[IC] Chimera65 - 65% Gasket mounted Keyboard from CannonKeys [GB Final Info!]

[upas]

Note: see the 3rd post for final info

Hi again everyone - Upas from CannonKeys here. You might remember my previous design, the Satisfaction 75. I'm here to show my newest project off - the Chimera 65. Like my other ICs, everything from the PCB to the case was designed by yours truly!





Renders: Janglad

IC FORM: https://forms.gle/VffDrtKMDX9ovuRr7


Inspiration:
The name "Chimera" for this board is super fitting. A Chimera is a creature with the head of a lion, body of a goat, and serpent's tail. Basically, a combination of a lot of different creatures. For this design, I drew inspiration from many other keyboards that I admire, and put some of those design elements together in a cohesive way.

Those boards were:
- TGR 910 (Top Right Badge)
- OTD Koala (Side Curve)
- TX boards in general (The ledge)
- TGR Jane (Dual bottom pieces)
- CA66 (Offset Arrows)
- RAMA M60-A (Back accent piece)
- Keycult No 1/65 (Mounting Style)

I also wanted to add my own design element - the bottom is engraved with a beautiful Chimera crest. It looks good in photos, but it looks way better in person! The idea was for the engraving to span multiple parts, similar to how a Chimera is an amalgamation of multiple animals.

A prototype keyboard was shown at the Seattle meetup:





Features:
- QMK and VIA Compatible PCB
- Centered USB-C Unified Daughterboard
- STM32 ARM Processor
- South facing backlight LEDs (single color)
- Poron Gasket Isolation Sandwich Mount
- Poron feet for Desk / Keyboard Isolation
- 7.5 degree typing angle
- 10.86 mm front height (ledge height)
- 17.86 mm front height (not counting ledge height)
- 7 different parts (Top, Bottom, Brass Weight, Back Accent, Bottom Accent, Badge, Plate)
- Super cool Chimera crest engraving created by Hisui
- Fixed plate - your choice of 1 of 2 fixed plates. Materials TBD based on IC.
PCB supports ISO, but plates will be ANSI. Bottom rows: 1.25/1.25/1.25/6.25/1.5/1.5 or 1.5/1.5/7U/1.5/1.5


There are a few parts I might still change, but I'll definitely keep you updated. I like the idea of the double bottom piece, but may change the bottom accent to match the shape of the crest, kind of like how the Singa Unikorn has the brass lion piece bottom. While this would mean the engraving would be limited to a single material, I think it may look a bit cleaner. Please let me know what you think in the IC

The supported layouts are as follows: http://www.keyboard-layout-editor.com/#/gists/dcf11cfb6bc9c806200939aad93e28b2

Colors:
I'm still deciding on final colors, but I have some colors in mind:

Top+Bottom / Back Accent / Bottom Accent / Badge / Bottom Weight

Black Alu / Burgundy Alu / Burgundy Alu / Sandblasted Raw Brass / Sandblasted Raw Brass (Shown in Renders)
Navy Alu / Gold Alu / Navy Alu / Sandblasted Raw Brass / Sandblasted Raw Brass
Dark Grey Alu / Lilac Alu / Lilac Alu / Sandblasted Raw Brass / Sandblasted Raw Brass

The colors won't be mix and match - they will be set color combinations.

If you have any ideas, please leave them in the comment section of the IC form! I may or may not use them.

Current Status:
Two prototypes have been manufactured, and there is a full completed functioning build including PCB. I will make one more round of minor changes, and get that prototyped. Then we will be ready for Group Buy. I want to fulfill S75 before running this board, so that should give you an idea of timeframe.

Expected Price:
This board is 7 separate parts, meaning its going to be expensive. I'd expect the final price for most editions to land somewhere in the $400-$500 range, if not more.

Acknowledgements:
There are a ton of people who helped me throughout this process, again, who I need to thank. This isn't an exhaustive list because I've received help from so many people, but I absolutely need to call out the following folks:

- Otani - Thanks for all the feedback and brainstorming help!
- 159 - GMK Red Samurai is an amazing call - thanks for the advice throughout the process
- Hisui and Rensuya - I couldn't be more thrilled with the artwork. The Chimera crest is fantastic. Thanks!
- riotonthebay - Thanks for sharing all the details I needed to replicate the no1s mounting style
- ai03 - As always, such a great source of advice
- gok - Thanks for helping me figure out some of the ways to make this design better and easier to machine
- Olivia/Wilba - Always eternally grateful for VIA
- janglad - The renders are amazing as always
- All the keyboard designers I drew inspiration from to make this board a reality

Please fill out the IC form: https://forms.gle/VffDrtKMDX9ovuRr7

[upas]

Frequently Asked Questions:

Q: The PCB supports ISO, will there be plate files available?
A: Plate files will be made public as soon as the GB closes.

[upas]

Hey guys, some final updates!

All units will go live for GB on November 23rd at 10AM Eastern Time.
The Group Buy will be open for 2.5 weeks. It will end on Wednesday, December 11th at midnight.

Standard Unit
$475 - 120 Total Units
Aluminum Top, Bottom - Main Color
Aluminum Back Accent, Bottom Crest, Badge - Accent Color
Sandblasted Raw Brass Weight and Plate

Colors:  (Main/Accent)
Black/Burgundy
Grey/Lilac
Navy/Silver


E-white Edition
$495 - 30 Total Units
Aluminum Top, Bottom, Bottom Crest - E White
Sandblasted Raw Brass Weight, Back Accent, Badge, and Plate


Special Edition:
$725
10 Total Units (5 Black, 5 Gold)

Note: I really tried to drive this price down, but PVD is expensive, and doesn't scale well with volume either.

"Angelic"
Aluminum Top, Bottom, Bottom Crest - E White
Gold PVD Brass Weight, Back Accent, and Badge
Raw Brass Sandblasted Plate


"Demonic"
Aluminum Top, Bottom, Bottom Crest - Black
Black PVD Brass Weight, Back Accent, and Badge
Black Carbon Fiber Plate

Extras:
Alu Badge   $12
Alu Crest $20
Alu Back   $37
Brass Badge   $12
Brass Back   $50
PCB w/ Cable + Daughterboard   $60
CF Plate   $40
FR4 Plate   $25

The extra accent pieces (Back, Badge, Crest) will be available in the following colors:
Black
Lilac
Silver
Navy
Grey
Burgundy

Every unit comes with the following 7 pieces:
Top, Bottom, Weight, Crest, Back Accent, Badge, Brass Plate

Along with:
Poron Gaskets
PCB w/ JST Cable and ai03 Unified Daughterboard
Hex Head Hardware
Bumpons

Each keyboard will also ship in a custom fitted CannonKeys hard foam carrying case, as well as a microfiber cloth.
Plates will be available in 6.25U and 7U

Extras will go live at Nov 23rd 12 AM EST (00:00), 10 hours before the group buy goes live, so that they can be added to cart ahead of time.
Remember, the group buy goes live at Nov 23rd 10 AM EST
 A google form will be sent after purchase to select options.

Estimated Delivery: May 2020

Photos:
Black/Burgundy (Photo)


Crest Detail (Photo)


Renders:
Navy/Silver:


Dark Grey/Lilac:


Black/Burgundy:


E-White/Raw Brass:


Demonic:


Angelic:

[V. Vega]

This is a beautiful board, I LOVE the layout so much!
If you go with the Dark Grey/Lilac combo I will absolutely get one.

[Warrenified]

Count me in Upas

[Rensuya]

The name suits this Frankenstein of a keyboard, it's a beauty for sure. This cannot come soon enough 

[BrutalBanana]

Love the design and loving the layout.

Dark Grey Alu / Lilac Alu is what I would be most interested in. I would be also interested to see if there are more unique color combos added or maybe you get some combos based on some current popular key sets.

[bthezebra]

Love the design and loving the layout.

Dark Grey Alu / Lilac Alu is what I would be most interested in. I would be also interested to see if there are more unique color combos added or maybe you get some combos based on some current popular key sets.

I second this

[Pigjackal]

Interested! Would hot-swap be on the table?

[voxkey]

 

[Lil]

In my opinion the burgundy colour of the render is better than the orange-red of the prototype

[evorus5]

Awesome design but the layout isn't for me. Love the Canon blocker though 👍🏽

[Little4Real]

Tsangan bottom row (1.5/1/1.5/7/1) and I'm in

[upas]

Tsangan bottom row (1.5/1/1.5/7/1) and I'm in

This doesn't really work with this layout, with the offset arrows. 1.5/1/1.5/7/1/1 works on the PCB, so if you really wanted that, you could get a plate made.

1.5/1/1.5/7/1 will be available on my Brutal65 (details on that coming later), which will be a much cheaper board.

[bengine]

Ne Chimera60 or Chimera75 in the pipeline?

[Sycomore]

Well thanks Upas, i now know 100% that i need this keyboard to sit alongside my upcoming satisfaction.

[skrunk]

Any chance of a left winkey blocker?

Loving the design by the way!

[_senya]

IMO this was the best board on that meetup. I came back to it 3 times. Interested.

[SoraNoTenshi]

Ayye. Kewl stuff, unfortunately it looks like it is out of my price-range.

But definetly something cool i will follow.

[nasp]

Love everything about this! Looking forward to seeing the 2nd proto

[breckstar]

Every thought about making the surrounding bezel equal distance or close to equal around the keycaps particularly this build has smaller side and top bezels compared to the bottom bezel.

[Slimjim095]

Would there be different color badges?


Sent from my iPhone using Tapatalk

[upas]

Would there be different color badges?


Sent from my iPhone using Tapatalk

This isn't currently planned

[upas]

Interested! Would hot-swap be on the table?

In order to support multiple layouts on the PCB, I'm not planning on making it hotswap.

In my opinion the burgundy colour of the render is better than the orange-red of the prototype

I'm glad, because that's the color I'm going with

IMO this was the best board on that meetup. I came back to it 3 times. Interested.

Thank you for the kind words!

Every thought about making the surrounding bezel equal distance or close to equal around the keycaps particularly this build has smaller side and top bezels compared to the bottom bezel.

It's due to the offset arrows. This bezel configuration looks best given the edge.

Any chance of a left winkey blocker?

Loving the design by the way!

No blockers planned!

Would there be different color badges?


Sent from my iPhone using Tapatalk

No plans on offering different color badges as part of the GB, but I can release the 3D model for the badge so others can get some made after the GB runs.

[Tre3Cycl3S]

Really like the design! Very interested.

I’m not too sure how I feel about the engraving at the bottom. I prefer something simpler (your logo seems perfect here, but it’s already on the blocker, so maybe it’ll be repetitive). Perhaps having the engraving entirely on a single piece like you mentioned might be able to get me totally onboard. But this is a minor point.

Will you be considering adding an option to add foam (between PCB and plate)?

[gotham]

All in on this one 

[BanglesOtter]

This looks pretty cool, love the badge and everything.

[dannyny]

nice logo. in for one if the price is right.

[DuellM]

Any chance for an all white version, missed out on the e-white satisfaction 75 (fraud alert , ended up getting the blue instead). I really want an all white keyboard  .

Sent from my Pixel 3a using Tapatalk

[upas]

Some renders with GMK Voyage on the Navy/Gold Chimera

Note for the logo to match the accent color, you'll have to infill with paint.
The badge will be brass.

[bthezebra]

Some renders with GMK Voyage on the Navy/Gold Chimera

Note for the logo to match the accent color, you'll have to infill with paint.
The badge will be brass.

Show Image

Show Image

Show Image

Show Image

More like oof-pas

[cinnabolt]

Some renders with GMK Voyage on the Navy/Gold Chimera

Note for the logo to match the accent color, you'll have to infill with paint.
The badge will be brass.

Show Image

Show Image

Show Image

Show Image

Looks soooo good. Count me in for a navy kit. Looks so good with GMK Voyage which I am excited for as well.

[MeloDet]

Stop making such nice keyboards UPAS! Gonna have to buy this one too now. Looking forward to seeing the grey and lilac one.

[Faust_]

Will there be split backspace support?

[chive_]

Loving the look of this board! Out of curiosity, has anyone seen any sort of ergonomic advantage to the separated arrow/FN/PgUp/Down keys versus other 65% boards? I figured it'd help prevent accidental presses, but anything else there?

I noticed the new navy renders have a different spacing on the bottom row as well, I think I like that more!

Will there be split backspace support?

Also this

[nasp]

Here's the layout options. I found it in the first post.

http://www.keyboard-layout-editor.com/#/gists/dcf11cfb6bc9c806200939aad93e28b2

[jewel]

Any updates on this IC?

Sent from my LG-H932 using Tapatalk

[Karosu]

im in

[upas]

Any updates on this IC?

Sent from my LG-H932 using Tapatalk

I've designed a new bottom that's more similar to the Singa Unikorn. It's being manufactured and once that's done, I can move on with making decision

One thing I have decided - the Dark Grey / Lilac combo will definitely be offered!

[MeloDet]

Any updates on this IC?

Sent from my LG-H932 using Tapatalk

I've designed a new bottom that's more similar to the Singa Unikorn. It's being manufactured and once that's done, I can move on with making decision

One thing I have decided - the Dark Grey / Lilac combo will definitely be offered!

That's awesome! Looking forward to seeing some renders of that colorway!

[DasGnome]

Dang, might finally have to sell some stuff to fund this beauty!

[blitz]

I know it's not mix and match but would there be extra back accent pieces?

Sent from my LG-H932 using Tapatalk

[iammeuru]

So I'm late to the party chatting about this here, but having seen this at the seattle meetup, and having a lot of time with it after the meetup, I have to say that this is an absolute must buy for me this year... from here to the end of the year, there are literally three must buy boards, and this is one of them... it's awesome!

[Tekniqs]

So I'm late to the party chatting about this here, but having seen this at the seattle meetup, and having a lot of time with it after the meetup, I have to say that this is an absolute must buy for me this year... from here to the end of the year, there are literally three must buy boards, and this is one of them... it's awesome!

this board is for sure on my list as well.

what's the other two if you don't mind me asking?

[forevermadrigal]

Is the layout on the proto going to be supported?

[upas]

I know it's not mix and match but would there be extra back accent pieces?

Sent from my LG-H932 using Tapatalk

I'll definitely consider this. I really like the set colors, but this would allow people to make their own combinations without having to pay for 2 boards.

Is the layout on the proto going to be supported?

Yes, all of these layouts will be supported:
http://www.keyboard-layout-editor.com/#/gists/dcf11cfb6bc9c806200939aad93e28b2

[child]

Can a combination of these be used, eg. 1.25, 1.25, 1.25, 6.25, 1.5, 1.5 ?

[bthezebra]

I know it's not mix and match but would there be extra back accent pieces?

Sent from my LG-H932 using Tapatalk

I'll definitely consider this. I really like the set colors, but this would allow people to make their own combinations without having to pay for 2 boards.

Please do consider it

[nasp]

Can a combination of these be used, eg. 1.25, 1.25, 1.25, 6.25, 1.5, 1.5 ?

Yes, according to the KLE that should be possible

[FredBananaz]

Ooh, this looks good. Definetly interested in this keyboard

[vheissu]

Some renders with GMK Voyage on the Navy/Gold Chimera

Note for the logo to match the accent color, you'll have to infill with paint.
The badge will be brass.

Show Image

Show Image

Show Image

Show Image

Holy mother of god imagine this with GMK Rudy 😍

[upas]

Wanted to show off some new renders:

GMK First Love on Grey/Lilac



GMK Cafe on White/Gold



GMK Delta on Grey/Lilac



GMK Moon Dust on Grey/Lilac



GMK Bingsu on Black/Burgundy

[blitz]

White gold looks amazing...

[antx1701]

I will never be able to afford this, but I want it so bad.

[Lil]

Is white/gold an option under consideration now?

Sent from my G8341 using Tapatalk

[BuildSteady]

I WANT IT

[upas]

Is white/gold an option under consideration now?

Sent from my G8341 using Tapatalk

It is an option I am considering

[forevermadrigal]

Grey/lilac is godlike

[ABrotherThatIsUndercover]

Love this board, can't wait to see it come to fruition and maybe even be able to buy one.

[Tekniqs]

wow that cafe render looks amazing.
s75 coming in, might have to order another Upas board right away.

[h.parks]

I really like the board! Definitely going to ignore my wallet's judgment and grab this the second it goes on sale. Would love to see two things:

• renders of the bottom of the board in the colorways that match the most recent renders.
• a square brass border around the cannon icon on the top right.

[CF73]

Love the gray/lilac combo! How dark is the gray compared to something like the Oblivion alphas and mods?

[henrysharoop]

Grey/Lilac must cop for me.

[upas]

Hey guys,

I've been getting a few questions about status so I figured I'd put some updated in here.

1. It's hard to get good renders of the bottom of the board w/ the engraving. I can get renders, but they won't have the engraving because the engraving is pretty detailed.
2. I'm currently waiting on my factory to make a bottom part w/ the Unikorn like design. If I like that better, I will use it instead of the current rectangular approach on the bottom
3. I've had some damages when shipping my Brutal60 R3 board, especially internationally. There are a few ways to address this (custom packaging), but I hope to come up with a more sustainable solution for the Chimera.

Given these, I'd expect a late October to early November GB for this board.

[DasGnome]

Really hoping that we can buy extra back pieces. Keen to do navy base + red back for SA Yuri

[upas]

Really hoping that we can buy extra back pieces. Keen to do navy base + red back for SA Yuri

I think I will offer extra back pieces. Each keyboard is a set color combination, but extra backs will be available.

The colors I’m thinking of offering are:
Gold
Silver
Burgundy
Black
Lilac

[blitz]

Really hoping that we can buy extra back pieces. Keen to do navy base + red back for SA Yuri

I think I will offer extra back pieces. Each keyboard is a set color combination, but extra backs will be available.

The colors I’m thinking of offering are:
Gold
Silver
Burgundy
Black
Lilac

Gonna need to start saving up if I’m trying to get one of each.


Sent from my iPhone using Tapatalk

[upas]

These renders might have convinced me to build my Chimera out like this!

Featuring KAT Eternal









In terms of updates - it looks like the factory should be done with the new bottom parts that are more unikorn-like.

I'll report back once its all built out with the new bottoms.

[MeloDet]

I'm leaning towards KAT Eternal or GMK Astral Dark myself 

[upas]

Hey guys,

the revised bottoms arrived today. They look great! I'll hopefully have some time this weekend to take some nice photos and post them.

I know its annoying to not have the photos ready now... but I really do think this new way is better!

After this, it's just a matter of making some final decisions and then Chimera will be ready to run!

[upas]

Hey everyone.

Here's a pic of the modified Chimera weight, along with the burgundy back.


I like this one far better, though I'm sad it doesnt span two different pieces.

I think this is what we'll do for production.

Also, this is a sound test:

feature=youtu.be

Group buy should be in late October, after S75 ships

I'll be taking some better photos when the lighting is better.

[MeloDet]

Yo holy **** that looks soo good. I liked the other one but this is something else. Nice job!

[eniigma]

looks good overall, but the edges of the seal look a bit unsymmetric. it would look better if the shape of the actual seal was more uniform.

Sent from my SM-G973U using Tapatalk

[stevevu2816]

i am in for white/gold, holy moly


Sent from my iPhone using Tapatalk

[blitz]

I’m liking the cannon icon the more I look at it...

[glances]

Ahhh this is beautiful!!! Please consider adding a hotswap PCB.

[ivu]

Lovely board and favourite layout. Very very interested into black plus burgundy version. Is it possible to have per key rgb?

Where is it going to ship from? Any chance of EU proxy?

Edit: shipping is from US.

Sent from my SM-N975F using Tapatalk

[NoxNoxNox]

This is such a beautiful board design.  Really liking the Canon accent and the color combinations. 

+1 for Hotswap if its being considered.

[milk]

+1 hotswap, especially if it were a split backspace hotswap!

[upas]

This is such a beautiful board design.  Really liking the Canon accent and the color combinations. 

+1 for Hotswap if its being considered.

Hey guys, unfortunately I don't plan on adding hotswap. I'll consider it if there is ever a round 2 for this board.

Another quick update -
the plan is still to run this once S75 is fulfilled, so the earliest this could run is November. I would expect that sort of timeframe for a group buy!

[sozo]

that grey and lilac is beautiful!

[Jetstream]

This is such a beautiful board design.  Really liking the Canon accent and the color combinations. 

+1 for Hotswap if its being considered.

Hey guys, unfortunately I don't plan on adding hotswap. I'll consider it if there is ever a round 2 for this board.

Another quick update -
the plan is still to run this once S75 is fulfilled, so the earliest this could run is November. I would expect that sort of timeframe for a group buy!

My man!! this is what i like to hear!

[Kristof]

So reading the comments makes me understand that the keyboard will support ISO, but you mention in your first post that PCB supports ISO but the plate does not.
Definitely buying this if it will support ISO so i wanted to ask to make sure

[JSaintS]

So reading the comments makes me understand that the keyboard will support ISO, but you mention in your first post that PCB supports ISO but the plate does not.
Definitely buying this if it will support ISO so i wanted to ask to make sure

He said that the PCB will support ISO but not the plate - he will, however, make the plate files available once the GB closes - we'll thus be able to order from laserboost (we can maybe do a small GB for all ISO users that want the plate?)

[Keymohh]

Yes!! That Grey/Lilac is perfect. Even better than my IC suggestion but still close. Thanks for listening to your people man! Gonna throw Taro right on it and might be sending to NK to build lol

[patientyogurtcloset]

Hotswap pleaseeee

[ozurr]

Would really prefer hot swap.  Reason: Ease of configuring with other/multiple switch types, including modded, at any point in time later.  A one time choice or disassembly and soldering required is not as appealing, especially with so many other customs supporting hot swap.

[MeloDet]

Given that the groupbuy is planned for early to mid November, I'm guessing you are going to be out of luck with regard to hotswap guys. Seems like the PCB design is already complete (or nearly) and unless a hotswap pcb was added as an optional extra, changing the PCB to hotswap would also mean the PCB could only support one of the currently supported layouts.

[KVogh]

Wanted to show off some new renders:

GMK First Love on Grey/Lilac

Show Image

Show Image

GMK Cafe on White/Gold

Show Image

Show Image

GMK Delta on Grey/Lilac

Show Image

Show Image

GMK Moon Dust on Grey/Lilac

Show Image

Show Image

GMK Bingsu on Black/Burgundy

Show Image

Show Image

The white gold looks soooo good. Will absolutely buy ! Great job upas 

[upas]

Would really prefer hot swap.  Reason: Ease of configuring with other/multiple switch types, including modded, at any point in time later.  A one time choice or disassembly and soldering required is not as appealing, especially with so many other customs supporting hot swap.

Hotswap pleaseeee

Given that the groupbuy is planned for early to mid November, I'm guessing you are going to be out of luck with regard to hotswap guys. Seems like the PCB design is already complete (or nearly) and unless a hotswap pcb was added as an optional extra, changing the PCB to hotswap would also mean the PCB could only support one of the currently supported layouts.

MeloDet hit the nail on the head - if this run is super successful, I'd consider possibly running a hotswap PCB variant in a future potential round (if one happens). But typically for these GBs, I prefer solderable PCBs because of the multiple layout support.

[sozo]

are the colors finalized? I hope that white one comes out, definitely a beauty <3

[upas]

are the colors finalized? I hope that white one comes out, definitely a beauty <3

Colors are finalized! I'm waiting on a final quote to set pricing.

[Keymohh]

These renders might have convinced me to build my Chimera out like this!

Featuring KAT Eternal

Show Image

Show Image

Show Image

Show Image

In terms of updates - it looks like the factory should be done with the new bottom parts that are more unikorn-like.

I'll report back once its all built out with the new bottoms.

I come to this thread everyday just to look at these renders. Oooofooofoof Amazing work. I'm trying to get eternal just for this.

[Quantastrophus]

People used to throw so much shade when keyboards were designed like this. Glad to see you're having positive feedback. You may want to consider adding bump-on cutouts on the bottom of the board.

Good luck with the group buy!

[upas]

People used to throw so much shade when keyboards were designed like this. Glad to see you're having positive feedback. You may want to consider adding bump-on cutouts on the bottom of the board.

Good luck with the group buy!

Thanks Quantrik! I added bumpons cutouts to the bottom, so the production version will have those.


I'm still waiting on some final quotes for pricing, but here are the planned colors:

All units will have a top, bottom, and crest piece in the same color.
The bottom weight and plate will be sandblasted raw brass.
The back accent piece and badge will be the same color/material.

Standard units:
These units feature an aluminum back accent piece and badge. They will be available in the following color combinations:
(Main Color / Accent Color)
Navy / Silver
Dark Grey / Lilac
Black / Burgundy

E White Units:
These limited units feature an E-white finish and brass back and badge.
E White / Brass Sandblasted Raw

Special Edition Units:
These limited units feature a PVD coated brass weight, as well as PVD coated back and badge.
These units will be quite expensive, since PVD finishing is expensive.
Black / Brass PVD Black
E- white  / Brass PVD Gold

[ranonranonarat]

sign me up for one now! is there a discord channel going on for this proj?

[upas]

sign me up for one now! is there a discord channel going on for this proj?

Yes! You can join my discord here:
http://discord.gg/gAy6sqp

[vheissu]

there will be some limit for the special editions?

[Nevermore012]

hey @upas, could i have a question, what different between isolation gasket mount and isolation sandswich mount? thanks


Sent from my iPhone using Tapatalk

[upas]

hey @upas, could i have a question, what different between isolation gasket mount and isolation sandswich mount? thanks


Sent from my iPhone using Tapatalk

To me, isolation sandwich mount is a more specific description for isolation gasket mount.
Basically, the gasket provides the isolation. Sandwich describes how its implemented.

For example, someone could make the case that burger mount, which uses O rings to isolate a top-mounted plate is a form of isolation gasket mount.

[HouseOfKeebs]

How does the e-coating compare to anodizing and cerakoting in terms of feel?

[Nevermore012]

hey @upas, could i have a question, what different between isolation gasket mount and isolation sandswich mount? thanks


Sent from my iPhone using Tapatalk

To me, isolation sandwich mount is a more specific description for isolation gasket mount.
Basically, the gasket provides the isolation. Sandwich describes how its implemented.

For example, someone could make the case that burger mount, which uses O rings to isolate a top-mounted plate is a form of isolation gasket mount.

got cha, count me in the GB


Sent from my iPhone using Tapatalk

[bsands]

Love this, I am ready for the GB cus that Lilac is fire.

[upas]

Hey guys, some final updates!

All units will go live for GB on November 23rd at 10AM Eastern Time.
The Group Buy will be open for 2.5 weeks. It will end on Wednesday, December 11th at midnight.

Standard Unit
$475 - 120 Total Units
Aluminum Top, Bottom - Main Color
Aluminum Back Accent, Bottom Crest, Badge - Accent Color
Sandblasted Raw Brass Weight and Plate

Colors:  (Main/Accent)
Black/Burgundy
Grey/Lilac
Navy/Silver


E-white Edition
$495 - 30 Total Units
Aluminum Top, Bottom, Bottom Crest - E White
Sandblasted Raw Brass Weight, Back Accent, Badge, and Plate


Special Edition:
$725
10 Total Units (5 Black, 5 Gold)

Note: I really tried to drive this price down, but PVD is expensive, and doesn't scale well with volume either.

"Angelic"
Aluminum Top, Bottom, Bottom Crest - E White
Gold PVD Brass Weight, Back Accent, and Badge
Raw Brass Sandblasted Plate


"Demonic"
Aluminum Top, Bottom, Bottom Crest - Black
Black PVD Brass Weight, Back Accent, and Badge
Black Carbon Fiber Plate

Extras:
Alu Badge   $12
Alu Crest $20
Alu Back   $37
Brass Badge   $12
Brass Back   $50
PCB w/ Cable + Daughterboard   $60
CF Plate   $40
FR4 Plate   $25

The extra accent pieces (Back, Badge, Crest) will be available in the following colors:
Black
Lilac
Silver
Navy
Grey
Burgundy

Every unit comes with the following 7 pieces:
Top, Bottom, Weight, Crest, Back Accent, Badge, Brass Plate

Along with:
Poron Gaskets
PCB w/ JST Cable and ai03 Unified Daughterboard
Hex Head Hardware
Bumpons

Each case will also ship in a custom fitted CannonKeys hard foam carrying case, as well as a microfiber cloth.
Plates will be available in 6.25U and 7U

Extras will go live at Nov 23rd 12 AM EST (00:00), 10 hours before the group buy goes live, so that they can be added to cart ahead of time.
Remember, the group buy goes live at Nov 23rd 10 AM EST
 A google form will be sent after purchase to select options.

Estimated Delivery: May 2020

Photos:
Black/Burgundy (Photo)


Crest Detail (Photo)


Renders:
Navy/Silver:


Dark Grey/Lilac:


Black/Burgundy:


E-White/Raw Brass:


Demonic:


Angelic:

[MeloDet]

I'm assuming plate files we available like with your past projects? Definitely looking forward to this

[upas]

I'm assuming plate files we available like with your past projects? Definitely looking forward to this

Yes they will!

[GPrix]

So, upas, I’ll have to be pretty fast to check out both special editions at the same time, huh? 😅

[persocom]

Got an alert set up for this now! hoping to catch an e-white

[upas]

After some discussion in my discord, I am considering moving the SE FCFS sale 30 min - 1 hour before the rest of the sale.
The reason is it could allow for people to try for an SE unit, and then try for an E-white unit later if they miss out on the SE unit.

I'll continue to consider this - I can't really see any downsides but please let me know!

[Nevermore012]

that's fair Upas, but I think raffle is also a option, you can open the form with limit time, and raffle before open the GB.

[j135]

Will there be any more photos? Still deciding to buy or not :/

[Ld1993]

Could you possibly create a render with which board you believe would look best with Olivia, given that it is re-releasing soon?

[j135]

Could you possibly create a render with which board you believe would look best with Olivia, given that it is re-releasing soon?

I think the Olivia looks pretty similar to gmk Cafe which is in the white and brass render. I think the white and brass boards would look really good with cafe and Olivia

[Ld1993]

Could you possibly create a render with which board you believe would look best with Olivia, given that it is re-releasing soon?

I think the Olivia looks pretty similar to gmk Cafe which is in the white and brass render. I think the white and brass boards would look really good with cafe and Olivia

Good point. I looked at the renders again and they look phenomenal!

[upas]

I tried to come up with a better way to run the Special Edition - unfortunately I won't have time to finish the system, so it's official:

The SPECIAL EDITION FCFS sale will start at 9am EST on Nov 23rd.
E WHITE and NORMAL Edition FCFS sale starts at 10am EST on Nov 23rd.

[vidoardes]

That white and gold is beautiful! Hopefully I get lucky on the sale

Sent from my Pixel 3 XL using Tapatalk

[Critical_Thinker_]

Do the prices above include shipping?

[DukeEsquire]

Do the prices above include shipping?

I can't imagine why they would since people live all around the world.

[upas]

Do the prices above include shipping?

They do not

[octix]

Cannot wait!

[upas]

Group buy topic is live, so I'm locking this one!

https://geekhack.org/index.php?topic=103528.0