« previous next »
Pages: « 1 [2] 3 4 »  All   Go Down

Author Topic: [GB] Titanium Plate  (Read 47124 times)

0 Members and 1 Guest are viewing this topic.

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 12275
  • Location: RSTLN E
  • "Do you shovel to survive, or survive to shovel?"
Re: [GB] Titanium Plate
« Reply #50 on: Mon, 17 December 2018, 21:47:41 »
Quote from: pixelpusher on Mon, 17 December 2018, 21:43:24
Quote from: Puddsy on Mon, 17 December 2018, 21:40:14
Quote from: xantiema on Mon, 17 December 2018, 18:07:06
What is the expected price for e.g.. 3mm plate over 1.5mm?

Just remember that cherry switches won't click into a plate over 1.5mm thick. "Thicker" plate designs (5mm) have been milled to depth where the switches click in.

And it's important that they clip in if you have a tray mounted board.  When they don't clip in, the plate can/will slide down the switches and there's not much you can do about it other than add some supports in between the plate and PCB that are exactly the right thickness.

which i may add is a giant pain the ass
Logged
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | ctrl.alt x GON 60% | TGR Alice | Mira SE #29 | Mira SE #34 | Revo One | z | Keycult No. 1 | AIS65 | First CW87 prototype | Mech27v1 | Camp C225 | Duck Orion V1 | LZ CLS sxh | Geon Frog TKL | Hiney TKL One | Geon Glare TKL



"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos, after I came back from a break | "Is Linkshine our Nixon?" -NAV | "Puddsy is the Puddsy of keebs" -ns90

Offline xantiema

  • Posts: 313
  • Location: Denmark
Re: [GB] Titanium Plate
« Reply #51 on: Tue, 18 December 2018, 07:01:56 »
That is good to know  :thumb:

I really want to join, but still don't know which 65% I will buy  :eek:
Logged

Offline DGX_Shin

  • Posts: 77
  • Location: Vietnam
Re: [GB] Titanium Plate
« Reply #52 on: Tue, 18 December 2018, 09:52:40 »
Quote from: Puddsy on Mon, 17 December 2018, 21:40:14
Quote from: xantiema on Mon, 17 December 2018, 18:07:06
What is the expected price for e.g.. 3mm plate over 1.5mm?

Just remember that cherry switches won't click into a plate over 1.5mm thick. "Thicker" plate designs (5mm) have been milled to depth where the switches click in.
We know :). With thicker plate we will cnc a step down to 1.5mm :)

Sent from my INE-LX2 using Tapatalk

Logged

Offline DGX_Shin

  • Posts: 77
  • Location: Vietnam
Re: [GB] Titanium Plate
« Reply #53 on: Tue, 18 December 2018, 09:53:30 »
Quote from: pixelpusher on Mon, 17 December 2018, 21:43:24
Quote from: Puddsy on Mon, 17 December 2018, 21:40:14
Quote from: xantiema on Mon, 17 December 2018, 18:07:06
What is the expected price for e.g.. 3mm plate over 1.5mm?

Just remember that cherry switches won't click into a plate over 1.5mm thick. "Thicker" plate designs (5mm) have been milled to depth where the switches click in.

And it's important that they clip in if you have a tray mounted board.  When they don't clip in, the plate can/will slide down the switches and there's not much you can do about it other than add some supports in between the plate and PCB that are exactly the right thickness.
We understand and have knowledge about that. Thank :)

Sent from my INE-LX2 using Tapatalk

Logged

Offline DGX_Shin

  • Posts: 77
  • Location: Vietnam
Re: [GB] Titanium Plate
« Reply #54 on: Tue, 18 December 2018, 09:55:20 »
Quote from: Puddsy on Mon, 17 December 2018, 21:47:41
Quote from: pixelpusher on Mon, 17 December 2018, 21:43:24
Quote from: Puddsy on Mon, 17 December 2018, 21:40:14
Quote from: xantiema on Mon, 17 December 2018, 18:07:06
What is the expected price for e.g.. 3mm plate over 1.5mm?

Just remember that cherry switches won't click into a plate over 1.5mm thick. "Thicker" plate designs (5mm) have been milled to depth where the switches click in.

And it's important that they clip in if you have a tray mounted board.  When they don't clip in, the plate can/will slide down the switches and there's not much you can do about it other than add some supports in between the plate and PCB that are exactly the right thickness.

which i may add is a giant pain the ass
Yes indeed! We try fulfill your request and if there are any risk of slide / unstable we will notice it for yoh before we run :)

Sent from my INE-LX2 using Tapatalk

Logged

Offline DGX_Shin

  • Posts: 77
  • Location: Vietnam
Re: [GB] Titanium Plate
« Reply #55 on: Tue, 18 December 2018, 09:57:06 »
Quote from: xantiema on Tue, 18 December 2018, 07:01:56
That is good to know  :thumb:

I really want to join, but still don't know which 65% I will buy  :eek:
I have no idea about that but we will open GB for our 65% with in-built blueooth :). It may around mid of Feb :)

Sent from my INE-LX2 using Tapatalk

Logged

Offline booleanjulien

  • Posts: 117
  • Location: Boston, MA
Re: [GB] Titanium Plate
« Reply #56 on: Tue, 18 December 2018, 10:07:30 »
What technique is used to create this holographic anodization on the titanium?

https://imgur.com/a/1bKjLxZ
Logged

Offline DGX_Shin

  • Posts: 77
  • Location: Vietnam
Re: [GB] Titanium Plate
« Reply #57 on: Tue, 18 December 2018, 10:14:09 »
Quote from: booleanjulien on Tue, 18 December 2018, 10:07:30
What technique is used to create this holographic anodization on the titanium?

https://imgur.com/a/1bKjLxZ
In fact i dont know and i don't want to try to make a "holographic" like this :).

Sent from my INE-LX2 using Tapatalk

Logged

Offline xantiema

  • Posts: 313
  • Location: Denmark
Re: [GB] Titanium Plate
« Reply #58 on: Tue, 18 December 2018, 11:00:02 »
65% PCB with inbuilt BlueTooth also with titanium plates? Maybe I should wait for that group buy
Logged

Offline DGX_Shin

  • Posts: 77
  • Location: Vietnam
Re: [GB] Titanium Plate
« Reply #59 on: Tue, 18 December 2018, 11:04:24 »
Quote from: xantiema on Tue, 18 December 2018, 11:00:02
65% PCB with inbuilt BlueTooth also with titanium plates? Maybe I should wait for that group buy
Ah... Don't misunderstand we dont decide yet which will release with the 65 pcb...

Sent from my INE-LX2 using Tapatalk

Logged

Offline cucgach

  • Posts: 124
  • Location: Vietnam
Re: [GB] Titanium Plate
« Reply #60 on: Wed, 19 December 2018, 07:44:40 »
Wow.. good luck with the Gb!
Logged
Current: Filco TKL Majestouch | TX60 antique brass | NIU40 silver | H360 burgundy | tr.mk wooden 60 | Imperial Hue 60 | Tofu 65 silver | Tofu WKL navy | Gergo Kit: black PCB | Space65 gray/silver | VN66 Black
Future: none
Past: TinaC HHKB gray | TX84Se titan gray | Leopold 660M white | GSX96 R2 purple | Rama M60-A lake | 0.01 Z70 silver | E7-V1 MAO | Rama M6-A | TMO50 green/poly | HB85 black/gray | TX108se titan gray | Typewriter68 ceramic white | Think6.5 frost poly

Offline DGX_Shin

  • Posts: 77
  • Location: Vietnam
Re: [GB] Titanium Plate
« Reply #61 on: Wed, 19 December 2018, 07:46:02 »
Quote from: cucgach on Wed, 19 December 2018, 07:44:40
Wow.. good luck with the Gb!
Thanks - Cám ơn :)

Sent from my INE-LX2 using Tapatalk

Logged

Offline peterpans01

  • Thread Starter
  • Posts: 34
Re: [GB] Titanium Plate
« Reply #62 on: Sat, 22 December 2018, 06:54:42 »
Bump, just a little more to reach MOQ.
Have a nice day :D
Logged

Offline _ODIN_

  • Posts: 629
Re: [GB] Titanium Plate
« Reply #63 on: Sat, 22 December 2018, 10:25:27 »
How can you add engraving to your plate?

Gesendet von meinem H8416 mit Tapatalk

Logged

Offline finalarcadia

  • Posts: 408
Re: [GB] Titanium Plate
« Reply #64 on: Sat, 22 December 2018, 14:19:26 »
Anyway you can get files from Wei of Kbdfans for kbd67 ? The 5 mm plate would be nice.

Sent from my Pixel 3 using Tapatalk

Logged

Offline DGX_Shin

  • Posts: 77
  • Location: Vietnam
Re: [GB] Titanium Plate
« Reply #65 on: Sat, 22 December 2018, 14:36:06 »
Quote from: _ODIN_ on Sat, 22 December 2018, 10:25:27
How can you add engraving to your plate?

Gesendet von meinem H8416 mit Tapatalk
CNC with 0.2mm countersink

Sent from my SM-N950N using Tapatalk

Logged

Offline DGX_Shin

  • Posts: 77
  • Location: Vietnam
Re: [GB] Titanium Plate
« Reply #66 on: Sat, 22 December 2018, 14:37:14 »
Quote from: finalarcadia on Sat, 22 December 2018, 14:19:26
Anyway you can get files from Wei of Kbdfans for kbd67 ? The 5 mm plate would be nice.

Sent from my Pixel 3 using Tapatalk
I afriad not :).

Sent from my SM-N950N using Tapatalk

Logged

Offline Lansky

  • Posts: 350
  • Location: Denmark
  • Realest motherthocker
Re: [GB] Titanium Plate
« Reply #67 on: Sat, 22 December 2018, 15:37:55 »
Would it be possible to make a plate for a Realforce 87U?
Logged
Norbaforce (88UB, BKE Heavy, silenced), Noxary XRF (stock 87UB, 55g) Singa R2 (retooled MX Blacks w/ 68g catweewee springs), LZ GH V2 (V1 Zealios 67g), RAMA U80-A (Holy GSUS)

Offline DGX_Shin

  • Posts: 77
  • Location: Vietnam
Re: [GB] Titanium Plate
« Reply #68 on: Sat, 22 December 2018, 15:43:55 »
Quote from: Lansky on Sat, 22 December 2018, 15:37:55
Would it be possible to make a plate for a Realforce 87U?
I afraid not. I dont have any idea about topre -..-'

Sent from my SM-N950N using Tapatalk

Logged

Offline _ODIN_

  • Posts: 629
Re: [GB] Titanium Plate
« Reply #69 on: Sat, 22 December 2018, 16:17:45 »
Filled out the form :)
Logged

Offline KaosJ

  • Posts: 1054
Re: [GB] Titanium Plate
« Reply #70 on: Sun, 23 December 2018, 06:05:50 »
Quote from: DGX_Shin on Tue, 18 December 2018, 10:14:09
Quote from: booleanjulien on Tue, 18 December 2018, 10:07:30
What technique is used to create this holographic anodization on the titanium?

https://imgur.com/a/1bKjLxZ
In fact i dont know and i don't want to try to make a "holographic" like this :).

Sent from my INE-LX2 using Tapatalk

But that one is pretty af
Logged



Offline DGX_Shin

  • Posts: 77
  • Location: Vietnam
Re: [GB] Titanium Plate
« Reply #71 on: Sun, 23 December 2018, 06:08:07 »
Quote from: KaosJ on Sun, 23 December 2018, 06:05:50
Quote from: DGX_Shin on Tue, 18 December 2018, 10:14:09
Quote from: booleanjulien on Tue, 18 December 2018, 10:07:30
What technique is used to create this holographic anodization on the titanium?

https://imgur.com/a/1bKjLxZ
In fact i dont know and i don't want to try to make a "holographic" like this :).

Sent from my INE-LX2 using Tapatalk

But that one is pretty af
I think we may make it on aluminium... Not sure, our artist said that he mau try :). Anyway, we try many way to staify most mechincal keyboard lover :)

Sent from my SM-N950N using Tapatalk

Logged

Offline DGX_Shin

  • Posts: 77
  • Location: Vietnam
Re: [GB] Titanium Plate
« Reply #72 on: Thu, 27 December 2018, 11:37:33 »
Update: It's 13 / 34 Order. Hope that we can reach MOQ 2 :).
Logged

Offline DasGnome

  • Posts: 160
Re: [GB] Titanium Plate
« Reply #73 on: Thu, 27 December 2018, 12:19:14 »
Quote from: DGX_Shin on Thu, 27 December 2018, 11:37:33
Update: It's 13 / 34 Order. Hope that we can reach MOQ 2 :).

Hopefully people starting paying to get MOQ 1, so we can for sure get this GB going. lol

What happens at MOQ 2? :)
Logged

Offline DGX_Shin

  • Posts: 77
  • Location: Vietnam
Re: [GB] Titanium Plate
« Reply #74 on: Thu, 27 December 2018, 12:32:49 »
Quote from: DasGnome on Thu, 27 December 2018, 12:19:14
Quote from: DGX_Shin on Thu, 27 December 2018, 11:37:33
Update: It's 13 / 34 Order. Hope that we can reach MOQ 2 :).

Hopefully people starting paying to get MOQ 1, so we can for sure get this GB going. lol

What happens at MOQ 2? :)
Dear,

 MOQ for discount, not for running :). The GB will run for sure whether it reach MOQ or not.


Sent from my iPhone using Tapatalk
Logged

Offline KaosJ

  • Posts: 1054
Re: [GB] Titanium Plate
« Reply #75 on: Thu, 27 December 2018, 13:17:34 »
Quote from: DGX_Shin on Thu, 27 December 2018, 12:32:49
Quote from: DasGnome on Thu, 27 December 2018, 12:19:14
Quote from: DGX_Shin on Thu, 27 December 2018, 11:37:33
Update: It's 13 / 34 Order. Hope that we can reach MOQ 2 :).

Hopefully people starting paying to get MOQ 1, so we can for sure get this GB going. lol

What happens at MOQ 2? :)
Dear,

 MOQ for discount, not for running :). The GB will run for sure whether it reach MOQ or not.


Sent from my iPhone using Tapatalk

What is the current MOQ? 
do i have to send the file before 28 to join the GB? 
Logged



Offline DGX_Shin

  • Posts: 77
  • Location: Vietnam
Re: [GB] Titanium Plate
« Reply #76 on: Thu, 27 December 2018, 17:04:42 »
Quote from: KaosJ on Thu, 27 December 2018, 13:17:34
Quote from: DGX_Shin on Thu, 27 December 2018, 12:32:49
Quote from: DasGnome on Thu, 27 December 2018, 12:19:14
Quote from: DGX_Shin on Thu, 27 December 2018, 11:37:33
Update: It's 13 / 34 Order. Hope that we can reach MOQ 2 :).

Hopefully people starting paying to get MOQ 1, so we can for sure get this GB going. lol

What happens at MOQ 2? :)
Dear,

 MOQ for discount, not for running :). The GB will run for sure whether it reach MOQ or not.


Sent from my iPhone using Tapatalk

What is the current MOQ? 
do i have to send the file before 28 to join the GB?
Need last 6 confirm for first MOQ.

GB is still open till end of 28

Sent from my SM-N950N using Tapatalk

Logged

Offline booleanjulien

  • Posts: 117
  • Location: Boston, MA
Re: [GB] Titanium Plate
« Reply #77 on: Sat, 29 December 2018, 10:57:20 »
I squeezed in at the last second into this group buy, and am still finalizing my specification. Having not worked with any specialized software for designing plates before, DGX_Shin has been extremely helpful in working with to make my idea a reality- a bent titanium TKL open case:



I will be using this kbfans 8x PCB. I'm posting this here because I still have a chance to make changes to this, and I have a few questions that maybe some of you could help me with.

1. Is it absolutely necessary to have screw holes in the plate? Is there some kind of shim I could screw in from underneath to make sure the PCB is supported / has even distance?

2. Do you think the switch-top opening support look ugly on an open case design, since you'll be able to see the holes? Does it change the sound?

Any suggestions are appreciated. This isn't dependent on changes to this design, but I'm also looking to find any information on how to create a custom fitted underglow diffuser.

Thanks :)
Logged

Offline DGX_Shin

  • Posts: 77
  • Location: Vietnam
Re: [GB] Titanium Plate
« Reply #78 on: Sat, 29 December 2018, 17:38:39 »


Quote from: booleanjulien on Sat, 29 December 2018, 10:57:20
I squeezed in at the last second into this group buy, and am still finalizing my specification. Having not worked with any specialized software for designing plates before, DGX_Shin has been extremely helpful in working with to make my idea a reality- a bent titanium TKL open case:

Show Image


I will be using this kbfans 8x PCB. I'm posting this here because I still have a chance to make changes to this, and I have a few questions that maybe some of you could help me with.

1. Is it absolutely necessary to have screw holes in the plate? Is there some kind of shim I could screw in from underneath to make sure the PCB is supported / has even distance?

2. Do you think the switch-top opening support look ugly on an open case design, since you'll be able to see the holes? Does it change the sound?

Any suggestions are appreciated. This isn't dependent on changes to this design, but I'm also looking to find any information on how to create a custom fitted underglow diffuser.

Thanks :)

You need 4 screw holes at for angle because you may need put a frosted mica below your pcb.

2. I strongly suggest to remove OT support.

Sent from my SM-N950N using Tapatalk

Logged

Offline booleanjulien

  • Posts: 117
  • Location: Boston, MA
Re: [GB] Titanium Plate
« Reply #79 on: Sat, 29 December 2018, 18:33:22 »
I have also asked /r/MechanicalKeyboards on Reddit, and they said I could mount the acrylic directly to the PCB. I think this is what I will do.

I have already sent you an email with the final changes :) Thank you!
Logged

Offline DGX_Shin

  • Posts: 77
  • Location: Vietnam
Re: [GB] Titanium Plate
« Reply #80 on: Sat, 29 December 2018, 20:04:29 »
Quote from: booleanjulien on Sat, 29 December 2018, 18:33:22
I have also asked /r/MechanicalKeyboards on Reddit, and they said I could mount the acrylic directly to the PCB. I think this is what I will do.

I have already sent you an email with the final changes :) Thank you!
Ukie dukie :)

Sent from my SM-N950N using Tapatalk

Logged

Offline JDragon

  • Posts: 469
Re: [GB] Titanium Plate
« Reply #81 on: Sun, 30 December 2018, 11:04:20 »
I just realized I forgot to hit submit on my order after posting about it earlier... :(

Any way to still enter?
Logged

Offline DGX_Shin

  • Posts: 77
  • Location: Vietnam
Re: [GB] Titanium Plate
« Reply #82 on: Sun, 30 December 2018, 11:19:41 »
Quote from: JDragon on Sun, 30 December 2018, 11:04:20
I just realized I forgot to hit submit on my order after posting about it earlier... :(

Any way to still enter?
Dear,

I'm so sorry about this but GB have already close.

Sent from my SM-N950N using Tapatalk

Logged

Offline DGX_Shin

  • Posts: 77
  • Location: Vietnam
Re: [GB] Titanium Plate
« Reply #83 on: Sun, 06 January 2019, 20:58:37 »
Dear all,

First of all i'm sorry for late update :).

1. We reach over MOQ1 so i will refund or it will includes into shipping cost :).

2. Your plates is on the progress but shipping time MAY delay 1 week (we have a some personal issue so please padron us)

3. To guy who choose below 1.5mm, our supplier is no longer get 1.1 and 1.2mm foil so i have emailed you guy to confirm a some solutions. Please reply me when you get my email.
Logged

Offline DGX_Shin

  • Posts: 77
  • Location: Vietnam
Re: [GB] Titanium Plate
« Reply #84 on: Sun, 13 January 2019, 04:45:32 »
Update:
1. Finish cutting
2. On stamp logo and brushing surface. After clean the surface we will anodizing it.

Regard,
Tâm Huỳnh.

Sent from my SM-N950N using Tapatalk

Logged

Offline fer.real

  • Posts: 124
Re: [GB] Titanium Plate
« Reply #85 on: Sun, 13 January 2019, 06:14:02 »
Quote from: DGX_Shin on Sun, 13 January 2019, 04:45:32
Update:
1. Finish cutting
2. On stamp logo and brushing surface. After clean the surface we will anodizing it.

Regard,
Tâm Huỳnh.
Show Image
Show Image
Show Image


Sent from my SM-N950N using Tapatalk

Looking good!  It's exciting to see the progress.
Logged

Offline dangboy

  • Posts: 115
  • Location: California, USA
  • yes
Re: [GB] Titanium Plate
« Reply #86 on: Sun, 13 January 2019, 11:20:24 »
thanks for the update+pics, oooo I can see my plate in there!
Logged

Offline foxmancore

  • Posts: 77
  • Location: Tokyo
Re: [GB] Titanium Plate
« Reply #87 on: Sun, 13 January 2019, 19:05:40 »
looks great :)
Logged

Offline dubious

  • 쏘쿨
  • Posts: 573
  • Location: shralpin the gnar
Re: [GB] Titanium Plate
« Reply #88 on: Thu, 17 January 2019, 15:15:32 »
I think you mentioned somewhere that this is a one time deal, but hopefully you will consider running this again. I think there's enough community interest in plate materials to warrant another GB. I would definitely pick up one or two plates.
Logged

Offline DGX_Shin

  • Posts: 77
  • Location: Vietnam
Re: [GB] Titanium Plate
« Reply #89 on: Thu, 17 January 2019, 16:19:19 »
Quote from: dubious on Thu, 17 January 2019, 15:15:32
I think you mentioned somewhere that this is a one time deal, but hopefully you will consider running this again. I think there's enough community interest in plate materials to warrant another GB. I would definitely pick up one or two plates.

Dear,

I didn’t mention that this is one time gb. I said we have no plan to run another GB yet ^^.


Sent from my iPhone using Tapatalk
Logged

Offline azulyf

  • Posts: 66
Re: [GB] Titanium Plate
« Reply #90 on: Thu, 17 January 2019, 16:47:16 »
The plates look really nice. Wonder will those raw plates be shipped first?
Logged

Offline dubious

  • 쏘쿨
  • Posts: 573
  • Location: shralpin the gnar
Re: [GB] Titanium Plate
« Reply #91 on: Thu, 17 January 2019, 17:51:53 »
Quote from: DGX_Shin on Thu, 17 January 2019, 16:19:19
Quote from: dubious on Thu, 17 January 2019, 15:15:32
I think you mentioned somewhere that this is a one time deal, but hopefully you will consider running this again. I think there's enough community interest in plate materials to warrant another GB. I would definitely pick up one or two plates.

Dear,

I didn’t mention that this is one time gb. I said we have no plan to run another GB yet ^^.


Sent from my iPhone using Tapatalk

Rad!
Logged

Offline TeeAreEffedUp

  • Posts: 15
Re: [GB] Titanium Plate
« Reply #92 on: Fri, 18 January 2019, 18:40:31 »
Quote from: DGX_Shin on Sun, 13 January 2019, 04:45:32
Update:
1. Finish cutting
2. On stamp logo and brushing surface. After clean the surface we will anodizing it.

Regard,
Tâm Huỳnh.
Show Image
Show Image
Show Image


Sent from my SM-N950N using Tapatalk

Hey, I'm pretty sure I see my plate in that big ol stack! Glad to see they're coming along so nicely.
Logged

Offline DasGnome

  • Posts: 160
Re: [GB] Titanium Plate
« Reply #93 on: Mon, 21 January 2019, 11:59:16 »
Any updates?
Logged

Offline DGX_Shin

  • Posts: 77
  • Location: Vietnam
Re: [GB] Titanium Plate
« Reply #94 on: Mon, 21 January 2019, 19:06:20 »
Quote from: DasGnome on Mon, 21 January 2019, 11:59:16
Any updates?
Not yet dear :).

Sent from my SM-N950N using Tapatalk

Logged

Offline obeisa

  • Posts: 16
Re: [GB] Titanium Plate
« Reply #95 on: Thu, 31 January 2019, 14:28:00 »
Can we get an update on this? Thanks.
Logged

Offline DGX_Shin

  • Posts: 77
  • Location: Vietnam
Re: [GB] Titanium Plate
« Reply #96 on: Fri, 01 February 2019, 19:57:38 »
Dear,

First of all I'm so sorry about delay.

I didn't mention about Year End (includes Lunar Year End) so i had gave a wrong estimate timeline. I'm really sorry about that.

We have done engraving and next step we will clean a surface again. But this week, Vietnam is celebrating Lunar Year End and Shipping service will close in this week. Feel sad :(.

After the celebrating week we will start to ship and finish this GB in Feb. Please pardon me (just me not my team) for my mistake.

Regard,
Tâm Huỳnh.

Sent from my SM-N950N using Tapatalk

Logged

Offline DasGnome

  • Posts: 160
Re: [GB] Titanium Plate
« Reply #97 on: Thu, 14 February 2019, 19:52:57 »
Any updates?
Logged

Offline obeisa

  • Posts: 16
Re: [GB] Titanium Plate
« Reply #98 on: Tue, 19 February 2019, 23:24:19 »
Can we get an update please?
Logged

Offline jizzaztartist

  • Posts: 27
Re: [GB] Titanium Plate
« Reply #99 on: Thu, 21 February 2019, 15:29:20 »
Out of curiosity, does anyone know where the plate files for the TiAmo/Titanium TKL keyboard that was run some time ago might be found? I would like to get a Titanium plate for it at some point in the future.
Logged
Pages: « 1 [2] 3 4 »  All   Go Up
« previous next »