Show Image(https://i.imgur.com/8VYz0dE.jpg)
- The brass weight is repositioned inside the case, centred about the alphanumeric keys.
Will people need to put in the correct information the first time round? I think last round, some people just put in random info to get done first and then corrected it later.No one did that in the last round, but the GB form will not be editable this time. :thumb:
Any estimate on the date of the GB? I am in Cuba for next 2 weeks with little to no internet
... Price should be around 550$. Laser cut aluminium plate might be the only switch plate option to keep the cost low.
Any estimate on the date of the GB? I am in Cuba for next 2 weeks with little to no internet
His GBs usually follow a few days after IC from what I remember.
Any estimate on the date of the GB? I am in Cuba for next 2 weeks with little to no internet
His GBs usually follow a few days after IC from what I remember.
yeah usually TGR GBs occur within a week of the IC being posted -- that's how both Alice and Jane v2 went
Any estimate on the date of the GB? I am in Cuba for next 2 weeks with little to no internet
His GBs usually follow a few days after IC from what I remember.
yeah usually TGR GBs occur within a week of the IC being posted -- that's how both Alice and Jane v2 went
Let's be real, this doesn't need an IC.
Ready to try v hard to get a spot.
Let's be real, this doesn't need an IC.
ohhhhh. in on this bb.
question, for those who got in the original jane v2, can we have the option to purchase a steel weight with multi-color coating on the side?
is this weight compatible w v2 case?Toblerone weight will not fit.
ohhhhh. in on this bb.
question, for those who got in the original jane v2, can we have the option to purchase a steel weight with multi-color coating on the side?
the v2 buy only had one toblerone weight option (stainless steel, polished) and you could not buy an extra
I see now...ohhhhh. in on this bb.
question, for those who got in the original jane v2, can we have the option to purchase a steel weight with multi-color coating on the side?
the v2 buy only had one toblerone weight option (stainless steel, polished) and you could not buy an extra
thanks but you didn't answer my question tho lol
I see now...ohhhhh. in on this bb.
question, for those who got in the original jane v2, can we have the option to purchase a steel weight with multi-color coating on the side?
the v2 buy only had one toblerone weight option (stainless steel, polished) and you could not buy an extra
thanks but you didn't answer my question tho lol
Guess that'll be a question for yuktsi.
Sent from my Pixel 2 XL using Tapatalk
I see now...ohhhhh. in on this bb.
question, for those who got in the original jane v2, can we have the option to purchase a steel weight with multi-color coating on the side?
the v2 buy only had one toblerone weight option (stainless steel, polished) and you could not buy an extra
thanks but you didn't answer my question tho lol
Guess that'll be a question for yuktsi.
Sent from my Pixel 2 XL using Tapatalk
The back weight isn't the same (confirmed by yuktsi) so I doubt it
jeez..i want to get off the keyboard train but we keep going full speed ahead.
What shipping method will be used with this beauties? :eek:
That Jane is dressed to kill :cool:
Future GMK sets will now have to include an additional F13 keycap. Maybe even the whole F13-F16 range as an alternative to the usual PrintScreen/ScrollLock/Pause keycaps.
What shipping method will be used with this beauties? :eek:
i imagine sf express, same as every other tgr buy
What shipping method will be used with this beauties? :eek:
i imagine sf express, same as every other tgr buy
Aramex?
What would you guys use that extra key for? While I'd prefer the traditional tkl layout, I'm not against adding that extra key. I just have no idea what I would use it for. Just seems like it'd end up being a dead key for me.
What would you guys use that extra key for? While I'd prefer the traditional tkl layout, I'm not against adding that extra key. I just have no idea what I would use it for. Just seems like it'd end up being a dead key for me.
pornhub macro
What would you guys use that extra key for? While I'd prefer the traditional tkl layout, I'm not against adding that extra key. I just have no idea what I would use it for. Just seems like it'd end up being a dead key for me.
pornhub macro
It just plays La Cucaracha when you press it.
What would you guys use that extra key for? While I'd prefer the traditional tkl layout, I'm not against adding that extra key. I just have no idea what I would use it for. Just seems like it'd end up being a dead key for me.
What would you guys use that extra key for? While I'd prefer the traditional tkl layout, I'm not against adding that extra key. I just have no idea what I would use it for. Just seems like it'd end up being a dead key for me.
Never liked TKLs that much before but damn.
I am not really a TKL fan but DAMN.
What would you guys use that extra key for? While I'd prefer the traditional tkl layout, I'm not against adding that extra key. I just have no idea what I would use it for. Just seems like it'd end up being a dead key for me.
Navy Seal copy pasta
Never liked TKLs that much before but damn.I am not really a TKL fan but DAMN.Show Image(https://media1.tenor.com/images/26114073e498fae525270ebd79ce9bbb/tenor.gif)
That Jane is dressed to kill :cool:F13 best artisan slot
Future GMK sets will now have to include an additional F13 keycap. Maybe even the whole F13-F16 range as an alternative to the usual PrintScreen/ScrollLock/Pause keycaps.
That Jane is dressed to kill :cool:F13 best artisan slot
Future GMK sets will now have to include an additional F13 keycap. Maybe even the whole F13-F16 range as an alternative to the usual PrintScreen/ScrollLock/Pause keycaps.
800 units? lul but def in
Puddsy can you stop posting in here just for a higher post count.
Sent from my SM-G970F using Tapatalk
Puddsy can you stop posting in here just for a higher post count.
Sent from my SM-G970F using Tapatalk
you know exactly how i'll respond to this and exactly what i'm gonna do
Puddsy can you stop posting in here just for a higher post count.
Sent from my SM-G970F using Tapatalk
you know exactly how i'll respond to this and exactly what i'm gonna do
Someone's making the sig!
Be me though ;)
But that's off topic.
Keen for that F13 slot. Nice place to jam an artisan
800 units? lul but def in
what is CE stand for?
what is CE stand for?Cucked edition
what is CE stand for?
what is CE stand for?
what is CE stand for?
curry eggnog
Would this be compatible with the h87a pcb from hineybush?
Gasket? :eek:
Would this be compatible with the h87a pcb from hineybush?
probably not since F13
watchu mean doubt itGasket? :eek:
doubt it
watchu mean doubt itGasket? :eek:
doubt itShow Image(https://i.imgur.com/1Ckp99e.jpg)
watchu mean doubt itGasket? :eek:
doubt itShow Image(https://i.imgur.com/1Ckp99e.jpg)
watchu mean doubt itGasket? :eek:
doubt itShow Image(https://i.imgur.com/1Ckp99e.jpg)
watchu mean doubt itGasket? :eek:
doubt itShow Image(https://i.imgur.com/1Ckp99e.jpg)
Maybe an inside wire like the Keycult No. 2 ?
Will there be a heads up when the GB will start or will it be dropped at any moment? I know from past IC/GB the GB will be launched soon after the IC.
Will there be a heads up when the GB will start or will it be dropped at any moment? I know from past IC/GB the GB will be launched soon after the IC.
GB page usually goes live with a set time on it, so just check every day or something.
;D ;D ;DNone 4 u
Can't wait!
I am in on this. 100%. I hope you find a way to ensure that anyone who wants one can buy one. I would pay more for the cost of that benefit, as I find I am disappointed with the recent limited runs because there is really no way to get a quality custom without overpaying (though, market price arguably) on the second hand market. Much love to your works.
I am in on this. 100%. I hope you find a way to ensure that anyone who wants one can buy one. I would pay more for the cost of that benefit, as I find I am disappointed with the recent limited runs because there is really no way to get a quality custom without overpaying (though, market price arguably) on the second hand market. Much love to your works.
I am in on this. 100%. I hope you find a way to ensure that anyone who wants one can buy one. I would pay more for the cost of that benefit, as I find I am disappointed with the recent limited runs because there is really no way to get a quality custom without overpaying (though, market price arguably) on the second hand market. Much love to your works.
+1. Or at least run the GB for a couple of hours, rewards those who really pay attention to TGR.
I am in on this. 100%. I hope you find a way to ensure that anyone who wants one can buy one. I would pay more for the cost of that benefit, as I find I am disappointed with the recent limited runs because there is really no way to get a quality custom without overpaying (though, market price arguably) on the second hand market. Much love to your works.
Agreed, 100%
I am in on this. 100%. I hope you find a way to ensure that anyone who wants one can buy one. I would pay more for the cost of that benefit, as I find I am disappointed with the recent limited runs because there is really no way to get a quality custom without overpaying (though, market price arguably) on the second hand market. Much love to your works.
I am in on this. 100%. I hope you find a way to ensure that anyone who wants one can buy one. I would pay more for the cost of that benefit, as I find I am disappointed with the recent limited runs because there is really no way to get a quality custom without overpaying (though, market price arguably) on the second hand market. Much love to your works.
Whilst I echo the sentiment that it'd be nice if boards were widely available to anyone that wants them, it's an extremely tough ask - not everyone has the time (or just doesn't want to) test, QC, ship, etc 500-1000+ boards, logistics would be a nightmare for anyone without massive help (which is not something everyone wants to go and find/pay/supervise). Additionally, you can't really drive up the GB prices of these higher end "boutique" boards, or I guess in theory you could since people are buying LZs and CEs etc for 2+ grand but still, I don't think anyone in the community wants to see the prices of this, the No2 or other very sought after boards creep even closer or past $600.
bro how many exclusive keyboards do we needAs many as there are in my Forum Signature.
Can I win one of these pls? Will bribe with rapha kit thx.Gonna need serika with space bar kit or you have no chance of bribery.
Can I win one of these pls? Will bribe with rapha kit thx.Gonna need serika with space bar kit or you have no chance of bribery.
Sent from my SM-G970F using Tapatalk
No board for you thenCan I win one of these pls? Will bribe with rapha kit thx.Gonna need serika with space bar kit or you have no chance of bribery.
Sent from my SM-G970F using Tapatalk
**** i just sold mine
No board for you thenCan I win one of these pls? Will bribe with rapha kit thx.Gonna need serika with space bar kit or you have no chance of bribery.
Sent from my SM-G970F using Tapatalk
**** i just sold mine
Sent from my SM-G970F using Tapatalk
I am in on this. 100%. I hope you find a way to ensure that anyone who wants one can buy one. I would pay more for the cost of that benefit, as I find I am disappointed with the recent limited runs because there is really no way to get a quality custom without overpaying (though, market price arguably) on the second hand market. Much love to your works.
I am in on this. 100%. I hope you find a way to ensure that anyone who wants one can buy one. I would pay more for the cost of that benefit, as I find I am disappointed with the recent limited runs because there is really no way to get a quality custom without overpaying (though, market price arguably) on the second hand market. Much love to your works.
+1 I would as well
The high quantity is probably more gated by quality control and time more than just raw money though sadly.
I am in on this. 100%. I hope you find a way to ensure that anyone who wants one can buy one. I would pay more for the cost of that benefit, as I find I am disappointed with the recent limited runs because there is really no way to get a quality custom without overpaying (though, market price arguably) on the second hand market. Much love to your works.
+1 I would as well
The high quantity is probably more gated by quality control and time more than just raw money though sadly.
I am in on this. 100%. I hope you find a way to ensure that anyone who wants one can buy one. I would pay more for the cost of that benefit, as I find I am disappointed with the recent limited runs because there is really no way to get a quality custom without overpaying (though, market price arguably) on the second hand market. Much love to your works.
+1 I would as well
The high quantity is probably more gated by quality control and time more than just raw money though sadly.
That is the real issue as I understand it. The reason everyone likes these boards is because they are so high quality. In large part because the extensive QC and time/effort/care that goes into them. Moving from ~40-50 to 500+ would seriously diminish the likelihood of being able to achieve that same level of care. It would be nice to see an increase in the amount offered (I'm still trying to get my first TGR board!) but not if it comes at the expense of quality imo.
I am in on this. 100%. I hope you find a way to ensure that anyone who wants one can buy one. I would pay more for the cost of that benefit, as I find I am disappointed with the recent limited runs because there is really no way to get a quality custom without overpaying (though, market price arguably) on the second hand market. Much love to your works.
+1 I would as well
The high quantity is probably more gated by quality control and time more than just raw money though sadly.
That is the real issue as I understand it. The reason everyone likes these boards is because they are so high quality. In large part because the extensive QC and time/effort/care that goes into them. Moving from ~40-50 to 500+ would seriously diminish the likelihood of being able to achieve that same level of care. It would be nice to see an increase in the amount offered (I'm still trying to get my first TGR board!) but not if it comes at the expense of quality imo.
The low production count is likely what causes Sam to be able to maintain such a high quality standard. I think the people who are asking for these huge runs don't really know the consequences for what they are asking for.
I am in on this. 100%. I hope you find a way to ensure that anyone who wants one can buy one. I would pay more for the cost of that benefit, as I find I am disappointed with the recent limited runs because there is really no way to get a quality custom without overpaying (though, market price arguably) on the second hand market. Much love to your works.
+1 I would as well
The high quantity is probably more gated by quality control and time more than just raw money though sadly.
That is the real issue as I understand it. The reason everyone likes these boards is because they are so high quality. In large part because the extensive QC and time/effort/care that goes into them. Moving from ~40-50 to 500+ would seriously diminish the likelihood of being able to achieve that same level of care. It would be nice to see an increase in the amount offered (I'm still trying to get my first TGR board!) but not if it comes at the expense of quality imo.
The low production count is likely what causes Sam to be able to maintain such a high quality standard. I think the people who are asking for these huge runs don't really know the consequences for what they are asking for.
I am in on this. 100%. I hope you find a way to ensure that anyone who wants one can buy one. I would pay more for the cost of that benefit, as I find I am disappointed with the recent limited runs because there is really no way to get a quality custom without overpaying (though, market price arguably) on the second hand market. Much love to your works.
+1 I would as well
The high quantity is probably more gated by quality control and time more than just raw money though sadly.
That is the real issue as I understand it. The reason everyone likes these boards is because they are so high quality. In large part because the extensive QC and time/effort/care that goes into them. Moving from ~40-50 to 500+ would seriously diminish the likelihood of being able to achieve that same level of care. It would be nice to see an increase in the amount offered (I'm still trying to get my first TGR board!) but not if it comes at the expense of quality imo.
The low production count is likely what causes Sam to be able to maintain such a high quality standard. I think the people who are asking for these huge runs don't really know the consequences for what they are asking for.
That's probably true, though, and i only speak for myself, it came more from a position of hope not a position of expectation or demand. I don't think people asking for more quant would want it at the cost of quality.
There are a few indications it may be possible to slightly (nothing close to 800) increase the quantity for this run as it has fewer options and "designed changes made to optimise it for larger production".
Counterpoint: Just as it doesn’t make sense to compare the production output of Rama against Apple’s, you shouldn’t compare Rama to other more hobbyist GB runners either.I am in on this. 100%. I hope you find a way to ensure that anyone who wants one can buy one. I would pay more for the cost of that benefit, as I find I am disappointed with the recent limited runs because there is really no way to get a quality custom without overpaying (though, market price arguably) on the second hand market. Much love to your works.
+1 I would as well
The high quantity is probably more gated by quality control and time more than just raw money though sadly.
That is the real issue as I understand it. The reason everyone likes these boards is because they are so high quality. In large part because the extensive QC and time/effort/care that goes into them. Moving from ~40-50 to 500+ would seriously diminish the likelihood of being able to achieve that same level of care. It would be nice to see an increase in the amount offered (I'm still trying to get my first TGR board!) but not if it comes at the expense of quality imo.
The low production count is likely what causes Sam to be able to maintain such a high quality standard. I think the people who are asking for these huge runs don't really know the consequences for what they are asking for.
That's probably true, though, and i only speak for myself, it came more from a position of hope not a position of expectation or demand. I don't think people asking for more quant would want it at the cost of quality.
There are a few indications it may be possible to slightly (nothing close to 800) increase the quantity for this run as it has fewer options and "designed changes made to optimise it for larger production".
counterpoint: rama makes hundreds of boards (first run of m60 was ~850 boards) held to a similiarly high quality standard
but your point is still valid
Counterpoint: Just as it doesn’t make sense to compare the production output of Rama against Apple’s, you shouldn’t compare Rama to other more hobbyist GB runners either.I am in on this. 100%. I hope you find a way to ensure that anyone who wants one can buy one. I would pay more for the cost of that benefit, as I find I am disappointed with the recent limited runs because there is really no way to get a quality custom without overpaying (though, market price arguably) on the second hand market. Much love to your works.
+1 I would as well
The high quantity is probably more gated by quality control and time more than just raw money though sadly.
That is the real issue as I understand it. The reason everyone likes these boards is because they are so high quality. In large part because the extensive QC and time/effort/care that goes into them. Moving from ~40-50 to 500+ would seriously diminish the likelihood of being able to achieve that same level of care. It would be nice to see an increase in the amount offered (I'm still trying to get my first TGR board!) but not if it comes at the expense of quality imo.
The low production count is likely what causes Sam to be able to maintain such a high quality standard. I think the people who are asking for these huge runs don't really know the consequences for what they are asking for.
That's probably true, though, and i only speak for myself, it came more from a position of hope not a position of expectation or demand. I don't think people asking for more quant would want it at the cost of quality.
There are a few indications it may be possible to slightly (nothing close to 800) increase the quantity for this run as it has fewer options and "designed changes made to optimise it for larger production".
counterpoint: rama makes hundreds of boards (first run of m60 was ~850 boards) held to a similiarly high quality standard
but your point is still valid
I think it’s clear that Rama is meant to be run as a full-time business for those involved, and OP is, well, not.
I am in on this. 100%. I hope you find a way to ensure that anyone who wants one can buy one. I would pay more for the cost of that benefit, as I find I am disappointed with the recent limited runs because there is really no way to get a quality custom without overpaying (though, market price arguably) on the second hand market. Much love to your works.
yes daddy harder
Will have 20-30% more for this round, and I will allocate most of the spots for the GB over here at GH.I am in on this. 100%. I hope you find a way to ensure that anyone who wants one can buy one. I would pay more for the cost of that benefit, as I find I am disappointed with the recent limited runs because there is really no way to get a quality custom without overpaying (though, market price arguably) on the second hand market. Much love to your works.
+1. Or at least run the GB for a couple of hours, rewards those who really pay attention to TGR.
Will have 20-30% more for this round, and I will allocate most of the spots for the GB over here at GH.I am in on this. 100%. I hope you find a way to ensure that anyone who wants one can buy one. I would pay more for the cost of that benefit, as I find I am disappointed with the recent limited runs because there is really no way to get a quality custom without overpaying (though, market price arguably) on the second hand market. Much love to your works.
+1. Or at least run the GB for a couple of hours, rewards those who really pay attention to TGR.
Will have 20-30% more for this round, and I will allocate most of the spots for the GB over here at GH.I am in on this. 100%. I hope you find a way to ensure that anyone who wants one can buy one. I would pay more for the cost of that benefit, as I find I am disappointed with the recent limited runs because there is really no way to get a quality custom without overpaying (though, market price arguably) on the second hand market. Much love to your works.
+1. Or at least run the GB for a couple of hours, rewards those who really pay attention to TGR.
Awesome to hear that we all have a slightly better chance to snag one of these beauties.Will have 20-30% more for this round, and I will allocate most of the spots for the GB over here at GH.I am in on this. 100%. I hope you find a way to ensure that anyone who wants one can buy one. I would pay more for the cost of that benefit, as I find I am disappointed with the recent limited runs because there is really no way to get a quality custom without overpaying (though, market price arguably) on the second hand market. Much love to your works.
+1. Or at least run the GB for a couple of hours, rewards those who really pay attention to TGR.
I'd revised the mounting screws for the internal weight, will use 4*m2.5 screws now instead of m5 seen in the prototype.Show Image(https://i.imgur.com/6UXvmnl.png)
The rest are m3. But you will only need a 2mm allen key for all.I'd revised the mounting screws for the internal weight, will use 4*m2.5 screws now instead of m5 seen in the prototype.Show Image(https://i.imgur.com/6UXvmnl.png)
So with that change all the screws will be M2.5?
The rest are m3. But you will only need a 2mm allen key for all.I'd revised the mounting screws for the internal weight, will use 4*m2.5 screws now instead of m5 seen in the prototype.Show Image(https://i.imgur.com/6UXvmnl.png)
So with that change all the screws will be M2.5?
Show Image(https://i.imgur.com/wHGWfdX.jpg)
:thinking:
I'm so ready for this! Just hope my wallet isIt'll be a hit on the wallet for sure but I'd be more concerned about getting a spot haha. Here's hoping it happens this weekend and not in a workday.
Yuktsi, since we are talking about the screws and out of interest...why is the screw hole of the bottom outer frame in the middle slightly off center (and not in line with the middle screw of the weight)?Hey, that's where the screw goes in the A87u PCB. And I actually find the asymmetry appealing :rolleyes:
The internal brass weight is under the 60% portion of the board basically. Has been since sam was teasing about CE in kustomsShow Image(https://i.imgur.com/wHGWfdX.jpg)
:thinking:
I'm so ready for this! Just hope my wallet isYou may pay a little later. It's okay ;)
Yuktsi, since we are talking about the screws and out of interest...why is the screw hole of the bottom outer frame in the middle slightly off center (and not in line with the middle screw of the weight)?Hey, that's where the screw goes in the A87u PCB. And I actually find the asymmetry appealing :rolleyes:
Hey guys, just a heads up. The GB thread is pending approval at this moment. Will start accepting entries at 11PM Eastern Time, 27th April <3
Hey guys, just a heads up. The GB thread is pending approval at this moment. Will start accepting entries at 11PM Eastern Time, 27th April <3Ooooh niiiiiice :thumb:
Hey guys, just a heads up. The GB thread is pending approval at this moment. Will start accepting entries at 11PM Eastern Time, 27th April <3Time to set an alarm.
Hey guys, just a heads up. The GB thread is pending approval at this moment. Will start accepting entries at 11PM Eastern Time, 27th April <3
Lol, right in the middle of the Portland keeb meetup tonight!
Dont give up, I got my 910 on a phone out of a hotel room!Lol, right in the middle of the Portland keeb meetup tonight!
I know right :-[ , filling this form out on my phone is a sure fire way to not make it in.
Lol, right in the middle of the Portland keeb meetup tonight!
I know right :-[ , filling this form out on my phone is a sure fire way to not make it in.
Dont give up, I got my 910 on a phone out of a hotel room!Lol, right in the middle of the Portland keeb meetup tonight!
I know right :-[ , filling this form out on my phone is a sure fire way to not make it in.
Lol, right in the middle of the Portland keeb meetup tonight!
I know right :-[ , filling this form out on my phone is a sure fire way to not make it in.
Hopefully I can be part of my first TGR group buy!
Hopefully I can be part of my first TGR group buy!
Nice. Good luck! Its a slippery slope you are walking down. Know where to stop tho and don't be like me 😂
Someone told me that this keyboard will be sold as raffle, and not everyone could have one. is this true?They are fcfs usually and to give you some perspective the last event lasted 41 seconds
Someone told me that this keyboard will be sold as raffle, and not everyone could have one. is this true?They are fcfs usually and to give you some perspective the last event lasted 41 seconds
40 in the GB. Some more units privately, so closer to 60+, perhaps. The exact number I do not know.Someone told me that this keyboard will be sold as raffle, and not everyone could have one. is this true?They are fcfs usually and to give you some perspective the last event lasted 41 seconds
I like the idea to limit quantity for better quality and value, but i am upset if i don't get one. How many were produced in last event (JANE V2)?
Will the gb form be editable? Thank you
Will the gb form be editable? Thank you
he said no previously
I am assuming the options will be on the GB thread once it's posted.Will the gb form be editable? Thank you
he said no previously
can we preview the form? would love to see if the multicolor weight option made it
I am assuming the options will be on the GB thread once it's posted.Will the gb form be editable? Thank you
he said no previously
can we preview the form? would love to see if the multicolor weight option made it
Will the gb form be editable? Thank you
he said no previously
can we preview the form? would love to see if the multicolor weight option made it
Made a booboo and lost the screws to my Jane v2.
Can anybody give me the specs on the screws? Specifically the ones for the two weights.
Oops wrong thread lol
If you cant afford it any longer. I will pay for your CE ;Dsmooth
Discord: Cypher#8414
Made a booboo and lost the screws to my Jane v2.
Can anybody give me the specs on the screws? Specifically the ones for the two weights.
Oops wrong thread lol
Made a booboo and lost the screws to my Jane v2.
Can anybody give me the specs on the screws? Specifically the ones for the two weights.
Oops wrong thread lol
WTS TGR screws 250$
Made a booboo and lost the screws to my Jane v2.
Can anybody give me the specs on the screws? Specifically the ones for the two weights.
Oops wrong thread lol
WTS TGR screws 250$