Author Topic: [Preorder] TX108se (Finished) (Read 52749 times)

Daggerfall · « **Reply #150 on:** Sun, 31 March 2019, 04:21:04 »

So I updated the Suo software with either FT001.cyacd or FT001-0915.cyacd and the board starting acting totally crazy. The Suo program no longer recognizes it and the board is spouting out keyboard inputs, alt-shortcuts messing everything completely up forcing me to unplug it. Video here:

index=1&list=WL .

The board was working fine until this except I couldn't program it. Is there a way to flash/reset the board somehow?

kin25 · « **Reply #151 on:** Sun, 31 March 2019, 04:59:43 »

Quote from: Daggerfall on Sun, 31 March 2019, 04:21:04

So I updated the Suo software with either FT001.cyacd or FT001-0915.cyacd and the board starting acting totally crazy. The Suo program no longer recognizes it and the board is spouting out keyboard inputs, alt-shortcuts messing everything completely up forcing me to unplug it. Video here:
index=1&list=WL .

The board was working fine until this except I couldn't program it. Is there a way to flash/reset the board somehow?

Sorry it was my mistake.
It is wrong firmware.
I will let you know the solution, plz send email to me. 225ozzy@naver.com

Daggerfall · « **Reply #152 on:** Sun, 31 March 2019, 05:31:36 »

Excellent, I've sent you a mail. Thank you!

Dennyroxsox · « **Reply #153 on:** Sun, 31 March 2019, 19:54:34 »

Quote from: kin25 on Sun, 31 March 2019, 04:59:43

Quote from: Daggerfall on Sun, 31 March 2019, 04:21:04
So I updated the Suo software with either FT001.cyacd or FT001-0915.cyacd and the board starting acting totally crazy. The Suo program no longer recognizes it and the board is spouting out keyboard inputs, alt-shortcuts messing everything completely up forcing me to unplug it. Video here:
index=1&list=WL .

The board was working fine until this except I couldn't program it. Is there a way to flash/reset the board somehow?

Sorry it was my mistake.
It is wrong firmware.
I will let you know the solution, plz send email to me. 225ozzy@naver.com

This fixed it! Thank you!

It took me a while to figure this out, but if anyone doesn't know, here's a link on how to get your VID/HID: https://www.synology.com/en-us/knowledgebase/DSM/tutorial/Compatibility_Peripherals/How_do_I_check_the_PID_VID_of_my_USB_device

kin25 · « **Reply #154 on:** Sun, 31 March 2019, 21:16:52 »

Quote from: Dennyroxsox on Sun, 31 March 2019, 19:54:34

Quote from: kin25 on Sun, 31 March 2019, 04:59:43
Quote from: Daggerfall on Sun, 31 March 2019, 04:21:04
So I updated the Suo software with either FT001.cyacd or FT001-0915.cyacd and the board starting acting totally crazy. The Suo program no longer recognizes it and the board is spouting out keyboard inputs, alt-shortcuts messing everything completely up forcing me to unplug it. Video here:
index=1&list=WL .

The board was working fine until this except I couldn't program it. Is there a way to flash/reset the board somehow?

Sorry it was my mistake.
It is wrong firmware.
I will let you know the solution, plz send email to me. 225ozzy@naver.com

This fixed it! Thank you!

It took me a while to figure this out, but if anyone doesn't know, here's a link on how to get your VID/HID: https://www.synology.com/en-us/knowledgebase/DSM/tutorial/Compatibility_Peripherals/How_do_I_check_the_PID_VID_of_my_USB_device

It was myvmistake.
FT001.cyacd and FT001-0915.cyacd were a old version firmware.
They were made before getting tx vid from usb.org.
So if you will update firmware with these files, the tx108se keyboard would not work.

I changed and uploaded new files. (With new firmware)

txclack · « **Reply #155 on:** Thu, 04 April 2019, 10:39:51 »

Built a 108se for my Pops. Today he told me his keyboard stopped working. Asked him if he potentially shocked the keyboard at all. He does not remember any shock happening, just randomly stopped working as he was typing.

I have the keyboard now in front of me and can't get any PC to recognize it (tried 3 so far). PCB seems dead.

Any suggestions from anyone? I'll be opening it up after work today to see if I can identify any issues with the PCB.

mrpetrov · « **Reply #156 on:** Thu, 04 April 2019, 12:53:04 »

Have you tried fiddling around by moving the usb connection into the pcb? my first pcb had a cold/poorly soldered usb connection and it would turn off all the time if the usb connection / cord got nudged even slightly - i wonder if your board has a similar (albeit worse) problem?

mrpetrov · « **Reply #157 on:** Wed, 10 April 2019, 15:49:37 »

Has anyone been able to get the tx108 software to work? I have version 1.7.0 (no idea where to find a more up to date version).

If I follow Kin's instructions from earlier in this thread it doesn't do anything, I can't bring up any layout. I can't even control any lighting beyond the logo.

Help please Kin/popkorn..? Thanks!

kin25 · « **Reply #158 on:** Wed, 10 April 2019, 17:53:32 »

Quote from: mrpetrov on Wed, 10 April 2019, 15:49:37

Has anyone been able to get the tx108 software to work? I have version 1.7.0 (no idea where to find a more up to date version).

If I follow Kin's instructions from earlier in this thread it doesn't do anything, I can't bring up any layout. I can't even control any lighting beyond the logo.

Help please Kin/popkorn..? Thanks!

I am testing new version firmware and program.
I will release them soon.

Daggerfall · « **Reply #159 on:** Fri, 12 April 2019, 10:38:30 »

Awesome!

mrpetrov · « **Reply #160 on:** Sun, 14 April 2019, 09:30:16 »

Hi Kin

I'm really keen to start using my tx108se! Do you have an estimate as to when the updated software/firmware will be available?

Thanks!
P.

Rumblehotep · « **Reply #161 on:** Tue, 23 April 2019, 23:18:06 »

Any update on the suo108 firmware/program yet?
Keyboard works and I love it but eager to tweak some stuffs :3

mrpetrov · « **Reply #162 on:** Tue, 23 April 2019, 23:35:13 »

Quote from: Rumblehotep on Tue, 23 April 2019, 23:18:06

Any update on the suo108 firmware/program yet?
Keyboard works and I love it but eager to tweak some stuffs :3

Are you able to change the lighting scheme or anything like that on yours?

Rumblehotep · « **Reply #163 on:** Tue, 23 April 2019, 23:50:04 »

Quote from: mrpetrov on Tue, 23 April 2019, 23:35:13

Quote from: Rumblehotep on Tue, 23 April 2019, 23:18:06
Any update on the suo108 firmware/program yet?
Keyboard works and I love it but eager to tweak some stuffs :3

Are you able to change the lighting scheme or anything like that on yours?

I tried loading 1.7 but am getting a blank screen with no keyboard layout after choossing suo108 like popkorn had in her picture.
1.8 wouldn't load at all, and also crashed my mouse somehow.
After restarting I loaded 1.7 again, no layout but I was able to change the lighting scheme and change the logo colors, so can work with this for now I guess.
Thankfully the board is fullsize so pretty much most of the keys I need are covered, but I would like to program the 4 macro keys and some other binds!
also I am using windows 8

ProfCalamitus · « **Reply #164 on:** Wed, 24 April 2019, 07:22:39 »

Quote from: Rumblehotep on Tue, 23 April 2019, 23:50:04

Quote from: mrpetrov on Tue, 23 April 2019, 23:35:13
Quote from: Rumblehotep on Tue, 23 April 2019, 23:18:06
Any update on the suo108 firmware/program yet?
Keyboard works and I love it but eager to tweak some stuffs :3

Are you able to change the lighting scheme or anything like that on yours?

I tried loading 1.7 but am getting a blank screen with no keyboard layout after choossing suo108 like popkorn had in her picture.
1.8 wouldn't load at all, and also crashed my mouse somehow.
After restarting I loaded 1.7 again, no layout but I was able to change the lighting scheme and change the logo colors, so can work with this for now I guess.
Thankfully the board is fullsize so pretty much most of the keys I need are covered, but I would like to program the 4 macro keys and some other binds!
also I am using windows 8

Might be a dumb question, but have you tried running the program as administrator?

Rumblehotep · « **Reply #165 on:** Wed, 24 April 2019, 09:18:34 »

Yup same stuff, no keymap editing

mrpetrov · « **Reply #166 on:** Sat, 27 April 2019, 13:23:39 »

Quote from: mrpetrov on Sun, 14 April 2019, 09:30:16

Hi Kin

I'm really keen to start using my tx108se! Do you have an estimate as to when the updated software/firmware will be available?

Thanks!
P.

Any update Kin? Still can't remap any keys...

mrpetrov · « **Reply #167 on:** Tue, 21 May 2019, 15:08:11 »

Checking in - any news on if/when we can expect a working key remapper?

Thanks very much!

Daggerfall · « **Reply #168 on:** Wed, 12 June 2019, 13:52:19 »

Quote from: kin25 on Wed, 10 April 2019, 17:53:32

Quote from: mrpetrov on Wed, 10 April 2019, 15:49:37
Has anyone been able to get the tx108 software to work? I have version 1.7.0 (no idea where to find a more up to date version).

If I follow Kin's instructions from earlier in this thread it doesn't do anything, I can't bring up any layout. I can't even control any lighting beyond the logo.

Help please Kin/popkorn..? Thanks!

I am testing new version firmware and program.
I will release them soon.

Any news on the new firmware & software?

Capsy · « **Reply #169 on:** Sun, 30 June 2019, 15:49:25 »

Looks like Kin posted a new firmware update yesterday:

https://www.dropbox.com/s/1cd4hj2zjv3l93v/TX%20V2.2.zip?dl=0

The application still does not open up at my end though.

Daggerfall · « **Reply #170 on:** Mon, 01 July 2019, 06:12:15 »

Thanks for the heads up Capsy. I'll have a look later and see how it's working on my end.

Daggerfall · « **Reply #171 on:** Mon, 01 July 2019, 13:05:08 »

Quote from: Daggerfall on Mon, 01 July 2019, 06:12:15

Thanks for the heads up Capsy. I'll have a look later and see how it's working on my end.

The TX V2.2 TX_Device application does not open for me either.

Capsy · « **Reply #172 on:** Mon, 01 July 2019, 13:09:05 »

Quote from: Daggerfall on Mon, 01 July 2019, 13:05:08

Quote from: Daggerfall on Mon, 01 July 2019, 06:12:15
Thanks for the heads up Capsy. I'll have a look later and see how it's working on my end.

The TX V2.2 TX_Device application does not open for me either.

Yeah well kin would have to look into it given that he's moving to suo PCBs for all his boards.

I tried changing the locale to Korea too but didn't help.

Sent from my Pixel 2 XL using Tapatalk

Daggerfall · « **Reply #173 on:** Mon, 01 July 2019, 13:47:14 »

Was really hoping for it to work. The Tx_suo_PCB_v1.7 is the only version where the TX_Device has actually opened. I don't get a keyboard gui/layout there but I can control the lighting. With the 1.8 and the 2.2 the TX_Device exe simply doesn't load

Capsy · « **Reply #174 on:** Mon, 01 July 2019, 13:51:53 »

Yup. Same thing when I tested it. Only 1.7 works. Wonder what the issue is.

Sent from my Pixel 2 XL using Tapatalk

mrpetrov · « **Reply #175 on:** Mon, 08 July 2019, 09:37:26 »

A new version of 2.2 was just released today and...

...it works!

I only tried a single key remap and lighting change, but both worked flawlessly!

https://www.dropbox.com/s/1d5hr8b4e9fcz4i/TX_V2.2.rar?dl=0

Daggerfall · « **Reply #176 on:** Tue, 09 July 2019, 02:14:17 »

Quote from: mrpetrov on Mon, 08 July 2019, 09:37:26

A new version of 2.2 was just released today and...

...it works!

I only tried a single key remap and lighting change, but both worked flawlessly!

https://www.dropbox.com/s/1d5hr8b4e9fcz4i/TX_V2.2.rar?dl=0

Oooooh, this is very exciting. I can't wait to get home from work to test it myself!

Daggerfall · « **Reply #177 on:** Tue, 09 July 2019, 12:12:44 »

Yessss, it works!

~~Now I need to figure out how to change the layout of the board to correspond to my ISO layout, anyone know?~~ nevermind, figured it out.

Thanks for the update Kin25!

Capsy · « **Reply #178 on:** Tue, 09 July 2019, 13:05:23 »

Did you figure out the key to go to the FN layer? The only thing that I couldn't figure out yesterday in the software.

Sent from my Pixel 2 XL using Tapatalk

Rumblehotep · « **Reply #179 on:** Wed, 10 July 2019, 15:15:25 »

Quote from: Capsy on Tue, 09 July 2019, 13:05:23

Did you figure out the key to go to the FN layer? The only thing that I couldn't figure out yesterday in the software.

Sent from my Pixel 2 XL using Tapatalk

I just double clicked the key I wanted to set to FN and clicked on the Fn in the bottom of the layout window.

noblewolf · « **Reply #180 on:** Tue, 02 February 2021, 05:25:47 »

Hello,

I have been a lurker for too long and this is my first post. I have a TX108SE and its working fine.. For the longest time, i want to make the 4 keys above the numpad to be more useful for me but no luck on changing the keymap using the suo software.. I have tried all versions and i can only get a blank window... just, nadah, an all gray screen with a settings button at the upper right corner of the window. Hope to get some help from fellow TX108SE users in the house..

Thank you!

News:

Author Topic: [Preorder] TX108se (Finished) (Read 52749 times)