E6.5 - 65% custom keyboard (GROUP BUY FINISHED )

[Starius]

Show Image

Below is json and hex

Thank you for this, Exclusive!

Also worth noting, if anyone hasn't seen, you can see Jae put on the gasket in his build, starting at 1:36:37 mark:

Also.... this is going to be a good week for me... ;)

[excluisve]

Show Image

Below is json and hex

Thank you for this, Exclusive!

Also worth noting, if anyone hasn't seen, you can see Jae put on the gasket in his build, starting at 1:36 mark:

Also.... this is going to be a good week for me... ;)
(Attachment Link)

Thanks  :thumb:

[Kevadu]

Shipping group 4:

Show Image

Show Image

Maybe this sounds nitpicky but I really wish you would post these lists as actual text instead of screenshots so I could just do a ctrl-f to see if my name is there.

[s3vv4]

Shipping group 4:

Show Image

Show Image

Maybe this sounds nitpicky but I really wish you would post these lists as actual text instead of screenshots so I could just do a ctrl-f to see if my name is there.

You are right, this sounds very nitpicky

[danielucf]

You are right, this sounds very nitpicky

Seems like a perfectly reasonable request to me. I've just been looking at the name on the bottom of the list, going to the document and ctrl-f to see how close it is to me. Round 5 can't come soon enough!

[DukeEsquire]

You are right, this sounds very nitpicky

Seems like a perfectly reasonable request to me. I've just been looking at the name on the bottom of the list, going to the document and ctrl-f to see how close it is to me. Round 5 can't come soon enough!

Your process seems much harder than just looking at the list.

I think it look less than 3 seconds to see my name on the list using my phone.

[danielucf]

You are right, this sounds very nitpicky

Seems like a perfectly reasonable request to me. I've just been looking at the name on the bottom of the list, going to the document and ctrl-f to see how close it is to me. Round 5 can't come soon enough!

Your process seems much harder than just looking at the list.

I think it look less than 3 seconds to see my name on the list using my phone.

Sure, but if you're name is not on the list, and you want to see when it might be on the list...

[Rob27shred]

You are right, this sounds very nitpicky

Seems like a perfectly reasonable request to me. I've just been looking at the name on the bottom of the list, going to the document and ctrl-f to see how close it is to me. Round 5 can't come soon enough!

Your process seems much harder than just looking at the list.

I think it look less than 3 seconds to see my name on the list using my phone.

Sure, but if you're name is not on the list, and you want to see when it might be on the list...

[spakecdk]

What is an extra oring? Extra gaskets?

[bball2]

What is an extra oring? Extra gaskets?

Does the base set include a gasket already?

[Visionaire]

Yes, every kit automatically comes with a gasket. You can just ask for an extra if you want.

[bball2]

Yes, every kit automatically comes with a gasket. You can just ask for an extra if you want.

Gotcha, thanks! 

[Auxo]

A couple of pictures of today's build

IF ANYONE KNOWS HOW TO ENABLE ISO LEFT SHIFT ON VIA PLS HELP LOL. My VIA config only shows ANSI

[excluisve]

Shipping group 5:







If you have two or three spots i will jump in next time ship together .


please check you order on https://docs.google.com/spreadsheets/d/1_XBfjVO2GSS7VHBJxmqgLTFnqTmt0sZhLu4E1zQHBhw/edit?usp=sharing

then send me shipping details like this format

Geekhack ID:
Paypal     ID:
Real name :
phone call :
address :  street - status /city - country
zip code :

I would rather send message to me on discord(Exclusive#8666) or PM me on here

Estimate shipping fee :
                    asia - 40$ usa - 48$  Europe -Australia- 55$

Extra oring price $12  if you need extra i will add price in shipping invoice

Thanks

[Rob27shred]

Shipping group 5:

Show Image

Show Image

If you have two or three spots i will jump in next time ship together .


please check you order on https://docs.google.com/spreadsheets/d/1_XBfjVO2GSS7VHBJxmqgLTFnqTmt0sZhLu4E1zQHBhw/edit?usp=sharing

then send me shipping details like this format

Geekhack ID:
Paypal     ID:
Real name :
phone call :
address :  street - status /city - country
zip code :

I would rather send message to me on discord(Exclusive#8666) or PM me on here

Estimate shipping fee :
                    asia - 40$ usa - 48$  Europe -Australia- 55$

Extra oring price $12  if you need extra i will add price in shipping invoice

Thanks

YES!

[Mcnos]

Finished building mines. 

[Rob27shred]

Finished building mines. 

Very nice! Where in world did you find NOS vint blacks?

[Wongstongs]

Finished building mine today, little typing test below.

[Undrcontrl]

Got mine in yesterday (SUPER fast shipping!) and it was super clean!

Now for the sad reality...all these guys building theirs and using them and mine will sit in its original package on a shelf for some unknown amount of time. 

[Mcnos]

Got mine in yesterday (SUPER fast shipping!) and it was super clean!

Now for the sad reality...all these guys building theirs and using them and mine will sit in its original package on a shelf for some unknown amount of time. 

Sounds like it's one more to add to your backlog. 

[Undrcontrl]

Got mine in yesterday (SUPER fast shipping!) and it was super clean!

Now for the sad reality...all these guys building theirs and using them and mine will sit in its original package on a shelf for some unknown amount of time. 

Sounds like it's one more to add to your backlog. 

Bro, you aren't even kidding.
Have somewhere around 6 unbuilt kits right now and still no major intent to build any of them.

[rossfromfriends]

[razor_blade]

Got mine in yesterday (SUPER fast shipping!) and it was super clean!

Now for the sad reality...all these guys building theirs and using them and mine will sit in its original package on a shelf for some unknown amount of time. 

Sounds like it's one more to add to your backlog. 

Bro, you aren't even kidding.
Have somewhere around 6 unbuilt kits right now and still no major intent to build any of them.

My keyboard backlog is my new Steam game backlog...sigh...

[itunesacc]

If anyone want to sell his spot and this keyboard, PM me Plz! Especially, E-white color case!

[Undrcontrl]

Got mine in yesterday (SUPER fast shipping!) and it was super clean!

Now for the sad reality...all these guys building theirs and using them and mine will sit in its original package on a shelf for some unknown amount of time. 

Sounds like it's one more to add to your backlog. 

Bro, you aren't even kidding.
Have somewhere around 6 unbuilt kits right now and still no major intent to build any of them.

My keyboard backlog is my new Steam game backlog...sigh...

Sounds accurate!

Unlike Steam, where I am required to keep the games after purchase, I tend to get to about 10 deep and then sell a few. By that point I will only have built 1-2 and sold one or both of those!

[slxdegrees]

A couple of pictures of today's build

IF ANYONE KNOWS HOW TO ENABLE ISO LEFT SHIFT ON VIA PLS HELP LOL. My VIA config only shows ANSI

(Attachment Link) (Attachment Link)

Use QMK configurator and flash the layout to your board.

[Egobean]

Let me know if anyone is willing to sell their keyboard im very interested in one

[chickenNwaffles]

Could someone inform me what the issue is regarding screw-in stabilizers with the gasket mount? I don't have any clip in ones on hand, so I was wondering if anyone built theirs with screw-ins.

[nephlock]

Got mine built up and thought I'd share it as well! LOVE the color on this one.

Wathet WK w/block
Red badge & plate
MX Zilents
GMK Minimal

[dantambok]

Just got mine today.

I was wondering if anyone built theirs with a polycarb halfplate? This is what i got now i’m afraid it might be too bouncy or flexy 

[cldskt]

Arrived within one business day. Thanks for the smooth GB E!

[petamva]

Night flex!
Thank you exclusive!

[Bryan]

Got mine. So happy with the quality and appearance of the keyboard. My only regret is not getting a Gold PVD Brass name plate with some text/default text on it.

This is my first custom GB board, and I really enjoy the fun this hobby has become for me (minus the waiting times). Now that I have a few boards and keysets it is time to relax and let the wallet rest.

Specs:

• Exclusive E6.5 (Polycarb with blocker)
• Gateron Black Inks (Krytox 205g0)
• Gold PVD Brass weight and full plate
• GMK Camping
• NovelKeys Bento Deskmat

[elmo]

Board just arrived and it just looks so awesome.
Can't stop looking at it 

[vncsnty]

Any link how to flash? Can this be flash using QMK or VIA?

[excluisve]

Any link how to flash? Can this be flash using QMK or VIA?

Yea,you can dowload the hex and json (check my last few post

QMK and via were support (0.3.6 version and the via hex files

if still have any question pm me or find me on discord .

[bball2]

I was just looking at the gasket mount installation guide:

https://i.imgur.com/JmvKx9S.jpg

And step 2 says not to screw the plate into the top piece yet, but step 3 says to put the bottom piece next. So are you not supposed to secure the plate onto the top piece?

Also what's everyone using to program it? I tried via (0.3.6 and the latest 0.40) but neither one recognize this board. I also downloaded the json file and tried using uploading it to:

https://config.qmk.fm

But I get an error along the lines of "doesn't support uploading kbfirmware json files"

[Esheu2]

I was just looking at the gasket mount installation guide:

https://i.imgur.com/JmvKx9S.jpg

And step 2 says not to screw the plate into the top piece yet, but step 3 says to put the bottom piece next. So are you not supposed to secure the plate onto the top piece?

Also what's everyone using to program it? I tried via (0.3.6 and the latest 0.40) but neither one recognize this board. I also downloaded the json file and tried using uploading it to:

https://config.qmk.fm

But I get an error along the lines of "doesn't support uploading kbfirmware json files"

To my understanding, if you're using the gasket, you do not secure it to the top piece. The gasket should kinda friction fit the plate and pcb combo into the case.

For the error message you're getting, that means that the .json file you're using is meant for https://kbfirmware.com/ not qmk config.

[dannyny]

any extras?

[cicada]

Got mine built up and thought I'd share it as well! LOVE the color on this one.

Wathet WK w/block
Red badge & plate
MX Zilents
GMK Minimal

Show Image

My favorite combination so far. Very clean with a hint of minimalism. Great photography too.

[ever9415]

When will the last group begin shipping? I'm waiting too long.

[excluisve]

Last group:






please check you order on https://docs.google.com/spreadsheets/d/1_XBfjVO2GSS7VHBJxmqgLTFnqTmt0sZhLu4E1zQHBhw/edit?usp=sharing

then send me shipping details like this format

Geekhack ID:
Paypal     ID:
Real name :
phone call :
address :  street - status /city - country
zip code :

I would rather send message to me on discord(Exclusive#8666) or PM me on here

Estimate shipping fee :
                    asia - 40$ usa - 48$  Europe -Australia- 55$

Extra oring price $12  if you need extra i will add price in shipping invoice

Thanks

[JubJubCity]

Yeah last group can't wait 

Sent you a message on Discord with the required info.

[cyyz]

i sent a pm here on geekhack

[habyss]

Sent PM

[Peiweisgreat]

sent pm on disc

[MPAstudio]

SENT PM

[Rob27shred]

It's beautiful! 😢

[excluisve]

Get all pm and message but cant reply in time sorry that .

keyboards were shipped out already but tracking number will come out tmr .

Until now E6.5 finished

thanks all 

[lanyusea]

Get all pm and message but cant reply in time sorry that .

keyboards were shipped out already but tracking number will come out tmr .

Until now E6.5 finished

thanks all