This is awesome. Im totally joining. Just wondering though what layouts are compatible with your carbon fiber plate? Is it universal?
Hey Bazh would happy plates be possible? Just remove the two bottom corner holes ;)
I saw the green side bars and was pumped then disappointed by the order thread.
Definitely interested in joining but need to think about it now.
Hey Bazh would happy plates be possible? Just remove the two bottom corner holes ;)
Do you need that as an extra plate or just the plate that comes with the set? I can make a note and do that for ya, no problem :thumb:
Hey Bazh would happy plates be possible? Just remove the two bottom corner holes ;)
Do you need that as an extra plate or just the plate that comes with the set? I can make a note and do that for ya, no problem :thumb:
I didn't mentioned it when i filled out the form. Can I edit my form that it notes it? ;D
I saw the green side bars and was pumped then disappointed by the order thread.
Definitely interested in joining but need to think about it now.
I saw the green side bars and was pumped then disappointed by the order thread.
Definitely interested in joining but need to think about it now.
yeah green is what I like so much (hence I made the prototype) but then the manufacturer told me that it (along with some other colors I mentioned) is a color mix so we need to test consistency and reproduciblity to make sure it will be the same for everyone without large batch. :(
Nice work! Just right on time I got some new swes in the mail.
I'm really interested in purple and green anodizing, got an idea about Evangelion unit 01 color scheme.
BTW, any ETA on this?
Submitted but now so many second thoughts about the colors. :confused:
No worries, there are plenty of colors offered, I will be playing around with them. :pNice work! Just right on time I got some new swes in the mail.
I'm really interested in purple and green anodizing, got an idea about Evangelion unit 01 color scheme.
BTW, any ETA on this?
Sorry mate, those color is not available at the moment :( I hope you enjoy the current options, if this GB turns out good then you can expect another batch with those colors too, I try my best :thumb: remember you can also buy extra parts to mix and match :thumb:
Manufacturing should be done expecting one month after payment, then we'll go to sorting and shipping.
That's damn cool! I like it!
A Question:
is the stand the same as the one of duck Orinon/Viper, i.e. there could be LED inside.
and
the total kit includes:
2x aluminium bars (top and bottom)
2x aluminium side bars
1x carbon fiber switch plate
1x carbon fiber back plate*
2x aluminium stands
1x tier
am I correct?
That's damn cool! I like it!
A Question:
is the stand the same as the one of duck Orinon/Viper, i.e. there could be LED inside.
and
the total kit includes:
2x aluminium bars (top and bottom)
2x aluminium side bars
1x carbon fiber switch plate
1x carbon fiber back plate*
2x aluminium stands
1x tier
am I correct?
1. No it's not since the backplate will not have holes like the Duck's one.
2. I don't know what you meant by "1x tier" but basically the others that you stated is right.
Damn, I regret buying a Korean custom after seeing this!An interesting sentiment!
I saw the green side bars and was pumped then disappointed by the order thread.
Definitely interested in joining but need to think about it now.
yeah green is what I like so much (hence I made the prototype) but then the manufacturer told me that it (along with some other colors I mentioned) is a color mix so we need to test consistency and reproduciblity to make sure it will be the same for everyone without large batch. :(
So... should I get blue long bars with orange sidebars or the other way around?You guess :p
Is there a preview of the deep blue? Sad for no purple/green :P
Any chance you have some side shots?
Can't decide on stands color just from the mock up.
Not sure if this was addressed in the IC phase, but did you finalize on how you plan on sealing the carbon fiber after cutting the plate?We usually seal our RC parts which exposing edge when in use, but the plate's edges is not exposed and also not subject to heavy bending force - which is the main reason for the edge's fray. I think it's not the problem here. Plates is cleaned to remove all chips
What pcb that can be used with these? and hows the feel of the carbon plate this board is really unique. I personally really like it :thumb:
I think I'll be in on this GB, but I'll have to wait until I get paid, to make certain that I have the funds available!
Damn, I regret buying a Korean custom after seeing this!(http://onebit.us/x/u/Daco/0pDADai0Du.png)
Really beautiful, really beefy. I'll have to think about it.
These look awesome :D
I certainly have a guess. And it involves Skidata+ :PSo... should I get blue long bars with orange sidebars or the other way around?You guess :pShow Image(https://scontent-arn2-1.xx.fbcdn.net/hphotos-xaf1/v/t35.0-12/12499178_1110492322294376_283494302_o.jpg?oh=fe49740d8b5daaf598fe4fb0b7a258ce&oe=5690F7AF)
This is another prototype that did not make it to the final, but the color is spot on :cool:
What kind of alu is used in this case?
Do you support alps plate?What kind of alu is used in this case?
It's 6061 :D
Do you support alps plate?What kind of alu is used in this case?
It's 6061 :D
is the combination in the first pic available? looks like black & grey.
is the combination in the first pic available? looks like black & grey.Hi,
Basically we're good to go at 10 setsSo here's some update on how 'good to go' we are right now:
I'll definitely be getting in on this. I just need to decide on colours.
Beautiful work bazh & foggyflute!
I'm definitely super excited about this, been watching the IC thread for a long time. Do you ever think there will be a Sky Blue option in the future? I don't really want to settle with a color that I'm "ok" with am dying for a sky blue option.
I'm definitely super excited about this, been watching the IC thread for a long time. Do you ever think there will be a Sky Blue option in the future? I don't really want to settle with a color that I'm "ok" with am dying for a sky blue option.
Noted, when green and purple available, sky blue will also available.
I'm definitely super excited about this, been watching the IC thread for a long time. Do you ever think there will be a Sky Blue option in the future? I don't really want to settle with a color that I'm "ok" with am dying for a sky blue option.
Noted, when green and purple available, sky blue will also available.
I'm definitely super excited about this, been watching the IC thread for a long time. Do you ever think there will be a Sky Blue option in the future? I don't really want to settle with a color that I'm "ok" with am dying for a sky blue option.
Noted, when green and purple available, sky blue will also available.
I'll jump on this when green is available!
I also have no money now.
I think I'll wait for this then!I'm definitely super excited about this, been watching the IC thread for a long time. Do you ever think there will be a Sky Blue option in the future? I don't really want to settle with a color that I'm "ok" with am dying for a sky blue option.
Noted, when green and purple available, sky blue will also available.
thx! i think i'll jump on this when grey is available! :thumb:is the combination in the first pic available? looks like black & grey.Hi,
The gray sidebar currently not available for this group buy, but we're working on make those color available for mass production.
We said:QuoteBasically we're good to go at 10 setsSo here's some update on how 'good to go' we are right now:Long bars, fresh off the milling machine:Show Image(http://i.imgur.com/4NsSqzm.jpg)
Creating tracks for plates:Show Image(http://i.imgur.com/JepPtjW.jpg)
We aim for finish machining the first batch right before order closing date, fast enough for you guys right? :cool:
I'm Bazh's partner (kinda obvious, but here it is), and we're serious at start-up a keyboard company ;D
If you do alps plate I will sure to join this gb or do you have any plan on making a tkl design?
OK then I will wait for the aps plate!If you do alps plate I will sure to join this gb or do you have any plan on making a tkl design?
We placed order on a few alps switches to test the alps plate, coming in next batch for sure.
wondering when there will be the next round of GB?
I'd like to wait for the second batch if there will be more color options, and, it's not too far away...
That looks great. It looks like it slides in together with the plate to form a tight bond?wondering when there will be the next round of GB?
I'd like to wait for the second batch if there will be more color options, and, it's not too far away...
Very soon...
UPDATE:
Changed a little bit on stands design: no more left and right, now they're identical, cut through to reduce weight, better joints with plates for future mix n match with multi weaven housings :)Show Image(http://i.imgur.com/VV1BtW9.png)
That looks great. It looks like it slides in together with the plate to form a tight bond?wondering when there will be the next round of GB?
I'd like to wait for the second batch if there will be more color options, and, it's not too far away...
Very soon...
UPDATE:
Changed a little bit on stands design: no more left and right, now they're identical, cut through to reduce weight, better joints with plates for future mix n match with multi weaven housings :)Show Image(http://i.imgur.com/VV1BtW9.png)
That looks great. It looks like it slides in together with the plate to form a tight bond?wondering when there will be the next round of GB?
I'd like to wait for the second batch if there will be more color options, and, it's not too far away...
Very soon...
UPDATE:
Changed a little bit on stands design: no more left and right, now they're identical, cut through to reduce weight, better joints with plates for future mix n match with multi weaven housings :)Show Image(http://i.imgur.com/VV1BtW9.png)
Yes it is! in that way the stands will be held in place by the frame and the plate so no screws needed.
By the way guys, we are good to go now, do you want to just close and finish the buy now or to wait for more? Either way, I can start sending invoices in a couple of days, stay tuned :thumb:
Well I think a lot of people including myself are waiting for the second round when the options are more refined.
If you want to run this as a precursor group buy to a larger second run I'm confident that you won't lose on sales.
Well I think a lot of people including myself are waiting for the second round when the options are more refined.
If you want to run this as a precursor group buy to a larger second run I'm confident that you won't lose on sales.
This!
I'd love to be in the first round but I really want Green anodizing for the bars.
what colors are in the first picture in the first post sir? the blacks of the long bars look lighter than the side bars.
If a second round could be organized within a couple of months or so (six months at most?) then it might be best to close it now, and do this run. If it'll be longer than that, you should wait so I can get my order in ;)That looks great. It looks like it slides in together with the plate to form a tight bond?wondering when there will be the next round of GB?
I'd like to wait for the second batch if there will be more color options, and, it's not too far away...
Very soon...
UPDATE:
Changed a little bit on stands design: no more left and right, now they're identical, cut through to reduce weight, better joints with plates for future mix n match with multi weaven housings :)Show Image(http://i.imgur.com/VV1BtW9.png)
Yes it is! in that way the stands will be held in place by the frame and the plate so no screws needed.
By the way guys, we are good to go now, do you want to just close and finish the buy now or to wait for more? Either way, I can start sending invoices in a couple of days, stay tuned :thumb:
If a second round could be organized within a couple of months or so (six months at most?) then it might be best to close it now, and do this run. If it'll be longer than that, you should wait so I can get my order in ;)
Oooooo then that sounds good to me!!!If a second round could be organized within a couple of months or so (six months at most?) then it might be best to close it now, and do this run. If it'll be longer than that, you should wait so I can get my order in ;)
Second batch will happen as soon as we finish this batch and extra anodize colors are good enough for our product (aesthetic, re-producibility, dye and consumable pricing, capital cost for rarely used colors...).
We count days and weeks, not month :)
what colors are in the first picture in the first post sir? the blacks of the long bars look lighter than the side bars.
That's grey sir, currently not available yet.
what colors are in the first picture in the first post sir? the blacks of the long bars look lighter than the side bars.
That's grey sir, currently not available yet.
ah, ok. and another thing sir, will the plate bottom row support hhkb layout? something like X 1.5x 7x 1.5x X where X is empty/blocked?
If a second round could be organized within a couple of months or so (six months at most?) then it might be best to close it now, and do this run. If it'll be longer than that, you should wait so I can get my order in ;)
Second batch will happen as soon as we finish this batch and extra anodize colors are good enough for our product (aesthetic, re-producibility, dye and consumable pricing, capital cost for rarely used colors...).
We count days and weeks, not month :)
This!
I'd love to be in the first round but I really want Green anodizing for the bars.
I have a two question.
Q1) Is this Weaven 60% keyboard housing compatible with BeastMask's 60% PCB(ex. B.face X2 PCB)?
Q2) Where is shipping area?
. ex) From Finland to Korea? I am korean.
I can't wait for the round 2 that will have an alps plate option and more colour :thumb:I have a two question.
Q1) Is this Weaven 60% keyboard housing compatible with BeastMask's 60% PCB(ex. B.face X2 PCB)?
Q2) Where is shipping area?
. ex) From Finland to Korea? I am korean.
Yes it is compatible with most of the custom 60% pcb on the market, BeastMask's ones including. (Though I never tried a B.Face, on the original project I used a FaceU)
Shipping is from Vietnam
:thumb:
What would be the go to pcb for this? I've never tried 60% before (just 66%) and I would like to have a good looking programmable pcb for this. Preferably in black with led support.This one perhaps. (http://winkeyless.kr/product/b-face-x2-pcb/)
UPDATE:
New plate ready and waiting for new stands.Show Image(http://i.imgur.com/4HsbHfk.jpg)
Take photo of final product kinda not really make any difference compare to original one, I'm thinking about making a hands-on video... :rolleyes:
Hey bazh, would you happen to have some anodizing colour samples? It would really help make up my mind :)
Shipping is from Vietnam
:thumb:
Shipping is from Vietnam
:thumb:
to worldwide? im in china. looking forward to round 2 :thumb:
The photos are great, but I'm a little bit confused. Are these pre-production units, or have you already gone into production. :confused:
The photos are great, but I'm a little bit confused. Are these pre-production units, or have you already gone into production. :confused:
Honestly, I'm not a patient man, so waiting soooo longggg for production and shipment as a buyer of other group buys is not my thing :blank:
So, for my own group buy, instead of waiting for payments, I use my own capital to start the production stage (deadline is next Monday and we're on time, no delay happened despite stands design change). So as soon as payments go through, anodizing for chosen colors will take place and buyer get the final product in less than a month (hope so), include shipping time. It's a hybrid of having goods stocked and normal group buy.
Sorry for my bad English, I hope the paragraph above make sense to you :D
Indeed it did make perfect sense, and that's an amazing way to do it. I love it!!! Any idea how long anodizing will take?The photos are great, but I'm a little bit confused. Are these pre-production units, or have you already gone into production. :confused:
Honestly, I'm not a patient man, so waiting soooo longggg for production and shipment as a buyer of other group buys is not my thing :blank:
So, for my own group buy, instead of waiting for payments, I use my own capital to start the production stage (deadline is next Monday and we're on time, no delay happened despite stands design change). So as soon as payments go through, anodizing for chosen colors will take place and buyer get the final product in less than a month (hope so), include shipping time. It's a hybrid of having goods stocked and normal group buy.
Sorry for my bad English, I hope the paragraph above make sense to you :D
That makes perfect sense. That's a fantastic turnaround, I'm sure everybody will be glad to get their boards so fast. :thumb:
Indeed it did make perfect sense, and that's an amazing way to do it. I love it!!! Any idea how long anodizing will take?
I wholeheartedly approve of sandblasting! That's totally awesome!Indeed it did make perfect sense, and that's an amazing way to do it. I love it!!! Any idea how long anodizing will take?
Take less than two week at most, a little bit longer than usual because we also wait for sandblasting :)
Guys, I dont think we'll get anymore order and to fasten up things I will close order today.Very tempted to jump in. We are at 8 orders right?
PM about invoicing coming.
I think we are at 9 currently.Guys, I dont think we'll get anymore order and to fasten up things I will close order today.Very tempted to jump in. We are at 8 orders right?
PM about invoicing coming.
Guys, I dont think we'll get anymore order and to fasten up things I will close order today.Very tempted to jump in. We are at 8 orders right?
PM about invoicing coming.
Oh wow, I missed this buy while on vacation. Excellent to see it come to fruition. I will be patiently awaiting round 2! :)Just don't go on vacation any time soon! It looks like there will be a round 2 in less than a month or so!!!
I wonder if my order in the morning got into r1 batch :o Could you confirm, bazh?
Shame I didn't see this until it was too late but good to see that round 1 is on its way.Guys, I dont think we'll get anymore order and to fasten up things I will close order today.Very tempted to jump in. We are at 8 orders right?
PM about invoicing coming.
we've reached 10 at the time I closed, there're some order from outside GH that I dont put on the list.
One just cancel his order so if you want to I can put you in, just send me a PM what you want
Shame I didn't see this until it was too late but good to see that round 1 is on its way.Guys, I dont think we'll get anymore order and to fasten up things I will close order today.Very tempted to jump in. We are at 8 orders right?
PM about invoicing coming.
we've reached 10 at the time I closed, there're some order from outside GH that I dont put on the list.
One just cancel his order so if you want to I can put you in, just send me a PM what you want
I'm still on the fence regarding what colour to get for when R2 starts. Orange/Blue or perhaps a Cyan/Pink option if it is available...
Bah! I need to figure out if I want to do something with Skidata+ (https://geekhack.org/index.php?topic=76521.0) or GMK 'Miami Nights' (https://geekhack.org/index.php?topic=71507.0) first.
Also if I can sneak this in without my girlfriend noticing. :p
Count on it :thumb:Shame I didn't see this until it was too late but good to see that round 1 is on its way.Guys, I dont think we'll get anymore order and to fasten up things I will close order today.Very tempted to jump in. We are at 8 orders right?
PM about invoicing coming.
we've reached 10 at the time I closed, there're some order from outside GH that I dont put on the list.
One just cancel his order so if you want to I can put you in, just send me a PM what you want
I'm still on the fence regarding what colour to get for when R2 starts. Orange/Blue or perhaps a Cyan/Pink option if it is available...
Bah! I need to figure out if I want to do something with Skidata+ (https://geekhack.org/index.php?topic=76521.0) or GMK 'Miami Nights' (https://geekhack.org/index.php?topic=71507.0) first.
Also if I can sneak this in without my girlfriend noticing. :p
I'll wait for your order in round 2 then 8-)
Also, guys, invoices sent out today!
Paid up, cheers dude.
Wish I got in on this now, ****.
Can't wait to see all the other colors that people gotI mean if you want to know, they are all listed in the order form
Can't wait to see all the other colors that people gotI mean if you want to know, they are all listed in the order form
I figured as much. Doesn't mean that I can't poke fun though!!!Can't wait to see all the other colors that people gotI mean if you want to know, they are all listed in the order form
I meant photos....
Why are they getting discarded? If the defects aren't terrible, I might be interested in one or two of those :)Show Image(http://i.imgur.com/Wpv3Sf0.jpg)
Discarded prototypes, more than 4lbs of carbon fibers and acrylics alone... :(
Some for each of:Cool! I'd very likely be interested on one of those plates for a universal board if you're looking to sell one :)
- Thickness tolerance (I was naive and think 1.5mm sheet will actually 1.5mm thick)
- Early designs that not 'click' (sandwich construction method, screw up to alu frame, drop in upper plate for universal cases, etc...)
- Wrong measurements (CNC using wrong files, mismatch 3d to 2d mapping lead to wrong screw holes, etc...)
Luckily, most of those are done in-house, that really speed-up the prototyping process.
We will have a garage sale in future with some really weird stuffs, but don't hold your breath :))
yeah, still working on it
we've done some universal plate for both 60 and 75 keyboard too, if the interest is enough I may run a buy for it, here's the picture of oneShow Image(https://farm1.staticflickr.com/626/20637581722_53ddeebe9e_k.jpg)
75% simple housing by bazh team - very nice. I'm using B.mini from BeastMask, which showing RGB bottom light.Show Image(http://i.imgur.com/Te2FdXB.jpg)Show Image(http://i.imgur.com/yTG3wPN.jpg)Show Image(http://i.imgur.com/I1Tajp5.jpg)
hope they will have 75% soon
75% simple housing by bazh team - very nice. I'm using B.mini from BeastMask, which showing RGB bottom light.Show Image(http://i.imgur.com/Te2FdXB.jpg)Show Image(http://i.imgur.com/yTG3wPN.jpg)Show Image(http://i.imgur.com/I1Tajp5.jpg)
hope they will have 75% soon
we've done some universal plate for both 60 and 75 keyboard too, if the interest is enough I may run a buy for it, here's the picture of oneShow Image(https://farm1.staticflickr.com/626/20637581722_53ddeebe9e_k.jpg)
If you do a buy for a custom 75% build similar to this 60% I would probably be forced to buy it.
I got your post so late :(I mean, I'll be using a GON NeRD 60 with mine. Pretty much any 60% pcb should fit just fine in this case, since it doesn't even have any mounting holes. The plate slots into the rails that go around the side, so it should be ridiculously easy to find a pcb that will work with this case.
Just one question: which kind of pcb this case would fit? Mine is 38gt from GON
Maybe someone did ask you this question but I've not find one :<
I mean, I'll be using a GON NeRD 60 with mine. Pretty much any 60% pcb should fit just fine in this case, since it doesn't even have any mounting holes. The plate slots into the rails that go around the side, so it should be ridiculously easy to find a pcb that will work with this case.thanks. got it.
Well it was in our intend from the start to support as many layout as possible but it still need some time as well as we need to check the capability of the machining to bring more of them so it will not be around soon. Tt the time I just want to run this 60% as smooth as possible so the less diversity at the moment the better for me given the fact this is the first time I run a buy so yeah, dont expect it to appear anytime soon.
Payment update: 2 more to go guys, hurry up! :P
support and paid!
Round 2 will start after Lunar New Year a week or two :)Where do I get one of those Pikachus?
An irrelevant photo to show off my 3d printed low poly pikachu :D
Build/Buy a 3d printer maybe :cool:Hmmm. The makerspace near me has several 3d printers... I can haz modelz?
I use a lulzbot mini.Oooo now I'm really extra excited!!! :)
Just kidding, will send you one along with the keyboard :)
We still have one more invoice to be paid, hurry up guy! If you pay the invoice soon we can go to anodizing before holiday break and speed up the buy for everyone! :DAny update on the invoice payment? I'm way too excited for this board to keep waiting like this!!! :)
We still have one more invoice to be paid, hurry up guy! If you pay the invoice soon we can go to anodizing before holiday break and speed up the buy for everyone! :DAny update on the invoice payment? I'm way too excited for this board to keep waiting like this!!! :)
Oooo. He might be a little busy with all of the LZ-RV stuff... Heh. I ordered one of those too... Anyway, I am excited to see pictures!We still have one more invoice to be paid, hurry up guy! If you pay the invoice soon we can go to anodizing before holiday break and speed up the buy for everyone! :DAny update on the invoice payment? I'm way too excited for this board to keep waiting like this!!! :)
I'm still waiting for Karura, his is the only invoice left.
Also, small pic update to come :D
Since you said earlier that production was already underway (if I'm not mistaken), does that mean we will be getting the boards sooner rather than later, even if it takes a while for the last payment to be made?
Since you said earlier that production was already underway (if I'm not mistaken), does that mean we will be getting the boards sooner rather than later, even if it takes a while for the last payment to be made?
Anodizing process is not done in-house so we rather do full batch at a time (it take longer if we do small number of odd pieces, lower priority). So there is 2 options: anod without his kit or keep waiting :(
PS: Imgs before send to sandblast shop, still left them there.
Those look awesome! Shoot me a pm about what colors karura chose, and what the cost of his invoice is.Since you said earlier that production was already underway (if I'm not mistaken), does that mean we will be getting the boards sooner rather than later, even if it takes a while for the last payment to be made?
Anodizing process is not done in-house so we rather do full batch at a time (it take longer if we do small number of odd pieces, lower priority). So there is 2 options: anod without his kit or keep waiting :(
PS: Imgs before send to sandblast shop, still left them there.
I want to thank KaminKevCrew for bringing it to my attention that I had to pay immediately.Glad we are a go :)
I must apologize for holding everyone up, as I have been very occupied with quite a lot of personal matters lately, and have also been doing my best to run GB things, and have missed the Paypal reminders.
Hope all is good, I have just paid, and I want to thank Bazh for designing and running this phenomenal design.
when would a round 2 happen?Round two will probably happen when round one completes, which should be soon!
So that I know hen I need to put some money aside
Edit:
Also would like to know about the coloured switchplate?
Like in the picture.
That possible?
Question, are the CF plates coated after cutting out the switch holes?I'm pretty sure that was talked about in the interest check. The plates should be made out of a dense enough weave that they won't actually splinter. (IIRC, of course.)
I do not want to get CF splinters in my hands.
Question, are the CF plates coated after cutting out the switch holes?I'm pretty sure that was talked about in the interest check. The plates should be made out of a dense enough weave that they won't actually splinter. (IIRC, of course.)
I do not want to get CF splinters in my hands.
That's very true. Carbon splinters suck.Question, are the CF plates coated after cutting out the switch holes?I'm pretty sure that was talked about in the interest check. The plates should be made out of a dense enough weave that they won't actually splinter. (IIRC, of course.)
I do not want to get CF splinters in my hands.
Right, I wasn't sure if it was, I'm just slightly concerned, because CF splinters are no joke. D:
Hmm, high speed cut using CNC router with sharp mill bit like our plate should not leaving any splinter, just some CF dust (that I cleaned off) since factory-made sheet have plenty of epoxy bond. I have no problem running my finger along edges and prying switches off the plates (will show you a video but not that I endorse this action).
But since you still have concerns, I will do CA sealing test and report around this weekend.
It's 6th day of Lunar New Year today so hopefully they will start next week, sometime they are slow to start since staff are not fully present after the holiday (go back to hometown is big tradition here_in Vietnam).Gotcha. Oh well!
Hmm that shade of blue looks more like sky blue than deep blue to me.
No worries, not as what I expected, but that blue still goes well with the orange. :thumb:Hmm that shade of blue looks more like sky blue than deep blue to me.
Somewhere in between, sorry bro.
Guess we gonna have something even lighter for 'sky blue'...
I like deep blue than sky blue. Black and sky blue is unsuitable
anything new coming with r2? such as HHKB layout, new colors, etc? please do something like a changelog so upcoming buyers can see what differences there will be.
Hope the revised anodizing is going well! Can't wait to have this in my hands, so I can build the board!!!
Issues happen! This is still easily one of the fastest group buys that I've ever been a part of! (I have three other group buys that I joined before this one, and I wont have those boards until after I have this one!Hope the revised anodizing is going well! Can't wait to have this in my hands, so I can build the board!!!
It did go well. Shipping will happen this week. Still take more than 3 months when we aim for 2 month for first batch :(
Next round please! 😆 I am thinking of changing the carbon back plate to acrylic diffuse plate already even though I missed the first round. Will definitely be in for a couple of them in the next round.You might have to get that cut specifically for this case. The plates look like they mount into channels on the aluminum frame, so I doubt that normal plates would fit.
You're right. But I assume it shouldn't be too hard to cut acrylic plate. I could be wrong... it would be nice if there is an option for acrylic diffuse plate instead of carbon. But I will buy it anyway, carbon is nice too.Next round please! 😆 I am thinking of changing the carbon back plate to acrylic diffuse plate already even though I missed the first round. Will definitely be in for a couple of them in the next round.You might have to get that cut specifically for this case. The plates look like they mount into channels on the aluminum frame, so I doubt that normal plates would fit.
Yeah. I assume that the slots are roughly 1.5mm (the recommended thickness for a metal/cf plate) so you'd have two options for acrylic. You could laser cut some 1.5mm acrylic, which would be far too soft and bendable, I think, or you could have some 5mm acrylic milled at the side down to 1.5mm acrylic. The only issue that I could see there (and this could be the same issue with the full thin plate) would be the possibility that the acrylic could break at the thin edges.You're right. But I assume it shouldn't be too hard to cut acrylic plate. I could be wrong... it would be nice if there is an option for acrylic diffuse plate instead of carbon. But I will buy it anyway, carbon is nice too.Next round please! 😆 I am thinking of changing the carbon back plate to acrylic diffuse plate already even though I missed the first round. Will definitely be in for a couple of them in the next round.You might have to get that cut specifically for this case. The plates look like they mount into channels on the aluminum frame, so I doubt that normal plates would fit.
Yeah. I assume that the slots are roughly 1.5mm (the recommended thickness for a metal/cf plate) so you'd have two options for acrylic. You could laser cut some 1.5mm acrylic, which would be far too soft and bendable, I think, or you could have some 5mm acrylic milled at the side down to 1.5mm acrylic. The only issue that I could see there (and this could be the same issue with the full thin plate) would be the possibility that the acrylic could break at the thin edges.
One other idea that I just came up with is that you could do a hybrid/half plate, where you use carbon on the edges, and acrylic in the middle. That way, the carbon could bear the brunt of the force that gets transmitted into the case, and the acrylic could be all along the middle for the looks!
Stack plate, acrylic plate with stainless steel frame around. I could do it, but what's your reason for not wanting to try out the cf plate? The springiness is awesome IMO.Acrylic plate is for board with underglow. CF is cool, I agree. I want CF too for my non-underglow keyboard. Having choice of acrylic plate is a nice add-on I guess.
Ah sorry, I though we are talking about mount plate, I agree backplate material could be adapt for underglow. We can do custom design modification needed for it ;)Yup. Next round, please~
Ready but no sign of mailman, they promise to come with hard packing boxes and stuffs at my home... last week.Good luck~😎
I'm ready to do the packaging myself and make a trip to the post office if they not come today.
Reason is harder to blame them if anything happen once I do the packaging myself.
:mad:
Ready but no sign of mailman, they promise to come with hard packing boxes and stuffs at my home... last week.Thanks for the update! :) too bad about the mailman...
I'm ready to do the packaging myself and make a trip to the post office if they not come today.
Reason is harder to blame them if anything happen once I do the packaging myself.
:mad:
any possibilities for a hhkb plate for this?
no options on the plate colour right?any possibilities for a hhkb plate for this?
Any layout, just need to PM bazh.
no options on the plate colour right?any possibilities for a hhkb plate for this?
Any layout, just need to PM bazh.
Packing, ready to go guys! :thumb:Super~ any idea about next round?Show Image(http://uploads.tapatalk-cdn.com/20160317/b474307d8125a8f46d3ab298471315c8.jpg)
*Not including orders need reanodizing
guys, any pictures/render of how would the weaven with hhkb plate will look like? my assumption is that there will be two 'holes' on each on of the bottom row, since the plate is lower than the sidewalls. don't think it will look proper.I agree. I don't think this would go well with HHK layout even with proper plate. You have to change the frame design to cover the space nicely. But that kind of beats the purpose of using modular fame parts.
It should be possible to design some aluminum blockers for a HHKB layout. No need to adjust the frame. Just screw them through the plate and perhaps the PCB.
The only thing I would be concerned about is rattling in that case.
guys, any pictures/render of how would the weaven with hhkb plate will look like? my assumption is that there will be two 'holes' on each on of the bottom row, since the plate is lower than the sidewalls. don't think it will look proper.
It should be possible to design some aluminum blockers for a HHKB layout. No need to adjust the frame. Just screw them through the plate and perhaps the PCB.
The only thing I would be concerned about is rattling in that case.
Think little rubber washers would be sufficient for stopping that?
Of course we will not selling anything that rattle, have more faith pls.
About hhkb style and winkeyless style, I will have custom bottom bar for that :) will fit with original parts of course. Power of modular design :cool:
I designed an MX 1.00 space blocker for PCB-mounting. I had a couple of samples 3D-printed. They came out fine. They would cost about $4.50 each if I made them available on Shapeways. (I also designed 1.25 and 2.00 MX and 1.0 B/S versions.)Otherwise there is always this. :P
- Ron | samwisekoi
Of course we will not selling anything that rattle, have more faith pls.Not accusing you of that. :P
About hhkb style and winkeyless style, I will have custom bottom bar for that :) will fit with original parts of course. Power of modular design :cool:
Of course we will not selling anything that rattle, have more faith pls.Not accusing you of that. :P
About hhkb style and winkeyless style, I will have custom bottom bar for that :) will fit with original parts of course. Power of modular design :cool:
What I meant is that if we keep the case like it is and design two blockers for the HHKB crowd (where you put another piece of aluminum on the plate that fits flush inside the empty space of the corner keys.
It's just susceptible to having a bit of play (and thus rattling) if it is not fixed to the case.
Of course we will not selling anything that rattle, have more faith pls.Not accusing you of that. :P
About hhkb style and winkeyless style, I will have custom bottom bar for that :) will fit with original parts of course. Power of modular design :cool:
What I meant is that if we keep the case like it is and design two blockers for the HHKB crowd (where you put another piece of aluminum on the plate that fits flush inside the empty space of the corner keys.
It's just susceptible to having a bit of play (and thus rattling) if it is not fixed to the case.
Nothing stop me from modify the plate so they locked in place :)
HHKB = custom side pair + hhkb plate
Winkeyless = custom bottom long bar + wkl plate
They all look so badass, really like the modular design.
Any word on the reanidizing ones? Really cant wait to get mine.
Shipping cost was sooooo... high. Almost faint when realize it was higher than my (missed by miles) calculation.Hope it will get better for next round 😉
Well, nothing I can do about it now :'(
Can I ask if mine was one of the cases that needed to be reanodized?
Excellent! I think that means I'm getting mine sooner XD it's been a while and I have a terribly poor memory about stuff like this!Can I ask if mine was one of the cases that needed to be reanodized?
Only for who want deeper shade of blue.
Will there be another GB for these in the near future? Really disappointed I missed out on this.Me too Keep watching on this
Will there be another GB for these in the near future? Really disappointed I missed out on this.Me too Keep watching on this
Round 2 comes in short
As soon as I got feedback from customers of first batch.That sounds so exciting. 😆 Looking forward to your new work 🙌.
The design is new from ground up so there is a chance of mistakes or quirks I overlooked that only come to light in different real use situation. If that happen, I would like to fix it for who already purchased before making a second batch.
Also, as a start up keyboard company, we do have something else (entirely different) to show in the next week, so stay tuned ;)
As soon as I got feedback from customers of first batch.
The design is new from ground up so there is a chance of mistakes or quirks I overlooked that only come to light in different real use situation. If that happen, I would like to fix it for who already purchased before making a second batch.
Also, as a start up keyboard company, we do have something else (entirely different) to show in the next week, so stay tuned ;)
Bad new first.Sorry to hear this. Kind of curious which part is damaged, coz the aluminiums and CF seem to be very solid and strong materials.
First buyer feedback (local) is the kit received with damages, despite an inch thick bubble wrap around, and it was ding-free before shipping.
Definitely not the first feedback I'm looking for, he's only 2000km away so I would just redo what needed.
So nervous about the rest of them out there :'( please leave feedback right after you got yours.
Some normal update:
Done the assembly instruction (should have been done weeks ago but I have no time), will post it tomorrow.
Aluminum can be pretty easily scratched. I wouldn't be surprised if the anodizing got a little messed up.Bad new first.Sorry to hear this. Kind of curious which part is damaged, coz the aluminiums and CF seem to be very solid and strong materials.
First buyer feedback (local) is the kit received with damages, despite an inch thick bubble wrap around, and it was ding-free before shipping.
Definitely not the first feedback I'm looking for, he's only 2000km away so I would just redo what needed.
So nervous about the rest of them out there :'( please leave feedback right after you got yours.
Some normal update:
Done the assembly instruction (should have been done weeks ago but I have no time), will post it tomorrow.
Dings, deformed edges on 6061 aluminium... I cant imagine what kind of force can go through that thick 4 layers of bubblewrap though, but it does. Second buyer from Malaysia also have one ding on the corner of side bar. The problem may widespread.Hopefully it will be fine. Still looking forward to the second round ;)
Once everyone confirmed total number of damage parts, I will make replacements
Please also report with the picture of the box condition (for reference)
Both damaged cases involve EMS and local post. I do hope kit shipped with USPS and UPS (for CAD buyer) fare better. my proxy confirmed box was okay and no sign of damage when they arrived in US.
Dings, deformed edges on 6061 aluminium... I cant imagine what kind of force can go through that thick 4 layers of bubblewrap though, but it does. Second buyer from Malaysia also have one ding on the corner of side bar. The problem may widespread.
Once everyone confirmed total number of damage parts, I will make replacements
Please also report with the picture of the box condition (for reference)
Both damaged cases involve EMS and local post. I do hope kit shipped with USPS and UPS (for CAD buyer) fare better. my proxy confirmed box was okay and no sign of damage when they arrived in US.
At least the damage isn't terrible. That still sucks though.Show Image(http://uploads.tapatalk-cdn.com/20160324/e90666c0025306f911ad7bb177970946.jpg)
Report from Malaysia, still waiting for the box condition.
:(
Yes, proxy is my friend from Houston, TX.
At least the damage isn't terrible. That still sucks though.
It looks like it just needs to be re anodized at most?
Well, I for one, appreciate the wonderful customer service that you're exhibiting here. That's totally awesome.At least the damage isn't terrible. That still sucks though.
It looks like it just needs to be re anodized at most?
I think replacement needed.
Dings, deformed edges on 6061 aluminium... I cant imagine what kind of force can go through that thick 4 layers of bubblewrap though, but it does. Second buyer from Malaysia also have one ding on the corner of side bar. The problem may widespread.
Once everyone confirmed total number of damage parts, I will make replacements
Please also report with the picture of the box condition (for reference)
Both damaged cases involve EMS and local post. I do hope kit shipped with USPS and UPS (for CAD buyer) fare better. my proxy confirmed box was okay and no sign of damage when they arrived in US.
Hey foggyflute,
Just wondering what the shipment via UPS for Canadians was declared at, and did it happen to come from Texas? Got a random notification from UPS this morning.
I figured out the way to fix the issue with the damaged cases! If we never open the packages, the cases are neither damaged, nor undamaged!Erwin Schrödinger's Cat ^_^;
Glad someone got it :)I figured out the way to fix the issue with the damaged cases! If we never open the packages, the cases are neither damaged, nor undamaged!Erwin Schrödinger's Cat ^_^;
You guys are covered so nothing to worry about, just sucks to continue waiting for replacement parts.Yeah, I hope there are as few issues as possible (read: none) once they get to the us... I don't want to wait for replacement parts, although I definitely appreciate how much effort you are putting in to make everything perfect. That's totally awesome!!!
The box condition was alright. 4 layers of bubble wrap is definitely not enough when comes to packaging the aluminum boards.Show Image(http://uploads.tapatalk-cdn.com/20160324/e90666c0025306f911ad7bb177970946.jpg)
Report from Malaysia, still waiting for the box condition.
:(
Yes, proxy is my friend from Houston, TX.
Alright! I just got my case!How's the baby? ;)
Pretty good. I have a couple of niggles that I'm about to send to Bazh and Foggy.Alright! I just got my case!How's the baby? ;)
Round 2 comes in short :PAwesome!
PMed,Can confirm. Plate wiggle absolutely non-existant once you build a board in this case.
Wiggle plate before assembly are normal, anti-slip mat will take care of it.
Damaged parts will be replaced.
Sorry to see it arrived like that.
Once everyone reported back, we will immediately start replacement production.does the replacement production affect the time of round 2?
Also worrking on more secure packaging materials.
Once everyone reported back, we will immediately start replacement production.does the replacement production affect the time of round 2?
Also worrking on more secure packaging materials.
Will there be any design change for round 2?Once everyone reported back, we will immediately start replacement production.does the replacement production affect the time of round 2?
Also worrking on more secure packaging materials.
Yes it does, it will delay the start of round 4 about 2weeks.
We still aim for April groupbuy second round, with faster turnaround too.
Will there be any design change for round 2?
Will there be any design change for round 2?
There will be some minor change in round 2:
-1.8mm track (currently 1.6mm) so no edge sanding on carbon plate (we currently do it on all plate because carbon thickness is not something very precise).
-Larger plate dimension - no wiggle before assembly (the current dimension is not really a problem, it's our design intention, but still lead to misleading about our accuracy)
-Stronger sandblast setting - the surface texture will stronger, no faint sign of toolpath like first batch.
-Colorchip for easy choosing anodize colors, new color also available with small extra cost.
-Improved packaging for parts safety.
-May have proxy of your choice and transparent shipping cost (not flat rate for everyone everywhere like right now, sorry).
Some feature we are working on to bring it up to be great modular system (may not available for round 2, not confirmed):
-Winkeyless bottom bar, and maybe HHKB side pair + plate set.
-Plexiglass window on bottom for ambient LED pcbs.
-Other type of stands (more angles, horizontal bar addon for who like put it on lap, etc...
Will there be any design change for round 2?
There will be some minor change in round 2:
-1.8mm track (currently 1.6mm) so no edge sanding on carbon plate (we currently do it on all plate because carbon thickness is not something very precise).
-Larger plate dimension - no wiggle before assembly (the current dimension is not really a problem, it's our design intention, but still lead to misleading about our accuracy)
-Stronger sandblast setting - the surface texture will stronger, no faint sign of toolpath like first batch.
-Colorchip for easy choosing anodize colors, new color also available with small extra cost.
-Improved packaging for parts safety.
-May have proxy of your choice and transparent shipping cost (not flat rate for everyone everywhere like right now, sorry).
Some feature we are working on to bring it up to be great modular system (may not available for round 2, not confirmed):
-Winkeyless bottom bar, and maybe HHKB side pair + plate set.
-Plexiglass window on bottom for ambient LED pcbs.
-Other type of stands (more angles, horizontal bar addon for who like put it on lap, etc...
Will there be any design change for round 2?
There will be some minor change in round 2:
-1.8mm track (currently 1.6mm) so no edge sanding on carbon plate (we currently do it on all plate because carbon thickness is not something very precise).
-Larger plate dimension - no wiggle before assembly (the current dimension is not really a problem, it's our design intention, but still lead to misleading about our accuracy)
-Stronger sandblast setting - the surface texture will stronger, no faint sign of toolpath like first batch.
-Colorchip for easy choosing anodize colors, new color also available with small extra cost.
-Improved packaging for parts safety.
-May have proxy of your choice and transparent shipping cost (not flat rate for everyone everywhere like right now, sorry).
Some feature we are working on to bring it up to be great modular system (may not available for round 2, not confirmed):
-Winkeyless bottom bar, and maybe HHKB side pair + plate set.
-Plexiglass window on bottom for ambient LED pcbs.
-Other type of stands (more angles, horizontal bar addon for who like put it on lap, etc...
Any chance those of us who already have one could get individual parts? (I would love a wkl/hhkb bottom bar) would also be down for a plexiglass bottom, since I do have a bunch of smd leds for the bottom of my pcb!
Awesome! You guys are really trying to make this perfect! So excited to know that. Can't waitWill there be any design change for round 2?
There will be some minor change in round 2:
-1.8mm track (currently 1.6mm) so no edge sanding on carbon plate (we currently do it on all plate because carbon thickness is not something very precise).
-Larger plate dimension - no wiggle before assembly (the current dimension is not really a problem, it's our design intention, but still lead to misleading about our accuracy)
-Stronger sandblast setting - the surface texture will stronger, no faint sign of toolpath like first batch.
-Colorchip for easy choosing anodize colors, new color also available with small extra cost.
-Improved packaging for parts safety.
-May have proxy of your choice and transparent shipping cost (not flat rate for everyone everywhere like right now, sorry).
Some feature we are working on to bring it up to be great modular system (may not available for round 2, not confirmed):
-Winkeyless bottom bar, and maybe HHKB side pair + plate set.
-Plexiglass window on bottom for ambient LED pcbs.
-Other type of stands (more angles, horizontal bar addon for who like put it on lap, etc...
Yup, they did not able to find better placing for anodizing hook, the design of the stand was not leave any better position for clamping them. We would add holes or something next time.
The blemish on black side was slipped under my check, maybe lighting in the room, next time will check them under direct day light. This is bad enough for getting replacement part if you want to. Overall, we changing anodizing provider (better sandblast to hide machine marks, better color choices) so it will get better.
Sorry about the tax, did not know the 'brokage' was that bad, so usps should be the better choice?
This is the first production run from us so we will get better. We really appreciate you guys for being early-adopters for unknown vendor at remote place like this. Don't hesitate shoot a PM if any thing was not as good as expect, we will find a way to deal with all the problems.
How the hell did I miss that GB? :mad:
Any update? When will be the next round?
any info on possibility of a metal plate? like in the pics of the main post?
any info on possibility of a metal plate? like in the pics of the main post?
well the whole point of the case is the CF plate which delivers the different feels to metal plate, why not try them :D
If you still want a metal plate sure no problem getting one :D
when will the infos for R2 be up sir? still no wkl/hhkb layout huh?
when will the infos for R2 be up sir? still no wkl/hhkb layout huh?
We're already have blueprint for wkl but not tested it for real typing yet, hhkb still in work, need solution so the number of difference parts are minimum, also aesthetic.
Initial plan is waiting for report of damaged parts of round 1, shipping replacements and running round 2. Still not having feedback of 2 out of 9, hindered our planning.
Even if we don't have the feedback, ten pair of sidebars for replacement are already in production, shock-absorb foam and box are in the work. We have one week delay of everything due to Hùng Kings' Festival.
Regardless other matter, round 2 will start around the end of April, maybe along with our second project Lustro (which is limited released local in the next few days).
Show Image(http://i.imgur.com/x5KWnwh.jpg)
Working on foam packaging, take so much time :(
+1 for polyethylene foam. It's some of the best stuff around for shipping anything that you're worried about in shipping.Show Image(http://i.imgur.com/x5KWnwh.jpg)
Working on foam packaging, take so much time :(
If you're looking for a foam liner to absorb bumps, I'd recommend Polyethylene Foam. Looks like this.Show Image(http://www.foambymail.com/Merchant2/graphics/00000001/polyethylene.jpg)
Is it supposed to be the First Batch or the Fist Batch? Referring to the title.
Is the timeline for the 2nd round still the end of April?
Holy **** how did I miss this
Of course you did not, round 2 open today, I'm updating OP :*
**** :(Of course you did not, round 2 open today, I'm updating OP :*
The order form link you posted is the link to edit the form (i.e. Change questions, close the form, etc.). It looks like the order form has been unintentionally edited because of that + anyone who clicks the link can see the information of people who have submitted responses.
So is green ever going to be a possibility?If any color reach 5 orders and it will come true :3
I really would like to get one of these boards but green is my top priority.
Man if you did a "HHKB" version like the windows version, where you basically block the left and right control, but otherwise the 1.5/1/1.5/7/1.5/1/1.5 layout, I'm not sure I'd be able to resist.
A few other things, there seems to be a broken image towards the end of the post, and the FAQ talks about the plate being universal, but it seems round 2 is now either ANSI or ISO.
So is green ever going to be a possibility?
I really would like to get one of these boards but green is my top priority.
Man if you did a "HHKB" version like the windows version, where you basically block the left and right control, but otherwise the 1.5/1/1.5/7/1.5/1/1.5 layout, I'm not sure I'd be able to resist.
A few other things, there seems to be a broken image towards the end of the post, and the FAQ talks about the plate being universal, but it seems round 2 is now either ANSI or ISO.
apart from the separate ANSI/ISO version, the plate is still universal as they both still cover the split backspace, stepped capslock, 6/6.25/7x spacebar layout, split right shift (right Fn), the only different is the enter and left shift so that would be no problem :thumb:
Curious. Is the "legs" required to assemble the case? I prefer flat cases over angled.
Oh, come on guys. I just check the order status sheet. How come you all are stick with the default color options... don't you see the line on the form "be creative" for the colors? Let's together make special colors, deal?
For non-default color options, do the 5 people have to be for the same part? I see another person chose Dark Blue as well, but for the Sidebars while I want Dark Blue Long Bars.I want dark blue and orange, so there's one more. ;)
(Also, subtle post trying to get Dark Blue to 5 people.)
I can't get the picture of the winkeyless to show on my phone :(
Now I see it. Thanks : )I can't get the picture of the winkeyless to show on my phone :(
rehosted :thumb:
anyone in for a pink/purple set? can't wait to try it on the JTK sophomore..
Will grey be a color that doesn't require a MOQ?
Glad to see that Round 2 is launched!
Questions:
1. Am I able to get the combination in the OP (black + dark grey, or say Dolch) this time?
2. What is the estimate shipping date? I'm now in China, but later this August, I'm going back to U.S. So the shipping date matters.
Thanks! :thumb:
I apologize if this has been answered before. If our color choices do not get the requisite 5 orders, will we be notified to change the colors? Is there any option to pay extra to make the custom colors happen regardless (depending on the price of course ;) )?
Glad to see Round 2 open up for this! :D :thumb:
One of my friends said that this case, without the carbon fiber, would literally be just a picture frame. And I agree with him. Neat design and well built (I can actually appreciate it cause I do engineering and understand the work that goes into this ****), but not for me.
One of my friends said that this case, without the carbon fiber, would literally be just a picture frame.
Update on color status guys :P
Just put in my order. :thumb:
Just had some questions about the blue color. What color were the round 1 models and how loght is sky blue?
Hey Bazh,
Will you ship the 2 gb together or separately ? ;)
well the color appears to me look very much like a darker shade of cyan, no tone different, perharps we can compromise on that with 'Cyan' people ? A medium shade between the 2 is kind of work for me.Dark cyan works for me I guess. You can group us together, but the final color can be still open for discussion later. We have other teal people on the list. Wonder how their thoughts on this are~
Please count me in for one.
My VPN is down now, I couldn't open google doc. Will fill up the form later.
Would it be possible to order some of the stands? I bought a board off someone and I'd like an option for the legs.
Please count me in for one.
My VPN is down now, I couldn't open google doc. Will fill up the form later.
Please send me an PM about what you like and I'll put it in the form for you :thumb:
SentPlease count me in for one.
My VPN is down now, I couldn't open google doc. Will fill up the form later.
Please send me an PM about what you like and I'll put it in the form for you :thumb:Would it be possible to order some of the stands? I bought a board off someone and I'd like an option for the legs.
Definitely, please PM me what you want. :thumb:
Any chance of a round 3? I'm really hoping for green but it doesn't look like anyone selected it.
Any chance of a round 3? I'm really hoping for green but it doesn't look like anyone selected it.
Hi Bazh. Can you wait till my payday on June 10th so I can pay your invoice?
Hi guys, sorry for miscommunicate the last couple of days, my laptop's broken so things getting slow down a bit.
About invoicing progress: so far all of people who order winkeyless Weaven are the only to receive invoice. Next in plan is the rest of the Weaven and the Lustro order that does not come with assembling parts, people with assembling parts will be last since I have to calculate the total cost for parts too, sorry for that I hope you understand :(
Hope we can get the invoicing and payment done in next week ;)
Sent from my iPhone using Tapatalk
Could you add me to the order list? Also, good news, my VPN is working now :DI added you already you can check from the sheet :P
Don't see me on the list, should I worry? Just want to double-check my order tho. :pYou're on our private list :P
I declined the invoice because apparently my order change didn't go through. Please send me a new invoice for all black parts, no extras, ISO plate.Noted! I'll send you new invoice in minutes :thumb:
All Weaven invoices sent out today. :)
I didn't get one
Sorry missed you, invoice sent :thumb:All Weaven invoices sent out today. :)
I didn't get one
Hi bazh, paid invoice!Gotcha! :thumb:
Have smt for you guys :3
(Attachment Link)
That's the blue color from round 1 :PHave smt for you guys :3
(Attachment Link)
Oh pretty. Is that cyan or blue on your long bars?
Have smt for you guys :3
(Attachment Link)
Those who have already built a Weaven, what PCB did you use? Those planning a build in the future what PCB do you want to use?
Those who have already built a Weaven, what PCB did you use? Those planning a build in the future what PCB do you want to use?
Planning on using a WKL b.face. For that reason I'm really hoping the an acrylic back diffuser is possible
;) ;) Bazh
Those who have already built a Weaven, what PCB did you use? Those planning a build in the future what PCB do you want to use?
Planning on using a WKL b.face. For that reason I'm really hoping the an acrylic back diffuser is possible
;) ;) Bazh
Those who have already built a Weaven, what PCB did you use? Those planning a build in the future what PCB do you want to use?
Planning on using a WKL b.face. For that reason I'm really hoping the an acrylic back diffuser is possible
;) ;) Bazh
How does it compare to a FaceW, and where can it be purchased?
Those who have already built a Weaven, what PCB did you use? Those planning a build in the future what PCB do you want to use?
Planning on using a WKL b.face. For that reason I'm really hoping the an acrylic back diffuser is possible
;) ;) Bazh
How does it compare to a FaceW, and where can it be purchased?
Those who have already built a Weaven, what PCB did you use? Those planning a build in the future what PCB do you want to use?
Planning on using a WKL b.face. For that reason I'm really hoping the an acrylic back diffuser is possible
;) ;) Bazh
If you don't mind me asking, why did you choose the Weaven over the Lustro if you wanted an acrylic back?
I was originally going to go with a Lustro, but decided underside lighting just wasn't important to me and switched over the this instead - as such, I am planning on using a GH60 for my build.
Those who have already built a Weaven, what PCB did you use? Those planning a build in the future what PCB do you want to use?
Planning on using a WKL b.face. For that reason I'm really hoping the an acrylic back diffuser is possible
;) ;) Bazh
If you don't mind me asking, why did you choose the Weaven over the Lustro if you wanted an acrylic back?
I was originally going to go with a Lustro, but decided underside lighting just wasn't important to me and switched over the this instead - as such, I am planning on using a GH60 for my build.
I greatly prefer the look of the weaven and I wasn't planning on using the underglow. But if it's possible, and I know it's a long shot, adding a diffuser to the weaven would be icing on the cake.
I will need to test the 1.5mm acrylic to see if it sturdy enough first, it really easy to crack and we also have to press the pcb down to the back plate with the anti-slip mat in between, that's how it was designed. Maybe an acrylic plate under skeletonized carbon/steel frame or cut out for led diffuse. I will working on that.
Those who have already built a Weaven, what PCB did you use? Those planning a build in the future what PCB do you want to use?
Planning on using a WKL b.face. For that reason I'm really hoping the an acrylic back diffuser is possible
;) ;) Bazh
If you don't mind me asking, why did you choose the Weaven over the Lustro if you wanted an acrylic back?
I was originally going to go with a Lustro, but decided underside lighting just wasn't important to me and switched over the this instead - as such, I am planning on using a GH60 for my build.
I greatly prefer the look of the weaven and I wasn't planning on using the underglow. But if it's possible, and I know it's a long shot, adding a diffuser to the weaven would be icing on the cake.
Fair enough. I was just wondering because I saw it mentioned in the Lustro thread as well - for what it's worth, FoggyFlute (design/engineering for these projects) had this to say about acrylic and Weaven:QuoteI will need to test the 1.5mm acrylic to see if it sturdy enough first, it really easy to crack and we also have to press the pcb down to the back plate with the anti-slip mat in between, that's how it was designed. Maybe an acrylic plate under skeletonized carbon/steel frame or cut out for led diffuse. I will working on that.
Replacement for round 1 is done, most likely will be ship before round 2 order get done, these are still our first priority right now. This is not affecting the schedule for round 2 (and Lustro) though.
Replacement for round 1 is done, most likely will be ship before round 2 order get done, these are still our first priority right now. This is not affecting the schedule for round 2 (and Lustro) though.
I already ordered for replacement parts and according to bazh my order was supposed to be shipped after round 2 order was done, but it's almost the end of June and I haven't seen anything yet. Just wondering if something is wrong.
Any chance of an R3? :v These look incredible.Not until we finish this round first :p
Any chance of an R3? :v These look incredible.Not until we finish this round first :p
And find some interest layout to expand the compatibity :p
Minor update: we're wrapping up the CNC process, expecting all Weaven getting done in the next couple of days.
Due to some people backing out of the group buy, if anyone wants to sneak in now is the time, PM me and I can add your order in to this round before we go anodizing ;)
Minor update: we're wrapping up the CNC process, expecting all Weaven getting done in the next couple of days.aww yisss
Due to some people backing out of the group buy, if anyone wants to sneak in now is the time, PM me and I can add your order in to this round before we go anodizing ;)
Hey Bazh. Would it ever be possible to have a version of the plate made for Alps switches? Do you see that ever being in the works? :)
EDIT: After searching the thread, I see that this question has been asked already several times. My bad! :-X
Hey Bazh. Would it ever be possible to have a version of the plate made for Alps switches? Do you see that ever being in the works? :)
EDIT: After searching the thread, I see that this question has been asked already several times. My bad! :-X
Well unless I read it wrong that's still not confirmed. It was "in the works" for round 2, but I'm not sure if it was ever an option or not on the order form since no one has talked about it since then. At least that I'm aware of.
Hey Bazh. Would it ever be possible to have a version of the plate made for Alps switches? Do you see that ever being in the works? :)
EDIT: After searching the thread, I see that this question has been asked already several times. My bad! :-X
Is an Alps plate option available? I know there was talk of this in the past. Also, I'm guessing this will work with Hasu's Alps 64 pcb if the alps plate is an option, right?
Hey Bazh. Would it ever be possible to have a version of the plate made for Alps switches? Do you see that ever being in the works? :)
EDIT: After searching the thread, I see that this question has been asked already several times. My bad! :-X
Well unless I read it wrong that's still not confirmed. It was "in the works" for round 2, but I'm not sure if it was ever an option or not on the order form since no one has talked about it since then. At least that I'm aware of.Hey Bazh. Would it ever be possible to have a version of the plate made for Alps switches? Do you see that ever being in the works? :)
EDIT: After searching the thread, I see that this question has been asked already several times. My bad! :-XIs an Alps plate option available? I know there was talk of this in the past. Also, I'm guessing this will work with Hasu's Alps 64 pcb if the alps plate is an option, right?
Proof that we working on it...Show Image(http://i.imgur.com/gblWdja.jpg)
We're not ignore anyone needs, but man's power is limited so I cant not work on everything at the same time, and there's so many thing I want to do :p
looks super pretty though - glad i joined in last minute.
Any update on the orders? I don't see my name on OP ;D :thumb:
Any update on the orders? I don't see my name on OP ;D :thumb:
You're on the list, don't worry :thumb:
Any update on the orders? I don't see my name on OP ;D :thumb:
You're on the list, don't worry :thumb:
Does that mean I'm actually on the list now, too? :P
hey bazh, can we expect to see weaven within august? (after shipping and all)
otherwise i'll have to change my shipping address since i'll be moving into an apartment
I'm excited to be able to get in on the kit. :) keep up the good work!
Sent from my iPhone
Nice! What colors?
That's sounds pretty hot! :) Got a keyset to match it or just a fan of the contrasting colors?Nice! What colors?
I'm a fan of the blue and orange combination :)
Sent from my iPhone
That's sounds pretty hot! :) Got a keyset to match it or just a fan of the contrasting colors?
I got orange sides and gunmetal top/bottom, ready for either GMK Carbon or my SA Carbon ;D
Beautiful and Creativ! I love your works!Show Image(http://i.imgur.com/sty7OVw.jpg)
wkl in da house, tested and working.
Due to slide-around plates design, you gonna have bad time adjust the position of the plate before tightening the frame, if you are really anal(-retentive) and want the wkl block stay perfectly center between two 1.5x keys.
We're a little behind schedule on this since it take me 3 prototypes to get everything right.
We're still waiting on it, it's already longer than our expect but just for sure I don't want to put any rush on them really because that may cause the production to get flawed somewhere with the good 'old "because you want it fast" blame so let them have their comfort run would be best I think.
I still pay them a visit every now and then though, the whole process is still on the roll. :D
The excitement is building for me! We still looking at an end of the month ship date?
We need at least a week for sorting, confirmation and a few more days forcorrecting mistake (wrong color or failed QC parts). Another week to get them in packaging, shipping.
Yeah I'm gonna admit that we're kinda late for original schedule now than expected :( My intent is to do this as a 2-month long groupbuy has failed :( We're sorry. Now the aim is in September, as early as possible.It is a Lustro not Weaven. What about Weaven?
That's said, here's some early pieces I took from the facility.
Sky blue and CyanShow Image(https://scontent-hkg3-1.xx.fbcdn.net/v/t34.0-12/14012260_1297462850266520_1735340951_n.jpg?oh=a3a5cb3814ff7d4f1223aaa740750a18&oe=57BC0243)Show Image(https://scontent-hkg3-1.xx.fbcdn.net/v/t34.0-12/14018079_1297462823599856_2102007749_n.jpg?oh=1b33b2cc07f0ad093c9dd00d2201008d&oe=57BC0C37)
Deep Blue, Sky Blue, and CyanShow Image(https://scontent-hkg3-1.xx.fbcdn.net/v/t34.0-12/14031159_1297469120265893_92184400_n.jpg?oh=e3105dd01bdc8b45c5c898aa3d369763&oe=57BBF109)
Pink and PurpleShow Image(https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-xaf1/v/t34.0-12/14017709_1297471253599013_8554469_n.jpg?oh=7e4bb1dd25b97dfa3e7fb919fb40cf67&oe=57BC12A3&__gda__=1471952424_9ce2f6e88c20f0061992c66af984c5b3)
Grey and BlackShow Image(https://scontent-hkg3-1.xx.fbcdn.net/v/t34.0-12/14081027_1297471483598990_1772046646_n.jpg?oh=6316e8a2a524803c209983312913123e&oe=57BAE96F)
They're going in process at the same time :D no differences between the 2 buys.Yeah I'm gonna admit that we're kinda late for original schedule now than expected :( My intent is to do this as a 2-month long groupbuy has failed :( We're sorry. Now the aim is in September, as early as possible.It is a Lustro not Weaven. What about Weaven?
That's said, here's some early pieces I took from the facility.
Sky blue and CyanShow Image(https://scontent-hkg3-1.xx.fbcdn.net/v/t34.0-12/14012260_1297462850266520_1735340951_n.jpg?oh=a3a5cb3814ff7d4f1223aaa740750a18&oe=57BC0243)Show Image(https://scontent-hkg3-1.xx.fbcdn.net/v/t34.0-12/14018079_1297462823599856_2102007749_n.jpg?oh=1b33b2cc07f0ad093c9dd00d2201008d&oe=57BC0C37)
Deep Blue, Sky Blue, and CyanShow Image(https://scontent-hkg3-1.xx.fbcdn.net/v/t34.0-12/14031159_1297469120265893_92184400_n.jpg?oh=e3105dd01bdc8b45c5c898aa3d369763&oe=57BBF109)
Pink and PurpleShow Image(https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-xaf1/v/t34.0-12/14017709_1297471253599013_8554469_n.jpg?oh=7e4bb1dd25b97dfa3e7fb919fb40cf67&oe=57BC12A3&__gda__=1471952424_9ce2f6e88c20f0061992c66af984c5b3)
Grey and BlackShow Image(https://scontent-hkg3-1.xx.fbcdn.net/v/t34.0-12/14081027_1297471483598990_1772046646_n.jpg?oh=6316e8a2a524803c209983312913123e&oe=57BAE96F)
Take a photo of Weaven, Pls.They're going in process at the same time :D no differences between the 2 buys.Yeah I'm gonna admit that we're kinda late for original schedule now than expected :( My intent is to do this as a 2-month long groupbuy has failed :( We're sorry. Now the aim is in September, as early as possible.It is a Lustro not Weaven. What about Weaven?
That's said, here's some early pieces I took from the facility.
Sky blue and CyanShow Image(https://scontent-hkg3-1.xx.fbcdn.net/v/t34.0-12/14012260_1297462850266520_1735340951_n.jpg?oh=a3a5cb3814ff7d4f1223aaa740750a18&oe=57BC0243)Show Image(https://scontent-hkg3-1.xx.fbcdn.net/v/t34.0-12/14018079_1297462823599856_2102007749_n.jpg?oh=1b33b2cc07f0ad093c9dd00d2201008d&oe=57BC0C37)
Deep Blue, Sky Blue, and CyanShow Image(https://scontent-hkg3-1.xx.fbcdn.net/v/t34.0-12/14031159_1297469120265893_92184400_n.jpg?oh=e3105dd01bdc8b45c5c898aa3d369763&oe=57BBF109)
Pink and PurpleShow Image(https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-xaf1/v/t34.0-12/14017709_1297471253599013_8554469_n.jpg?oh=7e4bb1dd25b97dfa3e7fb919fb40cf67&oe=57BC12A3&__gda__=1471952424_9ce2f6e88c20f0061992c66af984c5b3)
Grey and BlackShow Image(https://scontent-hkg3-1.xx.fbcdn.net/v/t34.0-12/14081027_1297471483598990_1772046646_n.jpg?oh=6316e8a2a524803c209983312913123e&oe=57BAE96F)
Take a photo of Weaven, Pls.They're going in process at the same time :D no differences between the 2 buys.Yeah I'm gonna admit that we're kinda late for original schedule now than expected :( My intent is to do this as a 2-month long groupbuy has failed :( We're sorry. Now the aim is in September, as early as possible.It is a Lustro not Weaven. What about Weaven?
That's said, here's some early pieces I took from the facility.
Sky blue and CyanShow Image(https://scontent-hkg3-1.xx.fbcdn.net/v/t34.0-12/14012260_1297462850266520_1735340951_n.jpg?oh=a3a5cb3814ff7d4f1223aaa740750a18&oe=57BC0243)Show Image(https://scontent-hkg3-1.xx.fbcdn.net/v/t34.0-12/14018079_1297462823599856_2102007749_n.jpg?oh=1b33b2cc07f0ad093c9dd00d2201008d&oe=57BC0C37)
Deep Blue, Sky Blue, and CyanShow Image(https://scontent-hkg3-1.xx.fbcdn.net/v/t34.0-12/14031159_1297469120265893_92184400_n.jpg?oh=e3105dd01bdc8b45c5c898aa3d369763&oe=57BBF109)
Pink and PurpleShow Image(https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-xaf1/v/t34.0-12/14017709_1297471253599013_8554469_n.jpg?oh=7e4bb1dd25b97dfa3e7fb919fb40cf67&oe=57BC12A3&__gda__=1471952424_9ce2f6e88c20f0061992c66af984c5b3)
Grey and BlackShow Image(https://scontent-hkg3-1.xx.fbcdn.net/v/t34.0-12/14081027_1297471483598990_1772046646_n.jpg?oh=6316e8a2a524803c209983312913123e&oe=57BAE96F)
Still hoping for green someday.
Speaking of which, the anodizing definitely improves compared to the first Weaven GB, I was very excited when I got these on hands too.Still hoping for green someday.
Damm this facility they have a very nice green but too bad we didn't get enough number for it. I will force the green in for next project maybe. :))
X-post from Lustro thread.This makes me want a rainbow anodized case...
Bad news: there's only 1 update.
Good news: update is awesome!
Anodizing all done :PShow Image(http://uploads.tapatalk-cdn.com/20160826/eabd5dae104475604b6ab1b99e39c85f.jpg)
Now we're sorting things up and will be ready to ship in another week. :P
Also I will comeback to Finland on Monday, I will try to bring along the cases for Europe orders if everything (boxes) comes in time, so most likely the Europeans will get them first. Sorry the rest of you guys haha.
X-post from Lustro thread.Why you didnot post images of Weaven? How about weaven?
Bad news: there's only 1 update.
Good news: update is awesome!
Anodizing all done :PShow Image(http://uploads.tapatalk-cdn.com/20160826/eabd5dae104475604b6ab1b99e39c85f.jpg)
Now we're sorting things up and will be ready to ship in another week. :P
Also I will comeback to Finland on Monday, I will try to bring along the cases for Europe orders if everything (boxes) comes in time, so most likely the Europeans will get them first. Sorry the rest of you guys haha.
X-post from Lustro thread.Why you didnot post images of Weaven? How about weaven?
Bad news: there's only 1 update.
Good news: update is awesome!
Anodizing all done :PShow Image(http://uploads.tapatalk-cdn.com/20160826/eabd5dae104475604b6ab1b99e39c85f.jpg)
Now we're sorting things up and will be ready to ship in another week. :P
Also I will comeback to Finland on Monday, I will try to bring along the cases for Europe orders if everything (boxes) comes in time, so most likely the Europeans will get them first. Sorry the rest of you guys haha.
Because sorting havent got to the Weaven yet no?X-post from Lustro thread.Why you didnot post images of Weaven? How about weaven?
Bad news: there's only 1 update.
Good news: update is awesome!
Anodizing all done :PShow Image(http://uploads.tapatalk-cdn.com/20160826/eabd5dae104475604b6ab1b99e39c85f.jpg)
Now we're sorting things up and will be ready to ship in another week. :P
Also I will comeback to Finland on Monday, I will try to bring along the cases for Europe orders if everything (boxes) comes in time, so most likely the Europeans will get them first. Sorry the rest of you guys haha.
Why you didnot post images of Weaven? How about weaven?
X-post from Lustro thread.Dang, now I know which colors to get in the next round. <3
Bad news: there's only 1 update.
Good news: update is awesome!
Anodizing all done :PShow Image(http://uploads.tapatalk-cdn.com/20160826/eabd5dae104475604b6ab1b99e39c85f.jpg)
Now we're sorting things up and will be ready to ship in another week. :P
Also I will comeback to Finland on Monday, I will try to bring along the cases for Europe orders if everything (boxes) comes in time, so most likely the Europeans will get them first. Sorry the rest of you guys haha.
Why you didnot post images of Weaven? How about weaven?Show Image(http://i.imgur.com/h5TY0La.jpg)Show Image(http://i.imgur.com/ZFgIhxN.jpg)
Did not screw them in yet, but is this okay now?
This's my color, my weaven. Very excited :)
In another note, this is the final packaging, hard art paper with rubber foam padding:Show Image(http://i.imgur.com/HGFquCN.jpg)
In case there is around 3 and I win a small lottery...
I am just curious, how do you know what PCBs fit in there? Do all 60% pcbs fit in there? And what about the keys lining up?
Also, OMG that black and white and blue one with the orange spacebar blows my mind.
In case there is around 3 and I win a small lottery...
I am just curious, how do you know what PCBs fit in there? Do all 60% pcbs fit in there? And what about the keys lining up?
Also, OMG that black and white and blue one with the orange spacebar blows my mind.
The weaven is pretty spacious and will able to take any 60% pcb in the market.
Tested: poker 2, poker x, gh60, phantom, b.face, 3 different b.face clones with led-top switch position.
Poker x and one b.face clone have resistor at one of the six screw post of Lustro. The other seem fine. Since weaven did not have any post, no problem at all.In case there is around 3 and I win a small lottery...
I am just curious, how do you know what PCBs fit in there? Do all 60% pcbs fit in there? And what about the keys lining up?
Also, OMG that black and white and blue one with the orange spacebar blows my mind.
The weaven is pretty spacious and will able to take any 60% pcb in the market.
Tested: poker 2, poker x, gh60, phantom, b.face, 3 different b.face clones with led-top switch position.
Is that true for Lustro as well?
think I see mine too haha - black short sides orange long sides
mine is for carbon too! interested to see how the black compares to gunmetal for it haha, I was torn between the two but ended up going for the harder contrast
Weaven is shipped? Party time!
Sent from my LG-H830 using Tapatalk
Weaven is shipped? Party time!
Sent from my LG-H830 using Tapatalk
I could be mistaken, but I don't think he meant that Weaven has shipped, but rather that he is done sorting and boxing them and has the Lustro left to do before shipping. I believe he is shipping them both at the same time (at least to Zeal for NA). That said, I would love to be wrong and find out he has already sent out the Weaven.
Weaven is shipped? Party time!
Sent from my LG-H830 using Tapatalk
I could be mistaken, but I don't think he meant that Weaven has shipped, but rather that he is done sorting and boxing them and has the Lustro left to do before shipping. I believe he is shipping them both at the same time (at least to Zeal for NA). That said, I would love to be wrong and find out he has already sent out the Weaven.
Im sorry that you are right. Will ship them at the same time to cut the shipping cost. Few more day if I can keep the pace. Will have more man power from next groupbuy. I was not expect sorting and box them cost that much labor.
Any update on shipping yet, friends?
Thanks for the update. I think the Lustro thread wants updates too!
Sent from my iPhone using Tapatalk
Recently started looking for a high quality 60% case. Are you guys thinking of a round 3?
If I can get a Lustro, I might be selling my Weaven :)
Sent from my iPhone using Tapatalk
If I can get a Lustro, I might be selling my Weaven :)
Sent from my iPhone using Tapatalk
What color is your Weaven?
If I can get a Lustro, I might be selling my Weaven :)
Sent from my iPhone using Tapatalk
What color is your Weaven?
Blue/Orange.
Sent from my iPhone using Tapatalk
Weren't these supposed to ship out mid-to-late Sept? :confused:
Weren't these supposed to ship out mid-to-late Sept? :confused:
Weren't these supposed to ship out mid-to-late Sept? :confused:
We're sr for the late shipping, but the estimate shipping date would be next week.
Would i be able to slide a pok3r in the housing?No.
Would i be able to slide a pok3r in the housing?No.
(https://c3.staticflickr.com/6/5458/30244919250_1f52e4c0f7_c.jpg) (https://flic.kr/p/N5D7M1)
Which kc should I use :((http://www.leslieinspired.com/wp-content/uploads/2014/01/2014-spring-accent-colors.jpg)
Show Image(https://c3.staticflickr.com/6/5458/30244919250_1f52e4c0f7_c.jpg) (https://flic.kr/p/N5D7M1)
(https://c4.staticflickr.com/9/8680/29909898963_0eb4e560cf_c.jpg) (https://flic.kr/p/Mz33Va)
Which kc should I use :(
Gorgeous.What colors did you get?
I hope Lustro ships soon also. Can't wait to see that in person.
Gorgeous.What colors did you get?
I hope Lustro ships soon also. Can't wait to see that in person.
One more:
(http://i.imgur.com/50RMP4yh.jpg) (http://imgur.com/50RMP4y)
Got my bits today, thanks again dudes.Pics!
Still waiting for shipping invoice
Be patient young one!
I know it's easy to say, being one of the few who's posted up about their Weaven's arrival...
... However, both it and a are sitting on the side waiting for [url=https://geekhack.org/index.php?topic=41464.0]GH60's. (https://geekhack.org/index.php?topic=45085.0Hammer case[/url)
This is only at seven months from taking orders, GH60's at forty-five!
Be patient young one!
I know it's easy to say, being one of the few who's posted up about their Weaven's arrival...
... However, both it and a are sitting on the side waiting for [url=https://geekhack.org/index.php?topic=41464.0]GH60's. (https://geekhack.org/index.php?topic=45085.0Hammer case[/url)
This is only at seven months from taking orders, GH60's at forty-five!
Seven months when the estimated time was two. GH60's poor outcome is no reason to dismiss the lack of communication and poor handing of this buy - for heaven's sake foggy was in hospital and his own partner didn't even know about, that is no way to run a buy. PayPal protection is also ending in a couple of weeks and people more reputable than these guys have screwed over the community.
Personally, I am just waiting on mine to sell it at this point.
Be patient young one!
I know it's easy to say, being one of the few who's posted up about their Weaven's arrival...
... However, both it and a are sitting on the side waiting for [url=https://geekhack.org/index.php?topic=41464.0]GH60's. (https://geekhack.org/index.php?topic=45085.0Hammer case[/url)
This is only at seven months from taking orders, GH60's at forty-five!
Seven months when the estimated time was two. GH60's poor outcome is no reason to dismiss the lack of communication and poor handing of this buy - for heaven's sake foggy was in hospital and his own partner didn't even know about, that is no way to run a buy. PayPal protection is also ending in a couple of weeks and people more reputable than these guys have screwed over the community.
Personally, I am just waiting on mine to sell it at this point.
foggy's in Vietnam, bazh is in Finland, I don't blame the two. But yes, more communication is greatly needed.
It sucks that this is getting delayed so much. I was and am still looking forward to getting mine but my Paypal protection ends on 12/4. I'm not comfortable leaving that much money in limbo so if does not ship before that date, I'll ask for a refund a couple of days before (or if I have to, I'll open a dispute)
It sucks that this is getting delayed so much. I was and am still looking forward to getting mine but my Paypal protection ends on 12/4. I'm not comfortable leaving that much money in limbo so if does not ship before that date, I'll ask for a refund a couple of days before (or if I have to, I'll open a dispute)
Mine ends 11/28 - a big part of me going in on this buy was that it would ship before protection ran out...
It sucks that this is getting delayed so much. I was and am still looking forward to getting mine but my Paypal protection ends on 12/4. I'm not comfortable leaving that much money in limbo so if does not ship before that date, I'll ask for a refund a couple of days before (or if I have to, I'll open a dispute)
Mine ends 11/28 - a big part of me going in on this buy was that it would ship before protection ran out...
My advice would be to err on the side of caution. It's too easy to get burned
Oh I plan to - I messaged bazh earlier, though he has been on in nearly a week now. Give that a few days before trying too contact him through PayPal. 250$ is just too much time gamble with.
I don't know if you noticed foggy's avatar note; but it's "Amateur Maker". Amateur, not professional mind. Not a fully set up and prepared business with an existing process stream, or fall back communication routes.
They're sub-contracting the manufacture of parts, so they become dependent on others - never great and if I recall correctly there was a hold up (either on this or lustro or both) due to manufacturer/supplier mistake.
Fifty percent of the "business" has been hospitalised - what would happen to massdrop - what would happen to their output under such circumstances do you think?
[shrug]Oh, and I still haven't got my plate (and never will) from the 2012 phantom group buy [/shrug] if the amount of money invested in a blind purchase like this is of concern to you, then don't do it in the first place. I'm not saying throw money away wilfully, but have a think about how likely something is to come to fruition and work from that; the phantom buy was (mostly) successful so I gambled the GH60 would be as good or better - that backfired - the problems with GH60 made me doubt the SmallFry kit's viability so I avoided [...], while Ivan had done a number of key cap group buys he had never done a keyboard group buy... I think you see where I'm going with this. Anything where the goods are not currently produced is a gamble on time, and on finances - will it be finished on time, or at all.
The very nature of the method leaves its self open to many, many failure paths... manufacturers quotes will usually come with provisos on material cost and etcetera, postage rates can suddenly change without warning - and by a massive swing, manufacturers can go bankrupt - there goes the money that was put into them and no product will be forthcoming, people can get ill, people can die!
I don't know if you noticed foggy's avatar note; but it's "Amateur Maker". Amateur, not professional mind. Not a fully set up and prepared business with an existing process stream, or fall back communication routes.
They're sub-contracting the manufacture of parts, so they become dependent on others - never great and if I recall correctly there was a hold up (either on this or lustro or both) due to manufacturer/supplier mistake.
Fifty percent of the "business" has been hospitalised - what would happen to massdrop - what would happen to their output under such circumstances do you think?
[shrug]Oh, and I still haven't got my plate (and never will) from the 2012 phantom group buy [/shrug] if the amount of money invested in a blind purchase like this is of concern to you, then don't do it in the first place. I'm not saying throw money away wilfully, but have a think about how likely something is to come to fruition and work from that; the phantom buy was (mostly) successful so I gambled the GH60 would be as good or better - that backfired - the problems with GH60 made me doubt the SmallFry kit's viability so I avoided [...], while Ivan had done a number of key cap group buys he had never done a keyboard group buy... I think you see where I'm going with this. Anything where the goods are not currently produced is a gamble on time, and on finances - will it be finished on time, or at all.
The very nature of the method leaves its self open to many, many failure paths... manufacturers quotes will usually come with provisos on material cost and etcetera, postage rates can suddenly change without warning - and by a massive swing, manufacturers can go bankrupt - there goes the money that was put into them and no product will be forthcoming, people can get ill, people can die!
I suppose you and I just have different expectations when it comes to doing business. While delays are to be expected, so are genuine shipping estimates in the first place - the manufacturing delay you reference was solved more than eight weeks ago (the entire estimate for this buy!) on its own and I while I empathize with "fifty percent of the business being hospitalized" I do not place faith in a group that cannot even communicate these problems with each other for weeks - let alone their customers.
Whether they want to call themselves amateurs, professionals, or even hobbyists, once they take money for a product they become - above all that - a business. Especially if they profit from it. With that come certain expectations that they need to meet and when they fail, they should expect customers to try an mitigate any losses - in this case through PayPal's protection.
Consumers laying down for this treatment and passing it off just lowers the expectations for future buys.
While I get that people are antsy with the PayPal deadline closing in, I would suggest doing what you feel you have to do without going around telling people they should too.
You are not a customer but a participant in a group buy. Different rules apply.
We are pooling resources to get something made that otherwise wouldn't be made. If you are uncomfortable with that then limit yourself to buying from stores or Massdrop.
I lost my fair share in groupbuys gone wrong (Miami Nights, TX-1800, probably more) I've been in this game long enough to know sometimes life gets in the way and a buy gets delayed. Oftentimes the organizer fails to communicate in these cases but if they are dependant on the updates from their supplier as well they just can't say much more than "No update.". And even if they do people will still ***** at them.
Now we have seen pictures that these were produced and people (including me) have already received theirs. Either you are patient and wait for them to ship, aware that GBs in general have a risk of passing the Paypal deadline.
Otherwise start a dispute if you want, hope Bazh has enough cash lying around to refund you and say goodbye to your board since they will have to sell it to someone else to fund it.
TL;DR: Do what you have to do or be patient and praise the shipping gods.
I would love it if someone back out of their order and bazh has to sell theirs. I'd definitely grab one :D
QuoteI would love it if someone back out of their order and bazh has to sell theirs. I'd definitely grab one :D
Elaeagnifolia mentioned PMing him / her if you want that order or you can have mine I you can actually get ahold of bazh / foggy to switch things over...
Yeah I saw it. But I'll just wait for this buy to end. You never know, it might end well for everyone despite all this stuff that is happening :)
Stay positive people :thumb:
GLWS :)Yeah I saw it. But I'll just wait for this buy to end. You never know, it might end well for everyone despite all this stuff that is happening :)
Stay positive people :thumb:
Despite the delays, I'm still fairly positive that the buy will finish. The reason I'm selling my spot though is because I have waaaay too many keyboards (Specifically 60%s too!). Joining this group buy was an impulse buy that I really shouldn't have made haha. Even if I get the board, I'd just sell it anyway. :(
That's why I was asking to see if anyone wanted to buy my spot, so that the board will directly go to the person who wants it instead of to me first (And upping the price I would sell it at due to cost of shipping). :thumb:
If you're still interested in buying one, PM me and let me know! I'd be happy to work things out with you. :)
Yeah I saw it. But I'll just wait for this buy to end. You never know, it might end well for everyone despite all this stuff that is happening :)
Stay positive people :thumb:
Despite the delays, I'm still fairly positive that the buy will finish. The reason I'm selling my spot though is because I have waaaay too many keyboards (Specifically 60%s too!). Joining this group buy was an impulse buy that I really shouldn't have made haha. Even if I get the board, I'd just sell it anyway. :(
That's why I was asking to see if anyone wanted to buy my spot, so that the board will directly go to the person who wants it instead of to me first (And upping the price I would sell it at due to cost of shipping). :thumb:
If you're still interested in buying one, PM me and let me know! I'd be happy to work things out with you. :)
I'm probably going to either cancel my order or sell my spot (orange sides, gun metal top/bottom) if no developments happen by the end of the upcoming week. Perfect for the recently-shipped GMK Carbon. If anyone's interested, feel free to PM.
Hi everyone,
As you may well known from Bazh's last update, foggy has felt sick, so I'm here to help and take over the handling and shipping work.
About foggy, dude have been diagnosed with autoimmune disease, which is kind of serious health problem if you don't know yet. Poor guy got so bad luck that the disease kick in at the trachea, which cause him hard to breathe and have to go to the hospital like everyday. Even Bazh has not caught up with his condition for foggy has very little communicate with everyone, even friends here in Vietnam, even I didn't know about it till Bazh's recently update and asking. So there's that, the GB was delayed for this but let's hope the guy will be okay and hopefully the doctors were wrong.
Back to the GB, I've just arrived in HCMC yesterday, after a day visiting foggy now I has had access to the office, everything is still here hopefully. I'll start packing things and quoting price for you guys immediately. There's a lot of keyboard cases here and fortunately foggy has done all the prepare work so hopefully things will go smoothly. I'll do my best to help so bare with me if it's a bit slow or something I'm not sure. It's the first time I deal with this much product at once.
Cheers,
Pearvn.
Make round 3 soon please ;D
Feel free to pm me if anybody wants my slot
Weaven is one of the things I was most excited for keyboard wise this year. An update would be much appreciated.
Show Image(http://i.imgur.com/rfbU09S.jpg)
Show Image(http://i.imgur.com/rfbU09S.jpg)
Mind me asking which Dolch set this is?
It's from the Ivan (aka ****) GB from a few years ago
Free bump and PSA for everybody interested in my slot.
I still want a weaven, so anyone who want to sell their slots, please PM me your colors! ;DI have an order of Dolch color (Black & Grey, just like the pic in op), haven't received yet. Let me know if you are interested.
I'm interested in buying anyone's slot, but I don't really know how to use GeekHack. Please pm me with your colors and price on my reddit account /u/T-Mootypus
I still want a weaven, so anyone who want to sell their slots, please PM me your colors! ;DI have an order of Dolch color (Black & Grey, just like the pic in op), haven't received yet. Let me know if you are interested.
Things are likely stuck in customs. I kinda knew this would happen considering they're using someone in Canada to proxy without thinking about this part. :)
Are there any updates on this or Lustro GB? No updates in over a month. Last update was things were being shipped soon.
put in a paypal dispute through the support center with no response yet, but preferably I'd still get this case =/ this kind of thing doesn't normally get held up at customs this long does it?
Are there any updates on this or Lustro GB? No updates in over a month. Last update was things were being shipped soon.
Last time I hear from pear_vn was 2 weeks ago. He said the weaven and lustro were shipped, but they're stucked at custom for months.
put in a paypal dispute through the support center with no response yet, but preferably I'd still get this case =/ this kind of thing doesn't normally get held up at customs this long does it?
put in a paypal dispute through the support center with no response yet, but preferably I'd still get this case =/ this kind of thing doesn't normally get held up at customs this long does it?
Please let me know if you get any updates from this, my deadline for reporting a problem is on the 9th. If we had updates I wouldn't feel like doing this but the lack of communication really bothers me and I'd rather use the money for the board for other things instead of waiting for months with no board.
What more of an update besides "it is stuck in customs for an unknown amount of time" do you want?
Sent from my Pixel XL using Tapatalk
What more of an update besides "it is stuck in customs for an unknown amount of time" do you want?
Sent from my Pixel XL using Tapatalk
What more of an update besides "it is stuck in customs for an unknown amount of time" do you want?
Sent from my Pixel XL using Tapatalk
I asked pear directly if everything had been shipped to Zeal and that satisfied me. But when a month later Zeal says that he hasn't even heard from pear about the shipment then I start to worry. I'd hope that when you expect someone to receive a large shipment that you would let them know.
nothing via paypal dispute, curious if anyones been able to contact anyone besides zeal for this buy at all
Hi friends,
Sorry I just come back from my holiday trip despite stuffs not getting done yet because the trip is planned months ahead.
As for the last time I post, pear_voz did come and help but he didn't get enough time and still have business with his own company so he had to leave soon. Good thing all the boxes then have been moved to new place just waiting to be transfered to the post office.Show Image(https://scontent-arn2-1.xx.fbcdn.net/v/t35.0-12/15820879_1288893777798575_1319077632_o.jpg?oh=e9f78c6a178502d24cb21ec9584de5c2&oe=587B1F54)Show Image(https://scontent-arn2-1.xx.fbcdn.net/v/t35.0-12/15878038_1288893771131909_1298787786_o.jpg?oh=27473a1396a7c4d8d62cd1a93da4ef81&oe=587B2393)
Here's 2 large box, one of which will go straight to Zeal. Other is for Sherry order and non-CONUS order.
Since pear_voz has left for his hometown, we've been looking for some one to hire to complete the shipping stuff. You know it's not like I just hire some random guy since this is a large number of keyboard with (relatively) high value so. Anyway, we had one will do it. The boxes now currently sit at our friend's office, who also have been out of town because he's on an Intel's event for PC modding, which took places some days ago and now they're on special trip after-event. Expecting him to come back in the next couple of days then we can proceed. Also, pear_voz will continue to handling more directly than I will since he's closer thus the timezone would be more appropriate to work on the matter.
Please I know this is unacceptable that the buy is way too long now, but please believe in us. This is a very unfortunate situation we have and I, as some one who just start to get into the market, is very frustrated right now, kinda panic. We will deliver our products as promised since there's no reason the product won't come to you, it's just a matter of bad luck keep happening. I have to work out everything remotely so things just not going as smooth as I thought it would be.
We're definitely moving forward as we're still keyboard lovers and still have many more things we want to do up our sleeves. We'll sort this out at our best for the moment.
Again this is beyond embarrassing, I'm deeply sorry everyone affected by the delay for the inconvenience, hope you understand the situation I am currently in. Please have faith in us that we're doing everything to deliver these buys.
Bazh
He got overconfident that after his leaving the boxes will get shipped right the day after, turned out it got stuck.Hi friends,
Sorry I just come back from my holiday trip despite stuffs not getting done yet because the trip is planned months ahead.
As for the last time I post, pear_voz did come and help but he didn't get enough time and still have business with his own company so he had to leave soon. Good thing all the boxes then have been moved to new place just waiting to be transfered to the post office.Show Image(https://scontent-arn2-1.xx.fbcdn.net/v/t35.0-12/15820879_1288893777798575_1319077632_o.jpg?oh=e9f78c6a178502d24cb21ec9584de5c2&oe=587B1F54)Show Image(https://scontent-arn2-1.xx.fbcdn.net/v/t35.0-12/15878038_1288893771131909_1298787786_o.jpg?oh=27473a1396a7c4d8d62cd1a93da4ef81&oe=587B2393)
Here's 2 large box, one of which will go straight to Zeal. Other is for Sherry order and non-CONUS order.
Since pear_voz has left for his hometown, we've been looking for some one to hire to complete the shipping stuff. You know it's not like I just hire some random guy since this is a large number of keyboard with (relatively) high value so. Anyway, we had one will do it. The boxes now currently sit at our friend's office, who also have been out of town because he's on an Intel's event for PC modding, which took places some days ago and now they're on special trip after-event. Expecting him to come back in the next couple of days then we can proceed. Also, pear_voz will continue to handling more directly than I will since he's closer thus the timezone would be more appropriate to work on the matter.
Please I know this is unacceptable that the buy is way too long now, but please believe in us. This is a very unfortunate situation we have and I, as some one who just start to get into the market, is very frustrated right now, kinda panic. We will deliver our products as promised since there's no reason the product won't come to you, it's just a matter of bad luck keep happening. I have to work out everything remotely so things just not going as smooth as I thought it would be.
We're definitely moving forward as we're still keyboard lovers and still have many more things we want to do up our sleeves. We'll sort this out at our best for the moment.
Again this is beyond embarrassing, I'm deeply sorry everyone affected by the delay for the inconvenience, hope you understand the situation I am currently in. Please have faith in us that we're doing everything to deliver these buys.
Bazh
I am confused. If stuff still hasn't shipped to NA, why did pear_voz tell multiple people (myself included) that it already had?
If anyone wants to sell their spot, pm me on here or on reddit with the same username :thumb:
Hi,
The last few days I've been reevaluating the options since I still didn't feel like hand over the process to some one who's not much familiar with the GB concept and this forum. So I think I would ask for help for sorting and handling from people on here (and in the US). The idea is to ship the whole parcel with all of your case to the proxy so he can help me double check on the sorting and then shipping.I already in talk with Sherraton (Originative) about this and he agreed to help. I haven't asked Zeal (as the original planned proxy for the GB) yet because I felt like the extra work is just too much to ask for, dude has been awesome supporting us from the start. :D
If you're all ok with the new solution then I'll proceed. Then the shipping scene is:
- NA orders will pay parts of VN-US and US domestic shipping fee as planned before.
- non-NA orders will only pay from-US shipping fee, the VN-US fee of these orders are on us.
Please tell me your opinion on the matter, would you be okay with this, and would you be okay if we go with this with Sherraton?
Hi,
The last few days I've been reevaluating the options since I still didn't feel like hand over the process to some one who's not much familiar with the GB concept and this forum. So I think I would ask for help for sorting and handling from people on here (and in the US). The idea is to ship the whole parcel with all of your case to the proxy so he can help me double check on the sorting and then shipping.I already in talk with Sherraton (Originative) about this and he agreed to help. I haven't asked Zeal (as the original planned proxy for the GB) yet because I felt like the extra work is just too much to ask for, dude has been awesome supporting us from the start. :D
If you're all ok with the new solution then I'll proceed. Then the shipping scene is:
- NA orders will pay parts of VN-US and US domestic shipping fee as planned before.
- non-NA orders will only pay from-US shipping fee, the VN-US fee of these orders are on us.
Please tell me your opinion on the matter, would you be okay with this, and would you be okay if we go with this with Sherraton?
Would Sherraton be charging us for the VN to US shipping or would that be through you? I ask because I live very close to Originative and might be able to pick mine up. I also don't want to cause too many headaches though.
The less time it spends in the hands of USPS/Fedex/UPS/DHL the better.
Hi,
The last few days I've been reevaluating the options since I still didn't feel like hand over the process to some one who's not much familiar with the GB concept and this forum. So I think I would ask for help for sorting and handling from people on here (and in the US). The idea is to ship the whole parcel with all of your case to the proxy so he can help me double check on the sorting and then shipping.I already in talk with Sherraton (Originative) about this and he agreed to help. I haven't asked Zeal (as the original planned proxy for the GB) yet because I felt like the extra work is just too much to ask for, dude has been awesome supporting us from the start. :D
If you're all ok with the new solution then I'll proceed. Then the shipping scene is:
- NA orders will pay parts of VN-US and US domestic shipping fee as planned before.
- non-NA orders will only pay from-US shipping fee, the VN-US fee of these orders are on us.
Please tell me your opinion on the matter, would you be okay with this, and would you be okay if we go with this with Sherraton?
Would Sherraton be charging us for the VN to US shipping or would that be through you? I ask because I live very close to Originative and might be able to pick mine up. I also don't want to cause too many headaches though.
The less time it spends in the hands of USPS/Fedex/UPS/DHL the better.
Sherry told me he only ship the case and take money from me so I guess I'll be the one to send invoice after all.
That's fine with me, although it's not exactly clear why we have to change proxies. Whatever gets the boards to the correct place.
The other option available is to let pear_voz continue with the handling/shipping since he plan to come to our place next week and this time he'll be able to stay for a month (that's what I've been told). If we go this route then everything would proceed as first planned (Zeal NA proxy, non-NA order shipping from Vietnam)
The other option available is to let pear_voz continue with the handling/shipping since he plan to come to our place next week and this time he'll be able to stay for a month (that's what I've been told). If we go this route then everything would proceed as first planned (Zeal NA proxy, non-NA order shipping from Vietnam)
Can I get refund instead?
The other option available is to let pear_voz continue with the handling/shipping since he plan to come to our place next week and this time he'll be able to stay for a month (that's what I've been told). If we go this route then everything would proceed as first planned (Zeal NA proxy, non-NA order shipping from Vietnam)
I vote for getting everything out of VN and into Originative's hands ASAP. It looks like a lot of the headache originates from the fact that it's really hard to get a handle of things when it's being done in VN. Getting it in a more controlled environment should help a lot.
**** I forgot to update again. Sorry this week I has been working extra hours all week long so got not much time.
Hey from what I heard from both the GB thread looks like we will go ưith the Originative proxy route, I'm in talk with Sherry to finalize things and prepare to ship.
Expected to have the whole thing shipped to Sherry within 1-2 week.
bazh, what's the update on the shipping? Have these gone to Originative yet?
Participants,
I tried to get in touch with bazh the last couple of days. He said he would have it shipped this week on February 21st, but I have not gotten a reply from him since. I'll try to send an email to see what's up.
bazh, what's the update on the shipping? Have these gone to Originative yet?
Last "update" I have seen (from Sherry in the Lustro thread):Participants,
I tried to get in touch with bazh the last couple of days. He said he would have it shipped this week on February 21st, but I have not gotten a reply from him since. I'll try to send an email to see what's up.
They seem to talk a bit more in that thread, so I recommend keeping an eye there as well (both should be shipping together last we heard).
No updates for this.When this ships are you guys gonna have some to sell on your site?
By the way, today was a very busy day but I'm glad to inform you that I've finished packing every keyboards and everything include weaven, lustro, extra parts...etc will be sent tomorrow morning. Thank you for joining Triviumtek GroupBuy.
Cheers,
I will take a pic when I come to the office :D Just woke up so so late haha. The last time it stuck in Vietnam Custom but I believe that we've done all the paper work and now we are good to go :DBy the way, today was a very busy day but I'm glad to inform you that I've finished packing every keyboards and everything include weaven, lustro, extra parts...etc will be sent tomorrow morning. Thank you for joining Triviumtek GroupBuy.
Cheers,
Great news! Would it be too much trouble to get a picture of a shipping label or something like that? Nothing against you personally, it's just that last time we were told they were shipped they actually hadn't been. :X
Will R3 happen when everything is okay for this round?We are considering it :D
Will R3 happen when everything is okay for this round?We are considering it :D
Updated tracking number for Sherry
Will R3 happen when everything is okay for this round?
is there any extras available? :p
Coming through in a big way!Updated tracking number for Sherry
Received!Will R3 happen when everything is okay for this round?
Yes sir! I got word that R3 will happen if everything goes smoothly.is there any extras available?
We have lots of extras!
Updated tracking number for Sherry
Received!Will R3 happen when everything is okay for this round?
Yes sir! I got word that R3 will happen if everything goes smoothly.is there any extras available? :p
We have lots of extras!
is there any extras available? :p
We have lots of extras!
Originative got a lot of extras for sale :3 abt R3 I will update if anything new :D
This's come from 1 of our beloved customer :3Show Image(https://na.cx/i/zHR34A3.jpg)
This's come from 1 of our beloved customer :3Show Image(https://na.cx/i/zHR34A3.jpg)
I'm not sure how I feel about the space between the bezel of the case and the keycaps.
This's come from 1 of our beloved customer :3Show Image(https://na.cx/i/zHR34A3.jpg)
I'm not sure how I feel about the space between the bezel of the case and the keycaps.
My thoughts exactly. If those gaps could be made smaller between the caps and bezels next round then I'd definitely like to get one.
I saw the gap between the case and the keycaps on the regular version also.This's come from 1 of our beloved customer :3Show Image(https://na.cx/i/zHR34A3.jpg)
I'm not sure how I feel about the space between the bezel of the case and the keycaps.
My thoughts exactly. If those gaps could be made smaller between the caps and bezels next round then I'd definitely like to get one.
this is the winkeyless version..... the original doesn't have that bezel
This's come from 1 of our beloved customer :3Show Image(https://na.cx/i/zHR34A3.jpg)
I saw the gap between the case and the keycaps on the regular version also.This's come from 1 of our beloved customer :3Show Image(https://na.cx/i/zHR34A3.jpg)
I'm not sure how I feel about the space between the bezel of the case and the keycaps.
My thoughts exactly. If those gaps could be made smaller between the caps and bezels next round then I'd definitely like to get one.
this is the winkeyless version..... the original doesn't have that bezel
Like this?This's come from 1 of our beloved customer :3Show Image(https://na.cx/i/zHR34A3.jpg)
I would love one of these Black/Black
Like this?This's come from 1 of our beloved customer :3Show Image(https://na.cx/i/zHR34A3.jpg)
I would love one of these Black/Black
(https://c1.staticflickr.com/3/2831/33529767561_00494d63e8_c.jpg) (https://flic.kr/p/T5UPJH)STT_3153 (https://flic.kr/p/T5UPJH) by Trivium Gallery (https://www.flickr.com/photos/153080526@N07/), trên Flickr
More update!
I received the package. I just got the confirmation that I will be collecting the payment and will handle shipping to your addresses.
More update!
I received the package. I just got the confirmation that I will be collecting the payment and will handle shipping to your addresses.
That's awesome to hear for the participants! Extras were said to be available, any news on these yet?
More update!
I received the package. I just got the confirmation that I will be collecting the payment and will handle shipping to your addresses.
That's awesome to hear for the participants! Extras were said to be available, any news on these yet?
We will know more about extras in a month from now. Our focus is to ship these products out.
More update!
I received the package. I just got the confirmation that I will be collecting the payment and will handle shipping to your addresses.
That's awesome to hear for the participants! Extras were said to be available, any news on these yet?
We will know more about extras in a month from now. Our focus is to ship these products out.
Anyway to sign up for a newsletter about it? I would really like to try and get a black/black.
Slightly off topic, my plan was to use cyan LEDs in my Weaven but I haven't been able to find any. If they exist in either the 1.8mm or the 2x3x4 variety, I would much appreciate being pointed in the right direction.Someone else asked the same on Tapatalk (https://www.tapatalk.com/topic/87368-2190).
If they don't exist, I'll use the white ones I have on hand.
Slightly off topic, my plan was to use cyan LEDs in my Weaven but I haven't been able to find any. If they exist in either the 1.8mm or the 2x3x4 variety, I would much appreciate being pointed in the right direction.
If they don't exist, I'll use the white ones I have on hand.
Slightly off topic, my plan was to use cyan LEDs in my Weaven but I haven't been able to find any. If they exist in either the 1.8mm or the 2x3x4 variety, I would much appreciate being pointed in the right direction.
If they don't exist, I'll use the white ones I have on hand.
Yeah I replied on that Tapatalk thread. If you want greenish Cyan the ones labeled Cyan are the ones in the second link, If you want a lighter blue than most blue LEDs I got the Ice blue ones from DH Gate in the 2x3x4 variety. haven't found in 1.8mm. They do seem to make some contact with my Hydro set so beware YMMV.
Slightly off topic, my plan was to use cyan LEDs in my Weaven but I haven't been able to find any. If they exist in either the 1.8mm or the 2x3x4 variety, I would much appreciate being pointed in the right direction.Someone else asked the same on Tapatalk (https://www.tapatalk.com/topic/87368-2190).
If they don't exist, I'll use the white ones I have on hand.
They seem to be the same as the ones from this 2014 GB (https://geekhack.org/index.php?topic=64915.msg1546646#msg1546646)
Thanks! I'll probably end up getting both colors to see which goes better with the board.
Since they're the 2x3x4 size I'll put them inside the switch to avoid clearance issues with GMK. I've done that with some UV LEDs on a previous build with good success.
Thanks! I'll probably end up getting both colors to see which goes better with the board.
Since they're the 2x3x4 size I'll put them inside the switch to avoid clearance issues with GMK. I've done that with some UV LEDs on a previous build with good success.
Never thought of that since I already had SIPs inside....because I like the Ice blue color way more....hmmmm
Wonder if there will be TKL version in the future?? ;DWe got some tkl design and even a prototype now :3 but we will decide later which model will come to life
Wonder if there will be TKL version in the future?? ;DWe got some tkl design and even a prototype now :3 but we will decide later which model will come to life
It's true that there will be a Triviumtek x zFrontier model and they will be hosting this GB. Further information will appear in GH in a very near future :D stay tuned !!!Wonder if there will be TKL version in the future?? ;DWe got some tkl design and even a prototype now :3 but we will decide later which model will come to life
is this the posting on zfrontier's website?
are you the one hosting that gb if ever?
Wonder if there will be TKL version in the future?? ;DWe got some tkl design and even a prototype now :3 but we will decide later which model will come to life
is this the posting on zfrontier's website?
are you the one hosting that gb if ever?
Still no tracking?
Still no tracking?
Sherry has the boards but hasn't gotten to shipping them yet.
Just sent a pm about that :D every confirmed address will be shipped out today or tmr.Still no tracking?
Sherry has the boards but hasn't gotten to shipping them yet.
Thanks, but unfortunately I am in this side of the world, so there is no way sherry have my weaven
Anw, what do you think abt this :3Is it R3 announcement? ;) you change top corner to for the decrease in free space on the perimeter?Show Image(http://i.imgur.com/6hwJ4jK.jpg)
No, it's not R3 :D it's a concept of the new Spectal keyboard, a tenkeyless version of Weaven. And yes, the space between benzel to keycap will almost vanishAnw, what do you think abt this :3Is it R3 announcement? ;) you change top corner to for the decrease in free space on the perimeter?Show Image(http://i.imgur.com/6hwJ4jK.jpg)
Damn, didn't think to look at plate))) I did not notice that TKL :DNo, it's not R3 :D it's a concept of the new Spectal keyboard, a tenkeyless version of Weaven. And yes, the space between benzel to keycap will almost vanishAnw, what do you think abt this :3Is it R3 announcement? ;) you change top corner to for the decrease in free space on the perimeter?Show Image(http://i.imgur.com/6hwJ4jK.jpg)
Still no tracking?
Sherry has the boards but hasn't gotten to shipping them yet.
Thanks, but unfortunately I am in this side of the world, so there is no way sherry have my weaven
We had few designs for weaven r3 but still not decided which one to go with. But I don't expect we run R3 sooner than August/SeptemberI hope 65% version would come out, would you consider to post vote post at IC board?
It will be an IC but I doubt the 65% will come out :(We had few designs for weaven r3 but still not decided which one to go with. But I don't expect we run R3 sooner than August/SeptemberI hope 65% version would come out, would you consider to post vote post at IC board?
It looks like people in the Lustro thread are receiving their cases from Sherry. I was just wondering if anyone with a Weaven order had heard anything or gotten invoiced for shipping yet?
Still got no trackingPls wait for few days man, the keyboard was sent and we have a ton of receipts from a lot of couriers and we're unable to sort it now. The reason I haven't sent the payment request is I don't know how much does it cost to send yours, so just wait a bit, few peoples received their package but haven't pay the shipping fee because of this.
You said orders are open till March 30th but I don't see where to order. I missed round 1 and I do not want to miss round 2 since this is my "end game" 60% case. :thumb:
Still got no trackingPls wait for few days man, the keyboard was sent and we have a ton of receipts from a lot of couriers and we're unable to sort it now. The reason I haven't sent the payment request is I don't know how much does it cost to send yours, so just wait a bit, few peoples received their package but haven't pay the shipping fee because of this.
Still got no trackingPls wait for few days man, the keyboard was sent and we have a ton of receipts from a lot of couriers and we're unable to sort it now. The reason I haven't sent the payment request is I don't know how much does it cost to send yours, so just wait a bit, few peoples received their package but haven't pay the shipping fee because of this.
Please remind me when will I get tracking number of my package? And there is no way that my order went to Sherry, since I live in SEA, not USA
Hey guys, I just wanted to let you guys know that I'll be invoicing the Weaven this week. Sorry about all the delays, but we have been handling our group buy fulfillment and finally have majority of it finished.
Got both Weaven and Lustro today, but didn't get the zealios switch or stab, anyone know if those come separately?
Hey guys, I just wanted to let you guys know that I'll be invoicing the Weaven this week. Sorry about all the delays, but we have been handling our group buy fulfillment and finally have majority of it finished.
Sherry, is my order went to you as well?
I don't see your name on the list. Please pm me your name so I can confirm.
Got mine, built it, and putting it together and avoiding the button on the bottom of my GH60 from pressing was damn year impossible.
Tried putting an O-ring over it but during assembly the O-ring inevitably moves when trying to piece it all together. I ended up just pull the little rubber button off of the bottom, I was still able to press it just not as easily however closing the case will no longer press it.
Anyone built this with GH60?
So, who is in charge of this whole thing now?
While I received my order in October, I got the wrong parts, because apparently me changing my order was only processed half. I ended up with black long sides and red shorts/feet instead of everything black. I contacted Bazh by PM back then and he said he'd try to get me the black parts, but it would take a while. I haven't heard from him since - tried PMing him a few weeks ago with no luck.
Alternatively, if someone has black short sides and feet and would rather want them in red, I'd be up for a trade. :)
I would like to give my order to you Voiq, but alas they never send my order.....
I would like to give my order to you Voiq, but alas they never send my order.....
I'm very interested now :cool:
Anyone have a sound test for one of these bad boys? Also is the plate soft or stiff? Wondering whether I should choose linears or ergo clears.
Sent from my Pixel using Tapatalk
Anyone have a sound test for one of these bad boys? Also is the plate soft or stiff? Wondering whether I should choose linears or ergo clears.Give me a minute.
Anw, what do you think abt this :3Show Image(http://i.imgur.com/6hwJ4jK.jpg)
Funnily enough I mostly us my left hand completely and my right hand only 3 fingers.peck peck peck peck :))
Funnily enough I mostly us my left hand completely and my right hand only 3 fingers.peck peck peck peck :))
That and the missing spacebar really threw me for a loop. :))
Funnily enough I mostly us my left hand completely and my right hand only 3 fingers.
That and the missing spacebar really threw me for a loop. :))
I have the dark grey ones. They look really cool together with the titaniumFunnily enough I mostly us my left hand completely and my right hand only 3 fingers.
That and the missing spacebar really threw me for a loop. :))
What color feet did you get? I have blue feet and wanted to see if you'd trade... ;)
what happened to my pink one, never received an invoice or anything
been waiting for a reply from sherryton for almost 3 weeks, bazh has never replied to me, never received shipping invoice despite multiple messages to these guys. think i got scammed 250
Just got an email saying extras are available on Oco, was this buy ever completed?
Here are the links:
https://originative.co/products/weaven
https://originative.co/products/lustro
I never received my Weaven. I did contact Sherry. I am not sure if he even received it.
I gave up on this as a loss.
Sherry was just a proxy who bought some extra inventory just like every other participant. The original GB runner is the one who should be held accountable... Not ocoI never received my Weaven. I did contact Sherry. I am not sure if he even received it.
I gave up on this as a loss.
Sorry to hear about your situation, I was on edge of getting this but this just confirmed my doubt about the original buy so I won't be supporting Oco.
Guess I'll just wait to see what Zfrontier has in store.
Seconded. To add a bit to that, boycotting Oco while at the same time continuing to support Triumvtek’s work (through Zfrontier) seems a bit backwards to me.Sherry was just a proxy who bought some extra inventory just like every other participant. The original GB runner is the one who should be held accountable... Not ocoI never received my Weaven. I did contact Sherry. I am not sure if he even received it.
I gave up on this as a loss.
Sorry to hear about your situation, I was on edge of getting this but this just confirmed my doubt about the original buy so I won't be supporting Oco.
Guess I'll just wait to see what Zfrontier has in store.
Sent from my Pixel 2 XL using Tapatalk