geekhack Projects > DIY Discussions ARCHIVE

m15 Remake

<< < (2/2)

lowpoly:
Those are the correct links. :) There is no pcb, just the membrane on an M.

bhtooefr:
Well, technically, there is a PCB in the Model M. It just has nothing to do with the keyswitches, and you wouldn't cut it at all. (It's what the controller is on.)

lowpoly:
And the controller is going to be replaced. The connectors on the controller board are still needed. But these could be taken from old rubber domes or bought new.

ed_:
Thanks for the clarification;  I got a bad sense of scale from the pictures and thought the two membranes sandwiched a PCB; one separate from the controller.

Now I assume that I can take the membranes from two keyboards and simply fold the unused halves under the key mounts, and have both sets of membranes connect to the controller.

lowpoly:

--- Quote from: ed_;21286 ---Now I assume that I can take the membranes from two keyboards and simply fold the unused halves under the key mounts, and have both sets of membranes connect to the controller.
--- End quote ---

Unless I'm missing something, this could actually work. Good idea.

Navigation

[0] Message Index

[*] Previous page