[GB] KAT Cyberspace - FINISHED - 720k units sold!

[KVLT]

Show Image

I hope this better explains how each of the alpha kits will look

That picture is super helpful.  I didn't realize the purple will glow.

the glow of the purple has a bit more blue of a glow and i friggin love this set more than before

[ttom]

great sales, much deserved <3

[saltimate]

will the box60 come with the stickers when ordered from dailyclack?
the previews on dailyclack aren't showing them...

[Ulliam]

will the box60 come with the stickers when ordered from dailyclack?
the previews on dailyclack aren't showing them...

They will for sure (:

[Vizir]

will the boardwalk pcb work with the box case?

[Hell-es]

The picture is super helpful - wish there were raw blanks or/and mods for a white bulit

[Lazy_Borzoi]

The picture is super helpful - wish there were raw blanks or/and mods for a white bulit

I second that!
Maybe next round?

[The.Ryan.Gamer]

Hi. I'm from Asia, where to i buy? ZF appears to be China only.

[Ulliam]

Hi. I'm from Asia, where to i buy? ZF appears to be China only.

https://en.zfrontier.com/collections/keyreative/products/kat-cyberspace (:

[xwind]

I am ready to pull the trigger on a GB but lemme ask something first:

- Does the stepped CapsLock has an off center stem? I can always use 1.25u CapsLock instead, but buying 40's kit for one cap is a bit of an overkill.

- Does the 6.25u Spacebar has an additional cherry style 11.9 mm off center stem as well?

Thanks!

[I5 20VT]

So first post here. I´m quite new to the hobby, been stalking here for some time and joined the occasional GB. Mechs is quite the rabbit hole...
With that said, this GB peaked my interest, but I have a silly question.

Say, I wanted color matched alphas for a ISO Nordic 75% keyboard, what kits do I need?
The Alpha/Alpha + Omega/North + Mods?
Or Omega/TKL + Omega/North + Mods?

I´m asking because the Alpha/Alpha and Omega/North looks like it has off white legends while TKL kit has greenish legends. Sorry for the confusion.

[Ulliam]

I am ready to pull the trigger on a GB but lemme ask something first:

- Does the stepped CapsLock has an off center stem? I can always use 1.25u CapsLock instead, but buying 40's kit for one cap is a bit of an overkill.

- Does the 6.25u Spacebar has an additional cherry style 11.9 mm off center stem as well?

Thanks!

- Like a normal stepped caps? as in one used for a hhkb layout? if so then yes.
- It does

So first post here. I´m quite new to the hobby, been stalking here for some time and joined the occasional GB. Mechs is quite the rabbit hole...
With that said, this GB peaked my interest, but I have a silly question.

Say, I wanted color matched alphas for a ISO Nordic 75% keyboard, what kits do I need?
The Alpha/Alpha + Omega/North + Mods?
Or Omega/TKL + Omega/North + Mods?

I´m asking because the Alpha/Alpha and Omega/North looks like it has off white legends while TKL kit has greenish legends. Sorry for the confusion.

Alpha:Alpha + North + Mods is what you want.
The TKL kit is just designed to cover "normie" ansi tkl's like the filco etc at a decent price.

[xwind]

- Like a normal stepped caps? as in one used for a hhkb layout? if so then yes.

Never had to deal with HHKB in person, and Google was not helpful in that regard either. Could you explain for a noob again: where is the stem located on the 1.75u Stepped CapsLock?

I need something like this:

[Ulliam]

- Like a normal stepped caps? as in one used for a hhkb layout? if so then yes.

Never had to deal with HHKB in person, and Google was not helpful in that regard either. Could you explain for a noob again: where is the stem located on the 1.75u Stepped CapsLock?

I need something like this:

Show Image

You're good!

[I5 20VT]

Alpha:Alpha + North + Mods is what you want.
The TKL kit is just designed to cover "normie" ansi tkl's like the filco etc at a decent price.

Thank you for clarifying, much appreciated.

[Vizir]

No one knows if the boardwalk PCB will work with the box case?

Sent from my Pixel 4 XL using Tapatalk

[Ulliam]

No one knows if the boardwalk PCB will work with the box case?

Sent from my Pixel 4 XL using Tapatalk

I'm going to assume yes, because it states the boardward is designed to fit in standard 60% cases and thats what this is. Check out the DZ60 pcb https://www.reddit.com/r/MechanicalKeyboards/comments/532yj4/60_pcb_dimensions/ should help you check.

[Vizir]

No one knows if the boardwalk PCB will work with the box case?

Sent from my Pixel 4 XL using Tapatalk

I'm going to assume yes, because it states the boardward is designed to fit in standard 60% cases and thats what this is. Check out the DZ60 pcb https://www.reddit.com/r/MechanicalKeyboards/comments/532yj4/60_pcb_dimensions/ should help you check.

Thanks!

Sent from my Pixel 4 XL using Tapatalk

[Ulliam]

Currently running a Giveaway on my Discord server, check the top of the first post for more info or heres a link to join (: https://discord.gg/njbnkAF Thank you everyone for helping make this set happen I've been beyond blown away by the support i've received so far (:

[xwind]

- Like a normal stepped caps? as in one used for a hhkb layout? if so then yes.

Never had to deal with HHKB in person, and Google was not helpful in that regard either. Could you explain for a noob again: where is the stem located on the 1.75u Stepped CapsLock?

I need something like this:

Show Image

You're good!

Many thanks, ordered! And thanks for work!

[Yilk81]

Ordered!
Raw alphas (common! these are just too cool)
eng/katakana alphas (extreme high cyber feel over the rest of them)
colevrak kit (i'll throw these in for my colemak layout. Might make it look more cyber to have single legend sprinkled in. We'll see. not a fan of eng alphas so didn't go for that one)
Ortho mods (split keebs only for this guy. Thanks for splitting up the 40's and ortho )

[dvorcol]

More

<-- progress

[tomatohammado]

SO excited for this set! The Icon Mods picture doesn't explicitly say the sizing of the R1 Shift keys, I want to confirm that it include the following sizes:

2.75U
2.25U x2
1.75U
1.25U

It looks like it does but I wanted to make sure, thank you!

[Ulliam]

SO excited for this set! The Icon Mods picture doesn't explicitly say the sizing of the R1 Shift keys, I want to confirm that it include the following sizes:

2.75U
2.25U x2
1.75U
1.25U

It looks like it does but I wanted to make sure, thank you!

They do indeed.

[Ashen_21]

Bought and so keen!

[dvorcol]

More

<-- progress

[Ulliam]

Show Image

Show Image

Thank you so much for these dude, your work is highly appreciated. I can bearly setup a spreadsheet (as you have seen)

[dvorcol]

Show Image

Show Image

Thank you so much for these dude, your work is highly appreciated. I can bearly setup a spreadsheet (as you have seen)

You're running a successful group buy, that's quite an accomplishment.  And your spreadsheet isn't bad, either.

[Ulliam]

Goldenstar Keycaps

Raffle on August 23rd: https://discord.gg/m7qUSR5
https://www.instagram.com/goldenstar_keycap/


Latralum

(special 1 of 2 GiD Edition)

Date TBD
https://www.instagram.com/latrialum/


Goodluck!

[pandaman97]

Will you have prototype or something similar? Anyway dope set  I think this will be my first gb 

[hotnoodle666]

Hey I have a quick question on the Rama keycaps. After manufacturing, will those keycaps be shipped to Rama Works first then distributed to all the vendors worldwide, or vendors like Zfrontier will get the shipments directly from the manufacturer (I assume the factory is in China)? Just trying to figure out the fastest way to get the delivery. Thanks.

[Ulliam]

Hey I have a quick question on the Rama keycaps. After manufacturing, will those keycaps be shipped to Rama Works first then distributed to all the vendors worldwide, or vendors like Zfrontier will get the shipments directly from the manufacturer (I assume the factory is in China)? Just trying to figure out the fastest way to get the delivery. Thanks.

I'd assume everything ships out of Rama.works for qc etc (:

[VagueOrigin]

Hi, im using a 60% ansi layout, I was curious if the novelties cover the mods or would I need icon kit?

Sent from my SM-G975U using Tapatalk

[nathanchere]

[edit] never mind, I see the photo of the glow effect now. I'm in.

[Pizza_on_Pineapple]

Hi, im using a 60% ansi layout, I was curious if the novelties cover the mods or would I need icon kit?

Sent from my SM-G975U using Tapatalk

You need one of the mod kits or the TKL kit for most of the modifier keys. The novelties are accent keys for enter, the bottom row and various 1u key across the three top rows.

[VagueOrigin]

Hi, im using a 60% ansi layout, I was curious if the novelties cover the mods or would I need icon kit?

Sent from my SM-G975U using Tapatalk

You need one of the mod kits or the TKL kit for most of the modifier keys. The novelties are accent keys for enter, the bottom row and various 1u key across the three top rows.

Thanks, appreciate it! Just seeing if I could shave a set off at checkout, my wallets on fire lol.

Sent from my SM-G975U using Tapatalk

[Magnificent Bureaucrat]

I've been perving on Cyberspace for a while but only just noticed you can get full ISO coverage for the low-low cost of two kits! Now I'm going to spend the rest of the month going back and forth trying to justify the purchase

No idea what I'm going to do with the BBox60 case I've already ordered but at the price point it would be rude not to.

[hotnoodle666]

Hey I have a quick question on the Rama keycaps. After manufacturing, will those keycaps be shipped to Rama Works first then distributed to all the vendors worldwide, or vendors like Zfrontier will get the shipments directly from the manufacturer (I assume the factory is in China)? Just trying to figure out the fastest way to get the delivery. Thanks.

I'd assume everything ships out of Rama.works for qc etc (:

Makes sense. Thank you!!

[Ulliam]

a massive shoutout to these amazing humans for their fan art <3

By Noshk#3676


https://www.instagram.com/uberchango/

[Yilk81]

I wanted to show off the set to a good friend but there are actually not that many renders. How does one get into the render game and help visualize sets?

[pandaman97]

If i need this to my 60% tsangan layout (not include step caps), will Alpha and Beta/40s complete it?

[tzarc]

Do my eyes deceive me?!
Do the betas actually include an R3 1U |\ key?
I tried to get it addressed on the GB thread but didn’t seem to get it sorted back then.... it’s in now?

EDIT: Sweet, confirmed on discord chat history. Time to go order way too many sets

[Pizza_on_Pineapple]

If i need this to my 60% tsangan layout (not include step caps), will Alpha and Beta/40s complete it?

No, you're missing 1.75u caps, 1.5u tab, 7u spacebar and 2.25u left shift and enter keys.

[LASERman Projects]

No, you're missing 1.75u caps, 1.5u tab, 7u spacebar and 2.25u left shift and enter keys.

I am pretty noob but.. what is the size of the second longer spacebar at the bottom of the mods kit if not 7u?
Also are you sure that among all that various shift keys none is 2.25u?

[Radium]

Why the color of alpha in TKL set is different from Alpha set. I really love the color of tkl but this set is not fit my 65% keyboard.

[Pizza_on_Pineapple]

No, you're missing 1.75u caps, 1.5u tab, 7u spacebar and 2.25u left shift and enter keys.

I am pretty noob but.. what is the size of the second longer spacebar at the bottom of the mods kit if not 7u?
Also are you sure that among all that various shift keys none is 2.25u?

pandaman97 was talking about the Beta/40s kit which will not cover a tsangan layout. Both Beta/Icon and Beta/Text mods will cover that layout though, sorry for the confusion.

[pandaman97]

If i need this to my 60% tsangan layout (not include step caps), will Alpha and Beta/40s complete it?

No, you're missing 1.75u caps, 1.5u tab, 7u spacebar and 2.25u left shift and enter keys.

Wow, that miss like .. a lots lol  ) I guest Alpha and Mods eventually  Thanks you

[Drakenocas]

Would 2 alphas, 1 mod about cover 2 boards, or need 40s for good measure?  What's the best route for 65% and a 60 or 50? I said no more this year, but the price is too good to pass up. 

[Pizza_on_Pineapple]

Would 2 alphas, 1 mod about cover 2 boards, or need 40s for good measure?  What's the best route for 65% and a 60 or 50? I said no more this year, but the price is too good to pass up.

2 alpha kits and a mod kit can cover a 60% and a 65%. Just have in mind that you'll have to use split and 2u backspace as well as ISO and ANSI enter on your boards. Also make sure that you use different bottom rows on both keyboards. There's also only a single R4 Esc key but that's easily substitutable.
If I were you I'd add the novelties instead of the 40s kit to your order because that adds additional (ANSI) enter, R4 and a bunch of bottom row keys. Also they look really cool That's assuming of course that you don't plan on building anything sub 50%.

[dvorcol]

More

<-- progress