olivia/via-config/releases/latest)
Title: Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
Post by: danielucf on Thu, 17 October 2019, 01:44:14
Are the details on how to QMK configure this anywhere? What is the microcontroller for example.
Title: Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
Post by: neon_tom on Thu, 17 October 2019, 06:36:54
Are the details on how to QMK configure this anywhere? What is the microcontroller for example.


https://github.com/qmk/qmk_firmware/tree/master/keyboards/exclusive/e65

Everything you need should be in here.


Sent from my iPhone using Tapatalk
Title: Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
Post by: Tyson on Thu, 17 October 2019, 13:14:06
I somehow misplaced my screws for the nameplate and the screws for the top mount option, is it possible to buy the screws again?
Title: Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
Post by: elmo on Tue, 19 November 2019, 11:39:05
symbiosis finally came and I finished my build. It came out absolutely gorgeous ;D

(https://i.imgur.com/J4e4FKL.jpg)(https://i.imgur.com/RDmvu0d.jpg)
(https://i.imgur.com/mEQVaT1.jpg)(https://i.imgur.com/DVbZgOW.jpg)
Title: Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
Post by: PocketAces on Sat, 07 December 2019, 08:16:17
Yeah soo that white and rose gold is probably my dream board. Unfortunately I didnít even know about this hobby when this went into group buy lol.

Any word on another round? Or maybe extras from this round?


Orrrrr if you want to sell me your white/rose gold, DM me!


Sent from my iPhone using Tapatalk
Title: Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
Post by: Sic_Alpha on Sat, 07 December 2019, 13:15:35
Yeah soo that white and rose gold is probably my dream board. Unfortunately I didnít even know about this hobby when this went into group buy lol.

Any word on another round? Or maybe extras from this round?


Orrrrr if you want to sell me your white/rose gold, DM me!


Sent from my iPhone using Tapatalk

His GB for E8.5 was just extended and should still be open.  Would be quick about it if you want it though.

https://geekhack.org/index.php?topic=103520.0;topicseen
Title: Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
Post by: Egobean on Sun, 29 December 2019, 17:31:49
me personally im only into the 65% keyboards i wish i got in this one when it happened.
Title: Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
Post by: Egobean on Sun, 16 February 2020, 17:13:27
if anyone is willing to sell their e6.5 keyboard pm me please :)
Title: Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
Post by: ElKapitain on Sat, 22 February 2020, 10:39:59
I'm also willing to buy one, reach out on reddit if you are interested to sell :) u/C4pitain
Title: Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
Post by: excluisve on Tue, 17 March 2020, 11:43:57
http://bit.ly/33rWi8w PCB release
Title: Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
Post by: Rob27shred on Tue, 17 March 2020, 12:03:28
http://bit.ly/33rWi8w PCB release

Awesome, thanks for doing a batch of these E! I've been wanting to do a linear build for my E6.5, but really didn't want to desolder my current setup it in it to do so. No more worries now for those of us who didn't order any extra PCBs or plates! Just ordered myself a PCB, PC plate, & fresh gasket. When will PP invoices be going out for these?
Title: Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
Post by: nephlock on Tue, 17 March 2020, 12:10:33
http://bit.ly/33rWi8w PCB release
Do these PCBs also include the the side RGB lights the originals had?
Title: Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
Post by: Rob27shred on Tue, 17 March 2020, 12:13:25
http://bit.ly/33rWi8w PCB release
Do these PCBs also include the the side RGB lights the originals had?

Good question! I'd imagine they would, but we'll have to wait for E's answer to be sure. Not a deal breaker for me either way as i very rarely use the LEDs on my E6.5.
Title: Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
Post by: excluisve on Tue, 17 March 2020, 12:24:10
http://bit.ly/33rWi8w PCB release
Do these PCBs also include the the side RGB lights the originals had?
Same like OG one
Title: Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
Post by: danielucf on Sun, 29 March 2020, 15:17:19
I am experiencing two issues. First is that the keyboard doesn't show up as an HID Device in QMK Toolbox. Second is when I hit the reset or bootloader mode button on the bottom of the PCB nothing happens.

Any ideas what might be needed to fix these issues?
Title: Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
Post by: Rob27shred on Fri, 03 April 2020, 22:49:52
Just a heads up to anyone who bought one of the black replacement PCBs, they do not use the same hex files as the original yellow one & the new ones are not VIA compatible. It will show up in VIA & let you map the keys, but the PCB will not output keystrokes after that. Here are links to the proper json & hex file,
json - https://cdn.discordapp.com/attachments/555079607250976798/694199663347236956/black6.5.json (https://cdn.discordapp.com/attachments/555079607250976798/694199663347236956/black6.5.json)
hex file - https://cdn.discordapp.com/attachments/555079607250976798/694199659501060237/black6.5.hex (https://cdn.discordapp.com/attachments/555079607250976798/694199659501060237/black6.5.hex)

Also if you want to upload the json to remap it, you'll have to do it on https://kbfirmware.com/ (https://kbfirmware.com/) (talk about a blast from the past! LOL) because that are not compatible with QMK configurator. Anyways, hopes this help someone avoid the stress I went through tonight thinking I could use the same jsons & hex files I made for the original yellow PCB.
Title: Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
Post by: Rob27shred on Fri, 03 April 2020, 22:57:42
I am experiencing two issues. First is that the keyboard doesn't show up as an HID Device in QMK Toolbox. Second is when I hit the reset or bootloader mode button on the bottom of the PCB nothing happens.

Any ideas what might be needed to fix these issues?

Do you have to original yellow PCB or the new black one? With the new black new it will not show up as a HID device in QMK toolbox till you reset it. To reset it you have to short the two copper through hole pads directly above where it says reset since there is no reset button on the black PCBs. If it is the original yellow PCB (which does have a reset button if I am remembering correctly) then it may be a dud. In that case I would send Exclusive a DM on Discord or here (Discord has been the easiest place to get a hold of him IME). Anyways GL getting your PCB up & running man!
Title: Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
Post by: 8six753o9 on Sun, 05 April 2020, 19:33:41
I'm working on doing a PR for the Black PCB to QMK and VIA soon.  Almost done.
Title: Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
Post by: Rob27shred on Sun, 05 April 2020, 22:36:35
I'm working on doing a PR for the Black PCB to QMK and VIA soon.  Almost done.

Awesome to hear! Please post a link when you get it finished.
Title: Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
Post by: PocketAces on Sat, 11 April 2020, 11:16:53
Hey, I wanted to hop on here to see if anyone is having the same issue that I am with this board.

I've got an ansi with no blockers. with the winkey. the right side of my spacebar has an  Alt and then a Ctrl key. The default config seems to have that right control key acting as an FN to access the layer with F row keys and other settings, but my right control key does nothing when pressing it with anything in switch hitter to test it.

I made a file where I added media control keys to that first layer as well--again with the right control acting as a momentary turn on for layer 1. I flashed the board with it, and it appeared to be successful as I didn't get any errors, but the right control key still seems to do nothing. Am I doing something wrong? This is my first time using QMK, but I followed the instructions from Mechmerlin's video series.

Thanks for any help and suggestions in advance.
Title: Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
Post by: Starius on Sat, 11 April 2020, 17:39:33
Hey, I wanted to hop on here to see if anyone is having the same issue that I am with this board.

I've got an ansi with no blockers. with the winkey. the right side of my spacebar has an  Alt and then a Ctrl key. The default config seems to have that right control key acting as an FN to access the layer with F row keys and other settings, but my right control key does nothing when pressing it with anything in switch hitter to test it.

I made a file where I added media control keys to that first layer as well--again with the right control acting as a momentary turn on for layer 1. I flashed the board with it, and it appeared to be successful as I didn't get any errors, but the right control key still seems to do nothing. Am I doing something wrong? This is my first time using QMK, but I followed the instructions from Mechmerlin's video series.

Thanks for any help and suggestions in advance.

This might be something simple you overlooked, but I would double check to see that the pins of that switch didn't actually get bent and not making contact on the pcb - that would be a simple cause for those issues you're experiencing. 
Title: Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
Post by: evilsharky on Mon, 13 April 2020, 13:35:18
Looking to buy an e-white version!
Title: Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
Post by: BigBabyJesus on Tue, 14 April 2020, 03:45:44
Looking to buy the PC one!
Title: Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
Post by: dzbro on Fri, 01 May 2020, 14:57:51
Anyone know what tool I need to unscrew the back of the board? I just bought one someone on Reddit and I'm stumped..
Title: Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
Post by: smoian on Fri, 01 May 2020, 16:00:12
Anyone know what tool I need to unscrew the back of the board? I just bought one someone on Reddit and I'm stumped..

I used the H1.5 from this set https://www.amazon.com/Nanch-Precision-Screwdriver-Smartphone-Electronics/dp/B00QZLV03O?ref_=s9_apbd_orecs_hd_bw_b2Jwu&pf_rd_r=3W74VBAN2AJZYEVG464P&pf_rd_p=6e4d9b8c-4111-590f-8aaf-f17fa8bd5a04&pf_rd_s=merchandised-search-10&pf_rd_t=BROWSE&pf_rd_i=553344 (https://www.amazon.com/Nanch-Precision-Screwdriver-Smartphone-Electronics/dp/B00QZLV03O?ref_=s9_apbd_orecs_hd_bw_b2Jwu&pf_rd_r=3W74VBAN2AJZYEVG464P&pf_rd_p=6e4d9b8c-4111-590f-8aaf-f17fa8bd5a04&pf_rd_s=merchandised-search-10&pf_rd_t=BROWSE&pf_rd_i=553344):
Title: Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
Post by: dzbro on Fri, 01 May 2020, 16:06:51
Anyone know what tool I need to unscrew the back of the board? I just bought one someone on Reddit and I'm stumped..

I used the H1.5 from this set https://www.amazon.com/Nanch-Precision-Screwdriver-Smartphone-Electronics/dp/B00QZLV03O?ref_=s9_apbd_orecs_hd_bw_b2Jwu&pf_rd_r=3W74VBAN2AJZYEVG464P&pf_rd_p=6e4d9b8c-4111-590f-8aaf-f17fa8bd5a04&pf_rd_s=merchandised-search-10&pf_rd_t=BROWSE&pf_rd_i=553344 (https://www.amazon.com/Nanch-Precision-Screwdriver-Smartphone-Electronics/dp/B00QZLV03O?ref_=s9_apbd_orecs_hd_bw_b2Jwu&pf_rd_r=3W74VBAN2AJZYEVG464P&pf_rd_p=6e4d9b8c-4111-590f-8aaf-f17fa8bd5a04&pf_rd_s=merchandised-search-10&pf_rd_t=BROWSE&pf_rd_i=553344):

Hmm, thanks. I'll give that a try. I'm starting to think the screws are stripped.... If they are, know where to get replacements?
Title: Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
Post by: nghiahc on Sat, 09 May 2020, 22:26:05
http://bit.ly/33rWi8w PCB release
Is it still available?
Title: Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
Post by: Riskymilk on Tue, 15 September 2020, 23:01:14
Looking to buy a PC Plate (Full or Half)!
Title: Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
Post by: Riskymilk on Mon, 21 September 2020, 18:36:39
I found a pc plate! looking for a black pcb now :P
Title: Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
Post by: bball2 on Sat, 14 November 2020, 15:53:10
Does anyone know if there will be another round of PCB's in the future? Or any third party PCB's that's compatible? Mine has been having all sorts of problems since trying to flash to a VIA compatible firmware (key presses are only registering like 50% of the time) randomly across the board =\
Title: Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
Post by: ic33hot on Sat, 09 January 2021, 13:13:11
Please sell me your wathet blue badge and weight!