Post by: supernova on Tue, 23 June 2020, 09:10:59
覧覧覧覧覧覧覧覧覧覧覧覧
Hello everyone，i'm very happy to introduce to you a small toy I designed in 2020。
It is a desktop toy and a desktop tool that can help you solve the trouble of not finding the screws and falling the screws。
This was the original intention when I first designed it, in order to solve the problem.
In this June, I have completed its design draft. And the first functional proofing. It is going very smoothly.
Below, please take a look at some of its renderings。
[attachimg=1]
[attachimg=2]
[attachimg=3]
This is the structural analysis rendering of the tray。
[attachimg=4]
The 3D printed samples in early March were painted on the surface and model varnish。
[attachimg=5]
Update picture of the sample in my hand
[attachimg=7]
I may start this project after Christmas。
[attachimg=6]
Post by: Jae-3soteric on Tue, 23 June 2020, 09:14:35
Sent from my iPhone using Tapatalk Pro
Post by: fcoury on Tue, 23 June 2020, 09:27:28
Post by: Sabin on Tue, 23 June 2020, 09:31:25
Post by: nu_types on Tue, 23 June 2020, 09:33:59
Jokes aside, this is pretty neat, and I'll probably pick one up.
Post by: A.Belousov on Tue, 23 June 2020, 09:39:24
Post by: supernova on Tue, 23 June 2020, 09:46:40
These look dope, any idea of dimensions and material of the tray?These are just renderings, please refer to the actual product，lol
To be honest, its size is 80*80*40, it will be very small in the hand. Place screws, wire. Will be very suitable. I will use 6061 aluminum and copper to achieve it. Using anodizing, PVD and other surface processes
Post by: OJtheTiny on Tue, 23 June 2020, 09:49:53
Post by: supernova on Tue, 23 June 2020, 10:07:53
Interesting, any estimates of how much it will cost?I have consulted the processing plant. The individual processing cost is about 45 dollars. Apart from the cost of packaging and early testing, I think it should be able to be controlled at 70 dollars in the end.
Post by: BapoDonu on Tue, 23 June 2020, 10:24:41
Post by: FRANCO on Tue, 23 June 2020, 11:07:24
Post by: Tom_Kazansky on Tue, 23 June 2020, 11:15:21
I need some trays to hold components (diodes, resistors) for soldering :D
Post by: OJtheTiny on Tue, 23 June 2020, 11:16:14
interested!Magnetic trays might be overkill for that lol
I need some trays to hold components (diodes, resistors) for soldering :D
Post by: SuddenlyDonkey on Tue, 23 June 2020, 11:50:39
Post by: i luv chuletas on Tue, 23 June 2020, 12:25:48
Might have to grab a couple
Post by: Zacharius on Tue, 23 June 2020, 13:19:40
Sent from my iPhone using Tapatalk
Post by: Puddsy on Tue, 23 June 2020, 23:22:44
Post by: supernova on Tue, 23 June 2020, 23:46:07
any idea on price? this is actually really prettyI have consulted the processing plant. The individual processing cost is about 45 dollars. Apart from the cost of packaging and early testing, I think it should be able to be controlled at 70 dollars in the end.
Post by: nmur on Tue, 23 June 2020, 23:47:32
Post by: Xemnova on Wed, 24 June 2020, 01:34:39
Post by: hottrout on Wed, 24 June 2020, 02:55:52
Post by: supernova on Thu, 25 June 2020, 06:54:34
Post by: kaisn on Thu, 25 June 2020, 06:57:48
Post by: Zacharius on Thu, 25 June 2020, 11:48:55
Sent from my iPhone using Tapatalk
Post by: hottrout on Thu, 25 June 2020, 17:54:44
Post by: supernova on Tue, 30 June 2020, 17:29:30
通过我的 OnePlus 7 Pro 上的 Tapatalk发言
Post by: iZac02 on Wed, 01 July 2020, 02:06:43
Post by: KRY2SOON on Wed, 01 July 2020, 03:03:42
Post by: supernova on Wed, 01 July 2020, 05:30:34
if this is affordable, ill buy 62I shared the estimated price directly, and finally it should be able to be controlled within $70
通过我的 OnePlus 7 Pro 上的 Tapatalk发言
Post by: supernova on Tue, 07 July 2020, 04:40:24
Post by: Kerasan on Wed, 08 July 2020, 05:39:40
Post by: Space_Case88 on Wed, 08 July 2020, 06:17:10
Post by: JCraftCables on Wed, 08 July 2020, 06:47:22
Post by: jedidood on Wed, 08 July 2020, 14:23:34
Post by: supernova on Wed, 08 July 2020, 18:06:20
Link for discord?here is
https://discord.gg/bZ3NsFD）
通过我的 OnePlus 7 Pro 上的 Tapatalk发言
Post by: Hugs94 on Wed, 08 July 2020, 22:00:30
NE Polycarb edition
Post by: supernova on Thu, 09 July 2020, 22:32:17
Oh looks really cool. I like how deep and wide it is.
NE Polycarb edition
thanks，bro
Post by: supernova on Sun, 19 July 2020, 23:39:05
Post by: supernova on Mon, 03 August 2020, 04:56:58
Post by: jAngeles on Mon, 03 August 2020, 06:11:18
Post by: SurlySheep on Tue, 04 August 2020, 19:19:54
Nonetheless, if there's ever a red or dark navy magnet tary, I'll be very interested :o
Post by: suorindrop on Tue, 04 August 2020, 21:10:53
Post by: The.Ryan.Gamer on Tue, 04 August 2020, 22:10:08
Post by: SlipperyPeteED on Tue, 04 August 2020, 22:53:23
Post by: hottrout on Wed, 05 August 2020, 04:27:33
Post by: Anthixious on Sun, 09 August 2020, 01:24:11
Post by: supernova on Sun, 09 August 2020, 02:15:27
Discord link is still broken/not working. Interested in this project also!! Looks you have a great thing going here!
Sorry, this is my newly generated invitation link：https://discord.gg/bZ3NsFD
Post by: supernova on Sun, 09 August 2020, 02:25:20
Your Discord link does not work. I am interested in one of these 1st time round.Sorry, this is my newly generated invitation link：https://discord.gg/bZ3NsFD
Post by: EdgeOfInfinity on Thu, 14 January 2021, 11:15:06