E6.5 - 65% custom keyboard (GROUP BUY FINISHED )

[MatthewPham]

how does this work by the way? Will it end being a 'raffle' type if more than 100 people submitted a form?

fcfs

[foo4542]

I'm in. The dark red fits my bill perfectly.

[Visionaire]

Feels like this is going to be a very PC GB - and a lot of folks are going to get that first PC they've been wanting! Good stuff.

[Tekniqs]

fcfs

thanks!

[Auxo]

how does this work by the way? Will it end being a 'raffle' type if more than 100 people submitted a form?

Doubt it, itll likely be FCFS, then anyone else who fills the form after will be queued for a waiting list in case anybody drops out or is unable to pay.

[Tekniqs]

btw...any one know how thick that PC plate is?

[Bryan]

This the perfect 65% keyboard I've been looking for! Similar layout to my KBD67, but underglow/case supported!

[Hokabuki]

Debating on whether I want the right blocker or not. Can’t decide which is the better aesthetic. Anyone going with Wingdings font?

[oh_chesteroni]

ordered

[eyedrop]

What font are you guys choosing?  I want some idea.

[LiL_BrOwNiE247]

btw...any one know how thick that PC plate is?

I'd assume 1.5 mm unless specified otherwise.

[cattharsis]

What font are you guys choosing?  I want some idea.

This is the font im going with: https://www.dafont.com/kiona-2.font

Something simple and clean.

[Tekniqs]

btw...any one know how thick that PC plate is?

I'd assume 1.5 mm unless specified otherwise.

OOOOF. will have to change plate material if it's 1.5mm pc

[darryq]

will there be support for a split backspace?

[Puree]

will there be support for a split backspace?

The supported layouts in the ic : https://i.imgur.com/c51Pa9t.jpg

 

[Chimera]

I submitted earlier today, but am having second thoughts about my plate choice. I want to make sure i'm still one of the first 100. If I want to swap from E-Black plate to PVD Rose Gold and submit a new form will my spot be pushed back, additionally, would it be easier for me to PM you for a minor change or just submit a new form? Also, is there compatibility with any other PCBs?

[Kevadu]

I am incredibly uncreative and couldn't think of anything to put on the nametag so I just went with the default, but if I do change my mind later would it be possible to change that?

[Puddsy]

might have to go in just for that dark red

it is beautiful

[oh_chesteroni]

I submitted earlier today, but am having second thoughts about my plate choice. I want to make sure i'm still one of the first 100. If I want to swap from E-Black plate to PVD Rose Gold and submit a new form will my spot be pushed back, additionally, would it be easier for me to PM you for a minor change or just submit a new form? Also, is there compatibility with any other PCBs?

The E6.5 uses a center port USB C pcb so it's unlikely there is any compatibility with readily available 65% pcbs

[Chimera]

I submitted earlier today, but am having second thoughts about my plate choice. I want to make sure i'm still one of the first 100. If I want to swap from E-Black plate to PVD Rose Gold and submit a new form will my spot be pushed back, additionally, would it be easier for me to PM you for a minor change or just submit a new form? Also, is there compatibility with any other PCBs?

The E6.5 uses a center port USB C pcb so it's unlikely there is any compatibility with readily available 65% pcbs

Good point then I'm going to keep the backup in my order then.

Still curious about the other question I had

Sent from my ONEPLUS A6003 using Tapatalk

[vtachkov]

The E6.5 uses a center port USB C pcb so it's unlikely there is any compatibility with readily available 65% pcbs

The zeal65 has a centered USB C, so I wonder if the E6.5 would be compatible with that. That might end up being really nice for the pc case.

[Ephemeral]

Psyched. In for one.

[tipsyboo]

I have a feeling I'm the only one going for winkey_no_blockers  )

[excluisve]

Hi guys, just wake up i will post spreadsheet and reply one by one

thanks  .

[excluisve]

Due to much people fill the form i will close it at  8:00pm (EST)

thanks everyone

[JubJubCity]

In for a PC can't wait

[Sic_Alpha]

Due to much people fill the form i will close it at  8:00pm (EST)

thanks everyone

Popular!  I submitted a second to update/modify/replace my first order.  Understood that this is how you wanted us to update; just saying because it probably inflated the count a bit with others doing the same.

[oldcat]

Due to much people fill the form i will close it at  8:00pm (EST)

thanks everyone

Congrats! I really love those e-coat ones.

[soveryscary]

Is there any way to edit my form? I submitted it too early, meant to hit back.

[Tekniqs]

Due to much people fill the form i will close it at  8:00pm (EST)

thanks everyone

Popular!  I submitted a second to update/modify/replace my first order.  Understood that this is how you wanted us to update; just saying because it probably inflated the count a bit with others doing the same.

same...i had to submit a second form to modify the original form.

[MTXjunkie]

I’m sad I didn’t see the closing and I’m happy I didn’t see the closing. I probably would have put in a second order if I would have gotten in under the deadline


Sent from my iPhone using Tapatalk Pro

[Oakelfire]

Absolutely in for two. Folks, don’t snooze on this one. I’ve been along for every Exclusive run and dude does it all right. Get in early and often! I have a hunch spots are going to fill quickly (<24 hours?) for this one.

We didn't even make it 12 hours!

Lots of people picking up 2 as well - probably hit the limit real quick!

[JubJubCity]

Absolutely in for two. Folks, don’t snooze on this one. I’ve been along for every Exclusive run and dude does it all right. Get in early and often! I have a hunch spots are going to fill quickly (<24 hours?) for this one.

We didn't even make it 12 hours!

Lots of people picking up 2 as well - probably hit the limit real quick!

Hoping I made it in time!!

[click clack jack]

I ordered red for a Jamon build. PC plate. Black name badge for pata negra. And sandblast A weight with black B weight 

[nickaster1]

I just went with E white and rose gold badge/weight. Actually have second thought about changing to Grey or MAO so it doesn’t overshadow my Tulip set

[foo4542]

Due to much people fill the form i will close it at  8:00pm (EST)

thanks everyone

Lucky all of a sudden I woke up in the middle of the night and submitted an entry.

[excluisve]

I am sort the spreadsheet cancel the repeat one

plz be patient wait me to post when done

[nickaster1]

Yeah I also made second form on top of the first one since I couldn’t decide

[Oakelfire]

I am sort the spreadsheet cancel the repeat one

plz be patient wait me to post when done

If you have any questions - send me a PM! I ordered 2 boards - don't want to have one canceled.

[geistmate]

Where are those pink keycaps from?

[Rob27shred]

Due to much people fill the form i will close it at  8:00pm (EST)

thanks everyone

Wow, that went super quick, congrats man! Glad I didn't wait to fill the form out, here I thought I was all super early since the GB was stated to run till the 9th. ) Now I got my fingers crossed I actually got in before 100 orders were submitted & I can get one!

[wt5now]

See the PM plz.

[nickaster1]

Due to much people fill the form i will close it at  8:00pm (EST)

thanks everyone

Wow, that went super quick, congrats man! Glad I didn't wait to fill the form out, here I thought I was all super early since the GB was stated to run till the 9th. ) Now I got my fingers crossed I actually got in before 100 orders were submitted & I can get one!

I think this GB is among one of the faster ones that he’s done over time. E7 didn’t all fly out like this if I remember correctly

[Starius]

I am sort the spreadsheet cancel the repeat one

plz be patient wait me to post when done

If you have any questions - send me a PM! I ordered 2 boards - don't want to have one canceled.

I am in the same situation. 
Due to how exclusive and desirable these boards are, I would feel lucky to get just one. 
But I've tried for a 2nd board as a gift for someone who has had rotten luck with keyboards for years and has never known the high end customizable keyboard community existed until just recently.  I thought this might be the key for him to step into a whole new world... 

[eyedrop]

I am in the same situation. 
Due to how exclusive and desirable these boards are, I would feel lucky to get just one. 
But I've tried for a 2nd board as a gift for someone who has had rotten luck with keyboards for years and has never known the high end customizable keyboard community existed until just recently.  I thought this might be the key for him to step into a whole new world... 

You're a good friend, hope you will get the second order.

[vtachkov]

I'm in for two as well. Couldn't keep my hands off em. Love that e-white and RGB polycarbonate.

[oldcat]

I just went with E white and rose gold badge/weight. Actually have second thought about changing to Grey or MAO so it doesn’t overshadow my Tulip set

Good choice!

[excluisve]

Orders check

https://docs.google.com/spreadsheets/d/1IwRaVVonheMmkqS1j02I3lflphKK55sutiRbX7XznwE/edit?

usp=sharing

I havent edit the spreadsheet just cancel the repeat one ,i will check each message and edit it


There have been almost 300 forms submitted. Several are likely duplicates, but we have far exceeded the 100 I intended. I am honor all who are in. Your support is awesome and I don’t want anyone who has submitted to miss out. This means the later orders may be slightly behind the others in shipping, but I will fulfill all orders.



thanks everyone who submitted!

[JubJubCity]

Orders check

https://docs.google.com/spreadsheets/d/1IwRaVVonheMmkqS1j02I3lflphKK55sutiRbX7XznwE/edit?

usp=sharing

I havent edit the spreadsheet just cancel the repeat one ,i will check each message and edit it


There have been almost 300 forms submitted. Several are likely duplicates, but we have far exceeded the 100 I intended. I am honor all who are in. Your support is awesome and I don’t want anyone who has submitted to miss out. This means the later orders may be slightly behind the others in shipping, but I will fulfill all orders.



thanks everyone who submitted!

You are amazing, thank you for honoring all who have submitted. I can't wait to pay!!!!

[Oakelfire]

Orders check

https://docs.google.com/spreadsheets/d/1IwRaVVonheMmkqS1j02I3lflphKK55sutiRbX7XznwE/edit?

usp=sharing

I havent edit the spreadsheet just cancel the repeat one ,i will check each message and edit it


There have been almost 300 forms submitted. Several are likely duplicates, but we have far exceeded the 100 I intended. I am honor all who are in. Your support is awesome and I don’t want anyone who has submitted to miss out. This means the later orders may be slightly behind the others in shipping, but I will fulfill all orders.



thanks everyone who submitted!

Awesome, thanks excluisve!