Author Topic: [IC] Ciel - Gasket 60% | CA Vendor and GB Date! (Read 20524 times)

MIGHTY CHICKEN · « **on:** Sun, 19 September 2021, 13:25:28 »

More

Ciel
Ciel, a budget O-Ring gasket mount based on kkatano’s opensource bakeneko60

Feel free to join my discord and fill out the IC form
IC Form
Discord

The Board

Based on the Bakeneko, much of the original design has been kept. Only changes have been the addition of an internal weight and a slight change in the back profile.

Since the original proto, an engraving has been added, bumpons have also been changed to custom silicone feet.

Layouts

Ciel supports normal 60% ansi as well as tsangan bottom row, split right shift, split backspace, and stepped caps lock.

The plate has been modified so that one should be able to use screw-in stabs, in my testing they have worked although it was a little finicky to get right

Misc

There will be extras going on sale at the time of GB, some of these, but not limited to are

Extra Fr4 plates, hotswap and solder PCBs, 50a and 30a o'rings, and daughterboards.

Colors

Burgundy, Blue Grey, Lilac, Black, E-White

Refer to pictures for colors rather than renders

Specifications

- 6061 Aluminum case
- Internal Brass weight
- 6061 Aluminum plate
- PCB: Hotswap (Solder PCB avail for extras)
- Cost: 180 for all colors except E-White, E-White will be 190
- GB Date: Oct 7-Oct 21
- Unlimited GB
- Lead Time of 3~5 months

Vendors:
   -ParamountKeeb | NA
   -Keygem | EU
   -Thic Thock | Asia
-Alpha Keys | CA

Soundtest by NearLucid!

More Images

wahfuhls · « **Reply #1 on:** Sun, 19 September 2021, 13:26:32 »

hi andy

unusuaL_ · « **Reply #2 on:** Sun, 19 September 2021, 13:26:42 »

Good one

Dotnick · « **Reply #3 on:** Sun, 19 September 2021, 13:30:54 »

I'm not sure that's lavender, looks closer to pink or rose gold.

Fraaaan · « **Reply #4 on:** Sun, 19 September 2021, 13:35:12 »

Will solder PCBs have ISO support?

MIGHTY CHICKEN · « **Reply #5 on:** Sun, 19 September 2021, 13:36:08 »

Quote from: Fraaaan on Sun, 19 September 2021, 13:35:12

Will solder PCBs have ISO support?

They will not sadly

MIGHTY CHICKEN · « **Reply #6 on:** Sun, 19 September 2021, 13:38:02 »

Quote from: Dotnick on Sun, 19 September 2021, 13:30:54

I'm not sure that's lavender, looks closer to pink or rose gold.

In-person, it looks a little more purple, def a bit pink. I've shown the sample to some people irl and people have been saying it's purple half the time and pink the other half.

Faehriss · « **Reply #7 on:** Sun, 19 September 2021, 13:52:59 »

yikes no ISO
no ISO, no buy

chat and team · « **Reply #8 on:** Sun, 19 September 2021, 14:34:04 »

Myrkwood · « **Reply #9 on:** Sun, 19 September 2021, 18:57:40 »

nice photos
glwic

NotYellow · « **Reply #10 on:** Sun, 19 September 2021, 23:18:16 »

I love this so much, the colors, the weight, and it being a bakeneko. Just everything is no nice. Just wish that beautiful weight was visible on the outside, but either way I'm most likely gonna buy it.

AASH · « **Reply #11 on:** Mon, 20 September 2021, 04:05:45 »

Any WKL plans? Looks great overall, nice color palette

The_Boom_Boy · « **Reply #12 on:** Mon, 20 September 2021, 04:08:38 »

Very nice design. Would love to see an Oceania vendor

Bub · « **Reply #13 on:** Mon, 20 September 2021, 07:35:01 »

will this be compatible with bakeneko pcb/plate then?

would love to have that option to purchase just the case and maybe daughterboard and transport bakeneko internals

let me know if you need someone to test

anyway im interested

MIGHTY CHICKEN · « **Reply #14 on:** Mon, 20 September 2021, 10:09:12 »

Quote from: AASH on Mon, 20 September 2021, 04:05:45

Any WKL plans? Looks great overall, nice color palette

Just due to the nature of mount, wkl not the most likely to happen

Sent from my iPhone using Tapatalk

MIGHTY CHICKEN · « **Reply #15 on:** Mon, 20 September 2021, 10:15:34 »

Quote from: Bub on Mon, 20 September 2021, 07:35:01

will this be compatible with bakeneko pcb/plate then?

would love to have that option to purchase just the case and maybe daughterboard and transport bakeneko internals

let me know if you need someone to test

anyway im interested

They are not compatible unfortunately, Cannonkeys uses an older version with unikorn mounting points that was taken down due to the mount. Ciel uses the v2 open source mounts.

Sent from my iPhone using Tapatalk

AstralYT · « **Reply #16 on:** Thu, 23 September 2021, 03:57:08 »

There are plenty cnc bakenekos in IC right now, this one looks the best imo. From the two blues shown, definitely prefer the darker, square plate one. What is the thickness of the brass internal weight? Don't even care if it's thin, I hope it does improve acoustics. Would be nice if this came with a carrying case too, even for a little higher price. Do you have CK Bakeneko? A typing test comparison would be nice to compare sound differences due to brass weight and newer V2 open-source mounting points.

Sent from my GM1917 using Tapatalk

jornisen · « **Reply #17 on:** Thu, 23 September 2021, 14:59:46 »

what keycaps are those on the "more pictures"?

MIGHTY CHICKEN · « **Reply #18 on:** Thu, 23 September 2021, 17:55:20 »

Quote from: jornisen on Thu, 23 September 2021, 14:59:46

what keycaps are those on the "more pictures"?

MT3 susuwatari

MIGHTY CHICKEN · « **Reply #19 on:** Thu, 23 September 2021, 17:57:21 »

Quote from: AstralYT on Thu, 23 September 2021, 03:57:08

There are plenty cnc bakenekos in IC right now, this one looks the best imo. From the two blues shown, definitely prefer the darker, square plate one. What is the thickness of the brass internal weight? Don't even care if it's thin, I hope it does improve acoustics. Would be nice if this came with a carrying case too, even for a little higher price. Do you have CK Bakeneko? A typing test comparison would be nice to compare sound differences due to brass weight and newer V2 open-source mounting points.

Sent from my GM1917 using Tapatalk

It's roughly 2.5mm at its thinnest and roughly 6,7 mm at its thickest. I do not have a CK Bakeneko sadly

MIGHTY CHICKEN · « **Reply #20 on:** Thu, 23 September 2021, 18:10:57 »

Alpha Keys will be CA vendor, also GB Date!

KFOXE · « **Reply #21 on:** Thu, 23 September 2021, 21:51:17 »

Would it be possible to see the Pinkish Purpleish Lavender colour sample under a different lighting?

Draxion · « **Reply #22 on:** Fri, 24 September 2021, 10:57:34 »

for sure getting one

MIGHTY CHICKEN · « **Reply #23 on:** Fri, 24 September 2021, 17:39:06 »

Quote from: KFOXE on Thu, 23 September 2021, 21:51:17

Would it be possible to see the Pinkish Purpleish Lavender colour sample under a different lighting?

here ya go
edit: was taken on iphone se, the new one, also is pretty cloudy rn, lightning go boom

More

Sent from my iPhone using Tapatalk

KFOXE · « **Reply #24 on:** Fri, 24 September 2021, 19:26:26 »

Thanks for posting the extra photos! Now I see the purple, kinda reminds me of Nike ACG's Atomic Purple/Violet colour.

Fardesu · « **Reply #25 on:** Sat, 25 September 2021, 01:14:25 »

Do you know how much it weighs? Fully built?

MIGHTY CHICKEN · « **Reply #26 on:** Sat, 25 September 2021, 01:27:58 »

Quote from: Fardesu on Sat, 25 September 2021, 01:14:25

I just bought the Bakeneko60 and I just saw this, nevertheless still gonna cop the black one.
Do you know how much it weighs? Fully built?

Roughly 1.5 Kg

Sent from my iPhone using Tapatalk

Fardesu · « **Reply #27 on:** Sat, 25 September 2021, 01:45:52 »

Is there any sound tests?
Really appreciate it if you can provide us with one.

AASH · « **Reply #28 on:** Sun, 26 September 2021, 11:36:55 »

Quote from: MIGHTY CHICKEN on Mon, 20 September 2021, 10:09:12

Quote from: AASH on Mon, 20 September 2021, 04:05:45
Any WKL plans? Looks great overall, nice color palette
Just due to the nature of mount, wkl not the most likely to happen

Sent from my iPhone using Tapatalk

Unfortunate but understandable! Thanks for your answer

40s, with love

MIGHTY CHICKEN · « **Reply #29 on:** Sun, 26 September 2021, 18:11:43 »

Quote from: Fardesu on Sat, 25 September 2021, 01:45:52

Is there any sound tests?
Really appreciate it if you can provide us with one.

There is a sound test in my discord and Paramountkeeb's server too

Fardesu · « **Reply #30 on:** Mon, 27 September 2021, 08:45:05 »

I saw it, thanks alot for the reply.
Looking forward for the GB!

Senpai_deezy · « **Reply #31 on:** Mon, 27 September 2021, 19:36:22 »

looks so good, might have to join in on this

AstralYT · « **Reply #32 on:** Sun, 03 October 2021, 10:38:39 »

Nearlucid soundtest very poggies

Nearlucid make rebiew pls

Fardesu · « **Reply #33 on:** Mon, 04 October 2021, 05:55:30 »

Sound test got me like :O

SDKCAMPING · « **Reply #34 on:** Mon, 04 October 2021, 18:44:47 »

About time we got a CNC bakeneko!

growler · « **Reply #35 on:** Tue, 05 October 2021, 04:06:33 »

No UK vendor?

Sent from my SM-G980F using Tapatalk

ClerklyTexas · « **Reply #36 on:** Wed, 13 October 2021, 09:12:02 »

I'm having a hard time telling what color the burgundy is. Sometimes it looks cranberry to purple, others it looks, well, burgundy. Do you have any color reference (e.g, Pantone) for the color used? Or maybe a photo alongside something that you know to be neutral gray in the frame? A third way would be a photo in sunlight color balanced at 5500 degrees.

MIGHTY CHICKEN · « **Reply #37 on:** Wed, 13 October 2021, 09:32:46 »

Quote from: ClerklyTexas on Wed, 13 October 2021, 09:12:02

I'm having a hard time telling what color the burgundy is. Sometimes it looks cranberry to purple, others it looks, well, burgundy. Do you have any color reference (e.g, Pantone) for the color used? Or maybe a photo alongside something that you know to be neutral gray in the frame? A third way would be a photo in sunlight color balanced at 5500 degrees.

I’d look at near lucid’s video, it gives a pretty good color reference imo based off where I’m sitting in front of my monitor

Sent from my iPhone using Tapatalk

ClerklyTexas · « **Reply #38 on:** Wed, 13 October 2021, 13:50:28 »

Quote from: MIGHTY CHICKEN on Wed, 13 October 2021, 09:32:46

Quote from: ClerklyTexas on Wed, 13 October 2021, 09:12:02
I'm having a hard time telling what color the burgundy is. Sometimes it looks cranberry to purple, others it looks, well, burgundy. Do you have any color reference (e.g, Pantone) for the color used? Or maybe a photo alongside something that you know to be neutral gray in the frame? A third way would be a photo in sunlight color balanced at 5500 degrees.
I’d look at near lucid’s video, it gives a pretty good color reference imo based off where I’m sitting in front of my monitor

Sent from my iPhone using Tapatalk

That's super helpful. Thanks! I don't see the video linked anywhere on this page, so here it is:

News:

Author Topic: [IC] Ciel - Gasket 60% | CA Vendor and GB Date! (Read 20524 times)